AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-15 10:46:49 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
22f8cc6e33
linux_dsm_epyc7002/drivers/usb/serial/qcserial.c

479 lines
17 KiB
C
Raw Normal View History

USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
/*
* Qualcomm Serial USB driver
*
* Copyright (c) 2008 QUALCOMM Incorporated.
* Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
* Copyright (c) 2009 Novell Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
*/
#include <linux/tty.h>
#include <linux/tty_flip.h>
usb: Add module.h to drivers/usb consumers who really use it. The situation up to this point meant that module.h was pretty much everywhere, regardless of whether you asked for it or not. We are fixing that, so give the USB folks who want it an actual include of it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-04 03:09:31 +07:00
#include <linux/module.h>
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
#include <linux/usb.h>
#include <linux/usb/serial.h>
USB: qcserial: Use generic USB wwan code Make qcserial use the generic USB wwan code. This should result in a performance improvement. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01 23:31:09 +07:00
#include <linux/slab.h>
#include "usb-wwan.h"
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
#define DRIVER_AUTHOR "Qualcomm Inc"
#define DRIVER_DESC "Qualcomm USB Serial driver"
USB: qcserial: Add support for Quectel EC20 Mini PCIe module It seems like this device has same vendor and product IDs as G2K devices, but it has different number of interfaces(4 vs 5) and also different interface layout which makes it currently unusable: usbcore: registered new interface driver qcserial usbserial: USB Serial support registered for Qualcomm USB modem usb 2-1.2: unknown number of interfaces: 5 lsusb output: Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Wireless Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x9215 Acer Gobi 2000 Wireless Modem bcdDevice 2.32 iManufacturer 1 Quectel iProduct 2 Quectel LTE Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 209 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Signed-off-by: Petr Štetiar <ynezz@true.cz> Cc: stable <stable@vger.kernel.org> [johan: rename define and add comment ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-03 17:25:28 +07:00
#define QUECTEL_EC20_PID 0x9215
usb: qcserial: refactor device layout selection Preparing for more supported standard device layouts. Keeping the matching macros unchanged to avoid breaking stable backporting of new device additions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:44 +07:00
/* standard device layouts supported by this driver */
enum qcserial_layouts {
QCSERIAL_G2K = 0, /* Gobi 2000 */
QCSERIAL_G1K = 1, /* Gobi 1000 */
usb: qcserial: define and use Sierra Wireless layout All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:45 +07:00
QCSERIAL_SWI = 2, /* Sierra Wireless */
USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem Added new device layout "DEVICE_HWI" and also added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke <mardnh@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-17 03:17:30 +07:00
QCSERIAL_HWI = 3, /* Huawei */
usb: qcserial: refactor device layout selection Preparing for more supported standard device layouts. Keeping the matching macros unchanged to avoid breaking stable backporting of new device additions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:44 +07:00
};
USB: qcserial: don't grab QMI port on Gobi 1000 devices Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-25 02:08:43 +07:00
#define DEVICE_G1K(v, p) \
usb: qcserial: refactor device layout selection Preparing for more supported standard device layouts. Keeping the matching macros unchanged to avoid breaking stable backporting of new device additions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:44 +07:00
USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
usb: qcserial: define and use Sierra Wireless layout All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:45 +07:00
#define DEVICE_SWI(v, p) \
USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI
USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem Added new device layout "DEVICE_HWI" and also added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke <mardnh@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-17 03:17:30 +07:00
#define DEVICE_HWI(v, p) \
USB_DEVICE(v, p), .driver_info = QCSERIAL_HWI
USB: qcserial: don't grab QMI port on Gobi 1000 devices Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-25 02:08:43 +07:00
USB serial: make USB device id constant The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-10 21:34:24 +07:00
static const struct usb_device_id id_table[] = {
USB: qcserial: don't grab QMI port on Gobi 1000 devices Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-25 02:08:43 +07:00
/* Gobi 1000 devices */
{DEVICE_G1K(0x05c6, 0x9211)}, /* Acer Gobi QDL device */
{DEVICE_G1K(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{DEVICE_G1K(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
{DEVICE_G1K(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */
{DEVICE_G1K(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
{DEVICE_G1K(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */
{DEVICE_G1K(0x413c, 0x8172)}, /* Dell Gobi Modem device */
{DEVICE_G1K(0x413c, 0x8171)}, /* Dell Gobi QDL device */
USB: option,qcserial: move Novatel Gobi1K IDs to qcserial These devices are all Gobi1K devices (according to the Windows INF files) and should be handled by qcserial instead of option. Their network port is handled by qmi_wwan. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-21 04:07:40 +07:00
{DEVICE_G1K(0x1410, 0xa001)}, /* Novatel/Verizon USB-1000 */
{DEVICE_G1K(0x1410, 0xa002)}, /* Novatel Gobi Modem device */
{DEVICE_G1K(0x1410, 0xa003)}, /* Novatel Gobi Modem device */
{DEVICE_G1K(0x1410, 0xa004)}, /* Novatel Gobi Modem device */
{DEVICE_G1K(0x1410, 0xa005)}, /* Novatel Gobi Modem device */
{DEVICE_G1K(0x1410, 0xa006)}, /* Novatel Gobi Modem device */
{DEVICE_G1K(0x1410, 0xa007)}, /* Novatel Gobi Modem device */
USB: qcserial: don't grab QMI port on Gobi 1000 devices Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-25 02:08:43 +07:00
{DEVICE_G1K(0x1410, 0xa008)}, /* Novatel Gobi QDL device */
{DEVICE_G1K(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
{DEVICE_G1K(0x0b05, 0x1774)}, /* Asus Gobi QDL device */
{DEVICE_G1K(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
{DEVICE_G1K(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */
{DEVICE_G1K(0x1557, 0x0a80)}, /* OQO Gobi QDL device */
{DEVICE_G1K(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
{DEVICE_G1K(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
{DEVICE_G1K(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
{DEVICE_G1K(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
{DEVICE_G1K(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
{DEVICE_G1K(0x05c6, 0x9008)}, /* Generic Gobi QDL device */
{DEVICE_G1K(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
{DEVICE_G1K(0x05c6, 0x9201)}, /* Generic Gobi QDL device */
{DEVICE_G1K(0x05c6, 0x9221)}, /* Generic Gobi QDL device */
{DEVICE_G1K(0x05c6, 0x9231)}, /* Generic Gobi QDL device */
{DEVICE_G1K(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */
USB: qcserial: add Telit Gobi QDL device Add VID and PID for Telit Gobi QDL device Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-28 22:48:54 +07:00
{DEVICE_G1K(0x1bc7, 0x900e)}, /* Telit Gobi QDL device */
USB: qcserial: don't grab QMI port on Gobi 1000 devices Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-25 02:08:43 +07:00
/* Gobi 2000 devices */
{USB_DEVICE(0x1410, 0xa010)}, /* Novatel Gobi 2000 QDL device */
{USB_DEVICE(0x1410, 0xa011)}, /* Novatel Gobi 2000 QDL device */
{USB_DEVICE(0x1410, 0xa012)}, /* Novatel Gobi 2000 QDL device */
{USB_DEVICE(0x1410, 0xa013)}, /* Novatel Gobi 2000 QDL device */
{USB_DEVICE(0x1410, 0xa014)}, /* Novatel Gobi 2000 QDL device */
USB: qcserial: add new device ids This patch adds various USB device IDs for Gobi 2000 devices, as found in the drivers available at https://www.codeaurora.org/wiki/GOBI_Releases Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-10 18:36:43 +07:00
{USB_DEVICE(0x413c, 0x8185)}, /* Dell Gobi 2000 QDL device (N0218, VU936) */
