linux_dsm_epyc7002/net/sched/sch_mqprio.c

643 lines
17 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
/*
* net/sched/sch_mqprio.c
*
* Copyright (c) 2010 John Fastabend <john.r.fastabend@intel.com>
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/module.h>
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <net/sch_generic.h>
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
#include <net/pkt_cls.h>
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
struct mqprio_sched {
struct Qdisc **qdiscs;
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
u16 mode;
u16 shaper;
int hw_offload;
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
u32 flags;
u64 min_rate[TC_QOPT_MAX_QUEUE];
u64 max_rate[TC_QOPT_MAX_QUEUE];
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
};
static void mqprio_destroy(struct Qdisc *sch)
{
struct net_device *dev = qdisc_dev(sch);
struct mqprio_sched *priv = qdisc_priv(sch);
unsigned int ntx;
if (priv->qdiscs) {
for (ntx = 0;
ntx < dev->num_tx_queues && priv->qdiscs[ntx];
ntx++)
qdisc_put(priv->qdiscs[ntx]);
kfree(priv->qdiscs);
}
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
if (priv->hw_offload && dev->netdev_ops->ndo_setup_tc) {
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
struct tc_mqprio_qopt_offload mqprio = { { 0 } };
switch (priv->mode) {
case TC_MQPRIO_MODE_DCB:
case TC_MQPRIO_MODE_CHANNEL:
dev->netdev_ops->ndo_setup_tc(dev,
TC_SETUP_QDISC_MQPRIO,
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
&mqprio);
break;
default:
return;
}
} else {
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
netdev_set_num_tc(dev, 0);
}
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
}
static int mqprio_parse_opt(struct net_device *dev, struct tc_mqprio_qopt *qopt)
{
int i, j;
/* Verify num_tc is not out of max range */
if (qopt->num_tc > TC_MAX_QUEUE)
return -EINVAL;
/* Verify priority mapping uses valid tcs */
for (i = 0; i < TC_BITMASK + 1; i++) {
if (qopt->prio_tc_map[i] >= qopt->num_tc)
return -EINVAL;
}
/* Limit qopt->hw to maximum supported offload value. Drivers have
* the option of overriding this later if they don't support the a
* given offload type.
*/
if (qopt->hw > TC_MQPRIO_HW_OFFLOAD_MAX)
qopt->hw = TC_MQPRIO_HW_OFFLOAD_MAX;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
/* If hardware offload is requested we will leave it to the device
* to either populate the queue counts itself or to validate the
* provided queue counts. If ndo_setup_tc is not present then
* hardware doesn't support offload and we should return an error.
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
*/
if (qopt->hw)
return dev->netdev_ops->ndo_setup_tc ? 0 : -EINVAL;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
for (i = 0; i < qopt->num_tc; i++) {
unsigned int last = qopt->offset[i] + qopt->count[i];
/* Verify the queue count is in tx range being equal to the
* real_num_tx_queues indicates the last queue is in use.
*/
if (qopt->offset[i] >= dev->real_num_tx_queues ||
!qopt->count[i] ||
last > dev->real_num_tx_queues)
return -EINVAL;
/* Verify that the offset and counts do not overlap */
for (j = i + 1; j < qopt->num_tc; j++) {
if (last > qopt->offset[j])
return -EINVAL;
}
}
return 0;
}
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
static const struct nla_policy mqprio_policy[TCA_MQPRIO_MAX + 1] = {
[TCA_MQPRIO_MODE] = { .len = sizeof(u16) },
[TCA_MQPRIO_SHAPER] = { .len = sizeof(u16) },
[TCA_MQPRIO_MIN_RATE64] = { .type = NLA_NESTED },
[TCA_MQPRIO_MAX_RATE64] = { .type = NLA_NESTED },
};
static int parse_attr(struct nlattr *tb[], int maxtype, struct nlattr *nla,
const struct nla_policy *policy, int len)
{
int nested_len = nla_len(nla) - NLA_ALIGN(len);
if (nested_len >= nla_attr_size(0))
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 19:07:28 +07:00
return nla_parse_deprecated(tb, maxtype,
nla_data(nla) + NLA_ALIGN(len),
nested_len, policy, NULL);
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1));
return 0;
}
static int mqprio_init(struct Qdisc *sch, struct nlattr *opt,
struct netlink_ext_ack *extack)
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
{
struct net_device *dev = qdisc_dev(sch);
struct mqprio_sched *priv = qdisc_priv(sch);
