License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
/*
|
2015-12-28 15:35:07 +07:00
|
|
|
* Dynamic function tracing support.
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
*
|
|
|
|
|
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
|
|
|
|
|
*
|
|
|
|
|
* Thanks goes to Ingo Molnar, for suggesting the idea.
|
|
|
|
|
* Mathieu Desnoyers, for suggesting postponing the modifications.
|
|
|
|
|
* Arjan van de Ven, for keeping me straight, and explaining to me
|
|
|
|
|
* the dangers of modifying code on the run.
|
|
|
|
|
*/
|
|
|
|
|
|
2009-10-05 07:53:29 +07:00
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
|
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
#include <linux/spinlock.h>
|
|
|
|
|
#include <linux/hardirq.h>
|
2008-08-20 23:55:07 +07:00
|
|
|
#include <linux/uaccess.h>
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
#include <linux/ftrace.h>
|
|
|
|
|
#include <linux/percpu.h>
|
2008-11-11 17:57:02 +07:00
|
|
|
#include <linux/sched.h>
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
#include <linux/slab.h>
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
#include <linux/init.h>
|
|
|
|
|
#include <linux/list.h>
|
2010-11-17 04:35:16 +07:00
|
|
|
#include <linux/module.h>
|
2019-06-27 15:13:34 +07:00
|
|
|
#include <linux/memory.h>
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
|
2009-04-09 01:40:59 +07:00
|
|
|
#include <trace/syscall.h>
|
|
|
|
|
|
2017-05-09 05:58:11 +07:00
|
|
|
#include <asm/set_memory.h>
|
2012-05-04 20:26:16 +07:00
|
|
|
#include <asm/kprobes.h>
|
2008-06-22 01:17:27 +07:00
|
|
|
#include <asm/ftrace.h>
|
ftrace: use only 5 byte nops for x86
Mathieu Desnoyers revealed a bug in the original code. The nop that is
used to relpace the mcount caller can be a two part nop. This runs the
risk where a process can be preempted after executing the first nop, but
before the second part of the nop.
The ftrace code calls kstop_machine to keep multiple CPUs from executing
code that is being modified, but it does not protect against a task preempting
in the middle of a two part nop.
If the above preemption happens and the tracer is enabled, after the
kstop_machine runs, all those nops will be calls to the trace function.
If the preempted process that was preempted between the two nops is executed
again, it will execute half of the call to the trace function, and this
might crash the system.
This patch instead uses what both the latest Intel and AMD spec suggests.
That is the P6_NOP5 sequence of "0x0f 0x1f 0x44 0x00 0x00".
Note, some older CPUs and QEMU might fault on this nop, so this nop
is executed with fault handling first. If it detects a fault, it will then
use the code "0x66 0x66 0x66 0x66 0x90". If that faults, it will then
default to a simple "jmp 1f; .byte 0x00 0x00 0x00; 1:". The jmp is
not optimal but will do if the first two can not be executed.
TODO: Examine the cpuid to determine the nop to use.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15 05:05:05 +07:00
|
|
|
#include <asm/nops.h>
|
2019-05-01 20:11:17 +07:00
|
|
|
#include <asm/text-patching.h>
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
|
2008-11-11 13:03:45 +07:00
|
|
|
#ifdef CONFIG_DYNAMIC_FTRACE
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
static int ftrace_poke_late = 0;
|
|
|
|
|
|
2009-02-18 05:57:30 +07:00
|
|
|
int ftrace_arch_code_modify_prepare(void)
|
2019-06-30 04:22:33 +07:00
|
|
|
__acquires(&text_mutex)
|
2009-02-18 05:57:30 +07:00
|
|
|
{
|
2019-06-28 08:18:19 +07:00
|
|
|
/*
|
|
|
|
|
* Need to grab text_mutex to prevent a race from module loading
|
|
|
|
|
* and live kernel patching from changing the text permissions while
|
|
|
|
|
* ftrace has it set to "read/write".
|
|
|
|
|
*/
|
2019-06-27 15:13:34 +07:00
|
|
|
mutex_lock(&text_mutex);
|
2019-08-26 19:48:23 +07:00
|
|
|
ftrace_poke_late = 1;
|
2009-02-18 05:57:30 +07:00
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int ftrace_arch_code_modify_post_process(void)
|
2019-06-30 04:22:33 +07:00
|
|
|
__releases(&text_mutex)
|
2009-02-18 05:57:30 +07:00
|
|
|
{
|
2019-08-26 19:48:23 +07:00
|
|
|
/*
|
|
|
|
|
* ftrace_make_{call,nop}() may be called during
|
|
|
|
|
* module load, and we need to finish the text_poke_queue()
|
|
|
|
|
* that they do, here.
