linux_dsm_epyc7002/drivers/scsi/qla2xxx/qla_init.c

/*
 * QLogic Fibre Channel HBA Driver
 * Copyright (c)  2003-2014 QLogic Corporation
 *
 * See LICENSE.qla2xxx for copyright and licensing details.
 */
#include "qla_def.h"
#include "qla_gbl.h"

#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>

#include "qla_devtbl.h"

#ifdef CONFIG_SPARC
#include <asm/prom.h>
#endif

#include <target/target_core_base.h>
#include "qla_target.h"

/*
*  QLogic ISP2x00 Hardware Support Function Prototypes.
*/
static int qla2x00_isp_firmware(scsi_qla_host_t *);
static int qla2x00_setup_chip(scsi_qla_host_t *);
static int qla2x00_fw_ready(scsi_qla_host_t *);
static int qla2x00_configure_hba(scsi_qla_host_t *);
static int qla2x00_configure_loop(scsi_qla_host_t *);
static int qla2x00_configure_local_loop(scsi_qla_host_t *);
static int qla2x00_configure_fabric(scsi_qla_host_t *);
static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *);
static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *,
    uint16_t *);

static int qla2x00_restart_isp(scsi_qla_host_t *);

static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *);
static int qla84xx_init_chip(scsi_qla_host_t *);
static int qla25xx_init_queues(struct qla_hw_data *);

/* SRB Extensions ---------------------------------------------------------- */

void
qla2x00_sp_timeout(unsigned long __data)
{
	srb_t *sp = (srb_t *)__data;
	struct srb_iocb *iocb;
	fc_port_t *fcport = sp->fcport;
	struct qla_hw_data *ha = fcport->vha->hw;
	struct req_que *req;
	unsigned long flags;

	spin_lock_irqsave(&ha->hardware_lock, flags);
	req = ha->req_q_map[0];
	req->outstanding_cmds[sp->handle] = NULL;
	iocb = &sp->u.iocb_cmd;
	iocb->timeout(sp);
	sp->free(fcport->vha, sp);
	spin_unlock_irqrestore(&ha->hardware_lock, flags);
}

void
qla2x00_sp_free(void *data, void *ptr)
{
	srb_t *sp = (srb_t *)ptr;
	struct srb_iocb *iocb = &sp->u.iocb_cmd;
	struct scsi_qla_host *vha = (scsi_qla_host_t *)data;

	del_timer(&iocb->timer);
	qla2x00_rel_sp(vha, sp);
}

/* Asynchronous Login/Logout Routines -------------------------------------- */

unsigned long
qla2x00_get_async_timeout(struct scsi_qla_host *vha)
{
	unsigned long tmo;
	struct qla_hw_data *ha = vha->hw;

	/* Firmware should use switch negotiated r_a_tov for timeout. */
	tmo = ha->r_a_tov / 10 * 2;
	if (IS_QLAFX00(ha)) {
		tmo = FX00_DEF_RATOV * 2;
	} else if (!IS_FWI2_CAPABLE(ha)) {
		/*
		 * Except for earlier ISPs where the timeout is seeded from the
		 * initialization control block.
		 */
		tmo = ha->login_timeout;
	}
	return tmo;
}

static void
qla2x00_async_iocb_timeout(void *data)
{
	srb_t *sp = (srb_t *)data;
	fc_port_t *fcport = sp->fcport;

	ql_dbg(ql_dbg_disc, fcport->vha, 0x2071,
	    "Async-%s timeout - hdl=%x portid=%02x%02x%02x.\n",
	    sp->name, sp->handle, fcport->d_id.b.domain, fcport->d_id.b.area,
	    fcport->d_id.b.al_pa);

	fcport->flags &= ~FCF_ASYNC_SENT;
	if (sp->type == SRB_LOGIN_CMD) {
		struct srb_iocb *lio = &sp->u.iocb_cmd;
		qla2x00_post_async_logout_work(fcport->vha, fcport, NULL);
		/* Retry as needed. */
		lio->u.logio.data[0] = MBS_COMMAND_ERROR;
		lio->u.logio.data[1] = lio->u.logio.flags & SRB_LOGIN_RETRIED ?
			QLA_LOGIO_LOGIN_RETRIED : 0;
		qla2x00_post_async_login_done_work(fcport->vha, fcport,
			lio->u.logio.data);
	} else if (sp->type == SRB_LOGOUT_CMD) {
		qlt_logo_completion_handler(fcport, QLA_FUNCTION_TIMEOUT);
	}
}

static void
qla2x00_async_login_sp_done(void *data, void *ptr, int res)
{
	srb_t *sp = (srb_t *)ptr;
	struct srb_iocb *lio = &sp->u.iocb_cmd;
	struct scsi_qla_host *vha = (scsi_qla_host_t *)data;

	if (!test_bit(UNLOADING, &vha->dpc_flags))
		qla2x00_post_async_login_done_work(sp->fcport->vha, sp->fcport,
		    lio->u.logio.data);
	sp->free(sp->fcport->vha, sp);
}

int
qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport,
    uint16_t *data)
{
	srb_t *sp;
	struct srb_iocb *lio;
	int rval;

	rval = QLA_FUNCTION_FAILED;
	sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
	if (!sp)
		goto done;

	sp->type = SRB_LOGIN_CMD;
	sp->name = "login";
	qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);

	lio = &sp->u.iocb_cmd;
	lio->timeout = qla2x00_async_iocb_timeout;
	sp->done = qla2x00_async_login_sp_done;
	lio->u.logio.flags |= SRB_LOGIN_COND_PLOGI;
	if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
		lio->u.logio.flags |= SRB_LOGIN_RETRIED;
	rval = qla2x00_start_sp(sp);
	if (rval != QLA_SUCCESS) {
		fcport->flags &= ~FCF_ASYNC_SENT;
		fcport->flags |= FCF_LOGIN_NEEDED;
		set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
		goto done_free_sp;
	}

	ql_dbg(ql_dbg_disc, vha, 0x2072,
	    "Async-login - hdl=%x, loopid=%x portid=%02x%02x%02x "
	    "retries=%d.\n", sp->handle, fcport->loop_id,
	    fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa,
	    fcport->login_retry);
	return rval;

done_free_sp:
	sp->free(fcport->vha, sp);
done:
	return rval;
}

static void
qla2x00_async_logout_sp_done(void *data, void *ptr, int res)
{
	srb_t *sp = (srb_t *)ptr;
	struct srb_iocb *lio = &sp->u.iocb_cmd;
	struct scsi_qla_host *vha = (scsi_qla_host_t *)data;

	if (!test_bit(UNLOADING, &vha->dpc_flags))
		qla2x00_post_async_logout_done_work(sp->fcport->vha, sp->fcport,
		    lio->u.logio.data);
	sp->free(sp->fcport->vha, sp);
}

int
qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport)
{
	srb_t *sp;
	struct srb_iocb *lio;
	int rval;

	rval = QLA_FUNCTION_FAILED;
	sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
	if (!sp)
		goto done;

	sp->type = SRB_LOGOUT_CMD;
	sp->name = "logout";
	qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);

	lio = &sp->u.iocb_cmd;
	lio->timeout = qla2x00_async_iocb_timeout;
	sp->done = qla2x00_async_logout_sp_done;
	rval = qla2x00_start_sp(sp);
	if (rval != QLA_SUCCESS)
		goto done_free_sp;

	ql_dbg(ql_dbg_disc, vha, 0x2070,
	    "Async-logout - hdl=%x loop-id=%x portid=%02x%02x%02x.\n",
	    sp->handle, fcport->loop_id, fcport->d_id.b.domain,
	    fcport->d_id.b.area, fcport->d_id.b.al_pa);
	return rval;

done_free_sp:
	sp->free(fcport->vha, sp);
done:
	return rval;
}

static void
qla2x00_async_adisc_sp_done(void *data, void *ptr, int res)
{
	srb_t *sp = (srb_t *)ptr;
	struct srb_iocb *lio = &sp->u.iocb_cmd;
	struct scsi_qla_host *vha = (scsi_qla_host_t *)data;

	if (!test_bit(UNLOADING, &vha->dpc_flags))
		qla2x00_post_async_adisc_done_work(sp->fcport->vha, sp->fcport,
		    lio->u.logio.data);
	sp->free(sp->fcport->vha, sp);
}

int
qla2x00_async_adisc(struct scsi_qla_host *vha, fc_port_t *fcport,
    uint16_t *data)
{
	srb_t *sp;
	struct srb_iocb *lio;
	int rval;

	rval = QLA_FUNCTION_FAILED;
	sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
	if (!sp)
		goto done;

	sp->type = SRB_ADISC_CMD;
	sp->name = "adisc";
	qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);

	lio = &sp->u.iocb_cmd;
	lio->timeout = qla2x00_async_iocb_timeout;
	sp->done = qla2x00_async_adisc_sp_done;
	if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
		lio->u.logio.flags |= SRB_LOGIN_RETRIED;
	rval = qla2x00_start_sp(sp);
	if (rval != QLA_SUCCESS)
		goto done_free_sp;

	ql_dbg(ql_dbg_disc, vha, 0x206f,
	    "Async-adisc - hdl=%x loopid=%x portid=%02x%02x%02x.\n",
	    sp->handle, fcport->loop_id, fcport->d_id.b.domain,
	    fcport->d_id.b.area, fcport->d_id.b.al_pa);
	return rval;

done_free_sp:
	sp->free(fcport->vha, sp);
done:
	return rval;
}

static void
qla2x00_tmf_iocb_timeout(void *data)
{
	srb_t *sp = (srb_t *)data;
	struct srb_iocb *tmf = &sp->u.iocb_cmd;

	tmf->u.tmf.comp_status = CS_TIMEOUT;
	complete(&tmf->u.tmf.comp);
}

static void
qla2x00_tmf_sp_done(void *data, void *ptr, int res)
{
	srb_t *sp = (srb_t *)ptr;
	struct srb_iocb *tmf = &sp->u.iocb_cmd;
	complete(&tmf->u.tmf.comp);
}

int
qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t flags, uint32_t lun,
	uint32_t tag)
{
	struct scsi_qla_host *vha = fcport->vha;
	struct srb_iocb *tm_iocb;
	srb_t *sp;
	int rval = QLA_FUNCTION_FAILED;

	sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
	if (!sp)
		goto done;

	tm_iocb = &sp->u.iocb_cmd;
	sp->type = SRB_TM_CMD;
	sp->name = "tmf";
	qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha));
	tm_iocb->u.tmf.flags = flags;
	tm_iocb->u.tmf.lun = lun;
	tm_iocb->u.tmf.data = tag;
	sp->done = qla2x00_tmf_sp_done;
	tm_iocb->timeout = qla2x00_tmf_iocb_timeout;
	init_completion(&tm_iocb->u.tmf.comp);

	rval = qla2x00_start_sp(sp);
	if (rval != QLA_SUCCESS)
		goto done_free_sp;

	ql_dbg(ql_dbg_taskm, vha, 0x802f,
	    "Async-tmf hdl=%x loop-id=%x portid=%02x%02x%02x.\n",
	    sp->handle, fcport->loop_id, fcport->d_id.b.domain,
	    fcport->d_id.b.area, fcport->d_id.b.al_pa);

	wait_for_completion(&tm_iocb->u.tmf.comp);

	rval = tm_iocb->u.tmf.comp_status == CS_COMPLETE ?
	    QLA_SUCCESS : QLA_FUNCTION_FAILED;

	if ((rval != QLA_SUCCESS) || tm_iocb->u.tmf.data) {
		ql_dbg(ql_dbg_taskm, vha, 0x8030,
		    "TM IOCB failed (%x).\n", rval);
	}

	if (!test_bit(UNLOADING, &vha->dpc_flags) && !IS_QLAFX00(vha->hw)) {
		flags = tm_iocb->u.tmf.flags;
		lun = (uint16_t)tm_iocb->u.tmf.lun;

		/* Issue Marker IOCB */
		qla2x00_marker(vha, vha->hw->req_q_map[0],
		    vha->hw->rsp_q_map[0], sp->fcport->loop_id, lun,
		    flags == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID);
	}

done_free_sp:
	sp->free(vha, sp);
done:
	return rval;
}

static void
qla24xx_abort_iocb_timeout(void *data)
{
	srb_t *sp = (srb_t *)data;
	struct srb_iocb *abt = &sp->u.iocb_cmd;

	abt->u.abt.comp_status = CS_TIMEOUT;
	complete(&abt->u.abt.comp);
}

static void
qla24xx_abort_sp_done(void *data, void *ptr, int res)
{
	srb_t *sp = (srb_t *)ptr;
	struct srb_iocb *abt = &sp->u.iocb_cmd;

	complete(&abt->u.abt.comp);
}

static int
qla24xx_async_abort_cmd(srb_t *cmd_sp)
{
	scsi_qla_host_t *vha = cmd_sp->fcport->vha;
	fc_port_t *fcport = cmd_sp->fcport;
	struct srb_iocb *abt_iocb;
	srb_t *sp;
	int rval = QLA_FUNCTION_FAILED;

	sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
	if (!sp)
		goto done;

	abt_iocb = &sp->u.iocb_cmd;
	sp->type = SRB_ABT_CMD;
	sp->name = "abort";
	qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha));
	abt_iocb->u.abt.cmd_hndl = cmd_sp->handle;
	sp->done = qla24xx_abort_sp_done;
	abt_iocb->timeout = qla24xx_abort_iocb_timeout;
	init_completion(&abt_iocb->u.abt.comp);

	rval = qla2x00_start_sp(sp);
	if (rval != QLA_SUCCESS)
		goto done_free_sp;

	ql_dbg(ql_dbg_async, vha, 0x507c,
	    "Abort command issued - hdl=%x, target_id=%x\n",
	    cmd_sp->handle, fcport->tgt_id);

	wait_for_completion(&abt_iocb->u.abt.comp);

	rval = abt_iocb->u.abt.comp_status == CS_COMPLETE ?
	    QLA_SUCCESS : QLA_FUNCTION_FAILED;

done_free_sp:
	sp->free(vha, sp);
done:
	return rval;
}

int
qla24xx_async_abort_command(srb_t *sp)
{
	unsigned long   flags = 0;

	uint32_t	handle;
	fc_port_t	*fcport = sp->fcport;
	struct scsi_qla_host *vha = fcport->vha;
	struct qla_hw_data *ha = vha->hw;
	struct req_que *req = vha->req;

	spin_lock_irqsave(&ha->hardware_lock, flags);
	for (handle = 1; handle < req->num_outstanding_cmds; handle++) {
		if (req->outstanding_cmds[handle] == sp)
			break;
	}
	spin_unlock_irqrestore(&ha->hardware_lock, flags);
	if (handle == req->num_outstanding_cmds) {
		/* Command not found. */
		return QLA_FUNCTION_FAILED;
	}
	if (sp->type == SRB_FXIOCB_DCMD)
		return qlafx00_fx_disc(vha, &vha->hw->mr.fcport,
		    FXDISC_ABORT_IOCTL);

	return qla24xx_async_abort_cmd(sp);
}

void
qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport,
    uint16_t *data)
{
	int rval;

	switch (data[0]) {
	case MBS_COMMAND_COMPLETE:
		/*
		 * Driver must validate login state - If PRLI not complete,
		 * force a relogin attempt via implicit LOGO, PLOGI, and PRLI
		 * requests.
		 */
		rval = qla2x00_get_port_database(vha, fcport, 0);
		if (rval == QLA_NOT_LOGGED_IN) {
			fcport->flags &= ~FCF_ASYNC_SENT;
			fcport->flags |= FCF_LOGIN_NEEDED;
			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
			break;
		}

		if (rval != QLA_SUCCESS) {
			qla2x00_post_async_logout_work(vha, fcport, NULL);
			qla2x00_post_async_login_work(vha, fcport, NULL);
			break;
		}
		if (fcport->flags & FCF_FCP2_DEVICE) {
			qla2x00_post_async_adisc_work(vha, fcport, data);
			break;
		}
		qla2x00_update_fcport(vha, fcport);
		break;
	case MBS_COMMAND_ERROR:
		fcport->flags &= ~FCF_ASYNC_SENT;
		if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
		else
			qla2x00_mark_device_lost(vha, fcport, 1, 0);
		break;
	case MBS_PORT_ID_USED:
		fcport->loop_id = data[1];
		qla2x00_post_async_logout_work(vha, fcport, NULL);
		qla2x00_post_async_login_work(vha, fcport, NULL);
		break;
	case MBS_LOOP_ID_USED:
		fcport->loop_id++;
		rval = qla2x00_find_new_loop_id(vha, fcport);
		if (rval != QLA_SUCCESS) {
			fcport->flags &= ~FCF_ASYNC_SENT;
			qla2x00_mark_device_lost(vha, fcport, 1, 0);
			break;
		}
		qla2x00_post_async_login_work(vha, fcport, NULL);
		break;
	}
	return;
}

void
qla2x00_async_logout_done(struct scsi_qla_host *vha, fc_port_t *fcport,
    uint16_t *data)
{
	/* Don't re-login in target mode */
	if (!fcport->tgt_session)
		qla2x00_mark_device_lost(vha, fcport, 1, 0);
	qlt_logo_completion_handler(fcport, data[0]);
	return;
}

void
qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport,
    uint16_t *data)
{
	if (data[0] == MBS_COMMAND_COMPLETE) {
		qla2x00_update_fcport(vha, fcport);

		return;
	}

	/* Retry login. */
	fcport->flags &= ~FCF_ASYNC_SENT;
	if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
		set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
	else
		qla2x00_mark_device_lost(vha, fcport, 1, 0);

	return;
}

/****************************************************************************/
/*                QLogic ISP2x00 Hardware Support Functions.                */
/****************************************************************************/

static int
qla83xx_nic_core_fw_load(scsi_qla_host_t *vha)
{
	int rval = QLA_SUCCESS;
	struct qla_hw_data *ha = vha->hw;
	uint32_t idc_major_ver, idc_minor_ver;
	uint16_t config[4];

	qla83xx_idc_lock(vha, 0);

	/* SV: TODO: Assign initialization timeout from
	 * flash-info / other param
	 */
	ha->fcoe_dev_init_timeout = QLA83XX_IDC_INITIALIZATION_TIMEOUT;
	ha->fcoe_reset_timeout = QLA83XX_IDC_RESET_ACK_TIMEOUT;

	/* Set our fcoe function presence */
	if (__qla83xx_set_drv_presence(vha) != QLA_SUCCESS) {
		ql_dbg(ql_dbg_p3p, vha, 0xb077,
		    "Error while setting DRV-Presence.\n");
		rval = QLA_FUNCTION_FAILED;
		goto exit;
	}

	/* Decide the reset ownership */
	qla83xx_reset_ownership(vha);

	/*
	 * On first protocol driver load:
	 * Init-Owner: Set IDC-Major-Version and Clear IDC-Lock-Recovery
	 * register.
	 * Others: Check compatibility with current IDC Major version.
	 */
	qla83xx_rd_reg(vha, QLA83XX_IDC_MAJOR_VERSION, &idc_major_ver);
	if (ha->flags.nic_core_reset_owner) {
		/* Set IDC Major version */
		idc_major_ver = QLA83XX_SUPP_IDC_MAJOR_VERSION;
		qla83xx_wr_reg(vha, QLA83XX_IDC_MAJOR_VERSION, idc_major_ver);

		/* Clearing IDC-Lock-Recovery register */
		qla83xx_wr_reg(vha, QLA83XX_IDC_LOCK_RECOVERY, 0);
	} else if (idc_major_ver != QLA83XX_SUPP_IDC_MAJOR_VERSION) {
		/*
		 * Clear further IDC participation if we are not compatible with
		 * the current IDC Major Version.
		 */
		ql_log(ql_log_warn, vha, 0xb07d,
		    "Failing load, idc_major_ver=%d, expected_major_ver=%d.\n",
		    idc_major_ver, QLA83XX_SUPP_IDC_MAJOR_VERSION);
		__qla83xx_clear_drv_presence(vha);
		rval = QLA_FUNCTION_FAILED;
		goto exit;
	}
	/* Each function sets its supported Minor version. */
	qla83xx_rd_reg(vha, QLA83XX_IDC_MINOR_VERSION, &idc_minor_ver);
	idc_minor_ver |= (QLA83XX_SUPP_IDC_MINOR_VERSION << (ha->portnum * 2));
	qla83xx_wr_reg(vha, QLA83XX_IDC_MINOR_VERSION, idc_minor_ver);

	if (ha->flags.nic_core_reset_owner) {
		memset(config, 0, sizeof(config));
		if (!qla81xx_get_port_config(vha, config))
			qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE,
			    QLA8XXX_DEV_READY);
	}

	rval = qla83xx_idc_state_handler(vha);

exit:
	qla83xx_idc_unlock(vha, 0);

	return rval;
}

/*
* qla2x00_initialize_adapter
*      Initialize board.
*
* Input:
*      ha = adapter block pointer.
*
* Returns:
*      0 = success
*/
int
qla2x00_initialize_adapter(scsi_qla_host_t *vha)
{
	int	rval;
	struct qla_hw_data *ha = vha->hw;
	struct req_que *req = ha->req_q_map[0];

	memset(&vha->qla_stats, 0, sizeof(vha->qla_stats));
	memset(&vha->fc_host_stat, 0, sizeof(vha->fc_host_stat));

	/* Clear adapter flags. */
	vha->flags.online = 0;
	ha->flags.chip_reset_done = 0;
	vha->flags.reset_active = 0;
	ha->flags.pci_channel_io_perm_failure = 0;
	ha->flags.eeh_busy = 0;
	vha->qla_stats.jiffies_at_last_reset = get_jiffies_64();
	atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
	atomic_set(&vha->loop_state, LOOP_DOWN);
	vha->device_flags = DFLG_NO_CABLE;
	vha->dpc_flags = 0;
	vha->flags.management_server_logged_in = 0;
	vha->marker_needed = 0;
	ha->isp_abort_cnt = 0;
	ha->beacon_blink_led = 0;

	set_bit(0, ha->req_qid_map);
	set_bit(0, ha->rsp_qid_map);

	ql_dbg(ql_dbg_init, vha, 0x0040,
	    "Configuring PCI space...\n");
	rval = ha->isp_ops->pci_config(vha);
	if (rval) {
		ql_log(ql_log_warn, vha, 0x0044,
		    "Unable to configure PCI space.\n");
		return (rval);
	}

	ha->isp_ops->reset_chip(vha);

	rval = qla2xxx_get_flash_info(vha);
	if (rval) {
		ql_log(ql_log_fatal, vha, 0x004f,
		    "Unable to validate FLASH data.\n");
		return rval;
	}

	if (IS_QLA8044(ha)) {
		qla8044_read_reset_template(vha);

		/* NOTE: If ql2xdontresethba==1, set IDC_CTRL DONTRESET_BIT0.
		 * If DONRESET_BIT0 is set, drivers should not set dev_state
		 * to NEED_RESET. But if NEED_RESET is set, drivers should
		 * should honor the reset. */
		if (ql2xdontresethba == 1)
			qla8044_set_idc_dontreset(vha);
	}

	ha->isp_ops->get_flash_version(vha, req->ring);
	ql_dbg(ql_dbg_init, vha, 0x0061,
	    "Configure NVRAM parameters...\n");

	ha->isp_ops->nvram_config(vha);

	if (ha->flags.disable_serdes) {
		/* Mask HBA via NVRAM settings? */
		ql_log(ql_log_info, vha, 0x0077,
		    "Masking HBA WWPN %8phN (via NVRAM).\n", vha->port_name);
		return QLA_FUNCTION_FAILED;
	}

	ql_dbg(ql_dbg_init, vha, 0x0078,
	    "Verifying loaded RISC code...\n");

	if (qla2x00_isp_firmware(vha) != QLA_SUCCESS) {
		rval = ha->isp_ops->chip_diag(vha);
		if (rval)
			return (rval);
		rval = qla2x00_setup_chip(vha);
		if (rval)
			return (rval);
	}

	if (IS_QLA84XX(ha)) {
		ha->cs84xx = qla84xx_get_chip(vha);
		if (!ha->cs84xx) {
			ql_log(ql_log_warn, vha, 0x00d0,
			    "Unable to configure ISP84XX.\n");
			return QLA_FUNCTION_FAILED;
		}
	}

	if (qla_ini_mode_enabled(vha))
		rval = qla2x00_init_rings(vha);

	ha->flags.chip_reset_done = 1;

	if (rval == QLA_SUCCESS && IS_QLA84XX(ha)) {
		/* Issue verify 84xx FW IOCB to complete 84xx initialization */
		rval = qla84xx_init_chip(vha);
		if (rval != QLA_SUCCESS) {
			ql_log(ql_log_warn, vha, 0x00d4,
			    "Unable to initialize ISP84XX.\n");
			qla84xx_put_chip(vha);
		}
	}

	/* Load the NIC Core f/w if we are the first protocol driver. */
	if (IS_QLA8031(ha)) {
		rval = qla83xx_nic_core_fw_load(vha);
		if (rval)
			ql_log(ql_log_warn, vha, 0x0124,
			    "Error in initializing NIC Core f/w.\n");
	}

	if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha))
		qla24xx_read_fcp_prio_cfg(vha);

	if (IS_P3P_TYPE(ha))
		qla82xx_set_driver_version(vha, QLA2XXX_VERSION);
	else
		qla25xx_set_driver_version(vha, QLA2XXX_VERSION);

	return (rval);
}

/**
 * qla2100_pci_config() - Setup ISP21xx PCI configuration registers.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla2100_pci_config(scsi_qla_host_t *vha)
{
	uint16_t w;
	unsigned long flags;
	struct qla_hw_data *ha = vha->hw;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

	pci_set_master(ha->pdev);
	pci_try_set_mwi(ha->pdev);

	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
	pci_write_config_word(ha->pdev, PCI_COMMAND, w);

	pci_disable_rom(ha->pdev);

	/* Get PCI bus information. */
	spin_lock_irqsave(&ha->hardware_lock, flags);
	ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
	spin_unlock_irqrestore(&ha->hardware_lock, flags);

	return QLA_SUCCESS;
}

/**
 * qla2300_pci_config() - Setup ISP23xx PCI configuration registers.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla2300_pci_config(scsi_qla_host_t *vha)
{
	uint16_t	w;
	unsigned long   flags = 0;
	uint32_t	cnt;
	struct qla_hw_data *ha = vha->hw;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

	pci_set_master(ha->pdev);
	pci_try_set_mwi(ha->pdev);

	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);

	if (IS_QLA2322(ha) || IS_QLA6322(ha))
		w &= ~PCI_COMMAND_INTX_DISABLE;
	pci_write_config_word(ha->pdev, PCI_COMMAND, w);

	/*
	 * If this is a 2300 card and not 2312, reset the
	 * COMMAND_INVALIDATE due to a bug in the 2300. Unfortunately,
	 * the 2310 also reports itself as a 2300 so we need to get the
	 * fb revision level -- a 6 indicates it really is a 2300 and
	 * not a 2310.
	 */
	if (IS_QLA2300(ha)) {
		spin_lock_irqsave(&ha->hardware_lock, flags);

		/* Pause RISC. */
		WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
		for (cnt = 0; cnt < 30000; cnt++) {
			if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
				break;

			udelay(10);
		}

		/* Select FPM registers. */
		WRT_REG_WORD(&reg->ctrl_status, 0x20);
		RD_REG_WORD(&reg->ctrl_status);

		/* Get the fb rev level */
		ha->fb_rev = RD_FB_CMD_REG(ha, reg);

		if (ha->fb_rev == FPM_2300)
			pci_clear_mwi(ha->pdev);

		/* Deselect FPM registers. */
		WRT_REG_WORD(&reg->ctrl_status, 0x0);
		RD_REG_WORD(&reg->ctrl_status);

		/* Release RISC module. */
		WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
		for (cnt = 0; cnt < 30000; cnt++) {
			if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) == 0)
				break;

			udelay(10);
		}

		spin_unlock_irqrestore(&ha->hardware_lock, flags);
	}

	pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);

	pci_disable_rom(ha->pdev);

	/* Get PCI bus information. */
	spin_lock_irqsave(&ha->hardware_lock, flags);
	ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
	spin_unlock_irqrestore(&ha->hardware_lock, flags);

	return QLA_SUCCESS;
}

/**
 * qla24xx_pci_config() - Setup ISP24xx PCI configuration registers.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla24xx_pci_config(scsi_qla_host_t *vha)
{
	uint16_t w;
	unsigned long flags = 0;
	struct qla_hw_data *ha = vha->hw;
	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

	pci_set_master(ha->pdev);
	pci_try_set_mwi(ha->pdev);

	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
	w &= ~PCI_COMMAND_INTX_DISABLE;
	pci_write_config_word(ha->pdev, PCI_COMMAND, w);

	pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);

