License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
perf trace: Beautify statx syscall 'flag' and 'mask' arguments
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-15 02:19:30 +07:00
|
|
|
#ifndef _PERF_TRACE_BEAUTY_H
|
|
|
|
#define _PERF_TRACE_BEAUTY_H
|
|
|
|
|
2017-07-17 20:31:42 +07:00
|
|
|
#include <linux/kernel.h>
|
perf trace: Beautify statx syscall 'flag' and 'mask' arguments
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-15 02:19:30 +07:00
|
|
|
#include <linux/types.h>
|
2017-10-31 21:30:09 +07:00
|
|
|
#include <sys/types.h>
|
2019-10-10 02:11:36 +07:00
|
|
|
#include <stdbool.h>
|
perf trace: Beautify statx syscall 'flag' and 'mask' arguments
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-15 02:19:30 +07:00
|
|
|
|
2017-07-17 20:31:42 +07:00
|
|
|
struct strarray {
|
2019-10-09 21:22:43 +07:00
|
|
|
u64 offset;
|
2017-07-17 20:31:42 +07:00
|
|
|
int nr_entries;
|
2018-12-15 01:08:40 +07:00
|
|
|
const char *prefix;
|
2017-07-17 20:31:42 +07:00
|
|
|
const char **entries;
|
|
|
|
};
|
|
|
|
|
2018-12-15 01:08:40 +07:00
|
|
|
#define DEFINE_STRARRAY(array, _prefix) struct strarray strarray__##array = { \
|
2017-07-17 20:31:42 +07:00
|
|
|
.nr_entries = ARRAY_SIZE(array), \
|
|
|
|
.entries = array, \
|
2018-12-15 01:08:40 +07:00
|
|
|
.prefix = _prefix, \
|
2017-07-17 20:31:42 +07:00
|
|
|
}
|
|
|
|
|
2018-12-15 01:08:40 +07:00
|
|
|
#define DEFINE_STRARRAY_OFFSET(array, _prefix, off) struct strarray strarray__##array = { \
|
2017-07-17 20:31:42 +07:00
|
|
|
.offset = off, \
|
|
|
|
.nr_entries = ARRAY_SIZE(array), \
|
|
|
|
.entries = array, \
|
2018-12-15 01:08:40 +07:00
|
|
|
.prefix = _prefix, \
|
2017-07-17 20:31:42 +07:00
|
|
|
}
|
|
|
|
|
perf trace: Allow asking for not suppressing common string prefixes
So far we've been suppressing common stuff such as "MAP_" in the mmap
flags, showing "SHARED" instead of "MAP_SHARED", allow for those
prefixes (and a few suffixes) to be shown:
# trace -e *map,open*,*seek sleep 1
openat("/etc/ld.so.cache", CLOEXEC) = 3
mmap(0, 109093, READ, PRIVATE, 3, 0) = 0x7ff61c695000
openat("/lib64/libc.so.6", CLOEXEC) = 3
lseek(3, 792, SET) = 792
mmap(0, 8192, READ|WRITE, PRIVATE|ANONYMOUS) = 0x7ff61c693000
lseek(3, 792, SET) = 792
lseek(3, 864, SET) = 864
mmap(0, 1857568, READ, PRIVATE|DENYWRITE, 3, 0) = 0x7ff61c4cd000
mmap(0x7ff61c4ef000, 1363968, EXEC|READ, PRIVATE|FIXED|DENYWRITE, 3, 139264) = 0x7ff61c4ef000
mmap(0x7ff61c63c000, 311296, READ, PRIVATE|FIXED|DENYWRITE, 3, 1503232) = 0x7ff61c63c000
mmap(0x7ff61c689000, 24576, READ|WRITE, PRIVATE|FIXED|DENYWRITE, 3, 1814528) = 0x7ff61c689000
mmap(0x7ff61c68f000, 14368, READ|WRITE, PRIVATE|FIXED|ANONYMOUS) = 0x7ff61c68f000
munmap(0x7ff61c695000, 109093) = 0
openat("/usr/lib/locale/locale-archive", CLOEXEC) = 3
mmap(0, 217749968, READ, PRIVATE, 3, 0) = 0x7ff60f523000
#
# vim ~/.perfconfig
#
# perf config
llvm.dump-obj=true
trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
trace.show_zeros=yes
trace.show_duration=no
trace.no_inherit=yes
trace.show_timestamp=no
trace.show_arg_names=no
trace.args_alignment=0
trace.string_quote="
trace.show_prefix=yes
#
#
# trace -e *map,open*,*seek sleep 1
openat(AT_FDCWD, "/etc/ld.so.cache", O_CLOEXEC) = 3
mmap(0, 109093, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7ebbe59000
openat(AT_FDCWD, "/lib64/libc.so.6", O_CLOEXEC) = 3
lseek(3, 792, SEEK_SET) = 792
mmap(0, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f7ebbe57000
lseek(3, 792, SEEK_SET) = 792
lseek(3, 864, SEEK_SET) = 864
mmap(0, 1857568, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f7ebbc91000
mmap(0x7f7ebbcb3000, 1363968, PROT_EXEC|PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 139264) = 0x7f7ebbcb3000
mmap(0x7f7ebbe00000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1503232) = 0x7f7ebbe00000
mmap(0x7f7ebbe4d000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1814528) = 0x7f7ebbe4d000
mmap(0x7f7ebbe53000, 14368, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f7ebbe53000
munmap(0x7f7ebbe59000, 109093) = 0
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_CLOEXEC) = 3
mmap(0, 217749968, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7eaece7000
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mtn1i4rjowjl72trtnbmvjd4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-15 03:06:47 +07:00
|
|
|
size_t strarray__scnprintf(struct strarray *sa, char *bf, size_t size, const char *intfmt, bool show_prefix, int val);
|
2019-10-16 02:01:42 +07:00
|
|
|
size_t strarray__scnprintf_suffix(struct strarray *sa, char *bf, size_t size, const char *intfmt, bool show_suffix, int val);
|
perf trace: Allow asking for not suppressing common string prefixes
So far we've been suppressing common stuff such as "MAP_" in the mmap
flags, showing "SHARED" instead of "MAP_SHARED", allow for those
prefixes (and a few suffixes) to be shown:
# trace -e *map,open*,*seek sleep 1
openat("/etc/ld.so.cache", CLOEXEC) = 3
mmap(0, 109093, READ, PRIVATE, 3, 0) = 0x7ff61c695000
openat("/lib64/libc.so.6", CLOEXEC) = 3
lseek(3, 792, SET) = 792
mmap(0, 8192, READ|WRITE, PRIVATE|ANONYMOUS) = 0x7ff61c693000
lseek(3, 792, SET) = 792
lseek(3, 864, SET) = 864
mmap(0, 1857568, READ, PRIVATE|DENYWRITE, 3, 0) = 0x7ff61c4cd000
mmap(0x7ff61c4ef000, 1363968, EXEC|READ, PRIVATE|FIXED|DENYWRITE, 3, 139264) = 0x7ff61c4ef000
mmap(0x7ff61c63c000, 311296, READ, PRIVATE|FIXED|DENYWRITE, 3, 1503232) = 0x7ff61c63c000
mmap(0x7ff61c689000, 24576, READ|WRITE, PRIVATE|FIXED|DENYWRITE, 3, 1814528) = 0x7ff61c689000
mmap(0x7ff61c68f000, 14368, READ|WRITE, PRIVATE|FIXED|ANONYMOUS) = 0x7ff61c68f000
munmap(0x7ff61c695000, 109093) = 0
openat("/usr/lib/locale/locale-archive", CLOEXEC) = 3
mmap(0, 217749968, READ, PRIVATE, 3, 0) = 0x7ff60f523000
#
# vim ~/.perfconfig
#
# perf config
llvm.dump-obj=true
trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
trace.show_zeros=yes
trace.show_duration=no
trace.no_inherit=yes
trace.show_timestamp=no
trace.show_arg_names=no
trace.args_alignment=0
trace.string_quote="
trace.show_prefix=yes
#
#
# trace -e *map,open*,*seek sleep 1
openat(AT_FDCWD, "/etc/ld.so.cache", O_CLOEXEC) = 3
mmap(0, 109093, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7ebbe59000
openat(AT_FDCWD, "/lib64/libc.so.6", O_CLOEXEC) = 3
lseek(3, 792, SEEK_SET) = 792
mmap(0, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f7ebbe57000
lseek(3, 792, SEEK_SET) = 792
lseek(3, 864, SEEK_SET) = 864
mmap(0, 1857568, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f7ebbc91000
mmap(0x7f7ebbcb3000, 1363968, PROT_EXEC|PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 139264) = 0x7f7ebbcb3000
mmap(0x7f7ebbe00000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1503232) = 0x7f7ebbe00000
mmap(0x7f7ebbe4d000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1814528) = 0x7f7ebbe4d000
mmap(0x7f7ebbe53000, 14368, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f7ebbe53000
munmap(0x7f7ebbe59000, 109093) = 0
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_CLOEXEC) = 3
mmap(0, 217749968, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7eaece7000
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mtn1i4rjowjl72trtnbmvjd4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-15 03:06:47 +07:00
|
|
|
size_t strarray__scnprintf_flags(struct strarray *sa, char *bf, size_t size, bool show_prefix, unsigned long flags);
|
2017-07-17 20:31:42 +07:00
|
|
|
|
2019-10-10 02:11:36 +07:00
|
|
|
bool strarray__strtoul(struct strarray *sa, char *bf, size_t size, u64 *ret);
|
2019-10-20 01:17:30 +07:00
|
|
|
bool strarray__strtoul_flags(struct strarray *sa, char *bf, size_t size, u64 *ret);
|
2019-10-10 02:11:36 +07:00
|
|
|
|
perf trace: Beautify statx syscall 'flag' and 'mask' arguments
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-15 02:19:30 +07:00
|
|
|
struct trace;
|
|
|
|
struct thread;
|
|
|
|
|
2018-12-28 02:19:33 +07:00
|
|
|
struct file {
|
|
|
|
char *pathname;
|
|
|
|
int dev_maj;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct file *thread__files_entry(struct thread *thread, int fd);
|
|
|
|
|
2018-12-18 20:25:28 +07:00
|
|
|
struct strarrays {
|
|
|
|
int nr_entries;
|
|
|
|
struct strarray **entries;
|
|
|
|
};
|
|
|
|
|
|
|
|
#define DEFINE_STRARRAYS(array) struct strarrays strarrays__##array = { \
|
|
|
|
.nr_entries = ARRAY_SIZE(array), \
|
|
|
|
.entries = array, \
|
|
|
|
}
|
|
|
|
|
|
|
|
size_t strarrays__scnprintf(struct strarrays *sas, char *bf, size_t size, const char *intfmt, bool show_prefix, int val);
|
|
|
|
|
2019-10-10 02:11:36 +07:00
|
|
|
bool strarrays__strtoul(struct strarrays *sas, char *bf, size_t size, u64 *ret);
|
|
|
|
|
2017-10-31 21:30:09 +07:00
|
|
|
size_t pid__scnprintf_fd(struct trace *trace, pid_t pid, int fd, char *bf, size_t size);
|
|
|
|
|
perf trace augmented_syscalls: Augment connect's 'sockaddr' arg
As the first example of augmenting something other than a 'filename',
augment the 'struct sockaddr' argument for the 'connect' syscall:
# perf trace -e tools/perf/examples/bpf/augmented_syscalls.c ssh -6 fedorapeople.org
0.000 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
0.042 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
1.329 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
1.362 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
1.458 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
1.478 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
1.683 ssh/29669 connect(fd: 3<socket:[125942]>, uservaddr: { .family: INET, port: 53, addr: 192.168.43.1 }, addrlen: 16)
4.710 ssh/29669 connect(fd: 3<socket:[125942]>, uservaddr: { .family: INET6, port: 22, addr: 2610:28:3090:3001:5054:ff:fea7:9474 }, addrlen: 28)
root@fedorapeople.org: Permission denied (publickey).
