linux_dsm_epyc7002/arch/arm/mach-mmp/include/mach/entry-macro.S

/*
 * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <mach/regs-icu.h>

	.macro	get_irqnr_preamble, base, tmp
	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
	and	\tmp, \tmp, #0xff00
	cmp	\tmp, #0x5800
	ldr	\base, =ICU_VIRT_BASE
	addne	\base, \base, #0x10c		@ PJ1 AP INT SEL register
	addeq	\base, \base, #0x104		@ PJ4 IRQ SEL register
	.endm

	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
	ldr	\tmp, [\base, #0]
	and	\irqnr, \tmp, #0x3f
	tst	\tmp, #(1 << 6)
	.endm
[ARM] pxa: add base support for Marvell's PXA168 processor line """The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """ See http://www.marvell.com/featured/pxa168.jsp for more information. 1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on 2. Clock reuses Russell's common clkdev, and added the basic support for UART1/2. 3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that: a. this array of device description is marked with __initdata and can be freed up system is fully up b. which means board code has to add all needed devices early in his initializing function c. platform specific data can now be marked as __initdata since they are allocated and copied by platform_device_add_data() 4. only the basic UART1/2/3 are added, more devices will come later. Signed-off-by: Jason Chagas <chagas@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> 2009-01-20 13:15:18 +07:00			`/*`
			`* linux/arch/arm/mach-mmp/include/mach/entry-macro.S`
			`*`
			`* This program is free software; you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License version 2 as`
			`* published by the Free Software Foundation.`
			`*/`

			`#include <mach/regs-icu.h>`

			`.macro get_irqnr_preamble, base, tmp`
[ARM] mmp: add support for Marvell MMP2 Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's ARMv6 compatible. Support basic interrupt handler and timer, and basic support for MMP2 based FLINT platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> 2009-12-04 21:41:28 +07:00			`mrc p15, 0, \tmp, c0, c0, 0 @ CPUID`
			`and \tmp, \tmp, #0xff00`
			`cmp \tmp, #0x5800`
			`ldr \base, =ICU_VIRT_BASE`
			`addne \base, \base, #0x10c @ PJ1 AP INT SEL register`
			`addeq \base, \base, #0x104 @ PJ4 IRQ SEL register`
[ARM] pxa: add base support for Marvell's PXA168 processor line """The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """ See http://www.marvell.com/featured/pxa168.jsp for more information. 1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on 2. Clock reuses Russell's common clkdev, and added the basic support for UART1/2. 3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that: a. this array of device description is marked with __initdata and can be freed up system is fully up b. which means board code has to add all needed devices early in his initializing function c. platform specific data can now be marked as __initdata since they are allocated and copied by platform_device_add_data() 4. only the basic UART1/2/3 are added, more devices will come later. Signed-off-by: Jason Chagas <chagas@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> 2009-01-20 13:15:18 +07:00			`.endm`

			`.macro get_irqnr_and_base, irqnr, irqstat, base, tmp`
			`ldr \tmp, [\base, #0]`
			`and \irqnr, \tmp, #0x3f`
			`tst \tmp, #(1 << 6)`
			`.endm`