linux_dsm_epyc7002/kernel/trace/trace_selftest.c

811 lines
17 KiB
C
Raw Normal View History

/* Include in trace.c */
#include <linux/stringify.h>
#include <linux/kthread.h>
#include <linux/delay.h>
static inline int trace_valid_entry(struct trace_entry *entry)
{
switch (entry->type) {
case TRACE_FN:
case TRACE_CTX:
case TRACE_WAKE:
case TRACE_STACK:
case TRACE_PRINT:
case TRACE_SPECIAL:
case TRACE_BRANCH:
case TRACE_GRAPH_ENT:
case TRACE_GRAPH_RET:
case TRACE_HW_BRANCHES:
return 1;
}
return 0;
}
static int trace_test_buffer_cpu(struct trace_array *tr, int cpu)
{
struct ring_buffer_event *event;
struct trace_entry *entry;
unsigned int loops = 0;
while ((event = ring_buffer_consume(tr->buffer, cpu, NULL))) {
entry = ring_buffer_event_data(event);
/*
* The ring buffer is a size of trace_buf_size, if
* we loop more than the size, there's something wrong
* with the ring buffer.
*/
if (loops++ > trace_buf_size) {
printk(KERN_CONT ".. bad ring buffer ");
goto failed;
}
if (!trace_valid_entry(entry)) {
printk(KERN_CONT ".. invalid entry %d ",
entry->type);
goto failed;
}
}
return 0;
failed:
/* disable tracing */
tracing_disabled = 1;
printk(KERN_CONT ".. corrupted trace buffer .. ");
return -1;
}
/*
* Test the trace buffer to see if all the elements
* are still sane.
*/
static int trace_test_buffer(struct trace_array *tr, unsigned long *count)
{
unsigned long flags, cnt = 0;
int cpu, ret = 0;
/* Don't allow flipping of max traces now */
local_irq_save(flags);
__raw_spin_lock(&ftrace_max_lock);
cnt = ring_buffer_entries(tr->buffer);
/*
* The trace_test_buffer_cpu runs a while loop to consume all data.
* If the calling tracer is broken, and is constantly filling
* the buffer, this will run forever, and hard lock the box.
* We disable the ring buffer while we do this test to prevent
* a hard lock up.
*/
tracing_off();
for_each_possible_cpu(cpu) {
ret = trace_test_buffer_cpu(tr, cpu);
if (ret)
break;
}
tracing_on();
__raw_spin_unlock(&ftrace_max_lock);
local_irq_restore(flags);
if (count)
*count = cnt;
return ret;
}
static inline void warn_failed_init_tracer(struct tracer *trace, int init_ret)
{
printk(KERN_WARNING "Failed to init %s tracer, init returned %d\n",
trace->name, init_ret);
}
#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
/* Test dynamic code modification and ftrace filters */
int trace_selftest_startup_dynamic_tracing(struct tracer *trace,
struct trace_array *tr,
int (*func)(void))
{
int save_ftrace_enabled = ftrace_enabled;
int save_tracer_enabled = tracer_enabled;
unsigned long count;
char *func_name;
int ret;
/* The ftrace test PASSED */
printk(KERN_CONT "PASSED\n");
pr_info("Testing dynamic ftrace: ");
/* enable tracing, and record the filter function */
ftrace_enabled = 1;
tracer_enabled = 1;
/* passed in by parameter to fool gcc from optimizing */
func();
/*
* Some archs *cough*PowerPC*cough* add characters to the
* start of the function names. We simply put a '*' to
* accommodate them.
*/
func_name = "*" __stringify(DYN_FTRACE_TEST_NAME);
/* filter only on our function */
ftrace_set_filter(func_name, strlen(func_name), 1);
/* enable tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
goto out;
}
/* Sleep for a 1/10 of a second */
msleep(100);
/* we should have nothing in the buffer */
ret = trace_test_buffer(tr, &count);
if (ret)
goto out;
if (count) {
ret = -1;
printk(KERN_CONT ".. filter did not filter .. ");
goto out;
}
/* call our function again */
func();
/* sleep again */
msleep(100);
/* stop the tracing. */
tracing_stop();
ftrace_enabled = 0;
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
trace->reset(tr);
tracing_start();
/* we should only have one item */
if (!ret && count != 1) {
printk(KERN_CONT ".. filter failed count=%ld ..", count);
ret = -1;
goto out;
}
out:
ftrace_enabled = save_ftrace_enabled;
tracer_enabled = save_tracer_enabled;
/* Enable tracing on all functions again */
ftrace_set_filter(NULL, 0, 1);
return ret;
}
#else
# define trace_selftest_startup_dynamic_tracing(trace, tr, func) ({ 0; })
#endif /* CONFIG_DYNAMIC_FTRACE */
/*
* Simple verification test of ftrace function tracer.
* Enable ftrace, sleep 1/10 second, and then read the trace
* buffer to see if all is in order.
