2019-05-21 00:08:01 +07:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
2009-09-02 15:14:00 +07:00
|
|
|
/* Key garbage collector
|
|
|
|
|
*
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
* Copyright (C) 2009-2011 Red Hat, Inc. All Rights Reserved.
|
2009-09-02 15:14:00 +07:00
|
|
|
* Written by David Howells (dhowells@redhat.com)
|
|
|
|
|
*/
|
|
|
|
|
|
2011-08-22 20:09:11 +07:00
|
|
|
#include <linux/slab.h>
|
|
|
|
|
#include <linux/security.h>
|
2009-09-02 15:14:00 +07:00
|
|
|
#include <keys/keyring-type.h>
|
|
|
|
|
#include "internal.h"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Delay between key revocation/expiry in seconds
|
|
|
|
|
*/
|
|
|
|
|
unsigned key_gc_delay = 5 * 60;
|
|
|
|
|
|
|
|
|
|
/*
|
2011-08-22 20:09:11 +07:00
|
|
|
* Reaper for unused keys.
|
|
|
|
|
*/
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
static void key_garbage_collector(struct work_struct *work);
|
|
|
|
|
DECLARE_WORK(key_gc_work, key_garbage_collector);
|
2011-08-22 20:09:11 +07:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Reaper for links from keyrings to dead keys.
|
2009-09-02 15:14:00 +07:00
|
|
|
*/
|
2017-08-29 01:28:21 +07:00
|
|
|
static void key_gc_timer_func(struct timer_list *);
|
2017-10-05 06:27:04 +07:00
|
|
|
static DEFINE_TIMER(key_gc_timer, key_gc_timer_func);
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
|
2017-11-15 23:38:45 +07:00
|
|
|
static time64_t key_gc_next_run = TIME64_MAX;
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
static struct key_type *key_gc_dead_keytype;
|
|
|
|
|
|
|
|
|
|
static unsigned long key_gc_flags;
|
|
|
|
|
#define KEY_GC_KEY_EXPIRED 0 /* A key expired and needs unlinking */
|
|
|
|
|
#define KEY_GC_REAP_KEYTYPE 1 /* A keytype is being unregistered */
|
|
|
|
|
#define KEY_GC_REAPING_KEYTYPE 2 /* Cleared when keytype reaped */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Any key whose type gets unregistered will be re-typed to this if it can't be
|
|
|
|
|
* immediately unlinked.
|
|
|
|
|
*/
|
|
|
|
|
struct key_type key_type_dead = {
|
2017-04-18 21:31:08 +07:00
|
|
|
.name = ".dead",
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
};
|
2009-09-02 15:14:00 +07:00
|
|
|
|
|
|
|
|
/*
|
2011-01-20 23:38:33 +07:00
|
|
|
* Schedule a garbage collection run.
|
|
|
|
|
* - time precision isn't particularly important
|
2009-09-02 15:14:00 +07:00
|
|
|
*/
|
2017-11-15 23:38:45 +07:00
|
|
|
void key_schedule_gc(time64_t gc_at)
|
2009-09-02 15:14:00 +07:00
|
|
|
{
|
|
|
|
|
unsigned long expires;
|
2017-11-15 23:38:45 +07:00
|
|
|
time64_t now = ktime_get_real_seconds();
|
2009-09-02 15:14:00 +07:00
|
|
|
|
2017-11-15 23:38:45 +07:00
|
|
|
kenter("%lld", gc_at - now);
|
2009-09-02 15:14:00 +07:00
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
if (gc_at <= now || test_bit(KEY_GC_REAP_KEYTYPE, &key_gc_flags)) {
|
|
|
|
|
kdebug("IMMEDIATE");
|
2012-08-21 04:51:24 +07:00
|
|
|
schedule_work(&key_gc_work);
|
2009-09-02 15:14:00 +07:00
|
|
|
} else if (gc_at < key_gc_next_run) {
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
kdebug("DEFERRED");
|
|
|
|
|
key_gc_next_run = gc_at;
|
2009-09-02 15:14:00 +07:00
|
|
|
expires = jiffies + (gc_at - now) * HZ;
|
|
|
|
|
mod_timer(&key_gc_timer, expires);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2012-05-11 16:56:56 +07:00
|
|
|
/*
|
|
|
|
|
* Schedule a dead links collection run.
