linux_dsm_epyc7002/arch/alpha/mm/init.c

302 lines
7.8 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/alpha/mm/init.c
*
* Copyright (C) 1995 Linus Torvalds
*/
/* 2.3.x zone allocator, 1999 Andrea Arcangeli <andrea@suse.de> */
#include <linux/pagemap.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/init.h>
#include <linux/bootmem.h> /* max_low_pfn */
#include <linux/vmalloc.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/gfp.h>
#include <linux/uaccess.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/hwrpb.h>
#include <asm/dma.h>
#include <asm/mmu_context.h>
#include <asm/console.h>
#include <asm/tlb.h>
#include <asm/setup.h>
#include <asm/sections.h>
extern void die_if_kernel(char *,struct pt_regs *,long);
static struct pcb_struct original_pcb;
pgd_t *
pgd_alloc(struct mm_struct *mm)
{
pgd_t *ret, *init;
ret = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
init = pgd_offset(&init_mm, 0UL);
if (ret) {
#ifdef CONFIG_ALPHA_LARGE_VMALLOC
memcpy (ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD,
(PTRS_PER_PGD - USER_PTRS_PER_PGD - 1)*sizeof(pgd_t));
#else
pgd_val(ret[PTRS_PER_PGD-2]) = pgd_val(init[PTRS_PER_PGD-2]);
#endif
/* The last PGD entry is the VPTB self-map. */
pgd_val(ret[PTRS_PER_PGD-1])
= pte_val(mk_pte(virt_to_page(ret), PAGE_KERNEL));
}
return ret;
}
/*
* BAD_PAGE is the page that is used for page faults when linux
* is out-of-memory. Older versions of linux just did a
* do_exit(), but using this instead means there is less risk
* for a process dying in kernel mode, possibly leaving an inode
* unused etc..
*
* BAD_PAGETABLE is the accompanying page-table: it is initialized
* to point to BAD_PAGE entries.
*
* ZERO_PAGE is a special page that is used for zero-initialized
* data and COW.
*/
pmd_t *
__bad_pagetable(void)
{
memset((void *) EMPTY_PGT, 0, PAGE_SIZE);
return (pmd_t *) EMPTY_PGT;
}
pte_t
__bad_page(void)
{
memset((void *) EMPTY_PGE, 0, PAGE_SIZE);
return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
}
static inline unsigned long
load_PCB(struct pcb_struct *pcb)
{
register unsigned long sp __asm__("$30");
pcb->ksp = sp;
return __reload_thread(pcb);
}
/* Set up initial PCB, VPTB, and other such nicities. */
static inline void
switch_to_system_map(void)
{
unsigned long newptbr;
unsigned long original_pcb_ptr;
/* Initialize the kernel's page tables. Linux puts the vptb in
the last slot of the L1 page table. */
memset(swapper_pg_dir, 0, PAGE_SIZE);
newptbr = ((unsigned long) swapper_pg_dir - PAGE_OFFSET) >> PAGE_SHIFT;
pgd_val(swapper_pg_dir[1023]) =
(newptbr << 32) | pgprot_val(PAGE_KERNEL);
/* Set the vptb. This is often done by the bootloader, but
shouldn't be required. */
if (hwrpb->vptb != 0xfffffffe00000000UL) {
wrvptptr(0xfffffffe00000000UL);
hwrpb->vptb = 0xfffffffe00000000UL;
hwrpb_update_checksum(hwrpb);
}
/* Also set up the real kernel PCB while we're at it. */
init_thread_info.pcb.ptbr = newptbr;
init_thread_info.pcb.flags = 1; /* set FEN, clear everything else */
original_pcb_ptr = load_PCB(&init_thread_info.pcb);
tbia();
/* Save off the contents of the original PCB so that we can
restore the original console's page tables for a clean reboot.
Note that the PCB is supposed to be a physical address, but
since KSEG values also happen to work, folks get confused.
Check this here. */
if (original_pcb_ptr < PAGE_OFFSET) {
original_pcb_ptr = (unsigned long)
phys_to_virt(original_pcb_ptr);
}
original_pcb = *(struct pcb_struct *) original_pcb_ptr;
}
int callback_init_done;
void * __init
callback_init(void * kernel_end)
{
struct crb_struct * crb;
pgd_t *pgd;
pmd_t *pmd;
void *two_pages;
/* Starting at the HWRPB, locate the CRB. */
crb = (struct crb_struct *)((char *)hwrpb + hwrpb->crb_offset);
if (alpha_using_srm) {
/* Tell the console whither it is to be remapped. */
if (srm_fixup(VMALLOC_START, (unsigned long)hwrpb))
__halt(); /* "We're boned." --Bender */
/* Edit the procedure descriptors for DISPATCH and FIXUP. */
crb->dispatch_va = (struct procdesc_struct *)
(VMALLOC_START + (unsigned long)crb->dispatch_va
- crb->map[0].va);
crb->fixup_va = (struct procdesc_struct *)
(VMALLOC_START + (unsigned long)crb->fixup_va
- crb->map[0].va);
}
switch_to_system_map();
/* Allocate one PGD and one PMD. In the case of SRM, we'll need
these to actually remap the console. There is an assumption
here that only one of each is needed, and this allows for 8MB.