	/* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */
	if (pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX))
		pcix_set_mmrbc(ha->pdev, 2048);

	/* PCIe -- adjust Maximum Read Request Size (2048). */
	if (pci_is_pcie(ha->pdev))
		pcie_set_readrq(ha->pdev, 4096);

	pci_disable_rom(ha->pdev);

	ha->chip_revision = ha->pdev->revision;

	/* Get PCI bus information. */
	spin_lock_irqsave(&ha->hardware_lock, flags);
	ha->pci_attr = RD_REG_DWORD(&reg->ctrl_status);
	spin_unlock_irqrestore(&ha->hardware_lock, flags);

	return QLA_SUCCESS;
}

/**
 * qla25xx_pci_config() - Setup ISP25xx PCI configuration registers.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla25xx_pci_config(scsi_qla_host_t *vha)
{
	uint16_t w;
	struct qla_hw_data *ha = vha->hw;

	pci_set_master(ha->pdev);
	pci_try_set_mwi(ha->pdev);

	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
	w &= ~PCI_COMMAND_INTX_DISABLE;
	pci_write_config_word(ha->pdev, PCI_COMMAND, w);

	/* PCIe -- adjust Maximum Read Request Size (2048). */
	if (pci_is_pcie(ha->pdev))
		pcie_set_readrq(ha->pdev, 4096);

	pci_disable_rom(ha->pdev);

	ha->chip_revision = ha->pdev->revision;

	return QLA_SUCCESS;
}

/**
 * qla2x00_isp_firmware() - Choose firmware image.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
static int
qla2x00_isp_firmware(scsi_qla_host_t *vha)
{
	int  rval;
	uint16_t loop_id, topo, sw_cap;
	uint8_t domain, area, al_pa;
	struct qla_hw_data *ha = vha->hw;

	/* Assume loading risc code */
	rval = QLA_FUNCTION_FAILED;

	if (ha->flags.disable_risc_code_load) {
		ql_log(ql_log_info, vha, 0x0079, "RISC CODE NOT loaded.\n");

		/* Verify checksum of loaded RISC code. */
		rval = qla2x00_verify_checksum(vha, ha->fw_srisc_address);
		if (rval == QLA_SUCCESS) {
			/* And, verify we are not in ROM code. */
			rval = qla2x00_get_adapter_id(vha, &loop_id, &al_pa,
			    &area, &domain, &topo, &sw_cap);
		}
	}

	if (rval)
		ql_dbg(ql_dbg_init, vha, 0x007a,
		    "**** Load RISC code ****.\n");

	return (rval);
}

/**
 * qla2x00_reset_chip() - Reset ISP chip.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
void
qla2x00_reset_chip(scsi_qla_host_t *vha)
{
	unsigned long   flags = 0;
	struct qla_hw_data *ha = vha->hw;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
	uint32_t	cnt;
	uint16_t	cmd;

	if (unlikely(pci_channel_offline(ha->pdev)))
		return;

	ha->isp_ops->disable_intrs(ha);

	spin_lock_irqsave(&ha->hardware_lock, flags);

	/* Turn off master enable */
	cmd = 0;
	pci_read_config_word(ha->pdev, PCI_COMMAND, &cmd);
	cmd &= ~PCI_COMMAND_MASTER;
	pci_write_config_word(ha->pdev, PCI_COMMAND, cmd);

	if (!IS_QLA2100(ha)) {
		/* Pause RISC. */
		WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
		if (IS_QLA2200(ha) || IS_QLA2300(ha)) {
			for (cnt = 0; cnt < 30000; cnt++) {
				if ((RD_REG_WORD(&reg->hccr) &
				    HCCR_RISC_PAUSE) != 0)
					break;
				udelay(100);
			}
		} else {
			RD_REG_WORD(&reg->hccr);	/* PCI Posting. */
			udelay(10);
		}

		/* Select FPM registers. */
		WRT_REG_WORD(&reg->ctrl_status, 0x20);
		RD_REG_WORD(&reg->ctrl_status);		/* PCI Posting. */

		/* FPM Soft Reset. */
		WRT_REG_WORD(&reg->fpm_diag_config, 0x100);
		RD_REG_WORD(&reg->fpm_diag_config);	/* PCI Posting. */

		/* Toggle Fpm Reset. */
		if (!IS_QLA2200(ha)) {
			WRT_REG_WORD(&reg->fpm_diag_config, 0x0);
			RD_REG_WORD(&reg->fpm_diag_config); /* PCI Posting. */
		}

		/* Select frame buffer registers. */
		WRT_REG_WORD(&reg->ctrl_status, 0x10);
		RD_REG_WORD(&reg->ctrl_status);		/* PCI Posting. */

		/* Reset frame buffer FIFOs. */
		if (IS_QLA2200(ha)) {
			WRT_FB_CMD_REG(ha, reg, 0xa000);
			RD_FB_CMD_REG(ha, reg);		/* PCI Posting. */
		} else {
			WRT_FB_CMD_REG(ha, reg, 0x00fc);

			/* Read back fb_cmd until zero or 3 seconds max */
			for (cnt = 0; cnt < 3000; cnt++) {
				if ((RD_FB_CMD_REG(ha, reg) & 0xff) == 0)
					break;
				udelay(100);
			}
		}

		/* Select RISC module registers. */
		WRT_REG_WORD(&reg->ctrl_status, 0);
		RD_REG_WORD(&reg->ctrl_status);		/* PCI Posting. */

		/* Reset RISC processor. */
		WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
		RD_REG_WORD(&reg->hccr);		/* PCI Posting. */

		/* Release RISC processor. */
		WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
		RD_REG_WORD(&reg->hccr);		/* PCI Posting. */
	}

	WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
	WRT_REG_WORD(&reg->hccr, HCCR_CLR_HOST_INT);

	/* Reset ISP chip. */
	WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);

	/* Wait for RISC to recover from reset. */
	if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
		/*
		 * It is necessary to for a delay here since the card doesn't
		 * respond to PCI reads during a reset. On some architectures
		 * this will result in an MCA.
		 */
		udelay(20);
		for (cnt = 30000; cnt; cnt--) {
			if ((RD_REG_WORD(&reg->ctrl_status) &
			    CSR_ISP_SOFT_RESET) == 0)
				break;
			udelay(100);
		}
	} else
		udelay(10);

	/* Reset RISC processor. */
	WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);

	WRT_REG_WORD(&reg->semaphore, 0);

	/* Release RISC processor. */
	WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
	RD_REG_WORD(&reg->hccr);			/* PCI Posting. */

	if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
		for (cnt = 0; cnt < 30000; cnt++) {
			if (RD_MAILBOX_REG(ha, reg, 0) != MBS_BUSY)
				break;

			udelay(100);
		}
	} else
		udelay(100);

	/* Turn on master enable */
	cmd |= PCI_COMMAND_MASTER;
	pci_write_config_word(ha->pdev, PCI_COMMAND, cmd);

	/* Disable RISC pause on FPM parity error. */
	if (!IS_QLA2100(ha)) {
		WRT_REG_WORD(&reg->hccr, HCCR_DISABLE_PARITY_PAUSE);
		RD_REG_WORD(&reg->hccr);		/* PCI Posting. */
	}

	spin_unlock_irqrestore(&ha->hardware_lock, flags);
}

/**
 * qla81xx_reset_mpi() - Reset's MPI FW via Write MPI Register MBC.
 *
 * Returns 0 on success.
 */
static int
qla81xx_reset_mpi(scsi_qla_host_t *vha)
{
	uint16_t mb[4] = {0x1010, 0, 1, 0};

	if (!IS_QLA81XX(vha->hw))
		return QLA_SUCCESS;

	return qla81xx_write_mpi_register(vha, mb);
}

/**
 * qla24xx_reset_risc() - Perform full reset of ISP24xx RISC.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
static inline int
qla24xx_reset_risc(scsi_qla_host_t *vha)
{
	unsigned long flags = 0;
	struct qla_hw_data *ha = vha->hw;
	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
	uint32_t cnt;
	uint16_t wd;
	static int abts_cnt; /* ISP abort retry counts */
	int rval = QLA_SUCCESS;

	spin_lock_irqsave(&ha->hardware_lock, flags);

	/* Reset RISC. */
	WRT_REG_DWORD(&reg->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
	for (cnt = 0; cnt < 30000; cnt++) {
		if ((RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE) == 0)
			break;

		udelay(10);
	}

	if (!(RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE))
		set_bit(DMA_SHUTDOWN_CMPL, &ha->fw_dump_cap_flags);

	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x017e,
	    "HCCR: 0x%x, Control Status %x, DMA active status:0x%x\n",
	    RD_REG_DWORD(&reg->hccr),
	    RD_REG_DWORD(&reg->ctrl_status),
	    (RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE));

	WRT_REG_DWORD(&reg->ctrl_status,
	    CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
	pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);

	udelay(100);

	/* Wait for firmware to complete NVRAM accesses. */
	RD_REG_WORD(&reg->mailbox0);
	for (cnt = 10000; RD_REG_WORD(&reg->mailbox0) != 0 &&
	    rval == QLA_SUCCESS; cnt--) {
		barrier();
		if (cnt)
			udelay(5);
		else
			rval = QLA_FUNCTION_TIMEOUT;
	}

	if (rval == QLA_SUCCESS)
		set_bit(ISP_MBX_RDY, &ha->fw_dump_cap_flags);

	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x017f,
	    "HCCR: 0x%x, MailBox0 Status 0x%x\n",
	    RD_REG_DWORD(&reg->hccr),
	    RD_REG_DWORD(&reg->mailbox0));

	/* Wait for soft-reset to complete. */
	RD_REG_DWORD(&reg->ctrl_status);
	for (cnt = 0; cnt < 60; cnt++) {
		barrier();
		if ((RD_REG_DWORD(&reg->ctrl_status) &
		    CSRX_ISP_SOFT_RESET) == 0)
			break;

		udelay(5);
	}
	if (!(RD_REG_DWORD(&reg->ctrl_status) & CSRX_ISP_SOFT_RESET))
		set_bit(ISP_SOFT_RESET_CMPL, &ha->fw_dump_cap_flags);

	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015d,
	    "HCCR: 0x%x, Soft Reset status: 0x%x\n",
	    RD_REG_DWORD(&reg->hccr),
	    RD_REG_DWORD(&reg->ctrl_status));

	/* If required, do an MPI FW reset now */
	if (test_and_clear_bit(MPI_RESET_NEEDED, &vha->dpc_flags)) {
		if (qla81xx_reset_mpi(vha) != QLA_SUCCESS) {
			if (++abts_cnt < 5) {
				set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
				set_bit(MPI_RESET_NEEDED, &vha->dpc_flags);
			} else {
				/*
				 * We exhausted the ISP abort retries. We have to
				 * set the board offline.
				 */
				abts_cnt = 0;
				vha->flags.online = 0;
			}
		}
	}

	WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
	RD_REG_DWORD(&reg->hccr);

	WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
	RD_REG_DWORD(&reg->hccr);

	WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_RESET);
	RD_REG_DWORD(&reg->hccr);

	RD_REG_WORD(&reg->mailbox0);
	for (cnt = 60; RD_REG_WORD(&reg->mailbox0) != 0 &&
	    rval == QLA_SUCCESS; cnt--) {
		barrier();
		if (cnt)
			udelay(5);
		else
			rval = QLA_FUNCTION_TIMEOUT;
	}
	if (rval == QLA_SUCCESS)
		set_bit(RISC_RDY_AFT_RESET, &ha->fw_dump_cap_flags);

	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015e,
	    "Host Risc 0x%x, mailbox0 0x%x\n",
	    RD_REG_DWORD(&reg->hccr),
	     RD_REG_WORD(&reg->mailbox0));

	spin_unlock_irqrestore(&ha->hardware_lock, flags);

	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015f,
	    "Driver in %s mode\n",
	    IS_NOPOLLING_TYPE(ha) ? "Interrupt" : "Polling");

	if (IS_NOPOLLING_TYPE(ha))
		ha->isp_ops->enable_intrs(ha);

	return rval;
}

static void
qla25xx_read_risc_sema_reg(scsi_qla_host_t *vha, uint32_t *data)
{
	struct device_reg_24xx __iomem *reg = &vha->hw->iobase->isp24;

	WRT_REG_DWORD(&reg->iobase_addr, RISC_REGISTER_BASE_OFFSET);
	*data = RD_REG_DWORD(&reg->iobase_window + RISC_REGISTER_WINDOW_OFFET);

}

static void
qla25xx_write_risc_sema_reg(scsi_qla_host_t *vha, uint32_t data)
{
	struct device_reg_24xx __iomem *reg = &vha->hw->iobase->isp24;

	WRT_REG_DWORD(&reg->iobase_addr, RISC_REGISTER_BASE_OFFSET);
	WRT_REG_DWORD(&reg->iobase_window + RISC_REGISTER_WINDOW_OFFET, data);
}

static void
qla25xx_manipulate_risc_semaphore(scsi_qla_host_t *vha)
{
	uint32_t wd32 = 0;
	uint delta_msec = 100;
	uint elapsed_msec = 0;
	uint timeout_msec;
	ulong n;

	if (vha->hw->pdev->subsystem_device != 0x0175 &&
	    vha->hw->pdev->subsystem_device != 0x0240)
		return;

	WRT_REG_DWORD(&vha->hw->iobase->isp24.hccr, HCCRX_SET_RISC_PAUSE);
	udelay(100);

attempt:
	timeout_msec = TIMEOUT_SEMAPHORE;
	n = timeout_msec / delta_msec;
	while (n--) {
		qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_SET);
		qla25xx_read_risc_sema_reg(vha, &wd32);
		if (wd32 & RISC_SEMAPHORE)
			break;
		msleep(delta_msec);
		elapsed_msec += delta_msec;
		if (elapsed_msec > TIMEOUT_TOTAL_ELAPSED)
			goto force;
	}

	if (!(wd32 & RISC_SEMAPHORE))
		goto force;

	if (!(wd32 & RISC_SEMAPHORE_FORCE))
		goto acquired;

	qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_CLR);
	timeout_msec = TIMEOUT_SEMAPHORE_FORCE;
	n = timeout_msec / delta_msec;
	while (n--) {
		qla25xx_read_risc_sema_reg(vha, &wd32);
		if (!(wd32 & RISC_SEMAPHORE_FORCE))
			break;
		msleep(delta_msec);
		elapsed_msec += delta_msec;
		if (elapsed_msec > TIMEOUT_TOTAL_ELAPSED)
			goto force;
	}

	if (wd32 & RISC_SEMAPHORE_FORCE)
		qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_FORCE_CLR);

	goto attempt;

force:
	qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_FORCE_SET);

acquired:
	return;
}

/**
 * qla24xx_reset_chip() - Reset ISP24xx chip.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
void
qla24xx_reset_chip(scsi_qla_host_t *vha)
{
	struct qla_hw_data *ha = vha->hw;

	if (pci_channel_offline(ha->pdev) &&
	    ha->flags.pci_channel_io_perm_failure) {
		return;
	}

	ha->isp_ops->disable_intrs(ha);

	qla25xx_manipulate_risc_semaphore(vha);

	/* Perform RISC reset. */
	qla24xx_reset_risc(vha);
}

/**
 * qla2x00_chip_diag() - Test chip for proper operation.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla2x00_chip_diag(scsi_qla_host_t *vha)
{
	int		rval;
	struct qla_hw_data *ha = vha->hw;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
	unsigned long	flags = 0;
	uint16_t	data;
	uint32_t	cnt;
	uint16_t	mb[5];
	struct req_que *req = ha->req_q_map[0];

	/* Assume a failed state */
	rval = QLA_FUNCTION_FAILED;

	ql_dbg(ql_dbg_init, vha, 0x007b,
	    "Testing device at %lx.\n", (u_long)&reg->flash_address);

	spin_lock_irqsave(&ha->hardware_lock, flags);

	/* Reset ISP chip. */
	WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);

	/*
	 * We need to have a delay here since the card will not respond while
	 * in reset causing an MCA on some architectures.
	 */
	udelay(20);
	data = qla2x00_debounce_register(&reg->ctrl_status);
	for (cnt = 6000000 ; cnt && (data & CSR_ISP_SOFT_RESET); cnt--) {
		udelay(5);
		data = RD_REG_WORD(&reg->ctrl_status);
		barrier();
	}

	if (!cnt)
		goto chip_diag_failed;

	ql_dbg(ql_dbg_init, vha, 0x007c,
	    "Reset register cleared by chip reset.\n");

	/* Reset RISC processor. */
	WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
	WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);

	/* Workaround for QLA2312 PCI parity error */
	if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
		data = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 0));
		for (cnt = 6000000; cnt && (data == MBS_BUSY); cnt--) {
			udelay(5);
			data = RD_MAILBOX_REG(ha, reg, 0);
			barrier();
		}
	} else
		udelay(10);

	if (!cnt)
		goto chip_diag_failed;

	/* Check product ID of chip */
	ql_dbg(ql_dbg_init, vha, 0x007d, "Checking product Id of chip.\n");

	mb[1] = RD_MAILBOX_REG(ha, reg, 1);
	mb[2] = RD_MAILBOX_REG(ha, reg, 2);
	mb[3] = RD_MAILBOX_REG(ha, reg, 3);
	mb[4] = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 4));
	if (mb[1] != PROD_ID_1 || (mb[2] != PROD_ID_2 && mb[2] != PROD_ID_2a) ||
	    mb[3] != PROD_ID_3) {
		ql_log(ql_log_warn, vha, 0x0062,
		    "Wrong product ID = 0x%x,0x%x,0x%x.\n",
		    mb[1], mb[2], mb[3]);

		goto chip_diag_failed;
	}
	ha->product_id[0] = mb[1];
	ha->product_id[1] = mb[2];
	ha->product_id[2] = mb[3];
	ha->product_id[3] = mb[4];

	/* Adjust fw RISC transfer size */
	if (req->length > 1024)
		ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024;
	else
		ha->fw_transfer_size = REQUEST_ENTRY_SIZE *
		    req->length;

	if (IS_QLA2200(ha) &&
	    RD_MAILBOX_REG(ha, reg, 7) == QLA2200A_RISC_ROM_VER) {
		/* Limit firmware transfer size with a 2200A */
		ql_dbg(ql_dbg_init, vha, 0x007e, "Found QLA2200A Chip.\n");

		ha->device_type |= DT_ISP2200A;
		ha->fw_transfer_size = 128;
	}

	/* Wrap Incoming Mailboxes Test. */
	spin_unlock_irqrestore(&ha->hardware_lock, flags);

	ql_dbg(ql_dbg_init, vha, 0x007f, "Checking mailboxes.\n");
	rval = qla2x00_mbx_reg_test(vha);
	if (rval)
		ql_log(ql_log_warn, vha, 0x0080,
		    "Failed mailbox send register test.\n");
	else
		/* Flag a successful rval */
		rval = QLA_SUCCESS;
	spin_lock_irqsave(&ha->hardware_lock, flags);

chip_diag_failed:
	if (rval)
		ql_log(ql_log_info, vha, 0x0081,
		    "Chip diagnostics **** FAILED ****.\n");

	spin_unlock_irqrestore(&ha->hardware_lock, flags);

	return (rval);
}

/**
 * qla24xx_chip_diag() - Test ISP24xx for proper operation.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
int
qla24xx_chip_diag(scsi_qla_host_t *vha)
{
	int rval;
	struct qla_hw_data *ha = vha->hw;
	struct req_que *req = ha->req_q_map[0];

	if (IS_P3P_TYPE(ha))
		return QLA_SUCCESS;

	ha->fw_transfer_size = REQUEST_ENTRY_SIZE * req->length;

	rval = qla2x00_mbx_reg_test(vha);
	if (rval) {
		ql_log(ql_log_warn, vha, 0x0082,
		    "Failed mailbox send register test.\n");
	} else {
		/* Flag a successful rval */
		rval = QLA_SUCCESS;
	}

	return rval;
}

void
qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
{
	int rval;
	uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size,
	    eft_size, fce_size, mq_size;
	dma_addr_t tc_dma;
	void *tc;
	struct qla_hw_data *ha = vha->hw;
	struct req_que *req = ha->req_q_map[0];
	struct rsp_que *rsp = ha->rsp_q_map[0];

	if (ha->fw_dump) {
		ql_dbg(ql_dbg_init, vha, 0x00bd,
		    "Firmware dump already allocated.\n");
		return;
	}

	ha->fw_dumped = 0;
	ha->fw_dump_cap_flags = 0;
	dump_size = fixed_size = mem_size = eft_size = fce_size = mq_size = 0;
	req_q_size = rsp_q_size = 0;

	if (IS_QLA27XX(ha))
		goto try_fce;

	if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
		fixed_size = sizeof(struct qla2100_fw_dump);
	} else if (IS_QLA23XX(ha)) {
		fixed_size = offsetof(struct qla2300_fw_dump, data_ram);
		mem_size = (ha->fw_memory_size - 0x11000 + 1) *
		    sizeof(uint16_t);
	} else if (IS_FWI2_CAPABLE(ha)) {
		if (IS_QLA83XX(ha) || IS_QLA27XX(ha))
			fixed_size = offsetof(struct qla83xx_fw_dump, ext_mem);
		else if (IS_QLA81XX(ha))
			fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem);
		else if (IS_QLA25XX(ha))
			fixed_size = offsetof(struct qla25xx_fw_dump, ext_mem);
		else
			fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem);

		mem_size = (ha->fw_memory_size - 0x100000 + 1) *
		    sizeof(uint32_t);
		if (ha->mqenable) {
			if (!IS_QLA83XX(ha) && !IS_QLA27XX(ha))
				mq_size = sizeof(struct qla2xxx_mq_chain);
			/*
			 * Allocate maximum buffer size for all queues.
			 * Resizing must be done at end-of-dump processing.
			 */
			mq_size += ha->max_req_queues *
			    (req->length * sizeof(request_t));
			mq_size += ha->max_rsp_queues *
			    (rsp->length * sizeof(response_t));
		}
		if (ha->tgt.atio_ring)
			mq_size += ha->tgt.atio_q_length * sizeof(request_t);
		/* Allocate memory for Fibre Channel Event Buffer. */
		if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
		    !IS_QLA27XX(ha))
			goto try_eft;

try_fce:
		if (ha->fce)
			dma_free_coherent(&ha->pdev->dev,
			    FCE_SIZE, ha->fce, ha->fce_dma);

		/* Allocate memory for Fibre Channel Event Buffer. */
		tc = dma_zalloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
					 GFP_KERNEL);
		if (!tc) {
			ql_log(ql_log_warn, vha, 0x00be,
			    "Unable to allocate (%d KB) for FCE.\n",
			    FCE_SIZE / 1024);
			goto try_eft;
		}

		rval = qla2x00_enable_fce_trace(vha, tc_dma, FCE_NUM_BUFFERS,
		    ha->fce_mb, &ha->fce_bufs);
		if (rval) {
			ql_log(ql_log_warn, vha, 0x00bf,
			    "Unable to initialize FCE (%d).\n", rval);
			dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc,
			    tc_dma);
			ha->flags.fce_enabled = 0;
			goto try_eft;
		}
		ql_dbg(ql_dbg_init, vha, 0x00c0,
		    "Allocate (%d KB) for FCE...\n", FCE_SIZE / 1024);

		fce_size = sizeof(struct qla2xxx_fce_chain) + FCE_SIZE;
		ha->flags.fce_enabled = 1;
		ha->fce_dma = tc_dma;
		ha->fce = tc;

try_eft:
		if (ha->eft)
			dma_free_coherent(&ha->pdev->dev,
			    EFT_SIZE, ha->eft, ha->eft_dma);

		/* Allocate memory for Extended Trace Buffer. */
		tc = dma_zalloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
					 GFP_KERNEL);
		if (!tc) {
			ql_log(ql_log_warn, vha, 0x00c1,
			    "Unable to allocate (%d KB) for EFT.\n",
			    EFT_SIZE / 1024);
			goto cont_alloc;
		}

		rval = qla2x00_enable_eft_trace(vha, tc_dma, EFT_NUM_BUFFERS);
		if (rval) {
			ql_log(ql_log_warn, vha, 0x00c2,
			    "Unable to initialize EFT (%d).\n", rval);
			dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
			    tc_dma);
			goto cont_alloc;
		}
		ql_dbg(ql_dbg_init, vha, 0x00c3,
		    "Allocated (%d KB) EFT ...\n", EFT_SIZE / 1024);

		eft_size = EFT_SIZE;
		ha->eft_dma = tc_dma;
		ha->eft = tc;
	}

cont_alloc:
	if (IS_QLA27XX(ha)) {
		if (!ha->fw_dump_template) {
			ql_log(ql_log_warn, vha, 0x00ba,
			    "Failed missing fwdump template\n");
			return;
		}
		dump_size = qla27xx_fwdt_calculate_dump_size(vha);
		ql_dbg(ql_dbg_init, vha, 0x00fa,
		    "-> allocating fwdump (%x bytes)...\n", dump_size);
		goto allocate;
	}

	req_q_size = req->length * sizeof(request_t);
	rsp_q_size = rsp->length * sizeof(response_t);
	dump_size = offsetof(struct qla2xxx_fw_dump, isp);
	dump_size += fixed_size + mem_size + req_q_size + rsp_q_size + eft_size;
	ha->chain_offset = dump_size;
	dump_size += mq_size + fce_size;

allocate:
	ha->fw_dump = vmalloc(dump_size);
	if (!ha->fw_dump) {
		ql_log(ql_log_warn, vha, 0x00c4,
		    "Unable to allocate (%d KB) for firmware dump.\n",
		    dump_size / 1024);

		if (ha->fce) {
			dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce,
			    ha->fce_dma);
			ha->fce = NULL;
			ha->fce_dma = 0;
		}

		if (ha->eft) {
			dma_free_coherent(&ha->pdev->dev, eft_size, ha->eft,
			    ha->eft_dma);
			ha->eft = NULL;
			ha->eft_dma = 0;
		}
		return;
	}
	ha->fw_dump_len = dump_size;
	ql_dbg(ql_dbg_init, vha, 0x00c5,
	    "Allocated (%d KB) for firmware dump.\n", dump_size / 1024);

	if (IS_QLA27XX(ha))
		return;

	ha->fw_dump->signature[0] = 'Q';
	ha->fw_dump->signature[1] = 'L';
	ha->fw_dump->signature[2] = 'G';
	ha->fw_dump->signature[3] = 'C';
	ha->fw_dump->version = htonl(1);

	ha->fw_dump->fixed_size = htonl(fixed_size);
	ha->fw_dump->mem_size = htonl(mem_size);
	ha->fw_dump->req_q_size = htonl(req_q_size);
	ha->fw_dump->rsp_q_size = htonl(rsp_q_size);

	ha->fw_dump->eft_size = htonl(eft_size);
	ha->fw_dump->eft_addr_l = htonl(LSD(ha->eft_dma));
	ha->fw_dump->eft_addr_h = htonl(MSD(ha->eft_dma));

	ha->fw_dump->header_size =
	    htonl(offsetof(struct qla2xxx_fw_dump, isp));
}

static int
qla81xx_mpi_sync(scsi_qla_host_t *vha)
{
#define MPS_MASK	0xe0
	int rval;
	uint16_t dc;
	uint32_t dw;

	if (!IS_QLA81XX(vha->hw))
		return QLA_SUCCESS;

	rval = qla2x00_write_ram_word(vha, 0x7c00, 1);
	if (rval != QLA_SUCCESS) {
		ql_log(ql_log_warn, vha, 0x0105,
		    "Unable to acquire semaphore.\n");
		goto done;
	}

	pci_read_config_word(vha->hw->pdev, 0x54, &dc);
	rval = qla2x00_read_ram_word(vha, 0x7a15, &dw);
	if (rval != QLA_SUCCESS) {
		ql_log(ql_log_warn, vha, 0x0067, "Unable to read sync.\n");
		goto done_release;
	}

	dc &= MPS_MASK;
	if (dc == (dw & MPS_MASK))
		goto done_release;

	dw &= ~MPS_MASK;
	dw |= dc;
	rval = qla2x00_write_ram_word(vha, 0x7a15, dw);
	if (rval != QLA_SUCCESS) {
		ql_log(ql_log_warn, vha, 0x0114, "Unable to gain sync.\n");
	}

done_release:
	rval = qla2x00_write_ram_word(vha, 0x7c00, 0);
	if (rval != QLA_SUCCESS) {
		ql_log(ql_log_warn, vha, 0x006d,
		    "Unable to release semaphore.\n");
	}

done:
	return rval;
}

int
qla2x00_alloc_outstanding_cmds(struct qla_hw_data *ha, struct req_que *req)
{
	/* Don't try to reallocate the array */
	if (req->outstanding_cmds)
		return QLA_SUCCESS;

	if (!IS_FWI2_CAPABLE(ha))
		req->num_outstanding_cmds = DEFAULT_OUTSTANDING_COMMANDS;
	else {
		if (ha->cur_fw_xcb_count <= ha->cur_fw_iocb_count)
			req->num_outstanding_cmds = ha->cur_fw_xcb_count;
		else
			req->num_outstanding_cmds = ha->cur_fw_iocb_count;
	}

	req->outstanding_cmds = kzalloc(sizeof(srb_t *) *
	    req->num_outstanding_cmds, GFP_KERNEL);

	if (!req->outstanding_cmds) {
		/*
		 * Try to allocate a minimal size just so we can get through
		 * initialization.
		 */
		req->num_outstanding_cmds = MIN_OUTSTANDING_COMMANDS;
		req->outstanding_cmds = kzalloc(sizeof(srb_t *) *
		    req->num_outstanding_cmds, GFP_KERNEL);

		if (!req->outstanding_cmds) {
			ql_log(ql_log_fatal, NULL, 0x0126,
			    "Failed to allocate memory for "
			    "outstanding_cmds for req_que %p.\n", req);
			req->num_outstanding_cmds = 0;
			return QLA_FUNCTION_FAILED;
		}
	}

	return QLA_SUCCESS;
}

/**
 * qla2x00_setup_chip() - Load and start RISC firmware.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
static int
qla2x00_setup_chip(scsi_qla_host_t *vha)
{
	int rval;
	uint32_t srisc_address = 0;
	struct qla_hw_data *ha = vha->hw;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
	unsigned long flags;
	uint16_t fw_major_version;

	if (IS_P3P_TYPE(ha)) {
		rval = ha->isp_ops->load_risc(vha, &srisc_address);
		if (rval == QLA_SUCCESS) {
			qla2x00_stop_firmware(vha);
			goto enable_82xx_npiv;
		} else
			goto failed;
	}

	if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
		/* Disable SRAM, Instruction RAM and GP RAM parity.  */
		spin_lock_irqsave(&ha->hardware_lock, flags);
		WRT_REG_WORD(&reg->hccr, (HCCR_ENABLE_PARITY + 0x0));
		RD_REG_WORD(&reg->hccr);
		spin_unlock_irqrestore(&ha->hardware_lock, flags);
	}

	qla81xx_mpi_sync(vha);

