linux_dsm_epyc7002/net/core/netpoll.c

948 lines
21 KiB
C
Raw Normal View History

/*
* Common framework for low-level network console, dump, and debugger code
*
* Sep 8 2003 Matt Mackall <mpm@selenic.com>
*
* based on the netconsole code from:
*
* Copyright (C) 2001 Ingo Molnar <mingo@redhat.com>
* Copyright (C) 2002 Red Hat, Inc.
*/
#include <linux/moduleparam.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/string.h>
#include <linux/if_arp.h>
#include <linux/inetdevice.h>
#include <linux/inet.h>
#include <linux/interrupt.h>
#include <linux/netpoll.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/rcupdate.h>
#include <linux/workqueue.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <net/tcp.h>
#include <net/udp.h>
#include <asm/unaligned.h>
#include <trace/events/napi.h>
/*
* We maintain a small pool of fully-sized skbs, to make sure the
* message gets out even in extreme OOM situations.
*/
#define MAX_UDP_CHUNK 1460
#define MAX_SKBS 32
static struct sk_buff_head skb_pool;
static atomic_t trapped;
#define USEC_PER_POLL 50
#define NETPOLL_RX_ENABLED 1
#define NETPOLL_RX_DROP 2
#define MAX_SKB_SIZE \
(MAX_UDP_CHUNK + sizeof(struct udphdr) + \
sizeof(struct iphdr) + sizeof(struct ethhdr))
static void zap_completion_queue(void);
static void arp_reply(struct sk_buff *skb);
static unsigned int carrier_timeout = 4;
module_param(carrier_timeout, uint, 0644);
static void queue_process(struct work_struct *work)
{
struct netpoll_info *npinfo =
container_of(work, struct netpoll_info, tx_work.work);
struct sk_buff *skb;
unsigned long flags;
while ((skb = skb_dequeue(&npinfo->txq))) {
struct net_device *dev = skb->dev;
const struct net_device_ops *ops = dev->netdev_ops;
struct netdev_queue *txq;
if (!netif_device_present(dev) || !netif_running(dev)) {
__kfree_skb(skb);
continue;
}
txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
local_irq_save(flags);
__netif_tx_lock(txq, smp_processor_id());
if (netif_tx_queue_frozen_or_stopped(txq) ||
ops->ndo_start_xmit(skb, dev) != NETDEV_TX_OK) {
skb_queue_head(&npinfo->txq, skb);
__netif_tx_unlock(txq);
local_irq_restore(flags);
schedule_delayed_work(&npinfo->tx_work, HZ/10);
return;
}
__netif_tx_unlock(txq);
local_irq_restore(flags);
}
}
static __sum16 checksum_udp(struct sk_buff *skb, struct udphdr *uh,
unsigned short ulen, __be32 saddr, __be32 daddr)
{
__wsum psum;
if (uh->check == 0 || skb_csum_unnecessary(skb))
return 0;
psum = csum_tcpudp_nofold(saddr, daddr, ulen, IPPROTO_UDP, 0);
if (skb->ip_summed == CHECKSUM_COMPLETE &&
!csum_fold(csum_add(psum, skb->csum)))
return 0;
skb->csum = psum;
return __skb_checksum_complete(skb);
}
/*
* Check whether delayed processing was scheduled for our NIC. If so,
* we attempt to grab the poll lock and use ->poll() to pump the card.
* If this fails, either we've recursed in ->poll() or it's already
* running on another CPU.
*
* Note: we don't mask interrupts with this lock because we're using
* trylock here and interrupts are already disabled in the softirq
* case. Further, we test the poll_owner to avoid recursion on UP
* systems where the lock doesn't exist.
*
* In cases where there is bi-directional communications, reading only
* one message at a time can lead to packets being dropped by the
* network adapter, forcing superfluous retries and possibly timeouts.
* Thus, we set our budget to greater than 1.
*/
static int poll_one_napi(struct netpoll_info *npinfo,
struct napi_struct *napi, int budget)
{
int work;
/* net_rx_action's ->poll() invocations and our's are
* synchronized by this test which is only made while
* holding the napi->poll_lock.