#
This is still just augmenting the syscalls:sys_enter_connect part, later
we'll wire this up to augment the enter+exit combo, like in the
tradicional 'perf trace' and 'strace' outputs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-s7l541cbiqb22ifio6z7dpf6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-29 02:24:44 +07:00
|
|
|
extern struct strarray strarray__socket_families;
|
|
|
|
|
2018-08-21 03:58:17 +07:00
|
|
|
/**
|
|
|
|
* augmented_arg: extra payload for syscall pointer arguments
|
|
|
|
|
|
|
|
* If perf_sample->raw_size is more than what a syscall sys_enter_FOO puts,
|
|
|
|
* then its the arguments contents, so that we can show more than just a
|
|
|
|
* pointer. This will be done initially with eBPF, the start of that is at the
|
|
|
|
* tools/perf/examples/bpf/augmented_syscalls.c example for the openat, but
|
|
|
|
* will eventually be done automagically caching the running kernel tracefs
|
|
|
|
* events data into an eBPF C script, that then gets compiled and its .o file
|
|
|
|
* cached for subsequent use. For char pointers like the ones for 'open' like
|
|
|
|
* syscalls its easy, for the rest we should use DWARF or better, BTF, much
|
|
|
|
* more compact.
|
|
|
|
*
|
|
|
|
* @size: 8 if all we need is an integer, otherwise all of the augmented arg.
|
|
|
|
* @int_arg: will be used for integer like pointer contents, like 'accept's 'upeer_addrlen'
|
|
|
|
* @value: u64 aligned, for structs, pathnames
|
|
|
|
*/
|
|
|
|
struct augmented_arg {
|
|
|
|
int size;
|
|
|
|
int int_arg;
|
|
|
|
u64 value[];
|
|
|
|
};
|
|
|
|
|
2019-10-05 00:52:30 +07:00
|
|
|
struct syscall_arg_fmt;
|
|
|
|
|
2017-07-14 20:13:56 +07:00
|
|
|
/**
|
|
|
|
* @val: value of syscall argument being formatted
|
2019-10-15 18:26:47 +07:00
|
|
|
* @len: for tracepoint dynamic arrays, if fmt->nr_entries == 0, then its not a fixed array, look at arg->len
|
2017-07-14 20:13:56 +07:00
|
|
|
* @args: All the args, use syscall_args__val(arg, nth) to access one
|
2018-08-21 03:58:17 +07:00
|
|
|
* @augmented_args: Extra data that can be collected, for instance, with eBPF for expanding the pathname for open, etc
|
|
|
|
* @augmented_args_size: augmented_args total payload size
|
2017-07-14 20:13:56 +07:00
|
|
|
* @thread: tid state (maps, pid, tid, etc)
|
|
|
|
* @trace: 'perf trace' internals: all threads, etc
|
|
|
|
* @parm: private area, may be an strarray, for instance
|
|
|
|
* @idx: syscall arg idx (is this the first?)
|
|
|
|
* @mask: a syscall arg may mask another arg, see syscall_arg__scnprintf_futex_op
|
perf trace: Allow asking for not suppressing common string prefixes
So far we've been suppressing common stuff such as "MAP_" in the mmap
flags, showing "SHARED" instead of "MAP_SHARED", allow for those
prefixes (and a few suffixes) to be shown:
# trace -e *map,open*,*seek sleep 1
openat("/etc/ld.so.cache", CLOEXEC) = 3
mmap(0, 109093, READ, PRIVATE, 3, 0) = 0x7ff61c695000
openat("/lib64/libc.so.6", CLOEXEC) = 3
lseek(3, 792, SET) = 792
mmap(0, 8192, READ|WRITE, PRIVATE|ANONYMOUS) = 0x7ff61c693000
lseek(3, 792, SET) = 792
lseek(3, 864, SET) = 864
mmap(0, 1857568, READ, PRIVATE|DENYWRITE, 3, 0) = 0x7ff61c4cd000
mmap(0x7ff61c4ef000, 1363968, EXEC|READ, PRIVATE|FIXED|DENYWRITE, 3, 139264) = 0x7ff61c4ef000
mmap(0x7ff61c63c000, 311296, READ, PRIVATE|FIXED|DENYWRITE, 3, 1503232) = 0x7ff61c63c000
mmap(0x7ff61c689000, 24576, READ|WRITE, PRIVATE|FIXED|DENYWRITE, 3, 1814528) = 0x7ff61c689000
mmap(0x7ff61c68f000, 14368, READ|WRITE, PRIVATE|FIXED|ANONYMOUS) = 0x7ff61c68f000
munmap(0x7ff61c695000, 109093) = 0
openat("/usr/lib/locale/locale-archive", CLOEXEC) = 3
mmap(0, 217749968, READ, PRIVATE, 3, 0) = 0x7ff60f523000
#
# vim ~/.perfconfig
#
# perf config
llvm.dump-obj=true
trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
trace.show_zeros=yes
trace.show_duration=no
trace.no_inherit=yes
trace.show_timestamp=no
trace.show_arg_names=no
trace.args_alignment=0
trace.string_quote="
trace.show_prefix=yes
#
#
# trace -e *map,open*,*seek sleep 1
openat(AT_FDCWD, "/etc/ld.so.cache", O_CLOEXEC) = 3
mmap(0, 109093, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7ebbe59000
openat(AT_FDCWD, "/lib64/libc.so.6", O_CLOEXEC) = 3
lseek(3, 792, SEEK_SET) = 792
mmap(0, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f7ebbe57000
lseek(3, 792, SEEK_SET) = 792
lseek(3, 864, SEEK_SET) = 864
mmap(0, 1857568, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f7ebbc91000
mmap(0x7f7ebbcb3000, 1363968, PROT_EXEC|PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 139264) = 0x7f7ebbcb3000
mmap(0x7f7ebbe00000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1503232) = 0x7f7ebbe00000
mmap(0x7f7ebbe4d000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1814528) = 0x7f7ebbe4d000
mmap(0x7f7ebbe53000, 14368, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f7ebbe53000
munmap(0x7f7ebbe59000, 109093) = 0
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_CLOEXEC) = 3
mmap(0, 217749968, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7eaece7000
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mtn1i4rjowjl72trtnbmvjd4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-15 03:06:47 +07:00
|
|
|
* @show_string_prefix: When there is a common prefix in a string table, show it or not
|
2017-07-14 20:13:56 +07:00
|
|
|
*/
|
|
|
|
|
perf trace: Beautify statx syscall 'flag' and 'mask' arguments
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-15 02:19:30 +07:00
|
|
|
struct syscall_arg {
|
|
|
|
unsigned long val;
|
2017-07-14 20:13:56 +07:00
|
|
|
unsigned char *args;
|
2019-10-05 00:52:30 +07:00
|
|
|
struct syscall_arg_fmt *fmt;
|
2018-08-21 03:58:17 +07:00
|
|
|
struct {
|
|
|
|
struct augmented_arg *args;
|
|
|
|
int size;
|
|
|
|
} augmented;
|
perf trace: Beautify statx syscall 'flag' and 'mask' arguments
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-15 02:19:30 +07:00
|
|
|
struct thread *thread;
|
|
|
|
struct trace *trace;
|
|
|
|
void *parm;
|
2019-10-15 18:26:47 +07:00
|
|
|
u16 len;
|
perf trace: Beautify statx syscall 'flag' and 'mask' arguments
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-15 02:19:30 +07:00
|
|
|
u8 idx;
|
|
|
|
u8 mask;
|
perf trace: Allow asking for not suppressing common string prefixes
So far we've been suppressing common stuff such as "MAP_" in the mmap
flags, showing "SHARED" instead of "MAP_SHARED", allow for those
prefixes (and a few suffixes) to be shown:
# trace -e *map,open*,*seek sleep 1
openat("/etc/ld.so.cache", CLOEXEC) = 3
mmap(0, 109093, READ, PRIVATE, 3, 0) = 0x7ff61c695000
openat("/lib64/libc.so.6", CLOEXEC) = 3
lseek(3, 792, SET) = 792
mmap(0, 8192, READ|WRITE, PRIVATE|ANONYMOUS) = 0x7ff61c693000
lseek(3, 792, SET) = 792
lseek(3, 864, SET) = 864
mmap(0, 1857568, READ, PRIVATE|DENYWRITE, 3, 0) = 0x7ff61c4cd000
mmap(0x7ff61c4ef000, 1363968, EXEC|READ, PRIVATE|FIXED|DENYWRITE, 3, 139264) = 0x7ff61c4ef000
mmap(0x7ff61c63c000, 311296, READ, PRIVATE|FIXED|DENYWRITE, 3, 1503232) = 0x7ff61c63c000