*/
int
trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr)
{
int save_ftrace_enabled = ftrace_enabled;
int save_tracer_enabled = tracer_enabled;
unsigned long count;
int ret;
/* make sure msleep has been recorded */
msleep(1);
/* start the tracing */
ftrace_enabled = 1;
tracer_enabled = 1;
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
goto out;
}
/* Sleep for a 1/10 of a second */
msleep(100);
/* stop the tracing. */
tracing_stop();
ftrace_enabled = 0;
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
goto out;
}
ret = trace_selftest_startup_dynamic_tracing(trace, tr,
DYN_FTRACE_TEST_NAME);
out:
ftrace_enabled = save_ftrace_enabled;
tracer_enabled = save_tracer_enabled;
/* kill ftrace totally if we failed */
if (ret)
ftrace_kill();
return ret;
}
#endif /* CONFIG_FUNCTION_TRACER */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* Maximum number of functions to trace before diagnosing a hang */
#define GRAPH_MAX_FUNC_TEST 100000000
static void __ftrace_dump(bool disable_tracing);
static unsigned int graph_hang_thresh;
/* Wrap the real function entry probe to avoid possible hanging */
static int trace_graph_entry_watchdog(struct ftrace_graph_ent *trace)
{
/* This is harmlessly racy, we want to approximately detect a hang */
if (unlikely(++graph_hang_thresh > GRAPH_MAX_FUNC_TEST)) {
ftrace_graph_stop();
printk(KERN_WARNING "BUG: Function graph tracer hang!\n");
if (ftrace_dump_on_oops)
__ftrace_dump(false);
return 0;
}
return trace_graph_entry(trace);
}
/*
* Pretty much the same than for the function tracer from which the selftest
* has been borrowed.
*/
int
trace_selftest_startup_function_graph(struct tracer *trace,
struct trace_array *tr)
{
int ret;
unsigned long count;
/*
* Simulate the init() callback but we attach a watchdog callback
* to detect and recover from possible hangs
*/
tracing_reset_online_cpus(tr);
set_graph_array(tr);
ret = register_ftrace_graph(&trace_graph_return,
&trace_graph_entry_watchdog);
if (ret) {
warn_failed_init_tracer(trace, ret);
goto out;
}
tracing_start_cmdline_record();
/* Sleep for a 1/10 of a second */
msleep(100);
/* Have we just recovered from a hang? */
if (graph_hang_thresh > GRAPH_MAX_FUNC_TEST) {
tracing_selftest_disabled = true;
ret = -1;
goto out;
}
tracing_stop();
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
goto out;
}
/* Don't test dynamic tracing, the function tracer already did */
out:
/* Stop it if we failed */
if (ret)
ftrace_graph_stop();
return ret;
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#ifdef CONFIG_IRQSOFF_TRACER
int
trace_selftest_startup_irqsoff(struct tracer *trace, struct trace_array *tr)
{
unsigned long save_max = tracing_max_latency;
unsigned long count;
int ret;
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/* reset the max latency */
tracing_max_latency = 0;
/* disable interrupts for a bit */
local_irq_disable();
udelay(100);
local_irq_enable();
tracing/ftrace: stop {irqs, preempt}soff tracers when tracing is stopped Impact: fix a selftest warning In some cases, it's possible to see the following warning on irqsoff tracer selftest: [ 4.640003] Testing tracer irqsoff: <4>------------[ cut here ]------------ [ 4.653562] WARNING: at kernel/trace/trace.c:458 update_max_tr_single+0x9a/0xc4() [ 4.660000] Hardware name: System Product Name [ 4.660000] Modules linked in: [ 4.660000] Pid: 301, comm: kstop/1 Not tainted 2.6.29-rc8-tip #35837 [ 4.660000] Call Trace: [ 4.660000] [<4014b588>] warn_slowpath+0x79/0x8f [ 4.660000] [<402d6949>] ? put_dec+0x64/0x6b [ 4.660000] [<40162b56>] ? getnstimeofday+0x58/0xdd [ 4.660000] [<40162210>] ? clocksource_read+0x3/0xf [ 4.660000] [<4015eb44>] ? ktime_set+0x8/0x34 [ 4.660000] [<4014101a>] ? balance_runtime+0x8/0x56 [ 4.660000] [<405f6f11>] ? _spin_lock+0x3/0x10 [ 4.660000] [<4011f643>] ? ftrace_call+0x5/0x8 [ 4.660000] [<4015d0f1>] ? task_cputime_zero+0x3/0x27 [ 4.660000] [<40190ee7>] ? cpupri_set+0x90/0xcb [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40190f12>] ? cpupri_set+0xbb/0xcb [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018493f>] ? ring_buffer_reset_cpu+0x27/0x51 [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018cc29>] ? trace_hardirqs_off+0x1a/0x1c [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<401850f3>] ? cpumask_next+0x15/0x18 [ 4.660000] [<4018a41f>] update_max_tr_single+0x9a/0xc4 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cd13>] check_critical_timing+0xcc/0x11e [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cdf1>] stop_critical_timing+0x8c/0x9f [ 4.660000] [<4014e5c4>] ? forget_original_parent+0xac/0xd0 [ 4.660000] [<4018ce3a>] trace_hardirqs_on+0x1a/0x1c [ 4.660000] [<4014e5c4>] forget_original_parent+0xac/0xd0 [ 4.660000] [<4014e5fe>] exit_notify+0x16/0xf2 [ 4.660000] [<4014e8a5>] do_exit+0x1cb/0x225 [ 4.660000] [<4015c72b>] ? kthread+0x0/0x69 [ 4.660000] [<4011f61d>] kernel_thread_helper+0xd/0x10 [ 4.660000] ---[ end trace a7919e7f17c0a725 ]--- [ 4.660164] .. no entries found ..FAILED! During the selftest of irqsoff tracer, we do that: /* disable interrupts for a bit */ local_irq_disable(); udelay(100); local_irq_enable(); /* stop the tracing. */ tracing_stop(); /* check both trace buffers */ ret = trace_test_buffer(tr, NULL); If a callsite performs a new max delay with irqs off just after tracing_stop, update_max_tr_single() -> ring_buffer_swap_cpu() will be called with the buffers disabled by tracing_stop(), hence the warning, then ring_buffer_swap_cpu() return -EAGAIN and update_max_tr_single() complains. Fix it by also stopping the tracer before stopping the tracing globally. A similar situation can happen with preemptoff and preemptirqsoff tracers where we apply the same fix. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237325938-5240-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 04:38:58 +07:00
