linux_dsm_epyc7002/drivers/pci/setup-bus.c

2233 lines
59 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Support routines for initializing a PCI subsystem
*
* Extruded from code written by
* Dave Rusling (david.rusling@reo.mts.dec.com)
* David Mosberger (davidm@cs.arizona.edu)
* David Miller (davem@redhat.com)
*
* Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
* PCI-PCI bridges cleanup, sorted resource allocation.
* Feb 2002, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
* Converted to allocation in 3 passes, which gives
* tighter packing. Prefetchable range support.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/cache.h>
#include <linux/slab.h>
#include <linux/acpi.h>
PCI SR-IOV: correct broken resource alignment calculations An SR-IOV capable device includes an SR-IOV PCIe capability which describes the Virtual Function (VF) BAR requirements. A typical SR-IOV device can support multiple VFs whose BARs must be in a contiguous region, effectively an array of VF BARs. The BAR reports the size requirement for a single VF. We calculate the full range needed by simply multiplying the VF BAR size with the number of possible VFs and create a resource spanning the full range. This all seems sane enough except it artificially inflates the alignment requirement for the VF BAR. The VF BAR need only be aligned to the size of a single BAR not the contiguous range of VF BARs. This can cause us to fail to allocate resources for the BAR despite the fact that we actually have enough space. This patch adds a thin PCI specific layer over the generic resource_alignment() function which is aware of the special nature of VF BARs and does sorting and allocation based on the smaller alignment requirement. I recognize that while resource_alignment is generic, it's basically a PCI helper. An alternative to this patch is to add PCI VF BAR specific information to struct resource. I opted for the extra layer rather than adding such PCI specific information to struct resource. This does have the slight downside that we don't cache the BAR size and re-read for each alignment query (happens a small handful of times during boot for each VF BAR). Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Yu Zhao <yu.zhao@intel.com> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-29 03:00:06 +07:00
#include "pci.h"
unsigned int pci_flags;
struct pci_dev_resource {
struct list_head list;
struct resource *res;
struct pci_dev *dev;
resource_size_t start;
resource_size_t end;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
resource_size_t add_size;
resource_size_t min_align;
unsigned long flags;
};
static void free_list(struct list_head *head)
{
struct pci_dev_resource *dev_res, *tmp;
list_for_each_entry_safe(dev_res, tmp, head, list) {
list_del(&dev_res->list);
kfree(dev_res);
}
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
/**
* add_to_list() - Add a new resource tracker to the list
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
* @head: Head of the list
* @dev: Device to which the resource belongs
* @res: Resource to be tracked
* @add_size: Additional size to be optionally added to the resource
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*/
static int add_to_list(struct list_head *head, struct pci_dev *dev,
struct resource *res, resource_size_t add_size,
resource_size_t min_align)
{
struct pci_dev_resource *tmp;
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp)
return -ENOMEM;
tmp->res = res;
tmp->dev = dev;
tmp->start = res->start;
tmp->end = res->end;
tmp->flags = res->flags;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
tmp->add_size = add_size;
tmp->min_align = min_align;
list_add(&tmp->list, head);
return 0;
}
static void remove_from_list(struct list_head *head, struct resource *res)
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
{
struct pci_dev_resource *dev_res, *tmp;
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
list_for_each_entry_safe(dev_res, tmp, head, list) {
if (dev_res->res == res) {
list_del(&dev_res->list);
kfree(dev_res);
break;
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
}
}
}
static struct pci_dev_resource *res_to_dev_res(struct list_head *head,
struct resource *res)
{
struct pci_dev_resource *dev_res;
list_for_each_entry(dev_res, head, list) {
if (dev_res->res == res)
return dev_res;
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
}
return NULL;
}
static resource_size_t get_res_add_size(struct list_head *head,
struct resource *res)
{
struct pci_dev_resource *dev_res;
dev_res = res_to_dev_res(head, res);
return dev_res ? dev_res->add_size : 0;
}
static resource_size_t get_res_add_align(struct list_head *head,
struct resource *res)
{
struct pci_dev_resource *dev_res;
dev_res = res_to_dev_res(head, res);
return dev_res ? dev_res->min_align : 0;
}
/* Sort resources by alignment */
static void pdev_sort_resources(struct pci_dev *dev, struct list_head *head)
{
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r;
struct pci_dev_resource *dev_res, *tmp;
resource_size_t r_align;
struct list_head *n;
r = &dev->resource[i];
if (r->flags & IORESOURCE_PCI_FIXED)
continue;
if (!(r->flags) || r->parent)
continue;
r_align = pci_resource_alignment(dev, r);
if (!r_align) {
pci_warn(dev, "BAR %d: %pR has bogus alignment\n",
i, r);
continue;
}
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp)
panic("pdev_sort_resources(): kmalloc() failed!\n");
tmp->res = r;
tmp->dev = dev;
/* Fallback is smallest one or list is empty */
n = head;
list_for_each_entry(dev_res, head, list) {
resource_size_t align;
align = pci_resource_alignment(dev_res->dev,
dev_res->res);
if (r_align > align) {
n = &dev_res->list;
break;
}
}
/* Insert it just before n */
list_add_tail(&tmp->list, n);
}
}
static void __dev_sort_resources(struct pci_dev *dev, struct list_head *head)
{
u16 class = dev->class >> 8;
/* Don't touch classless devices or host bridges or IOAPICs */
if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST)
return;
/* Don't touch IOAPIC devices already enabled by firmware */
if (class == PCI_CLASS_SYSTEM_PIC) {
u16 command;
pci_read_config_word(dev, PCI_COMMAND, &command);
if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
return;
}
pdev_sort_resources(dev, head);
}
static inline void reset_resource(struct resource *res)
{
res->start = 0;
res->end = 0;
res->flags = 0;
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
/**
* reassign_resources_sorted() - Satisfy any additional resource requests
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*
* @realloc_head: Head of the list tracking requests requiring
* additional resources
* @head: Head of the list tracking requests with allocated
* resources
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*
* Walk through each element of the realloc_head and try to procure additional
* resources for the element, provided the element is in the head list.
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*/
static void reassign_resources_sorted(struct list_head *realloc_head,
struct list_head *head)
{
struct resource *res;
struct pci_dev_resource *add_res, *tmp;
struct pci_dev_resource *dev_res;
resource_size_t add_size, align;
int idx;
list_for_each_entry_safe(add_res, tmp, realloc_head, list) {
bool found_match = false;
res = add_res->res;
/* Skip resource that has been reset */
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
if (!res->flags)
goto out;
/* Skip this resource if not found in head list */
list_for_each_entry(dev_res, head, list) {
if (dev_res->res == res) {
found_match = true;
break;
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
}
if (!found_match) /* Just skip */
continue;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
idx = res - &add_res->dev->resource[0];
add_size = add_res->add_size;
align = add_res->min_align;
if (!resource_size(res)) {
res->start = align;
res->end = res->start + add_size - 1;
if (pci_assign_resource(add_res->dev, idx))
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
reset_resource(res);
} else {
res->flags |= add_res->flags &
(IORESOURCE_STARTALIGN|IORESOURCE_SIZEALIGN);
if (pci_reassign_resource(add_res->dev, idx,
add_size, align))
pci_info(add_res->dev, "failed to add %llx res[%d]=%pR\n",
(unsigned long long) add_size, idx,
res);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
}
out:
list_del(&add_res->list);
kfree(add_res);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
}
}
/**
* assign_requested_resources_sorted() - Satisfy resource requests
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*
* @head: Head of the list tracking requests for resources
* @fail_head: Head of the list tracking requests that could not be
* allocated
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*
* Satisfy resource requests of each element in the list. Add requests that
* could not be satisfied to the failed_list.
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*/
static void assign_requested_resources_sorted(struct list_head *head,
struct list_head *fail_head)
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
{
struct resource *res;
struct pci_dev_resource *dev_res;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
int idx;
list_for_each_entry(dev_res, head, list) {
res = dev_res->res;
idx = res - &dev_res->dev->resource[0];
if (resource_size(res) &&
pci_assign_resource(dev_res->dev, idx)) {
if (fail_head) {
/*
* If the failed resource is a ROM BAR and
* it will be enabled later, don't add it
* to the list.
*/
if (!((idx == PCI_ROM_RESOURCE) &&
(!(res->flags & IORESOURCE_ROM_ENABLE))))
add_to_list(fail_head,
dev_res->dev, res,
0 /* don't care */,
0 /* don't care */);
}
reset_resource(res);
}
}
}
static unsigned long pci_fail_res_type_mask(struct list_head *fail_head)
{
struct pci_dev_resource *fail_res;
unsigned long mask = 0;
/* Check failed type */
list_for_each_entry(fail_res, fail_head, list)
mask |= fail_res->flags;
/*
* One pref failed resource will set IORESOURCE_MEM, as we can
* allocate pref in non-pref range. Will release all assigned
* non-pref sibling resources according to that bit.
*/
return mask & (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH);
}
static bool pci_need_to_release(unsigned long mask, struct resource *res)
{
if (res->flags & IORESOURCE_IO)
return !!(mask & IORESOURCE_IO);
/* Check pref at first */
if (res->flags & IORESOURCE_PREFETCH) {
if (mask & IORESOURCE_PREFETCH)
return true;
/* Count pref if its parent is non-pref */
else if ((mask & IORESOURCE_MEM) &&
!(res->parent->flags & IORESOURCE_PREFETCH))
return true;
else
return false;
}
if (res->flags & IORESOURCE_MEM)
return !!(mask & IORESOURCE_MEM);
return false; /* Should not get here */
}
static void __assign_resources_sorted(struct list_head *head,
struct list_head *realloc_head,
struct list_head *fail_head)
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
{
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
/*
* Should not assign requested resources at first. They could be
* adjacent, so later reassign can not reallocate them one by one in
* parent resource window.
*
* Try to assign requested + add_size at beginning. If could do that,
* could get out early. If could not do that, we still try to assign
* requested at first, then try to reassign add_size for some resources.
*
* Separate three resource type checking if we need to release
* assigned resource after requested + add_size try.
*
* 1. If IO port assignment fails, will release assigned IO
* port.
* 2. If pref MMIO assignment fails, release assigned pref
* MMIO. If assigned pref MMIO's parent is non-pref MMIO
* and non-pref MMIO assignment fails, will release that
* assigned pref MMIO.
* 3. If non-pref MMIO assignment fails or pref MMIO
* assignment fails, will release assigned non-pref MMIO.
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
*/
LIST_HEAD(save_head);
LIST_HEAD(local_fail_head);
struct pci_dev_resource *save_res;
struct pci_dev_resource *dev_res, *tmp_res, *dev_res2;
unsigned long fail_type;
resource_size_t add_align, align;
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
/* Check if optional add_size is there */
if (!realloc_head || list_empty(realloc_head))
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
goto requested_and_reassign;
/* Save original start, end, flags etc at first */
list_for_each_entry(dev_res, head, list) {
if (add_to_list(&save_head, dev_res->dev, dev_res->res, 0, 0)) {
free_list(&save_head);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
goto requested_and_reassign;
}
}
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
/* Update res in head list with add_size in realloc_head list */
list_for_each_entry_safe(dev_res, tmp_res, head, list) {
dev_res->res->end += get_res_add_size(realloc_head,
dev_res->res);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
/*
* There are two kinds of additional resources in the list:
* 1. bridge resource -- IORESOURCE_STARTALIGN
* 2. SR-IOV resource -- IORESOURCE_SIZEALIGN
* Here just fix the additional alignment for bridge
*/
if (!(dev_res->res->flags & IORESOURCE_STARTALIGN))
continue;
add_align = get_res_add_align(realloc_head, dev_res->res);
/*
* The "head" list is sorted by alignment so resources with
* bigger alignment will be assigned first. After we
* change the alignment of a dev_res in "head" list, we
* need to reorder the list by alignment to make it
* consistent.
*/
if (add_align > dev_res->res->start) {
resource_size_t r_size = resource_size(dev_res->res);
dev_res->res->start = add_align;
dev_res->res->end = add_align + r_size - 1;
list_for_each_entry(dev_res2, head, list) {
align = pci_resource_alignment(dev_res2->dev,
dev_res2->res);
if (add_align > align) {
list_move_tail(&dev_res->list,
&dev_res2->list);
break;
}
}
}
}
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
/* Try updated head list with add_size added */
assign_requested_resources_sorted(head, &local_fail_head);
/* All assigned with add_size? */
if (list_empty(&local_fail_head)) {
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
/* Remove head list from realloc_head list */
list_for_each_entry(dev_res, head, list)
remove_from_list(realloc_head, dev_res->res);
free_list(&save_head);
free_list(head);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
return;
}
/* Check failed type */
fail_type = pci_fail_res_type_mask(&local_fail_head);
/* Remove not need to be released assigned res from head list etc */
list_for_each_entry_safe(dev_res, tmp_res, head, list)
if (dev_res->res->parent &&
!pci_need_to_release(fail_type, dev_res->res)) {
/* Remove it from realloc_head list */
remove_from_list(realloc_head, dev_res->res);
remove_from_list(&save_head, dev_res->res);
list_del(&dev_res->list);
kfree(dev_res);
}
free_list(&local_fail_head);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
/* Release assigned resource */
list_for_each_entry(dev_res, head, list)
if (dev_res->res->parent)
release_resource(dev_res->res);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
/* Restore start/end/flags from saved list */
list_for_each_entry(save_res, &save_head, list) {
struct resource *res = save_res->res;
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
res->start = save_res->start;
res->end = save_res->end;
res->flags = save_res->flags;
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
}
free_list(&save_head);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 17:08:20 +07:00
requested_and_reassign:
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
/* Satisfy the must-have resource requests */
assign_requested_resources_sorted(head, fail_head);
/* Try to satisfy any additional optional resource requests */
if (realloc_head)
reassign_resources_sorted(realloc_head, head);
free_list(head);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
}
static void pdev_assign_resources_sorted(struct pci_dev *dev,
struct list_head *add_head,
struct list_head *fail_head)
{
LIST_HEAD(head);
__dev_sort_resources(dev, &head);
__assign_resources_sorted(&head, add_head, fail_head);
}
static void pbus_assign_resources_sorted(const struct pci_bus *bus,
struct list_head *realloc_head,
struct list_head *fail_head)
{
struct pci_dev *dev;
LIST_HEAD(head);
list_for_each_entry(dev, &bus->devices, bus_list)
__dev_sort_resources(dev, &head);
__assign_resources_sorted(&head, realloc_head, fail_head);
}
void pci_setup_cardbus(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
struct resource *res;
struct pci_bus_region region;
pci_info(bridge, "CardBus bridge to %pR\n",
&bus->busn_res);
res = bus->resource[0];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_IO) {
/*
* The IO resource is allocated a range twice as large as it
* would normally need. This allows us to set both IO regs.
