linux_dsm_epyc7002/mm/oom_kill.c

1074 lines
28 KiB
C
Raw Normal View History

/*
* linux/mm/oom_kill.c
*
* Copyright (C) 1998,2000 Rik van Riel
* Thanks go out to Claus Fischer for some serious inspiration and
* for goading me into coding this file...
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
* Copyright (C) 2010 Google, Inc.
* Rewritten by David Rientjes
*
* The routines in this file are used to kill a process when
[PATCH] cpusets: oom_kill tweaks This patch series extends the use of the cpuset attribute 'mem_exclusive' to support cpuset configurations that: 1) allow GFP_KERNEL allocations to come from a potentially larger set of memory nodes than GFP_USER allocations, and 2) can constrain the oom killer to tasks running in cpusets in a specified subtree of the cpuset hierarchy. Here's an example usage scenario. For a few hours or more, a large NUMA system at a University is to be divided in two halves, with a bunch of student jobs running in half the system under some form of batch manager, and with a big research project running in the other half. Each of the student jobs is placed in a small cpuset, but should share the classic Unix time share facilities, such as buffered pages of files in /bin and /usr/lib. The big research project wants no interference whatsoever from the student jobs, and has highly tuned, unusual memory and i/o patterns that intend to make full use of all the main memory on the nodes available to it. In this example, we have two big sibling cpusets, one of which is further divided into a more dynamic set of child cpusets. We want kernel memory allocations constrained by the two big cpusets, and user allocations constrained by the smaller child cpusets where present. And we require that the oom killer not operate across the two halves of this system, or else the first time a student job runs amuck, the big research project will likely be first inline to get shot. Tweaking /proc/<pid>/oom_adj is not ideal -- if the big research project really does run amuck allocating memory, it should be shot, not some other task outside the research projects mem_exclusive cpuset. I propose to extend the use of the 'mem_exclusive' flag of cpusets to manage such scenarios. Let memory allocations for user space (GFP_USER) be constrained by a tasks current cpuset, but memory allocations for kernel space (GFP_KERNEL) by constrained by the nearest mem_exclusive ancestor of the current cpuset, even though kernel space allocations will still _prefer_ to remain within the current tasks cpuset, if memory is easily available. Let the oom killer be constrained to consider only tasks that are in overlapping mem_exclusive cpusets (it won't help much to kill a task that normally cannot allocate memory on any of the same nodes as the ones on which the current task can allocate.) The current constraints imposed on setting mem_exclusive are unchanged. A cpuset may only be mem_exclusive if its parent is also mem_exclusive, and a mem_exclusive cpuset may not overlap any of its siblings memory nodes. This patch was presented on linux-mm in early July 2005, though did not generate much feedback at that time. It has been built for a variety of arch's using cross tools, and built, booted and tested for function on SN2 (ia64). There are 4 patches in this set: 1) Some minor cleanup, and some improvements to the code layout of one routine to make subsequent patches cleaner. 2) Add another GFP flag - __GFP_HARDWALL. It marks memory requests for USER space, which are tightly confined by the current tasks cpuset. 3) Now memory requests (such as KERNEL) that not marked HARDWALL can if short on memory, look in the potentially larger pool of memory defined by the nearest mem_exclusive ancestor cpuset of the current tasks cpuset. 4) Finally, modify the oom killer to skip any task whose mem_exclusive cpuset doesn't overlap ours. Patch (1), the one time I looked on an SN2 (ia64) build, actually saved 32 bytes of kernel text space. Patch (2) has no affect on the size of kernel text space (it just adds a preprocessor flag). Patches (3) and (4) added about 600 bytes each of kernel text space, mostly in kernel/cpuset.c, which matters only if CONFIG_CPUSET is enabled. This patch: This patch applies a few comment and code cleanups to mm/oom_kill.c prior to applying a few small patches to improve cpuset management of memory placement. The comment changed in oom_kill.c was seriously misleading. The code layout change in select_bad_process() makes room for adding another condition on which a process can be spared the oom killer (see the subsequent cpuset_nodes_overlap patch for this addition). Also a couple typos and spellos that bugged me, while I was here. This patch should have no material affect. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:09 +07:00
* we're seriously out of memory. This gets called from __alloc_pages()
* in mm/page_alloc.c when we really run out of memory.
*
* Since we won't call these routines often (on a well-configured
* machine) this file will double as a 'coding guide' and a signpost
* for newbie kernel hackers. It features several pointers to major
* kernel subsystems and hints as to where to find out what things do.
*/
#include <linux/oom.h>
#include <linux/mm.h>
Remove fs.h from mm.h Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30 05:36:13 +07:00
#include <linux/err.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/sched/mm.h>
#include <linux/sched/coredump.h>
#include <linux/sched/task.h>
#include <linux/swap.h>
#include <linux/timex.h>
#include <linux/jiffies.h>
#include <linux/cpuset.h>
#include <linux/export.h>
#include <linux/notifier.h>
#include <linux/memcontrol.h>
#include <linux/mempolicy.h>
security: Fix setting of PF_SUPERPRIV by __capable() Fix the setting of PF_SUPERPRIV by __capable() as it could corrupt the flags the target process if that is not the current process and it is trying to change its own flags in a different way at the same time. __capable() is using neither atomic ops nor locking to protect t->flags. This patch removes __capable() and introduces has_capability() that doesn't set PF_SUPERPRIV on the process being queried. This patch further splits security_ptrace() in two: (1) security_ptrace_may_access(). This passes judgement on whether one process may access another only (PTRACE_MODE_ATTACH for ptrace() and PTRACE_MODE_READ for /proc), and takes a pointer to the child process. current is the parent. (2) security_ptrace_traceme(). This passes judgement on PTRACE_TRACEME only, and takes only a pointer to the parent process. current is the child. In Smack and commoncap, this uses has_capability() to determine whether the parent will be permitted to use PTRACE_ATTACH if normal checks fail. This does not set PF_SUPERPRIV. Two of the instances of __capable() actually only act on current, and so have been changed to calls to capable(). Of the places that were using __capable(): (1) The OOM killer calls __capable() thrice when weighing the killability of a process. All of these now use has_capability(). (2) cap_ptrace() and smack_ptrace() were using __capable() to check to see whether the parent was allowed to trace any process. As mentioned above, these have been split. For PTRACE_ATTACH and /proc, capable() is now used, and for PTRACE_TRACEME, has_capability() is used. (3) cap_safe_nice() only ever saw current, so now uses capable(). (4) smack_setprocattr() rejected accesses to tasks other than current just after calling __capable(), so the order of these two tests have been switched and capable() is used instead. (5) In smack_file_send_sigiotask(), we need to allow privileged processes to receive SIGIO on files they're manipulating. (6) In smack_task_wait(), we let a process wait for a privileged process, whether or not the process doing the waiting is privileged. I've tested this with the LTP SELinux and syscalls testscripts. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Andrew G. Morgan <morgan@kernel.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-14 17:37:28 +07:00
#include <linux/security.h>
oom: avoid deferring oom killer if exiting task is being traced The oom killer naturally defers killing anything if it finds an eligible task that is already exiting and has yet to detach its ->mm. This avoids unnecessarily killing tasks when one is already in the exit path and may free enough memory that the oom killer is no longer needed. This is detected by PF_EXITING since threads that have already detached its ->mm are no longer considered at all. The problem with always deferring when a thread is PF_EXITING, however, is that it may never actually exit when being traced, specifically if another task is tracing it with PTRACE_O_TRACEEXIT. The oom killer does not want to defer in this case since there is no guarantee that thread will ever exit without intervention. This patch will now only defer the oom killer when a thread is PF_EXITING and no ptracer has stopped its progress in the exit path. It also ensures that a child is sacrificed for the chosen parent only if it has a different ->mm as the comment implies: this ensures that the thread group leader is always targeted appropriately. Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: <stable@kernel.org> [2.6.38.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 06:30:12 +07:00
#include <linux/ptrace.h>
#include <linux/freezer.h>
tracepoint: add tracepoints for debugging oom_score_adj oom_score_adj is used for guarding processes from OOM-Killer. One of problem is that it's inherited at fork(). When a daemon set oom_score_adj and make children, it's hard to know where the value is set. This patch adds some tracepoints useful for debugging. This patch adds 3 trace points. - creating new task - renaming a task (exec) - set oom_score_adj To debug, users need to enable some trace pointer. Maybe filtering is useful as # EVENT=/sys/kernel/debug/tracing/events/task/ # echo "oom_score_adj != 0" > $EVENT/task_newtask/filter # echo "oom_score_adj != 0" > $EVENT/task_rename/filter # echo 1 > $EVENT/enable # EVENT=/sys/kernel/debug/tracing/events/oom/ # echo 1 > $EVENT/enable output will be like this. # grep oom /sys/kernel/debug/tracing/trace bash-7699 [007] d..3 5140.744510: oom_score_adj_update: pid=7699 comm=bash oom_score_adj=-1000 bash-7699 [007] ...1 5151.818022: task_newtask: pid=7729 comm=bash clone_flags=1200011 oom_score_adj=-1000 ls-7729 [003] ...2 5151.818504: task_rename: pid=7729 oldcomm=bash newcomm=ls oom_score_adj=-1000 bash-7699 [002] ...1 5175.701468: task_newtask: pid=7730 comm=bash clone_flags=1200011 oom_score_adj=-1000 grep-7730 [007] ...2 5175.701993: task_rename: pid=7730 oldcomm=bash newcomm=grep oom_score_adj=-1000 Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:08:09 +07:00
#include <linux/ftrace.h>
#include <linux/ratelimit.h>
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
#include <linux/kthread.h>
#include <linux/init.h>
#include <asm/tlb.h>
#include "internal.h"
tracepoint: add tracepoints for debugging oom_score_adj oom_score_adj is used for guarding processes from OOM-Killer. One of problem is that it's inherited at fork(). When a daemon set oom_score_adj and make children, it's hard to know where the value is set. This patch adds some tracepoints useful for debugging. This patch adds 3 trace points. - creating new task - renaming a task (exec) - set oom_score_adj To debug, users need to enable some trace pointer. Maybe filtering is useful as # EVENT=/sys/kernel/debug/tracing/events/task/ # echo "oom_score_adj != 0" > $EVENT/task_newtask/filter # echo "oom_score_adj != 0" > $EVENT/task_rename/filter # echo 1 > $EVENT/enable # EVENT=/sys/kernel/debug/tracing/events/oom/ # echo 1 > $EVENT/enable output will be like this. # grep oom /sys/kernel/debug/tracing/trace bash-7699 [007] d..3 5140.744510: oom_score_adj_update: pid=7699 comm=bash oom_score_adj=-1000 bash-7699 [007] ...1 5151.818022: task_newtask: pid=7729 comm=bash clone_flags=1200011 oom_score_adj=-1000 ls-7729 [003] ...2 5151.818504: task_rename: pid=7729 oldcomm=bash newcomm=ls oom_score_adj=-1000 bash-7699 [002] ...1 5175.701468: task_newtask: pid=7730 comm=bash clone_flags=1200011 oom_score_adj=-1000 grep-7730 [007] ...2 5175.701993: task_rename: pid=7730 oldcomm=bash newcomm=grep oom_score_adj=-1000 Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:08:09 +07:00
#define CREATE_TRACE_POINTS
#include <trace/events/oom.h>
int sysctl_panic_on_oom;
int sysctl_oom_kill_allocating_task;
int sysctl_oom_dump_tasks = 1;
DEFINE_MUTEX(oom_lock);
#ifdef CONFIG_NUMA
/**
* has_intersects_mems_allowed() - check task eligiblity for kill
* @start: task struct of which task to consider
* @mask: nodemask passed to page allocator for mempolicy ooms
*
* Task eligibility is determined by whether or not a candidate task, @tsk,
* shares the same mempolicy nodes as current if it is bound by such a policy
* and whether or not it has the same set of allowed cpuset nodes.
*/
static bool has_intersects_mems_allowed(struct task_struct *start,
const nodemask_t *mask)
{
struct task_struct *tsk;
bool ret = false;
rcu_read_lock();
for_each_thread(start, tsk) {
if (mask) {
/*
* If this is a mempolicy constrained oom, tsk's
* cpuset is irrelevant. Only return true if its
* mempolicy intersects current, otherwise it may be
* needlessly killed.
*/
ret = mempolicy_nodemask_intersects(tsk, mask);
} else {
/*
* This is not a mempolicy constrained oom, so only
* check the mems of tsk's cpuset.
*/
ret = cpuset_mems_allowed_intersects(current, tsk);
}
if (ret)
break;
}
rcu_read_unlock();
return ret;
}
#else
static bool has_intersects_mems_allowed(struct task_struct *tsk,
const nodemask_t *mask)
{
return true;
}
#endif /* CONFIG_NUMA */
/*
* The process p may have detached its own ->mm while exiting or through
* use_mm(), but one or more of its subthreads may still have a valid
* pointer. Return p, or any of its subthreads with a valid ->mm, with
* task_lock() held.
*/
struct task_struct *find_lock_task_mm(struct task_struct *p)
oom: introduce find_lock_task_mm() to fix !mm false positives Almost all ->mm == NULL checks in oom_kill.c are wrong. The current code assumes that the task without ->mm has already released its memory and ignores the process. However this is not necessarily true when this process is multithreaded, other live sub-threads can use this ->mm. - Remove the "if (!p->mm)" check in select_bad_process(), it is just wrong. - Add the new helper, find_lock_task_mm(), which finds the live thread which uses the memory and takes task_lock() to pin ->mm - change oom_badness() to use this helper instead of just checking ->mm != NULL. - As David pointed out, select_bad_process() must never choose the task without ->mm, but no matter what oom_badness() returns the task can be chosen if nothing else has been found yet. Change oom_badness() to return int, change it to return -1 if find_lock_task_mm() fails, and change select_bad_process() to check points >= 0. Note! This patch is not enough, we need more changes. - oom_badness() was fixed, but oom_kill_task() still ignores the task without ->mm - oom_forkbomb_penalty() should use find_lock_task_mm() too, and it also needs other changes to actually find the first first-descendant children This will be addressed later. [kosaki.motohiro@jp.fujitsu.com: use in badness(), __oom_kill_task()] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:45 +07:00
{
struct task_struct *t;
oom: introduce find_lock_task_mm() to fix !mm false positives Almost all ->mm == NULL checks in oom_kill.c are wrong. The current code assumes that the task without ->mm has already released its memory and ignores the process. However this is not necessarily true when this process is multithreaded, other live sub-threads can use this ->mm. - Remove the "if (!p->mm)" check in select_bad_process(), it is just wrong. - Add the new helper, find_lock_task_mm(), which finds the live thread which uses the memory and takes task_lock() to pin ->mm - change oom_badness() to use this helper instead of just checking ->mm != NULL. - As David pointed out, select_bad_process() must never choose the task without ->mm, but no matter what oom_badness() returns the task can be chosen if nothing else has been found yet. Change oom_badness() to return int, change it to return -1 if find_lock_task_mm() fails, and change select_bad_process() to check points >= 0. Note! This patch is not enough, we need more changes. - oom_badness() was fixed, but oom_kill_task() still ignores the task without ->mm - oom_forkbomb_penalty() should use find_lock_task_mm() too, and it also needs other changes to actually find the first first-descendant children This will be addressed later. [kosaki.motohiro@jp.fujitsu.com: use in badness(), __oom_kill_task()] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:45 +07:00
rcu_read_lock();
for_each_thread(p, t) {
oom: introduce find_lock_task_mm() to fix !mm false positives Almost all ->mm == NULL checks in oom_kill.c are wrong. The current code assumes that the task without ->mm has already released its memory and ignores the process. However this is not necessarily true when this process is multithreaded, other live sub-threads can use this ->mm. - Remove the "if (!p->mm)" check in select_bad_process(), it is just wrong. - Add the new helper, find_lock_task_mm(), which finds the live thread which uses the memory and takes task_lock() to pin ->mm - change oom_badness() to use this helper instead of just checking ->mm != NULL. - As David pointed out, select_bad_process() must never choose the task without ->mm, but no matter what oom_badness() returns the task can be chosen if nothing else has been found yet. Change oom_badness() to return int, change it to return -1 if find_lock_task_mm() fails, and change select_bad_process() to check points >= 0. Note! This patch is not enough, we need more changes. - oom_badness() was fixed, but oom_kill_task() still ignores the task without ->mm - oom_forkbomb_penalty() should use find_lock_task_mm() too, and it also needs other changes to actually find the first first-descendant children This will be addressed later. [kosaki.motohiro@jp.fujitsu.com: use in badness(), __oom_kill_task()] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:45 +07:00
task_lock(t);
if (likely(t->mm))
goto found;
oom: introduce find_lock_task_mm() to fix !mm false positives Almost all ->mm == NULL checks in oom_kill.c are wrong. The current code assumes that the task without ->mm has already released its memory and ignores the process. However this is not necessarily true when this process is multithreaded, other live sub-threads can use this ->mm. - Remove the "if (!p->mm)" check in select_bad_process(), it is just wrong. - Add the new helper, find_lock_task_mm(), which finds the live thread which uses the memory and takes task_lock() to pin ->mm - change oom_badness() to use this helper instead of just checking ->mm != NULL. - As David pointed out, select_bad_process() must never choose the task without ->mm, but no matter what oom_badness() returns the task can be chosen if nothing else has been found yet. Change oom_badness() to return int, change it to return -1 if find_lock_task_mm() fails, and change select_bad_process() to check points >= 0. Note! This patch is not enough, we need more changes. - oom_badness() was fixed, but oom_kill_task() still ignores the task without ->mm - oom_forkbomb_penalty() should use find_lock_task_mm() too, and it also needs other changes to actually find the first first-descendant children This will be addressed later. [kosaki.motohiro@jp.fujitsu.com: use in badness(), __oom_kill_task()] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:45 +07:00
task_unlock(t);
}
t = NULL;
found:
rcu_read_unlock();
oom: introduce find_lock_task_mm() to fix !mm false positives Almost all ->mm == NULL checks in oom_kill.c are wrong. The current code assumes that the task without ->mm has already released its memory and ignores the process. However this is not necessarily true when this process is multithreaded, other live sub-threads can use this ->mm. - Remove the "if (!p->mm)" check in select_bad_process(), it is just wrong. - Add the new helper, find_lock_task_mm(), which finds the live thread which uses the memory and takes task_lock() to pin ->mm - change oom_badness() to use this helper instead of just checking ->mm != NULL. - As David pointed out, select_bad_process() must never choose the task without ->mm, but no matter what oom_badness() returns the task can be chosen if nothing else has been found yet. Change oom_badness() to return int, change it to return -1 if find_lock_task_mm() fails, and change select_bad_process() to check points >= 0. Note! This patch is not enough, we need more changes. - oom_badness() was fixed, but oom_kill_task() still ignores the task without ->mm - oom_forkbomb_penalty() should use find_lock_task_mm() too, and it also needs other changes to actually find the first first-descendant children This will be addressed later. [kosaki.motohiro@jp.fujitsu.com: use in badness(), __oom_kill_task()] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:45 +07:00
return t;
oom: introduce find_lock_task_mm() to fix !mm false positives Almost all ->mm == NULL checks in oom_kill.c are wrong. The current code assumes that the task without ->mm has already released its memory and ignores the process. However this is not necessarily true when this process is multithreaded, other live sub-threads can use this ->mm. - Remove the "if (!p->mm)" check in select_bad_process(), it is just wrong. - Add the new helper, find_lock_task_mm(), which finds the live thread which uses the memory and takes task_lock() to pin ->mm - change oom_badness() to use this helper instead of just checking ->mm != NULL. - As David pointed out, select_bad_process() must never choose the task without ->mm, but no matter what oom_badness() returns the task can be chosen if nothing else has been found yet. Change oom_badness() to return int, change it to return -1 if find_lock_task_mm() fails, and change select_bad_process() to check points >= 0. Note! This patch is not enough, we need more changes. - oom_badness() was fixed, but oom_kill_task() still ignores the task without ->mm - oom_forkbomb_penalty() should use find_lock_task_mm() too, and it also needs other changes to actually find the first first-descendant children This will be addressed later. [kosaki.motohiro@jp.fujitsu.com: use in badness(), __oom_kill_task()] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:45 +07:00
}
/*
* order == -1 means the oom kill is required by sysrq, otherwise only
* for display purposes.
