linux_dsm_epyc7002/drivers/nvme/host/fabrics.c

1123 lines
28 KiB
C
Raw Normal View History

/*
* NVMe over Fabrics common host code.
* Copyright (c) 2015-2016 HGST, a Western Digital Company.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/parser.h>
#include <linux/seq_file.h>
#include "nvme.h"
#include "fabrics.h"
static LIST_HEAD(nvmf_transports);
static DECLARE_RWSEM(nvmf_transports_rwsem);
static LIST_HEAD(nvmf_hosts);
static DEFINE_MUTEX(nvmf_hosts_mutex);
static struct nvmf_host *nvmf_default_host;
static struct nvmf_host *__nvmf_host_find(const char *hostnqn)
{
struct nvmf_host *host;
list_for_each_entry(host, &nvmf_hosts, list) {
if (!strcmp(host->nqn, hostnqn))
return host;
}
return NULL;
}
static struct nvmf_host *nvmf_host_add(const char *hostnqn)
{
struct nvmf_host *host;
mutex_lock(&nvmf_hosts_mutex);
host = __nvmf_host_find(hostnqn);
if (host) {
kref_get(&host->ref);
goto out_unlock;
}
host = kmalloc(sizeof(*host), GFP_KERNEL);
if (!host)
goto out_unlock;
kref_init(&host->ref);
strlcpy(host->nqn, hostnqn, NVMF_NQN_SIZE);
list_add_tail(&host->list, &nvmf_hosts);
out_unlock:
mutex_unlock(&nvmf_hosts_mutex);
return host;
}
static struct nvmf_host *nvmf_host_default(void)
{
struct nvmf_host *host;
host = kmalloc(sizeof(*host), GFP_KERNEL);
if (!host)
return NULL;
kref_init(&host->ref);
uuid_gen(&host->id);
snprintf(host->nqn, NVMF_NQN_SIZE,
"nqn.2014-08.org.nvmexpress:uuid:%pUb", &host->id);
mutex_lock(&nvmf_hosts_mutex);
list_add_tail(&host->list, &nvmf_hosts);
mutex_unlock(&nvmf_hosts_mutex);
return host;
}
static void nvmf_host_destroy(struct kref *ref)
{
struct nvmf_host *host = container_of(ref, struct nvmf_host, ref);
nvme-fabrics: add-remove ctrl repeat fix Repeatedly adding then removing the same NVMe-over-Fabrics controller over and over again (shown below) can cause a kernel crash (also shown below). This patch fixes that. [nvmf]# ./setup_nvme_connections.sh traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=darkside -nqn,hostnqn=evil-wins-nqn,nr_io_queues=16 > /dev/nvme-fabrics traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=lightside -nqn,hostnqn=good-wins-nqn > /dev/nvme-fabrics [nvmf]# ./remove_nvme_connections.sh 2 echo 1 > /sys/class/nvme/nvme0/delete_controller echo 1 > /sys/class/nvme/nvme1/delete_controller [nvmf]# ./setup_nvme_connections.sh traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=darkside -nqn,hostnqn=evil-wins-nqn,nr_io_queues=16 > /dev/nvme-fabrics Killed [nvmf]# dmesg [ 313.416908] nvme nvme0: creating 16 I/O queues. [ 313.523908] nvme nvme0: new ctrl: NQN "darkside-nqn", addr 192.168.1.100:4420 [ 313.524857] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 313.525262] IP: [<ffffffff8136c60e>] strcmp+0xe/0x30 [ 313.525490] PGD 0 [ 313.525726] Oops: 0000 [#1] SMP [ 313.525900] Modules linked in: nvme_rdma nvme_fabrics nvme_core ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx4_en mlx4_ib ib_core mlx4_core [ 313.527085] CPU: 15 PID: 5856 Comm: setup_nvme_conn Not tainted 4.7.0-rc2+ #2 [ 313.527259] Hardware name: Supermicro X9DRT-F/IBQF/IBFF/X9DRT -F/IBQF/IBFF, BIOS 1.0a 10/09/2012 [ 313.527551] task: ffff88027646cd40 ti: ffff88025b980000 task.ti: ffff88025b980000 [ 313.527879] RIP: 0010:[<ffffffff8136c60e>] [<ffffffff8136c60e>] strcmp+0xe/0x30 [ 313.528232] RSP: 0018:ffff88025b983db0 EFLAGS: 00010206 [ 313.528403] RAX: 0000000000000000 RBX: ffff880471879880 RCX: fffffffffffffff1 [ 313.528594] RDX: 0000000000000000 RSI: ffff880474afa860 RDI: 0000000000000011 [ 313.528778] RBP: ffff88025b983db0 R08: ffff880474afa860 R09: ffff880471879058 [ 313.528956] R10: 000000000000002c R11: ffff88047f415000 R12: ffff880471879800 [ 313.529129] R13: ffff880471879000 R14: ffff880474afa860 R15: fffffffffffffff8 [ 313.529303] FS: 00007f778f510700(0000) GS:ffff88047fbc0000(0000) knlGS:0000000000000000 [ 313.529629] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 313.529817] CR2: 0000000000000010 CR3: 0000000274174000 CR4: 00000000000406e0 [ 313.529989] Stack: [ 313.530154] ffff88025b983e48 ffffffffa0171c74 0000000000000001 0000000000000059 [ 313.530621] ffff880476f32400 ffff88047e8add80 0000010074b33aa0 ffff880471879059 [ 313.531162] ffff88047187904b ffff880471879058 0000000000000000 ffff88047736e000 [ 313.531629] Call Trace: [ 313.531797] [<ffffffffa0171c74>] nvmf_dev_write+0x674/0x840 [nvme_fabrics] [ 313.531974] [<ffffffff81180b53>] __vfs_write+0x23/0x120 [ 313.532146] [<ffffffff8119daff>] ? __fd_install+0x1f/0xc0 [ 313.532316] [<ffffffff8119d97a>] ? __alloc_fd+0x3a/0x170 [ 313.532487] [<ffffffff811811f3>] vfs_write+0xb3/0x1b0 [ 313.532658] [<ffffffff8117e321>] ? filp_close+0x51/0x70 [ 313.532845] [<ffffffff811824e1>] SyS_write+0x41/0xa0 [ 313.533016] [<ffffffff8183055b>] entry_SYSCALL_64_fastpath+0x13/0x8f [ 313.533188] Code: 80 3a 00 75 f7 48 83 c6 01 0f b6 4e ff 48 83 c2 01 84 c9 88 4a ff 75 ed 5d c3 0f 1f 00 55 48 89 e5 eb 04 84 c0 74 18 48 83 c7 01 <0f> b6 47 ff 48 83 c6 01 3a 46 ff 74 eb 19 c0 83 c8 01 5d c3 31 [ 313.536563] RIP [<ffffffff8136c60e>] strcmp+0xe/0x30 [ 313.536815] RSP <ffff88025b983db0> [ 313.536981] CR2: 0000000000000010 [ 313.537151] ---[ end trace 3d952e590e7bc2d5 ]--- Reported-and-tested-by: Jay Freyensee <james.p.freyensee@intel.com> Signed-off-by: Ming Lin <mlin@kernel.org> Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-02 02:13:32 +07:00
