linux_dsm_epyc7002/drivers/infiniband/hw/hfi1/pio.c

2110 lines
56 KiB
C
Raw Normal View History

/*
* Copyright(c) 2015, 2016 Intel Corporation.
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* BSD LICENSE
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <linux/delay.h>
#include "hfi.h"
#include "qp.h"
#include "trace.h"
#define SC_CTXT_PACKET_EGRESS_TIMEOUT 350 /* in chip cycles */
#define SC(name) SEND_CTXT_##name
/*
* Send Context functions
*/
static void sc_wait_for_packet_egress(struct send_context *sc, int pause);
/*
* Set the CM reset bit and wait for it to clear. Use the provided
* sendctrl register. This routine has no locking.
*/
void __cm_reset(struct hfi1_devdata *dd, u64 sendctrl)
{
write_csr(dd, SEND_CTRL, sendctrl | SEND_CTRL_CM_RESET_SMASK);
while (1) {
udelay(1);
sendctrl = read_csr(dd, SEND_CTRL);
if ((sendctrl & SEND_CTRL_CM_RESET_SMASK) == 0)
break;
}
}
/* defined in header release 48 and higher */
#ifndef SEND_CTRL_UNSUPPORTED_VL_SHIFT
#define SEND_CTRL_UNSUPPORTED_VL_SHIFT 3
#define SEND_CTRL_UNSUPPORTED_VL_MASK 0xffull
#define SEND_CTRL_UNSUPPORTED_VL_SMASK (SEND_CTRL_UNSUPPORTED_VL_MASK \
<< SEND_CTRL_UNSUPPORTED_VL_SHIFT)
#endif
/* global control of PIO send */
void pio_send_control(struct hfi1_devdata *dd, int op)
{
u64 reg, mask;
unsigned long flags;
int write = 1; /* write sendctrl back */
int flush = 0; /* re-read sendctrl to make sure it is flushed */
spin_lock_irqsave(&dd->sendctrl_lock, flags);
reg = read_csr(dd, SEND_CTRL);
switch (op) {
case PSC_GLOBAL_ENABLE:
reg |= SEND_CTRL_SEND_ENABLE_SMASK;
/* Fall through */
case PSC_DATA_VL_ENABLE:
/* Disallow sending on VLs not enabled */
mask = (((~0ull) << num_vls) & SEND_CTRL_UNSUPPORTED_VL_MASK) <<
SEND_CTRL_UNSUPPORTED_VL_SHIFT;
reg = (reg & ~SEND_CTRL_UNSUPPORTED_VL_SMASK) | mask;
break;
case PSC_GLOBAL_DISABLE:
reg &= ~SEND_CTRL_SEND_ENABLE_SMASK;
break;
case PSC_GLOBAL_VLARB_ENABLE:
reg |= SEND_CTRL_VL_ARBITER_ENABLE_SMASK;
break;
case PSC_GLOBAL_VLARB_DISABLE:
reg &= ~SEND_CTRL_VL_ARBITER_ENABLE_SMASK;
break;
case PSC_CM_RESET:
__cm_reset(dd, reg);
write = 0; /* CSR already written (and flushed) */
break;
case PSC_DATA_VL_DISABLE:
reg |= SEND_CTRL_UNSUPPORTED_VL_SMASK;
flush = 1;
break;
default:
dd_dev_err(dd, "%s: invalid control %d\n", __func__, op);
break;
}
if (write) {
write_csr(dd, SEND_CTRL, reg);
if (flush)
(void)read_csr(dd, SEND_CTRL); /* flush write */
}
spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
}
/* number of send context memory pools */
#define NUM_SC_POOLS 2
/* Send Context Size (SCS) wildcards */
#define SCS_POOL_0 -1
#define SCS_POOL_1 -2
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
/* Send Context Count (SCC) wildcards */
#define SCC_PER_VL -1
#define SCC_PER_CPU -2
#define SCC_PER_KRCVQ -3
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
/* Send Context Size (SCS) constants */
#define SCS_ACK_CREDITS 32
#define SCS_VL15_CREDITS 102 /* 3 pkts of 2048B data + 128B header */
#define PIO_THRESHOLD_CEILING 4096
#define PIO_WAIT_BATCH_SIZE 5
/* default send context sizes */
static struct sc_config_sizes sc_config_sizes[SC_MAX] = {
[SC_KERNEL] = { .size = SCS_POOL_0, /* even divide, pool 0 */
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
.count = SCC_PER_VL }, /* one per NUMA */
[SC_ACK] = { .size = SCS_ACK_CREDITS,
.count = SCC_PER_KRCVQ },
[SC_USER] = { .size = SCS_POOL_0, /* even divide, pool 0 */
.count = SCC_PER_CPU }, /* one per CPU */
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
[SC_VL15] = { .size = SCS_VL15_CREDITS,
.count = 1 },
};
/* send context memory pool configuration */
struct mem_pool_config {
int centipercent; /* % of memory, in 100ths of 1% */
int absolute_blocks; /* absolute block count */
};
/* default memory pool configuration: 100% in pool 0 */
static struct mem_pool_config sc_mem_pool_config[NUM_SC_POOLS] = {
/* centi%, abs blocks */
{ 10000, -1 }, /* pool 0 */
{ 0, -1 }, /* pool 1 */
};
/* memory pool information, used when calculating final sizes */
struct mem_pool_info {
int centipercent; /*
* 100th of 1% of memory to use, -1 if blocks
* already set
*/
int count; /* count of contexts in the pool */
int blocks; /* block size of the pool */
int size; /* context size, in blocks */
};
/*
* Convert a pool wildcard to a valid pool index. The wildcards
* start at -1 and increase negatively. Map them as:
* -1 => 0
* -2 => 1
* etc.
*
* Return -1 on non-wildcard input, otherwise convert to a pool number.
*/
static int wildcard_to_pool(int wc)
{
if (wc >= 0)
return -1; /* non-wildcard */
return -wc - 1;
}
static const char *sc_type_names[SC_MAX] = {
"kernel",
"ack",
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
"user",
"vl15"
};
static const char *sc_type_name(int index)
{
if (index < 0 || index >= SC_MAX)
return "unknown";
return sc_type_names[index];
}
/*
* Read the send context memory pool configuration and send context
* size configuration. Replace any wildcards and come up with final
* counts and sizes for the send context types.
*/
int init_sc_pools_and_sizes(struct hfi1_devdata *dd)
{
struct mem_pool_info mem_pool_info[NUM_SC_POOLS] = { { 0 } };
int total_blocks = (dd->chip_pio_mem_size / PIO_BLOCK_SIZE) - 1;
int total_contexts = 0;
int fixed_blocks;
int pool_blocks;
int used_blocks;
int cp_total; /* centipercent total */
int ab_total; /* absolute block total */
int extra;
int i;
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
/*
* When SDMA is enabled, kernel context pio packet size is capped by
* "piothreshold". Reduce pio buffer allocation for kernel context by
* setting it to a fixed size. The allocation allows 3-deep buffering
* of the largest pio packets plus up to 128 bytes header, sufficient
* to maintain verbs performance.
*
* When SDMA is disabled, keep the default pooling allocation.
*/
if (HFI1_CAP_IS_KSET(SDMA)) {
u16 max_pkt_size = (piothreshold < PIO_THRESHOLD_CEILING) ?
piothreshold : PIO_THRESHOLD_CEILING;
sc_config_sizes[SC_KERNEL].size =
3 * (max_pkt_size + 128) / PIO_BLOCK_SIZE;
}
/*
* Step 0:
* - copy the centipercents/absolute sizes from the pool config
* - sanity check these values
* - add up centipercents, then later check for full value
* - add up absolute blocks, then later check for over-commit
*/
cp_total = 0;
ab_total = 0;
for (i = 0; i < NUM_SC_POOLS; i++) {
int cp = sc_mem_pool_config[i].centipercent;
int ab = sc_mem_pool_config[i].absolute_blocks;
/*
* A negative value is "unused" or "invalid". Both *can*
* be valid, but centipercent wins, so check that first
*/
if (cp >= 0) { /* centipercent valid */
cp_total += cp;
} else if (ab >= 0) { /* absolute blocks valid */
ab_total += ab;
} else { /* neither valid */
dd_dev_err(
dd,
"Send context memory pool %d: both the block count and centipercent are invalid\n",
i);
return -EINVAL;
}
mem_pool_info[i].centipercent = cp;
mem_pool_info[i].blocks = ab;
}
/* do not use both % and absolute blocks for different pools */
if (cp_total != 0 && ab_total != 0) {
dd_dev_err(
dd,
"All send context memory pools must be described as either centipercent or blocks, no mixing between pools\n");
return -EINVAL;
}
/* if any percentages are present, they must add up to 100% x 100 */
if (cp_total != 0 && cp_total != 10000) {
dd_dev_err(
dd,
"Send context memory pool centipercent is %d, expecting 10000\n",
cp_total);
return -EINVAL;
}
/* the absolute pool total cannot be more than the mem total */
if (ab_total > total_blocks) {
dd_dev_err(
dd,
"Send context memory pool absolute block count %d is larger than the memory size %d\n",
ab_total, total_blocks);
return -EINVAL;
}
/*
* Step 2:
* - copy from the context size config
* - replace context type wildcard counts with real values
* - add up non-memory pool block sizes
* - add up memory pool user counts
*/
fixed_blocks = 0;
for (i = 0; i < SC_MAX; i++) {
int count = sc_config_sizes[i].count;
int size = sc_config_sizes[i].size;
int pool;
/*
* Sanity check count: Either a positive value or
* one of the expected wildcards is valid. The positive
* value is checked later when we compare against total
* memory available.