|
|
|
|
|
*/
|
|
|
|
|
text_poke_finish();
|
|
|
|
|
ftrace_poke_late = 0;
|
2019-06-27 15:13:34 +07:00
|
|
|
mutex_unlock(&text_mutex);
|
2009-02-18 05:57:30 +07:00
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
union ftrace_code_union {
|
2008-06-22 01:17:27 +07:00
|
|
|
char code[MCOUNT_INSN_SIZE];
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
struct {
|
2019-08-26 19:48:23 +07:00
|
|
|
char op;
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
int offset;
|
|
|
|
|
} __attribute__((packed));
|
|
|
|
|
};
|
|
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
static const char *ftrace_text_replace(char op, unsigned long ip, unsigned long addr)
|
2008-05-13 02:20:43 +07:00
|
|
|
{
|
|
|
|
|
static union ftrace_code_union calc;
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
calc.op = op;
|
|
|
|
|
calc.offset = (int)(addr - (ip + MCOUNT_INSN_SIZE));
|
2008-05-13 02:20:43 +07:00
|
|
|
|
|
|
|
|
return calc.code;
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
}
|
|
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
static const char *ftrace_nop_replace(void)
|
2009-10-29 09:46:57 +07:00
|
|
|
{
|
2019-08-26 19:48:23 +07:00
|
|
|
return ideal_nops[NOP_ATOMIC5];
|
2009-10-29 09:46:57 +07:00
|
|
|
}
|
|
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
static const char *ftrace_call_replace(unsigned long ip, unsigned long addr)
|
2008-10-31 03:08:32 +07:00
|
|
|
{
|
2019-08-26 19:48:23 +07:00
|
|
|
return ftrace_text_replace(CALL_INSN_OPCODE, ip, addr);
|
2008-10-31 03:08:32 +07:00
|
|
|
}
|
|
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
static int ftrace_verify_code(unsigned long ip, const char *old_code)
|
2008-11-11 13:03:45 +07:00
|
|
|
{
|
2019-08-26 19:48:23 +07:00
|
|
|
char cur_code[MCOUNT_INSN_SIZE];
|
2015-11-26 02:13:11 +07:00
|
|
|
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
/*
|
2015-12-06 09:02:58 +07:00
|
|
|
* Note:
|
|
|
|
|
* We are paranoid about modifying text, as if a bug was to happen, it
|
|
|
|
|
* could cause us to read or write to someplace that could cause harm.
|
|
|
|
|
* Carefully read and modify the code with probe_kernel_*(), and make
|
|
|
|
|
* sure what we read is what we expected it to be before modifying it.
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
*/
|
2008-10-23 20:33:00 +07:00
|
|
|
/* read the text we want to modify */
|
2019-08-26 19:48:23 +07:00
|
|
|
if (probe_kernel_read(cur_code, (void *)ip, MCOUNT_INSN_SIZE)) {
|
|
|
|
|
WARN_ON(1);
|
2008-10-23 20:32:59 +07:00
|
|
|
return -EFAULT;
|
2019-08-26 19:48:23 +07:00
|
|
|
}
|
2008-08-20 23:55:07 +07:00
|
|
|
|
2008-10-23 20:33:00 +07:00
|
|
|
/* Make sure it is what we expect it to be */
|
2019-08-26 19:48:23 +07:00
|
|
|
if (memcmp(cur_code, old_code, MCOUNT_INSN_SIZE) != 0) {
|
|
|
|
|
WARN_ON(1);
|
2008-10-23 20:32:59 +07:00
|
|
|
return -EINVAL;
|
2019-08-26 19:48:23 +07:00
|
|
|
}
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
return 0;
|
|
|
|
|
}
|
2008-08-20 23:55:07 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
static int
|
|
|
|
|
ftrace_modify_code_direct(unsigned long ip, const char *old_code,
|
|
|
|
|
const char *new_code)
|
|
|
|
|
{
|
|
|
|
|
int ret = ftrace_verify_code(ip, old_code);
|
|
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
/* replace the text with the new text */
|
|
|
|
|
if (ftrace_poke_late)
|
|
|
|
|
text_poke_queue((void *)ip, new_code, MCOUNT_INSN_SIZE, NULL);
|
|
|
|
|
else
|
|
|
|
|
text_poke_early((void *)ip, new_code, MCOUNT_INSN_SIZE);
|
2008-08-20 23:55:07 +07:00
|
|
|
return 0;
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
}
|
|
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr)
|
2008-11-15 07:21:19 +07:00
|
|
|
{
|
|
|
|
|
unsigned long ip = rec->ip;
|
2019-08-26 19:48:23 +07:00
|
|
|
const char *new, *old;
|
2008-11-15 07:21:19 +07:00
|
|
|
|
|
|
|
|
old = ftrace_call_replace(ip, addr);
|
|
|
|
|
new = ftrace_nop_replace();
|
|
|
|
|
|
2012-05-31 00:36:38 +07:00
|
|
|
/*
|
|
|
|
|
* On boot up, and when modules are loaded, the MCOUNT_ADDR
|
|
|
|
|
* is converted to a nop, and will never become MCOUNT_ADDR
|
|
|
|
|
* again. This code is either running before SMP (on boot up)
|
|
|
|
|
* or before the code will ever be executed (module load).
|
|
|
|
|
* We do not want to use the breakpoint version in this case,
|
|
|
|
|
* just modify the code directly.
|
|
|
|
|
*/
|
|
|
|
|
if (addr == MCOUNT_ADDR)
|
2019-08-26 19:48:23 +07:00
|
|
|
return ftrace_modify_code_direct(ip, old, new);
|
2015-11-26 02:13:11 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
/*
|
|
|
|
|
* x86 overrides ftrace_replace_code -- this function will never be used
|
|
|
|
|
* in this case.