*/
if (!test_bit(NAPI_STATE_SCHED, &napi->state))
return budget;
npinfo->rx_flags |= NETPOLL_RX_DROP;
atomic_inc(&trapped);
netpoll: fix race on poll_list resulting in garbage entry A few months back a race was discused between the netpoll napi service path, and the fast path through net_rx_action: http://kerneltrap.org/mailarchive/linux-netdev/2007/10/16/345470 A patch was submitted for that bug, but I think we missed a case. Consider the following scenario: INITIAL STATE CPU0 has one napi_struct A on its poll_list CPU1 is calling netpoll_send_skb and needs to call poll_napi on the same napi_struct A that CPU0 has on its list CPU0 CPU1 net_rx_action poll_napi !list_empty (returns true) locks poll_lock for A poll_one_napi napi->poll netif_rx_complete __napi_complete (removes A from poll_list) list_entry(list->next) In the above scenario, net_rx_action assumes that the per-cpu poll_list is exclusive to that cpu. netpoll of course violates that, and because the netpoll path can dequeue from the poll list, its possible for CPU0 to detect a non-empty list at the top of the while loop in net_rx_action, but have it become empty by the time it calls list_entry. Since the poll_list isn't surrounded by any other structure, the returned data from that list_entry call in this situation is garbage, and any number of crashes can result based on what exactly that garbage is. Given that its not fasible for performance reasons to place exclusive locks arround each cpus poll list to provide that mutal exclusion, I think the best solution is modify the netpoll path in such a way that we continue to guarantee that the poll_list for a cpu is in fact exclusive to that cpu. To do this I've implemented the patch below. It adds an additional bit to the state field in the napi_struct. When executing napi->poll from the netpoll_path, this bit will be set. When a driver calls netif_rx_complete, if that bit is set, it will not remove the napi_struct from the poll_list. That work will be saved for the next iteration of net_rx_action. I've tested this and it seems to work well. About the biggest drawback I can see to it is the fact that it might result in an extra loop through net_rx_action in the event that the device is actually contended for (i.e. the netpoll path actually preforms all the needed work no the device, and the call to net_rx_action winds up doing nothing, except removing the napi_struct from the poll_list. However I think this is probably a small price to pay, given that the alternative is a crash. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 14:22:26 +07:00
set_bit(NAPI_STATE_NPSVC, &napi->state);
work = napi->poll(napi, budget);
trace_napi_poll(napi);
netpoll: fix race on poll_list resulting in garbage entry A few months back a race was discused between the netpoll napi service path, and the fast path through net_rx_action: http://kerneltrap.org/mailarchive/linux-netdev/2007/10/16/345470 A patch was submitted for that bug, but I think we missed a case. Consider the following scenario: INITIAL STATE CPU0 has one napi_struct A on its poll_list CPU1 is calling netpoll_send_skb and needs to call poll_napi on the same napi_struct A that CPU0 has on its list CPU0 CPU1 net_rx_action poll_napi !list_empty (returns true) locks poll_lock for A poll_one_napi napi->poll netif_rx_complete __napi_complete (removes A from poll_list) list_entry(list->next) In the above scenario, net_rx_action assumes that the per-cpu poll_list is exclusive to that cpu. netpoll of course violates that, and because the netpoll path can dequeue from the poll list, its possible for CPU0 to detect a non-empty list at the top of the while loop in net_rx_action, but have it become empty by the time it calls list_entry. Since the poll_list isn't surrounded by any other structure, the returned data from that list_entry call in this situation is garbage, and any number of crashes can result based on what exactly that garbage is. Given that its not fasible for performance reasons to place exclusive locks arround each cpus poll list to provide that mutal exclusion, I think the best solution is modify the netpoll path in such a way that we continue to guarantee that the poll_list for a cpu is in fact exclusive to that cpu. To do this I've implemented the patch below. It adds an additional bit to the state field in the napi_struct. When executing napi->poll from the netpoll_path, this bit will be set. When a driver calls netif_rx_complete, if that bit is set, it will not remove the napi_struct from the poll_list. That work will be saved for the next iteration of net_rx_action. I've tested this and it seems to work well. About the biggest drawback I can see to it is the fact that it might result in an extra loop through net_rx_action in the event that the device is actually contended for (i.e. the netpoll path actually preforms all the needed work no the device, and the call to net_rx_action winds up doing nothing, except removing the napi_struct from the poll_list. However I think this is probably a small price to pay, given that the alternative is a crash. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 14:22:26 +07:00
