drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
/*
|
|
|
|
* Copyright 2013 Red Hat
|
|
|
|
* All Rights Reserved.
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
|
|
* to deal in the Software without restriction, including without limitation
|
|
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice (including the next
|
|
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
|
|
* Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
|
|
|
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
|
|
|
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*/
|
|
|
|
#ifndef QXL_DRM_H
|
|
|
|
#define QXL_DRM_H
|
|
|
|
|
2015-11-30 21:10:51 +07:00
|
|
|
#include "drm.h"
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2016-04-08 01:09:39 +07:00
|
|
|
#if defined(__cplusplus)
|
|
|
|
extern "C" {
|
|
|
|
#endif
|
|
|
|
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
/* Please note that modifications to all structs defined here are
|
|
|
|
* subject to backwards-compatibility constraints.
|
|
|
|
*
|
2015-03-11 09:12:23 +07:00
|
|
|
* Do not use pointers, use __u64 instead for 32 bit / 64 bit user/kernel
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
* compatibility Keep fields aligned to their size
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define QXL_GEM_DOMAIN_CPU 0
|
|
|
|
#define QXL_GEM_DOMAIN_VRAM 1
|
|
|
|
#define QXL_GEM_DOMAIN_SURFACE 2
|
|
|
|
|
|
|
|
#define DRM_QXL_ALLOC 0x00
|
|
|
|
#define DRM_QXL_MAP 0x01
|
|
|
|
#define DRM_QXL_EXECBUFFER 0x02
|
|
|
|
#define DRM_QXL_UPDATE_AREA 0x03
|
|
|
|
#define DRM_QXL_GETPARAM 0x04
|
|
|
|
#define DRM_QXL_CLIENTCAP 0x05
|
|
|
|
|
|
|
|
#define DRM_QXL_ALLOC_SURF 0x06
|
|
|
|
|
|
|
|
struct drm_qxl_alloc {
|
2015-03-11 09:12:23 +07:00
|
|
|
__u32 size;
|
|
|
|
__u32 handle; /* 0 is an invalid handle */
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct drm_qxl_map {
|
2015-03-11 09:12:23 +07:00
|
|
|
__u64 offset; /* use for mmap system call */
|
|
|
|
__u32 handle;
|
|
|
|
__u32 pad;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* dest is the bo we are writing the relocation into
|
|
|
|
* src is bo we are relocating.
|
|
|
|
* *(dest_handle.base_addr + dest_offset) = physical_address(src_handle.addr +
|
|
|
|
* src_offset)
|
|
|
|
*/
|
|
|
|
#define QXL_RELOC_TYPE_BO 1
|
|
|
|
#define QXL_RELOC_TYPE_SURF 2
|
|
|
|
|
|
|
|
struct drm_qxl_reloc {
|
2015-03-11 09:12:23 +07:00
|
|
|
__u64 src_offset; /* offset into src_handle or src buffer */
|
|
|
|
__u64 dst_offset; /* offset in dest handle */
|
|
|
|
__u32 src_handle; /* dest handle to compute address from */
|
|
|
|
__u32 dst_handle; /* 0 if to command buffer */
|
|
|
|
__u32 reloc_type;
|
|
|
|
__u32 pad;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct drm_qxl_command {
|
2017-06-20 18:39:14 +07:00
|
|
|
__u64 command; /* void* */
|
|
|
|
__u64 relocs; /* struct drm_qxl_reloc* */
|
2015-03-11 09:12:23 +07:00
|
|
|
__u32 type;
|
|
|
|
__u32 command_size;
|
|
|
|
__u32 relocs_num;
|
|
|
|
__u32 pad;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct drm_qxl_execbuffer {
|
2015-03-11 09:12:23 +07:00
|
|
|
__u32 flags; /* for future use */
|
|
|
|
__u32 commands_num;
|
2017-06-20 18:39:14 +07:00
|
|
|
__u64 commands; /* struct drm_qxl_command* */
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct drm_qxl_update_area {
|
2015-03-11 09:12:23 +07:00
|
|
|
__u32 handle;
|
|
|
|
__u32 top;
|
|
|
|
__u32 left;
|
|
|
|
__u32 bottom;
|
|
|
|
__u32 right;
|
|
|
|
__u32 pad;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
#define QXL_PARAM_NUM_SURFACES 1 /* rom->n_surfaces */
|
|
|
|
#define QXL_PARAM_MAX_RELOCS 2
|
|
|
|
struct drm_qxl_getparam {
|
2015-03-11 09:12:23 +07:00
|
|
|
__u64 param;
|
|
|
|
__u64 value;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* these are one bit values */
|
|
|
|
struct drm_qxl_clientcap {
|
2015-03-11 09:12:23 +07:00
|
|
|
__u32 index;
|
|
|
|
__u32 pad;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct drm_qxl_alloc_surf {
|
2015-03-11 09:12:23 +07:00
|
|
|
__u32 format;
|
|
|
|
__u32 width;
|
|
|
|
__u32 height;
|
|
|
|
__s32 stride;
|
|
|
|
__u32 handle;
|
|
|
|
__u32 pad;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
#define DRM_IOCTL_QXL_ALLOC \
|
|
|
|
DRM_IOWR(DRM_COMMAND_BASE + DRM_QXL_ALLOC, struct drm_qxl_alloc)
|
|
|
|
|
|
|
|
#define DRM_IOCTL_QXL_MAP \
|
|
|
|
DRM_IOWR(DRM_COMMAND_BASE + DRM_QXL_MAP, struct drm_qxl_map)
|
|
|
|
|
|
|
|
#define DRM_IOCTL_QXL_EXECBUFFER \
|
|
|
|
DRM_IOW(DRM_COMMAND_BASE + DRM_QXL_EXECBUFFER,\
|
|
|
|
struct drm_qxl_execbuffer)
|
|
|
|
|
|
|
|
#define DRM_IOCTL_QXL_UPDATE_AREA \
|
|
|
|
DRM_IOW(DRM_COMMAND_BASE + DRM_QXL_UPDATE_AREA,\
|
|
|
|
struct drm_qxl_update_area)
|
|
|
|
|
|
|
|
#define DRM_IOCTL_QXL_GETPARAM \
|
|
|
|
DRM_IOWR(DRM_COMMAND_BASE + DRM_QXL_GETPARAM,\
|
|
|
|
struct drm_qxl_getparam)
|
|
|
|
|
|
|
|
#define DRM_IOCTL_QXL_CLIENTCAP \
|
|
|
|
DRM_IOW(DRM_COMMAND_BASE + DRM_QXL_CLIENTCAP,\
|
|
|
|
struct drm_qxl_clientcap)
|
|
|
|
|
|
|
|
#define DRM_IOCTL_QXL_ALLOC_SURF \
|
|
|
|
DRM_IOWR(DRM_COMMAND_BASE + DRM_QXL_ALLOC_SURF,\
|
|
|
|
struct drm_qxl_alloc_surf)
|
|
|
|
|
2016-04-08 01:09:39 +07:00
|
|
|
#if defined(__cplusplus)
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
#endif
|