|
|
|
|
|
*/
|
2012-05-31 00:36:38 +07:00
|
|
|
WARN_ONCE(1, "invalid use of ftrace_make_nop");
|
|
|
|
|
return -EINVAL;
|
2008-11-15 07:21:19 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
|
|
|
|
|
{
|
|
|
|
|
unsigned long ip = rec->ip;
|
2019-08-26 19:48:23 +07:00
|
|
|
const char *new, *old;
|
2008-11-15 07:21:19 +07:00
|
|
|
|
|
|
|
|
old = ftrace_nop_replace();
|
|
|
|
|
new = ftrace_call_replace(ip, addr);
|
|
|
|
|
|
2012-05-31 00:36:38 +07:00
|
|
|
/* Should only be called when module is loaded */
|
|
|
|
|
return ftrace_modify_code_direct(rec->ip, old, new);
|
2008-05-13 02:20:43 +07:00
|
|
|
}
|
|
|
|
|
|
2012-05-01 03:20:23 +07:00
|
|
|
/*
|
|
|
|
|
* Should never be called:
|
|
|
|
|
* As it is only called by __ftrace_replace_code() which is called by
|
|
|
|
|
* ftrace_replace_code() that x86 overrides, and by ftrace_update_code()
|
|
|
|
|
* which is called to turn mcount into nops or nops into function calls
|
|
|
|
|
* but not to convert a function from not using regs to one that uses
|
|
|
|
|
* regs, which ftrace_modify_call() is for.
|
|
|
|
|
*/
|
|
|
|
|
int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
|
|
|
|
|
unsigned long addr)
|
|
|
|
|
{
|
|
|
|
|
WARN_ON(1);
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
}
|
|
|
|
|
|
2014-02-12 08:19:44 +07:00
|
|
|
int ftrace_update_ftrace_func(ftrace_func_t func)
|
2011-08-16 20:57:10 +07:00
|
|
|
{
|
2013-10-23 19:58:16 +07:00
|
|
|
unsigned long ip;
|
2019-08-26 19:48:23 +07:00
|
|
|
const char *new;
|
2013-10-23 19:58:16 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
ip = (unsigned long)(&ftrace_call);
|
|
|
|
|
new = ftrace_call_replace(ip, (unsigned long)func);
|
|
|
|
|
text_poke_bp((void *)ip, new, MCOUNT_INSN_SIZE, NULL);
|
2011-08-16 20:57:10 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
ip = (unsigned long)(&ftrace_regs_call);
|
|
|
|
|
new = ftrace_call_replace(ip, (unsigned long)func);
|
|
|
|
|
text_poke_bp((void *)ip, new, MCOUNT_INSN_SIZE, NULL);
|
2011-08-16 20:57:10 +07:00
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2012-04-27 20:13:18 +07:00
|
|
|
void ftrace_replace_code(int enable)
|
2011-08-16 20:57:10 +07:00
|
|
|
{
|
|
|
|
|
struct ftrace_rec_iter *iter;
|
|
|
|
|
struct dyn_ftrace *rec;
|
2019-08-26 19:48:23 +07:00
|
|
|
const char *new, *old;
|
2011-08-16 20:57:10 +07:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
for_ftrace_rec_iter(iter) {
|
|
|
|
|
rec = ftrace_rec_iter_record(iter);
|
|
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
switch (ftrace_test_record(rec, enable)) {
|
|
|
|
|
case FTRACE_UPDATE_IGNORE:
|
|
|
|
|
default:
|
|
|
|
|
continue;
|
2011-08-16 20:57:10 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
case FTRACE_UPDATE_MAKE_CALL:
|
|
|
|
|
old = ftrace_nop_replace();
|
|
|
|
|
break;
|
2011-08-16 20:57:10 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
case FTRACE_UPDATE_MODIFY_CALL:
|
|
|
|
|
case FTRACE_UPDATE_MAKE_NOP:
|
|
|
|
|
old = ftrace_call_replace(rec->ip, ftrace_get_addr_curr(rec));
|
|
|
|
|
break;
|
|
|
|
|
}
|
2011-08-16 20:57:10 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
ret = ftrace_verify_code(rec->ip, old);
|
|
|
|
|
if (ret) {
|
|
|
|
|
ftrace_bug(ret, rec);
|
|
|
|
|
return;
|
|
|
|
|
}
|
2011-08-16 20:57:10 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for_ftrace_rec_iter(iter) {
|
|
|
|
|
rec = ftrace_rec_iter_record(iter);
|
|
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
switch (ftrace_test_record(rec, enable)) {
|
|
|
|
|
case FTRACE_UPDATE_IGNORE:
|
|
|
|
|
default:
|
|
|
|
|
continue;
|
2011-08-16 20:57:10 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
case FTRACE_UPDATE_MAKE_CALL:
|
|
|
|
|
case FTRACE_UPDATE_MODIFY_CALL:
|
|
|
|
|
new = ftrace_call_replace(rec->ip, ftrace_get_addr_new(rec));
|
|
|
|
|
break;
|
2011-08-16 20:57:10 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
case FTRACE_UPDATE_MAKE_NOP:
|
|
|
|
|
new = ftrace_nop_replace();
|
|
|
|
|
break;
|
|
|
|
|
}
|
2011-08-16 20:57:10 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
text_poke_queue((void *)rec->ip, new, MCOUNT_INSN_SIZE, NULL);
|
|
|
|
|
ftrace_update_record(rec, enable);
|
2011-08-16 20:57:10 +07:00
|
|
|
}
|
2019-08-26 19:48:23 +07:00
|
|
|
text_poke_finish();
|
2012-05-31 00:36:38 +07:00
|
|
|
}
|
|
|
|
|
|
2011-08-16 20:57:10 +07:00
|
|
|
void arch_ftrace_update_code(int command)
|
|
|
|
|
{
|
2012-04-27 20:13:18 +07:00
|
|
|