	/* Load firmware sequences */
	rval = ha->isp_ops->load_risc(vha, &srisc_address);
	if (rval == QLA_SUCCESS) {
		ql_dbg(ql_dbg_init, vha, 0x00c9,
		    "Verifying Checksum of loaded RISC code.\n");

		rval = qla2x00_verify_checksum(vha, srisc_address);
		if (rval == QLA_SUCCESS) {
			/* Start firmware execution. */
			ql_dbg(ql_dbg_init, vha, 0x00ca,
			    "Starting firmware.\n");

			if (ql2xexlogins)
				ha->flags.exlogins_enabled = 1;

			if (ql2xexchoffld)
				ha->flags.exchoffld_enabled = 1;

			rval = qla2x00_execute_fw(vha, srisc_address);
			/* Retrieve firmware information. */
			if (rval == QLA_SUCCESS) {
				rval = qla2x00_set_exlogins_buffer(vha);
				if (rval != QLA_SUCCESS)
					goto failed;

				rval = qla2x00_set_exchoffld_buffer(vha);
				if (rval != QLA_SUCCESS)
					goto failed;

enable_82xx_npiv:
				fw_major_version = ha->fw_major_version;
				if (IS_P3P_TYPE(ha))
					qla82xx_check_md_needed(vha);
				else
					rval = qla2x00_get_fw_version(vha);
				if (rval != QLA_SUCCESS)
					goto failed;
				ha->flags.npiv_supported = 0;
				if (IS_QLA2XXX_MIDTYPE(ha) &&
					 (ha->fw_attributes & BIT_2)) {
					ha->flags.npiv_supported = 1;
					if ((!ha->max_npiv_vports) ||
					    ((ha->max_npiv_vports + 1) %
					    MIN_MULTI_ID_FABRIC))
						ha->max_npiv_vports =
						    MIN_MULTI_ID_FABRIC - 1;
				}
				qla2x00_get_resource_cnts(vha);

				/*
				 * Allocate the array of outstanding commands
				 * now that we know the firmware resources.
				 */
				rval = qla2x00_alloc_outstanding_cmds(ha,
				    vha->req);
				if (rval != QLA_SUCCESS)
					goto failed;

				if (!fw_major_version && ql2xallocfwdump
				    && !(IS_P3P_TYPE(ha)))
					qla2x00_alloc_fw_dump(vha);
			} else {
				goto failed;
			}
		} else {
			ql_log(ql_log_fatal, vha, 0x00cd,
			    "ISP Firmware failed checksum.\n");
			goto failed;
		}
	} else
		goto failed;

	if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
		/* Enable proper parity. */
		spin_lock_irqsave(&ha->hardware_lock, flags);
		if (IS_QLA2300(ha))
			/* SRAM parity */
			WRT_REG_WORD(&reg->hccr, HCCR_ENABLE_PARITY + 0x1);
		else
			/* SRAM, Instruction RAM and GP RAM parity */
			WRT_REG_WORD(&reg->hccr, HCCR_ENABLE_PARITY + 0x7);
		RD_REG_WORD(&reg->hccr);
		spin_unlock_irqrestore(&ha->hardware_lock, flags);
	}

	if (IS_QLA27XX(ha))
		ha->flags.fac_supported = 1;
	else if (rval == QLA_SUCCESS && IS_FAC_REQUIRED(ha)) {
		uint32_t size;

		rval = qla81xx_fac_get_sector_size(vha, &size);
		if (rval == QLA_SUCCESS) {
			ha->flags.fac_supported = 1;
			ha->fdt_block_size = size << 2;
		} else {
			ql_log(ql_log_warn, vha, 0x00ce,
			    "Unsupported FAC firmware (%d.%02d.%02d).\n",
			    ha->fw_major_version, ha->fw_minor_version,
			    ha->fw_subminor_version);

			if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
				ha->flags.fac_supported = 0;
				rval = QLA_SUCCESS;
			}
		}
	}
failed:
	if (rval) {
		ql_log(ql_log_fatal, vha, 0x00cf,
		    "Setup chip ****FAILED****.\n");
	}

	return (rval);
}

/**
 * qla2x00_init_response_q_entries() - Initializes response queue entries.
 * @ha: HA context
 *
 * Beginning of request ring has initialization control block already built
 * by nvram config routine.
 *
 * Returns 0 on success.
 */
void
qla2x00_init_response_q_entries(struct rsp_que *rsp)
{
	uint16_t cnt;
	response_t *pkt;

	rsp->ring_ptr = rsp->ring;
	rsp->ring_index    = 0;
	rsp->status_srb = NULL;
	pkt = rsp->ring_ptr;
	for (cnt = 0; cnt < rsp->length; cnt++) {
		pkt->signature = RESPONSE_PROCESSED;
		pkt++;
	}
}

/**
 * qla2x00_update_fw_options() - Read and process firmware options.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
void
qla2x00_update_fw_options(scsi_qla_host_t *vha)
{
	uint16_t swing, emphasis, tx_sens, rx_sens;
	struct qla_hw_data *ha = vha->hw;

	memset(ha->fw_options, 0, sizeof(ha->fw_options));
	qla2x00_get_fw_options(vha, ha->fw_options);

	if (IS_QLA2100(ha) || IS_QLA2200(ha))
		return;

	/* Serial Link options. */
	ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x0115,
	    "Serial link options.\n");
	ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0109,
	    (uint8_t *)&ha->fw_seriallink_options,
	    sizeof(ha->fw_seriallink_options));

	ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
	if (ha->fw_seriallink_options[3] & BIT_2) {
		ha->fw_options[1] |= FO1_SET_EMPHASIS_SWING;

		/*  1G settings */
		swing = ha->fw_seriallink_options[2] & (BIT_2 | BIT_1 | BIT_0);
		emphasis = (ha->fw_seriallink_options[2] &
		    (BIT_4 | BIT_3)) >> 3;
		tx_sens = ha->fw_seriallink_options[0] &
		    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
		rx_sens = (ha->fw_seriallink_options[0] &
		    (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
		ha->fw_options[10] = (emphasis << 14) | (swing << 8);
		if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
			if (rx_sens == 0x0)
				rx_sens = 0x3;
			ha->fw_options[10] |= (tx_sens << 4) | rx_sens;
		} else if (IS_QLA2322(ha) || IS_QLA6322(ha))
			ha->fw_options[10] |= BIT_5 |
			    ((rx_sens & (BIT_1 | BIT_0)) << 2) |
			    (tx_sens & (BIT_1 | BIT_0));

		/*  2G settings */
		swing = (ha->fw_seriallink_options[2] &
		    (BIT_7 | BIT_6 | BIT_5)) >> 5;
		emphasis = ha->fw_seriallink_options[3] & (BIT_1 | BIT_0);
		tx_sens = ha->fw_seriallink_options[1] &
		    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
		rx_sens = (ha->fw_seriallink_options[1] &
		    (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
		ha->fw_options[11] = (emphasis << 14) | (swing << 8);
		if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
			if (rx_sens == 0x0)
				rx_sens = 0x3;
			ha->fw_options[11] |= (tx_sens << 4) | rx_sens;
		} else if (IS_QLA2322(ha) || IS_QLA6322(ha))
			ha->fw_options[11] |= BIT_5 |
			    ((rx_sens & (BIT_1 | BIT_0)) << 2) |
			    (tx_sens & (BIT_1 | BIT_0));
	}

	/* FCP2 options. */
	/*  Return command IOCBs without waiting for an ABTS to complete. */
	ha->fw_options[3] |= BIT_13;

	/* LED scheme. */
	if (ha->flags.enable_led_scheme)
		ha->fw_options[2] |= BIT_12;

	/* Detect ISP6312. */
	if (IS_QLA6312(ha))
		ha->fw_options[2] |= BIT_13;

	/* Set Retry FLOGI in case of P2P connection */
	if (ha->operating_mode == P2P) {
		ha->fw_options[2] |= BIT_3;
		ql_dbg(ql_dbg_disc, vha, 0x2100,
		    "(%s): Setting FLOGI retry BIT in fw_options[2]: 0x%x\n",
			__func__, ha->fw_options[2]);
	}

	/* Update firmware options. */
	qla2x00_set_fw_options(vha, ha->fw_options);
}

void
qla24xx_update_fw_options(scsi_qla_host_t *vha)
{
	int rval;
	struct qla_hw_data *ha = vha->hw;

	if (IS_P3P_TYPE(ha))
		return;

	/*  Hold status IOCBs until ABTS response received. */
	if (ql2xfwholdabts)
		ha->fw_options[3] |= BIT_12;

	/* Set Retry FLOGI in case of P2P connection */
	if (ha->operating_mode == P2P) {
		ha->fw_options[2] |= BIT_3;
		ql_dbg(ql_dbg_disc, vha, 0x2101,
		    "(%s): Setting FLOGI retry BIT in fw_options[2]: 0x%x\n",
			__func__, ha->fw_options[2]);
	}

	/* Update Serial Link options. */
	if ((le16_to_cpu(ha->fw_seriallink_options24[0]) & BIT_0) == 0)
		return;

	rval = qla2x00_set_serdes_params(vha,
	    le16_to_cpu(ha->fw_seriallink_options24[1]),
	    le16_to_cpu(ha->fw_seriallink_options24[2]),
	    le16_to_cpu(ha->fw_seriallink_options24[3]));
	if (rval != QLA_SUCCESS) {
		ql_log(ql_log_warn, vha, 0x0104,
		    "Unable to update Serial Link options (%x).\n", rval);
	}
}

void
qla2x00_config_rings(struct scsi_qla_host *vha)
{
	struct qla_hw_data *ha = vha->hw;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
	struct req_que *req = ha->req_q_map[0];
	struct rsp_que *rsp = ha->rsp_q_map[0];

	/* Setup ring parameters in initialization control block. */
	ha->init_cb->request_q_outpointer = cpu_to_le16(0);
	ha->init_cb->response_q_inpointer = cpu_to_le16(0);
	ha->init_cb->request_q_length = cpu_to_le16(req->length);
	ha->init_cb->response_q_length = cpu_to_le16(rsp->length);
	ha->init_cb->request_q_address[0] = cpu_to_le32(LSD(req->dma));
	ha->init_cb->request_q_address[1] = cpu_to_le32(MSD(req->dma));
	ha->init_cb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma));
	ha->init_cb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma));

	WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0);
	WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0);
	WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0);
	WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0);
	RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg));		/* PCI Posting. */
}

void
qla24xx_config_rings(struct scsi_qla_host *vha)
{
	struct qla_hw_data *ha = vha->hw;
	device_reg_t *reg = ISP_QUE_REG(ha, 0);
	struct device_reg_2xxx __iomem *ioreg = &ha->iobase->isp;
	struct qla_msix_entry *msix;
	struct init_cb_24xx *icb;
	uint16_t rid = 0;
	struct req_que *req = ha->req_q_map[0];
	struct rsp_que *rsp = ha->rsp_q_map[0];

	/* Setup ring parameters in initialization control block. */
	icb = (struct init_cb_24xx *)ha->init_cb;
	icb->request_q_outpointer = cpu_to_le16(0);
	icb->response_q_inpointer = cpu_to_le16(0);
	icb->request_q_length = cpu_to_le16(req->length);
	icb->response_q_length = cpu_to_le16(rsp->length);
	icb->request_q_address[0] = cpu_to_le32(LSD(req->dma));
	icb->request_q_address[1] = cpu_to_le32(MSD(req->dma));
	icb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma));
	icb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma));

	/* Setup ATIO queue dma pointers for target mode */
	icb->atio_q_inpointer = cpu_to_le16(0);
	icb->atio_q_length = cpu_to_le16(ha->tgt.atio_q_length);
	icb->atio_q_address[0] = cpu_to_le32(LSD(ha->tgt.atio_dma));
	icb->atio_q_address[1] = cpu_to_le32(MSD(ha->tgt.atio_dma));

	if (IS_SHADOW_REG_CAPABLE(ha))
		icb->firmware_options_2 |= cpu_to_le32(BIT_30|BIT_29);

	if (ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
		icb->qos = cpu_to_le16(QLA_DEFAULT_QUE_QOS);
		icb->rid = cpu_to_le16(rid);
		if (ha->flags.msix_enabled) {
			msix = &ha->msix_entries[1];
			ql_dbg(ql_dbg_init, vha, 0x00fd,
			    "Registering vector 0x%x for base que.\n",
			    msix->entry);
			icb->msix = cpu_to_le16(msix->entry);
		}
		/* Use alternate PCI bus number */
		if (MSB(rid))
			icb->firmware_options_2 |= cpu_to_le32(BIT_19);
		/* Use alternate PCI devfn */
		if (LSB(rid))
			icb->firmware_options_2 |= cpu_to_le32(BIT_18);

		/* Use Disable MSIX Handshake mode for capable adapters */
		if ((ha->fw_attributes & BIT_6) && (IS_MSIX_NACK_CAPABLE(ha)) &&
		    (ha->flags.msix_enabled)) {
			icb->firmware_options_2 &= cpu_to_le32(~BIT_22);
			ha->flags.disable_msix_handshake = 1;
			ql_dbg(ql_dbg_init, vha, 0x00fe,
			    "MSIX Handshake Disable Mode turned on.\n");
		} else {
			icb->firmware_options_2 |= cpu_to_le32(BIT_22);
		}
		icb->firmware_options_2 |= cpu_to_le32(BIT_23);

		WRT_REG_DWORD(&reg->isp25mq.req_q_in, 0);
		WRT_REG_DWORD(&reg->isp25mq.req_q_out, 0);
		WRT_REG_DWORD(&reg->isp25mq.rsp_q_in, 0);
		WRT_REG_DWORD(&reg->isp25mq.rsp_q_out, 0);
	} else {
		WRT_REG_DWORD(&reg->isp24.req_q_in, 0);
		WRT_REG_DWORD(&reg->isp24.req_q_out, 0);
		WRT_REG_DWORD(&reg->isp24.rsp_q_in, 0);
		WRT_REG_DWORD(&reg->isp24.rsp_q_out, 0);
	}
	qlt_24xx_config_rings(vha);

	/* PCI posting */
	RD_REG_DWORD(&ioreg->hccr);
}

/**
 * qla2x00_init_rings() - Initializes firmware.
 * @ha: HA context
 *
 * Beginning of request ring has initialization control block already built
 * by nvram config routine.
 *
 * Returns 0 on success.
 */
int
qla2x00_init_rings(scsi_qla_host_t *vha)
{
	int	rval;
	unsigned long flags = 0;
	int cnt, que;
	struct qla_hw_data *ha = vha->hw;
	struct req_que *req;
	struct rsp_que *rsp;
	struct mid_init_cb_24xx *mid_init_cb =
	    (struct mid_init_cb_24xx *) ha->init_cb;

	spin_lock_irqsave(&ha->hardware_lock, flags);

	/* Clear outstanding commands array. */
	for (que = 0; que < ha->max_req_queues; que++) {
		req = ha->req_q_map[que];
		if (!req || !test_bit(que, ha->req_qid_map))
			continue;
		req->out_ptr = (void *)(req->ring + req->length);
		*req->out_ptr = 0;
		for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++)
			req->outstanding_cmds[cnt] = NULL;

		req->current_outstanding_cmd = 1;

		/* Initialize firmware. */
		req->ring_ptr  = req->ring;
		req->ring_index    = 0;
		req->cnt      = req->length;
	}

	for (que = 0; que < ha->max_rsp_queues; que++) {
		rsp = ha->rsp_q_map[que];
		if (!rsp || !test_bit(que, ha->rsp_qid_map))
			continue;
		rsp->in_ptr = (void *)(rsp->ring + rsp->length);
		*rsp->in_ptr = 0;
		/* Initialize response queue entries */
		if (IS_QLAFX00(ha))
			qlafx00_init_response_q_entries(rsp);
		else
			qla2x00_init_response_q_entries(rsp);
	}

	ha->tgt.atio_ring_ptr = ha->tgt.atio_ring;
	ha->tgt.atio_ring_index = 0;
	/* Initialize ATIO queue entries */
	qlt_init_atio_q_entries(vha);

	ha->isp_ops->config_rings(vha);

	spin_unlock_irqrestore(&ha->hardware_lock, flags);

	ql_dbg(ql_dbg_init, vha, 0x00d1, "Issue init firmware.\n");

	if (IS_QLAFX00(ha)) {
		rval = qlafx00_init_firmware(vha, ha->init_cb_size);
		goto next_check;
	}

	/* Update any ISP specific firmware options before initialization. */
	ha->isp_ops->update_fw_options(vha);

	if (ha->flags.npiv_supported) {
		if (ha->operating_mode == LOOP && !IS_CNA_CAPABLE(ha))
			ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1;
		mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
	}

	if (IS_FWI2_CAPABLE(ha)) {
		mid_init_cb->options = cpu_to_le16(BIT_1);
		mid_init_cb->init_cb.execution_throttle =
		    cpu_to_le16(ha->cur_fw_xcb_count);
		ha->flags.dport_enabled =
		    (mid_init_cb->init_cb.firmware_options_1 & BIT_7) != 0;
		ql_dbg(ql_dbg_init, vha, 0x0191, "DPORT Support: %s.\n",
		    (ha->flags.dport_enabled) ? "enabled" : "disabled");
		/* FA-WWPN Status */
		ha->flags.fawwpn_enabled =
		    (mid_init_cb->init_cb.firmware_options_1 & BIT_6) != 0;
		ql_dbg(ql_dbg_init, vha, 0x0141, "FA-WWPN Support: %s.\n",
		    (ha->flags.fawwpn_enabled) ? "enabled" : "disabled");
	}

	rval = qla2x00_init_firmware(vha, ha->init_cb_size);
next_check:
	if (rval) {
		ql_log(ql_log_fatal, vha, 0x00d2,
		    "Init Firmware **** FAILED ****.\n");
	} else {
		ql_dbg(ql_dbg_init, vha, 0x00d3,
		    "Init Firmware -- success.\n");
	}

	return (rval);
}

/**
 * qla2x00_fw_ready() - Waits for firmware ready.
 * @ha: HA context
 *
 * Returns 0 on success.
 */
static int
qla2x00_fw_ready(scsi_qla_host_t *vha)
{
	int		rval;
	unsigned long	wtime, mtime, cs84xx_time;
	uint16_t	min_wait;	/* Minimum wait time if loop is down */
	uint16_t	wait_time;	/* Wait time if loop is coming ready */
	uint16_t	state[6];
	struct qla_hw_data *ha = vha->hw;

	if (IS_QLAFX00(vha->hw))
		return qlafx00_fw_ready(vha);

	rval = QLA_SUCCESS;

	/* Time to wait for loop down */
	if (IS_P3P_TYPE(ha))
		min_wait = 30;
	else
		min_wait = 20;

	/*
	 * Firmware should take at most one RATOV to login, plus 5 seconds for
	 * our own processing.
	 */
	if ((wait_time = (ha->retry_count*ha->login_timeout) + 5) < min_wait) {
		wait_time = min_wait;
	}

	/* Min wait time if loop down */
	mtime = jiffies + (min_wait * HZ);

	/* wait time before firmware ready */
	wtime = jiffies + (wait_time * HZ);

	/* Wait for ISP to finish LIP */
	if (!vha->flags.init_done)
		ql_log(ql_log_info, vha, 0x801e,
		    "Waiting for LIP to complete.\n");

	do {
		memset(state, -1, sizeof(state));
		rval = qla2x00_get_firmware_state(vha, state);
		if (rval == QLA_SUCCESS) {
			if (state[0] < FSTATE_LOSS_OF_SYNC) {
				vha->device_flags &= ~DFLG_NO_CABLE;
			}
			if (IS_QLA84XX(ha) && state[0] != FSTATE_READY) {
				ql_dbg(ql_dbg_taskm, vha, 0x801f,
				    "fw_state=%x 84xx=%x.\n", state[0],
				    state[2]);
				if ((state[2] & FSTATE_LOGGED_IN) &&
				     (state[2] & FSTATE_WAITING_FOR_VERIFY)) {
					ql_dbg(ql_dbg_taskm, vha, 0x8028,
					    "Sending verify iocb.\n");

					cs84xx_time = jiffies;
					rval = qla84xx_init_chip(vha);
					if (rval != QLA_SUCCESS) {
						ql_log(ql_log_warn,
						    vha, 0x8007,
						    "Init chip failed.\n");
						break;
					}

					/* Add time taken to initialize. */
					cs84xx_time = jiffies - cs84xx_time;
					wtime += cs84xx_time;
					mtime += cs84xx_time;
					ql_dbg(ql_dbg_taskm, vha, 0x8008,
					    "Increasing wait time by %ld. "
					    "New time %ld.\n", cs84xx_time,
					    wtime);
				}
			} else if (state[0] == FSTATE_READY) {
				ql_dbg(ql_dbg_taskm, vha, 0x8037,
				    "F/W Ready - OK.\n");

				qla2x00_get_retry_cnt(vha, &ha->retry_count,
				    &ha->login_timeout, &ha->r_a_tov);

				rval = QLA_SUCCESS;
				break;
			}

			rval = QLA_FUNCTION_FAILED;

			if (atomic_read(&vha->loop_down_timer) &&
			    state[0] != FSTATE_READY) {
				/* Loop down. Timeout on min_wait for states
				 * other than Wait for Login.
				 */
				if (time_after_eq(jiffies, mtime)) {
					ql_log(ql_log_info, vha, 0x8038,
					    "Cable is unplugged...\n");

					vha->device_flags |= DFLG_NO_CABLE;
					break;
				}
			}
		} else {
			/* Mailbox cmd failed. Timeout on min_wait. */
			if (time_after_eq(jiffies, mtime) ||
				ha->flags.isp82xx_fw_hung)
				break;
		}

		if (time_after_eq(jiffies, wtime))
			break;

		/* Delay for a while */
		msleep(500);
	} while (1);

	ql_dbg(ql_dbg_taskm, vha, 0x803a,
	    "fw_state=%x (%x, %x, %x, %x %x) curr time=%lx.\n", state[0],
	    state[1], state[2], state[3], state[4], state[5], jiffies);

	if (rval && !(vha->device_flags & DFLG_NO_CABLE)) {
		ql_log(ql_log_warn, vha, 0x803b,
		    "Firmware ready **** FAILED ****.\n");
	}

	return (rval);
}

/*
*  qla2x00_configure_hba
*      Setup adapter context.
*
* Input:
*      ha = adapter state pointer.
*
* Returns:
*      0 = success
*
* Context:
*      Kernel context.
*/
static int
qla2x00_configure_hba(scsi_qla_host_t *vha)
{
	int       rval;
	uint16_t      loop_id;
	uint16_t      topo;
	uint16_t      sw_cap;
	uint8_t       al_pa;
	uint8_t       area;
	uint8_t       domain;
	char		connect_type[22];
	struct qla_hw_data *ha = vha->hw;
	unsigned long flags;
	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);

	/* Get host addresses. */
	rval = qla2x00_get_adapter_id(vha,
	    &loop_id, &al_pa, &area, &domain, &topo, &sw_cap);
	if (rval != QLA_SUCCESS) {
		if (LOOP_TRANSITION(vha) || atomic_read(&ha->loop_down_timer) ||
		    IS_CNA_CAPABLE(ha) ||
		    (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
			ql_dbg(ql_dbg_disc, vha, 0x2008,
			    "Loop is in a transition state.\n");
		} else {
			ql_log(ql_log_warn, vha, 0x2009,
			    "Unable to get host loop ID.\n");
			if (IS_FWI2_CAPABLE(ha) && (vha == base_vha) &&
			    (rval == QLA_COMMAND_ERROR && loop_id == 0x1b)) {
				ql_log(ql_log_warn, vha, 0x1151,
				    "Doing link init.\n");
				if (qla24xx_link_initialize(vha) == QLA_SUCCESS)
					return rval;
			}
			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
		}
		return (rval);
	}

	if (topo == 4) {
		ql_log(ql_log_info, vha, 0x200a,
		    "Cannot get topology - retrying.\n");
		return (QLA_FUNCTION_FAILED);
	}

	vha->loop_id = loop_id;

	/* initialize */
	ha->min_external_loopid = SNS_FIRST_LOOP_ID;
	ha->operating_mode = LOOP;
	ha->switch_cap = 0;

	switch (topo) {
	case 0:
		ql_dbg(ql_dbg_disc, vha, 0x200b, "HBA in NL topology.\n");
		ha->current_topology = ISP_CFG_NL;
		strcpy(connect_type, "(Loop)");
		break;

	case 1:
		ql_dbg(ql_dbg_disc, vha, 0x200c, "HBA in FL topology.\n");
		ha->switch_cap = sw_cap;
		ha->current_topology = ISP_CFG_FL;
		strcpy(connect_type, "(FL_Port)");
		break;

	case 2:
		ql_dbg(ql_dbg_disc, vha, 0x200d, "HBA in N P2P topology.\n");
		ha->operating_mode = P2P;
		ha->current_topology = ISP_CFG_N;
		strcpy(connect_type, "(N_Port-to-N_Port)");
		break;

	case 3:
		ql_dbg(ql_dbg_disc, vha, 0x200e, "HBA in F P2P topology.\n");
		ha->switch_cap = sw_cap;
		ha->operating_mode = P2P;
		ha->current_topology = ISP_CFG_F;
		strcpy(connect_type, "(F_Port)");
		break;

	default:
		ql_dbg(ql_dbg_disc, vha, 0x200f,
		    "HBA in unknown topology %x, using NL.\n", topo);
		ha->current_topology = ISP_CFG_NL;
		strcpy(connect_type, "(Loop)");
		break;
	}