*/
if (i == SC_ACK) {
count = dd->n_krcv_queues;
} else if (i == SC_KERNEL) {
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
count = INIT_SC_PER_VL * num_vls;
} else if (count == SCC_PER_CPU) {
count = dd->num_rcv_contexts - dd->n_krcv_queues;
} else if (count < 0) {
dd_dev_err(
dd,
"%s send context invalid count wildcard %d\n",
sc_type_name(i), count);
return -EINVAL;
}
if (total_contexts + count > dd->chip_send_contexts)
count = dd->chip_send_contexts - total_contexts;
total_contexts += count;
/*
* Sanity check pool: The conversion will return a pool
* number or -1 if a fixed (non-negative) value. The fixed
* value is checked later when we compare against
* total memory available.
*/
pool = wildcard_to_pool(size);
if (pool == -1) { /* non-wildcard */
fixed_blocks += size * count;
} else if (pool < NUM_SC_POOLS) { /* valid wildcard */
mem_pool_info[pool].count += count;
} else { /* invalid wildcard */
dd_dev_err(
dd,
"%s send context invalid pool wildcard %d\n",
sc_type_name(i), size);
return -EINVAL;
}
dd->sc_sizes[i].count = count;
dd->sc_sizes[i].size = size;
}
if (fixed_blocks > total_blocks) {
dd_dev_err(
dd,
"Send context fixed block count, %u, larger than total block count %u\n",
fixed_blocks, total_blocks);
return -EINVAL;
}
/* step 3: calculate the blocks in the pools, and pool context sizes */
pool_blocks = total_blocks - fixed_blocks;
if (ab_total > pool_blocks) {
dd_dev_err(
dd,
"Send context fixed pool sizes, %u, larger than pool block count %u\n",
ab_total, pool_blocks);
return -EINVAL;
}
/* subtract off the fixed pool blocks */
pool_blocks -= ab_total;
for (i = 0; i < NUM_SC_POOLS; i++) {
struct mem_pool_info *pi = &mem_pool_info[i];
/* % beats absolute blocks */
if (pi->centipercent >= 0)
pi->blocks = (pool_blocks * pi->centipercent) / 10000;
if (pi->blocks == 0 && pi->count != 0) {
dd_dev_err(
dd,
"Send context memory pool %d has %u contexts, but no blocks\n",
i, pi->count);
return -EINVAL;
}
if (pi->count == 0) {
/* warn about wasted blocks */
if (pi->blocks != 0)
dd_dev_err(
dd,
"Send context memory pool %d has %u blocks, but zero contexts\n",
i, pi->blocks);
pi->size = 0;
} else {
pi->size = pi->blocks / pi->count;
}
}
/* step 4: fill in the context type sizes from the pool sizes */
used_blocks = 0;
for (i = 0; i < SC_MAX; i++) {
if (dd->sc_sizes[i].size < 0) {
unsigned pool = wildcard_to_pool(dd->sc_sizes[i].size);
WARN_ON_ONCE(pool >= NUM_SC_POOLS);
dd->sc_sizes[i].size = mem_pool_info[pool].size;
}
/* make sure we are not larger than what is allowed by the HW */
#define PIO_MAX_BLOCKS 1024
if (dd->sc_sizes[i].size > PIO_MAX_BLOCKS)
dd->sc_sizes[i].size = PIO_MAX_BLOCKS;
/* calculate our total usage */
used_blocks += dd->sc_sizes[i].size * dd->sc_sizes[i].count;
}
extra = total_blocks - used_blocks;
if (extra != 0)
dd_dev_info(dd, "unused send context blocks: %d\n", extra);
return total_contexts;
}
int init_send_contexts(struct hfi1_devdata *dd)
{
u16 base;
int ret, i, j, context;
ret = init_credit_return(dd);
if (ret)
return ret;
dd->hw_to_sw = kmalloc_array(TXE_NUM_CONTEXTS, sizeof(u8),
GFP_KERNEL);
dd->send_contexts = kcalloc(dd->num_send_contexts,
sizeof(struct send_context_info),
GFP_KERNEL);
if (!dd->send_contexts || !dd->hw_to_sw) {
kfree(dd->hw_to_sw);
kfree(dd->send_contexts);
free_credit_return(dd);
return -ENOMEM;
}
/* hardware context map starts with invalid send context indices */
for (i = 0; i < TXE_NUM_CONTEXTS; i++)
dd->hw_to_sw[i] = INVALID_SCI;
/*
* All send contexts have their credit sizes. Allocate credits
* for each context one after another from the global space.
*/
context = 0;
base = 1;
for (i = 0; i < SC_MAX; i++) {
struct sc_config_sizes *scs = &dd->sc_sizes[i];
for (j = 0; j < scs->count; j++) {
struct send_context_info *sci =
&dd->send_contexts[context];
sci->type = i;
sci->base = base;
sci->credits = scs->size;
context++;
base += scs->size;
}
}
return 0;
}
/*
* Allocate a software index and hardware context of the given type.
*
* Must be called with dd->sc_lock held.
*/
static int sc_hw_alloc(struct hfi1_devdata *dd, int type, u32 *sw_index,
u32 *hw_context)
{
struct send_context_info *sci;
u32 index;
u32 context;
for (index = 0, sci = &dd->send_contexts[0];
index < dd->num_send_contexts; index++, sci++) {
if (sci->type == type && sci->allocated == 0) {
sci->allocated = 1;
/* use a 1:1 mapping, but make them non-equal */
context = dd->chip_send_contexts - index - 1;
dd->hw_to_sw[context] = index;
*sw_index = index;
*hw_context = context;
return 0; /* success */
}
}
dd_dev_err(dd, "Unable to locate a free type %d send context\n", type);
return -ENOSPC;
}
/*
* Free the send context given by its software index.
*
* Must be called with dd->sc_lock held.
*/
static void sc_hw_free(struct hfi1_devdata *dd, u32 sw_index, u32 hw_context)
{
struct send_context_info *sci;
sci = &dd->send_contexts[sw_index];
if (!sci->allocated) {
dd_dev_err(dd, "%s: sw_index %u not allocated? hw_context %u\n",
__func__, sw_index, hw_context);
}
sci->allocated = 0;
dd->hw_to_sw[hw_context] = INVALID_SCI;
}
/* return the base context of a context in a group */
static inline u32 group_context(u32 context, u32 group)
{
return (context >> group) << group;
}
/* return the size of a group */
static inline u32 group_size(u32 group)
{
return 1 << group;
}
/*
* Obtain the credit return addresses, kernel virtual and bus, for the
* given sc.
*
* To understand this routine:
* o va and dma are arrays of struct credit_return. One for each physical
* send context, per NUMA.
* o Each send context always looks in its relative location in a struct
* credit_return for its credit return.
* o Each send context in a group must have its return address CSR programmed
* with the same value. Use the address of the first send context in the
* group.
*/
static void cr_group_addresses(struct send_context *sc, dma_addr_t *dma)
{
u32 gc = group_context(sc->hw_context, sc->group);
u32 index = sc->hw_context & 0x7;
sc->hw_free = &sc->dd->cr_base[sc->node].va[gc].cr[index];
*dma = (unsigned long)
&((struct credit_return *)sc->dd->cr_base[sc->node].dma)[gc];
}
/*
* Work queue function triggered in error interrupt routine for
* kernel contexts.
*/
static void sc_halted(struct work_struct *work)
{
struct send_context *sc;
sc = container_of(work, struct send_context, halt_work);
sc_restart(sc);
}
/*
* Calculate PIO block threshold for this send context using the given MTU.
* Trigger a return when one MTU plus optional header of credits remain.
*
* Parameter mtu is in bytes.
* Parameter hdrqentsize is in DWORDs.
