linux_dsm_epyc7002/drivers/clk/qcom/clk-rcg2.c

871 lines
21 KiB
C
Raw Normal View History

/*
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/bug.h>
#include <linux/export.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/regmap.h>
#include <linux/math64.h>
#include <asm/div64.h>
#include "clk-rcg.h"
#include "common.h"
#define CMD_REG 0x0
#define CMD_UPDATE BIT(0)
#define CMD_ROOT_EN BIT(1)
#define CMD_DIRTY_CFG BIT(4)
#define CMD_DIRTY_N BIT(5)
#define CMD_DIRTY_M BIT(6)
#define CMD_DIRTY_D BIT(7)
#define CMD_ROOT_OFF BIT(31)
#define CFG_REG 0x4
#define CFG_SRC_DIV_SHIFT 0
#define CFG_SRC_SEL_SHIFT 8
#define CFG_SRC_SEL_MASK (0x7 << CFG_SRC_SEL_SHIFT)
#define CFG_MODE_SHIFT 12
#define CFG_MODE_MASK (0x3 << CFG_MODE_SHIFT)
#define CFG_MODE_DUAL_EDGE (0x2 << CFG_MODE_SHIFT)
#define M_REG 0x8
#define N_REG 0xc
#define D_REG 0x10
enum freq_policy {
FLOOR,
CEIL,
};
static int clk_rcg2_is_enabled(struct clk_hw *hw)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
u32 cmd;
int ret;
ret = regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CMD_REG, &cmd);
if (ret)
return ret;
return (cmd & CMD_ROOT_OFF) == 0;
}
static u8 clk_rcg2_get_parent(struct clk_hw *hw)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
int num_parents = clk_hw_get_num_parents(hw);
u32 cfg;
int i, ret;
ret = regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg);
if (ret)
goto err;
cfg &= CFG_SRC_SEL_MASK;
cfg >>= CFG_SRC_SEL_SHIFT;
for (i = 0; i < num_parents; i++)
if (cfg == rcg->parent_map[i].cfg)
return i;
err:
pr_debug("%s: Clock %s has invalid parent, using default.\n",
__func__, clk_hw_get_name(hw));
return 0;
}
static int update_config(struct clk_rcg2 *rcg)
{
int count, ret;
u32 cmd;
struct clk_hw *hw = &rcg->clkr.hw;
const char *name = clk_hw_get_name(hw);
ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CMD_REG,
CMD_UPDATE, CMD_UPDATE);
if (ret)
return ret;
/* Wait for update to take effect */
for (count = 500; count > 0; count--) {
ret = regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CMD_REG, &cmd);
if (ret)
return ret;
if (!(cmd & CMD_UPDATE))
return 0;
udelay(1);
}
WARN(1, "%s: rcg didn't update its configuration.", name);
return 0;
}
static int clk_rcg2_set_parent(struct clk_hw *hw, u8 index)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
int ret;
u32 cfg = rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
CFG_SRC_SEL_MASK, cfg);
if (ret)
return ret;
return update_config(rcg);
}
/*
* Calculate m/n:d rate
*
* parent_rate m
* rate = ----------- x ---
* hid_div n
*/
static unsigned long
calc_rate(unsigned long rate, u32 m, u32 n, u32 mode, u32 hid_div)
{
if (hid_div) {
rate *= 2;
rate /= hid_div + 1;
}
if (mode) {
u64 tmp = rate;
tmp *= m;
do_div(tmp, n);
rate = tmp;
}
return rate;
}
static unsigned long
clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
u32 cfg, hid_div, m = 0, n = 0, mode = 0, mask;
regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg);
if (rcg->mnd_width) {
mask = BIT(rcg->mnd_width) - 1;
regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + M_REG, &m);
m &= mask;
regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + N_REG, &n);
n = ~n;
n &= mask;
n += m;
mode = cfg & CFG_MODE_MASK;
mode >>= CFG_MODE_SHIFT;
}
mask = BIT(rcg->hid_width) - 1;
hid_div = cfg >> CFG_SRC_DIV_SHIFT;
hid_div &= mask;
return calc_rate(parent_rate, m, n, mode, hid_div);