mutex_lock(&nvmf_hosts_mutex);
list_del(&host->list);
mutex_unlock(&nvmf_hosts_mutex);
kfree(host);
}
static void nvmf_host_put(struct nvmf_host *host)
{
if (host)
kref_put(&host->ref, nvmf_host_destroy);
}
/**
* nvmf_get_address() - Get address/port
* @ctrl: Host NVMe controller instance which we got the address
* @buf: OUTPUT parameter that will contain the address/port
* @size: buffer size
*/
int nvmf_get_address(struct nvme_ctrl *ctrl, char *buf, int size)
{
int len = 0;
if (ctrl->opts->mask & NVMF_OPT_TRADDR)
len += snprintf(buf, size, "traddr=%s", ctrl->opts->traddr);
if (ctrl->opts->mask & NVMF_OPT_TRSVCID)
len += snprintf(buf + len, size - len, "%strsvcid=%s",
(len) ? "," : "", ctrl->opts->trsvcid);
if (ctrl->opts->mask & NVMF_OPT_HOST_TRADDR)
len += snprintf(buf + len, size - len, "%shost_traddr=%s",
(len) ? "," : "", ctrl->opts->host_traddr);
len += snprintf(buf + len, size - len, "\n");
return len;
}
EXPORT_SYMBOL_GPL(nvmf_get_address);
/**
* nvmf_reg_read32() - NVMe Fabrics "Property Get" API function.
* @ctrl: Host NVMe controller instance maintaining the admin
* queue used to submit the property read command to
* the allocated NVMe controller resource on the target system.
* @off: Starting offset value of the targeted property
* register (see the fabrics section of the NVMe standard).
* @val: OUTPUT parameter that will contain the value of
* the property after a successful read.
*
* Used by the host system to retrieve a 32-bit capsule property value
* from an NVMe controller on the target system.
*
* ("Capsule property" is an "PCIe register concept" applied to the
* NVMe fabrics space.)
*
* Return:
* 0: successful read
* > 0: NVMe error status code
* < 0: Linux errno error code
*/
int nvmf_reg_read32(struct nvme_ctrl *ctrl, u32 off, u32 *val)
{
struct nvme_command cmd;
union nvme_result res;
int ret;
memset(&cmd, 0, sizeof(cmd));
cmd.prop_get.opcode = nvme_fabrics_command;
cmd.prop_get.fctype = nvme_fabrics_type_property_get;
cmd.prop_get.offset = cpu_to_le32(off);
ret = __nvme_submit_sync_cmd(ctrl->admin_q, &cmd, &res, NULL, 0, 0,
NVME_QID_ANY, 0, 0);
if (ret >= 0)
*val = le64_to_cpu(res.u64);
if (unlikely(ret != 0))
dev_err(ctrl->device,
"Property Get error: %d, offset %#x\n",
ret > 0 ? ret & ~NVME_SC_DNR : ret, off);
return ret;
}
EXPORT_SYMBOL_GPL(nvmf_reg_read32);
/**
* nvmf_reg_read64() - NVMe Fabrics "Property Get" API function.
* @ctrl: Host NVMe controller instance maintaining the admin
* queue used to submit the property read command to
* the allocated controller resource on the target system.
* @off: Starting offset value of the targeted property
* register (see the fabrics section of the NVMe standard).
* @val: OUTPUT parameter that will contain the value of
* the property after a successful read.
*
* Used by the host system to retrieve a 64-bit capsule property value
* from an NVMe controller on the target system.
*
* ("Capsule property" is an "PCIe register concept" applied to the
* NVMe fabrics space.)
*
* Return:
* 0: successful read
* > 0: NVMe error status code
* < 0: Linux errno error code
*/
int nvmf_reg_read64(struct nvme_ctrl *ctrl, u32 off, u64 *val)
{
struct nvme_command cmd;
union nvme_result res;
int ret;
memset(&cmd, 0, sizeof(cmd));
cmd.prop_get.opcode = nvme_fabrics_command;
cmd.prop_get.fctype = nvme_fabrics_type_property_get;
cmd.prop_get.attrib = 1;
cmd.prop_get.offset = cpu_to_le32(off);
ret = __nvme_submit_sync_cmd(ctrl->admin_q, &cmd, &res, NULL, 0, 0,
NVME_QID_ANY, 0, 0);
if (ret >= 0)
*val = le64_to_cpu(res.u64);
if (unlikely(ret != 0))
dev_err(ctrl->device,
"Property Get error: %d, offset %#x\n",
ret > 0 ? ret & ~NVME_SC_DNR : ret, off);
return ret;
}
EXPORT_SYMBOL_GPL(nvmf_reg_read64);
/**
* nvmf_reg_write32() - NVMe Fabrics "Property Write" API function.
* @ctrl: Host NVMe controller instance maintaining the admin
* queue used to submit the property read command to
* the allocated NVMe controller resource on the target system.
* @off: Starting offset value of the targeted property
* register (see the fabrics section of the NVMe standard).
* @val: Input parameter that contains the value to be
* written to the property.
*
* Used by the NVMe host system to write a 32-bit capsule property value
* to an NVMe controller on the target system.
*
* ("Capsule property" is an "PCIe register concept" applied to the
* NVMe fabrics space.)