*
* Return value is what to write into the CSR: trigger return when
* unreturned credits pass this count.
*/
u32 sc_mtu_to_threshold(struct send_context *sc, u32 mtu, u32 hdrqentsize)
{
u32 release_credits;
u32 threshold;
/* add in the header size, then divide by the PIO block size */
mtu += hdrqentsize << 2;
release_credits = DIV_ROUND_UP(mtu, PIO_BLOCK_SIZE);
/* check against this context's credits */
if (sc->credits <= release_credits)
threshold = 1;
else
threshold = sc->credits - release_credits;
return threshold;
}
/*
* Calculate credit threshold in terms of percent of the allocated credits.
* Trigger when unreturned credits equal or exceed the percentage of the whole.
*
* Return value is what to write into the CSR: trigger return when
* unreturned credits pass this count.
*/
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
u32 sc_percent_to_threshold(struct send_context *sc, u32 percent)
{
return (sc->credits * percent) / 100;
}
/*
* Set the credit return threshold.
*/
void sc_set_cr_threshold(struct send_context *sc, u32 new_threshold)
{
unsigned long flags;
u32 old_threshold;
int force_return = 0;
spin_lock_irqsave(&sc->credit_ctrl_lock, flags);
old_threshold = (sc->credit_ctrl >>
SC(CREDIT_CTRL_THRESHOLD_SHIFT))
& SC(CREDIT_CTRL_THRESHOLD_MASK);
if (new_threshold != old_threshold) {
sc->credit_ctrl =
(sc->credit_ctrl
& ~SC(CREDIT_CTRL_THRESHOLD_SMASK))
| ((new_threshold
& SC(CREDIT_CTRL_THRESHOLD_MASK))
<< SC(CREDIT_CTRL_THRESHOLD_SHIFT));
write_kctxt_csr(sc->dd, sc->hw_context,
SC(CREDIT_CTRL), sc->credit_ctrl);
/* force a credit return on change to avoid a possible stall */
force_return = 1;
}
spin_unlock_irqrestore(&sc->credit_ctrl_lock, flags);
if (force_return)
sc_return_credits(sc);
}
/*
* set_pio_integrity
*
* Set the CHECK_ENABLE register for the send context 'sc'.
*/
void set_pio_integrity(struct send_context *sc)
{
struct hfi1_devdata *dd = sc->dd;
u64 reg = 0;
u32 hw_context = sc->hw_context;
int type = sc->type;
/*
* No integrity checks if HFI1_CAP_NO_INTEGRITY is set, or if
* we're snooping.
*/
if (likely(!HFI1_CAP_IS_KSET(NO_INTEGRITY)) &&
dd->hfi1_snoop.mode_flag != HFI1_PORT_SNOOP_MODE)
reg = hfi1_pkt_default_send_ctxt_mask(dd, type);
write_kctxt_csr(dd, hw_context, SC(CHECK_ENABLE), reg);
}
static u32 get_buffers_allocated(struct send_context *sc)
{
int cpu;
u32 ret = 0;
for_each_possible_cpu(cpu)
ret += *per_cpu_ptr(sc->buffers_allocated, cpu);
return ret;
}
static void reset_buffers_allocated(struct send_context *sc)
{
int cpu;
for_each_possible_cpu(cpu)
(*per_cpu_ptr(sc->buffers_allocated, cpu)) = 0;
}
/*
* Allocate a NUMA relative send context structure of the given type along
* with a HW context.
*/
struct send_context *sc_alloc(struct hfi1_devdata *dd, int type,
uint hdrqentsize, int numa)
{
struct send_context_info *sci;
struct send_context *sc = NULL;
dma_addr_t dma;
unsigned long flags;
u64 reg;
u32 thresh;
u32 sw_index;
u32 hw_context;
int ret;
u8 opval, opmask;
/* do not allocate while frozen */
if (dd->flags & HFI1_FROZEN)
return NULL;
sc = kzalloc_node(sizeof(*sc), GFP_KERNEL, numa);
if (!sc)
return NULL;
sc->buffers_allocated = alloc_percpu(u32);
if (!sc->buffers_allocated) {
kfree(sc);
dd_dev_err(dd,
"Cannot allocate buffers_allocated per cpu counters\n"
);
return NULL;
}
spin_lock_irqsave(&dd->sc_lock, flags);
ret = sc_hw_alloc(dd, type, &sw_index, &hw_context);
if (ret) {
spin_unlock_irqrestore(&dd->sc_lock, flags);
free_percpu(sc->buffers_allocated);
kfree(sc);
return NULL;
}
sci = &dd->send_contexts[sw_index];
sci->sc = sc;
sc->dd = dd;
sc->node = numa;
sc->type = type;
spin_lock_init(&sc->alloc_lock);
spin_lock_init(&sc->release_lock);
spin_lock_init(&sc->credit_ctrl_lock);
INIT_LIST_HEAD(&sc->piowait);
INIT_WORK(&sc->halt_work, sc_halted);
init_waitqueue_head(&sc->halt_wait);
/* grouping is always single context for now */
sc->group = 0;
sc->sw_index = sw_index;
sc->hw_context = hw_context;
cr_group_addresses(sc, &dma);
sc->credits = sci->credits;
/* PIO Send Memory Address details */
#define PIO_ADDR_CONTEXT_MASK 0xfful
#define PIO_ADDR_CONTEXT_SHIFT 16
sc->base_addr = dd->piobase + ((hw_context & PIO_ADDR_CONTEXT_MASK)
<< PIO_ADDR_CONTEXT_SHIFT);
/* set base and credits */
reg = ((sci->credits & SC(CTRL_CTXT_DEPTH_MASK))
<< SC(CTRL_CTXT_DEPTH_SHIFT))
| ((sci->base & SC(CTRL_CTXT_BASE_MASK))
<< SC(CTRL_CTXT_BASE_SHIFT));
write_kctxt_csr(dd, hw_context, SC(CTRL), reg);
set_pio_integrity(sc);
/* unmask all errors */
write_kctxt_csr(dd, hw_context, SC(ERR_MASK), (u64)-1);
/* set the default partition key */
write_kctxt_csr(dd, hw_context, SC(CHECK_PARTITION_KEY),
(SC(CHECK_PARTITION_KEY_VALUE_MASK) &
DEFAULT_PKEY) <<
SC(CHECK_PARTITION_KEY_VALUE_SHIFT));
/* per context type checks */
if (type == SC_USER) {
opval = USER_OPCODE_CHECK_VAL;
opmask = USER_OPCODE_CHECK_MASK;
} else {
opval = OPCODE_CHECK_VAL_DISABLED;
opmask = OPCODE_CHECK_MASK_DISABLED;
}
/* set the send context check opcode mask and value */
write_kctxt_csr(dd, hw_context, SC(CHECK_OPCODE),
((u64)opmask << SC(CHECK_OPCODE_MASK_SHIFT)) |
((u64)opval << SC(CHECK_OPCODE_VALUE_SHIFT)));
/* set up credit return */
reg = dma & SC(CREDIT_RETURN_ADDR_ADDRESS_SMASK);
write_kctxt_csr(dd, hw_context, SC(CREDIT_RETURN_ADDR), reg);
/*
* Calculate the initial credit return threshold.
*
* For Ack contexts, set a threshold for half the credits.
* For User contexts use the given percentage. This has been
* sanitized on driver start-up.
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
* For Kernel contexts, use the default MTU plus a header
* or half the credits, whichever is smaller. This should
* work for both the 3-deep buffering allocation and the
* pooling allocation.
*/
if (type == SC_ACK) {
thresh = sc_percent_to_threshold(sc, 50);
} else if (type == SC_USER) {
thresh = sc_percent_to_threshold(sc,
user_credit_return_threshold);
} else { /* kernel */
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
thresh = min(sc_percent_to_threshold(sc, 50),
sc_mtu_to_threshold(sc, hfi1_max_mtu,
hdrqentsize));
}
reg = thresh << SC(CREDIT_CTRL_THRESHOLD_SHIFT);
/* add in early return */
if (type == SC_USER && HFI1_CAP_IS_USET(EARLY_CREDIT_RETURN))
reg |= SC(CREDIT_CTRL_EARLY_RETURN_SMASK);
else if (HFI1_CAP_IS_KSET(EARLY_CREDIT_RETURN)) /* kernel, ack */
reg |= SC(CREDIT_CTRL_EARLY_RETURN_SMASK);
/* set up write-through credit_ctrl */
sc->credit_ctrl = reg;
write_kctxt_csr(dd, hw_context, SC(CREDIT_CTRL), reg);
/* User send contexts should not allow sending on VL15 */
if (type == SC_USER) {
reg = 1ULL << 15;
write_kctxt_csr(dd, hw_context, SC(CHECK_VL), reg);
}
spin_unlock_irqrestore(&dd->sc_lock, flags);
/*
* Allocate shadow ring to track outstanding PIO buffers _after_
* unlocking. We don't know the size until the lock is held and
* we can't allocate while the lock is held. No one is using
* the context yet, so allocate it now.