{USB_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
USB: New PIDs for Qualcomm gobi 2000 (qcserial) Adds support for the Generic Qualcomm Gobi 2000 WWAN UMTS/CDMA modem Signed-off-by: Andrew Bird <ajb@spheresytems.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-02 02:50:07 +07:00
{USB_DEVICE(0x05c6, 0x9208)}, /* Generic Gobi 2000 QDL device */
{USB_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
USB: qcserial: add new device ids This patch adds various USB device IDs for Gobi 2000 devices, as found in the drivers available at https://www.codeaurora.org/wiki/GOBI_Releases Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-10 18:36:43 +07:00
{USB_DEVICE(0x05c6, 0x9224)}, /* Sony Gobi 2000 QDL device (N0279, VU730) */
{USB_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
{USB_DEVICE(0x05c6, 0x9244)}, /* Samsung Gobi 2000 QDL device (VL176) */
{USB_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */
{USB_DEVICE(0x03f0, 0x241d)}, /* HP Gobi 2000 QDL device (VP412) */
{USB_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */
{USB_DEVICE(0x05c6, 0x9214)}, /* Acer Gobi 2000 QDL device (VP413) */
{USB_DEVICE(0x05c6, 0x9215)}, /* Acer Gobi 2000 Modem device (VP413) */
{USB_DEVICE(0x05c6, 0x9264)}, /* Asus Gobi 2000 QDL device (VR305) */
{USB_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */
{USB_DEVICE(0x05c6, 0x9234)}, /* Top Global Gobi 2000 QDL device (VR306) */
{USB_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */
{USB_DEVICE(0x05c6, 0x9274)}, /* iRex Technologies Gobi 2000 QDL device (VR307) */
{USB_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */
{USB_DEVICE(0x1199, 0x9000)}, /* Sierra Wireless Gobi 2000 QDL device (VT773) */
{USB_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{USB_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{USB_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{USB_DEVICE(0x1199, 0x9004)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{USB_DEVICE(0x1199, 0x9005)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{USB_DEVICE(0x1199, 0x9006)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{USB_DEVICE(0x1199, 0x9007)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{USB_DEVICE(0x1199, 0x9008)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{USB_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{USB_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
USB: Serial: Add device ID for Sierra Wireless MC8305 A new device ID pair is added for Sierra Wireless MC8305. Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-09 18:37:49 +07:00
{USB_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */
USB: qcserial: add new device ids This patch adds various USB device IDs for Gobi 2000 devices, as found in the drivers available at https://www.codeaurora.org/wiki/GOBI_Releases Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-10 18:36:43 +07:00
{USB_DEVICE(0x16d8, 0x8001)}, /* CMDTech Gobi 2000 QDL device (VU922) */
{USB_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
USB: qcserial: Add support for Qualcomm Gobi 2000 devices Add ids for Qualcomm Gobi 2000 QDL and Modem modes. Gobi 2000 has a single altsetting in QDL mode, so adapt code to handle that. Firmware upload protocol is also slightly different, with an additional firmware file. However, qcserial doesn't handle firmware uploading. Tested on Lenovo Thinkpad T510. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01 23:31:10 +07:00
{USB_DEVICE(0x05c6, 0x9204)}, /* Gobi 2000 QDL device */
{USB_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
USB: qcserial: add several new serial devices Signed-off-by: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-02-02 04:07:17 +07:00
USB: qcserial: don't grab QMI port on Gobi 1000 devices Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-25 02:08:43 +07:00
/* Gobi 3000 devices */
{USB_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Gobi 3000 QDL */
USB: qcserial: add several new serial devices Signed-off-by: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-02-02 04:07:17 +07:00
{USB_DEVICE(0x05c6, 0x920c)}, /* Gobi 3000 QDL */
{USB_DEVICE(0x05c6, 0x920d)}, /* Gobi 3000 Composite */
{USB_DEVICE(0x1410, 0xa020)}, /* Novatel Gobi 3000 QDL */
{USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */
{USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */
{USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */
USB: serial: qcserial: add Dell DW5570 QDL The Dell DW5570 is a re-branded Sierra Wireless MC8805 which will by default boot with vid 0x413c and pid 0x81a3. When triggered QDL download mode, the device switches to pid 0x81a6 and provides the standard TTY used for firmware upgrade. Cc: <stable@vger.kernel.org> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-19 03:31:31 +07:00
{USB_DEVICE(0x413c, 0x81a6)}, /* Dell DW5570 QDL (MC8805) */
USB: qcserial: adding Sierra Wireless devices The QMI mode of the Sierra Wireless MC7710 is close to a Gobi device, and also identified as one by the Windows drivers provided by Sony. The serial interfaces are the same as for any other Gobi module, but the USB interface layout is different: 0: DM/DIAG (also present in bootloader mode) 2: NMEA 3: AT-capable modem port 8: QMI/net 19: QMI/net (not always present) 20: QMI/net (not always present) Note in particular that the NMEA and AT ports are reversed compared to a Gobi 2k+ device, and that the DM port appears as a QDL port in bootloader mode using the same device ID. The Sony driver also document two new devices with standard Gobi 2k+ layout (1199:68a5, 1199:68a9) having a QDL mode (1199:68a4, 1199:68a8). Adding these as well. Lenovo Windows drivers document the USB interface layout for a few additional Sierra Wireless devices. Adding these while at it: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with the same layout as MC7710 - MC7750 (114f:68a2) with the same layout as MC7710 - EM7700 (1199:901c) with the same layout as MC7710 Cc: Anton Samokhvalov <pg83@yandex.ru> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:40 +07:00
{USB_DEVICE(0x1199, 0x68a4)}, /* Sierra Wireless QDL */
{USB_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */
{USB_DEVICE(0x1199, 0x68a8)}, /* Sierra Wireless QDL */
{USB_DEVICE(0x1199, 0x68a9)}, /* Sierra Wireless Modem */
USB: qcserial: Add Sierra Wireless device IDs Some additional IDs found in the BSD/GPL licensed out-of-tree GobiSerial driver from Sierra Wireless. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-24 16:19:04 +07:00
{USB_DEVICE(0x1199, 0x9010)}, /* Sierra Wireless Gobi 3000 QDL */
{USB_DEVICE(0x1199, 0x9012)}, /* Sierra Wireless Gobi 3000 QDL */
USB: qcserial: Add support for Sierra Wireless MC8355/Gobi 3000 Simple patch to make qcserial recognize the USB id of the Sierra Wireless MC8355 which is based on the Gobi 3000 chip. Both UMTS and GPS work fine. Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-21 01:50:51 +07:00
{USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
USB: qcserial: Add Sierra Wireless device IDs Some additional IDs found in the BSD/GPL licensed out-of-tree GobiSerial driver from Sierra Wireless. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-24 16:19:04 +07:00
{USB_DEVICE(0x1199, 0x9014)}, /* Sierra Wireless Gobi 3000 QDL */
{USB_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
{USB_DEVICE(0x1199, 0x9018)}, /* Sierra Wireless Gobi 3000 QDL */
{USB_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
USB: qcserial: adding Sierra Wireless devices The QMI mode of the Sierra Wireless MC7710 is close to a Gobi device, and also identified as one by the Windows drivers provided by Sony. The serial interfaces are the same as for any other Gobi module, but the USB interface layout is different: 0: DM/DIAG (also present in bootloader mode) 2: NMEA 3: AT-capable modem port 8: QMI/net 19: QMI/net (not always present) 20: QMI/net (not always present) Note in particular that the NMEA and AT ports are reversed compared to a Gobi 2k+ device, and that the DM port appears as a QDL port in bootloader mode using the same device ID. The Sony driver also document two new devices with standard Gobi 2k+ layout (1199:68a5, 1199:68a9) having a QDL mode (1199:68a4, 1199:68a8). Adding these as well. Lenovo Windows drivers document the USB interface layout for a few additional Sierra Wireless devices. Adding these while at it: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with the same layout as MC7710 - MC7750 (114f:68a2) with the same layout as MC7710 - EM7700 (1199:901c) with the same layout as MC7710 Cc: Anton Samokhvalov <pg83@yandex.ru> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:40 +07:00
{USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */
USB: qcserial: add several new serial devices Signed-off-by: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-02-02 04:07:17 +07:00
{USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */
{USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */
USB: serial: Add Option GTM681W to qcserial device table. The Option GTM681W uses a qualcomm chip and can be served by the qcserial device driver. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-24 17:01:51 +07:00
{USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */
USB: qcserial: adding Sierra Wireless devices The QMI mode of the Sierra Wireless MC7710 is close to a Gobi device, and also identified as one by the Windows drivers provided by Sony. The serial interfaces are the same as for any other Gobi module, but the USB interface layout is different: 0: DM/DIAG (also present in bootloader mode) 2: NMEA 3: AT-capable modem port 8: QMI/net 19: QMI/net (not always present) 20: QMI/net (not always present) Note in particular that the NMEA and AT ports are reversed compared to a Gobi 2k+ device, and that the DM port appears as a QDL port in bootloader mode using the same device ID. The Sony driver also document two new devices with standard Gobi 2k+ layout (1199:68a5, 1199:68a9) having a QDL mode (1199:68a4, 1199:68a8). Adding these as well. Lenovo Windows drivers document the USB interface layout for a few additional Sierra Wireless devices. Adding these while at it: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with the same layout as MC7710 - MC7750 (114f:68a2) with the same layout as MC7710 - EM7700 (1199:901c) with the same layout as MC7710 Cc: Anton Samokhvalov <pg83@yandex.ru> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:40 +07:00
usb: qcserial: define and use Sierra Wireless layout All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:45 +07:00
/* non-Gobi Sierra Wireless devices */
USB: qcserial: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module This is an HP-branded Sierra Wireless EM7355: https://bugzilla.redhat.com/show_bug.cgi?id=1223646#c2 Signed-off-by: David Ward <david.ward@ll.mit.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18 15:36:23 +07:00
{DEVICE_SWI(0x03f0, 0x4e1d)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
usb: qcserial: define and use Sierra Wireless layout All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:45 +07:00
{DEVICE_SWI(0x0f3d, 0x68a2)}, /* Sierra Wireless MC7700 */
{DEVICE_SWI(0x114f, 0x68a2)}, /* Sierra Wireless MC7750 */
{DEVICE_SWI(0x1199, 0x68a2)}, /* Sierra Wireless MC7710 */
USB: qcserial: update comment for Sierra Wireless MC7304/MC7354 This comment is ambiguous since there are other MC73xx devices with different USB IDs. This USB ID is found in the MC7304 and MC7354. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-16 23:28:01 +07:00
{DEVICE_SWI(0x1199, 0x68c0)}, /* Sierra Wireless MC7304/MC7354 */
usb: qcserial: define and use Sierra Wireless layout All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:45 +07:00
{DEVICE_SWI(0x1199, 0x901c)}, /* Sierra Wireless EM7700 */
{DEVICE_SWI(0x1199, 0x901f)}, /* Sierra Wireless EM7355 */
usb: qcserial: add additional Sierra Wireless QMI devices A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Link: http://marc.info/?l=linux-usb&m=140136310027293&w=2 Cc: <stable@vger.kernel.org> # backport in link above Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-29 18:33:27 +07:00
{DEVICE_SWI(0x1199, 0x9040)}, /* Sierra Wireless Modem */
Revert "USB: qcserial/option: make AT URCs work for Sierra Wireless MC7305/MC7355" This reverts commit 653cdc13a340ad1cef29f1bab0d05d0771fa1d57. The qcserial driver now enables the SET_CONTROL_LINE_STATE request so that AT URCs will work. Move these devices back to the qcserial driver, which is used for other devices in this series that follow the same layout. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-16 23:27:59 +07:00
{DEVICE_SWI(0x1199, 0x9041)}, /* Sierra Wireless MC7305/MC7355 */
usb: qcserial: define and use Sierra Wireless layout All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:45 +07:00
{DEVICE_SWI(0x1199, 0x9051)}, /* Netgear AirCard 340U */
usb: qcserial: add additional Sierra Wireless QMI devices A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Link: http://marc.info/?l=linux-usb&m=140136310027293&w=2 Cc: <stable@vger.kernel.org> # backport in link above Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-29 18:33:27 +07:00
{DEVICE_SWI(0x1199, 0x9053)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9054)}, /* Sierra Wireless Modem */
usb: qcserial: add Netgear AirCard 341U Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-29 02:13:51 +07:00
{DEVICE_SWI(0x1199, 0x9055)}, /* Netgear AirCard 341U */
usb: qcserial: add additional Sierra Wireless QMI devices A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Link: http://marc.info/?l=linux-usb&m=140136310027293&w=2 Cc: <stable@vger.kernel.org> # backport in link above Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-29 18:33:27 +07:00
{DEVICE_SWI(0x1199, 0x9056)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9060)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9061)}, /* Sierra Wireless Modem */
USB: serial: qcserial: new Sierra Wireless EM7305 device ID A new Sierra Wireless EM7305 device ID used in a Toshiba laptop. Reported-by: Petr Kloc <petr_kloc@yahoo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-06-14 00:11:42 +07:00
{DEVICE_SWI(0x1199, 0x9063)}, /* Sierra Wireless EM7305 */
USB: qcserial: add Sierra Wireless EM74xx device ID The MC74xx and EM74xx modules use different IDs by default, according to the Lenovo EM7455 driver for Windows. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-03-01 20:36:32 +07:00
{DEVICE_SWI(0x1199, 0x9070)}, /* Sierra Wireless MC74xx */
{DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx */
{DEVICE_SWI(0x1199, 0x9078)}, /* Sierra Wireless EM74xx */
{DEVICE_SWI(0x1199, 0x9079)}, /* Sierra Wireless EM74xx */
USB: serial: qcserial: add more Lenovo EM74xx device IDs In their infinite wisdom, and never ending quest for end user frustration, Lenovo has decided to use new USB device IDs for the wwan modules in their 2017 laptops. The actual hardware is still the Sierra Wireless EM7455 or EM7430, depending on region. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-05-17 21:30:50 +07:00
{DEVICE_SWI(0x1199, 0x907a)}, /* Sierra Wireless EM74xx QDL */
{DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */
usb: qcserial: define and use Sierra Wireless layout All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:45 +07:00
{DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a9)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
USB: qcserial: Add support for Dell Wireless 5809e 4G Modem Added the USB IDs 0x413c:0x81b1 for the "Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card", a Dell-branded Sierra Wireless EM7305 LTE card in M.2 form factor, used eg. in Dell's Latitude E7540 Notebook series. "lsusb -v" output for this device: Bus 002 Device 003: ID 413c:81b1 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x413c Dell Computer Corp. idProduct 0x81b1 bcdDevice 0.06 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Dell Wireless 5809e Gobi™ 4G LTE Mobile Broadband Card iSerial 3 bNumConfigurations 2 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 204 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000c 1x 12 bytes bInterval 9 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000c 1x 12 bytes bInterval 9 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 8 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 ** UNRECOGNIZED: 2c ff 42 49 53 54 00 01 07 f5 40 f6 00 00 00 00 01 f7 c4 09 02 f8 c4 09 03 f9 88 13 04 fa 10 27 05 fb 10 27 06 fc c4 09 07 fd c4 09 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 95 bNumInterfaces 2 bConfigurationValue 2 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 12 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 14 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 12 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 14 bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 12 bSlaveInterface 13 CDC MBIM: bcdMBIMVersion 1.00 wMaxControlMessage 4096 bNumberFilters 32 bMaxFilterSize 128 wMaxSegmentSize 1500 bmNetworkCapabilities 0x20 8-byte ntb input size CDC MBIM Extended: bcdMBIMExtendedVersion 1.00 bMaxOutstandingCommandMessages 64 wMTU 1500 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 9 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 13 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 13 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 2 Device Status: 0x0000 (Bus Powered) Signed-off-by: Pieter Hollants <pieter@hollants.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-07-20 16:56:17 +07:00
