linux_dsm_epyc7002/drivers/misc/eeprom/max6875.c

228 lines
5.4 KiB
C
Raw Normal View History

/*
* max6875.c - driver for MAX6874/MAX6875
*
* Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
*
* Based on eeprom.c
*
* The MAX6875 has a bank of registers and two banks of EEPROM.
* Address ranges are defined as follows:
* * 0x0000 - 0x0046 = configuration registers
* * 0x8000 - 0x8046 = configuration EEPROM
* * 0x8100 - 0x82FF = user EEPROM
*
* This driver makes the user EEPROM available for read.
*
* The registers & config EEPROM should be accessed via i2c-dev.
*
* The MAX6875 ignores the lowest address bit, so each chip responds to
* two addresses - 0x50/0x51 and 0x52/0x53.
*
* Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read
* address, so this driver is destructive if loaded for the wrong EEPROM chip.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
/* The MAX6875 can only read/write 16 bytes at a time */
#define SLICE_SIZE 16
#define SLICE_BITS 4
/* USER EEPROM is at addresses 0x8100 - 0x82FF */
#define USER_EEPROM_BASE 0x8100
#define USER_EEPROM_SIZE 0x0200
#define USER_EEPROM_SLICES 32
/* MAX6875 commands */
#define MAX6875_CMD_BLK_READ 0x84
/* Each client has this additional data */
struct max6875_data {
struct i2c_client *fake_client;
struct mutex update_lock;
u32 valid;
u8 data[USER_EEPROM_SIZE];
unsigned long last_updated[USER_EEPROM_SLICES];
};
static void max6875_update_slice(struct i2c_client *client, int slice)
{
struct max6875_data *data = i2c_get_clientdata(client);
int i, j, addr;
u8 *buf;
if (slice >= USER_EEPROM_SLICES)
return;
mutex_lock(&data->update_lock);
buf = &data->data[slice << SLICE_BITS];
if (!(data->valid & (1 << slice)) ||
time_after(jiffies, data->last_updated[slice])) {
dev_dbg(&client->dev, "Starting update of slice %u\n", slice);
data->valid &= ~(1 << slice);
addr = USER_EEPROM_BASE + (slice << SLICE_BITS);
/* select the eeprom address */
if (i2c_smbus_write_byte_data(client, addr >> 8, addr & 0xFF)) {
dev_err(&client->dev, "address set failed\n");
goto exit_up;
}
if (i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
if (i2c_smbus_read_i2c_block_data(client,
MAX6875_CMD_BLK_READ,
i2c: Fix the i2c_smbus_read_i2c_block_data() prototype Let the drivers specify how many bytes they want to read with i2c_smbus_read_i2c_block_data(). So far, the block count was hard-coded to I2C_SMBUS_BLOCK_MAX (32), which did not make much sense. Many driver authors complained about this before, and I believe it's about time to fix it. Right now, authors have to do technically stupid things, such as individual byte reads or full-fledged I2C messaging, to work around the problem. We do not want to encourage that. I even found that some bus drivers (e.g. i2c-amd8111) already implemented I2C block read the "right" way, that is, they didn't follow the old, broken standard. The fact that it was never noticed before just shows how little i2c_smbus_read_i2c_block_data() was used, which isn't that surprising given how broken its prototype was so far. There are some obvious compatiblity considerations: * This changes the i2c_smbus_read_i2c_block_data() prototype. Users outside the kernel tree will notice at compilation time, and will have to update their code. * User-space has access to i2c_smbus_xfer() directly using i2c-dev, so the changed expectations would affect tools such as i2cdump. In order to preserve binary compatibility, we give I2C_SMBUS_I2C_BLOCK_DATA a new numeric value, and define I2C_SMBUS_I2C_BLOCK_BROKEN with the old numeric value. When i2c-dev receives a transaction with the old value, it can convert it to the new format on the fly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 19:12:29 +07:00
SLICE_SIZE,
buf) != SLICE_SIZE) {
goto exit_up;
}
} else {
for (i = 0; i < SLICE_SIZE; i++) {
j = i2c_smbus_read_byte(client);
if (j < 0) {
goto exit_up;
}
buf[i] = j;
}
}
data->last_updated[slice] = jiffies;
data->valid |= (1 << slice);
}
exit_up:
mutex_unlock(&data->update_lock);
}
static ssize_t max6875_read(struct file *filp, struct kobject *kobj,
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 12:57:22 +07:00
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct i2c_client *client = kobj_to_i2c_client(kobj);
struct max6875_data *data = i2c_get_clientdata(client);
int slice, max_slice;
if (off > USER_EEPROM_SIZE)
return 0;
if (off + count > USER_EEPROM_SIZE)
count = USER_EEPROM_SIZE - off;
/* refresh slices which contain requested bytes */
max_slice = (off + count - 1) >> SLICE_BITS;
for (slice = (off >> SLICE_BITS); slice <= max_slice; slice++)
max6875_update_slice(client, slice);
memcpy(buf, &data->data[off], count);
return count;
}
static struct bin_attribute user_eeprom_attr = {
.attr = {
.name = "eeprom",
.mode = S_IRUGO,
},
.size = USER_EEPROM_SIZE,
.read = max6875_read,
};
static int max6875_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = client->adapter;
struct max6875_data *data;
int err;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA
| I2C_FUNC_SMBUS_READ_BYTE))
return -ENODEV;
/* Only bind to even addresses */
if (client->addr & 1)
return -ENODEV;
if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
return -ENOMEM;
/* A fake client is created on the odd address */
data->fake_client = i2c_new_dummy(client->adapter, client->addr + 1);
if (!data->fake_client) {
err = -ENOMEM;
goto exit_kfree;
}
/* Init real i2c_client */
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
err = sysfs_create_bin_file(&client->dev.kobj, &user_eeprom_attr);
if (err)
goto exit_remove_fake;
return 0;
exit_remove_fake:
i2c_unregister_device(data->fake_client);
exit_kfree:
kfree(data);
return err;
}
static int max6875_remove(struct i2c_client *client)
{
struct max6875_data *data = i2c_get_clientdata(client);
i2c_unregister_device(data->fake_client);
sysfs_remove_bin_file(&client->dev.kobj, &user_eeprom_attr);
kfree(data);
return 0;
}
static const struct i2c_device_id max6875_id[] = {
{ "max6875", 0 },
{ }
};
static struct i2c_driver max6875_driver = {
.driver = {
.name = "max6875",
},
.probe = max6875_probe,
.remove = max6875_remove,
.id_table = max6875_id,
};
static int __init max6875_init(void)
{
return i2c_add_driver(&max6875_driver);
}
static void __exit max6875_exit(void)
{
i2c_del_driver(&max6875_driver);
}
MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
MODULE_DESCRIPTION("MAX6875 driver");
MODULE_LICENSE("GPL");
module_init(max6875_init);
module_exit(max6875_exit);