/*
* Stop the tracer to avoid a warning subsequent
* to buffer flipping failure because tracing_stop()
* disables the tr and max buffers, making flipping impossible
* in case of parallels max irqs off latencies.
*/
trace->stop(tr);
/* stop the tracing. */
tracing_stop();
/* check both trace buffers */
ret = trace_test_buffer(tr, NULL);
if (!ret)
ret = trace_test_buffer(&max_tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
}
tracing_max_latency = save_max;
return ret;
}
#endif /* CONFIG_IRQSOFF_TRACER */
#ifdef CONFIG_PREEMPT_TRACER
int
trace_selftest_startup_preemptoff(struct tracer *trace, struct trace_array *tr)
{
unsigned long save_max = tracing_max_latency;
unsigned long count;
int ret;
/*
* Now that the big kernel lock is no longer preemptable,
* and this is called with the BKL held, it will always
* fail. If preemption is already disabled, simply
* pass the test. When the BKL is removed, or becomes
* preemptible again, we will once again test this,
* so keep it in.
*/
if (preempt_count()) {
printk(KERN_CONT "can not test ... force ");
return 0;
}
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/* reset the max latency */
tracing_max_latency = 0;
/* disable preemption for a bit */
preempt_disable();
udelay(100);
preempt_enable();
tracing/ftrace: stop {irqs, preempt}soff tracers when tracing is stopped Impact: fix a selftest warning In some cases, it's possible to see the following warning on irqsoff tracer selftest: [ 4.640003] Testing tracer irqsoff: <4>------------[ cut here ]------------ [ 4.653562] WARNING: at kernel/trace/trace.c:458 update_max_tr_single+0x9a/0xc4() [ 4.660000] Hardware name: System Product Name [ 4.660000] Modules linked in: [ 4.660000] Pid: 301, comm: kstop/1 Not tainted 2.6.29-rc8-tip #35837 [ 4.660000] Call Trace: [ 4.660000] [<4014b588>] warn_slowpath+0x79/0x8f [ 4.660000] [<402d6949>] ? put_dec+0x64/0x6b [ 4.660000] [<40162b56>] ? getnstimeofday+0x58/0xdd [ 4.660000] [<40162210>] ? clocksource_read+0x3/0xf [ 4.660000] [<4015eb44>] ? ktime_set+0x8/0x34 [ 4.660000] [<4014101a>] ? balance_runtime+0x8/0x56 [ 4.660000] [<405f6f11>] ? _spin_lock+0x3/0x10 [ 4.660000] [<4011f643>] ? ftrace_call+0x5/0x8 [ 4.660000] [<4015d0f1>] ? task_cputime_zero+0x3/0x27 [ 4.660000] [<40190ee7>] ? cpupri_set+0x90/0xcb [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40190f12>] ? cpupri_set+0xbb/0xcb [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018493f>] ? ring_buffer_reset_cpu+0x27/0x51 [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018cc29>] ? trace_hardirqs_off+0x1a/0x1c [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<401850f3>] ? cpumask_next+0x15/0x18 [ 4.660000] [<4018a41f>] update_max_tr_single+0x9a/0xc4 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cd13>] check_critical_timing+0xcc/0x11e [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cdf1>] stop_critical_timing+0x8c/0x9f [ 4.660000] [<4014e5c4>] ? forget_original_parent+0xac/0xd0 [ 4.660000] [<4018ce3a>] trace_hardirqs_on+0x1a/0x1c [ 4.660000] [<4014e5c4>] forget_original_parent+0xac/0xd0 [ 4.660000] [<4014e5fe>] exit_notify+0x16/0xf2 [ 4.660000] [<4014e8a5>] do_exit+0x1cb/0x225 [ 4.660000] [<4015c72b>] ? kthread+0x0/0x69 [ 4.660000] [<4011f61d>] kernel_thread_helper+0xd/0x10 [ 4.660000] ---[ end trace a7919e7f17c0a725 ]--- [ 4.660164] .. no entries found ..FAILED! During the selftest of irqsoff tracer, we do that: /* disable interrupts for a bit */ local_irq_disable(); udelay(100); local_irq_enable(); /* stop the tracing. */ tracing_stop(); /* check both trace buffers */ ret = trace_test_buffer(tr, NULL); If a callsite performs a new max delay with irqs off just after tracing_stop, update_max_tr_single() -> ring_buffer_swap_cpu() will be called with the buffers disabled by tracing_stop(), hence the warning, then ring_buffer_swap_cpu() return -EAGAIN and update_max_tr_single() complains. Fix it by also stopping the tracer before stopping the tracing globally. A similar situation can happen with preemptoff and preemptirqsoff tracers where we apply the same fix. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237325938-5240-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 04:38:58 +07:00
/*
* Stop the tracer to avoid a warning subsequent
* to buffer flipping failure because tracing_stop()
* disables the tr and max buffers, making flipping impossible
* in case of parallels max preempt off latencies.