mmap(0x7ff61c689000, 24576, READ|WRITE, PRIVATE|FIXED|DENYWRITE, 3, 1814528) = 0x7ff61c689000
mmap(0x7ff61c68f000, 14368, READ|WRITE, PRIVATE|FIXED|ANONYMOUS) = 0x7ff61c68f000
munmap(0x7ff61c695000, 109093) = 0
openat("/usr/lib/locale/locale-archive", CLOEXEC) = 3
mmap(0, 217749968, READ, PRIVATE, 3, 0) = 0x7ff60f523000
#
# vim ~/.perfconfig
#
# perf config
llvm.dump-obj=true
trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
trace.show_zeros=yes
trace.show_duration=no
trace.no_inherit=yes
trace.show_timestamp=no
trace.show_arg_names=no
trace.args_alignment=0
trace.string_quote="
trace.show_prefix=yes
#
#
# trace -e *map,open*,*seek sleep 1
openat(AT_FDCWD, "/etc/ld.so.cache", O_CLOEXEC) = 3
mmap(0, 109093, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7ebbe59000
openat(AT_FDCWD, "/lib64/libc.so.6", O_CLOEXEC) = 3
lseek(3, 792, SEEK_SET) = 792
mmap(0, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f7ebbe57000
lseek(3, 792, SEEK_SET) = 792
lseek(3, 864, SEEK_SET) = 864
mmap(0, 1857568, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f7ebbc91000
mmap(0x7f7ebbcb3000, 1363968, PROT_EXEC|PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 139264) = 0x7f7ebbcb3000
mmap(0x7f7ebbe00000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1503232) = 0x7f7ebbe00000
mmap(0x7f7ebbe4d000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1814528) = 0x7f7ebbe4d000
mmap(0x7f7ebbe53000, 14368, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f7ebbe53000
munmap(0x7f7ebbe59000, 109093) = 0
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_CLOEXEC) = 3
mmap(0, 217749968, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7eaece7000
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mtn1i4rjowjl72trtnbmvjd4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-15 03:06:47 +07:00
|
|
|
bool show_string_prefix;
|
perf trace: Beautify statx syscall 'flag' and 'mask' arguments
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-15 02:19:30 +07:00
|
|
|
};
|
|
|
|
|
2017-07-14 20:13:56 +07:00
|
|
|
unsigned long syscall_arg__val(struct syscall_arg *arg, u8 idx);
|
|
|
|
|
2019-05-24 04:05:03 +07:00
|
|
|
size_t syscall_arg__scnprintf_strarray_flags(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_STRARRAY_FLAGS syscall_arg__scnprintf_strarray_flags
|
|
|
|
|
2019-10-18 04:33:00 +07:00
|
|
|
bool syscall_arg__strtoul_strarray(char *bf, size_t size, struct syscall_arg *arg, u64 *ret);
|
|
|
|
#define STUL_STRARRAY syscall_arg__strtoul_strarray
|
|
|
|
|
2019-10-20 01:26:50 +07:00
|
|
|
bool syscall_arg__strtoul_strarray_flags(char *bf, size_t size, struct syscall_arg *arg, u64 *ret);
|
|
|
|
#define STUL_STRARRAY_FLAGS syscall_arg__strtoul_strarray_flags
|
|
|
|
|
2019-10-19 01:41:07 +07:00
|
|
|
bool syscall_arg__strtoul_strarrays(char *bf, size_t size, struct syscall_arg *arg, u64 *ret);
|
|
|
|
#define STUL_STRARRAYS syscall_arg__strtoul_strarrays
|
|
|
|
|
2019-10-16 02:03:25 +07:00
|
|
|
size_t syscall_arg__scnprintf_x86_irq_vectors(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_X86_IRQ_VECTORS syscall_arg__scnprintf_x86_irq_vectors
|
|
|
|
|
|
|
|
bool syscall_arg__strtoul_x86_irq_vectors(char *bf, size_t size, struct syscall_arg *arg, u64 *ret);
|
|
|
|
#define STUL_X86_IRQ_VECTORS syscall_arg__strtoul_x86_irq_vectors
|
|
|
|
|
2019-10-08 01:52:19 +07:00
|
|
|
size_t syscall_arg__scnprintf_x86_MSR(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_X86_MSR syscall_arg__scnprintf_x86_MSR
|
|
|
|
|
perf beauty: Introduce strtoul() for x86 MSRs
Continuing from the previous cset comment, now that filter expression
works:
# perf trace -e msr:* --filter="msr!=FS_BASE && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL" --filter-pids 3750
0.000 Timer/5033 msr:write_msr(msr: SYSCALL_MASK, val: 292608)
0.009 Timer/5033 msr:write_msr(msr: LSTAR, val: -1398800368)
0.010 Timer/5033 msr:write_msr(msr: TSC_AUX, val: 4)
0.050 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
45.661 gnome-terminal/12595 msr:write_msr(msr: SYSCALL_MASK, val: 292608)
45.672 gnome-terminal/12595 msr:write_msr(msr: LSTAR, val: -1398800368)
45.675 gnome-terminal/12595 msr:write_msr(msr: TSC_AUX, val: 3)
54.852 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
130.508 Timer/4050 msr:write_msr(msr: SYSCALL_MASK, val: 292608)
130.527 Timer/4050 msr:write_msr(msr: LSTAR, val: -1398800368)
130.531 Timer/4050 msr:write_msr(msr: TSC_AUX, val: 3)
140.924 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
164.738 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
603.578 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
620.809 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
690.115 JS Watchdog/4259 msr:write_msr(msr: SYSCALL_MASK, val: 292608)
690.136 JS Watchdog/4259 msr:write_msr(msr: LSTAR, val: -1398800368)
690.141 JS Watchdog/4259 msr:write_msr(msr: TSC_AUX, val: 3)
690.186 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
759.016 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
^C[root@quaco ~]#
Or look at the first 3 write_msr events for that IA32_TSC_DEADLINE to learn why
it happens so often:
# perf trace --max-events=3 --max-stack=8 -e msr:* --filter="msr==IA32_TSC_DEADLINE" --filter-pids 3750
0.000 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 19296732550862)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
lapic_next_deadline ([kernel.kallsyms])
clockevents_program_event ([kernel.kallsyms])
hrtimer_interrupt ([kernel.kallsyms])
smp_apic_timer_interrupt ([kernel.kallsyms])
apic_timer_interrupt ([kernel.kallsyms])
cpuidle_enter_state ([kernel.kallsyms])
32.646 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 19296800134158)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
lapic_next_deadline ([kernel.kallsyms])
clockevents_program_event ([kernel.kallsyms])
hrtimer_start_range_ns ([kernel.kallsyms])
tick_nohz_restart_sched_tick ([kernel.kallsyms])
tick_nohz_idle_exit ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
32.802 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 19297507436922)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
lapic_next_deadline ([kernel.kallsyms])
clockevents_program_event ([kernel.kallsyms])
hrtimer_try_to_cancel ([kernel.kallsyms])
hrtimer_cancel ([kernel.kallsyms])
tick_nohz_restart_sched_tick ([kernel.kallsyms])
tick_nohz_idle_exit ([kernel.kallsyms])
#
And if some of the strings can't be found:
# trace -e msr:* --filter="msr!=SPECULATIVE_EXECUTION_PROBLEMS_SOLUTION && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL" --filter-pids 3750
"SPECULATIVE_EXECUTION_PROBLEMS_SOLUTION" not found for "msr" in "msr:read_msr", can't set filter "(msr!=SPECULATIVE_EXECUTION_PROBLEMS_SOLUTION && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL) && (common_pid != 28131 && common_pid != 3750)"
#
Next step is to automatically wire up the pre-existing strarrays, which there
are quite a few.