ftrace_modify_all_code(command);
|
2011-08-16 20:57:10 +07:00
|
|
|
}
|
|
|
|
|
|
2014-02-25 01:59:59 +07:00
|
|
|
int __init ftrace_dyn_arch_init(void)
|
ftrace: dynamic enabling/disabling of function calls
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
2008-11-26 12:16:24 +07:00
|
|
|
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
/* Currently only x86_64 supports dynamic trampolines */
|
|
|
|
|
#ifdef CONFIG_X86_64
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_MODULES
|
|
|
|
|
#include <linux/moduleloader.h>
|
|
|
|
|
/* Module allocation simplifies allocating memory for code */
|
|
|
|
|
static inline void *alloc_tramp(unsigned long size)
|
|
|
|
|
{
|
|
|
|
|
return module_alloc(size);
|
|
|
|
|
}
|
2019-04-26 07:11:39 +07:00
|
|
|
static inline void tramp_free(void *tramp)
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
{
|
2015-01-20 05:37:05 +07:00
|
|
|
module_memfree(tramp);
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
}
|
|
|
|
|
#else
|
|
|
|
|
/* Trampolines can only be created if modules are supported */
|
|
|
|
|
static inline void *alloc_tramp(unsigned long size)
|
|
|
|
|
{
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
2019-04-26 07:11:39 +07:00
|
|
|
static inline void tramp_free(void *tramp) { }
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Defined as markers to the end of the ftrace default trampolines */
|
|
|
|
|
extern void ftrace_regs_caller_end(void);
|
2016-02-16 15:43:21 +07:00
|
|
|
extern void ftrace_epilogue(void);
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
extern void ftrace_caller_op_ptr(void);
|
|
|
|
|
extern void ftrace_regs_caller_op_ptr(void);
|
|
|
|
|
|
|
|
|
|
/* movq function_trace_op(%rip), %rdx */
|
|
|
|
|
/* 0x48 0x8b 0x15 <offset-to-ftrace_trace_op (4 bytes)> */
|
|
|
|
|
#define OP_REF_SIZE 7
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The ftrace_ops is passed to the function callback. Since the
|
|
|
|
|
* trampoline only services a single ftrace_ops, we can pass in
|
|
|
|
|
* that ops directly.
|
|
|
|
|
*
|
|
|
|
|
* The ftrace_op_code_union is used to create a pointer to the
|
|
|
|
|
* ftrace_ops that will be passed to the callback function.
|
|
|
|
|
*/
|
|
|
|
|
union ftrace_op_code_union {
|
|
|
|
|
char code[OP_REF_SIZE];
|
|
|
|
|
struct {
|
|
|
|
|
char op[3];
|
|
|
|
|
int offset;
|
|
|
|
|
} __attribute__((packed));
|
|
|
|
|
};
|
|
|
|
|
|
2018-12-09 00:58:51 +07:00
|
|
|
#define RET_SIZE 1
|
|
|
|
|
|
2014-11-19 09:14:11 +07:00
|
|
|
static unsigned long
|
|
|
|
|
create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
{
|
|
|
|
|
unsigned long start_offset;
|
|
|
|
|
unsigned long end_offset;
|
|
|
|
|
unsigned long op_offset;
|
2019-08-26 19:48:23 +07:00
|
|
|
unsigned long call_offset;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
unsigned long offset;
|
2019-04-26 07:11:29 +07:00
|
|
|
unsigned long npages;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
unsigned long size;
|
2018-12-09 00:58:51 +07:00
|
|
|
unsigned long retq;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
unsigned long *ptr;
|
|
|
|
|
void *trampoline;
|
2018-12-09 00:58:51 +07:00
|
|
|
void *ip;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
/* 48 8b 15 <offset> is movq <offset>(%rip), %rdx */
|
|
|
|
|
unsigned const char op_ref[] = { 0x48, 0x8b, 0x15 };
|
|
|
|
|
union ftrace_op_code_union op_ptr;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
if (ops->flags & FTRACE_OPS_FL_SAVE_REGS) {
|
|
|
|
|
start_offset = (unsigned long)ftrace_regs_caller;
|
|
|
|
|
end_offset = (unsigned long)ftrace_regs_caller_end;
|
|
|
|
|
op_offset = (unsigned long)ftrace_regs_caller_op_ptr;
|
2019-08-26 19:48:23 +07:00
|
|
|
call_offset = (unsigned long)ftrace_regs_call;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
} else {
|
|
|
|
|
start_offset = (unsigned long)ftrace_caller;
|
2016-02-16 15:43:21 +07:00
|
|
|
end_offset = (unsigned long)ftrace_epilogue;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
op_offset = (unsigned long)ftrace_caller_op_ptr;
|
2019-08-26 19:48:23 +07:00
|
|
|
call_offset = (unsigned long)ftrace_call;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
size = end_offset - start_offset;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Allocate enough size to store the ftrace_caller code,
|
2018-12-09 00:58:51 +07:00
|
|
|
* the iret , as well as the address of the ftrace_ops this
|
|
|
|
|
* trampoline is used for.
