linux_dsm_epyc7002/drivers/gpu/drm/vc4/Kconfig

config DRM_VC4
	tristate "Broadcom VC4 Graphics"
	depends on ARCH_BCM2835 || COMPILE_TEST
	depends on DRM
	select DRM_KMS_HELPER
	select DRM_KMS_CMA_HELPER
	select DRM_GEM_CMA_HELPER
	select DRM_PANEL
	help
	  Choose this option if you have a system that has a Broadcom
	  VC4 GPU, such as the Raspberry Pi or other BCM2708/BCM2835.

	  This driver requires that "avoid_warnings=2" be present in
	  the config.txt for the firmware, to keep it from smashing
	  our display setup.
drm/vc4: Add KMS support for Raspberry Pi. This is enough for fbcon and bringing up X using xf86-video-modesetting. It doesn't support the 3D accelerator or power management yet. v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init ordering instead of using the .load hook. Structure registration more like tegra's, but still using the typical "component" code. Drop no-op hooks for atomic_begin and mode_fixup() now that they're optional. Drop sentinel in Makefile. Fix minor style nits I noticed on another reread. v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead of having a fixed video mode. Use exynos-style component driver matching instead of devicetree nodes to list the component driver instances. Rename compatibility strings to say bcm2835, and distinguish pv0/1/2. Clean up some h/vsync code, and add in interlaced mode setup. Fix up probe/bind error paths. Use bitops.h macros for vc4_regs.h v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now that other bugs have been fixed, add timeouts to cpu_relax() loops, rename hpd-gpio to hpd-gpios. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> 2015-03-03 04:01:12 +07:00			`config DRM_VC4`
			`tristate "Broadcom VC4 Graphics"`
			`depends on ARCH_BCM2835 \|\| COMPILE_TEST`
dma-mapping: always provide the dma_map_ops based implementation Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 2016-01-21 06:02:05 +07:00			`depends on DRM`
drm/vc4: Add KMS support for Raspberry Pi. This is enough for fbcon and bringing up X using xf86-video-modesetting. It doesn't support the 3D accelerator or power management yet. v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init ordering instead of using the .load hook. Structure registration more like tegra's, but still using the typical "component" code. Drop no-op hooks for atomic_begin and mode_fixup() now that they're optional. Drop sentinel in Makefile. Fix minor style nits I noticed on another reread. v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead of having a fixed video mode. Use exynos-style component driver matching instead of devicetree nodes to list the component driver instances. Rename compatibility strings to say bcm2835, and distinguish pv0/1/2. Clean up some h/vsync code, and add in interlaced mode setup. Fix up probe/bind error paths. Use bitops.h macros for vc4_regs.h v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now that other bugs have been fixed, add timeouts to cpu_relax() loops, rename hpd-gpio to hpd-gpios. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> 2015-03-03 04:01:12 +07:00			`select DRM_KMS_HELPER`
			`select DRM_KMS_CMA_HELPER`
drm/vc4: Add dependency on HAVE_DMA_ATTRS, and select DRM_GEM_CMA_HELPER Avoid the following build errors, seen with m68k:allmodconfig and other architectures which do not support HAVE_DMA_ATTRS. ERROR: "drm_gem_cma_create" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_mmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_get_sg_table" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_vm_ops" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_mmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_vunmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_import_sg_table" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_free_object" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_vmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_dumb_map_offset" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_create" [drivers/gpu/drm/drm_kms_helper.ko] undefined! ERROR: "drm_gem_cma_describe" [drivers/gpu/drm/drm_kms_helper.ko] undefined! ERROR: "drm_gem_cma_free_object" [drivers/gpu/drm/drm_kms_helper.ko] undefined! Acked-by: Eric Anholt <eric@anholt.net> Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dave Airlie <airlied@redhat.com> 2015-11-02 07:31:52 +07:00			`select DRM_GEM_CMA_HELPER`
drm/vc4: Add DPI driver The DPI interface involves taking a ton of our GPIOs to be used as outputs, and routing display signals over them in parallel. v2: Use display_info.bus_formats[] to replace our custom DT properties. v3: Rebase on V3D documentation changes. v4: Fix rebase detritus from V3D documentation changes. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Rob Herring <robh@kernel.org> 2016-02-11 02:42:32 +07:00			`select DRM_PANEL`
drm/vc4: Add KMS support for Raspberry Pi. This is enough for fbcon and bringing up X using xf86-video-modesetting. It doesn't support the 3D accelerator or power management yet. v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init ordering instead of using the .load hook. Structure registration more like tegra's, but still using the typical "component" code. Drop no-op hooks for atomic_begin and mode_fixup() now that they're optional. Drop sentinel in Makefile. Fix minor style nits I noticed on another reread. v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead of having a fixed video mode. Use exynos-style component driver matching instead of devicetree nodes to list the component driver instances. Rename compatibility strings to say bcm2835, and distinguish pv0/1/2. Clean up some h/vsync code, and add in interlaced mode setup. Fix up probe/bind error paths. Use bitops.h macros for vc4_regs.h v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now that other bugs have been fixed, add timeouts to cpu_relax() loops, rename hpd-gpio to hpd-gpios. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> 2015-03-03 04:01:12 +07:00			`help`
			`Choose this option if you have a system that has a Broadcom`
			`VC4 GPU, such as the Raspberry Pi or other BCM2708/BCM2835.`

			`This driver requires that "avoid_warnings=2" be present in`
			`the config.txt for the firmware, to keep it from smashing`
			`our display setup.`