*/
static inline bool is_sysrq_oom(struct oom_control *oc)
{
return oc->order == -1;
}
static inline bool is_memcg_oom(struct oom_control *oc)
{
return oc->memcg != NULL;
}
/* return true if the task is not adequate as candidate victim task. */
static bool oom_unkillable_task(struct task_struct *p,
struct mem_cgroup *memcg, const nodemask_t *nodemask)
{
if (is_global_init(p))
return true;
if (p->flags & PF_KTHREAD)
return true;
/* When mem_cgroup_out_of_memory() and p is not member of the group */
if (memcg && !task_in_mem_cgroup(p, memcg))
return true;
/* p may not have freeable memory in nodemask */
if (!has_intersects_mems_allowed(p, nodemask))
return true;
return false;
}
/**
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
* oom_badness - heuristic function to determine which candidate task to kill
* @p: task struct of which task we should calculate
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
* @totalpages: total present RAM allowed for page allocation
*
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
* The heuristic for determining which task to kill is made to be as simple and
* predictable as possible. The goal is to return the highest value for the
* task consuming the most memory to avoid subsequent oom failures.
*/
unsigned long oom_badness(struct task_struct *p, struct mem_cgroup *memcg,
const nodemask_t *nodemask, unsigned long totalpages)
{
long points;
long adj;
oom: move oom_adj value from task_struct to signal_struct Currently, OOM logic callflow is here. __out_of_memory() select_bad_process() for each task badness() calculate badness of one task oom_kill_process() search child oom_kill_task() kill target task and mm shared tasks with it example, process-A have two thread, thread-A and thread-B and it have very fat memory and each thread have following oom_adj and oom_score. thread-A: oom_adj = OOM_DISABLE, oom_score = 0 thread-B: oom_adj = 0, oom_score = very-high Then, select_bad_process() select thread-B, but oom_kill_task() refuse kill the task because thread-A have OOM_DISABLE. Thus __out_of_memory() call select_bad_process() again. but select_bad_process() select the same task. It mean kernel fall in livelock. The fact is, select_bad_process() must select killable task. otherwise OOM logic go into livelock. And root cause is, oom_adj shouldn't be per-thread value. it should be per-process value because OOM-killer kill a process, not thread. Thus This patch moves oomkilladj (now more appropriately named oom_adj) from struct task_struct to struct signal_struct. it naturally prevent select_bad_process() choose wrong task. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:03:13 +07:00
if (oom_unkillable_task(p, memcg, nodemask))
return 0;
oom: introduce find_lock_task_mm() to fix !mm false positives Almost all ->mm == NULL checks in oom_kill.c are wrong. The current code assumes that the task without ->mm has already released its memory and ignores the process. However this is not necessarily true when this process is multithreaded, other live sub-threads can use this ->mm. - Remove the "if (!p->mm)" check in select_bad_process(), it is just wrong. - Add the new helper, find_lock_task_mm(), which finds the live thread which uses the memory and takes task_lock() to pin ->mm - change oom_badness() to use this helper instead of just checking ->mm != NULL. - As David pointed out, select_bad_process() must never choose the task without ->mm, but no matter what oom_badness() returns the task can be chosen if nothing else has been found yet. Change oom_badness() to return int, change it to return -1 if find_lock_task_mm() fails, and change select_bad_process() to check points >= 0. Note! This patch is not enough, we need more changes. - oom_badness() was fixed, but oom_kill_task() still ignores the task without ->mm - oom_forkbomb_penalty() should use find_lock_task_mm() too, and it also needs other changes to actually find the first first-descendant children This will be addressed later. [kosaki.motohiro@jp.fujitsu.com: use in badness(), __oom_kill_task()] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:45 +07:00
p = find_lock_task_mm(p);
if (!p)
return 0;
/*
* Do not even consider tasks which are explicitly marked oom
* unkillable or have been already oom reaped or the are in
* the middle of vfork
*/
adj = (long)p->signal->oom_score_adj;
if (adj == OOM_SCORE_ADJ_MIN ||
test_bit(MMF_OOM_SKIP, &p->mm->flags) ||
in_vfork(p)) {
task_unlock(p);
return 0;
}
/*
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
* The baseline for the badness score is the proportion of RAM that each
* task's rss, pagetable and swap space use.
*/
mm: account pmd page tables to the process Dave noticed that unprivileged process can allocate significant amount of memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and memory cgroup. The trick is to allocate a lot of PMD page tables. Linux kernel doesn't account PMD tables to the process, only PTE. The use-cases below use few tricks to allocate a lot of PMD page tables while keeping VmRSS and VmPTE low. oom_score for the process will be 0. #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/prctl.h> #define PUD_SIZE (1UL << 30) #define PMD_SIZE (1UL << 21) #define NR_PUD 130000 int main(void) { char *addr = NULL; unsigned long i; prctl(PR_SET_THP_DISABLE); for (i = 0; i < NR_PUD ; i++) { addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); if (addr == MAP_FAILED) { perror("mmap"); break; } *addr = 'x'; munmap(addr, PMD_SIZE); mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0); if (addr == MAP_FAILED) perror("re-mmap"), exit(1); } printf("PID %d consumed %lu KiB in PMD page tables\n", getpid(), i * 4096 >> 10); return pause(); } The patch addresses the issue by account PMD tables to the process the same way we account PTE. The main place where PMD tables is accounted is __pmd_alloc() and free_pmd_range(). But there're few corner cases: - HugeTLB can share PMD page tables. The patch handles by accounting the table to all processes who share it. - x86 PAE pre-allocates few PMD tables on fork. - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity check on exit(2). Accounting only happens on configuration where PMD page table's level is present (PMD is not folded). As with nr_ptes we use per-mm counter. The counter value is used to calculate baseline for badness score by oom-killer. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: David Rientjes <rientjes@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:50 +07:00
points = get_mm_rss(p->mm) + get_mm_counter(p->mm, MM_SWAPENTS) +
atomic_long_read(&p->mm->nr_ptes) + mm_nr_pmds(p->mm);
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
task_unlock(p);
/*
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
* Root processes get 3% bonus, just like the __vm_enough_memory()
* implementation used by LSMs.
*/
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
if (has_capability_noaudit(p, CAP_SYS_ADMIN))
mm, oom: base root bonus on current usage A 3% of system memory bonus is sometimes too excessive in comparison to other processes. With commit a63d83f427fb ("oom: badness heuristic rewrite"), the OOM killer tries to avoid killing privileged tasks by subtracting 3% of overall memory (system or cgroup) from their per-task consumption. But as a result, all root tasks that consume less than 3% of overall memory are considered equal, and so it only takes 33+ privileged tasks pushing the system out of memory for the OOM killer to do something stupid and kill dhclient or other root-owned processes. For example, on a 32G machine it can't tell the difference between the 1M agetty and the 10G fork bomb member. The changelog describes this 3% boost as the equivalent to the global overcommit limit being 3% higher for privileged tasks, but this is not the same as discounting 3% of overall memory from _every privileged task individually_ during OOM selection. Replace the 3% of system memory bonus with a 3% of current memory usage bonus. By giving root tasks a bonus that is proportional to their actual size, they remain comparable even when relatively small. In the example above, the OOM killer will discount the 1M agetty's 256 badness points down to 179, and the 10G fork bomb's 262144 points down to 183500 points and make the right choice, instead of discounting both to 0 and killing agetty because it's first in the task list. Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-31 06:46:11 +07:00
points -= (points * 3) / 100;
/* Normalize to oom_score_adj units */
adj *= totalpages / 1000;
points += adj;
/*
* Never return 0 for an eligible task regardless of the root bonus and
* oom_score_adj (oom_score_adj can't be OOM_SCORE_ADJ_MIN here).
*/
return points > 0 ? points : 1;
}
enum oom_constraint {
CONSTRAINT_NONE,
CONSTRAINT_CPUSET,
CONSTRAINT_MEMORY_POLICY,
CONSTRAINT_MEMCG,
};
/*
* Determine the type of allocation constraint.
*/
static enum oom_constraint constrained_alloc(struct oom_control *oc)
{
struct zone *zone;
mm: have zonelist contains structs with both a zone pointer and zone_idx Filtering zonelists requires very frequent use of zone_idx(). This is costly as it involves a lookup of another structure and a substraction operation. As the zone_idx is often required, it should be quickly accessible. The node idx could also be stored here if it was found that accessing zone->node is significant which may be the case on workloads where nodemasks are heavily used. This patch introduces a struct zoneref to store a zone pointer and a zone index. The zonelist then consists of an array of these struct zonerefs which are looked up as necessary. Helpers are given for accessing the zone index as well as the node index. [kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers] [hugh@veritas.com: mm-have-zonelist: fix memcg ooms] [hugh@veritas.com: just return do_try_to_free_pages] [hugh@veritas.com: do_try_to_free_pages gfp_mask redundant] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:12:17 +07:00
struct zoneref *z;
enum zone_type high_zoneidx = gfp_zone(oc->gfp_mask);
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
bool cpuset_limited = false;
int nid;
if (is_memcg_oom(oc)) {
oc->totalpages = mem_cgroup_get_limit(oc->memcg) ?: 1;
return CONSTRAINT_MEMCG;
}
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
/* Default to all available memory */
oc->totalpages = totalram_pages + total_swap_pages;
if (!IS_ENABLED(CONFIG_NUMA))
return CONSTRAINT_NONE;
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
if (!oc->zonelist)
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
return CONSTRAINT_NONE;
/*
* Reach here only when __GFP_NOFAIL is used. So, we should avoid
* to kill current.We have to random task kill in this case.
* Hopefully, CONSTRAINT_THISNODE...but no way to handle it, now.
*/
if (oc->gfp_mask & __GFP_THISNODE)
return CONSTRAINT_NONE;
/*
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
* This is not a __GFP_THISNODE allocation, so a truncated nodemask in
* the page allocator means a mempolicy is in effect. Cpuset policy
* is enforced in get_page_from_freelist().
*/
if (oc->nodemask &&
!nodes_subset(node_states[N_MEMORY], *oc->nodemask)) {
oc->totalpages = total_swap_pages;
for_each_node_mask(nid, *oc->nodemask)
oc->totalpages += node_spanned_pages(nid);
return CONSTRAINT_MEMORY_POLICY;
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
}
/* Check this allocation failure is caused by cpuset's wall function */
for_each_zone_zonelist_nodemask(zone, z, oc->zonelist,
high_zoneidx, oc->nodemask)
if (!cpuset_zone_allowed(zone, oc->gfp_mask))
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
cpuset_limited = true;
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
if (cpuset_limited) {
oc->totalpages = total_swap_pages;
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
for_each_node_mask(nid, cpuset_current_mems_allowed)
oc->totalpages += node_spanned_pages(nid);
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
return CONSTRAINT_CPUSET;
}
return CONSTRAINT_NONE;
}
static int oom_evaluate_task(struct task_struct *task, void *arg)
{
struct oom_control *oc = arg;
unsigned long points;
if (oom_unkillable_task(task, NULL, oc->nodemask))
goto next;
/*
* This task already has access to memory reserves and is being killed.
* Don't allow any other task to have access to the reserves unless
* the task has MMF_OOM_SKIP because chances that it would release
* any memory is quite low.
*/
if (!is_sysrq_oom(oc) && tsk_is_oom_victim(task)) {
if (test_bit(MMF_OOM_SKIP, &task->signal->oom_mm->flags))
goto next;
goto abort;
}
mm, oom: fix race when specifying a thread as the oom origin test_set_oom_score_adj() and compare_swap_oom_score_adj() are used to specify that current should be killed first if an oom condition occurs in between the two calls. The usage is short oom_score_adj = test_set_oom_score_adj(OOM_SCORE_ADJ_MAX); ... compare_swap_oom_score_adj(OOM_SCORE_ADJ_MAX, oom_score_adj); to store the thread's oom_score_adj, temporarily change it to the maximum score possible, and then restore the old value if it is still the same. This happens to still be racy, however, if the user writes OOM_SCORE_ADJ_MAX to /proc/pid/oom_score_adj in between the two calls. The compare_swap_oom_score_adj() will then incorrectly reset the old value prior to the write of OOM_SCORE_ADJ_MAX. To fix this, introduce a new oom_flags_t member in struct signal_struct that will be used for per-thread oom killer flags. KSM and swapoff can now use a bit in this member to specify that threads should be killed first in oom conditions without playing around with oom_score_adj. This also allows the correct oom_score_adj to always be shown when reading /proc/pid/oom_score. Signed-off-by: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:56 +07:00
/*
* If task is allocating a lot of memory and has been marked to be
* killed first if it triggers an oom, then select it.
*/
if (oom_task_origin(task)) {
points = ULONG_MAX;
goto select;
}
mm, oom: fix race when specifying a thread as the oom origin test_set_oom_score_adj() and compare_swap_oom_score_adj() are used to specify that current should be killed first if an oom condition occurs in between the two calls. The usage is short oom_score_adj = test_set_oom_score_adj(OOM_SCORE_ADJ_MAX); ... compare_swap_oom_score_adj(OOM_SCORE_ADJ_MAX, oom_score_adj); to store the thread's oom_score_adj, temporarily change it to the maximum score possible, and then restore the old value if it is still the same. This happens to still be racy, however, if the user writes OOM_SCORE_ADJ_MAX to /proc/pid/oom_score_adj in between the two calls. The compare_swap_oom_score_adj() will then incorrectly reset the old value prior to the write of OOM_SCORE_ADJ_MAX. To fix this, introduce a new oom_flags_t member in struct signal_struct that will be used for per-thread oom killer flags. KSM and swapoff can now use a bit in this member to specify that threads should be killed first in oom conditions without playing around with oom_score_adj. This also allows the correct oom_score_adj to always be shown when reading /proc/pid/oom_score. Signed-off-by: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:56 +07:00
points = oom_badness(task, NULL, oc->nodemask, oc->totalpages);
if (!points || points < oc->chosen_points)
goto next;
/* Prefer thread group leaders for display purposes */
if (points == oc->chosen_points && thread_group_leader(oc->chosen))
goto next;
select:
if (oc->chosen)
put_task_struct(oc->chosen);
get_task_struct(task);
oc->chosen = task;
oc->chosen_points = points;
next:
return 0;
abort:
if (oc->chosen)
put_task_struct(oc->chosen);
oc->chosen = (void *)-1UL;
return 1;
}
/*
* Simple selection loop. We choose the process with the highest number of
* 'points'. In case scan was aborted, oc->chosen is set to -1.
*/
static void select_bad_process(struct oom_control *oc)
{
if (is_memcg_oom(oc))
mem_cgroup_scan_tasks(oc->memcg, oom_evaluate_task, oc);
else {
struct task_struct *p;
rcu_read_lock();
for_each_process(p)
if (oom_evaluate_task(p, oc))
break;
rcu_read_unlock();
}
oc->chosen_points = oc->chosen_points * 1000 / oc->totalpages;
}
/**
* dump_tasks - dump current memory state of all system tasks
* @memcg: current's memory controller, if constrained
* @nodemask: nodemask passed to page allocator for mempolicy ooms
*
* Dumps the current memory state of all eligible tasks. Tasks not in the same
* memcg, not in the same cpuset, or bound to a disjoint set of mempolicy nodes
* are not shown.
* State information includes task's pid, uid, tgid, vm size, rss, nr_ptes,
* swapents, oom_score_adj value, and name.
*/
static void dump_tasks(struct mem_cgroup *memcg, const nodemask_t *nodemask)
{
struct task_struct *p;
struct task_struct *task;
mm: account pmd page tables to the process Dave noticed that unprivileged process can allocate significant amount of memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and memory cgroup. The trick is to allocate a lot of PMD page tables. Linux kernel doesn't account PMD tables to the process, only PTE. The use-cases below use few tricks to allocate a lot of PMD page tables while keeping VmRSS and VmPTE low. oom_score for the process will be 0. #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/prctl.h> #define PUD_SIZE (1UL << 30) #define PMD_SIZE (1UL << 21) #define NR_PUD 130000 int main(void) { char *addr = NULL; unsigned long i; prctl(PR_SET_THP_DISABLE); for (i = 0; i < NR_PUD ; i++) { addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); if (addr == MAP_FAILED) { perror("mmap"); break; } *addr = 'x'; munmap(addr, PMD_SIZE); mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0); if (addr == MAP_FAILED) perror("re-mmap"), exit(1); } printf("PID %d consumed %lu KiB in PMD page tables\n", getpid(), i * 4096 >> 10); return pause(); } The patch addresses the issue by account PMD tables to the process the same way we account PTE. The main place where PMD tables is accounted is __pmd_alloc() and free_pmd_range(). But there're few corner cases: - HugeTLB can share PMD page tables. The patch handles by accounting the table to all processes who share it. - x86 PAE pre-allocates few PMD tables on fork. - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity check on exit(2). Accounting only happens on configuration where PMD page table's level is present (PMD is not folded). As with nr_ptes we use per-mm counter. The counter value is used to calculate baseline for badness score by oom-killer. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: David Rientjes <rientjes@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:50 +07:00
pr_info("[ pid ] uid tgid total_vm rss nr_ptes nr_pmds swapents oom_score_adj name\n");
rcu_read_lock();
for_each_process(p) {
if (oom_unkillable_task(p, memcg, nodemask))
continue;
task = find_lock_task_mm(p);
if (!task) {
/*
* This is a kthread or all of p's threads have already
* detached their mm's. There's no need to report
* them; they can't be oom killed anyway.
