AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
316a2868bc
linux_dsm_epyc7002/drivers/usb/dwc3/Kconfig

143 lines
4.1 KiB
Plaintext
Raw Normal View History

USB: add missing SPDX lines to Kconfig and Makefiles There are a few remaining drivers/usb/ files that do not have SPDX identifiers in them, all of these are either Kconfig or Makefiles. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17 15:23:50 +07:00
# SPDX-License-Identifier: GPL-2.0
usb: Introduce DesignWare USB3 DRD Driver The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 22:10:58 +07:00
config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
Remove GENERIC_HARDIRQ config option After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30 14:39:53 +07:00
depends on (USB || USB_GADGET) && HAS_DMA
usb: remove redundant dependency on USB_SUPPORT The whole Kconfig entries of the USB subsystem are surrounded with "if USB_SUPPORT" ... "endif", so CONFIG_USB_SUPPORT=y is surely met when these two Kconfig options are visible. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-22 15:23:18 +07:00
select USB_XHCI_PLATFORM if USB_XHCI_HCD
usb: dwc3: select USB_ROLE_SWITCH Calling into the role switch API requires that these functions are loaded, if they are in a loadable module and dwc3 itself is built-in, this produces a link error: drivers/usb/dwc3/drd.o: In function `dwc3_usb_role_switch_get': drd.c:(.text+0x26): undefined reference to `usb_role_switch_get_drvdata' drivers/usb/dwc3/drd.o: In function `dwc3_usb_role_switch_set': drd.c:(.text+0x97): undefined reference to `usb_role_switch_get_drvdata' drivers/usb/dwc3/drd.o: In function `dwc3_drd_init': drd.c:(.text+0x1ca7): undefined reference to `usb_role_switch_register' drivers/usb/dwc3/drd.o: In function `dwc3_drd_exit': drd.c:(.text+0x1e92): undefined reference to `usb_role_switch_unregister' Select the USB_ROLE_SWITCH symbol from dwc3 in that configuration. Fixes: 0339f7fbc82e ("usb: dwc3: fix up for role switch API change") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-05 21:15:09 +07:00
select USB_ROLE_SWITCH if USB_DWC3_DUAL_ROLE
usb: Introduce DesignWare USB3 DRD Driver The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 22:10:58 +07:00
help
Say Y or M here if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
If you choose to build this driver is a dynamically linked
module, the module will be called dwc3.ko.
if USB_DWC3
usb: dwc3: add ULPI interface support Registers DWC3's ULPI interface with the ULPI bus when it's available. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-13 19:26:51 +07:00
config USB_DWC3_ULPI
bool "Register ULPI PHY Interface"
usb: dwc3: Use ASCII space in Kconfig The USB_DWC3_ULPI Kconfig entry uses a UTF-8 non-breaking space (0xca20) instead of a regular ASCII space (0x20). Commit 2e0d737fc76f ("kconfig: don't silently ignore unhandled characters") exposes this by warning about unhandled characters. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12 20:16:21 +07:00
depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_DWC3
usb: dwc3: add ULPI interface support Registers DWC3's ULPI interface with the ULPI bus when it's available. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-13 19:26:51 +07:00
help
Select this if you have ULPI type PHY attached to your DWC3
controller.