*/
trace->stop(tr);
/* stop the tracing. */
tracing_stop();
/* check both trace buffers */
ret = trace_test_buffer(tr, NULL);
if (!ret)
ret = trace_test_buffer(&max_tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
}
tracing_max_latency = save_max;
return ret;
}
#endif /* CONFIG_PREEMPT_TRACER */
#if defined(CONFIG_IRQSOFF_TRACER) && defined(CONFIG_PREEMPT_TRACER)
int
trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr)
{
unsigned long save_max = tracing_max_latency;
unsigned long count;
int ret;
/*
* Now that the big kernel lock is no longer preemptable,
* and this is called with the BKL held, it will always
* fail. If preemption is already disabled, simply
* pass the test. When the BKL is removed, or becomes
* preemptible again, we will once again test this,
* so keep it in.
*/
if (preempt_count()) {
printk(KERN_CONT "can not test ... force ");
return 0;
}
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
tracing/ftrace: fix double calls to tracing_start() Impact: fix a warning during preemptirqsoff selftests When the preemptirqsoff selftest fails, we see the following warning: [ 6.050000] Testing tracer preemptirqsoff: .. no entries found .. ------------[ cut here ]------------ [ 6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3() [ 6.060000] Modules linked in: [ 6.060000] Pid: 1, comm: swapper Tainted: G [ 6.060000] Call Trace: [ 6.060000] [<ffffffff802460ff>] warn_slowpath+0xb1/0x100 [ 6.060000] [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a3831>] tracing_start+0x67/0xd3 [ 6.060000] [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57 [ 6.060000] [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1 [ 6.060000] [<ffffffff802a4798>] register_tracer+0x12f/0x241 [ 6.060000] [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53 [ 6.060000] [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53 This is because in fail case, the preemptirqsoff tracer selftest calls twice the tracing_start() function: int trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) { if (!ret && !count) { printk(KERN_CONT ".. no entries found .."); ret = -1; tracing_start(); <----- goto out; } [...] out: trace->reset(tr); tracing_start(); <------ tracing_max_latency = save_max; return ret; } Since it is well handled in the out path, we don't need the conditional one. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 06:32:41 +07:00
goto out_no_start;
}
/* reset the max latency */
tracing_max_latency = 0;
/* disable preemption and interrupts for a bit */
preempt_disable();
local_irq_disable();
udelay(100);
preempt_enable();
/* reverse the order of preempt vs irqs */
local_irq_enable();
tracing/ftrace: stop {irqs, preempt}soff tracers when tracing is stopped Impact: fix a selftest warning In some cases, it's possible to see the following warning on irqsoff tracer selftest: [ 4.640003] Testing tracer irqsoff: <4>------------[ cut here ]------------ [ 4.653562] WARNING: at kernel/trace/trace.c:458 update_max_tr_single+0x9a/0xc4() [ 4.660000] Hardware name: System Product Name [ 4.660000] Modules linked in: [ 4.660000] Pid: 301, comm: kstop/1 Not tainted 2.6.29-rc8-tip #35837 [ 4.660000] Call Trace: [ 4.660000] [<4014b588>] warn_slowpath+0x79/0x8f [ 4.660000] [<402d6949>] ? put_dec+0x64/0x6b [ 4.660000] [<40162b56>] ? getnstimeofday+0x58/0xdd [ 4.660000] [<40162210>] ? clocksource_read+0x3/0xf [ 4.660000] [<4015eb44>] ? ktime_set+0x8/0x34 [ 4.660000] [<4014101a>] ? balance_runtime+0x8/0x56 [ 4.660000] [<405f6f11>] ? _spin_lock+0x3/0x10 [ 4.660000] [<4011f643>] ? ftrace_call+0x5/0x8 [ 4.660000] [<4015d0f1>] ? task_cputime_zero+0x3/0x27 [ 4.660000] [<40190ee7>] ? cpupri_set+0x90/0xcb [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40190f12>] ? cpupri_set+0xbb/0xcb [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018493f>] ? ring_buffer_reset_cpu+0x27/0x51 [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018cc29>] ? trace_hardirqs_off+0x1a/0x1c [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<401850f3>] ? cpumask_next+0x15/0x18 [ 4.660000] [<4018a41f>] update_max_tr_single+0x9a/0xc4 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cd13>] check_critical_timing+0xcc/0x11e [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cdf1>] stop_critical_timing+0x8c/0x9f [ 4.660000] [<4014e5c4>] ? forget_original_parent+0xac/0xd0 [ 4.660000] [<4018ce3a>] trace_hardirqs_on+0x1a/0x1c [ 4.660000] [<4014e5c4>] forget_original_parent+0xac/0xd0 [ 4.660000] [<4014e5fe>] exit_notify+0x16/0xf2 [ 4.660000] [<4014e8a5>] do_exit+0x1cb/0x225 [ 4.660000] [<4015c72b>] ? kthread+0x0/0x69 [ 4.660000] [<4011f61d>] kernel_thread_helper+0xd/0x10 [ 4.660000] ---[ end trace a7919e7f17c0a725 ]--- [ 4.660164] .. no entries found ..FAILED! During the selftest of irqsoff tracer, we do that: /* disable interrupts for a bit */ local_irq_disable(); udelay(100); local_irq_enable(); /* stop the tracing. */ tracing_stop(); /* check both trace buffers */ ret = trace_test_buffer(tr, NULL); If a callsite performs a new max delay with irqs off just after tracing_stop, update_max_tr_single() -> ring_buffer_swap_cpu() will be called with the buffers disabled by tracing_stop(), hence the warning, then ring_buffer_swap_cpu() return -EAGAIN and update_max_tr_single() complains. Fix it by also stopping the tracer before stopping the tracing globally. A similar situation can happen with preemptoff and preemptirqsoff tracers where we apply the same fix. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237325938-5240-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 04:38:58 +07:00
/*
* Stop the tracer to avoid a warning subsequent
* to buffer flipping failure because tracing_stop()
* disables the tr and max buffers, making flipping impossible
* in case of parallels max irqs/preempt off latencies.
*/
trace->stop(tr);
/* stop the tracing. */
tracing_stop();
/* check both trace buffers */
ret = trace_test_buffer(tr, NULL);
tracing/ftrace: fix double calls to tracing_start() Impact: fix a warning during preemptirqsoff selftests When the preemptirqsoff selftest fails, we see the following warning: [ 6.050000] Testing tracer preemptirqsoff: .. no entries found .. ------------[ cut here ]------------ [ 6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3() [ 6.060000] Modules linked in: [ 6.060000] Pid: 1, comm: swapper Tainted: G [ 6.060000] Call Trace: [ 6.060000] [<ffffffff802460ff>] warn_slowpath+0xb1/0x100 [ 6.060000] [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a3831>] tracing_start+0x67/0xd3 [ 6.060000] [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57 [ 6.060000] [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1 [ 6.060000] [<ffffffff802a4798>] register_tracer+0x12f/0x241 [ 6.060000] [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53 [ 6.060000] [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53 This is because in fail case, the preemptirqsoff tracer selftest calls twice the tracing_start() function: int trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) { if (!ret && !count) { printk(KERN_CONT ".. no entries found .."); ret = -1; tracing_start(); <----- goto out; } [...] out: trace->reset(tr); tracing_start(); <------ tracing_max_latency = save_max; return ret; } Since it is well handled in the out path, we don't need the conditional one. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 06:32:41 +07:00
if (ret)
goto out;
ret = trace_test_buffer(&max_tr, &count);
tracing/ftrace: fix double calls to tracing_start() Impact: fix a warning during preemptirqsoff selftests When the preemptirqsoff selftest fails, we see the following warning: [ 6.050000] Testing tracer preemptirqsoff: .. no entries found .. ------------[ cut here ]------------ [ 6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3() [ 6.060000] Modules linked in: [ 6.060000] Pid: 1, comm: swapper Tainted: G [ 6.060000] Call Trace: [ 6.060000] [<ffffffff802460ff>] warn_slowpath+0xb1/0x100 [ 6.060000] [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a3831>] tracing_start+0x67/0xd3 [ 6.060000] [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57 [ 6.060000] [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1 [ 6.060000] [<ffffffff802a4798>] register_tracer+0x12f/0x241 [ 6.060000] [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53 [ 6.060000] [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53 This is because in fail case, the preemptirqsoff tracer selftest calls twice the tracing_start() function: int trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) { if (!ret && !count) { printk(KERN_CONT ".. no entries found .."); ret = -1; tracing_start(); <----- goto out; } [...] out: trace->reset(tr); tracing_start(); <------ tracing_max_latency = save_max; return ret; } Since it is well handled in the out path, we don't need the conditional one. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 06:32:41 +07:00
if (ret)
goto out;
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
goto out;
}
/* do the test by disabling interrupts first this time */
tracing_max_latency = 0;
tracing_start();