*/
pci_info(bridge, " bridge window %pR\n", res);
pci_write_config_dword(bridge, PCI_CB_IO_BASE_0,
region.start);
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_0,
region.end);
}
res = bus->resource[1];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_IO) {
pci_info(bridge, " bridge window %pR\n", res);
pci_write_config_dword(bridge, PCI_CB_IO_BASE_1,
region.start);
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_1,
region.end);
}
res = bus->resource[2];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_MEM) {
pci_info(bridge, " bridge window %pR\n", res);
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0,
region.start);
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_0,
region.end);
}
res = bus->resource[3];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_MEM) {
pci_info(bridge, " bridge window %pR\n", res);
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1,
region.start);
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_1,
region.end);
}
}
EXPORT_SYMBOL(pci_setup_cardbus);
/*
* Initialize bridges with base/limit values we have collected. PCI-to-PCI
* Bridge Architecture Specification rev. 1.1 (1998) requires that if there
* are no I/O ports or memory behind the bridge, the corresponding range
* must be turned off by writing base value greater than limit to the
* bridge's base/limit registers.
*
* Note: care must be taken when updating I/O base/limit registers of
* bridges which support 32-bit I/O. This update requires two config space
* writes, so it's quite possible that an I/O window of the bridge will
* have some undesirable address (e.g. 0) after the first write. Ditto
* 64-bit prefetchable MMIO.
*/
static void pci_setup_bridge_io(struct pci_dev *bridge)
{
struct resource *res;
struct pci_bus_region region;
unsigned long io_mask;
u8 io_base_lo, io_limit_lo;
u16 l;
u32 io_upper16;
io_mask = PCI_IO_RANGE_MASK;
if (bridge->io_window_1k)
io_mask = PCI_IO_1K_RANGE_MASK;
/* Set up the top and bottom of the PCI I/O segment for this bus */
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 0];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_IO) {
pci_read_config_word(bridge, PCI_IO_BASE, &l);
io_base_lo = (region.start >> 8) & io_mask;
io_limit_lo = (region.end >> 8) & io_mask;
l = ((u16) io_limit_lo << 8) | io_base_lo;
/* Set up upper 16 bits of I/O base/limit */
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
pci_info(bridge, " bridge window %pR\n", res);
} else {
/* Clear upper 16 bits of I/O base/limit */
io_upper16 = 0;
l = 0x00f0;
}
/* Temporarily disable the I/O range before updating PCI_IO_BASE */
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0x0000ffff);
/* Update lower 16 bits of I/O base/limit */
pci_write_config_word(bridge, PCI_IO_BASE, l);
/* Update upper 16 bits of I/O base/limit */
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
}
static void pci_setup_bridge_mmio(struct pci_dev *bridge)
{
struct resource *res;
struct pci_bus_region region;
u32 l;
/* Set up the top and bottom of the PCI Memory segment for this bus */
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 1];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_MEM) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
pci_info(bridge, " bridge window %pR\n", res);
} else {
l = 0x0000fff0;
}
pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
}
static void pci_setup_bridge_mmio_pref(struct pci_dev *bridge)
{
struct resource *res;
struct pci_bus_region region;
u32 l, bu, lu;
/*
* Clear out the upper 32 bits of PREF limit. If
* PCI_PREF_BASE_UPPER32 was non-zero, this temporarily disables
* PREF range, which is ok.
*/
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
/* Set up PREF base/limit */
bu = lu = 0;
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 2];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_PREFETCH) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
if (res->flags & IORESOURCE_MEM_64) {
bu = upper_32_bits(region.start);
lu = upper_32_bits(region.end);
}
pci_info(bridge, " bridge window %pR\n", res);
} else {
l = 0x0000fff0;
}
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
/* Set the upper 32 bits of PREF base & limit */
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
}
static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type)
{
struct pci_dev *bridge = bus->self;
pci_info(bridge, "PCI bridge to %pR\n",
&bus->busn_res);
if (type & IORESOURCE_IO)
pci_setup_bridge_io(bridge);
if (type & IORESOURCE_MEM)
pci_setup_bridge_mmio(bridge);
if (type & IORESOURCE_PREFETCH)
pci_setup_bridge_mmio_pref(bridge);
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
}
void __weak pcibios_setup_bridge(struct pci_bus *bus, unsigned long type)
{
}
void pci_setup_bridge(struct pci_bus *bus)
{
unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
pcibios_setup_bridge(bus, type);
__pci_setup_bridge(bus, type);
}
PCI: Add pci_claim_bridge_resource() to clip window if necessary Add pci_claim_bridge_resource() to claim a PCI-PCI bridge window. This is like regular pci_claim_resource(), except that if we fail to claim the window, we check to see if we can reduce the size of the window and try again. This is for scenarios like this: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref] The 00:01.0 window is illegal: it starts before the host bridge window, so we have to assume the [0xbdf00000-0xbfffffff] region is inaccessible. We can make it legal by clipping it to [mem 0xc0000000-0xddefffff 64bit pref]. Previously we discarded the 00:01.0 window and tried to reassign that part of the hierarchy from scratch. That is a problem because Linux doesn't always assign things optimally. For example, in this case, BIOS put the 01:00.0 device in a prefetchable window below 4GB, but after 5b28541552ef, Linux puts the prefetchable window above 4GB where the 32-bit 01:00.0 device can't use it. Clipping the 00:01.0 window is less intrusive than completely reassigning things and is sufficient to let us use most of the BIOS configuration. Of course, it's possible that devices below 00:01.0 will no longer fit. If that's the case, we'll have to reassign things. But that's a separate problem. [bhelgaas: changelog, split into separate patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491 Reported-by: Marek Kordik <kordikmarek@gmail.com> Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.16+
2015-01-16 05:21:49 +07:00
int pci_claim_bridge_resource(struct pci_dev *bridge, int i)
{
if (i < PCI_BRIDGE_RESOURCES || i > PCI_BRIDGE_RESOURCE_END)
return 0;
if (pci_claim_resource(bridge, i) == 0)
return 0; /* Claimed the window */
PCI: Add pci_claim_bridge_resource() to clip window if necessary Add pci_claim_bridge_resource() to claim a PCI-PCI bridge window. This is like regular pci_claim_resource(), except that if we fail to claim the window, we check to see if we can reduce the size of the window and try again. This is for scenarios like this: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref] The 00:01.0 window is illegal: it starts before the host bridge window, so we have to assume the [0xbdf00000-0xbfffffff] region is inaccessible. We can make it legal by clipping it to [mem 0xc0000000-0xddefffff 64bit pref]. Previously we discarded the 00:01.0 window and tried to reassign that part of the hierarchy from scratch. That is a problem because Linux doesn't always assign things optimally. For example, in this case, BIOS put the 01:00.0 device in a prefetchable window below 4GB, but after 5b28541552ef, Linux puts the prefetchable window above 4GB where the 32-bit 01:00.0 device can't use it. Clipping the 00:01.0 window is less intrusive than completely reassigning things and is sufficient to let us use most of the BIOS configuration. Of course, it's possible that devices below 00:01.0 will no longer fit. If that's the case, we'll have to reassign things. But that's a separate problem. [bhelgaas: changelog, split into separate patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491 Reported-by: Marek Kordik <kordikmarek@gmail.com> Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.16+
2015-01-16 05:21:49 +07:00
if ((bridge->class >> 8) != PCI_CLASS_BRIDGE_PCI)
return 0;
if (!pci_bus_clip_resource(bridge, i))
return -EINVAL; /* Clipping didn't change anything */
PCI: Add pci_claim_bridge_resource() to clip window if necessary Add pci_claim_bridge_resource() to claim a PCI-PCI bridge window. This is like regular pci_claim_resource(), except that if we fail to claim the window, we check to see if we can reduce the size of the window and try again. This is for scenarios like this: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref] The 00:01.0 window is illegal: it starts before the host bridge window, so we have to assume the [0xbdf00000-0xbfffffff] region is inaccessible. We can make it legal by clipping it to [mem 0xc0000000-0xddefffff 64bit pref]. Previously we discarded the 00:01.0 window and tried to reassign that part of the hierarchy from scratch. That is a problem because Linux doesn't always assign things optimally. For example, in this case, BIOS put the 01:00.0 device in a prefetchable window below 4GB, but after 5b28541552ef, Linux puts the prefetchable window above 4GB where the 32-bit 01:00.0 device can't use it. Clipping the 00:01.0 window is less intrusive than completely reassigning things and is sufficient to let us use most of the BIOS configuration. Of course, it's possible that devices below 00:01.0 will no longer fit. If that's the case, we'll have to reassign things. But that's a separate problem. [bhelgaas: changelog, split into separate patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491 Reported-by: Marek Kordik <kordikmarek@gmail.com> Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.16+
2015-01-16 05:21:49 +07:00
switch (i - PCI_BRIDGE_RESOURCES) {
case 0:
pci_setup_bridge_io(bridge);
break;
case 1:
pci_setup_bridge_mmio(bridge);
break;
case 2:
pci_setup_bridge_mmio_pref(bridge);
break;
default:
return -EINVAL;
}
if (pci_claim_resource(bridge, i) == 0)
return 0; /* Claimed a smaller window */
PCI: Add pci_claim_bridge_resource() to clip window if necessary Add pci_claim_bridge_resource() to claim a PCI-PCI bridge window. This is like regular pci_claim_resource(), except that if we fail to claim the window, we check to see if we can reduce the size of the window and try again. This is for scenarios like this: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref] The 00:01.0 window is illegal: it starts before the host bridge window, so we have to assume the [0xbdf00000-0xbfffffff] region is inaccessible. We can make it legal by clipping it to [mem 0xc0000000-0xddefffff 64bit pref]. Previously we discarded the 00:01.0 window and tried to reassign that part of the hierarchy from scratch. That is a problem because Linux doesn't always assign things optimally. For example, in this case, BIOS put the 01:00.0 device in a prefetchable window below 4GB, but after 5b28541552ef, Linux puts the prefetchable window above 4GB where the 32-bit 01:00.0 device can't use it. Clipping the 00:01.0 window is less intrusive than completely reassigning things and is sufficient to let us use most of the BIOS configuration. Of course, it's possible that devices below 00:01.0 will no longer fit. If that's the case, we'll have to reassign things. But that's a separate problem. [bhelgaas: changelog, split into separate patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491 Reported-by: Marek Kordik <kordikmarek@gmail.com> Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.16+
2015-01-16 05:21:49 +07:00
return -EINVAL;
}
/*
* Check whether the bridge supports optional I/O and prefetchable memory
* ranges. If not, the respective base/limit registers must be read-only
* and read as 0.
