mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 00:06:28 +07:00
85 lines
2.2 KiB
C
85 lines
2.2 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* SDHCI driver for Synopsys DWC_MSHC controller
|
||
|
*
|
||
|
* Copyright (C) 2018 Synopsys, Inc. (www.synopsys.com)
|
||
|
*
|
||
|
* Authors:
|
||
|
* Prabu Thangamuthu <prabu.t@synopsys.com>
|
||
|
* Manjunath M B <manjumb@synopsys.com>
|
||
|
*/
|
||
|
|
||
|
#include "sdhci.h"
|
||
|
#include "sdhci-pci.h"
|
||
|
|
||
|
#define SDHCI_VENDOR_PTR_R 0xE8
|
||
|
|
||
|
/* Synopsys vendor specific registers */
|
||
|
#define SDHC_GPIO_OUT 0x34
|
||
|
#define SDHC_AT_CTRL_R 0x40
|
||
|
#define SDHC_SW_TUNE_EN 0x00000010
|
||
|
|
||
|
/* MMCM DRP */
|
||
|
#define SDHC_MMCM_DIV_REG 0x1020
|
||
|
#define DIV_REG_100_MHZ 0x1145
|
||
|
#define DIV_REG_200_MHZ 0x1083
|
||
|
#define SDHC_MMCM_CLKFBOUT 0x1024
|
||
|
#define CLKFBOUT_100_MHZ 0x0000
|
||
|
#define CLKFBOUT_200_MHZ 0x0080
|
||
|
#define SDHC_CCLK_MMCM_RST 0x00000001
|
||
|
|
||
|
static void sdhci_snps_set_clock(struct sdhci_host *host, unsigned int clock)
|
||
|
{
|
||
|
u16 clk;
|
||
|
u32 reg, vendor_ptr;
|
||
|
|
||
|
vendor_ptr = sdhci_readw(host, SDHCI_VENDOR_PTR_R);
|
||
|
|
||
|
/* Disable software managed rx tuning */
|
||
|
reg = sdhci_readl(host, (SDHC_AT_CTRL_R + vendor_ptr));
|
||
|
reg &= ~SDHC_SW_TUNE_EN;
|
||
|
sdhci_writel(host, reg, (SDHC_AT_CTRL_R + vendor_ptr));
|
||
|
|
||
|
if (clock <= 52000000) {
|
||
|
sdhci_set_clock(host, clock);
|
||
|
} else {
|
||
|
/* Assert reset to MMCM */
|
||
|
reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr));
|
||
|
reg |= SDHC_CCLK_MMCM_RST;
|
||
|
sdhci_writel(host, reg, (SDHC_GPIO_OUT + vendor_ptr));
|
||
|
|
||
|
/* Configure MMCM */
|
||
|
if (clock == 100000000) {
|
||
|
sdhci_writel(host, DIV_REG_100_MHZ, SDHC_MMCM_DIV_REG);
|
||
|
sdhci_writel(host, CLKFBOUT_100_MHZ,
|
||
|
SDHC_MMCM_CLKFBOUT);
|
||
|
} else {
|
||
|
sdhci_writel(host, DIV_REG_200_MHZ, SDHC_MMCM_DIV_REG);
|
||
|
sdhci_writel(host, CLKFBOUT_200_MHZ,
|
||
|
SDHC_MMCM_CLKFBOUT);
|
||
|
}
|
||
|
|
||
|
/* De-assert reset to MMCM */
|
||
|
reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr));
|
||
|
reg &= ~SDHC_CCLK_MMCM_RST;
|
||
|
sdhci_writel(host, reg, (SDHC_GPIO_OUT + vendor_ptr));
|
||
|
|
||
|
/* Enable clock */
|
||
|
clk = SDHCI_PROG_CLOCK_MODE | SDHCI_CLOCK_INT_EN |
|
||
|
SDHCI_CLOCK_CARD_EN;
|
||
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static const struct sdhci_ops sdhci_snps_ops = {
|
||
|
.set_clock = sdhci_snps_set_clock,
|
||
|
.enable_dma = sdhci_pci_enable_dma,
|
||
|
.set_bus_width = sdhci_set_bus_width,
|
||
|
.reset = sdhci_reset,
|
||
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
||
|
};
|
||
|
|
||
|
const struct sdhci_pci_fixes sdhci_snps = {
|
||
|
.ops = &sdhci_snps_ops,
|
||
|
};
|