linux_dsm_epyc7002/drivers/net/ethernet/mellanox/mlx4/fw.c

1623 lines
54 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
* Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
#include <linux/etherdevice.h>
#include <linux/mlx4/cmd.h>
#include <linux/module.h>
#include <linux/cache.h>
#include "fw.h"
#include "icm.h"
enum {
MLX4_COMMAND_INTERFACE_MIN_REV = 2,
MLX4_COMMAND_INTERFACE_MAX_REV = 3,
MLX4_COMMAND_INTERFACE_NEW_PORT_CMDS = 3,
};
extern void __buggy_use_of_MLX4_GET(void);
extern void __buggy_use_of_MLX4_PUT(void);
static bool enable_qos;
module_param(enable_qos, bool, 0444);
MODULE_PARM_DESC(enable_qos, "Enable Quality of Service support in the HCA (default: off)");
#define MLX4_GET(dest, source, offset) \
do { \
void *__p = (char *) (source) + (offset); \
switch (sizeof (dest)) { \
case 1: (dest) = *(u8 *) __p; break; \
case 2: (dest) = be16_to_cpup(__p); break; \
case 4: (dest) = be32_to_cpup(__p); break; \
case 8: (dest) = be64_to_cpup(__p); break; \
default: __buggy_use_of_MLX4_GET(); \
} \
} while (0)
#define MLX4_PUT(dest, source, offset) \
do { \
void *__d = ((char *) (dest) + (offset)); \
switch (sizeof(source)) { \
case 1: *(u8 *) __d = (source); break; \
case 2: *(__be16 *) __d = cpu_to_be16(source); break; \
case 4: *(__be32 *) __d = cpu_to_be32(source); break; \
case 8: *(__be64 *) __d = cpu_to_be64(source); break; \
default: __buggy_use_of_MLX4_PUT(); \
} \
} while (0)
static void dump_dev_cap_flags(struct mlx4_dev *dev, u64 flags)
{
static const char *fname[] = {
[ 0] = "RC transport",
[ 1] = "UC transport",
[ 2] = "UD transport",
[ 3] = "XRC transport",
[ 4] = "reliable multicast",
[ 5] = "FCoIB support",
[ 6] = "SRQ support",
[ 7] = "IPoIB checksum offload",
[ 8] = "P_Key violation counter",
[ 9] = "Q_Key violation counter",
[10] = "VMM",
[12] = "DPDP",
[15] = "Big LSO headers",
[16] = "MW support",
[17] = "APM support",
[18] = "Atomic ops support",
[19] = "Raw multicast support",
[20] = "Address vector port checking support",
[21] = "UD multicast support",
[24] = "Demand paging support",
[25] = "Router support",
[30] = "IBoE support",
[32] = "Unicast loopback support",
[34] = "FCS header control",
[38] = "Wake On LAN support",
[40] = "UDP RSS support",
[41] = "Unicast VEP steering support",
[42] = "Multicast VEP steering support",
[48] = "Counters support",
mlx4: Use port management change event instead of smp_snoop The port management change event can replace smp_snoop. If the capability bit for this event is set in dev-caps, the event is used (by the driver setting the PORT_MNG_CHG_EVENT bit in the async event mask in the MAP_EQ fw command). In this case, when the driver passes incoming SMP PORT_INFO SET mads to the FW, the FW generates port management change events to signal any changes to the driver. If the FW generates these events, smp_snoop shouldn't be invoked in ib_process_mad(), or duplicate events will occur (once from the FW-generated event, and once from smp_snoop). In the case where the FW does not generate port management change events smp_snoop needs to be invoked to create these events. The flow in smp_snoop has been modified to make use of the same procedures as in the fw-generated-event event case to generate the port management events (LID change, Client-rereg, Pkey change, and/or GID change). Port management change event handling required changing the mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument (last argument) had to be changed to unsigned long in order to accomodate passing the EQE pointer. We also needed to move the definition of struct mlx4_eqe from net/mlx4.h to file device.h -- to make it available to the IB driver, to handle port management change events. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 15:21:40 +07:00
[59] = "Port management change event support",
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 21:59:24 +07:00
[61] = "64 byte EQE support",
[62] = "64 byte CQE support",
};
int i;
mlx4_dbg(dev, "DEV_CAP flags:\n");
for (i = 0; i < ARRAY_SIZE(fname); ++i)
if (fname[i] && (flags & (1LL << i)))
mlx4_dbg(dev, " %s\n", fname[i]);
}
static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags)
{
static const char * const fname[] = {
[0] = "RSS support",
[1] = "RSS Toeplitz Hash Function support",
[2] = "RSS XOR Hash Function support",
[3] = "Device manage flow steering support"
};
int i;
for (i = 0; i < ARRAY_SIZE(fname); ++i)
if (fname[i] && (flags & (1LL << i)))
mlx4_dbg(dev, " %s\n", fname[i]);
}
int mlx4_MOD_STAT_CFG(struct mlx4_dev *dev, struct mlx4_mod_stat_cfg *cfg)
{
struct mlx4_cmd_mailbox *mailbox;
u32 *inbox;
int err = 0;
#define MOD_STAT_CFG_IN_SIZE 0x100
#define MOD_STAT_CFG_PG_SZ_M_OFFSET 0x002
#define MOD_STAT_CFG_PG_SZ_OFFSET 0x003
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
inbox = mailbox->buf;
memset(inbox, 0, MOD_STAT_CFG_IN_SIZE);
MLX4_PUT(inbox, cfg->log_pg_sz, MOD_STAT_CFG_PG_SZ_OFFSET);
MLX4_PUT(inbox, cfg->log_pg_sz_m, MOD_STAT_CFG_PG_SZ_M_OFFSET);
err = mlx4_cmd(dev, mailbox->dma, 0, 0, MLX4_CMD_MOD_STAT_CFG,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
mlx4_free_cmd_mailbox(dev, mailbox);
return err;
}
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
int mlx4_QUERY_FUNC_CAP_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
u8 field;
u32 size;
int err = 0;
#define QUERY_FUNC_CAP_FLAGS_OFFSET 0x0
#define QUERY_FUNC_CAP_NUM_PORTS_OFFSET 0x1
#define QUERY_FUNC_CAP_PF_BHVR_OFFSET 0x4
#define QUERY_FUNC_CAP_FMR_OFFSET 0x8
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
#define QUERY_FUNC_CAP_QP_QUOTA_OFFSET 0x10
#define QUERY_FUNC_CAP_CQ_QUOTA_OFFSET 0x14
#define QUERY_FUNC_CAP_SRQ_QUOTA_OFFSET 0x18
#define QUERY_FUNC_CAP_MPT_QUOTA_OFFSET 0x20
#define QUERY_FUNC_CAP_MTT_QUOTA_OFFSET 0x24
#define QUERY_FUNC_CAP_MCG_QUOTA_OFFSET 0x28
#define QUERY_FUNC_CAP_MAX_EQ_OFFSET 0x2c
#define QUERY_FUNC_CAP_RESERVED_EQ_OFFSET 0x30
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
#define QUERY_FUNC_CAP_FMR_FLAG 0x80
#define QUERY_FUNC_CAP_FLAG_RDMA 0x40
#define QUERY_FUNC_CAP_FLAG_ETH 0x80
/* when opcode modifier = 1 */
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
#define QUERY_FUNC_CAP_PHYS_PORT_OFFSET 0x3
#define QUERY_FUNC_CAP_RDMA_PROPS_OFFSET 0x8
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
#define QUERY_FUNC_CAP_ETH_PROPS_OFFSET 0xc
#define QUERY_FUNC_CAP_QP0_TUNNEL 0x10
#define QUERY_FUNC_CAP_QP0_PROXY 0x14
#define QUERY_FUNC_CAP_QP1_TUNNEL 0x18
#define QUERY_FUNC_CAP_QP1_PROXY 0x1c
#define QUERY_FUNC_CAP_ETH_PROPS_FORCE_MAC 0x40
#define QUERY_FUNC_CAP_ETH_PROPS_FORCE_VLAN 0x80
#define QUERY_FUNC_CAP_RDMA_PROPS_FORCE_PHY_WQE_GID 0x80
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
if (vhcr->op_modifier == 1) {
field = 0;
/* ensure force vlan and force mac bits are not set */
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_ETH_PROPS_OFFSET);
/* ensure that phy_wqe_gid bit is not set */
MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_RDMA_PROPS_OFFSET);
field = vhcr->in_modifier; /* phys-port = logical-port */
MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_PHYS_PORT_OFFSET);
/* size is now the QP number */
size = dev->phys_caps.base_tunnel_sqpn + 8 * slave + field - 1;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_QP0_TUNNEL);
size += 2;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_QP1_TUNNEL);
size = dev->phys_caps.base_proxy_sqpn + 8 * slave + field - 1;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_QP0_PROXY);
size += 2;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_QP1_PROXY);
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
} else if (vhcr->op_modifier == 0) {
/* enable rdma and ethernet interfaces */
field = (QUERY_FUNC_CAP_FLAG_ETH | QUERY_FUNC_CAP_FLAG_RDMA);
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_FLAGS_OFFSET);
field = dev->caps.num_ports;
MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_NUM_PORTS_OFFSET);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 21:59:24 +07:00
size = dev->caps.function_caps; /* set PF behaviours */
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_PF_BHVR_OFFSET);
field = 0; /* protected FMR support not available as yet */
MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_FMR_OFFSET);
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
size = dev->caps.num_qps;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_QP_QUOTA_OFFSET);
size = dev->caps.num_srqs;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_SRQ_QUOTA_OFFSET);
size = dev->caps.num_cqs;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_CQ_QUOTA_OFFSET);
size = dev->caps.num_eqs;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_MAX_EQ_OFFSET);
size = dev->caps.reserved_eqs;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_RESERVED_EQ_OFFSET);
size = dev->caps.num_mpts;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_MPT_QUOTA_OFFSET);
size = dev->caps.num_mtts;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_MTT_QUOTA_OFFSET);
size = dev->caps.num_mgms + dev->caps.num_amgms;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_MCG_QUOTA_OFFSET);
} else
err = -EINVAL;
return err;
}
int mlx4_QUERY_FUNC_CAP(struct mlx4_dev *dev, u32 gen_or_port,
struct mlx4_func_cap *func_cap)
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
{
struct mlx4_cmd_mailbox *mailbox;
u32 *outbox;
u8 field, op_modifier;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
u32 size;
int err = 0;
op_modifier = !!gen_or_port; /* 0 = general, 1 = logical port */
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
err = mlx4_cmd_box(dev, 0, mailbox->dma, gen_or_port, op_modifier,
MLX4_CMD_QUERY_FUNC_CAP,
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_WRAPPED);
if (err)
goto out;
outbox = mailbox->buf;
if (!op_modifier) {
MLX4_GET(field, outbox, QUERY_FUNC_CAP_FLAGS_OFFSET);
if (!(field & (QUERY_FUNC_CAP_FLAG_ETH | QUERY_FUNC_CAP_FLAG_RDMA))) {
mlx4_err(dev, "The host supports neither eth nor rdma interfaces\n");
err = -EPROTONOSUPPORT;
goto out;
}
func_cap->flags = field;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(field, outbox, QUERY_FUNC_CAP_NUM_PORTS_OFFSET);
func_cap->num_ports = field;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(size, outbox, QUERY_FUNC_CAP_PF_BHVR_OFFSET);
func_cap->pf_context_behaviour = size;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(size, outbox, QUERY_FUNC_CAP_QP_QUOTA_OFFSET);
func_cap->qp_quota = size & 0xFFFFFF;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(size, outbox, QUERY_FUNC_CAP_SRQ_QUOTA_OFFSET);
func_cap->srq_quota = size & 0xFFFFFF;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(size, outbox, QUERY_FUNC_CAP_CQ_QUOTA_OFFSET);
func_cap->cq_quota = size & 0xFFFFFF;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(size, outbox, QUERY_FUNC_CAP_MAX_EQ_OFFSET);
func_cap->max_eq = size & 0xFFFFFF;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(size, outbox, QUERY_FUNC_CAP_RESERVED_EQ_OFFSET);
func_cap->reserved_eq = size & 0xFFFFFF;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(size, outbox, QUERY_FUNC_CAP_MPT_QUOTA_OFFSET);
func_cap->mpt_quota = size & 0xFFFFFF;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(size, outbox, QUERY_FUNC_CAP_MTT_QUOTA_OFFSET);
func_cap->mtt_quota = size & 0xFFFFFF;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(size, outbox, QUERY_FUNC_CAP_MCG_QUOTA_OFFSET);
func_cap->mcg_quota = size & 0xFFFFFF;
goto out;
}
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
/* logical port query */
if (gen_or_port > dev->caps.num_ports) {
err = -EINVAL;
goto out;
}
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
if (dev->caps.port_type[gen_or_port] == MLX4_PORT_TYPE_ETH) {
MLX4_GET(field, outbox, QUERY_FUNC_CAP_ETH_PROPS_OFFSET);
if (field & QUERY_FUNC_CAP_ETH_PROPS_FORCE_VLAN) {
mlx4_err(dev, "VLAN is enforced on this port\n");
err = -EPROTONOSUPPORT;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
goto out;
}
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
if (field & QUERY_FUNC_CAP_ETH_PROPS_FORCE_MAC) {
mlx4_err(dev, "Force mac is enabled on this port\n");
err = -EPROTONOSUPPORT;
goto out;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
}
} else if (dev->caps.port_type[gen_or_port] == MLX4_PORT_TYPE_IB) {
MLX4_GET(field, outbox, QUERY_FUNC_CAP_RDMA_PROPS_OFFSET);
if (field & QUERY_FUNC_CAP_RDMA_PROPS_FORCE_PHY_WQE_GID) {
mlx4_err(dev, "phy_wqe_gid is "
"enforced on this ib port\n");
err = -EPROTONOSUPPORT;
goto out;
}
}
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(field, outbox, QUERY_FUNC_CAP_PHYS_PORT_OFFSET);
func_cap->physical_port = field;
if (func_cap->physical_port != gen_or_port) {
err = -ENOSYS;
goto out;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
}
MLX4_GET(size, outbox, QUERY_FUNC_CAP_QP0_TUNNEL);
func_cap->qp0_tunnel_qpn = size & 0xFFFFFF;
MLX4_GET(size, outbox, QUERY_FUNC_CAP_QP0_PROXY);
func_cap->qp0_proxy_qpn = size & 0xFFFFFF;
MLX4_GET(size, outbox, QUERY_FUNC_CAP_QP1_TUNNEL);
func_cap->qp1_tunnel_qpn = size & 0xFFFFFF;
MLX4_GET(size, outbox, QUERY_FUNC_CAP_QP1_PROXY);
func_cap->qp1_proxy_qpn = size & 0xFFFFFF;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
/* All other resources are allocated by the master, but we still report
* 'num' and 'reserved' capabilities as follows:
* - num remains the maximum resource index
* - 'num - reserved' is the total available objects of a resource, but
* resource indices may be less than 'reserved'
* TODO: set per-resource quotas */
out:
mlx4_free_cmd_mailbox(dev, mailbox);
return err;
}
int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
{
struct mlx4_cmd_mailbox *mailbox;
u32 *outbox;
u8 field;
u32 field32, flags, ext_flags;
u16 size;
u16 stat_rate;
int err;
int i;
#define QUERY_DEV_CAP_OUT_SIZE 0x100
#define QUERY_DEV_CAP_MAX_SRQ_SZ_OFFSET 0x10
#define QUERY_DEV_CAP_MAX_QP_SZ_OFFSET 0x11
#define QUERY_DEV_CAP_RSVD_QP_OFFSET 0x12
#define QUERY_DEV_CAP_MAX_QP_OFFSET 0x13
#define QUERY_DEV_CAP_RSVD_SRQ_OFFSET 0x14
#define QUERY_DEV_CAP_MAX_SRQ_OFFSET 0x15
#define QUERY_DEV_CAP_RSVD_EEC_OFFSET 0x16
#define QUERY_DEV_CAP_MAX_EEC_OFFSET 0x17
#define QUERY_DEV_CAP_MAX_CQ_SZ_OFFSET 0x19
#define QUERY_DEV_CAP_RSVD_CQ_OFFSET 0x1a
#define QUERY_DEV_CAP_MAX_CQ_OFFSET 0x1b
#define QUERY_DEV_CAP_MAX_MPT_OFFSET 0x1d
#define QUERY_DEV_CAP_RSVD_EQ_OFFSET 0x1e
#define QUERY_DEV_CAP_MAX_EQ_OFFSET 0x1f
#define QUERY_DEV_CAP_RSVD_MTT_OFFSET 0x20
#define QUERY_DEV_CAP_MAX_MRW_SZ_OFFSET 0x21
#define QUERY_DEV_CAP_RSVD_MRW_OFFSET 0x22
#define QUERY_DEV_CAP_MAX_MTT_SEG_OFFSET 0x23
#define QUERY_DEV_CAP_MAX_AV_OFFSET 0x27
#define QUERY_DEV_CAP_MAX_REQ_QP_OFFSET 0x29
#define QUERY_DEV_CAP_MAX_RES_QP_OFFSET 0x2b
#define QUERY_DEV_CAP_MAX_GSO_OFFSET 0x2d
#define QUERY_DEV_CAP_RSS_OFFSET 0x2e
#define QUERY_DEV_CAP_MAX_RDMA_OFFSET 0x2f
#define QUERY_DEV_CAP_RSZ_SRQ_OFFSET 0x33
#define QUERY_DEV_CAP_ACK_DELAY_OFFSET 0x35
#define QUERY_DEV_CAP_MTU_WIDTH_OFFSET 0x36
#define QUERY_DEV_CAP_VL_PORT_OFFSET 0x37
#define QUERY_DEV_CAP_MAX_MSG_SZ_OFFSET 0x38
#define QUERY_DEV_CAP_MAX_GID_OFFSET 0x3b
#define QUERY_DEV_CAP_RATE_SUPPORT_OFFSET 0x3c
#define QUERY_DEV_CAP_MAX_PKEY_OFFSET 0x3f
#define QUERY_DEV_CAP_EXT_FLAGS_OFFSET 0x40
#define QUERY_DEV_CAP_FLAGS_OFFSET 0x44
#define QUERY_DEV_CAP_RSVD_UAR_OFFSET 0x48
#define QUERY_DEV_CAP_UAR_SZ_OFFSET 0x49
#define QUERY_DEV_CAP_PAGE_SZ_OFFSET 0x4b
#define QUERY_DEV_CAP_BF_OFFSET 0x4c
#define QUERY_DEV_CAP_LOG_BF_REG_SZ_OFFSET 0x4d
#define QUERY_DEV_CAP_LOG_MAX_BF_REGS_PER_PAGE_OFFSET 0x4e
#define QUERY_DEV_CAP_LOG_MAX_BF_PAGES_OFFSET 0x4f
#define QUERY_DEV_CAP_MAX_SG_SQ_OFFSET 0x51
#define QUERY_DEV_CAP_MAX_DESC_SZ_SQ_OFFSET 0x52
#define QUERY_DEV_CAP_MAX_SG_RQ_OFFSET 0x55
#define QUERY_DEV_CAP_MAX_DESC_SZ_RQ_OFFSET 0x56
#define QUERY_DEV_CAP_MAX_QP_MCG_OFFSET 0x61
#define QUERY_DEV_CAP_RSVD_MCG_OFFSET 0x62