	/* Save Host port and loop ID. */
	/* byte order - Big Endian */
	vha->d_id.b.domain = domain;
	vha->d_id.b.area = area;
	vha->d_id.b.al_pa = al_pa;

	spin_lock_irqsave(&ha->vport_slock, flags);
	qlt_update_vp_map(vha, SET_AL_PA);
	spin_unlock_irqrestore(&ha->vport_slock, flags);

	if (!vha->flags.init_done)
		ql_log(ql_log_info, vha, 0x2010,
		    "Topology - %s, Host Loop address 0x%x.\n",
		    connect_type, vha->loop_id);

	return(rval);
}

inline void
qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len,
	char *def)
{
	char *st, *en;
	uint16_t index;
	struct qla_hw_data *ha = vha->hw;
	int use_tbl = !IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) &&
	    !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha);

	if (memcmp(model, BINZERO, len) != 0) {
		strncpy(ha->model_number, model, len);
		st = en = ha->model_number;
		en += len - 1;
		while (en > st) {
			if (*en != 0x20 && *en != 0x00)
				break;
			*en-- = '\0';
		}

		index = (ha->pdev->subsystem_device & 0xff);
		if (use_tbl &&
		    ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
		    index < QLA_MODEL_NAMES)
			strncpy(ha->model_desc,
			    qla2x00_model_name[index * 2 + 1],
			    sizeof(ha->model_desc) - 1);
	} else {
		index = (ha->pdev->subsystem_device & 0xff);
		if (use_tbl &&
		    ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
		    index < QLA_MODEL_NAMES) {
			strcpy(ha->model_number,
			    qla2x00_model_name[index * 2]);
			strncpy(ha->model_desc,
			    qla2x00_model_name[index * 2 + 1],
			    sizeof(ha->model_desc) - 1);
		} else {
			strcpy(ha->model_number, def);
		}
	}
	if (IS_FWI2_CAPABLE(ha))
		qla2xxx_get_vpd_field(vha, "\x82", ha->model_desc,
		    sizeof(ha->model_desc));
}

/* On sparc systems, obtain port and node WWN from firmware
 * properties.
 */
static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *vha, nvram_t *nv)
{
#ifdef CONFIG_SPARC
	struct qla_hw_data *ha = vha->hw;
	struct pci_dev *pdev = ha->pdev;
	struct device_node *dp = pci_device_to_OF_node(pdev);
	const u8 *val;
	int len;

	val = of_get_property(dp, "port-wwn", &len);
	if (val && len >= WWN_SIZE)
		memcpy(nv->port_name, val, WWN_SIZE);

	val = of_get_property(dp, "node-wwn", &len);
	if (val && len >= WWN_SIZE)
		memcpy(nv->node_name, val, WWN_SIZE);
#endif
}

/*
* NVRAM configuration for ISP 2xxx
*
* Input:
*      ha                = adapter block pointer.
*
* Output:
*      initialization control block in response_ring
*      host adapters parameters in host adapter block
*
* Returns:
*      0 = success.
*/
int
qla2x00_nvram_config(scsi_qla_host_t *vha)
{
	int             rval;
	uint8_t         chksum = 0;
	uint16_t        cnt;
	uint8_t         *dptr1, *dptr2;
	struct qla_hw_data *ha = vha->hw;
	init_cb_t       *icb = ha->init_cb;
	nvram_t         *nv = ha->nvram;
	uint8_t         *ptr = ha->nvram;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

	rval = QLA_SUCCESS;

	/* Determine NVRAM starting address. */
	ha->nvram_size = sizeof(nvram_t);
	ha->nvram_base = 0;
	if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha))
		if ((RD_REG_WORD(&reg->ctrl_status) >> 14) == 1)
			ha->nvram_base = 0x80;

	/* Get NVRAM data and calculate checksum. */
	ha->isp_ops->read_nvram(vha, ptr, ha->nvram_base, ha->nvram_size);
	for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++)
		chksum += *ptr++;

	ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x010f,
	    "Contents of NVRAM.\n");
	ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0110,
	    (uint8_t *)nv, ha->nvram_size);

	/* Bad NVRAM data, set defaults parameters. */
	if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' ||
	    nv->id[2] != 'P' || nv->id[3] != ' ' || nv->nvram_version < 1) {
		/* Reset NVRAM data. */
		ql_log(ql_log_warn, vha, 0x0064,
		    "Inconsistent NVRAM "
		    "detected: checksum=0x%x id=%c version=0x%x.\n",
		    chksum, nv->id[0], nv->nvram_version);
		ql_log(ql_log_warn, vha, 0x0065,
		    "Falling back to "
		    "functioning (yet invalid -- WWPN) defaults.\n");

		/*
		 * Set default initialization control block.
		 */
		memset(nv, 0, ha->nvram_size);
		nv->parameter_block_version = ICB_VERSION;

		if (IS_QLA23XX(ha)) {
			nv->firmware_options[0] = BIT_2 | BIT_1;
			nv->firmware_options[1] = BIT_7 | BIT_5;
			nv->add_firmware_options[0] = BIT_5;
			nv->add_firmware_options[1] = BIT_5 | BIT_4;
			nv->frame_payload_size = 2048;
			nv->special_options[1] = BIT_7;
		} else if (IS_QLA2200(ha)) {
			nv->firmware_options[0] = BIT_2 | BIT_1;
			nv->firmware_options[1] = BIT_7 | BIT_5;
			nv->add_firmware_options[0] = BIT_5;
			nv->add_firmware_options[1] = BIT_5 | BIT_4;
			nv->frame_payload_size = 1024;
		} else if (IS_QLA2100(ha)) {
			nv->firmware_options[0] = BIT_3 | BIT_1;
			nv->firmware_options[1] = BIT_5;
			nv->frame_payload_size = 1024;
		}

		nv->max_iocb_allocation = cpu_to_le16(256);
		nv->execution_throttle = cpu_to_le16(16);
		nv->retry_count = 8;
		nv->retry_delay = 1;

		nv->port_name[0] = 33;
		nv->port_name[3] = 224;
		nv->port_name[4] = 139;

		qla2xxx_nvram_wwn_from_ofw(vha, nv);

		nv->login_timeout = 4;

		/*
		 * Set default host adapter parameters
		 */
		nv->host_p[1] = BIT_2;
		nv->reset_delay = 5;
		nv->port_down_retry_count = 8;
		nv->max_luns_per_target = cpu_to_le16(8);
		nv->link_down_timeout = 60;

		rval = 1;
	}

#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
	/*
	 * The SN2 does not provide BIOS emulation which means you can't change
	 * potentially bogus BIOS settings. Force the use of default settings
	 * for link rate and frame size.  Hope that the rest of the settings
	 * are valid.
	 */
	if (ia64_platform_is("sn2")) {
		nv->frame_payload_size = 2048;
		if (IS_QLA23XX(ha))
			nv->special_options[1] = BIT_7;
	}
#endif

	/* Reset Initialization control block */
	memset(icb, 0, ha->init_cb_size);

	/*
	 * Setup driver NVRAM options.
	 */
	nv->firmware_options[0] |= (BIT_6 | BIT_1);
	nv->firmware_options[0] &= ~(BIT_5 | BIT_4);
	nv->firmware_options[1] |= (BIT_5 | BIT_0);
	nv->firmware_options[1] &= ~BIT_4;

	if (IS_QLA23XX(ha)) {
		nv->firmware_options[0] |= BIT_2;
		nv->firmware_options[0] &= ~BIT_3;
		nv->special_options[0] &= ~BIT_6;
		nv->add_firmware_options[1] |= BIT_5 | BIT_4;

		if (IS_QLA2300(ha)) {
			if (ha->fb_rev == FPM_2310) {
				strcpy(ha->model_number, "QLA2310");
			} else {
				strcpy(ha->model_number, "QLA2300");
			}
		} else {
			qla2x00_set_model_info(vha, nv->model_number,
			    sizeof(nv->model_number), "QLA23xx");
		}
	} else if (IS_QLA2200(ha)) {
		nv->firmware_options[0] |= BIT_2;
		/*
		 * 'Point-to-point preferred, else loop' is not a safe
		 * connection mode setting.
		 */
		if ((nv->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) ==
		    (BIT_5 | BIT_4)) {
			/* Force 'loop preferred, else point-to-point'. */
			nv->add_firmware_options[0] &= ~(BIT_6 | BIT_5 | BIT_4);
			nv->add_firmware_options[0] |= BIT_5;
		}
		strcpy(ha->model_number, "QLA22xx");
	} else /*if (IS_QLA2100(ha))*/ {
		strcpy(ha->model_number, "QLA2100");
	}

	/*
	 * Copy over NVRAM RISC parameter block to initialization control block.
	 */
	dptr1 = (uint8_t *)icb;
	dptr2 = (uint8_t *)&nv->parameter_block_version;
	cnt = (uint8_t *)&icb->request_q_outpointer - (uint8_t *)&icb->version;
	while (cnt--)
		*dptr1++ = *dptr2++;

	/* Copy 2nd half. */
	dptr1 = (uint8_t *)icb->add_firmware_options;
	cnt = (uint8_t *)icb->reserved_3 - (uint8_t *)icb->add_firmware_options;
	while (cnt--)
		*dptr1++ = *dptr2++;

	/* Use alternate WWN? */
	if (nv->host_p[1] & BIT_7) {
		memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
		memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
	}

	/* Prepare nodename */
	if ((icb->firmware_options[1] & BIT_6) == 0) {
		/*
		 * Firmware will apply the following mask if the nodename was
		 * not provided.
		 */
		memcpy(icb->node_name, icb->port_name, WWN_SIZE);
		icb->node_name[0] &= 0xF0;
	}

	/*
	 * Set host adapter parameters.
	 */

	/*
	 * BIT_7 in the host-parameters section allows for modification to
	 * internal driver logging.
	 */
	if (nv->host_p[0] & BIT_7)
		ql2xextended_error_logging = QL_DBG_DEFAULT1_MASK;
	ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
	/* Always load RISC code on non ISP2[12]00 chips. */
	if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
		ha->flags.disable_risc_code_load = 0;
	ha->flags.enable_lip_reset = ((nv->host_p[1] & BIT_1) ? 1 : 0);
	ha->flags.enable_lip_full_login = ((nv->host_p[1] & BIT_2) ? 1 : 0);
	ha->flags.enable_target_reset = ((nv->host_p[1] & BIT_3) ? 1 : 0);
	ha->flags.enable_led_scheme = (nv->special_options[1] & BIT_4) ? 1 : 0;
	ha->flags.disable_serdes = 0;

	ha->operating_mode =
	    (icb->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) >> 4;

	memcpy(ha->fw_seriallink_options, nv->seriallink_options,
	    sizeof(ha->fw_seriallink_options));

	/* save HBA serial number */
	ha->serial0 = icb->port_name[5];
	ha->serial1 = icb->port_name[6];
	ha->serial2 = icb->port_name[7];
	memcpy(vha->node_name, icb->node_name, WWN_SIZE);
	memcpy(vha->port_name, icb->port_name, WWN_SIZE);

	icb->execution_throttle = cpu_to_le16(0xFFFF);

	ha->retry_count = nv->retry_count;

	/* Set minimum login_timeout to 4 seconds. */
	if (nv->login_timeout != ql2xlogintimeout)
		nv->login_timeout = ql2xlogintimeout;
	if (nv->login_timeout < 4)
		nv->login_timeout = 4;
	ha->login_timeout = nv->login_timeout;

	/* Set minimum RATOV to 100 tenths of a second. */
	ha->r_a_tov = 100;

	ha->loop_reset_delay = nv->reset_delay;

	/* Link Down Timeout = 0:
	 *
	 * 	When Port Down timer expires we will start returning
	 *	I/O's to OS with "DID_NO_CONNECT".
	 *
	 * Link Down Timeout != 0:
	 *
	 *	 The driver waits for the link to come up after link down
	 *	 before returning I/Os to OS with "DID_NO_CONNECT".
	 */
	if (nv->link_down_timeout == 0) {
		ha->loop_down_abort_time =
		    (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
	} else {
		ha->link_down_timeout =	 nv->link_down_timeout;
		ha->loop_down_abort_time =
		    (LOOP_DOWN_TIME - ha->link_down_timeout);
	}

	/*
	 * Need enough time to try and get the port back.
	 */
	ha->port_down_retry_count = nv->port_down_retry_count;
	if (qlport_down_retry)
		ha->port_down_retry_count = qlport_down_retry;
	/* Set login_retry_count */
	ha->login_retry_count  = nv->retry_count;
	if (ha->port_down_retry_count == nv->port_down_retry_count &&
	    ha->port_down_retry_count > 3)
		ha->login_retry_count = ha->port_down_retry_count;
	else if (ha->port_down_retry_count > (int)ha->login_retry_count)
		ha->login_retry_count = ha->port_down_retry_count;
	if (ql2xloginretrycount)
		ha->login_retry_count = ql2xloginretrycount;

	icb->lun_enables = cpu_to_le16(0);
	icb->command_resource_count = 0;
	icb->immediate_notify_resource_count = 0;
	icb->timeout = cpu_to_le16(0);

	if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
		/* Enable RIO */
		icb->firmware_options[0] &= ~BIT_3;
		icb->add_firmware_options[0] &=
		    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
		icb->add_firmware_options[0] |= BIT_2;
		icb->response_accumulation_timer = 3;
		icb->interrupt_delay_timer = 5;

		vha->flags.process_response_queue = 1;
	} else {
		/* Enable ZIO. */
		if (!vha->flags.init_done) {
			ha->zio_mode = icb->add_firmware_options[0] &
			    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
			ha->zio_timer = icb->interrupt_delay_timer ?
			    icb->interrupt_delay_timer: 2;
		}
		icb->add_firmware_options[0] &=
		    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
		vha->flags.process_response_queue = 0;
		if (ha->zio_mode != QLA_ZIO_DISABLED) {
			ha->zio_mode = QLA_ZIO_MODE_6;

			ql_log(ql_log_info, vha, 0x0068,
			    "ZIO mode %d enabled; timer delay (%d us).\n",
			    ha->zio_mode, ha->zio_timer * 100);

			icb->add_firmware_options[0] |= (uint8_t)ha->zio_mode;
			icb->interrupt_delay_timer = (uint8_t)ha->zio_timer;
			vha->flags.process_response_queue = 1;
		}
	}

	if (rval) {
		ql_log(ql_log_warn, vha, 0x0069,
		    "NVRAM configuration failed.\n");
	}
	return (rval);
}

static void
qla2x00_rport_del(void *data)
{
	fc_port_t *fcport = data;
	struct fc_rport *rport;
	unsigned long flags;

	spin_lock_irqsave(fcport->vha->host->host_lock, flags);
	rport = fcport->drport ? fcport->drport: fcport->rport;
	fcport->drport = NULL;
	spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
	if (rport)
		fc_remote_port_delete(rport);
}

/**
 * qla2x00_alloc_fcport() - Allocate a generic fcport.
 * @ha: HA context
 * @flags: allocation flags
 *
 * Returns a pointer to the allocated fcport, or NULL, if none available.
 */
fc_port_t *
qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)
{
	fc_port_t *fcport;

	fcport = kzalloc(sizeof(fc_port_t), flags);
	if (!fcport)
		return NULL;

	/* Setup fcport template structure. */
	fcport->vha = vha;
	fcport->port_type = FCT_UNKNOWN;
	fcport->loop_id = FC_NO_LOOP_ID;
	qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED);
	fcport->supported_classes = FC_COS_UNSPECIFIED;

	return fcport;
}

/*
 * qla2x00_configure_loop
 *      Updates Fibre Channel Device Database with what is actually on loop.
 *
 * Input:
 *      ha                = adapter block pointer.
 *
 * Returns:
 *      0 = success.
 *      1 = error.
 *      2 = database was full and device was not configured.
 */
static int
qla2x00_configure_loop(scsi_qla_host_t *vha)
{
	int  rval;
	unsigned long flags, save_flags;
	struct qla_hw_data *ha = vha->hw;
	rval = QLA_SUCCESS;

	/* Get Initiator ID */
	if (test_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags)) {
		rval = qla2x00_configure_hba(vha);
		if (rval != QLA_SUCCESS) {
			ql_dbg(ql_dbg_disc, vha, 0x2013,
			    "Unable to configure HBA.\n");
			return (rval);
		}
	}

	save_flags = flags = vha->dpc_flags;
	ql_dbg(ql_dbg_disc, vha, 0x2014,
	    "Configure loop -- dpc flags = 0x%lx.\n", flags);

	/*
	 * If we have both an RSCN and PORT UPDATE pending then handle them
	 * both at the same time.
	 */
	clear_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
	clear_bit(RSCN_UPDATE, &vha->dpc_flags);

	qla2x00_get_data_rate(vha);

	/* Determine what we need to do */
	if (ha->current_topology == ISP_CFG_FL &&
	    (test_bit(LOCAL_LOOP_UPDATE, &flags))) {

		set_bit(RSCN_UPDATE, &flags);

	} else if (ha->current_topology == ISP_CFG_F &&
	    (test_bit(LOCAL_LOOP_UPDATE, &flags))) {

		set_bit(RSCN_UPDATE, &flags);
		clear_bit(LOCAL_LOOP_UPDATE, &flags);

	} else if (ha->current_topology == ISP_CFG_N) {
		clear_bit(RSCN_UPDATE, &flags);

	} else if (!vha->flags.online ||
	    (test_bit(ABORT_ISP_ACTIVE, &flags))) {

		set_bit(RSCN_UPDATE, &flags);
		set_bit(LOCAL_LOOP_UPDATE, &flags);
	}

	if (test_bit(LOCAL_LOOP_UPDATE, &flags)) {
		if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
			ql_dbg(ql_dbg_disc, vha, 0x2015,
			    "Loop resync needed, failing.\n");
			rval = QLA_FUNCTION_FAILED;
		} else
			rval = qla2x00_configure_local_loop(vha);
	}

	if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) {
		if (LOOP_TRANSITION(vha)) {
			ql_dbg(ql_dbg_disc, vha, 0x201e,
			    "Needs RSCN update and loop transition.\n");
			rval = QLA_FUNCTION_FAILED;
		}
		else
			rval = qla2x00_configure_fabric(vha);
	}

	if (rval == QLA_SUCCESS) {
		if (atomic_read(&vha->loop_down_timer) ||
		    test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
			rval = QLA_FUNCTION_FAILED;
		} else {
			atomic_set(&vha->loop_state, LOOP_READY);
			ql_dbg(ql_dbg_disc, vha, 0x2069,
			    "LOOP READY.\n");

			/*
			 * Process any ATIO queue entries that came in
			 * while we weren't online.
			 */
			if (qla_tgt_mode_enabled(vha)) {
				if (IS_QLA27XX(ha) || IS_QLA83XX(ha)) {
					spin_lock_irqsave(&ha->tgt.atio_lock,
					    flags);
					qlt_24xx_process_atio_queue(vha, 0);
					spin_unlock_irqrestore(
					    &ha->tgt.atio_lock, flags);
				} else {
					spin_lock_irqsave(&ha->hardware_lock,
					    flags);
					qlt_24xx_process_atio_queue(vha, 1);
					spin_unlock_irqrestore(
					    &ha->hardware_lock, flags);
				}
			}
		}
	}

	if (rval) {
		ql_dbg(ql_dbg_disc, vha, 0x206a,
		    "%s *** FAILED ***.\n", __func__);
	} else {
		ql_dbg(ql_dbg_disc, vha, 0x206b,
		    "%s: exiting normally.\n", __func__);
	}

	/* Restore state if a resync event occurred during processing */
	if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
		if (test_bit(LOCAL_LOOP_UPDATE, &save_flags))
			set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
		if (test_bit(RSCN_UPDATE, &save_flags)) {
			set_bit(RSCN_UPDATE, &vha->dpc_flags);
		}
	}

	return (rval);
}



/*
 * qla2x00_configure_local_loop
 *	Updates Fibre Channel Device Database with local loop devices.
 *
 * Input:
 *	ha = adapter block pointer.
 *
 * Returns:
 *	0 = success.
 */
static int
qla2x00_configure_local_loop(scsi_qla_host_t *vha)
{
	int		rval, rval2;
	int		found_devs;
	int		found;
	fc_port_t	*fcport, *new_fcport;

	uint16_t	index;
	uint16_t	entries;
	char		*id_iter;
	uint16_t	loop_id;
	uint8_t		domain, area, al_pa;
	struct qla_hw_data *ha = vha->hw;

	found_devs = 0;
	new_fcport = NULL;
	entries = MAX_FIBRE_DEVICES_LOOP;

	/* Get list of logged in devices. */
	memset(ha->gid_list, 0, qla2x00_gid_list_size(ha));
	rval = qla2x00_get_id_list(vha, ha->gid_list, ha->gid_list_dma,
	    &entries);
	if (rval != QLA_SUCCESS)
		goto cleanup_allocation;

	ql_dbg(ql_dbg_disc, vha, 0x2017,
	    "Entries in ID list (%d).\n", entries);
	ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x2075,
	    (uint8_t *)ha->gid_list,
	    entries * sizeof(struct gid_list_info));

	/* Allocate temporary fcport for any new fcports discovered. */
	new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
	if (new_fcport == NULL) {
		ql_log(ql_log_warn, vha, 0x2018,
		    "Memory allocation failed for fcport.\n");
		rval = QLA_MEMORY_ALLOC_FAILED;
		goto cleanup_allocation;
	}
	new_fcport->flags &= ~FCF_FABRIC_DEVICE;

	/*
	 * Mark local devices that were present with FCF_DEVICE_LOST for now.
	 */
	list_for_each_entry(fcport, &vha->vp_fcports, list) {
		if (atomic_read(&fcport->state) == FCS_ONLINE &&
		    fcport->port_type != FCT_BROADCAST &&
		    (fcport->flags & FCF_FABRIC_DEVICE) == 0) {

			ql_dbg(ql_dbg_disc, vha, 0x2019,
			    "Marking port lost loop_id=0x%04x.\n",
			    fcport->loop_id);

			qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
		}
	}

	/* Add devices to port list. */
	id_iter = (char *)ha->gid_list;
	for (index = 0; index < entries; index++) {
		domain = ((struct gid_list_info *)id_iter)->domain;
		area = ((struct gid_list_info *)id_iter)->area;
		al_pa = ((struct gid_list_info *)id_iter)->al_pa;
		if (IS_QLA2100(ha) || IS_QLA2200(ha))
			loop_id = (uint16_t)
			    ((struct gid_list_info *)id_iter)->loop_id_2100;
		else
			loop_id = le16_to_cpu(
			    ((struct gid_list_info *)id_iter)->loop_id);
		id_iter += ha->gid_list_info_size;

		/* Bypass reserved domain fields. */
		if ((domain & 0xf0) == 0xf0)
			continue;

		/* Bypass if not same domain and area of adapter. */
		if (area && domain &&
		    (area != vha->d_id.b.area || domain != vha->d_id.b.domain))
			continue;

		/* Bypass invalid local loop ID. */
		if (loop_id > LAST_LOCAL_LOOP_ID)
			continue;

		memset(new_fcport, 0, sizeof(fc_port_t));

		/* Fill in member data. */
		new_fcport->d_id.b.domain = domain;
		new_fcport->d_id.b.area = area;
		new_fcport->d_id.b.al_pa = al_pa;
		new_fcport->loop_id = loop_id;
		rval2 = qla2x00_get_port_database(vha, new_fcport, 0);
		if (rval2 != QLA_SUCCESS) {
			ql_dbg(ql_dbg_disc, vha, 0x201a,
			    "Failed to retrieve fcport information "
			    "-- get_port_database=%x, loop_id=0x%04x.\n",
			    rval2, new_fcport->loop_id);
			ql_dbg(ql_dbg_disc, vha, 0x201b,
			    "Scheduling resync.\n");
			set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
			continue;
		}

		/* Check for matching device in port list. */
		found = 0;
		fcport = NULL;
		list_for_each_entry(fcport, &vha->vp_fcports, list) {
			if (memcmp(new_fcport->port_name, fcport->port_name,
			    WWN_SIZE))
				continue;

			fcport->flags &= ~FCF_FABRIC_DEVICE;
			fcport->loop_id = new_fcport->loop_id;
			fcport->port_type = new_fcport->port_type;
			fcport->d_id.b24 = new_fcport->d_id.b24;
			memcpy(fcport->node_name, new_fcport->node_name,
			    WWN_SIZE);

			found++;
			break;
		}

		if (!found) {
			/* New device, add to fcports list. */
			list_add_tail(&new_fcport->list, &vha->vp_fcports);

			/* Allocate a new replacement fcport. */
			fcport = new_fcport;
			new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
			if (new_fcport == NULL) {
				ql_log(ql_log_warn, vha, 0x201c,
				    "Failed to allocate memory for fcport.\n");
				rval = QLA_MEMORY_ALLOC_FAILED;
				goto cleanup_allocation;
			}
			new_fcport->flags &= ~FCF_FABRIC_DEVICE;
		}

		/* Base iIDMA settings on HBA port speed. */
		fcport->fp_speed = ha->link_data_rate;

		qla2x00_update_fcport(vha, fcport);

		found_devs++;
	}

cleanup_allocation:
	kfree(new_fcport);

	if (rval != QLA_SUCCESS) {
		ql_dbg(ql_dbg_disc, vha, 0x201d,
		    "Configure local loop error exit: rval=%x.\n", rval);
	}

	return (rval);
}

static void
qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
{
	int rval;
	uint16_t mb[MAILBOX_REGISTER_COUNT];
	struct qla_hw_data *ha = vha->hw;

	if (!IS_IIDMA_CAPABLE(ha))
		return;

	if (atomic_read(&fcport->state) != FCS_ONLINE)
		return;

	if (fcport->fp_speed == PORT_SPEED_UNKNOWN ||
	    fcport->fp_speed > ha->link_data_rate)
		return;

	rval = qla2x00_set_idma_speed(vha, fcport->loop_id, fcport->fp_speed,
	    mb);
	if (rval != QLA_SUCCESS) {
		ql_dbg(ql_dbg_disc, vha, 0x2004,
		    "Unable to adjust iIDMA %8phN -- %04x %x %04x %04x.\n",
		    fcport->port_name, rval, fcport->fp_speed, mb[0], mb[1]);
	} else {
		ql_dbg(ql_dbg_disc, vha, 0x2005,
		    "iIDMA adjusted to %s GB/s on %8phN.\n",
		    qla2x00_get_link_speed_str(ha, fcport->fp_speed),
		    fcport->port_name);
	}
}

static void
qla2x00_reg_remote_port(scsi_qla_host_t *vha, fc_port_t *fcport)
{
	struct fc_rport_identifiers rport_ids;
	struct fc_rport *rport;
	unsigned long flags;

	rport_ids.node_name = wwn_to_u64(fcport->node_name);
	rport_ids.port_name = wwn_to_u64(fcport->port_name);
	rport_ids.port_id = fcport->d_id.b.domain << 16 |
	    fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
	rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
	fcport->rport = rport = fc_remote_port_add(vha->host, 0, &rport_ids);
	if (!rport) {
		ql_log(ql_log_warn, vha, 0x2006,
		    "Unable to allocate fc remote port.\n");
		return;
	}
	/*
	 * Create target mode FC NEXUS in qla_target.c if target mode is
	 * enabled..
	 */

	qlt_fc_port_added(vha, fcport);

	spin_lock_irqsave(fcport->vha->host->host_lock, flags);
	*((fc_port_t **)rport->dd_data) = fcport;
	spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);

	rport->supported_classes = fcport->supported_classes;

	rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
	if (fcport->port_type == FCT_INITIATOR)
		rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
	if (fcport->port_type == FCT_TARGET)
		rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
	fc_remote_port_rolechg(rport, rport_ids.roles);
}

/*
 * qla2x00_update_fcport
 *	Updates device on list.
 *
 * Input:
 *	ha = adapter block pointer.
 *	fcport = port structure pointer.
 *
 * Return:
 *	0  - Success
 *  BIT_0 - error
 *
 * Context:
 *	Kernel context.
 */
void
qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
{
	fcport->vha = vha;

	if (IS_QLAFX00(vha->hw)) {
		qla2x00_set_fcport_state(fcport, FCS_ONLINE);
		goto reg_port;
	}
	fcport->login_retry = 0;
	fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);

	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
	qla2x00_iidma_fcport(vha, fcport);
	qla24xx_update_fcport_fcp_prio(vha, fcport);

reg_port:
	if (qla_ini_mode_enabled(vha))
		qla2x00_reg_remote_port(vha, fcport);
	else {
		/*
		 * Create target mode FC NEXUS in qla_target.c
		 */
		qlt_fc_port_added(vha, fcport);
	}
}

/*
 * qla2x00_configure_fabric
 *      Setup SNS devices with loop ID's.
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      0 = success.
 *      BIT_0 = error
 */
static int
qla2x00_configure_fabric(scsi_qla_host_t *vha)
{
	int	rval;
	fc_port_t	*fcport, *fcptemp;
	uint16_t	next_loopid;
	uint16_t	mb[MAILBOX_REGISTER_COUNT];
	uint16_t	loop_id;
	LIST_HEAD(new_fcports);
	struct qla_hw_data *ha = vha->hw;
	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
	int		discovery_gen;

	/* If FL port exists, then SNS is present */
	if (IS_FWI2_CAPABLE(ha))
		loop_id = NPH_F_PORT;
	else
		loop_id = SNS_FL_PORT;
	rval = qla2x00_get_port_name(vha, loop_id, vha->fabric_node_name, 1);
	if (rval != QLA_SUCCESS) {
		ql_dbg(ql_dbg_disc, vha, 0x201f,
		    "MBX_GET_PORT_NAME failed, No FL Port.\n");

		vha->device_flags &= ~SWITCH_FOUND;
		return (QLA_SUCCESS);
	}
	vha->device_flags |= SWITCH_FOUND;

	do {
		/* FDMI support. */
		if (ql2xfdmienable &&
		    test_and_clear_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags))
			qla2x00_fdmi_register(vha);