struct netdev_queue *dev_queue;
struct Qdisc *qdisc;
int i, err = -EOPNOTSUPP;
struct tc_mqprio_qopt *qopt = NULL;
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
struct nlattr *tb[TCA_MQPRIO_MAX + 1];
struct nlattr *attr;
int rem;
int len;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
BUILD_BUG_ON(TC_MAX_QUEUE != TC_QOPT_MAX_QUEUE);
BUILD_BUG_ON(TC_BITMASK != TC_QOPT_BITMASK);
if (sch->parent != TC_H_ROOT)
return -EOPNOTSUPP;
if (!netif_is_multiqueue(dev))
return -EOPNOTSUPP;
/* make certain can allocate enough classids to handle queues */
if (dev->num_tx_queues >= TC_H_MIN_PRIORITY)
return -ENOMEM;
if (!opt || nla_len(opt) < sizeof(*qopt))
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
return -EINVAL;
qopt = nla_data(opt);
if (mqprio_parse_opt(dev, qopt))
return -EINVAL;
len = nla_len(opt) - NLA_ALIGN(sizeof(*qopt));
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
if (len > 0) {
err = parse_attr(tb, TCA_MQPRIO_MAX, opt, mqprio_policy,
sizeof(*qopt));
if (err < 0)
return err;
if (!qopt->hw)
return -EINVAL;
if (tb[TCA_MQPRIO_MODE]) {
priv->flags |= TC_MQPRIO_F_MODE;
priv->mode = *(u16 *)nla_data(tb[TCA_MQPRIO_MODE]);
}
if (tb[TCA_MQPRIO_SHAPER]) {
priv->flags |= TC_MQPRIO_F_SHAPER;
priv->shaper = *(u16 *)nla_data(tb[TCA_MQPRIO_SHAPER]);
}
if (tb[TCA_MQPRIO_MIN_RATE64]) {
if (priv->shaper != TC_MQPRIO_SHAPER_BW_RATE)
return -EINVAL;
i = 0;
nla_for_each_nested(attr, tb[TCA_MQPRIO_MIN_RATE64],
rem) {
if (nla_type(attr) != TCA_MQPRIO_MIN_RATE64)
return -EINVAL;
if (i >= qopt->num_tc)
break;
priv->min_rate[i] = *(u64 *)nla_data(attr);
i++;
}
priv->flags |= TC_MQPRIO_F_MIN_RATE;
}
if (tb[TCA_MQPRIO_MAX_RATE64]) {
if (priv->shaper != TC_MQPRIO_SHAPER_BW_RATE)
return -EINVAL;
i = 0;
nla_for_each_nested(attr, tb[TCA_MQPRIO_MAX_RATE64],
rem) {
if (nla_type(attr) != TCA_MQPRIO_MAX_RATE64)
return -EINVAL;
if (i >= qopt->num_tc)
break;
priv->max_rate[i] = *(u64 *)nla_data(attr);
i++;
}
priv->flags |= TC_MQPRIO_F_MAX_RATE;
}
}
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
/* pre-allocate qdisc, attachment can't fail */
priv->qdiscs = kcalloc(dev->num_tx_queues, sizeof(priv->qdiscs[0]),
GFP_KERNEL);
net_sched: fix error recovery at qdisc creation Dmitry reported uses after free in qdisc code [1] The problem here is that ops->init() can return an error. qdisc_create_dflt() then call ops->destroy(), while qdisc_create() does _not_ call it. Four qdisc chose to call their own ops->destroy(), assuming their caller would not. This patch makes sure qdisc_create() calls ops->destroy() and fixes the four qdisc to avoid double free. [1] BUG: KASAN: use-after-free in mq_destroy+0x242/0x290 net/sched/sch_mq.c:33 at addr ffff8801d415d440 Read of size 8 by task syz-executor2/5030 CPU: 0 PID: 5030 Comm: syz-executor2 Not tainted 4.3.5-smp-DEV #119 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000046 ffff8801b435b870 ffffffff81bbbed4 ffff8801db000400 ffff8801d415d440 ffff8801d415dc40 ffff8801c4988510 ffff8801b435b898 ffffffff816682b1 ffff8801b435b928 ffff8801d415d440 ffff8801c49880c0 Call Trace: [<ffffffff81bbbed4>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81bbbed4>] dump_stack+0x6c/0x98 lib/dump_stack.c:51 [<ffffffff816682b1>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158 [<ffffffff81668524>] print_address_description mm/kasan/report.c:196 [inline] [<ffffffff81668524>] kasan_report_error+0x1b4/0x4b0 mm/kasan/report.c:285 [<ffffffff81668953>] kasan_report mm/kasan/report.c:305 [inline] [<ffffffff81668953>] __asan_report_load8_noabort+0x43/0x50 mm/kasan/report.c:326 [<ffffffff82527b02>] mq_destroy+0x242/0x290 net/sched/sch_mq.c:33 [<ffffffff82524bdd>] qdisc_destroy+0x12d/0x290 net/sched/sch_generic.c:953 [<ffffffff82524e30>] qdisc_create_dflt+0xf0/0x120 net/sched/sch_generic.c:848 [<ffffffff8252550d>] attach_default_qdiscs net/sched/sch_generic.c:1029 [inline] [<ffffffff8252550d>] dev_activate+0x6ad/0x880 net/sched/sch_generic.c:1064 [<ffffffff824b1db1>] __dev_open+0x221/0x320 net/core/dev.c:1403 [<ffffffff824b24ce>] __dev_change_flags+0x15e/0x3e0 net/core/dev.c:6858 [<ffffffff824b27de>] dev_change_flags+0x8e/0x140 net/core/dev.c:6926 [<ffffffff824f5bf6>] dev_ifsioc+0x446/0x890 net/core/dev_ioctl.c:260 [<ffffffff824f61fa>] dev_ioctl+0x1ba/0xb80 net/core/dev_ioctl.c:546 [<ffffffff82430509>] sock_do_ioctl+0x99/0xb0 net/socket.c:879 [<ffffffff82430d30>] sock_ioctl+0x2a0/0x390 net/socket.c:958 [<ffffffff816f3b68>] vfs_ioctl fs/ioctl.c:44 [inline] [<ffffffff816f3b68>] do_vfs_ioctl+0x8a8/0xe50 fs/ioctl.c:611 [<ffffffff816f41a4>] SYSC_ioctl fs/ioctl.c:626 [inline] [<ffffffff816f41a4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:617 [<ffffffff8123e357>] entry_SYSCALL_64_fastpath+0x12/0x17 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-11 01:31:49 +07:00