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
*/
|
2018-12-09 00:58:51 +07:00
|
|
|
trampoline = alloc_tramp(size + RET_SIZE + sizeof(void *));
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
if (!trampoline)
|
|
|
|
|
return 0;
|
|
|
|
|
|
2018-12-09 00:58:51 +07:00
|
|
|
*tramp_size = size + RET_SIZE + sizeof(void *);
|
2019-04-26 07:11:29 +07:00
|
|
|
npages = DIV_ROUND_UP(*tramp_size, PAGE_SIZE);
|
2014-11-19 09:14:11 +07:00
|
|
|
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
/* Copy ftrace_caller onto the trampoline memory */
|
|
|
|
|
ret = probe_kernel_read(trampoline, (void *)start_offset, size);
|
2018-12-09 00:58:51 +07:00
|
|
|
if (WARN_ON(ret < 0))
|
|
|
|
|
goto fail;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
|
2018-12-09 00:58:51 +07:00
|
|
|
ip = trampoline + size;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
|
2018-12-09 00:58:51 +07:00
|
|
|
/* The trampoline ends with ret(q) */
|
|
|
|
|
retq = (unsigned long)ftrace_stub;
|
|
|
|
|
ret = probe_kernel_read(ip, (void *)retq, RET_SIZE);
|
|
|
|
|
if (WARN_ON(ret < 0))
|
|
|
|
|
goto fail;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The address of the ftrace_ops that is used for this trampoline
|
|
|
|
|
* is stored at the end of the trampoline. This will be used to
|
|
|
|
|
* load the third parameter for the callback. Basically, that
|
|
|
|
|
* location at the end of the trampoline takes the place of
|
|
|
|
|
* the global function_trace_op variable.
|
|
|
|
|
*/
|
|
|
|
|
|
2018-12-09 00:58:51 +07:00
|
|
|
ptr = (unsigned long *)(trampoline + size + RET_SIZE);
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
*ptr = (unsigned long)ops;
|
|
|
|
|
|
|
|
|
|
op_offset -= start_offset;
|
|
|
|
|
memcpy(&op_ptr, trampoline + op_offset, OP_REF_SIZE);
|
|
|
|
|
|
|
|
|
|
/* Are we pointing to the reference? */
|
2018-12-09 00:58:51 +07:00
|
|
|
if (WARN_ON(memcmp(op_ptr.op, op_ref, 3) != 0))
|
|
|
|
|
goto fail;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
|
|
|
|
|
/* Load the contents of ptr into the callback parameter */
|
|
|
|
|
offset = (unsigned long)ptr;
|
|
|
|
|
offset -= (unsigned long)trampoline + op_offset + OP_REF_SIZE;
|
|
|
|
|
|
|
|
|
|
op_ptr.offset = offset;
|
|
|
|
|
|
|
|
|
|
/* put in the new offset to the ftrace_ops */
|
|
|
|
|
memcpy(trampoline + op_offset, &op_ptr, OP_REF_SIZE);
|
|
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
/* put in the call to the function */
|
|
|
|
|
mutex_lock(&text_mutex);
|
|
|
|
|
call_offset -= start_offset;
|
|
|
|
|
memcpy(trampoline + call_offset,
|
|
|
|
|
text_gen_insn(CALL_INSN_OPCODE,
|
|
|
|
|
trampoline + call_offset,
|
|
|
|
|
ftrace_ops_get_func(ops)), CALL_INSN_SIZE);
|
|
|
|
|
mutex_unlock(&text_mutex);
|
|
|
|
|
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
/* ALLOC_TRAMP flags lets us know we created it */
|
|
|
|
|
ops->flags |= FTRACE_OPS_FL_ALLOC_TRAMP;
|
|
|
|
|
|
2019-04-26 07:11:39 +07:00
|
|
|
set_vm_flush_reset_perms(trampoline);
|
|
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
set_memory_ro((unsigned long)trampoline, npages);
|
2019-04-26 07:11:29 +07:00
|
|
|
set_memory_x((unsigned long)trampoline, npages);
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
return (unsigned long)trampoline;
|
2018-12-09 00:58:51 +07:00
|
|
|
fail:
|
2019-04-26 07:11:39 +07:00
|
|
|
tramp_free(trampoline);
|
2018-12-09 00:58:51 +07:00
|
|
|
return 0;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
}
|
|
|
|
|
|
2014-07-04 01:51:36 +07:00
|
|
|
static unsigned long calc_trampoline_call_offset(bool save_regs)
|
|
|
|
|
{
|
|
|
|
|
unsigned long start_offset;
|
|
|