*
* Return:
* 0: successful write
* > 0: NVMe error status code
* < 0: Linux errno error code
*/
int nvmf_reg_write32(struct nvme_ctrl *ctrl, u32 off, u32 val)
{
struct nvme_command cmd;
int ret;
memset(&cmd, 0, sizeof(cmd));
cmd.prop_set.opcode = nvme_fabrics_command;
cmd.prop_set.fctype = nvme_fabrics_type_property_set;
cmd.prop_set.attrib = 0;
cmd.prop_set.offset = cpu_to_le32(off);
cmd.prop_set.value = cpu_to_le64(val);
ret = __nvme_submit_sync_cmd(ctrl->admin_q, &cmd, NULL, NULL, 0, 0,
NVME_QID_ANY, 0, 0);
if (unlikely(ret))
dev_err(ctrl->device,
"Property Set error: %d, offset %#x\n",
ret > 0 ? ret & ~NVME_SC_DNR : ret, off);
return ret;
}
EXPORT_SYMBOL_GPL(nvmf_reg_write32);
/**
* nvmf_log_connect_error() - Error-parsing-diagnostic print
* out function for connect() errors.
*
* @ctrl: the specific /dev/nvmeX device that had the error.
*
* @errval: Error code to be decoded in a more human-friendly
* printout.
*
* @offset: For use with the NVMe error code NVME_SC_CONNECT_INVALID_PARAM.
*
* @cmd: This is the SQE portion of a submission capsule.
*
* @data: This is the "Data" portion of a submission capsule.
*/
static void nvmf_log_connect_error(struct nvme_ctrl *ctrl,
int errval, int offset, struct nvme_command *cmd,
struct nvmf_connect_data *data)
{
int err_sctype = errval & (~NVME_SC_DNR);
switch (err_sctype) {
case (NVME_SC_CONNECT_INVALID_PARAM):
if (offset >> 16) {
char *inv_data = "Connect Invalid Data Parameter";
switch (offset & 0xffff) {
case (offsetof(struct nvmf_connect_data, cntlid)):
dev_err(ctrl->device,
"%s, cntlid: %d\n",
inv_data, data->cntlid);
break;
case (offsetof(struct nvmf_connect_data, hostnqn)):
dev_err(ctrl->device,
"%s, hostnqn \"%s\"\n",
inv_data, data->hostnqn);
break;
case (offsetof(struct nvmf_connect_data, subsysnqn)):
dev_err(ctrl->device,
"%s, subsysnqn \"%s\"\n",
inv_data, data->subsysnqn);
break;
default:
dev_err(ctrl->device,
"%s, starting byte offset: %d\n",
inv_data, offset & 0xffff);
break;
}
} else {
char *inv_sqe = "Connect Invalid SQE Parameter";
switch (offset) {
case (offsetof(struct nvmf_connect_command, qid)):
dev_err(ctrl->device,
"%s, qid %d\n",
inv_sqe, cmd->connect.qid);
break;
default:
dev_err(ctrl->device,
"%s, starting byte offset: %d\n",
inv_sqe, offset);
}
}
break;
case NVME_SC_CONNECT_INVALID_HOST:
dev_err(ctrl->device,
"Connect for subsystem %s is not allowed, hostnqn: %s\n",
data->subsysnqn, data->hostnqn);
break;
case NVME_SC_CONNECT_CTRL_BUSY:
dev_err(ctrl->device,
"Connect command failed: controller is busy or not available\n");
break;
case NVME_SC_CONNECT_FORMAT:
dev_err(ctrl->device,
"Connect incompatible format: %d",
cmd->connect.recfmt);
break;
default:
dev_err(ctrl->device,
"Connect command failed, error wo/DNR bit: %d\n",
err_sctype);
break;
} /* switch (err_sctype) */
}
/**
* nvmf_connect_admin_queue() - NVMe Fabrics Admin Queue "Connect"
* API function.
* @ctrl: Host nvme controller instance used to request
* a new NVMe controller allocation on the target
* system and establish an NVMe Admin connection to
* that controller.
*
* This function enables an NVMe host device to request a new allocation of
* an NVMe controller resource on a target system as well establish a
* fabrics-protocol connection of the NVMe Admin queue between the
* host system device and the allocated NVMe controller on the
* target system via a NVMe Fabrics "Connect" command.
*
* Return:
* 0: success
* > 0: NVMe error status code
* < 0: Linux errno error code
*
*/
int nvmf_connect_admin_queue(struct nvme_ctrl *ctrl)
{
struct nvme_command cmd;
union nvme_result res;
struct nvmf_connect_data *data;
int ret;
memset(&cmd, 0, sizeof(cmd));
cmd.connect.opcode = nvme_fabrics_command;
cmd.connect.fctype = nvme_fabrics_type_connect;
cmd.connect.qid = 0;
cmd.connect.sqsize = cpu_to_le16(NVME_AQ_DEPTH - 1);
/*
* Set keep-alive timeout in seconds granularity (ms * 1000)
* and add a grace period for controller kato enforcement
*/
cmd.connect.kato = ctrl->opts->discovery_nqn ? 0 :
cpu_to_le32((ctrl->kato + NVME_KATO_GRACE) * 1000);
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
uuid_copy(&data->hostid, &ctrl->opts->host->id);
data->cntlid = cpu_to_le16(0xffff);
strncpy(data->subsysnqn, ctrl->opts->subsysnqn, NVMF_NQN_SIZE);
strncpy(data->hostnqn, ctrl->opts->host->nqn, NVMF_NQN_SIZE);
ret = __nvme_submit_sync_cmd(ctrl->admin_q, &cmd, &res,
data, sizeof(*data), 0, NVME_QID_ANY, 1,
BLK_MQ_REQ_RESERVED | BLK_MQ_REQ_NOWAIT);
if (ret) {
nvmf_log_connect_error(ctrl, ret, le32_to_cpu(res.u32),
&cmd, data);
goto out_free_data;
}
ctrl->cntlid = le16_to_cpu(res.u16);
out_free_data:
kfree(data);
return ret;
}
EXPORT_SYMBOL_GPL(nvmf_connect_admin_queue);
/**
* nvmf_connect_io_queue() - NVMe Fabrics I/O Queue "Connect"
* API function.