		/* Ensure we are logged into the SNS. */
		if (IS_FWI2_CAPABLE(ha))
			loop_id = NPH_SNS;
		else
			loop_id = SIMPLE_NAME_SERVER;
		rval = ha->isp_ops->fabric_login(vha, loop_id, 0xff, 0xff,
		    0xfc, mb, BIT_1|BIT_0);
		if (rval != QLA_SUCCESS) {
			set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
			return rval;
		}
		if (mb[0] != MBS_COMMAND_COMPLETE) {
			ql_dbg(ql_dbg_disc, vha, 0x2042,
			    "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x "
			    "mb[6]=%x mb[7]=%x.\n", loop_id, mb[0], mb[1],
			    mb[2], mb[6], mb[7]);
			return (QLA_SUCCESS);
		}

		if (test_and_clear_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags)) {
			if (qla2x00_rft_id(vha)) {
				/* EMPTY */
				ql_dbg(ql_dbg_disc, vha, 0x2045,
				    "Register FC-4 TYPE failed.\n");
			}
			if (qla2x00_rff_id(vha)) {
				/* EMPTY */
				ql_dbg(ql_dbg_disc, vha, 0x2049,
				    "Register FC-4 Features failed.\n");
			}
			if (qla2x00_rnn_id(vha)) {
				/* EMPTY */
				ql_dbg(ql_dbg_disc, vha, 0x204f,
				    "Register Node Name failed.\n");
			} else if (qla2x00_rsnn_nn(vha)) {
				/* EMPTY */
				ql_dbg(ql_dbg_disc, vha, 0x2053,
				    "Register Symobilic Node Name failed.\n");
			}
		}

#define QLA_FCPORT_SCAN		1
#define QLA_FCPORT_FOUND	2

		list_for_each_entry(fcport, &vha->vp_fcports, list) {
			fcport->scan_state = QLA_FCPORT_SCAN;
		}

		/* Mark the time right before querying FW for connected ports.
		 * This process is long, asynchronous and by the time it's done,
		 * collected information might not be accurate anymore. E.g.
		 * disconnected port might have re-connected and a brand new
		 * session has been created. In this case session's generation
		 * will be newer than discovery_gen. */
		qlt_do_generation_tick(vha, &discovery_gen);

		rval = qla2x00_find_all_fabric_devs(vha, &new_fcports);
		if (rval != QLA_SUCCESS)
			break;

		/*
		 * Logout all previous fabric devices marked lost, except
		 * FCP2 devices.
		 */
		list_for_each_entry(fcport, &vha->vp_fcports, list) {
			if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
				break;

			if ((fcport->flags & FCF_FABRIC_DEVICE) == 0)
				continue;

			if (fcport->scan_state == QLA_FCPORT_SCAN) {
				if (qla_ini_mode_enabled(base_vha) &&
				    atomic_read(&fcport->state) == FCS_ONLINE) {
					qla2x00_mark_device_lost(vha, fcport,
					    ql2xplogiabsentdevice, 0);
					if (fcport->loop_id != FC_NO_LOOP_ID &&
					    (fcport->flags & FCF_FCP2_DEVICE) == 0 &&
					    fcport->port_type != FCT_INITIATOR &&
					    fcport->port_type != FCT_BROADCAST) {
						ha->isp_ops->fabric_logout(vha,
						    fcport->loop_id,
						    fcport->d_id.b.domain,
						    fcport->d_id.b.area,
						    fcport->d_id.b.al_pa);
						qla2x00_clear_loop_id(fcport);
					}
				} else if (!qla_ini_mode_enabled(base_vha)) {
					/*
					 * In target mode, explicitly kill
					 * sessions and log out of devices
					 * that are gone, so that we don't
					 * end up with an initiator using the
					 * wrong ACL (if the fabric recycles
					 * an FC address and we have a stale
					 * session around) and so that we don't
					 * report initiators that are no longer
					 * on the fabric.
					 */
					ql_dbg(ql_dbg_tgt_mgt, vha, 0xf077,
					    "port gone, logging out/killing session: "
					    "%8phC state 0x%x flags 0x%x fc4_type 0x%x "
					    "scan_state %d\n",
					    fcport->port_name,
					    atomic_read(&fcport->state),
					    fcport->flags, fcport->fc4_type,
					    fcport->scan_state);
					qlt_fc_port_deleted(vha, fcport,
					    discovery_gen);
				}
			}
		}

		/* Starting free loop ID. */
		next_loopid = ha->min_external_loopid;

		/*
		 * Scan through our port list and login entries that need to be
		 * logged in.
		 */
		list_for_each_entry(fcport, &vha->vp_fcports, list) {
			if (atomic_read(&vha->loop_down_timer) ||
			    test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
				break;

			if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 ||
			    (fcport->flags & FCF_LOGIN_NEEDED) == 0)
				continue;

			/*
			 * If we're not an initiator, skip looking for devices
			 * and logging in.  There's no reason for us to do it,
			 * and it seems to actively cause problems in target
			 * mode if we race with the initiator logging into us
			 * (we might get the "port ID used" status back from
			 * our login command and log out the initiator, which
			 * seems to cause havoc).
			 */
			if (!qla_ini_mode_enabled(base_vha)) {
				if (fcport->scan_state == QLA_FCPORT_FOUND) {
					ql_dbg(ql_dbg_tgt_mgt, vha, 0xf078,
					    "port %8phC state 0x%x flags 0x%x fc4_type 0x%x "
					    "scan_state %d (initiator mode disabled; skipping "
					    "login)\n", fcport->port_name,
					    atomic_read(&fcport->state),
					    fcport->flags, fcport->fc4_type,
					    fcport->scan_state);
				}
				continue;
			}

			if (fcport->loop_id == FC_NO_LOOP_ID) {
				fcport->loop_id = next_loopid;
				rval = qla2x00_find_new_loop_id(
				    base_vha, fcport);
				if (rval != QLA_SUCCESS) {
					/* Ran out of IDs to use */
					break;
				}
			}
			/* Login and update database */
			qla2x00_fabric_dev_login(vha, fcport, &next_loopid);
		}

		/* Exit if out of loop IDs. */
		if (rval != QLA_SUCCESS) {
			break;
		}

		/*
		 * Login and add the new devices to our port list.
		 */
		list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
			if (atomic_read(&vha->loop_down_timer) ||
			    test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
				break;

			/*
			 * If we're not an initiator, skip looking for devices
			 * and logging in.  There's no reason for us to do it,
			 * and it seems to actively cause problems in target
			 * mode if we race with the initiator logging into us
			 * (we might get the "port ID used" status back from
			 * our login command and log out the initiator, which
			 * seems to cause havoc).
			 */
			if (qla_ini_mode_enabled(base_vha)) {
				/* Find a new loop ID to use. */
				fcport->loop_id = next_loopid;
				rval = qla2x00_find_new_loop_id(base_vha,
				    fcport);
				if (rval != QLA_SUCCESS) {
					/* Ran out of IDs to use */
					break;
				}

				/* Login and update database */
				qla2x00_fabric_dev_login(vha, fcport,
				    &next_loopid);
			} else {
				ql_dbg(ql_dbg_tgt_mgt, vha, 0xf079,
					"new port %8phC state 0x%x flags 0x%x fc4_type "
					"0x%x scan_state %d (initiator mode disabled; "
					"skipping login)\n",
					fcport->port_name,
					atomic_read(&fcport->state),
					fcport->flags, fcport->fc4_type,
					fcport->scan_state);
			}

			list_move_tail(&fcport->list, &vha->vp_fcports);
		}
	} while (0);

	/* Free all new device structures not processed. */
	list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
		list_del(&fcport->list);
		kfree(fcport);
	}

	if (rval) {
		ql_dbg(ql_dbg_disc, vha, 0x2068,
		    "Configure fabric error exit rval=%d.\n", rval);
	}

	return (rval);
}

/*
 * qla2x00_find_all_fabric_devs
 *
 * Input:
 *	ha = adapter block pointer.
 *	dev = database device entry pointer.
 *
 * Returns:
 *	0 = success.
 *
 * Context:
 *	Kernel context.
 */
static int
qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
	struct list_head *new_fcports)
{
	int		rval;
	uint16_t	loop_id;
	fc_port_t	*fcport, *new_fcport, *fcptemp;
	int		found;

	sw_info_t	*swl;
	int		swl_idx;
	int		first_dev, last_dev;
	port_id_t	wrap = {}, nxt_d_id;
	struct qla_hw_data *ha = vha->hw;
	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);

	rval = QLA_SUCCESS;

	/* Try GID_PT to get device list, else GAN. */
	if (!ha->swl)
		ha->swl = kcalloc(ha->max_fibre_devices, sizeof(sw_info_t),
		    GFP_KERNEL);
	swl = ha->swl;
	if (!swl) {
		/*EMPTY*/
		ql_dbg(ql_dbg_disc, vha, 0x2054,
		    "GID_PT allocations failed, fallback on GA_NXT.\n");
	} else {
		memset(swl, 0, ha->max_fibre_devices * sizeof(sw_info_t));
		if (qla2x00_gid_pt(vha, swl) != QLA_SUCCESS) {
			swl = NULL;
		} else if (qla2x00_gpn_id(vha, swl) != QLA_SUCCESS) {
			swl = NULL;
		} else if (qla2x00_gnn_id(vha, swl) != QLA_SUCCESS) {
			swl = NULL;
		} else if (ql2xiidmaenable &&
		    qla2x00_gfpn_id(vha, swl) == QLA_SUCCESS) {
			qla2x00_gpsc(vha, swl);
		}

		/* If other queries succeeded probe for FC-4 type */
		if (swl)
			qla2x00_gff_id(vha, swl);
	}
	swl_idx = 0;

	/* Allocate temporary fcport for any new fcports discovered. */
	new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
	if (new_fcport == NULL) {
		ql_log(ql_log_warn, vha, 0x205e,
		    "Failed to allocate memory for fcport.\n");
		return (QLA_MEMORY_ALLOC_FAILED);
	}
	new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
	/* Set start port ID scan at adapter ID. */
	first_dev = 1;
	last_dev = 0;

	/* Starting free loop ID. */
	loop_id = ha->min_external_loopid;
	for (; loop_id <= ha->max_loop_id; loop_id++) {
		if (qla2x00_is_reserved_id(vha, loop_id))
			continue;

		if (ha->current_topology == ISP_CFG_FL &&
		    (atomic_read(&vha->loop_down_timer) ||
		     LOOP_TRANSITION(vha))) {
			atomic_set(&vha->loop_down_timer, 0);
			set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
			set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
			break;
		}

		if (swl != NULL) {
			if (last_dev) {
				wrap.b24 = new_fcport->d_id.b24;
			} else {
				new_fcport->d_id.b24 = swl[swl_idx].d_id.b24;
				memcpy(new_fcport->node_name,
				    swl[swl_idx].node_name, WWN_SIZE);
				memcpy(new_fcport->port_name,
				    swl[swl_idx].port_name, WWN_SIZE);
				memcpy(new_fcport->fabric_port_name,
				    swl[swl_idx].fabric_port_name, WWN_SIZE);
				new_fcport->fp_speed = swl[swl_idx].fp_speed;
				new_fcport->fc4_type = swl[swl_idx].fc4_type;

				if (swl[swl_idx].d_id.b.rsvd_1 != 0) {
					last_dev = 1;
				}
				swl_idx++;
			}
		} else {
			/* Send GA_NXT to the switch */
			rval = qla2x00_ga_nxt(vha, new_fcport);
			if (rval != QLA_SUCCESS) {
				ql_log(ql_log_warn, vha, 0x2064,
				    "SNS scan failed -- assuming "
				    "zero-entry result.\n");
				list_for_each_entry_safe(fcport, fcptemp,
				    new_fcports, list) {
					list_del(&fcport->list);
					kfree(fcport);
				}
				rval = QLA_SUCCESS;
				break;
			}
		}

		/* If wrap on switch device list, exit. */
		if (first_dev) {
			wrap.b24 = new_fcport->d_id.b24;
			first_dev = 0;
		} else if (new_fcport->d_id.b24 == wrap.b24) {
			ql_dbg(ql_dbg_disc, vha, 0x2065,
			    "Device wrap (%02x%02x%02x).\n",
			    new_fcport->d_id.b.domain,
			    new_fcport->d_id.b.area,
			    new_fcport->d_id.b.al_pa);
			break;
		}

		/* Bypass if same physical adapter. */
		if (new_fcport->d_id.b24 == base_vha->d_id.b24)
			continue;

		/* Bypass virtual ports of the same host. */
		if (qla2x00_is_a_vp_did(vha, new_fcport->d_id.b24))
			continue;

		/* Bypass if same domain and area of adapter. */
		if (((new_fcport->d_id.b24 & 0xffff00) ==
		    (vha->d_id.b24 & 0xffff00)) && ha->current_topology ==
			ISP_CFG_FL)
			    continue;

		/* Bypass reserved domain fields. */
		if ((new_fcport->d_id.b.domain & 0xf0) == 0xf0)
			continue;

		/* Bypass ports whose FCP-4 type is not FCP_SCSI */
		if (ql2xgffidenable &&
		    (new_fcport->fc4_type != FC4_TYPE_FCP_SCSI &&
		    new_fcport->fc4_type != FC4_TYPE_UNKNOWN))
			continue;

		/* Locate matching device in database. */
		found = 0;
		list_for_each_entry(fcport, &vha->vp_fcports, list) {
			if (memcmp(new_fcport->port_name, fcport->port_name,
			    WWN_SIZE))
				continue;

			fcport->scan_state = QLA_FCPORT_FOUND;

			found++;

			/* Update port state. */
			memcpy(fcport->fabric_port_name,
			    new_fcport->fabric_port_name, WWN_SIZE);
			fcport->fp_speed = new_fcport->fp_speed;

			/*
			 * If address the same and state FCS_ONLINE
			 * (or in target mode), nothing changed.
			 */
			if (fcport->d_id.b24 == new_fcport->d_id.b24 &&
			    (atomic_read(&fcport->state) == FCS_ONLINE ||
			     !qla_ini_mode_enabled(base_vha))) {
				break;
			}

			/*
			 * If device was not a fabric device before.
			 */
			if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) {
				fcport->d_id.b24 = new_fcport->d_id.b24;
				qla2x00_clear_loop_id(fcport);
				fcport->flags |= (FCF_FABRIC_DEVICE |
				    FCF_LOGIN_NEEDED);
				break;
			}

			/*
			 * Port ID changed or device was marked to be updated;
			 * Log it out if still logged in and mark it for
			 * relogin later.
			 */
			if (!qla_ini_mode_enabled(base_vha)) {
				ql_dbg(ql_dbg_tgt_mgt, vha, 0xf080,
					 "port changed FC ID, %8phC"
					 " old %x:%x:%x (loop_id 0x%04x)-> new %x:%x:%x\n",
					 fcport->port_name,
					 fcport->d_id.b.domain,
					 fcport->d_id.b.area,
					 fcport->d_id.b.al_pa,
					 fcport->loop_id,
					 new_fcport->d_id.b.domain,
					 new_fcport->d_id.b.area,
					 new_fcport->d_id.b.al_pa);
				fcport->d_id.b24 = new_fcport->d_id.b24;
				break;
			}

			fcport->d_id.b24 = new_fcport->d_id.b24;
			fcport->flags |= FCF_LOGIN_NEEDED;
			if (fcport->loop_id != FC_NO_LOOP_ID &&
			    (fcport->flags & FCF_FCP2_DEVICE) == 0 &&
			    (fcport->flags & FCF_ASYNC_SENT) == 0 &&
			    fcport->port_type != FCT_INITIATOR &&
			    fcport->port_type != FCT_BROADCAST) {
				ha->isp_ops->fabric_logout(vha, fcport->loop_id,
				    fcport->d_id.b.domain, fcport->d_id.b.area,
				    fcport->d_id.b.al_pa);
				qla2x00_clear_loop_id(fcport);
			}

			break;
		}

		if (found)
			continue;
		/* If device was not in our fcports list, then add it. */
		new_fcport->scan_state = QLA_FCPORT_FOUND;
		list_add_tail(&new_fcport->list, new_fcports);

		/* Allocate a new replacement fcport. */
		nxt_d_id.b24 = new_fcport->d_id.b24;
		new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
		if (new_fcport == NULL) {
			ql_log(ql_log_warn, vha, 0x2066,
			    "Memory allocation failed for fcport.\n");
			return (QLA_MEMORY_ALLOC_FAILED);
		}
		new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED);
		new_fcport->d_id.b24 = nxt_d_id.b24;
	}

	kfree(new_fcport);

	return (rval);
}

/*
 * qla2x00_find_new_loop_id
 *	Scan through our port list and find a new usable loop ID.
 *
 * Input:
 *	ha:	adapter state pointer.
 *	dev:	port structure pointer.
 *
 * Returns:
 *	qla2x00 local function return status code.
 *
 * Context:
 *	Kernel context.
 */
int
qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev)
{
	int	rval;
	struct qla_hw_data *ha = vha->hw;
	unsigned long flags = 0;

	rval = QLA_SUCCESS;

	spin_lock_irqsave(&ha->vport_slock, flags);

	dev->loop_id = find_first_zero_bit(ha->loop_id_map,
	    LOOPID_MAP_SIZE);
	if (dev->loop_id >= LOOPID_MAP_SIZE ||
	    qla2x00_is_reserved_id(vha, dev->loop_id)) {
		dev->loop_id = FC_NO_LOOP_ID;
		rval = QLA_FUNCTION_FAILED;
	} else
		set_bit(dev->loop_id, ha->loop_id_map);

	spin_unlock_irqrestore(&ha->vport_slock, flags);

	if (rval == QLA_SUCCESS)
		ql_dbg(ql_dbg_disc, dev->vha, 0x2086,
		    "Assigning new loopid=%x, portid=%x.\n",
		    dev->loop_id, dev->d_id.b24);
	else
		ql_log(ql_log_warn, dev->vha, 0x2087,
		    "No loop_id's available, portid=%x.\n",
		    dev->d_id.b24);

	return (rval);
}

/*
 * qla2x00_fabric_dev_login
 *	Login fabric target device and update FC port database.
 *
 * Input:
 *	ha:		adapter state pointer.
 *	fcport:		port structure list pointer.
 *	next_loopid:	contains value of a new loop ID that can be used
 *			by the next login attempt.
 *
 * Returns:
 *	qla2x00 local function return status code.
 *
 * Context:
 *	Kernel context.
 */
static int
qla2x00_fabric_dev_login(scsi_qla_host_t *vha, fc_port_t *fcport,
    uint16_t *next_loopid)
{
	int	rval;
	uint8_t opts;
	struct qla_hw_data *ha = vha->hw;

	rval = QLA_SUCCESS;

	if (IS_ALOGIO_CAPABLE(ha)) {
		if (fcport->flags & FCF_ASYNC_SENT)
			return rval;
		fcport->flags |= FCF_ASYNC_SENT;
		rval = qla2x00_post_async_login_work(vha, fcport, NULL);
		if (!rval)
			return rval;
	}

	fcport->flags &= ~FCF_ASYNC_SENT;
	rval = qla2x00_fabric_login(vha, fcport, next_loopid);
	if (rval == QLA_SUCCESS) {
		/* Send an ADISC to FCP2 devices.*/
		opts = 0;
		if (fcport->flags & FCF_FCP2_DEVICE)
			opts |= BIT_1;
		rval = qla2x00_get_port_database(vha, fcport, opts);
		if (rval != QLA_SUCCESS) {
			ha->isp_ops->fabric_logout(vha, fcport->loop_id,
			    fcport->d_id.b.domain, fcport->d_id.b.area,
			    fcport->d_id.b.al_pa);
			qla2x00_mark_device_lost(vha, fcport, 1, 0);
		} else {
			qla2x00_update_fcport(vha, fcport);
		}
	} else {
		/* Retry Login. */
		qla2x00_mark_device_lost(vha, fcport, 1, 0);
	}

	return (rval);
}

/*
 * qla2x00_fabric_login
 *	Issue fabric login command.
 *
 * Input:
 *	ha = adapter block pointer.
 *	device = pointer to FC device type structure.
 *
 * Returns:
 *      0 - Login successfully
 *      1 - Login failed
 *      2 - Initiator device
 *      3 - Fatal error
 */
int
qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport,
    uint16_t *next_loopid)
{
	int	rval;
	int	retry;
	uint16_t tmp_loopid;
	uint16_t mb[MAILBOX_REGISTER_COUNT];
	struct qla_hw_data *ha = vha->hw;

	retry = 0;
	tmp_loopid = 0;

	for (;;) {
		ql_dbg(ql_dbg_disc, vha, 0x2000,
		    "Trying Fabric Login w/loop id 0x%04x for port "
		    "%02x%02x%02x.\n",
		    fcport->loop_id, fcport->d_id.b.domain,
		    fcport->d_id.b.area, fcport->d_id.b.al_pa);

		/* Login fcport on switch. */
		rval = ha->isp_ops->fabric_login(vha, fcport->loop_id,
		    fcport->d_id.b.domain, fcport->d_id.b.area,
		    fcport->d_id.b.al_pa, mb, BIT_0);
		if (rval != QLA_SUCCESS) {
			return rval;
		}
		if (mb[0] == MBS_PORT_ID_USED) {
			/*
			 * Device has another loop ID.  The firmware team
			 * recommends the driver perform an implicit login with
			 * the specified ID again. The ID we just used is save
			 * here so we return with an ID that can be tried by
			 * the next login.
			 */
			retry++;
			tmp_loopid = fcport->loop_id;
			fcport->loop_id = mb[1];

			ql_dbg(ql_dbg_disc, vha, 0x2001,
			    "Fabric Login: port in use - next loop "
			    "id=0x%04x, port id= %02x%02x%02x.\n",
			    fcport->loop_id, fcport->d_id.b.domain,
			    fcport->d_id.b.area, fcport->d_id.b.al_pa);

		} else if (mb[0] == MBS_COMMAND_COMPLETE) {
			/*
			 * Login succeeded.
			 */
			if (retry) {
				/* A retry occurred before. */
				*next_loopid = tmp_loopid;
			} else {
				/*
				 * No retry occurred before. Just increment the
				 * ID value for next login.
				 */
				*next_loopid = (fcport->loop_id + 1);
			}

			if (mb[1] & BIT_0) {
				fcport->port_type = FCT_INITIATOR;
			} else {
				fcport->port_type = FCT_TARGET;
				if (mb[1] & BIT_1) {
					fcport->flags |= FCF_FCP2_DEVICE;
				}
			}

			if (mb[10] & BIT_0)
				fcport->supported_classes |= FC_COS_CLASS2;
			if (mb[10] & BIT_1)
				fcport->supported_classes |= FC_COS_CLASS3;

			if (IS_FWI2_CAPABLE(ha)) {
				if (mb[10] & BIT_7)
					fcport->flags |=
					    FCF_CONF_COMP_SUPPORTED;
			}

			rval = QLA_SUCCESS;
			break;
		} else if (mb[0] == MBS_LOOP_ID_USED) {
			/*
			 * Loop ID already used, try next loop ID.
			 */
			fcport->loop_id++;
			rval = qla2x00_find_new_loop_id(vha, fcport);
			if (rval != QLA_SUCCESS) {
				/* Ran out of loop IDs to use */
				break;
			}
		} else if (mb[0] == MBS_COMMAND_ERROR) {
			/*
			 * Firmware possibly timed out during login. If NO
			 * retries are left to do then the device is declared
			 * dead.
			 */
			*next_loopid = fcport->loop_id;
			ha->isp_ops->fabric_logout(vha, fcport->loop_id,
			    fcport->d_id.b.domain, fcport->d_id.b.area,
			    fcport->d_id.b.al_pa);
			qla2x00_mark_device_lost(vha, fcport, 1, 0);

			rval = 1;
			break;
		} else {
			/*
			 * unrecoverable / not handled error
			 */
			ql_dbg(ql_dbg_disc, vha, 0x2002,
			    "Failed=%x port_id=%02x%02x%02x loop_id=%x "
			    "jiffies=%lx.\n", mb[0], fcport->d_id.b.domain,
			    fcport->d_id.b.area, fcport->d_id.b.al_pa,
			    fcport->loop_id, jiffies);

			*next_loopid = fcport->loop_id;
			ha->isp_ops->fabric_logout(vha, fcport->loop_id,
			    fcport->d_id.b.domain, fcport->d_id.b.area,
			    fcport->d_id.b.al_pa);
			qla2x00_clear_loop_id(fcport);
			fcport->login_retry = 0;

			rval = 3;
			break;
		}
	}

	return (rval);
}

/*
 * qla2x00_local_device_login
 *	Issue local device login command.
 *
 * Input:
 *	ha = adapter block pointer.
 *	loop_id = loop id of device to login to.
 *
 * Returns (Where's the #define!!!!):
 *      0 - Login successfully
 *      1 - Login failed
 *      3 - Fatal error
 */
int
qla2x00_local_device_login(scsi_qla_host_t *vha, fc_port_t *fcport)
{
	int		rval;
	uint16_t	mb[MAILBOX_REGISTER_COUNT];

	memset(mb, 0, sizeof(mb));
	rval = qla2x00_login_local_device(vha, fcport, mb, BIT_0);
	if (rval == QLA_SUCCESS) {
		/* Interrogate mailbox registers for any errors */
		if (mb[0] == MBS_COMMAND_ERROR)
			rval = 1;
		else if (mb[0] == MBS_COMMAND_PARAMETER_ERROR)
			/* device not in PCB table */
			rval = 3;
	}

	return (rval);
}

/*
 *  qla2x00_loop_resync
 *      Resync with fibre channel devices.
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      0 = success
 */
int
qla2x00_loop_resync(scsi_qla_host_t *vha)
{
	int rval = QLA_SUCCESS;
	uint32_t wait_time;
	struct req_que *req;
	struct rsp_que *rsp;

	req = vha->req;
	rsp = req->rsp;

	clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
	if (vha->flags.online) {
		if (!(rval = qla2x00_fw_ready(vha))) {
			/* Wait at most MAX_TARGET RSCNs for a stable link. */
			wait_time = 256;
			do {
				if (!IS_QLAFX00(vha->hw)) {
					/*
					 * Issue a marker after FW becomes
					 * ready.
					 */
					qla2x00_marker(vha, req, rsp, 0, 0,
						MK_SYNC_ALL);
					vha->marker_needed = 0;
				}

				/* Remap devices on Loop. */
				clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);

				if (IS_QLAFX00(vha->hw))
					qlafx00_configure_devices(vha);
				else
					qla2x00_configure_loop(vha);

				wait_time--;
			} while (!atomic_read(&vha->loop_down_timer) &&
				!(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
				&& wait_time && (test_bit(LOOP_RESYNC_NEEDED,
				&vha->dpc_flags)));
		}
	}

	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
		return (QLA_FUNCTION_FAILED);

	if (rval)
		ql_dbg(ql_dbg_disc, vha, 0x206c,
		    "%s *** FAILED ***.\n", __func__);

	return (rval);
}

/*
* qla2x00_perform_loop_resync
* Description: This function will set the appropriate flags and call
*              qla2x00_loop_resync. If successful loop will be resynced
* Arguments : scsi_qla_host_t pointer
* returm    : Success or Failure
*/

int qla2x00_perform_loop_resync(scsi_qla_host_t *ha)
{
	int32_t rval = 0;

	if (!test_and_set_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) {
		/*Configure the flags so that resync happens properly*/
		atomic_set(&ha->loop_down_timer, 0);
		if (!(ha->device_flags & DFLG_NO_CABLE)) {
			atomic_set(&ha->loop_state, LOOP_UP);
			set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
			set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
			set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);

			rval = qla2x00_loop_resync(ha);
		} else
			atomic_set(&ha->loop_state, LOOP_DEAD);

		clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags);
	}

	return rval;
}

void
qla2x00_update_fcports(scsi_qla_host_t *base_vha)
{
	fc_port_t *fcport;
	struct scsi_qla_host *vha;
	struct qla_hw_data *ha = base_vha->hw;
	unsigned long flags;

	spin_lock_irqsave(&ha->vport_slock, flags);
	/* Go with deferred removal of rport references. */
	list_for_each_entry(vha, &base_vha->hw->vp_list, list) {
		atomic_inc(&vha->vref_count);
		list_for_each_entry(fcport, &vha->vp_fcports, list) {
			if (fcport->drport &&
			    atomic_read(&fcport->state) != FCS_UNCONFIGURED) {
				spin_unlock_irqrestore(&ha->vport_slock, flags);
				qla2x00_rport_del(fcport);