|
|
unsigned long call_offset;
|
|
|
|
|
|
|
|
|
|
if (save_regs) {
|
|
|
|
|
start_offset = (unsigned long)ftrace_regs_caller;
|
|
|
|
|
call_offset = (unsigned long)ftrace_regs_call;
|
|
|
|
|
} else {
|
|
|
|
|
start_offset = (unsigned long)ftrace_caller;
|
|
|
|
|
call_offset = (unsigned long)ftrace_call;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return call_offset - start_offset;
|
|
|
|
|
}
|
|
|
|
|
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
void arch_ftrace_update_trampoline(struct ftrace_ops *ops)
|
|
|
|
|
{
|
|
|
|
|
ftrace_func_t func;
|
|
|
|
|
unsigned long offset;
|
|
|
|
|
unsigned long ip;
|
2014-11-19 09:14:11 +07:00
|
|
|
unsigned int size;
|
2019-08-26 19:48:23 +07:00
|
|
|
const char *new;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
if (!ops->trampoline) {
|
2014-11-19 09:14:11 +07:00
|
|
|
ops->trampoline = create_trampoline(ops, &size);
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
if (!ops->trampoline)
|
|
|
|
|
return;
|
2014-11-19 09:14:11 +07:00
|
|
|
ops->trampoline_size = size;
|
2019-08-26 19:48:23 +07:00
|
|
|
return;
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
}
|
|
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
/*
|
|
|
|
|
* The ftrace_ops caller may set up its own trampoline.
|
|
|
|
|
* In such a case, this code must not modify it.
|
|
|
|
|
*/
|
|
|
|
|
if (!(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
|
|
|
|
|
return;
|
|
|
|
|
|
2014-07-04 01:51:36 +07:00
|
|
|
offset = calc_trampoline_call_offset(ops->flags & FTRACE_OPS_FL_SAVE_REGS);
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
ip = ops->trampoline + offset;
|
|
|
|
|
func = ftrace_ops_get_func(ops);
|
|
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
mutex_lock(&text_mutex);
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
/* Do a safe modify in case the trampoline is executing */
|
|
|
|
|
new = ftrace_call_replace(ip, (unsigned long)func);
|
2019-08-26 19:48:23 +07:00
|
|
|
text_poke_bp((void *)ip, new, MCOUNT_INSN_SIZE, NULL);
|
|
|
|
|
mutex_unlock(&text_mutex);
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
}
|
2014-07-04 01:51:36 +07:00
|
|
|
|
|
|
|
|
/* Return the address of the function the trampoline calls */
|
|
|
|
|
static void *addr_from_call(void *ptr)
|
|
|
|
|
{
|
|
|
|
|
union ftrace_code_union calc;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
ret = probe_kernel_read(&calc, ptr, MCOUNT_INSN_SIZE);
|
|
|
|
|
if (WARN_ON_ONCE(ret < 0))
|
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
|
|
/* Make sure this is a call */
|
2019-03-05 04:35:22 +07:00
|
|
|
if (WARN_ON_ONCE(calc.op != 0xe8)) {
|
|
|
|
|
pr_warn("Expected e8, got %x\n", calc.op);
|
2014-07-04 01:51:36 +07:00
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return ptr + MCOUNT_INSN_SIZE + calc.offset;
|
|
|
|
|
}
|
|
|
|
|
|
2014-11-25 09:00:34 +07:00
|
|
|
void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
|
2014-07-04 01:51:36 +07:00
|
|
|
unsigned long frame_pointer);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If the ops->trampoline was not allocated, then it probably
|
|
|
|
|
* has a static trampoline func, or is the ftrace caller itself.
|
|
|
|
|
*/
|
|
|
|
|
static void *static_tramp_func(struct ftrace_ops *ops, struct dyn_ftrace *rec)
|
|
|
|
|
{
|
|
|
|
|
unsigned long offset;
|
|
|
|
|
bool save_regs = rec->flags & FTRACE_FL_REGS_EN;
|
|
|
|
|
void *ptr;
|
|
|
|
|
|
|
|
|
|
if (ops && ops->trampoline) {
|
|
|
|
|
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
|
|
|
|
|
/*
|
|
|
|
|
* We only know about function graph tracer setting as static
|
|
|
|
|
* trampoline.