|
|
|
|
|
*/
|
|
|
|
|
void key_schedule_gc_links(void)
|
|
|
|
|
{
|
|
|
|
|
set_bit(KEY_GC_KEY_EXPIRED, &key_gc_flags);
|
2012-08-21 04:51:24 +07:00
|
|
|
schedule_work(&key_gc_work);
|
2012-05-11 16:56:56 +07:00
|
|
|
}
|
|
|
|
|
|
2009-09-02 15:14:00 +07:00
|
|
|
/*
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
* Some key's cleanup time was met after it expired, so we need to get the
|
|
|
|
|
* reaper to go through a cycle finding expired keys.
|
2009-09-02 15:14:00 +07:00
|
|
|
*/
|
2017-08-29 01:28:21 +07:00
|
|
|
static void key_gc_timer_func(struct timer_list *unused)
|
2009-09-02 15:14:00 +07:00
|
|
|
{
|
|
|
|
|
kenter("");
|
2017-11-15 23:38:45 +07:00
|
|
|
key_gc_next_run = TIME64_MAX;
|
2012-05-11 16:56:56 +07:00
|
|
|
key_schedule_gc_links();
|
2009-09-02 15:14:00 +07:00
|
|
|
}
|
|
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
/*
|
|
|
|
|
* Reap keys of dead type.
|
|
|
|
|
*
|
|
|
|
|
* We use three flags to make sure we see three complete cycles of the garbage
|
|
|
|
|
* collector: the first to mark keys of that type as being dead, the second to
|
|
|
|
|
* collect dead links and the third to clean up the dead keys. We have to be
|
|
|
|
|
* careful as there may already be a cycle in progress.
|
|
|
|
|
*
|
|
|
|
|
* The caller must be holding key_types_sem.
|
|
|
|
|
*/
|
|
|
|
|
void key_gc_keytype(struct key_type *ktype)
|
|
|
|
|
{
|
|
|
|
|
kenter("%s", ktype->name);
|
|
|
|
|
|
|
|
|
|
key_gc_dead_keytype = ktype;
|
|
|
|
|
set_bit(KEY_GC_REAPING_KEYTYPE, &key_gc_flags);
|
|
|
|
|
smp_mb();
|
|
|
|
|
set_bit(KEY_GC_REAP_KEYTYPE, &key_gc_flags);
|
|
|
|
|
|
|
|
|
|
kdebug("schedule");
|
2012-08-21 04:51:24 +07:00
|
|
|
schedule_work(&key_gc_work);
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
|
|
|
|
|
kdebug("sleep");
|
sched: Remove proliferation of wait_on_bit() action functions
The current "wait_on_bit" interface requires an 'action'
function to be provided which does the actual waiting.
There are over 20 such functions, many of them identical.
Most cases can be satisfied by one of just two functions, one
which uses io_schedule() and one which just uses schedule().
So:
Rename wait_on_bit and wait_on_bit_lock to
wait_on_bit_action and wait_on_bit_lock_action
to make it explicit that they need an action function.
Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io
which are *not* given an action function but implicitly use
a standard one.
The decision to error-out if a signal is pending is now made
based on the 'mode' argument rather than being encoded in the action
function.
All instances of the old wait_on_bit and wait_on_bit_lock which
can use the new version have been changed accordingly and their
action functions have been discarded.
wait_on_bit{_lock} does not return any specific error code in the
event of a signal so the caller must check for non-zero and
interpolate their own error code as appropriate.
The wait_on_bit() call in __fscache_wait_on_invalidate() was
ambiguous as it specified TASK_UNINTERRUPTIBLE but used
fscache_wait_bit_interruptible as an action function.
David Howells confirms this should be uniformly
"uninterruptible"
The main remaining user of wait_on_bit{,_lock}_action is NFS
which needs to use a freezer-aware schedule() call.
A comment in fs/gfs2/glock.c notes that having multiple 'action'
functions is useful as they display differently in the 'wchan'
field of 'ps'. (and /proc/$PID/wchan).
As the new bit_wait{,_io} functions are tagged "__sched", they
will not show up at all, but something higher in the stack. So
the distinction will still be visible, only with different
function names (gds2_glock_wait versus gfs2_glock_dq_wait in the
gfs2/glock.c case).