The strtoul() methods will be further enhanced to allow for looking at other
arguments in a syscall/tracepoint, just like going from integer to string
(scnprintf methods), so that those "val" lines for the msr tracepoints can be
properly formatted or even resolved into some string.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-4qaai5iqjgefd11k4ddm7qg8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-10 02:25:02 +07:00
|
|
|
bool syscall_arg__strtoul_x86_MSR(char *bf, size_t size, struct syscall_arg *arg, u64 *ret);
|
|
|
|
#define STUL_X86_MSR syscall_arg__strtoul_x86_MSR
|
|
|
|
|
2017-07-14 19:38:38 +07:00
|
|
|
size_t syscall_arg__scnprintf_strarrays(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_STRARRAYS syscall_arg__scnprintf_strarrays
|
|
|
|
|
2017-07-15 01:21:40 +07:00
|
|
|
size_t syscall_arg__scnprintf_fd(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_FD syscall_arg__scnprintf_fd
|
|
|
|
|
2017-07-14 20:19:18 +07:00
|
|
|
size_t syscall_arg__scnprintf_hex(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_HEX syscall_arg__scnprintf_hex
|
|
|
|
|
2018-12-17 22:21:09 +07:00
|
|
|
size_t syscall_arg__scnprintf_ptr(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_PTR syscall_arg__scnprintf_ptr
|
|
|
|
|
2017-07-14 20:19:18 +07:00
|
|
|
size_t syscall_arg__scnprintf_int(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_INT syscall_arg__scnprintf_int
|
|
|
|
|
2017-07-14 20:34:16 +07:00
|
|
|
size_t syscall_arg__scnprintf_long(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_LONG syscall_arg__scnprintf_long
|
|
|
|
|
2017-07-15 01:21:40 +07:00
|
|
|
size_t syscall_arg__scnprintf_pid(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_PID syscall_arg__scnprintf_pid
|
|
|
|
|
perf trace beauty clone: Beautify syscall arguments
Now, syswide tracing, selected entries:
# trace -e clone
24417.203 ( 0.158 ms): bash/11323 clone(flags: CHILD_CLEARTID|CHILD_SETTID|0x11, child_stack: 0, parent_tidptr: 0, child_tidptr: 0x7f0778e5c9d0, tls: 0x7f0778e5c700) = 11325 (bash)
? ( ? ): bash/11325 ... [continued]: clone()) = 0
24419.355 ( 0.093 ms): bash/10586 clone(flags: CHILD_CLEARTID|CHILD_SETTID|0x11, child_stack: 0, parent_tidptr: 0, child_tidptr: 0x7f0778e5c9d0, tls: 0x7f0778e5c700) = 11326 (bash)
? ( ? ): bash/11326 ... [continued]: clone()) = 0
24419.744 ( 0.102 ms): bash/11326 clone(flags: CHILD_CLEARTID|CHILD_SETTID|0x11, child_stack: 0, parent_tidptr: 0, child_tidptr: 0x7f0778e5c9d0, tls: 0x7f0778e5c700) = 11327 (bash)
? ( ? ): bash/11327 ... [continued]: clone()) = 0
24420.138 ( 0.105 ms): bash/11327 clone(flags: CHILD_CLEARTID|CHILD_SETTID|0x11, child_stack: 0, parent_tidptr: 0, child_tidptr: 0x7f0778e5c9d0, tls: 0x7f0778e5c700) = 11328 (bash)
? ( ? ): bash/11328 ... [continued]: clone()) = 0
35747.722 ( 0.044 ms): gpg-agent/18087 clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7ff0755f6ff0, parent_tidptr: 0x7ff0755f79d0, child_tidptr: 0x7ff0755f79d0, tls: 0x7ff0755f7700) = 11329 (gpg-agent)
? ( ? ): gpg-agent/11329 ... [continued]: clone()) = 0
35748.359 ( 0.022 ms): gpg-agent/18087 clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7ff075df7ff0, parent_tidptr: 0x7ff075df89d0, child_tidptr: 0x7ff075df89d0, tls: 0x7ff075df8700) = 11330 (gpg-agent)
? ( ? ): gpg-agent/11330 ... [continued]: clone()) = 0
35781.422 ( 0.452 ms): NetworkManager/1112 clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7f2f1fffedb0, parent_tidptr: 0x7f2f1ffff9d0, child_tidptr: 0x7f2f1ffff9d0, tls: 0x7f2f1ffff700) = 11331 (NetworkManager)
? ( ? ): NetworkManager/11331 ... [continued]: clone()) = 0
Need to improve the formatting of the second return, to the child, this
cset only focused on the argument formatting.
If we trace just one pid:
# trace -e clone -p 19863
0.349 ( 0.025 ms): Chrome_IOThrea/19863 clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7ffb84eaac70, parent_tidptr: 0x7ffb84eab9d0, child_tidptr: 0x7ffb84eab9d0, tls: 0x7ffb84eab700) = 11637 (Chrome_IOThread)
0.392 ( 0.013 ms): Chrome_IOThrea/19863 clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7ffb664b8c70, parent_tidptr: 0x7ffb664b99d0, child_tidptr: 0x7ffb664b99d0, tls: 0x7ffb664b9700) = 11638 (Chrome_IOThread)
0.573 ( 0.015 ms): Chrome_IOThrea/19863 clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7ffb6046cc70, parent_tidptr: 0x7ffb6046d9d0, child_tidptr: 0x7ffb6046d9d0, tls: 0x7ffb6046d700) = 11639 (Chrome_IOThread)
0.617 ( 0.014 ms): Chrome_IOThrea/19863 clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7ffb730dcc70, parent_tidptr: 0x7ffb730dd9d0, child_tidptr: 0x7ffb730dd9d0, tls: 0x7ffb730dd700) = 11640 (Chrome_IOThread)
4.350 ( 0.065 ms): Chrome_IOThrea/19863 clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7ffb720d9c70, parent_tidptr: 0x7ffb720da9d0, child_tidptr: 0x7ffb720da9d0, tls: 0x7ffb720da700) = 11642 (Chrome_IOThread)
5.642 ( 0.079 ms): Chrome_IOThrea/19863 clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7ffb718d8c70, parent_tidptr: 0x7ffb718d99d0, child_tidptr: 0x7ffb718d99d0, tls: 0x7ffb718d9700) = 11643 (Chrome_IOThread)
^C#
We'll also have to fix the argument ordering in different arches,
probably having multiple syscall_fmt entries with each possible order
and then use perf_evsel__env_arch() (if dealing with a perf.data file)
or the current system info, for live sessions.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-am068uyubgj83snepolwhbfe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-20 02:15:17 +07:00
|
|
|
size_t syscall_arg__scnprintf_clone_flags(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_CLONE_FLAGS syscall_arg__scnprintf_clone_flags
|
|
|
|
|
2017-07-14 19:44:50 +07:00
|
|
|
size_t syscall_arg__scnprintf_fcntl_cmd(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_FCNTL_CMD syscall_arg__scnprintf_fcntl_cmd
|
|
|
|
|
2017-07-14 21:05:40 +07:00
|
|
|
size_t syscall_arg__scnprintf_fcntl_arg(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_FCNTL_ARG syscall_arg__scnprintf_fcntl_arg
|
|
|
|
|
2018-01-23 02:50:16 +07:00
|
|
|
size_t syscall_arg__scnprintf_flock(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_FLOCK syscall_arg__scnprintf_flock
|
|
|
|
|
perf trace: Beautify 'fsmount' arguments
Use existing beautifiers for the first arg, fd, assigned using the
heuristic that looks for syscall arg names and associates SCA_FD with
'fd' named argumes, and wire up the recently introduced fsmount
attr_flags table generator.
Now it should be possible to just use:
perf trace -e fsmount
As root and see all fsmount syscalls with its args beautified.