* @ctrl: Host nvme controller instance used to establish an
* NVMe I/O queue connection to the already allocated NVMe
* controller on the target system.
* @qid: NVMe I/O queue number for the new I/O connection between
* host and target (note qid == 0 is illegal as this is
* the Admin queue, per NVMe standard).
*
* This function issues a fabrics-protocol connection
* of a NVMe I/O queue (via NVMe Fabrics "Connect" command)
* between the host system device and the allocated NVMe controller
* on the target system.
*
* Return:
* 0: success
* > 0: NVMe error status code
* < 0: Linux errno error code
*/
int nvmf_connect_io_queue(struct nvme_ctrl *ctrl, u16 qid)
{
struct nvme_command cmd;
struct nvmf_connect_data *data;
union nvme_result res;
int ret;
memset(&cmd, 0, sizeof(cmd));
cmd.connect.opcode = nvme_fabrics_command;
cmd.connect.fctype = nvme_fabrics_type_connect;
cmd.connect.qid = cpu_to_le16(qid);
cmd.connect.sqsize = cpu_to_le16(ctrl->sqsize);
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
uuid_copy(&data->hostid, &ctrl->opts->host->id);
data->cntlid = cpu_to_le16(ctrl->cntlid);
strncpy(data->subsysnqn, ctrl->opts->subsysnqn, NVMF_NQN_SIZE);
strncpy(data->hostnqn, ctrl->opts->host->nqn, NVMF_NQN_SIZE);
ret = __nvme_submit_sync_cmd(ctrl->connect_q, &cmd, &res,
data, sizeof(*data), 0, qid, 1,
BLK_MQ_REQ_RESERVED | BLK_MQ_REQ_NOWAIT);
if (ret) {
nvmf_log_connect_error(ctrl, ret, le32_to_cpu(res.u32),
&cmd, data);
}
kfree(data);
return ret;
}
EXPORT_SYMBOL_GPL(nvmf_connect_io_queue);
bool nvmf_should_reconnect(struct nvme_ctrl *ctrl)
{
if (ctrl->opts->max_reconnects != -1 &&
ctrl->nr_reconnects < ctrl->opts->max_reconnects)
return true;
return false;
}
EXPORT_SYMBOL_GPL(nvmf_should_reconnect);
/**
* nvmf_register_transport() - NVMe Fabrics Library registration function.
* @ops: Transport ops instance to be registered to the
* common fabrics library.
*
* API function that registers the type of specific transport fabric
* being implemented to the common NVMe fabrics library. Part of
* the overall init sequence of starting up a fabrics driver.
*/
int nvmf_register_transport(struct nvmf_transport_ops *ops)
{
if (!ops->create_ctrl)
return -EINVAL;
down_write(&nvmf_transports_rwsem);
list_add_tail(&ops->entry, &nvmf_transports);
up_write(&nvmf_transports_rwsem);
return 0;
}
EXPORT_SYMBOL_GPL(nvmf_register_transport);
/**
* nvmf_unregister_transport() - NVMe Fabrics Library unregistration function.
* @ops: Transport ops instance to be unregistered from the
* common fabrics library.
*
* Fabrics API function that unregisters the type of specific transport
* fabric being implemented from the common NVMe fabrics library.
* Part of the overall exit sequence of unloading the implemented driver.
*/
void nvmf_unregister_transport(struct nvmf_transport_ops *ops)
{
down_write(&nvmf_transports_rwsem);
list_del(&ops->entry);
up_write(&nvmf_transports_rwsem);
}
EXPORT_SYMBOL_GPL(nvmf_unregister_transport);
static struct nvmf_transport_ops *nvmf_lookup_transport(
struct nvmf_ctrl_options *opts)
{
struct nvmf_transport_ops *ops;
lockdep_assert_held(&nvmf_transports_rwsem);
list_for_each_entry(ops, &nvmf_transports, entry) {
if (strcmp(ops->name, opts->transport) == 0)
return ops;
}
return NULL;
}
/*
* For something we're not in a state to send to the device the default action
* is to busy it and retry it after the controller state is recovered. However,
* anything marked for failfast or nvme multipath is immediately failed.
*
* Note: commands used to initialize the controller will be marked for failfast.
* Note: nvme cli/ioctl commands are marked for failfast.
*/
blk_status_t nvmf_fail_nonready_command(struct request *rq)
nvme: expand nvmf_check_if_ready checks The nvmf_check_if_ready() checks that were added are very simplistic. As such, the routine allows a lot of cases to fail ios during windows of reset or re-connection. In cases where there are not multi-path options present, the error goes back to the callee - the filesystem or application. Not good. The common routine was rewritten and calling syntax slightly expanded so that per-transport is_ready routines don't need to be present. The transports now call the routine directly. The routine is now a fabrics routine rather than an inline function. The routine now looks at controller state to decide the action to take. Some states mandate io failure. Others define the condition where a command can be accepted. When the decision is unclear, a generic queue-or-reject check is made to look for failfast or multipath ios and only fails the io if it is so marked. Otherwise, the io will be queued and wait for the controller state to resolve. Admin commands issued via ioctl share a live admin queue with commands from the transport for controller init. The ioctls could be intermixed with the initialization commands. It's possible for the ioctl cmd to be issued prior to the controller being enabled. To block this, the ioctl admin commands need to be distinguished from admin commands used for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to reflect this division and set it on ioctls requests. As the nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(), ensure that commands allocated by the ioctl path (actually anything in core.c) preps the nvme_req(req) before starting the io. This will preserve the USERCMD flag during execution and/or retry. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.e> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-12 22:16:15 +07:00
{
if (!blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH))
return BLK_STS_RESOURCE;
nvme_req(rq)->status = NVME_SC_ABORT_REQ;
return BLK_STS_IOERR;
}
EXPORT_SYMBOL_GPL(nvmf_fail_nonready_command);