#define QUERY_DEV_CAP_MAX_MCG_OFFSET 0x63
#define QUERY_DEV_CAP_RSVD_PD_OFFSET 0x64
#define QUERY_DEV_CAP_MAX_PD_OFFSET 0x65
#define QUERY_DEV_CAP_RSVD_XRC_OFFSET 0x66
#define QUERY_DEV_CAP_MAX_XRC_OFFSET 0x67
#define QUERY_DEV_CAP_MAX_COUNTERS_OFFSET 0x68
#define QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET 0x76
#define QUERY_DEV_CAP_FLOW_STEERING_MAX_QP_OFFSET 0x77
#define QUERY_DEV_CAP_RDMARC_ENTRY_SZ_OFFSET 0x80
#define QUERY_DEV_CAP_QPC_ENTRY_SZ_OFFSET 0x82
#define QUERY_DEV_CAP_AUX_ENTRY_SZ_OFFSET 0x84
#define QUERY_DEV_CAP_ALTC_ENTRY_SZ_OFFSET 0x86
#define QUERY_DEV_CAP_EQC_ENTRY_SZ_OFFSET 0x88
#define QUERY_DEV_CAP_CQC_ENTRY_SZ_OFFSET 0x8a
#define QUERY_DEV_CAP_SRQ_ENTRY_SZ_OFFSET 0x8c
#define QUERY_DEV_CAP_C_MPT_ENTRY_SZ_OFFSET 0x8e
#define QUERY_DEV_CAP_MTT_ENTRY_SZ_OFFSET 0x90
#define QUERY_DEV_CAP_D_MPT_ENTRY_SZ_OFFSET 0x92
#define QUERY_DEV_CAP_BMME_FLAGS_OFFSET 0x94
#define QUERY_DEV_CAP_RSVD_LKEY_OFFSET 0x98
#define QUERY_DEV_CAP_MAX_ICM_SZ_OFFSET 0xa0
dev_cap->flags2 = 0;
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
outbox = mailbox->buf;
err = mlx4_cmd_box(dev, 0, mailbox->dma, 0, 0, MLX4_CMD_QUERY_DEV_CAP,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
if (err)
goto out;
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_QP_OFFSET);
dev_cap->reserved_qps = 1 << (field & 0xf);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_QP_OFFSET);
dev_cap->max_qps = 1 << (field & 0x1f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_SRQ_OFFSET);
dev_cap->reserved_srqs = 1 << (field >> 4);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_SRQ_OFFSET);
dev_cap->max_srqs = 1 << (field & 0x1f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_CQ_SZ_OFFSET);
dev_cap->max_cq_sz = 1 << field;
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_CQ_OFFSET);
dev_cap->reserved_cqs = 1 << (field & 0xf);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_CQ_OFFSET);
dev_cap->max_cqs = 1 << (field & 0x1f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_MPT_OFFSET);
dev_cap->max_mpts = 1 << (field & 0x3f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_EQ_OFFSET);
dev_cap->reserved_eqs = field & 0xf;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_EQ_OFFSET);
dev_cap->max_eqs = 1 << (field & 0xf);
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_MTT_OFFSET);
dev_cap->reserved_mtts = 1 << (field >> 4);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_MRW_SZ_OFFSET);
dev_cap->max_mrw_sz = 1 << field;
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_MRW_OFFSET);
dev_cap->reserved_mrws = 1 << (field & 0xf);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_MTT_SEG_OFFSET);
dev_cap->max_mtt_seg = 1 << (field & 0x3f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_REQ_QP_OFFSET);
dev_cap->max_requester_per_qp = 1 << (field & 0x3f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_RES_QP_OFFSET);
dev_cap->max_responder_per_qp = 1 << (field & 0x3f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_GSO_OFFSET);
field &= 0x1f;
if (!field)
dev_cap->max_gso_sz = 0;
else
dev_cap->max_gso_sz = 1 << field;
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSS_OFFSET);
if (field & 0x20)
dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_RSS_XOR;
if (field & 0x10)
dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_RSS_TOP;
field &= 0xf;
if (field) {
dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_RSS;
dev_cap->max_rss_tbl_sz = 1 << field;
} else
dev_cap->max_rss_tbl_sz = 0;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_RDMA_OFFSET);
dev_cap->max_rdma_global = 1 << (field & 0x3f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_ACK_DELAY_OFFSET);
dev_cap->local_ca_ack_delay = field & 0x1f;
MLX4_GET(field, outbox, QUERY_DEV_CAP_VL_PORT_OFFSET);
dev_cap->num_ports = field & 0xf;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_MSG_SZ_OFFSET);
dev_cap->max_msg_sz = 1 << (field & 0x1f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET);
if (field & 0x80)
dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_FS_EN;
dev_cap->fs_log_max_ucast_qp_range_size = field & 0x1f;
MLX4_GET(field, outbox, QUERY_DEV_CAP_FLOW_STEERING_MAX_QP_OFFSET);
dev_cap->fs_max_num_qp_per_entry = field;
MLX4_GET(stat_rate, outbox, QUERY_DEV_CAP_RATE_SUPPORT_OFFSET);
dev_cap->stat_rate_support = stat_rate;
MLX4_GET(ext_flags, outbox, QUERY_DEV_CAP_EXT_FLAGS_OFFSET);
MLX4_GET(flags, outbox, QUERY_DEV_CAP_FLAGS_OFFSET);
dev_cap->flags = flags | (u64)ext_flags << 32;
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_UAR_OFFSET);
dev_cap->reserved_uars = field >> 4;
MLX4_GET(field, outbox, QUERY_DEV_CAP_UAR_SZ_OFFSET);
dev_cap->uar_size = 1 << ((field & 0x3f) + 20);
MLX4_GET(field, outbox, QUERY_DEV_CAP_PAGE_SZ_OFFSET);
dev_cap->min_page_sz = 1 << field;
MLX4_GET(field, outbox, QUERY_DEV_CAP_BF_OFFSET);
if (field & 0x80) {
MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_BF_REG_SZ_OFFSET);
dev_cap->bf_reg_size = 1 << (field & 0x1f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_MAX_BF_REGS_PER_PAGE_OFFSET);
if ((1 << (field & 0x3f)) > (PAGE_SIZE / dev_cap->bf_reg_size))
field = 3;
dev_cap->bf_regs_per_page = 1 << (field & 0x3f);
mlx4_dbg(dev, "BlueFlame available (reg size %d, regs/page %d)\n",
dev_cap->bf_reg_size, dev_cap->bf_regs_per_page);
} else {
dev_cap->bf_reg_size = 0;
mlx4_dbg(dev, "BlueFlame not available\n");
}
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_SG_SQ_OFFSET);
dev_cap->max_sq_sg = field;
MLX4_GET(size, outbox, QUERY_DEV_CAP_MAX_DESC_SZ_SQ_OFFSET);
dev_cap->max_sq_desc_sz = size;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_QP_MCG_OFFSET);
dev_cap->max_qp_per_mcg = 1 << field;
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_MCG_OFFSET);
dev_cap->reserved_mgms = field & 0xf;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_MCG_OFFSET);
dev_cap->max_mcgs = 1 << field;
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_PD_OFFSET);
dev_cap->reserved_pds = field >> 4;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_PD_OFFSET);
dev_cap->max_pds = 1 << (field & 0x3f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_XRC_OFFSET);
dev_cap->reserved_xrcds = field >> 4;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_XRC_OFFSET);
dev_cap->max_xrcds = 1 << (field & 0x1f);
MLX4_GET(size, outbox, QUERY_DEV_CAP_RDMARC_ENTRY_SZ_OFFSET);
dev_cap->rdmarc_entry_sz = size;
MLX4_GET(size, outbox, QUERY_DEV_CAP_QPC_ENTRY_SZ_OFFSET);
dev_cap->qpc_entry_sz = size;
MLX4_GET(size, outbox, QUERY_DEV_CAP_AUX_ENTRY_SZ_OFFSET);
dev_cap->aux_entry_sz = size;
MLX4_GET(size, outbox, QUERY_DEV_CAP_ALTC_ENTRY_SZ_OFFSET);
dev_cap->altc_entry_sz = size;
MLX4_GET(size, outbox, QUERY_DEV_CAP_EQC_ENTRY_SZ_OFFSET);
dev_cap->eqc_entry_sz = size;
MLX4_GET(size, outbox, QUERY_DEV_CAP_CQC_ENTRY_SZ_OFFSET);
dev_cap->cqc_entry_sz = size;
MLX4_GET(size, outbox, QUERY_DEV_CAP_SRQ_ENTRY_SZ_OFFSET);
dev_cap->srq_entry_sz = size;
MLX4_GET(size, outbox, QUERY_DEV_CAP_C_MPT_ENTRY_SZ_OFFSET);
dev_cap->cmpt_entry_sz = size;
MLX4_GET(size, outbox, QUERY_DEV_CAP_MTT_ENTRY_SZ_OFFSET);
dev_cap->mtt_entry_sz = size;
MLX4_GET(size, outbox, QUERY_DEV_CAP_D_MPT_ENTRY_SZ_OFFSET);
dev_cap->dmpt_entry_sz = size;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_SRQ_SZ_OFFSET);
dev_cap->max_srq_sz = 1 << field;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_QP_SZ_OFFSET);
dev_cap->max_qp_sz = 1 << field;
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSZ_SRQ_OFFSET);
dev_cap->resize_srq = field & 1;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_SG_RQ_OFFSET);
dev_cap->max_rq_sg = field;
MLX4_GET(size, outbox, QUERY_DEV_CAP_MAX_DESC_SZ_RQ_OFFSET);
dev_cap->max_rq_desc_sz = size;
MLX4_GET(dev_cap->bmme_flags, outbox,
QUERY_DEV_CAP_BMME_FLAGS_OFFSET);
MLX4_GET(dev_cap->reserved_lkey, outbox,
QUERY_DEV_CAP_RSVD_LKEY_OFFSET);
MLX4_GET(dev_cap->max_icm_sz, outbox,