if (!priv->qdiscs)
return -ENOMEM;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
for (i = 0; i < dev->num_tx_queues; i++) {
dev_queue = netdev_get_tx_queue(dev, i);
qdisc = qdisc_create_dflt(dev_queue,
get_default_qdisc_ops(dev, i),
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
TC_H_MAKE(TC_H_MAJ(sch->handle),
TC_H_MIN(i + 1)), extack);
net_sched: fix error recovery at qdisc creation Dmitry reported uses after free in qdisc code [1] The problem here is that ops->init() can return an error. qdisc_create_dflt() then call ops->destroy(), while qdisc_create() does _not_ call it. Four qdisc chose to call their own ops->destroy(), assuming their caller would not. This patch makes sure qdisc_create() calls ops->destroy() and fixes the four qdisc to avoid double free. [1] BUG: KASAN: use-after-free in mq_destroy+0x242/0x290 net/sched/sch_mq.c:33 at addr ffff8801d415d440 Read of size 8 by task syz-executor2/5030 CPU: 0 PID: 5030 Comm: syz-executor2 Not tainted 4.3.5-smp-DEV #119 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000046 ffff8801b435b870 ffffffff81bbbed4 ffff8801db000400 ffff8801d415d440 ffff8801d415dc40 ffff8801c4988510 ffff8801b435b898 ffffffff816682b1 ffff8801b435b928 ffff8801d415d440 ffff8801c49880c0 Call Trace: [<ffffffff81bbbed4>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81bbbed4>] dump_stack+0x6c/0x98 lib/dump_stack.c:51 [<ffffffff816682b1>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158 [<ffffffff81668524>] print_address_description mm/kasan/report.c:196 [inline] [<ffffffff81668524>] kasan_report_error+0x1b4/0x4b0 mm/kasan/report.c:285 [<ffffffff81668953>] kasan_report mm/kasan/report.c:305 [inline] [<ffffffff81668953>] __asan_report_load8_noabort+0x43/0x50 mm/kasan/report.c:326 [<ffffffff82527b02>] mq_destroy+0x242/0x290 net/sched/sch_mq.c:33 [<ffffffff82524bdd>] qdisc_destroy+0x12d/0x290 net/sched/sch_generic.c:953 [<ffffffff82524e30>] qdisc_create_dflt+0xf0/0x120 net/sched/sch_generic.c:848 [<ffffffff8252550d>] attach_default_qdiscs net/sched/sch_generic.c:1029 [inline] [<ffffffff8252550d>] dev_activate+0x6ad/0x880 net/sched/sch_generic.c:1064 [<ffffffff824b1db1>] __dev_open+0x221/0x320 net/core/dev.c:1403 [<ffffffff824b24ce>] __dev_change_flags+0x15e/0x3e0 net/core/dev.c:6858 [<ffffffff824b27de>] dev_change_flags+0x8e/0x140 net/core/dev.c:6926 [<ffffffff824f5bf6>] dev_ifsioc+0x446/0x890 net/core/dev_ioctl.c:260 [<ffffffff824f61fa>] dev_ioctl+0x1ba/0xb80 net/core/dev_ioctl.c:546 [<ffffffff82430509>] sock_do_ioctl+0x99/0xb0 net/socket.c:879 [<ffffffff82430d30>] sock_ioctl+0x2a0/0x390 net/socket.c:958 [<ffffffff816f3b68>] vfs_ioctl fs/ioctl.c:44 [inline] [<ffffffff816f3b68>] do_vfs_ioctl+0x8a8/0xe50 fs/ioctl.c:611 [<ffffffff816f41a4>] SYSC_ioctl fs/ioctl.c:626 [inline] [<ffffffff816f41a4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:617 [<ffffffff8123e357>] entry_SYSCALL_64_fastpath+0x12/0x17 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-11 01:31:49 +07:00
if (!qdisc)
return -ENOMEM;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
priv->qdiscs[i] = qdisc;