*/
pci: do not mark exported functions as __devinit Functions marked __devinit will be removed after kernel init. But being exported they are potentially called by a module much later. So the safer choice seems to be to keep the function even in the non CONFIG_HOTPLUG case. This silence the follwoing section mismatch warnings: WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_device from __ksymtab_gpl between '__ksymtab_pci_bus_add_device' (at offset 0x20) and '__ksymtab_pci_walk_bus' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_create_bus from __ksymtab_gpl between '__ksymtab_pci_create_bus' (at offset 0x40) and '__ksymtab_pci_stop_bus_device' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_max_busnr from __ksymtab_gpl between '__ksymtab_pci_bus_max_busnr' (at offset 0xc0) and '__ksymtab_pci_assign_resource_fixed' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_claim_resource from __ksymtab_gpl between '__ksymtab_pci_claim_resource' (at offset 0xe0) and '__ksymtab_pcie_port_bus_type' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_devices from __ksymtab between '__ksymtab_pci_bus_add_devices' (at offset 0x70) and '__ksymtab_pci_bus_alloc_resource' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_scan_bus_parented from __ksymtab between '__ksymtab_pci_scan_bus_parented' (at offset 0x90) and '__ksymtab_pci_root_buses' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_assign_resources from __ksymtab between '__ksymtab_pci_bus_assign_resources' (at offset 0x4d0) and '__ksymtab_pci_bus_size_bridges' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_size_bridges from __ksymtab between '__ksymtab_pci_bus_size_bridges' (at offset 0x4e0) and '__ksymtab_pci_setup_cardbus' Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-27 12:53:30 +07:00
static void pci_bridge_check_ranges(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
PCI: Probe bridge window attributes once at enumeration-time pci_bridge_check_ranges() determines whether a bridge supports the optional I/O and prefetchable memory windows and sets the flag bits in the bridge resources. This *could* be done once during enumeration except that the resource allocation code completely clears the flag bits, e.g., in the pci_assign_unassigned_bridge_resources() path. The problem with pci_bridge_check_ranges() in the resource allocation path is that we may allocate resources after devices have been claimed by drivers, and pci_bridge_check_ranges() *changes* the window registers to determine whether they're writable. This may break concurrent accesses to devices behind the bridge. Add a new pci_read_bridge_windows() to determine whether a bridge supports the optional windows, call it once during enumeration, remember the results, and change pci_bridge_check_ranges() so it doesn't touch the bridge windows but sets the flag bits based on those remembered results. Link: https://lore.kernel.org/linux-pci/1506151482-113560-1-git-send-email-wangzhou1@hisilicon.com Link: https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg02082.html Reported-by: Yandong Xu <xuyandong2@huawei.com> Tested-by: Yandong Xu <xuyandong2@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Ofer Hayut <ofer@lightbitslabs.com> Cc: Roy Shterman <roys@lightbitslabs.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Zhou Wang <wangzhou1@hisilicon.com>
2019-01-20 00:35:04 +07:00
struct resource *b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
b_res[1].flags |= IORESOURCE_MEM;
PCI: Probe bridge window attributes once at enumeration-time pci_bridge_check_ranges() determines whether a bridge supports the optional I/O and prefetchable memory windows and sets the flag bits in the bridge resources. This *could* be done once during enumeration except that the resource allocation code completely clears the flag bits, e.g., in the pci_assign_unassigned_bridge_resources() path. The problem with pci_bridge_check_ranges() in the resource allocation path is that we may allocate resources after devices have been claimed by drivers, and pci_bridge_check_ranges() *changes* the window registers to determine whether they're writable. This may break concurrent accesses to devices behind the bridge. Add a new pci_read_bridge_windows() to determine whether a bridge supports the optional windows, call it once during enumeration, remember the results, and change pci_bridge_check_ranges() so it doesn't touch the bridge windows but sets the flag bits based on those remembered results. Link: https://lore.kernel.org/linux-pci/1506151482-113560-1-git-send-email-wangzhou1@hisilicon.com Link: https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg02082.html Reported-by: Yandong Xu <xuyandong2@huawei.com> Tested-by: Yandong Xu <xuyandong2@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Ofer Hayut <ofer@lightbitslabs.com> Cc: Roy Shterman <roys@lightbitslabs.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Zhou Wang <wangzhou1@hisilicon.com>
2019-01-20 00:35:04 +07:00
if (bridge->io_window)
b_res[0].flags |= IORESOURCE_IO;
PCI: Probe bridge window attributes once at enumeration-time pci_bridge_check_ranges() determines whether a bridge supports the optional I/O and prefetchable memory windows and sets the flag bits in the bridge resources. This *could* be done once during enumeration except that the resource allocation code completely clears the flag bits, e.g., in the pci_assign_unassigned_bridge_resources() path. The problem with pci_bridge_check_ranges() in the resource allocation path is that we may allocate resources after devices have been claimed by drivers, and pci_bridge_check_ranges() *changes* the window registers to determine whether they're writable. This may break concurrent accesses to devices behind the bridge. Add a new pci_read_bridge_windows() to determine whether a bridge supports the optional windows, call it once during enumeration, remember the results, and change pci_bridge_check_ranges() so it doesn't touch the bridge windows but sets the flag bits based on those remembered results. Link: https://lore.kernel.org/linux-pci/1506151482-113560-1-git-send-email-wangzhou1@hisilicon.com Link: https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg02082.html Reported-by: Yandong Xu <xuyandong2@huawei.com> Tested-by: Yandong Xu <xuyandong2@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Ofer Hayut <ofer@lightbitslabs.com> Cc: Roy Shterman <roys@lightbitslabs.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Zhou Wang <wangzhou1@hisilicon.com>
2019-01-20 00:35:04 +07:00
if (bridge->pref_window) {
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
PCI: Probe bridge window attributes once at enumeration-time pci_bridge_check_ranges() determines whether a bridge supports the optional I/O and prefetchable memory windows and sets the flag bits in the bridge resources. This *could* be done once during enumeration except that the resource allocation code completely clears the flag bits, e.g., in the pci_assign_unassigned_bridge_resources() path. The problem with pci_bridge_check_ranges() in the resource allocation path is that we may allocate resources after devices have been claimed by drivers, and pci_bridge_check_ranges() *changes* the window registers to determine whether they're writable. This may break concurrent accesses to devices behind the bridge. Add a new pci_read_bridge_windows() to determine whether a bridge supports the optional windows, call it once during enumeration, remember the results, and change pci_bridge_check_ranges() so it doesn't touch the bridge windows but sets the flag bits based on those remembered results. Link: https://lore.kernel.org/linux-pci/1506151482-113560-1-git-send-email-wangzhou1@hisilicon.com Link: https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg02082.html Reported-by: Yandong Xu <xuyandong2@huawei.com> Tested-by: Yandong Xu <xuyandong2@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Ofer Hayut <ofer@lightbitslabs.com> Cc: Roy Shterman <roys@lightbitslabs.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Zhou Wang <wangzhou1@hisilicon.com>
2019-01-20 00:35:04 +07:00
if (bridge->pref_64_window) {
b_res[2].flags |= IORESOURCE_MEM_64;
b_res[2].flags |= PCI_PREF_RANGE_TYPE_64;
}
}
}
/*
PCI: Avoid double hpmemsize MMIO window assignment Previously, the kernel sometimes assigned more MMIO or MMIO_PREF space than desired. For example, if the user requested 128M of space with "pci=realloc,hpmemsize=128M", we sometimes assigned 256M: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0xa00fffff] = 256M pci 0000:06:04.0: BAR 14: assigned [mem 0xa0200000-0xb01fffff] = 256M With this patch applied: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0x980fffff] = 128M pci 0000:06:04.0: BAR 14: assigned [mem 0x98200000-0xa01fffff] = 128M This happened when in the first pass, the MMIO_PREF succeeded but the MMIO failed. In the next pass, because MMIO_PREF was already assigned, the attempt to assign MMIO_PREF returned an error code instead of success (nothing more to do, already allocated). Hence, the size which was actually allocated, but thought to have failed, was placed in the MMIO window. The bug resulted in the MMIO_PREF being added to the MMIO window, which meant doubling if MMIO_PREF size = MMIO size. With a large MMIO_PREF, the MMIO window would likely fail to be assigned altogether due to lack of 32-bit address space. Change find_free_bus_resource() to do the following: - Return first unassigned resource of the correct type. - If there is none, return first assigned resource of the correct type. - If none of the above, return NULL. Returning an assigned resource of the correct type allows the caller to distinguish between already assigned and no resource of the correct type. Add checks in pbus_size_io() and pbus_size_mem() to return success if resource returned from find_free_bus_resource() is already allocated. This avoids pbus_size_io() and pbus_size_mem() returning error code to __pci_bus_size_bridges() when a resource has been successfully assigned in a previous pass. This fixes the existing behaviour where space for a resource could be reserved multiple times in different parent bridge windows. Link: https://lore.kernel.org/lkml/20190531171216.20532-2-logang@deltatee.com/T/#u Link: https://bugzilla.kernel.org/show_bug.cgi?id=203243 Link: https://lore.kernel.org/r/PS2P216MB075563AA6AD242AA666EDC6A80760@PS2P216MB0755.KORP216.PROD.OUTLOOK.COM Reported-by: Kit Chow <kchow@gigaio.com> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-11-13 22:25:28 +07:00
* Helper function for sizing routines. Assigned resources have non-NULL
* parent resource.
*
* Return first unassigned resource of the correct type. If there is none,
* return first assigned resource of the correct type. If none of the
* above, return NULL.
*
* Returning an assigned resource of the correct type allows the caller to
* distinguish between already assigned and no resource of the correct type.
*/
PCI: Avoid double hpmemsize MMIO window assignment Previously, the kernel sometimes assigned more MMIO or MMIO_PREF space than desired. For example, if the user requested 128M of space with "pci=realloc,hpmemsize=128M", we sometimes assigned 256M: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0xa00fffff] = 256M pci 0000:06:04.0: BAR 14: assigned [mem 0xa0200000-0xb01fffff] = 256M With this patch applied: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0x980fffff] = 128M pci 0000:06:04.0: BAR 14: assigned [mem 0x98200000-0xa01fffff] = 128M This happened when in the first pass, the MMIO_PREF succeeded but the MMIO failed. In the next pass, because MMIO_PREF was already assigned, the attempt to assign MMIO_PREF returned an error code instead of success (nothing more to do, already allocated). Hence, the size which was actually allocated, but thought to have failed, was placed in the MMIO window. The bug resulted in the MMIO_PREF being added to the MMIO window, which meant doubling if MMIO_PREF size = MMIO size. With a large MMIO_PREF, the MMIO window would likely fail to be assigned altogether due to lack of 32-bit address space. Change find_free_bus_resource() to do the following: - Return first unassigned resource of the correct type. - If there is none, return first assigned resource of the correct type. - If none of the above, return NULL. Returning an assigned resource of the correct type allows the caller to distinguish between already assigned and no resource of the correct type. Add checks in pbus_size_io() and pbus_size_mem() to return success if resource returned from find_free_bus_resource() is already allocated. This avoids pbus_size_io() and pbus_size_mem() returning error code to __pci_bus_size_bridges() when a resource has been successfully assigned in a previous pass. This fixes the existing behaviour where space for a resource could be reserved multiple times in different parent bridge windows. Link: https://lore.kernel.org/lkml/20190531171216.20532-2-logang@deltatee.com/T/#u Link: https://bugzilla.kernel.org/show_bug.cgi?id=203243 Link: https://lore.kernel.org/r/PS2P216MB075563AA6AD242AA666EDC6A80760@PS2P216MB0755.KORP216.PROD.OUTLOOK.COM Reported-by: Kit Chow <kchow@gigaio.com> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-11-13 22:25:28 +07:00
static struct resource *find_bus_resource_of_type(struct pci_bus *bus,
unsigned long type_mask,
unsigned long type)
{
PCI: Avoid double hpmemsize MMIO window assignment Previously, the kernel sometimes assigned more MMIO or MMIO_PREF space than desired. For example, if the user requested 128M of space with "pci=realloc,hpmemsize=128M", we sometimes assigned 256M: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0xa00fffff] = 256M pci 0000:06:04.0: BAR 14: assigned [mem 0xa0200000-0xb01fffff] = 256M With this patch applied: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0x980fffff] = 128M pci 0000:06:04.0: BAR 14: assigned [mem 0x98200000-0xa01fffff] = 128M This happened when in the first pass, the MMIO_PREF succeeded but the MMIO failed. In the next pass, because MMIO_PREF was already assigned, the attempt to assign MMIO_PREF returned an error code instead of success (nothing more to do, already allocated). Hence, the size which was actually allocated, but thought to have failed, was placed in the MMIO window. The bug resulted in the MMIO_PREF being added to the MMIO window, which meant doubling if MMIO_PREF size = MMIO size. With a large MMIO_PREF, the MMIO window would likely fail to be assigned altogether due to lack of 32-bit address space. Change find_free_bus_resource() to do the following: - Return first unassigned resource of the correct type. - If there is none, return first assigned resource of the correct type. - If none of the above, return NULL. Returning an assigned resource of the correct type allows the caller to distinguish between already assigned and no resource of the correct type. Add checks in pbus_size_io() and pbus_size_mem() to return success if resource returned from find_free_bus_resource() is already allocated. This avoids pbus_size_io() and pbus_size_mem() returning error code to __pci_bus_size_bridges() when a resource has been successfully assigned in a previous pass. This fixes the existing behaviour where space for a resource could be reserved multiple times in different parent bridge windows. Link: https://lore.kernel.org/lkml/20190531171216.20532-2-logang@deltatee.com/T/#u Link: https://bugzilla.kernel.org/show_bug.cgi?id=203243 Link: https://lore.kernel.org/r/PS2P216MB075563AA6AD242AA666EDC6A80760@PS2P216MB0755.KORP216.PROD.OUTLOOK.COM Reported-by: Kit Chow <kchow@gigaio.com> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-11-13 22:25:28 +07:00
struct resource *r, *r_assigned = NULL;
int i;
pci_bus_for_each_resource(bus, r, i) {
if (r == &ioport_resource || r == &iomem_resource)
continue;
if (r && (r->flags & type_mask) == type && !r->parent)
return r;
PCI: Avoid double hpmemsize MMIO window assignment Previously, the kernel sometimes assigned more MMIO or MMIO_PREF space than desired. For example, if the user requested 128M of space with "pci=realloc,hpmemsize=128M", we sometimes assigned 256M: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0xa00fffff] = 256M pci 0000:06:04.0: BAR 14: assigned [mem 0xa0200000-0xb01fffff] = 256M With this patch applied: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0x980fffff] = 128M pci 0000:06:04.0: BAR 14: assigned [mem 0x98200000-0xa01fffff] = 128M This happened when in the first pass, the MMIO_PREF succeeded but the MMIO failed. In the next pass, because MMIO_PREF was already assigned, the attempt to assign MMIO_PREF returned an error code instead of success (nothing more to do, already allocated). Hence, the size which was actually allocated, but thought to have failed, was placed in the MMIO window. The bug resulted in the MMIO_PREF being added to the MMIO window, which meant doubling if MMIO_PREF size = MMIO size. With a large MMIO_PREF, the MMIO window would likely fail to be assigned altogether due to lack of 32-bit address space. Change find_free_bus_resource() to do the following: - Return first unassigned resource of the correct type. - If there is none, return first assigned resource of the correct type. - If none of the above, return NULL. Returning an assigned resource of the correct type allows the caller to distinguish between already assigned and no resource of the correct type. Add checks in pbus_size_io() and pbus_size_mem() to return success if resource returned from find_free_bus_resource() is already allocated. This avoids pbus_size_io() and pbus_size_mem() returning error code to __pci_bus_size_bridges() when a resource has been successfully assigned in a previous pass. This fixes the existing behaviour where space for a resource could be reserved multiple times in different parent bridge windows. Link: https://lore.kernel.org/lkml/20190531171216.20532-2-logang@deltatee.com/T/#u Link: https://bugzilla.kernel.org/show_bug.cgi?id=203243 Link: https://lore.kernel.org/r/PS2P216MB075563AA6AD242AA666EDC6A80760@PS2P216MB0755.KORP216.PROD.OUTLOOK.COM Reported-by: Kit Chow <kchow@gigaio.com> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-11-13 22:25:28 +07:00
if (r && (r->flags & type_mask) == type && !r_assigned)
r_assigned = r;
}
PCI: Avoid double hpmemsize MMIO window assignment Previously, the kernel sometimes assigned more MMIO or MMIO_PREF space than desired. For example, if the user requested 128M of space with "pci=realloc,hpmemsize=128M", we sometimes assigned 256M: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0xa00fffff] = 256M pci 0000:06:04.0: BAR 14: assigned [mem 0xa0200000-0xb01fffff] = 256M With this patch applied: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0x980fffff] = 128M pci 0000:06:04.0: BAR 14: assigned [mem 0x98200000-0xa01fffff] = 128M This happened when in the first pass, the MMIO_PREF succeeded but the MMIO failed. In the next pass, because MMIO_PREF was already assigned, the attempt to assign MMIO_PREF returned an error code instead of success (nothing more to do, already allocated). Hence, the size which was actually allocated, but thought to have failed, was placed in the MMIO window. The bug resulted in the MMIO_PREF being added to the MMIO window, which meant doubling if MMIO_PREF size = MMIO size. With a large MMIO_PREF, the MMIO window would likely fail to be assigned altogether due to lack of 32-bit address space. Change find_free_bus_resource() to do the following: - Return first unassigned resource of the correct type. - If there is none, return first assigned resource of the correct type. - If none of the above, return NULL. Returning an assigned resource of the correct type allows the caller to distinguish between already assigned and no resource of the correct type. Add checks in pbus_size_io() and pbus_size_mem() to return success if resource returned from find_free_bus_resource() is already allocated. This avoids pbus_size_io() and pbus_size_mem() returning error code to __pci_bus_size_bridges() when a resource has been successfully assigned in a previous pass. This fixes the existing behaviour where space for a resource could be reserved multiple times in different parent bridge windows. Link: https://lore.kernel.org/lkml/20190531171216.20532-2-logang@deltatee.com/T/#u Link: https://bugzilla.kernel.org/show_bug.cgi?id=203243 Link: https://lore.kernel.org/r/PS2P216MB075563AA6AD242AA666EDC6A80760@PS2P216MB0755.KORP216.PROD.OUTLOOK.COM Reported-by: Kit Chow <kchow@gigaio.com> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-11-13 22:25:28 +07:00
return r_assigned;
}
static resource_size_t calculate_iosize(resource_size_t size,
resource_size_t min_size,
resource_size_t size1,
resource_size_t add_size,
resource_size_t children_add_size,
resource_size_t old_size,
resource_size_t align)
{
if (size < min_size)
size = min_size;
if (old_size == 1)
old_size = 0;
/*
* To be fixed in 2.5: we should have sort of HAVE_ISA flag in the
* struct pci_bus.