QUERY_DEV_CAP_MAX_ICM_SZ_OFFSET);
if (dev_cap->flags & MLX4_DEV_CAP_FLAG_COUNTERS)
MLX4_GET(dev_cap->max_counters, outbox,
QUERY_DEV_CAP_MAX_COUNTERS_OFFSET);
if (dev->flags & MLX4_FLAG_OLD_PORT_CMDS) {
for (i = 1; i <= dev_cap->num_ports; ++i) {
MLX4_GET(field, outbox, QUERY_DEV_CAP_VL_PORT_OFFSET);
dev_cap->max_vl[i] = field >> 4;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MTU_WIDTH_OFFSET);
dev_cap->ib_mtu[i] = field >> 4;
dev_cap->max_port_width[i] = field & 0xf;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_GID_OFFSET);
dev_cap->max_gids[i] = 1 << (field & 0xf);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_PKEY_OFFSET);
dev_cap->max_pkeys[i] = 1 << (field & 0xf);
}
} else {
#define QUERY_PORT_SUPPORTED_TYPE_OFFSET 0x00
#define QUERY_PORT_MTU_OFFSET 0x01
#define QUERY_PORT_ETH_MTU_OFFSET 0x02
#define QUERY_PORT_WIDTH_OFFSET 0x06
#define QUERY_PORT_MAX_GID_PKEY_OFFSET 0x07
#define QUERY_PORT_MAX_MACVLAN_OFFSET 0x0a
#define QUERY_PORT_MAX_VL_OFFSET 0x0b
#define QUERY_PORT_MAC_OFFSET 0x10
#define QUERY_PORT_TRANS_VENDOR_OFFSET 0x18
#define QUERY_PORT_WAVELENGTH_OFFSET 0x1c
#define QUERY_PORT_TRANS_CODE_OFFSET 0x20
for (i = 1; i <= dev_cap->num_ports; ++i) {
err = mlx4_cmd_box(dev, 0, mailbox->dma, i, 0, MLX4_CMD_QUERY_PORT,
MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE);
if (err)
goto out;
MLX4_GET(field, outbox, QUERY_PORT_SUPPORTED_TYPE_OFFSET);
dev_cap->supported_port_types[i] = field & 3;
dev_cap->suggested_type[i] = (field >> 3) & 1;
dev_cap->default_sense[i] = (field >> 4) & 1;
MLX4_GET(field, outbox, QUERY_PORT_MTU_OFFSET);
dev_cap->ib_mtu[i] = field & 0xf;
MLX4_GET(field, outbox, QUERY_PORT_WIDTH_OFFSET);
dev_cap->max_port_width[i] = field & 0xf;
MLX4_GET(field, outbox, QUERY_PORT_MAX_GID_PKEY_OFFSET);
dev_cap->max_gids[i] = 1 << (field >> 4);
dev_cap->max_pkeys[i] = 1 << (field & 0xf);
MLX4_GET(field, outbox, QUERY_PORT_MAX_VL_OFFSET);
dev_cap->max_vl[i] = field & 0xf;
MLX4_GET(field, outbox, QUERY_PORT_MAX_MACVLAN_OFFSET);
dev_cap->log_max_macs[i] = field & 0xf;
dev_cap->log_max_vlans[i] = field >> 4;
MLX4_GET(dev_cap->eth_mtu[i], outbox, QUERY_PORT_ETH_MTU_OFFSET);
MLX4_GET(dev_cap->def_mac[i], outbox, QUERY_PORT_MAC_OFFSET);
MLX4_GET(field32, outbox, QUERY_PORT_TRANS_VENDOR_OFFSET);
dev_cap->trans_type[i] = field32 >> 24;
dev_cap->vendor_oui[i] = field32 & 0xffffff;
MLX4_GET(dev_cap->wavelength[i], outbox, QUERY_PORT_WAVELENGTH_OFFSET);
MLX4_GET(dev_cap->trans_code[i], outbox, QUERY_PORT_TRANS_CODE_OFFSET);
}
}
mlx4_dbg(dev, "Base MM extensions: flags %08x, rsvd L_Key %08x\n",
dev_cap->bmme_flags, dev_cap->reserved_lkey);
/*
* Each UAR has 4 EQ doorbells; so if a UAR is reserved, then
* we can't use any EQs whose doorbell falls on that page,
* even if the EQ itself isn't reserved.
*/
dev_cap->reserved_eqs = max(dev_cap->reserved_uars * 4,
dev_cap->reserved_eqs);
mlx4_dbg(dev, "Max ICM size %lld MB\n",
(unsigned long long) dev_cap->max_icm_sz >> 20);
mlx4_dbg(dev, "Max QPs: %d, reserved QPs: %d, entry size: %d\n",
dev_cap->max_qps, dev_cap->reserved_qps, dev_cap->qpc_entry_sz);
mlx4_dbg(dev, "Max SRQs: %d, reserved SRQs: %d, entry size: %d\n",
dev_cap->max_srqs, dev_cap->reserved_srqs, dev_cap->srq_entry_sz);
mlx4_dbg(dev, "Max CQs: %d, reserved CQs: %d, entry size: %d\n",
dev_cap->max_cqs, dev_cap->reserved_cqs, dev_cap->cqc_entry_sz);
mlx4_dbg(dev, "Max EQs: %d, reserved EQs: %d, entry size: %d\n",
dev_cap->max_eqs, dev_cap->reserved_eqs, dev_cap->eqc_entry_sz);
mlx4_dbg(dev, "reserved MPTs: %d, reserved MTTs: %d\n",
dev_cap->reserved_mrws, dev_cap->reserved_mtts);
mlx4_dbg(dev, "Max PDs: %d, reserved PDs: %d, reserved UARs: %d\n",
dev_cap->max_pds, dev_cap->reserved_pds, dev_cap->reserved_uars);
mlx4_dbg(dev, "Max QP/MCG: %d, reserved MGMs: %d\n",
dev_cap->max_pds, dev_cap->reserved_mgms);
mlx4_dbg(dev, "Max CQEs: %d, max WQEs: %d, max SRQ WQEs: %d\n",
dev_cap->max_cq_sz, dev_cap->max_qp_sz, dev_cap->max_srq_sz);
mlx4_dbg(dev, "Local CA ACK delay: %d, max MTU: %d, port width cap: %d\n",
dev_cap->local_ca_ack_delay, 128 << dev_cap->ib_mtu[1],
dev_cap->max_port_width[1]);
mlx4_dbg(dev, "Max SQ desc size: %d, max SQ S/G: %d\n",
dev_cap->max_sq_desc_sz, dev_cap->max_sq_sg);
mlx4_dbg(dev, "Max RQ desc size: %d, max RQ S/G: %d\n",
dev_cap->max_rq_desc_sz, dev_cap->max_rq_sg);
mlx4_dbg(dev, "Max GSO size: %d\n", dev_cap->max_gso_sz);
mlx4_dbg(dev, "Max counters: %d\n", dev_cap->max_counters);
mlx4_dbg(dev, "Max RSS Table size: %d\n", dev_cap->max_rss_tbl_sz);
dump_dev_cap_flags(dev, dev_cap->flags);
dump_dev_cap_flags2(dev, dev_cap->flags2);
out:
mlx4_free_cmd_mailbox(dev, mailbox);
return err;
}
int mlx4_QUERY_DEV_CAP_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
u64 flags;
int err = 0;
u8 field;
err = mlx4_cmd_box(dev, 0, outbox->dma, 0, 0, MLX4_CMD_QUERY_DEV_CAP,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
if (err)
return err;
/* add port mng change event capability unconditionally to slaves */
MLX4_GET(flags, outbox->buf, QUERY_DEV_CAP_EXT_FLAGS_OFFSET);
flags |= MLX4_DEV_CAP_FLAG_PORT_MNG_CHG_EV;
MLX4_PUT(outbox->buf, flags, QUERY_DEV_CAP_EXT_FLAGS_OFFSET);
/* For guests, report Blueflame disabled */
MLX4_GET(field, outbox->buf, QUERY_DEV_CAP_BF_OFFSET);
field &= 0x7f;
MLX4_PUT(outbox->buf, field, QUERY_DEV_CAP_BF_OFFSET);
return 0;
}
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
u64 def_mac;
u8 port_type;
u16 short_field;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
int err;
#define MLX4_VF_PORT_NO_LINK_SENSE_MASK 0xE0
#define QUERY_PORT_CUR_MAX_PKEY_OFFSET 0x0c
#define QUERY_PORT_CUR_MAX_GID_OFFSET 0x0e
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
err = mlx4_cmd_box(dev, 0, outbox->dma, vhcr->in_modifier, 0,
MLX4_CMD_QUERY_PORT, MLX4_CMD_TIME_CLASS_B,
MLX4_CMD_NATIVE);
if (!err && dev->caps.function != slave) {
/* set slave default_mac address */
MLX4_GET(def_mac, outbox->buf, QUERY_PORT_MAC_OFFSET);
def_mac += slave << 8;
MLX4_PUT(outbox->buf, def_mac, QUERY_PORT_MAC_OFFSET);
/* get port type - currently only eth is enabled */
MLX4_GET(port_type, outbox->buf,
QUERY_PORT_SUPPORTED_TYPE_OFFSET);
/* No link sensing allowed */
port_type &= MLX4_VF_PORT_NO_LINK_SENSE_MASK;
/* set port type to currently operating port type */
port_type |= (dev->caps.port_type[vhcr->in_modifier] & 0x3);
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_PUT(outbox->buf, port_type,
QUERY_PORT_SUPPORTED_TYPE_OFFSET);
short_field = 1; /* slave max gids */
MLX4_PUT(outbox->buf, short_field,
QUERY_PORT_CUR_MAX_GID_OFFSET);
short_field = dev->caps.pkey_table_len[vhcr->in_modifier];
MLX4_PUT(outbox->buf, short_field,
QUERY_PORT_CUR_MAX_PKEY_OFFSET);
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
}
return err;
}
int mlx4_get_slave_pkey_gid_tbl_len(struct mlx4_dev *dev, u8 port,
int *gid_tbl_len, int *pkey_tbl_len)
{
struct mlx4_cmd_mailbox *mailbox;
u32 *outbox;
u16 field;
int err;
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
err = mlx4_cmd_box(dev, 0, mailbox->dma, port, 0,
MLX4_CMD_QUERY_PORT, MLX4_CMD_TIME_CLASS_B,
MLX4_CMD_WRAPPED);
if (err)
goto out;
outbox = mailbox->buf;
MLX4_GET(field, outbox, QUERY_PORT_CUR_MAX_GID_OFFSET);
*gid_tbl_len = field;
MLX4_GET(field, outbox, QUERY_PORT_CUR_MAX_PKEY_OFFSET);
*pkey_tbl_len = field;
out:
mlx4_free_cmd_mailbox(dev, mailbox);
return err;
}
EXPORT_SYMBOL(mlx4_get_slave_pkey_gid_tbl_len);
int mlx4_map_cmd(struct mlx4_dev *dev, u16 op, struct mlx4_icm *icm, u64 virt)
{
struct mlx4_cmd_mailbox *mailbox;
struct mlx4_icm_iter iter;
__be64 *pages;
int lg;
int nent = 0;
int i;
int err = 0;
int ts = 0, tc = 0;
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
memset(mailbox->buf, 0, MLX4_MAILBOX_SIZE);
pages = mailbox->buf;
for (mlx4_icm_first(icm, &iter);
!mlx4_icm_last(&iter);
mlx4_icm_next(&iter)) {
/*
* We have to pass pages that are aligned to their
* size, so find the least significant 1 in the
* address or size and use that as our log2 size.