}
static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f,
struct clk_rate_request *req,
enum freq_policy policy)
{
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
unsigned long clk_flags, rate = req->rate;
struct clk_hw *p;
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
int index;
switch (policy) {
case FLOOR:
f = qcom_find_freq_floor(f, rate);
break;
case CEIL:
f = qcom_find_freq(f, rate);
break;
default:
return -EINVAL;
};
if (!f)
return -EINVAL;
index = qcom_find_src_index(hw, rcg->parent_map, f->src);
if (index < 0)
return index;
clk_flags = clk_hw_get_flags(hw);
p = clk_hw_get_parent_by_index(hw, index);
if (clk_flags & CLK_SET_RATE_PARENT) {
if (f->pre_div) {
rate /= 2;
rate *= f->pre_div + 1;
}
if (f->n) {
u64 tmp = rate;
tmp = tmp * f->n;
do_div(tmp, f->m);
rate = tmp;
}
} else {
rate = clk_hw_get_rate(p);
}
req->best_parent_hw = p;
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
req->best_parent_rate = rate;
req->rate = f->freq;
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
return 0;
}
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
static int clk_rcg2_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
return _freq_tbl_determine_rate(hw, rcg->freq_tbl, req, CEIL);
}
static int clk_rcg2_determine_floor_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
return _freq_tbl_determine_rate(hw, rcg->freq_tbl, req, FLOOR);
}
static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
{
u32 cfg, mask;
struct clk_hw *hw = &rcg->clkr.hw;
int ret, index = qcom_find_src_index(hw, rcg->parent_map, f->src);
if (index < 0)
return index;
if (rcg->mnd_width && f->n) {
mask = BIT(rcg->mnd_width) - 1;
ret = regmap_update_bits(rcg->clkr.regmap,
rcg->cmd_rcgr + M_REG, mask, f->m);
if (ret)
return ret;
ret = regmap_update_bits(rcg->clkr.regmap,
rcg->cmd_rcgr + N_REG, mask, ~(f->n - f->m));
if (ret)
return ret;
ret = regmap_update_bits(rcg->clkr.regmap,
rcg->cmd_rcgr + D_REG, mask, ~f->n);
if (ret)
return ret;
}
mask = BIT(rcg->hid_width) - 1;
mask |= CFG_SRC_SEL_MASK | CFG_MODE_MASK;
cfg = f->pre_div << CFG_SRC_DIV_SHIFT;
cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
if (rcg->mnd_width && f->n && (f->m != f->n))
cfg |= CFG_MODE_DUAL_EDGE;
ret = regmap_update_bits(rcg->clkr.regmap,
rcg->cmd_rcgr + CFG_REG, mask, cfg);
if (ret)
return ret;
return update_config(rcg);
}
static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate,
enum freq_policy policy)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
const struct freq_tbl *f;
switch (policy) {
case FLOOR:
f = qcom_find_freq_floor(rcg->freq_tbl, rate);
break;
case CEIL:
f = qcom_find_freq(rcg->freq_tbl, rate);
break;
default:
return -EINVAL;
};
if (!f)
return -EINVAL;
return clk_rcg2_configure(rcg, f);
}
static int clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
return __clk_rcg2_set_rate(hw, rate, CEIL);
}
static int clk_rcg2_set_floor_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
return __clk_rcg2_set_rate(hw, rate, FLOOR);
}
static int clk_rcg2_set_rate_and_parent(struct clk_hw *hw,
unsigned long rate, unsigned long parent_rate, u8 index)
{
return __clk_rcg2_set_rate(hw, rate, CEIL);
}
static int clk_rcg2_set_floor_rate_and_parent(struct clk_hw *hw,
unsigned long rate, unsigned long parent_rate, u8 index)
{
return __clk_rcg2_set_rate(hw, rate, FLOOR);