usb: dwc3: remove dwc3 dependency on host AND gadget. DWC3 controller curretly depends on USB && USB_GADGET. Some hardware may like to use only host feature on dwc3, or only gadget feature. So, removing this dependency of USB_DWC3 on USB and USB_GADGET. Adding the mode of operaiton of DWC3 also here HOST/GADGET/DUAL_ROLE based on which features are enabled. [ balbi@ti.com : . make sure we have default modes for all possible Kernel configurations. . Remove the config -> menuconfig change as it's unnecessary . switch over to IS_ENABLED() ] CC: Doug Anderson <dianders@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-15 17:39:21 +07:00
choice
bool "DWC3 Mode Selection"
default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
default USB_DWC3_HOST if (USB && !USB_GADGET)
default USB_DWC3_GADGET if (!USB && USB_GADGET)
config USB_DWC3_HOST
bool "Host only mode"
usb: dwc3: Fix compilation break when building with USB_DWC3_DUAL_ROLE=y The commit: 388e5c5 usb: dwc3: remove dwc3 dependency on host AND gadget breaks compilation when USB=y, USB_GADGET=m, USB_DWC3=y and USB_DWC3_DUAL_ROLE=y. drivers/built-in.o: In function `dwc3_gadget_giveback': drivers/usb/dwc3/gadget.c:271: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_kick_transfer': drivers/usb/dwc3/gadget.c:1005: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_ep_queue': drivers/usb/dwc3/gadget.c:1073: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_gadget_reset_interrupt': drivers/usb/dwc3/gadget.c:2165: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_gadget_init': drivers/usb/dwc3/gadget.c:2647: undefined reference to `usb_add_gadget_udc' drivers/built-in.o: In function `dwc3_gadget_exit': drivers/usb/dwc3/gadget.c:2681: undefined reference to `usb_del_gadget_udc' drivers/built-in.o: In function `__dwc3_ep0_do_control_data': drivers/usb/dwc3/ep0.c:929: undefined reference to `usb_gadget_map_request' drivers/usb/dwc3/ep0.c:906: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:575: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_address': drivers/usb/dwc3/ep0.c:520: undefined reference to `usb_gadget_set_state' drivers/usb/dwc3/ep0.c:522: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:556: undefined reference to `usb_gadget_set_state' Making changes similar to patch: 71a5e61 usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module Let us limit the DWC3 mode to depend on corresponding usb-subsystem and USB_DWC3. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-14 19:02:16 +07:00
depends on USB=y || USB=USB_DWC3
usb: dwc3: remove dwc3 dependency on host AND gadget. DWC3 controller curretly depends on USB && USB_GADGET. Some hardware may like to use only host feature on dwc3, or only gadget feature. So, removing this dependency of USB_DWC3 on USB and USB_GADGET. Adding the mode of operaiton of DWC3 also here HOST/GADGET/DUAL_ROLE based on which features are enabled. [ balbi@ti.com : . make sure we have default modes for all possible Kernel configurations. . Remove the config -> menuconfig change as it's unnecessary . switch over to IS_ENABLED() ] CC: Doug Anderson <dianders@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-15 17:39:21 +07:00
help
Select this when you want to use DWC3 in host mode only,
thereby the gadget feature will be regressed.
config USB_DWC3_GADGET
bool "Gadget only mode"
usb: dwc3: Fix compilation break when building with USB_DWC3_DUAL_ROLE=y The commit: 388e5c5 usb: dwc3: remove dwc3 dependency on host AND gadget breaks compilation when USB=y, USB_GADGET=m, USB_DWC3=y and USB_DWC3_DUAL_ROLE=y. drivers/built-in.o: In function `dwc3_gadget_giveback': drivers/usb/dwc3/gadget.c:271: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_kick_transfer': drivers/usb/dwc3/gadget.c:1005: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_ep_queue': drivers/usb/dwc3/gadget.c:1073: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_gadget_reset_interrupt': drivers/usb/dwc3/gadget.c:2165: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_gadget_init': drivers/usb/dwc3/gadget.c:2647: undefined reference to `usb_add_gadget_udc' drivers/built-in.o: In function `dwc3_gadget_exit': drivers/usb/dwc3/gadget.c:2681: undefined reference to `usb_del_gadget_udc' drivers/built-in.o: In function `__dwc3_ep0_do_control_data': drivers/usb/dwc3/ep0.c:929: undefined reference to `usb_gadget_map_request' drivers/usb/dwc3/ep0.c:906: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:575: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_address': drivers/usb/dwc3/ep0.c:520: undefined reference to `usb_gadget_set_state' drivers/usb/dwc3/ep0.c:522: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:556: undefined reference to `usb_gadget_set_state' Making changes similar to patch: 71a5e61 usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module Let us limit the DWC3 mode to depend on corresponding usb-subsystem and USB_DWC3. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-14 19:02:16 +07:00
depends on USB_GADGET=y || USB_GADGET=USB_DWC3
usb: dwc3: remove dwc3 dependency on host AND gadget. DWC3 controller curretly depends on USB && USB_GADGET. Some hardware may like to use only host feature on dwc3, or only gadget feature. So, removing this dependency of USB_DWC3 on USB and USB_GADGET. Adding the mode of operaiton of DWC3 also here HOST/GADGET/DUAL_ROLE based on which features are enabled. [ balbi@ti.com : . make sure we have default modes for all possible Kernel configurations. . Remove the config -> menuconfig change as it's unnecessary . switch over to IS_ENABLED() ] CC: Doug Anderson <dianders@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-15 17:39:21 +07:00
help
Select this when you want to use DWC3 in gadget mode only,
thereby the host feature will be regressed.