On systems with larger consoles, additional pages will be
allocated as needed during the mapping process.
In the case of not SRM, but not CONFIG_ALPHA_LARGE_VMALLOC,
we need to allocate the PGD we use for vmalloc before we start
forking other tasks. */
two_pages = (void *)
(((unsigned long)kernel_end + ~PAGE_MASK) & PAGE_MASK);
kernel_end = two_pages + 2*PAGE_SIZE;
memset(two_pages, 0, 2*PAGE_SIZE);
pgd = pgd_offset_k(VMALLOC_START);
pgd_set(pgd, (pmd_t *)two_pages);
pmd = pmd_offset(pgd, VMALLOC_START);
pmd_set(pmd, (pte_t *)(two_pages + PAGE_SIZE));
if (alpha_using_srm) {
static struct vm_struct console_remap_vm;
unsigned long nr_pages = 0;
unsigned long vaddr;
unsigned long i, j;
/* calculate needed size */
for (i = 0; i < crb->map_entries; ++i)
nr_pages += crb->map[i].count;
/* register the vm area */
console_remap_vm.flags = VM_ALLOC;
console_remap_vm.size = nr_pages << PAGE_SHIFT;
vm_area_register_early(&console_remap_vm, PAGE_SIZE);
vaddr = (unsigned long)console_remap_vm.addr;
/* Set up the third level PTEs and update the virtual
addresses of the CRB entries. */
for (i = 0; i < crb->map_entries; ++i) {
unsigned long pfn = crb->map[i].pa >> PAGE_SHIFT;
crb->map[i].va = vaddr;
for (j = 0; j < crb->map[i].count; ++j) {
/* Newer consoles (especially on larger
systems) may require more pages of
PTEs. Grab additional pages as needed. */
if (pmd != pmd_offset(pgd, vaddr)) {
memset(kernel_end, 0, PAGE_SIZE);
pmd = pmd_offset(pgd, vaddr);
pmd_set(pmd, (pte_t *)kernel_end);
kernel_end += PAGE_SIZE;
}
set_pte(pte_offset_kernel(pmd, vaddr),
pfn_pte(pfn, PAGE_KERNEL));
pfn++;
vaddr += PAGE_SIZE;
}
}
}
callback_init_done = 1;
return kernel_end;
}
#ifndef CONFIG_DISCONTIGMEM
/*
* paging_init() sets up the memory map.
*/
void __init paging_init(void)
{
unsigned long zones_size[MAX_NR_ZONES] = {0, };
unsigned long dma_pfn, high_pfn;
dma_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
high_pfn = max_pfn = max_low_pfn;
if (dma_pfn >= high_pfn)
zones_size[ZONE_DMA] = high_pfn;
else {
zones_size[ZONE_DMA] = dma_pfn;
zones_size[ZONE_NORMAL] = high_pfn - dma_pfn;
}
/* Initialize mem_map[]. */
free_area_init(zones_size);
/* Initialize the kernel's ZERO_PGE. */
memset((void *)ZERO_PGE, 0, PAGE_SIZE);
}
#endif /* CONFIG_DISCONTIGMEM */
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
void
srm_paging_stop (void)
{
/* Move the vptb back to where the SRM console expects it. */
swapper_pg_dir[1] = swapper_pg_dir[1023];
tbia();
wrvptptr(0x200000000UL);
hwrpb->vptb = 0x200000000UL;
hwrpb_update_checksum(hwrpb);
/* Reload the page tables that the console had in use. */
load_PCB(&original_pcb);
tbia();
}
#endif
void __init
mem_init(void)
{
set_max_mapnr(max_low_pfn);
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
free_all_bootmem();
mem_init_print_info(NULL);
}
void
free_initmem(void)
{
mm: enhance free_reserved_area() to support poisoning memory with zero Address more review comments from last round of code review. 1) Enhance free_reserved_area() to support poisoning freed memory with pattern '0'. This could be used to get rid of poison_init_mem() on ARM64. 2) A previous patch has disabled memory poison for initmem on s390 by mistake, so restore to the original behavior. 3) Remove redundant PAGE_ALIGN() when calling free_reserved_area(). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: <sworddragon2@aol.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Michel Lespinasse <walken@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:02:51 +07:00
free_initmem_default(-1);
}
#ifdef CONFIG_BLK_DEV_INITRD
void
free_initrd_mem(unsigned long start, unsigned long end)
{
mm: enhance free_reserved_area() to support poisoning memory with zero Address more review comments from last round of code review. 1) Enhance free_reserved_area() to support poisoning freed memory with pattern '0'. This could be used to get rid of poison_init_mem() on ARM64. 2) A previous patch has disabled memory poison for initmem on s390 by mistake, so restore to the original behavior. 3) Remove redundant PAGE_ALIGN() when calling free_reserved_area(). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: <sworddragon2@aol.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Michel Lespinasse <walken@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:02:51 +07:00
free_reserved_area((void *)start, (void *)end, -1, "initrd");
}
#endif