net_sched: fix qdisc_tree_decrease_qlen() races qdisc_tree_decrease_qlen() suffers from two problems on multiqueue devices. One problem is that it updates sch->q.qlen and sch->qstats.drops on the mq/mqprio root qdisc, while it should not : Daniele reported underflows errors : [ 681.774821] PAX: sch->q.qlen: 0 n: 1 [ 681.774825] PAX: size overflow detected in function qdisc_tree_decrease_qlen net/sched/sch_api.c:769 cicus.693_49 min, count: 72, decl: qlen; num: 0; context: sk_buff_head; [ 681.774954] CPU: 2 PID: 19 Comm: ksoftirqd/2 Tainted: G O 4.2.6.201511282239-1-grsec #1 [ 681.774955] Hardware name: ASUSTeK COMPUTER INC. X302LJ/X302LJ, BIOS X302LJ.202 03/05/2015 [ 681.774956] ffffffffa9a04863 0000000000000000 0000000000000000 ffffffffa990ff7c [ 681.774959] ffffc90000d3bc38 ffffffffa95d2810 0000000000000007 ffffffffa991002b [ 681.774960] ffffc90000d3bc68 ffffffffa91a44f4 0000000000000001 0000000000000001 [ 681.774962] Call Trace: [ 681.774967] [<ffffffffa95d2810>] dump_stack+0x4c/0x7f [ 681.774970] [<ffffffffa91a44f4>] report_size_overflow+0x34/0x50 [ 681.774972] [<ffffffffa94d17e2>] qdisc_tree_decrease_qlen+0x152/0x160 [ 681.774976] [<ffffffffc02694b1>] fq_codel_dequeue+0x7b1/0x820 [sch_fq_codel] [ 681.774978] [<ffffffffc02680a0>] ? qdisc_peek_dequeued+0xa0/0xa0 [sch_fq_codel] [ 681.774980] [<ffffffffa94cd92d>] __qdisc_run+0x4d/0x1d0 [ 681.774983] [<ffffffffa949b2b2>] net_tx_action+0xc2/0x160 [ 681.774985] [<ffffffffa90664c1>] __do_softirq+0xf1/0x200 [ 681.774987] [<ffffffffa90665ee>] run_ksoftirqd+0x1e/0x30 [ 681.774989] [<ffffffffa90896b0>] smpboot_thread_fn+0x150/0x260 [ 681.774991] [<ffffffffa9089560>] ? sort_range+0x40/0x40 [ 681.774992] [<ffffffffa9085fe4>] kthread+0xe4/0x100 [ 681.774994] [<ffffffffa9085f00>] ? kthread_worker_fn+0x170/0x170 [ 681.774995] [<ffffffffa95d8d1e>] ret_from_fork+0x3e/0x70 mq/mqprio have their own ways to report qlen/drops by folding stats on all their queues, with appropriate locking. A second problem is that qdisc_tree_decrease_qlen() calls qdisc_lookup() without proper locking : concurrent qdisc updates could corrupt the list that qdisc_match_from_root() parses to find a qdisc given its handle. Fix first problem adding a TCQ_F_NOPARENT qdisc flag that qdisc_tree_decrease_qlen() can use to abort its tree traversal, as soon as it meets a mq/mqprio qdisc children. Second problem can be fixed by RCU protection. Qdisc are already freed after RCU grace period, so qdisc_list_add() and qdisc_list_del() simply have to use appropriate rcu list variants. A future patch will add a per struct netdev_queue list anchor, so that qdisc_tree_decrease_qlen() can have more efficient lookups. Reported-by: Daniele Fucini <dfucini@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <cwang@twopensource.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02 11:08:51 +07:00
qdisc->flags |= TCQ_F_ONETXQUEUE | TCQ_F_NOPARENT;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
}
/* If the mqprio options indicate that hardware should own
* the queue mapping then run ndo_setup_tc otherwise use the
* supplied and verified mapping
*/
if (qopt->hw) {
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
struct tc_mqprio_qopt_offload mqprio = {.qopt = *qopt};
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
switch (priv->mode) {
case TC_MQPRIO_MODE_DCB:
if (priv->shaper != TC_MQPRIO_SHAPER_DCB)
return -EINVAL;
break;
case TC_MQPRIO_MODE_CHANNEL:
mqprio.flags = priv->flags;
if (priv->flags & TC_MQPRIO_F_MODE)
mqprio.mode = priv->mode;
if (priv->flags & TC_MQPRIO_F_SHAPER)
mqprio.shaper = priv->shaper;
if (priv->flags & TC_MQPRIO_F_MIN_RATE)
for (i = 0; i < mqprio.qopt.num_tc; i++)
mqprio.min_rate[i] = priv->min_rate[i];
if (priv->flags & TC_MQPRIO_F_MAX_RATE)
for (i = 0; i < mqprio.qopt.num_tc; i++)
mqprio.max_rate[i] = priv->max_rate[i];
break;
default:
return -EINVAL;
}
err = dev->netdev_ops->ndo_setup_tc(dev,
TC_SETUP_QDISC_MQPRIO,
&mqprio);
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
if (err)
net_sched: fix error recovery at qdisc creation Dmitry reported uses after free in qdisc code [1] The problem here is that ops->init() can return an error. qdisc_create_dflt() then call ops->destroy(), while qdisc_create() does _not_ call it. Four qdisc chose to call their own ops->destroy(), assuming their caller would not. This patch makes sure qdisc_create() calls ops->destroy() and fixes the four qdisc to avoid double free. [1] BUG: KASAN: use-after-free in mq_destroy+0x242/0x290 net/sched/sch_mq.c:33 at addr ffff8801d415d440 Read of size 8 by task syz-executor2/5030 CPU: 0 PID: 5030 Comm: syz-executor2 Not tainted 4.3.5-smp-DEV #119 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000046 ffff8801b435b870 ffffffff81bbbed4 ffff8801db000400 ffff8801d415d440 