config USB_DWC3_DUAL_ROLE
bool "Dual Role mode"
usb: dwc3: Fix compilation break when building with USB_DWC3_DUAL_ROLE=y The commit: 388e5c5 usb: dwc3: remove dwc3 dependency on host AND gadget breaks compilation when USB=y, USB_GADGET=m, USB_DWC3=y and USB_DWC3_DUAL_ROLE=y. drivers/built-in.o: In function `dwc3_gadget_giveback': drivers/usb/dwc3/gadget.c:271: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_kick_transfer': drivers/usb/dwc3/gadget.c:1005: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_ep_queue': drivers/usb/dwc3/gadget.c:1073: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_gadget_reset_interrupt': drivers/usb/dwc3/gadget.c:2165: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_gadget_init': drivers/usb/dwc3/gadget.c:2647: undefined reference to `usb_add_gadget_udc' drivers/built-in.o: In function `dwc3_gadget_exit': drivers/usb/dwc3/gadget.c:2681: undefined reference to `usb_del_gadget_udc' drivers/built-in.o: In function `__dwc3_ep0_do_control_data': drivers/usb/dwc3/ep0.c:929: undefined reference to `usb_gadget_map_request' drivers/usb/dwc3/ep0.c:906: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:575: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_address': drivers/usb/dwc3/ep0.c:520: undefined reference to `usb_gadget_set_state' drivers/usb/dwc3/ep0.c:522: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:556: undefined reference to `usb_gadget_set_state' Making changes similar to patch: 71a5e61 usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module Let us limit the DWC3 mode to depend on corresponding usb-subsystem and USB_DWC3. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-14 19:02:16 +07:00
depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
usb: dwc3: Add dual-role support If dr_mode is "otg" then support dual role mode of operation. Currently this mode is only supported when an extcon handle is present in the dwc3 device tree node. This is needed to get the ID status events of the port. We're using a workqueue to manage the dual-role state transitions as the extcon notifier (dwc3_drd_notifier) is called in an atomic context by extcon_sync() and this doesn't go well with usb_del_gadget_udc() causing a lockdep and softirq warning. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-05 17:39:31 +07:00
depends on (EXTCON=y || EXTCON=USB_DWC3)
usb: dwc3: remove dwc3 dependency on host AND gadget. DWC3 controller curretly depends on USB && USB_GADGET. Some hardware may like to use only host feature on dwc3, or only gadget feature. So, removing this dependency of USB_DWC3 on USB and USB_GADGET. Adding the mode of operaiton of DWC3 also here HOST/GADGET/DUAL_ROLE based on which features are enabled. [ balbi@ti.com : . make sure we have default modes for all possible Kernel configurations. . Remove the config -> menuconfig change as it's unnecessary . switch over to IS_ENABLED() ] CC: Doug Anderson <dianders@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-15 17:39:21 +07:00
help
This is the default mode of working of DWC3 controller where
both host and gadget features are enabled.