nvme: expand nvmf_check_if_ready checks The nvmf_check_if_ready() checks that were added are very simplistic. As such, the routine allows a lot of cases to fail ios during windows of reset or re-connection. In cases where there are not multi-path options present, the error goes back to the callee - the filesystem or application. Not good. The common routine was rewritten and calling syntax slightly expanded so that per-transport is_ready routines don't need to be present. The transports now call the routine directly. The routine is now a fabrics routine rather than an inline function. The routine now looks at controller state to decide the action to take. Some states mandate io failure. Others define the condition where a command can be accepted. When the decision is unclear, a generic queue-or-reject check is made to look for failfast or multipath ios and only fails the io if it is so marked. Otherwise, the io will be queued and wait for the controller state to resolve. Admin commands issued via ioctl share a live admin queue with commands from the transport for controller init. The ioctls could be intermixed with the initialization commands. It's possible for the ioctl cmd to be issued prior to the controller being enabled. To block this, the ioctl admin commands need to be distinguished from admin commands used for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to reflect this division and set it on ioctls requests. As the nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(), ensure that commands allocated by the ioctl path (actually anything in core.c) preps the nvme_req(req) before starting the io. This will preserve the USERCMD flag during execution and/or retry. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.e> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-12 22:16:15 +07:00
bool __nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq,
bool queue_live)
{
struct nvme_command *cmd = nvme_req(rq)->cmd;
nvme: expand nvmf_check_if_ready checks The nvmf_check_if_ready() checks that were added are very simplistic. As such, the routine allows a lot of cases to fail ios during windows of reset or re-connection. In cases where there are not multi-path options present, the error goes back to the callee - the filesystem or application. Not good. The common routine was rewritten and calling syntax slightly expanded so that per-transport is_ready routines don't need to be present. The transports now call the routine directly. The routine is now a fabrics routine rather than an inline function. The routine now looks at controller state to decide the action to take. Some states mandate io failure. Others define the condition where a command can be accepted. When the decision is unclear, a generic queue-or-reject check is made to look for failfast or multipath ios and only fails the io if it is so marked. Otherwise, the io will be queued and wait for the controller state to resolve. Admin commands issued via ioctl share a live admin queue with commands from the transport for controller init. The ioctls could be intermixed with the initialization commands. It's possible for the ioctl cmd to be issued prior to the controller being enabled. To block this, the ioctl admin commands need to be distinguished from admin commands used for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to reflect this division and set it on ioctls requests. As the nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(), ensure that commands allocated by the ioctl path (actually anything in core.c) preps the nvme_req(req) before starting the io. This will preserve the USERCMD flag during execution and/or retry. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.e> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-12 22:16:15 +07:00
switch (ctrl->state) {
case NVME_CTRL_NEW:
case NVME_CTRL_CONNECTING:
case NVME_CTRL_DELETING:
/*
* If queue is live, allow only commands that are internally
* generated pass through. These are commands on the admin
* queue to initialize the controller. This will reject any
* ioctl admin cmds received while initializing.
*/
if (queue_live && !(nvme_req(rq)->flags & NVME_REQ_USERCMD))
return true;
nvme: expand nvmf_check_if_ready checks The nvmf_check_if_ready() checks that were added are very simplistic. As such, the routine allows a lot of cases to fail ios during windows of reset or re-connection. In cases where there are not multi-path options present, the error goes back to the callee - the filesystem or application. Not good. The common routine was rewritten and calling syntax slightly expanded so that per-transport is_ready routines don't need to be present. The transports now call the routine directly. The routine is now a fabrics routine rather than an inline function. The routine now looks at controller state to decide the action to take. Some states mandate io failure. Others define the condition where a command can be accepted. When the decision is unclear, a generic queue-or-reject check is made to look for failfast or multipath ios and only fails the io if it is so marked. Otherwise, the io will be queued and wait for the controller state to resolve. Admin commands issued via ioctl share a live admin queue with commands from the transport for controller init. The ioctls could be intermixed with the initialization commands. It's possible for the ioctl cmd to be issued prior to the controller being enabled. To block this, the ioctl admin commands need to be distinguished from admin commands used for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to reflect this division and set it on ioctls requests. As the nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(), ensure that commands allocated by the ioctl path (actually anything in core.c) preps the nvme_req(req) before starting the io. This will preserve the USERCMD flag during execution and/or retry. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.e> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-12 22:16:15 +07:00
/*
* If the queue is not live, allow only a connect command. This
* will reject any ioctl admin cmd as well as initialization
* commands if the controller reverted the queue to non-live.
nvme: expand nvmf_check_if_ready checks The nvmf_check_if_ready() checks that were added are very simplistic. As such, the routine allows a lot of cases to fail ios during windows of reset or re-connection. In cases where there are not multi-path options present, the error goes back to the callee - the filesystem or application. Not good. The common routine was rewritten and calling syntax slightly expanded so that per-transport is_ready routines don't need to be present. The transports now call the routine directly. The routine is now a fabrics routine rather than an inline function. The routine now looks at controller state to decide the action to take. Some states mandate io failure. Others define the condition where a command can be accepted. When the decision is unclear, a generic queue-or-reject check is made to look for failfast or multipath ios and only fails the io if it is so marked. Otherwise, the io will be queued and wait for the controller state to resolve. Admin commands issued via ioctl share a live admin queue with commands from the transport for controller init. The ioctls could be intermixed with the initialization commands. It's possible for the ioctl cmd to be issued prior to the controller being enabled. To block this, the ioctl admin commands need to be distinguished from admin commands used for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to reflect this division and set it on ioctls requests. As the nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(), ensure that commands allocated by the ioctl path (actually anything in core.c) preps the nvme_req(req) before starting the io. This will preserve the USERCMD flag during execution and/or retry. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.e> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-12 22:16:15 +07:00