				/*
				 * Release the target mode FC NEXUS in
				 * qla_target.c, if target mod is enabled.
				 */
				qlt_fc_port_deleted(vha, fcport,
				    base_vha->total_fcport_update_gen);

				spin_lock_irqsave(&ha->vport_slock, flags);
			}
		}
		atomic_dec(&vha->vref_count);
	}
	spin_unlock_irqrestore(&ha->vport_slock, flags);
}

/* Assumes idc_lock always held on entry */
void
qla83xx_reset_ownership(scsi_qla_host_t *vha)
{
	struct qla_hw_data *ha = vha->hw;
	uint32_t drv_presence, drv_presence_mask;
	uint32_t dev_part_info1, dev_part_info2, class_type;
	uint32_t class_type_mask = 0x3;
	uint16_t fcoe_other_function = 0xffff, i;

	if (IS_QLA8044(ha)) {
		drv_presence = qla8044_rd_direct(vha,
		    QLA8044_CRB_DRV_ACTIVE_INDEX);
		dev_part_info1 = qla8044_rd_direct(vha,
		    QLA8044_CRB_DEV_PART_INFO_INDEX);
		dev_part_info2 = qla8044_rd_direct(vha,
		    QLA8044_CRB_DEV_PART_INFO2);
	} else {
		qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence);
		qla83xx_rd_reg(vha, QLA83XX_DEV_PARTINFO1, &dev_part_info1);
		qla83xx_rd_reg(vha, QLA83XX_DEV_PARTINFO2, &dev_part_info2);
	}
	for (i = 0; i < 8; i++) {
		class_type = ((dev_part_info1 >> (i * 4)) & class_type_mask);
		if ((class_type == QLA83XX_CLASS_TYPE_FCOE) &&
		    (i != ha->portnum)) {
			fcoe_other_function = i;
			break;
		}
	}
	if (fcoe_other_function == 0xffff) {
		for (i = 0; i < 8; i++) {
			class_type = ((dev_part_info2 >> (i * 4)) &
			    class_type_mask);
			if ((class_type == QLA83XX_CLASS_TYPE_FCOE) &&
			    ((i + 8) != ha->portnum)) {
				fcoe_other_function = i + 8;
				break;
			}
		}
	}
	/*
	 * Prepare drv-presence mask based on fcoe functions present.
	 * However consider only valid physical fcoe function numbers (0-15).
	 */
	drv_presence_mask = ~((1 << (ha->portnum)) |
			((fcoe_other_function == 0xffff) ?
			 0 : (1 << (fcoe_other_function))));

	/* We are the reset owner iff:
	 *    - No other protocol drivers present.
	 *    - This is the lowest among fcoe functions. */
	if (!(drv_presence & drv_presence_mask) &&
			(ha->portnum < fcoe_other_function)) {
		ql_dbg(ql_dbg_p3p, vha, 0xb07f,
		    "This host is Reset owner.\n");
		ha->flags.nic_core_reset_owner = 1;
	}
}

static int
__qla83xx_set_drv_ack(scsi_qla_host_t *vha)
{
	int rval = QLA_SUCCESS;
	struct qla_hw_data *ha = vha->hw;
	uint32_t drv_ack;

	rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack);
	if (rval == QLA_SUCCESS) {
		drv_ack |= (1 << ha->portnum);
		rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRIVER_ACK, drv_ack);
	}

	return rval;
}

static int
__qla83xx_clear_drv_ack(scsi_qla_host_t *vha)
{
	int rval = QLA_SUCCESS;
	struct qla_hw_data *ha = vha->hw;
	uint32_t drv_ack;

	rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack);
	if (rval == QLA_SUCCESS) {
		drv_ack &= ~(1 << ha->portnum);
		rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRIVER_ACK, drv_ack);
	}

	return rval;
}

static const char *
qla83xx_dev_state_to_string(uint32_t dev_state)
{
	switch (dev_state) {
	case QLA8XXX_DEV_COLD:
		return "COLD/RE-INIT";
	case QLA8XXX_DEV_INITIALIZING:
		return "INITIALIZING";
	case QLA8XXX_DEV_READY:
		return "READY";
	case QLA8XXX_DEV_NEED_RESET:
		return "NEED RESET";
	case QLA8XXX_DEV_NEED_QUIESCENT:
		return "NEED QUIESCENT";
	case QLA8XXX_DEV_FAILED:
		return "FAILED";
	case QLA8XXX_DEV_QUIESCENT:
		return "QUIESCENT";
	default:
		return "Unknown";
	}
}

/* Assumes idc-lock always held on entry */
void
qla83xx_idc_audit(scsi_qla_host_t *vha, int audit_type)
{
	struct qla_hw_data *ha = vha->hw;
	uint32_t idc_audit_reg = 0, duration_secs = 0;

	switch (audit_type) {
	case IDC_AUDIT_TIMESTAMP:
		ha->idc_audit_ts = (jiffies_to_msecs(jiffies) / 1000);
		idc_audit_reg = (ha->portnum) |
		    (IDC_AUDIT_TIMESTAMP << 7) | (ha->idc_audit_ts << 8);
		qla83xx_wr_reg(vha, QLA83XX_IDC_AUDIT, idc_audit_reg);
		break;

	case IDC_AUDIT_COMPLETION:
		duration_secs = ((jiffies_to_msecs(jiffies) -
		    jiffies_to_msecs(ha->idc_audit_ts)) / 1000);
		idc_audit_reg = (ha->portnum) |
		    (IDC_AUDIT_COMPLETION << 7) | (duration_secs << 8);
		qla83xx_wr_reg(vha, QLA83XX_IDC_AUDIT, idc_audit_reg);
		break;

	default:
		ql_log(ql_log_warn, vha, 0xb078,
		    "Invalid audit type specified.\n");
		break;
	}
}

/* Assumes idc_lock always held on entry */
static int
qla83xx_initiating_reset(scsi_qla_host_t *vha)
{
	struct qla_hw_data *ha = vha->hw;
	uint32_t  idc_control, dev_state;

	__qla83xx_get_idc_control(vha, &idc_control);
	if ((idc_control & QLA83XX_IDC_RESET_DISABLED)) {
		ql_log(ql_log_info, vha, 0xb080,
		    "NIC Core reset has been disabled. idc-control=0x%x\n",
		    idc_control);
		return QLA_FUNCTION_FAILED;
	}

	/* Set NEED-RESET iff in READY state and we are the reset-owner */
	qla83xx_rd_reg(vha, QLA83XX_IDC_DEV_STATE, &dev_state);
	if (ha->flags.nic_core_reset_owner && dev_state == QLA8XXX_DEV_READY) {
		qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE,
		    QLA8XXX_DEV_NEED_RESET);
		ql_log(ql_log_info, vha, 0xb056, "HW State: NEED RESET.\n");
		qla83xx_idc_audit(vha, IDC_AUDIT_TIMESTAMP);
	} else {
		const char *state = qla83xx_dev_state_to_string(dev_state);
		ql_log(ql_log_info, vha, 0xb057, "HW State: %s.\n", state);

		/* SV: XXX: Is timeout required here? */
		/* Wait for IDC state change READY -> NEED_RESET */
		while (dev_state == QLA8XXX_DEV_READY) {
			qla83xx_idc_unlock(vha, 0);
			msleep(200);
			qla83xx_idc_lock(vha, 0);
			qla83xx_rd_reg(vha, QLA83XX_IDC_DEV_STATE, &dev_state);
		}
	}

	/* Send IDC ack by writing to drv-ack register */
	__qla83xx_set_drv_ack(vha);

	return QLA_SUCCESS;
}

int
__qla83xx_set_idc_control(scsi_qla_host_t *vha, uint32_t idc_control)
{
	return qla83xx_wr_reg(vha, QLA83XX_IDC_CONTROL, idc_control);
}

int
__qla83xx_get_idc_control(scsi_qla_host_t *vha, uint32_t *idc_control)
{
	return qla83xx_rd_reg(vha, QLA83XX_IDC_CONTROL, idc_control);
}

static int
qla83xx_check_driver_presence(scsi_qla_host_t *vha)
{
	uint32_t drv_presence = 0;
	struct qla_hw_data *ha = vha->hw;

	qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence);
	if (drv_presence & (1 << ha->portnum))
		return QLA_SUCCESS;
	else
		return QLA_TEST_FAILED;
}

int
qla83xx_nic_core_reset(scsi_qla_host_t *vha)
{
	int rval = QLA_SUCCESS;
	struct qla_hw_data *ha = vha->hw;

	ql_dbg(ql_dbg_p3p, vha, 0xb058,
	    "Entered  %s().\n", __func__);

	if (vha->device_flags & DFLG_DEV_FAILED) {
		ql_log(ql_log_warn, vha, 0xb059,
		    "Device in unrecoverable FAILED state.\n");
		return QLA_FUNCTION_FAILED;
	}

	qla83xx_idc_lock(vha, 0);

	if (qla83xx_check_driver_presence(vha) != QLA_SUCCESS) {
		ql_log(ql_log_warn, vha, 0xb05a,
		    "Function=0x%x has been removed from IDC participation.\n",
		    ha->portnum);
		rval = QLA_FUNCTION_FAILED;
		goto exit;
	}

	qla83xx_reset_ownership(vha);

	rval = qla83xx_initiating_reset(vha);

	/*
	 * Perform reset if we are the reset-owner,
	 * else wait till IDC state changes to READY/FAILED.
	 */
	if (rval == QLA_SUCCESS) {
		rval = qla83xx_idc_state_handler(vha);

		if (rval == QLA_SUCCESS)
			ha->flags.nic_core_hung = 0;
		__qla83xx_clear_drv_ack(vha);
	}

exit:
	qla83xx_idc_unlock(vha, 0);

	ql_dbg(ql_dbg_p3p, vha, 0xb05b, "Exiting %s.\n", __func__);

	return rval;
}

int
qla2xxx_mctp_dump(scsi_qla_host_t *vha)
{
	struct qla_hw_data *ha = vha->hw;
	int rval = QLA_FUNCTION_FAILED;

	if (!IS_MCTP_CAPABLE(ha)) {
		/* This message can be removed from the final version */
		ql_log(ql_log_info, vha, 0x506d,
		    "This board is not MCTP capable\n");
		return rval;
	}

	if (!ha->mctp_dump) {
		ha->mctp_dump = dma_alloc_coherent(&ha->pdev->dev,
		    MCTP_DUMP_SIZE, &ha->mctp_dump_dma, GFP_KERNEL);

		if (!ha->mctp_dump) {
			ql_log(ql_log_warn, vha, 0x506e,
			    "Failed to allocate memory for mctp dump\n");
			return rval;
		}
	}

#define MCTP_DUMP_STR_ADDR	0x00000000
	rval = qla2x00_dump_mctp_data(vha, ha->mctp_dump_dma,
	    MCTP_DUMP_STR_ADDR, MCTP_DUMP_SIZE/4);
	if (rval != QLA_SUCCESS) {
		ql_log(ql_log_warn, vha, 0x506f,
		    "Failed to capture mctp dump\n");
	} else {
		ql_log(ql_log_info, vha, 0x5070,
		    "Mctp dump capture for host (%ld/%p).\n",
		    vha->host_no, ha->mctp_dump);
		ha->mctp_dumped = 1;
	}

	if (!ha->flags.nic_core_reset_hdlr_active && !ha->portnum) {
		ha->flags.nic_core_reset_hdlr_active = 1;
		rval = qla83xx_restart_nic_firmware(vha);
		if (rval)
			/* NIC Core reset failed. */
			ql_log(ql_log_warn, vha, 0x5071,
			    "Failed to restart nic firmware\n");
		else
			ql_dbg(ql_dbg_p3p, vha, 0xb084,
			    "Restarted NIC firmware successfully.\n");
		ha->flags.nic_core_reset_hdlr_active = 0;
	}

	return rval;

}

/*
* qla2x00_quiesce_io
* Description: This function will block the new I/Os
*              Its not aborting any I/Os as context
*              is not destroyed during quiescence
* Arguments: scsi_qla_host_t
* return   : void
*/
void
qla2x00_quiesce_io(scsi_qla_host_t *vha)
{
	struct qla_hw_data *ha = vha->hw;
	struct scsi_qla_host *vp;

	ql_dbg(ql_dbg_dpc, vha, 0x401d,
	    "Quiescing I/O - ha=%p.\n", ha);

	atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
	if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
		atomic_set(&vha->loop_state, LOOP_DOWN);
		qla2x00_mark_all_devices_lost(vha, 0);
		list_for_each_entry(vp, &ha->vp_list, list)
			qla2x00_mark_all_devices_lost(vp, 0);
	} else {
		if (!atomic_read(&vha->loop_down_timer))
			atomic_set(&vha->loop_down_timer,
					LOOP_DOWN_TIME);
	}
	/* Wait for pending cmds to complete */
	qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST);
}

void
qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
{
	struct qla_hw_data *ha = vha->hw;
	struct scsi_qla_host *vp;
	unsigned long flags;
	fc_port_t *fcport;

	/* For ISP82XX, driver waits for completion of the commands.
	 * online flag should be set.
	 */
	if (!(IS_P3P_TYPE(ha)))
		vha->flags.online = 0;
	ha->flags.chip_reset_done = 0;
	clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
	vha->qla_stats.total_isp_aborts++;

	ql_log(ql_log_info, vha, 0x00af,
	    "Performing ISP error recovery - ha=%p.\n", ha);

	/* For ISP82XX, reset_chip is just disabling interrupts.
	 * Driver waits for the completion of the commands.
	 * the interrupts need to be enabled.
	 */
	if (!(IS_P3P_TYPE(ha)))
		ha->isp_ops->reset_chip(vha);

	atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
	if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
		atomic_set(&vha->loop_state, LOOP_DOWN);
		qla2x00_mark_all_devices_lost(vha, 0);

		spin_lock_irqsave(&ha->vport_slock, flags);
		list_for_each_entry(vp, &ha->vp_list, list) {
			atomic_inc(&vp->vref_count);
			spin_unlock_irqrestore(&ha->vport_slock, flags);

			qla2x00_mark_all_devices_lost(vp, 0);

			spin_lock_irqsave(&ha->vport_slock, flags);
			atomic_dec(&vp->vref_count);
		}
		spin_unlock_irqrestore(&ha->vport_slock, flags);
	} else {
		if (!atomic_read(&vha->loop_down_timer))
			atomic_set(&vha->loop_down_timer,
			    LOOP_DOWN_TIME);
	}

	/* Clear all async request states across all VPs. */
	list_for_each_entry(fcport, &vha->vp_fcports, list)
		fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);
	spin_lock_irqsave(&ha->vport_slock, flags);
	list_for_each_entry(vp, &ha->vp_list, list) {
		atomic_inc(&vp->vref_count);
		spin_unlock_irqrestore(&ha->vport_slock, flags);

		list_for_each_entry(fcport, &vp->vp_fcports, list)
			fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);

		spin_lock_irqsave(&ha->vport_slock, flags);
		atomic_dec(&vp->vref_count);
	}
	spin_unlock_irqrestore(&ha->vport_slock, flags);

	if (!ha->flags.eeh_busy) {
		/* Make sure for ISP 82XX IO DMA is complete */
		if (IS_P3P_TYPE(ha)) {
			qla82xx_chip_reset_cleanup(vha);
			ql_log(ql_log_info, vha, 0x00b4,
			    "Done chip reset cleanup.\n");

			/* Done waiting for pending commands.
			 * Reset the online flag.
			 */
			vha->flags.online = 0;
		}

		/* Requeue all commands in outstanding command list. */
		qla2x00_abort_all_cmds(vha, DID_RESET << 16);
	}

	ha->chip_reset++;
	/* memory barrier */
	wmb();
}

/*
*  qla2x00_abort_isp
*      Resets ISP and aborts all outstanding commands.
*
* Input:
*      ha           = adapter block pointer.
*
* Returns:
*      0 = success
*/
int
qla2x00_abort_isp(scsi_qla_host_t *vha)
{
	int rval;
	uint8_t        status = 0;
	struct qla_hw_data *ha = vha->hw;
	struct scsi_qla_host *vp;
	struct req_que *req = ha->req_q_map[0];
	unsigned long flags;

	if (vha->flags.online) {
		qla2x00_abort_isp_cleanup(vha);

		if (IS_QLA8031(ha)) {
			ql_dbg(ql_dbg_p3p, vha, 0xb05c,
			    "Clearing fcoe driver presence.\n");
			if (qla83xx_clear_drv_presence(vha) != QLA_SUCCESS)
				ql_dbg(ql_dbg_p3p, vha, 0xb073,
				    "Error while clearing DRV-Presence.\n");
		}

		if (unlikely(pci_channel_offline(ha->pdev) &&
		    ha->flags.pci_channel_io_perm_failure)) {
			clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
			status = 0;
			return status;
		}

		ha->isp_ops->get_flash_version(vha, req->ring);

		ha->isp_ops->nvram_config(vha);

		if (!qla2x00_restart_isp(vha)) {
			clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);

			if (!atomic_read(&vha->loop_down_timer)) {
				/*
				 * Issue marker command only when we are going
				 * to start the I/O .
				 */
				vha->marker_needed = 1;
			}

			vha->flags.online = 1;

			ha->isp_ops->enable_intrs(ha);

			ha->isp_abort_cnt = 0;
			clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);

			if (IS_QLA81XX(ha) || IS_QLA8031(ha))
				qla2x00_get_fw_version(vha);
			if (ha->fce) {
				ha->flags.fce_enabled = 1;
				memset(ha->fce, 0,
				    fce_calc_size(ha->fce_bufs));
				rval = qla2x00_enable_fce_trace(vha,
				    ha->fce_dma, ha->fce_bufs, ha->fce_mb,
				    &ha->fce_bufs);
				if (rval) {
					ql_log(ql_log_warn, vha, 0x8033,
					    "Unable to reinitialize FCE "
					    "(%d).\n", rval);
					ha->flags.fce_enabled = 0;
				}
			}

			if (ha->eft) {
				memset(ha->eft, 0, EFT_SIZE);
				rval = qla2x00_enable_eft_trace(vha,
				    ha->eft_dma, EFT_NUM_BUFFERS);
				if (rval) {
					ql_log(ql_log_warn, vha, 0x8034,
					    "Unable to reinitialize EFT "
					    "(%d).\n", rval);
				}
			}
		} else {	/* failed the ISP abort */
			vha->flags.online = 1;
			if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
				if (ha->isp_abort_cnt == 0) {
					ql_log(ql_log_fatal, vha, 0x8035,
					    "ISP error recover failed - "
					    "board disabled.\n");
					/*
					 * The next call disables the board
					 * completely.
					 */
					ha->isp_ops->reset_adapter(vha);
					vha->flags.online = 0;
					clear_bit(ISP_ABORT_RETRY,
					    &vha->dpc_flags);
					status = 0;
				} else { /* schedule another ISP abort */
					ha->isp_abort_cnt--;
					ql_dbg(ql_dbg_taskm, vha, 0x8020,
					    "ISP abort - retry remaining %d.\n",
					    ha->isp_abort_cnt);
					status = 1;
				}
			} else {
				ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT;
				ql_dbg(ql_dbg_taskm, vha, 0x8021,
				    "ISP error recovery - retrying (%d) "
				    "more times.\n", ha->isp_abort_cnt);
				set_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
				status = 1;
			}
		}

	}

	if (!status) {
		ql_dbg(ql_dbg_taskm, vha, 0x8022, "%s succeeded.\n", __func__);

		spin_lock_irqsave(&ha->vport_slock, flags);
		list_for_each_entry(vp, &ha->vp_list, list) {
			if (vp->vp_idx) {
				atomic_inc(&vp->vref_count);
				spin_unlock_irqrestore(&ha->vport_slock, flags);

				qla2x00_vp_abort_isp(vp);

				spin_lock_irqsave(&ha->vport_slock, flags);
				atomic_dec(&vp->vref_count);
			}
		}
		spin_unlock_irqrestore(&ha->vport_slock, flags);

		if (IS_QLA8031(ha)) {
			ql_dbg(ql_dbg_p3p, vha, 0xb05d,
			    "Setting back fcoe driver presence.\n");
			if (qla83xx_set_drv_presence(vha) != QLA_SUCCESS)
				ql_dbg(ql_dbg_p3p, vha, 0xb074,
				    "Error while setting DRV-Presence.\n");
		}
	} else {
		ql_log(ql_log_warn, vha, 0x8023, "%s **** FAILED ****.\n",
		       __func__);
	}

	return(status);
}

/*
*  qla2x00_restart_isp
*      restarts the ISP after a reset
*
* Input:
*      ha = adapter block pointer.
*
* Returns:
*      0 = success
*/
static int
qla2x00_restart_isp(scsi_qla_host_t *vha)
{
	int status = 0;
	struct qla_hw_data *ha = vha->hw;
	struct req_que *req = ha->req_q_map[0];
	struct rsp_que *rsp = ha->rsp_q_map[0];

	/* If firmware needs to be loaded */
	if (qla2x00_isp_firmware(vha)) {
		vha->flags.online = 0;
		status = ha->isp_ops->chip_diag(vha);
		if (!status)
			status = qla2x00_setup_chip(vha);
	}

	if (!status && !(status = qla2x00_init_rings(vha))) {
		clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
		ha->flags.chip_reset_done = 1;

		/* Initialize the queues in use */
		qla25xx_init_queues(ha);

		status = qla2x00_fw_ready(vha);
		if (!status) {
			/* Issue a marker after FW becomes ready. */
			qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);

			set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
		}

		/* if no cable then assume it's good */
		if ((vha->device_flags & DFLG_NO_CABLE))
			status = 0;
	}
	return (status);
}

static int
qla25xx_init_queues(struct qla_hw_data *ha)
{
	struct rsp_que *rsp = NULL;
	struct req_que *req = NULL;
	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
	int ret = -1;
	int i;

	for (i = 1; i < ha->max_rsp_queues; i++) {
		rsp = ha->rsp_q_map[i];
		if (rsp && test_bit(i, ha->rsp_qid_map)) {
			rsp->options &= ~BIT_0;
			ret = qla25xx_init_rsp_que(base_vha, rsp);
			if (ret != QLA_SUCCESS)
				ql_dbg(ql_dbg_init, base_vha, 0x00ff,
				    "%s Rsp que: %d init failed.\n",
				    __func__, rsp->id);
			else
				ql_dbg(ql_dbg_init, base_vha, 0x0100,
				    "%s Rsp que: %d inited.\n",
				    __func__, rsp->id);
		}
	}
	for (i = 1; i < ha->max_req_queues; i++) {
		req = ha->req_q_map[i];
		if (req && test_bit(i, ha->req_qid_map)) {
			/* Clear outstanding commands array. */
			req->options &= ~BIT_0;
			ret = qla25xx_init_req_que(base_vha, req);
			if (ret != QLA_SUCCESS)
				ql_dbg(ql_dbg_init, base_vha, 0x0101,
				    "%s Req que: %d init failed.\n",
				    __func__, req->id);
			else
				ql_dbg(ql_dbg_init, base_vha, 0x0102,
				    "%s Req que: %d inited.\n",
				    __func__, req->id);
		}
	}
	return ret;
}

/*
* qla2x00_reset_adapter
*      Reset adapter.
*
* Input:
*      ha = adapter block pointer.
*/
void
qla2x00_reset_adapter(scsi_qla_host_t *vha)
{
	unsigned long flags = 0;
	struct qla_hw_data *ha = vha->hw;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

	vha->flags.online = 0;
	ha->isp_ops->disable_intrs(ha);

	spin_lock_irqsave(&ha->hardware_lock, flags);
	WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
	RD_REG_WORD(&reg->hccr);			/* PCI Posting. */
	WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
	RD_REG_WORD(&reg->hccr);			/* PCI Posting. */
	spin_unlock_irqrestore(&ha->hardware_lock, flags);
}

void
qla24xx_reset_adapter(scsi_qla_host_t *vha)
{
	unsigned long flags = 0;
	struct qla_hw_data *ha = vha->hw;
	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

	if (IS_P3P_TYPE(ha))
		return;

	vha->flags.online = 0;
	ha->isp_ops->disable_intrs(ha);

	spin_lock_irqsave(&ha->hardware_lock, flags);
	WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
	RD_REG_DWORD(&reg->hccr);
	WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
	RD_REG_DWORD(&reg->hccr);
	spin_unlock_irqrestore(&ha->hardware_lock, flags);

	if (IS_NOPOLLING_TYPE(ha))
		ha->isp_ops->enable_intrs(ha);
}

/* On sparc systems, obtain port and node WWN from firmware
 * properties.
 */
static void qla24xx_nvram_wwn_from_ofw(scsi_qla_host_t *vha,
	struct nvram_24xx *nv)
{
#ifdef CONFIG_SPARC
	struct qla_hw_data *ha = vha->hw;
	struct pci_dev *pdev = ha->pdev;
	struct device_node *dp = pci_device_to_OF_node(pdev);
	const u8 *val;
	int len;

	val = of_get_property(dp, "port-wwn", &len);
	if (val && len >= WWN_SIZE)
		memcpy(nv->port_name, val, WWN_SIZE);

	val = of_get_property(dp, "node-wwn", &len);
	if (val && len >= WWN_SIZE)
		memcpy(nv->node_name, val, WWN_SIZE);
#endif
}

int
qla24xx_nvram_config(scsi_qla_host_t *vha)
{
	int   rval;
	struct init_cb_24xx *icb;
	struct nvram_24xx *nv;
	uint32_t *dptr;
	uint8_t  *dptr1, *dptr2;
	uint32_t chksum;
	uint16_t cnt;
	struct qla_hw_data *ha = vha->hw;

	rval = QLA_SUCCESS;
	icb = (struct init_cb_24xx *)ha->init_cb;
	nv = ha->nvram;

	/* Determine NVRAM starting address. */
	if (ha->port_no == 0) {
		ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
		ha->vpd_base = FA_NVRAM_VPD0_ADDR;
	} else {
		ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
		ha->vpd_base = FA_NVRAM_VPD1_ADDR;
	}

	ha->nvram_size = sizeof(struct nvram_24xx);
	ha->vpd_size = FA_NVRAM_VPD_SIZE;

	/* Get VPD data into cache */
	ha->vpd = ha->nvram + VPD_OFFSET;
	ha->isp_ops->read_nvram(vha, (uint8_t *)ha->vpd,
	    ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4);

	/* Get NVRAM data into cache and calculate checksum. */
	dptr = (uint32_t *)nv;
	ha->isp_ops->read_nvram(vha, (uint8_t *)dptr, ha->nvram_base,
	    ha->nvram_size);
	for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++, dptr++)
		chksum += le32_to_cpu(*dptr);

	ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x006a,
	    "Contents of NVRAM\n");
	ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010d,
	    (uint8_t *)nv, ha->nvram_size);

	/* Bad NVRAM data, set defaults parameters. */
	if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
	    || nv->id[3] != ' ' ||
	    nv->nvram_version < cpu_to_le16(ICB_VERSION)) {
		/* Reset NVRAM data. */
		ql_log(ql_log_warn, vha, 0x006b,
		    "Inconsistent NVRAM detected: checksum=0x%x id=%c "
		    "version=0x%x.\n", chksum, nv->id[0], nv->nvram_version);
		ql_log(ql_log_warn, vha, 0x006c,
		    "Falling back to functioning (yet invalid -- WWPN) "
		    "defaults.\n");

		/*
		 * Set default initialization control block.
		 */
		memset(nv, 0, ha->nvram_size);
		nv->nvram_version = cpu_to_le16(ICB_VERSION);
		nv->version = cpu_to_le16(ICB_VERSION);
		nv->frame_payload_size = 2048;
		nv->execution_throttle = cpu_to_le16(0xFFFF);
		nv->exchange_count = cpu_to_le16(0);
		nv->hard_address = cpu_to_le16(124);
		nv->port_name[0] = 0x21;
		nv->port_name[1] = 0x00 + ha->port_no + 1;
		nv->port_name[2] = 0x00;
		nv->port_name[3] = 0xe0;
		nv->port_name[4] = 0x8b;
		nv->port_name[5] = 0x1c;
		nv->port_name[6] = 0x55;
		nv->port_name[7] = 0x86;
		nv->node_name[0] = 0x20;
		nv->node_name[1] = 0x00;
		nv->node_name[2] = 0x00;
		nv->node_name[3] = 0xe0;
		nv->node_name[4] = 0x8b;
		nv->node_name[5] = 0x1c;
		nv->node_name[6] = 0x55;
		nv->node_name[7] = 0x86;
		qla24xx_nvram_wwn_from_ofw(vha, nv);
		nv->login_retry_count = cpu_to_le16(8);
		nv->interrupt_delay_timer = cpu_to_le16(0);
		nv->login_timeout = cpu_to_le16(0);
		nv->firmware_options_1 =
		    cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
		nv->firmware_options_2 = cpu_to_le32(2 << 4);
		nv->firmware_options_2 |= cpu_to_le32(BIT_12);
		nv->firmware_options_3 = cpu_to_le32(2 << 13);
		nv->host_p = cpu_to_le32(BIT_11|BIT_10);
		nv->efi_parameters = cpu_to_le32(0);
		nv->reset_delay = 5;
		nv->max_luns_per_target = cpu_to_le16(128);
		nv->port_down_retry_count = cpu_to_le16(30);
		nv->link_down_timeout = cpu_to_le16(30);

		rval = 1;
	}

	if (!qla_ini_mode_enabled(vha)) {
		/* Don't enable full login after initial LIP */
		nv->firmware_options_1 &= cpu_to_le32(~BIT_13);
		/* Don't enable LIP full login for initiator */
		nv->host_p &= cpu_to_le32(~BIT_10);
	}

	qlt_24xx_config_nvram_stage1(vha, nv);