*/
continue;
}
mm: account pmd page tables to the process Dave noticed that unprivileged process can allocate significant amount of memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and memory cgroup. The trick is to allocate a lot of PMD page tables. Linux kernel doesn't account PMD tables to the process, only PTE. The use-cases below use few tricks to allocate a lot of PMD page tables while keeping VmRSS and VmPTE low. oom_score for the process will be 0. #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/prctl.h> #define PUD_SIZE (1UL << 30) #define PMD_SIZE (1UL << 21) #define NR_PUD 130000 int main(void) { char *addr = NULL; unsigned long i; prctl(PR_SET_THP_DISABLE); for (i = 0; i < NR_PUD ; i++) { addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); if (addr == MAP_FAILED) { perror("mmap"); break; } *addr = 'x'; munmap(addr, PMD_SIZE); mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0); if (addr == MAP_FAILED) perror("re-mmap"), exit(1); } printf("PID %d consumed %lu KiB in PMD page tables\n", getpid(), i * 4096 >> 10); return pause(); } The patch addresses the issue by account PMD tables to the process the same way we account PTE. The main place where PMD tables is accounted is __pmd_alloc() and free_pmd_range(). But there're few corner cases: - HugeTLB can share PMD page tables. The patch handles by accounting the table to all processes who share it. - x86 PAE pre-allocates few PMD tables on fork. - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity check on exit(2). Accounting only happens on configuration where PMD page table's level is present (PMD is not folded). As with nr_ptes we use per-mm counter. The counter value is used to calculate baseline for badness score by oom-killer. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: David Rientjes <rientjes@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:50 +07:00
pr_info("[%5d] %5d %5d %8lu %8lu %7ld %7ld %8lu %5hd %s\n",
task->pid, from_kuid(&init_user_ns, task_uid(task)),
task->tgid, task->mm->total_vm, get_mm_rss(task->mm),
atomic_long_read(&task->mm->nr_ptes),
mm: account pmd page tables to the process Dave noticed that unprivileged process can allocate significant amount of memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and memory cgroup. The trick is to allocate a lot of PMD page tables. Linux kernel doesn't account PMD tables to the process, only PTE. The use-cases below use few tricks to allocate a lot of PMD page tables while keeping VmRSS and VmPTE low. oom_score for the process will be 0. #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/prctl.h> #define PUD_SIZE (1UL << 30) #define PMD_SIZE (1UL << 21) #define NR_PUD 130000 int main(void) { char *addr = NULL; unsigned long i; prctl(PR_SET_THP_DISABLE); for (i = 0; i < NR_PUD ; i++) { addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); if (addr == MAP_FAILED) { perror("mmap"); break; } *addr = 'x'; munmap(addr, PMD_SIZE); mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0); if (addr == MAP_FAILED) perror("re-mmap"), exit(1); } printf("PID %d consumed %lu KiB in PMD page tables\n", getpid(), i * 4096 >> 10); return pause(); } The patch addresses the issue by account PMD tables to the process the same way we account PTE. The main place where PMD tables is accounted is __pmd_alloc() and free_pmd_range(). But there're few corner cases: - HugeTLB can share PMD page tables. The patch handles by accounting the table to all processes who share it. - x86 PAE pre-allocates few PMD tables on fork. - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity check on exit(2). Accounting only happens on configuration where PMD page table's level is present (PMD is not folded). As with nr_ptes we use per-mm counter. The counter value is used to calculate baseline for badness score by oom-killer. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: David Rientjes <rientjes@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:50 +07:00
mm_nr_pmds(task->mm),
get_mm_counter(task->mm, MM_SWAPENTS),
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
task->signal->oom_score_adj, task->comm);
task_unlock(task);
}
rcu_read_unlock();
}
static void dump_header(struct oom_control *oc, struct task_struct *p)
{
pr_warn("%s invoked oom-killer: gfp_mask=%#x(%pGg), nodemask=",
current->comm, oc->gfp_mask, &oc->gfp_mask);
if (oc->nodemask)
pr_cont("%*pbl", nodemask_pr_args(oc->nodemask));
else
pr_cont("(null)");
pr_cont(", order=%d, oom_score_adj=%hd\n",
oc->order, current->signal->oom_score_adj);
if (!IS_ENABLED(CONFIG_COMPACTION) && oc->order)
pr_warn("COMPACTION is disabled!!!\n");
cpuset_print_current_mems_allowed();
dump_stack();
if (oc->memcg)
mem_cgroup_print_oom_info(oc->memcg, p);
memcg, oom: provide more precise dump info while memcg oom happening Currently when a memcg oom is happening the oom dump messages is still global state and provides few useful info for users. This patch prints more pointed memcg page statistics for memcg-oom and take hierarchy into consideration: Based on Michal's advice, we take hierarchy into consideration: supppose we trigger an OOM on A's limit root_memcg | A (use_hierachy=1) / \ B C | D then the printed info will be: Memory cgroup stats for /A:... Memory cgroup stats for /A/B:... Memory cgroup stats for /A/C:... Memory cgroup stats for /A/B/D:... Following are samples of oom output: (1) Before change: mal-80 invoked oom-killer:gfp_mask=0xd0, order=0, oom_score_adj=0 mal-80 cpuset=/ mems_allowed=0 Pid: 2976, comm: mal-80 Not tainted 3.7.0+ #10 Call Trace: [<ffffffff8167fbfb>] dump_header+0x83/0x1ca ..... (call trace) [<ffffffff8168a818>] page_fault+0x28/0x30 <<<<<<<<<<<<<<<<<<<<< memcg specific information Task in /A/B/D killed as a result of limit of /A memory: usage 101376kB, limit 101376kB, failcnt 57 memory+swap: usage 101376kB, limit 101376kB, failcnt 0 kmem: usage 0kB, limit 9007199254740991kB, failcnt 0 <<<<<<<<<<<<<<<<<<<<< print per cpu pageset stat Mem-Info: Node 0 DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 ...... CPU 3: hi: 0, btch: 1 usd: 0 Node 0 DMA32 per-cpu: CPU 0: hi: 186, btch: 31 usd: 173 ...... CPU 3: hi: 186, btch: 31 usd: 130 <<<<<<<<<<<<<<<<<<<<< print global page state active_anon:92963 inactive_anon:40777 isolated_anon:0 active_file:33027 inactive_file:51718 isolated_file:0 unevictable:0 dirty:3 writeback:0 unstable:0 free:729995 slab_reclaimable:6897 slab_unreclaimable:6263 mapped:20278 shmem:35971 pagetables:5885 bounce:0 free_cma:0 <<<<<<<<<<<<<<<<<<<<< print per zone page state Node 0 DMA free:15836kB ... all_unreclaimable? no lowmem_reserve[]: 0 3175 3899 3899 Node 0 DMA32 free:2888564kB ... all_unrelaimable? no lowmem_reserve[]: 0 0 724 724 lowmem_reserve[]: 0 0 0 0 Node 0 DMA: 1*4kB (U) ... 3*4096kB (M) = 15836kB Node 0 DMA32: 41*4kB (UM) ... 702*4096kB (MR) = 2888316kB 120710 total pagecache pages 0 pages in swap cache <<<<<<<<<<<<<<<<<<<<< print global swap cache stat Swap cache stats: add 0, delete 0, find 0/0 Free swap = 499708kB Total swap = 499708kB 1040368 pages RAM 58678 pages reserved 169065 pages shared 173632 pages non-shared [ pid ] uid tgid total_vm rss nr_ptes swapents oom_score_adj name [ 2693] 0 2693 6005 1324 17 0 0 god [ 2754] 0 2754 6003 1320 16 0 0 god [ 2811] 0 2811 5992 1304 18 0 0 god [ 2874] 0 2874 6005 1323 18 0 0 god [ 2935] 0 2935 8720 7742 21 0 0 mal-30 [ 2976] 0 2976 21520 17577 42 0 0 mal-80 Memory cgroup out of memory: Kill process 2976 (mal-80) score 665 or sacrifice child Killed process 2976 (mal-80) total-vm:86080kB, anon-rss:69964kB, file-rss:344kB We can see that messages dumped by show_free_areas() are longsome and can provide so limited info for memcg that just happen oom. (2) After change mal-80 invoked oom-killer: gfp_mask=0xd0, order=0, oom_score_adj=0 mal-80 cpuset=/ mems_allowed=0 Pid: 2704, comm: mal-80 Not tainted 3.7.0+ #10 Call Trace: [<ffffffff8167fd0b>] dump_header+0x83/0x1d1 .......(call trace) [<ffffffff8168a918>] page_fault+0x28/0x30 Task in /A/B/D killed as a result of limit of /A <<<<<<<<<<<<<<<<<<<<< memcg specific information memory: usage 102400kB, limit 102400kB, failcnt 140 memory+swap: usage 102400kB, limit 102400kB, failcnt 0 kmem: usage 0kB, limit 9007199254740991kB, failcnt 0 Memory cgroup stats for /A: cache:32KB rss:30984KB mapped_file:0KB swap:0KB inactive_anon:6912KB active_anon:24072KB inactive_file:32KB active_file:0KB unevictable:0KB Memory cgroup stats for /A/B: cache:0KB rss:0KB mapped_file:0KB swap:0KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB Memory cgroup stats for /A/C: cache:0KB rss:0KB mapped_file:0KB swap:0KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB Memory cgroup stats for /A/B/D: cache:32KB rss:71352KB mapped_file:0KB swap:0KB inactive_anon:6656KB active_anon:64696KB inactive_file:16KB active_file:16KB unevictable:0KB [ pid ] uid tgid total_vm rss nr_ptes swapents oom_score_adj name [ 2260] 0 2260 6006 1325 18 0 0 god [ 2383] 0 2383 6003 1319 17 0 0 god [ 2503] 0 2503 6004 1321 18 0 0 god [ 2622] 0 2622 6004 1321 16 0 0 god [ 2695] 0 2695 8720 7741 22 0 0 mal-30 [ 2704] 0 2704 21520 17839 43 0 0 mal-80 Memory cgroup out of memory: Kill process 2704 (mal-80) score 669 or sacrifice child Killed process 2704 (mal-80) total-vm:86080kB, anon-rss:71016kB, file-rss:340kB This version provides more pointed info for memcg in "Memory cgroup stats for XXX" section. Signed-off-by: Sha Zhengju <handai.szj@taobao.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 07:32:05 +07:00
else
show_mem(SHOW_MEM_FILTER_NODES, oc->nodemask);
if (sysctl_oom_dump_tasks)
dump_tasks(oc->memcg, oc->nodemask);
}
OOM, PM: OOM killed task shouldn't escape PM suspend PM freezer relies on having all tasks frozen by the time devices are getting frozen so that no task will touch them while they are getting frozen. But OOM killer is allowed to kill an already frozen task in order to handle OOM situtation. In order to protect from late wake ups OOM killer is disabled after all tasks are frozen. This, however, still keeps a window open when a killed task didn't manage to die by the time freeze_processes finishes. Reduce the race window by checking all tasks after OOM killer has been disabled. This is still not race free completely unfortunately because oom_killer_disable cannot stop an already ongoing OOM killer so a task might still wake up from the fridge and get killed without freeze_processes noticing. Full synchronization of OOM and freezer is, however, too heavy weight for this highly unlikely case. Introduce and check oom_kills counter which gets incremented early when the allocator enters __alloc_pages_may_oom path and only check all the tasks if the counter changes during the freezing attempt. The counter is updated so early to reduce the race window since allocator checked oom_killer_disabled which is set by PM-freezing code. A false positive will push the PM-freezer into a slow path but that is not a big deal. Changes since v1 - push the re-check loop out of freeze_processes into check_frozen_processes and invert the condition to make the code more readable as per Rafael Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring) Cc: 3.2+ <stable@vger.kernel.org> # 3.2+ Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-20 23:12:32 +07:00
/*
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
* Number of OOM victims in flight
OOM, PM: OOM killed task shouldn't escape PM suspend PM freezer relies on having all tasks frozen by the time devices are getting frozen so that no task will touch them while they are getting frozen. But OOM killer is allowed to kill an already frozen task in order to handle OOM situtation. In order to protect from late wake ups OOM killer is disabled after all tasks are frozen. This, however, still keeps a window open when a killed task didn't manage to die by the time freeze_processes finishes. Reduce the race window by checking all tasks after OOM killer has been disabled. This is still not race free completely unfortunately because oom_killer_disable cannot stop an already ongoing OOM killer so a task might still wake up from the fridge and get killed without freeze_processes noticing. Full synchronization of OOM and freezer is, however, too heavy weight for this highly unlikely case. Introduce and check oom_kills counter which gets incremented early when the allocator enters __alloc_pages_may_oom path and only check all the tasks if the counter changes during the freezing attempt. The counter is updated so early to reduce the race window since allocator checked oom_killer_disabled which is set by PM-freezing code. A false positive will push the PM-freezer into a slow path but that is not a big deal. Changes since v1 - push the re-check loop out of freeze_processes into check_frozen_processes and invert the condition to make the code more readable as per Rafael Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring) Cc: 3.2+ <stable@vger.kernel.org> # 3.2+ Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-20 23:12:32 +07:00
*/
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
static atomic_t oom_victims = ATOMIC_INIT(0);
static DECLARE_WAIT_QUEUE_HEAD(oom_victims_wait);
OOM, PM: OOM killed task shouldn't escape PM suspend PM freezer relies on having all tasks frozen by the time devices are getting frozen so that no task will touch them while they are getting frozen. But OOM killer is allowed to kill an already frozen task in order to handle OOM situtation. In order to protect from late wake ups OOM killer is disabled after all tasks are frozen. This, however, still keeps a window open when a killed task didn't manage to die by the time freeze_processes finishes. Reduce the race window by checking all tasks after OOM killer has been disabled. This is still not race free completely unfortunately because oom_killer_disable cannot stop an already ongoing OOM killer so a task might still wake up from the fridge and get killed without freeze_processes noticing. Full synchronization of OOM and freezer is, however, too heavy weight for this highly unlikely case. Introduce and check oom_kills counter which gets incremented early when the allocator enters __alloc_pages_may_oom path and only check all the tasks if the counter changes during the freezing attempt. The counter is updated so early to reduce the race window since allocator checked oom_killer_disabled which is set by PM-freezing code. A false positive will push the PM-freezer into a slow path but that is not a big deal. Changes since v1 - push the re-check loop out of freeze_processes into check_frozen_processes and invert the condition to make the code more readable as per Rafael Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring) Cc: 3.2+ <stable@vger.kernel.org> # 3.2+ Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-20 23:12:32 +07:00
static bool oom_killer_disabled __read_mostly;
OOM, PM: OOM killed task shouldn't escape PM suspend PM freezer relies on having all tasks frozen by the time devices are getting frozen so that no task will touch them while they are getting frozen. But OOM killer is allowed to kill an already frozen task in order to handle OOM situtation. In order to protect from late wake ups OOM killer is disabled after all tasks are frozen. This, however, still keeps a window open when a killed task didn't manage to die by the time freeze_processes finishes. Reduce the race window by checking all tasks after OOM killer has been disabled. This is still not race free completely unfortunately because oom_killer_disable cannot stop an already ongoing OOM killer so a task might still wake up from the fridge and get killed without freeze_processes noticing. Full synchronization of OOM and freezer is, however, too heavy weight for this highly unlikely case. Introduce and check oom_kills counter which gets incremented early when the allocator enters __alloc_pages_may_oom path and only check all the tasks if the counter changes during the freezing attempt. The counter is updated so early to reduce the race window since allocator checked oom_killer_disabled which is set by PM-freezing code. A false positive will push the PM-freezer into a slow path but that is not a big deal. Changes since v1 - push the re-check loop out of freeze_processes into check_frozen_processes and invert the condition to make the code more readable as per Rafael Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring) Cc: 3.2+ <stable@vger.kernel.org> # 3.2+ Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-20 23:12:32 +07:00
#define K(x) ((x) << (PAGE_SHIFT-10))
/*
* task->mm can be NULL if the task is the exited group leader. So to
* determine whether the task is using a particular mm, we examine all the
* task's threads: if one of those is using this mm then this task was also
* using it.
*/
mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj oom_score_adj is shared for the thread groups (via struct signal) but this is not sufficient to cover processes sharing mm (CLONE_VM without CLONE_SIGHAND) and so we can easily end up in a situation when some processes update their oom_score_adj and confuse the oom killer. In the worst case some of those processes might hide from the oom killer altogether via OOM_SCORE_ADJ_MIN while others are eligible. OOM killer would then pick up those eligible but won't be allowed to kill others sharing the same mm so the mm wouldn't release the mm and so the memory. It would be ideal to have the oom_score_adj per mm_struct because that is the natural entity OOM killer considers. But this will not work because some programs are doing vfork() set_oom_adj() exec() We can achieve the same though. oom_score_adj write handler can set the oom_score_adj for all processes sharing the same mm if the task is not in the middle of vfork. As a result all the processes will share the same oom_score_adj. The current implementation is rather pessimistic and checks all the existing processes by default if there is more than 1 holder of the mm but we do not have any reliable way to check for external users yet. Link: http://lkml.kernel.org/r/1466426628-15074-5-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: David Rientjes <rientjes@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:44:43 +07:00
bool process_shares_mm(struct task_struct *p, struct mm_struct *mm)
{
struct task_struct *t;
for_each_thread(p, t) {
struct mm_struct *t_mm = READ_ONCE(t->mm);
if (t_mm)
return t_mm == mm;
}
return false;
}
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
#ifdef CONFIG_MMU
/*
* OOM Reaper kernel thread which tries to reap the memory used by the OOM
* victim (if that is possible) to help the OOM killer to move on.
*/
static struct task_struct *oom_reaper_th;
static DECLARE_WAIT_QUEUE_HEAD(oom_reaper_wait);
static struct task_struct *oom_reaper_list;
mm, oom_reaper: implement OOM victims queuing wake_oom_reaper has allowed only 1 oom victim to be queued. The main reason for that was the simplicity as other solutions would require some way of queuing. The current approach is racy and that was deemed sufficient as the oom_reaper is considered a best effort approach to help with oom handling when the OOM victim cannot terminate in a reasonable time. The race could lead to missing an oom victim which can get stuck out_of_memory wake_oom_reaper cmpxchg // OK oom_reaper oom_reap_task __oom_reap_task oom_victim terminates atomic_inc_not_zero // fail out_of_memory wake_oom_reaper cmpxchg // fails task_to_reap = NULL This race requires 2 OOM invocations in a short time period which is not very likely but certainly not impossible. E.g. the original victim might have not released a lot of memory for some reason. The situation would improve considerably if wake_oom_reaper used a more robust queuing. This is what this patch implements. This means adding oom_reaper_list list_head into task_struct (eat a hole before embeded thread_struct for that purpose) and a oom_reaper_lock spinlock for queuing synchronization. wake_oom_reaper will then add the task on the queue and oom_reaper will dequeue it. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:33 +07:00
static DEFINE_SPINLOCK(oom_reaper_lock);
static bool __oom_reap_task_mm(struct task_struct *tsk, struct mm_struct *mm)
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
{
struct mmu_gather tlb;
struct vm_area_struct *vma;
bool ret = true;
oom_reaper: close race with exiting task Tetsuo has reported: Out of memory: Kill process 443 (oleg's-test) score 855 or sacrifice child Killed process 443 (oleg's-test) total-vm:493248kB, anon-rss:423880kB, file-rss:4kB, shmem-rss:0kB sh invoked oom-killer: gfp_mask=0x24201ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD), order=0, oom_score_adj=0 sh cpuset=/ mems_allowed=0 CPU: 2 PID: 1 Comm: sh Not tainted 4.6.0-rc7+ #51 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 Call Trace: dump_stack+0x85/0xc8 dump_header+0x5b/0x394 oom_reaper: reaped process 443 (oleg's-test), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB In other words: __oom_reap_task exit_mm atomic_inc_not_zero tsk->mm = NULL mmput atomic_dec_and_test # > 0 exit_oom_victim # New victim will be # selected <OOM killer invoked> # no TIF_MEMDIE task so we can select a new one unmap_page_range # to release the memory The race exists even without the oom_reaper because anybody who pins the address space and gets preempted might race with exit_mm but oom_reaper made this race more probable. We can address the oom_reaper part by using oom_lock for __oom_reap_task because this would guarantee that a new oom victim will not be selected if the oom reaper might race with the exit path. This doesn't solve the original issue, though, because somebody else still might be pinning mm_users and so __mmput won't be called to release the memory but that is not really realiably solvable because the task will get away from the oom sight as soon as it is unhashed from the task_list and so we cannot guarantee a new victim won't be selected. [akpm@linux-foundation.org: fix use of unused `mm', Per Stephen] [akpm@linux-foundation.org: coding-style fixes] Fixes: aac453635549 ("mm, oom: introduce oom reaper") Link: http://lkml.kernel.org/r/1464271493-20008-1-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28 04:27:35 +07:00
/*
* We have to make sure to not race with the victim exit path
* and cause premature new oom victim selection:
* __oom_reap_task_mm exit_mm
mm, oom_reaper: make sure that mmput_async is called only when memory was reaped Tetsuo is worried that mmput_async might still lead to a premature new oom victim selection due to the following race: __oom_reap_task exit_mm find_lock_task_mm atomic_inc(mm->mm_users) # = 2 task_unlock task_lock task->mm = NULL up_read(&mm->mmap_sem) < somebody write locks mmap_sem > task_unlock mmput atomic_dec_and_test # = 1 exit_oom_victim down_read_trylock # failed - no reclaim mmput_async # Takes unpredictable amount of time < new OOM situation > the final __mmput will be executed in the delayed context which might happen far in the future. Such a race is highly unlikely because the write holder of mmap_sem would have to be an external task (all direct holders are already killed or exiting) and it usually have to pin mm_users in order to do anything reasonable. We can, however, make sure that the mmput_async is only called when we do not back off and reap some memory. That would reduce the impact of the delayed __mmput because the real content would be already freed. Pin mm_count to keep it alive after we drop task_lock and before we try to get mmap_sem. If the mmap_sem succeeds we can try to grab mm_users reference and then go on with unmapping the address space. It is not clear whether this race is possible at all but it is better to be more robust and do not pin mm_users unless we are sure we are actually doing some real work during __oom_reap_task. Link: http://lkml.kernel.org/r/1465306987-30297-1-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:24:50 +07:00
* mmget_not_zero
oom_reaper: close race with exiting task Tetsuo has reported: Out of memory: Kill process 443 (oleg's-test) score 855 or sacrifice child Killed process 443 (oleg's-test) total-vm:493248kB, anon-rss:423880kB, file-rss:4kB, shmem-rss:0kB sh invoked oom-killer: gfp_mask=0x24201ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD), order=0, oom_score_adj=0 sh cpuset=/ mems_allowed=0 CPU: 2 PID: 1 Comm: sh Not tainted 4.6.0-rc7+ #51 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 Call Trace: dump_stack+0x85/0xc8 dump_header+0x5b/0x394 oom_reaper: reaped process 443 (oleg's-test), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB In other words: __oom_reap_task exit_mm atomic_inc_not_zero tsk->mm = NULL mmput atomic_dec_and_test # > 0 exit_oom_victim # New victim will be # selected <OOM killer invoked> # no TIF_MEMDIE task so we can select a new one unmap_page_range # to release the memory The race exists even without the oom_reaper because anybody who pins the address space and gets preempted might race with exit_mm but oom_reaper made this race more probable. We can address the oom_reaper part by using oom_lock for __oom_reap_task because this would guarantee that a new oom victim will not be selected if the oom reaper might race with the exit path. This doesn't solve the original issue, though, because somebody else still might be pinning mm_users and so __mmput won't be called to release the memory but that is not really realiably solvable because the task will get away from the oom sight as soon as it is unhashed from the task_list and so we cannot guarantee a new victim won't be selected. [akpm@linux-foundation.org: fix use of unused `mm', Per Stephen] [akpm@linux-foundation.org: coding-style fixes] Fixes: aac453635549 ("mm, oom: introduce oom reaper") Link: http://lkml.kernel.org/r/1464271493-20008-1-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28 04:27:35 +07:00
* mmput
* atomic_dec_and_test
* exit_oom_victim
* [...]
