linux_dsm_epyc7002/drivers/media/video/saa7134/saa7134-dvb.c

1091 lines
31 KiB
C
Raw Normal View History

/*
*
* (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
*
* Extended 3 / 2005 by Hartmut Hackmann to support various
* cards with the tda10046 DVB-T channel decoder
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/suspend.h>
#include "saa7134-reg.h"
#include "saa7134.h"
#include <media/v4l2-common.h>
#include "dvb-pll.h"
#include "mt352.h"
#include "mt352_priv.h" /* FIXME */
#include "tda1004x.h"
#include "nxt200x.h"
#include "tda10086.h"
#include "tda826x.h"
#include "tda827x.h"
#include "isl6421.h"
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
static unsigned int antenna_pwr = 0;
module_param(antenna_pwr, int, 0444);
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
static int use_frontend = 0;
module_param(use_frontend, int, 0644);
MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
static int debug = 0;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off).");
#define dprintk(fmt, arg...) do { if (debug) \
printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0)
/* Print a warning */
#define wprintk(fmt, arg...) \
printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg)
/* ------------------------------------------------------------------
* mt352 based DVB-T cards
*/
static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
{
u32 ok;
if (!on) {
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
return 0;
}
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
udelay(10);
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28));
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
udelay(10);
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
udelay(10);
ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
dprintk("%s %s\n", __FUNCTION__, ok ? "on" : "off");
if (!ok)
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
return ok;
}
static int mt352_pinnacle_init(struct dvb_frontend* fe)
{
static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 };
static u8 reset [] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 };
static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 };
static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f };
static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d };
static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
struct saa7134_dev *dev= fe->dvb->priv;
dprintk("%s called\n", __FUNCTION__);
mt352_write(fe, clock_config, sizeof(clock_config));
udelay(200);
mt352_write(fe, reset, sizeof(reset));
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
mt352_write(fe, irq_cfg, sizeof(irq_cfg));
return 0;
}
static int mt352_aver777_init(struct dvb_frontend* fe)
{
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
static u8 reset [] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
mt352_write(fe, clock_config, sizeof(clock_config));
udelay(200);
mt352_write(fe, reset, sizeof(reset));
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
return 0;
}
static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
u8 off[] = { 0x00, 0xf1};
u8 on[] = { 0x00, 0x71};
struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
struct saa7134_dev *dev = fe->dvb->priv;
struct v4l2_frequency f;
/* set frequency (mt2050) */
f.tuner = 0;
f.type = V4L2_TUNER_DIGITAL_TV;
f.frequency = params->frequency / 1000 * 16 / 1000;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(&dev->i2c_adap, &msg, 1);
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
msg.buf = on;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(&dev->i2c_adap, &msg, 1);
pinnacle_antenna_pwr(dev, antenna_pwr);
/* mt352 setup */
return mt352_pinnacle_init(fe);
}
static struct mt352_config pinnacle_300i = {
.demod_address = 0x3c >> 1,
.adc_clock = 20333,
.if2 = 36150,
.no_tuner = 1,
.demod_init = mt352_pinnacle_init,
};
static struct mt352_config avermedia_777 = {
.demod_address = 0xf,
.demod_init = mt352_aver777_init,
};
/* ==================================================================
* tda1004x based DVB-T cards, helper functions
*/
static int philips_tda1004x_request_firmware(struct dvb_frontend *fe,
const struct firmware **fw, char *name)
{
struct saa7134_dev *dev = fe->dvb->priv;
return request_firmware(fw, name, &dev->pci->dev);
}
/* ------------------------------------------------------------------
* these tuners are tu1216, td1316(a)
*/
static int philips_tda6651_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct saa7134_dev *dev = fe->dvb->priv;
struct tda1004x_state *state = fe->demodulator_priv;
