linux_dsm_epyc7002/drivers/phy/hisilicon/phy-histb-combphy.c

287 lines
6.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
phy: add combo phy driver for HiSilicon STB SoCs Add combo phy driver for HiSilicon STB SoCs. This phy can be used as pcie-phy, sata-phy or usb-phy. Changes for v5: - Add bindings doc for Hi3798CV200 peripheral controller, and refer to the bindings of this parent node in combphy bindings doc. Changes for v4: - Instead of relying on device id, add a new property hisilicon,fixed-mode for combphy device that doesn't support mode select but a fixed phy mode. - Move combphy mode select register bits definition to device tree, as it may vary from one device to another. Changes for v3: - Make combphy device be child of peripheral controller and use 'reg' property for mapping combphy configuration registers. - Kill "hisilicon,peripheral-syscon" property, since parent node is just the syscon controller now. - Check combphy id to handle the quirk that combphy0 can not configure mode but always works in USB3 mode. - Unify phy .init and .exit hooks for different combphy instances and work modes, as the only quirk we need to handle is that combphy0 can only work in USB3 mode. - Better naming for clock and reset, 'ref' to 'ref_clk', 'por' to 'por_rst'. Changes for v2: - Move DT bindings into a separate patch. - Drop the spurious newline from drivers/phy/Makefile. - Use the phy type defines in dt-bindings/phy/phy.h. - Use PTR_ERR_OR_ZERO() for checking return from devm_of_phy_provider_register(). - Add USB3 phy support. Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-01-24 12:47:37 +07:00
/*
* COMBPHY driver for HiSilicon STB SoCs
*
* Copyright (C) 2016-2017 HiSilicon Co., Ltd. http://www.hisilicon.com
*
* Authors: Jianguo Sun <sunjianguo1@huawei.com>
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <dt-bindings/phy/phy.h>
#define COMBPHY_MODE_PCIE 0
#define COMBPHY_MODE_USB3 1
#define COMBPHY_MODE_SATA 2
#define COMBPHY_CFG_REG 0x0
#define COMBPHY_BYPASS_CODEC BIT(31)
#define COMBPHY_TEST_WRITE BIT(24)
#define COMBPHY_TEST_DATA_SHIFT 20
#define COMBPHY_TEST_DATA_MASK GENMASK(23, 20)
#define COMBPHY_TEST_ADDR_SHIFT 12
#define COMBPHY_TEST_ADDR_MASK GENMASK(16, 12)
#define COMBPHY_CLKREF_OUT_OEN BIT(0)
struct histb_combphy_mode {
int fixed;
int select;
u32 reg;
u32 shift;
u32 mask;
};
struct histb_combphy_priv {
void __iomem *mmio;
struct regmap *syscon;
struct reset_control *por_rst;
struct clk *ref_clk;
struct phy *phy;
struct histb_combphy_mode mode;
};
static void nano_register_write(struct histb_combphy_priv *priv,
u32 addr, u32 data)
{
void __iomem *reg = priv->mmio + COMBPHY_CFG_REG;
u32 val;
/* Set up address and data for the write */
val = readl(reg);
val &= ~COMBPHY_TEST_ADDR_MASK;
val |= addr << COMBPHY_TEST_ADDR_SHIFT;
val &= ~COMBPHY_TEST_DATA_MASK;
val |= data << COMBPHY_TEST_DATA_SHIFT;
writel(val, reg);
/* Flip strobe control to trigger the write */
val &= ~COMBPHY_TEST_WRITE;
writel(val, reg);
val |= COMBPHY_TEST_WRITE;
writel(val, reg);
}
static int is_mode_fixed(struct histb_combphy_mode *mode)
{
return (mode->fixed != PHY_NONE) ? true : false;
}
static int histb_combphy_set_mode(struct histb_combphy_priv *priv)
{
struct histb_combphy_mode *mode = &priv->mode;
struct regmap *syscon = priv->syscon;
u32 hw_sel;
if (is_mode_fixed(mode))
return 0;
switch (mode->select) {
case PHY_TYPE_SATA:
hw_sel = COMBPHY_MODE_SATA;
break;
case PHY_TYPE_PCIE:
hw_sel = COMBPHY_MODE_PCIE;
break;
case PHY_TYPE_USB3:
hw_sel = COMBPHY_MODE_USB3;
break;
default:
return -EINVAL;
}
return regmap_update_bits(syscon, mode->reg, mode->mask,
hw_sel << mode->shift);
}
static int histb_combphy_init(struct phy *phy)
{
struct histb_combphy_priv *priv = phy_get_drvdata(phy);
u32 val;
int ret;
ret = histb_combphy_set_mode(priv);
if (ret)
return ret;
/* Clear bypass bit to enable encoding/decoding */
val = readl(priv->mmio + COMBPHY_CFG_REG);
val &= ~COMBPHY_BYPASS_CODEC;