# cat sys_fsmount.c
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#define __NR_fsmount 432
#define MOUNT_ATTR_RDONLY 0x00000001 /* Mount read-only */
#define MOUNT_ATTR_NOSUID 0x00000002 /* Ignore suid and sgid bits */
#define MOUNT_ATTR_NODEV 0x00000004 /* Disallow access to device special files */
#define MOUNT_ATTR_NOEXEC 0x00000008 /* Disallow program execution */
#define MOUNT_ATTR__ATIME 0x00000070 /* Setting on how atime should be updated */
#define MOUNT_ATTR_RELATIME 0x00000000 /* - Update atime relative to mtime/ctime. */
#define MOUNT_ATTR_NOATIME 0x00000010 /* - Do not update access times. */
#define MOUNT_ATTR_STRICTATIME 0x00000020 /* - Always perform atime updates */
#define MOUNT_ATTR_NODIRATIME 0x00000080 /* Do not update directory access times */
static inline int sys_fsmount(int fs_fd, int flags, int attr_flags)
{
syscall(__NR_fsmount, fs_fd, flags, attr_flags);
}
int main(int argc, char *argv[])
{
int attr_flags = 0, fs_fd = 0;
sys_fsmount(fs_fd++, 0, attr_flags);
attr_flags |= MOUNT_ATTR_RDONLY;
sys_fsmount(fs_fd++, 1, attr_flags);
attr_flags |= MOUNT_ATTR_NOSUID;
sys_fsmount(fs_fd++, 0, attr_flags);
attr_flags |= MOUNT_ATTR_NODEV;
sys_fsmount(fs_fd++, 1, attr_flags);
attr_flags |= MOUNT_ATTR_NOEXEC;
sys_fsmount(fs_fd++, 0, attr_flags);
attr_flags |= MOUNT_ATTR_NOATIME;
sys_fsmount(fs_fd++, 1, attr_flags);
attr_flags |= MOUNT_ATTR_STRICTATIME;
sys_fsmount(fs_fd++, 0, attr_flags);
attr_flags |= MOUNT_ATTR_NODIRATIME;
sys_fsmount(fs_fd++, 0, attr_flags);
return 0;
}
#
# perf trace -e fsmount ./sys_fsmount
fsmount(0, 0, MOUNT_ATTR_RELATIME) = -1 EINVAL (Invalid argument)
fsmount(1, FSMOUNT_CLOEXEC, MOUNT_ATTR_RDONLY|MOUNT_ATTR_RELATIME) = -1 EINVAL (Invalid argument)
fsmount(2, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_RELATIME) = -1 EINVAL (Invalid argument)
fsmount(3, FSMOUNT_CLOEXEC, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_RELATIME) = -1 EBADF (Bad file descriptor)
fsmount(4, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_RELATIME) = -1 EBADF (Bad file descriptor)
fsmount(5, FSMOUNT_CLOEXEC, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_NOATIME) = -1 EBADF (Bad file descriptor)
fsmount(6, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_NOATIME|MOUNT_ATTR_STRICTATIME) = -1 EINVAL (Invalid argument)
fsmount(7, 0, MOUNT_ATTR_RDONLY|MOUNT_ATTR_NOSUID|MOUNT_ATTR_NODEV|MOUNT_ATTR_NOEXEC|MOUNT_ATTR_NOATIME|MOUNT_ATTR_STRICTATIME|MOUNT_ATTR_NODIRATIME) = -1 EINVAL (Invalid argument)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-w71uge0sfo6ns9uclhwtthca@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-22 02:34:03 +07:00
|
|
|
size_t syscall_arg__scnprintf_fsmount_attr_flags(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_FSMOUNT_ATTR_FLAGS syscall_arg__scnprintf_fsmount_attr_flags
|
|
|
|
|
perf trace: Beautify 'fspick' arguments
Use existing beautifiers for the first 2 args (dfd, path) and wire up
the recently introduced fspick flags table generator.
Now it should be possible to just use:
perf trace -e fspick
As root and see all move_mount syscalls with its args beautified, either
using the vfs_getname perf probe method or using the
augmented_raw_syscalls.c eBPF helper to get the pathnames, the other
args should work in all cases, i.e. all that is needed can be obtained
directly from the raw_syscalls:sys_enter tracepoint args.
# cat sys_fspick.c
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#include <fcntl.h>
#define __NR_fspick 433
#define FSPICK_CLOEXEC 0x00000001
#define FSPICK_SYMLINK_NOFOLLOW 0x00000002
#define FSPICK_NO_AUTOMOUNT 0x00000004
#define FSPICK_EMPTY_PATH 0x00000008
static inline int sys_fspick(int fd, const char *path, int flags)
{
syscall(__NR_fspick, fd, path, flags);
}
int main(int argc, char *argv[])
{
int flags = 0, fd = 0;
open("/foo", 0);
sys_fspick(fd++, "/foo1", flags);
flags |= FSPICK_CLOEXEC;
sys_fspick(fd++, "/foo2", flags);
flags |= FSPICK_SYMLINK_NOFOLLOW;
sys_fspick(fd++, "/foo3", flags);
flags |= FSPICK_NO_AUTOMOUNT;
sys_fspick(fd++, "/foo4", flags);
flags |= FSPICK_EMPTY_PATH;
return sys_fspick(fd++, "/foo5", flags);
}
# perf trace -e fspick ./sys_fspick
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
fspick(0, "/foo1", 0) = -1 ENOENT (No such file or directory)
fspick(1, "/foo2", FSPICK_CLOEXEC) = -1 ENOENT (No such file or directory)
fspick(2, "/foo3", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW) = -1 ENOENT (No such file or directory)
fspick(3, "/foo4", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW|FSPICK_NO_AUTOMOUNT) = -1 ENOENT (No such file or directory)
fspick(4, "/foo5", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW|FSPICK_NO_AUTOMOUNT|FSPICK_EMPTY_PATH) = -1 ENOENT (No such file or directory)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-erau5xjtt8wvgnhvdbchstuk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-21 02:24:15 +07:00
|
|
|
size_t syscall_arg__scnprintf_fspick_flags(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_FSPICK_FLAGS syscall_arg__scnprintf_fspick_flags
|
|
|
|
|
perf trace beauty ioctl: Improve 'cmd' beautifier
By using the _IOC_(DIR,NR,TYPE,SIZE) macros to lookup a 'type' keyed
table that then gets indexed by 'nr', falling back to a notation similar
to the one used by 'strace', only more compact, i.e.:
474.356 ( 0.007 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xae, 0x1c), arg: 0x7ffc934f7880) = 0
474.369 ( 0.053 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xb0, 0x18), arg: 0x7ffc934f77d0) = 0
505.055 ( 0.014 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xaf, 0x4), arg: 0x7ffc934f741c) = 0
This also moves it out of builtin-trace.c and into trace/beauty/ioctl.c
to better compartimentalize all these formatters.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-s3enursdxsvnhdomh6qlte4g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-31 23:20:14 +07:00
|
|
|
size_t syscall_arg__scnprintf_ioctl_cmd(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_IOCTL_CMD syscall_arg__scnprintf_ioctl_cmd
|
|
|
|
|
perf trace beauty kcmp: Beautify arguments
For some unknown reason there is no entry in tracefs's syscalls for
kcmp, i.e. no tracefs/events/syscalls/sys_{enter,exit}_kcmp, so we need
to provide a data dictionary for the fields.
To beautify the 'type' argument we automatically generate a strarray
from tools/include/uapi/kcmp.h, the idx1 and idx2 args, nowadays used
only if type == KCMP_FILE, are masked for all the other types and a
lookup is made for the thread and fd to show the path, if possible,
getting it from the probe:vfs_getname if in place or from procfs, races
allowing.
A system wide strace like tracing session, with callchains shows just
one user so far in this fedora 25 machine:
# perf trace --max-stack 5 -e kcmp
<SNIP>
1502914.400 ( 0.001 ms): systemd/1 kcmp(pid1: 1 (systemd), pid2: 1 (systemd), type: FILE, idx1: 271<socket:[4723475]>, idx2: 25<socket:[4788686]>) = -1 ENOSYS Function not implemented
syscall (/usr/lib64/libc-2.25.so)
same_fd (/usr/lib/systemd/libsystemd-shared-233.so)
service_add_fd_store (/usr/lib/systemd/systemd)
service_notify_message.lto_priv.127 (/usr/lib/systemd/systemd)
1502914.407 ( 0.001 ms): systemd/1 kcmp(pid1: 1 (systemd), pid2: 1 (systemd), type: FILE, idx1: 270<socket:[4726396]>, idx2: 25<socket:[4788686]>) = -1 ENOSYS Function not implemented
syscall (/usr/lib64/libc-2.25.so)
same_fd (/usr/lib/systemd/libsystemd-shared-233.so)
service_add_fd_store (/usr/lib/systemd/systemd)
service_notify_message.lto_priv.127 (/usr/lib/systemd/systemd)
<SNIP>
The backtraces seem to agree this is really kcmp(), but this system
doesn't have the sys_kcmp(), bummer:
# uname -a
Linux jouet 4.14.0-rc3+ #1 SMP Fri Oct 13 12:21:12 -03 2017 x86_64 x86_64 x86_64 GNU/Linux
# grep kcmp /proc/kallsyms
ffffffffb60b8890 W sys_kcmp
$ grep CONFIG_CHECKPOINT_RESTORE ../build/v4.14.0-rc3+/.config
# CONFIG_CHECKPOINT_RESTORE is not set
$
So systemd uses it, good fedora kernel config has it:
$ grep CONFIG_CHECKPOINT_RESTORE /boot/config-4.13.4-200.fc26.x86_64
CONFIG_CHECKPOINT_RESTORE=y
[acme@jouet linux]$
/me goes to rebuild a kernel...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-gz5fca968viw8m7hryjqvrln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-31 21:32:23 +07:00
|
|
|
size_t syscall_arg__scnprintf_kcmp_type(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_KCMP_TYPE syscall_arg__scnprintf_kcmp_type
|
|
|
|
|
|
|
|
size_t syscall_arg__scnprintf_kcmp_idx(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_KCMP_IDX syscall_arg__scnprintf_kcmp_idx
|
|
|
|
|
perf trace beauty: Beautify mount/umount's 'flags' argument
# trace -e mount mount -o ro -t debugfs nodev /mnt
0.000 ( 1.040 ms): mount/27235 mount(dev_name: 0x5601cc8c64e0, dir_name: 0x5601cc8c6500, type: 0x5601cc8c6480, flags: RDONLY) = 0
# trace -e mount mount -o remount,relatime -t debugfs nodev /mnt
0.000 ( 2.946 ms): mount/27262 mount(dev_name: 0x55f4a73d64e0, dir_name: 0x55f4a73d6500, type: 0x55f4a73d6480, flags: REMOUNT|RELATIME) = 0
# trace -e mount mount -o remount,strictatime -t debugfs nodev /mnt
0.000 ( 2.934 ms): mount/27265 mount(dev_name: 0x5617f71d94e0, dir_name: 0x5617f71d9500, type: 0x5617f71d9480, flags: REMOUNT|STRICTATIME) = 0
# trace -e mount mount -o remount,suid,silent -t debugfs nodev /mnt
0.000 ( 0.049 ms): mount/27273 mount(dev_name: 0x55ad65df24e0, dir_name: 0x55ad65df2500, type: 0x55ad65df2480, flags: REMOUNT|SILENT) = 0
# trace -e mount mount -o remount,rw,sync,lazytime -t debugfs nodev /mnt
0.000 ( 2.684 ms): mount/27281 mount(dev_name: 0x561216055530, dir_name: 0x561216055550, type: 0x561216055510, flags: SYNCHRONOUS|REMOUNT|LAZYTIME) = 0
# trace -e mount mount -o remount,dirsync -t debugfs nodev /mnt
0.000 ( 3.512 ms): mount/27314 mount(dev_name: 0x55c4e7188480, dir_name: 0x55c4e7188530, type: 0x55c4e71884a0, flags: REMOUNT|DIRSYNC, data: 0x55c4e71884e0) = 0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Benjamin Peterson <benjamin@python.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-i5ncao73c0bd02qprgrq6wb9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-26 01:18:06 +07:00
|
|
|
unsigned long syscall_arg__mask_val_mount_flags(struct syscall_arg *arg, unsigned long flags);
|
|
|
|
#define SCAMV_MOUNT_FLAGS syscall_arg__mask_val_mount_flags
|
|
|
|
|
|
|
|
size_t syscall_arg__scnprintf_mount_flags(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_MOUNT_FLAGS syscall_arg__scnprintf_mount_flags
|
|
|
|
|
perf trace: Beautify 'move_mount' arguments
Use existing beautifiers for the first 4 args (to/from fds, pathnames)
and wire up the recently introduced move_mount flags table generator.