u8 addr = state->config->tuner_address;
u8 tuner_buf[4];
struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
sizeof(tuner_buf) };
int tuner_frequency = 0;
u8 band, cp, filter;
/* determine charge pump */
tuner_frequency = params->frequency + 36166000;
if (tuner_frequency < 87000000)
return -EINVAL;
else if (tuner_frequency < 130000000)
cp = 3;
else if (tuner_frequency < 160000000)
cp = 5;
else if (tuner_frequency < 200000000)
cp = 6;
else if (tuner_frequency < 290000000)
cp = 3;
else if (tuner_frequency < 420000000)
cp = 5;
else if (tuner_frequency < 480000000)
cp = 6;
else if (tuner_frequency < 620000000)
cp = 3;
else if (tuner_frequency < 830000000)
cp = 5;
else if (tuner_frequency < 895000000)
cp = 7;
else
return -EINVAL;
/* determine band */
if (params->frequency < 49000000)
return -EINVAL;
else if (params->frequency < 161000000)
band = 1;
else if (params->frequency < 444000000)
band = 2;
else if (params->frequency < 861000000)
band = 4;
else
return -EINVAL;
/* setup PLL filter */
switch (params->u.ofdm.bandwidth) {
case BANDWIDTH_6_MHZ:
filter = 0;
break;
case BANDWIDTH_7_MHZ:
filter = 0;
break;
case BANDWIDTH_8_MHZ:
filter = 1;
break;
default:
return -EINVAL;
}
/* calculate divisor
* ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
*/
tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
/* setup tuner buffer */
tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
tuner_buf[1] = tuner_frequency & 0xff;
tuner_buf[2] = 0xca;
tuner_buf[3] = (cp << 5) | (filter << 3) | band;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
wprintk("could not write to tuner at addr: 0x%02x\n",
addr << 1);
return -EIO;
}
msleep(1);
return 0;
}
static int philips_tu1216_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
struct tda1004x_state *state = fe->demodulator_priv;
u8 addr = state->config->tuner_address;
static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
/* setup PLL configuration */
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
return -EIO;
msleep(1);
return 0;
}
/* ------------------------------------------------------------------ */
static struct tda1004x_config philips_tu1216_60_config = {
.demod_address = 0x8,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_4M,
.agc_config = TDA10046_AGC_DEFAULT,
.if_freq = TDA10046_FREQ_3617,
.tuner_address = 0x60,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config philips_tu1216_61_config = {
.demod_address = 0x8,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_4M,
.agc_config = TDA10046_AGC_DEFAULT,
.if_freq = TDA10046_FREQ_3617,
.tuner_address = 0x61,
.request_firmware = philips_tda1004x_request_firmware
};
/* ------------------------------------------------------------------ */
static int philips_td1316_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
struct tda1004x_state *state = fe->demodulator_priv;
u8 addr = state->config->tuner_address;
static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab };
struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
/* setup PLL configuration */
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
return -EIO;
return 0;
}
static int philips_td1316_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
return philips_tda6651_pll_set(fe, params);
}
static int philips_td1316_tuner_sleep(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
struct tda1004x_state *state = fe->demodulator_priv;
u8 addr = state->config->tuner_address;
static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 };
struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
/* switch the tuner to analog mode */
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1)
return -EIO;
return 0;
}
/* ------------------------------------------------------------------ */
static int philips_europa_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
static u8 msg[] = { 0x00, 0x40};
struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
if (philips_td1316_tuner_init(fe))
return -EIO;
msleep(1);
if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
return -EIO;
return 0;
}
static int philips_europa_tuner_sleep(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
static u8 msg[] = { 0x00, 0x14 };
struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
if (philips_td1316_tuner_sleep(fe))
return -EIO;
/* switch the board to analog mode */
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
return 0;
}
static int philips_europa_demod_sleep(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
if (dev->original_demod_sleep)
dev->original_demod_sleep(fe);
fe->ops.i2c_gate_ctrl(fe, 1);
return 0;
}
