linux_dsm_epyc7002/tools/perf/Makefile.config

878 lines
25 KiB
Makefile
Raw Normal View History

ifeq ($(src-perf),)
src-perf := $(srctree)/tools/perf
endif
ifeq ($(obj-perf),)
obj-perf := $(OUTPUT)
endif
ifneq ($(obj-perf),)
obj-perf := $(abspath $(obj-perf))/
endif
$(shell printf "" > $(OUTPUT).config-detected)
detected = $(shell echo "$(1)=y" >> $(OUTPUT).config-detected)
detected_var = $(shell echo "$(1)=$($(1))" >> $(OUTPUT).config-detected)
CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS)
include $(srctree)/tools/scripts/Makefile.arch
$(call detected_var,ARCH)
NO_PERF_REGS := 1
tools/perf: Map the ID values with register names Map ID values with corresponding register names. These names are then displayed when user issues perf record with the -I option followed by perf report/script with -D option. To test this patchset, Eg: $ perf record -I ls # record machine state at interrupt $ perf script -D # read the perf.data file Sample output obtained for this patch / output looks like as follows: 496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522: 0xc0000000001e538c period: 1 addr: 0 ... intr regs: mask 0x7ffffffffff ABI 64-bit .... r0 0xc0000000001e5e34 .... r1 0xc000000fe733f9a0 .... r2 0xc000000001523100 .... r3 0xc000000ffaadeb60 .... r4 0xc000000003456800 .... r5 0x73a9b5e000 .... r6 0x1e000000 .... r7 0x0 .... r8 0x0 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0x24022822 .... r13 0xc00000000feec180 .... r14 0x0 .... r15 0xc000001e4be18800 .... r16 0x0 .... r17 0xc000000ffaac5000 .... r18 0xc000000fe733f8a0 .... r19 0xc000000001523100 .... r20 0xc00000000009fd1c .... r21 0xc000000fcaa69000 .... r22 0xc0000000001e4968 .... r23 0xc000000001523100 .... r24 0xc000000fe733f850 .... r25 0xc000000fcaa69000 .... r26 0xc000000003b8fcf0 .... r27 0xfffffffffffffead .... r28 0x0 .... r29 0xc000000fcaa69000 .... r30 0x1 .... r31 0x0 .... nip 0xc0000000001dd320 .... msr 0x9000000000009032 .... orig_r3 0xc0000000001e538c .... ctr 0xc00000000009d550 .... link 0xc0000000001e5e34 .... xer 0x0 .... ccr 0x84022882 .... softe 0x0 .... trap 0xf01 .... dar 0x0 .... dsisr 0xf00040060000004 ... thread: :4522:4522 ...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9 :4522 4522 496.768515: 1 cycles: c0000000001e538c .perf_event_context_sched_in (/boot/vmlinux) Signed-off-by: Anju T <anju@linux.vnet.ibm.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-20 12:02:47 +07:00
# Additional ARCH settings for ppc
ifeq ($(ARCH),powerpc)
NO_PERF_REGS := 0
LIBUNWIND_LIBS := -lunwind -lunwind-ppc64
tools/perf: Map the ID values with register names Map ID values with corresponding register names. These names are then displayed when user issues perf record with the -I option followed by perf report/script with -D option. To test this patchset, Eg: $ perf record -I ls # record machine state at interrupt $ perf script -D # read the perf.data file Sample output obtained for this patch / output looks like as follows: 496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522: 0xc0000000001e538c period: 1 addr: 0 ... intr regs: mask 0x7ffffffffff ABI 64-bit .... r0 0xc0000000001e5e34 .... r1 0xc000000fe733f9a0 .... r2 0xc000000001523100 .... r3 0xc000000ffaadeb60 .... r4 0xc000000003456800 .... r5 0x73a9b5e000 .... r6 0x1e000000 .... r7 0x0 .... r8 0x0 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0x24022822 .... r13 0xc00000000feec180 .... r14 0x0 .... r15 0xc000001e4be18800 .... r16 0x0 .... r17 0xc000000ffaac5000 .... r18 0xc000000fe733f8a0 .... r19 0xc000000001523100 .... r20 0xc00000000009fd1c .... r21 0xc000000fcaa69000 .... r22 0xc0000000001e4968 .... r23 0xc000000001523100 .... r24 0xc000000fe733f850 .... r25 0xc000000fcaa69000 .... r26 0xc000000003b8fcf0 .... r27 0xfffffffffffffead .... r28 0x0 .... r29 0xc000000fcaa69000 .... r30 0x1 .... r31 0x0 .... nip 0xc0000000001dd320 .... msr 0x9000000000009032 .... orig_r3 0xc0000000001e538c .... ctr 0xc00000000009d550 .... link 0xc0000000001e5e34 .... xer 0x0 .... ccr 0x84022882 .... softe 0x0 .... trap 0xf01 .... dar 0x0 .... dsisr 0xf00040060000004 ... thread: :4522:4522 ...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9 :4522 4522 496.768515: 1 cycles: c0000000001e538c .perf_event_context_sched_in (/boot/vmlinux) Signed-off-by: Anju T <anju@linux.vnet.ibm.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-20 12:02:47 +07:00
endif
# Additional ARCH settings for x86
ifeq ($(ARCH),x86)
$(call detected,CONFIG_X86)
perf tools: Fix building error in x86_64 when dwarf unwind is on When build with 'make ARCH=x86' and dwarf unwind is on, there is a compiling error: CC /home/wn/perf/arch/x86/util/unwind-libdw.o CC /home/wn/perf/arch/x86/tests/regs_load.o arch/x86/tests/regs_load.S: Assembler messages: arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push' arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop' make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1 make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24! make: *** [all] Error 2 ... Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT. 'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'. However, when building x86_64 kernel, ARCH=x86 is valid and commonly used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86' to build x86_64 perf, which causes mismatching. As __LP64__ is defined for x86_64 as well, we can consolidate the __x86_64__ check to the __LP64__ check and get rid of the IS_X86_64 IMHO. (This patch is made by Namhyung Kim when replying my v1 patch: https://lkml.org/lkml/2015/1/7/17 I modified the code to remove dependency on RAW_ARCH: https://lkml.org/lkml/2015/1/7/865 Namhyung Kim didn't provide his SOB in his original email. I add mine only for my modification.) Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com [ Namhyung provided his S-o-B on a followup to this patch thread on lkml ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-12 09:20:55 +07:00
ifeq (${IS_64_BIT}, 1)
perf tools: Build syscall table .c header from kernel's syscall_64.tbl We used libaudit to map ids to syscall names and vice-versa, but that imposes a delay in supporting new syscalls, having to wait for libaudit to get those new syscalls on its tables. To remove that delay, for x86_64 initially, grab a copy of arch/x86/entry/syscalls/syscall_64.tbl and use it to generate those tables. Syscalls currently not available in audit-libs: # trace -e copy_file_range,membarrier,mlock2,pread64,pwrite64,timerfd_create,userfaultfd Error: Invalid syscall copy_file_range, membarrier, mlock2, pread64, pwrite64, timerfd_create, userfaultfd Hint: try 'perf list syscalls:sys_enter_*' Hint: and: 'man syscalls' # With this patch: # trace -e copy_file_range,membarrier,mlock2,pread64,pwrite64,timerfd_create,userfaultfd 8505.733 ( 0.010 ms): gnome-shell/2519 timerfd_create(flags: 524288) = 36 8506.688 ( 0.005 ms): gnome-shell/2519 timerfd_create(flags: 524288) = 40 30023.097 ( 0.025 ms): qemu-system-x8/24629 pwrite64(fd: 18, buf: 0x7f63ae382000, count: 4096, pos: 529592320) = 4096 31268.712 ( 0.028 ms): qemu-system-x8/24629 pwrite64(fd: 18, buf: 0x7f63afd8b000, count: 4096, pos: 2314133504) = 4096 31268.854 ( 0.016 ms): qemu-system-x8/24629 pwrite64(fd: 18, buf: 0x7f63afda2000, count: 4096, pos: 2314137600) = 4096 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-51xfjbxevdsucmnbc4ka5r88@git.kernel.org [ Added make dep for 'prepare' in 'LIBPERF_IN', fix by Wang Nan to fix parallell build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-05 05:05:36 +07:00
CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT -DHAVE_SYSCALL_TABLE -I$(OUTPUT)arch/x86/include/generated
ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
LIBUNWIND_LIBS = -lunwind -lunwind-x86_64
$(call detected,CONFIG_X86_64)
else
LIBUNWIND_LIBS = -lunwind-x86 -llzma -lunwind
endif
NO_PERF_REGS := 0
endif
ifeq ($(ARCH),arm)
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-arm
endif
ifeq ($(ARCH),arm64)
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-aarch64
endif
ifeq ($(NO_PERF_REGS),0)
$(call detected,CONFIG_PERF_REGS)