* out_of_memory
* select_bad_process
* # no TIF_MEMDIE task selects new victim
* unmap_page_range # frees some memory
*/
mutex_lock(&oom_lock);
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
if (!down_read_trylock(&mm->mmap_sem)) {
ret = false;
goto unlock_oom;
mm, oom_reaper: make sure that mmput_async is called only when memory was reaped Tetsuo is worried that mmput_async might still lead to a premature new oom victim selection due to the following race: __oom_reap_task exit_mm find_lock_task_mm atomic_inc(mm->mm_users) # = 2 task_unlock task_lock task->mm = NULL up_read(&mm->mmap_sem) < somebody write locks mmap_sem > task_unlock mmput atomic_dec_and_test # = 1 exit_oom_victim down_read_trylock # failed - no reclaim mmput_async # Takes unpredictable amount of time < new OOM situation > the final __mmput will be executed in the delayed context which might happen far in the future. Such a race is highly unlikely because the write holder of mmap_sem would have to be an external task (all direct holders are already killed or exiting) and it usually have to pin mm_users in order to do anything reasonable. We can, however, make sure that the mmput_async is only called when we do not back off and reap some memory. That would reduce the impact of the delayed __mmput because the real content would be already freed. Pin mm_count to keep it alive after we drop task_lock and before we try to get mmap_sem. If the mmap_sem succeeds we can try to grab mm_users reference and then go on with unmapping the address space. It is not clear whether this race is possible at all but it is better to be more robust and do not pin mm_users unless we are sure we are actually doing some real work during __oom_reap_task. Link: http://lkml.kernel.org/r/1465306987-30297-1-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:24:50 +07:00
}
/*
* increase mm_users only after we know we will reap something so
* that the mmput_async is called only when we have reaped something
* and delayed __mmput doesn't matter that much
*/
if (!mmget_not_zero(mm)) {
up_read(&mm->mmap_sem);
goto unlock_oom;
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
}
mm: make sure that kthreads will not refault oom reaped memory There are only few use_mm() users in the kernel right now. Most of them write to the target memory but vhost driver relies on copy_from_user/get_user from a kernel thread context. This makes it impossible to reap the memory of an oom victim which shares the mm with the vhost kernel thread because it could see a zero page unexpectedly and theoretically make an incorrect decision visible outside of the killed task context. To quote Michael S. Tsirkin: : Getting an error from __get_user and friends is handled gracefully. : Getting zero instead of a real value will cause userspace : memory corruption. The vhost kernel thread is bound to an open fd of the vhost device which is not tight to the mm owner life cycle in general. The device fd can be inherited or passed over to another process which means that we really have to be careful about unexpected memory corruption because unlike for normal oom victims the result will be visible outside of the oom victim context. Make sure that no kthread context (users of use_mm) can ever see corrupted data because of the oom reaper and hook into the page fault path by checking MMF_UNSTABLE mm flag. __oom_reap_task_mm will set the flag before it starts unmapping the address space while the flag is checked after the page fault has been handled. If the flag is set then SIGBUS is triggered so any g-u-p user will get a error code. Regular tasks do not need this protection because all which share the mm are killed when the mm is reaped and so the corruption will not outlive them. This patch shouldn't have any visible effect at this moment because the OOM killer doesn't invoke oom reaper for tasks with mm shared with kthreads yet. Link: http://lkml.kernel.org/r/1472119394-11342-9-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: "Michael S. Tsirkin" <mst@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:59:06 +07:00
/*
* Tell all users of get_user/copy_from_user etc... that the content
* is no longer stable. No barriers really needed because unmapping
* should imply barriers already and the reader would hit a page fault
* if it stumbled over a reaped memory.
*/
set_bit(MMF_UNSTABLE, &mm->flags);
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
tlb_gather_mmu(&tlb, mm, 0, -1);
for (vma = mm->mmap ; vma; vma = vma->vm_next) {
if (!can_madv_dontneed_vma(vma))
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
continue;
/*
* Only anonymous pages have a good chance to be dropped
* without additional steps which we cannot afford as we
* are OOM already.
*
* We do not even care about fs backed pages because all
* which are reclaimable have already been reclaimed and
* we do not want to block exit_mmap by keeping mm ref
* count elevated without a good reason.
*/
if (vma_is_anonymous(vma) || !(vma->vm_flags & VM_SHARED))
unmap_page_range(&tlb, vma, vma->vm_start, vma->vm_end,
NULL);
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
}
tlb_finish_mmu(&tlb, 0, -1);
pr_info("oom_reaper: reaped process %d (%s), now anon-rss:%lukB, file-rss:%lukB, shmem-rss:%lukB\n",
task_pid_nr(tsk), tsk->comm,
K(get_mm_counter(mm, MM_ANONPAGES)),
K(get_mm_counter(mm, MM_FILEPAGES)),
K(get_mm_counter(mm, MM_SHMEMPAGES)));
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
up_read(&mm->mmap_sem);
oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space When oom_reaper manages to unmap all the eligible vmas there shouldn't be much of the freable memory held by the oom victim left anymore so it makes sense to clear the TIF_MEMDIE flag for the victim and allow the OOM killer to select another task. The lack of TIF_MEMDIE also means that the victim cannot access memory reserves anymore but that shouldn't be a problem because it would get the access again if it needs to allocate and hits the OOM killer again due to the fatal_signal_pending resp. PF_EXITING check. We can safely hide the task from the OOM killer because it is clearly not a good candidate anymore as everyhing reclaimable has been torn down already. This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE and thus hold off further global OOM killer actions granted the oom reaper is able to take mmap_sem for the associated mm struct. This is not guaranteed now but further steps should make sure that mmap_sem for write should be blocked killable which will help to reduce such a lock contention. This is not done by this patch. Note that exit_oom_victim might be called on a remote task from __oom_reap_task now so we have to check and clear the flag atomically otherwise we might race and underflow oom_victims or wake up waiters too early. Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:27 +07:00
/*
* Drop our reference but make sure the mmput slow path is called from a
* different context because we shouldn't risk we get stuck there and
* put the oom_reaper out of the way.
*/
mm, oom_reaper: make sure that mmput_async is called only when memory was reaped Tetsuo is worried that mmput_async might still lead to a premature new oom victim selection due to the following race: __oom_reap_task exit_mm find_lock_task_mm atomic_inc(mm->mm_users) # = 2 task_unlock task_lock task->mm = NULL up_read(&mm->mmap_sem) < somebody write locks mmap_sem > task_unlock mmput atomic_dec_and_test # = 1 exit_oom_victim down_read_trylock # failed - no reclaim mmput_async # Takes unpredictable amount of time < new OOM situation > the final __mmput will be executed in the delayed context which might happen far in the future. Such a race is highly unlikely because the write holder of mmap_sem would have to be an external task (all direct holders are already killed or exiting) and it usually have to pin mm_users in order to do anything reasonable. We can, however, make sure that the mmput_async is only called when we do not back off and reap some memory. That would reduce the impact of the delayed __mmput because the real content would be already freed. Pin mm_count to keep it alive after we drop task_lock and before we try to get mmap_sem. If the mmap_sem succeeds we can try to grab mm_users reference and then go on with unmapping the address space. It is not clear whether this race is possible at all but it is better to be more robust and do not pin mm_users unless we are sure we are actually doing some real work during __oom_reap_task. Link: http://lkml.kernel.org/r/1465306987-30297-1-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:24:50 +07:00
mmput_async(mm);
unlock_oom:
mutex_unlock(&oom_lock);
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
return ret;
}
#define MAX_OOM_REAP_RETRIES 10
oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space When oom_reaper manages to unmap all the eligible vmas there shouldn't be much of the freable memory held by the oom victim left anymore so it makes sense to clear the TIF_MEMDIE flag for the victim and allow the OOM killer to select another task. The lack of TIF_MEMDIE also means that the victim cannot access memory reserves anymore but that shouldn't be a problem because it would get the access again if it needs to allocate and hits the OOM killer again due to the fatal_signal_pending resp. PF_EXITING check. We can safely hide the task from the OOM killer because it is clearly not a good candidate anymore as everyhing reclaimable has been torn down already. This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE and thus hold off further global OOM killer actions granted the oom reaper is able to take mmap_sem for the associated mm struct. This is not guaranteed now but further steps should make sure that mmap_sem for write should be blocked killable which will help to reduce such a lock contention. This is not done by this patch. Note that exit_oom_victim might be called on a remote task from __oom_reap_task now so we have to check and clear the flag atomically otherwise we might race and underflow oom_victims or wake up waiters too early. Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:27 +07:00
static void oom_reap_task(struct task_struct *tsk)
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
{
int attempts = 0;
oom: keep mm of the killed task available oom_reap_task has to call exit_oom_victim in order to make sure that the oom vicim will not block the oom killer for ever. This is, however, opening new problems (e.g oom_killer_disable exclusion - see commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race")). exit_oom_victim should be only called from the victim's context ideally. One way to achieve this would be to rely on per mm_struct flags. We already have MMF_OOM_REAPED to hide a task from the oom killer since "mm, oom: hide mm which is shared with kthread or global init". The problem is that the exit path: do_exit exit_mm tsk->mm = NULL; mmput __mmput exit_oom_victim doesn't guarantee that exit_oom_victim will get called in a bounded amount of time. At least exit_aio depends on IO which might get blocked due to lack of memory and who knows what else is lurking there. This patch takes a different approach. We remember tsk->mm into the signal_struct and bind it to the signal struct life time for all oom victims. __oom_reap_task_mm as well as oom_scan_process_thread do not have to rely on find_lock_task_mm anymore and they will have a reliable reference to the mm struct. As a result all the oom specific communication inside the OOM killer can be done via tsk->signal->oom_mm. Increasing the signal_struct for something as unlikely as the oom killer is far from ideal but this approach will make the code much more reasonable and long term we even might want to move task->mm into the signal_struct anyway. In the next step we might want to make the oom killer exclusion and access to memory reserves completely independent which would be also nice. Link: http://lkml.kernel.org/r/1472119394-11342-4-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:58:51 +07:00
struct mm_struct *mm = tsk->signal->oom_mm;
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
/* Retry the down_read_trylock(mmap_sem) a few times */
while (attempts++ < MAX_OOM_REAP_RETRIES && !__oom_reap_task_mm(tsk, mm))
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
schedule_timeout_idle(HZ/10);
if (attempts <= MAX_OOM_REAP_RETRIES)
goto done;
pr_info("oom_reaper: unable to reap pid:%d (%s)\n",
task_pid_nr(tsk), tsk->comm);
debug_show_all_locks();
done:
mm, oom_reaper: clear TIF_MEMDIE for all tasks queued for oom_reaper Right now the oom reaper will clear TIF_MEMDIE only for tasks which were successfully reaped. This is the safest option because we know that such an oom victim would only block forward progress of the oom killer without a good reason because it is highly unlikely it would release much more memory. Basically most of its memory has been already torn down. We can relax this assumption to catch more corner cases though. The first obvious one is when the oom victim clears its mm and gets stuck later on. oom_reaper would back of on find_lock_task_mm returning NULL. We can safely try to clear TIF_MEMDIE in this case because such a task would be ignored by the oom killer anyway. The flag would be cleared by that time already most of the time anyway. The less obvious one is when the oom reaper fails due to mmap_sem contention. Even if we clear TIF_MEMDIE for this task then it is not very likely that we would select another task too easily because we haven't reaped the last victim and so it would be still the #1 candidate. There is a rare race condition possible when the current victim terminates before the next select_bad_process but considering that oom_reap_task had retried several times before giving up then this sounds like a borderline thing. After this patch we should have a guarantee that the OOM killer will not be block for unbounded amount of time for most cases. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Raushaniya Maksudova <rmaksudova@parallels.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:13:15 +07:00
tsk->oom_reaper_list = NULL;
oom: keep mm of the killed task available oom_reap_task has to call exit_oom_victim in order to make sure that the oom vicim will not block the oom killer for ever. This is, however, opening new problems (e.g oom_killer_disable exclusion - see commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race")). exit_oom_victim should be only called from the victim's context ideally. One way to achieve this would be to rely on per mm_struct flags. We already have MMF_OOM_REAPED to hide a task from the oom killer since "mm, oom: hide mm which is shared with kthread or global init". The problem is that the exit path: do_exit exit_mm tsk->mm = NULL; mmput __mmput exit_oom_victim doesn't guarantee that exit_oom_victim will get called in a bounded amount of time. At least exit_aio depends on IO which might get blocked due to lack of memory and who knows what else is lurking there. This patch takes a different approach. We remember tsk->mm into the signal_struct and bind it to the signal struct life time for all oom victims. __oom_reap_task_mm as well as oom_scan_process_thread do not have to rely on find_lock_task_mm anymore and they will have a reliable reference to the mm struct. As a result all the oom specific communication inside the OOM killer can be done via tsk->signal->oom_mm. Increasing the signal_struct for something as unlikely as the oom killer is far from ideal but this approach will make the code much more reasonable and long term we even might want to move task->mm into the signal_struct anyway. In the next step we might want to make the oom killer exclusion and access to memory reserves completely independent which would be also nice. Link: http://lkml.kernel.org/r/1472119394-11342-4-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:58:51 +07:00
/*
* Hide this mm from OOM killer because it has been either reaped or
* somebody can't call up_write(mmap_sem).
*/
set_bit(MMF_OOM_SKIP, &mm->flags);
oom: keep mm of the killed task available oom_reap_task has to call exit_oom_victim in order to make sure that the oom vicim will not block the oom killer for ever. This is, however, opening new problems (e.g oom_killer_disable exclusion - see commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race")). exit_oom_victim should be only called from the victim's context ideally. One way to achieve this would be to rely on per mm_struct flags. We already have MMF_OOM_REAPED to hide a task from the oom killer since "mm, oom: hide mm which is shared with kthread or global init". The problem is that the exit path: do_exit exit_mm tsk->mm = NULL; mmput __mmput exit_oom_victim doesn't guarantee that exit_oom_victim will get called in a bounded amount of time. At least exit_aio depends on IO which might get blocked due to lack of memory and who knows what else is lurking there. This patch takes a different approach. We remember tsk->mm into the signal_struct and bind it to the signal struct life time for all oom victims. __oom_reap_task_mm as well as oom_scan_process_thread do not have to rely on find_lock_task_mm anymore and they will have a reliable reference to the mm struct. As a result all the oom specific communication inside the OOM killer can be done via tsk->signal->oom_mm. Increasing the signal_struct for something as unlikely as the oom killer is far from ideal but this approach will make the code much more reasonable and long term we even might want to move task->mm into the signal_struct anyway. In the next step we might want to make the oom killer exclusion and access to memory reserves completely independent which would be also nice. Link: http://lkml.kernel.org/r/1472119394-11342-4-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:58:51 +07:00
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
/* Drop a reference taken by wake_oom_reaper */
oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space When oom_reaper manages to unmap all the eligible vmas there shouldn't be much of the freable memory held by the oom victim left anymore so it makes sense to clear the TIF_MEMDIE flag for the victim and allow the OOM killer to select another task. The lack of TIF_MEMDIE also means that the victim cannot access memory reserves anymore but that shouldn't be a problem because it would get the access again if it needs to allocate and hits the OOM killer again due to the fatal_signal_pending resp. PF_EXITING check. We can safely hide the task from the OOM killer because it is clearly not a good candidate anymore as everyhing reclaimable has been torn down already. This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE and thus hold off further global OOM killer actions granted the oom reaper is able to take mmap_sem for the associated mm struct. This is not guaranteed now but further steps should make sure that mmap_sem for write should be blocked killable which will help to reduce such a lock contention. This is not done by this patch. Note that exit_oom_victim might be called on a remote task from __oom_reap_task now so we have to check and clear the flag atomically otherwise we might race and underflow oom_victims or wake up waiters too early. Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:27 +07:00
put_task_struct(tsk);
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
}
static int oom_reaper(void *unused)
{
while (true) {
mm, oom_reaper: implement OOM victims queuing wake_oom_reaper has allowed only 1 oom victim to be queued. The main reason for that was the simplicity as other solutions would require some way of queuing. The current approach is racy and that was deemed sufficient as the oom_reaper is considered a best effort approach to help with oom handling when the OOM victim cannot terminate in a reasonable time. The race could lead to missing an oom victim which can get stuck out_of_memory wake_oom_reaper cmpxchg // OK oom_reaper oom_reap_task __oom_reap_task oom_victim terminates atomic_inc_not_zero // fail out_of_memory wake_oom_reaper cmpxchg // fails task_to_reap = NULL This race requires 2 OOM invocations in a short time period which is not very likely but certainly not impossible. E.g. the original victim might have not released a lot of memory for some reason. The situation would improve considerably if wake_oom_reaper used a more robust queuing. This is what this patch implements. This means adding oom_reaper_list list_head into task_struct (eat a hole before embeded thread_struct for that purpose) and a oom_reaper_lock spinlock for queuing synchronization. wake_oom_reaper will then add the task on the queue and oom_reaper will dequeue it. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:33 +07:00
struct task_struct *tsk = NULL;
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
wait_event_freezable(oom_reaper_wait, oom_reaper_list != NULL);
mm, oom_reaper: implement OOM victims queuing wake_oom_reaper has allowed only 1 oom victim to be queued. The main reason for that was the simplicity as other solutions would require some way of queuing. The current approach is racy and that was deemed sufficient as the oom_reaper is considered a best effort approach to help with oom handling when the OOM victim cannot terminate in a reasonable time. The race could lead to missing an oom victim which can get stuck out_of_memory wake_oom_reaper cmpxchg // OK oom_reaper oom_reap_task __oom_reap_task oom_victim terminates atomic_inc_not_zero // fail out_of_memory wake_oom_reaper cmpxchg // fails task_to_reap = NULL This race requires 2 OOM invocations in a short time period which is not very likely but certainly not impossible. E.g. the original victim might have not released a lot of memory for some reason. The situation would improve considerably if wake_oom_reaper used a more robust queuing. This is what this patch implements. This means adding oom_reaper_list list_head into task_struct (eat a hole before embeded thread_struct for that purpose) and a oom_reaper_lock spinlock for queuing synchronization. wake_oom_reaper will then add the task on the queue and oom_reaper will dequeue it. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:33 +07:00
spin_lock(&oom_reaper_lock);
if (oom_reaper_list != NULL) {
tsk = oom_reaper_list;
oom_reaper_list = tsk->oom_reaper_list;
mm, oom_reaper: implement OOM victims queuing wake_oom_reaper has allowed only 1 oom victim to be queued. The main reason for that was the simplicity as other solutions would require some way of queuing. The current approach is racy and that was deemed sufficient as the oom_reaper is considered a best effort approach to help with oom handling when the OOM victim cannot terminate in a reasonable time. The race could lead to missing an oom victim which can get stuck out_of_memory wake_oom_reaper cmpxchg // OK oom_reaper oom_reap_task __oom_reap_task oom_victim terminates atomic_inc_not_zero // fail out_of_memory wake_oom_reaper cmpxchg // fails task_to_reap = NULL This race requires 2 OOM invocations in a short time period which is not very likely but certainly not impossible. E.g. the original victim might have not released a lot of memory for some reason. The situation would improve considerably if wake_oom_reaper used a more robust queuing. This is what this patch implements. This means adding oom_reaper_list list_head into task_struct (eat a hole before embeded thread_struct for that purpose) and a oom_reaper_lock spinlock for queuing synchronization. wake_oom_reaper will then add the task on the queue and oom_reaper will dequeue it. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:33 +07:00
}
spin_unlock(&oom_reaper_lock);
if (tsk)
oom_reap_task(tsk);
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
}
return 0;
}
static void wake_oom_reaper(struct task_struct *tsk)
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
{
if (!oom_reaper_th)
return;
/* tsk is already queued? */
if (tsk == oom_reaper_list || tsk->oom_reaper_list)
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
return;
oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space When oom_reaper manages to unmap all the eligible vmas there shouldn't be much of the freable memory held by the oom victim left anymore so it makes sense to clear the TIF_MEMDIE flag for the victim and allow the OOM killer to select another task. The lack of TIF_MEMDIE also means that the victim cannot access memory reserves anymore but that shouldn't be a problem because it would get the access again if it needs to allocate and hits the OOM killer again due to the fatal_signal_pending resp. PF_EXITING check. We can safely hide the task from the OOM killer because it is clearly not a good candidate anymore as everyhing reclaimable has been torn down already. This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE and thus hold off further global OOM killer actions granted the oom reaper is able to take mmap_sem for the associated mm struct. This is not guaranteed now but further steps should make sure that mmap_sem for write should be blocked killable which will help to reduce such a lock contention. This is not done by this patch. Note that exit_oom_victim might be called on a remote task from __oom_reap_task now so we have to check and clear the flag atomically otherwise we might race and underflow oom_victims or wake up waiters too early. Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:27 +07:00
get_task_struct(tsk);
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
mm, oom_reaper: implement OOM victims queuing wake_oom_reaper has allowed only 1 oom victim to be queued. The main reason for that was the simplicity as other solutions would require some way of queuing. The current approach is racy and that was deemed sufficient as the oom_reaper is considered a best effort approach to help with oom handling when the OOM victim cannot terminate in a reasonable time. The race could lead to missing an oom victim which can get stuck out_of_memory wake_oom_reaper cmpxchg // OK oom_reaper oom_reap_task __oom_reap_task oom_victim terminates atomic_inc_not_zero // fail out_of_memory wake_oom_reaper cmpxchg // fails task_to_reap = NULL This race requires 2 OOM invocations in a short time period which is not very likely but certainly not impossible. E.g. the original victim might have not released a lot of memory for some reason. The situation would improve considerably if wake_oom_reaper used a more robust queuing. This is what this patch implements. This means adding oom_reaper_list list_head into task_struct (eat a hole before embeded thread_struct for that purpose) and a oom_reaper_lock spinlock for queuing synchronization. wake_oom_reaper will then add the task on the queue and oom_reaper will dequeue it. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:33 +07:00