clear_bit(NAPI_STATE_NPSVC, &napi->state);
atomic_dec(&trapped);
npinfo->rx_flags &= ~NETPOLL_RX_DROP;
return budget - work;
}
static void poll_napi(struct net_device *dev)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
struct napi_struct *napi;
int budget = 16;
list_for_each_entry(napi, &dev->napi_list, dev_list) {
if (napi->poll_owner != smp_processor_id() &&
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
spin_trylock(&napi->poll_lock)) {
budget = poll_one_napi(dev->npinfo, napi, budget);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
spin_unlock(&napi->poll_lock);
if (!budget)
break;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
}
}
}
static void service_arp_queue(struct netpoll_info *npi)
{
if (npi) {
struct sk_buff *skb;
while ((skb = skb_dequeue(&npi->arp_tx)))
arp_reply(skb);
}
}
static void netpoll_poll_dev(struct net_device *dev)
{
const struct net_device_ops *ops;
if (!dev || !netif_running(dev))
return;
ops = dev->netdev_ops;
if (!ops->ndo_poll_controller)
return;
/* Process pending work on NIC */
ops->ndo_poll_controller(dev);
poll_napi(dev);
if (dev->priv_flags & IFF_SLAVE) {
if (dev->npinfo) {
struct net_device *bond_dev = dev->master;
struct sk_buff *skb;
while ((skb = skb_dequeue(&dev->npinfo->arp_tx))) {
skb->dev = bond_dev;
skb_queue_tail(&bond_dev->npinfo->arp_tx, skb);
}
}
}
service_arp_queue(dev->npinfo);
zap_completion_queue();
}
static void refill_skbs(void)
{
struct sk_buff *skb;
unsigned long flags;
spin_lock_irqsave(&skb_pool.lock, flags);
while (skb_pool.qlen < MAX_SKBS) {
skb = alloc_skb(MAX_SKB_SIZE, GFP_ATOMIC);
if (!skb)
break;
__skb_queue_tail(&skb_pool, skb);
}
spin_unlock_irqrestore(&skb_pool.lock, flags);
}
static void zap_completion_queue(void)
{
unsigned long flags;
struct softnet_data *sd = &get_cpu_var(softnet_data);
if (sd->completion_queue) {
struct sk_buff *clist;
local_irq_save(flags);
clist = sd->completion_queue;
sd->completion_queue = NULL;
local_irq_restore(flags);
while (clist != NULL) {
struct sk_buff *skb = clist;
clist = clist->next;
if (skb->destructor) {
atomic_inc(&skb->users);
dev_kfree_skb_any(skb); /* put this one back */
} else {
__kfree_skb(skb);
}
}
}
put_cpu_var(softnet_data);
}
static struct sk_buff *find_skb(struct netpoll *np, int len, int reserve)
{
int count = 0;
struct sk_buff *skb;
zap_completion_queue();
refill_skbs();
repeat:
skb = alloc_skb(len, GFP_ATOMIC);
if (!skb)
skb = skb_dequeue(&skb_pool);
if (!skb) {
if (++count < 10) {
netpoll_poll_dev(np->dev);
goto repeat;
}
return NULL;
}
atomic_set(&skb->users, 1);
skb_reserve(skb, reserve);
return skb;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
static int netpoll_owner_active(struct net_device *dev)
{
struct napi_struct *napi;
list_for_each_entry(napi, &dev->napi_list, dev_list) {
if (napi->poll_owner == smp_processor_id())
return 1;
}
return 0;
}
void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb,
struct net_device *dev)
{
int status = NETDEV_TX_BUSY;
unsigned long tries;
const struct net_device_ops *ops = dev->netdev_ops;
/* It is up to the caller to keep npinfo alive. */
struct netpoll_info *npinfo = np->dev->npinfo;
if (!npinfo || !netif_running(dev) || !netif_device_present(dev)) {
__kfree_skb(skb);
return;
}
/* don't get messages out of order, and no recursion */
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
if (skb_queue_len(&npinfo->txq) == 0 && !netpoll_owner_active(dev)) {
struct netdev_queue *txq;
unsigned long flags;
txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
local_irq_save(flags);
/* try until next clock tick */
for (tries = jiffies_to_usecs(1)/USEC_PER_POLL;
tries > 0; --tries) {
if (__netif_tx_trylock(txq)) {
if (!netif_tx_queue_stopped(txq)) {
status = ops->ndo_start_xmit(skb, dev);
if (status == NETDEV_TX_OK)
txq_trans_update(txq);
}
__netif_tx_unlock(txq);
if (status == NETDEV_TX_OK)
break;
}
/* tickle device maybe there is some cleanup */
netpoll_poll_dev(np->dev);
udelay(USEC_PER_POLL);
}
WARN_ONCE(!irqs_disabled(),
"netpoll_send_skb(): %s enabled interrupts in poll (%pF)\n",
dev->name, ops->ndo_start_xmit);
local_irq_restore(flags);
}
if (status != NETDEV_TX_OK) {
skb_queue_tail(&npinfo->txq, skb);
schedule_delayed_work(&npinfo->tx_work,0);
}
}
EXPORT_SYMBOL(netpoll_send_skb_on_dev);
void netpoll_send_udp(struct netpoll *np, const char *msg, int len)
{
int total_len, eth_len, ip_len, udp_len;
struct sk_buff *skb;
struct udphdr *udph;
struct iphdr *iph;
struct ethhdr *eth;
udp_len = len + sizeof(*udph);
ip_len = eth_len = udp_len + sizeof(*iph);
total_len = eth_len + ETH_HLEN + NET_IP_ALIGN;
skb = find_skb(np, total_len, total_len - len);
if (!skb)
return;
skb_copy_to_linear_data(skb, msg, len);