{DEVICE_SWI(0x413c, 0x81b1)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3) New revision of Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card has new idProduct. Bus 002 Device 006: ID 413c:81b3 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x413c Dell Computer Corp. idProduct 0x81b3 bcdDevice 0.06 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Dell Wireless 5809e Gobi™ 4G HSPA+ Mobile Broadband Card iSerial 3 bNumConfigurations 2 Signed-off-by: Patrik Halfar <patrik_halfar@halfarit.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-21 00:49:56 +07:00
{DEVICE_SWI(0x413c, 0x81b3)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
USB: serial: qcserial: add Dell DW5811e This is a Dell branded Sierra Wireless EM7455. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-17 23:21:28 +07:00
{DEVICE_SWI(0x413c, 0x81b5)}, /* Dell Wireless 5811e QDL */
{DEVICE_SWI(0x413c, 0x81b6)}, /* Dell Wireless 5811e QDL */
USB: qcserial: adding Sierra Wireless devices The QMI mode of the Sierra Wireless MC7710 is close to a Gobi device, and also identified as one by the Windows drivers provided by Sony. The serial interfaces are the same as for any other Gobi module, but the USB interface layout is different: 0: DM/DIAG (also present in bootloader mode) 2: NMEA 3: AT-capable modem port 8: QMI/net 19: QMI/net (not always present) 20: QMI/net (not always present) Note in particular that the NMEA and AT ports are reversed compared to a Gobi 2k+ device, and that the DM port appears as a QDL port in bootloader mode using the same device ID. The Sony driver also document two new devices with standard Gobi 2k+ layout (1199:68a5, 1199:68a9) having a QDL mode (1199:68a4, 1199:68a8). Adding these as well. Lenovo Windows drivers document the USB interface layout for a few additional Sierra Wireless devices. Adding these while at it: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with the same layout as MC7710 - MC7750 (114f:68a2) with the same layout as MC7710 - EM7700 (1199:901c) with the same layout as MC7710 Cc: Anton Samokhvalov <pg83@yandex.ru> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:40 +07:00
USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem Added new device layout "DEVICE_HWI" and also added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke <mardnh@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-17 03:17:30 +07:00
/* Huawei devices */
{DEVICE_HWI(0x03f0, 0x581d)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
USB: qcserial: Add support for Quectel EC20 Mini PCIe module It seems like this device has same vendor and product IDs as G2K devices, but it has different number of interfaces(4 vs 5) and also different interface layout which makes it currently unusable: usbcore: registered new interface driver qcserial usbserial: USB Serial support registered for Qualcomm USB modem usb 2-1.2: unknown number of interfaces: 5 lsusb output: Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Wireless Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x9215 Acer Gobi 2000 Wireless Modem bcdDevice 2.32 iManufacturer 1 Quectel iProduct 2 Quectel LTE Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 209 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Signed-off-by: Petr Štetiar <ynezz@true.cz> Cc: stable <stable@vger.kernel.org> [johan: rename define and add comment ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-03 17:25:28 +07:00
static int handle_quectel_ec20(struct device *dev, int ifnum)
{
int altsetting = 0;
/*
* Quectel EC20 Mini PCIe LTE module layout:
* 0: DM/DIAG (use libqcdm from ModemManager for communication)
* 1: NMEA
* 2: AT-capable modem port
* 3: Modem interface
* 4: NDIS
*/
switch (ifnum) {
case 0:
dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n");
break;
case 1:
dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n");
break;
case 2:
case 3:
dev_dbg(dev, "Quectel EC20 Modem port found\n");
break;
case 4:
/* Don't claim the QMI/net interface */
altsetting = -1;
break;
}
return altsetting;
}
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
{
USB: qcserial: Add support for Qualcomm Gobi 2000 devices Add ids for Qualcomm Gobi 2000 QDL and Modem modes. Gobi 2000 has a single altsetting in QDL mode, so adapt code to handle that. Firmware upload protocol is also slightly different, with an additional firmware file. However, qcserial doesn't handle firmware uploading. Tested on Lenovo Thinkpad T510. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01 23:31:10 +07:00
struct usb_host_interface *intf = serial->interface->cur_altsetting;
USB: qcserial.c: remove dbg() usage dbg() is a usb-serial specific macro. This patch converts the qcserial.c driver to use dev_dbg() instead to tie into the dynamic debug infrastructure. CC: Thomas Tuttle <ttuttle@chromium.org> CC: Alan Stern <stern@rowland.harvard.edu> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16 06:27:27 +07:00
struct device *dev = &serial->dev->dev;
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
int retval = -ENODEV;
__u8 nintf;
__u8 ifnum;
USB: qcserial: consolidate usb_set_interface calls No need to replicate the same code all over the place. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:36 +07:00
int altsetting = -1;
USB: qcserial: make AT URCs work for Sierra Wireless devices Three Sierra Wireless modems have been found to require the CDC ACM SET_CONTROL_LINE_STATE request on the AT port in order to receive unsolicited response codes, most recently the Dell Wireless 5808e (which is a re-branded Sierra Wireless EM7355). On the other hand, the Sierra Wireless MC7710 does not seem to need this request, but it was found to work either way. Use this request on the AT port of devices with the Sierra Wireless layout in the qcserial driver. The other modems that were moved to the option driver to work around this can now be moved back. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-16 23:27:58 +07:00
bool sendsetup = false;
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
USB: qcserial: Fix support for HP lt4112 LTE/HSPA+ Gobi 4G Modem The DEVICE_HWI type was added under the faulty assumption that Huawei devices based on Qualcomm chipsets and firmware use the static USB interface numbering known from Gobi devices. But this model does not apply to Huawei devices like the HP branded lt4112 (Huawei me906e). Huawei firmwares will dynamically assign interface numbers. Functions are renumbered when the firmware is reconfigured. Fix by changing the DEVICE_HWI type to use a simplified version of Huawei's subclass + protocol scheme: Blacklisting known network interface combinations and assuming the rest are serial. Reported-and-tested-by: Muri Nicanor <muri+libqmi@immerda.ch> Tested-by: Martin Hauke <mardnh@gmx.de> Cc: <stable@vger.kernel.org> Fixes: e7181d005e84 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-16 19:15:46 +07:00
/* we only support vendor specific functions */
if (intf->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
goto done;
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
nintf = serial->dev->actconfig->desc.bNumInterfaces;
USB: qcserial.c: remove dbg() usage dbg() is a usb-serial specific macro. This patch converts the qcserial.c driver to use dev_dbg() instead to tie into the dynamic debug infrastructure. CC: Thomas Tuttle <ttuttle@chromium.org> CC: Alan Stern <stern@rowland.harvard.edu> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16 06:27:27 +07:00
dev_dbg(dev, "Num Interfaces = %d\n", nintf);