*/
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
size = (size & 0xff) + ((size & ~0xffUL) << 2);
#endif
size = size + size1;
if (size < old_size)
size = old_size;
size = ALIGN(max(size, add_size) + children_add_size, align);
return size;
}
static resource_size_t calculate_memsize(resource_size_t size,
resource_size_t min_size,
resource_size_t add_size,
resource_size_t children_add_size,
resource_size_t old_size,
resource_size_t align)
{
if (size < min_size)
size = min_size;
if (old_size == 1)
old_size = 0;
if (size < old_size)
size = old_size;
size = ALIGN(max(size, add_size) + children_add_size, align);
return size;
}
resource_size_t __weak pcibios_window_alignment(struct pci_bus *bus,
unsigned long type)
{
return 1;
}
#define PCI_P2P_DEFAULT_MEM_ALIGN 0x100000 /* 1MiB */
#define PCI_P2P_DEFAULT_IO_ALIGN 0x1000 /* 4KiB */
#define PCI_P2P_DEFAULT_IO_ALIGN_1K 0x400 /* 1KiB */
static resource_size_t window_alignment(struct pci_bus *bus, unsigned long type)
{
resource_size_t align = 1, arch_align;
if (type & IORESOURCE_MEM)
align = PCI_P2P_DEFAULT_MEM_ALIGN;
else if (type & IORESOURCE_IO) {
/*
* Per spec, I/O windows are 4K-aligned, but some bridges have
* an extension to support 1K alignment.
*/
if (bus->self && bus->self->io_window_1k)
align = PCI_P2P_DEFAULT_IO_ALIGN_1K;
else
align = PCI_P2P_DEFAULT_IO_ALIGN;
}
arch_align = pcibios_window_alignment(bus, type);
return max(align, arch_align);
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
/**
* pbus_size_io() - Size the I/O window of a given bus
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*
* @bus: The bus
* @min_size: The minimum I/O window that must be allocated
* @add_size: Additional optional I/O window
* @realloc_head: Track the additional I/O window on this list
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*
* Sizing the I/O windows of the PCI-PCI bridge is trivial, since these
* windows have 1K or 4K granularity and the I/O ranges of non-bridge PCI
* devices are limited to 256 bytes. We must be careful with the ISA
* aliasing though.
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*/
static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
resource_size_t add_size,
struct list_head *realloc_head)
{
struct pci_dev *dev;
PCI: Avoid double hpmemsize MMIO window assignment Previously, the kernel sometimes assigned more MMIO or MMIO_PREF space than desired. For example, if the user requested 128M of space with "pci=realloc,hpmemsize=128M", we sometimes assigned 256M: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0xa00fffff] = 256M pci 0000:06:04.0: BAR 14: assigned [mem 0xa0200000-0xb01fffff] = 256M With this patch applied: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0x980fffff] = 128M pci 0000:06:04.0: BAR 14: assigned [mem 0x98200000-0xa01fffff] = 128M This happened when in the first pass, the MMIO_PREF succeeded but the MMIO failed. In the next pass, because MMIO_PREF was already assigned, the attempt to assign MMIO_PREF returned an error code instead of success (nothing more to do, already allocated). Hence, the size which was actually allocated, but thought to have failed, was placed in the MMIO window. The bug resulted in the MMIO_PREF being added to the MMIO window, which meant doubling if MMIO_PREF size = MMIO size. With a large MMIO_PREF, the MMIO window would likely fail to be assigned altogether due to lack of 32-bit address space. Change find_free_bus_resource() to do the following: - Return first unassigned resource of the correct type. - If there is none, return first assigned resource of the correct type. - If none of the above, return NULL. Returning an assigned resource of the correct type allows the caller to distinguish between already assigned and no resource of the correct type. Add checks in pbus_size_io() and pbus_size_mem() to return success if resource returned from find_free_bus_resource() is already allocated. This avoids pbus_size_io() and pbus_size_mem() returning error code to __pci_bus_size_bridges() when a resource has been successfully assigned in a previous pass. This fixes the existing behaviour where space for a resource could be reserved multiple times in different parent bridge windows. Link: https://lore.kernel.org/lkml/20190531171216.20532-2-logang@deltatee.com/T/#u Link: https://bugzilla.kernel.org/show_bug.cgi?id=203243 Link: https://lore.kernel.org/r/PS2P216MB075563AA6AD242AA666EDC6A80760@PS2P216MB0755.KORP216.PROD.OUTLOOK.COM Reported-by: Kit Chow <kchow@gigaio.com> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-11-13 22:25:28 +07:00
struct resource *b_res = find_bus_resource_of_type(bus, IORESOURCE_IO,
IORESOURCE_IO);
resource_size_t size = 0, size0 = 0, size1 = 0;
resource_size_t children_add_size = 0;
resource_size_t min_align, align;
if (!b_res)
return;
PCI: Avoid double hpmemsize MMIO window assignment Previously, the kernel sometimes assigned more MMIO or MMIO_PREF space than desired. For example, if the user requested 128M of space with "pci=realloc,hpmemsize=128M", we sometimes assigned 256M: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0xa00fffff] = 256M pci 0000:06:04.0: BAR 14: assigned [mem 0xa0200000-0xb01fffff] = 256M With this patch applied: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0x980fffff] = 128M pci 0000:06:04.0: BAR 14: assigned [mem 0x98200000-0xa01fffff] = 128M This happened when in the first pass, the MMIO_PREF succeeded but the MMIO failed. In the next pass, because MMIO_PREF was already assigned, the attempt to assign MMIO_PREF returned an error code instead of success (nothing more to do, already allocated). Hence, the size which was actually allocated, but thought to have failed, was placed in the MMIO window. The bug resulted in the MMIO_PREF being added to the MMIO window, which meant doubling if MMIO_PREF size = MMIO size. With a large MMIO_PREF, the MMIO window would likely fail to be assigned altogether due to lack of 32-bit address space. Change find_free_bus_resource() to do the following: - Return first unassigned resource of the correct type. - If there is none, return first assigned resource of the correct type. - If none of the above, return NULL. Returning an assigned resource of the correct type allows the caller to distinguish between already assigned and no resource of the correct type. Add checks in pbus_size_io() and pbus_size_mem() to return success if resource returned from find_free_bus_resource() is already allocated. This avoids pbus_size_io() and pbus_size_mem() returning error code to __pci_bus_size_bridges() when a resource has been successfully assigned in a previous pass. This fixes the existing behaviour where space for a resource could be reserved multiple times in different parent bridge windows. Link: https://lore.kernel.org/lkml/20190531171216.20532-2-logang@deltatee.com/T/#u Link: https://bugzilla.kernel.org/show_bug.cgi?id=203243 Link: https://lore.kernel.org/r/PS2P216MB075563AA6AD242AA666EDC6A80760@PS2P216MB0755.KORP216.PROD.OUTLOOK.COM Reported-by: Kit Chow <kchow@gigaio.com> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-11-13 22:25:28 +07:00
/* If resource is already assigned, nothing more to do */
if (b_res->parent)
return;
min_align = window_alignment(bus, IORESOURCE_IO);
list_for_each_entry(dev, &bus->devices, bus_list) {
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
unsigned long r_size;
if (r->parent || !(r->flags & IORESOURCE_IO))
continue;
r_size = resource_size(r);
if (r_size < 0x400)
/* Might be re-aligned for ISA */
size += r_size;
else
size1 += r_size;
align = pci_resource_alignment(dev, r);
if (align > min_align)
min_align = align;
if (realloc_head)
children_add_size += get_res_add_size(realloc_head, r);
}
}
size0 = calculate_iosize(size, min_size, size1, 0, 0,
resource_size(b_res), min_align);
size1 = (!realloc_head || (realloc_head && !add_size && !children_add_size)) ? size0 :
calculate_iosize(size, min_size, size1, add_size, children_add_size,
resource_size(b_res), min_align);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
if (!size0 && !size1) {
if (bus->self && (b_res->start || b_res->end))
pci_info(bus->self, "disabling bridge window %pR to %pR (unused)\n",
b_res, &bus->busn_res);
b_res->flags = 0;
return;
}
b_res->start = min_align;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
b_res->end = b_res->start + size0 - 1;
PCI: clean up resource alignment management Done per Linus' request and suggestions. Linus has explained that better than I'll be able to explain: On Thu, Mar 27, 2008 at 10:12:10AM -0700, Linus Torvalds wrote: > Actually, before we go any further, there might be a less intrusive > alternative: add just a couple of flags to the resource flags field (we > still have something like 8 unused bits on 32-bit), and use those to > implement a generic "resource_alignment()" routine. > > Two flags would do it: > > - IORESOURCE_SIZEALIGN: size indicates alignment (regular PCI device > resources) > > - IORESOURCE_STARTALIGN: start field is alignment (PCI bus resources > during probing) > > and then the case of both flags zero (or both bits set) would actually be > "invalid", and we would also clear the IORESOURCE_STARTALIGN flag when we > actually allocate the resource (so that we don't use the "start" field as > alignment incorrectly when it no longer indicates alignment). > > That wouldn't be totally generic, but it would have the nice property of > automatically at least add sanity checking for that whole "res->start has > the odd meaning of 'alignment' during probing" and remove the need for a > new field, and it would allow us to have a generic "resource_alignment()" > routine that just gets a resource pointer. Besides, I removed IORESOURCE_BUS_HAS_VGA flag which was unused for ages. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-30 22:50:14 +07:00
b_res->flags |= IORESOURCE_STARTALIGN;
if (bus->self && size1 > size0 && realloc_head) {
add_to_list(realloc_head, bus->self, b_res, size1-size0,
min_align);
pci_info(bus->self, "bridge window %pR to %pR add_size %llx\n",
b_res, &bus->busn_res,
(unsigned long long) size1 - size0);
}
}
static inline resource_size_t calculate_mem_align(resource_size_t *aligns,
int max_order)
{
resource_size_t align = 0;
resource_size_t min_align = 0;
int order;
for (order = 0; order <= max_order; order++) {
resource_size_t align1 = 1;
align1 <<= (order + 20);
if (!align)
min_align = align1;
else if (ALIGN(align + min_align, min_align) < align1)
min_align = align1 >> 1;
align += aligns[order];
}
return min_align;
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
/**
* pbus_size_mem() - Size the memory window of a given bus
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*
* @bus: The bus
* @mask: Mask the resource flag, then compare it with type
* @type: The type of free resource from bridge
* @type2: Second match type
* @type3: Third match type
* @min_size: The minimum memory window that must be allocated
* @add_size: Additional optional memory window
* @realloc_head: Track the additional memory window on this list
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*
* Calculate the size of the bus and minimal alignment which guarantees
* that all child resources fit in this size.
*
* Return -ENOSPC if there's no available bus resource of the desired
* type. Otherwise, set the bus resource start/end to indicate the
* required size, add things to realloc_head (if supplied), and return 0.