}
const struct clk_ops clk_rcg2_ops = {
.is_enabled = clk_rcg2_is_enabled,
.get_parent = clk_rcg2_get_parent,
.set_parent = clk_rcg2_set_parent,
.recalc_rate = clk_rcg2_recalc_rate,
.determine_rate = clk_rcg2_determine_rate,
.set_rate = clk_rcg2_set_rate,
.set_rate_and_parent = clk_rcg2_set_rate_and_parent,
};
EXPORT_SYMBOL_GPL(clk_rcg2_ops);
const struct clk_ops clk_rcg2_floor_ops = {
.is_enabled = clk_rcg2_is_enabled,
.get_parent = clk_rcg2_get_parent,
.set_parent = clk_rcg2_set_parent,
.recalc_rate = clk_rcg2_recalc_rate,
.determine_rate = clk_rcg2_determine_floor_rate,
.set_rate = clk_rcg2_set_floor_rate,
.set_rate_and_parent = clk_rcg2_set_floor_rate_and_parent,
};
EXPORT_SYMBOL_GPL(clk_rcg2_floor_ops);
static int clk_rcg2_shared_force_enable(struct clk_hw *hw, unsigned long rate)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
const char *name = clk_hw_get_name(hw);
int ret, count;
/* force enable RCG */
ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CMD_REG,
CMD_ROOT_EN, CMD_ROOT_EN);
if (ret)
return ret;
/* wait for RCG to turn ON */
for (count = 500; count > 0; count--) {
ret = clk_rcg2_is_enabled(hw);
if (ret)
break;
udelay(1);
}
if (!count)
pr_err("%s: RCG did not turn on\n", name);
/* set clock rate */
ret = __clk_rcg2_set_rate(hw, rate, CEIL);
if (ret)
return ret;
/* clear force enable RCG */
return regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CMD_REG,
CMD_ROOT_EN, 0);
}
static int clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
/* cache the rate */
rcg->current_freq = rate;
if (!__clk_is_enabled(hw->clk))
return 0;
return clk_rcg2_shared_force_enable(hw, rcg->current_freq);
}
static unsigned long
clk_rcg2_shared_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
return rcg->current_freq = clk_rcg2_recalc_rate(hw, parent_rate);
}
static int clk_rcg2_shared_enable(struct clk_hw *hw)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
return clk_rcg2_shared_force_enable(hw, rcg->current_freq);
}
static void clk_rcg2_shared_disable(struct clk_hw *hw)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
/* switch to XO, which is the lowest entry in the freq table */
clk_rcg2_shared_set_rate(hw, rcg->freq_tbl[0].freq, 0);
}
const struct clk_ops clk_rcg2_shared_ops = {
.enable = clk_rcg2_shared_enable,
.disable = clk_rcg2_shared_disable,
.get_parent = clk_rcg2_get_parent,
.recalc_rate = clk_rcg2_shared_recalc_rate,
.determine_rate = clk_rcg2_determine_rate,
.set_rate = clk_rcg2_shared_set_rate,
};
EXPORT_SYMBOL_GPL(clk_rcg2_shared_ops);
struct frac_entry {
int num;
int den;
};
static const struct frac_entry frac_table_675m[] = { /* link rate of 270M */
{ 52, 295 }, /* 119 M */
{ 11, 57 }, /* 130.25 M */
{ 63, 307 }, /* 138.50 M */
{ 11, 50 }, /* 148.50 M */
{ 47, 206 }, /* 154 M */
{ 31, 100 }, /* 205.25 M */
{ 107, 269 }, /* 268.50 M */
{ },
};
static struct frac_entry frac_table_810m[] = { /* Link rate of 162M */
{ 31, 211 }, /* 119 M */
{ 32, 199 }, /* 130.25 M */
{ 63, 307 }, /* 138.50 M */
{ 11, 60 }, /* 148.50 M */
{ 50, 263 }, /* 154 M */
{ 31, 120 }, /* 205.25 M */
{ 119, 359 }, /* 268.50 M */
{ },
};
static int clk_edp_pixel_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
struct freq_tbl f = *rcg->freq_tbl;
const struct frac_entry *frac;
int delta = 100000;
s64 src_rate = parent_rate;
s64 request;
u32 mask = BIT(rcg->hid_width) - 1;