ffff8801d415dc40 ffff8801c4988510 ffff8801b435b898 ffffffff816682b1 ffff8801b435b928 ffff8801d415d440 ffff8801c49880c0 Call Trace: [<ffffffff81bbbed4>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81bbbed4>] dump_stack+0x6c/0x98 lib/dump_stack.c:51 [<ffffffff816682b1>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158 [<ffffffff81668524>] print_address_description mm/kasan/report.c:196 [inline] [<ffffffff81668524>] kasan_report_error+0x1b4/0x4b0 mm/kasan/report.c:285 [<ffffffff81668953>] kasan_report mm/kasan/report.c:305 [inline] [<ffffffff81668953>] __asan_report_load8_noabort+0x43/0x50 mm/kasan/report.c:326 [<ffffffff82527b02>] mq_destroy+0x242/0x290 net/sched/sch_mq.c:33 [<ffffffff82524bdd>] qdisc_destroy+0x12d/0x290 net/sched/sch_generic.c:953 [<ffffffff82524e30>] qdisc_create_dflt+0xf0/0x120 net/sched/sch_generic.c:848 [<ffffffff8252550d>] attach_default_qdiscs net/sched/sch_generic.c:1029 [inline] [<ffffffff8252550d>] dev_activate+0x6ad/0x880 net/sched/sch_generic.c:1064 [<ffffffff824b1db1>] __dev_open+0x221/0x320 net/core/dev.c:1403 [<ffffffff824b24ce>] __dev_change_flags+0x15e/0x3e0 net/core/dev.c:6858 [<ffffffff824b27de>] dev_change_flags+0x8e/0x140 net/core/dev.c:6926 [<ffffffff824f5bf6>] dev_ifsioc+0x446/0x890 net/core/dev_ioctl.c:260 [<ffffffff824f61fa>] dev_ioctl+0x1ba/0xb80 net/core/dev_ioctl.c:546 [<ffffffff82430509>] sock_do_ioctl+0x99/0xb0 net/socket.c:879 [<ffffffff82430d30>] sock_ioctl+0x2a0/0x390 net/socket.c:958 [<ffffffff816f3b68>] vfs_ioctl fs/ioctl.c:44 [inline] [<ffffffff816f3b68>] do_vfs_ioctl+0x8a8/0xe50 fs/ioctl.c:611 [<ffffffff816f41a4>] SYSC_ioctl fs/ioctl.c:626 [inline] [<ffffffff816f41a4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:617 [<ffffffff8123e357>] entry_SYSCALL_64_fastpath+0x12/0x17 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-11 01:31:49 +07:00
return err;
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
priv->hw_offload = mqprio.qopt.hw;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
} else {
netdev_set_num_tc(dev, qopt->num_tc);
for (i = 0; i < qopt->num_tc; i++)
netdev_set_tc_queue(dev, i,
qopt->count[i], qopt->offset[i]);
}
/* Always use supplied priority mappings */
for (i = 0; i < TC_BITMASK + 1; i++)
netdev_set_prio_tc_map(dev, i, qopt->prio_tc_map[i]);
sch->flags |= TCQ_F_MQROOT;
return 0;
}
static void mqprio_attach(struct Qdisc *sch)
{
struct net_device *dev = qdisc_dev(sch);
struct mqprio_sched *priv = qdisc_priv(sch);
struct Qdisc *qdisc, *old;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
unsigned int ntx;
/* Attach underlying qdisc */
for (ntx = 0; ntx < dev->num_tx_queues; ntx++) {
qdisc = priv->qdiscs[ntx];
old = dev_graft_qdisc(qdisc->dev_queue, qdisc);
if (old)
qdisc_put(old);
if (ntx < dev->real_num_tx_queues)
qdisc_hash_add(qdisc, false);
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
}
kfree(priv->qdiscs);
priv->qdiscs = NULL;
}
static struct netdev_queue *mqprio_queue_get(struct Qdisc *sch,
unsigned long cl)
{
struct net_device *dev = qdisc_dev(sch);
unsigned long ntx = cl - 1;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
if (ntx >= dev->num_tx_queues)
return NULL;
return netdev_get_tx_queue(dev, ntx);
}
static int mqprio_graft(struct Qdisc *sch, unsigned long cl, struct Qdisc *new,
struct Qdisc **old, struct netlink_ext_ack *extack)
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
{
struct net_device *dev = qdisc_dev(sch);
struct netdev_queue *dev_queue = mqprio_queue_get(sch, cl);
if (!dev_queue)
return -EINVAL;
if (dev->flags & IFF_UP)
dev_deactivate(dev);
*old = dev_graft_qdisc(dev_queue, new);
if (new)