	/* Reset Initialization control block */
	memset(icb, 0, ha->init_cb_size);

	/* Copy 1st segment. */
	dptr1 = (uint8_t *)icb;
	dptr2 = (uint8_t *)&nv->version;
	cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
	while (cnt--)
		*dptr1++ = *dptr2++;

	icb->login_retry_count = nv->login_retry_count;
	icb->link_down_on_nos = nv->link_down_on_nos;

	/* Copy 2nd segment. */
	dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
	dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
	cnt = (uint8_t *)&icb->reserved_3 -
	    (uint8_t *)&icb->interrupt_delay_timer;
	while (cnt--)
		*dptr1++ = *dptr2++;

	/*
	 * Setup driver NVRAM options.
	 */
	qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name),
	    "QLA2462");

	qlt_24xx_config_nvram_stage2(vha, icb);

	if (nv->host_p & cpu_to_le32(BIT_15)) {
		/* Use alternate WWN? */
		memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
		memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
	}

	/* Prepare nodename */
	if ((icb->firmware_options_1 & cpu_to_le32(BIT_14)) == 0) {
		/*
		 * Firmware will apply the following mask if the nodename was
		 * not provided.
		 */
		memcpy(icb->node_name, icb->port_name, WWN_SIZE);
		icb->node_name[0] &= 0xF0;
	}

	/* Set host adapter parameters. */
	ha->flags.disable_risc_code_load = 0;
	ha->flags.enable_lip_reset = 0;
	ha->flags.enable_lip_full_login =
	    le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
	ha->flags.enable_target_reset =
	    le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
	ha->flags.enable_led_scheme = 0;
	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;

	ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
	    (BIT_6 | BIT_5 | BIT_4)) >> 4;

	memcpy(ha->fw_seriallink_options24, nv->seriallink_options,
	    sizeof(ha->fw_seriallink_options24));

	/* save HBA serial number */
	ha->serial0 = icb->port_name[5];
	ha->serial1 = icb->port_name[6];
	ha->serial2 = icb->port_name[7];
	memcpy(vha->node_name, icb->node_name, WWN_SIZE);
	memcpy(vha->port_name, icb->port_name, WWN_SIZE);

	icb->execution_throttle = cpu_to_le16(0xFFFF);

	ha->retry_count = le16_to_cpu(nv->login_retry_count);

	/* Set minimum login_timeout to 4 seconds. */
	if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
		nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
	if (le16_to_cpu(nv->login_timeout) < 4)
		nv->login_timeout = cpu_to_le16(4);
	ha->login_timeout = le16_to_cpu(nv->login_timeout);

	/* Set minimum RATOV to 100 tenths of a second. */
	ha->r_a_tov = 100;

	ha->loop_reset_delay = nv->reset_delay;

	/* Link Down Timeout = 0:
	 *
	 * 	When Port Down timer expires we will start returning
	 *	I/O's to OS with "DID_NO_CONNECT".
	 *
	 * Link Down Timeout != 0:
	 *
	 *	 The driver waits for the link to come up after link down
	 *	 before returning I/Os to OS with "DID_NO_CONNECT".
	 */
	if (le16_to_cpu(nv->link_down_timeout) == 0) {
		ha->loop_down_abort_time =
		    (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
	} else {
		ha->link_down_timeout =	le16_to_cpu(nv->link_down_timeout);
		ha->loop_down_abort_time =
		    (LOOP_DOWN_TIME - ha->link_down_timeout);
	}

	/* Need enough time to try and get the port back. */
	ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
	if (qlport_down_retry)
		ha->port_down_retry_count = qlport_down_retry;

	/* Set login_retry_count */
	ha->login_retry_count  = le16_to_cpu(nv->login_retry_count);
	if (ha->port_down_retry_count ==
	    le16_to_cpu(nv->port_down_retry_count) &&
	    ha->port_down_retry_count > 3)
		ha->login_retry_count = ha->port_down_retry_count;
	else if (ha->port_down_retry_count > (int)ha->login_retry_count)
		ha->login_retry_count = ha->port_down_retry_count;
	if (ql2xloginretrycount)
		ha->login_retry_count = ql2xloginretrycount;

	/* Enable ZIO. */
	if (!vha->flags.init_done) {
		ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
		    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
		ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
		    le16_to_cpu(icb->interrupt_delay_timer): 2;
	}
	icb->firmware_options_2 &= cpu_to_le32(
	    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
	vha->flags.process_response_queue = 0;
	if (ha->zio_mode != QLA_ZIO_DISABLED) {
		ha->zio_mode = QLA_ZIO_MODE_6;

		ql_log(ql_log_info, vha, 0x006f,
		    "ZIO mode %d enabled; timer delay (%d us).\n",
		    ha->zio_mode, ha->zio_timer * 100);

		icb->firmware_options_2 |= cpu_to_le32(
		    (uint32_t)ha->zio_mode);
		icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
		vha->flags.process_response_queue = 1;
	}

	if (rval) {
		ql_log(ql_log_warn, vha, 0x0070,
		    "NVRAM configuration failed.\n");
	}
	return (rval);
}

uint8_t qla27xx_find_valid_image(struct scsi_qla_host *vha)
{
	struct qla27xx_image_status pri_image_status, sec_image_status;
	uint8_t valid_pri_image, valid_sec_image;
	uint32_t *wptr;
	uint32_t cnt, chksum, size;
	struct qla_hw_data *ha = vha->hw;

	valid_pri_image = valid_sec_image = 1;
	ha->active_image = 0;
	size = sizeof(struct qla27xx_image_status) / sizeof(uint32_t);

	if (!ha->flt_region_img_status_pri) {
		valid_pri_image = 0;
		goto check_sec_image;
	}

	qla24xx_read_flash_data(vha, (uint32_t *)(&pri_image_status),
	    ha->flt_region_img_status_pri, size);

	if (pri_image_status.signature != QLA27XX_IMG_STATUS_SIGN) {
		ql_dbg(ql_dbg_init, vha, 0x018b,
		    "Primary image signature (0x%x) not valid\n",
		    pri_image_status.signature);
		valid_pri_image = 0;
		goto check_sec_image;
	}

	wptr = (uint32_t *)(&pri_image_status);
	cnt = size;

	for (chksum = 0; cnt--; wptr++)
		chksum += le32_to_cpu(*wptr);
	if (chksum) {
		ql_dbg(ql_dbg_init, vha, 0x018c,
		    "Checksum validation failed for primary image (0x%x)\n",
		    chksum);
		valid_pri_image = 0;
	}

check_sec_image:
	if (!ha->flt_region_img_status_sec) {
		valid_sec_image = 0;
		goto check_valid_image;
	}

	qla24xx_read_flash_data(vha, (uint32_t *)(&sec_image_status),
	    ha->flt_region_img_status_sec, size);

	if (sec_image_status.signature != QLA27XX_IMG_STATUS_SIGN) {
		ql_dbg(ql_dbg_init, vha, 0x018d,
		    "Secondary image signature(0x%x) not valid\n",
		    sec_image_status.signature);
		valid_sec_image = 0;
		goto check_valid_image;
	}

	wptr = (uint32_t *)(&sec_image_status);
	cnt = size;
	for (chksum = 0; cnt--; wptr++)
		chksum += le32_to_cpu(*wptr);
	if (chksum) {
		ql_dbg(ql_dbg_init, vha, 0x018e,
		    "Checksum validation failed for secondary image (0x%x)\n",
		    chksum);
		valid_sec_image = 0;
	}

check_valid_image:
	if (valid_pri_image && (pri_image_status.image_status_mask & 0x1))
		ha->active_image = QLA27XX_PRIMARY_IMAGE;
	if (valid_sec_image && (sec_image_status.image_status_mask & 0x1)) {
		if (!ha->active_image ||
		    pri_image_status.generation_number <
		    sec_image_status.generation_number)
			ha->active_image = QLA27XX_SECONDARY_IMAGE;
	}

	ql_dbg(ql_dbg_init, vha, 0x018f, "%s image\n",
	    ha->active_image == 0 ? "default bootld and fw" :
	    ha->active_image == 1 ? "primary" :
	    ha->active_image == 2 ? "secondary" :
	    "Invalid");

	return ha->active_image;
}

static int
qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
    uint32_t faddr)
{
	int	rval = QLA_SUCCESS;
	int	segments, fragment;
	uint32_t *dcode, dlen;
	uint32_t risc_addr;
	uint32_t risc_size;
	uint32_t i;
	struct qla_hw_data *ha = vha->hw;
	struct req_que *req = ha->req_q_map[0];

	ql_dbg(ql_dbg_init, vha, 0x008b,
	    "FW: Loading firmware from flash (%x).\n", faddr);

	rval = QLA_SUCCESS;

	segments = FA_RISC_CODE_SEGMENTS;
	dcode = (uint32_t *)req->ring;
	*srisc_addr = 0;

	if (IS_QLA27XX(ha) &&
	    qla27xx_find_valid_image(vha) == QLA27XX_SECONDARY_IMAGE)
		faddr = ha->flt_region_fw_sec;

	/* Validate firmware image by checking version. */
	qla24xx_read_flash_data(vha, dcode, faddr + 4, 4);
	for (i = 0; i < 4; i++)
		dcode[i] = be32_to_cpu(dcode[i]);
	if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
	    dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
	    (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
		dcode[3] == 0)) {
		ql_log(ql_log_fatal, vha, 0x008c,
		    "Unable to verify the integrity of flash firmware "
		    "image.\n");
		ql_log(ql_log_fatal, vha, 0x008d,
		    "Firmware data: %08x %08x %08x %08x.\n",
		    dcode[0], dcode[1], dcode[2], dcode[3]);

		return QLA_FUNCTION_FAILED;
	}

	while (segments && rval == QLA_SUCCESS) {
		/* Read segment's load information. */
		qla24xx_read_flash_data(vha, dcode, faddr, 4);

		risc_addr = be32_to_cpu(dcode[2]);
		*srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
		risc_size = be32_to_cpu(dcode[3]);

		fragment = 0;
		while (risc_size > 0 && rval == QLA_SUCCESS) {
			dlen = (uint32_t)(ha->fw_transfer_size >> 2);
			if (dlen > risc_size)
				dlen = risc_size;

			ql_dbg(ql_dbg_init, vha, 0x008e,
			    "Loading risc segment@ risc addr %x "
			    "number of dwords 0x%x offset 0x%x.\n",
			    risc_addr, dlen, faddr);

			qla24xx_read_flash_data(vha, dcode, faddr, dlen);
			for (i = 0; i < dlen; i++)
				dcode[i] = swab32(dcode[i]);

			rval = qla2x00_load_ram(vha, req->dma, risc_addr,
			    dlen);
			if (rval) {
				ql_log(ql_log_fatal, vha, 0x008f,
				    "Failed to load segment %d of firmware.\n",
				    fragment);
				return QLA_FUNCTION_FAILED;
			}

			faddr += dlen;
			risc_addr += dlen;
			risc_size -= dlen;
			fragment++;
		}

		/* Next segment. */
		segments--;
	}

	if (!IS_QLA27XX(ha))
		return rval;

	if (ha->fw_dump_template)
		vfree(ha->fw_dump_template);
	ha->fw_dump_template = NULL;
	ha->fw_dump_template_len = 0;

	ql_dbg(ql_dbg_init, vha, 0x0161,
	    "Loading fwdump template from %x\n", faddr);
	qla24xx_read_flash_data(vha, dcode, faddr, 7);
	risc_size = be32_to_cpu(dcode[2]);
	ql_dbg(ql_dbg_init, vha, 0x0162,
	    "-> array size %x dwords\n", risc_size);
	if (risc_size == 0 || risc_size == ~0)
		goto default_template;

	dlen = (risc_size - 8) * sizeof(*dcode);
	ql_dbg(ql_dbg_init, vha, 0x0163,
	    "-> template allocating %x bytes...\n", dlen);
	ha->fw_dump_template = vmalloc(dlen);
	if (!ha->fw_dump_template) {
		ql_log(ql_log_warn, vha, 0x0164,
		    "Failed fwdump template allocate %x bytes.\n", risc_size);
		goto default_template;
	}

	faddr += 7;
	risc_size -= 8;
	dcode = ha->fw_dump_template;
	qla24xx_read_flash_data(vha, dcode, faddr, risc_size);
	for (i = 0; i < risc_size; i++)
		dcode[i] = le32_to_cpu(dcode[i]);

	if (!qla27xx_fwdt_template_valid(dcode)) {
		ql_log(ql_log_warn, vha, 0x0165,
		    "Failed fwdump template validate\n");
		goto default_template;
	}

	dlen = qla27xx_fwdt_template_size(dcode);
	ql_dbg(ql_dbg_init, vha, 0x0166,
	    "-> template size %x bytes\n", dlen);
	if (dlen > risc_size * sizeof(*dcode)) {
		ql_log(ql_log_warn, vha, 0x0167,
		    "Failed fwdump template exceeds array by %x bytes\n",
		    (uint32_t)(dlen - risc_size * sizeof(*dcode)));
		goto default_template;
	}
	ha->fw_dump_template_len = dlen;
	return rval;

default_template:
	ql_log(ql_log_warn, vha, 0x0168, "Using default fwdump template\n");
	if (ha->fw_dump_template)
		vfree(ha->fw_dump_template);
	ha->fw_dump_template = NULL;
	ha->fw_dump_template_len = 0;

	dlen = qla27xx_fwdt_template_default_size();
	ql_dbg(ql_dbg_init, vha, 0x0169,
	    "-> template allocating %x bytes...\n", dlen);
	ha->fw_dump_template = vmalloc(dlen);
	if (!ha->fw_dump_template) {
		ql_log(ql_log_warn, vha, 0x016a,
		    "Failed fwdump template allocate %x bytes.\n", risc_size);
		goto failed_template;
	}

	dcode = ha->fw_dump_template;
	risc_size = dlen / sizeof(*dcode);
	memcpy(dcode, qla27xx_fwdt_template_default(), dlen);
	for (i = 0; i < risc_size; i++)
		dcode[i] = be32_to_cpu(dcode[i]);

	if (!qla27xx_fwdt_template_valid(ha->fw_dump_template)) {
		ql_log(ql_log_warn, vha, 0x016b,
		    "Failed fwdump template validate\n");
		goto failed_template;
	}

	dlen = qla27xx_fwdt_template_size(ha->fw_dump_template);
	ql_dbg(ql_dbg_init, vha, 0x016c,
	    "-> template size %x bytes\n", dlen);
	ha->fw_dump_template_len = dlen;
	return rval;

failed_template:
	ql_log(ql_log_warn, vha, 0x016d, "Failed default fwdump template\n");
	if (ha->fw_dump_template)
		vfree(ha->fw_dump_template);
	ha->fw_dump_template = NULL;
	ha->fw_dump_template_len = 0;
	return rval;
}

#define QLA_FW_URL "http://ldriver.qlogic.com/firmware/"

int
qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
	int	rval;
	int	i, fragment;
	uint16_t *wcode, *fwcode;
	uint32_t risc_addr, risc_size, fwclen, wlen, *seg;
	struct fw_blob *blob;
	struct qla_hw_data *ha = vha->hw;
	struct req_que *req = ha->req_q_map[0];

	/* Load firmware blob. */
	blob = qla2x00_request_firmware(vha);
	if (!blob) {
		ql_log(ql_log_info, vha, 0x0083,
		    "Firmware image unavailable.\n");
		ql_log(ql_log_info, vha, 0x0084,
		    "Firmware images can be retrieved from: "QLA_FW_URL ".\n");
		return QLA_FUNCTION_FAILED;
	}

	rval = QLA_SUCCESS;

	wcode = (uint16_t *)req->ring;
	*srisc_addr = 0;
	fwcode = (uint16_t *)blob->fw->data;
	fwclen = 0;

	/* Validate firmware image by checking version. */
	if (blob->fw->size < 8 * sizeof(uint16_t)) {
		ql_log(ql_log_fatal, vha, 0x0085,
		    "Unable to verify integrity of firmware image (%Zd).\n",
		    blob->fw->size);
		goto fail_fw_integrity;
	}
	for (i = 0; i < 4; i++)
		wcode[i] = be16_to_cpu(fwcode[i + 4]);
	if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff &&
	    wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 &&
		wcode[2] == 0 && wcode[3] == 0)) {
		ql_log(ql_log_fatal, vha, 0x0086,
		    "Unable to verify integrity of firmware image.\n");
		ql_log(ql_log_fatal, vha, 0x0087,
		    "Firmware data: %04x %04x %04x %04x.\n",
		    wcode[0], wcode[1], wcode[2], wcode[3]);
		goto fail_fw_integrity;
	}

	seg = blob->segs;
	while (*seg && rval == QLA_SUCCESS) {
		risc_addr = *seg;
		*srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr;
		risc_size = be16_to_cpu(fwcode[3]);

		/* Validate firmware image size. */
		fwclen += risc_size * sizeof(uint16_t);
		if (blob->fw->size < fwclen) {
			ql_log(ql_log_fatal, vha, 0x0088,
			    "Unable to verify integrity of firmware image "
			    "(%Zd).\n", blob->fw->size);
			goto fail_fw_integrity;
		}

		fragment = 0;
		while (risc_size > 0 && rval == QLA_SUCCESS) {
			wlen = (uint16_t)(ha->fw_transfer_size >> 1);
			if (wlen > risc_size)
				wlen = risc_size;
			ql_dbg(ql_dbg_init, vha, 0x0089,
			    "Loading risc segment@ risc addr %x number of "
			    "words 0x%x.\n", risc_addr, wlen);

			for (i = 0; i < wlen; i++)
				wcode[i] = swab16(fwcode[i]);

			rval = qla2x00_load_ram(vha, req->dma, risc_addr,
			    wlen);
			if (rval) {
				ql_log(ql_log_fatal, vha, 0x008a,
				    "Failed to load segment %d of firmware.\n",
				    fragment);
				break;
			}

			fwcode += wlen;
			risc_addr += wlen;
			risc_size -= wlen;
			fragment++;
		}

		/* Next segment. */
		seg++;
	}
	return rval;

fail_fw_integrity:
	return QLA_FUNCTION_FAILED;
}

static int
qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
	int	rval;
	int	segments, fragment;
	uint32_t *dcode, dlen;
	uint32_t risc_addr;
	uint32_t risc_size;
	uint32_t i;
	struct fw_blob *blob;
	const uint32_t *fwcode;
	uint32_t fwclen;
	struct qla_hw_data *ha = vha->hw;
	struct req_que *req = ha->req_q_map[0];

	/* Load firmware blob. */
	blob = qla2x00_request_firmware(vha);
	if (!blob) {
		ql_log(ql_log_warn, vha, 0x0090,
		    "Firmware image unavailable.\n");
		ql_log(ql_log_warn, vha, 0x0091,
		    "Firmware images can be retrieved from: "
		    QLA_FW_URL ".\n");

		return QLA_FUNCTION_FAILED;
	}

	ql_dbg(ql_dbg_init, vha, 0x0092,
	    "FW: Loading via request-firmware.\n");

	rval = QLA_SUCCESS;

	segments = FA_RISC_CODE_SEGMENTS;
	dcode = (uint32_t *)req->ring;
	*srisc_addr = 0;
	fwcode = (uint32_t *)blob->fw->data;
	fwclen = 0;

	/* Validate firmware image by checking version. */
	if (blob->fw->size < 8 * sizeof(uint32_t)) {
		ql_log(ql_log_fatal, vha, 0x0093,
		    "Unable to verify integrity of firmware image (%Zd).\n",
		    blob->fw->size);
		return QLA_FUNCTION_FAILED;
	}
	for (i = 0; i < 4; i++)
		dcode[i] = be32_to_cpu(fwcode[i + 4]);
	if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
	    dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
	    (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
		dcode[3] == 0)) {
		ql_log(ql_log_fatal, vha, 0x0094,
		    "Unable to verify integrity of firmware image (%Zd).\n",
		    blob->fw->size);
		ql_log(ql_log_fatal, vha, 0x0095,
		    "Firmware data: %08x %08x %08x %08x.\n",
		    dcode[0], dcode[1], dcode[2], dcode[3]);
		return QLA_FUNCTION_FAILED;
	}

	while (segments && rval == QLA_SUCCESS) {
		risc_addr = be32_to_cpu(fwcode[2]);
		*srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
		risc_size = be32_to_cpu(fwcode[3]);

		/* Validate firmware image size. */
		fwclen += risc_size * sizeof(uint32_t);
		if (blob->fw->size < fwclen) {
			ql_log(ql_log_fatal, vha, 0x0096,
			    "Unable to verify integrity of firmware image "
			    "(%Zd).\n", blob->fw->size);
			return QLA_FUNCTION_FAILED;
		}

		fragment = 0;
		while (risc_size > 0 && rval == QLA_SUCCESS) {
			dlen = (uint32_t)(ha->fw_transfer_size >> 2);
			if (dlen > risc_size)
				dlen = risc_size;

			ql_dbg(ql_dbg_init, vha, 0x0097,
			    "Loading risc segment@ risc addr %x "
			    "number of dwords 0x%x.\n", risc_addr, dlen);

			for (i = 0; i < dlen; i++)
				dcode[i] = swab32(fwcode[i]);

			rval = qla2x00_load_ram(vha, req->dma, risc_addr,
			    dlen);
			if (rval) {
				ql_log(ql_log_fatal, vha, 0x0098,
				    "Failed to load segment %d of firmware.\n",
				    fragment);
				return QLA_FUNCTION_FAILED;
			}

			fwcode += dlen;
			risc_addr += dlen;
			risc_size -= dlen;
			fragment++;
		}

		/* Next segment. */
		segments--;
	}

	if (!IS_QLA27XX(ha))
		return rval;

	if (ha->fw_dump_template)
		vfree(ha->fw_dump_template);
	ha->fw_dump_template = NULL;
	ha->fw_dump_template_len = 0;

	ql_dbg(ql_dbg_init, vha, 0x171,
	    "Loading fwdump template from %x\n",
	    (uint32_t)((void *)fwcode - (void *)blob->fw->data));
	risc_size = be32_to_cpu(fwcode[2]);
	ql_dbg(ql_dbg_init, vha, 0x172,
	    "-> array size %x dwords\n", risc_size);
	if (risc_size == 0 || risc_size == ~0)
		goto default_template;

	dlen = (risc_size - 8) * sizeof(*fwcode);
	ql_dbg(ql_dbg_init, vha, 0x0173,
	    "-> template allocating %x bytes...\n", dlen);
	ha->fw_dump_template = vmalloc(dlen);
	if (!ha->fw_dump_template) {
		ql_log(ql_log_warn, vha, 0x0174,
		    "Failed fwdump template allocate %x bytes.\n", risc_size);
		goto default_template;
	}

	fwcode += 7;
	risc_size -= 8;
	dcode = ha->fw_dump_template;
	for (i = 0; i < risc_size; i++)
		dcode[i] = le32_to_cpu(fwcode[i]);

	if (!qla27xx_fwdt_template_valid(dcode)) {
		ql_log(ql_log_warn, vha, 0x0175,
		    "Failed fwdump template validate\n");
		goto default_template;
	}

	dlen = qla27xx_fwdt_template_size(dcode);
	ql_dbg(ql_dbg_init, vha, 0x0176,
	    "-> template size %x bytes\n", dlen);
	if (dlen > risc_size * sizeof(*fwcode)) {
		ql_log(ql_log_warn, vha, 0x0177,
		    "Failed fwdump template exceeds array by %x bytes\n",
		    (uint32_t)(dlen - risc_size * sizeof(*fwcode)));
		goto default_template;
	}
	ha->fw_dump_template_len = dlen;
	return rval;

default_template:
	ql_log(ql_log_warn, vha, 0x0178, "Using default fwdump template\n");
	if (ha->fw_dump_template)
		vfree(ha->fw_dump_template);
	ha->fw_dump_template = NULL;
	ha->fw_dump_template_len = 0;

	dlen = qla27xx_fwdt_template_default_size();
	ql_dbg(ql_dbg_init, vha, 0x0179,
	    "-> template allocating %x bytes...\n", dlen);
	ha->fw_dump_template = vmalloc(dlen);
	if (!ha->fw_dump_template) {
		ql_log(ql_log_warn, vha, 0x017a,
		    "Failed fwdump template allocate %x bytes.\n", risc_size);
		goto failed_template;
	}

	dcode = ha->fw_dump_template;
	risc_size = dlen / sizeof(*fwcode);
	fwcode = qla27xx_fwdt_template_default();
	for (i = 0; i < risc_size; i++)
		dcode[i] = be32_to_cpu(fwcode[i]);

	if (!qla27xx_fwdt_template_valid(ha->fw_dump_template)) {
		ql_log(ql_log_warn, vha, 0x017b,
		    "Failed fwdump template validate\n");
		goto failed_template;
	}

	dlen = qla27xx_fwdt_template_size(ha->fw_dump_template);
	ql_dbg(ql_dbg_init, vha, 0x017c,
	    "-> template size %x bytes\n", dlen);
	ha->fw_dump_template_len = dlen;
	return rval;

failed_template:
	ql_log(ql_log_warn, vha, 0x017d, "Failed default fwdump template\n");
	if (ha->fw_dump_template)
		vfree(ha->fw_dump_template);
	ha->fw_dump_template = NULL;
	ha->fw_dump_template_len = 0;
	return rval;
}

int
qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
	int rval;

	if (ql2xfwloadbin == 1)
		return qla81xx_load_risc(vha, srisc_addr);

	/*
	 * FW Load priority:
	 * 1) Firmware via request-firmware interface (.bin file).
	 * 2) Firmware residing in flash.
	 */
	rval = qla24xx_load_risc_blob(vha, srisc_addr);
	if (rval == QLA_SUCCESS)
		return rval;

	return qla24xx_load_risc_flash(vha, srisc_addr,
	    vha->hw->flt_region_fw);
}

int
qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
	int rval;
	struct qla_hw_data *ha = vha->hw;

	if (ql2xfwloadbin == 2)
		goto try_blob_fw;

	/*
	 * FW Load priority:
	 * 1) Firmware residing in flash.
	 * 2) Firmware via request-firmware interface (.bin file).
	 * 3) Golden-Firmware residing in flash -- limited operation.
	 */
	rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_fw);
	if (rval == QLA_SUCCESS)
		return rval;

try_blob_fw:
	rval = qla24xx_load_risc_blob(vha, srisc_addr);
	if (rval == QLA_SUCCESS || !ha->flt_region_gold_fw)
		return rval;

	ql_log(ql_log_info, vha, 0x0099,
	    "Attempting to fallback to golden firmware.\n");
	rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_gold_fw);
	if (rval != QLA_SUCCESS)
		return rval;

	ql_log(ql_log_info, vha, 0x009a, "Update operational firmware.\n");
	ha->flags.running_gold_fw = 1;
	return rval;
}

void
qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
{
	int ret, retries;
	struct qla_hw_data *ha = vha->hw;

	if (ha->flags.pci_channel_io_perm_failure)
		return;
	if (!IS_FWI2_CAPABLE(ha))
		return;
	if (!ha->fw_major_version)
		return;

	ret = qla2x00_stop_firmware(vha);
	for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
	    ret != QLA_INVALID_COMMAND && retries ; retries--) {
		ha->isp_ops->reset_chip(vha);
		if (ha->isp_ops->chip_diag(vha) != QLA_SUCCESS)
			continue;
		if (qla2x00_setup_chip(vha) != QLA_SUCCESS)
			continue;
		ql_log(ql_log_info, vha, 0x8015,
		    "Attempting retry of stop-firmware command.\n");
		ret = qla2x00_stop_firmware(vha);
	}
}

int
qla24xx_configure_vhba(scsi_qla_host_t *vha)
{
	int rval = QLA_SUCCESS;
	int rval2;
	uint16_t mb[MAILBOX_REGISTER_COUNT];
	struct qla_hw_data *ha = vha->hw;
	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
	struct req_que *req;
	struct rsp_que *rsp;

	if (!vha->vp_idx)
		return -EINVAL;

	rval = qla2x00_fw_ready(base_vha);
	if (vha->qpair)
		req = vha->qpair->req;
	else
		req = ha->req_q_map[0];
	rsp = req->rsp;

	if (rval == QLA_SUCCESS) {
		clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
		qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
	}

	vha->flags.management_server_logged_in = 0;