skb->len += len;
skb_push(skb, sizeof(*udph));
skb_reset_transport_header(skb);
udph = udp_hdr(skb);
udph->source = htons(np->local_port);
udph->dest = htons(np->remote_port);
udph->len = htons(udp_len);
udph->check = 0;
udph->check = csum_tcpudp_magic(np->local_ip,
np->remote_ip,
udp_len, IPPROTO_UDP,
csum_partial(udph, udp_len, 0));
if (udph->check == 0)
udph->check = CSUM_MANGLED_0;
skb_push(skb, sizeof(*iph));
skb_reset_network_header(skb);
iph = ip_hdr(skb);
/* iph->version = 4; iph->ihl = 5; */
put_unaligned(0x45, (unsigned char *)iph);
iph->tos = 0;
put_unaligned(htons(ip_len), &(iph->tot_len));
iph->id = 0;
iph->frag_off = 0;
iph->ttl = 64;
iph->protocol = IPPROTO_UDP;
iph->check = 0;
put_unaligned(np->local_ip, &(iph->saddr));
put_unaligned(np->remote_ip, &(iph->daddr));
iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl);
eth = (struct ethhdr *) skb_push(skb, ETH_HLEN);
skb_reset_mac_header(skb);
skb->protocol = eth->h_proto = htons(ETH_P_IP);
memcpy(eth->h_source, np->dev->dev_addr, ETH_ALEN);
memcpy(eth->h_dest, np->remote_mac, ETH_ALEN);
skb->dev = np->dev;
netpoll_send_skb(np, skb);
}
EXPORT_SYMBOL(netpoll_send_udp);
static void arp_reply(struct sk_buff *skb)
{
struct netpoll_info *npinfo = skb->dev->npinfo;
struct arphdr *arp;
unsigned char *arp_ptr;
int size, type = ARPOP_REPLY, ptype = ETH_P_ARP;
__be32 sip, tip;
unsigned char *sha;
struct sk_buff *send_skb;
struct netpoll *np, *tmp;
unsigned long flags;
int hits = 0;
if (list_empty(&npinfo->rx_np))
return;
/* Before checking the packet, we do some early
inspection whether this is interesting at all */
spin_lock_irqsave(&npinfo->rx_lock, flags);
list_for_each_entry_safe(np, tmp, &npinfo->rx_np, rx) {
if (np->dev == skb->dev)
hits++;
}
spin_unlock_irqrestore(&npinfo->rx_lock, flags);
/* No netpoll struct is using this dev */
if (!hits)
return;
/* No arp on this interface */
if (skb->dev->flags & IFF_NOARP)
return;
if (!pskb_may_pull(skb, arp_hdr_len(skb->dev)))
return;
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
arp = arp_hdr(skb);
if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
arp->ar_pro != htons(ETH_P_IP) ||
arp->ar_op != htons(ARPOP_REQUEST))
return;
arp_ptr = (unsigned char *)(arp+1);
/* save the location of the src hw addr */
sha = arp_ptr;
arp_ptr += skb->dev->addr_len;
memcpy(&sip, arp_ptr, 4);
arp_ptr += 4;
/* If we actually cared about dst hw addr,
it would get copied here */
arp_ptr += skb->dev->addr_len;
memcpy(&tip, arp_ptr, 4);
/* Should we ignore arp? */
if (ipv4_is_loopback(tip) || ipv4_is_multicast(tip))
return;
size = arp_hdr_len(skb->dev);
spin_lock_irqsave(&npinfo->rx_lock, flags);
list_for_each_entry_safe(np, tmp, &npinfo->rx_np, rx) {
if (tip != np->local_ip)
continue;
send_skb = find_skb(np, size + LL_ALLOCATED_SPACE(np->dev),
LL_RESERVED_SPACE(np->dev));
if (!send_skb)
continue;
skb_reset_network_header(send_skb);
arp = (struct arphdr *) skb_put(send_skb, size);
send_skb->dev = skb->dev;
send_skb->protocol = htons(ETH_P_ARP);
/* Fill the device header for the ARP frame */
if (dev_hard_header(send_skb, skb->dev, ptype,
sha, np->dev->dev_addr,
send_skb->len) < 0) {
kfree_skb(send_skb);
continue;
}
/*
* Fill out the arp protocol part.
*
* we only support ethernet device type,
* which (according to RFC 1390) should
* always equal 1 (Ethernet).
*/
arp->ar_hrd = htons(np->dev->type);
arp->ar_pro = htons(ETH_P_IP);
arp->ar_hln = np->dev->addr_len;
arp->ar_pln = 4;
arp->ar_op = htons(type);
arp_ptr = (unsigned char *)(arp + 1);
memcpy(arp_ptr, np->dev->dev_addr, np->dev->addr_len);
arp_ptr += np->dev->addr_len;
memcpy(arp_ptr, &tip, 4);
arp_ptr += 4;
memcpy(arp_ptr, sha, np->dev->addr_len);
arp_ptr += np->dev->addr_len;
memcpy(arp_ptr, &sip, 4);
netpoll_send_skb(np, send_skb);
/* If there are several rx_hooks for the same address,
we're fine by sending a single reply */
break;
}
spin_unlock_irqrestore(&npinfo->rx_lock, flags);
}
int __netpoll_rx(struct sk_buff *skb)
{
int proto, len, ulen;
int hits = 0;
const struct iphdr *iph;
struct udphdr *uh;
struct netpoll_info *npinfo = skb->dev->npinfo;
struct netpoll *np, *tmp;
if (list_empty(&npinfo->rx_np))
goto out;
if (skb->dev->type != ARPHRD_ETHER)
goto out;
/* check if netpoll clients need ARP */
if (skb->protocol == htons(ETH_P_ARP) &&
atomic_read(&trapped)) {
skb_queue_tail(&npinfo->arp_tx, skb);
return 1;
}
proto = ntohs(eth_hdr(skb)->h_proto);
if (proto != ETH_P_IP)
goto out;
if (skb->pkt_type == PACKET_OTHERHOST)
goto out;
if (skb_shared(skb))
goto out;
iph = (struct iphdr *)skb->data;
if (!pskb_may_pull(skb, sizeof(struct iphdr)))
goto out;
if (iph->ihl < 5 || iph->version != 4)
goto out;
if (!pskb_may_pull(skb, iph->ihl*4))
goto out;
if (ip_fast_csum((u8 *)iph, iph->ihl) != 0)
goto out;
len = ntohs(iph->tot_len);
if (skb->len < len || len < iph->ihl*4)
goto out;
/*
* Our transport medium may have padded the buffer out.
* Now We trim to the true length of the frame.