u32 hid_div;
if (src_rate == 810000000)
frac = frac_table_810m;
else
frac = frac_table_675m;
for (; frac->num; frac++) {
request = rate;
request *= frac->den;
request = div_s64(request, frac->num);
if ((src_rate < (request - delta)) ||
(src_rate > (request + delta)))
continue;
regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
&hid_div);
f.pre_div = hid_div;
f.pre_div >>= CFG_SRC_DIV_SHIFT;
f.pre_div &= mask;
f.m = frac->num;
f.n = frac->den;
return clk_rcg2_configure(rcg, &f);
}
return -EINVAL;
}
static int clk_edp_pixel_set_rate_and_parent(struct clk_hw *hw,
unsigned long rate, unsigned long parent_rate, u8 index)
{
/* Parent index is set statically in frequency table */
return clk_edp_pixel_set_rate(hw, rate, parent_rate);
}
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
static int clk_edp_pixel_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
const struct freq_tbl *f = rcg->freq_tbl;
const struct frac_entry *frac;
int delta = 100000;
s64 request;
u32 mask = BIT(rcg->hid_width) - 1;
u32 hid_div;
int index = qcom_find_src_index(hw, rcg->parent_map, f->src);
/* Force the correct parent */
req->best_parent_hw = clk_hw_get_parent_by_index(hw, index);
req->best_parent_rate = clk_hw_get_rate(req->best_parent_hw);
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
if (req->best_parent_rate == 810000000)
frac = frac_table_810m;
else
frac = frac_table_675m;
for (; frac->num; frac++) {
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
request = req->rate;
request *= frac->den;
request = div_s64(request, frac->num);
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
if ((req->best_parent_rate < (request - delta)) ||
(req->best_parent_rate > (request + delta)))
continue;
regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
&hid_div);
hid_div >>= CFG_SRC_DIV_SHIFT;
hid_div &= mask;
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
req->rate = calc_rate(req->best_parent_rate,
frac->num, frac->den,
!!frac->den, hid_div);
return 0;
}
return -EINVAL;
}
const struct clk_ops clk_edp_pixel_ops = {
.is_enabled = clk_rcg2_is_enabled,
.get_parent = clk_rcg2_get_parent,
.set_parent = clk_rcg2_set_parent,
.recalc_rate = clk_rcg2_recalc_rate,
.set_rate = clk_edp_pixel_set_rate,
.set_rate_and_parent = clk_edp_pixel_set_rate_and_parent,
.determine_rate = clk_edp_pixel_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_edp_pixel_ops);
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
static int clk_byte_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
const struct freq_tbl *f = rcg->freq_tbl;
int index = qcom_find_src_index(hw, rcg->parent_map, f->src);
unsigned long parent_rate, div;
u32 mask = BIT(rcg->hid_width) - 1;
struct clk_hw *p;
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
if (req->rate == 0)
return -EINVAL;
req->best_parent_hw = p = clk_hw_get_parent_by_index(hw, index);
req->best_parent_rate = parent_rate = clk_hw_round_rate(p, req->rate);
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
div = DIV_ROUND_UP((2 * parent_rate), req->rate) - 1;
div = min_t(u32, div, mask);
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
req->rate = calc_rate(parent_rate, 0, 0, 0, div);
return 0;
}
static int clk_byte_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
struct freq_tbl f = *rcg->freq_tbl;
unsigned long div;