*/
lg = ffs(mlx4_icm_addr(&iter) | mlx4_icm_size(&iter)) - 1;
if (lg < MLX4_ICM_PAGE_SHIFT) {
mlx4_warn(dev, "Got FW area not aligned to %d (%llx/%lx).\n",
MLX4_ICM_PAGE_SIZE,
(unsigned long long) mlx4_icm_addr(&iter),
mlx4_icm_size(&iter));
err = -EINVAL;
goto out;
}
for (i = 0; i < mlx4_icm_size(&iter) >> lg; ++i) {
if (virt != -1) {
pages[nent * 2] = cpu_to_be64(virt);
virt += 1 << lg;
}
pages[nent * 2 + 1] =
cpu_to_be64((mlx4_icm_addr(&iter) + (i << lg)) |
(lg - MLX4_ICM_PAGE_SHIFT));
ts += 1 << (lg - 10);
++tc;
if (++nent == MLX4_MAILBOX_SIZE / 16) {
err = mlx4_cmd(dev, mailbox->dma, nent, 0, op,
MLX4_CMD_TIME_CLASS_B,
MLX4_CMD_NATIVE);
if (err)
goto out;
nent = 0;
}
}
}
if (nent)
err = mlx4_cmd(dev, mailbox->dma, nent, 0, op,
MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE);
if (err)
goto out;
switch (op) {
case MLX4_CMD_MAP_FA:
mlx4_dbg(dev, "Mapped %d chunks/%d KB for FW.\n", tc, ts);
break;
case MLX4_CMD_MAP_ICM_AUX:
mlx4_dbg(dev, "Mapped %d chunks/%d KB for ICM aux.\n", tc, ts);
break;
case MLX4_CMD_MAP_ICM:
mlx4_dbg(dev, "Mapped %d chunks/%d KB at %llx for ICM.\n",
tc, ts, (unsigned long long) virt - (ts << 10));
break;
}
out:
mlx4_free_cmd_mailbox(dev, mailbox);
return err;
}
int mlx4_MAP_FA(struct mlx4_dev *dev, struct mlx4_icm *icm)
{
return mlx4_map_cmd(dev, MLX4_CMD_MAP_FA, icm, -1);
}
int mlx4_UNMAP_FA(struct mlx4_dev *dev)
{
return mlx4_cmd(dev, 0, 0, 0, MLX4_CMD_UNMAP_FA,
MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE);
}
int mlx4_RUN_FW(struct mlx4_dev *dev)
{
return mlx4_cmd(dev, 0, 0, 0, MLX4_CMD_RUN_FW,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
}
int mlx4_QUERY_FW(struct mlx4_dev *dev)
{
struct mlx4_fw *fw = &mlx4_priv(dev)->fw;
struct mlx4_cmd *cmd = &mlx4_priv(dev)->cmd;
struct mlx4_cmd_mailbox *mailbox;
u32 *outbox;
int err = 0;
u64 fw_ver;
u16 cmd_if_rev;
u8 lg;
#define QUERY_FW_OUT_SIZE 0x100
#define QUERY_FW_VER_OFFSET 0x00
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
#define QUERY_FW_PPF_ID 0x09
#define QUERY_FW_CMD_IF_REV_OFFSET 0x0a
#define QUERY_FW_MAX_CMD_OFFSET 0x0f
#define QUERY_FW_ERR_START_OFFSET 0x30
#define QUERY_FW_ERR_SIZE_OFFSET 0x38
#define QUERY_FW_ERR_BAR_OFFSET 0x3c
#define QUERY_FW_SIZE_OFFSET 0x00
#define QUERY_FW_CLR_INT_BASE_OFFSET 0x20
#define QUERY_FW_CLR_INT_BAR_OFFSET 0x28
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
#define QUERY_FW_COMM_BASE_OFFSET 0x40
#define QUERY_FW_COMM_BAR_OFFSET 0x48
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
outbox = mailbox->buf;
err = mlx4_cmd_box(dev, 0, mailbox->dma, 0, 0, MLX4_CMD_QUERY_FW,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
if (err)
goto out;
MLX4_GET(fw_ver, outbox, QUERY_FW_VER_OFFSET);
/*
* FW subminor version is at more significant bits than minor
* version, so swap here.
*/
dev->caps.fw_ver = (fw_ver & 0xffff00000000ull) |
((fw_ver & 0xffff0000ull) >> 16) |
((fw_ver & 0x0000ffffull) << 16);
MLX4_GET(lg, outbox, QUERY_FW_PPF_ID);
dev->caps.function = lg;
if (mlx4_is_slave(dev))
goto out;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(cmd_if_rev, outbox, QUERY_FW_CMD_IF_REV_OFFSET);
if (cmd_if_rev < MLX4_COMMAND_INTERFACE_MIN_REV ||
cmd_if_rev > MLX4_COMMAND_INTERFACE_MAX_REV) {
mlx4_err(dev, "Installed FW has unsupported "
"command interface revision %d.\n",
cmd_if_rev);
mlx4_err(dev, "(Installed FW version is %d.%d.%03d)\n",
(int) (dev->caps.fw_ver >> 32),
(int) (dev->caps.fw_ver >> 16) & 0xffff,
(int) dev->caps.fw_ver & 0xffff);
mlx4_err(dev, "This driver version supports only revisions %d to %d.\n",
MLX4_COMMAND_INTERFACE_MIN_REV, MLX4_COMMAND_INTERFACE_MAX_REV);
err = -ENODEV;
goto out;
}
if (cmd_if_rev < MLX4_COMMAND_INTERFACE_NEW_PORT_CMDS)
dev->flags |= MLX4_FLAG_OLD_PORT_CMDS;
MLX4_GET(lg, outbox, QUERY_FW_MAX_CMD_OFFSET);
cmd->max_cmds = 1 << lg;
mlx4_dbg(dev, "FW version %d.%d.%03d (cmd intf rev %d), max commands %d\n",
(int) (dev->caps.fw_ver >> 32),
(int) (dev->caps.fw_ver >> 16) & 0xffff,
(int) dev->caps.fw_ver & 0xffff,
cmd_if_rev, cmd->max_cmds);
MLX4_GET(fw->catas_offset, outbox, QUERY_FW_ERR_START_OFFSET);
MLX4_GET(fw->catas_size, outbox, QUERY_FW_ERR_SIZE_OFFSET);
MLX4_GET(fw->catas_bar, outbox, QUERY_FW_ERR_BAR_OFFSET);
fw->catas_bar = (fw->catas_bar >> 6) * 2;
mlx4_dbg(dev, "Catastrophic error buffer at 0x%llx, size 0x%x, BAR %d\n",
(unsigned long long) fw->catas_offset, fw->catas_size, fw->catas_bar);
MLX4_GET(fw->fw_pages, outbox, QUERY_FW_SIZE_OFFSET);
MLX4_GET(fw->clr_int_base, outbox, QUERY_FW_CLR_INT_BASE_OFFSET);
MLX4_GET(fw->clr_int_bar, outbox, QUERY_FW_CLR_INT_BAR_OFFSET);
fw->clr_int_bar = (fw->clr_int_bar >> 6) * 2;
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
MLX4_GET(fw->comm_base, outbox, QUERY_FW_COMM_BASE_OFFSET);
MLX4_GET(fw->comm_bar, outbox, QUERY_FW_COMM_BAR_OFFSET);
fw->comm_bar = (fw->comm_bar >> 6) * 2;
mlx4_dbg(dev, "Communication vector bar:%d offset:0x%llx\n",
fw->comm_bar, fw->comm_base);
mlx4_dbg(dev, "FW size %d KB\n", fw->fw_pages >> 2);
/*
* Round up number of system pages needed in case
* MLX4_ICM_PAGE_SIZE < PAGE_SIZE.