USB: qcserial: Add support for Qualcomm Gobi 2000 devices Add ids for Qualcomm Gobi 2000 QDL and Modem modes. Gobi 2000 has a single altsetting in QDL mode, so adapt code to handle that. Firmware upload protocol is also slightly different, with an additional firmware file. However, qcserial doesn't handle firmware uploading. Tested on Lenovo Thinkpad T510. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01 23:31:10 +07:00
ifnum = intf->desc.bInterfaceNumber;
USB: qcserial.c: remove dbg() usage dbg() is a usb-serial specific macro. This patch converts the qcserial.c driver to use dev_dbg() instead to tie into the dynamic debug infrastructure. CC: Thomas Tuttle <ttuttle@chromium.org> CC: Alan Stern <stern@rowland.harvard.edu> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16 06:27:27 +07:00
dev_dbg(dev, "This Interface = %d\n", ifnum);
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
USB: qcserial: make probe more flexible Preparing qcprobe support for more than just strict Gobi 1k or 2k+ devices. Many newer Qualcomm based devices provide the same serial ports, but using varying USB interface layouts. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:38 +07:00
if (nintf == 1) {
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
/* QDL mode */
USB: qcserial: Add support for Qualcomm Gobi 2000 devices Add ids for Qualcomm Gobi 2000 QDL and Modem modes. Gobi 2000 has a single altsetting in QDL mode, so adapt code to handle that. Firmware upload protocol is also slightly different, with an additional firmware file. However, qcserial doesn't handle firmware uploading. Tested on Lenovo Thinkpad T510. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01 23:31:10 +07:00
/* Gobi 2000 has a single altsetting, older ones have two */
if (serial->interface->num_altsetting == 2)
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
intf = &serial->interface->altsetting[1];
USB: qcserial: Add support for Qualcomm Gobi 2000 devices Add ids for Qualcomm Gobi 2000 QDL and Modem modes. Gobi 2000 has a single altsetting in QDL mode, so adapt code to handle that. Firmware upload protocol is also slightly different, with an additional firmware file. However, qcserial doesn't handle firmware uploading. Tested on Lenovo Thinkpad T510. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01 23:31:10 +07:00
else if (serial->interface->num_altsetting > 2)
USB: qcserial: make probe more flexible Preparing qcprobe support for more than just strict Gobi 1k or 2k+ devices. Many newer Qualcomm based devices provide the same serial ports, but using varying USB interface layouts. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:38 +07:00
goto done;
USB: qcserial: Add support for Qualcomm Gobi 2000 devices Add ids for Qualcomm Gobi 2000 QDL and Modem modes. Gobi 2000 has a single altsetting in QDL mode, so adapt code to handle that. Firmware upload protocol is also slightly different, with an additional firmware file. However, qcserial doesn't handle firmware uploading. Tested on Lenovo Thinkpad T510. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01 23:31:10 +07:00
if (intf->desc.bNumEndpoints == 2 &&
usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
USB: qcserial.c: remove dbg() usage dbg() is a usb-serial specific macro. This patch converts the qcserial.c driver to use dev_dbg() instead to tie into the dynamic debug infrastructure. CC: Thomas Tuttle <ttuttle@chromium.org> CC: Alan Stern <stern@rowland.harvard.edu> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16 06:27:27 +07:00
dev_dbg(dev, "QDL port found\n");
USB: qcserial: Add support for Qualcomm Gobi 2000 devices Add ids for Qualcomm Gobi 2000 QDL and Modem modes. Gobi 2000 has a single altsetting in QDL mode, so adapt code to handle that. Firmware upload protocol is also slightly different, with an additional firmware file. However, qcserial doesn't handle firmware uploading. Tested on Lenovo Thinkpad T510. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01 23:31:10 +07:00
USB: qcserial: centralize probe exit path Creating a common exit path from qcprobe to make it easier to extend it. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:37 +07:00
if (serial->interface->num_altsetting == 1)
usb: qcserial avoid pointing to freed memory Rework the qcprobe logic such that serial->private is not set when qcprobe exits with -ENODEV, otherwise serial->private will point to freed memory on -ENODEV Signed-off-by: Steven Hardy <shardy@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-04 23:59:55 +07:00
retval = 0; /* Success */
USB: qcserial: centralize probe exit path Creating a common exit path from qcprobe to make it easier to extend it. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:37 +07:00
else
altsetting = 1;
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
}
USB: qcserial: make probe more flexible Preparing qcprobe support for more than just strict Gobi 1k or 2k+ devices. Many newer Qualcomm based devices provide the same serial ports, but using varying USB interface layouts. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:38 +07:00
goto done;
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
USB: qcserial: make probe more flexible Preparing qcprobe support for more than just strict Gobi 1k or 2k+ devices. Many newer Qualcomm based devices provide the same serial ports, but using varying USB interface layouts. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:38 +07:00
}
/* default to enabling interface */
altsetting = 0;
USB: qcserial: don't grab QMI port on Gobi 1000 devices Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-25 02:08:43 +07:00
usb: qcserial: fix multiline comment coding style Use a consistent style for all multiline comments. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:43 +07:00
/*
* Composite mode; don't bind to the QMI/net interface as that
USB: qcserial: fix port handling on Gobi 1K and 2K+ Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-24 02:26:07 +07:00
* gets handled by other drivers.
*/
usb: qcserial: refactor device layout selection Preparing for more supported standard device layouts. Keeping the matching macros unchanged to avoid breaking stable backporting of new device additions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:44 +07:00
switch (id->driver_info) {
case QCSERIAL_G1K:
usb: qcserial: fix multiline comment coding style Use a consistent style for all multiline comments. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:43 +07:00
/*
* Gobi 1K USB layout:
qcserial: bind to DM/DIAG port on Gobi 1K devices Turns out we just need altsetting 1 and then we can talk to it. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-13 21:58:18 +07:00
* 0: DM/DIAG (use libqcdm from ModemManager for communication)
USB: qcserial: don't grab QMI port on Gobi 1000 devices Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-25 02:08:43 +07:00
* 1: serial port (doesn't respond)
* 2: AT-capable modem port
* 3: QMI/net
USB: qcserial: fix port handling on Gobi 1K and 2K+ Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-24 02:26:07 +07:00
*/
usb: qcserial: define and use Sierra Wireless layout All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:45 +07:00
if (nintf < 3 || nintf > 4) {
dev_err(dev, "unknown number of interfaces: %d\n", nintf);
altsetting = -1;
goto done;
}
qcserial: bind to DM/DIAG port on Gobi 1K devices Turns out we just need altsetting 1 and then we can talk to it. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-13 21:58:18 +07:00
if (ifnum == 0) {
dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
altsetting = 1;
} else if (ifnum == 2)
USB: qcserial: fix port handling on Gobi 1K and 2K+ Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-24 02:26:07 +07:00
dev_dbg(dev, "Modem port found\n");
else
altsetting = -1;
usb: qcserial: refactor device layout selection Preparing for more supported standard device layouts. Keeping the matching macros unchanged to avoid breaking stable backporting of new device additions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:44 +07:00
break;
case QCSERIAL_G2K:
USB: qcserial: Add support for Quectel EC20 Mini PCIe module It seems like this device has same vendor and product IDs as G2K devices, but it has different number of interfaces(4 vs 5) and also different interface layout which makes it currently unusable: usbcore: registered new interface driver qcserial usbserial: USB Serial support registered for Qualcomm USB modem usb 2-1.2: unknown number of interfaces: 5 lsusb output: Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Wireless Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x9215 Acer Gobi 2000 Wireless Modem bcdDevice 2.32 iManufacturer 1 Quectel iProduct 2 Quectel LTE Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 209 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Signed-off-by: Petr Štetiar <ynezz@true.cz> Cc: stable <stable@vger.kernel.org> [johan: rename define and add comment ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-03 17:25:28 +07:00
/* handle non-standard layouts */
if (nintf == 5 && id->idProduct == QUECTEL_EC20_PID) {
altsetting = handle_quectel_ec20(dev, ifnum);
goto done;
}
usb: qcserial: fix multiline comment coding style Use a consistent style for all multiline comments. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:43 +07:00
/*
* Gobi 2K+ USB layout:
USB: qcserial: don't grab QMI port on Gobi 1000 devices Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-25 02:08:43 +07:00
* 0: QMI/net
* 1: DM/DIAG (use libqcdm from ModemManager for communication)
* 2: AT-capable modem port
* 3: NMEA
*/
usb: qcserial: define and use Sierra Wireless layout All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:45 +07:00
if (nintf < 3 || nintf > 4) {
dev_err(dev, "unknown number of interfaces: %d\n", nintf);
altsetting = -1;
goto done;
}
USB: qcserial: fix port handling on Gobi 1K and 2K+ Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-24 02:26:07 +07:00
switch (ifnum) {
case 0:
/* Don't claim the QMI/net interface */
USB: qcserial: make probe more flexible Preparing qcprobe support for more than just strict Gobi 1k or 2k+ devices. Many newer Qualcomm based devices provide the same serial ports, but using varying USB interface layouts. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:38 +07:00
altsetting = -1;
USB: qcserial: fix port handling on Gobi 1K and 2K+ Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-24 02:26:07 +07:00
break;
case 1:
USB: qcserial.c: remove dbg() usage dbg() is a usb-serial specific macro. This patch converts the qcserial.c driver to use dev_dbg() instead to tie into the dynamic debug infrastructure. CC: Thomas Tuttle <ttuttle@chromium.org> CC: Alan Stern <stern@rowland.harvard.edu> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16 06:27:27 +07:00
dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n");
USB: qcserial: fix port handling on Gobi 1K and 2K+ Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-24 02:26:07 +07:00
break;
case 2:
dev_dbg(dev, "Modem port found\n");
break;
case 3:
USB: qcserial: Enable Diagnostics Monitor and GPS ports on Gobi 2000 this patch to qcserial.c enables the Diagnostics Monitor and NMEA GPS ports on Qualcomm Gobi 2000 devices. A Gobi 2000 device will provide 3 serial ports: # /dev/ttyUSB0 -> Diagnostics # /dev/ttyUSB1 -> 3G Modem # /dev/ttyUSB2 -> NMEA GPS port * The Diagnostics Monitor uses Qualcomm's DM protocol; I used libqcdm (ModemManager) to talk to it, found it working, but at least DM commands 12 and 64 are not implemented on my device (Gobi 2000 built into Thinkpad x100e). * Functionality of the 3G Modem port remains unchanged. * The GPS port and how to enable it has been confirmed now in the Gobi 3000 source code at: https://www.codeaurora.org/patches/quic/gobi/ Enable/disable GPS via: echo "\$GPS_START" > /dev/ttyUSB2 # use GPS echo "\$GPS_STOP" > /dev/ttyUSB2 Signed-off-by: Matthias G. Eckermann <mge@arcor.de>
2010-09-24 23:12:01 +07:00
/*
* NMEA (serial line 9600 8N1)
* # echo "\$GPS_START" > /dev/ttyUSBx
* # echo "\$GPS_STOP" > /dev/ttyUSBx
*/
USB: qcserial.c: remove dbg() usage dbg() is a usb-serial specific macro. This patch converts the qcserial.c driver to use dev_dbg() instead to tie into the dynamic debug infrastructure. CC: Thomas Tuttle <ttuttle@chromium.org> CC: Alan Stern <stern@rowland.harvard.edu> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16 06:27:27 +07:00
dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
USB: qcserial: fix port handling on Gobi 1K and 2K+ Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-24 02:26:07 +07:00
break;
}
usb: qcserial: refactor device layout selection Preparing for more supported standard device layouts. Keeping the matching macros unchanged to avoid breaking stable backporting of new device additions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:44 +07:00
break;
usb: qcserial: define and use Sierra Wireless layout All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:45 +07:00
case QCSERIAL_SWI:
/*
* Sierra Wireless layout:
* 0: DM/DIAG (use libqcdm from ModemManager for communication)
* 2: NMEA
* 3: AT-capable modem port
* 8: QMI/net
*/
switch (ifnum) {
case 0:
dev_dbg(dev, "DM/DIAG interface found\n");
break;
case 2:
dev_dbg(dev, "NMEA GPS interface found\n");
break;
case 3:
dev_dbg(dev, "Modem port found\n");
USB: qcserial: make AT URCs work for Sierra Wireless devices Three Sierra Wireless modems have been found to require the CDC ACM SET_CONTROL_LINE_STATE request on the AT port in order to receive unsolicited response codes, most recently the Dell Wireless 5808e (which is a re-branded Sierra Wireless EM7355). On the other hand, the Sierra Wireless MC7710 does not seem to need this request, but it was found to work either way. Use this request on the AT port of devices with the Sierra Wireless layout in the qcserial driver. The other modems that were moved to the option driver to work around this can now be moved back. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-16 23:27:58 +07:00
sendsetup = true;
usb: qcserial: define and use Sierra Wireless layout All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:45 +07:00
break;
default:
/* don't claim any unsupported interface */
altsetting = -1;
break;
}
break;
USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem Added new device layout "DEVICE_HWI" and also added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke <mardnh@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-17 03:17:30 +07:00
case QCSERIAL_HWI:
/*
USB: qcserial: Fix support for HP lt4112 LTE/HSPA+ Gobi 4G Modem The DEVICE_HWI type was added under the faulty assumption that Huawei devices based on Qualcomm chipsets and firmware use the static USB interface numbering known from Gobi devices. But this model does not apply to Huawei devices like the HP branded lt4112 (Huawei me906e). Huawei firmwares will dynamically assign interface numbers. Functions are renumbered when the firmware is reconfigured. Fix by changing the DEVICE_HWI type to use a simplified version of Huawei's subclass + protocol scheme: Blacklisting known network interface combinations and assuming the rest are serial. Reported-and-tested-by: Muri Nicanor <muri+libqmi@immerda.ch> Tested-by: Martin Hauke <mardnh@gmx.de> Cc: <stable@vger.kernel.org> Fixes: e7181d005e84 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-16 19:15:46 +07:00
* Huawei devices map functions by subclass + protocol
* instead of interface numbers. The protocol identify
* a specific function, while the subclass indicate a
* specific firmware source
*
* This is a blacklist of functions known to be
* non-serial. The rest are assumed to be serial and
* will be handled by this driver
USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem Added new device layout "DEVICE_HWI" and also added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke <mardnh@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-17 03:17:30 +07:00
*/
USB: qcserial: Fix support for HP lt4112 LTE/HSPA+ Gobi 4G Modem The DEVICE_HWI type was added under the faulty assumption that Huawei devices based on Qualcomm chipsets and firmware use the static USB interface numbering known from Gobi devices. But this model does not apply to Huawei devices like the HP branded lt4112 (Huawei me906e). Huawei firmwares will dynamically assign interface numbers. Functions are renumbered when the firmware is reconfigured. Fix by changing the DEVICE_HWI type to use a simplified version of Huawei's subclass + protocol scheme: Blacklisting known network interface combinations and assuming the rest are serial. Reported-and-tested-by: Muri Nicanor <muri+libqmi@immerda.ch> Tested-by: Martin Hauke <mardnh@gmx.de> Cc: <stable@vger.kernel.org> Fixes: e7181d005e84 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-16 19:15:46 +07:00