*/
if (pskb_trim_rcsum(skb, len))
goto out;
if (iph->protocol != IPPROTO_UDP)
goto out;
len -= iph->ihl*4;
uh = (struct udphdr *)(((char *)iph) + iph->ihl*4);
ulen = ntohs(uh->len);
if (ulen != len)
goto out;
if (checksum_udp(skb, uh, ulen, iph->saddr, iph->daddr))
goto out;
list_for_each_entry_safe(np, tmp, &npinfo->rx_np, rx) {
if (np->local_ip && np->local_ip != iph->daddr)
continue;
if (np->remote_ip && np->remote_ip != iph->saddr)
continue;
if (np->local_port && np->local_port != ntohs(uh->dest))
continue;
np->rx_hook(np, ntohs(uh->source),
(char *)(uh+1),
ulen - sizeof(struct udphdr));
hits++;
}
if (!hits)
goto out;
kfree_skb(skb);
return 1;
out:
if (atomic_read(&trapped)) {
kfree_skb(skb);
return 1;
}
return 0;
}
[NET] netconsole: Support dynamic reconfiguration using configfs Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. This patch introduces support for dynamic reconfiguration (adding, removing and/or modifying parameters of netconsole targets at runtime) using a userspace interface exported via configfs. Documentation is also updated accordingly. Issues and brief design overview: (1) Kernel-initiated creation / destruction of kernel objects is not possible with configfs -- the lifetimes of the "config items" is managed exclusively from userspace. But netconsole must support boot/module params too, and these are parsed in kernel and hence netpolls must be setup from the kernel. Joel Becker suggested to separately manage the lifetimes of the two kinds of netconsole_target objects -- those created via configfs mkdir(2) from userspace and those specified from the boot/module option string. This adds complexity and some redundancy here and also means that boot/module param-created targets are not exposed through the configfs namespace (and hence cannot be updated / destroyed dynamically). However, this saves us from locking / refcounting complexities that would need to be introduced in configfs to support kernel-initiated item creation / destroy there. (2) In configfs, item creation takes place in the call chain of the mkdir(2) syscall in the driver subsystem. If we used an ioctl(2) to create / destroy objects from userspace, the special userspace program is able to fill out the structure to be passed into the ioctl and hence specify attributes such as local interface that are required at the time we set up the netpoll. For configfs, this information is not available at the time of mkdir(2). So, we keep all newly-created targets (via configfs) disabled by default. The user is expected to set various attributes appropriately (including the local network interface if required) and then write(2) "1" to the "enabled" attribute. Thus, netpoll_setup() is then called on the set parameters in the context of _this_ write(2) on the "enabled" attribute itself. This design enables the user to reconfigure existing netconsole targets at runtime to be attached to newly-come-up interfaces that may not have existed when netconsole was loaded or when the targets were actually created. All this effectively enables us to get rid of custom ioctls. (3) Ultra-paranoid configfs attribute show() and store() operations, with sanity and input range checking, using only safe string primitives, and compliant with the recommendations in Documentation/filesystems/sysfs.txt. (4) A new function netpoll_print_options() is created in the netpoll API, that just prints out the configured parameters for a netpoll structure. netpoll_parse_options() is modified to use that and it is also exported to be used from netconsole. Signed-off-by: Satyam Sharma <satyam@infradead.org> Acked-by: Keiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-11 05:35:05 +07:00
void netpoll_print_options(struct netpoll *np)
{
printk(KERN_INFO "%s: local port %d\n",
np->name, np->local_port);
printk(KERN_INFO "%s: local IP %pI4\n",
np->name, &np->local_ip);
printk(KERN_INFO "%s: interface '%s'\n",
[NET] netconsole: Support dynamic reconfiguration using configfs Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. This patch introduces support for dynamic reconfiguration (adding, removing and/or modifying parameters of netconsole targets at runtime) using a userspace interface exported via configfs. Documentation is also updated accordingly. Issues and brief design overview: (1) Kernel-initiated creation / destruction of kernel objects is not possible with configfs -- the lifetimes of the "config items" is managed exclusively from userspace. But netconsole must support boot/module params too, and these are parsed in kernel and hence netpolls must be setup from the kernel. Joel Becker suggested to separately manage the lifetimes of the two kinds of netconsole_target objects -- those created via configfs mkdir(2) from userspace and those specified from the boot/module option string. This adds complexity and some redundancy here and also means that boot/module param-created targets are not exposed through the configfs namespace (and hence cannot be updated / destroyed dynamically). However, this saves us from locking / refcounting complexities that would need to be introduced in configfs to support kernel-initiated item creation / destroy there. (2) In configfs, item creation takes place in the call chain of the mkdir(2) syscall in the driver subsystem. If we used an ioctl(2) to create / destroy objects from userspace, the special userspace program is able to fill out the structure to be passed into the ioctl and hence specify