*/
fw->fw_pages =
ALIGN(fw->fw_pages, PAGE_SIZE / MLX4_ICM_PAGE_SIZE) >>
(PAGE_SHIFT - MLX4_ICM_PAGE_SHIFT);
mlx4_dbg(dev, "Clear int @ %llx, BAR %d\n",
(unsigned long long) fw->clr_int_base, fw->clr_int_bar);
out:
mlx4_free_cmd_mailbox(dev, mailbox);
return err;
}
int mlx4_QUERY_FW_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
u8 *outbuf;
int err;
outbuf = outbox->buf;
err = mlx4_cmd_box(dev, 0, outbox->dma, 0, 0, MLX4_CMD_QUERY_FW,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
if (err)
return err;
/* for slaves, set pci PPF ID to invalid and zero out everything
* else except FW version */
outbuf[0] = outbuf[1] = 0;
memset(&outbuf[8], 0, QUERY_FW_OUT_SIZE - 8);
outbuf[QUERY_FW_PPF_ID] = MLX4_INVALID_SLAVE_ID;
return 0;
}
static void get_board_id(void *vsd, char *board_id)
{
int i;
#define VSD_OFFSET_SIG1 0x00
#define VSD_OFFSET_SIG2 0xde
#define VSD_OFFSET_MLX_BOARD_ID 0xd0
#define VSD_OFFSET_TS_BOARD_ID 0x20
#define VSD_SIGNATURE_TOPSPIN 0x5ad
memset(board_id, 0, MLX4_BOARD_ID_LEN);
if (be16_to_cpup(vsd + VSD_OFFSET_SIG1) == VSD_SIGNATURE_TOPSPIN &&
be16_to_cpup(vsd + VSD_OFFSET_SIG2) == VSD_SIGNATURE_TOPSPIN) {
strlcpy(board_id, vsd + VSD_OFFSET_TS_BOARD_ID, MLX4_BOARD_ID_LEN);
} else {
/*
* The board ID is a string but the firmware byte
* swaps each 4-byte word before passing it back to
* us. Therefore we need to swab it before printing.
*/
for (i = 0; i < 4; ++i)
((u32 *) board_id)[i] =
swab32(*(u32 *) (vsd + VSD_OFFSET_MLX_BOARD_ID + i * 4));
}
}
int mlx4_QUERY_ADAPTER(struct mlx4_dev *dev, struct mlx4_adapter *adapter)
{
struct mlx4_cmd_mailbox *mailbox;
u32 *outbox;
int err;
#define QUERY_ADAPTER_OUT_SIZE 0x100
#define QUERY_ADAPTER_INTA_PIN_OFFSET 0x10
#define QUERY_ADAPTER_VSD_OFFSET 0x20
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
outbox = mailbox->buf;
err = mlx4_cmd_box(dev, 0, mailbox->dma, 0, 0, MLX4_CMD_QUERY_ADAPTER,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
if (err)
goto out;
MLX4_GET(adapter->inta_pin, outbox, QUERY_ADAPTER_INTA_PIN_OFFSET);
get_board_id(outbox + QUERY_ADAPTER_VSD_OFFSET / 4,
adapter->board_id);
out:
mlx4_free_cmd_mailbox(dev, mailbox);
return err;
}
int mlx4_INIT_HCA(struct mlx4_dev *dev, struct mlx4_init_hca_param *param)
{
struct mlx4_cmd_mailbox *mailbox;
__be32 *inbox;
int err;
#define INIT_HCA_IN_SIZE 0x200
#define INIT_HCA_VERSION_OFFSET 0x000
#define INIT_HCA_VERSION 2
#define INIT_HCA_CACHELINE_SZ_OFFSET 0x0e
#define INIT_HCA_FLAGS_OFFSET 0x014
#define INIT_HCA_QPC_OFFSET 0x020
#define INIT_HCA_QPC_BASE_OFFSET (INIT_HCA_QPC_OFFSET + 0x10)
#define INIT_HCA_LOG_QP_OFFSET (INIT_HCA_QPC_OFFSET + 0x17)
#define INIT_HCA_SRQC_BASE_OFFSET (INIT_HCA_QPC_OFFSET + 0x28)
#define INIT_HCA_LOG_SRQ_OFFSET (INIT_HCA_QPC_OFFSET + 0x2f)
#define INIT_HCA_CQC_BASE_OFFSET (INIT_HCA_QPC_OFFSET + 0x30)
#define INIT_HCA_LOG_CQ_OFFSET (INIT_HCA_QPC_OFFSET + 0x37)
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
#define INIT_HCA_EQE_CQE_OFFSETS (INIT_HCA_QPC_OFFSET + 0x38)
#define INIT_HCA_ALTC_BASE_OFFSET (INIT_HCA_QPC_OFFSET + 0x40)
#define INIT_HCA_AUXC_BASE_OFFSET (INIT_HCA_QPC_OFFSET + 0x50)
#define INIT_HCA_EQC_BASE_OFFSET (INIT_HCA_QPC_OFFSET + 0x60)
#define INIT_HCA_LOG_EQ_OFFSET (INIT_HCA_QPC_OFFSET + 0x67)
#define INIT_HCA_RDMARC_BASE_OFFSET (INIT_HCA_QPC_OFFSET + 0x70)
#define INIT_HCA_LOG_RD_OFFSET (INIT_HCA_QPC_OFFSET + 0x77)
#define INIT_HCA_MCAST_OFFSET 0x0c0
#define INIT_HCA_MC_BASE_OFFSET (INIT_HCA_MCAST_OFFSET + 0x00)
#define INIT_HCA_LOG_MC_ENTRY_SZ_OFFSET (INIT_HCA_MCAST_OFFSET + 0x12)
#define INIT_HCA_LOG_MC_HASH_SZ_OFFSET (INIT_HCA_MCAST_OFFSET + 0x16)
#define INIT_HCA_UC_STEERING_OFFSET (INIT_HCA_MCAST_OFFSET + 0x18)
#define INIT_HCA_LOG_MC_TABLE_SZ_OFFSET (INIT_HCA_MCAST_OFFSET + 0x1b)
#define INIT_HCA_DEVICE_MANAGED_FLOW_STEERING_EN 0x6
#define INIT_HCA_FS_PARAM_OFFSET 0x1d0
#define INIT_HCA_FS_BASE_OFFSET (INIT_HCA_FS_PARAM_OFFSET + 0x00)
#define INIT_HCA_FS_LOG_ENTRY_SZ_OFFSET (INIT_HCA_FS_PARAM_OFFSET + 0x12)
#define INIT_HCA_FS_LOG_TABLE_SZ_OFFSET (INIT_HCA_FS_PARAM_OFFSET + 0x1b)
#define INIT_HCA_FS_ETH_BITS_OFFSET (INIT_HCA_FS_PARAM_OFFSET + 0x21)
#define INIT_HCA_FS_ETH_NUM_ADDRS_OFFSET (INIT_HCA_FS_PARAM_OFFSET + 0x22)
#define INIT_HCA_FS_IB_BITS_OFFSET (INIT_HCA_FS_PARAM_OFFSET + 0x25)
#define INIT_HCA_FS_IB_NUM_ADDRS_OFFSET (INIT_HCA_FS_PARAM_OFFSET + 0x26)
#define INIT_HCA_TPT_OFFSET 0x0f0
#define INIT_HCA_DMPT_BASE_OFFSET (INIT_HCA_TPT_OFFSET + 0x00)
#define INIT_HCA_LOG_MPT_SZ_OFFSET (INIT_HCA_TPT_OFFSET + 0x0b)
#define INIT_HCA_MTT_BASE_OFFSET (INIT_HCA_TPT_OFFSET + 0x10)
#define INIT_HCA_CMPT_BASE_OFFSET (INIT_HCA_TPT_OFFSET + 0x18)
#define INIT_HCA_UAR_OFFSET 0x120
#define INIT_HCA_LOG_UAR_SZ_OFFSET (INIT_HCA_UAR_OFFSET + 0x0a)
#define INIT_HCA_UAR_PAGE_SZ_OFFSET (INIT_HCA_UAR_OFFSET + 0x0b)
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
inbox = mailbox->buf;
memset(inbox, 0, INIT_HCA_IN_SIZE);
*((u8 *) mailbox->buf + INIT_HCA_VERSION_OFFSET) = INIT_HCA_VERSION;
*((u8 *) mailbox->buf + INIT_HCA_CACHELINE_SZ_OFFSET) =
(ilog2(cache_line_size()) - 4) << 5;
#if defined(__LITTLE_ENDIAN)
*(inbox + INIT_HCA_FLAGS_OFFSET / 4) &= ~cpu_to_be32(1 << 1);
#elif defined(__BIG_ENDIAN)
*(inbox + INIT_HCA_FLAGS_OFFSET / 4) |= cpu_to_be32(1 << 1);
#else
#error Host endianness not defined
#endif
/* Check port for UD address vector: */
*(inbox + INIT_HCA_FLAGS_OFFSET / 4) |= cpu_to_be32(1);
/* Enable IPoIB checksumming if we can: */
if (dev->caps.flags & MLX4_DEV_CAP_FLAG_IPOIB_CSUM)
*(inbox + INIT_HCA_FLAGS_OFFSET / 4) |= cpu_to_be32(1 << 3);
/* Enable QoS support if module parameter set */
if (enable_qos)
*(inbox + INIT_HCA_FLAGS_OFFSET / 4) |= cpu_to_be32(1 << 2);
/* enable counters */
if (dev->caps.flags & MLX4_DEV_CAP_FLAG_COUNTERS)
*(inbox + INIT_HCA_FLAGS_OFFSET / 4) |= cpu_to_be32(1 << 4);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 21:59:24 +07:00
/* CX3 is capable of extending CQEs/EQEs from 32 to 64 bytes */
if (dev->caps.flags & MLX4_DEV_CAP_FLAG_64B_EQE) {
*(inbox + INIT_HCA_EQE_CQE_OFFSETS / 4) |= cpu_to_be32(1 << 29);
dev->caps.eqe_size = 64;
dev->caps.eqe_factor = 1;
} else {
dev->caps.eqe_size = 32;
dev->caps.eqe_factor = 0;
}
if (dev->caps.flags & MLX4_DEV_CAP_FLAG_64B_CQE) {
*(inbox + INIT_HCA_EQE_CQE_OFFSETS / 4) |= cpu_to_be32(1 << 30);
dev->caps.cqe_size = 64;
dev->caps.userspace_caps |= MLX4_USER_DEV_CAP_64B_CQE;
} else {
dev->caps.cqe_size = 32;
}
/* QPC/EEC/CQC/EQC/RDMARC attributes */
MLX4_PUT(inbox, param->qpc_base, INIT_HCA_QPC_BASE_OFFSET);
MLX4_PUT(inbox, param->log_num_qps, INIT_HCA_LOG_QP_OFFSET);