static struct tda1004x_config philips_europa_config = {
.demod_address = 0x8,
.invert = 0,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_4M,
.agc_config = TDA10046_AGC_IFO_AUTO_POS,
.if_freq = TDA10046_FREQ_052,
.tuner_address = 0x61,
.request_firmware = philips_tda1004x_request_firmware
};
/* ------------------------------------------------------------------ */
static struct tda1004x_config medion_cardbus = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_IFO_AUTO_NEG,
.if_freq = TDA10046_FREQ_3613,
.tuner_address = 0x61,
.request_firmware = philips_tda1004x_request_firmware
};
/* ------------------------------------------------------------------
* tda 1004x based cards with philips silicon tuner
*/
static void philips_tda827x_lna_gain(struct dvb_frontend *fe, int high)
{
struct saa7134_dev *dev = fe->dvb->priv;
struct tda1004x_state *state = fe->demodulator_priv;
u8 addr = state->config->i2c_gate;
u8 config = state->config->tuner_config;
u8 GP00_CF[] = {0x20, 0x01};
u8 GP00_LEV[] = {0x22, 0x00};
struct i2c_msg msg = {.addr = addr,.flags = 0,.buf = GP00_CF, .len = 2};
if (config) {
if (high) {
dprintk("setting LNA to high gain\n");
} else {
dprintk("setting LNA to low gain\n");
}
}
switch (config) {
case 0: /* no LNA */
break;
case 1: /* switch is GPIO 0 of tda8290 */
case 2:
/* turn Vsync off */
saa7134_set_gpio(dev, 22, 0);
GP00_LEV[1] = high ? 0 : 1;
if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
wprintk("could not access tda8290 at addr: 0x%02x\n",
addr << 1);
return;
}
msg.buf = GP00_LEV;
if (config == 2)
GP00_LEV[1] = high ? 1 : 0;
i2c_transfer(&dev->i2c_adap, &msg, 1);
break;
case 3: /* switch with GPIO of saa713x */
saa7134_set_gpio(dev, 22, high);
break;
}
}
static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable)
{
struct tda1004x_state *state = fe->demodulator_priv;
u8 addr = state->config->i2c_gate;
static u8 tda8290_close[] = { 0x21, 0xc0};
static u8 tda8290_open[] = { 0x21, 0x80};
struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2};
if (enable) {
tda8290_msg.buf = tda8290_close;
} else {
tda8290_msg.buf = tda8290_open;
}
if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) {
struct saa7134_dev *dev = fe->dvb->priv;
wprintk("could not access tda8290 I2C gate\n");
return -EIO;
}
msleep(20);
return 0;
}
/* ------------------------------------------------------------------ */
static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
struct tda1004x_state *state = fe->demodulator_priv;
switch (state->config->antenna_switch) {
case 0: break;
case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
saa7134_set_gpio(dev, 21, 0);
break;
case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
saa7134_set_gpio(dev, 21, 1);
break;
}
return 0;
}
static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
struct tda1004x_state *state = fe->demodulator_priv;
switch (state->config->antenna_switch) {
case 0: break;
case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
saa7134_set_gpio(dev, 21, 1);
break;
case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
saa7134_set_gpio(dev, 21, 0);
break;
}
return 0;
}
static struct tda827x_config tda827x_cfg = {
.lna_gain = philips_tda827x_lna_gain,
.init = philips_tda827x_tuner_init,
.sleep = philips_tda827x_tuner_sleep
};
static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *tda_conf)
{
dev->dvb.frontend = dvb_attach(tda10046_attach, tda_conf, &dev->i2c_adap);
if (dev->dvb.frontend) {
if (tda_conf->i2c_gate)
dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
if (dvb_attach(tda827x_attach, dev->dvb.frontend, tda_conf->tuner_address,
&dev->i2c_adap,&tda827x_cfg) == NULL) {
wprintk("no tda827x tuner found at addr: %02x\n",
tda_conf->tuner_address);
}
}
}
/* ------------------------------------------------------------------ */
static struct tda1004x_config tda827x_lifeview_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP11_I,
.if_freq = TDA10046_FREQ_045,
.tuner_address = 0x60,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config philips_tiger_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP11_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.tuner_config = 0,
.antenna_switch= 1,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config cinergy_ht_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP01_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.tuner_config = 0,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config cinergy_ht_pci_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP01_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x60,