endchoice
usb: dwc3: make glue layers selectable Glue layers are starting to have separate requirements. For example, OMAP's glue layer is starting to use extcon framework which no one else needs. In order to make it clear the proper dependencies, we are now allowing glue layers to be selectable so that each glue layer can list their own dependencies without messing with the core IP driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-26 19:14:06 +07:00
comment "Platform Glue Driver Support"
config USB_DWC3_OMAP
tristate "Texas Instruments OMAP5 and similar Platforms"
usb: dwc3: Allow building USB_DWC3_QCOM without EXTCON Keep EXTCON support optional, as some platforms do not need it. Do the same for USB_DWC3_OMAP while we're at it. Fixes: 3def4031b3e3f ("usb: dwc3: add EXTCON dependency for qcom") Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-04-24 22:00:57 +07:00
depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on EXTCON || !EXTCON
usb: dwc3: dwc3-omap: Fix the crash on module removal Following crash is seen on dwc3_omap removal Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = ec098000 [00000018] *pgd=ad1f9831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: usb_f_ss_lb g_zero usb_f_acm u_serial usb_f_ecm u_ether libcomposite configfs snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_hwdep snd_soc_omap snd_pcm_dmaengine snd_soc_core snd_compress snd_pcm snd_tim] CPU: 0 PID: 1296 Comm: rmmod Tainted: G W 3.15.0-rc4-02716-g95c4e18-dirty #10 task: ed05a080 ti: ec368000 task.ti: ec368000 PC is at release_resource+0x14/0x7c LR is at release_resource+0x10/0x7c pc : [<c0044724>] lr : [<c0044720>] psr: 60000013 sp : ec369ec0 ip : 60000013 fp : 00021008 r10: 00000000 r9 : ec368000 r8 : c000e7a4 r7 : 00000081 r6 : bf0062c0 r5 : ed7cd000 r4 : ed7d85c0 r3 : 00000000 r2 : 00000000 r1 : 00000011 r0 : c086d08c Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: ac098059 DAC: 00000015 Process rmmod (pid: 1296, stack limit = 0xec368248) Stack: (0xec369ec0 to 0xec36a000) 9ec0: 00000000 00000001 ed7cd000 c034de94 ed7cd010 ed7cd000 00000000 c034e194 9ee0: 00000000 bf0062cc ed7cd010 c03490b0 ed154cc0 ed4c2570 ed2b8410 ed156810 ed156810 bf006d24 c034db9c c034db84 c034c518 9f20: bf006d24 ed156810 bf006d24 c034cd2c bf006d24 bf006d68 00000800 c034c340 9f40: 00000000 c00a9e5c 00000020 00000000 bf006d68 00000800 ec369f4c 33637764 9f60: 616d6f5f 00000070 00000001 ec368000 ed05a080 c000e670 00000001 c0084010 9f80: 00021088 00000800 00021088 00000081 80000010 0000e6f4 00021088 00000800 9fa0: 00021088 c000e5e0 00021088 00000800 000210b8 00000800 e04f6d00 e04f6d00 9fc0: 00021088 00000800 00021088 00000081 00000001 00000000 be91de08 00021008 9fe0: 4d768880 be91dbb4 b6fc5984 4d76888c 80000010 000210b8 00000000 00000000 [<c0044724>] (release_resource) from [<c034de94>] (platform_device_del+0x6c/0x9c) [<c034de94>] (platform_device_del) from [<c034e194>] (platform_device_unregister+0xc/0x18) [<c034e194>] (platform_device_unregister) from [<bf0062cc>] (dwc3_omap_remove_core+0xc/0x14 [dwc3_omap]) [<bf0062cc>] (dwc3_omap_remove_core [dwc3_omap]) from [<c03490b0>] (device_for_each_child+0x34/0x74) [<c03490b0>] (device_for_each_child) from [<bf0062b4>] (dwc3_omap_remove+0x6c/0x78 [dwc3_omap]) [<bf0062b4>] (dwc3_omap_remove [dwc3_omap]) from [<c034db9c>] (platform_drv_remove+0x18/0x1c) [<c034db9c>] (platform_drv_remove) from [<c034c518>] (__device_release_driver+0x70/0xc8) [<c034c518>] (__device_release_driver) from [<c034cd2c>] (driver_detach+0xb4/0xb8) [<c034cd2c>] (driver_detach) from [<c034c340>] (bus_remove_driver+0x4c/0x90) [<c034c340>] (bus_remove_driver) from [<c00a9e5c>] (SyS_delete_module+0x10c/0x198) [<c00a9e5c>] (SyS_delete_module) from [<c000e5e0>] (ret_fast_syscall+0x0/0x48) Code: e1a04000 e59f0068 eb14505e e5943010 (e5932018) ---[ end trace 7e2a8746ff4fc811 ]--- Segmentation fault [ balbi@ti.com : add CONFIG_OF dependency ] Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-22 11:01:37 +07:00
depends on OF
usb: dwc3: make glue layers selectable Glue layers are starting to have separate requirements. For example, OMAP's glue layer is starting to use extcon framework which no one else needs. In order to make it clear the proper dependencies, we are now allowing glue layers to be selectable so that each glue layer can list their own dependencies without messing with the core IP driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-26 19:14:06 +07:00
default USB_DWC3
help
Some platforms from Texas Instruments like OMAP5, DRA7xxx and
AM437x use this IP for USB2/3 functionality.