MLX4_PUT(inbox, param->srqc_base, INIT_HCA_SRQC_BASE_OFFSET);
MLX4_PUT(inbox, param->log_num_srqs, INIT_HCA_LOG_SRQ_OFFSET);
MLX4_PUT(inbox, param->cqc_base, INIT_HCA_CQC_BASE_OFFSET);
MLX4_PUT(inbox, param->log_num_cqs, INIT_HCA_LOG_CQ_OFFSET);
MLX4_PUT(inbox, param->altc_base, INIT_HCA_ALTC_BASE_OFFSET);
MLX4_PUT(inbox, param->auxc_base, INIT_HCA_AUXC_BASE_OFFSET);
MLX4_PUT(inbox, param->eqc_base, INIT_HCA_EQC_BASE_OFFSET);
MLX4_PUT(inbox, param->log_num_eqs, INIT_HCA_LOG_EQ_OFFSET);
MLX4_PUT(inbox, param->rdmarc_base, INIT_HCA_RDMARC_BASE_OFFSET);
MLX4_PUT(inbox, param->log_rd_per_qp, INIT_HCA_LOG_RD_OFFSET);
/* steering attributes */
if (dev->caps.steering_mode ==
MLX4_STEERING_MODE_DEVICE_MANAGED) {
*(inbox + INIT_HCA_FLAGS_OFFSET / 4) |=
cpu_to_be32(1 <<
INIT_HCA_DEVICE_MANAGED_FLOW_STEERING_EN);
MLX4_PUT(inbox, param->mc_base, INIT_HCA_FS_BASE_OFFSET);
MLX4_PUT(inbox, param->log_mc_entry_sz,
INIT_HCA_FS_LOG_ENTRY_SZ_OFFSET);
MLX4_PUT(inbox, param->log_mc_table_sz,
INIT_HCA_FS_LOG_TABLE_SZ_OFFSET);
/* Enable Ethernet flow steering
* with udp unicast and tcp unicast
*/
MLX4_PUT(inbox, param->fs_hash_enable_bits,
INIT_HCA_FS_ETH_BITS_OFFSET);
MLX4_PUT(inbox, (u16) MLX4_FS_NUM_OF_L2_ADDR,
INIT_HCA_FS_ETH_NUM_ADDRS_OFFSET);
/* Enable IPoIB flow steering
* with udp unicast and tcp unicast
*/
MLX4_PUT(inbox, param->fs_hash_enable_bits,
INIT_HCA_FS_IB_BITS_OFFSET);
MLX4_PUT(inbox, (u16) MLX4_FS_NUM_OF_L2_ADDR,
INIT_HCA_FS_IB_NUM_ADDRS_OFFSET);
} else {
MLX4_PUT(inbox, param->mc_base, INIT_HCA_MC_BASE_OFFSET);
MLX4_PUT(inbox, param->log_mc_entry_sz,
INIT_HCA_LOG_MC_ENTRY_SZ_OFFSET);
MLX4_PUT(inbox, param->log_mc_hash_sz,
INIT_HCA_LOG_MC_HASH_SZ_OFFSET);
MLX4_PUT(inbox, param->log_mc_table_sz,
INIT_HCA_LOG_MC_TABLE_SZ_OFFSET);
if (dev->caps.steering_mode == MLX4_STEERING_MODE_B0)
MLX4_PUT(inbox, (u8) (1 << 3),
INIT_HCA_UC_STEERING_OFFSET);
}
/* TPT attributes */
MLX4_PUT(inbox, param->dmpt_base, INIT_HCA_DMPT_BASE_OFFSET);
MLX4_PUT(inbox, param->log_mpt_sz, INIT_HCA_LOG_MPT_SZ_OFFSET);
MLX4_PUT(inbox, param->mtt_base, INIT_HCA_MTT_BASE_OFFSET);
MLX4_PUT(inbox, param->cmpt_base, INIT_HCA_CMPT_BASE_OFFSET);
/* UAR attributes */
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
MLX4_PUT(inbox, param->uar_page_sz, INIT_HCA_UAR_PAGE_SZ_OFFSET);
MLX4_PUT(inbox, param->log_uar_sz, INIT_HCA_LOG_UAR_SZ_OFFSET);
err = mlx4_cmd(dev, mailbox->dma, 0, 0, MLX4_CMD_INIT_HCA, 10000,
MLX4_CMD_NATIVE);
if (err)
mlx4_err(dev, "INIT_HCA returns %d\n", err);
mlx4_free_cmd_mailbox(dev, mailbox);
return err;
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
int mlx4_QUERY_HCA(struct mlx4_dev *dev,
struct mlx4_init_hca_param *param)
{
struct mlx4_cmd_mailbox *mailbox;
__be32 *outbox;
int err;
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 21:59:24 +07:00
u8 byte_field;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
#define QUERY_HCA_GLOBAL_CAPS_OFFSET 0x04
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
outbox = mailbox->buf;
err = mlx4_cmd_box(dev, 0, mailbox->dma, 0, 0,
MLX4_CMD_QUERY_HCA,
MLX4_CMD_TIME_CLASS_B,
!mlx4_is_slave(dev));
if (err)
goto out;
MLX4_GET(param->global_caps, outbox, QUERY_HCA_GLOBAL_CAPS_OFFSET);
/* QPC/EEC/CQC/EQC/RDMARC attributes */
MLX4_GET(param->qpc_base, outbox, INIT_HCA_QPC_BASE_OFFSET);
MLX4_GET(param->log_num_qps, outbox, INIT_HCA_LOG_QP_OFFSET);
MLX4_GET(param->srqc_base, outbox, INIT_HCA_SRQC_BASE_OFFSET);
MLX4_GET(param->log_num_srqs, outbox, INIT_HCA_LOG_SRQ_OFFSET);
MLX4_GET(param->cqc_base, outbox, INIT_HCA_CQC_BASE_OFFSET);
MLX4_GET(param->log_num_cqs, outbox, INIT_HCA_LOG_CQ_OFFSET);
MLX4_GET(param->altc_base, outbox, INIT_HCA_ALTC_BASE_OFFSET);
MLX4_GET(param->auxc_base, outbox, INIT_HCA_AUXC_BASE_OFFSET);
MLX4_GET(param->eqc_base, outbox, INIT_HCA_EQC_BASE_OFFSET);
MLX4_GET(param->log_num_eqs, outbox, INIT_HCA_LOG_EQ_OFFSET);
MLX4_GET(param->rdmarc_base, outbox, INIT_HCA_RDMARC_BASE_OFFSET);
MLX4_GET(param->log_rd_per_qp, outbox, INIT_HCA_LOG_RD_OFFSET);
/* steering attributes */
if (dev->caps.steering_mode ==
MLX4_STEERING_MODE_DEVICE_MANAGED) {
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
MLX4_GET(param->mc_base, outbox, INIT_HCA_FS_BASE_OFFSET);
MLX4_GET(param->log_mc_entry_sz, outbox,
INIT_HCA_FS_LOG_ENTRY_SZ_OFFSET);
MLX4_GET(param->log_mc_table_sz, outbox,
INIT_HCA_FS_LOG_TABLE_SZ_OFFSET);
} else {
MLX4_GET(param->mc_base, outbox, INIT_HCA_MC_BASE_OFFSET);
MLX4_GET(param->log_mc_entry_sz, outbox,
INIT_HCA_LOG_MC_ENTRY_SZ_OFFSET);
MLX4_GET(param->log_mc_hash_sz, outbox,
INIT_HCA_LOG_MC_HASH_SZ_OFFSET);
MLX4_GET(param->log_mc_table_sz, outbox,
INIT_HCA_LOG_MC_TABLE_SZ_OFFSET);
}
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 21:59:24 +07:00
/* CX3 is capable of extending CQEs/EQEs from 32 to 64 bytes */
MLX4_GET(byte_field, outbox, INIT_HCA_EQE_CQE_OFFSETS);
if (byte_field & 0x20) /* 64-bytes eqe enabled */
param->dev_cap_enabled |= MLX4_DEV_CAP_64B_EQE_ENABLED;
if (byte_field & 0x40) /* 64-bytes cqe enabled */
param->dev_cap_enabled |= MLX4_DEV_CAP_64B_CQE_ENABLED;
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:18:30 +07:00
/* TPT attributes */
MLX4_GET(param->dmpt_base, outbox, INIT_HCA_DMPT_BASE_OFFSET);
MLX4_GET(param->log_mpt_sz, outbox, INIT_HCA_LOG_MPT_SZ_OFFSET);
MLX4_GET(param->mtt_base, outbox, INIT_HCA_MTT_BASE_OFFSET);
MLX4_GET(param->cmpt_base, outbox, INIT_HCA_CMPT_BASE_OFFSET);
/* UAR attributes */
MLX4_GET(param->uar_page_sz, outbox, INIT_HCA_UAR_PAGE_SZ_OFFSET);
MLX4_GET(param->log_uar_sz, outbox, INIT_HCA_LOG_UAR_SZ_OFFSET);
out:
mlx4_free_cmd_mailbox(dev, mailbox);
return err;
}
/* for IB-type ports only in SRIOV mode. Checks that both proxy QP0
* and real QP0 are active, so that the paravirtualized QP0 is ready
* to operate */
static int check_qp0_state(struct mlx4_dev *dev, int function, int port)
{
struct mlx4_priv *priv = mlx4_priv(dev);
/* irrelevant if not infiniband */
if (priv->mfunc.master.qp0_state[port].proxy_qp0_active &&
priv->mfunc.master.qp0_state[port].qp0_active)
return 1;
return 0;
}
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
int mlx4_INIT_PORT_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int port = vhcr->in_modifier;
int err;
if (priv->mfunc.master.slave_state[slave].init_port_mask & (1 << port))
return 0;
if (dev->caps.port_mask[port] != MLX4_PORT_TYPE_IB) {
/* Enable port only if it was previously disabled */
if (!priv->mfunc.master.init_port_ref[port]) {
err = mlx4_cmd(dev, 0, port, 0, MLX4_CMD_INIT_PORT,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
if (err)
return err;
}
priv->mfunc.master.slave_state[slave].init_port_mask |= (1 << port);
