linux_dsm_epyc7002/arch/powerpc/include/asm/hw_irq.h

173 lines
3.8 KiB
C
Raw Normal View History

/*
* Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
*/
#ifndef _ASM_POWERPC_HW_IRQ_H
#define _ASM_POWERPC_HW_IRQ_H
#ifdef __KERNEL__
#include <linux/errno.h>
#include <linux/compiler.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
extern void timer_interrupt(struct pt_regs *);
#ifdef CONFIG_PPC64
#include <asm/paca.h>
static inline unsigned long local_get_flags(void)
{
unsigned long flags;
__asm__ __volatile__("lbz %0,%1(13)"
: "=r" (flags)
: "i" (offsetof(struct paca_struct, soft_enabled)));
return flags;
}
static inline unsigned long raw_local_irq_disable(void)
{
unsigned long flags, zero;
__asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)"
: "=r" (flags), "=&r" (zero)
: "i" (offsetof(struct paca_struct, soft_enabled))
: "memory");
return flags;
}
extern void raw_local_irq_restore(unsigned long);
extern void iseries_handle_interrupts(void);
#define raw_local_irq_enable() raw_local_irq_restore(1)
#define raw_local_save_flags(flags) ((flags) = local_get_flags())
#define raw_local_irq_save(flags) ((flags) = raw_local_irq_disable())
#define raw_irqs_disabled() (local_get_flags() == 0)
#define raw_irqs_disabled_flags(flags) ((flags) == 0)
#define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1)
#define hard_irq_disable() \
do { \
__hard_irq_disable(); \
get_paca()->soft_enabled = 0; \
get_paca()->hard_enabled = 0; \
} while(0)
static inline int irqs_disabled_flags(unsigned long flags)
{
return flags == 0;
}
#else
#if defined(CONFIG_BOOKE)
#define SET_MSR_EE(x) mtmsr(x)
#define raw_local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
#else
#define SET_MSR_EE(x) mtmsr(x)
#define raw_local_irq_restore(flags) mtmsr(flags)
#endif
static inline void raw_local_irq_disable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 0": : :"memory");
#else
unsigned long msr;
msr = mfmsr();
SET_MSR_EE(msr & ~MSR_EE);
#endif
}
static inline void raw_local_irq_enable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 1": : :"memory");
#else
unsigned long msr;
msr = mfmsr();
SET_MSR_EE(msr | MSR_EE);
#endif
}
static inline void raw_local_irq_save_ptr(unsigned long *flags)
{
unsigned long msr;
msr = mfmsr();
*flags = msr;
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 0": : :"memory");
#else
SET_MSR_EE(msr & ~MSR_EE);
#endif
}
#define raw_local_save_flags(flags) ((flags) = mfmsr())
#define raw_local_irq_save(flags) raw_local_irq_save_ptr(&flags)
#define raw_irqs_disabled() ((mfmsr() & MSR_EE) == 0)
#define raw_irqs_disabled_flags(flags) (((flags) & MSR_EE) == 0)
#define hard_irq_disable() raw_local_irq_disable()
static inline int irqs_disabled_flags(unsigned long flags)
{
return (flags & MSR_EE) == 0;
}
#endif /* CONFIG_PPC64 */
/*
* interrupt-retrigger: should we handle this via lost interrupts and IPIs
* or should we not care like we do now ? --BenH.