Since first version of this patch (against 3.15) two new action
functions appeared, on in NFS and one in CIFS. CIFS also now
uses an action function that makes the same freezer aware
schedule call as NFS.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: David Howells <dhowells@redhat.com> (fscache, keys)
Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2)
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 12:16:04 +07:00
|
|
|
wait_on_bit(&key_gc_flags, KEY_GC_REAPING_KEYTYPE,
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
TASK_UNINTERRUPTIBLE);
|
|
|
|
|
|
|
|
|
|
key_gc_dead_keytype = NULL;
|
|
|
|
|
kleave("");
|
|
|
|
|
}
|
|
|
|
|
|
2009-09-02 15:14:00 +07:00
|
|
|
/*
|
2012-05-11 16:56:56 +07:00
|
|
|
* Garbage collect a list of unreferenced, detached keys
|
2009-09-02 15:14:00 +07:00
|
|
|
*/
|
2012-05-11 16:56:56 +07:00
|
|
|
static noinline void key_gc_unused_keys(struct list_head *keys)
|
2009-09-02 15:14:00 +07:00
|
|
|
{
|
2012-05-11 16:56:56 +07:00
|
|
|
while (!list_empty(keys)) {
|
|
|
|
|
struct key *key =
|
|
|
|
|
list_entry(keys->next, struct key, graveyard_link);
|
2017-10-04 22:43:25 +07:00
|
|
|
short state = key->state;
|
|
|
|
|
|
2012-05-11 16:56:56 +07:00
|
|
|
list_del(&key->graveyard_link);
|
|
|
|
|
|
|
|
|
|
kdebug("- %u", key->serial);
|
|
|
|
|
key_check(key);
|
|
|
|
|
|
watch_queue: Add a key/keyring notification facility
Add a key/keyring change notification facility whereby notifications about
changes in key and keyring content and attributes can be received.
Firstly, an event queue needs to be created:
pipe2(fds, O_NOTIFICATION_PIPE);
ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, 256);
then a notification can be set up to report notifications via that queue:
struct watch_notification_filter filter = {
.nr_filters = 1,
.filters = {
[0] = {
.type = WATCH_TYPE_KEY_NOTIFY,
.subtype_filter[0] = UINT_MAX,
},
},
};
ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);
keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
After that, records will be placed into the queue when events occur in
which keys are changed in some way. Records are of the following format:
struct key_notification {
struct watch_notification watch;
__u32 key_id;
__u32 aux;
} *n;
Where:
n->watch.type will be WATCH_TYPE_KEY_NOTIFY.
n->watch.subtype will indicate the type of event, such as
NOTIFY_KEY_REVOKED.
n->watch.info & WATCH_INFO_LENGTH will indicate the length of the
record.
n->watch.info & WATCH_INFO_ID will be the second argument to
keyctl_watch_key(), shifted.
n->key will be the ID of the affected key.
n->aux will hold subtype-dependent information, such as the key
being linked into the keyring specified by n->key in the case of
NOTIFY_KEY_LINKED.
Note that it is permissible for event records to be of variable length -
or, at least, the length may be dependent on the subtype. Note also that
the queue can be shared between multiple notifications of various types.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
2020-01-15 00:07:11 +07:00
|
|
|
#ifdef CONFIG_KEY_NOTIFICATIONS
|
|
|
|
|
remove_watch_list(key->watchers, key->serial);
|
|
|
|
|
key->watchers = NULL;
|
|
|
|
|
#endif
|
|
|
|
|
|
2015-10-15 23:21:37 +07:00
|
|
|
/* Throw away the key data if the key is instantiated */
|
2017-10-04 22:43:25 +07:00
|
|
|
if (state == KEY_IS_POSITIVE && key->type->destroy)
|
2015-09-25 22:30:08 +07:00
|
|
|
key->type->destroy(key);
|
|
|
|
|
|
2012-05-11 16:56:56 +07:00
|
|
|
security_key_free(key);
|
|
|
|
|
|
|
|
|
|