*
* User contexts do not get a shadow ring.
*/
if (type != SC_USER) {
/*
* Size the shadow ring 1 larger than the number of credits
* so head == tail can mean empty.
*/
sc->sr_size = sci->credits + 1;
sc->sr = kzalloc_node(sizeof(union pio_shadow_ring) *
sc->sr_size, GFP_KERNEL, numa);
if (!sc->sr) {
sc_free(sc);
return NULL;
}
}
hfi1_cdbg(PIO,
"Send context %u(%u) %s group %u credits %u credit_ctrl 0x%llx threshold %u\n",
sw_index,
hw_context,
sc_type_name(type),
sc->group,
sc->credits,
sc->credit_ctrl,
thresh);
return sc;
}
/* free a per-NUMA send context structure */
void sc_free(struct send_context *sc)
{
struct hfi1_devdata *dd;
unsigned long flags;
u32 sw_index;
u32 hw_context;
if (!sc)
return;
sc->flags |= SCF_IN_FREE; /* ensure no restarts */
dd = sc->dd;
if (!list_empty(&sc->piowait))
dd_dev_err(dd, "piowait list not empty!\n");
sw_index = sc->sw_index;
hw_context = sc->hw_context;
sc_disable(sc); /* make sure the HW is disabled */
flush_work(&sc->halt_work);
spin_lock_irqsave(&dd->sc_lock, flags);
dd->send_contexts[sw_index].sc = NULL;
/* clear/disable all registers set in sc_alloc */
write_kctxt_csr(dd, hw_context, SC(CTRL), 0);
write_kctxt_csr(dd, hw_context, SC(CHECK_ENABLE), 0);
write_kctxt_csr(dd, hw_context, SC(ERR_MASK), 0);
write_kctxt_csr(dd, hw_context, SC(CHECK_PARTITION_KEY), 0);
write_kctxt_csr(dd, hw_context, SC(CHECK_OPCODE), 0);
write_kctxt_csr(dd, hw_context, SC(CREDIT_RETURN_ADDR), 0);
write_kctxt_csr(dd, hw_context, SC(CREDIT_CTRL), 0);
/* release the index and context for re-use */
sc_hw_free(dd, sw_index, hw_context);
spin_unlock_irqrestore(&dd->sc_lock, flags);
kfree(sc->sr);
free_percpu(sc->buffers_allocated);
kfree(sc);
}
/* disable the context */
void sc_disable(struct send_context *sc)
{
u64 reg;
unsigned long flags;
struct pio_buf *pbuf;
if (!sc)
return;
/* do all steps, even if already disabled */
spin_lock_irqsave(&sc->alloc_lock, flags);
reg = read_kctxt_csr(sc->dd, sc->hw_context, SC(CTRL));
reg &= ~SC(CTRL_CTXT_ENABLE_SMASK);
sc->flags &= ~SCF_ENABLED;
sc_wait_for_packet_egress(sc, 1);
write_kctxt_csr(sc->dd, sc->hw_context, SC(CTRL), reg);
spin_unlock_irqrestore(&sc->alloc_lock, flags);
/*
* Flush any waiters. Once the context is disabled,
* credit return interrupts are stopped (although there
* could be one in-process when the context is disabled).
* Wait one microsecond for any lingering interrupts, then
* proceed with the flush.
*/
udelay(1);
spin_lock_irqsave(&sc->release_lock, flags);
if (sc->sr) { /* this context has a shadow ring */
while (sc->sr_tail != sc->sr_head) {
pbuf = &sc->sr[sc->sr_tail].pbuf;
if (pbuf->cb)
(*pbuf->cb)(pbuf->arg, PRC_SC_DISABLE);
sc->sr_tail++;
if (sc->sr_tail >= sc->sr_size)
sc->sr_tail = 0;
}
}
spin_unlock_irqrestore(&sc->release_lock, flags);
}
/* return SendEgressCtxtStatus.PacketOccupancy */
#define packet_occupancy(r) \
(((r) & SEND_EGRESS_CTXT_STATUS_CTXT_EGRESS_PACKET_OCCUPANCY_SMASK)\
>> SEND_EGRESS_CTXT_STATUS_CTXT_EGRESS_PACKET_OCCUPANCY_SHIFT)
/* is egress halted on the context? */
#define egress_halted(r) \
((r) & SEND_EGRESS_CTXT_STATUS_CTXT_EGRESS_HALT_STATUS_SMASK)
/* wait for packet egress, optionally pause for credit return */
static void sc_wait_for_packet_egress(struct send_context *sc, int pause)
{
struct hfi1_devdata *dd = sc->dd;
u64 reg = 0;
u64 reg_prev;
u32 loop = 0;
while (1) {
reg_prev = reg;
reg = read_csr(dd, sc->hw_context * 8 +
SEND_EGRESS_CTXT_STATUS);
/* done if egress is stopped */
if (egress_halted(reg))
break;
reg = packet_occupancy(reg);
if (reg == 0)
break;
/* counter is reset if occupancy count changes */
if (reg != reg_prev)
loop = 0;
if (loop > 50000) {
/* timed out - bounce the link */
dd_dev_err(dd,
"%s: context %u(%u) timeout waiting for packets to egress, remaining count %u, bouncing link\n",
__func__, sc->sw_index,
sc->hw_context, (u32)reg);
queue_work(dd->pport->hfi1_wq,
&dd->pport->link_bounce_work);
break;
}
loop++;
udelay(1);
}
if (pause)
/* Add additional delay to ensure chip returns all credits */
pause_for_credit_return(dd);
}
void sc_wait(struct hfi1_devdata *dd)
{
int i;
for (i = 0; i < dd->num_send_contexts; i++) {
struct send_context *sc = dd->send_contexts[i].sc;
if (!sc)
continue;
sc_wait_for_packet_egress(sc, 0);
}
}
/*
* Restart a context after it has been halted due to error.
*
* If the first step fails - wait for the halt to be asserted, return early.
* Otherwise complain about timeouts but keep going.
*
* It is expected that allocations (enabled flag bit) have been shut off
* already (only applies to kernel contexts).
*/
int sc_restart(struct send_context *sc)
{
struct hfi1_devdata *dd = sc->dd;
u64 reg;
u32 loop;
int count;
/* bounce off if not halted, or being free'd */
if (!(sc->flags & SCF_HALTED) || (sc->flags & SCF_IN_FREE))
return -EINVAL;
dd_dev_info(dd, "restarting send context %u(%u)\n", sc->sw_index,
sc->hw_context);
/*
* Step 1: Wait for the context to actually halt.
*
* The error interrupt is asynchronous to actually setting halt
* on the context.
*/
loop = 0;
while (1) {
reg = read_kctxt_csr(dd, sc->hw_context, SC(STATUS));
if (reg & SC(STATUS_CTXT_HALTED_SMASK))
break;
if (loop > 100) {
dd_dev_err(dd, "%s: context %u(%u) not halting, skipping\n",
__func__, sc->sw_index, sc->hw_context);
return -ETIME;
}
loop++;
udelay(1);
}
/*
* Step 2: Ensure no users are still trying to write to PIO.
*
* For kernel contexts, we have already turned off buffer allocation.
* Now wait for the buffer count to go to zero.
*
* For user contexts, the user handling code has cut off write access
* to the context's PIO pages before calling this routine and will
* restore write access after this routine returns.
*/
if (sc->type != SC_USER) {
/* kernel context */
loop = 0;
while (1) {
count = get_buffers_allocated(sc);
if (count == 0)
break;
if (loop > 100) {
dd_dev_err(dd,
"%s: context %u(%u) timeout waiting for PIO buffers to zero, remaining %d\n",
__func__, sc->sw_index,
sc->hw_context, count);
}
loop++;
udelay(1);
}
}
/*
* Step 3: Wait for all packets to egress.
* This is done while disabling the send context
*
* Step 4: Disable the context
*
* This is a superset of the halt. After the disable, the
* errors can be cleared.
*/
sc_disable(sc);
/*
* Step 5: Enable the context
*
* This enable will clear the halted flag and per-send context
* error flags.
*/
return sc_enable(sc);
}
/*
* PIO freeze processing. To be called after the TXE block is fully frozen.
* Go through all frozen send contexts and disable them. The contexts are
* already stopped by the freeze.
*/
void pio_freeze(struct hfi1_devdata *dd)
{
struct send_context *sc;
int i;
for (i = 0; i < dd->num_send_contexts; i++) {
sc = dd->send_contexts[i].sc;
/*
* Don't disable unallocated, unfrozen, or user send contexts.
