linux_dsm_epyc7002/net/l2tp/Makefile

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the L2TP.
#

obj-$(CONFIG_L2TP) += l2tp_core.o

# Build l2tp as modules if L2TP is M
obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_PPPOL2TP)) += l2tp_ppp.o
obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_L2TP_IP)) += l2tp_ip.o
obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_L2TP_V3)) += l2tp_netlink.o
obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_L2TP_ETH)) += l2tp_eth.o
obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_L2TP_DEBUGFS)) += l2tp_debugfs.o
ifneq ($(CONFIG_IPV6),)
obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_L2TP_IP)) += l2tp_ip6.o
endif
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a /uapi/ one with no licensing information in it, - file was a /uapi/ one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non /uapi/ files that summary was: SPDX license identifier # files ---------------------------------------------------\|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a /uapi/ path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------\|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the /uapi/ ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------\|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2017-11-01 21:07:57 +07:00			`# SPDX-License-Identifier: GPL-2.0`
l2tp: Relocate pppol2tp driver to new net/l2tp directory This patch moves the existing pppol2tp driver from drivers/net into a new net/l2tp directory, which is where the upcoming L2TPv3 code will live. The existing CONFIG_PPPOL2TP config option is left in its current place to avoid "make oldconfig" issues when an existing pppol2tp user takes this change. (This is the same approach used for the pppoatm driver, which moved to net/atm.) There are no code changes. The existing drivers/net/pppol2tp.c is simply moved to net/l2tp. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2010-04-02 13:18:28 +07:00			`#`
			`# Makefile for the L2TP.`
			`#`

l2tp: Split pppol2tp patch into separate l2tp and ppp parts This patch splits the pppol2tp driver into separate L2TP and PPP parts to prepare for L2TPv3 support. In L2TPv3, protocols other than PPP can be carried, so this split creates a common L2TP core that will handle the common L2TP bits which protocol support modules such as PPP will use. Note that the existing pppol2tp module is split into l2tp_core and l2tp_ppp by this change. There are no feature changes here. Internally, however, there are significant changes, mostly to handle the separation of PPP-specific data from the L2TP session and to provide hooks in the core for modules like PPP to access. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2010-04-02 13:18:33 +07:00			`obj-$(CONFIG_L2TP) += l2tp_core.o`

			`# Build l2tp as modules if L2TP is M`
			`obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_PPPOL2TP)) += l2tp_ppp.o`
l2tp: Add L2TPv3 IP encapsulation (no UDP) support This patch adds a new L2TPIP socket family and modifies the core to handle the case where there is no UDP header in the L2TP packet. L2TP/IP uses IP protocol 115. Since L2TP/UDP and L2TP/IP packets differ in layout, the datapath packet handling code needs changes too. Userspace uses an L2TPIP socket instead of a UDP socket when IP encapsulation is required. We can't use raw sockets for this because the semantics of raw sockets don't lend themselves to the socket-per-tunnel model - we need to Signed-off-by: David S. Miller <davem@davemloft.net> 2010-04-02 13:19:00 +07:00			`obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_L2TP_IP)) += l2tp_ip.o`
l2tp: Add netlink control API for L2TP In L2TPv3, we need to create/delete/modify/query L2TP tunnel and session contexts. The number of parameters is significant. So let's use netlink. Userspace uses this API to control L2TP tunnel/session contexts in the kernel. The previous pppol2tp driver was managed using [gs]etsockopt(). This API is retained for backwards compatibility. Unlike L2TPv2 which carries only PPP frames, L2TPv3 can carry raw ethernet frames or other frame types and these do not always have an associated socket family. Therefore, we need a way to use L2TP sessions that doesn't require a socket type for each supported frame type. Hence netlink is used. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2010-04-02 13:19:10 +07:00			`obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_L2TP_V3)) += l2tp_netlink.o`
l2tp: Add L2TP ethernet pseudowire support This driver presents a regular net_device for each L2TP ethernet pseudowire instance. These interfaces are named l2tpethN by default, though userspace can specify an alternative name when the L2TP session is created, if preferred. When the pseudowire is established, regular Linux networking utilities may be used to configure the interface, i.e. give it IP address info or add it to a bridge. Any data passed over the interface is carried over an L2TP tunnel. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2010-04-02 13:19:26 +07:00			`obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_L2TP_ETH)) += l2tp_eth.o`
l2tp: Add debugfs files for dumping l2tp debug info The existing pppol2tp driver exports debug info to /proc/net/pppol2tp. Rather than adding info to that file for the new functionality added in this patch series, we add new files in debugfs, leaving the old /proc file for backwards compatibility (L2TPv2 only). Currently only one file is provided: l2tp/tunnels, which lists internal debug info for all l2tp tunnels and sessions. More files may be added later. The info is for debug and problem analysis only - userspace apps should use netlink to obtain status about l2tp tunnels and sessions. Although debugfs does not support net namespaces, the tunnels and sessions dumped in l2tp/tunnels are only those in the net namespace of the process reading the file. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2010-04-02 13:19:33 +07:00			`obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_L2TP_DEBUGFS)) += l2tp_debugfs.o`
l2tp: introduce L2TPv3 IP encapsulation support for IPv6 L2TPv3 defines an IP encapsulation packet format where data is carried directly over IP (no UDP). The kernel already has support for L2TP IP encapsulation over IPv4 (l2tp_ip). This patch introduces support for L2TP IP encapsulation over IPv6. The implementation is derived from ipv6/raw and ipv4/l2tp_ip. Signed-off-by: Chris Elston <celston@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2012-04-30 04:48:54 +07:00			`ifneq ($(CONFIG_IPV6),)`
			`obj-$(subst y,$(CONFIG_L2TP),$(CONFIG_L2TP_IP)) += l2tp_ip6.o`
			`endif`