net_sched: fix qdisc_tree_decrease_qlen() races qdisc_tree_decrease_qlen() suffers from two problems on multiqueue devices. One problem is that it updates sch->q.qlen and sch->qstats.drops on the mq/mqprio root qdisc, while it should not : Daniele reported underflows errors : [ 681.774821] PAX: sch->q.qlen: 0 n: 1 [ 681.774825] PAX: size overflow detected in function qdisc_tree_decrease_qlen net/sched/sch_api.c:769 cicus.693_49 min, count: 72, decl: qlen; num: 0; context: sk_buff_head; [ 681.774954] CPU: 2 PID: 19 Comm: ksoftirqd/2 Tainted: G O 4.2.6.201511282239-1-grsec #1 [ 681.774955] Hardware name: ASUSTeK COMPUTER INC. X302LJ/X302LJ, BIOS X302LJ.202 03/05/2015 [ 681.774956] ffffffffa9a04863 0000000000000000 0000000000000000 ffffffffa990ff7c [ 681.774959] ffffc90000d3bc38 ffffffffa95d2810 0000000000000007 ffffffffa991002b [ 681.774960] ffffc90000d3bc68 ffffffffa91a44f4 0000000000000001 0000000000000001 [ 681.774962] Call Trace: [ 681.774967] [<ffffffffa95d2810>] dump_stack+0x4c/0x7f [ 681.774970] [<ffffffffa91a44f4>] report_size_overflow+0x34/0x50 [ 681.774972] [<ffffffffa94d17e2>] qdisc_tree_decrease_qlen+0x152/0x160 [ 681.774976] [<ffffffffc02694b1>] fq_codel_dequeue+0x7b1/0x820 [sch_fq_codel] [ 681.774978] [<ffffffffc02680a0>] ? qdisc_peek_dequeued+0xa0/0xa0 [sch_fq_codel] [ 681.774980] [<ffffffffa94cd92d>] __qdisc_run+0x4d/0x1d0 [ 681.774983] [<ffffffffa949b2b2>] net_tx_action+0xc2/0x160 [ 681.774985] [<ffffffffa90664c1>] __do_softirq+0xf1/0x200 [ 681.774987] [<ffffffffa90665ee>] run_ksoftirqd+0x1e/0x30 [ 681.774989] [<ffffffffa90896b0>] smpboot_thread_fn+0x150/0x260 [ 681.774991] [<ffffffffa9089560>] ? sort_range+0x40/0x40 [ 681.774992] [<ffffffffa9085fe4>] kthread+0xe4/0x100 [ 681.774994] [<ffffffffa9085f00>] ? kthread_worker_fn+0x170/0x170 [ 681.774995] [<ffffffffa95d8d1e>] ret_from_fork+0x3e/0x70 mq/mqprio have their own ways to report qlen/drops by folding stats on all their queues, with appropriate locking. A second problem is that qdisc_tree_decrease_qlen() calls qdisc_lookup() without proper locking : concurrent qdisc updates could corrupt the list that qdisc_match_from_root() parses to find a qdisc given its handle. Fix first problem adding a TCQ_F_NOPARENT qdisc flag that qdisc_tree_decrease_qlen() can use to abort its tree traversal, as soon as it meets a mq/mqprio qdisc children. Second problem can be fixed by RCU protection. Qdisc are already freed after RCU grace period, so qdisc_list_add() and qdisc_list_del() simply have to use appropriate rcu list variants. A future patch will add a per struct netdev_queue list anchor, so that qdisc_tree_decrease_qlen() can have more efficient lookups. Reported-by: Daniele Fucini <dfucini@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <cwang@twopensource.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02 11:08:51 +07:00
new->flags |= TCQ_F_ONETXQUEUE | TCQ_F_NOPARENT;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
if (dev->flags & IFF_UP)
dev_activate(dev);
return 0;
}
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
static int dump_rates(struct mqprio_sched *priv,
struct tc_mqprio_qopt *opt, struct sk_buff *skb)
{
struct nlattr *nest;
int i;
if (priv->flags & TC_MQPRIO_F_MIN_RATE) {
nest = nla_nest_start_noflag(skb, TCA_MQPRIO_MIN_RATE64);
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
if (!nest)
goto nla_put_failure;
for (i = 0; i < opt->num_tc; i++) {
if (nla_put(skb, TCA_MQPRIO_MIN_RATE64,
sizeof(priv->min_rate[i]),
&priv->min_rate[i]))
goto nla_put_failure;
}
nla_nest_end(skb, nest);
}
if (priv->flags & TC_MQPRIO_F_MAX_RATE) {
nest = nla_nest_start_noflag(skb, TCA_MQPRIO_MAX_RATE64);
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
if (!nest)
goto nla_put_failure;
for (i = 0; i < opt->num_tc; i++) {
if (nla_put(skb, TCA_MQPRIO_MAX_RATE64,
sizeof(priv->max_rate[i]),
&priv->max_rate[i]))
goto nla_put_failure;
}
nla_nest_end(skb, nest);
}
return 0;
nla_put_failure:
nla_nest_cancel(skb, nest);
return -1;
}
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
static int mqprio_dump(struct Qdisc *sch, struct sk_buff *skb)
{
struct net_device *dev = qdisc_dev(sch);
struct mqprio_sched *priv = qdisc_priv(sch);
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
struct nlattr *nla = (struct nlattr *)skb_tail_pointer(skb);
struct tc_mqprio_qopt opt = { 0 };
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
struct Qdisc *qdisc;
unsigned int ntx, tc;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
sch->q.qlen = 0;
memset(&sch->bstats, 0, sizeof(sch->bstats));
memset(&sch->qstats, 0, sizeof(sch->qstats));
/* MQ supports lockless qdiscs. However, statistics accounting needs
* to account for all, none, or a mix of locked and unlocked child
* qdiscs. Percpu stats are added to counters in-band and locking
* qdisc totals are added at end.