*/
struct irq_chip;
#ifdef CONFIG_PERF_COUNTERS
perf_counter: powerpc: Enable use of software counters on 32-bit powerpc This enables the perf_counter subsystem on 32-bit powerpc. Since we don't have any support for hardware counters on 32-bit powerpc yet, only software counters can be used. Besides selecting HAVE_PERF_COUNTERS for 32-bit powerpc as well as 64-bit, the main thing this does is add an implementation of set_perf_counter_pending(). This needs to arrange for perf_counter_do_pending() to be called when interrupts are enabled. Rather than add code to local_irq_restore as 64-bit does, the 32-bit set_perf_counter_pending() generates an interrupt by setting the decrementer to 1 so that a decrementer interrupt will become pending in 1 or 2 timebase ticks (if a decrementer interrupt isn't already pending). When interrupts are enabled, timer_interrupt() will be called, and some new code in there calls perf_counter_do_pending(). We use a per-cpu array of flags to indicate whether we need to call perf_counter_do_pending() or not. This introduces a couple of new Kconfig symbols: PPC_HAVE_PMU_SUPPORT, which is selected by processor families for which we have hardware PMU support (currently only PPC64), and PPC_PERF_CTRS, which enables the powerpc-specific perf_counter back-end. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55404.103840.393470@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 18:50:04 +07:00
#ifdef CONFIG_PPC64
static inline unsigned long test_perf_counter_pending(void)
{
unsigned long x;
asm volatile("lbz %0,%1(13)"
: "=r" (x)
: "i" (offsetof(struct paca_struct, perf_counter_pending)));
return x;
}
static inline void set_perf_counter_pending(void)
{
asm volatile("stb %0,%1(13)" : :
"r" (1),
"i" (offsetof(struct paca_struct, perf_counter_pending)));
}
static inline void clear_perf_counter_pending(void)
{
asm volatile("stb %0,%1(13)" : :
"r" (0),
"i" (offsetof(struct paca_struct, perf_counter_pending)));
}
perf_counter: powerpc: Enable use of software counters on 32-bit powerpc This enables the perf_counter subsystem on 32-bit powerpc. Since we don't have any support for hardware counters on 32-bit powerpc yet, only software counters can be used. Besides selecting HAVE_PERF_COUNTERS for 32-bit powerpc as well as 64-bit, the main thing this does is add an implementation of set_perf_counter_pending(). This needs to arrange for perf_counter_do_pending() to be called when interrupts are enabled. Rather than add code to local_irq_restore as 64-bit does, the 32-bit set_perf_counter_pending() generates an interrupt by setting the decrementer to 1 so that a decrementer interrupt will become pending in 1 or 2 timebase ticks (if a decrementer interrupt isn't already pending). When interrupts are enabled, timer_interrupt() will be called, and some new code in there calls perf_counter_do_pending(). We use a per-cpu array of flags to indicate whether we need to call perf_counter_do_pending() or not. This introduces a couple of new Kconfig symbols: PPC_HAVE_PMU_SUPPORT, which is selected by processor families for which we have hardware PMU support (currently only PPC64), and PPC_PERF_CTRS, which enables the powerpc-specific perf_counter back-end. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55404.103840.393470@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 18:50:04 +07:00
#endif /* CONFIG_PPC64 */
perf_counter: powerpc: Enable use of software counters on 32-bit powerpc This enables the perf_counter subsystem on 32-bit powerpc. Since we don't have any support for hardware counters on 32-bit powerpc yet, only software counters can be used. Besides selecting HAVE_PERF_COUNTERS for 32-bit powerpc as well as 64-bit, the main thing this does is add an implementation of set_perf_counter_pending(). This needs to arrange for perf_counter_do_pending() to be called when interrupts are enabled. Rather than add code to local_irq_restore as 64-bit does, the 32-bit set_perf_counter_pending() generates an interrupt by setting the decrementer to 1 so that a decrementer interrupt will become pending in 1 or 2 timebase ticks (if a decrementer interrupt isn't already pending). When interrupts are enabled, timer_interrupt() will be called, and some new code in there calls perf_counter_do_pending(). We use a per-cpu array of flags to indicate whether we need to call perf_counter_do_pending() or not. This introduces a couple of new Kconfig symbols: PPC_HAVE_PMU_SUPPORT, which is selected by processor families for which we have hardware PMU support (currently only PPC64), and PPC_PERF_CTRS, which enables the powerpc-specific perf_counter back-end. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55404.103840.393470@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 18:50:04 +07:00
#else /* CONFIG_PERF_COUNTERS */
static inline unsigned long test_perf_counter_pending(void)
{
return 0;
}
static inline void clear_perf_counter_pending(void) {}
#endif /* CONFIG_PERF_COUNTERS */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HW_IRQ_H */