tracing/ftrace: stop {irqs, preempt}soff tracers when tracing is stopped Impact: fix a selftest warning In some cases, it's possible to see the following warning on irqsoff tracer selftest: [ 4.640003] Testing tracer irqsoff: <4>------------[ cut here ]------------ [ 4.653562] WARNING: at kernel/trace/trace.c:458 update_max_tr_single+0x9a/0xc4() [ 4.660000] Hardware name: System Product Name [ 4.660000] Modules linked in: [ 4.660000] Pid: 301, comm: kstop/1 Not tainted 2.6.29-rc8-tip #35837 [ 4.660000] Call Trace: [ 4.660000] [<4014b588>] warn_slowpath+0x79/0x8f [ 4.660000] [<402d6949>] ? put_dec+0x64/0x6b [ 4.660000] [<40162b56>] ? getnstimeofday+0x58/0xdd [ 4.660000] [<40162210>] ? clocksource_read+0x3/0xf [ 4.660000] [<4015eb44>] ? ktime_set+0x8/0x34 [ 4.660000] [<4014101a>] ? balance_runtime+0x8/0x56 [ 4.660000] [<405f6f11>] ? _spin_lock+0x3/0x10 [ 4.660000] [<4011f643>] ? ftrace_call+0x5/0x8 [ 4.660000] [<4015d0f1>] ? task_cputime_zero+0x3/0x27 [ 4.660000] [<40190ee7>] ? cpupri_set+0x90/0xcb [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40190f12>] ? cpupri_set+0xbb/0xcb [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018493f>] ? ring_buffer_reset_cpu+0x27/0x51 [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018cc29>] ? trace_hardirqs_off+0x1a/0x1c [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<401850f3>] ? cpumask_next+0x15/0x18 [ 4.660000] [<4018a41f>] update_max_tr_single+0x9a/0xc4 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cd13>] check_critical_timing+0xcc/0x11e [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cdf1>] stop_critical_timing+0x8c/0x9f [ 4.660000] [<4014e5c4>] ? forget_original_parent+0xac/0xd0 [ 4.660000] [<4018ce3a>] trace_hardirqs_on+0x1a/0x1c [ 4.660000] [<4014e5c4>] forget_original_parent+0xac/0xd0 [ 4.660000] [<4014e5fe>] exit_notify+0x16/0xf2 [ 4.660000] [<4014e8a5>] do_exit+0x1cb/0x225 [ 4.660000] [<4015c72b>] ? kthread+0x0/0x69 [ 4.660000] [<4011f61d>] kernel_thread_helper+0xd/0x10 [ 4.660000] ---[ end trace a7919e7f17c0a725 ]--- [ 4.660164] .. no entries found ..FAILED! During the selftest of irqsoff tracer, we do that: /* disable interrupts for a bit */ local_irq_disable(); udelay(100); local_irq_enable(); /* stop the tracing. */ tracing_stop(); /* check both trace buffers */ ret = trace_test_buffer(tr, NULL); If a callsite performs a new max delay with irqs off just after tracing_stop, update_max_tr_single() -> ring_buffer_swap_cpu() will be called with the buffers disabled by tracing_stop(), hence the warning, then ring_buffer_swap_cpu() return -EAGAIN and update_max_tr_single() complains. Fix it by also stopping the tracer before stopping the tracing globally. A similar situation can happen with preemptoff and preemptirqsoff tracers where we apply the same fix. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237325938-5240-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 04:38:58 +07:00
trace->start(tr);
preempt_disable();
local_irq_disable();
udelay(100);
preempt_enable();
/* reverse the order of preempt vs irqs */
local_irq_enable();
tracing/ftrace: stop {irqs, preempt}soff tracers when tracing is stopped Impact: fix a selftest warning In some cases, it's possible to see the following warning on irqsoff tracer selftest: [ 4.640003] Testing tracer irqsoff: <4>------------[ cut here ]------------ [ 4.653562] WARNING: at kernel/trace/trace.c:458 update_max_tr_single+0x9a/0xc4() [ 4.660000] Hardware name: System Product Name [ 4.660000] Modules linked in: [ 4.660000] Pid: 301, comm: kstop/1 Not tainted 2.6.29-rc8-tip #35837 [ 4.660000] Call Trace: [ 4.660000] [<4014b588>] warn_slowpath+0x79/0x8f [ 4.660000] [<402d6949>] ? put_dec+0x64/0x6b [ 4.660000] [<40162b56>] ? getnstimeofday+0x58/0xdd [ 4.660000] [<40162210>] ? clocksource_read+0x3/0xf [ 4.660000] [<4015eb44>] ? ktime_set+0x8/0x34 [ 4.660000] [<4014101a>] ? balance_runtime+0x8/0x56 [ 4.660000] [<405f6f11>] ? _spin_lock+0x3/0x10 [ 4.660000] [<4011f643>] ? ftrace_call+0x5/0x8 [ 4.660000] [<4015d0f1>] ? task_cputime_zero+0x3/0x27 [ 4.660000] [<40190ee7>] ? cpupri_set+0x90/0xcb [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40190f12>] ? cpupri_set+0xbb/0xcb [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018493f>] ? ring_buffer_reset_cpu+0x27/0x51 [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018cc29>] ? trace_hardirqs_off+0x1a/0x1c [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<401850f3>] ? cpumask_next+0x15/0x18 [ 4.660000] [<4018a41f>] update_max_tr_single+0x9a/0xc4 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cd13>] check_critical_timing+0xcc/0x11e [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cdf1>] stop_critical_timing+0x8c/0x9f [ 4.660000] [<4014e5c4>] ? forget_original_parent+0xac/0xd0 [ 4.660000] [<4018ce3a>] trace_hardirqs_on+0x1a/0x1c [ 4.660000] [<4014e5c4>] forget_original_parent+0xac/0xd0 [ 4.660000] [<4014e5fe>] exit_notify+0x16/0xf2 [ 4.660000] [<4014e8a5>] do_exit+0x1cb/0x225 [ 4.660000] [<4015c72b>] ? kthread+0x0/0x69 [ 4.660000] [<4011f61d>] kernel_thread_helper+0xd/0x10 [ 4.660000] ---[ end trace a7919e7f17c0a725 ]--- [ 4.660164] .. no entries found ..FAILED! During the selftest of irqsoff tracer, we do that: /* disable interrupts for a bit */ local_irq_disable(); udelay(100); local_irq_enable(); /* stop the tracing. */ tracing_stop(); /* check both trace buffers */ ret = trace_test_buffer(tr, NULL); If a callsite performs a new max delay with irqs off just after tracing_stop, update_max_tr_single() -> ring_buffer_swap_cpu() will be called with the buffers disabled by tracing_stop(), hence the warning, then ring_buffer_swap_cpu() return -EAGAIN and update_max_tr_single() complains. Fix it by also stopping the tracer before stopping the tracing globally. A similar situation can happen with preemptoff and preemptirqsoff tracers where we apply the same fix. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237325938-5240-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 04:38:58 +07:00
trace->stop(tr);
/* stop the tracing. */
tracing_stop();
/* check both trace buffers */
ret = trace_test_buffer(tr, NULL);
if (ret)
goto out;
ret = trace_test_buffer(&max_tr, &count);
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
goto out;
}
tracing/ftrace: fix double calls to tracing_start() Impact: fix a warning during preemptirqsoff selftests When the preemptirqsoff selftest fails, we see the following warning: [ 6.050000] Testing tracer preemptirqsoff: .. no entries found .. ------------[ cut here ]------------ [ 6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3() [ 6.060000] Modules linked in: [ 6.060000] Pid: 1, comm: swapper Tainted: G [ 6.060000] Call Trace: [ 6.060000] [<ffffffff802460ff>] warn_slowpath+0xb1/0x100 [ 6.060000] [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a3831>] tracing_start+0x67/0xd3 [ 6.060000] [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57 [ 6.060000] [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1 [ 6.060000] [<ffffffff802a4798>] register_tracer+0x12f/0x241 [ 6.060000] [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53 [ 6.060000] [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53 This is because in fail case, the preemptirqsoff tracer selftest calls twice the tracing_start() function: int trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) { if (!ret && !count) { printk(KERN_CONT ".. no entries found .."); ret = -1; tracing_start(); <----- goto out; } [...] out: trace->reset(tr); tracing_start(); <------ tracing_max_latency = save_max; return ret; } Since it is well handled in the out path, we don't need the conditional one. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 06:32:41 +07:00
out:
tracing_start();
tracing/ftrace: fix double calls to tracing_start() Impact: fix a warning during preemptirqsoff selftests When the preemptirqsoff selftest fails, we see the following warning: [ 6.050000] Testing tracer preemptirqsoff: .. no entries found .. ------------[ cut here ]------------ [ 6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3() [ 6.060000] Modules linked in: [ 6.060000] Pid: 1, comm: swapper Tainted: G [ 6.060000] Call Trace: [ 6.060000] [<ffffffff802460ff>] warn_slowpath+0xb1/0x100 [ 6.060000] [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a3831>] tracing_start+0x67/0xd3 [ 6.060000] [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57 [ 6.060000] [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1 [ 6.060000] [<ffffffff802a4798>] register_tracer+0x12f/0x241 [ 6.060000] [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53 [ 6.060000] [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53 This is because in fail case, the preemptirqsoff tracer selftest calls twice the tracing_start() function: int trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) { if (!ret && !count) { printk(KERN_CONT ".. no entries found .."); ret = -1; tracing_start(); <----- goto out; } [...] out: trace->reset(tr); tracing_start(); <------ tracing_max_latency = save_max; return ret; } Since it is well handled in the out path, we don't need the conditional one. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 06:32:41 +07:00
out_no_start:
trace->reset(tr);
tracing_max_latency = save_max;
return ret;
}
#endif /* CONFIG_IRQSOFF_TRACER && CONFIG_PREEMPT_TRACER */
#ifdef CONFIG_NOP_TRACER
int
trace_selftest_startup_nop(struct tracer *trace, struct trace_array *tr)
{
/* What could possibly go wrong? */
return 0;
}
#endif
#ifdef CONFIG_SCHED_TRACER
static int trace_wakeup_test_thread(void *data)
{
/* Make this a RT thread, doesn't need to be too high */
struct sched_param param = { .sched_priority = 5 };
struct completion *x = data;
sched_setscheduler(current, SCHED_FIFO, &param);
/* Make it know we have a new prio */
complete(x);
/* now go to sleep and let the test wake us up */
set_current_state(TASK_INTERRUPTIBLE);
schedule();
/* we are awake, now wait to disappear */
while (!kthread_should_stop()) {
/*
* This is an RT task, do short sleeps to let
* others run.