endif
# So far there's only x86 and arm libdw unwind support merged in perf.
# Disable it on all other architectures in case libdw unwind
# support is detected in system. Add supported architectures
# to the check.
ifneq ($(ARCH),$(filter $(ARCH),x86 arm))
NO_LIBDW_DWARF_UNWIND := 1
endif
ifeq ($(LIBUNWIND_LIBS),)
NO_LIBUNWIND := 1
endif
#
# For linking with debug library, run like:
#
# make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
#
libunwind_arch_set_flags = $(eval $(libunwind_arch_set_flags_code))
define libunwind_arch_set_flags_code
FEATURE_CHECK_CFLAGS-libunwind-$(1) = -I$(LIBUNWIND_DIR)/include
FEATURE_CHECK_LDFLAGS-libunwind-$(1) = -L$(LIBUNWIND_DIR)/lib
endef
ifdef LIBUNWIND_DIR
LIBUNWIND_CFLAGS = -I$(LIBUNWIND_DIR)/include
LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib
LIBUNWIND_ARCHS = x86 x86_64 arm aarch64 debug-frame-arm debug-frame-aarch64
$(foreach libunwind_arch,$(LIBUNWIND_ARCHS),$(call libunwind_arch_set_flags,$(libunwind_arch)))
endif
# Set per-feature check compilation flags
FEATURE_CHECK_CFLAGS-libunwind = $(LIBUNWIND_CFLAGS)
FEATURE_CHECK_LDFLAGS-libunwind = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
FEATURE_CHECK_CFLAGS-libunwind-debug-frame = $(LIBUNWIND_CFLAGS)
FEATURE_CHECK_LDFLAGS-libunwind-debug-frame = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
ifeq ($(NO_PERF_REGS),0)
CFLAGS += -DHAVE_PERF_REGS_SUPPORT
endif
# for linking with debug library, run like:
# make DEBUG=1 LIBDW_DIR=/opt/libdw/
ifdef LIBDW_DIR
LIBDW_CFLAGS := -I$(LIBDW_DIR)/include
LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib
endif
FEATURE_CHECK_CFLAGS-libdw-dwarf-unwind := $(LIBDW_CFLAGS)
FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) -ldw
# for linking with debug library, run like:
# make DEBUG=1 LIBBABELTRACE_DIR=/opt/libbabeltrace/
ifdef LIBBABELTRACE_DIR
LIBBABELTRACE_CFLAGS := -I$(LIBBABELTRACE_DIR)/include
LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 05:16:58 +07:00
endif
FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 05:16:58 +07:00
FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(ARCH)/include/uapi -I$(srctree)/tools/include/uapi
# include ARCH specific config
-include $(src-perf)/arch/$(ARCH)/Makefile
ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
CFLAGS += -DHAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
endif
include $(srctree)/tools/scripts/utilities.mak
ifeq ($(call get-executable,$(FLEX)),)
dummy := $(error Error: $(FLEX) is missing on this system, please install it)
endif
ifeq ($(call get-executable,$(BISON)),)
dummy := $(error Error: $(BISON) is missing on this system, please install it)
endif
# Treat warnings as errors unless directed not to
ifneq ($(WERROR),0)
CFLAGS += -Werror
endif
ifndef DEBUG
DEBUG := 0
endif
ifeq ($(DEBUG),0)
CFLAGS += -O6
endif
ifdef PARSER_DEBUG
PARSER_DEBUG_BISON := -t
PARSER_DEBUG_FLEX := -d
CFLAGS += -DPARSER_DEBUG
$(call detected_var,PARSER_DEBUG_BISON)
$(call detected_var,PARSER_DEBUG_FLEX)
endif
# Try different combinations to accommodate systems that only have
# python[2][-config] in weird combinations but always preferring
# python2 and python2-config as per pep-0394. If we catch a
# python[-config] in version 3, the version check will kill it.
PYTHON2 := $(if $(call get-executable,python2),python2,python)
override PYTHON := $(call get-executable-or-default,PYTHON,$(PYTHON2))
PYTHON2_CONFIG := \
$(if $(call get-executable,$(PYTHON)-config),$(PYTHON)-config,python-config)
override PYTHON_CONFIG := \
$(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON2_CONFIG))
PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
FEATURE_CHECK_CFLAGS-libpython := $(PYTHON_EMBED_CCOPTS)
FEATURE_CHECK_LDFLAGS-libpython := $(PYTHON_EMBED_LDOPTS)
FEATURE_CHECK_CFLAGS-libpython-version := $(PYTHON_EMBED_CCOPTS)
FEATURE_CHECK_LDFLAGS-libpython-version := $(PYTHON_EMBED_LDOPTS)