|
|
|
|
|
*/
|
|
|
|
|
if (ops->trampoline == FTRACE_GRAPH_ADDR)
|
|
|
|
|
return (void *)prepare_ftrace_return;
|
|
|
|
|
#endif
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
offset = calc_trampoline_call_offset(save_regs);
|
|
|
|
|
|
|
|
|
|
if (save_regs)
|
|
|
|
|
ptr = (void *)FTRACE_REGS_ADDR + offset;
|
|
|
|
|
else
|
|
|
|
|
ptr = (void *)FTRACE_ADDR + offset;
|
|
|
|
|
|
|
|
|
|
return addr_from_call(ptr);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void *arch_ftrace_trampoline_func(struct ftrace_ops *ops, struct dyn_ftrace *rec)
|
|
|
|
|
{
|
|
|
|
|
unsigned long offset;
|
|
|
|
|
|
|
|
|
|
/* If we didn't allocate this trampoline, consider it static */
|
|
|
|
|
if (!ops || !(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
|
|
|
|
|
return static_tramp_func(ops, rec);
|
|
|
|
|
|
|
|
|
|
offset = calc_trampoline_call_offset(ops->flags & FTRACE_OPS_FL_SAVE_REGS);
|
|
|
|
|
return addr_from_call((void *)ops->trampoline + offset);
|
|
|
|
|
}
|
|
|
|
|
|
2014-07-04 02:48:16 +07:00
|
|
|
void arch_ftrace_trampoline_free(struct ftrace_ops *ops)
|
|
|
|
|
{
|
|
|
|
|
if (!ops || !(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
|
|
|
|
|
return;
|
|
|
|
|
|
2019-04-26 07:11:39 +07:00
|
|
|
tramp_free((void *)ops->trampoline);
|
2014-07-04 02:48:16 +07:00
|
|
|
ops->trampoline = 0;
|
|
|
|
|
}
|
2014-07-04 01:51:36 +07:00
|
|
|
|
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 10:23:31 +07:00
|
|
|
#endif /* CONFIG_X86_64 */
|
|
|
|
|
#endif /* CONFIG_DYNAMIC_FTRACE */
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_DYNAMIC_FTRACE
|
|
|
|
|
extern void ftrace_graph_call(void);
|
2008-11-26 12:16:24 +07:00
|
|
|
|
2019-08-26 19:48:23 +07:00
|
|
|
static const char *ftrace_jmp_replace(unsigned long ip, unsigned long addr)
|
2019-03-05 04:35:22 +07:00
|
|
|
{
|
2019-08-26 19:48:23 +07:00
|
|
|
return ftrace_text_replace(JMP32_INSN_OPCODE, ip, addr);
|
2019-03-05 04:35:22 +07:00
|
|
|
}
|
|
|
|
|
|
2014-02-12 08:19:44 +07:00
|
|
|
static int ftrace_mod_jmp(unsigned long ip, void *func)
|
|
|
|
|
{
|
2019-08-26 19:48:23 +07:00
|
|
|
const char *new;
|
2008-11-26 12:16:24 +07:00
|
|
|
|
2014-02-12 08:19:44 +07:00
|
|
|
new = ftrace_jmp_replace(ip, (unsigned long)func);
|
2019-08-26 19:48:23 +07:00
|
|
|
text_poke_bp((void *)ip, new, MCOUNT_INSN_SIZE, NULL);
|
|
|
|
|
return 0;
|
2008-11-26 12:16:24 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int ftrace_enable_ftrace_graph_caller(void)
|
|
|
|
|
{
|
|
|
|
|
unsigned long ip = (unsigned long)(&ftrace_graph_call);
|
|
|
|
|
|
2014-02-12 08:19:44 +07:00
|
|
|
return ftrace_mod_jmp(ip, &ftrace_graph_caller);
|
2008-11-26 12:16:24 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int ftrace_disable_ftrace_graph_caller(void)
|
|
|
|
|
{
|
|
|
|
|
unsigned long ip = (unsigned long)(&ftrace_graph_call);
|
|
|
|
|
|
2014-02-12 08:19:44 +07:00
|
|
|
return ftrace_mod_jmp(ip, &ftrace_stub);
|
2008-11-26 12:16:24 +07:00
|
|
|
}
|
|
|
|
|
|
2008-11-16 12:02:06 +07:00
|
|
|
#endif /* !CONFIG_DYNAMIC_FTRACE */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Hook the return address and push it in the stack of return addrs
|
|
|
|
|
* in current thread info.
|
|
|
|
|
*/
|
2014-11-25 09:00:34 +07:00
|
|
|
void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
|
function-graph: add stack frame test
In case gcc does something funny with the stack frames, or the return
from function code, we would like to detect that.
An arch may implement passing of a variable that is unique to the
function and can be saved on entering a function and can be tested
when exiting the function. Usually the frame pointer can be used for
this purpose.
This patch also implements this for x86. Where it passes in the stack
frame of the parent function, and will test that frame on exit.
There was a case in x86_32 with optimize for size (-Os) where, for a
few functions, gcc would align the stack frame and place a copy of the
return address into it. The function graph tracer modified the copy and
not the actual return address. On return from the funtion, it did not go
to the tracer hook, but returned to the parent. This broke the function
graph tracer, because the return of the parent (where gcc did not do
this funky manipulation) returned to the location that the child function
was suppose to. This caused strange kernel crashes.
This test detected the problem and pointed out where the issue was.
This modifies the parameters of one of the functions that the arch
specific code calls, so it includes changes to arch code to accommodate
the new prototype.
Note, I notice that the parsic arch implements its own push_return_trace.