} else {
if (slave == mlx4_master_func_num(dev)) {
if (check_qp0_state(dev, slave, port) &&
!priv->mfunc.master.qp0_state[port].port_active) {
err = mlx4_cmd(dev, 0, port, 0, MLX4_CMD_INIT_PORT,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
if (err)
return err;
priv->mfunc.master.qp0_state[port].port_active = 1;
priv->mfunc.master.slave_state[slave].init_port_mask |= (1 << port);
}
} else
priv->mfunc.master.slave_state[slave].init_port_mask |= (1 << port);
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
}
++priv->mfunc.master.init_port_ref[port];
return 0;
}
int mlx4_INIT_PORT(struct mlx4_dev *dev, int port)
{
struct mlx4_cmd_mailbox *mailbox;
u32 *inbox;
int err;
u32 flags;
u16 field;
if (dev->flags & MLX4_FLAG_OLD_PORT_CMDS) {
#define INIT_PORT_IN_SIZE 256
#define INIT_PORT_FLAGS_OFFSET 0x00
#define INIT_PORT_FLAG_SIG (1 << 18)
#define INIT_PORT_FLAG_NG (1 << 17)
#define INIT_PORT_FLAG_G0 (1 << 16)
#define INIT_PORT_VL_SHIFT 4
#define INIT_PORT_PORT_WIDTH_SHIFT 8
#define INIT_PORT_MTU_OFFSET 0x04
#define INIT_PORT_MAX_GID_OFFSET 0x06
#define INIT_PORT_MAX_PKEY_OFFSET 0x0a
#define INIT_PORT_GUID0_OFFSET 0x10
#define INIT_PORT_NODE_GUID_OFFSET 0x18
#define INIT_PORT_SI_GUID_OFFSET 0x20
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
inbox = mailbox->buf;
memset(inbox, 0, INIT_PORT_IN_SIZE);
flags = 0;
flags |= (dev->caps.vl_cap[port] & 0xf) << INIT_PORT_VL_SHIFT;
flags |= (dev->caps.port_width_cap[port] & 0xf) << INIT_PORT_PORT_WIDTH_SHIFT;
MLX4_PUT(inbox, flags, INIT_PORT_FLAGS_OFFSET);
field = 128 << dev->caps.ib_mtu_cap[port];
MLX4_PUT(inbox, field, INIT_PORT_MTU_OFFSET);
field = dev->caps.gid_table_len[port];
MLX4_PUT(inbox, field, INIT_PORT_MAX_GID_OFFSET);
field = dev->caps.pkey_table_len[port];
MLX4_PUT(inbox, field, INIT_PORT_MAX_PKEY_OFFSET);
err = mlx4_cmd(dev, mailbox->dma, port, 0, MLX4_CMD_INIT_PORT,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
mlx4_free_cmd_mailbox(dev, mailbox);
} else
err = mlx4_cmd(dev, 0, port, 0, MLX4_CMD_INIT_PORT,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_WRAPPED);
return err;
}
EXPORT_SYMBOL_GPL(mlx4_INIT_PORT);
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
int mlx4_CLOSE_PORT_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int port = vhcr->in_modifier;
int err;
if (!(priv->mfunc.master.slave_state[slave].init_port_mask &
(1 << port)))
return 0;
if (dev->caps.port_mask[port] != MLX4_PORT_TYPE_IB) {
if (priv->mfunc.master.init_port_ref[port] == 1) {
err = mlx4_cmd(dev, 0, port, 0, MLX4_CMD_CLOSE_PORT,
1000, MLX4_CMD_NATIVE);
if (err)
return err;
}
priv->mfunc.master.slave_state[slave].init_port_mask &= ~(1 << port);
} else {
/* infiniband port */
if (slave == mlx4_master_func_num(dev)) {
if (!priv->mfunc.master.qp0_state[port].qp0_active &&
priv->mfunc.master.qp0_state[port].port_active) {
err = mlx4_cmd(dev, 0, port, 0, MLX4_CMD_CLOSE_PORT,
1000, MLX4_CMD_NATIVE);
if (err)
return err;
priv->mfunc.master.slave_state[slave].init_port_mask &= ~(1 << port);
priv->mfunc.master.qp0_state[port].port_active = 0;
}
} else
priv->mfunc.master.slave_state[slave].init_port_mask &= ~(1 << port);
mlx4_core: Added FW commands and their wrappers for supporting SRIOV The following commands are added here: 1. QUERY_FUNC_CAP and its wrapper. This function is used by VFs when they start up to receive configuration information from the PF, such as resource quotas for this VF, which ports should be used (currently two), what protocol is running on the port (currently Ethernet ONLY, or port not active). 2. QUERY_PORT and its wrapper. Previously, this FW command was invoked directly by the ETH driver (en_port.c) using mlx4_cmd_box. Virtualization is now required here (the VF's MAC address must be substituted for the PFs MAC address returned by the FW). We changed the invocation in the ETH driver to use mlx4_QUERY_PORT, and added the wrapper. 3. QUERY_HCA. Used by the VF to determine how the HCA was initialized. For now, we need only the multicast table member entry size (log2_mc_table_entry_sz, in the ConnectX PRM). No wrapper is needed here, because the data may be passed as is to the VF without modification). In this command, we have added a GLOBAL_CAPS field for passing required configuration information from FW to a VF (this field is to allow safely adding new SRIOV capabilities which require support in VF drivers, too). Bits will set here by FW in response to PF-driver configuration commands which will activate as yet undefined new SRIOV features. The VF will test to see that all required capabilities indicated by this field are supported (i.e., if a bit is set and the VF driver does not recognize that bit, it must abort its initialization). Currently, no bits are set. 4. Added a CLOSE_PORT wrapper. The PF context needs to keep track of how many VF contexts have the port open. The PF context will not actually issue the FW close port command until the last port user issues a CLOSE_PORT request. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 11:12:40 +07:00
}
--priv->mfunc.master.init_port_ref[port];
return 0;
}
int mlx4_CLOSE_PORT(struct mlx4_dev *dev, int port)
{
return mlx4_cmd(dev, 0, port, 0, MLX4_CMD_CLOSE_PORT, 1000,
MLX4_CMD_WRAPPED);
}
EXPORT_SYMBOL_GPL(mlx4_CLOSE_PORT);
int mlx4_CLOSE_HCA(struct mlx4_dev *dev, int panic)
{
return mlx4_cmd(dev, 0, 0, panic, MLX4_CMD_CLOSE_HCA, 1000,
MLX4_CMD_NATIVE);
}
int mlx4_SET_ICM_SIZE(struct mlx4_dev *dev, u64 icm_size, u64 *aux_pages)
{
int ret = mlx4_cmd_imm(dev, icm_size, aux_pages, 0, 0,
MLX4_CMD_SET_ICM_SIZE,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
if (ret)
return ret;
/*
* Round up number of system pages needed in case
* MLX4_ICM_PAGE_SIZE < PAGE_SIZE.
*/
*aux_pages = ALIGN(*aux_pages, PAGE_SIZE / MLX4_ICM_PAGE_SIZE) >>
(PAGE_SHIFT - MLX4_ICM_PAGE_SHIFT);
return 0;
}
int mlx4_NOP(struct mlx4_dev *dev)
{
/* Input modifier of 0x1f means "finish as soon as possible." */
return mlx4_cmd(dev, 0, 0x1f, 0, MLX4_CMD_NOP, 100, MLX4_CMD_NATIVE);
}
#define MLX4_WOL_SETUP_MODE (5 << 28)
int mlx4_wol_read(struct mlx4_dev *dev, u64 *config, int port)
{
u32 in_mod = MLX4_WOL_SETUP_MODE | port << 8;
return mlx4_cmd_imm(dev, 0, config, in_mod, 0x3,
MLX4_CMD_MOD_STAT_CFG, MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_NATIVE);
}
EXPORT_SYMBOL_GPL(mlx4_wol_read);
int mlx4_wol_write(struct mlx4_dev *dev, u64 config, int port)
{
u32 in_mod = MLX4_WOL_SETUP_MODE | port << 8;
return mlx4_cmd(dev, config, in_mod, 0x1, MLX4_CMD_MOD_STAT_CFG,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
}
EXPORT_SYMBOL_GPL(mlx4_wol_write);