/* deal with the user's key tracking and quota */
|
|
|
|
|
if (test_bit(KEY_FLAG_IN_QUOTA, &key->flags)) {
|
|
|
|
|
spin_lock(&key->user->lock);
|
|
|
|
|
key->user->qnkeys--;
|
|
|
|
|
key->user->qnbytes -= key->quotalen;
|
|
|
|
|
spin_unlock(&key->user->lock);
|
|
|
|
|
}
|
2009-09-02 15:14:00 +07:00
|
|
|
|
2012-05-11 16:56:56 +07:00
|
|
|
atomic_dec(&key->user->nkeys);
|
2017-10-04 22:43:25 +07:00
|
|
|
if (state != KEY_IS_UNINSTANTIATED)
|
2012-05-11 16:56:56 +07:00
|
|
|
atomic_dec(&key->user->nikeys);
|
2009-09-02 15:14:00 +07:00
|
|
|
|
2014-12-29 21:39:01 +07:00
|
|
|
key_user_put(key->user);
|
2019-06-27 03:02:32 +07:00
|
|
|
key_put_tag(key->domain_tag);
|
2012-05-11 16:56:56 +07:00
|
|
|
kfree(key->description);
|
2009-09-02 15:14:00 +07:00
|
|
|
|
2017-06-08 20:49:26 +07:00
|
|
|
memzero_explicit(key, sizeof(*key));
|
2012-05-11 16:56:56 +07:00
|
|
|
kmem_cache_free(key_jar, key);
|
|
|
|
|
}
|
2009-09-02 15:14:00 +07:00
|
|
|
}
|
2011-08-22 20:09:11 +07:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Garbage collector for unused keys.
|
|
|
|
|
*
|
|
|
|
|
* This is done in process context so that we don't have to disable interrupts
|
|
|
|
|
* all over the place. key_put() schedules this rather than trying to do the
|
|
|
|
|
* cleanup itself, which means key_put() doesn't have to sleep.
|
|
|
|
|
*/
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
static void key_garbage_collector(struct work_struct *work)
|
2011-08-22 20:09:11 +07:00
|
|
|
{
|
2012-05-11 16:56:56 +07:00
|
|
|
static LIST_HEAD(graveyard);
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
static u8 gc_state; /* Internal persistent state */
|
|
|
|
|
#define KEY_GC_REAP_AGAIN 0x01 /* - Need another cycle */
|
|
|
|
|
#define KEY_GC_REAPING_LINKS 0x02 /* - We need to reap links */
|
|
|
|
|
#define KEY_GC_SET_TIMER 0x04 /* - We need to restart the timer */
|
|
|
|
|
#define KEY_GC_REAPING_DEAD_1 0x10 /* - We need to mark dead keys */
|
|
|
|
|
#define KEY_GC_REAPING_DEAD_2 0x20 /* - We need to reap dead key links */
|
|
|
|
|
#define KEY_GC_REAPING_DEAD_3 0x40 /* - We need to reap dead keys */
|
|
|
|
|
#define KEY_GC_FOUND_DEAD_KEY 0x80 /* - We found at least one dead key */
|
|
|
|
|
|
|
|
|
|
struct rb_node *cursor;
|
2011-08-22 20:09:11 +07:00
|
|
|
struct key *key;
|
2017-11-15 23:38:45 +07:00
|
|
|
time64_t new_timer, limit;
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
|
|
|
|
|
kenter("[%lx,%x]", key_gc_flags, gc_state);
|
|
|
|
|
|
2017-11-15 23:38:45 +07:00
|
|
|
limit = ktime_get_real_seconds();
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
if (limit > key_gc_delay)
|
|
|
|
|
limit -= key_gc_delay;
|
|
|
|
|
else
|
|
|
|
|
limit = key_gc_delay;
|
|
|
|
|
|
|
|
|
|
/* Work out what we're going to be doing in this pass */
|
|
|
|
|
gc_state &= KEY_GC_REAPING_DEAD_1 | KEY_GC_REAPING_DEAD_2;
|
|
|
|
|
gc_state <<= 1;
|
|
|
|
|
if (test_and_clear_bit(KEY_GC_KEY_EXPIRED, &key_gc_flags))
|
|
|
|
|
gc_state |= KEY_GC_REAPING_LINKS | KEY_GC_SET_TIMER;
|
|
|
|
|
|
|
|
|
|
if (test_and_clear_bit(KEY_GC_REAP_KEYTYPE, &key_gc_flags))
|
|
|
|
|
gc_state |= KEY_GC_REAPING_DEAD_1;
|
|
|
|
|
kdebug("new pass %x", gc_state);
|
|
|
|
|
|
2017-11-15 23:38:45 +07:00
|
|
|
new_timer = TIME64_MAX;
|
2011-08-22 20:09:11 +07:00
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
/* As only this function is permitted to remove things from the key
|
|
|
|
|
* serial tree, if cursor is non-NULL then it will always point to a
|
|
|
|
|
* valid node in the tree - even if lock got dropped.