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
*/
static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
unsigned long type, unsigned long type2,
unsigned long type3, resource_size_t min_size,
resource_size_t add_size,
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
struct list_head *realloc_head)
{
struct pci_dev *dev;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
resource_size_t min_align, align, size, size0, size1;
resource_size_t aligns[18]; /* Alignments from 1MB to 128GB */
int order, max_order;
PCI: Avoid double hpmemsize MMIO window assignment Previously, the kernel sometimes assigned more MMIO or MMIO_PREF space than desired. For example, if the user requested 128M of space with "pci=realloc,hpmemsize=128M", we sometimes assigned 256M: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0xa00fffff] = 256M pci 0000:06:04.0: BAR 14: assigned [mem 0xa0200000-0xb01fffff] = 256M With this patch applied: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0x980fffff] = 128M pci 0000:06:04.0: BAR 14: assigned [mem 0x98200000-0xa01fffff] = 128M This happened when in the first pass, the MMIO_PREF succeeded but the MMIO failed. In the next pass, because MMIO_PREF was already assigned, the attempt to assign MMIO_PREF returned an error code instead of success (nothing more to do, already allocated). Hence, the size which was actually allocated, but thought to have failed, was placed in the MMIO window. The bug resulted in the MMIO_PREF being added to the MMIO window, which meant doubling if MMIO_PREF size = MMIO size. With a large MMIO_PREF, the MMIO window would likely fail to be assigned altogether due to lack of 32-bit address space. Change find_free_bus_resource() to do the following: - Return first unassigned resource of the correct type. - If there is none, return first assigned resource of the correct type. - If none of the above, return NULL. Returning an assigned resource of the correct type allows the caller to distinguish between already assigned and no resource of the correct type. Add checks in pbus_size_io() and pbus_size_mem() to return success if resource returned from find_free_bus_resource() is already allocated. This avoids pbus_size_io() and pbus_size_mem() returning error code to __pci_bus_size_bridges() when a resource has been successfully assigned in a previous pass. This fixes the existing behaviour where space for a resource could be reserved multiple times in different parent bridge windows. Link: https://lore.kernel.org/lkml/20190531171216.20532-2-logang@deltatee.com/T/#u Link: https://bugzilla.kernel.org/show_bug.cgi?id=203243 Link: https://lore.kernel.org/r/PS2P216MB075563AA6AD242AA666EDC6A80760@PS2P216MB0755.KORP216.PROD.OUTLOOK.COM Reported-by: Kit Chow <kchow@gigaio.com> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-11-13 22:25:28 +07:00
struct resource *b_res = find_bus_resource_of_type(bus,
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
mask | IORESOURCE_PREFETCH, type);
resource_size_t children_add_size = 0;
resource_size_t children_add_align = 0;
resource_size_t add_align = 0;
if (!b_res)
return -ENOSPC;
PCI: Avoid double hpmemsize MMIO window assignment Previously, the kernel sometimes assigned more MMIO or MMIO_PREF space than desired. For example, if the user requested 128M of space with "pci=realloc,hpmemsize=128M", we sometimes assigned 256M: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0xa00fffff] = 256M pci 0000:06:04.0: BAR 14: assigned [mem 0xa0200000-0xb01fffff] = 256M With this patch applied: pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0x980fffff] = 128M pci 0000:06:04.0: BAR 14: assigned [mem 0x98200000-0xa01fffff] = 128M This happened when in the first pass, the MMIO_PREF succeeded but the MMIO failed. In the next pass, because MMIO_PREF was already assigned, the attempt to assign MMIO_PREF returned an error code instead of success (nothing more to do, already allocated). Hence, the size which was actually allocated, but thought to have failed, was placed in the MMIO window. The bug resulted in the MMIO_PREF being added to the MMIO window, which meant doubling if MMIO_PREF size = MMIO size. With a large MMIO_PREF, the MMIO window would likely fail to be assigned altogether due to lack of 32-bit address space. Change find_free_bus_resource() to do the following: - Return first unassigned resource of the correct type. - If there is none, return first assigned resource of the correct type. - If none of the above, return NULL. Returning an assigned resource of the correct type allows the caller to distinguish between already assigned and no resource of the correct type. Add checks in pbus_size_io() and pbus_size_mem() to return success if resource returned from find_free_bus_resource() is already allocated. This avoids pbus_size_io() and pbus_size_mem() returning error code to __pci_bus_size_bridges() when a resource has been successfully assigned in a previous pass. This fixes the existing behaviour where space for a resource could be reserved multiple times in different parent bridge windows. Link: https://lore.kernel.org/lkml/20190531171216.20532-2-logang@deltatee.com/T/#u Link: https://bugzilla.kernel.org/show_bug.cgi?id=203243 Link: https://lore.kernel.org/r/PS2P216MB075563AA6AD242AA666EDC6A80760@PS2P216MB0755.KORP216.PROD.OUTLOOK.COM Reported-by: Kit Chow <kchow@gigaio.com> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-11-13 22:25:28 +07:00
/* If resource is already assigned, nothing more to do */
if (b_res->parent)
return 0;
memset(aligns, 0, sizeof(aligns));
max_order = 0;
size = 0;
list_for_each_entry(dev, &bus->devices, bus_list) {
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
resource_size_t r_size;
if (r->parent || (r->flags & IORESOURCE_PCI_FIXED) ||
((r->flags & mask) != type &&
(r->flags & mask) != type2 &&
(r->flags & mask) != type3))
continue;
r_size = resource_size(r);
#ifdef CONFIG_PCI_IOV
/* Put SRIOV requested res to the optional list */
if (realloc_head && i >= PCI_IOV_RESOURCES &&
i <= PCI_IOV_RESOURCE_END) {
add_align = max(pci_resource_alignment(dev, r), add_align);
r->end = r->start - 1;
add_to_list(realloc_head, dev, r, r_size, 0 /* Don't care */);
children_add_size += r_size;
continue;
}
#endif
/*
* aligns[0] is for 1MB (since bridge memory
* windows are always at least 1MB aligned), so
* keep "order" from being negative for smaller
* resources.
*/
PCI SR-IOV: correct broken resource alignment calculations An SR-IOV capable device includes an SR-IOV PCIe capability which describes the Virtual Function (VF) BAR requirements. A typical SR-IOV device can support multiple VFs whose BARs must be in a contiguous region, effectively an array of VF BARs. The BAR reports the size requirement for a single VF. We calculate the full range needed by simply multiplying the VF BAR size with the number of possible VFs and create a resource spanning the full range. This all seems sane enough except it artificially inflates the alignment requirement for the VF BAR. The VF BAR need only be aligned to the size of a single BAR not the contiguous range of VF BARs. This can cause us to fail to allocate resources for the BAR despite the fact that we actually have enough space. This patch adds a thin PCI specific layer over the generic resource_alignment() function which is aware of the special nature of VF BARs and does sorting and allocation based on the smaller alignment requirement. I recognize that while resource_alignment is generic, it's basically a PCI helper. An alternative to this patch is to add PCI VF BAR specific information to struct resource. I opted for the extra layer rather than adding such PCI specific information to struct resource. This does have the slight downside that we don't cache the BAR size and re-read for each alignment query (happens a small handful of times during boot for each VF BAR). Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Yu Zhao <yu.zhao@intel.com> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-29 03:00:06 +07:00
align = pci_resource_alignment(dev, r);
order = __ffs(align) - 20;
if (order < 0)
order = 0;
if (order >= ARRAY_SIZE(aligns)) {
pci_warn(dev, "disabling BAR %d: %pR (bad alignment %#llx)\n",
i, r, (unsigned long long) align);
r->flags = 0;
continue;
}
size += max(r_size, align);
/*
* Exclude ranges with size > align from calculation of
* the alignment.
*/
if (r_size <= align)
aligns[order] += align;
if (order > max_order)
max_order = order;
if (realloc_head) {
children_add_size += get_res_add_size(realloc_head, r);
children_add_align = get_res_add_align(realloc_head, r);
add_align = max(add_align, children_add_align);
}
}
}
min_align = calculate_mem_align(aligns, max_order);
min_align = max(min_align, window_alignment(bus, b_res->flags));
size0 = calculate_memsize(size, min_size, 0, 0, resource_size(b_res), min_align);
add_align = max(min_align, add_align);
size1 = (!realloc_head || (realloc_head && !add_size && !children_add_size)) ? size0 :
calculate_memsize(size, min_size, add_size, children_add_size,
resource_size(b_res), add_align);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
if (!size0 && !size1) {
if (bus->self && (b_res->start || b_res->end))
pci_info(bus->self, "disabling bridge window %pR to %pR (unused)\n",
b_res, &bus->busn_res);
b_res->flags = 0;
return 0;
}
b_res->start = min_align;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
b_res->end = size0 + min_align - 1;
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
b_res->flags |= IORESOURCE_STARTALIGN;
if (bus->self && size1 > size0 && realloc_head) {
add_to_list(realloc_head, bus->self, b_res, size1-size0, add_align);
pci_info(bus->self, "bridge window %pR to %pR add_size %llx add_align %llx\n",
b_res, &bus->busn_res,
(unsigned long long) (size1 - size0),
(unsigned long long) add_align);
}
return 0;
}
unsigned long pci_cardbus_resource_alignment(struct resource *res)
{
if (res->flags & IORESOURCE_IO)
return pci_cardbus_io_size;
if (res->flags & IORESOURCE_MEM)
return pci_cardbus_mem_size;
return 0;
}
static void pci_bus_size_cardbus(struct pci_bus *bus,
struct list_head *realloc_head)
{
struct pci_dev *bridge = bus->self;
struct resource *b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
resource_size_t b_res_3_size = pci_cardbus_mem_size * 2;
u16 ctrl;
if (b_res[0].parent)
goto handle_b_res_1;
/*
* Reserve some resources for CardBus. We reserve a fixed amount
* of bus space for CardBus bridges.
*/
b_res[0].start = pci_cardbus_io_size;
b_res[0].end = b_res[0].start + pci_cardbus_io_size - 1;
b_res[0].flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[0].end -= pci_cardbus_io_size;
add_to_list(realloc_head, bridge, b_res, pci_cardbus_io_size,
pci_cardbus_io_size);
}
handle_b_res_1:
if (b_res[1].parent)
goto handle_b_res_2;
b_res[1].start = pci_cardbus_io_size;
b_res[1].end = b_res[1].start + pci_cardbus_io_size - 1;
b_res[1].flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[1].end -= pci_cardbus_io_size;
add_to_list(realloc_head, bridge, b_res+1, pci_cardbus_io_size,
pci_cardbus_io_size);
}
handle_b_res_2:
/* MEM1 must not be pref MMIO */
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM1) {
ctrl &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
pci_write_config_word(bridge, PCI_CB_BRIDGE_CONTROL, ctrl);
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
}
/* Check whether prefetchable memory is supported by this bridge. */
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
if (!(ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0)) {
ctrl |= PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
pci_write_config_word(bridge, PCI_CB_BRIDGE_CONTROL, ctrl);
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
}
if (b_res[2].parent)
goto handle_b_res_3;
/*
* If we have prefetchable memory support, allocate two regions.
* Otherwise, allocate one region of twice the size.
*/
if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0) {
b_res[2].start = pci_cardbus_mem_size;
b_res[2].end = b_res[2].start + pci_cardbus_mem_size - 1;
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH |
IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[2].end -= pci_cardbus_mem_size;
add_to_list(realloc_head, bridge, b_res+2,
pci_cardbus_mem_size, pci_cardbus_mem_size);
}
/* Reduce that to half */
b_res_3_size = pci_cardbus_mem_size;
}
handle_b_res_3:
if (b_res[3].parent)
goto handle_done;
b_res[3].start = pci_cardbus_mem_size;
b_res[3].end = b_res[3].start + b_res_3_size - 1;
b_res[3].flags |= IORESOURCE_MEM | IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[3].end -= b_res_3_size;
add_to_list(realloc_head, bridge, b_res+3, b_res_3_size,
pci_cardbus_mem_size);
}
handle_done:
;
}
void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
{
struct pci_dev *dev;
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
unsigned long mask, prefmask, type2 = 0, type3 = 0;
resource_size_t additional_io_size = 0, additional_mmio_size = 0,
additional_mmio_pref_size = 0;
struct resource *pref;
struct pci_host_bridge *host;
int hdr_type, i, ret;
list_for_each_entry(dev, &bus->devices, bus_list) {
struct pci_bus *b = dev->subordinate;
if (!b)
continue;
switch (dev->hdr_type) {
case PCI_HEADER_TYPE_CARDBUS:
pci_bus_size_cardbus(b, realloc_head);
break;
case PCI_HEADER_TYPE_BRIDGE:
default:
__pci_bus_size_bridges(b, realloc_head);
break;
}
}
/* The root bus? */
if (pci_is_root_bus(bus)) {
host = to_pci_host_bridge(bus->bridge);
if (!host->size_windows)
return;
pci_bus_for_each_resource(bus, pref, i)
if (pref && (pref->flags & IORESOURCE_PREFETCH))
break;
hdr_type = -1; /* Intentionally invalid - not a PCI device. */
} else {
pref = &bus->self->resource[PCI_BRIDGE_RESOURCES + 2];
hdr_type = bus->self->hdr_type;
}
switch (hdr_type) {
case PCI_HEADER_TYPE_CARDBUS:
/* Don't size CardBuses yet */
break;
case PCI_HEADER_TYPE_BRIDGE:
pci_bridge_check_ranges(bus);
if (bus->self->is_hotplug_bridge) {
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
additional_io_size = pci_hotplug_io_size;
additional_mmio_size = pci_hotplug_mmio_size;
additional_mmio_pref_size = pci_hotplug_mmio_pref_size;
}
/* Fall through */
default:
pbus_size_io(bus, realloc_head ? 0 : additional_io_size,
additional_io_size, realloc_head);
/*
* If there's a 64-bit prefetchable MMIO window, compute
* the size required to put all 64-bit prefetchable
* resources in it.
*/
mask = IORESOURCE_MEM;
prefmask = IORESOURCE_MEM | IORESOURCE_PREFETCH;
if (pref && (pref->flags & IORESOURCE_MEM_64)) {
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
prefmask |= IORESOURCE_MEM_64;
ret = pbus_size_mem(bus, prefmask, prefmask,
prefmask, prefmask,
realloc_head ? 0 : additional_mmio_pref_size,
additional_mmio_pref_size, realloc_head);
/*
* If successful, all non-prefetchable resources
* and any 32-bit prefetchable resources will go in
* the non-prefetchable window.
*/
if (ret == 0) {
mask = prefmask;
type2 = prefmask & ~IORESOURCE_MEM_64;
type3 = prefmask & ~IORESOURCE_PREFETCH;
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
}
}
/*
* If there is no 64-bit prefetchable window, compute the
* size required to put all prefetchable resources in the
* 32-bit prefetchable window (if there is one).
*/
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
if (!type2) {
prefmask &= ~IORESOURCE_MEM_64;
ret = pbus_size_mem(bus, prefmask, prefmask,
prefmask, prefmask,
realloc_head ? 0 : additional_mmio_pref_size,
additional_mmio_pref_size, realloc_head);
/*
* If successful, only non-prefetchable resources
* will go in the non-prefetchable window.
*/
if (ret == 0)
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
mask = prefmask;
else
additional_mmio_size += additional_mmio_pref_size;
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
type2 = type3 = IORESOURCE_MEM;
}
/*
* Compute the size required to put everything else in the
* non-prefetchable window. This includes:
*
* - all non-prefetchable resources
* - 32-bit prefetchable resources if there's a 64-bit
* prefetchable window or no prefetchable window at all
* - 64-bit prefetchable resources if there's no prefetchable
* window at all
*
* Note that the strategy in __pci_assign_resource() must match
* that used here. Specifically, we cannot put a 32-bit
* prefetchable resource in a 64-bit prefetchable window.
*/
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
pbus_size_mem(bus, mask, IORESOURCE_MEM, type2, type3,
realloc_head ? 0 : additional_mmio_size,
additional_mmio_size, realloc_head);
break;
}
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
void pci_bus_size_bridges(struct pci_bus *bus)
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
{
__pci_bus_size_bridges(bus, NULL);
}
EXPORT_SYMBOL(pci_bus_size_bridges);
static void assign_fixed_resource_on_bus(struct pci_bus *b, struct resource *r)
{
int i;
struct resource *parent_r;
unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
pci_bus_for_each_resource(b, parent_r, i) {
if (!parent_r)
continue;
if ((r->flags & mask) == (parent_r->flags & mask) &&
resource_contains(parent_r, r))
request_resource(parent_r, r);
}
}
/*
* Try to assign any resources marked as IORESOURCE_PCI_FIXED, as they are
* skipped by pbus_assign_resources_sorted().