u32 mask = BIT(rcg->hid_width) - 1;
div = DIV_ROUND_UP((2 * parent_rate), rate) - 1;
div = min_t(u32, div, mask);
f.pre_div = div;
return clk_rcg2_configure(rcg, &f);
}
static int clk_byte_set_rate_and_parent(struct clk_hw *hw,
unsigned long rate, unsigned long parent_rate, u8 index)
{
/* Parent index is set statically in frequency table */
return clk_byte_set_rate(hw, rate, parent_rate);
}
const struct clk_ops clk_byte_ops = {
.is_enabled = clk_rcg2_is_enabled,
.get_parent = clk_rcg2_get_parent,
.set_parent = clk_rcg2_set_parent,
.recalc_rate = clk_rcg2_recalc_rate,
.set_rate = clk_byte_set_rate,
.set_rate_and_parent = clk_byte_set_rate_and_parent,
.determine_rate = clk_byte_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_byte_ops);
static int clk_byte2_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
unsigned long parent_rate, div;
u32 mask = BIT(rcg->hid_width) - 1;
struct clk_hw *p;
unsigned long rate = req->rate;
if (rate == 0)
return -EINVAL;
p = req->best_parent_hw;
req->best_parent_rate = parent_rate = clk_hw_round_rate(p, rate);
div = DIV_ROUND_UP((2 * parent_rate), rate) - 1;
div = min_t(u32, div, mask);
req->rate = calc_rate(parent_rate, 0, 0, 0, div);
return 0;
}
static int clk_byte2_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
struct freq_tbl f = { 0 };
unsigned long div;
int i, num_parents = clk_hw_get_num_parents(hw);
u32 mask = BIT(rcg->hid_width) - 1;
u32 cfg;
div = DIV_ROUND_UP((2 * parent_rate), rate) - 1;
div = min_t(u32, div, mask);
f.pre_div = div;
regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg);
cfg &= CFG_SRC_SEL_MASK;
cfg >>= CFG_SRC_SEL_SHIFT;
for (i = 0; i < num_parents; i++) {
if (cfg == rcg->parent_map[i].cfg) {
f.src = rcg->parent_map[i].src;
return clk_rcg2_configure(rcg, &f);
}
}
return -EINVAL;
}
static int clk_byte2_set_rate_and_parent(struct clk_hw *hw,
unsigned long rate, unsigned long parent_rate, u8 index)
{
/* Read the hardware to determine parent during set_rate */
return clk_byte2_set_rate(hw, rate, parent_rate);
}
const struct clk_ops clk_byte2_ops = {
.is_enabled = clk_rcg2_is_enabled,
.get_parent = clk_rcg2_get_parent,
.set_parent = clk_rcg2_set_parent,
.recalc_rate = clk_rcg2_recalc_rate,
.set_rate = clk_byte2_set_rate,
.set_rate_and_parent = clk_byte2_set_rate_and_parent,
.determine_rate = clk_byte2_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_byte2_ops);
static const struct frac_entry frac_table_pixel[] = {
{ 3, 8 },
{ 2, 9 },
{ 4, 9 },
{ 1, 1 },
{ }
};
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
static int clk_pixel_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
unsigned long request, src_rate;
int delta = 100000;
const struct frac_entry *frac = frac_table_pixel;
for (; frac->num; frac++) {
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
request = (req->rate * frac->den) / frac->num;
src_rate = clk_hw_round_rate(req->best_parent_hw, request);
if ((src_rate < (request - delta)) ||
(src_rate > (request + delta)))
continue;
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 01:48:08 +07:00
req->best_parent_rate = src_rate;
req->rate = (src_rate * frac->num) / frac->den;
return 0;
}
return -EINVAL;
}
static int clk_pixel_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
struct freq_tbl f = { 0 };
const struct frac_entry *frac = frac_table_pixel;
unsigned long request;
int delta = 100000;