* User send contexts will be disabled when the process
* calls into the driver to reset its context.
*/
if (!sc || !(sc->flags & SCF_FROZEN) || sc->type == SC_USER)
continue;
/* only need to disable, the context is already stopped */
sc_disable(sc);
}
}
/*
* Unfreeze PIO for kernel send contexts. The precondition for calling this
* is that all PIO send contexts have been disabled and the SPC freeze has
* been cleared. Now perform the last step and re-enable each kernel context.
* User (PSM) processing will occur when PSM calls into the kernel to
* acknowledge the freeze.
*/
void pio_kernel_unfreeze(struct hfi1_devdata *dd)
{
struct send_context *sc;
int i;
for (i = 0; i < dd->num_send_contexts; i++) {
sc = dd->send_contexts[i].sc;
if (!sc || !(sc->flags & SCF_FROZEN) || sc->type == SC_USER)
continue;
sc_enable(sc); /* will clear the sc frozen flag */
}
}
/*
* Wait for the SendPioInitCtxt.PioInitInProgress bit to clear.
* Returns:
* -ETIMEDOUT - if we wait too long
* -EIO - if there was an error
*/
static int pio_init_wait_progress(struct hfi1_devdata *dd)
{
u64 reg;
int max, count = 0;
/* max is the longest possible HW init time / delay */
max = (dd->icode == ICODE_FPGA_EMULATION) ? 120 : 5;
while (1) {
reg = read_csr(dd, SEND_PIO_INIT_CTXT);
if (!(reg & SEND_PIO_INIT_CTXT_PIO_INIT_IN_PROGRESS_SMASK))
break;
if (count >= max)
return -ETIMEDOUT;
udelay(5);
count++;
}
return reg & SEND_PIO_INIT_CTXT_PIO_INIT_ERR_SMASK ? -EIO : 0;
}
/*
* Reset all of the send contexts to their power-on state. Used
* only during manual init - no lock against sc_enable needed.
*/
void pio_reset_all(struct hfi1_devdata *dd)
{
int ret;
/* make sure the init engine is not busy */
ret = pio_init_wait_progress(dd);
/* ignore any timeout */
if (ret == -EIO) {
/* clear the error */
write_csr(dd, SEND_PIO_ERR_CLEAR,
SEND_PIO_ERR_CLEAR_PIO_INIT_SM_IN_ERR_SMASK);
}
/* reset init all */
write_csr(dd, SEND_PIO_INIT_CTXT,
SEND_PIO_INIT_CTXT_PIO_ALL_CTXT_INIT_SMASK);
udelay(2);
ret = pio_init_wait_progress(dd);
if (ret < 0) {
dd_dev_err(dd,
"PIO send context init %s while initializing all PIO blocks\n",
ret == -ETIMEDOUT ? "is stuck" : "had an error");
}
}
/* enable the context */
int sc_enable(struct send_context *sc)
{
u64 sc_ctrl, reg, pio;
struct hfi1_devdata *dd;
unsigned long flags;
int ret = 0;
if (!sc)
return -EINVAL;
dd = sc->dd;
/*
* Obtain the allocator lock to guard against any allocation
* attempts (which should not happen prior to context being
* enabled). On the release/disable side we don't need to
* worry about locking since the releaser will not do anything
* if the context accounting values have not changed.
*/
spin_lock_irqsave(&sc->alloc_lock, flags);
sc_ctrl = read_kctxt_csr(dd, sc->hw_context, SC(CTRL));
if ((sc_ctrl & SC(CTRL_CTXT_ENABLE_SMASK)))
goto unlock; /* already enabled */
/* IMPORTANT: only clear free and fill if transitioning 0 -> 1 */
*sc->hw_free = 0;
sc->free = 0;
sc->alloc_free = 0;
sc->fill = 0;
sc->fill_wrap = 0;
sc->sr_head = 0;
sc->sr_tail = 0;
sc->flags = 0;
/* the alloc lock insures no fast path allocation */
reset_buffers_allocated(sc);
/*
* Clear all per-context errors. Some of these will be set when
* we are re-enabling after a context halt. Now that the context
* is disabled, the halt will not clear until after the PIO init
* engine runs below.
*/
reg = read_kctxt_csr(dd, sc->hw_context, SC(ERR_STATUS));
if (reg)
write_kctxt_csr(dd, sc->hw_context, SC(ERR_CLEAR), reg);
/*
* The HW PIO initialization engine can handle only one init
* request at a time. Serialize access to each device's engine.
*/
spin_lock(&dd->sc_init_lock);
/*
* Since access to this code block is serialized and
* each access waits for the initialization to complete
* before releasing the lock, the PIO initialization engine
* should not be in use, so we don't have to wait for the
* InProgress bit to go down.
*/
pio = ((sc->hw_context & SEND_PIO_INIT_CTXT_PIO_CTXT_NUM_MASK) <<
SEND_PIO_INIT_CTXT_PIO_CTXT_NUM_SHIFT) |
SEND_PIO_INIT_CTXT_PIO_SINGLE_CTXT_INIT_SMASK;
write_csr(dd, SEND_PIO_INIT_CTXT, pio);
/*
* Wait until the engine is done. Give the chip the required time
* so, hopefully, we read the register just once.
*/
udelay(2);
ret = pio_init_wait_progress(dd);
spin_unlock(&dd->sc_init_lock);
if (ret) {
dd_dev_err(dd,
"sctxt%u(%u): Context not enabled due to init failure %d\n",
sc->sw_index, sc->hw_context, ret);
goto unlock;
}
/*
* All is well. Enable the context.
*/
sc_ctrl |= SC(CTRL_CTXT_ENABLE_SMASK);
write_kctxt_csr(dd, sc->hw_context, SC(CTRL), sc_ctrl);
/*
* Read SendCtxtCtrl to force the write out and prevent a timing
* hazard where a PIO write may reach the context before the enable.
*/
read_kctxt_csr(dd, sc->hw_context, SC(CTRL));
sc->flags |= SCF_ENABLED;
unlock:
spin_unlock_irqrestore(&sc->alloc_lock, flags);
return ret;
}
/* force a credit return on the context */
void sc_return_credits(struct send_context *sc)
{
if (!sc)
return;
/* a 0->1 transition schedules a credit return */
write_kctxt_csr(sc->dd, sc->hw_context, SC(CREDIT_FORCE),
SC(CREDIT_FORCE_FORCE_RETURN_SMASK));
/*
* Ensure that the write is flushed and the credit return is
* scheduled. We care more about the 0 -> 1 transition.
*/
read_kctxt_csr(sc->dd, sc->hw_context, SC(CREDIT_FORCE));
/* set back to 0 for next time */
write_kctxt_csr(sc->dd, sc->hw_context, SC(CREDIT_FORCE), 0);
}
/* allow all in-flight packets to drain on the context */
void sc_flush(struct send_context *sc)
{
if (!sc)
return;
sc_wait_for_packet_egress(sc, 1);
}
/* drop all packets on the context, no waiting until they are sent */
void sc_drop(struct send_context *sc)
{
if (!sc)
return;
dd_dev_info(sc->dd, "%s: context %u(%u) - not implemented\n",
__func__, sc->sw_index, sc->hw_context);
}
/*
* Start the software reaction to a context halt or SPC freeze:
* - mark the context as halted or frozen
* - stop buffer allocations
*
* Called from the error interrupt. Other work is deferred until
* out of the interrupt.
*/
void sc_stop(struct send_context *sc, int flag)
{
unsigned long flags;
/* mark the context */
sc->flags |= flag;
/* stop buffer allocations */
spin_lock_irqsave(&sc->alloc_lock, flags);
sc->flags &= ~SCF_ENABLED;
spin_unlock_irqrestore(&sc->alloc_lock, flags);
wake_up(&sc->halt_wait);
}
#define BLOCK_DWORDS (PIO_BLOCK_SIZE / sizeof(u32))
#define dwords_to_blocks(x) DIV_ROUND_UP(x, BLOCK_DWORDS)
/*
* The send context buffer "allocator".
*
* @sc: the PIO send context we are allocating from
* @len: length of whole packet - including PBC - in dwords
* @cb: optional callback to call when the buffer is finished sending
* @arg: argument for cb
*
* Return a pointer to a PIO buffer if successful, NULL if not enough room.