spin_lock(&oom_reaper_lock);
tsk->oom_reaper_list = oom_reaper_list;
oom_reaper_list = tsk;
mm, oom_reaper: implement OOM victims queuing wake_oom_reaper has allowed only 1 oom victim to be queued. The main reason for that was the simplicity as other solutions would require some way of queuing. The current approach is racy and that was deemed sufficient as the oom_reaper is considered a best effort approach to help with oom handling when the OOM victim cannot terminate in a reasonable time. The race could lead to missing an oom victim which can get stuck out_of_memory wake_oom_reaper cmpxchg // OK oom_reaper oom_reap_task __oom_reap_task oom_victim terminates atomic_inc_not_zero // fail out_of_memory wake_oom_reaper cmpxchg // fails task_to_reap = NULL This race requires 2 OOM invocations in a short time period which is not very likely but certainly not impossible. E.g. the original victim might have not released a lot of memory for some reason. The situation would improve considerably if wake_oom_reaper used a more robust queuing. This is what this patch implements. This means adding oom_reaper_list list_head into task_struct (eat a hole before embeded thread_struct for that purpose) and a oom_reaper_lock spinlock for queuing synchronization. wake_oom_reaper will then add the task on the queue and oom_reaper will dequeue it. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:33 +07:00
spin_unlock(&oom_reaper_lock);
wake_up(&oom_reaper_wait);
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
}
static int __init oom_init(void)
{
oom_reaper_th = kthread_run(oom_reaper, NULL, "oom_reaper");
if (IS_ERR(oom_reaper_th)) {
pr_err("Unable to start OOM reaper %ld. Continuing regardless\n",
PTR_ERR(oom_reaper_th));
oom_reaper_th = NULL;
}
return 0;
}
subsys_initcall(oom_init)
#else
static inline void wake_oom_reaper(struct task_struct *tsk)
{
}
#endif /* CONFIG_MMU */
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
oom: add helpers for setting and clearing TIF_MEMDIE This patchset addresses a race which was described in the changelog for 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend"): : PM freezer relies on having all tasks frozen by the time devices are : getting frozen so that no task will touch them while they are getting : frozen. But OOM killer is allowed to kill an already frozen task in order : to handle OOM situtation. In order to protect from late wake ups OOM : killer is disabled after all tasks are frozen. This, however, still keeps : a window open when a killed task didn't manage to die by the time : freeze_processes finishes. The original patch hasn't closed the race window completely because that would require a more complex solution as it can be seen by this patchset. The primary motivation was to close the race condition between OOM killer and PM freezer _completely_. As Tejun pointed out, even though the race condition is unlikely the harder it would be to debug weird bugs deep in the PM freezer when the debugging options are reduced considerably. I can only speculate what might happen when a task is still runnable unexpectedly. On a plus side and as a side effect the oom enable/disable has a better (full barrier) semantic without polluting hot paths. I have tested the series in KVM with 100M RAM: - many small tasks (20M anon mmap) which are triggering OOM continually - s2ram which resumes automatically is triggered in a loop echo processors > /sys/power/pm_test while true do echo mem > /sys/power/state sleep 1s done - simple module which allocates and frees 20M in 8K chunks. If it sees freezing(current) then it tries another round of allocation before calling try_to_freeze - debugging messages of PM stages and OOM killer enable/disable/fail added and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before it wakes up waiters. - rebased on top of the current mmotm which means some necessary updates in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but I think this should be OK because __thaw_task shouldn't interfere with any locking down wake_up_process. Oleg? As expected there are no OOM killed tasks after oom is disabled and allocations requested by the kernel thread are failing after all the tasks are frozen and OOM disabled. I wasn't able to catch a race where oom_killer_disable would really have to wait but I kinda expected the race is really unlikely. [ 242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB [ 243.628071] Unmarking 2992 OOM victim. oom_victims: 1 [ 243.636072] (elapsed 2.837 seconds) done. [ 243.641985] Trying to disable OOM killer [ 243.643032] Waiting for concurent OOM victims [ 243.644342] OOM killer disabled [ 243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done. [ 243.652983] Suspending console(s) (use no_console_suspend to debug) [ 243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010 [...] [ 243.992600] PM: suspend of devices complete after 336.667 msecs [ 243.993264] PM: late suspend of devices complete after 0.660 msecs [ 243.994713] PM: noirq suspend of devices complete after 1.446 msecs [ 243.994717] ACPI: Preparing to enter system sleep state S3 [ 243.994795] PM: Saving platform NVS memory [ 243.994796] Disabling non-boot CPUs ... The first 2 patches are simple cleanups for OOM. They should go in regardless the rest IMO. Patches 3 and 4 are trivial printk -> pr_info conversion and they should go in ditto. The main patch is the last one and I would appreciate acks from Tejun and Rafael. I think the OOM part should be OK (except for __thaw_task vs. task_lock where a look from Oleg would appreciated) but I am not so sure I haven't screwed anything in the freezer code. I have found several surprises there. This patch (of 5): This patch is just a preparatory and it doesn't introduce any functional change. Note: I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to wait for the oom victim and to prevent from new killing. This is just a side effect of the flag. The primary meaning is to give the oom victim access to the memory reserves and that shouldn't be necessary here. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:12 +07:00
/**
* mark_oom_victim - mark the given task as OOM victim
oom: add helpers for setting and clearing TIF_MEMDIE This patchset addresses a race which was described in the changelog for 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend"): : PM freezer relies on having all tasks frozen by the time devices are : getting frozen so that no task will touch them while they are getting : frozen. But OOM killer is allowed to kill an already frozen task in order : to handle OOM situtation. In order to protect from late wake ups OOM : killer is disabled after all tasks are frozen. This, however, still keeps : a window open when a killed task didn't manage to die by the time : freeze_processes finishes. The original patch hasn't closed the race window completely because that would require a more complex solution as it can be seen by this patchset. The primary motivation was to close the race condition between OOM killer and PM freezer _completely_. As Tejun pointed out, even though the race condition is unlikely the harder it would be to debug weird bugs deep in the PM freezer when the debugging options are reduced considerably. I can only speculate what might happen when a task is still runnable unexpectedly. On a plus side and as a side effect the oom enable/disable has a better (full barrier) semantic without polluting hot paths. I have tested the series in KVM with 100M RAM: - many small tasks (20M anon mmap) which are triggering OOM continually - s2ram which resumes automatically is triggered in a loop echo processors > /sys/power/pm_test while true do echo mem > /sys/power/state sleep 1s done - simple module which allocates and frees 20M in 8K chunks. If it sees freezing(current) then it tries another round of allocation before calling try_to_freeze - debugging messages of PM stages and OOM killer enable/disable/fail added and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before it wakes up waiters. - rebased on top of the current mmotm which means some necessary updates in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but I think this should be OK because __thaw_task shouldn't interfere with any locking down wake_up_process. Oleg? As expected there are no OOM killed tasks after oom is disabled and allocations requested by the kernel thread are failing after all the tasks are frozen and OOM disabled. I wasn't able to catch a race where oom_killer_disable would really have to wait but I kinda expected the race is really unlikely. [ 242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB [ 243.628071] Unmarking 2992 OOM victim. oom_victims: 1 [ 243.636072] (elapsed 2.837 seconds) done. [ 243.641985] Trying to disable OOM killer [ 243.643032] Waiting for concurent OOM victims [ 243.644342] OOM killer disabled [ 243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done. [ 243.652983] Suspending console(s) (use no_console_suspend to debug) [ 243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010 [...] [ 243.992600] PM: suspend of devices complete after 336.667 msecs [ 243.993264] PM: late suspend of devices complete after 0.660 msecs [ 243.994713] PM: noirq suspend of devices complete after 1.446 msecs [ 243.994717] ACPI: Preparing to enter system sleep state S3 [ 243.994795] PM: Saving platform NVS memory [ 243.994796] Disabling non-boot CPUs ... The first 2 patches are simple cleanups for OOM. They should go in regardless the rest IMO. Patches 3 and 4 are trivial printk -> pr_info conversion and they should go in ditto. The main patch is the last one and I would appreciate acks from Tejun and Rafael. I think the OOM part should be OK (except for __thaw_task vs. task_lock where a look from Oleg would appreciated) but I am not so sure I haven't screwed anything in the freezer code. I have found several surprises there. This patch (of 5): This patch is just a preparatory and it doesn't introduce any functional change. Note: I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to wait for the oom victim and to prevent from new killing. This is just a side effect of the flag. The primary meaning is to give the oom victim access to the memory reserves and that shouldn't be necessary here. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:12 +07:00
* @tsk: task to mark
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
*
* Has to be called with oom_lock held and never after
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
* oom has been disabled already.
oom: keep mm of the killed task available oom_reap_task has to call exit_oom_victim in order to make sure that the oom vicim will not block the oom killer for ever. This is, however, opening new problems (e.g oom_killer_disable exclusion - see commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race")). exit_oom_victim should be only called from the victim's context ideally. One way to achieve this would be to rely on per mm_struct flags. We already have MMF_OOM_REAPED to hide a task from the oom killer since "mm, oom: hide mm which is shared with kthread or global init". The problem is that the exit path: do_exit exit_mm tsk->mm = NULL; mmput __mmput exit_oom_victim doesn't guarantee that exit_oom_victim will get called in a bounded amount of time. At least exit_aio depends on IO which might get blocked due to lack of memory and who knows what else is lurking there. This patch takes a different approach. We remember tsk->mm into the signal_struct and bind it to the signal struct life time for all oom victims. __oom_reap_task_mm as well as oom_scan_process_thread do not have to rely on find_lock_task_mm anymore and they will have a reliable reference to the mm struct. As a result all the oom specific communication inside the OOM killer can be done via tsk->signal->oom_mm. Increasing the signal_struct for something as unlikely as the oom killer is far from ideal but this approach will make the code much more reasonable and long term we even might want to move task->mm into the signal_struct anyway. In the next step we might want to make the oom killer exclusion and access to memory reserves completely independent which would be also nice. Link: http://lkml.kernel.org/r/1472119394-11342-4-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:58:51 +07:00
*
* tsk->mm has to be non NULL and caller has to guarantee it is stable (either
* under task_lock or operate on the current).
oom: add helpers for setting and clearing TIF_MEMDIE This patchset addresses a race which was described in the changelog for 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend"): : PM freezer relies on having all tasks frozen by the time devices are : getting frozen so that no task will touch them while they are getting : frozen. But OOM killer is allowed to kill an already frozen task in order : to handle OOM situtation. In order to protect from late wake ups OOM : killer is disabled after all tasks are frozen. This, however, still keeps : a window open when a killed task didn't manage to die by the time : freeze_processes finishes. The original patch hasn't closed the race window completely because that would require a more complex solution as it can be seen by this patchset. The primary motivation was to close the race condition between OOM killer and PM freezer _completely_. As Tejun pointed out, even though the race condition is unlikely the harder it would be to debug weird bugs deep in the PM freezer when the debugging options are reduced considerably. I can only speculate what might happen when a task is still runnable unexpectedly. On a plus side and as a side effect the oom enable/disable has a better (full barrier) semantic without polluting hot paths. I have tested the series in KVM with 100M RAM: - many small tasks (20M anon mmap) which are triggering OOM continually - s2ram which resumes automatically is triggered in a loop echo processors > /sys/power/pm_test while true do echo mem > /sys/power/state sleep 1s done - simple module which allocates and frees 20M in 8K chunks. If it sees freezing(current) then it tries another round of allocation before calling try_to_freeze - debugging messages of PM stages and OOM killer enable/disable/fail added and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before it wakes up waiters. - rebased on top of the current mmotm which means some necessary updates in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but I think this should be OK because __thaw_task shouldn't interfere with any locking down wake_up_process. Oleg? As expected there are no OOM killed tasks after oom is disabled and allocations requested by the kernel thread are failing after all the tasks are frozen and OOM disabled. I wasn't able to catch a race where oom_killer_disable would really have to wait but I kinda expected the race is really unlikely. [ 242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB [ 243.628071] Unmarking 2992 OOM victim. oom_victims: 1 [ 243.636072] (elapsed 2.837 seconds) done. [ 243.641985] Trying to disable OOM killer [ 243.643032] Waiting for concurent OOM victims [ 243.644342] OOM killer disabled [ 243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done. [ 243.652983] Suspending console(s) (use no_console_suspend to debug) [ 243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010 [...] [ 243.992600] PM: suspend of devices complete after 336.667 msecs [ 243.993264] PM: late suspend of devices complete after 0.660 msecs [ 243.994713] PM: noirq suspend of devices complete after 1.446 msecs [ 243.994717] ACPI: Preparing to enter system sleep state S3 [ 243.994795] PM: Saving platform NVS memory [ 243.994796] Disabling non-boot CPUs ... The first 2 patches are simple cleanups for OOM. They should go in regardless the rest IMO. Patches 3 and 4 are trivial printk -> pr_info conversion and they should go in ditto. The main patch is the last one and I would appreciate acks from Tejun and Rafael. I think the OOM part should be OK (except for __thaw_task vs. task_lock where a look from Oleg would appreciated) but I am not so sure I haven't screwed anything in the freezer code. I have found several surprises there. This patch (of 5): This patch is just a preparatory and it doesn't introduce any functional change. Note: I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to wait for the oom victim and to prevent from new killing. This is just a side effect of the flag. The primary meaning is to give the oom victim access to the memory reserves and that shouldn't be necessary here. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:12 +07:00
*/
static void mark_oom_victim(struct task_struct *tsk)
oom: add helpers for setting and clearing TIF_MEMDIE This patchset addresses a race which was described in the changelog for 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend"): : PM freezer relies on having all tasks frozen by the time devices are : getting frozen so that no task will touch them while they are getting : frozen. But OOM killer is allowed to kill an already frozen task in order : to handle OOM situtation. In order to protect from late wake ups OOM : killer is disabled after all tasks are frozen. This, however, still keeps : a window open when a killed task didn't manage to die by the time : freeze_processes finishes. The original patch hasn't closed the race window completely because that would require a more complex solution as it can be seen by this patchset. The primary motivation was to close the race condition between OOM killer and PM freezer _completely_. As Tejun pointed out, even though the race condition is unlikely the harder it would be to debug weird bugs deep in the PM freezer when the debugging options are reduced considerably. I can only speculate what might happen when a task is still runnable unexpectedly. On a plus side and as a side effect the oom enable/disable has a better (full barrier) semantic without polluting hot paths. I have tested the series in KVM with 100M RAM: - many small tasks (20M anon mmap) which are triggering OOM continually - s2ram which resumes automatically is triggered in a loop echo processors > /sys/power/pm_test while true do echo mem > /sys/power/state sleep 1s done - simple module which allocates and frees 20M in 8K chunks. If it sees freezing(current) then it tries another round of allocation before calling try_to_freeze - debugging messages of PM stages and OOM killer enable/disable/fail added and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before it wakes up waiters. - rebased on top of the current mmotm which means some necessary updates in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but I think this should be OK because __thaw_task shouldn't interfere with any locking down wake_up_process. Oleg? As expected there are no OOM killed tasks after oom is disabled and allocations requested by the kernel thread are failing after all the tasks are frozen and OOM disabled. I wasn't able to catch a race where oom_killer_disable would really have to wait but I kinda expected the race is really unlikely. [ 242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB [ 243.628071] Unmarking 2992 OOM victim. oom_victims: 1 [ 243.636072] (elapsed 2.837 seconds) done. [ 243.641985] Trying to disable OOM killer [ 243.643032] Waiting for concurent OOM victims [ 243.644342] OOM killer disabled [ 243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done. [ 243.652983] Suspending console(s) (use no_console_suspend to debug) [ 243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010 [...] [ 243.992600] PM: suspend of devices complete after 336.667 msecs [ 243.993264] PM: late suspend of devices complete after 0.660 msecs [ 243.994713] PM: noirq suspend of devices complete after 1.446 msecs [ 243.994717] ACPI: Preparing to enter system sleep state S3 [ 243.994795] PM: Saving platform NVS memory [ 243.994796] Disabling non-boot CPUs ... The first 2 patches are simple cleanups for OOM. They should go in regardless the rest IMO. Patches 3 and 4 are trivial printk -> pr_info conversion and they should go in ditto. The main patch is the last one and I would appreciate acks from Tejun and Rafael. I think the OOM part should be OK (except for __thaw_task vs. task_lock where a look from Oleg would appreciated) but I am not so sure I haven't screwed anything in the freezer code. I have found several surprises there. This patch (of 5): This patch is just a preparatory and it doesn't introduce any functional change. Note: I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to wait for the oom victim and to prevent from new killing. This is just a side effect of the flag. The primary meaning is to give the oom victim access to the memory reserves and that shouldn't be necessary here. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:12 +07:00
{
oom: keep mm of the killed task available oom_reap_task has to call exit_oom_victim in order to make sure that the oom vicim will not block the oom killer for ever. This is, however, opening new problems (e.g oom_killer_disable exclusion - see commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race")). exit_oom_victim should be only called from the victim's context ideally. One way to achieve this would be to rely on per mm_struct flags. We already have MMF_OOM_REAPED to hide a task from the oom killer since "mm, oom: hide mm which is shared with kthread or global init". The problem is that the exit path: do_exit exit_mm tsk->mm = NULL; mmput __mmput exit_oom_victim doesn't guarantee that exit_oom_victim will get called in a bounded amount of time. At least exit_aio depends on IO which might get blocked due to lack of memory and who knows what else is lurking there. This patch takes a different approach. We remember tsk->mm into the signal_struct and bind it to the signal struct life time for all oom victims. __oom_reap_task_mm as well as oom_scan_process_thread do not have to rely on find_lock_task_mm anymore and they will have a reliable reference to the mm struct. As a result all the oom specific communication inside the OOM killer can be done via tsk->signal->oom_mm. Increasing the signal_struct for something as unlikely as the oom killer is far from ideal but this approach will make the code much more reasonable and long term we even might want to move task->mm into the signal_struct anyway. In the next step we might want to make the oom killer exclusion and access to memory reserves completely independent which would be also nice. Link: http://lkml.kernel.org/r/1472119394-11342-4-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:58:51 +07:00
struct mm_struct *mm = tsk->mm;
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
WARN_ON(oom_killer_disabled);
/* OOM killer might race with memcg OOM */
if (test_and_set_tsk_thread_flag(tsk, TIF_MEMDIE))
return;
oom: keep mm of the killed task available oom_reap_task has to call exit_oom_victim in order to make sure that the oom vicim will not block the oom killer for ever. This is, however, opening new problems (e.g oom_killer_disable exclusion - see commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race")). exit_oom_victim should be only called from the victim's context ideally. One way to achieve this would be to rely on per mm_struct flags. We already have MMF_OOM_REAPED to hide a task from the oom killer since "mm, oom: hide mm which is shared with kthread or global init". The problem is that the exit path: do_exit exit_mm tsk->mm = NULL; mmput __mmput exit_oom_victim doesn't guarantee that exit_oom_victim will get called in a bounded amount of time. At least exit_aio depends on IO which might get blocked due to lack of memory and who knows what else is lurking there. This patch takes a different approach. We remember tsk->mm into the signal_struct and bind it to the signal struct life time for all oom victims. __oom_reap_task_mm as well as oom_scan_process_thread do not have to rely on find_lock_task_mm anymore and they will have a reliable reference to the mm struct. As a result all the oom specific communication inside the OOM killer can be done via tsk->signal->oom_mm. Increasing the signal_struct for something as unlikely as the oom killer is far from ideal but this approach will make the code much more reasonable and long term we even might want to move task->mm into the signal_struct anyway. In the next step we might want to make the oom killer exclusion and access to memory reserves completely independent which would be also nice. Link: http://lkml.kernel.org/r/1472119394-11342-4-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:58:51 +07:00
/* oom_mm is bound to the signal struct life time. */
if (!cmpxchg(&tsk->signal->oom_mm, NULL, mm))
mmgrab(tsk->signal->oom_mm);
oom: keep mm of the killed task available oom_reap_task has to call exit_oom_victim in order to make sure that the oom vicim will not block the oom killer for ever. This is, however, opening new problems (e.g oom_killer_disable exclusion - see commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race")). exit_oom_victim should be only called from the victim's context ideally. One way to achieve this would be to rely on per mm_struct flags. We already have MMF_OOM_REAPED to hide a task from the oom killer since "mm, oom: hide mm which is shared with kthread or global init". The problem is that the exit path: do_exit exit_mm tsk->mm = NULL; mmput __mmput exit_oom_victim doesn't guarantee that exit_oom_victim will get called in a bounded amount of time. At least exit_aio depends on IO which might get blocked due to lack of memory and who knows what else is lurking there. This patch takes a different approach. We remember tsk->mm into the signal_struct and bind it to the signal struct life time for all oom victims. __oom_reap_task_mm as well as oom_scan_process_thread do not have to rely on find_lock_task_mm anymore and they will have a reliable reference to the mm struct. As a result all the oom specific communication inside the OOM killer can be done via tsk->signal->oom_mm. Increasing the signal_struct for something as unlikely as the oom killer is far from ideal but this approach will make the code much more reasonable and long term we even might want to move task->mm into the signal_struct anyway. In the next step we might want to make the oom killer exclusion and access to memory reserves completely independent which would be also nice. Link: http://lkml.kernel.org/r/1472119394-11342-4-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:58:51 +07:00
/*
* Make sure that the task is woken up from uninterruptible sleep
* if it is frozen because OOM killer wouldn't be able to free
* any memory and livelock. freezing_slow_path will tell the freezer
* that TIF_MEMDIE tasks should be ignored.