*/
static void pdev_assign_fixed_resources(struct pci_dev *dev)
{
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct pci_bus *b;
struct resource *r = &dev->resource[i];
if (r->parent || !(r->flags & IORESOURCE_PCI_FIXED) ||
!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
continue;
b = dev->bus;
while (b && !r->parent) {
assign_fixed_resource_on_bus(b, r);
b = b->parent;
}
}
}
void __pci_bus_assign_resources(const struct pci_bus *bus,
struct list_head *realloc_head,
struct list_head *fail_head)
{
struct pci_bus *b;
struct pci_dev *dev;
pbus_assign_resources_sorted(bus, realloc_head, fail_head);
list_for_each_entry(dev, &bus->devices, bus_list) {
pdev_assign_fixed_resources(dev);
b = dev->subordinate;
if (!b)
continue;
__pci_bus_assign_resources(b, realloc_head, fail_head);
switch (dev->hdr_type) {
case PCI_HEADER_TYPE_BRIDGE:
if (!pci_is_enabled(dev))
pci_setup_bridge(b);
break;
case PCI_HEADER_TYPE_CARDBUS:
pci_setup_cardbus(b);
break;
default:
pci_info(dev, "not setting up bridge for bus %04x:%02x\n",
pci_domain_nr(b), b->number);
break;
}
}
}
void pci_bus_assign_resources(const struct pci_bus *bus)
{
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
__pci_bus_assign_resources(bus, NULL, NULL);
}
EXPORT_SYMBOL(pci_bus_assign_resources);
static void pci_claim_device_resources(struct pci_dev *dev)
{
int i;
for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
if (!r->flags || r->parent)
continue;
pci_claim_resource(dev, i);
}
}
static void pci_claim_bridge_resources(struct pci_dev *dev)
{
int i;
for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
if (!r->flags || r->parent)
continue;
pci_claim_bridge_resource(dev, i);
}
}
static void pci_bus_allocate_dev_resources(struct pci_bus *b)
{
struct pci_dev *dev;
struct pci_bus *child;
list_for_each_entry(dev, &b->devices, bus_list) {
pci_claim_device_resources(dev);
child = dev->subordinate;
if (child)
pci_bus_allocate_dev_resources(child);
}
}
static void pci_bus_allocate_resources(struct pci_bus *b)
{
struct pci_bus *child;
/*
* Carry out a depth-first search on the PCI bus tree to allocate
* bridge apertures. Read the programmed bridge bases and
* recursively claim the respective bridge resources.
*/
if (b->self) {
pci_read_bridge_bases(b);
pci_claim_bridge_resources(b->self);
}
list_for_each_entry(child, &b->children, node)
pci_bus_allocate_resources(child);
}
void pci_bus_claim_resources(struct pci_bus *b)
{
pci_bus_allocate_resources(b);
pci_bus_allocate_dev_resources(b);
}
EXPORT_SYMBOL(pci_bus_claim_resources);
static void __pci_bridge_assign_resources(const struct pci_dev *bridge,
struct list_head *add_head,
struct list_head *fail_head)
{
struct pci_bus *b;
pdev_assign_resources_sorted((struct pci_dev *)bridge,
add_head, fail_head);
b = bridge->subordinate;
if (!b)
return;
__pci_bus_assign_resources(b, add_head, fail_head);
switch (bridge->class >> 8) {
case PCI_CLASS_BRIDGE_PCI:
pci_setup_bridge(b);
break;
case PCI_CLASS_BRIDGE_CARDBUS:
pci_setup_cardbus(b);
break;
default:
pci_info(bridge, "not setting up bridge for bus %04x:%02x\n",
pci_domain_nr(b), b->number);
break;
}
}
#define PCI_RES_TYPE_MASK \
(IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH |\
IORESOURCE_MEM_64)
static void pci_bridge_release_resources(struct pci_bus *bus,
unsigned long type)
{
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
struct pci_dev *dev = bus->self;
struct resource *r;
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
unsigned old_flags = 0;
struct resource *b_res;
int idx = 1;
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
b_res = &dev->resource[PCI_BRIDGE_RESOURCES];
/*
* 1. If IO port assignment fails, release bridge IO port.
* 2. If non pref MMIO assignment fails, release bridge nonpref MMIO.
* 3. If 64bit pref MMIO assignment fails, and bridge pref is 64bit,
* release bridge pref MMIO.
* 4. If pref MMIO assignment fails, and bridge pref is 32bit,
* release bridge pref MMIO.
* 5. If pref MMIO assignment fails, and bridge pref is not
* assigned, release bridge nonpref MMIO.
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
*/
if (type & IORESOURCE_IO)
idx = 0;
else if (!(type & IORESOURCE_PREFETCH))
idx = 1;
else if ((type & IORESOURCE_MEM_64) &&
(b_res[2].flags & IORESOURCE_MEM_64))
idx = 2;
else if (!(b_res[2].flags & IORESOURCE_MEM_64) &&
(b_res[2].flags & IORESOURCE_PREFETCH))
idx = 2;
else
idx = 1;
r = &b_res[idx];
if (!r->parent)
return;
/* If there are children, release them all */
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
release_child_resources(r);
if (!release_resource(r)) {
type = old_flags = r->flags & PCI_RES_TYPE_MASK;
pci_info(dev, "resource %d %pR released\n",
PCI_BRIDGE_RESOURCES + idx, r);
/* Keep the old size */
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
r->end = resource_size(r) - 1;
r->start = 0;
r->flags = 0;
/* Avoiding touch the one without PREF */
if (type & IORESOURCE_PREFETCH)
type = IORESOURCE_PREFETCH;
__pci_setup_bridge(bus, type);
/* For next child res under same bridge */
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-20 06:01:55 +07:00
r->flags = old_flags;
}
}
enum release_type {
leaf_only,
whole_subtree,
};
/*
* Try to release PCI bridge resources from leaf bridge, so we can allocate
* a larger window later.
*/
static void pci_bus_release_bridge_resources(struct pci_bus *bus,
unsigned long type,
enum release_type rel_type)
{
struct pci_dev *dev;
bool is_leaf_bridge = true;
list_for_each_entry(dev, &bus->devices, bus_list) {
struct pci_bus *b = dev->subordinate;
if (!b)
continue;
is_leaf_bridge = false;
if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
continue;
if (rel_type == whole_subtree)
pci_bus_release_bridge_resources(b, type,
whole_subtree);
}
if (pci_is_root_bus(bus))
return;
if ((bus->self->class >> 8) != PCI_CLASS_BRIDGE_PCI)
return;
if ((rel_type == whole_subtree) || is_leaf_bridge)
pci_bridge_release_resources(bus, type);
}
static void pci_bus_dump_res(struct pci_bus *bus)
{
struct resource *res;
int i;
pci_bus_for_each_resource(bus, res, i) {
if (!res || !res->end || !res->flags)
continue;
dev_info(&bus->dev, "resource %d %pR\n", i, res);
}
}
static void pci_bus_dump_resources(struct pci_bus *bus)
{
struct pci_bus *b;
struct pci_dev *dev;
pci_bus_dump_res(bus);
list_for_each_entry(dev, &bus->devices, bus_list) {
b = dev->subordinate;
if (!b)
continue;
pci_bus_dump_resources(b);
}
}
static int pci_bus_get_depth(struct pci_bus *bus)
{
int depth = 0;
struct pci_bus *child_bus;
list_for_each_entry(child_bus, &bus->children, node) {
int ret;
ret = pci_bus_get_depth(child_bus);
if (ret + 1 > depth)
depth = ret + 1;
}
return depth;
}
/*
* -1: undefined, will auto detect later
* 0: disabled by user
* 1: disabled by auto detect
* 2: enabled by user
* 3: enabled by auto detect
*/
enum enable_type {
undefined = -1,
user_disabled,
auto_disabled,
user_enabled,
auto_enabled,
};
static enum enable_type pci_realloc_enable = undefined;
void __init pci_realloc_get_opt(char *str)
{
if (!strncmp(str, "off", 3))
pci_realloc_enable = user_disabled;
else if (!strncmp(str, "on", 2))
pci_realloc_enable = user_enabled;
}
static bool pci_realloc_enabled(enum enable_type enable)
{
return enable >= user_enabled;
}
#if defined(CONFIG_PCI_IOV) && defined(CONFIG_PCI_REALLOC_ENABLE_AUTO)
static int iov_resources_unassigned(struct pci_dev *dev, void *data)
{
int i;
bool *unassigned = data;
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
struct resource *r = &dev->resource[i + PCI_IOV_RESOURCES];
struct pci_bus_region region;
/* Not assigned or rejected by kernel? */
if (!r->flags)
continue;
pcibios_resource_to_bus(dev->bus, &region, r);
if (!region.start) {
*unassigned = true;
return 1; /* Return early from pci_walk_bus() */
}
}
return 0;
}
static enum enable_type pci_realloc_detect(struct pci_bus *bus,
enum enable_type enable_local)
{
bool unassigned = false;
struct pci_host_bridge *host;
if (enable_local != undefined)
return enable_local;
host = pci_find_host_bridge(bus);
if (host->preserve_config)
return auto_disabled;
pci_walk_bus(bus, iov_resources_unassigned, &unassigned);
if (unassigned)
return auto_enabled;
return enable_local;
}
#else
static enum enable_type pci_realloc_detect(struct pci_bus *bus,
enum enable_type enable_local)
{
return enable_local;
}
#endif
/*
* First try will not touch PCI bridge res.
* Second and later try will clear small leaf bridge res.
* Will stop till to the max depth if can not find good one.
*/
void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
{
LIST_HEAD(realloc_head);
/* List of resources that want additional resources */
struct list_head *add_list = NULL;
int tried_times = 0;
enum release_type rel_type = leaf_only;
LIST_HEAD(fail_head);
struct pci_dev_resource *fail_res;
int pci_try_num = 1;
enum enable_type enable_local;
/* Don't realloc if asked to do so */
enable_local = pci_realloc_detect(bus, pci_realloc_enable);
if (pci_realloc_enabled(enable_local)) {
int max_depth = pci_bus_get_depth(bus);
pci_try_num = max_depth + 1;
dev_info(&bus->dev, "max bus depth: %d pci_try_num: %d\n",
max_depth, pci_try_num);
}
again:
/*
* Last try will use add_list, otherwise will try good to have as must
* have, so can realloc parent bridge resource
*/
if (tried_times + 1 == pci_try_num)
add_list = &realloc_head;
/*
* Depth first, calculate sizes and alignments of all subordinate buses.
*/
__pci_bus_size_bridges(bus, add_list);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 08:43:20 +07:00
/* Depth last, allocate resources and update the hardware. */
__pci_bus_assign_resources(bus, add_list, &fail_head);
if (add_list)
BUG_ON(!list_empty(add_list));
tried_times++;
/* Any device complain? */
if (list_empty(&fail_head))
goto dump;
if (tried_times >= pci_try_num) {
if (enable_local == undefined)
dev_info(&bus->dev, "Some PCI device resources are unassigned, try booting with pci=realloc\n");
else if (enable_local == auto_enabled)
dev_info(&bus->dev, "Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off\n");
free_list(&fail_head);
goto dump;
}
dev_info(&bus->dev, "No. %d try to assign unassigned res\n",
tried_times + 1);
/* Third times and later will not check if it is leaf */
if ((tried_times + 1) > 2)
rel_type = whole_subtree;
/*
* Try to release leaf bridge's resources that doesn't fit resource of
* child device under that bridge.