*/
struct pio_buf *sc_buffer_alloc(struct send_context *sc, u32 dw_len,
pio_release_cb cb, void *arg)
{
struct pio_buf *pbuf = NULL;
unsigned long flags;
unsigned long avail;
unsigned long blocks = dwords_to_blocks(dw_len);
u32 fill_wrap;
int trycount = 0;
u32 head, next;
spin_lock_irqsave(&sc->alloc_lock, flags);
if (!(sc->flags & SCF_ENABLED)) {
spin_unlock_irqrestore(&sc->alloc_lock, flags);
goto done;
}
retry:
avail = (unsigned long)sc->credits - (sc->fill - sc->alloc_free);
if (blocks > avail) {
/* not enough room */
if (unlikely(trycount)) { /* already tried to get more room */
spin_unlock_irqrestore(&sc->alloc_lock, flags);
goto done;
}
/* copy from receiver cache line and recalculate */
sc->alloc_free = ACCESS_ONCE(sc->free);
avail =
(unsigned long)sc->credits -
(sc->fill - sc->alloc_free);
if (blocks > avail) {
/* still no room, actively update */
spin_unlock_irqrestore(&sc->alloc_lock, flags);
sc_release_update(sc);
spin_lock_irqsave(&sc->alloc_lock, flags);
sc->alloc_free = ACCESS_ONCE(sc->free);
trycount++;
goto retry;
}
}
/* there is enough room */
preempt_disable();
this_cpu_inc(*sc->buffers_allocated);
/* read this once */
head = sc->sr_head;
/* "allocate" the buffer */
sc->fill += blocks;
fill_wrap = sc->fill_wrap;
sc->fill_wrap += blocks;
if (sc->fill_wrap >= sc->credits)
sc->fill_wrap = sc->fill_wrap - sc->credits;
/*
* Fill the parts that the releaser looks at before moving the head.
* The only necessary piece is the sent_at field. The credits
* we have just allocated cannot have been returned yet, so the
* cb and arg will not be looked at for a "while". Put them
* on this side of the memory barrier anyway.
*/
pbuf = &sc->sr[head].pbuf;
pbuf->sent_at = sc->fill;
pbuf->cb = cb;
pbuf->arg = arg;
pbuf->sc = sc; /* could be filled in at sc->sr init time */
/* make sure this is in memory before updating the head */
/* calculate next head index, do not store */
next = head + 1;
if (next >= sc->sr_size)
next = 0;
/*
* update the head - must be last! - the releaser can look at fields
* in pbuf once we move the head
*/
smp_wmb();
sc->sr_head = next;
spin_unlock_irqrestore(&sc->alloc_lock, flags);
/* finish filling in the buffer outside the lock */
pbuf->start = sc->base_addr + fill_wrap * PIO_BLOCK_SIZE;
pbuf->size = sc->credits * PIO_BLOCK_SIZE;
pbuf->end = sc->base_addr + pbuf->size;
pbuf->block_count = blocks;
pbuf->qw_written = 0;
pbuf->carry_bytes = 0;
pbuf->carry.val64 = 0;
done:
return pbuf;
}
/*
* There are at least two entities that can turn on credit return
* interrupts and they can overlap. Avoid problems by implementing
* a count scheme that is enforced by a lock. The lock is needed because
* the count and CSR write must be paired.
*/
/*
* Start credit return interrupts. This is managed by a count. If already
* on, just increment the count.
*/
void sc_add_credit_return_intr(struct send_context *sc)
{
unsigned long flags;
/* lock must surround both the count change and the CSR update */
spin_lock_irqsave(&sc->credit_ctrl_lock, flags);
if (sc->credit_intr_count == 0) {
sc->credit_ctrl |= SC(CREDIT_CTRL_CREDIT_INTR_SMASK);
write_kctxt_csr(sc->dd, sc->hw_context,
SC(CREDIT_CTRL), sc->credit_ctrl);
}
sc->credit_intr_count++;
spin_unlock_irqrestore(&sc->credit_ctrl_lock, flags);
}
/*
* Stop credit return interrupts. This is managed by a count. Decrement the
* count, if the last user, then turn the credit interrupts off.
*/
void sc_del_credit_return_intr(struct send_context *sc)
{
unsigned long flags;
WARN_ON(sc->credit_intr_count == 0);
/* lock must surround both the count change and the CSR update */
spin_lock_irqsave(&sc->credit_ctrl_lock, flags);
sc->credit_intr_count--;
if (sc->credit_intr_count == 0) {
sc->credit_ctrl &= ~SC(CREDIT_CTRL_CREDIT_INTR_SMASK);
write_kctxt_csr(sc->dd, sc->hw_context,
SC(CREDIT_CTRL), sc->credit_ctrl);
}
spin_unlock_irqrestore(&sc->credit_ctrl_lock, flags);
}
/*
* The caller must be careful when calling this. All needint calls
* must be paired with !needint.
*/
void hfi1_sc_wantpiobuf_intr(struct send_context *sc, u32 needint)
{
if (needint)
sc_add_credit_return_intr(sc);
else
sc_del_credit_return_intr(sc);
trace_hfi1_wantpiointr(sc, needint, sc->credit_ctrl);
if (needint) {
mmiowb();
sc_return_credits(sc);
}
}
/**
* sc_piobufavail - callback when a PIO buffer is available
* @sc: the send context
*
* This is called from the interrupt handler when a PIO buffer is
* available after hfi1_verbs_send() returned an error that no buffers were
* available. Disable the interrupt if there are no more QPs waiting.
*/
static void sc_piobufavail(struct send_context *sc)
{
struct hfi1_devdata *dd = sc->dd;
struct hfi1_ibdev *dev = &dd->verbs_dev;
struct list_head *list;
struct rvt_qp *qps[PIO_WAIT_BATCH_SIZE];
struct rvt_qp *qp;
struct hfi1_qp_priv *priv;
unsigned long flags;
unsigned i, n = 0;
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
if (dd->send_contexts[sc->sw_index].type != SC_KERNEL &&
dd->send_contexts[sc->sw_index].type != SC_VL15)
return;
list = &sc->piowait;
/*
* Note: checking that the piowait list is empty and clearing
* the buffer available interrupt needs to be atomic or we
* could end up with QPs on the wait list with the interrupt
* disabled.
*/
write_seqlock_irqsave(&dev->iowait_lock, flags);
while (!list_empty(list)) {
struct iowait *wait;
if (n == ARRAY_SIZE(qps))
break;
wait = list_first_entry(list, struct iowait, list);
qp = iowait_to_qp(wait);
priv = qp->priv;
list_del_init(&priv->s_iowait.list);
priv->s_iowait.lock = NULL;
/* refcount held until actual wake up */
qps[n++] = qp;
}
/*
* If there had been waiters and there are more
* insure that we redo the force to avoid a potential hang.
*/
if (n) {
hfi1_sc_wantpiobuf_intr(sc, 0);
if (!list_empty(list))
hfi1_sc_wantpiobuf_intr(sc, 1);
}
write_sequnlock_irqrestore(&dev->iowait_lock, flags);
for (i = 0; i < n; i++)
staging/rdma/hfi1: Adaptive PIO for short messages The change requires a new pio_busy field in the iowait structure to track the number of outstanding pios. The new counter together with the sdma counter serve as the basis for a packet by packet decision as to which egress mechanism to use. Since packets given to different egress mechanisms are not ordered, this scheme will preserve the order. The iowait drain/wait mechanisms are extended for a pio case. An additional qp wait flag is added for the PIO drain wait case. Currently the only pio wait is for buffers, so the no_bufs_available() routine name is changed to pio_wait() and a third argument is passed with one of the two pio wait flags to generalize the routine. A module parameter is added to hold a configurable threshold. For now, the module parameter is zero. A heuristic routine is added to return the func pointer of the proper egress routine to use. The heuristic is as follows: - SMI always uses pio - GSI,UD qps <= threshold use pio - UD qps > threadhold use sdma o No coordination with sdma is required because order is not required and this qp pio count is not maintained for UD - RC/UC ONLY packets <= threshold chose as follows: o If sdmas pending, use SDMA o Otherwise use pio and enable the pio tracking count at the time the pio buffer is allocated - RC/UC ONLY packets > threshold use SDMA o If pio's are pending the pio_wait with the new wait flag is called to delay for pios to drain The threshold is potentially reduced by the QP's mtu. The sc_buffer_alloc() has two additional args (a callback, a void *) which are exploited by the RC/UC cases to pass a new complete routine and a qp *. When the shadow ring completes the credit associated with a packet, the new complete routine is called. The verbs_pio_complete() will then decrement the busy count and trigger any drain waiters in qp destroy or reset. Reviewed-by: Jubin John <jubin.john@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-15 03:45:36 +07:00
hfi1_qp_wakeup(qps[i],
RVT_S_WAIT_PIO | RVT_S_WAIT_PIO_DRAIN);
}
/* translate a send credit update to a bit code of reasons */
static inline int fill_code(u64 hw_free)
{
int code = 0;
if (hw_free & CR_STATUS_SMASK)
code |= PRC_STATUS_ERR;
if (hw_free & CR_CREDIT_RETURN_DUE_TO_PBC_SMASK)
code |= PRC_PBC;
if (hw_free & CR_CREDIT_RETURN_DUE_TO_THRESHOLD_SMASK)
code |= PRC_THRESHOLD;
if (hw_free & CR_CREDIT_RETURN_DUE_TO_ERR_SMASK)
code |= PRC_FILL_ERR;
if (hw_free & CR_CREDIT_RETURN_DUE_TO_FORCE_SMASK)
code |= PRC_SC_DISABLE;
return code;
}
/* use the jiffies compare to get the wrap right */
#define sent_before(a, b) time_before(a, b) /* a < b */
/*
* The send context buffer "releaser".