	/* Login to SNS first */
	rval2 = ha->isp_ops->fabric_login(vha, NPH_SNS, 0xff, 0xff, 0xfc, mb,
	    BIT_1);
	if (rval2 != QLA_SUCCESS || mb[0] != MBS_COMMAND_COMPLETE) {
		if (rval2 == QLA_MEMORY_ALLOC_FAILED)
			ql_dbg(ql_dbg_init, vha, 0x0120,
			    "Failed SNS login: loop_id=%x, rval2=%d\n",
			    NPH_SNS, rval2);
		else
			ql_dbg(ql_dbg_init, vha, 0x0103,
			    "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
			    "mb[2]=%x mb[6]=%x mb[7]=%x.\n",
			    NPH_SNS, mb[0], mb[1], mb[2], mb[6], mb[7]);
		return (QLA_FUNCTION_FAILED);
	}

	atomic_set(&vha->loop_down_timer, 0);
	atomic_set(&vha->loop_state, LOOP_UP);
	set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
	set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
	rval = qla2x00_loop_resync(base_vha);

	return rval;
}

/* 84XX Support **************************************************************/

static LIST_HEAD(qla_cs84xx_list);
static DEFINE_MUTEX(qla_cs84xx_mutex);

static struct qla_chip_state_84xx *
qla84xx_get_chip(struct scsi_qla_host *vha)
{
	struct qla_chip_state_84xx *cs84xx;
	struct qla_hw_data *ha = vha->hw;

	mutex_lock(&qla_cs84xx_mutex);

	/* Find any shared 84xx chip. */
	list_for_each_entry(cs84xx, &qla_cs84xx_list, list) {
		if (cs84xx->bus == ha->pdev->bus) {
			kref_get(&cs84xx->kref);
			goto done;
		}
	}

	cs84xx = kzalloc(sizeof(*cs84xx), GFP_KERNEL);
	if (!cs84xx)
		goto done;

	kref_init(&cs84xx->kref);
	spin_lock_init(&cs84xx->access_lock);
	mutex_init(&cs84xx->fw_update_mutex);
	cs84xx->bus = ha->pdev->bus;

	list_add_tail(&cs84xx->list, &qla_cs84xx_list);
done:
	mutex_unlock(&qla_cs84xx_mutex);
	return cs84xx;
}

static void
__qla84xx_chip_release(struct kref *kref)
{
	struct qla_chip_state_84xx *cs84xx =
	    container_of(kref, struct qla_chip_state_84xx, kref);

	mutex_lock(&qla_cs84xx_mutex);
	list_del(&cs84xx->list);
	mutex_unlock(&qla_cs84xx_mutex);
	kfree(cs84xx);
}

void
qla84xx_put_chip(struct scsi_qla_host *vha)
{
	struct qla_hw_data *ha = vha->hw;
	if (ha->cs84xx)
		kref_put(&ha->cs84xx->kref, __qla84xx_chip_release);
}

static int
qla84xx_init_chip(scsi_qla_host_t *vha)
{
	int rval;
	uint16_t status[2];
	struct qla_hw_data *ha = vha->hw;

	mutex_lock(&ha->cs84xx->fw_update_mutex);

	rval = qla84xx_verify_chip(vha, status);

	mutex_unlock(&ha->cs84xx->fw_update_mutex);

	return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED:
	    QLA_SUCCESS;
}

/* 81XX Support **************************************************************/

int
qla81xx_nvram_config(scsi_qla_host_t *vha)
{
	int   rval;
	struct init_cb_81xx *icb;
	struct nvram_81xx *nv;
	uint32_t *dptr;
	uint8_t  *dptr1, *dptr2;
	uint32_t chksum;
	uint16_t cnt;
	struct qla_hw_data *ha = vha->hw;

	rval = QLA_SUCCESS;
	icb = (struct init_cb_81xx *)ha->init_cb;
	nv = ha->nvram;

	/* Determine NVRAM starting address. */
	ha->nvram_size = sizeof(struct nvram_81xx);
	ha->vpd_size = FA_NVRAM_VPD_SIZE;
	if (IS_P3P_TYPE(ha) || IS_QLA8031(ha))
		ha->vpd_size = FA_VPD_SIZE_82XX;

	/* Get VPD data into cache */
	ha->vpd = ha->nvram + VPD_OFFSET;
	ha->isp_ops->read_optrom(vha, ha->vpd, ha->flt_region_vpd << 2,
	    ha->vpd_size);

	/* Get NVRAM data into cache and calculate checksum. */
	ha->isp_ops->read_optrom(vha, ha->nvram, ha->flt_region_nvram << 2,
	    ha->nvram_size);
	dptr = (uint32_t *)nv;
	for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++, dptr++)
		chksum += le32_to_cpu(*dptr);

	ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x0111,
	    "Contents of NVRAM:\n");
	ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0112,
	    (uint8_t *)nv, ha->nvram_size);

	/* Bad NVRAM data, set defaults parameters. */
	if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
	    || nv->id[3] != ' ' ||
	    nv->nvram_version < cpu_to_le16(ICB_VERSION)) {
		/* Reset NVRAM data. */
		ql_log(ql_log_info, vha, 0x0073,
		    "Inconsistent NVRAM detected: checksum=0x%x id=%c "
		    "version=0x%x.\n", chksum, nv->id[0],
		    le16_to_cpu(nv->nvram_version));
		ql_log(ql_log_info, vha, 0x0074,
		    "Falling back to functioning (yet invalid -- WWPN) "
		    "defaults.\n");

		/*
		 * Set default initialization control block.
		 */
		memset(nv, 0, ha->nvram_size);
		nv->nvram_version = cpu_to_le16(ICB_VERSION);
		nv->version = cpu_to_le16(ICB_VERSION);
		nv->frame_payload_size = 2048;
		nv->execution_throttle = cpu_to_le16(0xFFFF);
		nv->exchange_count = cpu_to_le16(0);
		nv->port_name[0] = 0x21;
		nv->port_name[1] = 0x00 + ha->port_no + 1;
		nv->port_name[2] = 0x00;
		nv->port_name[3] = 0xe0;
		nv->port_name[4] = 0x8b;
		nv->port_name[5] = 0x1c;
		nv->port_name[6] = 0x55;
		nv->port_name[7] = 0x86;
		nv->node_name[0] = 0x20;
		nv->node_name[1] = 0x00;
		nv->node_name[2] = 0x00;
		nv->node_name[3] = 0xe0;
		nv->node_name[4] = 0x8b;
		nv->node_name[5] = 0x1c;
		nv->node_name[6] = 0x55;
		nv->node_name[7] = 0x86;
		nv->login_retry_count = cpu_to_le16(8);
		nv->interrupt_delay_timer = cpu_to_le16(0);
		nv->login_timeout = cpu_to_le16(0);
		nv->firmware_options_1 =
		    cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
		nv->firmware_options_2 = cpu_to_le32(2 << 4);
		nv->firmware_options_2 |= cpu_to_le32(BIT_12);
		nv->firmware_options_3 = cpu_to_le32(2 << 13);
		nv->host_p = cpu_to_le32(BIT_11|BIT_10);
		nv->efi_parameters = cpu_to_le32(0);
		nv->reset_delay = 5;
		nv->max_luns_per_target = cpu_to_le16(128);
		nv->port_down_retry_count = cpu_to_le16(30);
		nv->link_down_timeout = cpu_to_le16(180);
		nv->enode_mac[0] = 0x00;
		nv->enode_mac[1] = 0xC0;
		nv->enode_mac[2] = 0xDD;
		nv->enode_mac[3] = 0x04;
		nv->enode_mac[4] = 0x05;
		nv->enode_mac[5] = 0x06 + ha->port_no + 1;

		rval = 1;
	}

	if (IS_T10_PI_CAPABLE(ha))
		nv->frame_payload_size &= ~7;

	qlt_81xx_config_nvram_stage1(vha, nv);

	/* Reset Initialization control block */
	memset(icb, 0, ha->init_cb_size);

	/* Copy 1st segment. */
	dptr1 = (uint8_t *)icb;
	dptr2 = (uint8_t *)&nv->version;
	cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
	while (cnt--)
		*dptr1++ = *dptr2++;

	icb->login_retry_count = nv->login_retry_count;

	/* Copy 2nd segment. */
	dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
	dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
	cnt = (uint8_t *)&icb->reserved_5 -
	    (uint8_t *)&icb->interrupt_delay_timer;
	while (cnt--)
		*dptr1++ = *dptr2++;

	memcpy(icb->enode_mac, nv->enode_mac, sizeof(icb->enode_mac));
	/* Some boards (with valid NVRAMs) still have NULL enode_mac!! */
	if (!memcmp(icb->enode_mac, "\0\0\0\0\0\0", sizeof(icb->enode_mac))) {
		icb->enode_mac[0] = 0x00;
		icb->enode_mac[1] = 0xC0;
		icb->enode_mac[2] = 0xDD;
		icb->enode_mac[3] = 0x04;
		icb->enode_mac[4] = 0x05;
		icb->enode_mac[5] = 0x06 + ha->port_no + 1;
	}

	/* Use extended-initialization control block. */
	memcpy(ha->ex_init_cb, &nv->ex_version, sizeof(*ha->ex_init_cb));

	/*
	 * Setup driver NVRAM options.
	 */
	qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name),
	    "QLE8XXX");

	qlt_81xx_config_nvram_stage2(vha, icb);

	/* Use alternate WWN? */
	if (nv->host_p & cpu_to_le32(BIT_15)) {
		memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
		memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
	}

	/* Prepare nodename */
	if ((icb->firmware_options_1 & cpu_to_le32(BIT_14)) == 0) {
		/*
		 * Firmware will apply the following mask if the nodename was
		 * not provided.
		 */
		memcpy(icb->node_name, icb->port_name, WWN_SIZE);
		icb->node_name[0] &= 0xF0;
	}

	/* Set host adapter parameters. */
	ha->flags.disable_risc_code_load = 0;
	ha->flags.enable_lip_reset = 0;
	ha->flags.enable_lip_full_login =
	    le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
	ha->flags.enable_target_reset =
	    le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
	ha->flags.enable_led_scheme = 0;
	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;

	ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
	    (BIT_6 | BIT_5 | BIT_4)) >> 4;

	/* save HBA serial number */
	ha->serial0 = icb->port_name[5];
	ha->serial1 = icb->port_name[6];
	ha->serial2 = icb->port_name[7];
	memcpy(vha->node_name, icb->node_name, WWN_SIZE);
	memcpy(vha->port_name, icb->port_name, WWN_SIZE);

	icb->execution_throttle = cpu_to_le16(0xFFFF);

	ha->retry_count = le16_to_cpu(nv->login_retry_count);

	/* Set minimum login_timeout to 4 seconds. */
	if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
		nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
	if (le16_to_cpu(nv->login_timeout) < 4)
		nv->login_timeout = cpu_to_le16(4);
	ha->login_timeout = le16_to_cpu(nv->login_timeout);

	/* Set minimum RATOV to 100 tenths of a second. */
	ha->r_a_tov = 100;

	ha->loop_reset_delay = nv->reset_delay;

	/* Link Down Timeout = 0:
	 *
	 *	When Port Down timer expires we will start returning
	 *	I/O's to OS with "DID_NO_CONNECT".
	 *
	 * Link Down Timeout != 0:
	 *
	 *	 The driver waits for the link to come up after link down
	 *	 before returning I/Os to OS with "DID_NO_CONNECT".
	 */
	if (le16_to_cpu(nv->link_down_timeout) == 0) {
		ha->loop_down_abort_time =
		    (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
	} else {
		ha->link_down_timeout =	le16_to_cpu(nv->link_down_timeout);
		ha->loop_down_abort_time =
		    (LOOP_DOWN_TIME - ha->link_down_timeout);
	}

	/* Need enough time to try and get the port back. */
	ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
	if (qlport_down_retry)
		ha->port_down_retry_count = qlport_down_retry;

	/* Set login_retry_count */
	ha->login_retry_count  = le16_to_cpu(nv->login_retry_count);
	if (ha->port_down_retry_count ==
	    le16_to_cpu(nv->port_down_retry_count) &&
	    ha->port_down_retry_count > 3)
		ha->login_retry_count = ha->port_down_retry_count;
	else if (ha->port_down_retry_count > (int)ha->login_retry_count)
		ha->login_retry_count = ha->port_down_retry_count;
	if (ql2xloginretrycount)
		ha->login_retry_count = ql2xloginretrycount;

	/* if not running MSI-X we need handshaking on interrupts */
	if (!vha->hw->flags.msix_enabled && (IS_QLA83XX(ha) || IS_QLA27XX(ha)))
		icb->firmware_options_2 |= cpu_to_le32(BIT_22);

	/* Enable ZIO. */
	if (!vha->flags.init_done) {
		ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
		    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
		ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
		    le16_to_cpu(icb->interrupt_delay_timer): 2;
	}
	icb->firmware_options_2 &= cpu_to_le32(
	    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
	vha->flags.process_response_queue = 0;
	if (ha->zio_mode != QLA_ZIO_DISABLED) {
		ha->zio_mode = QLA_ZIO_MODE_6;

		ql_log(ql_log_info, vha, 0x0075,
		    "ZIO mode %d enabled; timer delay (%d us).\n",
		    ha->zio_mode,
		    ha->zio_timer * 100);

		icb->firmware_options_2 |= cpu_to_le32(
		    (uint32_t)ha->zio_mode);
		icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
		vha->flags.process_response_queue = 1;
	}

	if (rval) {
		ql_log(ql_log_warn, vha, 0x0076,
		    "NVRAM configuration failed.\n");
	}
	return (rval);
}

int
qla82xx_restart_isp(scsi_qla_host_t *vha)
{
	int status, rval;
	struct qla_hw_data *ha = vha->hw;
	struct req_que *req = ha->req_q_map[0];
	struct rsp_que *rsp = ha->rsp_q_map[0];
	struct scsi_qla_host *vp;
	unsigned long flags;

	status = qla2x00_init_rings(vha);
	if (!status) {
		clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
		ha->flags.chip_reset_done = 1;

		status = qla2x00_fw_ready(vha);
		if (!status) {
			/* Issue a marker after FW becomes ready. */
			qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
			vha->flags.online = 1;
			set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
		}

		/* if no cable then assume it's good */
		if ((vha->device_flags & DFLG_NO_CABLE))
			status = 0;
	}

	if (!status) {
		clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);

		if (!atomic_read(&vha->loop_down_timer)) {
			/*
			 * Issue marker command only when we are going
			 * to start the I/O .
			 */
			vha->marker_needed = 1;
		}

		ha->isp_ops->enable_intrs(ha);

		ha->isp_abort_cnt = 0;
		clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);

		/* Update the firmware version */
		status = qla82xx_check_md_needed(vha);

		if (ha->fce) {
			ha->flags.fce_enabled = 1;
			memset(ha->fce, 0,
			    fce_calc_size(ha->fce_bufs));
			rval = qla2x00_enable_fce_trace(vha,
			    ha->fce_dma, ha->fce_bufs, ha->fce_mb,
			    &ha->fce_bufs);
			if (rval) {
				ql_log(ql_log_warn, vha, 0x8001,
				    "Unable to reinitialize FCE (%d).\n",
				    rval);
				ha->flags.fce_enabled = 0;
			}
		}

		if (ha->eft) {
			memset(ha->eft, 0, EFT_SIZE);
			rval = qla2x00_enable_eft_trace(vha,
			    ha->eft_dma, EFT_NUM_BUFFERS);
			if (rval) {
				ql_log(ql_log_warn, vha, 0x8010,
				    "Unable to reinitialize EFT (%d).\n",
				    rval);
			}
		}
	}

	if (!status) {
		ql_dbg(ql_dbg_taskm, vha, 0x8011,
		    "qla82xx_restart_isp succeeded.\n");

		spin_lock_irqsave(&ha->vport_slock, flags);
		list_for_each_entry(vp, &ha->vp_list, list) {
			if (vp->vp_idx) {
				atomic_inc(&vp->vref_count);
				spin_unlock_irqrestore(&ha->vport_slock, flags);

				qla2x00_vp_abort_isp(vp);

				spin_lock_irqsave(&ha->vport_slock, flags);
				atomic_dec(&vp->vref_count);
			}
		}
		spin_unlock_irqrestore(&ha->vport_slock, flags);

	} else {
		ql_log(ql_log_warn, vha, 0x8016,
		    "qla82xx_restart_isp **** FAILED ****.\n");
	}

	return status;
}

void
qla81xx_update_fw_options(scsi_qla_host_t *vha)
{
	struct qla_hw_data *ha = vha->hw;

	/*  Hold status IOCBs until ABTS response received. */
	if (ql2xfwholdabts)
		ha->fw_options[3] |= BIT_12;

	/* Set Retry FLOGI in case of P2P connection */
	if (ha->operating_mode == P2P) {
		ha->fw_options[2] |= BIT_3;
		ql_dbg(ql_dbg_disc, vha, 0x2103,
		    "(%s): Setting FLOGI retry BIT in fw_options[2]: 0x%x\n",
			__func__, ha->fw_options[2]);
	}

	if (!ql2xetsenable)
		goto out;

	/* Enable ETS Burst. */
	memset(ha->fw_options, 0, sizeof(ha->fw_options));
	ha->fw_options[2] |= BIT_9;
out:
	qla2x00_set_fw_options(vha, ha->fw_options);
}

/*
 * qla24xx_get_fcp_prio
 *	Gets the fcp cmd priority value for the logged in port.
 *	Looks for a match of the port descriptors within
 *	each of the fcp prio config entries. If a match is found,
 *	the tag (priority) value is returned.
 *
 * Input:
 *	vha = scsi host structure pointer.
 *	fcport = port structure pointer.
 *
 * Return:
 *	non-zero (if found)
 *	-1 (if not found)
 *
 * Context:
 * 	Kernel context
 */
static int
qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
{
	int i, entries;
	uint8_t pid_match, wwn_match;
	int priority;
	uint32_t pid1, pid2;
	uint64_t wwn1, wwn2;
	struct qla_fcp_prio_entry *pri_entry;
	struct qla_hw_data *ha = vha->hw;

	if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled)
		return -1;

	priority = -1;
	entries = ha->fcp_prio_cfg->num_entries;
	pri_entry = &ha->fcp_prio_cfg->entry[0];

	for (i = 0; i < entries; i++) {
		pid_match = wwn_match = 0;

		if (!(pri_entry->flags & FCP_PRIO_ENTRY_VALID)) {
			pri_entry++;
			continue;
		}

		/* check source pid for a match */
		if (pri_entry->flags & FCP_PRIO_ENTRY_SPID_VALID) {
			pid1 = pri_entry->src_pid & INVALID_PORT_ID;
			pid2 = vha->d_id.b24 & INVALID_PORT_ID;
			if (pid1 == INVALID_PORT_ID)
				pid_match++;
			else if (pid1 == pid2)
				pid_match++;
		}

		/* check destination pid for a match */
		if (pri_entry->flags & FCP_PRIO_ENTRY_DPID_VALID) {
			pid1 = pri_entry->dst_pid & INVALID_PORT_ID;
			pid2 = fcport->d_id.b24 & INVALID_PORT_ID;
			if (pid1 == INVALID_PORT_ID)
				pid_match++;
			else if (pid1 == pid2)
				pid_match++;
		}

		/* check source WWN for a match */
		if (pri_entry->flags & FCP_PRIO_ENTRY_SWWN_VALID) {
			wwn1 = wwn_to_u64(vha->port_name);
			wwn2 = wwn_to_u64(pri_entry->src_wwpn);
			if (wwn2 == (uint64_t)-1)
				wwn_match++;
			else if (wwn1 == wwn2)
				wwn_match++;
		}

		/* check destination WWN for a match */
		if (pri_entry->flags & FCP_PRIO_ENTRY_DWWN_VALID) {
			wwn1 = wwn_to_u64(fcport->port_name);
			wwn2 = wwn_to_u64(pri_entry->dst_wwpn);
			if (wwn2 == (uint64_t)-1)
				wwn_match++;
			else if (wwn1 == wwn2)
				wwn_match++;
		}

		if (pid_match == 2 || wwn_match == 2) {
			/* Found a matching entry */
			if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID)
				priority = pri_entry->tag;
			break;
		}

		pri_entry++;
	}

	return priority;
}

/*
 * qla24xx_update_fcport_fcp_prio
 *	Activates fcp priority for the logged in fc port
 *
 * Input:
 *	vha = scsi host structure pointer.
 *	fcp = port structure pointer.
 *
 * Return:
 *	QLA_SUCCESS or QLA_FUNCTION_FAILED
 *
 * Context:
 *	Kernel context.
 */
int
qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
{
	int ret;
	int priority;
	uint16_t mb[5];

	if (fcport->port_type != FCT_TARGET ||
	    fcport->loop_id == FC_NO_LOOP_ID)
		return QLA_FUNCTION_FAILED;

	priority = qla24xx_get_fcp_prio(vha, fcport);
	if (priority < 0)
		return QLA_FUNCTION_FAILED;

	if (IS_P3P_TYPE(vha->hw)) {
		fcport->fcp_prio = priority & 0xf;
		return QLA_SUCCESS;
	}

	ret = qla24xx_set_fcp_prio(vha, fcport->loop_id, priority, mb);
	if (ret == QLA_SUCCESS) {
		if (fcport->fcp_prio != priority)
			ql_dbg(ql_dbg_user, vha, 0x709e,
			    "Updated FCP_CMND priority - value=%d loop_id=%d "
			    "port_id=%02x%02x%02x.\n", priority,
			    fcport->loop_id, fcport->d_id.b.domain,
			    fcport->d_id.b.area, fcport->d_id.b.al_pa);
		fcport->fcp_prio = priority & 0xf;
	} else
		ql_dbg(ql_dbg_user, vha, 0x704f,
		    "Unable to update FCP_CMND priority - ret=0x%x for "
		    "loop_id=%d port_id=%02x%02x%02x.\n", ret, fcport->loop_id,
		    fcport->d_id.b.domain, fcport->d_id.b.area,
		    fcport->d_id.b.al_pa);
	return  ret;
}

/*
 * qla24xx_update_all_fcp_prio
 *	Activates fcp priority for all the logged in ports
 *
 * Input:
 *	ha = adapter block pointer.
 *
 * Return:
 *	QLA_SUCCESS or QLA_FUNCTION_FAILED
 *
 * Context:
 *	Kernel context.
 */
int
qla24xx_update_all_fcp_prio(scsi_qla_host_t *vha)
{
	int ret;
	fc_port_t *fcport;

	ret = QLA_FUNCTION_FAILED;
	/* We need to set priority for all logged in ports */
	list_for_each_entry(fcport, &vha->vp_fcports, list)
		ret = qla24xx_update_fcport_fcp_prio(vha, fcport);

	return ret;
}

struct qla_qpair *qla2xxx_create_qpair(struct scsi_qla_host *vha, int qos, int vp_idx)
{
	int rsp_id = 0;
	int  req_id = 0;
	int i;
	struct qla_hw_data *ha = vha->hw;
	uint16_t qpair_id = 0;
	struct qla_qpair *qpair = NULL;
	struct qla_msix_entry *msix;

	if (!(ha->fw_attributes & BIT_6) || !ha->flags.msix_enabled) {
		ql_log(ql_log_warn, vha, 0x00181,
		    "FW/Driver is not multi-queue capable.\n");
		return NULL;
	}

	if (ql2xmqsupport) {
		qpair = kzalloc(sizeof(struct qla_qpair), GFP_KERNEL);
		if (qpair == NULL) {
			ql_log(ql_log_warn, vha, 0x0182,
			    "Failed to allocate memory for queue pair.\n");
			return NULL;
		}
		memset(qpair, 0, sizeof(struct qla_qpair));

		qpair->hw = vha->hw;

		/* Assign available que pair id */
		mutex_lock(&ha->mq_lock);
		qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs);
		if (qpair_id >= ha->max_qpairs) {
			mutex_unlock(&ha->mq_lock);
			ql_log(ql_log_warn, vha, 0x0183,
			    "No resources to create additional q pair.\n");
			goto fail_qid_map;
		}
		set_bit(qpair_id, ha->qpair_qid_map);
		ha->queue_pair_map[qpair_id] = qpair;
		qpair->id = qpair_id;
		qpair->vp_idx = vp_idx;

		for (i = 0; i < ha->msix_count; i++) {
			msix = &ha->msix_entries[i];
			if (msix->in_use)
				continue;
			qpair->msix = msix;
			ql_log(ql_dbg_multiq, vha, 0xc00f,
			    "Vector %x selected for qpair\n", msix->vector);
			break;
		}
		if (!qpair->msix) {
			ql_log(ql_log_warn, vha, 0x0184,
			    "Out of MSI-X vectors!.\n");
			goto fail_msix;
		}

		qpair->msix->in_use = 1;
		list_add_tail(&qpair->qp_list_elem, &vha->qp_list);

		mutex_unlock(&ha->mq_lock);

		/* Create response queue first */
		rsp_id = qla25xx_create_rsp_que(ha, 0, 0, 0, qpair);
		if (!rsp_id) {
			ql_log(ql_log_warn, vha, 0x0185,
			    "Failed to create response queue.\n");
			goto fail_rsp;
		}

		qpair->rsp = ha->rsp_q_map[rsp_id];

		/* Create request queue */
		req_id = qla25xx_create_req_que(ha, 0, vp_idx, 0, rsp_id, qos);
		if (!req_id) {
			ql_log(ql_log_warn, vha, 0x0186,
			    "Failed to create request queue.\n");
			goto fail_req;
		}

		qpair->req = ha->req_q_map[req_id];
		qpair->rsp->req = qpair->req;

		if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
			if (ha->fw_attributes & BIT_4)
				qpair->difdix_supported = 1;
		}

		qpair->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
		if (!qpair->srb_mempool) {
			ql_log(ql_log_warn, vha, 0x0191,
			    "Failed to create srb mempool for qpair %d\n",
			    qpair->id);
			goto fail_mempool;
		}

		/* Mark as online */
		qpair->online = 1;

		if (!vha->flags.qpairs_available)
			vha->flags.qpairs_available = 1;

		ql_dbg(ql_dbg_multiq, vha, 0xc00d,
		    "Request/Response queue pair created, id %d\n",
		    qpair->id);
		ql_dbg(ql_dbg_init, vha, 0x0187,
		    "Request/Response queue pair created, id %d\n",
		    qpair->id);
	}
	return qpair;

fail_mempool:
fail_req:
	qla25xx_delete_rsp_que(vha, qpair->rsp);
fail_rsp:
	mutex_lock(&ha->mq_lock);
	qpair->msix->in_use = 0;
	list_del(&qpair->qp_list_elem);
	if (list_empty(&vha->qp_list))
		vha->flags.qpairs_available = 0;
fail_msix:
	ha->queue_pair_map[qpair_id] = NULL;
	clear_bit(qpair_id, ha->qpair_qid_map);
	mutex_unlock(&ha->mq_lock);
fail_qid_map:
	kfree(qpair);
	return NULL;
}

int qla2xxx_delete_qpair(struct scsi_qla_host *vha, struct qla_qpair *qpair)
{
	int ret;
	struct qla_hw_data *ha = qpair->hw;

	qpair->delete_in_progress = 1;
	while (atomic_read(&qpair->ref_count))
		msleep(500);

	ret = qla25xx_delete_req_que(vha, qpair->req);
	if (ret != QLA_SUCCESS)
		goto fail;
	ret = qla25xx_delete_rsp_que(vha, qpair->rsp);
	if (ret != QLA_SUCCESS)
		goto fail;

	mutex_lock(&ha->mq_lock);
	ha->queue_pair_map[qpair->id] = NULL;
	clear_bit(qpair->id, ha->qpair_qid_map);
	list_del(&qpair->qp_list_elem);
	if (list_empty(&vha->qp_list))
		vha->flags.qpairs_available = 0;
	mempool_destroy(qpair->srb_mempool);
	kfree(qpair);
	mutex_unlock(&ha->mq_lock);

	return QLA_SUCCESS;
fail:
	return ret;
}