switch (intf->desc.bInterfaceProtocol) {
/* QMI combined (qmi_wwan) */
case 0x07:
case 0x37:
case 0x67:
/* QMI data (qmi_wwan) */
case 0x08:
case 0x38:
case 0x68:
/* QMI control (qmi_wwan) */
case 0x09:
case 0x39:
case 0x69:
/* NCM like (huawei_cdc_ncm) */
case 0x16:
case 0x46:
case 0x76:
USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem Added new device layout "DEVICE_HWI" and also added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke <mardnh@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-17 03:17:30 +07:00
altsetting = -1;
break;
USB: qcserial: Fix support for HP lt4112 LTE/HSPA+ Gobi 4G Modem The DEVICE_HWI type was added under the faulty assumption that Huawei devices based on Qualcomm chipsets and firmware use the static USB interface numbering known from Gobi devices. But this model does not apply to Huawei devices like the HP branded lt4112 (Huawei me906e). Huawei firmwares will dynamically assign interface numbers. Functions are renumbered when the firmware is reconfigured. Fix by changing the DEVICE_HWI type to use a simplified version of Huawei's subclass + protocol scheme: Blacklisting known network interface combinations and assuming the rest are serial. Reported-and-tested-by: Muri Nicanor <muri+libqmi@immerda.ch> Tested-by: Martin Hauke <mardnh@gmx.de> Cc: <stable@vger.kernel.org> Fixes: e7181d005e84 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-16 19:15:46 +07:00
default:
dev_dbg(dev, "Huawei type serial port found (%02x/%02x/%02x)\n",
intf->desc.bInterfaceClass,
intf->desc.bInterfaceSubClass,
intf->desc.bInterfaceProtocol);
USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem Added new device layout "DEVICE_HWI" and also added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke <mardnh@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-17 03:17:30 +07:00
}
break;
usb: qcserial: refactor device layout selection Preparing for more supported standard device layouts. Keeping the matching macros unchanged to avoid breaking stable backporting of new device additions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-27 21:47:44 +07:00
default:
dev_err(dev, "unsupported device layout type: %lu\n",
id->driver_info);
break;
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
}
USB: qcserial: make probe more flexible Preparing qcprobe support for more than just strict Gobi 1k or 2k+ devices. Many newer Qualcomm based devices provide the same serial ports, but using varying USB interface layouts. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:38 +07:00
done:
USB: qcserial: consolidate usb_set_interface calls No need to replicate the same code all over the place. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-15 21:47:36 +07:00
if (altsetting >= 0) {
retval = usb_set_interface(serial->dev, ifnum, altsetting);
if (retval < 0) {
dev_err(dev,
"Could not set interface, error %d\n",
retval);
retval = -ENODEV;
}
}
USB: qcserial: make AT URCs work for Sierra Wireless devices Three Sierra Wireless modems have been found to require the CDC ACM SET_CONTROL_LINE_STATE request on the AT port in order to receive unsolicited response codes, most recently the Dell Wireless 5808e (which is a re-branded Sierra Wireless EM7355). On the other hand, the Sierra Wireless MC7710 does not seem to need this request, but it was found to work either way. Use this request on the AT port of devices with the Sierra Wireless layout in the qcserial driver. The other modems that were moved to the option driver to work around this can now be moved back. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-16 23:27:58 +07:00
if (!retval)
usb_set_serial_data(serial, (void *)(unsigned long)sendsetup);
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
return retval;
}
USB: qcserial: fix interface-data memory leak in error path Move interface data allocation to attach so that it is deallocated should usb-serial probe fail. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-25 20:42:41 +07:00
static int qc_attach(struct usb_serial *serial)
{
struct usb_wwan_intf_private *data;
USB: qcserial: make AT URCs work for Sierra Wireless devices Three Sierra Wireless modems have been found to require the CDC ACM SET_CONTROL_LINE_STATE request on the AT port in order to receive unsolicited response codes, most recently the Dell Wireless 5808e (which is a re-branded Sierra Wireless EM7355). On the other hand, the Sierra Wireless MC7710 does not seem to need this request, but it was found to work either way. Use this request on the AT port of devices with the Sierra Wireless layout in the qcserial driver. The other modems that were moved to the option driver to work around this can now be moved back. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-16 23:27:58 +07:00
bool sendsetup;
USB: qcserial: fix interface-data memory leak in error path Move interface data allocation to attach so that it is deallocated should usb-serial probe fail. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-25 20:42:41 +07:00
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
USB: qcserial: make AT URCs work for Sierra Wireless devices Three Sierra Wireless modems have been found to require the CDC ACM SET_CONTROL_LINE_STATE request on the AT port in order to receive unsolicited response codes, most recently the Dell Wireless 5808e (which is a re-branded Sierra Wireless EM7355). On the other hand, the Sierra Wireless MC7710 does not seem to need this request, but it was found to work either way. Use this request on the AT port of devices with the Sierra Wireless layout in the qcserial driver. The other modems that were moved to the option driver to work around this can now be moved back. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-16 23:27:58 +07:00
sendsetup = !!(unsigned long)(usb_get_serial_data(serial));
if (sendsetup)
data->use_send_setup = 1;
USB: qcserial: fix interface-data memory leak in error path Move interface data allocation to attach so that it is deallocated should usb-serial probe fail. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-25 20:42:41 +07:00
spin_lock_init(&data->susp_lock);
usb_set_serial_data(serial, data);
return 0;
}
usb: Fix qcserial memory leak on rmmod qcprobe function allocates serial->private but this is never freed, this patch adds a new function qc_release() which frees serial->private, after calling usb_wwan_release Signed-off-by: Steven Hardy <shardy@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-04 23:57:37 +07:00
static void qc_release(struct usb_serial *serial)
{
struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
usb_set_serial_data(serial, NULL);
kfree(priv);
}
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
static struct usb_serial_driver qcdevice = {
.driver = {
.owner = THIS_MODULE,
.name = "qcserial",
},
.description = "Qualcomm USB modem",
.id_table = id_table,
.num_ports = 1,
.probe = qcprobe,
USB: qcserial: Use generic USB wwan code Make qcserial use the generic USB wwan code. This should result in a performance improvement. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01 23:31:09 +07:00
.open = usb_wwan_open,
.close = usb_wwan_close,
USB: qcserial: make AT URCs work for Sierra Wireless devices Three Sierra Wireless modems have been found to require the CDC ACM SET_CONTROL_LINE_STATE request on the AT port in order to receive unsolicited response codes, most recently the Dell Wireless 5808e (which is a re-branded Sierra Wireless EM7355). On the other hand, the Sierra Wireless MC7710 does not seem to need this request, but it was found to work either way. Use this request on the AT port of devices with the Sierra Wireless layout in the qcserial driver. The other modems that were moved to the option driver to work around this can now be moved back. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-16 23:27:58 +07:00
.dtr_rts = usb_wwan_dtr_rts,
USB: qcserial: Use generic USB wwan code Make qcserial use the generic USB wwan code. This should result in a performance improvement. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01 23:31:09 +07:00
.write = usb_wwan_write,
.write_room = usb_wwan_write_room,
.chars_in_buffer = usb_wwan_chars_in_buffer,