Say 'Y' or 'M' here if you have one such device
config USB_DWC3_EXYNOS
tristate "Samsung Exynos Platform"
usb: dwc3: Kconfig: allow all glues to build if COMPILE_TEST We shouldn't have any glue layer which doesn't compile everywhere. In order to make sure this is always the case, make sure COMPILE_TEST is properly added at dependency list of a config entry. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-30 19:01:45 +07:00
depends on (ARCH_EXYNOS || COMPILE_TEST) && OF
usb: dwc3: make glue layers selectable Glue layers are starting to have separate requirements. For example, OMAP's glue layer is starting to use extcon framework which no one else needs. In order to make it clear the proper dependencies, we are now allowing glue layers to be selectable so that each glue layer can list their own dependencies without messing with the core IP driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-26 19:14:06 +07:00
default USB_DWC3
help
Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
say 'Y' or 'M' if you have one such device.
config USB_DWC3_PCI
tristate "PCIe-based Platforms"
usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW a lot of embeded system SOC (e.g. freescale T2080) have both PCI and USB modules. But USB module is controlled by registers directly, it have no relationship with PCI module. when say N here it will not build PCI related code in USB driver. Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-25 18:20:55 +07:00
depends on USB_PCI && ACPI
usb: dwc3: make glue layers selectable Glue layers are starting to have separate requirements. For example, OMAP's glue layer is starting to use extcon framework which no one else needs. In order to make it clear the proper dependencies, we are now allowing glue layers to be selectable so that each glue layer can list their own dependencies without messing with the core IP driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-26 19:14:06 +07:00
default USB_DWC3
help
usb: dwc3: Add a glue driver for Synopsys HAPS platform This driver is to be used for Synopsys PCIe-base HAPS platform. Move the the HAPS support from dwc3-pci to this driver. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-13 04:26:43 +07:00
If you're using the DesignWare Core IP with a PCIe (but not HAPS
platform), please say 'Y' or 'M' here.
usb: dwc3: make glue layers selectable Glue layers are starting to have separate requirements. For example, OMAP's glue layer is starting to use extcon framework which no one else needs. In order to make it clear the proper dependencies, we are now allowing glue layers to be selectable so that each glue layer can list their own dependencies without messing with the core IP driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-26 19:14:06 +07:00
usb: dwc3: Add a glue driver for Synopsys HAPS platform This driver is to be used for Synopsys PCIe-base HAPS platform. Move the the HAPS support from dwc3-pci to this driver. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-13 04:26:43 +07:00
config USB_DWC3_HAPS
tristate "Synopsys PCIe-based HAPS Platforms"
depends on USB_PCI
default USB_DWC3
help
If you're using the DesignWare Core IP with a Synopsys PCIe HAPS
platform, please say 'Y' or 'M' here.
usb: dwc3: make glue layers selectable Glue layers are starting to have separate requirements. For example, OMAP's glue layer is starting to use extcon framework which no one else needs. In order to make it clear the proper dependencies, we are now allowing glue layers to be selectable so that each glue layer can list their own dependencies without messing with the core IP driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-26 19:14:06 +07:00
usb: dwc3: add Keystone specific glue layer Add Keystone platform specific glue layer to support USB3 Host mode. [ balbi@ti.com : fix order of clk_disable() and platform_device_unregister() ] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-13 00:25:29 +07:00
config USB_DWC3_KEYSTONE
usb: dwc3: keystone: Add support for ti,am654-dwc3 The AM654 SoC contains a DWC3 controller with TI specific wrapper. Add support for that. Unlike the Keystone 2 case, for AM654 We don't need to process any IRQs for basic USB operation. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-10 22:04:30 +07:00
tristate "Texas Instruments Keystone2/AM654 Platforms"
depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
usb: dwc3: add Keystone specific glue layer Add Keystone platform specific glue layer to support USB3 Host mode. [ balbi@ti.com : fix order of clk_disable() and platform_device_unregister() ] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-13 00:25:29 +07:00
default USB_DWC3
help
usb: dwc3: keystone: Add support for ti,am654-dwc3 The AM654 SoC contains a DWC3 controller with TI specific wrapper. Add support for that. Unlike the Keystone 2 case, for AM654 We don't need to process any IRQs for basic USB operation. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-10 22:04:30 +07:00
Support of USB2/3 functionality in TI Keystone2 and AM654 platforms.