|
|
|
|
|
*/
|
2011-08-22 20:09:11 +07:00
|
|
|
spin_lock(&key_serial_lock);
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
cursor = rb_first(&key_serial_tree);
|
2011-08-22 20:09:11 +07:00
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
continue_scanning:
|
|
|
|
|
while (cursor) {
|
|
|
|
|
key = rb_entry(cursor, struct key, serial_node);
|
|
|
|
|
cursor = rb_next(cursor);
|
2011-08-22 20:09:11 +07:00
|
|
|
|
2017-03-31 19:20:48 +07:00
|
|
|
if (refcount_read(&key->usage) == 0)
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
goto found_unreferenced_key;
|
|
|
|
|
|
|
|
|
|
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_1)) {
|
|
|
|
|
if (key->type == key_gc_dead_keytype) {
|
|
|
|
|
gc_state |= KEY_GC_FOUND_DEAD_KEY;
|
|
|
|
|
set_bit(KEY_FLAG_DEAD, &key->flags);
|
2019-07-11 08:43:43 +07:00
|
|
|
key->perm = 0;
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
goto skip_dead_key;
|
2016-09-01 06:05:43 +07:00
|
|
|
} else if (key->type == &key_type_keyring &&
|
|
|
|
|
key->restrict_link) {
|
|
|
|
|
goto found_restricted_keyring;
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (gc_state & KEY_GC_SET_TIMER) {
|
|
|
|
|
if (key->expiry > limit && key->expiry < new_timer) {
|
2017-11-15 23:38:45 +07:00
|
|
|
kdebug("will expire %x in %lld",
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
key_serial(key), key->expiry - limit);
|
|
|
|
|
new_timer = key->expiry;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2))
|
|
|
|
|
if (key->type == key_gc_dead_keytype)
|
|
|
|
|
gc_state |= KEY_GC_FOUND_DEAD_KEY;
|
|
|
|
|
|
|
|
|
|
if ((gc_state & KEY_GC_REAPING_LINKS) ||
|
|
|
|
|
unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
|
|
|
|
|
if (key->type == &key_type_keyring)
|
|
|
|
|
goto found_keyring;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_3))
|
|
|
|
|
if (key->type == key_gc_dead_keytype)
|
|
|
|
|
goto destroy_dead_key;
|
|
|
|
|
|
|
|
|
|
skip_dead_key:
|
|
|
|
|
if (spin_is_contended(&key_serial_lock) || need_resched())
|
|
|
|
|
goto contended;
|
2011-08-22 20:09:11 +07:00
|
|
|
}
|
|
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
contended:
|
2011-08-22 20:09:11 +07:00
|
|
|
spin_unlock(&key_serial_lock);
|
|
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
maybe_resched:
|
|
|
|
|
if (cursor) {
|
|
|
|
|
cond_resched();
|
|
|
|
|
spin_lock(&key_serial_lock);
|
|
|
|
|
goto continue_scanning;
|
|
|
|
|
}
|
2011-08-22 20:09:11 +07:00
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
/* We've completed the pass. Set the timer if we need to and queue a
|
|
|
|
|
* new cycle if necessary. We keep executing cycles until we find one
|
|
|
|
|
* where we didn't reap any keys.
|
|
|
|
|
*/
|
|
|
|
|
kdebug("pass complete");
|
2011-08-22 20:09:11 +07:00
|
|
|
|
2017-11-15 23:38:45 +07:00
|
|
|
if (gc_state & KEY_GC_SET_TIMER && new_timer != (time64_t)TIME64_MAX) {
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
new_timer += key_gc_delay;
|
|
|
|
|
key_schedule_gc(new_timer);
|
|
|
|
|
}
|
2011-08-22 20:09:11 +07:00
|
|
|
|
2012-05-11 16:56:56 +07:00
|
|
|
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2) ||
|
|
|
|
|
!list_empty(&graveyard)) {
|
|
|
|
|
/* Make sure that all pending keyring payload destructions are
|
|
|
|
|
* fulfilled and that people aren't now looking at dead or
|
|
|
|
|
* dying keys that they don't have a reference upon or a link
|
|
|
|
|
* to.