USB: serial: qcserial: expose methods for modem control The qcserial driver fails to expose the .tiocmget and .tiocmset methods available from usb_wwan. These methods are required by ioctl commands dealing with the modem control signals DTR, RTS, etc. With these methods not set ioctl calls intended to control the DTR state will fail. For example, pppd drops and raises DTR in preparation to dialing the modem, which handles the case of the modem already being connected by making it hang up and return to command mode. DTR control being unavailable will lead to a protracted failure to connect as the modem will be stuck in a state not responsive to command. I have tested that with this patch the described case is handled successfully. There is an analogous method for .ioctl available from usb_wwan (as used in option.c) but I conservatively omitted that for lack of familiarity. Signed-off-by: Magnus Lynch <maglyx@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-06-13 01:52:41 +07:00
.tiocmget = usb_wwan_tiocmget,
.tiocmset = usb_wwan_tiocmset,
USB: qcserial: fix interface-data memory leak in error path Move interface data allocation to attach so that it is deallocated should usb-serial probe fail. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-25 20:42:41 +07:00
.attach = qc_attach,
usb: Fix qcserial memory leak on rmmod qcprobe function allocates serial->private but this is never freed, this patch adds a new function qc_release() which frees serial->private, after calling usb_wwan_release Signed-off-by: Steven Hardy <shardy@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-04 23:57:37 +07:00
.release = qc_release,
USB: usb-wwan: fix multiple memory leaks in error paths Fix port-data memory leak in usb-serial probe error path by moving port data allocation to port_probe. Since commit a1028f0abf ("usb: usb_wwan: replace release and disconnect with a port_remove hook") port data is deallocated in port_remove. This leaves a possibility for memory leaks if usb-serial probe fails after attach but before the port in question has been successfully registered. Note that this patch also fixes two additional memory leaks in the error path of attach should port initialisation fail for any port as the urbs were never freed and neither was the data of any of the successfully initialised ports. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-25 15:29:16 +07:00
.port_probe = usb_wwan_port_probe,
usb: usb_wwan: replace release and disconnect with a port_remove hook Doing port specific cleanup in the .port_remove hook is a lot simpler and safer than doing it in the USB driver .release or .disconnect methods. The removal of the port from the usb-serial bus will happen before the USB driver cleanup, so we must be careful about accessing port specific driver data from any USB driver functions. This problem surfaced after the commit 0998d0631 device-core: Ensure drvdata = NULL when no driver is bound which turned the previous unsafe access into a reliable NULL pointer dereference. Fixes the following Oops: [ 243.148471] BUG: unable to handle kernel NULL pointer dereference at (null) [ 243.148508] IP: [<ffffffffa0468527>] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.148556] PGD 79d60067 PUD 79d61067 PMD 0 [ 243.148590] Oops: 0000 [#1] SMP [ 243.148617] Modules linked in: sr_mod cdrom qmi_wwan usbnet option cdc_wdm usb_wwan usbserial usb_storage uas fuse af_packet ip6table_filter ip6_tables iptable_filter ip_tables x_tables tun edd cpufreq_conservative cpufreq_userspace cpufreq_powersave snd_pcm_oss snd_mixer_oss acpi_cpufreq snd_seq mperf snd_seq_device coretemp arc4 sg hp_wmi sparse_keymap uvcvideo videobuf2_core videodev videobuf2_vmalloc videobuf2_memops rtl8192ce rtl8192c_common rtlwifi joydev pcspkr microcode mac80211 i2c_i801 lpc_ich r8169 snd_hda_codec_idt cfg80211 snd_hda_intel snd_hda_codec rfkill snd_hwdep snd_pcm wmi snd_timer ac snd soundcore snd_page_alloc battery uhci_hcd i915 drm_kms_helper drm i2c_algo_bit ehci_hcd thermal usbcore video usb_common button processor thermal_sys [ 243.149007] CPU 1 [ 243.149027] Pid: 135, comm: khubd Not tainted 3.5.0-rc7-next-20120720-1-vanilla #1 Hewlett-Packard HP Mini 110-3700 /1584 [ 243.149072] RIP: 0010:[<ffffffffa0468527>] [<ffffffffa0468527>] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.149118] RSP: 0018:ffff880037e75b30 EFLAGS: 00010286 [ 243.149133] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88005912aa28 [ 243.149150] RDX: ffff88005e95f028 RSI: 0000000000000000 RDI: ffff88005f7c1a10 [ 243.149166] RBP: ffff880037e75b60 R08: 0000000000000000 R09: ffffffff812cea90 [ 243.149182] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88006539b440 [ 243.149198] R13: ffff88006539b440 R14: 0000000000000000 R15: 0000000000000000 [ 243.149216] FS: 0000000000000000(0000) GS:ffff88007ee80000(0000) knlGS:0000000000000000 [ 243.149233] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 243.149248] CR2: 0000000000000000 CR3: 0000000079fe0000 CR4: 00000000000007e0 [ 243.149264] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 243.149280] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 243.149298] Process khubd (pid: 135, threadinfo ffff880037e74000, task ffff880037d40600) [ 243.149313] Stack: [ 243.149323] ffff880037e75b40 ffff88006539b440 ffff8800799bc830 ffff88005f7c1800 [ 243.149348] 0000000000000001 ffff88006539b448 ffff880037e75b70 ffffffffa04685e9 [ 243.149371] ffff880037e75bc0 ffffffffa0473765 ffff880037354988 ffff88007b594800 [ 243.149395] Call Trace: [ 243.149419] [<ffffffffa04685e9>] usb_wwan_disconnect+0x9/0x10 [usb_wwan] [ 243.149447] [<ffffffffa0473765>] usb_serial_disconnect+0xd5/0x120 [usbserial] [ 243.149511] [<ffffffffa0046b48>] usb_unbind_interface+0x58/0x1a0 [usbcore] [ 243.149545] [<ffffffff8139ebd7>] __device_release_driver+0x77/0xe0 [ 243.149567] [<ffffffff8139ec67>] device_release_driver+0x27/0x40 [ 243.149587] [<ffffffff8139e5cf>] bus_remove_device+0xdf/0x150 [ 243.149608] [<ffffffff8139bc78>] device_del+0x118/0x1a0 [ 243.149661] [<ffffffffa0044590>] usb_disable_device+0xb0/0x280 [usbcore] [ 243.149718] [<ffffffffa003c6fd>] usb_disconnect+0x9d/0x140 [usbcore] [ 243.149770] [<ffffffffa003da7d>] hub_port_connect_change+0xad/0x8a0 [usbcore] [ 243.149825] [<ffffffffa0043bf5>] ? usb_control_msg+0xe5/0x110 [usbcore] [ 243.149878] [<ffffffffa003e6e3>] hub_events+0x473/0x760 [usbcore] [ 243.149931] [<ffffffffa003ea05>] hub_thread+0x35/0x1d0 [usbcore] [ 243.149955] [<ffffffff81061960>] ? add_wait_queue+0x60/0x60 [ 243.150004] [<ffffffffa003e9d0>] ? hub_events+0x760/0x760 [usbcore] [ 243.150026] [<ffffffff8106133e>] kthread+0x8e/0xa0 [ 243.150047] [<ffffffff8157ec04>] kernel_thread_helper+0x4/0x10 [ 243.150068] [<ffffffff810612b0>] ? flush_kthread_work+0x120/0x120 [ 243.150088] [<ffffffff8157ec00>] ? gs_change+0xb/0xb [ 243.150101] Code: fd 41 54 53 48 83 ec 08 80 7f 1a 00 74 57 49 89 fc 31 db 90 49 8b 7c 24 20 45 31 f6 48 81 c7 10 02 00 00 e8 bc 64 f3 e0 49 89 c7 <4b> 8b 3c 37 49 83 c6 08 e8 4c a5 bd ff 49 83 fe 20 75 ed 45 30 [ 243.150257] RIP [<ffffffffa0468527>] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.150282] RSP <ffff880037e75b30> [ 243.150294] CR2: 0000000000000000 [ 243.177170] ---[ end trace fba433d9015ffb8c ]--- Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Thomas Schäfer <tschaefer@t-online.de> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-27 06:11:41 +07:00
.port_remove = usb_wwan_port_remove,
USB: qcserial: Use generic USB wwan code Make qcserial use the generic USB wwan code. This should result in a performance improvement. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01 23:31:09 +07:00
#ifdef CONFIG_PM
.suspend = usb_wwan_suspend,
.resume = usb_wwan_resume,
#endif
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
};
usb-serial: use new registration API in [q-s]* drivers This patch (as1528) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: qcaux, qcserial, safe_serial, siemens_mpi, sierra, spcp8x5, ssu100, and symbolserial. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 02:57:25 +07:00
static struct usb_serial_driver * const serial_drivers[] = {
&qcdevice, NULL
};
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
module_usb_serial_driver(serial_drivers, id_table);
USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu <tamml@qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-18 13:39:56 +07:00
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL v2");
Reference in New Issue Copy Permalink