*/
void sc_release_update(struct send_context *sc)
{
struct pio_buf *pbuf;
u64 hw_free;
u32 head, tail;
unsigned long old_free;
unsigned long free;
unsigned long extra;
unsigned long flags;
int code;
if (!sc)
return;
spin_lock_irqsave(&sc->release_lock, flags);
/* update free */
hw_free = le64_to_cpu(*sc->hw_free); /* volatile read */
old_free = sc->free;
extra = (((hw_free & CR_COUNTER_SMASK) >> CR_COUNTER_SHIFT)
- (old_free & CR_COUNTER_MASK))
& CR_COUNTER_MASK;
free = old_free + extra;
trace_hfi1_piofree(sc, extra);
/* call sent buffer callbacks */
code = -1; /* code not yet set */
head = ACCESS_ONCE(sc->sr_head); /* snapshot the head */
tail = sc->sr_tail;
while (head != tail) {
pbuf = &sc->sr[tail].pbuf;
if (sent_before(free, pbuf->sent_at)) {
/* not sent yet */
break;
}
if (pbuf->cb) {
if (code < 0) /* fill in code on first user */
code = fill_code(hw_free);
(*pbuf->cb)(pbuf->arg, code);
}
tail++;
if (tail >= sc->sr_size)
tail = 0;
}
sc->sr_tail = tail;
/* make sure tail is updated before free */
smp_wmb();
sc->free = free;
spin_unlock_irqrestore(&sc->release_lock, flags);
sc_piobufavail(sc);
}
/*
* Send context group releaser. Argument is the send context that caused
* the interrupt. Called from the send context interrupt handler.
*
* Call release on all contexts in the group.
*
* This routine takes the sc_lock without an irqsave because it is only
* called from an interrupt handler. Adjust if that changes.
*/
void sc_group_release_update(struct hfi1_devdata *dd, u32 hw_context)
{
struct send_context *sc;
u32 sw_index;
u32 gc, gc_end;
spin_lock(&dd->sc_lock);
sw_index = dd->hw_to_sw[hw_context];
if (unlikely(sw_index >= dd->num_send_contexts)) {
dd_dev_err(dd, "%s: invalid hw (%u) to sw (%u) mapping\n",
__func__, hw_context, sw_index);
goto done;
}
sc = dd->send_contexts[sw_index].sc;
if (unlikely(!sc))
goto done;
gc = group_context(hw_context, sc->group);
gc_end = gc + group_size(sc->group);
for (; gc < gc_end; gc++) {
sw_index = dd->hw_to_sw[gc];
if (unlikely(sw_index >= dd->num_send_contexts)) {
dd_dev_err(dd,
"%s: invalid hw (%u) to sw (%u) mapping\n",
__func__, hw_context, sw_index);
continue;
}
sc_release_update(dd->send_contexts[sw_index].sc);
}
done:
spin_unlock(&dd->sc_lock);
}
/*
* pio_select_send_context_vl() - select send context
* @dd: devdata
* @selector: a spreading factor
* @vl: this vl
*
* This function returns a send context based on the selector and a vl.
* The mapping fields are protected by RCU
*/
struct send_context *pio_select_send_context_vl(struct hfi1_devdata *dd,
u32 selector, u8 vl)
{
struct pio_vl_map *m;
struct pio_map_elem *e;
struct send_context *rval;
/*
* NOTE This should only happen if SC->VL changed after the initial
* checks on the QP/AH
* Default will return VL0's send context below
*/
if (unlikely(vl >= num_vls)) {
rval = NULL;
goto done;
}
rcu_read_lock();
m = rcu_dereference(dd->pio_map);
if (unlikely(!m)) {
rcu_read_unlock();
return dd->vld[0].sc;
}
e = m->map[vl & m->mask];
rval = e->ksc[selector & e->mask];
rcu_read_unlock();
done:
rval = !rval ? dd->vld[0].sc : rval;
return rval;
}
/*
* pio_select_send_context_sc() - select send context
* @dd: devdata
* @selector: a spreading factor
* @sc5: the 5 bit sc
*
* This function returns an send context based on the selector and an sc
*/
struct send_context *pio_select_send_context_sc(struct hfi1_devdata *dd,
u32 selector, u8 sc5)
{
u8 vl = sc_to_vlt(dd, sc5);
return pio_select_send_context_vl(dd, selector, vl);
}
/*
* Free the indicated map struct
*/
static void pio_map_free(struct pio_vl_map *m)
{
int i;
for (i = 0; m && i < m->actual_vls; i++)
kfree(m->map[i]);
kfree(m);
}
/*
* Handle RCU callback
*/
static void pio_map_rcu_callback(struct rcu_head *list)
{
struct pio_vl_map *m = container_of(list, struct pio_vl_map, list);
pio_map_free(m);
}
/*
* Set credit return threshold for the kernel send context
*/
static void set_threshold(struct hfi1_devdata *dd, int scontext, int i)
{
u32 thres;
thres = min(sc_percent_to_threshold(dd->kernel_send_context[scontext],
50),
sc_mtu_to_threshold(dd->kernel_send_context[scontext],
dd->vld[i].mtu,
dd->rcd[0]->rcvhdrqentsize));
sc_set_cr_threshold(dd->kernel_send_context[scontext], thres);
}
/*
* pio_map_init - called when #vls change
* @dd: hfi1_devdata
* @port: port number
* @num_vls: number of vls
* @vl_scontexts: per vl send context mapping (optional)
*
* This routine changes the mapping based on the number of vls.
*
* vl_scontexts is used to specify a non-uniform vl/send context
* loading. NULL implies auto computing the loading and giving each
* VL an uniform distribution of send contexts per VL.
*
* The auto algorithm computers the sc_per_vl and the number of extra
* send contexts. Any extra send contexts are added from the last VL
* on down
*
* rcu locking is used here to control access to the mapping fields.
*
* If either the num_vls or num_send_contexts are non-power of 2, the
* array sizes in the struct pio_vl_map and the struct pio_map_elem are
* rounded up to the next highest power of 2 and the first entry is
* reused in a round robin fashion.
*
* If an error occurs the map change is not done and the mapping is not
* chaged.