*/
if (!queue_live && blk_rq_is_passthrough(rq) &&
cmd->common.opcode == nvme_fabrics_command &&
cmd->fabrics.fctype == nvme_fabrics_type_connect)
return true;
return false;
nvme: expand nvmf_check_if_ready checks The nvmf_check_if_ready() checks that were added are very simplistic. As such, the routine allows a lot of cases to fail ios during windows of reset or re-connection. In cases where there are not multi-path options present, the error goes back to the callee - the filesystem or application. Not good. The common routine was rewritten and calling syntax slightly expanded so that per-transport is_ready routines don't need to be present. The transports now call the routine directly. The routine is now a fabrics routine rather than an inline function. The routine now looks at controller state to decide the action to take. Some states mandate io failure. Others define the condition where a command can be accepted. When the decision is unclear, a generic queue-or-reject check is made to look for failfast or multipath ios and only fails the io if it is so marked. Otherwise, the io will be queued and wait for the controller state to resolve. Admin commands issued via ioctl share a live admin queue with commands from the transport for controller init. The ioctls could be intermixed with the initialization commands. It's possible for the ioctl cmd to be issued prior to the controller being enabled. To block this, the ioctl admin commands need to be distinguished from admin commands used for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to reflect this division and set it on ioctls requests. As the nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(), ensure that commands allocated by the ioctl path (actually anything in core.c) preps the nvme_req(req) before starting the io. This will preserve the USERCMD flag during execution and/or retry. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.e> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-12 22:16:15 +07:00
default:
return false;
nvme: expand nvmf_check_if_ready checks The nvmf_check_if_ready() checks that were added are very simplistic. As such, the routine allows a lot of cases to fail ios during windows of reset or re-connection. In cases where there are not multi-path options present, the error goes back to the callee - the filesystem or application. Not good. The common routine was rewritten and calling syntax slightly expanded so that per-transport is_ready routines don't need to be present. The transports now call the routine directly. The routine is now a fabrics routine rather than an inline function. The routine now looks at controller state to decide the action to take. Some states mandate io failure. Others define the condition where a command can be accepted. When the decision is unclear, a generic queue-or-reject check is made to look for failfast or multipath ios and only fails the io if it is so marked. Otherwise, the io will be queued and wait for the controller state to resolve. Admin commands issued via ioctl share a live admin queue with commands from the transport for controller init. The ioctls could be intermixed with the initialization commands. It's possible for the ioctl cmd to be issued prior to the controller being enabled. To block this, the ioctl admin commands need to be distinguished from admin commands used for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to reflect this division and set it on ioctls requests. As the nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(), ensure that commands allocated by the ioctl path (actually anything in core.c) preps the nvme_req(req) before starting the io. This will preserve the USERCMD flag during execution and/or retry. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.e> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-12 22:16:15 +07:00
}
}
EXPORT_SYMBOL_GPL(__nvmf_check_ready);
nvme: expand nvmf_check_if_ready checks The nvmf_check_if_ready() checks that were added are very simplistic. As such, the routine allows a lot of cases to fail ios during windows of reset or re-connection. In cases where there are not multi-path options present, the error goes back to the callee - the filesystem or application. Not good. The common routine was rewritten and calling syntax slightly expanded so that per-transport is_ready routines don't need to be present. The transports now call the routine directly. The routine is now a fabrics routine rather than an inline function. The routine now looks at controller state to decide the action to take. Some states mandate io failure. Others define the condition where a command can be accepted. When the decision is unclear, a generic queue-or-reject check is made to look for failfast or multipath ios and only fails the io if it is so marked. Otherwise, the io will be queued and wait for the controller state to resolve. Admin commands issued via ioctl share a live admin queue with commands from the transport for controller init. The ioctls could be intermixed with the initialization commands. It's possible for the ioctl cmd to be issued prior to the controller being enabled. To block this, the ioctl admin commands need to be distinguished from admin commands used for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to reflect this division and set it on ioctls requests. As the nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(), ensure that commands allocated by the ioctl path (actually anything in core.c) preps the nvme_req(req) before starting the io. This will preserve the USERCMD flag during execution and/or retry. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.e> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-12 22:16:15 +07:00
static const match_table_t opt_tokens = {
{ NVMF_OPT_TRANSPORT, "transport=%s" },
{ NVMF_OPT_TRADDR, "traddr=%s" },