attributes such as local interface that are required at the time we set up the netpoll. For configfs, this information is not available at the time of mkdir(2). So, we keep all newly-created targets (via configfs) disabled by default. The user is expected to set various attributes appropriately (including the local network interface if required) and then write(2) "1" to the "enabled" attribute. Thus, netpoll_setup() is then called on the set parameters in the context of _this_ write(2) on the "enabled" attribute itself. This design enables the user to reconfigure existing netconsole targets at runtime to be attached to newly-come-up interfaces that may not have existed when netconsole was loaded or when the targets were actually created. All this effectively enables us to get rid of custom ioctls. (3) Ultra-paranoid configfs attribute show() and store() operations, with sanity and input range checking, using only safe string primitives, and compliant with the recommendations in Documentation/filesystems/sysfs.txt. (4) A new function netpoll_print_options() is created in the netpoll API, that just prints out the configured parameters for a netpoll structure. netpoll_parse_options() is modified to use that and it is also exported to be used from netconsole. Signed-off-by: Satyam Sharma <satyam@infradead.org> Acked-by: Keiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-11 05:35:05 +07:00
np->name, np->dev_name);
printk(KERN_INFO "%s: remote port %d\n",
np->name, np->remote_port);
printk(KERN_INFO "%s: remote IP %pI4\n",
np->name, &np->remote_ip);
printk(KERN_INFO "%s: remote ethernet address %pM\n",
np->name, np->remote_mac);
[NET] netconsole: Support dynamic reconfiguration using configfs Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. This patch introduces support for dynamic reconfiguration (adding, removing and/or modifying parameters of netconsole targets at runtime) using a userspace interface exported via configfs. Documentation is also updated accordingly. Issues and brief design overview: (1) Kernel-initiated creation / destruction of kernel objects is not possible with configfs -- the lifetimes of the "config items" is managed exclusively from userspace. But netconsole must support boot/module params too, and these are parsed in kernel and hence netpolls must be setup from the kernel. Joel Becker suggested to separately manage the lifetimes of the two kinds of netconsole_target objects -- those created via configfs mkdir(2) from userspace and those specified from the boot/module option string. This adds complexity and some redundancy here and also means that boot/module param-created targets are not exposed through the configfs namespace (and hence cannot be updated / destroyed dynamically). However, this saves us from locking / refcounting complexities that would need to be introduced in configfs to support kernel-initiated item creation / destroy there. (2) In configfs, item creation takes place in the call chain of the mkdir(2) syscall in the driver subsystem. If we used an ioctl(2) to create / destroy objects from userspace, the special userspace program is able to fill out the structure to be passed into the ioctl and hence specify attributes such as local interface that are required at the time we set up the netpoll. For configfs, this information is not available at the time of mkdir(2). So, we keep all newly-created targets (via configfs) disabled by default. The user is expected to set various attributes appropriately (including the local network interface if required) and then write(2) "1" to the "enabled" attribute. Thus, netpoll_setup() is then called on the set parameters in the context of _this_ write(2) on the "enabled" attribute itself. This design enables the user to reconfigure existing netconsole targets at runtime to be attached to newly-come-up interfaces that may not have existed when netconsole was loaded or when the targets were actually created. All this effectively enables us to get rid of custom ioctls. (3) Ultra-paranoid configfs attribute show() and store() operations, with sanity and input range checking, using only safe string primitives, and compliant with the recommendations in Documentation/filesystems/sysfs.txt. (4) A new function netpoll_print_options() is created in the netpoll API, that just prints out the configured parameters for a netpoll structure. netpoll_parse_options() is modified to use that and it is also exported to be used from netconsole. Signed-off-by: Satyam Sharma <satyam@infradead.org> Acked-by: Keiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-11 05:35:05 +07:00
}
EXPORT_SYMBOL(netpoll_print_options);