*/
__thaw_task(tsk);
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
atomic_inc(&oom_victims);
oom: add helpers for setting and clearing TIF_MEMDIE This patchset addresses a race which was described in the changelog for 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend"): : PM freezer relies on having all tasks frozen by the time devices are : getting frozen so that no task will touch them while they are getting : frozen. But OOM killer is allowed to kill an already frozen task in order : to handle OOM situtation. In order to protect from late wake ups OOM : killer is disabled after all tasks are frozen. This, however, still keeps : a window open when a killed task didn't manage to die by the time : freeze_processes finishes. The original patch hasn't closed the race window completely because that would require a more complex solution as it can be seen by this patchset. The primary motivation was to close the race condition between OOM killer and PM freezer _completely_. As Tejun pointed out, even though the race condition is unlikely the harder it would be to debug weird bugs deep in the PM freezer when the debugging options are reduced considerably. I can only speculate what might happen when a task is still runnable unexpectedly. On a plus side and as a side effect the oom enable/disable has a better (full barrier) semantic without polluting hot paths. I have tested the series in KVM with 100M RAM: - many small tasks (20M anon mmap) which are triggering OOM continually - s2ram which resumes automatically is triggered in a loop echo processors > /sys/power/pm_test while true do echo mem > /sys/power/state sleep 1s done - simple module which allocates and frees 20M in 8K chunks. If it sees freezing(current) then it tries another round of allocation before calling try_to_freeze - debugging messages of PM stages and OOM killer enable/disable/fail added and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before it wakes up waiters. - rebased on top of the current mmotm which means some necessary updates in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but I think this should be OK because __thaw_task shouldn't interfere with any locking down wake_up_process. Oleg? As expected there are no OOM killed tasks after oom is disabled and allocations requested by the kernel thread are failing after all the tasks are frozen and OOM disabled. I wasn't able to catch a race where oom_killer_disable would really have to wait but I kinda expected the race is really unlikely. [ 242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB [ 243.628071] Unmarking 2992 OOM victim. oom_victims: 1 [ 243.636072] (elapsed 2.837 seconds) done. [ 243.641985] Trying to disable OOM killer [ 243.643032] Waiting for concurent OOM victims [ 243.644342] OOM killer disabled [ 243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done. [ 243.652983] Suspending console(s) (use no_console_suspend to debug) [ 243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010 [...] [ 243.992600] PM: suspend of devices complete after 336.667 msecs [ 243.993264] PM: late suspend of devices complete after 0.660 msecs [ 243.994713] PM: noirq suspend of devices complete after 1.446 msecs [ 243.994717] ACPI: Preparing to enter system sleep state S3 [ 243.994795] PM: Saving platform NVS memory [ 243.994796] Disabling non-boot CPUs ... The first 2 patches are simple cleanups for OOM. They should go in regardless the rest IMO. Patches 3 and 4 are trivial printk -> pr_info conversion and they should go in ditto. The main patch is the last one and I would appreciate acks from Tejun and Rafael. I think the OOM part should be OK (except for __thaw_task vs. task_lock where a look from Oleg would appreciated) but I am not so sure I haven't screwed anything in the freezer code. I have found several surprises there. This patch (of 5): This patch is just a preparatory and it doesn't introduce any functional change. Note: I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to wait for the oom victim and to prevent from new killing. This is just a side effect of the flag. The primary meaning is to give the oom victim access to the memory reserves and that shouldn't be necessary here. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:12 +07:00
}
/**
* exit_oom_victim - note the exit of an OOM victim
oom: add helpers for setting and clearing TIF_MEMDIE This patchset addresses a race which was described in the changelog for 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend"): : PM freezer relies on having all tasks frozen by the time devices are : getting frozen so that no task will touch them while they are getting : frozen. But OOM killer is allowed to kill an already frozen task in order : to handle OOM situtation. In order to protect from late wake ups OOM : killer is disabled after all tasks are frozen. This, however, still keeps : a window open when a killed task didn't manage to die by the time : freeze_processes finishes. The original patch hasn't closed the race window completely because that would require a more complex solution as it can be seen by this patchset. The primary motivation was to close the race condition between OOM killer and PM freezer _completely_. As Tejun pointed out, even though the race condition is unlikely the harder it would be to debug weird bugs deep in the PM freezer when the debugging options are reduced considerably. I can only speculate what might happen when a task is still runnable unexpectedly. On a plus side and as a side effect the oom enable/disable has a better (full barrier) semantic without polluting hot paths. I have tested the series in KVM with 100M RAM: - many small tasks (20M anon mmap) which are triggering OOM continually - s2ram which resumes automatically is triggered in a loop echo processors > /sys/power/pm_test while true do echo mem > /sys/power/state sleep 1s done - simple module which allocates and frees 20M in 8K chunks. If it sees freezing(current) then it tries another round of allocation before calling try_to_freeze - debugging messages of PM stages and OOM killer enable/disable/fail added and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before it wakes up waiters. - rebased on top of the current mmotm which means some necessary updates in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but I think this should be OK because __thaw_task shouldn't interfere with any locking down wake_up_process. Oleg? As expected there are no OOM killed tasks after oom is disabled and allocations requested by the kernel thread are failing after all the tasks are frozen and OOM disabled. I wasn't able to catch a race where oom_killer_disable would really have to wait but I kinda expected the race is really unlikely. [ 242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB [ 243.628071] Unmarking 2992 OOM victim. oom_victims: 1 [ 243.636072] (elapsed 2.837 seconds) done. [ 243.641985] Trying to disable OOM killer [ 243.643032] Waiting for concurent OOM victims [ 243.644342] OOM killer disabled [ 243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done. [ 243.652983] Suspending console(s) (use no_console_suspend to debug) [ 243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010 [...] [ 243.992600] PM: suspend of devices complete after 336.667 msecs [ 243.993264] PM: late suspend of devices complete after 0.660 msecs [ 243.994713] PM: noirq suspend of devices complete after 1.446 msecs [ 243.994717] ACPI: Preparing to enter system sleep state S3 [ 243.994795] PM: Saving platform NVS memory [ 243.994796] Disabling non-boot CPUs ... The first 2 patches are simple cleanups for OOM. They should go in regardless the rest IMO. Patches 3 and 4 are trivial printk -> pr_info conversion and they should go in ditto. The main patch is the last one and I would appreciate acks from Tejun and Rafael. I think the OOM part should be OK (except for __thaw_task vs. task_lock where a look from Oleg would appreciated) but I am not so sure I haven't screwed anything in the freezer code. I have found several surprises there. This patch (of 5): This patch is just a preparatory and it doesn't introduce any functional change. Note: I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to wait for the oom victim and to prevent from new killing. This is just a side effect of the flag. The primary meaning is to give the oom victim access to the memory reserves and that shouldn't be necessary here. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:12 +07:00
*/
void exit_oom_victim(void)
oom: add helpers for setting and clearing TIF_MEMDIE This patchset addresses a race which was described in the changelog for 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend"): : PM freezer relies on having all tasks frozen by the time devices are : getting frozen so that no task will touch them while they are getting : frozen. But OOM killer is allowed to kill an already frozen task in order : to handle OOM situtation. In order to protect from late wake ups OOM : killer is disabled after all tasks are frozen. This, however, still keeps : a window open when a killed task didn't manage to die by the time : freeze_processes finishes. The original patch hasn't closed the race window completely because that would require a more complex solution as it can be seen by this patchset. The primary motivation was to close the race condition between OOM killer and PM freezer _completely_. As Tejun pointed out, even though the race condition is unlikely the harder it would be to debug weird bugs deep in the PM freezer when the debugging options are reduced considerably. I can only speculate what might happen when a task is still runnable unexpectedly. On a plus side and as a side effect the oom enable/disable has a better (full barrier) semantic without polluting hot paths. I have tested the series in KVM with 100M RAM: - many small tasks (20M anon mmap) which are triggering OOM continually - s2ram which resumes automatically is triggered in a loop echo processors > /sys/power/pm_test while true do echo mem > /sys/power/state sleep 1s done - simple module which allocates and frees 20M in 8K chunks. If it sees freezing(current) then it tries another round of allocation before calling try_to_freeze - debugging messages of PM stages and OOM killer enable/disable/fail added and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before it wakes up waiters. - rebased on top of the current mmotm which means some necessary updates in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but I think this should be OK because __thaw_task shouldn't interfere with any locking down wake_up_process. Oleg? As expected there are no OOM killed tasks after oom is disabled and allocations requested by the kernel thread are failing after all the tasks are frozen and OOM disabled. I wasn't able to catch a race where oom_killer_disable would really have to wait but I kinda expected the race is really unlikely. [ 242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB [ 243.628071] Unmarking 2992 OOM victim. oom_victims: 1 [ 243.636072] (elapsed 2.837 seconds) done. [ 243.641985] Trying to disable OOM killer [ 243.643032] Waiting for concurent OOM victims [ 243.644342] OOM killer disabled [ 243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done. [ 243.652983] Suspending console(s) (use no_console_suspend to debug) [ 243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010 [...] [ 243.992600] PM: suspend of devices complete after 336.667 msecs [ 243.993264] PM: late suspend of devices complete after 0.660 msecs [ 243.994713] PM: noirq suspend of devices complete after 1.446 msecs [ 243.994717] ACPI: Preparing to enter system sleep state S3 [ 243.994795] PM: Saving platform NVS memory [ 243.994796] Disabling non-boot CPUs ... The first 2 patches are simple cleanups for OOM. They should go in regardless the rest IMO. Patches 3 and 4 are trivial printk -> pr_info conversion and they should go in ditto. The main patch is the last one and I would appreciate acks from Tejun and Rafael. I think the OOM part should be OK (except for __thaw_task vs. task_lock where a look from Oleg would appreciated) but I am not so sure I haven't screwed anything in the freezer code. I have found several surprises there. This patch (of 5): This patch is just a preparatory and it doesn't introduce any functional change. Note: I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to wait for the oom victim and to prevent from new killing. This is just a side effect of the flag. The primary meaning is to give the oom victim access to the memory reserves and that shouldn't be necessary here. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:12 +07:00
{
clear_thread_flag(TIF_MEMDIE);
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
if (!atomic_dec_return(&oom_victims))
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
wake_up_all(&oom_victims_wait);
}
oom, suspend: fix oom_killer_disable vs. pm suspend properly Commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race") has workaround an existing race between oom_killer_disable and oom_reaper by adding another round of try_to_freeze_tasks after the oom killer was disabled. This was the easiest thing to do for a late 4.7 fix. Let's fix it properly now. After "oom: keep mm of the killed task available" we no longer have to call exit_oom_victim from the oom reaper because we have stable mm available and hide the oom_reaped mm by MMF_OOM_SKIP flag. So let's remove exit_oom_victim and the race described in the above commit doesn't exist anymore if. Unfortunately this alone is not sufficient for the oom_killer_disable usecase because now we do not have any reliable way to reach exit_oom_victim (the victim might get stuck on a way to exit for an unbounded amount of time). OOM killer can cope with that by checking mm flags and move on to another victim but we cannot do the same for oom_killer_disable as we would lose the guarantee of no further interference of the victim with the rest of the system. What we can do instead is to cap the maximum time the oom_killer_disable waits for victims. The only current user of this function (pm suspend) already has a concept of timeout for back off so we can reuse the same value there. Let's drop set_freezable for the oom_reaper kthread because it is no longer needed as the reaper doesn't wake or thaw any processes. Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:59:00 +07:00
/**
* oom_killer_enable - enable OOM killer
*/
void oom_killer_enable(void)
{
oom_killer_disabled = false;
}
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
/**
* oom_killer_disable - disable OOM killer
oom, suspend: fix oom_killer_disable vs. pm suspend properly Commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race") has workaround an existing race between oom_killer_disable and oom_reaper by adding another round of try_to_freeze_tasks after the oom killer was disabled. This was the easiest thing to do for a late 4.7 fix. Let's fix it properly now. After "oom: keep mm of the killed task available" we no longer have to call exit_oom_victim from the oom reaper because we have stable mm available and hide the oom_reaped mm by MMF_OOM_SKIP flag. So let's remove exit_oom_victim and the race described in the above commit doesn't exist anymore if. Unfortunately this alone is not sufficient for the oom_killer_disable usecase because now we do not have any reliable way to reach exit_oom_victim (the victim might get stuck on a way to exit for an unbounded amount of time). OOM killer can cope with that by checking mm flags and move on to another victim but we cannot do the same for oom_killer_disable as we would lose the guarantee of no further interference of the victim with the rest of the system. What we can do instead is to cap the maximum time the oom_killer_disable waits for victims. The only current user of this function (pm suspend) already has a concept of timeout for back off so we can reuse the same value there. Let's drop set_freezable for the oom_reaper kthread because it is no longer needed as the reaper doesn't wake or thaw any processes. Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:59:00 +07:00
* @timeout: maximum timeout to wait for oom victims in jiffies
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
*
* Forces all page allocations to fail rather than trigger OOM killer.
oom, suspend: fix oom_killer_disable vs. pm suspend properly Commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race") has workaround an existing race between oom_killer_disable and oom_reaper by adding another round of try_to_freeze_tasks after the oom killer was disabled. This was the easiest thing to do for a late 4.7 fix. Let's fix it properly now. After "oom: keep mm of the killed task available" we no longer have to call exit_oom_victim from the oom reaper because we have stable mm available and hide the oom_reaped mm by MMF_OOM_SKIP flag. So let's remove exit_oom_victim and the race described in the above commit doesn't exist anymore if. Unfortunately this alone is not sufficient for the oom_killer_disable usecase because now we do not have any reliable way to reach exit_oom_victim (the victim might get stuck on a way to exit for an unbounded amount of time). OOM killer can cope with that by checking mm flags and move on to another victim but we cannot do the same for oom_killer_disable as we would lose the guarantee of no further interference of the victim with the rest of the system. What we can do instead is to cap the maximum time the oom_killer_disable waits for victims. The only current user of this function (pm suspend) already has a concept of timeout for back off so we can reuse the same value there. Let's drop set_freezable for the oom_reaper kthread because it is no longer needed as the reaper doesn't wake or thaw any processes. Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:59:00 +07:00
* Will block and wait until all OOM victims are killed or the given
* timeout expires.
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
*
* The function cannot be called when there are runnable user tasks because
* the userspace would see unexpected allocation failures as a result. Any
* new usage of this function should be consulted with MM people.
*
* Returns true if successful and false if the OOM killer cannot be
* disabled.
*/
oom, suspend: fix oom_killer_disable vs. pm suspend properly Commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race") has workaround an existing race between oom_killer_disable and oom_reaper by adding another round of try_to_freeze_tasks after the oom killer was disabled. This was the easiest thing to do for a late 4.7 fix. Let's fix it properly now. After "oom: keep mm of the killed task available" we no longer have to call exit_oom_victim from the oom reaper because we have stable mm available and hide the oom_reaped mm by MMF_OOM_SKIP flag. So let's remove exit_oom_victim and the race described in the above commit doesn't exist anymore if. Unfortunately this alone is not sufficient for the oom_killer_disable usecase because now we do not have any reliable way to reach exit_oom_victim (the victim might get stuck on a way to exit for an unbounded amount of time). OOM killer can cope with that by checking mm flags and move on to another victim but we cannot do the same for oom_killer_disable as we would lose the guarantee of no further interference of the victim with the rest of the system. What we can do instead is to cap the maximum time the oom_killer_disable waits for victims. The only current user of this function (pm suspend) already has a concept of timeout for back off so we can reuse the same value there. Let's drop set_freezable for the oom_reaper kthread because it is no longer needed as the reaper doesn't wake or thaw any processes. Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:59:00 +07:00
bool oom_killer_disable(signed long timeout)
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
{
oom, suspend: fix oom_killer_disable vs. pm suspend properly Commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race") has workaround an existing race between oom_killer_disable and oom_reaper by adding another round of try_to_freeze_tasks after the oom killer was disabled. This was the easiest thing to do for a late 4.7 fix. Let's fix it properly now. After "oom: keep mm of the killed task available" we no longer have to call exit_oom_victim from the oom reaper because we have stable mm available and hide the oom_reaped mm by MMF_OOM_SKIP flag. So let's remove exit_oom_victim and the race described in the above commit doesn't exist anymore if. Unfortunately this alone is not sufficient for the oom_killer_disable usecase because now we do not have any reliable way to reach exit_oom_victim (the victim might get stuck on a way to exit for an unbounded amount of time). OOM killer can cope with that by checking mm flags and move on to another victim but we cannot do the same for oom_killer_disable as we would lose the guarantee of no further interference of the victim with the rest of the system. What we can do instead is to cap the maximum time the oom_killer_disable waits for victims. The only current user of this function (pm suspend) already has a concept of timeout for back off so we can reuse the same value there. Let's drop set_freezable for the oom_reaper kthread because it is no longer needed as the reaper doesn't wake or thaw any processes. Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:59:00 +07:00
signed long ret;
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
/*
* Make sure to not race with an ongoing OOM killer. Check that the
* current is not killed (possibly due to sharing the victim's memory).
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
*/
if (mutex_lock_killable(&oom_lock))
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
return false;
oom_killer_disabled = true;
mutex_unlock(&oom_lock);
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
oom, suspend: fix oom_killer_disable vs. pm suspend properly Commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race") has workaround an existing race between oom_killer_disable and oom_reaper by adding another round of try_to_freeze_tasks after the oom killer was disabled. This was the easiest thing to do for a late 4.7 fix. Let's fix it properly now. After "oom: keep mm of the killed task available" we no longer have to call exit_oom_victim from the oom reaper because we have stable mm available and hide the oom_reaped mm by MMF_OOM_SKIP flag. So let's remove exit_oom_victim and the race described in the above commit doesn't exist anymore if. Unfortunately this alone is not sufficient for the oom_killer_disable usecase because now we do not have any reliable way to reach exit_oom_victim (the victim might get stuck on a way to exit for an unbounded amount of time). OOM killer can cope with that by checking mm flags and move on to another victim but we cannot do the same for oom_killer_disable as we would lose the guarantee of no further interference of the victim with the rest of the system. What we can do instead is to cap the maximum time the oom_killer_disable waits for victims. The only current user of this function (pm suspend) already has a concept of timeout for back off so we can reuse the same value there. Let's drop set_freezable for the oom_reaper kthread because it is no longer needed as the reaper doesn't wake or thaw any processes. Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 06:59:00 +07:00
ret = wait_event_interruptible_timeout(oom_victims_wait,
!atomic_read(&oom_victims), timeout);
if (ret <= 0) {
oom_killer_enable();
return false;
}
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
return true;
}
static inline bool __task_will_free_mem(struct task_struct *task)
{
struct signal_struct *sig = task->signal;
/*
* A coredumping process may sleep for an extended period in exit_mm(),
* so the oom killer cannot assume that the process will promptly exit
* and release memory.
*/
if (sig->flags & SIGNAL_GROUP_COREDUMP)
return false;
if (sig->flags & SIGNAL_GROUP_EXIT)
return true;
if (thread_group_empty(task) && (task->flags & PF_EXITING))
return true;
return false;
}
/*
* Checks whether the given task is dying or exiting and likely to
* release its address space. This means that all threads and processes
* sharing the same mm have to be killed or exiting.