*/
list_for_each_entry(fail_res, &fail_head, list)
pci_bus_release_bridge_resources(fail_res->dev->bus,
fail_res->flags & PCI_RES_TYPE_MASK,
rel_type);
/* Restore size and flags */
list_for_each_entry(fail_res, &fail_head, list) {
struct resource *res = fail_res->res;
PCI: Don't disable bridge BARs when assigning bus resources Some PCI bridges implement BARs in addition to bridge windows. For example, here's a PLX switch: 04:00.0 PCI bridge: PLX Technology, Inc. PEX 8724 24-Lane, 6-Port PCI Express Gen 3 (8 GT/s) Switch, 19 x 19mm FCBGA (rev ca) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 30, NUMA node 0 Memory at 90a00000 (32-bit, non-prefetchable) [size=256K] Bus: primary=04, secondary=05, subordinate=0a, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: 90000000-909fffff Prefetchable memory behind bridge: 0000380000800000-0000380000bfffff Previously, when the kernel assigned resource addresses (with the pci=realloc command line parameter, for example) it could clear the struct resource corresponding to the BAR. When this happened, lspci would report this BAR as "ignored": Region 0: Memory at <ignored> (32-bit, non-prefetchable) [size=256K] This is because the kernel reports a zero start address and zero flags in the corresponding sysfs resource file and in /proc/bus/pci/devices. Investigation with 'lspci -x', however, shows the BIOS-assigned address will still be programmed in the device's BAR registers. It's clearly a bug that the kernel lost track of the BAR value, but in most cases, this still won't result in a visible issue because nothing uses the memory, so nothing is affected. However, when an IOMMU is in use, it will not reserve this space in the IOVA because the kernel no longer thinks the range is valid. (See dmar_init_reserved_ranges() for the Intel implementation of this.) Without the proper reserved range, a DMA mapping may allocate an IOVA that matches a bridge BAR, which results in DMA accesses going to the BAR instead of the intended RAM. The problem was in pci_assign_unassigned_root_bus_resources(). When any resource from a bridge device fails to get assigned, the code set the resource's flags to zero. This makes sense for bridge windows, as they will be re-enabled later, but for regular BARs, it makes the kernel permanently lose track of the fact that they decode address space. Change pci_assign_unassigned_root_bus_resources() and pci_assign_unassigned_bridge_resources() so they only clear "res->flags" for bridge *windows*, not bridge BARs. Fixes: da7822e5ad71 ("PCI: update bridge resources to get more big ranges when allocating space (again)") Link: https://lore.kernel.org/r/20200108213208.4612-1-logang@deltatee.com [bhelgaas: commit log, check for pci_is_bridge()] Reported-by: Kit Chow <kchow@gigaio.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-09 04:32:08 +07:00
int idx;
res->start = fail_res->start;
res->end = fail_res->end;
res->flags = fail_res->flags;
PCI: Don't disable bridge BARs when assigning bus resources Some PCI bridges implement BARs in addition to bridge windows. For example, here's a PLX switch: 04:00.0 PCI bridge: PLX Technology, Inc. PEX 8724 24-Lane, 6-Port PCI Express Gen 3 (8 GT/s) Switch, 19 x 19mm FCBGA (rev ca) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 30, NUMA node 0 Memory at 90a00000 (32-bit, non-prefetchable) [size=256K] Bus: primary=04, secondary=05, subordinate=0a, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: 90000000-909fffff Prefetchable memory behind bridge: 0000380000800000-0000380000bfffff Previously, when the kernel assigned resource addresses (with the pci=realloc command line parameter, for example) it could clear the struct resource corresponding to the BAR. When this happened, lspci would report this BAR as "ignored": Region 0: Memory at <ignored> (32-bit, non-prefetchable) [size=256K] This is because the kernel reports a zero start address and zero flags in the corresponding sysfs resource file and in /proc/bus/pci/devices. Investigation with 'lspci -x', however, shows the BIOS-assigned address will still be programmed in the device's BAR registers. It's clearly a bug that the kernel lost track of the BAR value, but in most cases, this still won't result in a visible issue because nothing uses the memory, so nothing is affected. However, when an IOMMU is in use, it will not reserve this space in the IOVA because the kernel no longer thinks the range is valid. (See dmar_init_reserved_ranges() for the Intel implementation of this.) Without the proper reserved range, a DMA mapping may allocate an IOVA that matches a bridge BAR, which results in DMA accesses going to the BAR instead of the intended RAM. The problem was in pci_assign_unassigned_root_bus_resources(). When any resource from a bridge device fails to get assigned, the code set the resource's flags to zero. This makes sense for bridge windows, as they will be re-enabled later, but for regular BARs, it makes the kernel permanently lose track of the fact that they decode address space. Change pci_assign_unassigned_root_bus_resources() and pci_assign_unassigned_bridge_resources() so they only clear "res->flags" for bridge *windows*, not bridge BARs. Fixes: da7822e5ad71 ("PCI: update bridge resources to get more big ranges when allocating space (again)") Link: https://lore.kernel.org/r/20200108213208.4612-1-logang@deltatee.com [bhelgaas: commit log, check for pci_is_bridge()] Reported-by: Kit Chow <kchow@gigaio.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-09 04:32:08 +07:00
if (pci_is_bridge(fail_res->dev)) {
idx = res - &fail_res->dev->resource[0];
if (idx >= PCI_BRIDGE_RESOURCES &&
idx <= PCI_BRIDGE_RESOURCE_END)
res->flags = 0;
}
}
free_list(&fail_head);
goto again;
dump:
/* Dump the resource on buses */
pci_bus_dump_resources(bus);
}
void __init pci_assign_unassigned_resources(void)
{
struct pci_bus *root_bus;
list_for_each_entry(root_bus, &pci_root_buses, node) {
pci_assign_unassigned_root_bus_resources(root_bus);
/* Make sure the root bridge has a companion ACPI device */
if (ACPI_HANDLE(root_bus->bridge))
acpi_ioapic_add(ACPI_HANDLE(root_bus->bridge));
}
}
static void adjust_bridge_window(struct pci_dev *bridge, struct resource *res,
struct list_head *add_list,
resource_size_t new_size)
{
resource_size_t add_size, size = resource_size(res);
if (res->parent)
return;
if (!new_size)
return;
if (new_size > size) {
add_size = new_size - size;
pci_dbg(bridge, "bridge window %pR extended by %pa\n", res,
&add_size);
} else if (new_size < size) {
add_size = size - new_size;
pci_dbg(bridge, "bridge window %pR shrunken by %pa\n", res,
&add_size);
}
res->end = res->start + new_size - 1;
remove_from_list(add_list, res);
}
static void pci_bus_distribute_available_resources(struct pci_bus *bus,
struct list_head *add_list,
struct resource io,
struct resource mmio,
struct resource mmio_pref)
{
unsigned int normal_bridges = 0, hotplug_bridges = 0;
struct resource *io_res, *mmio_res, *mmio_pref_res;
struct pci_dev *dev, *bridge = bus->self;
PCI: Consider alignment of hot-added bridges when assigning resources Change pci_bus_distribute_available_resources() to better handle bridges with different resource alignment requirements. The arguments io, mmio and mmio_pref represent the start and end addresses of resource, into which we must fit the current bridge window. The steps taken by pci_bus_distribute_available_resources(): - For io, mmio and mmio_pref, increase .start to align with the alignment of the current bridge window (otherwise the current bridge window may not fit within the available range). - For io, mmio and mmio_pref, adjust the current bridge window to the size after the above. - Count the number of hotplug bridges and normal bridges on this bus. - If the total number of bridges is one, give that bridge all of the resources and return. - If there are no hotplug bridges, return. - For io, mmio and mmio_pref, increase .start by the amount required for each bridge resource on the bus for non hotplug bridges, giving extra room to make up for alignment of those resources. - For io, mmio and mmio_pref, calculate the resource size per hotplug bridge which is available after the previous steps. - For io, mmio and mmio_pref, distribute the resources to each hotplug bridge, with the sizes calculated above. The motivation for fixing this is enabling devices that require greater than 1MB alignment. This fixes the case where the user hot-adds devices with BAR alignment >1MB and Linux fails to assign resources to it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581 Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-06 22:46:13 +07:00
resource_size_t io_per_hp, mmio_per_hp, mmio_pref_per_hp, align;
io_res = &bridge->resource[PCI_BRIDGE_RESOURCES + 0];
mmio_res = &bridge->resource[PCI_BRIDGE_RESOURCES + 1];
mmio_pref_res = &bridge->resource[PCI_BRIDGE_RESOURCES + 2];
PCI: Consider alignment of hot-added bridges when assigning resources Change pci_bus_distribute_available_resources() to better handle bridges with different resource alignment requirements. The arguments io, mmio and mmio_pref represent the start and end addresses of resource, into which we must fit the current bridge window. The steps taken by pci_bus_distribute_available_resources(): - For io, mmio and mmio_pref, increase .start to align with the alignment of the current bridge window (otherwise the current bridge window may not fit within the available range). - For io, mmio and mmio_pref, adjust the current bridge window to the size after the above. - Count the number of hotplug bridges and normal bridges on this bus. - If the total number of bridges is one, give that bridge all of the resources and return. - If there are no hotplug bridges, return. - For io, mmio and mmio_pref, increase .start by the amount required for each bridge resource on the bus for non hotplug bridges, giving extra room to make up for alignment of those resources. - For io, mmio and mmio_pref, calculate the resource size per hotplug bridge which is available after the previous steps. - For io, mmio and mmio_pref, distribute the resources to each hotplug bridge, with the sizes calculated above. The motivation for fixing this is enabling devices that require greater than 1MB alignment. This fixes the case where the user hot-adds devices with BAR alignment >1MB and Linux fails to assign resources to it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581 Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-06 22:46:13 +07:00
/*
* The alignment of this bridge is yet to be considered, hence it must
* be done now before extending its bridge window.
*/
align = pci_resource_alignment(bridge, io_res);
if (!io_res->parent && align)
io.start = min(ALIGN(io.start, align), io.end + 1);
align = pci_resource_alignment(bridge, mmio_res);
if (!mmio_res->parent && align)
mmio.start = min(ALIGN(mmio.start, align), mmio.end + 1);
align = pci_resource_alignment(bridge, mmio_pref_res);
if (!mmio_pref_res->parent && align)
mmio_pref.start = min(ALIGN(mmio_pref.start, align),
mmio_pref.end + 1);
/*
* Now that we have adjusted for alignment, update the bridge window
* resources to fill as much remaining resource space as possible.
*/
adjust_bridge_window(bridge, io_res, add_list, resource_size(&io));
adjust_bridge_window(bridge, mmio_res, add_list, resource_size(&mmio));
adjust_bridge_window(bridge, mmio_pref_res, add_list,
resource_size(&mmio_pref));
/*
* Calculate how many hotplug bridges and normal bridges there
* are on this bus. We will distribute the additional available
* resources between hotplug bridges.
*/
for_each_pci_bridge(dev, bus) {
if (dev->is_hotplug_bridge)
hotplug_bridges++;
else
normal_bridges++;
}
/*
* There is only one bridge on the bus so it gets all available
* resources which it can then distribute to the possible hotplug
* bridges below.
*/
if (hotplug_bridges + normal_bridges == 1) {
dev = list_first_entry(&bus->devices, struct pci_dev, bus_list);
if (dev->subordinate)
pci_bus_distribute_available_resources(dev->subordinate,
add_list, io, mmio, mmio_pref);
return;
}
if (hotplug_bridges == 0)
return;
/*
* Calculate the total amount of extra resource space we can
* pass to bridges below this one. This is basically the
* extra space reduced by the minimal required space for the
* non-hotplug bridges.
*/
for_each_pci_bridge(dev, bus) {
PCI: Consider alignment of hot-added bridges when assigning resources Change pci_bus_distribute_available_resources() to better handle bridges with different resource alignment requirements. The arguments io, mmio and mmio_pref represent the start and end addresses of resource, into which we must fit the current bridge window. The steps taken by pci_bus_distribute_available_resources(): - For io, mmio and mmio_pref, increase .start to align with the alignment of the current bridge window (otherwise the current bridge window may not fit within the available range). - For io, mmio and mmio_pref, adjust the current bridge window to the size after the above. - Count the number of hotplug bridges and normal bridges on this bus. - If the total number of bridges is one, give that bridge all of the resources and return. - If there are no hotplug bridges, return. - For io, mmio and mmio_pref, increase .start by the amount required for each bridge resource on the bus for non hotplug bridges, giving extra room to make up for alignment of those resources. - For io, mmio and mmio_pref, calculate the resource size per hotplug bridge which is available after the previous steps. - For io, mmio and mmio_pref, distribute the resources to each hotplug bridge, with the sizes calculated above. The motivation for fixing this is enabling devices that require greater than 1MB alignment. This fixes the case where the user hot-adds devices with BAR alignment >1MB and Linux fails to assign resources to it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581 Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-06 22:46:13 +07:00
resource_size_t used_size;
struct resource *res;
if (dev->is_hotplug_bridge)
continue;
/*
* Reduce the available resource space by what the
* bridge and devices below it occupy.
*/
res = &dev->resource[PCI_BRIDGE_RESOURCES + 0];
PCI: Consider alignment of hot-added bridges when assigning resources Change pci_bus_distribute_available_resources() to better handle bridges with different resource alignment requirements. The arguments io, mmio and mmio_pref represent the start and end addresses of resource, into which we must fit the current bridge window. The steps taken by pci_bus_distribute_available_resources(): - For io, mmio and mmio_pref, increase .start to align with the alignment of the current bridge window (otherwise the current bridge window may not fit within the available range). - For io, mmio and mmio_pref, adjust the current bridge window to the size after the above. - Count the number of hotplug bridges and normal bridges on this bus. - If the total number of bridges is one, give that bridge all of the resources and return. - If there are no hotplug bridges, return. - For io, mmio and mmio_pref, increase .start by the amount required for each bridge resource on the bus for non hotplug bridges, giving extra room to make up for alignment of those resources. - For io, mmio and mmio_pref, calculate the resource size per hotplug bridge which is available after the previous steps. - For io, mmio and mmio_pref, distribute the resources to each hotplug bridge, with the sizes calculated above. The motivation for fixing this is enabling devices that require greater than 1MB alignment. This fixes the case where the user hot-adds devices with BAR alignment >1MB and Linux fails to assign resources to it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581 Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-06 22:46:13 +07:00
align = pci_resource_alignment(dev, res);
align = align ? ALIGN(io.start, align) - io.start : 0;
used_size = align + resource_size(res);
if (!res->parent)
io.start = min(io.start + used_size, io.end + 1);
res = &dev->resource[PCI_BRIDGE_RESOURCES + 1];
PCI: Consider alignment of hot-added bridges when assigning resources Change pci_bus_distribute_available_resources() to better handle bridges with different resource alignment requirements. The arguments io, mmio and mmio_pref represent the start and end addresses of resource, into which we must fit the current bridge window. The steps taken by pci_bus_distribute_available_resources(): - For io, mmio and mmio_pref, increase .start to align with the alignment of the current bridge window (otherwise the current bridge window may not fit within the available range). - For io, mmio and mmio_pref, adjust the current bridge window to the size after the above. - Count the number of hotplug bridges and normal bridges on this bus. - If the total number of bridges is one, give that bridge all of the resources and return. - If there are no hotplug bridges, return. - For io, mmio and mmio_pref, increase .start by the amount required for each bridge resource on the bus for non hotplug bridges, giving extra room to make up for alignment of those resources. - For io, mmio and mmio_pref, calculate the resource size per hotplug bridge which is available after the previous steps. - For io, mmio and mmio_pref, distribute the resources to each hotplug bridge, with the sizes calculated above. The motivation for fixing this is enabling devices that require greater than 1MB alignment. This fixes the case where the user hot-adds devices with BAR alignment >1MB and Linux fails to assign resources to it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581 Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-06 22:46:13 +07:00
align = pci_resource_alignment(dev, res);
align = align ? ALIGN(mmio.start, align) - mmio.start : 0;
used_size = align + resource_size(res);
if (!res->parent)
mmio.start = min(mmio.start + used_size, mmio.end + 1);
res = &dev->resource[PCI_BRIDGE_RESOURCES + 2];
PCI: Consider alignment of hot-added bridges when assigning resources Change pci_bus_distribute_available_resources() to better handle bridges with different resource alignment requirements. The arguments io, mmio and mmio_pref represent the start and end addresses of resource, into which we must fit the current bridge window. The steps taken by pci_bus_distribute_available_resources(): - For io, mmio and mmio_pref, increase .start to align with the alignment of the current bridge window (otherwise the current bridge window may not fit within the available range). - For io, mmio and mmio_pref, adjust the current bridge window to the size after the above. - Count the number of hotplug bridges and normal bridges on this bus. - If the total number of bridges is one, give that bridge all of the resources and return. - If there are no hotplug bridges, return. - For io, mmio and mmio_pref, increase .start by the amount required for each bridge resource on the bus for non hotplug bridges, giving extra room to make up for alignment of those resources. - For io, mmio and mmio_pref, calculate the resource size per hotplug bridge which is available after the previous steps. - For io, mmio and mmio_pref, distribute the resources to each hotplug bridge, with the sizes calculated above. The motivation for fixing this is enabling devices that require greater than 1MB alignment. This fixes the case where the user hot-adds devices with BAR alignment >1MB and Linux fails to assign resources to it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581 Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-06 22:46:13 +07:00
align = pci_resource_alignment(dev, res);
align = align ? ALIGN(mmio_pref.start, align) -
mmio_pref.start : 0;
used_size = align + resource_size(res);
if (!res->parent)
mmio_pref.start = min(mmio_pref.start + used_size,
mmio_pref.end + 1);
}
PCI: Consider alignment of hot-added bridges when assigning resources Change pci_bus_distribute_available_resources() to better handle bridges with different resource alignment requirements. The arguments io, mmio and mmio_pref represent the start and end addresses of resource, into which we must fit the current bridge window. The steps taken by pci_bus_distribute_available_resources(): - For io, mmio and mmio_pref, increase .start to align with the alignment of the current bridge window (otherwise the current bridge window may not fit within the available range). - For io, mmio and mmio_pref, adjust the current bridge window to the size after the above. - Count the number of hotplug bridges and normal bridges on this bus. - If the total number of bridges is one, give that bridge all of the resources and return. - If there are no hotplug bridges, return. - For io, mmio and mmio_pref, increase .start by the amount required for each bridge resource on the bus for non hotplug bridges, giving extra room to make up for alignment of those resources. - For io, mmio and mmio_pref, calculate the resource size per hotplug bridge which is available after the previous steps. - For io, mmio and mmio_pref, distribute the resources to each hotplug bridge, with the sizes calculated above. The motivation for fixing this is enabling devices that require greater than 1MB alignment. This fixes the case where the user hot-adds devices with BAR alignment >1MB and Linux fails to assign resources to it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581 Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-06 22:46:13 +07:00
io_per_hp = div64_ul(resource_size(&io), hotplug_bridges);
mmio_per_hp = div64_ul(resource_size(&mmio), hotplug_bridges);
mmio_pref_per_hp = div64_ul(resource_size(&mmio_pref),
hotplug_bridges);
/*
* Go over devices on this bus and distribute the remaining
* resource space between hotplug bridges.