CFLAGS += -fno-omit-frame-pointer
CFLAGS += -ggdb3
CFLAGS += -funwind-tables
CFLAGS += -Wall
CFLAGS += -Wextra
CFLAGS += -std=gnu99
# Enforce a non-executable stack, as we may regress (again) in the future by
# adding assembler files missing the .GNU-stack linker note.
LDFLAGS += -Wl,-z,noexecstack
EXTLIBS = -lpthread -lrt -lm -ldl
ifeq ($(FEATURES_DUMP),)
include $(srctree)/tools/build/Makefile.feature
else
include $(FEATURES_DUMP)
endif
ifeq ($(feature-stackprotector-all), 1)
CFLAGS += -fstack-protector-all
endif
ifeq ($(DEBUG),0)
ifeq ($(feature-fortify-source), 1)
CFLAGS += -D_FORTIFY_SOURCE=2
endif
endif
CFLAGS += -I$(src-perf)/util/include
CFLAGS += -I$(src-perf)/arch/$(ARCH)/include
CFLAGS += -I$(srctree)/tools/include/uapi
CFLAGS += -I$(srctree)/tools/include/
CFLAGS += -I$(srctree)/tools/arch/$(ARCH)/include/uapi
CFLAGS += -I$(srctree)/tools/arch/$(ARCH)/include/
CFLAGS += -I$(srctree)/tools/arch/$(ARCH)/
# $(obj-perf) for generated common-cmds.h
# $(obj-perf)/util for generated bison/flex headers
ifneq ($(OUTPUT),)
CFLAGS += -I$(obj-perf)/util
CFLAGS += -I$(obj-perf)
endif
CFLAGS += -I$(src-perf)/util
CFLAGS += -I$(src-perf)
CFLAGS += -I$(srctree)/tools/lib/
CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
ifeq ($(feature-sync-compare-and-swap), 1)
CFLAGS += -DHAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
endif
ifeq ($(feature-pthread-attr-setaffinity-np), 1)
CFLAGS += -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP
endif
ifndef NO_BIONIC
$(call feature_check,bionic)
ifeq ($(feature-bionic), 1)
BIONIC := 1
EXTLIBS := $(filter-out -lrt,$(EXTLIBS))
EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
endif
endif
ifdef NO_LIBELF
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
NO_LIBDW_DWARF_UNWIND := 1
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 19:41:12 +07:00
NO_LIBBPF := 1
else
ifeq ($(feature-libelf), 0)
ifeq ($(feature-glibc), 1)
LIBC_SUPPORT := 1
endif
ifeq ($(BIONIC),1)
LIBC_SUPPORT := 1
endif
ifeq ($(LIBC_SUPPORT),1)
msg := $(warning No libelf found, disables 'probe' tool and BPF support in 'perf record', please install libelf-dev, libelf-devel or elfutils-libelf-devel);
NO_LIBELF := 1
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
NO_LIBDW_DWARF_UNWIND := 1
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 19:41:12 +07:00
NO_LIBBPF := 1
else
ifneq ($(filter s% -static%,$(LDFLAGS),),)
msg := $(error No static glibc found, please install glibc-static);
else
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]);
endif
endif
else
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
ifndef NO_LIBDW_DWARF_UNWIND
ifneq ($(feature-libdw-dwarf-unwind),1)
NO_LIBDW_DWARF_UNWIND := 1
msg := $(warning No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR);
endif
endif
ifneq ($(feature-dwarf), 1)
msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
NO_DWARF := 1
else
ifneq ($(feature-dwarf_getlocations), 1)
msg := $(warning Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157);
else
CFLAGS += -DHAVE_DWARF_GETLOCATIONS
endif # dwarf_getlocations
endif # Dwarf support
endif # libelf support
endif # NO_LIBELF
ifdef NO_DWARF
NO_LIBDW_DWARF_UNWIND := 1
endif
ifndef NO_LIBELF
CFLAGS += -DHAVE_LIBELF_SUPPORT
EXTLIBS += -lelf
$(call detected,CONFIG_LIBELF)
ifeq ($(feature-libelf-mmap), 1)
CFLAGS += -DHAVE_LIBELF_MMAP_SUPPORT
endif
ifeq ($(feature-libelf-getphdrnum), 1)
CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
endif
ifeq ($(feature-libelf-gelf_getnote), 1)
CFLAGS += -DHAVE_GELF_GETNOTE_SUPPORT
else
msg := $(warning gelf_getnote() not found on libelf, SDT support disabled);
endif
ifeq ($(feature-libelf-getshdrstrndx), 1)
CFLAGS += -DHAVE_ELF_GETSHDRSTRNDX_SUPPORT
endif
ifndef NO_DWARF
ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
NO_DWARF := 1
else
CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
LDFLAGS += $(LIBDW_LDFLAGS)
DWARFLIBS := -ldw
ifeq ($(findstring -static,${LDFLAGS}),-static)
DWARFLIBS += -lelf -lebl -lz -llzma -lbz2
endif
EXTLIBS += ${DWARFLIBS}
$(call detected,CONFIG_DWARF)
endif # PERF_HAVE_DWARF_REGS
endif # NO_DWARF
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 19:41:12 +07:00
ifndef NO_LIBBPF
ifeq ($(feature-bpf), 1)
CFLAGS += -DHAVE_LIBBPF_SUPPORT
$(call detected,CONFIG_LIBBPF)
endif
ifndef NO_DWARF
ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
CFLAGS += -DHAVE_BPF_PROLOGUE
$(call detected,CONFIG_BPF_PROLOGUE)
else
msg := $(warning BPF prologue is not supported by architecture $(ARCH), missing regs_query_register_offset());
endif
else
msg := $(warning DWARF support is off, BPF prologue is disabled);
endif
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 19:41:12 +07:00
endif # NO_LIBBPF
endif # NO_LIBELF
ifndef NO_SDT
ifneq ($(feature-sdt), 1)
msg := $(warning No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev);
NO_SDT := 1;
else
CFLAGS += -DHAVE_SDT_EVENT
$(call detected,CONFIG_SDT_EVENT)
endif
endif
ifdef PERF_HAVE_JITDUMP
ifndef NO_LIBELF
$(call detected,CONFIG_JITDUMP)
CFLAGS += -DHAVE_JITDUMP
endif
endif
ifeq ($(ARCH),powerpc)
ifndef NO_DWARF
CFLAGS += -DHAVE_SKIP_CALLCHAIN_IDX
endif
endif
ifndef NO_LIBUNWIND
have_libunwind :=
ifeq ($(feature-libunwind-x86), 1)
$(call detected,CONFIG_LIBUNWIND_X86)
CFLAGS += -DHAVE_LIBUNWIND_X86_SUPPORT
LDFLAGS += -lunwind-x86
perf unwind: Fix compile error for static cross build Build failure for static cross-compiling on aarch64, with libunwind-x86 provided: $ file ./libunwind_for_x86_on_aarch64/lib/libunwind-x86.so.8.0.1 libunwind-x86.so.8.0.1: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, not stripped $ make LDFLAGS=-static LIBUNWIND_DIR=./libunwind_for_x86_on_aarch64 ARCH=aarch64 CROSS_COMPILE=aarch64-buildroot-linux-gnu- ~/libperf.a(libperf-in.o): In function `find_proc_info': :(.text+0xae4ac): undefined reference to `_Ux86_dwarf_search_unwind_table' ~/libperf.a(libperf-in.o): In function `_unwind__prepare_access': :(.text+0xaedd0): undefined reference to `_Ux86_create_addr_space' :(.text+0xaee24): undefined reference to `_Ux86_set_caching_policy' ~/libperf.a(libperf-in.o): In function `_unwind__flush_access': :(.text+0xaee98): undefined reference to `_Ux86_flush_cache' ~/libperf.a(libperf-in.o): In function `_unwind__finish_access': :(.text+0xaef08): undefined reference to `_Ux86_destroy_addr_space' ~/libperf.a(libperf-in.o): In function `get_entries': :(.text+0xaf148): undefined reference to `_Ux86_init_remote' :(.text+0xaf184): undefined reference to `_Ux86_get_reg' :(.text+0xaf1a4): undefined reference to `_Ux86_step' collect2: error: ld returned 1 exit status Makefile.perf:350: recipe for target '~/perf' failed make[1]: *** [~/perf] Error 1 Makefile:68: recipe for target 'all' failed make: *** [all] Error 2 This is because the remote libunwind library detected is not appended to EXTLIBS variable, which will be included between 'start-group' and 'end-group' when linking. The existing variable LIBUNWIND_LIBS is assigned to libs for local unwind, this patch introduces a new variable EXTLIBS_LIBUNWIND for storing remote libunwind libraries instead. Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1465988636-81502-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 18:03:56 +07:00