.tuner_config = 0,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config philips_tiger_s_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP01_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.tuner_config = 2,
.antenna_switch= 1,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config pinnacle_pctv_310i_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP11_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.tuner_config = 1,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config hauppauge_hvr_1110_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP11_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config asus_p7131_dual_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP11_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.tuner_config = 0,
.antenna_switch= 2,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config lifeview_trio_config = {
.demod_address = 0x09,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP00_I,
.if_freq = TDA10046_FREQ_045,
.tuner_address = 0x60,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config tevion_dvbt220rf_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP11_I,
.if_freq = TDA10046_FREQ_045,
.tuner_address = 0x60,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config md8800_dvbt_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP01_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x60,
.tuner_config = 0,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config asus_p7131_4871_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP01_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.tuner_config = 2,
.antenna_switch= 2,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config asus_p7131_hybrid_lna_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP11_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.tuner_config = 2,
.antenna_switch= 2,
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config kworld_dvb_t_210_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP11_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.tuner_config = 2,
.antenna_switch= 1,
.request_firmware = philips_tda1004x_request_firmware
};
/* ------------------------------------------------------------------
* special case: this card uses saa713x GPIO22 for the mode switch
*/
static int ads_duo_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
philips_tda827x_tuner_init(fe);
/* route TDA8275a AGC input to the channel decoder */
saa7134_set_gpio(dev, 22, 1);
return 0;
}
static int ads_duo_tuner_sleep(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
/* route TDA8275a AGC input to the analog IF chip*/
saa7134_set_gpio(dev, 22, 0);
philips_tda827x_tuner_sleep(fe);
return 0;
}
static struct tda827x_config ads_duo_cfg = {
.lna_gain = philips_tda827x_lna_gain,
.init = ads_duo_tuner_init,
.sleep = ads_duo_tuner_sleep
};
static struct tda1004x_config ads_tech_duo_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP00_I,
.if_freq = TDA10046_FREQ_045,
.tuner_address = 0x61,
.request_firmware = philips_tda1004x_request_firmware
};
/* ==================================================================
* tda10086 based DVB-S cards, helper functions
*/
static struct tda10086_config flydvbs = {
.demod_address = 0x0e,
.invert = 0,
};
/* ==================================================================
* nxt200x based ATSC cards, helper functions
*/
static struct nxt200x_config avertvhda180 = {
.demod_address = 0x0a,
};
static struct nxt200x_config kworldatsc110 = {
.demod_address = 0x0a,
};
/* ==================================================================
* Core code
*/
static int dvb_init(struct saa7134_dev *dev)
{
int ret;
/* init struct videobuf_dvb */
dev->ts.nr_bufs = 32;
dev->ts.nr_packets = 32*4;
dev->dvb.name = dev->name;
videobuf_queue_init(&dev->dvb.dvbq, &saa7134_ts_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_ALTERNATE,
sizeof(struct saa7134_buf),
dev);
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
dprintk("pinnacle 300i dvb setup\n");
dev->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dev->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
}
break;
case SAA7134_BOARD_AVERMEDIA_777:
case SAA7134_BOARD_AVERMEDIA_A16AR:
dprintk("avertv 777 dvb setup\n");
dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, DVB_PLL_PHILIPS_TD1316);
}
break;
case SAA7134_BOARD_MD7134:
dev->dvb.frontend = dvb_attach(tda10046_attach,
&medion_cardbus,
&dev->i2c_adap);
if (dev->dvb.frontend) {