This is now a generic function and the ftrace_push_return_trace should be
used instead. This patch does not touch that code.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-18 23:45:08 +07:00
|
|
|
unsigned long frame_pointer)
|
2008-11-16 12:02:06 +07:00
|
|
|
{
|
2019-08-26 19:48:23 +07:00
|
|
|
unsigned long return_hooker = (unsigned long)&return_to_handler;
|
2008-11-16 12:02:06 +07:00
|
|
|
unsigned long old;
|
|
|
|
|
int faulted;
|
|
|
|
|
|
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
On x86-32, with CONFIG_FIRMWARE and multiple CPUs, if you enable function
graph tracing and then suspend to RAM, it will triple fault and reboot when
it resumes.
The first fault happens when booting a secondary CPU:
startup_32_smp()
load_ucode_ap()
prepare_ftrace_return()
ftrace_graph_is_dead()
(accesses 'kill_ftrace_graph')
The early head_32.S code calls into load_ucode_ap(), which has an an
ftrace hook, so it calls prepare_ftrace_return(), which calls
ftrace_graph_is_dead(), which tries to access the global
'kill_ftrace_graph' variable with a virtual address, causing a fault
because the CPU is still in real mode.
The fix is to add a check in prepare_ftrace_return() to make sure it's
running in protected mode before continuing. The check makes sure the
stack pointer is a virtual kernel address. It's a bit of a hack, but
it's not very intrusive and it works well enough.
For reference, here are a few other (more difficult) ways this could
have potentially been fixed:
- Move startup_32_smp()'s call to load_ucode_ap() down to *after* paging
is enabled. (No idea what that would break.)
- Track down load_ucode_ap()'s entire callee tree and mark all the
functions 'notrace'. (Probably not realistic.)
- Pause graph tracing in ftrace_suspend_notifier_call() or bringup_cpu()
or __cpu_up(), and ensure that the pause facility can be queried from
real mode.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>
Cc: linux-acpi@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: stable@kernel.org
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/5c1272269a580660703ed2eccf44308e790c7a98.1492123841.git.jpoimboe@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-14 05:53:55 +07:00
|
|
|
/*
|
|
|
|
|
* When resuming from suspend-to-ram, this function can be indirectly
|
|
|
|
|
* called from early CPU startup code while the CPU is in real mode,
|
|
|
|
|
* which would fail miserably. Make sure the stack pointer is a
|
|
|
|
|
* virtual address.
|
|
|
|
|
*
|
|
|
|
|
* This check isn't as accurate as virt_addr_valid(), but it should be
|
|
|
|
|
* good enough for this purpose, and it's fast.
|
|
|
|
|
*/
|
|
|
|
|
if (unlikely((long)__builtin_frame_address(0) >= 0))
|
|
|
|
|
return;
|
|
|
|
|
|
2014-06-25 21:35:14 +07:00
|
|
|
if (unlikely(ftrace_graph_is_dead()))
|
|
|
|
|
return;
|
|
|
|
|
|
2008-12-06 09:43:41 +07:00
|
|
|
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
|
2008-11-16 12:02:06 +07:00
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Protect against fault, even if it shouldn't
|
|
|
|
|
* happen. This tool is too much intrusive to
|
|
|
|
|
* ignore such a protection.
|
|
|
|
|
*/
|
|
|
|
|
asm volatile(
|
2009-02-10 23:53:23 +07:00
|
|
|
"1: " _ASM_MOV " (%[parent]), %[old]\n"
|
|
|
|
|
"2: " _ASM_MOV " %[return_hooker], (%[parent])\n"
|
2008-11-16 12:02:06 +07:00
|
|
|
" movl $0, %[faulted]\n"
|
2009-02-11 01:07:13 +07:00
|
|
|
"3:\n"
|
2008-11-16 12:02:06 +07:00
|
|
|
|
|
|
|
|
".section .fixup, \"ax\"\n"
|
2009-02-11 01:07:13 +07:00
|
|
|
"4: movl $1, %[faulted]\n"
|
|
|
|
|
" jmp 3b\n"
|
2008-11-16 12:02:06 +07:00
|
|
|
".previous\n"
|
|
|
|
|
|
2009-02-11 01:07:13 +07:00
|
|
|
_ASM_EXTABLE(1b, 4b)
|
|
|
|
|
_ASM_EXTABLE(2b, 4b)
|
2008-11-16 12:02:06 +07:00
|
|
|
|
2009-05-14 00:52:19 +07:00
|
|
|
: [old] "=&r" (old), [faulted] "=r" (faulted)
|
2009-02-10 23:53:23 +07:00
|
|
|
: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
|
2008-11-16 12:02:06 +07:00
|
|
|
: "memory"
|
|
|
|
|
);
|
|
|
|
|
|
2008-12-03 11:50:02 +07:00
|
|
|
if (unlikely(faulted)) {
|
|
|
|
|
ftrace_graph_stop();
|
|
|
|
|
WARN_ON(1);
|
2008-11-16 12:02:06 +07:00
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
2018-11-19 05:14:10 +07:00
|
|
|
if (function_graph_enter(old, self_addr, frame_pointer, parent))
|
2008-12-03 11:50:05 +07:00
|
|
|
*parent = old;
|
2008-11-16 12:02:06 +07:00
|
|
|
}
|
2008-11-26 03:07:04 +07:00
|
|
|
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
|