EXTLIBS_LIBUNWIND += -lunwind-x86
have_libunwind = 1
endif
ifeq ($(feature-libunwind-aarch64), 1)
$(call detected,CONFIG_LIBUNWIND_AARCH64)
CFLAGS += -DHAVE_LIBUNWIND_AARCH64_SUPPORT
LDFLAGS += -lunwind-aarch64
perf unwind: Fix compile error for static cross build Build failure for static cross-compiling on aarch64, with libunwind-x86 provided: $ file ./libunwind_for_x86_on_aarch64/lib/libunwind-x86.so.8.0.1 libunwind-x86.so.8.0.1: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, not stripped $ make LDFLAGS=-static LIBUNWIND_DIR=./libunwind_for_x86_on_aarch64 ARCH=aarch64 CROSS_COMPILE=aarch64-buildroot-linux-gnu- ~/libperf.a(libperf-in.o): In function `find_proc_info': :(.text+0xae4ac): undefined reference to `_Ux86_dwarf_search_unwind_table' ~/libperf.a(libperf-in.o): In function `_unwind__prepare_access': :(.text+0xaedd0): undefined reference to `_Ux86_create_addr_space' :(.text+0xaee24): undefined reference to `_Ux86_set_caching_policy' ~/libperf.a(libperf-in.o): In function `_unwind__flush_access': :(.text+0xaee98): undefined reference to `_Ux86_flush_cache' ~/libperf.a(libperf-in.o): In function `_unwind__finish_access': :(.text+0xaef08): undefined reference to `_Ux86_destroy_addr_space' ~/libperf.a(libperf-in.o): In function `get_entries': :(.text+0xaf148): undefined reference to `_Ux86_init_remote' :(.text+0xaf184): undefined reference to `_Ux86_get_reg' :(.text+0xaf1a4): undefined reference to `_Ux86_step' collect2: error: ld returned 1 exit status Makefile.perf:350: recipe for target '~/perf' failed make[1]: *** [~/perf] Error 1 Makefile:68: recipe for target 'all' failed make: *** [all] Error 2 This is because the remote libunwind library detected is not appended to EXTLIBS variable, which will be included between 'start-group' and 'end-group' when linking. The existing variable LIBUNWIND_LIBS is assigned to libs for local unwind, this patch introduces a new variable EXTLIBS_LIBUNWIND for storing remote libunwind libraries instead. Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1465988636-81502-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 18:03:56 +07:00
EXTLIBS_LIBUNWIND += -lunwind-aarch64
have_libunwind = 1
$(call feature_check,libunwind-debug-frame-aarch64)
ifneq ($(feature-libunwind-debug-frame-aarch64), 1)
msg := $(warning No debug_frame support found in libunwind-aarch64);
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME_AARCH64
endif
endif
ifneq ($(feature-libunwind), 1)
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
msg := $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR);
NO_LOCAL_LIBUNWIND := 1
else
have_libunwind := 1
$(call detected,CONFIG_LOCAL_LIBUNWIND)
endif
ifneq ($(have_libunwind), 1)
NO_LIBUNWIND := 1
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
endif
else
NO_LOCAL_LIBUNWIND := 1
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
endif
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 19:41:12 +07:00
ifndef NO_LIBBPF
ifneq ($(feature-bpf), 1)
msg := $(warning BPF API too old. Please install recent kernel headers. BPF support in 'perf record' is disabled.)
NO_LIBBPF := 1
endif
endif
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
dwarf-post-unwind := 1
dwarf-post-unwind-text := BUG
# setup DWARF post unwinder
ifdef NO_LIBUNWIND
ifdef NO_LIBDW_DWARF_UNWIND
msg := $(warning Disabling post unwind, no support found.);
dwarf-post-unwind := 0
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-14 06:51:29 +07:00
else
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
dwarf-post-unwind-text := libdw
$(call detected,CONFIG_LIBDW_DWARF_UNWIND)
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
endif
else
dwarf-post-unwind-text := libunwind
$(call detected,CONFIG_LIBUNWIND)
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
# Enable libunwind support by default.
ifndef NO_LIBDW_DWARF_UNWIND
NO_LIBDW_DWARF_UNWIND := 1
endif
endif
ifeq ($(dwarf-post-unwind),1)
CFLAGS += -DHAVE_DWARF_UNWIND_SUPPORT
$(call detected,CONFIG_DWARF_UNWIND)
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
else
NO_DWARF_UNWIND := 1
endif
ifndef NO_LOCAL_LIBUNWIND
ifeq ($(ARCH),$(filter $(ARCH),arm arm64))
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
$(call feature_check,libunwind-debug-frame)
ifneq ($(feature-libunwind-debug-frame), 1)
msg := $(warning No debug_frame support found in libunwind);
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-14 06:51:29 +07:00
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
else
# non-ARM has no dwarf_find_debug_frame() function:
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
EXTLIBS += $(LIBUNWIND_LIBS)
LDFLAGS += $(LIBUNWIND_LIBS)
endif
ifndef NO_LIBUNWIND
CFLAGS += -DHAVE_LIBUNWIND_SUPPORT
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:58 +07:00
CFLAGS += $(LIBUNWIND_CFLAGS)
LDFLAGS += $(LIBUNWIND_LDFLAGS)
perf unwind: Fix compile error for static cross build Build failure for static cross-compiling on aarch64, with libunwind-x86 provided: $ file ./libunwind_for_x86_on_aarch64/lib/libunwind-x86.so.8.0.1 libunwind-x86.so.8.0.1: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, not stripped $ make LDFLAGS=-static LIBUNWIND_DIR=./libunwind_for_x86_on_aarch64 ARCH=aarch64 CROSS_COMPILE=aarch64-buildroot-linux-gnu- ~/libperf.a(libperf-in.o): In function `find_proc_info': :(.text+0xae4ac): undefined reference to `_Ux86_dwarf_search_unwind_table' ~/libperf.a(libperf-in.o): In function `_unwind__prepare_access': :(.text+0xaedd0): undefined reference to `_Ux86_create_addr_space' :(.text+0xaee24): undefined reference to `_Ux86_set_caching_policy' ~/libperf.a(libperf-in.o): In function `_unwind__flush_access': :(.text+0xaee98): undefined reference to `_Ux86_flush_cache' ~/libperf.a(libperf-in.o): In function `_unwind__finish_access': :(.text+0xaef08): undefined reference to `_Ux86_destroy_addr_space' ~/libperf.a(libperf-in.o): In function `get_entries': :(.text+0xaf148): undefined reference to `_Ux86_init_remote' :(.text+0xaf184): undefined reference to `_Ux86_get_reg' :(.text+0xaf1a4): undefined reference to `_Ux86_step' collect2: error: ld returned 1 exit status Makefile.perf:350: recipe for target '~/perf' failed make[1]: *** [~/perf] Error 1 Makefile:68: recipe for target 'all' failed make: *** [all] Error 2 This is because the remote libunwind library detected is not appended to EXTLIBS variable, which will be included between 'start-group' and 'end-group' when linking. The existing variable LIBUNWIND_LIBS is assigned to libs for local unwind, this patch introduces a new variable EXTLIBS_LIBUNWIND for storing remote libunwind libraries instead. Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1465988636-81502-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 18:03:56 +07:00