usb: dwc3: add Keystone specific glue layer Add Keystone platform specific glue layer to support USB3 Host mode. [ balbi@ti.com : fix order of clk_disable() and platform_device_unregister() ] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-13 00:25:29 +07:00
Say 'Y' or 'M' here if you have one such device
usb: dwc3: Add Amlogic G12A DWC3 glue Adds support for Amlogic G12A USB Control Glue HW. The Amlogic G12A SoC Family embeds 2 USB Controllers : - a DWC3 IP configured as Host for USB2 and USB3 - a DWC2 IP configured as Peripheral USB2 Only A glue connects these both controllers to 2 USB2 PHYs, and optionnally to an USB3+PCIE Combo PHY shared with the PCIE controller. The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including routing of the OTG PHY between the DWC3 and DWC2 controllers, and setups the on-chip OTG mode selection for this PHY. This drivers supports the on-probe setup of the OTG mode, and manually via a debugfs interface. The IRQ mode change detect is yet to be added in a future patchset, mainly due to lack of hardware to validate on. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-04-23 15:51:27 +07:00
config USB_DWC3_MESON_G12A
usb: dwc3: Fix Kconfig indentation Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191121132914.29368-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-21 20:29:14 +07:00
tristate "Amlogic Meson G12A Platforms"
depends on OF && COMMON_CLK
depends on ARCH_MESON || COMPILE_TEST
default USB_DWC3
select USB_ROLE_SWITCH
usb: dwc3: select CONFIG_REGMAP_MMIO After many randconfig builds, one configuration caused a link error with dwc3-meson-g12a lacking the regmap-mmio code: drivers/usb/dwc3/dwc3-meson-g12a.o: In function `dwc3_meson_g12a_probe': dwc3-meson-g12a.c:(.text+0x9f): undefined reference to `__devm_regmap_init_mmio_clk' Add the select statement that we have for all other users of that dependency. Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue") Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-21 21:18:36 +07:00
select REGMAP_MMIO
usb: dwc3: Fix Kconfig indentation Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191121132914.29368-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-21 20:29:14 +07:00
help
Support USB2/3 functionality in Amlogic G12A platforms.
Say 'Y' or 'M' if you have one such device.
usb: dwc3: Add Amlogic G12A DWC3 glue Adds support for Amlogic G12A USB Control Glue HW. The Amlogic G12A SoC Family embeds 2 USB Controllers : - a DWC3 IP configured as Host for USB2 and USB3 - a DWC2 IP configured as Peripheral USB2 Only A glue connects these both controllers to 2 USB2 PHYs, and optionnally to an USB3+PCIE Combo PHY shared with the PCIE controller. The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including routing of the OTG PHY between the DWC3 and DWC2 controllers, and setups the on-chip OTG mode selection for this PHY. This drivers supports the on-probe setup of the OTG mode, and manually via a debugfs interface. The IRQ mode change detect is yet to be added in a future patchset, mainly due to lack of hardware to validate on. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-04-23 15:51:27 +07:00
usb: dwc3: add generic OF glue layer For simple platforms which merely enable some clocks and populate its children, we can use this generic glue layer to avoid boilerplate code duplication. For now this supports Qcom and Xilinx, but if we find a way to add generic handling of regulators and optional PHYs, we can absorb exynos as well. Tested-by: Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-19 02:15:20 +07:00
config USB_DWC3_OF_SIMPLE
usb: dwc3: Fix Kconfig indentation Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191121132914.29368-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-21 20:29:14 +07:00
tristate "Generic OF Simple Glue Layer"
depends on OF && COMMON_CLK
default USB_DWC3
help
Support USB2/3 functionality in simple SoC integrations.
Currently supports Xilinx and Qualcomm DWC USB3 IP.