Now it should be possible to just use:
perf trace -e move_mount
As root and see all move_mount syscalls with its args beautified, except
for the filenames, that need work in the augmented_raw_syscalls.c eBPF
helper to pass more than one, see comment in the
augmented_raw_syscalls.c source code, the other args should work in all
cases, i.e. all that is needed can be obtained directly from the
raw_syscalls:sys_enter tracepoint args.
Running without the strace "skin" (.perfconfig setting output formatting
switches to look like strace output + BPF to collect strings, as we
still need to support collecting multiple string args for the same
syscall, like with move_mount):
# cat sys_move_mount.c
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#define __NR_move_mount 429
#define MOVE_MOUNT_F_SYMLINKS 0x00000001 /* Follow symlinks on from path */
#define MOVE_MOUNT_F_AUTOMOUNTS 0x00000002 /* Follow automounts on from path */
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 /* Empty from path permitted */
#define MOVE_MOUNT_T_SYMLINKS 0x00000010 /* Follow symlinks on to path */
#define MOVE_MOUNT_T_AUTOMOUNTS 0x00000020 /* Follow automounts on to path */
#define MOVE_MOUNT_T_EMPTY_PATH 0x00000040 /* Empty to path permitted */
static inline int sys_move_mount(int from_fd, const char *from_pathname,
int to_fd, const char *to_pathname,
int flags)
{
syscall(__NR_move_mount, from_fd, from_pathname, to_fd, to_pathname, flags);
}
int main(int argc, char *argv[])
{
int flags = 0, from_fd = 0, to_fd = 100;
sys_move_mount(from_fd++, "/foo", to_fd++, "bar", flags);
flags |= MOVE_MOUNT_F_SYMLINKS;
sys_move_mount(from_fd++, "/foo1", to_fd++, "bar1", flags);
flags |= MOVE_MOUNT_F_AUTOMOUNTS;
sys_move_mount(from_fd++, "/foo2", to_fd++, "bar2", flags);
flags |= MOVE_MOUNT_F_EMPTY_PATH;
sys_move_mount(from_fd++, "/foo3", to_fd++, "bar3", flags);
flags |= MOVE_MOUNT_T_SYMLINKS;
sys_move_mount(from_fd++, "/foo4", to_fd++, "bar4", flags);
flags |= MOVE_MOUNT_T_AUTOMOUNTS;
sys_move_mount(from_fd++, "/foo5", to_fd++, "bar5", flags);
flags |= MOVE_MOUNT_T_EMPTY_PATH;
return sys_move_mount(from_fd++, "/foo6", to_fd++, "bar6", flags);
}
# mv ~/.perfconfig ~/.perfconfig.OFF
# perf trace -e move_mount ./sys_move_mount
0.000 ( 0.009 ms): sys_move_mount/28971 move_mount(from_pathname: 0x402010, to_dfd: 100, to_pathname: 0x402015) = -1 ENOENT (No such file or directory)
0.011 ( 0.003 ms): sys_move_mount/28971 move_mount(from_dfd: 1, from_pathname: 0x40201e, to_dfd: 101, to_pathname: 0x402019, flags: F_SYMLINKS) = -1 ENOENT (No such file or directory)
0.016 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 2, from_pathname: 0x402029, to_dfd: 102, to_pathname: 0x402024, flags: F_SYMLINKS|F_AUTOMOUNTS) = -1 ENOENT (No such file or directory)
0.020 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 3, from_pathname: 0x402034, to_dfd: 103, to_pathname: 0x40202f, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH) = -1 ENOENT (No such file or directory)
0.023 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 4, from_pathname: 0x40203f, to_dfd: 104, to_pathname: 0x40203a, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS) = -1 ENOENT (No such file or directory)
0.027 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 5, from_pathname: 0x40204a, to_dfd: 105, to_pathname: 0x402045, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS|T_AUTOMOUNTS) = -1 ENOENT (No such file or directory)
0.031 ( 0.017 ms): sys_move_mount/28971 move_mount(from_dfd: 6, from_pathname: 0x402055, to_dfd: 106, to_pathname: 0x402050, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS|T_AUTOMOUNTS|T_EMPTY_PATH) = -1 ENOENT (No such file or directory)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-83rim8g4k0s4gieieh5nnlck@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-21 00:58:03 +07:00
|
|
|
size_t syscall_arg__scnprintf_move_mount_flags(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_MOVE_MOUNT_FLAGS syscall_arg__scnprintf_move_mount_flags
|
|
|
|
|
perf trace beauty: Beautify pkey_{alloc,free,mprotect} arguments
Reuse 'mprotect' beautifiers for 'pkey_mprotect'.
System wide tracing pkey_alloc, pkey_free and pkey_mprotect calls, with
backtraces:
# perf trace -e pkey_alloc,pkey_mprotect,pkey_free --max-stack=5
0.000 ( 0.011 ms): pkey/7818 pkey_alloc(init_val: DISABLE_ACCESS|DISABLE_WRITE) = -1 EINVAL Invalid argument
syscall (/usr/lib64/libc-2.25.so)
pkey_alloc (/home/acme/c/pkey)
0.022 ( 0.003 ms): pkey/7818 pkey_mprotect(start: 0x7f28c3890000, len: 4096, prot: READ|WRITE, pkey: -1) = 0
syscall (/usr/lib64/libc-2.25.so)
pkey_mprotect (/home/acme/c/pkey)
0.030 ( 0.002 ms): pkey/7818 pkey_free(pkey: -1 ) = -1 EINVAL Invalid argument
syscall (/usr/lib64/libc-2.25.so)
pkey_free (/home/acme/c/pkey)
The tools/include/uapi/asm-generic/mman-common.h file is used to find
the access rights defines for the pkey_alloc syscall second argument.
Since we have the detector of changes for the tools/include header files
versus its kernel origin (include/uapi/asm-generic/mman-common.h), we'll
get whatever new flag appears for that argument automatically.
This method should be used in other cases where it is easy to generate
those flags tables because the header has properly namespaced defines
like PKEY_DISABLE_ACCESS and PKEY_DISABLE_WRITE.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3xq5312qlks7wtfzv2sk3nct@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-28 21:47:11 +07:00
|
|
|
size_t syscall_arg__scnprintf_pkey_alloc_access_rights(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_PKEY_ALLOC_ACCESS_RIGHTS syscall_arg__scnprintf_pkey_alloc_access_rights
|
|
|
|
|
2017-07-15 01:16:54 +07:00
|
|
|
size_t syscall_arg__scnprintf_open_flags(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_OPEN_FLAGS syscall_arg__scnprintf_open_flags
|
|
|
|
|
perf trace beauty: Beautify arch_prctl()'s arguments
This actually so far, AFAIK is available only in x86, so the code was
put in place with x86 prefixes, in arches where it is not available it
will just not be called, so no further mechanisms are needed at this
time.