EXTLIBS += $(EXTLIBS_LIBUNWIND)
endif
ifndef NO_LIBAUDIT
ifneq ($(feature-libaudit), 1)
msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev);
NO_LIBAUDIT := 1
else
CFLAGS += -DHAVE_LIBAUDIT_SUPPORT
EXTLIBS += -laudit
$(call detected,CONFIG_AUDIT)
endif
endif
ifndef NO_LIBCRYPTO
ifneq ($(feature-libcrypto), 1)
msg := $(warning No libcrypto.h found, disables jitted code injection, please install libssl-devel or libssl-dev);
NO_LIBCRYPTO := 1
else
CFLAGS += -DHAVE_LIBCRYPTO_SUPPORT
EXTLIBS += -lcrypto
$(call detected,CONFIG_CRYPTO)
endif
endif
ifdef NO_NEWT
NO_SLANG=1
endif
ifndef NO_SLANG
ifneq ($(feature-libslang), 1)
msg := $(warning slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev);
NO_SLANG := 1
else
# Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
CFLAGS += -I/usr/include/slang
CFLAGS += -DHAVE_SLANG_SUPPORT
EXTLIBS += -lslang
$(call detected,CONFIG_SLANG)
endif
endif
ifndef NO_GTK2
FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
ifneq ($(feature-gtk2), 1)
msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
NO_GTK2 := 1
else
ifeq ($(feature-gtk2-infobar), 1)
GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT
endif
CFLAGS += -DHAVE_GTK2_SUPPORT
GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk+-2.0 2>/dev/null)
GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk+-2.0 2>/dev/null)
EXTLIBS += -ldl
endif
endif
grep-libs = $(filter -l%,$(1))
strip-libs = $(filter-out -l%,$(1))
ifdef NO_LIBPERL
CFLAGS += -DNO_LIBPERL
else
PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
ifneq ($(feature-libperl), 1)
CFLAGS += -DNO_LIBPERL
NO_LIBPERL := 1
msg := $(warning Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev);
else
LDFLAGS += $(PERL_EMBED_LDFLAGS)
EXTLIBS += $(PERL_EMBED_LIBADD)
$(call detected,CONFIG_LIBPERL)
endif
endif
ifeq ($(feature-timerfd), 1)
CFLAGS += -DHAVE_TIMERFD_SUPPORT
else
msg := $(warning No timerfd support. Disables 'perf kvm stat live');
endif
disable-python = $(eval $(disable-python_code))
define disable-python_code
CFLAGS += -DNO_LIBPYTHON
$(warning $1)
NO_LIBPYTHON := 1
endef
ifdef NO_LIBPYTHON
$(call disable-python,Python support disabled by user)
else
ifndef PYTHON
$(call disable-python,No python interpreter was found: disables Python support - please install python-devel/python-dev)
else
PYTHON_WORD := $(call shell-wordify,$(PYTHON))
ifndef PYTHON_CONFIG
$(call disable-python,No 'python-config' tool was found: disables Python support - please install python-devel/python-dev)
else
PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) -lutil
PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
ifneq ($(feature-libpython), 1)
$(call disable-python,No 'Python.h' (for Python 2.x support) was found: disables Python support - please install python-devel/python-dev)
else
ifneq ($(feature-libpython-version), 1)
$(warning Python 3 is not yet supported; please set)
$(warning PYTHON and/or PYTHON_CONFIG appropriately.)
$(warning If you also have Python 2 installed, then)
$(warning try something like:)
$(warning $(and ,))
$(warning $(and ,) make PYTHON=python2)
$(warning $(and ,))
$(warning Otherwise, disable Python support entirely:)
$(warning $(and ,))
$(warning $(and ,) make NO_LIBPYTHON=1)
$(warning $(and ,))
$(error $(and ,))
else
LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
EXTLIBS += $(PYTHON_EMBED_LIBADD)
LANG_BINDINGS += $(obj-perf)python/perf.so
$(call detected,CONFIG_LIBPYTHON)
endif
endif
endif
endif
endif
ifeq ($(feature-libbfd), 1)
EXTLIBS += -lbfd
# call all detections now so we get correct
# status in VF output
$(call feature_check,liberty)
$(call feature_check,liberty-z)
$(call feature_check,cplus-demangle)
ifeq ($(feature-liberty), 1)
EXTLIBS += -liberty
else
ifeq ($(feature-liberty-z), 1)
EXTLIBS += -liberty -lz
endif
endif
endif
ifdef NO_DEMANGLE
CFLAGS += -DNO_DEMANGLE
else
ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
EXTLIBS += -liberty
CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
else
ifneq ($(feature-libbfd), 1)
ifneq ($(feature-liberty), 1)
ifneq ($(feature-liberty-z), 1)
# we dont have neither HAVE_CPLUS_DEMANGLE_SUPPORT
# or any of 'bfd iberty z' trinity
ifeq ($(feature-cplus-demangle), 1)
EXTLIBS += -liberty
CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
else
msg := $(warning No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling)
CFLAGS += -DNO_DEMANGLE
endif
endif
endif
endif
endif
endif
ifneq ($(filter -lbfd,$(EXTLIBS)),)
CFLAGS += -DHAVE_LIBBFD_SUPPORT
endif
perf tools: Add gzip decompression support for kernel module Now my Archlinux box shows module symbols correctly. Before: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/date, maybe install a debug package? No kallsyms or vmlinux with build-id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 was found [drm] with build id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 not found, continuing without symbols No kallsyms or vmlinux with build-id edd931629094b660ca9dec09a1b635c8d87aa2ee was found [jbd2] with build id edd931629094b660ca9dec09a1b635c8d87aa2ee not found, continuing without symbols No kallsyms or vmlinux with build-id a7b1eada671c34933e5610bb920b2ca4945a82c3 was found [ext4] with build id a7b1eada671c34933e5610bb920b2ca4945a82c3 not found, continuing without symbols No kallsyms or vmlinux with build-id d69511fa3e5840e770336ef45b06c83fef8d74e3 was found [scsi_mod] with build id d69511fa3e5840e770336ef45b06c83fef8d74e3 not found, continuing without symbols No kallsyms or vmlinux with build-id af0430af13461af058770ee9b87afc07922c2e77 was found [libata] with build id af0430af13461af058770ee9b87afc07922c2e77 not found, continuing without symbols No kallsyms or vmlinux with build-id aaeedff8160ce631a5f0333591c6ff291201d29f was found [libahci] with build id aaeedff8160ce631a5f0333591c6ff291201d29f not found, continuing without symbols No kallsyms or vmlinux with build-id c57907712becaf662dc4981824bb372c0441d605 was found [mac80211] with build id c57907712becaf662dc4981824bb372c0441d605 not found, continuing without symbols No kallsyms or vmlinux with build-id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f was found [iwldvm] with build id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f not found, continuing without symbols No kallsyms or vmlinux with build-id 2d86086bf136bf374a2f029cf85a48194f9b950b was found [cfg80211] with build id 2d86086bf136bf374a2f029cf85a48194f9b950b not found, continuing without symbols No kallsyms or vmlinux with build-id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 was found [iwlwifi] with build id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 not found, continuing without symbols ... # # Overhead Command Shared Object Symbol # ........ ............... ....................... ........................................................ # 0.03% swapper [ext4] [k] 0x000000000000fe2e 0.03% swapper [kernel.kallsyms] [k] account_entity_enqueue 0.03% swapper [ext4] [k] 0x000000000000fc2b 0.03% irq/50-iwlwifi [iwlwifi] [k] 0x000000000000200b 0.03% swapper [kernel.kallsyms] [k] ktime_add_safe 0.03% swapper [kernel.kallsyms] [k] elv_completed_request 0.03% swapper [libata] [k] 0x0000000000003997 0.03% swapper [libahci] [k] 0x0000000000001f25 0.03% swapper [kernel.kallsyms] [k] rb_next 0.03% swapper [kernel.kallsyms] [k] blk_finish_request 0.03% swapper [ext4] [k] 0x0000000000010248 0.00% perf [kernel.kallsyms] [k] native_write_msr_safe After: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/tr, maybe install a debug package? ... # # Overhead Command Shared Object Symbol # ........ ............... ........................... ...................................................... # 0.04% kworker/u16:3 [ext4] [k] ext4_read_block_bitmap 0.03% kworker/u16:0 [mac80211] [k] ieee80211_sta_reset_beacon_monitor 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_get_bssid 0.02% firefox [e1000e] [k] __ew32_prepare 0.02% swapper [libahci] [k] ahci_handle_port_interrupt 0.02% emacs libglib-2.0.so.0.4000.0 [.] g_mutex_unlock 0.02% swapper [e1000e] [k] e1000_clean_tx_irq 0.02% dwm [kernel.kallsyms] [k] __schedule 0.02% gnome-terminal- [vdso] [.] __vdso_clock_gettime 0.02% swapper [e1000e] [k] e1000_alloc_rx_buffers 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_rx 0.01% firefox [vdso] [.] __vdso_gettimeofday 0.01% irq/50-iwlwifi [iwlwifi] [k] iwl_pcie_rxq_restock.part.13 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/87h9yexshi.fsf@sejong.aot.lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-31 14:51:38 +07:00
ifndef NO_ZLIB
ifeq ($(feature-zlib), 1)
CFLAGS += -DHAVE_ZLIB_SUPPORT
EXTLIBS += -lz
$(call detected,CONFIG_ZLIB)
perf tools: Add gzip decompression support for kernel module Now my Archlinux box shows module symbols correctly. Before: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/date, maybe install a debug package? No kallsyms or vmlinux with build-id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 was found [drm] with build id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 not found, continuing without symbols No kallsyms or vmlinux with build-id edd931629094b660ca9dec09a1b635c8d87aa2ee was found [jbd2] with build id edd931629094b660ca9dec09a1b635c8d87aa2ee not found, continuing without symbols No kallsyms or vmlinux with build-id a7b1eada671c34933e5610bb920b2ca4945a82c3 was found [ext4] with build id a7b1eada671c34933e5610bb920b2ca4945a82c3 not found, continuing without symbols No kallsyms or vmlinux with build-id d69511fa3e5840e770336ef45b06c83fef8d74e3 was found [scsi_mod] with build id d69511fa3e5840e770336ef45b06c83fef8d74e3 not found, continuing without symbols No kallsyms or vmlinux with build-id af0430af13461af058770ee9b87afc07922c2e77 was found [libata] with build id af0430af13461af058770ee9b87afc07922c2e77 not found, continuing without symbols No kallsyms or vmlinux with build-id aaeedff8160ce631a5f0333591c6ff291201d29f was found [libahci] with build id aaeedff8160ce631a5f0333591c6ff291201d29f not found, continuing without symbols No kallsyms or vmlinux with build-id c57907712becaf662dc4981824bb372c0441d605 was found [mac80211] with build id c57907712becaf662dc4981824bb372c0441d605 not found, continuing without symbols No kallsyms or vmlinux with build-id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f was found [iwldvm] with build id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f not found, continuing without symbols No kallsyms or vmlinux with build-id 2d86086bf136bf374a2f029cf85a48194f9b950b was found [cfg80211] with build id 2d86086bf136bf374a2f029cf85a48194f9b950b not found, continuing without symbols No kallsyms or vmlinux with build-id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 was found [iwlwifi] with build id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 not found, continuing without symbols ... # # Overhead Command Shared Object Symbol # ........ ............... ....................... ........................................................ # 0.03% swapper [ext4] [k] 0x000000000000fe2e 0.03% swapper [kernel.kallsyms] [k] account_entity_enqueue 0.03% swapper [ext4] [k] 0x000000000000fc2b 0.03% irq/50-iwlwifi [iwlwifi] [k] 0x000000000000200b 0.03% swapper [kernel.kallsyms] [k] ktime_add_safe 0.03% swapper [kernel.kallsyms] [k] elv_completed_request 0.03% swapper [libata] [k] 0x0000000000003997 0.03% swapper [libahci] [k] 0x0000000000001f25 0.03% swapper [kernel.kallsyms] [k] rb_next 0.03% swapper [kernel.kallsyms] [k] blk_finish_request 0.03% swapper [ext4] [k] 0x0000000000010248 0.00% perf [kernel.kallsyms] [k] native_write_msr_safe After: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/tr, maybe install a debug package? ... # # Overhead Command Shared Object Symbol # ........ ............... ........................... ...................................................... # 0.04% kworker/u16:3 [ext4] [k] ext4_read_block_bitmap 0.03% kworker/u16:0 [mac80211] [k] ieee80211_sta_reset_beacon_monitor 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_get_bssid 0.02% firefox [e1000e] [k] __ew32_prepare 0.02% swapper [libahci] [k] ahci_handle_port_interrupt 0.02% emacs libglib-2.0.so.0.4000.0 [.] g_mutex_unlock 0.02% swapper [e1000e] [k] e1000_clean_tx_irq 0.02% dwm [kernel.kallsyms] [k] __schedule 0.02% gnome-terminal- [vdso] [.] __vdso_clock_gettime 0.02% swapper [e1000e] [k] e1000_alloc_rx_buffers 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_rx 0.01% firefox [vdso] [.] __vdso_gettimeofday 0.01% irq/50-iwlwifi [iwlwifi] [k] iwl_pcie_rxq_restock.part.13 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/87h9yexshi.fsf@sejong.aot.lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-31 14:51:38 +07:00
else
NO_ZLIB := 1
endif
endif
ifndef NO_LZMA
ifeq ($(feature-lzma), 1)
CFLAGS += -DHAVE_LZMA_SUPPORT
EXTLIBS += -llzma
$(call detected,CONFIG_LZMA)
else
msg := $(warning No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev);
NO_LZMA := 1
endif
endif
ifndef NO_BACKTRACE
ifeq ($(feature-backtrace), 1)
CFLAGS += -DHAVE_BACKTRACE_SUPPORT
endif
endif
ifndef NO_LIBNUMA
ifeq ($(feature-libnuma), 0)
msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev);
NO_LIBNUMA := 1
else