Say 'Y' or 'M' if you have one such device.
usb: dwc3: add generic OF glue layer For simple platforms which merely enable some clocks and populate its children, we can use this generic glue layer to avoid boilerplate code duplication. For now this supports Qcom and Xilinx, but if we find a way to add generic handling of regulators and optional PHYs, we can absorb exynos as well. Tested-by: Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-19 02:15:20 +07:00
usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC This patch adds the ST glue logic to manage the DWC3 HC on STiH407 SoC family. It manages the powerdown signal, and configures the internal glue logic and syscfg registers. [ balbi@ti.com : actually switch over to of_platform_depopulate() ] Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05 22:36:30 +07:00
config USB_DWC3_ST
tristate "STMicroelectronics Platforms"
usb: dwc3: Kconfig: allow all glues to build if COMPILE_TEST We shouldn't have any glue layer which doesn't compile everywhere. In order to make sure this is always the case, make sure COMPILE_TEST is properly added at dependency list of a config entry. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-30 19:01:45 +07:00
depends on (ARCH_STI || COMPILE_TEST) && OF
usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC This patch adds the ST glue logic to manage the DWC3 HC on STiH407 SoC family. It manages the powerdown signal, and configures the internal glue logic and syscfg registers. [ balbi@ti.com : actually switch over to of_platform_depopulate() ] Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05 22:36:30 +07:00
default USB_DWC3
help
STMicroelectronics SoCs with one DesignWare Core USB3 IP
inside (i.e. STiH407).
Say 'Y' or 'M' if you have one such device.
usb: dwc3: Add Qualcomm DWC3 glue driver DWC3 controller on Qualcomm SOCs has a Qscratch wrapper. Some of its uses are described below resulting in need to have a separate glue driver instead of using dwc3-of-simple: - It exposes register interface to override vbus-override and lane0-pwr-present signals going to hardware. These must be updated in peripheral mode for DWC3 if vbus lines are not connected to hardware block. Otherwise RX termination in SS mode or DP pull-up is not applied by device controller. - pwr_events_irq_stat support to check if USB2 PHY is in L2 state before glue driver proceeds with suspend. - Support for wakeup interrupts lines that are asserted whenever there is any wakeup event on USB3 or USB2 bus. - Support to replace pip3 clock going to DWC3 with utmi clock for hardware configuration where SSPHY is not used with DWC3. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-10 00:39:20 +07:00
config USB_DWC3_QCOM
tristate "Qualcomm Platform"
usb: dwc3: Allow building USB_DWC3_QCOM without EXTCON Keep EXTCON support optional, as some platforms do not need it. Do the same for USB_DWC3_OMAP while we're at it. Fixes: 3def4031b3e3f ("usb: dwc3: add EXTCON dependency for qcom") Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-04-24 22:00:57 +07:00
depends on ARCH_QCOM || COMPILE_TEST
depends on EXTCON || !EXTCON
usb: dwc3: qcom: Add support for booting with ACPI In Linux, the DWC3 core exists as its own independent platform device. Thus when describing relationships in Device Tree, the current default boot configuration table option, the DWC3 core often resides as a child of the platform specific node. Both of which are given their own address space descriptions and the drivers can be mostly agnostic to each other. However, other Operating Systems have taken a more monolithic approach, which is evident in the configuration ACPI tables for the Qualcomm Snapdragon SDM850, where all DWC3 (core and platform) components are described under a single IO memory region. To ensure successful booting using the supplied ACPI tables, we need to devise a way to chop up the address regions provided and subsequently register the DWC3 core with the resultant information, which is precisely what this patch aims to achieve. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-17 19:51:03 +07:00
depends on (OF || ACPI)
usb: dwc3: Add Qualcomm DWC3 glue driver DWC3 controller on Qualcomm SOCs has a Qscratch wrapper. Some of its uses are described below resulting in need to have a separate glue driver instead of using dwc3-of-simple: - It exposes register interface to override vbus-override and lane0-pwr-present signals going to hardware. These must be updated in peripheral mode for DWC3 if vbus lines are not connected to hardware block. Otherwise RX termination in SS mode or DP pull-up is not applied by device controller. - pwr_events_irq_stat support to check if USB2 PHY is in L2 state before glue driver proceeds with suspend. - Support for wakeup interrupts lines that are asserted whenever there is any wakeup event on USB3 or USB2 bus. - Support to replace pip3 clock going to DWC3 with utmi clock for hardware configuration where SSPHY is not used with DWC3. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-10 00:39:20 +07:00
default USB_DWC3
help
Some Qualcomm SoCs use DesignWare Core IP for USB2/3
functionality.
This driver also handles Qscratch wrapper which is needed
for peripheral mode support.
Say 'Y' or 'M' if you have one such device.
usb: Introduce DesignWare USB3 DRD Driver The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 22:10:58 +07:00
endif
Reference in New Issue Copy Permalink