{ NVMF_OPT_TRSVCID, "trsvcid=%s" },
{ NVMF_OPT_NQN, "nqn=%s" },
{ NVMF_OPT_QUEUE_SIZE, "queue_size=%d" },
{ NVMF_OPT_NR_IO_QUEUES, "nr_io_queues=%d" },
{ NVMF_OPT_RECONNECT_DELAY, "reconnect_delay=%d" },
{ NVMF_OPT_CTRL_LOSS_TMO, "ctrl_loss_tmo=%d" },
{ NVMF_OPT_KATO, "keep_alive_tmo=%d" },
{ NVMF_OPT_HOSTNQN, "hostnqn=%s" },
{ NVMF_OPT_HOST_TRADDR, "host_traddr=%s" },
{ NVMF_OPT_HOST_ID, "hostid=%s" },
{ NVMF_OPT_DUP_CONNECT, "duplicate_connect" },
{ NVMF_OPT_ERR, NULL }
};
static int nvmf_parse_options(struct nvmf_ctrl_options *opts,
const char *buf)
{
substring_t args[MAX_OPT_ARGS];
char *options, *o, *p;
int token, ret = 0;
size_t nqnlen = 0;
int ctrl_loss_tmo = NVMF_DEF_CTRL_LOSS_TMO;
uuid_t hostid;
/* Set defaults */
opts->queue_size = NVMF_DEF_QUEUE_SIZE;
opts->nr_io_queues = num_online_cpus();
opts->reconnect_delay = NVMF_DEF_RECONNECT_DELAY;
opts->kato = NVME_DEFAULT_KATO;
opts->duplicate_connect = false;
options = o = kstrdup(buf, GFP_KERNEL);
if (!options)
return -ENOMEM;
uuid_gen(&hostid);
while ((p = strsep(&o, ",\n")) != NULL) {
if (!*p)
continue;
token = match_token(p, opt_tokens, args);
opts->mask |= token;
switch (token) {
case NVMF_OPT_TRANSPORT:
p = match_strdup(args);
if (!p) {
ret = -ENOMEM;
goto out;
}
kfree(opts->transport);
opts->transport = p;
break;
case NVMF_OPT_NQN:
p = match_strdup(args);
if (!p) {
ret = -ENOMEM;
goto out;
}
kfree(opts->subsysnqn);
opts->subsysnqn = p;
nqnlen = strlen(opts->subsysnqn);
if (nqnlen >= NVMF_NQN_SIZE) {
pr_err("%s needs to be < %d bytes\n",
opts->subsysnqn, NVMF_NQN_SIZE);
ret = -EINVAL;
goto out;
}
opts->discovery_nqn =
!(strcmp(opts->subsysnqn,
NVME_DISC_SUBSYS_NAME));
break;
case NVMF_OPT_TRADDR:
p = match_strdup(args);
if (!p) {
ret = -ENOMEM;
goto out;
}
kfree(opts->traddr);
opts->traddr = p;
break;
case NVMF_OPT_TRSVCID:
p = match_strdup(args);
if (!p) {
ret = -ENOMEM;
goto out;
}
kfree(opts->trsvcid);
opts->trsvcid = p;
break;
case NVMF_OPT_QUEUE_SIZE:
if (match_int(args, &token)) {
ret = -EINVAL;
goto out;
}
if (token < NVMF_MIN_QUEUE_SIZE ||
token > NVMF_MAX_QUEUE_SIZE) {
pr_err("Invalid queue_size %d\n", token);
ret = -EINVAL;
goto out;
}
opts->queue_size = token;
break;
case NVMF_OPT_NR_IO_QUEUES:
if (match_int(args, &token)) {
ret = -EINVAL;
goto out;
}
if (token <= 0) {
pr_err("Invalid number of IOQs %d\n", token);
ret = -EINVAL;
goto out;
}
if (opts->discovery_nqn) {
pr_debug("Ignoring nr_io_queues value for discovery controller\n");
break;
}
opts->nr_io_queues = min_t(unsigned int,
num_online_cpus(), token);
break;
case NVMF_OPT_KATO:
if (match_int(args, &token)) {
ret = -EINVAL;
goto out;
}
if (token < 0) {
pr_err("Invalid keep_alive_tmo %d\n", token);
ret = -EINVAL;
goto out;
} else if (token == 0 && !opts->discovery_nqn) {
/* Allowed for debug */
pr_warn("keep_alive_tmo 0 won't execute keep alives!!!\n");
}
opts->kato = token;
if (opts->discovery_nqn && opts->kato) {
pr_err("Discovery controllers cannot accept KATO != 0\n");
ret = -EINVAL;
goto out;
}
break;
case NVMF_OPT_CTRL_LOSS_TMO:
if (match_int(args, &token)) {
ret = -EINVAL;
goto out;
}
if (token < 0)
pr_warn("ctrl_loss_tmo < 0 will reconnect forever\n");
ctrl_loss_tmo = token;
break;
case NVMF_OPT_HOSTNQN:
if (opts->host) {
pr_err("hostnqn already user-assigned: %s\n",
opts->host->nqn);
ret = -EADDRINUSE;
goto out;
}
p = match_strdup(args);
if (!p) {
ret = -ENOMEM;
goto out;
}
nqnlen = strlen(p);
if (nqnlen >= NVMF_NQN_SIZE) {
pr_err("%s needs to be < %d bytes\n",
p, NVMF_NQN_SIZE);
kfree(p);
ret = -EINVAL;
goto out;
}
nvmf_host_put(opts->host);
opts->host = nvmf_host_add(p);
kfree(p);
if (!opts->host) {
ret = -ENOMEM;
goto out;
}
break;
case NVMF_OPT_RECONNECT_DELAY:
if (match_int(args, &token)) {
ret = -EINVAL;
goto out;
}
if (token <= 0) {
pr_err("Invalid reconnect_delay %d\n", token);
ret = -EINVAL;
goto out;
}
opts->reconnect_delay = token;
break;
case NVMF_OPT_HOST_TRADDR:
p = match_strdup(args);
if (!p) {
ret = -ENOMEM;
goto out;
}
kfree(opts->host_traddr);
opts->host_traddr = p;
break;
case NVMF_OPT_HOST_ID:
p = match_strdup(args);
if (!p) {
ret = -ENOMEM;
goto out;
}
ret = uuid_parse(p, &hostid);
if (ret) {
pr_err("Invalid hostid %s\n", p);
ret = -EINVAL;
kfree(p);
goto out;
}
kfree(p);
break;
case NVMF_OPT_DUP_CONNECT:
opts->duplicate_connect = true;
break;
default:
pr_warn("unknown parameter or missing value '%s' in ctrl creation request\n",
p);
ret = -EINVAL;
goto out;
}
}
if (opts->discovery_nqn) {
opts->kato = 0;
opts->nr_io_queues = 0;
opts->duplicate_connect = true;
}
if (ctrl_loss_tmo < 0)
opts->max_reconnects = -1;
else
opts->max_reconnects = DIV_ROUND_UP(ctrl_loss_tmo,
opts->reconnect_delay);
if (!opts->host) {
kref_get(&nvmf_default_host->ref);
opts->host = nvmf_default_host;
}
uuid_copy(&opts->host->id, &hostid);
out:
kfree(options);
return ret;
}
static int nvmf_check_required_opts(struct nvmf_ctrl_options *opts,
unsigned int required_opts)
{
if ((opts->mask & required_opts) != required_opts) {
int i;
for (i = 0; i < ARRAY_SIZE(opt_tokens); i++) {
if ((opt_tokens[i].token & required_opts) &&
!(opt_tokens[i].token & opts->mask)) {
pr_warn("missing parameter '%s'\n",
opt_tokens[i].pattern);
}
}
return -EINVAL;
}
return 0;
}
static int nvmf_check_allowed_opts(struct nvmf_ctrl_options *opts,
unsigned int allowed_opts)
{
if (opts->mask & ~allowed_opts) {
int i;
for (i = 0; i < ARRAY_SIZE(opt_tokens); i++) {
if ((opt_tokens[i].token & opts->mask) &&
(opt_tokens[i].token & ~allowed_opts)) {
pr_warn("invalid parameter '%s'\n",
opt_tokens[i].pattern);
}
}
return -EINVAL;
}
return 0;
}
void nvmf_free_options(struct nvmf_ctrl_options *opts)
{
nvmf_host_put(opts->host);
kfree(opts->transport);
kfree(opts->traddr);
kfree(opts->trsvcid);
kfree(opts->subsysnqn);
kfree(opts->host_traddr);
kfree(opts);
}
EXPORT_SYMBOL_GPL(nvmf_free_options);
#define NVMF_REQUIRED_OPTS (NVMF_OPT_TRANSPORT | NVMF_OPT_NQN)
#define NVMF_ALLOWED_OPTS (NVMF_OPT_QUEUE_SIZE | NVMF_OPT_NR_IO_QUEUES | \
NVMF_OPT_KATO | NVMF_OPT_HOSTNQN | \
NVMF_OPT_HOST_ID | NVMF_OPT_DUP_CONNECT)
static struct nvme_ctrl *
nvmf_create_ctrl(struct device *dev, const char *buf, size_t count)
{
struct nvmf_ctrl_options *opts;
struct nvmf_transport_ops *ops;
struct nvme_ctrl *ctrl;
int ret;
opts = kzalloc(sizeof(*opts), GFP_KERNEL);
if (!opts)
return ERR_PTR(-ENOMEM);
ret = nvmf_parse_options(opts, buf);
if (ret)
goto out_free_opts;
request_module("nvme-%s", opts->transport);
/*
* Check the generic options first as we need a valid transport for
* the lookup below. Then clear the generic flags so that transport
* drivers don't have to care about them.