tools build: Add test for presence of numa_num_possible_cpus() in libnuma The existing numa test checks only if numa.h and numa_available() are present, but that can be satisfied with an old libnuma that is not enough for the 'perf bench numa' entry, so add a test to check for that: [acme@rhel5 linux]$ make NO_AUXTRACE=1 NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin make: Entering directory `/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j2' parallel build Auto-detecting system features: ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ on ] <SNIP> config/Makefile:577: Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8 INSTALL binaries <SNIP> This fixes the build on old systems such as RHEL/CentOS 5.11. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Victor Kamensky <victor.kamensky@linaro.org> Cc: Vinson Lee <vlee@twopensource.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-zqriqkezppi2de2iyjin1tnc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-17 22:20:28 +07:00
ifeq ($(feature-numa_num_possible_cpus), 0)
msg := $(warning Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8);
NO_LIBNUMA := 1
else
CFLAGS += -DHAVE_LIBNUMA_SUPPORT
EXTLIBS += -lnuma
$(call detected,CONFIG_NUMA)
endif
endif
endif
ifdef HAVE_KVM_STAT_SUPPORT
CFLAGS += -DHAVE_KVM_STAT_SUPPORT
endif
ifeq (${IS_64_BIT}, 1)
ifndef NO_PERF_READ_VDSO32
$(call feature_check,compile-32)
ifeq ($(feature-compile-32), 1)
CFLAGS += -DHAVE_PERF_READ_VDSO32
else
NO_PERF_READ_VDSO32 := 1
endif
endif
ifneq ($(ARCH), x86)
NO_PERF_READ_VDSOX32 := 1
endif
ifndef NO_PERF_READ_VDSOX32
$(call feature_check,compile-x32)
ifeq ($(feature-compile-x32), 1)
CFLAGS += -DHAVE_PERF_READ_VDSOX32
else
NO_PERF_READ_VDSOX32 := 1
endif
endif
else
NO_PERF_READ_VDSO32 := 1
NO_PERF_READ_VDSOX32 := 1
endif
ifdef LIBBABELTRACE
$(call feature_check,libbabeltrace)
ifeq ($(feature-libbabeltrace), 1)
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 05:16:58 +07:00
CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS)
LDFLAGS += $(LIBBABELTRACE_LDFLAGS)
EXTLIBS += -lbabeltrace-ctf
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 05:17:00 +07:00
$(call detected,CONFIG_LIBBABELTRACE)
else
msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev);
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 05:16:58 +07:00
endif
endif
ifndef NO_AUXTRACE
ifeq ($(ARCH),x86)
ifeq ($(feature-get_cpuid), 0)
msg := $(warning Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc);
NO_AUXTRACE := 1
endif
endif
ifndef NO_AUXTRACE
$(call detected,CONFIG_AUXTRACE)
CFLAGS += -DHAVE_AUXTRACE_SUPPORT
endif
endif
# Among the variables below, these:
# perfexecdir
# template_dir
# mandir
# infodir
# htmldir
# ETC_PERFCONFIG (but not sysconfdir)
# can be specified as a relative path some/where/else;
# this is interpreted as relative to $(prefix) and "perf" at
# runtime figures out where they are based on the path to the executable.
# This can help installing the suite in a relocatable way.
# Make the path relative to DESTDIR, not to prefix
ifndef DESTDIR
prefix ?= $(HOME)
endif
bindir_relative = bin
bindir = $(abspath $(prefix)/$(bindir_relative))
mandir = share/man
infodir = share/info
perfexecdir = libexec/perf-core
sharedir = $(prefix)/share
template_dir = share/perf-core/templates
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 22:02:09 +07:00
STRACE_GROUPS_DIR = share/perf-core/strace/groups
htmldir = share/doc/perf-doc
tipdir = share/doc/perf-tip
srcdir = $(srctree)/tools/perf
ifeq ($(prefix),/usr)
sysconfdir = /etc
ETC_PERFCONFIG = $(sysconfdir)/perfconfig
else
sysconfdir = $(prefix)/etc
ETC_PERFCONFIG = etc/perfconfig
endif
ifndef lib
ifeq ($(ARCH)$(IS_64_BIT), x861)
lib = lib64
else
lib = lib
endif
endif # lib
libdir = $(prefix)/$(lib)
# Shell quote (do not use $(call) to accommodate ancient setups);
ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 22:02:09 +07:00
STRACE_GROUPS_DIR_SQ = $(subst ','\'',$(STRACE_GROUPS_DIR))
DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
bindir_SQ = $(subst ','\'',$(bindir))
mandir_SQ = $(subst ','\'',$(mandir))
infodir_SQ = $(subst ','\'',$(infodir))
perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
template_dir_SQ = $(subst ','\'',$(template_dir))
htmldir_SQ = $(subst ','\'',$(htmldir))
tipdir_SQ = $(subst ','\'',$(tipdir))
prefix_SQ = $(subst ','\'',$(prefix))
sysconfdir_SQ = $(subst ','\'',$(sysconfdir))
libdir_SQ = $(subst ','\'',$(libdir))
srcdir_SQ = $(subst ','\'',$(srcdir))
ifneq ($(filter /%,$(firstword $(perfexecdir))),)
perfexec_instdir = $(perfexecdir)
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 22:02:09 +07:00
STRACE_GROUPS_INSTDIR = $(STRACE_GROUPS_DIR)
tip_instdir = $(tipdir)
else
perfexec_instdir = $(prefix)/$(perfexecdir)
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 22:02:09 +07:00
STRACE_GROUPS_INSTDIR = $(prefix)/$(STRACE_GROUPS_DIR)
tip_instdir = $(prefix)/$(tipdir)
endif
perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 22:02:09 +07:00
STRACE_GROUPS_INSTDIR_SQ = $(subst ','\'',$(STRACE_GROUPS_INSTDIR))
tip_instdir_SQ = $(subst ','\'',$(tip_instdir))
perf tools: Add build and install plugins targets Adding 'plugins' target along with the libtraceevent.a, so plugins are built together with traceevent library. Adding 'install-traceevent-plugins' Makefile install target, instructing perf to install plugins into: $(HOME)/.traceevent/plugins - If installed localy under $HOME $(DESTDIR)/$(prefix)/$(libdir)/traceevent/plugins - If installed globally Examples: $ make install ... $ find ~/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/plugin_mac80211.so /home/jolsa/.traceevent/plugins/plugin_kvm.so /home/jolsa/.traceevent/plugins/plugin_scsi.so /home/jolsa/.traceevent/plugins/plugin_sched_switch.so /home/jolsa/.traceevent/plugins/plugin_xen.so /home/jolsa/.traceevent/plugins/plugin_cfg80211.so /home/jolsa/.traceevent/plugins/plugin_function.so /home/jolsa/.traceevent/plugins/plugin_kmem.so /home/jolsa/.traceevent/plugins/plugin_hrtimer.so /home/jolsa/.traceevent/plugins/plugin_jbd2.so $ sudo make install DESTDIR=/opt/perf/ ... $ find /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/plugin_kvm.so /opt/perf/lib64/traceevent/plugins/plugin_scsi.so /opt/perf/lib64/traceevent/plugins/plugin_mac80211.so /opt/perf/lib64/traceevent/plugins/plugin_hrtimer.so /opt/perf/lib64/traceevent/plugins/plugin_kmem.so /opt/perf/lib64/traceevent/plugins/plugin_jbd2.so /opt/perf/lib64/traceevent/plugins/plugin_sched_switch.so /opt/perf/lib64/traceevent/plugins/plugin_function.so /opt/perf/lib64/traceevent/plugins/plugin_cfg80211.so /opt/perf/lib64/traceevent/plugins/plugin_xen.so Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1386076182-14484-8-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-03 20:09:21 +07:00