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
*/
|
2012-05-11 16:56:56 +07:00
|
|
|
kdebug("gc sync");
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
synchronize_rcu();
|
2011-08-22 20:09:11 +07:00
|
|
|
}
|
|
|
|
|
|
2012-05-11 16:56:56 +07:00
|
|
|
if (!list_empty(&graveyard)) {
|
|
|
|
|
kdebug("gc keys");
|
|
|
|
|
key_gc_unused_keys(&graveyard);
|
|
|
|
|
}
|
|
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
if (unlikely(gc_state & (KEY_GC_REAPING_DEAD_1 |
|
|
|
|
|
KEY_GC_REAPING_DEAD_2))) {
|
|
|
|
|
if (!(gc_state & KEY_GC_FOUND_DEAD_KEY)) {
|
|
|
|
|
/* No remaining dead keys: short circuit the remaining
|
|
|
|
|
* keytype reap cycles.
|
|
|
|
|
*/
|
|
|
|
|
kdebug("dead short");
|
|
|
|
|
gc_state &= ~(KEY_GC_REAPING_DEAD_1 | KEY_GC_REAPING_DEAD_2);
|
|
|
|
|
gc_state |= KEY_GC_REAPING_DEAD_3;
|
|
|
|
|
} else {
|
|
|
|
|
gc_state |= KEY_GC_REAP_AGAIN;
|
|
|
|
|
}
|
|
|
|
|
}
|
2011-08-22 20:09:11 +07:00
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_3)) {
|
|
|
|
|
kdebug("dead wake");
|
|
|
|
|
smp_mb();
|
|
|
|
|
clear_bit(KEY_GC_REAPING_KEYTYPE, &key_gc_flags);
|
|
|
|
|
wake_up_bit(&key_gc_flags, KEY_GC_REAPING_KEYTYPE);
|
|
|
|
|
}
|
2011-08-22 20:09:11 +07:00
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
if (gc_state & KEY_GC_REAP_AGAIN)
|
2012-08-21 04:51:24 +07:00
|
|
|
schedule_work(&key_gc_work);
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
kleave(" [end %x]", gc_state);
|
|
|
|
|
return;
|
2011-08-22 20:09:11 +07:00
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
/* We found an unreferenced key - once we've removed it from the tree,
|
|
|
|
|
* we can safely drop the lock.
|
|
|
|
|
*/
|
|
|
|
|
found_unreferenced_key:
|
|
|
|
|
kdebug("unrefd key %d", key->serial);
|
|
|
|
|
rb_erase(&key->serial_node, &key_serial_tree);
|
|
|
|
|
spin_unlock(&key_serial_lock);
|
2011-08-22 20:09:11 +07:00
|
|
|
|
2012-05-11 16:56:56 +07:00
|
|
|
list_add_tail(&key->graveyard_link, &graveyard);
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
gc_state |= KEY_GC_REAP_AGAIN;
|
|
|
|
|
goto maybe_resched;
|
2011-08-22 20:09:11 +07:00
|
|
|
|
2016-09-01 06:05:43 +07:00
|
|
|
/* We found a restricted keyring and need to update the restriction if
|
|
|
|
|
* it is associated with the dead key type.
|
|
|
|
|
*/
|
|
|
|
|
found_restricted_keyring:
|
|
|
|
|
spin_unlock(&key_serial_lock);
|
|
|
|
|
keyring_restriction_gc(key, key_gc_dead_keytype);
|
|
|
|
|
goto maybe_resched;
|
|
|
|
|
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
/* We found a keyring and we need to check the payload for links to
|
|
|
|
|
* dead or expired keys. We don't flag another reap immediately as we
|
|
|
|
|
* have to wait for the old payload to be destroyed by RCU before we
|
|
|
|
|
* can reap the keys to which it refers.
|
|
|
|
|
*/
|
|
|
|
|
found_keyring:
|
|
|
|
|
spin_unlock(&key_serial_lock);
|
2013-11-14 20:02:31 +07:00
|
|
|
keyring_gc(key, limit);
|
KEYS: Correctly destroy key payloads when their keytype is removed
unregister_key_type() has code to mark a key as dead and make it unavailable in
one loop and then destroy all those unavailable key payloads in the next loop.