Later, when other arches wire this up, we'll just look at the uname
(live sessions) or perf_env data in the perf.data header to auto-wire
the right beautifier.
With this the output is the same as produced by 'strace' when used with
the following ~/.perfconfig:
# cat ~/.perfconfig
[llvm]
dump-obj = true
[trace]
add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
show_zeros = yes
show_duration = no
no_inherit = yes
show_timestamp = no
show_arg_names = no
args_alignment = -40
show_prefix = yes
#
And, on fedora 29, since the string tables are generated from the kernel
sources, we don't know about 0x3001, just like strace:
--- /tmp/strace 2018-12-17 11:22:08.707586721 -0300
+++ /tmp/trace 2018-12-18 11:11:32.037512729 -0300
@@ -1,49 +1,49 @@
-arch_prctl(0x3001 /* ARCH_??? */, 0x7ffc8a92dc80) = -1 EINVAL (Invalid argument)
+arch_prctl(0x3001 /* ARCH_??? */, 0x7ffe4eb93ae0) = -1 EINVAL (Invalid argument)
-arch_prctl(ARCH_SET_FS, 0x7faf6700f540) = 0
+arch_prctl(ARCH_SET_FS, 0x7fb507364540) = 0
And that seems to be related to the CET/Shadow Stack feature, that
userland in Fedora 29 (glibc 2.28) are querying the kernel about, that
0x3001 seems to be ARCH_CET_STATUS, I'll check the situation and test
with a fedora 29 kernel to see if the other codes are used.
A diff that ignores the different pointers for different runs needs to
be put in place in the upcoming regression tests comparing 'perf trace's
output to strace's.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-73a9prs8ktkrt97trtdmdjs8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18 21:05:56 +07:00
|
|
|
size_t syscall_arg__scnprintf_x86_arch_prctl_code(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_X86_ARCH_PRCTL_CODE syscall_arg__scnprintf_x86_arch_prctl_code
|
|
|
|
|
perf trace beauty prctl: Generate 'option' string table from kernel headers
This is one more case where the way that syscall parameter values are
defined in kernel headers are easy to parse using a shell script that
will then generate the string table that gets used by the prctl 'option'
argument beautifier.
This way as soon as the header syncronization mechanism in perf's build
system detects a change in a copy of a kernel ABI header and that file
is syncronized, we get 'perf trace' updated automagically.
Further work needed for the PR_SET_ values, as well for using eBPF to
copy the non-integer arguments to/from the kernel.
E.g.: System wide prctl tracing:
# perf trace -e prctl
1668.028 ( 0.025 ms): TaskSchedulerR/10649 prctl(option: SET_NAME, arg2: 0x2b61d5db15d0) = 0
3365.663 ( 0.018 ms): chrome/10650 prctl(option: SET_SECCOMP, arg2: 2, arg4: 8 ) = -1 EFAULT Bad address
3366.585 ( 0.010 ms): chrome/10650 prctl(option: SET_NO_NEW_PRIVS, arg2: 1 ) = 0
3367.173 ( 0.009 ms): TaskSchedulerR/10652 prctl(option: SET_NAME, arg2: 0x2b61d2aaa300) = 0
3367.222 ( 0.003 ms): TaskSchedulerR/10653 prctl(option: SET_NAME, arg2: 0x2b61d2aaa1e0) = 0
3367.244 ( 0.002 ms): TaskSchedulerR/10654 prctl(option: SET_NAME, arg2: 0x2b61d2aaa0c0) = 0
3367.265 ( 0.002 ms): TaskSchedulerR/10655 prctl(option: SET_NAME, arg2: 0x2b61d2ac7f90) = 0
3367.281 ( 0.002 ms): Chrome_ChildIO/10656 prctl(option: SET_NAME, arg2: 0x7efbe406bb11) = 0
3367.220 ( 0.004 ms): TaskSchedulerS/10651 prctl(option: SET_NAME, arg2: 0x2b61d2ac1be0) = 0
3370.906 ( 0.010 ms): GpuMemoryThrea/10657 prctl(option: SET_NAME, arg2: 0x7efbe386ab11) = 0
3370.983 ( 0.003 ms): File/10658 prctl(option: SET_NAME, arg2: 0x7efbe3069b11 ) = 0
3384.272 ( 0.020 ms): Compositor/10659 prctl(option: SET_NAME, arg2: 0x7efbe2868b11 ) = 0
3612.091 ( 0.012 ms): DOM Worker/11489 prctl(option: SET_NAME, arg2: 0x7f49ab97ebf2 ) = 0
<SNIP>
4512.437 ( 0.004 ms): (sa1)/11490 prctl(option: SET_NAME, arg2: 0x7ffca15af844 ) = 0
4512.468 ( 0.002 ms): (sa1)/11490 prctl(option: SET_MM, arg2: ARG_START, arg3: 0x7f5cb7c81000) = 0
4512.472 ( 0.001 ms): (sa1)/11490 prctl(option: SET_MM, arg2: ARG_END, arg3: 0x7f5cb7c81006) = 0
4514.667 ( 0.002 ms): (sa1)/11490 prctl(option: GET_SECUREBITS ) = 0
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-q0s2uw579o5ei6xlh2zjirgz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-27 01:19:35 +07:00
|
|
|
size_t syscall_arg__scnprintf_prctl_option(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_PRCTL_OPTION syscall_arg__scnprintf_prctl_option
|
|
|
|
|
2020-02-12 01:46:10 +07:00
|
|
|
extern struct strarray strarray__prctl_options;
|
|
|
|
|
perf trace beauty prctl: Generate 'option' string table from kernel headers
This is one more case where the way that syscall parameter values are
defined in kernel headers are easy to parse using a shell script that
will then generate the string table that gets used by the prctl 'option'
argument beautifier.
This way as soon as the header syncronization mechanism in perf's build
system detects a change in a copy of a kernel ABI header and that file
is syncronized, we get 'perf trace' updated automagically.
Further work needed for the PR_SET_ values, as well for using eBPF to
copy the non-integer arguments to/from the kernel.
E.g.: System wide prctl tracing:
# perf trace -e prctl
1668.028 ( 0.025 ms): TaskSchedulerR/10649 prctl(option: SET_NAME, arg2: 0x2b61d5db15d0) = 0
3365.663 ( 0.018 ms): chrome/10650 prctl(option: SET_SECCOMP, arg2: 2, arg4: 8 ) = -1 EFAULT Bad address
3366.585 ( 0.010 ms): chrome/10650 prctl(option: SET_NO_NEW_PRIVS, arg2: 1 ) = 0
3367.173 ( 0.009 ms): TaskSchedulerR/10652 prctl(option: SET_NAME, arg2: 0x2b61d2aaa300) = 0
3367.222 ( 0.003 ms): TaskSchedulerR/10653 prctl(option: SET_NAME, arg2: 0x2b61d2aaa1e0) = 0
3367.244 ( 0.002 ms): TaskSchedulerR/10654 prctl(option: SET_NAME, arg2: 0x2b61d2aaa0c0) = 0
3367.265 ( 0.002 ms): TaskSchedulerR/10655 prctl(option: SET_NAME, arg2: 0x2b61d2ac7f90) = 0
3367.281 ( 0.002 ms): Chrome_ChildIO/10656 prctl(option: SET_NAME, arg2: 0x7efbe406bb11) = 0
3367.220 ( 0.004 ms): TaskSchedulerS/10651 prctl(option: SET_NAME, arg2: 0x2b61d2ac1be0) = 0
3370.906 ( 0.010 ms): GpuMemoryThrea/10657 prctl(option: SET_NAME, arg2: 0x7efbe386ab11) = 0
3370.983 ( 0.003 ms): File/10658 prctl(option: SET_NAME, arg2: 0x7efbe3069b11 ) = 0
3384.272 ( 0.020 ms): Compositor/10659 prctl(option: SET_NAME, arg2: 0x7efbe2868b11 ) = 0
3612.091 ( 0.012 ms): DOM Worker/11489 prctl(option: SET_NAME, arg2: 0x7f49ab97ebf2 ) = 0
<SNIP>
4512.437 ( 0.004 ms): (sa1)/11490 prctl(option: SET_NAME, arg2: 0x7ffca15af844 ) = 0
4512.468 ( 0.002 ms): (sa1)/11490 prctl(option: SET_MM, arg2: ARG_START, arg3: 0x7f5cb7c81000) = 0
4512.472 ( 0.001 ms): (sa1)/11490 prctl(option: SET_MM, arg2: ARG_END, arg3: 0x7f5cb7c81006) = 0
4514.667 ( 0.002 ms): (sa1)/11490 prctl(option: GET_SECUREBITS ) = 0
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-q0s2uw579o5ei6xlh2zjirgz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-27 01:19:35 +07:00
|
|
|
size_t syscall_arg__scnprintf_prctl_arg2(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_PRCTL_ARG2 syscall_arg__scnprintf_prctl_arg2
|
|
|
|
|
|
|
|
size_t syscall_arg__scnprintf_prctl_arg3(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_PRCTL_ARG3 syscall_arg__scnprintf_prctl_arg3
|
|
|
|
|
perf trace: Beautify renameat2's flags argument
# strace -e renameat2 -f perf trace -e rename* mv c /tmp
strace: Process 10824 attached
[pid 10824] renameat2(AT_FDCWD, "c", AT_FDCWD, "/tmp", RENAME_NOREPLACE) = -1 EXDEV (Invalid cross-device link)
[pid 10824] renameat2(AT_FDCWD, "c", AT_FDCWD, "/tmp/c", RENAME_NOREPLACE) = -1 EEXIST (File exists)
1.857 ( 0.008 ms): mv/10824 renameat2(olddfd: CWD, oldname: 0x7ffc72ff3d81, newdfd: CWD, newname: 0x7ffc72ff3d83, flags: NOREPLACE) = -1 EXDEV Invalid cross-device link
2.002 ( 0.006 ms): mv/10824 renameat2(olddfd: CWD, oldname: 0x7ffc72ff3d81, newdfd: CWD, newname: 0x55ad609efcc0, flags: NOREPLACE) = -1 EEXIST File exists
mv: 'c' and '/tmp/c' are the same file
[pid 10824] +++ exited with 1 +++
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=10824, si_uid=0, si_status=1, si_utime=0, si_stime=0} ---
+++ exited with 0 +++
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-glyt6nzlt1yx56m5bshy6g83@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-11 20:39:30 +07:00
|
|
|
size_t syscall_arg__scnprintf_renameat2_flags(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_RENAMEAT2_FLAGS syscall_arg__scnprintf_renameat2_flags
|
|
|
|
|
perf trace augmented_syscalls: Augment connect's 'sockaddr' arg
As the first example of augmenting something other than a 'filename',
augment the 'struct sockaddr' argument for the 'connect' syscall:
# perf trace -e tools/perf/examples/bpf/augmented_syscalls.c ssh -6 fedorapeople.org
0.000 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
0.042 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
1.329 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
1.362 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
1.458 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
1.478 ssh/29669 connect(fd: 3, uservaddr: { .family: LOCAL, path: /var/run/nscd/socket }, addrlen: 110)
1.683 ssh/29669 connect(fd: 3<socket:[125942]>, uservaddr: { .family: INET, port: 53, addr: 192.168.43.1 }, addrlen: 16)
4.710 ssh/29669 connect(fd: 3<socket:[125942]>, uservaddr: { .family: INET6, port: 22, addr: 2610:28:3090:3001:5054:ff:fea7:9474 }, addrlen: 28)
root@fedorapeople.org: Permission denied (publickey).