# If we install to $(HOME) we keep the traceevent default:
# $(HOME)/.traceevent/plugins
# Otherwise we install plugins into the global $(libdir).
ifdef DESTDIR
plugindir=$(libdir)/traceevent/plugins
plugindir_SQ= $(subst ','\'',$(plugindir))
perf tools: Add build and install plugins targets Adding 'plugins' target along with the libtraceevent.a, so plugins are built together with traceevent library. Adding 'install-traceevent-plugins' Makefile install target, instructing perf to install plugins into: $(HOME)/.traceevent/plugins - If installed localy under $HOME $(DESTDIR)/$(prefix)/$(libdir)/traceevent/plugins - If installed globally Examples: $ make install ... $ find ~/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/plugin_mac80211.so /home/jolsa/.traceevent/plugins/plugin_kvm.so /home/jolsa/.traceevent/plugins/plugin_scsi.so /home/jolsa/.traceevent/plugins/plugin_sched_switch.so /home/jolsa/.traceevent/plugins/plugin_xen.so /home/jolsa/.traceevent/plugins/plugin_cfg80211.so /home/jolsa/.traceevent/plugins/plugin_function.so /home/jolsa/.traceevent/plugins/plugin_kmem.so /home/jolsa/.traceevent/plugins/plugin_hrtimer.so /home/jolsa/.traceevent/plugins/plugin_jbd2.so $ sudo make install DESTDIR=/opt/perf/ ... $ find /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/plugin_kvm.so /opt/perf/lib64/traceevent/plugins/plugin_scsi.so /opt/perf/lib64/traceevent/plugins/plugin_mac80211.so /opt/perf/lib64/traceevent/plugins/plugin_hrtimer.so /opt/perf/lib64/traceevent/plugins/plugin_kmem.so /opt/perf/lib64/traceevent/plugins/plugin_jbd2.so /opt/perf/lib64/traceevent/plugins/plugin_sched_switch.so /opt/perf/lib64/traceevent/plugins/plugin_function.so /opt/perf/lib64/traceevent/plugins/plugin_cfg80211.so /opt/perf/lib64/traceevent/plugins/plugin_xen.so Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1386076182-14484-8-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-03 20:09:21 +07:00
endif
perf tools: Factor features display code Currently the we display all detected features/libraries by following rules: - if one of the features is missing - if it's build from clean tree This patch changes changes this behavior in several ways. - We no longer display all detected features, only detected libraries are displayed by default: $ make BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] The assumption is, that above libraries are the most interesting part of the detection, while we don't care much about detection of on-exit support. - If all above libraries are detected, the default is not shown on subsequent builds. - If one of the above libraries is missing, the detection output is forced. - The features status is stored in PERF-FEATURES file and the detection output is forced in case the there's difference between the file contents and currently detected features. - If you want to see all detected features, you can use VF=1 make variable, that forces the detected features output. $ make VF=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... backtrace: [ on ] ... fortify-source: [ on ] ... gtk2-infobar: [ on ] ... libelf-getphdrnum: [ on ] ... libelf-mmap: [ on ] ... libpython-version: [ on ] ... on-exit: [ on ] ... stackprotector-all: [ on ] ... timerfd: [ on ] ... libunwind-debug-frame: [ OFF ] ... bionic: [ OFF ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:54 +07:00
print_var = $(eval $(print_var_code)) $(info $(MSG))
define print_var_code
MSG = $(shell printf '...%30s: %s' $(1) $($(1)))
endef
perf tools: Factor features display code Currently the we display all detected features/libraries by following rules: - if one of the features is missing - if it's build from clean tree This patch changes changes this behavior in several ways. - We no longer display all detected features, only detected libraries are displayed by default: $ make BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] The assumption is, that above libraries are the most interesting part of the detection, while we don't care much about detection of on-exit support. - If all above libraries are detected, the default is not shown on subsequent builds. - If one of the above libraries is missing, the detection output is forced. - The features status is stored in PERF-FEATURES file and the detection output is forced in case the there's difference between the file contents and currently detected features. - If you want to see all detected features, you can use VF=1 make variable, that forces the detected features output. $ make VF=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... backtrace: [ on ] ... fortify-source: [ on ] ... gtk2-infobar: [ on ] ... libelf-getphdrnum: [ on ] ... libelf-mmap: [ on ] ... libpython-version: [ on ] ... on-exit: [ on ] ... stackprotector-all: [ on ] ... timerfd: [ on ] ... libunwind-debug-frame: [ OFF ] ... bionic: [ OFF ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:54 +07:00
ifeq ($(VF),1)
$(call print_var,prefix)
$(call print_var,bindir)
$(call print_var,libdir)
$(call print_var,sysconfdir)
$(call print_var,LIBUNWIND_DIR)
$(call print_var,LIBDW_DIR)
ifeq ($(dwarf-post-unwind),1)
$(call feature_print_text,"DWARF post unwind library", $(dwarf-post-unwind-text))
endif
perf tools: Factor features display code Currently the we display all detected features/libraries by following rules: - if one of the features is missing - if it's build from clean tree This patch changes changes this behavior in several ways. - We no longer display all detected features, only detected libraries are displayed by default: $ make BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] The assumption is, that above libraries are the most interesting part of the detection, while we don't care much about detection of on-exit support. - If all above libraries are detected, the default is not shown on subsequent builds. - If one of the above libraries is missing, the detection output is forced. - The features status is stored in PERF-FEATURES file and the detection output is forced in case the there's difference between the file contents and currently detected features. - If you want to see all detected features, you can use VF=1 make variable, that forces the detected features output. $ make VF=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... backtrace: [ on ] ... fortify-source: [ on ] ... gtk2-infobar: [ on ] ... libelf-getphdrnum: [ on ] ... libelf-mmap: [ on ] ... libpython-version: [ on ] ... on-exit: [ on ] ... stackprotector-all: [ on ] ... timerfd: [ on ] ... libunwind-debug-frame: [ OFF ] ... bionic: [ OFF ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 22:52:54 +07:00
$(info )
endif
$(call detected_var,bindir_SQ)
$(call detected_var,PYTHON_WORD)
ifneq ($(OUTPUT),)
$(call detected_var,OUTPUT)
endif
$(call detected_var,htmldir_SQ)
$(call detected_var,infodir_SQ)
$(call detected_var,mandir_SQ)
$(call detected_var,ETC_PERFCONFIG_SQ)
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 22:02:09 +07:00
$(call detected_var,STRACE_GROUPS_DIR_SQ)
$(call detected_var,prefix_SQ)
$(call detected_var,perfexecdir_SQ)
$(call detected_var,tipdir_SQ)
$(call detected_var,srcdir_SQ)
$(call detected_var,LIBDIR)
$(call detected_var,GTK_CFLAGS)
$(call detected_var,PERL_EMBED_CCOPTS)
$(call detected_var,PYTHON_EMBED_CCOPTS)