u32 mask = BIT(rcg->hid_width) - 1;
u32 hid_div, cfg;
int i, num_parents = clk_hw_get_num_parents(hw);
regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg);
cfg &= CFG_SRC_SEL_MASK;
cfg >>= CFG_SRC_SEL_SHIFT;
for (i = 0; i < num_parents; i++)
if (cfg == rcg->parent_map[i].cfg) {
f.src = rcg->parent_map[i].src;
break;
}
for (; frac->num; frac++) {
request = (rate * frac->den) / frac->num;
if ((parent_rate < (request - delta)) ||
(parent_rate > (request + delta)))
continue;
regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
&hid_div);
f.pre_div = hid_div;
f.pre_div >>= CFG_SRC_DIV_SHIFT;
f.pre_div &= mask;
f.m = frac->num;
f.n = frac->den;
return clk_rcg2_configure(rcg, &f);
}
return -EINVAL;
}
static int clk_pixel_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate, u8 index)
{
return clk_pixel_set_rate(hw, rate, parent_rate);
}
const struct clk_ops clk_pixel_ops = {
.is_enabled = clk_rcg2_is_enabled,
.get_parent = clk_rcg2_get_parent,
.set_parent = clk_rcg2_set_parent,
.recalc_rate = clk_rcg2_recalc_rate,
.set_rate = clk_pixel_set_rate,
.set_rate_and_parent = clk_pixel_set_rate_and_parent,
.determine_rate = clk_pixel_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_pixel_ops);
static int clk_gfx3d_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_rate_request parent_req = { };
struct clk_hw *p2, *p8, *p9, *xo;
unsigned long p9_rate;
int ret;
xo = clk_hw_get_parent_by_index(hw, 0);
if (req->rate == clk_hw_get_rate(xo)) {
req->best_parent_hw = xo;
return 0;
}
p9 = clk_hw_get_parent_by_index(hw, 2);
p2 = clk_hw_get_parent_by_index(hw, 3);
p8 = clk_hw_get_parent_by_index(hw, 4);
/* PLL9 is a fixed rate PLL */
p9_rate = clk_hw_get_rate(p9);
parent_req.rate = req->rate = min(req->rate, p9_rate);
if (req->rate == p9_rate) {
req->rate = req->best_parent_rate = p9_rate;
req->best_parent_hw = p9;
return 0;
}
if (req->best_parent_hw == p9) {
/* Are we going back to a previously used rate? */
if (clk_hw_get_rate(p8) == req->rate)
req->best_parent_hw = p8;
else
req->best_parent_hw = p2;
} else if (req->best_parent_hw == p8) {
req->best_parent_hw = p2;
} else {
req->best_parent_hw = p8;
}
ret = __clk_determine_rate(req->best_parent_hw, &parent_req);
if (ret)
return ret;
req->rate = req->best_parent_rate = parent_req.rate;
return 0;
}
static int clk_gfx3d_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate, u8 index)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
u32 cfg;
int ret;
/* Just mux it, we don't use the division or m/n hardware */
cfg = rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
ret = regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, cfg);
if (ret)
return ret;
return update_config(rcg);
}
static int clk_gfx3d_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
/*
* We should never get here; clk_gfx3d_determine_rate() should always
* make us use a different parent than what we're currently using, so
* clk_gfx3d_set_rate_and_parent() should always be called.
*/
return 0;
}
const struct clk_ops clk_gfx3d_ops = {
.is_enabled = clk_rcg2_is_enabled,
.get_parent = clk_rcg2_get_parent,
.set_parent = clk_rcg2_set_parent,
.recalc_rate = clk_rcg2_recalc_rate,
.set_rate = clk_gfx3d_set_rate,
.set_rate_and_parent = clk_gfx3d_set_rate_and_parent,
.determine_rate = clk_gfx3d_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_gfx3d_ops);