#
This is still just augmenting the syscalls:sys_enter_connect part, later
we'll wire this up to augment the enter+exit combo, like in the
tradicional 'perf trace' and 'strace' outputs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-s7l541cbiqb22ifio6z7dpf6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-29 02:24:44 +07:00
|
|
|
size_t syscall_arg__scnprintf_sockaddr(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_SOCKADDR syscall_arg__scnprintf_sockaddr
|
|
|
|
|
2018-07-26 19:26:13 +07:00
|
|
|
size_t syscall_arg__scnprintf_socket_protocol(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_SK_PROTO syscall_arg__scnprintf_socket_protocol
|
|
|
|
|
perf trace: Beautify statx syscall 'flag' and 'mask' arguments
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-15 02:19:30 +07:00
|
|
|
size_t syscall_arg__scnprintf_statx_flags(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_STATX_FLAGS syscall_arg__scnprintf_statx_flags
|
|
|
|
|
|
|
|
size_t syscall_arg__scnprintf_statx_mask(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_STATX_MASK syscall_arg__scnprintf_statx_mask
|
|
|
|
|
perf trace: Beautify 'sync_file_range' arguments
Use existing beautifiers for the first arg, fd, assigned using the
heuristic that looks for syscall arg names and associates SCA_FD with
'fd' named argumes, and wire up the recently introduced sync_file_range
flags table generator.
Now it should be possible to just use:
perf trace -e sync_file_range
As root and see all sync_file_range syscalls with its args beautified.
Doing a syscall strace like session looking for this syscall, then run
postgresql's initdb command:
# perf trace -e sync_file_range
<SNIP>
initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(7</var/lib/pgsql/data/base/1/2682>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(7</var/lib/pgsql/data/base/1/2682>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(6</var/lib/pgsql/data/global/1260_fsm>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(5</var/lib/pgsql/data/global>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(4</var/lib/pgsql/data>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
initdb/1332 sync_file_range(4</var/lib/pgsql/data>, 0, 0, SYNC_FILE_RANGE_WRITE) = 0
^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8tqy34xhpg8gwnaiv74xy93w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-22 07:47:07 +07:00
|
|
|
size_t syscall_arg__scnprintf_sync_file_range_flags(char *bf, size_t size, struct syscall_arg *arg);
|
|
|
|
#define SCA_SYNC_FILE_RANGE_FLAGS syscall_arg__scnprintf_sync_file_range_flags
|
|
|
|
|
perf trace: Allow asking for not suppressing common string prefixes
So far we've been suppressing common stuff such as "MAP_" in the mmap
flags, showing "SHARED" instead of "MAP_SHARED", allow for those
prefixes (and a few suffixes) to be shown:
# trace -e *map,open*,*seek sleep 1
openat("/etc/ld.so.cache", CLOEXEC) = 3
mmap(0, 109093, READ, PRIVATE, 3, 0) = 0x7ff61c695000
openat("/lib64/libc.so.6", CLOEXEC) = 3
lseek(3, 792, SET) = 792
mmap(0, 8192, READ|WRITE, PRIVATE|ANONYMOUS) = 0x7ff61c693000
lseek(3, 792, SET) = 792
lseek(3, 864, SET) = 864
mmap(0, 1857568, READ, PRIVATE|DENYWRITE, 3, 0) = 0x7ff61c4cd000
mmap(0x7ff61c4ef000, 1363968, EXEC|READ, PRIVATE|FIXED|DENYWRITE, 3, 139264) = 0x7ff61c4ef000
mmap(0x7ff61c63c000, 311296, READ, PRIVATE|FIXED|DENYWRITE, 3, 1503232) = 0x7ff61c63c000
mmap(0x7ff61c689000, 24576, READ|WRITE, PRIVATE|FIXED|DENYWRITE, 3, 1814528) = 0x7ff61c689000
mmap(0x7ff61c68f000, 14368, READ|WRITE, PRIVATE|FIXED|ANONYMOUS) = 0x7ff61c68f000
munmap(0x7ff61c695000, 109093) = 0
openat("/usr/lib/locale/locale-archive", CLOEXEC) = 3
mmap(0, 217749968, READ, PRIVATE, 3, 0) = 0x7ff60f523000
#
# vim ~/.perfconfig
#
# perf config
llvm.dump-obj=true
trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
trace.show_zeros=yes
trace.show_duration=no
trace.no_inherit=yes
trace.show_timestamp=no
trace.show_arg_names=no
trace.args_alignment=0
trace.string_quote="
trace.show_prefix=yes
#
#
# trace -e *map,open*,*seek sleep 1
openat(AT_FDCWD, "/etc/ld.so.cache", O_CLOEXEC) = 3
mmap(0, 109093, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7ebbe59000
openat(AT_FDCWD, "/lib64/libc.so.6", O_CLOEXEC) = 3
lseek(3, 792, SEEK_SET) = 792
mmap(0, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f7ebbe57000
lseek(3, 792, SEEK_SET) = 792
lseek(3, 864, SEEK_SET) = 864
mmap(0, 1857568, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f7ebbc91000
mmap(0x7f7ebbcb3000, 1363968, PROT_EXEC|PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 139264) = 0x7f7ebbcb3000
mmap(0x7f7ebbe00000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1503232) = 0x7f7ebbe00000
mmap(0x7f7ebbe4d000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1814528) = 0x7f7ebbe4d000
mmap(0x7f7ebbe53000, 14368, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f7ebbe53000
munmap(0x7f7ebbe59000, 109093) = 0
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_CLOEXEC) = 3
mmap(0, 217749968, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7eaece7000
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mtn1i4rjowjl72trtnbmvjd4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-15 03:06:47 +07:00
|
|
|
size_t open__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix);
|
perf beauty open: Detach the syscall_arg agnostic bits from the flags formatter
We may want to use this in other contexts, like when formatting the
return of fcntl(fd, F_GETFL).
Make it have the following signature, so that we can set the formatter
for the return argument while processing the arguments of a syscall, as
fcntl, for instance, may return fds, flags, etc, so need different
return value formatters:
size_t formatter(unsigned long value, char *bf, size_t size);
This gets so detached from 'perf trace' internals that we may well get
all these and move to a tools/lib/syscall_beauty/ library at some point
and use it in other tools/ living utilities.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9aw8t22ztvnkuv26l6sw1c18@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-14 21:18:41 +07:00
|
|
|
|
2017-07-14 21:35:03 +07:00
|
|
|
void syscall_arg__set_ret_scnprintf(struct syscall_arg *arg,
|
2017-07-15 01:16:54 +07:00
|
|
|
size_t (*ret_scnprintf)(char *bf, size_t size, struct syscall_arg *arg));
|
2017-07-14 21:35:03 +07:00
|
|
|
|
2018-01-19 15:56:15 +07:00
|
|
|
const char *arch_syscalls__strerrno(const char *arch, int err);
|
|
|
|
|
perf trace: Beautify statx syscall 'flag' and 'mask' arguments
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-15 02:19:30 +07:00
|
|
|
#endif /* _PERF_TRACE_BEAUTY_H */
|