*
*/
int pio_map_init(struct hfi1_devdata *dd, u8 port, u8 num_vls, u8 *vl_scontexts)
{
int i, j;
int extra, sc_per_vl;
int scontext = 1;
int num_kernel_send_contexts = 0;
u8 lvl_scontexts[OPA_MAX_VLS];
struct pio_vl_map *oldmap, *newmap;
if (!vl_scontexts) {
for (i = 0; i < dd->num_send_contexts; i++)
if (dd->send_contexts[i].type == SC_KERNEL)
num_kernel_send_contexts++;
/* truncate divide */
sc_per_vl = num_kernel_send_contexts / num_vls;
/* extras */
extra = num_kernel_send_contexts % num_vls;
vl_scontexts = lvl_scontexts;
/* add extras from last vl down */
for (i = num_vls - 1; i >= 0; i--, extra--)
vl_scontexts[i] = sc_per_vl + (extra > 0 ? 1 : 0);
}
/* build new map */
newmap = kzalloc(sizeof(*newmap) +
roundup_pow_of_two(num_vls) *
sizeof(struct pio_map_elem *),
GFP_KERNEL);
if (!newmap)
goto bail;
newmap->actual_vls = num_vls;
newmap->vls = roundup_pow_of_two(num_vls);
newmap->mask = (1 << ilog2(newmap->vls)) - 1;
for (i = 0; i < newmap->vls; i++) {
/* save for wrap around */
int first_scontext = scontext;
if (i < newmap->actual_vls) {
int sz = roundup_pow_of_two(vl_scontexts[i]);
/* only allocate once */
newmap->map[i] = kzalloc(sizeof(*newmap->map[i]) +
sz * sizeof(struct
send_context *),
GFP_KERNEL);
if (!newmap->map[i])
goto bail;
newmap->map[i]->mask = (1 << ilog2(sz)) - 1;
/*
* assign send contexts and
* adjust credit return threshold
*/
for (j = 0; j < sz; j++) {
if (dd->kernel_send_context[scontext]) {
newmap->map[i]->ksc[j] =
dd->kernel_send_context[scontext];
set_threshold(dd, scontext, i);
}
if (++scontext >= first_scontext +
vl_scontexts[i])
/* wrap back to first send context */
scontext = first_scontext;
}
} else {
/* just re-use entry without allocating */
newmap->map[i] = newmap->map[i % num_vls];
}
scontext = first_scontext + vl_scontexts[i];
}
/* newmap in hand, save old map */
spin_lock_irq(&dd->pio_map_lock);
oldmap = rcu_dereference_protected(dd->pio_map,
lockdep_is_held(&dd->pio_map_lock));
/* publish newmap */
rcu_assign_pointer(dd->pio_map, newmap);
spin_unlock_irq(&dd->pio_map_lock);
/* success, free any old map after grace period */
if (oldmap)
call_rcu(&oldmap->list, pio_map_rcu_callback);
return 0;
bail:
/* free any partial allocation */
pio_map_free(newmap);
return -ENOMEM;
}
void free_pio_map(struct hfi1_devdata *dd)
{
/* Free PIO map if allocated */
if (rcu_access_pointer(dd->pio_map)) {
spin_lock_irq(&dd->pio_map_lock);
pio_map_free(rcu_access_pointer(dd->pio_map));
RCU_INIT_POINTER(dd->pio_map, NULL);
spin_unlock_irq(&dd->pio_map_lock);
synchronize_rcu();
}
kfree(dd->kernel_send_context);
dd->kernel_send_context = NULL;
}
int init_pervl_scs(struct hfi1_devdata *dd)
{
int i;
u64 mask, all_vl_mask = (u64)0x80ff; /* VLs 0-7, 15 */
u64 data_vls_mask = (u64)0x00ff; /* VLs 0-7 */
u32 ctxt;
struct hfi1_pportdata *ppd = dd->pport;
IB/hfi1: Reduce kernel context pio buffer allocation The pio buffers were pooled evenly among all kernel contexts and user contexts. However, the demand from kernel contexts is much lower than user contexts. This patch reduces the allocation for kernel contexts and thus makes more credits available for PSM, helping performance. This is especially useful on high core-count systems where large numbers of contexts are used. A new context type SC_VL15 is added to distinguish the context used for VL15 from other kernel contexts. The reason is that VL15 needs to support 2KB sized packet while other kernel contexts need only support packets up to the size determined by "piothreshold", which has a default value of 256. The new allocation method allows triple buffering of largest pio packets configured for these contexts. This is sufficient to maintain verbs performance. The largest pio packet size is 2048B for VL15 and "piothreshold" for other kernel contexts. A cap is applied to "piothreshold" to avoid excessive buffer allocation. The special case that SDMA is disable is handled differently. In that case, the original pooling allocation is used to better support the much higher pio traffic. Notice that if adaptive pio is disabled (piothreshold==0), the pio buffer size doesn't matter for non-VL15 kernel send contexts when SDMA is enabled because pio is not used at all on these contexts and thus the new allocation is still valid. If SDMA is disabled then pooling allocation is used as mentioned in previous paragraph. Adjustment is also made to the calculation of the credit return threshold for the kernel contexts. Instead of purely based on the MTU size, a percentage based threshold is also considered and the smaller one of the two is chosen. This is necessary to ensure that with the reduced buffer allocation credits are returned in time to avoid unnecessary stall in the send path. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mark Debbage <mark.debbage@intel.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-13 01:30:28 +07:00
dd->vld[15].sc = sc_alloc(dd, SC_VL15,
dd->rcd[0]->rcvhdrqentsize, dd->node);
if (!dd->vld[15].sc)
return -ENOMEM;
hfi1_init_ctxt(dd->vld[15].sc);
dd->vld[15].mtu = enum_to_mtu(OPA_MTU_2048);
dd->kernel_send_context = kzalloc_node(dd->num_send_contexts *
sizeof(struct send_context *),
GFP_KERNEL, dd->node);
if (!dd->kernel_send_context)
goto freesc15;
dd->kernel_send_context[0] = dd->vld[15].sc;
for (i = 0; i < num_vls; i++) {
/*
* Since this function does not deal with a specific
* receive context but we need the RcvHdrQ entry size,
* use the size from rcd[0]. It is guaranteed to be
* valid at this point and will remain the same for all
* receive contexts.
*/
dd->vld[i].sc = sc_alloc(dd, SC_KERNEL,
dd->rcd[0]->rcvhdrqentsize, dd->node);
if (!dd->vld[i].sc)
goto nomem;
dd->kernel_send_context[i + 1] = dd->vld[i].sc;
hfi1_init_ctxt(dd->vld[i].sc);
/* non VL15 start with the max MTU */
dd->vld[i].mtu = hfi1_max_mtu;
}
for (i = num_vls; i < INIT_SC_PER_VL * num_vls; i++) {
dd->kernel_send_context[i + 1] =
sc_alloc(dd, SC_KERNEL, dd->rcd[0]->rcvhdrqentsize, dd->node);
if (!dd->kernel_send_context[i + 1])
goto nomem;
hfi1_init_ctxt(dd->kernel_send_context[i + 1]);
}
sc_enable(dd->vld[15].sc);
ctxt = dd->vld[15].sc->hw_context;
mask = all_vl_mask & ~(1LL << 15);
write_kctxt_csr(dd, ctxt, SC(CHECK_VL), mask);
dd_dev_info(dd,
"Using send context %u(%u) for VL15\n",
dd->vld[15].sc->sw_index, ctxt);
for (i = 0; i < num_vls; i++) {
sc_enable(dd->vld[i].sc);
ctxt = dd->vld[i].sc->hw_context;
mask = all_vl_mask & ~(data_vls_mask);
write_kctxt_csr(dd, ctxt, SC(CHECK_VL), mask);
}
for (i = num_vls; i < INIT_SC_PER_VL * num_vls; i++) {
sc_enable(dd->kernel_send_context[i + 1]);
ctxt = dd->kernel_send_context[i + 1]->hw_context;
mask = all_vl_mask & ~(data_vls_mask);
write_kctxt_csr(dd, ctxt, SC(CHECK_VL), mask);
}
if (pio_map_init(dd, ppd->port - 1, num_vls, NULL))
goto nomem;
return 0;
nomem:
for (i = 0; i < num_vls; i++) {
sc_free(dd->vld[i].sc);
dd->vld[i].sc = NULL;
}
for (i = num_vls; i < INIT_SC_PER_VL * num_vls; i++)
sc_free(dd->kernel_send_context[i + 1]);
kfree(dd->kernel_send_context);
dd->kernel_send_context = NULL;
freesc15:
sc_free(dd->vld[15].sc);
return -ENOMEM;
}
int init_credit_return(struct hfi1_devdata *dd)
{
int ret;
int num_numa;
int i;
num_numa = num_online_nodes();
/* enforce the expectation that the numas are compact */
for (i = 0; i < num_numa; i++) {
if (!node_online(i)) {
dd_dev_err(dd, "NUMA nodes are not compact\n");
ret = -EINVAL;
goto done;
}
}
dd->cr_base = kcalloc(
num_numa,
sizeof(struct credit_return_base),
GFP_KERNEL);
if (!dd->cr_base) {
dd_dev_err(dd, "Unable to allocate credit return base\n");
ret = -ENOMEM;
goto done;
}
for (i = 0; i < num_numa; i++) {
int bytes = TXE_NUM_CONTEXTS * sizeof(struct credit_return);
set_dev_node(&dd->pcidev->dev, i);
dd->cr_base[i].va = dma_zalloc_coherent(
&dd->pcidev->dev,
bytes,
&dd->cr_base[i].dma,
GFP_KERNEL);
if (!dd->cr_base[i].va) {
set_dev_node(&dd->pcidev->dev, dd->node);
dd_dev_err(dd,
"Unable to allocate credit return DMA range for NUMA %d\n",
i);
ret = -ENOMEM;
goto done;
}
}
set_dev_node(&dd->pcidev->dev, dd->node);
ret = 0;
done:
return ret;
}
void free_credit_return(struct hfi1_devdata *dd)
{
int num_numa;
int i;
if (!dd->cr_base)
return;
num_numa = num_online_nodes();
for (i = 0; i < num_numa; i++) {
if (dd->cr_base[i].va) {
dma_free_coherent(&dd->pcidev->dev,
TXE_NUM_CONTEXTS *
sizeof(struct credit_return),
dd->cr_base[i].va,
dd->cr_base[i].dma);
}
}
kfree(dd->cr_base);
dd->cr_base = NULL;
}