[NET] netconsole: Support dynamic reconfiguration using configfs Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. This patch introduces support for dynamic reconfiguration (adding, removing and/or modifying parameters of netconsole targets at runtime) using a userspace interface exported via configfs. Documentation is also updated accordingly. Issues and brief design overview: (1) Kernel-initiated creation / destruction of kernel objects is not possible with configfs -- the lifetimes of the "config items" is managed exclusively from userspace. But netconsole must support boot/module params too, and these are parsed in kernel and hence netpolls must be setup from the kernel. Joel Becker suggested to separately manage the lifetimes of the two kinds of netconsole_target objects -- those created via configfs mkdir(2) from userspace and those specified from the boot/module option string. This adds complexity and some redundancy here and also means that boot/module param-created targets are not exposed through the configfs namespace (and hence cannot be updated / destroyed dynamically). However, this saves us from locking / refcounting complexities that would need to be introduced in configfs to support kernel-initiated item creation / destroy there. (2) In configfs, item creation takes place in the call chain of the mkdir(2) syscall in the driver subsystem. If we used an ioctl(2) to create / destroy objects from userspace, the special userspace program is able to fill out the structure to be passed into the ioctl and hence specify attributes such as local interface that are required at the time we set up the netpoll. For configfs, this information is not available at the time of mkdir(2). So, we keep all newly-created targets (via configfs) disabled by default. The user is expected to set various attributes appropriately (including the local network interface if required) and then write(2) "1" to the "enabled" attribute. Thus, netpoll_setup() is then called on the set parameters in the context of _this_ write(2) on the "enabled" attribute itself. This design enables the user to reconfigure existing netconsole targets at runtime to be attached to newly-come-up interfaces that may not have existed when netconsole was loaded or when the targets were actually created. All this effectively enables us to get rid of custom ioctls. (3) Ultra-paranoid configfs attribute show() and store() operations, with sanity and input range checking, using only safe string primitives, and compliant with the recommendations in Documentation/filesystems/sysfs.txt. (4) A new function netpoll_print_options() is created in the netpoll API, that just prints out the configured parameters for a netpoll structure. netpoll_parse_options() is modified to use that and it is also exported to be used from netconsole. Signed-off-by: Satyam Sharma <satyam@infradead.org> Acked-by: Keiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-11 05:35:05 +07:00
int netpoll_parse_options(struct netpoll *np, char *opt)
{
char *cur=opt, *delim;
if (*cur != '@') {
if ((delim = strchr(cur, '@')) == NULL)
goto parse_failed;
*delim = 0;
np->local_port = simple_strtol(cur, NULL, 10);
cur = delim;
}
cur++;
if (*cur != '/') {
if ((delim = strchr(cur, '/')) == NULL)
goto parse_failed;
*delim = 0;
np->local_ip = in_aton(cur);
cur = delim;
}
cur++;
if (*cur != ',') {
/* parse out dev name */
if ((delim = strchr(cur, ',')) == NULL)
goto parse_failed;
*delim = 0;
strlcpy(np->dev_name, cur, sizeof(np->dev_name));
cur = delim;
}
cur++;
if (*cur != '@') {
/* dst port */
if ((delim = strchr(cur, '@')) == NULL)
goto parse_failed;
*delim = 0;
if (*cur == ' ' || *cur == '\t')
printk(KERN_INFO "%s: warning: whitespace"
"is not allowed\n", np->name);
np->remote_port = simple_strtol(cur, NULL, 10);
cur = delim;
}
cur++;
/* dst ip */
if ((delim = strchr(cur, '/')) == NULL)
goto parse_failed;
*delim = 0;
np->remote_ip = in_aton(cur);
cur = delim + 1;
if (*cur != 0) {
/* MAC address */
if (!mac_pton(cur, np->remote_mac))
goto parse_failed;
}
[NET] netconsole: Support dynamic reconfiguration using configfs Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. This patch introduces support for dynamic reconfiguration (adding, removing and/or modifying parameters of netconsole targets at runtime) using a userspace interface exported via configfs. Documentation is also updated accordingly. Issues and brief design overview: (1) Kernel-initiated creation / destruction of kernel objects is not possible with configfs -- the lifetimes of the "config items" is managed exclusively from userspace. But netconsole must support boot/module params too, and these are parsed in kernel and hence netpolls must be setup from the kernel. Joel Becker suggested to separately manage the lifetimes of the two kinds of netconsole_target objects -- those created via configfs mkdir(2) from userspace and those specified from the boot/module option string. This adds complexity and some redundancy here and also means that boot/module param-created targets are not exposed through the configfs namespace (and hence cannot be updated / destroyed dynamically). However, this saves us from locking / refcounting complexities that would need to be introduced in configfs to support kernel-initiated item creation / destroy there. (2) In configfs, item creation takes place in the call chain of the mkdir(2) syscall in the driver subsystem. If we used an ioctl(2) to create / destroy objects from userspace, the special userspace program is able to fill out the structure to be passed into the ioctl and hence specify attributes such as local interface that are required at the time we set up the netpoll. For configfs, this information is not available at the time of mkdir(2). So, we keep all newly-created targets (via configfs) disabled by default. The user is expected to set various attributes appropriately (including the local network interface if required) and then write(2) "1" to the "enabled" attribute. Thus, netpoll_setup() is then called on the set parameters in the context of _this_ write(2) on the "enabled" attribute itself. This design enables the user to reconfigure existing netconsole targets at runtime to be attached to newly-come-up interfaces that may not have existed when netconsole was loaded or when the targets were actually created. All this effectively enables us to get rid of custom ioctls. (3) Ultra-paranoid configfs attribute show() and store() operations, with sanity and input range checking, using only safe string primitives, and compliant with the recommendations in Documentation/filesystems/sysfs.txt. (4) A new function netpoll_print_options() is created in the netpoll API, that just prints out the configured parameters for a netpoll structure. netpoll_parse_options() is modified to use that and it is also exported to be used from netconsole. Signed-off-by: Satyam Sharma <satyam@infradead.org> Acked-by: Keiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-11 05:35:05 +07:00