*/
for (ntx = 0; ntx < dev->num_tx_queues; ntx++) {
qdisc = netdev_get_tx_queue(dev, ntx)->qdisc_sleeping;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
spin_lock_bh(qdisc_lock(qdisc));
if (qdisc_is_percpu_stats(qdisc)) {
__u32 qlen = qdisc_qlen_sum(qdisc);
__gnet_stats_copy_basic(NULL, &sch->bstats,
qdisc->cpu_bstats,
&qdisc->bstats);
__gnet_stats_copy_queue(&sch->qstats,
qdisc->cpu_qstats,
&qdisc->qstats, qlen);
} else {
sch->q.qlen += qdisc->q.qlen;
sch->bstats.bytes += qdisc->bstats.bytes;
sch->bstats.packets += qdisc->bstats.packets;
sch->qstats.backlog += qdisc->qstats.backlog;
sch->qstats.drops += qdisc->qstats.drops;
sch->qstats.requeues += qdisc->qstats.requeues;
sch->qstats.overlimits += qdisc->qstats.overlimits;
}
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
spin_unlock_bh(qdisc_lock(qdisc));
}
opt.num_tc = netdev_get_num_tc(dev);
memcpy(opt.prio_tc_map, dev->prio_tc_map, sizeof(opt.prio_tc_map));
opt.hw = priv->hw_offload;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
for (tc = 0; tc < netdev_get_num_tc(dev); tc++) {
opt.count[tc] = dev->tc_to_txq[tc].count;
opt.offset[tc] = dev->tc_to_txq[tc].offset;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
}
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
if (nla_put(skb, TCA_OPTIONS, NLA_ALIGN(sizeof(opt)), &opt))
goto nla_put_failure;
if ((priv->flags & TC_MQPRIO_F_MODE) &&
nla_put_u16(skb, TCA_MQPRIO_MODE, priv->mode))
goto nla_put_failure;
if ((priv->flags & TC_MQPRIO_F_SHAPER) &&
nla_put_u16(skb, TCA_MQPRIO_SHAPER, priv->shaper))
goto nla_put_failure;
if ((priv->flags & TC_MQPRIO_F_MIN_RATE ||
priv->flags & TC_MQPRIO_F_MAX_RATE) &&
(dump_rates(priv, &opt, skb) != 0))
goto nla_put_failure;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
return nla_nest_end(skb, nla);
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
nla_put_failure:
mqprio: Introduce new hardware offload mode and shaper in mqprio The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-07 18:00:06 +07:00
nlmsg_trim(skb, nla);
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
return -1;
}
static struct Qdisc *mqprio_leaf(struct Qdisc *sch, unsigned long cl)
{
struct netdev_queue *dev_queue = mqprio_queue_get(sch, cl);
if (!dev_queue)
return NULL;
return dev_queue->qdisc_sleeping;
}
static unsigned long mqprio_find(struct Qdisc *sch, u32 classid)
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
{
struct net_device *dev = qdisc_dev(sch);
unsigned int ntx = TC_H_MIN(classid);
/* There are essentially two regions here that have valid classid
* values. The first region will have a classid value of 1 through
* num_tx_queues. All of these are backed by actual Qdiscs.
*/
if (ntx < TC_H_MIN_PRIORITY)
return (ntx <= dev->num_tx_queues) ? ntx : 0;
/* The second region represents the hardware traffic classes. These
* are represented by classid values of TC_H_MIN_PRIORITY through
* TC_H_MIN_PRIORITY + netdev_get_num_tc - 1
*/
return ((ntx - TC_H_MIN_PRIORITY) < netdev_get_num_tc(dev)) ? ntx : 0;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
}
static int mqprio_dump_class(struct Qdisc *sch, unsigned long cl,
struct sk_buff *skb, struct tcmsg *tcm)
{
if (cl < TC_H_MIN_PRIORITY) {
struct netdev_queue *dev_queue = mqprio_queue_get(sch, cl);
struct net_device *dev = qdisc_dev(sch);
int tc = netdev_txq_to_tc(dev, cl - 1);
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
tcm->tcm_parent = (tc < 0) ? 0 :
TC_H_MAKE(TC_H_MAJ(sch->handle),
TC_H_MIN(tc + TC_H_MIN_PRIORITY));
tcm->tcm_info = dev_queue->qdisc_sleeping->handle;
} else {
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
tcm->tcm_parent = TC_H_ROOT;
tcm->tcm_info = 0;
}
tcm->tcm_handle |= TC_H_MIN(cl);
return 0;
}
static int mqprio_dump_class_stats(struct Qdisc *sch, unsigned long cl,
struct gnet_dump *d)
__releases(d->lock)
__acquires(d->lock)
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
{
if (cl >= TC_H_MIN_PRIORITY) {
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
int i;
__u32 qlen = 0;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
struct gnet_stats_queue qstats = {0};
struct gnet_stats_basic_packed bstats = {0};
struct net_device *dev = qdisc_dev(sch);
struct netdev_tc_txq tc = dev->tc_to_txq[cl & TC_BITMASK];
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
/* Drop lock here it will be reclaimed before touching
* statistics this is required because the d->lock we
* hold here is the look on dev_queue->qdisc_sleeping
* also acquired below.
