AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-26 03:30:54 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
1ba37c518f
linux_dsm_epyc7002/drivers/pci/pcie/Kconfig

61 lines
1.6 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#
# PCI Express Port Bus Configuration
#
config PCIEPORTBUS
bool "PCI Express support"
depends on PCI
help
This automatically enables PCI Express Port Bus support. Users can
choose Native Hot-Plug support, Advanced Error Reporting support,
Power Management Event support and Virtual Channel support to run
on PCI Express Ports (Root or Switch).
#
# Include service Kconfig here
#
config HOTPLUG_PCI_PCIE
tristate "PCI Express Hotplug driver"
depends on HOTPLUG_PCI && PCIEPORTBUS
help
Say Y here if you have a motherboard that supports PCI Express Native
Hotplug
To compile this driver as a module, choose M here: the
module will be called pciehp.
When in doubt, say N.
PCI-Express AER implemetation: AER core and aerdriver Patch 3 implements the core part of PCI-Express AER and aerdrv port service driver. When a root port service device is probed, the aerdrv will call request_irq to register irq handler for AER error interrupt. When a device sends an PCI-Express error message to the root port, the root port will trigger an interrupt, by either MSI or IO-APIC, then kernel would run the irq handler. The handler collects root error status register and schedules a work. The work will call the core part to process the error based on its type (Correctable/non-fatal/fatal). As for Correctable errors, the patch chooses to just clear the correctable error status register of the device. As for the non-fatal error, the patch follows generic PCI error handler rules to call the error callback functions of the endpoint's driver. If the device is a bridge, the patch chooses to broadcast the error to downstream devices. As for the fatal error, the patch resets the pci-express link and follows generic PCI error handler rules to call the error callback functions of the endpoint's driver. If the device is a bridge, the patch chooses to broadcast the error to downstream devices. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-31 14:21:33 +07:00
source "drivers/pci/pcie/aer/Kconfig"
PCI: add PCI Express ASPM support PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 08:46:41 +07:00
#
# PCI Express ASPM
#
config PCIEASPM
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21 05:44:16 +07:00
bool "PCI Express ASPM control" if EXPERT
PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable The CONFIG_PCIEASPM option is confusing and potentially dangerous. ASPM is a hardware mediated feature rather than one under direct OS control, and even if the config option is disabled the system firmware may have turned on ASPM on various bits of hardware. This can cause problems later - various hardware that claims to support ASPM does a poor job of it and may hang or cause other difficulties. The kernel is able to recognise this in many cases and disable the ASPM functionality, but only if CONFIG_PCIEASPM is enabled. Given that in its default configuration this option will either leave the hardware as it was originally or disable hardware functionality that may cause problems, it should by default y. The only reason to disable it ought to be to reduce code size, so make it dependent on CONFIG_EMBEDDED. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: lrodriguez@atheros.com Cc: maximlevitsky@gmail.com Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-23 04:03:03 +07:00
depends on PCI && PCIEPORTBUS
default y
PCI: add PCI Express ASPM support PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 08:46:41 +07:00
help
PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable The CONFIG_PCIEASPM option is confusing and potentially dangerous. ASPM is a hardware mediated feature rather than one under direct OS control, and even if the config option is disabled the system firmware may have turned on ASPM on various bits of hardware. This can cause problems later - various hardware that claims to support ASPM does a poor job of it and may hang or cause other difficulties. The kernel is able to recognise this in many cases and disable the ASPM functionality, but only if CONFIG_PCIEASPM is enabled. Given that in its default configuration this option will either leave the hardware as it was originally or disable hardware functionality that may cause problems, it should by default y. The only reason to disable it ought to be to reduce code size, so make it dependent on CONFIG_EMBEDDED. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: lrodriguez@atheros.com Cc: maximlevitsky@gmail.com Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-23 04:03:03 +07:00
This enables OS control over PCI Express ASPM (Active State
Power Management) and Clock Power Management. ASPM supports
state L0/L0s/L1.
PCI: add PCI Express ASPM support PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 08:46:41 +07:00
PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable The CONFIG_PCIEASPM option is confusing and potentially dangerous. ASPM is a hardware mediated feature rather than one under direct OS control, and even if the config option is disabled the system firmware may have turned on ASPM on various bits of hardware. This can cause problems later - various hardware that claims to support ASPM does a poor job of it and may hang or cause other difficulties. The kernel is able to recognise this in many cases and disable the ASPM functionality, but only if CONFIG_PCIEASPM is enabled. Given that in its default configuration this option will either leave the hardware as it was originally or disable hardware functionality that may cause problems, it should by default y. The only reason to disable it ought to be to reduce code size, so make it dependent on CONFIG_EMBEDDED. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: lrodriguez@atheros.com Cc: maximlevitsky@gmail.com Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-23 04:03:03 +07:00
ASPM is initially set up the the firmware. With this option enabled,
Linux can modify this state in order to disable ASPM on known-bad
hardware or configurations and enable it when known-safe.
ASPM can be disabled or enabled at runtime via
/sys/module/pcie_aspm/parameters/policy
When in doubt, say Y.
PCI: add PCI Express ASPM support PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 08:46:41 +07:00
config PCIEASPM_DEBUG
bool "Debug PCI Express ASPM"
depends on PCIEASPM
default n
help
This enables PCI Express ASPM debug support. It will add per-device
interface to control ASPM.
PCI PM: PCIe PME root port service driver PCIe native PME detection mechanism is based on interrupts generated by root ports or event collectors every time a PCIe device sends a PME message upstream. Once a PME message has been sent by an endpoint device and received by its root port (or event collector in the case of root complex integrated endpoints), the Requester ID from the message header is registered in the root port's Root Status register. At the same time, the PME Status bit of the Root Status register is set to indicate that there's a PME to handle. If PCIe PME interrupt is enabled for the root port, it generates an interrupt once the PME Status has been set. After receiving the interrupt, the kernel can identify the PCIe device that generated the PME using the Requester ID from the root port's Root Status register. [For details, see PCI Express Base Specification, Rev. 2.0.] Implement a driver for the PCIe PME root port service working in accordance with the above description. Based on a patch from Shaohua Li <shaohua.li@intel.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-18 05:39:08 +07:00
config PCIE_PME
def_bool y
depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI
Reference in New Issue Copy Permalink