However, the loop to mark keys dead renders the key undetectable to the second
loop by changing the key type pointer also.
Fix this by the following means:
(1) The key code has two garbage collectors: one deletes unreferenced keys and
the other alters keyrings to delete links to old dead, revoked and expired
keys. They can end up holding each other up as both want to scan the key
serial tree under spinlock. Combine these into a single routine.
(2) Move the dead key marking, dead link removal and dead key removal into the
garbage collector as a three phase process running over the three cycles
of the normal garbage collection procedure. This is tracked by the
KEY_GC_REAPING_DEAD_1, _2 and _3 state flags.
unregister_key_type() then just unlinks the key type from the list, wakes
up the garbage collector and waits for the third phase to complete.
(3) Downgrade the key types sem in unregister_key_type() once it has deleted
the key type from the list so that it doesn't block the keyctl() syscall.
(4) Dead keys that cannot be simply removed in the third phase have their
payloads destroyed with the key's semaphore write-locked to prevent
interference by the keyctl() syscall. There should be no in-kernel users
of dead keys of that type by the point of unregistration, though keyctl()
may be holding a reference.
(5) Only perform timer recalculation in the GC if the timer actually expired.
If it didn't, we'll get another cycle when it goes off - and if the key
that actually triggered it has been removed, it's not a problem.
(6) Only garbage collect link if the timer expired or if we're doing dead key
clean up phase 2.
(7) As only key_garbage_collector() is permitted to use rb_erase() on the key
serial tree, it doesn't need to revalidate its cursor after dropping the
spinlock as the node the cursor points to must still exist in the tree.
(8) Drop the spinlock in the GC if there is contention on it or if we need to
reschedule. After dealing with that, get the spinlock again and resume
scanning.
This has been tested in the following ways:
(1) Run the keyutils testsuite against it.
(2) Using the AF_RXRPC and RxKAD modules to test keytype removal:
Load the rxrpc_s key type:
# insmod /tmp/af-rxrpc.ko
# insmod /tmp/rxkad.ko
Create a key (http://people.redhat.com/~dhowells/rxrpc/listen.c):
# /tmp/listen &
[1] 8173
Find the key:
# grep rxrpc_s /proc/keys
091086e1 I--Q-- 1 perm 39390000 0 0 rxrpc_s 52:2
Link it to a session keyring, preferably one with a higher serial number:
# keyctl link 0x20e36251 @s
Kill the process (the key should remain as it's linked to another place):
# fg
/tmp/listen
^C
Remove the key type:
rmmod rxkad
rmmod af-rxrpc
This can be made a more effective test by altering the following part of
the patch:
if (unlikely(gc_state & KEY_GC_REAPING_DEAD_2)) {
/* Make sure everyone revalidates their keys if we marked a
* bunch as being dead and make sure all keyring ex-payloads
* are destroyed.
*/
kdebug("dead sync");
synchronize_rcu();
To call synchronize_rcu() in GC phase 1 instead. That causes that the
keyring's old payload content to hang around longer until it's RCU
destroyed - which usually happens after GC phase 3 is complete. This
allows the destroy_dead_key branch to be tested.
Reported-by: Benjamin Coddington <bcodding@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-08-22 20:09:36 +07:00
|
|
|
goto maybe_resched;
|
|
|
|
|
|
|
|
|
|
/* We found a dead key that is still referenced. Reset its type and
|
|
|
|
|
* destroy its payload with its semaphore held.
|
|
|
|
|
*/
|
|
|
|
|
destroy_dead_key:
|
|
|
|
|
spin_unlock(&key_serial_lock);
|
|
|
|
|
kdebug("destroy key %d", key->serial);
|
|
|
|
|
down_write(&key->sem);
|
|
|
|
|
key->type = &key_type_dead;
|
|
|
|
|
if (key_gc_dead_keytype->destroy)
|
|
|
|
|
key_gc_dead_keytype->destroy(key);
|
|
|
|
|
memset(&key->payload, KEY_DESTROY, sizeof(key->payload));
|
|
|
|
|
up_write(&key->sem);
|
|
|
|
|
goto maybe_resched;
|
2011-08-22 20:09:11 +07:00
|
|
|
}
|