netpoll_print_options(np);
return 0;
parse_failed:
printk(KERN_INFO "%s: couldn't parse config at '%s'!\n",
np->name, cur);
return -1;
}
EXPORT_SYMBOL(netpoll_parse_options);
int __netpoll_setup(struct netpoll *np)
{
struct net_device *ndev = np->dev;
struct netpoll_info *npinfo;
const struct net_device_ops *ops;
unsigned long flags;
int err;
if ((ndev->priv_flags & IFF_DISABLE_NETPOLL) ||
!ndev->netdev_ops->ndo_poll_controller) {
printk(KERN_ERR "%s: %s doesn't support polling, aborting.\n",
np->name, np->dev_name);
err = -ENOTSUPP;
goto out;
}
if (!ndev->npinfo) {
npinfo = kmalloc(sizeof(*npinfo), GFP_KERNEL);
if (!npinfo) {
err = -ENOMEM;
goto out;
}
npinfo->rx_flags = 0;
INIT_LIST_HEAD(&npinfo->rx_np);
spin_lock_init(&npinfo->rx_lock);
skb_queue_head_init(&npinfo->arp_tx);
skb_queue_head_init(&npinfo->txq);
INIT_DELAYED_WORK(&npinfo->tx_work, queue_process);
atomic_set(&npinfo->refcnt, 1);
ops = np->dev->netdev_ops;
if (ops->ndo_netpoll_setup) {
err = ops->ndo_netpoll_setup(ndev, npinfo);
if (err)
goto free_npinfo;
}
} else {
npinfo = ndev->npinfo;
atomic_inc(&npinfo->refcnt);
}
npinfo->netpoll = np;
if (np->rx_hook) {
spin_lock_irqsave(&npinfo->rx_lock, flags);
npinfo->rx_flags |= NETPOLL_RX_ENABLED;
list_add_tail(&np->rx, &npinfo->rx_np);
spin_unlock_irqrestore(&npinfo->rx_lock, flags);
}
/* last thing to do is link it to the net device structure */
RCU_INIT_POINTER(ndev->npinfo, npinfo);
return 0;
free_npinfo:
kfree(npinfo);
out:
return err;
}
EXPORT_SYMBOL_GPL(__netpoll_setup);
int netpoll_setup(struct netpoll *np)
{
struct net_device *ndev = NULL;
struct in_device *in_dev;
int err;
if (np->dev_name)
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-18 01:56:21 +07:00
ndev = dev_get_by_name(&init_net, np->dev_name);
if (!ndev) {
printk(KERN_ERR "%s: %s doesn't exist, aborting.\n",
np->name, np->dev_name);
return -ENODEV;
}
if (ndev->master) {
printk(KERN_ERR "%s: %s is a slave device, aborting.\n",
np->name, np->dev_name);
err = -EBUSY;
goto put;
}
if (!netif_running(ndev)) {
unsigned long atmost, atleast;
printk(KERN_INFO "%s: device %s not up yet, forcing it\n",
np->name, np->dev_name);
rtnl_lock();
err = dev_open(ndev);
rtnl_unlock();
if (err) {
printk(KERN_ERR "%s: failed to open %s\n",
np->name, ndev->name);
goto put;
}
atleast = jiffies + HZ/10;
atmost = jiffies + carrier_timeout * HZ;
while (!netif_carrier_ok(ndev)) {
if (time_after(jiffies, atmost)) {
printk(KERN_NOTICE
"%s: timeout waiting for carrier\n",
np->name);
break;
}
msleep(1);
}
/* If carrier appears to come up instantly, we don't
* trust it and pause so that we don't pump all our
* queued console messages into the bitbucket.
*/
if (time_before(jiffies, atleast)) {
printk(KERN_NOTICE "%s: carrier detect appears"
" untrustworthy, waiting 4 seconds\n",
np->name);
msleep(4000);
}
}
if (!np->local_ip) {
rcu_read_lock();
in_dev = __in_dev_get_rcu(ndev);
if (!in_dev || !in_dev->ifa_list) {
rcu_read_unlock();
printk(KERN_ERR "%s: no IP address for %s, aborting\n",
np->name, np->dev_name);
err = -EDESTADDRREQ;
goto put;
}
np->local_ip = in_dev->ifa_list->ifa_local;
rcu_read_unlock();
printk(KERN_INFO "%s: local IP %pI4\n", np->name, &np->local_ip);
}
np->dev = ndev;
/* fill up the skb queue */
refill_skbs();
rtnl_lock();
err = __netpoll_setup(np);
rtnl_unlock();
if (err)
goto put;
return 0;
put:
dev_put(ndev);
return err;
}
EXPORT_SYMBOL(netpoll_setup);
static int __init netpoll_init(void)
{
skb_queue_head_init(&skb_pool);
return 0;
}
core_initcall(netpoll_init);
void __netpoll_cleanup(struct netpoll *np)
{
struct netpoll_info *npinfo;
unsigned long flags;
npinfo = np->dev->npinfo;
if (!npinfo)
return;
if (!list_empty(&npinfo->rx_np)) {
spin_lock_irqsave(&npinfo->rx_lock, flags);
list_del(&np->rx);
if (list_empty(&npinfo->rx_np))
npinfo->rx_flags &= ~NETPOLL_RX_ENABLED;
spin_unlock_irqrestore(&npinfo->rx_lock, flags);
}
if (atomic_dec_and_test(&npinfo->refcnt)) {
const struct net_device_ops *ops;
ops = np->dev->netdev_ops;
if (ops->ndo_netpoll_cleanup)
ops->ndo_netpoll_cleanup(np->dev);
RCU_INIT_POINTER(np->dev->npinfo, NULL);
/* avoid racing with NAPI reading npinfo */
synchronize_rcu_bh();
skb_queue_purge(&npinfo->arp_tx);
skb_queue_purge(&npinfo->txq);
cancel_delayed_work_sync(&npinfo->tx_work);
/* clean after last, unfinished work */
__skb_queue_purge(&npinfo->txq);
kfree(npinfo);
}
}
EXPORT_SYMBOL_GPL(__netpoll_cleanup);
void netpoll_cleanup(struct netpoll *np)
{
if (!np->dev)
return;
rtnl_lock();
__netpoll_cleanup(np);
rtnl_unlock();
dev_put(np->dev);
np->dev = NULL;
}
EXPORT_SYMBOL(netpoll_cleanup);
int netpoll_trap(void)
{
return atomic_read(&trapped);
}
EXPORT_SYMBOL(netpoll_trap);
void netpoll_set_trap(int trap)
{
if (trap)
atomic_inc(&trapped);
else
atomic_dec(&trapped);
}
EXPORT_SYMBOL(netpoll_set_trap);