*/
msleep(100);
}
return 0;
}
int
trace_selftest_startup_wakeup(struct tracer *trace, struct trace_array *tr)
{
unsigned long save_max = tracing_max_latency;
struct task_struct *p;
struct completion isrt;
unsigned long count;
int ret;
init_completion(&isrt);
/* create a high prio thread */
p = kthread_run(trace_wakeup_test_thread, &isrt, "ftrace-test");
if (IS_ERR(p)) {
printk(KERN_CONT "Failed to create ftrace wakeup test thread ");
return -1;
}
/* make sure the thread is running at an RT prio */
wait_for_completion(&isrt);
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/* reset the max latency */
tracing_max_latency = 0;
/* sleep to let the RT thread sleep too */
msleep(100);
/*
* Yes this is slightly racy. It is possible that for some
* strange reason that the RT thread we created, did not
* call schedule for 100ms after doing the completion,
* and we do a wakeup on a task that already is awake.
* But that is extremely unlikely, and the worst thing that
* happens in such a case, is that we disable tracing.
* Honestly, if this race does happen something is horrible
* wrong with the system.
*/
wake_up_process(p);
/* give a little time to let the thread wake up */
msleep(100);
/* stop the tracing. */
tracing_stop();
/* check both trace buffers */
ret = trace_test_buffer(tr, NULL);
if (!ret)
ret = trace_test_buffer(&max_tr, &count);
trace->reset(tr);
tracing_start();
tracing_max_latency = save_max;
/* kill the thread */
kthread_stop(p);
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
}
return ret;
}
#endif /* CONFIG_SCHED_TRACER */
#ifdef CONFIG_CONTEXT_SWITCH_TRACER
int
trace_selftest_startup_sched_switch(struct tracer *trace, struct trace_array *tr)
{
unsigned long count;
int ret;
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/* Sleep for a 1/10 of a second */
msleep(100);
/* stop the tracing. */
tracing_stop();
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
}
return ret;
}
#endif /* CONFIG_CONTEXT_SWITCH_TRACER */
#ifdef CONFIG_SYSPROF_TRACER
int
trace_selftest_startup_sysprof(struct tracer *trace, struct trace_array *tr)
{
unsigned long count;
int ret;
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/* Sleep for a 1/10 of a second */
msleep(100);
/* stop the tracing. */
tracing_stop();
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
}
return ret;
}
#endif /* CONFIG_SYSPROF_TRACER */
#ifdef CONFIG_BRANCH_TRACER
int
trace_selftest_startup_branch(struct tracer *trace, struct trace_array *tr)
{
unsigned long count;
int ret;
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/* Sleep for a 1/10 of a second */
msleep(100);
/* stop the tracing. */
tracing_stop();
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
}
return ret;
}
#endif /* CONFIG_BRANCH_TRACER */
#ifdef CONFIG_HW_BRANCH_TRACER
int
trace_selftest_startup_hw_branches(struct tracer *trace,
struct trace_array *tr)
{
struct trace_iterator *iter;
struct tracer tracer;
unsigned long count;
int ret;
if (!trace->open) {
printk(KERN_CONT "missing open function...");
return -1;
}
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/*
* The hw-branch tracer needs to collect the trace from the various
* cpu trace buffers - before tracing is stopped.
*/
iter = kzalloc(sizeof(*iter), GFP_KERNEL);
if (!iter)
return -ENOMEM;
memcpy(&tracer, trace, sizeof(tracer));
iter->trace = &tracer;
iter->tr = tr;
iter->pos = -1;
mutex_init(&iter->mutex);
trace->open(iter);
mutex_destroy(&iter->mutex);
kfree(iter);
tracing_stop();
ret = trace_test_buffer(tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT "no entries found..");
ret = -1;
}
return ret;
}
#endif /* CONFIG_HW_BRANCH_TRACER */