*/
ret = nvmf_check_required_opts(opts, NVMF_REQUIRED_OPTS);
if (ret)
goto out_free_opts;
opts->mask &= ~NVMF_REQUIRED_OPTS;
down_read(&nvmf_transports_rwsem);
ops = nvmf_lookup_transport(opts);
if (!ops) {
pr_info("no handler found for transport %s.\n",
opts->transport);
ret = -EINVAL;
goto out_unlock;
}
if (!try_module_get(ops->module)) {
ret = -EBUSY;
goto out_unlock;
}
up_read(&nvmf_transports_rwsem);
ret = nvmf_check_required_opts(opts, ops->required_opts);
if (ret)
goto out_module_put;
ret = nvmf_check_allowed_opts(opts, NVMF_ALLOWED_OPTS |
ops->allowed_opts | ops->required_opts);
if (ret)
goto out_module_put;
ctrl = ops->create_ctrl(dev, opts);
if (IS_ERR(ctrl)) {
ret = PTR_ERR(ctrl);
goto out_module_put;
}
module_put(ops->module);
return ctrl;
out_module_put:
module_put(ops->module);
goto out_free_opts;
out_unlock:
up_read(&nvmf_transports_rwsem);
out_free_opts:
nvmf_free_options(opts);
return ERR_PTR(ret);
}
static struct class *nvmf_class;
static struct device *nvmf_device;
static DEFINE_MUTEX(nvmf_dev_mutex);
static ssize_t nvmf_dev_write(struct file *file, const char __user *ubuf,
size_t count, loff_t *pos)
{
struct seq_file *seq_file = file->private_data;
struct nvme_ctrl *ctrl;
const char *buf;
int ret = 0;
if (count > PAGE_SIZE)
return -ENOMEM;
buf = memdup_user_nul(ubuf, count);
if (IS_ERR(buf))
return PTR_ERR(buf);
mutex_lock(&nvmf_dev_mutex);
if (seq_file->private) {
ret = -EINVAL;
goto out_unlock;
}
ctrl = nvmf_create_ctrl(nvmf_device, buf, count);
if (IS_ERR(ctrl)) {
ret = PTR_ERR(ctrl);
goto out_unlock;
}
seq_file->private = ctrl;
out_unlock:
mutex_unlock(&nvmf_dev_mutex);
kfree(buf);
return ret ? ret : count;
}
static int nvmf_dev_show(struct seq_file *seq_file, void *private)
{
struct nvme_ctrl *ctrl;
int ret = 0;
mutex_lock(&nvmf_dev_mutex);
ctrl = seq_file->private;
if (!ctrl) {
ret = -EINVAL;
goto out_unlock;
}
seq_printf(seq_file, "instance=%d,cntlid=%d\n",
ctrl->instance, ctrl->cntlid);
out_unlock:
mutex_unlock(&nvmf_dev_mutex);
return ret;
}
static int nvmf_dev_open(struct inode *inode, struct file *file)
{
/*
* The miscdevice code initializes file->private_data, but doesn't
* make use of it later.
*/
file->private_data = NULL;
return single_open(file, nvmf_dev_show, NULL);
}
static int nvmf_dev_release(struct inode *inode, struct file *file)
{
struct seq_file *seq_file = file->private_data;
struct nvme_ctrl *ctrl = seq_file->private;
if (ctrl)
nvme_put_ctrl(ctrl);
return single_release(inode, file);
}
static const struct file_operations nvmf_dev_fops = {
.owner = THIS_MODULE,
.write = nvmf_dev_write,
.read = seq_read,
.open = nvmf_dev_open,
.release = nvmf_dev_release,
};
static struct miscdevice nvmf_misc = {
.minor = MISC_DYNAMIC_MINOR,
.name = "nvme-fabrics",
.fops = &nvmf_dev_fops,
};
static int __init nvmf_init(void)
{
int ret;
nvmf_default_host = nvmf_host_default();
if (!nvmf_default_host)
return -ENOMEM;
nvmf_class = class_create(THIS_MODULE, "nvme-fabrics");
if (IS_ERR(nvmf_class)) {
pr_err("couldn't register class nvme-fabrics\n");
ret = PTR_ERR(nvmf_class);
goto out_free_host;
}
nvmf_device =
device_create(nvmf_class, NULL, MKDEV(0, 0), NULL, "ctl");
if (IS_ERR(nvmf_device)) {
pr_err("couldn't create nvme-fabris device!\n");
ret = PTR_ERR(nvmf_device);
goto out_destroy_class;
}
ret = misc_register(&nvmf_misc);
if (ret) {
pr_err("couldn't register misc device: %d\n", ret);
goto out_destroy_device;
}
return 0;
out_destroy_device:
device_destroy(nvmf_class, MKDEV(0, 0));
out_destroy_class:
class_destroy(nvmf_class);
out_free_host:
nvmf_host_put(nvmf_default_host);
return ret;
}
static void __exit nvmf_exit(void)
{
misc_deregister(&nvmf_misc);
device_destroy(nvmf_class, MKDEV(0, 0));
class_destroy(nvmf_class);
nvmf_host_put(nvmf_default_host);
BUILD_BUG_ON(sizeof(struct nvmf_connect_command) != 64);
BUILD_BUG_ON(sizeof(struct nvmf_property_get_command) != 64);
BUILD_BUG_ON(sizeof(struct nvmf_property_set_command) != 64);
BUILD_BUG_ON(sizeof(struct nvmf_connect_data) != 1024);
}
MODULE_LICENSE("GPL v2");
module_init(nvmf_init);
module_exit(nvmf_exit);