*/
if (d->lock)
spin_unlock_bh(d->lock);
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
for (i = tc.offset; i < tc.offset + tc.count; i++) {
struct netdev_queue *q = netdev_get_tx_queue(dev, i);
struct Qdisc *qdisc = rtnl_dereference(q->qdisc);
struct gnet_stats_basic_cpu __percpu *cpu_bstats = NULL;
struct gnet_stats_queue __percpu *cpu_qstats = NULL;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
spin_lock_bh(qdisc_lock(qdisc));
if (qdisc_is_percpu_stats(qdisc)) {
cpu_bstats = qdisc->cpu_bstats;
cpu_qstats = qdisc->cpu_qstats;
}
qlen = qdisc_qlen_sum(qdisc);
__gnet_stats_copy_basic(NULL, &sch->bstats,
cpu_bstats, &qdisc->bstats);
__gnet_stats_copy_queue(&sch->qstats,
cpu_qstats,
&qdisc->qstats,
qlen);
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
spin_unlock_bh(qdisc_lock(qdisc));
}
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
/* Reclaim root sleeping lock before completing stats */
if (d->lock)
spin_lock_bh(d->lock);
if (gnet_stats_copy_basic(NULL, d, NULL, &bstats) < 0 ||
gnet_stats_copy_queue(d, NULL, &qstats, qlen) < 0)
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
return -1;
} else {
struct netdev_queue *dev_queue = mqprio_queue_get(sch, cl);
sch = dev_queue->qdisc_sleeping;
if (gnet_stats_copy_basic(qdisc_root_sleeping_running(sch),
d, NULL, &sch->bstats) < 0 ||
qdisc_qstats_copy(d, sch) < 0)
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
return -1;
}
return 0;
}
static void mqprio_walk(struct Qdisc *sch, struct qdisc_walker *arg)
{
struct net_device *dev = qdisc_dev(sch);
unsigned long ntx;
if (arg->stop)
return;
/* Walk hierarchy with a virtual class per tc */
arg->count = arg->skip;
for (ntx = arg->skip; ntx < netdev_get_num_tc(dev); ntx++) {
if (arg->fn(sch, ntx + TC_H_MIN_PRIORITY, arg) < 0) {
arg->stop = 1;
return;
}
arg->count++;
}
/* Pad the values and skip over unused traffic classes */
if (ntx < TC_MAX_QUEUE) {
arg->count = TC_MAX_QUEUE;
ntx = TC_MAX_QUEUE;
}
/* Reset offset, sort out remaining per-queue qdiscs */
for (ntx -= TC_MAX_QUEUE; ntx < dev->num_tx_queues; ntx++) {
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
if (arg->fn(sch, ntx + 1, arg) < 0) {
arg->stop = 1;
return;
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
}
arg->count++;
}
}
static struct netdev_queue *mqprio_select_queue(struct Qdisc *sch,
struct tcmsg *tcm)
{
return mqprio_queue_get(sch, TC_H_MIN(tcm->tcm_parent));
}
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
static const struct Qdisc_class_ops mqprio_class_ops = {
.graft = mqprio_graft,
.leaf = mqprio_leaf,
.find = mqprio_find,
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
.walk = mqprio_walk,
.dump = mqprio_dump_class,
.dump_stats = mqprio_dump_class_stats,
.select_queue = mqprio_select_queue,
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
};
static struct Qdisc_ops mqprio_qdisc_ops __read_mostly = {
net_sched: implement a root container qdisc sch_mqprio This implements a mqprio queueing discipline that by default creates a pfifo_fast qdisc per tx queue and provides the needed configuration interface. Using the mqprio qdisc the number of tcs currently in use along with the range of queues alloted to each class can be configured. By default skbs are mapped to traffic classes using the skb priority. This mapping is configurable. Configurable parameters, struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_BITMASK + 1]; __u8 hw; __u16 count[TC_MAX_QUEUE]; __u16 offset[TC_MAX_QUEUE]; }; Here the count/offset pairing give the queue alignment and the prio_tc_map gives the mapping from skb->priority to tc. The hw bit determines if the hardware should configure the count and offset values. If the hardware bit is set then the operation will fail if the hardware does not implement the ndo_setup_tc operation. This is to avoid undetermined states where the hardware may or may not control the queue mapping. Also minimal bounds checking is done on the count/offset to verify a queue does not exceed num_tx_queues and that queue ranges do not overlap. Otherwise it is left to user policy or hardware configuration to create useful mappings. It is expected that hardware QOS schemes can be implemented by creating appropriate mappings of queues in ndo_tc_setup(). One expected use case is drivers will use the ndo_setup_tc to map queue ranges onto 802.1Q traffic classes. This provides a generic mechanism to map network traffic onto these traffic classes and removes the need for lower layer drivers to know specifics about traffic types. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 15:06:09 +07:00
.cl_ops = &mqprio_class_ops,
.id = "mqprio",
.priv_size = sizeof(struct mqprio_sched),
.init = mqprio_init,
.destroy = mqprio_destroy,
.attach = mqprio_attach,
.dump = mqprio_dump,
.owner = THIS_MODULE,
};
static int __init mqprio_module_init(void)
{
return register_qdisc(&mqprio_qdisc_ops);
}
static void __exit mqprio_module_exit(void)
{
unregister_qdisc(&mqprio_qdisc_ops);
}
module_init(mqprio_module_init);
module_exit(mqprio_module_exit);
MODULE_LICENSE("GPL");