* Caller has to make sure that task->mm is stable (hold task_lock or
* it operates on the current).
*/
static bool task_will_free_mem(struct task_struct *task)
{
struct mm_struct *mm = task->mm;
struct task_struct *p;
bool ret = true;
/*
* Skip tasks without mm because it might have passed its exit_mm and
* exit_oom_victim. oom_reaper could have rescued that but do not rely
* on that for now. We can consider find_lock_task_mm in future.
*/
if (!mm)
return false;
if (!__task_will_free_mem(task))
return false;
mm, oom: task_will_free_mem should skip oom_reaped tasks The 0-day robot has encountered the following: Out of memory: Kill process 3914 (trinity-c0) score 167 or sacrifice child Killed process 3914 (trinity-c0) total-vm:55864kB, anon-rss:1512kB, file-rss:1088kB, shmem-rss:25616kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:26488kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:26900kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:26900kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:27296kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:28148kB oom_reaper is trying to reap the same task again and again. This is possible only when the oom killer is bypassed because of task_will_free_mem because we skip over tasks with MMF_OOM_REAPED already set during select_bad_process. Teach task_will_free_mem to skip over MMF_OOM_REAPED tasks as well because they will be unlikely to free anything more. Analyzed by Tetsuo Handa. Link: http://lkml.kernel.org/r/1466426628-15074-9-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:44:55 +07:00
/*
* This task has already been drained by the oom reaper so there are
* only small chances it will free some more
*/
if (test_bit(MMF_OOM_SKIP, &mm->flags))
mm, oom: task_will_free_mem should skip oom_reaped tasks The 0-day robot has encountered the following: Out of memory: Kill process 3914 (trinity-c0) score 167 or sacrifice child Killed process 3914 (trinity-c0) total-vm:55864kB, anon-rss:1512kB, file-rss:1088kB, shmem-rss:25616kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:26488kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:26900kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:26900kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:27296kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:28148kB oom_reaper is trying to reap the same task again and again. This is possible only when the oom killer is bypassed because of task_will_free_mem because we skip over tasks with MMF_OOM_REAPED already set during select_bad_process. Teach task_will_free_mem to skip over MMF_OOM_REAPED tasks as well because they will be unlikely to free anything more. Analyzed by Tetsuo Handa. Link: http://lkml.kernel.org/r/1466426628-15074-9-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:44:55 +07:00
return false;
if (atomic_read(&mm->mm_users) <= 1)
return true;
/*
* Make sure that all tasks which share the mm with the given tasks
* are dying as well to make sure that a) nobody pins its mm and
* b) the task is also reapable by the oom reaper.
*/
rcu_read_lock();
for_each_process(p) {
if (!process_shares_mm(p, mm))
continue;
if (same_thread_group(task, p))
continue;
ret = __task_will_free_mem(p);
if (!ret)
break;
}
rcu_read_unlock();
return ret;
}
static void oom_kill_process(struct oom_control *oc, const char *message)
{
struct task_struct *p = oc->chosen;
unsigned int points = oc->chosen_points;
struct task_struct *victim = p;
oom: sacrifice child with highest badness score for parent When a task is chosen for oom kill, the oom killer first attempts to sacrifice a child not sharing its parent's memory instead. Unfortunately, this often kills in a seemingly random fashion based on the ordering of the selected task's child list. Additionally, it is not guaranteed at all to free a large amount of memory that we need to prevent additional oom killing in the very near future. Instead, we now only attempt to sacrifice the worst child not sharing its parent's memory, if one exists. The worst child is indicated with the highest badness() score. This serves two advantages: we kill a memory-hogging task more often, and we allow the configurable /proc/pid/oom_adj value to be considered as a factor in which child to kill. Reviewers may observe that the previous implementation would iterate through the children and attempt to kill each until one was successful and then the parent if none were found while the new code simply kills the most memory-hogging task or the parent. Note that the only time oom_kill_task() fails, however, is when a child does not have an mm or has a /proc/pid/oom_adj of OOM_DISABLE. badness() returns 0 for both cases, so the final oom_kill_task() will always succeed. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:51 +07:00
struct task_struct *child;
struct task_struct *t;
struct mm_struct *mm;
unsigned int victim_points = 0;
static DEFINE_RATELIMIT_STATE(oom_rs, DEFAULT_RATELIMIT_INTERVAL,
DEFAULT_RATELIMIT_BURST);
bool can_oom_reap = true;
/*
* If the task is already exiting, don't alarm the sysadmin or kill
* its children or threads, just set TIF_MEMDIE so it can die quickly
*/
task_lock(p);
if (task_will_free_mem(p)) {
mark_oom_victim(p);
wake_oom_reaper(p);
task_unlock(p);
put_task_struct(p);
return;
}
task_unlock(p);
if (__ratelimit(&oom_rs))
dump_header(oc, p);
pr_err("%s: Kill process %d (%s) score %u or sacrifice child\n",
oom: sacrifice child with highest badness score for parent When a task is chosen for oom kill, the oom killer first attempts to sacrifice a child not sharing its parent's memory instead. Unfortunately, this often kills in a seemingly random fashion based on the ordering of the selected task's child list. Additionally, it is not guaranteed at all to free a large amount of memory that we need to prevent additional oom killing in the very near future. Instead, we now only attempt to sacrifice the worst child not sharing its parent's memory, if one exists. The worst child is indicated with the highest badness() score. This serves two advantages: we kill a memory-hogging task more often, and we allow the configurable /proc/pid/oom_adj value to be considered as a factor in which child to kill. Reviewers may observe that the previous implementation would iterate through the children and attempt to kill each until one was successful and then the parent if none were found while the new code simply kills the most memory-hogging task or the parent. Note that the only time oom_kill_task() fails, however, is when a child does not have an mm or has a /proc/pid/oom_adj of OOM_DISABLE. badness() returns 0 for both cases, so the final oom_kill_task() will always succeed. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:51 +07:00
message, task_pid_nr(p), p->comm, points);
oom: sacrifice child with highest badness score for parent When a task is chosen for oom kill, the oom killer first attempts to sacrifice a child not sharing its parent's memory instead. Unfortunately, this often kills in a seemingly random fashion based on the ordering of the selected task's child list. Additionally, it is not guaranteed at all to free a large amount of memory that we need to prevent additional oom killing in the very near future. Instead, we now only attempt to sacrifice the worst child not sharing its parent's memory, if one exists. The worst child is indicated with the highest badness() score. This serves two advantages: we kill a memory-hogging task more often, and we allow the configurable /proc/pid/oom_adj value to be considered as a factor in which child to kill. Reviewers may observe that the previous implementation would iterate through the children and attempt to kill each until one was successful and then the parent if none were found while the new code simply kills the most memory-hogging task or the parent. Note that the only time oom_kill_task() fails, however, is when a child does not have an mm or has a /proc/pid/oom_adj of OOM_DISABLE. badness() returns 0 for both cases, so the final oom_kill_task() will always succeed. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:51 +07:00
/*
* If any of p's children has a different mm and is eligible for kill,
* the one with the highest oom_badness() score is sacrificed for its
oom: sacrifice child with highest badness score for parent When a task is chosen for oom kill, the oom killer first attempts to sacrifice a child not sharing its parent's memory instead. Unfortunately, this often kills in a seemingly random fashion based on the ordering of the selected task's child list. Additionally, it is not guaranteed at all to free a large amount of memory that we need to prevent additional oom killing in the very near future. Instead, we now only attempt to sacrifice the worst child not sharing its parent's memory, if one exists. The worst child is indicated with the highest badness() score. This serves two advantages: we kill a memory-hogging task more often, and we allow the configurable /proc/pid/oom_adj value to be considered as a factor in which child to kill. Reviewers may observe that the previous implementation would iterate through the children and attempt to kill each until one was successful and then the parent if none were found while the new code simply kills the most memory-hogging task or the parent. Note that the only time oom_kill_task() fails, however, is when a child does not have an mm or has a /proc/pid/oom_adj of OOM_DISABLE. badness() returns 0 for both cases, so the final oom_kill_task() will always succeed. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:51 +07:00
* parent. This attempts to lose the minimal amount of work done while
* still freeing memory.
*/
read_lock(&tasklist_lock);
for_each_thread(p, t) {
oom: sacrifice child with highest badness score for parent When a task is chosen for oom kill, the oom killer first attempts to sacrifice a child not sharing its parent's memory instead. Unfortunately, this often kills in a seemingly random fashion based on the ordering of the selected task's child list. Additionally, it is not guaranteed at all to free a large amount of memory that we need to prevent additional oom killing in the very near future. Instead, we now only attempt to sacrifice the worst child not sharing its parent's memory, if one exists. The worst child is indicated with the highest badness() score. This serves two advantages: we kill a memory-hogging task more often, and we allow the configurable /proc/pid/oom_adj value to be considered as a factor in which child to kill. Reviewers may observe that the previous implementation would iterate through the children and attempt to kill each until one was successful and then the parent if none were found while the new code simply kills the most memory-hogging task or the parent. Note that the only time oom_kill_task() fails, however, is when a child does not have an mm or has a /proc/pid/oom_adj of OOM_DISABLE. badness() returns 0 for both cases, so the final oom_kill_task() will always succeed. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:51 +07:00
list_for_each_entry(child, &t->children, sibling) {
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
unsigned int child_points;
oom: sacrifice child with highest badness score for parent When a task is chosen for oom kill, the oom killer first attempts to sacrifice a child not sharing its parent's memory instead. Unfortunately, this often kills in a seemingly random fashion based on the ordering of the selected task's child list. Additionally, it is not guaranteed at all to free a large amount of memory that we need to prevent additional oom killing in the very near future. Instead, we now only attempt to sacrifice the worst child not sharing its parent's memory, if one exists. The worst child is indicated with the highest badness() score. This serves two advantages: we kill a memory-hogging task more often, and we allow the configurable /proc/pid/oom_adj value to be considered as a factor in which child to kill. Reviewers may observe that the previous implementation would iterate through the children and attempt to kill each until one was successful and then the parent if none were found while the new code simply kills the most memory-hogging task or the parent. Note that the only time oom_kill_task() fails, however, is when a child does not have an mm or has a /proc/pid/oom_adj of OOM_DISABLE. badness() returns 0 for both cases, so the final oom_kill_task() will always succeed. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:51 +07:00
if (process_shares_mm(child, p->mm))
oom: avoid deferring oom killer if exiting task is being traced The oom killer naturally defers killing anything if it finds an eligible task that is already exiting and has yet to detach its ->mm. This avoids unnecessarily killing tasks when one is already in the exit path and may free enough memory that the oom killer is no longer needed. This is detected by PF_EXITING since threads that have already detached its ->mm are no longer considered at all. The problem with always deferring when a thread is PF_EXITING, however, is that it may never actually exit when being traced, specifically if another task is tracing it with PTRACE_O_TRACEEXIT. The oom killer does not want to defer in this case since there is no guarantee that thread will ever exit without intervention. This patch will now only defer the oom killer when a thread is PF_EXITING and no ptracer has stopped its progress in the exit path. It also ensures that a child is sacrificed for the chosen parent only if it has a different ->mm as the comment implies: this ensures that the thread group leader is always targeted appropriately. Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: <stable@kernel.org> [2.6.38.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 06:30:12 +07:00
continue;
oom: badness heuristic rewrite This a complete rewrite of the oom killer's badness() heuristic which is used to determine which task to kill in oom conditions. The goal is to make it as simple and predictable as possible so the results are better understood and we end up killing the task which will lead to the most memory freeing while still respecting the fine-tuning from userspace. Instead of basing the heuristic on mm->total_vm for each task, the task's rss and swap space is used instead. This is a better indication of the amount of memory that will be freeable if the oom killed task is chosen and subsequently exits. This helps specifically in cases where KDE or GNOME is chosen for oom kill on desktop systems instead of a memory hogging task. The baseline for the heuristic is a proportion of memory that each task is currently using in memory plus swap compared to the amount of "allowable" memory. "Allowable," in this sense, means the system-wide resources for unconstrained oom conditions, the set of mempolicy nodes, the mems attached to current's cpuset, or a memory controller's limit. The proportion is given on a scale of 0 (never kill) to 1000 (always kill), roughly meaning that if a task has a badness() score of 500 that the task consumes approximately 50% of allowable memory resident in RAM or in swap space. The proportion is always relative to the amount of "allowable" memory and not the total amount of RAM systemwide so that mempolicies and cpusets may operate in isolation; they shall not need to know the true size of the machine on which they are running if they are bound to a specific set of nodes or mems, respectively. Root tasks are given 3% extra memory just like __vm_enough_memory() provides in LSMs. In the event of two tasks consuming similar amounts of memory, it is generally better to save root's task. Because of the change in the badness() heuristic's baseline, it is also necessary to introduce a new user interface to tune it. It's not possible to redefine the meaning of /proc/pid/oom_adj with a new scale since the ABI cannot be changed for backward compatability. Instead, a new tunable, /proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may be used to polarize the heuristic such that certain tasks are never considered for oom kill while others may always be considered. The value is added directly into the badness() score so a value of -500, for example, means to discount 50% of its memory consumption in comparison to other tasks either on the system, bound to the mempolicy, in the cpuset, or sharing the same memory controller. /proc/pid/oom_adj is changed so that its meaning is rescaled into the units used by /proc/pid/oom_score_adj, and vice versa. Changing one of these per-task tunables will rescale the value of the other to an equivalent meaning. Although /proc/pid/oom_adj was originally defined as a bitshift on the badness score, it now shares the same linear growth as /proc/pid/oom_score_adj but with different granularity. This is required so the ABI is not broken with userspace applications and allows oom_adj to be deprecated for future removal. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
/*
* oom_badness() returns 0 if the thread is unkillable
*/
child_points = oom_badness(child,
oc->memcg, oc->nodemask, oc->totalpages);
oom: sacrifice child with highest badness score for parent When a task is chosen for oom kill, the oom killer first attempts to sacrifice a child not sharing its parent's memory instead. Unfortunately, this often kills in a seemingly random fashion based on the ordering of the selected task's child list. Additionally, it is not guaranteed at all to free a large amount of memory that we need to prevent additional oom killing in the very near future. Instead, we now only attempt to sacrifice the worst child not sharing its parent's memory, if one exists. The worst child is indicated with the highest badness() score. This serves two advantages: we kill a memory-hogging task more often, and we allow the configurable /proc/pid/oom_adj value to be considered as a factor in which child to kill. Reviewers may observe that the previous implementation would iterate through the children and attempt to kill each until one was successful and then the parent if none were found while the new code simply kills the most memory-hogging task or the parent. Note that the only time oom_kill_task() fails, however, is when a child does not have an mm or has a /proc/pid/oom_adj of OOM_DISABLE. badness() returns 0 for both cases, so the final oom_kill_task() will always succeed. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:51 +07:00
if (child_points > victim_points) {
put_task_struct(victim);
oom: sacrifice child with highest badness score for parent When a task is chosen for oom kill, the oom killer first attempts to sacrifice a child not sharing its parent's memory instead. Unfortunately, this often kills in a seemingly random fashion based on the ordering of the selected task's child list. Additionally, it is not guaranteed at all to free a large amount of memory that we need to prevent additional oom killing in the very near future. Instead, we now only attempt to sacrifice the worst child not sharing its parent's memory, if one exists. The worst child is indicated with the highest badness() score. This serves two advantages: we kill a memory-hogging task more often, and we allow the configurable /proc/pid/oom_adj value to be considered as a factor in which child to kill. Reviewers may observe that the previous implementation would iterate through the children and attempt to kill each until one was successful and then the parent if none were found while the new code simply kills the most memory-hogging task or the parent. Note that the only time oom_kill_task() fails, however, is when a child does not have an mm or has a /proc/pid/oom_adj of OOM_DISABLE. badness() returns 0 for both cases, so the final oom_kill_task() will always succeed. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:51 +07:00
victim = child;
victim_points = child_points;
get_task_struct(victim);
oom: sacrifice child with highest badness score for parent When a task is chosen for oom kill, the oom killer first attempts to sacrifice a child not sharing its parent's memory instead. Unfortunately, this often kills in a seemingly random fashion based on the ordering of the selected task's child list. Additionally, it is not guaranteed at all to free a large amount of memory that we need to prevent additional oom killing in the very near future. Instead, we now only attempt to sacrifice the worst child not sharing its parent's memory, if one exists. The worst child is indicated with the highest badness() score. This serves two advantages: we kill a memory-hogging task more often, and we allow the configurable /proc/pid/oom_adj value to be considered as a factor in which child to kill. Reviewers may observe that the previous implementation would iterate through the children and attempt to kill each until one was successful and then the parent if none were found while the new code simply kills the most memory-hogging task or the parent. Note that the only time oom_kill_task() fails, however, is when a child does not have an mm or has a /proc/pid/oom_adj of OOM_DISABLE. badness() returns 0 for both cases, so the final oom_kill_task() will always succeed. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:51 +07:00
}
oom: introduce find_lock_task_mm() to fix !mm false positives Almost all ->mm == NULL checks in oom_kill.c are wrong. The current code assumes that the task without ->mm has already released its memory and ignores the process. However this is not necessarily true when this process is multithreaded, other live sub-threads can use this ->mm. - Remove the "if (!p->mm)" check in select_bad_process(), it is just wrong. - Add the new helper, find_lock_task_mm(), which finds the live thread which uses the memory and takes task_lock() to pin ->mm - change oom_badness() to use this helper instead of just checking ->mm != NULL. - As David pointed out, select_bad_process() must never choose the task without ->mm, but no matter what oom_badness() returns the task can be chosen if nothing else has been found yet. Change oom_badness() to return int, change it to return -1 if find_lock_task_mm() fails, and change select_bad_process() to check points >= 0. Note! This patch is not enough, we need more changes. - oom_badness() was fixed, but oom_kill_task() still ignores the task without ->mm - oom_forkbomb_penalty() should use find_lock_task_mm() too, and it also needs other changes to actually find the first first-descendant children This will be addressed later. [kosaki.motohiro@jp.fujitsu.com: use in badness(), __oom_kill_task()] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:45 +07:00
}
}
read_unlock(&tasklist_lock);
oom: introduce find_lock_task_mm() to fix !mm false positives Almost all ->mm == NULL checks in oom_kill.c are wrong. The current code assumes that the task without ->mm has already released its memory and ignores the process. However this is not necessarily true when this process is multithreaded, other live sub-threads can use this ->mm. - Remove the "if (!p->mm)" check in select_bad_process(), it is just wrong. - Add the new helper, find_lock_task_mm(), which finds the live thread which uses the memory and takes task_lock() to pin ->mm - change oom_badness() to use this helper instead of just checking ->mm != NULL. - As David pointed out, select_bad_process() must never choose the task without ->mm, but no matter what oom_badness() returns the task can be chosen if nothing else has been found yet. Change oom_badness() to return int, change it to return -1 if find_lock_task_mm() fails, and change select_bad_process() to check points >= 0. Note! This patch is not enough, we need more changes. - oom_badness() was fixed, but oom_kill_task() still ignores the task without ->mm - oom_forkbomb_penalty() should use find_lock_task_mm() too, and it also needs other changes to actually find the first first-descendant children This will be addressed later. [kosaki.motohiro@jp.fujitsu.com: use in badness(), __oom_kill_task()] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:45 +07:00
p = find_lock_task_mm(victim);
if (!p) {
put_task_struct(victim);
return;
} else if (victim != p) {
get_task_struct(p);
put_task_struct(victim);
victim = p;
}
/* Get a reference to safely compare mm after task_unlock(victim) */
mm = victim->mm;
mmgrab(mm);
mm/oom_kill.c: reverse the order of setting TIF_MEMDIE and sending SIGKILL It was confirmed that a local unprivileged user can consume all memory reserves and hang up that system using time lag between the OOM killer sets TIF_MEMDIE on an OOM victim and sends SIGKILL to that victim, for printk() inside for_each_process() loop at oom_kill_process() can consume many seconds when there are many thread groups sharing the same memory. Before starting oom-depleter process: Node 0 DMA: 3*4kB (UM) 6*8kB (U) 4*16kB (UEM) 0*32kB 0*64kB 1*128kB (M) 2*256kB (EM) 2*512kB (UE) 2*1024kB (EM) 1*2048kB (E) 1*4096kB (M) = 9980kB Node 0 DMA32: 31*4kB (UEM) 27*8kB (UE) 32*16kB (UE) 13*32kB (UE) 14*64kB (UM) 7*128kB (UM) 8*256kB (UM) 8*512kB (UM) 3*1024kB (U) 4*2048kB (UM) 362*4096kB (UM) = 1503220kB As of invoking the OOM killer: Node 0 DMA: 11*4kB (UE) 8*8kB (UEM) 6*16kB (UE) 2*32kB (EM) 0*64kB 1*128kB (U) 3*256kB (UEM) 2*512kB (UE) 3*1024kB (UEM) 1*2048kB (U) 0*4096kB = 7308kB Node 0 DMA32: 1049*4kB (UEM) 507*8kB (UE) 151*16kB (UE) 53*32kB (UEM) 83*64kB (UEM) 52*128kB (EM) 25*256kB (UEM) 11*512kB (M) 6*1024kB (UM) 1*2048kB (M) 0*4096kB = 44556kB Between the thread group leader got TIF_MEMDIE and receives SIGKILL: Node 0 DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB Node 0 DMA32: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB The oom-depleter's thread group leader which got TIF_MEMDIE started memset() in user space after the OOM killer set TIF_MEMDIE, and it was free to abuse ALLOC_NO_WATERMARKS by TIF_MEMDIE for memset() in user space until SIGKILL is delivered. If SIGKILL is delivered before TIF_MEMDIE is set, the oom-depleter can terminate without touching memory reserves. Although the possibility of hitting this time lag is very small for 3.19 and earlier kernels because TIF_MEMDIE is set immediately before sending SIGKILL, preemption or long interrupts (an extreme example is SysRq-t) can step between and allow memory allocations which are not needed for terminating the OOM victim. Fixes: 83363b917a29 ("oom: make sure that TIF_MEMDIE is set under task_lock") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 09:47:44 +07:00
/*
* We should send SIGKILL before setting TIF_MEMDIE in order to prevent
* the OOM victim from depleting the memory reserves from the user
* space under its control.