writel(val, priv->mmio + COMBPHY_CFG_REG);
ret = clk_prepare_enable(priv->ref_clk);
if (ret)
return ret;
reset_control_deassert(priv->por_rst);
/* Enable EP clock */
val = readl(priv->mmio + COMBPHY_CFG_REG);
val |= COMBPHY_CLKREF_OUT_OEN;
writel(val, priv->mmio + COMBPHY_CFG_REG);
/* Need to wait for EP clock stable */
mdelay(5);
/* Configure nano phy registers as suggested by vendor */
nano_register_write(priv, 0x1, 0x8);
nano_register_write(priv, 0xc, 0x9);
nano_register_write(priv, 0x1a, 0x4);
return 0;
}
static int histb_combphy_exit(struct phy *phy)
{
struct histb_combphy_priv *priv = phy_get_drvdata(phy);
u32 val;
/* Disable EP clock */
val = readl(priv->mmio + COMBPHY_CFG_REG);
val &= ~COMBPHY_CLKREF_OUT_OEN;
writel(val, priv->mmio + COMBPHY_CFG_REG);
reset_control_assert(priv->por_rst);
clk_disable_unprepare(priv->ref_clk);
return 0;
}
static const struct phy_ops histb_combphy_ops = {
.init = histb_combphy_init,
.exit = histb_combphy_exit,
.owner = THIS_MODULE,
};
static struct phy *histb_combphy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct histb_combphy_priv *priv = dev_get_drvdata(dev);
struct histb_combphy_mode *mode = &priv->mode;
if (args->args_count < 1) {
dev_err(dev, "invalid number of arguments\n");
return ERR_PTR(-EINVAL);
}
mode->select = args->args[0];
if (mode->select < PHY_TYPE_SATA || mode->select > PHY_TYPE_USB3) {
dev_err(dev, "invalid phy mode select argument\n");
return ERR_PTR(-EINVAL);
}
if (is_mode_fixed(mode) && mode->select != mode->fixed) {
dev_err(dev, "mode select %d mismatch fixed phy mode %d\n",
mode->select, mode->fixed);
return ERR_PTR(-EINVAL);
}
return priv->phy;
}
static int histb_combphy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct device *dev = &pdev->dev;
struct histb_combphy_priv *priv;
struct device_node *np = dev->of_node;
struct histb_combphy_mode *mode;
struct resource *res;
u32 vals[3];
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->mmio = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->mmio)) {
ret = PTR_ERR(priv->mmio);
return ret;
}
priv->syscon = syscon_node_to_regmap(np->parent);
if (IS_ERR(priv->syscon)) {
dev_err(dev, "failed to find peri_ctrl syscon regmap\n");
return PTR_ERR(priv->syscon);
}
mode = &priv->mode;
mode->fixed = PHY_NONE;
ret = of_property_read_u32(np, "hisilicon,fixed-mode", &mode->fixed);
if (ret == 0)
dev_dbg(dev, "found fixed phy mode %d\n", mode->fixed);
ret = of_property_read_u32_array(np, "hisilicon,mode-select-bits",
vals, ARRAY_SIZE(vals));
if (ret == 0) {
if (is_mode_fixed(mode)) {
dev_err(dev, "found select bits for fixed mode phy\n");
return -EINVAL;
}
mode->reg = vals[0];
mode->shift = vals[1];
mode->mask = vals[2];
dev_dbg(dev, "found mode select bits\n");
} else {
if (!is_mode_fixed(mode)) {
dev_err(dev, "no valid select bits found for non-fixed phy\n");
return -ENODEV;
}
}
priv->ref_clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->ref_clk)) {
dev_err(dev, "failed to find ref clock\n");
return PTR_ERR(priv->ref_clk);
}
priv->por_rst = devm_reset_control_get(dev, NULL);
if (IS_ERR(priv->por_rst)) {
dev_err(dev, "failed to get poweron reset\n");
return PTR_ERR(priv->por_rst);
}
priv->phy = devm_phy_create(dev, NULL, &histb_combphy_ops);
if (IS_ERR(priv->phy)) {
dev_err(dev, "failed to create combphy\n");
return PTR_ERR(priv->phy);
}
dev_set_drvdata(dev, priv);
phy_set_drvdata(priv->phy, priv);
phy_provider = devm_of_phy_provider_register(dev, histb_combphy_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id histb_combphy_of_match[] = {
{ .compatible = "hisilicon,hi3798cv200-combphy" },
{ },
};
MODULE_DEVICE_TABLE(of, histb_combphy_of_match);
static struct platform_driver histb_combphy_driver = {
.probe = histb_combphy_probe,
.driver = {
.name = "combphy",
.of_match_table = histb_combphy_of_match,
},
};
module_platform_driver(histb_combphy_driver);
MODULE_DESCRIPTION("HiSilicon STB COMBPHY driver");
MODULE_LICENSE("GPL v2");