*/
for_each_pci_bridge(dev, bus) {
struct pci_bus *b;
b = dev->subordinate;
if (!b || !dev->is_hotplug_bridge)
continue;
/*
* Distribute available extra resources equally between
* hotplug-capable downstream ports taking alignment into
* account.
*/
io.end = io.start + io_per_hp - 1;
mmio.end = mmio.start + mmio_per_hp - 1;
mmio_pref.end = mmio_pref.start + mmio_pref_per_hp - 1;
pci_bus_distribute_available_resources(b, add_list, io, mmio,
mmio_pref);
PCI: Consider alignment of hot-added bridges when assigning resources Change pci_bus_distribute_available_resources() to better handle bridges with different resource alignment requirements. The arguments io, mmio and mmio_pref represent the start and end addresses of resource, into which we must fit the current bridge window. The steps taken by pci_bus_distribute_available_resources(): - For io, mmio and mmio_pref, increase .start to align with the alignment of the current bridge window (otherwise the current bridge window may not fit within the available range). - For io, mmio and mmio_pref, adjust the current bridge window to the size after the above. - Count the number of hotplug bridges and normal bridges on this bus. - If the total number of bridges is one, give that bridge all of the resources and return. - If there are no hotplug bridges, return. - For io, mmio and mmio_pref, increase .start by the amount required for each bridge resource on the bus for non hotplug bridges, giving extra room to make up for alignment of those resources. - For io, mmio and mmio_pref, calculate the resource size per hotplug bridge which is available after the previous steps. - For io, mmio and mmio_pref, distribute the resources to each hotplug bridge, with the sizes calculated above. The motivation for fixing this is enabling devices that require greater than 1MB alignment. This fixes the case where the user hot-adds devices with BAR alignment >1MB and Linux fails to assign resources to it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581 Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-06 22:46:13 +07:00
io.start += io_per_hp;
mmio.start += mmio_per_hp;
mmio_pref.start += mmio_pref_per_hp;
}
}
static void pci_bridge_distribute_available_resources(struct pci_dev *bridge,
struct list_head *add_list)
{
struct resource available_io, available_mmio, available_mmio_pref;
if (!bridge->is_hotplug_bridge)
return;
/* Take the initial extra resources from the hotplug port */
available_io = bridge->resource[PCI_BRIDGE_RESOURCES + 0];
available_mmio = bridge->resource[PCI_BRIDGE_RESOURCES + 1];
available_mmio_pref = bridge->resource[PCI_BRIDGE_RESOURCES + 2];
pci_bus_distribute_available_resources(bridge->subordinate,
add_list, available_io,
available_mmio,
available_mmio_pref);
}
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
{
struct pci_bus *parent = bridge->subordinate;
/* List of resources that want additional resources */
LIST_HEAD(add_list);
int tried_times = 0;
LIST_HEAD(fail_head);
struct pci_dev_resource *fail_res;
int retval;
again:
__pci_bus_size_bridges(parent, &add_list);
/*
* Distribute remaining resources (if any) equally between hotplug
* bridges below. This makes it possible to extend the hierarchy
* later without running out of resources.
*/
pci_bridge_distribute_available_resources(bridge, &add_list);
__pci_bridge_assign_resources(bridge, &add_list, &fail_head);
BUG_ON(!list_empty(&add_list));
tried_times++;
if (list_empty(&fail_head))
goto enable_all;
if (tried_times >= 2) {
/* Still fail, don't need to try more */
free_list(&fail_head);
goto enable_all;
}
printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
tried_times + 1);
/*
* Try to release leaf bridge's resources that aren't big enough
* to contain child device resources.
*/
list_for_each_entry(fail_res, &fail_head, list)
pci_bus_release_bridge_resources(fail_res->dev->bus,
fail_res->flags & PCI_RES_TYPE_MASK,
whole_subtree);
/* Restore size and flags */
list_for_each_entry(fail_res, &fail_head, list) {
struct resource *res = fail_res->res;
PCI: Don't disable bridge BARs when assigning bus resources Some PCI bridges implement BARs in addition to bridge windows. For example, here's a PLX switch: 04:00.0 PCI bridge: PLX Technology, Inc. PEX 8724 24-Lane, 6-Port PCI Express Gen 3 (8 GT/s) Switch, 19 x 19mm FCBGA (rev ca) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 30, NUMA node 0 Memory at 90a00000 (32-bit, non-prefetchable) [size=256K] Bus: primary=04, secondary=05, subordinate=0a, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: 90000000-909fffff Prefetchable memory behind bridge: 0000380000800000-0000380000bfffff Previously, when the kernel assigned resource addresses (with the pci=realloc command line parameter, for example) it could clear the struct resource corresponding to the BAR. When this happened, lspci would report this BAR as "ignored": Region 0: Memory at <ignored> (32-bit, non-prefetchable) [size=256K] This is because the kernel reports a zero start address and zero flags in the corresponding sysfs resource file and in /proc/bus/pci/devices. Investigation with 'lspci -x', however, shows the BIOS-assigned address will still be programmed in the device's BAR registers. It's clearly a bug that the kernel lost track of the BAR value, but in most cases, this still won't result in a visible issue because nothing uses the memory, so nothing is affected. However, when an IOMMU is in use, it will not reserve this space in the IOVA because the kernel no longer thinks the range is valid. (See dmar_init_reserved_ranges() for the Intel implementation of this.) Without the proper reserved range, a DMA mapping may allocate an IOVA that matches a bridge BAR, which results in DMA accesses going to the BAR instead of the intended RAM. The problem was in pci_assign_unassigned_root_bus_resources(). When any resource from a bridge device fails to get assigned, the code set the resource's flags to zero. This makes sense for bridge windows, as they will be re-enabled later, but for regular BARs, it makes the kernel permanently lose track of the fact that they decode address space. Change pci_assign_unassigned_root_bus_resources() and pci_assign_unassigned_bridge_resources() so they only clear "res->flags" for bridge *windows*, not bridge BARs. Fixes: da7822e5ad71 ("PCI: update bridge resources to get more big ranges when allocating space (again)") Link: https://lore.kernel.org/r/20200108213208.4612-1-logang@deltatee.com [bhelgaas: commit log, check for pci_is_bridge()] Reported-by: Kit Chow <kchow@gigaio.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-09 04:32:08 +07:00
int idx;
res->start = fail_res->start;
res->end = fail_res->end;
res->flags = fail_res->flags;
PCI: Don't disable bridge BARs when assigning bus resources Some PCI bridges implement BARs in addition to bridge windows. For example, here's a PLX switch: 04:00.0 PCI bridge: PLX Technology, Inc. PEX 8724 24-Lane, 6-Port PCI Express Gen 3 (8 GT/s) Switch, 19 x 19mm FCBGA (rev ca) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 30, NUMA node 0 Memory at 90a00000 (32-bit, non-prefetchable) [size=256K] Bus: primary=04, secondary=05, subordinate=0a, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: 90000000-909fffff Prefetchable memory behind bridge: 0000380000800000-0000380000bfffff Previously, when the kernel assigned resource addresses (with the pci=realloc command line parameter, for example) it could clear the struct resource corresponding to the BAR. When this happened, lspci would report this BAR as "ignored": Region 0: Memory at <ignored> (32-bit, non-prefetchable) [size=256K] This is because the kernel reports a zero start address and zero flags in the corresponding sysfs resource file and in /proc/bus/pci/devices. Investigation with 'lspci -x', however, shows the BIOS-assigned address will still be programmed in the device's BAR registers. It's clearly a bug that the kernel lost track of the BAR value, but in most cases, this still won't result in a visible issue because nothing uses the memory, so nothing is affected. However, when an IOMMU is in use, it will not reserve this space in the IOVA because the kernel no longer thinks the range is valid. (See dmar_init_reserved_ranges() for the Intel implementation of this.) Without the proper reserved range, a DMA mapping may allocate an IOVA that matches a bridge BAR, which results in DMA accesses going to the BAR instead of the intended RAM. The problem was in pci_assign_unassigned_root_bus_resources(). When any resource from a bridge device fails to get assigned, the code set the resource's flags to zero. This makes sense for bridge windows, as they will be re-enabled later, but for regular BARs, it makes the kernel permanently lose track of the fact that they decode address space. Change pci_assign_unassigned_root_bus_resources() and pci_assign_unassigned_bridge_resources() so they only clear "res->flags" for bridge *windows*, not bridge BARs. Fixes: da7822e5ad71 ("PCI: update bridge resources to get more big ranges when allocating space (again)") Link: https://lore.kernel.org/r/20200108213208.4612-1-logang@deltatee.com [bhelgaas: commit log, check for pci_is_bridge()] Reported-by: Kit Chow <kchow@gigaio.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-09 04:32:08 +07:00
if (pci_is_bridge(fail_res->dev)) {
idx = res - &fail_res->dev->resource[0];
if (idx >= PCI_BRIDGE_RESOURCES &&
idx <= PCI_BRIDGE_RESOURCE_END)
res->flags = 0;
}
}
free_list(&fail_head);
goto again;
enable_all:
retval = pci_reenable_device(bridge);
if (retval)
pci_err(bridge, "Error reenabling bridge (%d)\n", retval);
pci_set_master(bridge);
}
EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
int pci_reassign_bridge_resources(struct pci_dev *bridge, unsigned long type)
{
struct pci_dev_resource *dev_res;
struct pci_dev *next;
LIST_HEAD(saved);
LIST_HEAD(added);
LIST_HEAD(failed);
unsigned int i;
int ret;
down_read(&pci_bus_sem);
/* Walk to the root hub, releasing bridge BARs when possible */
next = bridge;
do {
bridge = next;
for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCE_END;
i++) {
struct resource *res = &bridge->resource[i];
if ((res->flags ^ type) & PCI_RES_TYPE_MASK)
continue;
/* Ignore BARs which are still in use */
if (res->child)
continue;
ret = add_to_list(&saved, bridge, res, 0, 0);
if (ret)
goto cleanup;
pci_info(bridge, "BAR %d: releasing %pR\n",
i, res);
if (res->parent)
release_resource(res);
res->start = 0;
res->end = 0;
break;
}
if (i == PCI_BRIDGE_RESOURCE_END)
break;
next = bridge->bus ? bridge->bus->self : NULL;
} while (next);
if (list_empty(&saved)) {
up_read(&pci_bus_sem);
return -ENOENT;
}
__pci_bus_size_bridges(bridge->subordinate, &added);
__pci_bridge_assign_resources(bridge, &added, &failed);
BUG_ON(!list_empty(&added));
if (!list_empty(&failed)) {
ret = -ENOSPC;
goto cleanup;
}
list_for_each_entry(dev_res, &saved, list) {
/* Skip the bridge we just assigned resources for */
if (bridge == dev_res->dev)
continue;
bridge = dev_res->dev;
pci_setup_bridge(bridge->subordinate);
}
free_list(&saved);
up_read(&pci_bus_sem);
return 0;
cleanup:
/* Restore size and flags */
list_for_each_entry(dev_res, &failed, list) {
struct resource *res = dev_res->res;
res->start = dev_res->start;
res->end = dev_res->end;
res->flags = dev_res->flags;
}
free_list(&failed);
/* Revert to the old configuration */
list_for_each_entry(dev_res, &saved, list) {
struct resource *res = dev_res->res;
bridge = dev_res->dev;
i = res - bridge->resource;
res->start = dev_res->start;
res->end = dev_res->end;
res->flags = dev_res->flags;
pci_claim_resource(bridge, i);
pci_setup_bridge(bridge->subordinate);
}
free_list(&saved);
up_read(&pci_bus_sem);
return ret;
}
void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
{
struct pci_dev *dev;
/* List of resources that want additional resources */
LIST_HEAD(add_list);
down_read(&pci_bus_sem);
for_each_pci_bridge(dev, bus)
if (pci_has_subordinate(dev))
__pci_bus_size_bridges(dev->subordinate, &add_list);
up_read(&pci_bus_sem);
__pci_bus_assign_resources(bus, &add_list, NULL);
BUG_ON(!list_empty(&add_list));
}
EXPORT_SYMBOL_GPL(pci_assign_unassigned_bus_resources);