*/
do_send_sig_info(SIGKILL, SEND_SIG_FORCED, victim, true);
mark_oom_victim(victim);
pr_err("Killed process %d (%s) total-vm:%lukB, anon-rss:%lukB, file-rss:%lukB, shmem-rss:%lukB\n",
task_pid_nr(victim), victim->comm, K(victim->mm->total_vm),
K(get_mm_counter(victim->mm, MM_ANONPAGES)),
K(get_mm_counter(victim->mm, MM_FILEPAGES)),
K(get_mm_counter(victim->mm, MM_SHMEMPAGES)));
task_unlock(victim);
/*
* Kill all user processes sharing victim->mm in other thread groups, if
* any. They don't get access to memory reserves, though, to avoid
* depletion of all memory. This prevents mm->mmap_sem livelock when an
* oom killed thread cannot exit because it requires the semaphore and
* its contended by another thread trying to allocate memory itself.
* That thread will now get access to memory reserves since it has a
* pending fatal signal.
*/
rcu_read_lock();
for_each_process(p) {
if (!process_shares_mm(p, mm))
continue;
if (same_thread_group(p, victim))
continue;
if (is_global_init(p)) {
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
can_oom_reap = false;
set_bit(MMF_OOM_SKIP, &mm->flags);
pr_info("oom killer %d (%s) has mm pinned by %d (%s)\n",
task_pid_nr(victim), victim->comm,
task_pid_nr(p), p->comm);
continue;
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
}
/*
* No use_mm() user needs to read from the userspace so we are
* ok to reap it.
*/
if (unlikely(p->flags & PF_KTHREAD))
continue;
do_send_sig_info(SIGKILL, SEND_SIG_FORCED, p, true);
}
rcu_read_unlock();
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
if (can_oom_reap)
oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space When oom_reaper manages to unmap all the eligible vmas there shouldn't be much of the freable memory held by the oom victim left anymore so it makes sense to clear the TIF_MEMDIE flag for the victim and allow the OOM killer to select another task. The lack of TIF_MEMDIE also means that the victim cannot access memory reserves anymore but that shouldn't be a problem because it would get the access again if it needs to allocate and hits the OOM killer again due to the fatal_signal_pending resp. PF_EXITING check. We can safely hide the task from the OOM killer because it is clearly not a good candidate anymore as everyhing reclaimable has been torn down already. This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE and thus hold off further global OOM killer actions granted the oom reaper is able to take mmap_sem for the associated mm struct. This is not guaranteed now but further steps should make sure that mmap_sem for write should be blocked killable which will help to reduce such a lock contention. This is not done by this patch. Note that exit_oom_victim might be called on a remote task from __oom_reap_task now so we have to check and clear the flag atomically otherwise we might race and underflow oom_victims or wake up waiters too early. Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:27 +07:00
wake_oom_reaper(victim);
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 04:20:24 +07:00
mmdrop(mm);
put_task_struct(victim);
}
#undef K
/*
* Determines whether the kernel must panic because of the panic_on_oom sysctl.
*/
static void check_panic_on_oom(struct oom_control *oc,
enum oom_constraint constraint)
{
if (likely(!sysctl_panic_on_oom))
return;
if (sysctl_panic_on_oom != 2) {
/*
* panic_on_oom == 1 only affects CONSTRAINT_NONE, the kernel
* does not panic for cpuset, mempolicy, or memcg allocation
* failures.
*/
if (constraint != CONSTRAINT_NONE)
return;
}
/* Do not panic for oom kills triggered by sysrq */
if (is_sysrq_oom(oc))
return;
dump_header(oc, NULL);
panic("Out of memory: %s panic_on_oom is enabled\n",
sysctl_panic_on_oom == 2 ? "compulsory" : "system-wide");
}
static BLOCKING_NOTIFIER_HEAD(oom_notify_list);
int register_oom_notifier(struct notifier_block *nb)
{
return blocking_notifier_chain_register(&oom_notify_list, nb);
}
EXPORT_SYMBOL_GPL(register_oom_notifier);
int unregister_oom_notifier(struct notifier_block *nb)
{
return blocking_notifier_chain_unregister(&oom_notify_list, nb);
}
EXPORT_SYMBOL_GPL(unregister_oom_notifier);
/**
* out_of_memory - kill the "best" process when we run out of memory
* @oc: pointer to struct oom_control
*
* If we run out of memory, we have the choice between either
* killing a random task (bad), letting the system crash (worse)
* OR try to be smart about which process to kill. Note that we
* don't have to be perfect here, we just have to be good.
*/
bool out_of_memory(struct oom_control *oc)
{
unsigned long freed = 0;
enum oom_constraint constraint = CONSTRAINT_NONE;
if (oom_killer_disabled)
return false;
if (!is_memcg_oom(oc)) {
blocking_notifier_call_chain(&oom_notify_list, 0, &freed);
if (freed > 0)
/* Got some memory back in the last second. */
return true;
}
oom: give current access to memory reserves if it has been killed It's possible to livelock the page allocator if a thread has mm->mmap_sem and fails to make forward progress because the oom killer selects another thread sharing the same ->mm to kill that cannot exit until the semaphore is dropped. The oom killer will not kill multiple tasks at the same time; each oom killed task must exit before another task may be killed. Thus, if one thread is holding mm->mmap_sem and cannot allocate memory, all threads sharing the same ->mm are blocked from exiting as well. In the oom kill case, that means the thread holding mm->mmap_sem will never free additional memory since it cannot get access to memory reserves and the thread that depends on it with access to memory reserves cannot exit because it cannot acquire the semaphore. Thus, the page allocators livelocks. When the oom killer is called and current happens to have a pending SIGKILL, this patch automatically gives it access to memory reserves and returns. Upon returning to the page allocator, its allocation will hopefully succeed so it can quickly exit and free its memory. If not, the page allocator will fail the allocation if it is not __GFP_NOFAIL. Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:48 +07:00
/*
mm, oom: allow exiting threads to have access to memory reserves Exiting threads, those with PF_EXITING set, can pagefault and require memory before they can make forward progress. This happens, for instance, when a process must fault task->robust_list, a userspace structure, before detaching its memory. These threads also aren't guaranteed to get access to memory reserves unless oom killed or killed from userspace. The oom killer won't grant memory reserves if other threads are also exiting other than current and stalling at the same point. This prevents needlessly killing processes when others are already exiting. Instead of special casing all the possible situations between PF_EXITING getting set and a thread detaching its mm where it may allocate memory, which probably wouldn't get updated when a change is made to the exit path, the solution is to give all exiting threads access to memory reserves if they call the oom killer. This allows them to quickly allocate, detach its mm, and free the memory it represents. Summary of Luigi's bug report: : He had an oom condition where threads were faulting on task->robust_list : and repeatedly called the oom killer but it would defer killing a thread : because it saw other PF_EXITING threads. This can happen anytime we need : to allocate memory after setting PF_EXITING and before detaching our mm; : if there are other threads in the same state then the oom killer won't do : anything unless one of them happens to be killed from userspace. : : So instead of only deferring for PF_EXITING and !task->robust_list, it's : better to just give them access to memory reserves to prevent a potential : livelock so that any other faults that may be introduced in the future in : the exit path don't cause the same problem (and hopefully we don't allow : too many of those!). Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Tested-by: Luigi Semenzato <semenzato@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:01:30 +07:00
* If current has a pending SIGKILL or is exiting, then automatically
* select it. The goal is to allow it to allocate so that it may
* quickly exit and free its memory.
oom: give current access to memory reserves if it has been killed It's possible to livelock the page allocator if a thread has mm->mmap_sem and fails to make forward progress because the oom killer selects another thread sharing the same ->mm to kill that cannot exit until the semaphore is dropped. The oom killer will not kill multiple tasks at the same time; each oom killed task must exit before another task may be killed. Thus, if one thread is holding mm->mmap_sem and cannot allocate memory, all threads sharing the same ->mm are blocked from exiting as well. In the oom kill case, that means the thread holding mm->mmap_sem will never free additional memory since it cannot get access to memory reserves and the thread that depends on it with access to memory reserves cannot exit because it cannot acquire the semaphore. Thus, the page allocators livelocks. When the oom killer is called and current happens to have a pending SIGKILL, this patch automatically gives it access to memory reserves and returns. Upon returning to the page allocator, its allocation will hopefully succeed so it can quickly exit and free its memory. If not, the page allocator will fail the allocation if it is not __GFP_NOFAIL. Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:48 +07:00
*/
if (task_will_free_mem(current)) {
mark_oom_victim(current);
wake_oom_reaper(current);
return true;
oom: give current access to memory reserves if it has been killed It's possible to livelock the page allocator if a thread has mm->mmap_sem and fails to make forward progress because the oom killer selects another thread sharing the same ->mm to kill that cannot exit until the semaphore is dropped. The oom killer will not kill multiple tasks at the same time; each oom killed task must exit before another task may be killed. Thus, if one thread is holding mm->mmap_sem and cannot allocate memory, all threads sharing the same ->mm are blocked from exiting as well. In the oom kill case, that means the thread holding mm->mmap_sem will never free additional memory since it cannot get access to memory reserves and the thread that depends on it with access to memory reserves cannot exit because it cannot acquire the semaphore. Thus, the page allocators livelocks. When the oom killer is called and current happens to have a pending SIGKILL, this patch automatically gives it access to memory reserves and returns. Upon returning to the page allocator, its allocation will hopefully succeed so it can quickly exit and free its memory. If not, the page allocator will fail the allocation if it is not __GFP_NOFAIL. Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:18:48 +07:00
}
mm, oom: move GFP_NOFS check to out_of_memory __alloc_pages_may_oom is the central place to decide when the out_of_memory should be invoked. This is a good approach for most checks there because they are page allocator specific and the allocation fails right after for all of them. The notable exception is GFP_NOFS context which is faking did_some_progress and keep the page allocator looping even though there couldn't have been any progress from the OOM killer. This patch doesn't change this behavior because we are not ready to allow those allocation requests to fail yet (and maybe we will face the reality that we will never manage to safely fail these request). Instead __GFP_FS check is moved down to out_of_memory and prevent from OOM victim selection there. There are two reasons for that - OOM notifiers might release some memory even from this context as none of the registered notifier seems to be FS related - this might help a dying thread to get an access to memory reserves and move on which will make the behavior more consistent with the case when the task gets killed from a different context. Keep a comment in __alloc_pages_may_oom to make sure we do not forget how GFP_NOFS is special and that we really want to do something about it. Note to the current oom_notifier users: The observable difference for you is that oom notifiers cannot depend on any fs locks because we could deadlock. Not that this would be allowed today because that would just lockup machine in most of the cases and ruling out the OOM killer along the way. Another difference is that callbacks might be invoked sooner now because GFP_NOFS is a weaker reclaim context and so there could be reclaimable memory which is just not reachable now. That would require GFP_NOFS only loads which are really rare and more importantly the observable result would be dropping of reconstructible object and potential performance drop which is not such a big deal when we are struggling to fulfill other important allocation requests. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Raushaniya Maksudova <rmaksudova@parallels.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:13:09 +07:00
/*
* The OOM killer does not compensate for IO-less reclaim.
* pagefault_out_of_memory lost its gfp context so we have to
* make sure exclude 0 mask - all other users should have at least
* ___GFP_DIRECT_RECLAIM to get here.
*/
mm, oom: do not enforce OOM killer for __GFP_NOFAIL automatically __alloc_pages_may_oom makes sure to skip the OOM killer depending on the allocation request. This includes lowmem requests, costly high order requests and others. For a long time __GFP_NOFAIL acted as an override for all those rules. This is not documented and it can be quite surprising as well. E.g. GFP_NOFS requests are not invoking the OOM killer but GFP_NOFS|__GFP_NOFAIL does so if we try to convert some of the existing open coded loops around allocator to nofail request (and we have done that in the past) then such a change would have a non trivial side effect which is far from obvious. Note that the primary motivation for skipping the OOM killer is to prevent from pre-mature invocation. The exception has been added by commit 82553a937f12 ("oom: invoke oom killer for __GFP_NOFAIL"). The changelog points out that the oom killer has to be invoked otherwise the request would be looping for ever. But this argument is rather weak because the OOM killer doesn't really guarantee a forward progress for those exceptional cases: - it will hardly help to form costly order which in turn can result in the system panic because of no oom killable task in the end - I believe we certainly do not want to put the system down just because there is a nasty driver asking for order-9 page with GFP_NOFAIL not realizing all the consequences. It is much better this request would loop for ever than the massive system disruption - lowmem is also highly unlikely to be freed during OOM killer - GFP_NOFS request could trigger while there is still a lot of memory pinned by filesystems. This patch simply removes the __GFP_NOFAIL special case in order to have a more clear semantic without surprising side effects. Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Nils Holland <nholland@tisys.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 06:46:22 +07:00
if (oc->gfp_mask && !(oc->gfp_mask & __GFP_FS))
mm, oom: move GFP_NOFS check to out_of_memory __alloc_pages_may_oom is the central place to decide when the out_of_memory should be invoked. This is a good approach for most checks there because they are page allocator specific and the allocation fails right after for all of them. The notable exception is GFP_NOFS context which is faking did_some_progress and keep the page allocator looping even though there couldn't have been any progress from the OOM killer. This patch doesn't change this behavior because we are not ready to allow those allocation requests to fail yet (and maybe we will face the reality that we will never manage to safely fail these request). Instead __GFP_FS check is moved down to out_of_memory and prevent from OOM victim selection there. There are two reasons for that - OOM notifiers might release some memory even from this context as none of the registered notifier seems to be FS related - this might help a dying thread to get an access to memory reserves and move on which will make the behavior more consistent with the case when the task gets killed from a different context. Keep a comment in __alloc_pages_may_oom to make sure we do not forget how GFP_NOFS is special and that we really want to do something about it. Note to the current oom_notifier users: The observable difference for you is that oom notifiers cannot depend on any fs locks because we could deadlock. Not that this would be allowed today because that would just lockup machine in most of the cases and ruling out the OOM killer along the way. Another difference is that callbacks might be invoked sooner now because GFP_NOFS is a weaker reclaim context and so there could be reclaimable memory which is just not reachable now. That would require GFP_NOFS only loads which are really rare and more importantly the observable result would be dropping of reconstructible object and potential performance drop which is not such a big deal when we are struggling to fulfill other important allocation requests. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Raushaniya Maksudova <rmaksudova@parallels.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:13:09 +07:00
return true;
/*
* Check if there were limitations on the allocation (only relevant for
* NUMA and memcg) that may require different handling.
*/
constraint = constrained_alloc(oc);
if (constraint != CONSTRAINT_MEMORY_POLICY)
oc->nodemask = NULL;
check_panic_on_oom(oc, constraint);
if (!is_memcg_oom(oc) && sysctl_oom_kill_allocating_task &&
current->mm && !oom_unkillable_task(current, NULL, oc->nodemask) &&
current->signal->oom_score_adj != OOM_SCORE_ADJ_MIN) {
get_task_struct(current);
oc->chosen = current;
oom_kill_process(oc, "Out of memory (oom_kill_allocating_task)");
return true;
}
select_bad_process(oc);
/* Found nothing?!?! Either we hang forever, or we panic. */
if (!oc->chosen && !is_sysrq_oom(oc) && !is_memcg_oom(oc)) {
dump_header(oc, NULL);
panic("Out of memory and no killable processes...\n");
}
if (oc->chosen && oc->chosen != (void *)-1UL) {
oom_kill_process(oc, !is_memcg_oom(oc) ? "Out of memory" :
"Memory cgroup out of memory");
/*
* Give the killed process a good chance to exit before trying
* to allocate memory again.
*/
schedule_timeout_killable(1);
}
return !!oc->chosen;
oom, PM: make OOM detection in the freezer path raceless Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:24 +07:00
}
/*
* The pagefault handler calls here because it is out of memory, so kill a
* memory-hogging task. If oom_lock is held by somebody else, a parallel oom
* killing is already in progress so do nothing.
*/
void pagefault_out_of_memory(void)
{
struct oom_control oc = {
.zonelist = NULL,
.nodemask = NULL,
.memcg = NULL,
.gfp_mask = 0,
.order = 0,
};
if (mem_cgroup_oom_synchronize(true))
return;
mm: memcg: do not trap chargers with full callstack on OOM The memcg OOM handling is incredibly fragile and can deadlock. When a task fails to charge memory, it invokes the OOM killer and loops right there in the charge code until it succeeds. Comparably, any other task that enters the charge path at this point will go to a waitqueue right then and there and sleep until the OOM situation is resolved. The problem is that these tasks may hold filesystem locks and the mmap_sem; locks that the selected OOM victim may need to exit. For example, in one reported case, the task invoking the OOM killer was about to charge a page cache page during a write(), which holds the i_mutex. The OOM killer selected a task that was just entering truncate() and trying to acquire the i_mutex: OOM invoking task: mem_cgroup_handle_oom+0x241/0x3b0 mem_cgroup_cache_charge+0xbe/0xe0 add_to_page_cache_locked+0x4c/0x140 add_to_page_cache_lru+0x22/0x50 grab_cache_page_write_begin+0x8b/0xe0 ext3_write_begin+0x88/0x270 generic_file_buffered_write+0x116/0x290 __generic_file_aio_write+0x27c/0x480 generic_file_aio_write+0x76/0xf0 # takes ->i_mutex do_sync_write+0xea/0x130 vfs_write+0xf3/0x1f0 sys_write+0x51/0x90 system_call_fastpath+0x18/0x1d OOM kill victim: do_truncate+0x58/0xa0 # takes i_mutex do_last+0x250/0xa30 path_openat+0xd7/0x440 do_filp_open+0x49/0xa0 do_sys_open+0x106/0x240 sys_open+0x20/0x30 system_call_fastpath+0x18/0x1d The OOM handling task will retry the charge indefinitely while the OOM killed task is not releasing any resources. A similar scenario can happen when the kernel OOM killer for a memcg is disabled and a userspace task is in charge of resolving OOM situations. In this case, ALL tasks that enter the OOM path will be made to sleep on the OOM waitqueue and wait for userspace to free resources or increase the group's limit. But a userspace OOM handler is prone to deadlock itself on the locks held by the waiting tasks. For example one of the sleeping tasks may be stuck in a brk() call with the mmap_sem held for writing but the userspace handler, in order to pick an optimal victim, may need to read files from /proc/<pid>, which tries to acquire the same mmap_sem for reading and deadlocks. This patch changes the way tasks behave after detecting a memcg OOM and makes sure nobody loops or sleeps with locks held: 1. When OOMing in a user fault, invoke the OOM killer and restart the fault instead of looping on the charge attempt. This way, the OOM victim can not get stuck on locks the looping task may hold. 2. When OOMing in a user fault but somebody else is handling it (either the kernel OOM killer or a userspace handler), don't go to sleep in the charge context. Instead, remember the OOMing memcg in the task struct and then fully unwind the page fault stack with -ENOMEM. pagefault_out_of_memory() will then call back into the memcg code to check if the -ENOMEM came from the memcg, and then either put the task to sleep on the memcg's OOM waitqueue or just restart the fault. The OOM victim can no longer get stuck on any lock a sleeping task may hold. Debugged by Michal Hocko. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: azurIt <azurit@pobox.sk> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-13 05:13:44 +07:00
if (!mutex_trylock(&oom_lock))
return;
out_of_memory(&oc);
mutex_unlock(&oom_lock);
}