V4L/DVB (5636): Integrate all users of the fmd1216 tuner with dvb-pll Enhance the dvb-pll definition of the fmd1216 tuner by adding an init sequence and a sleep sequence. The init sequence sets the AGC control register to 0xa0, selecting the fast time constant and 112 dBuV take-over point. This the recommended value for DVB-T operation. The sleep sequence sets bit P4 (which is believed to turn the analog demodulator on), turns off the tuning voltage, and sets the AGC control register to 0x60 (external AGC voltage, the recommended value for analog operation). The existing dvb-pll users in the cx88 driver, listed below, will gain these init and sleep sequences. CX88_BOARD_HAUPPAUGE_HVR1100 Hauppauge WinTV-HVR1100 DVB-T/Hybrid CX88_BOARD_HAUPPAUGE_HVR1100LP Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profi CX88_BOARD_WINFAST_DTV2000H WinFast DTV2000 H CX88_BOARD_HAUPPAUGE_HVR3000 Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DV CX88_BOARD_HAUPPAUGE_HVR1300 Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encod This non-dvb-pll user in the cx88 driver should only gain the sleep sequence, as it already had an equivalent init sequence. The non-dvb-pll code for this user is removed. X88_BOARD_DNTV_LIVE_DVB_T_PRO digitalnow DNTV Live! DVB-T Pro In these saa7134 driver, these non-dvb-pll users are converted to use dvb-pll: SAA7134_BOARD_MD7134 Medion 7134 SAA7134_BOARD_ASUS_EUROPA2_HYBRID Asus Europa2 OEM The saa7134 functions philips_fmd1216_tuner_init(), philips_fmd1216_tuner_sleep(), and philips_fmd1216_tuner_set_params() are deleted and the dvb-pll versions are used. This should result in equivalent sleep, init, and tuning sequences being sent to the tuner. For the cxusb driver, only one board is effected: USB_PID_MEDION_MD95700 Medion MD95700 This board used dvb_usb_tuner_init_i2c() and dvb_usb_tuner_set_params_i2c() for init and tuning, respectively. These functions are effectively the same as the dvb-pll versions. They call a tuner pass control function defined at the dvb-usb level, but this does not matter, as this card does not have a tuner pass control function (only the dib3000mb does). This board will gain the sleep sequence, while init and tuning should be unchanged. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-09 04:05:16 +07:00
dvb_attach(dvb_pll_attach, dev->dvb.frontend, medion_cardbus.tuner_address,
&dev->i2c_adap, DVB_PLL_FMD1216ME);
}
break;
case SAA7134_BOARD_PHILIPS_TOUGH:
dev->dvb.frontend = dvb_attach(tda10046_attach,
&philips_tu1216_60_config,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
}
break;
case SAA7134_BOARD_FLYDVBTDUO:
case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
configure_tda827x_fe(dev, &tda827x_lifeview_config);
break;
case SAA7134_BOARD_PHILIPS_EUROPA:
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
dev->dvb.frontend = dvb_attach(tda10046_attach,
&philips_europa_config,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
}
break;
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
dev->dvb.frontend = dvb_attach(tda10046_attach,
&philips_tu1216_61_config,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
}
break;
case SAA7134_BOARD_KWORLD_DVBT_210:
configure_tda827x_fe(dev, &kworld_dvb_t_210_config);
break;
case SAA7134_BOARD_PHILIPS_TIGER:
configure_tda827x_fe(dev, &philips_tiger_config);
break;
case SAA7134_BOARD_PINNACLE_PCTV_310i:
configure_tda827x_fe(dev, &pinnacle_pctv_310i_config);
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
configure_tda827x_fe(dev, &hauppauge_hvr_1110_config);
break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
configure_tda827x_fe(dev, &asus_p7131_dual_config);
break;
case SAA7134_BOARD_FLYDVBT_LR301:
configure_tda827x_fe(dev, &tda827x_lifeview_config);
break;
case SAA7134_BOARD_FLYDVB_TRIO:
if(! use_frontend) { //terrestrial
configure_tda827x_fe(dev, &lifeview_trio_config);
} else { //satellite
dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
if (dev->dvb.frontend) {
if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63,
&dev->i2c_adap, 0) == NULL) {
wprintk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__);
}
if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap,
0x08, 0, 0) == NULL) {
wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__);
}
}
}
break;
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
dev->dvb.frontend = dvb_attach(tda10046_attach,
&ads_tech_duo_config,
&dev->i2c_adap);
if (dev->dvb.frontend) {
if (dvb_attach(tda827x_attach,dev->dvb.frontend,
ads_tech_duo_config.tuner_address,
&dev->i2c_adap,&ads_duo_cfg) == NULL) {
wprintk("no tda827x tuner found at addr: %02x\n",
ads_tech_duo_config.tuner_address);
}
}
break;
case SAA7134_BOARD_TEVION_DVBT_220RF:
configure_tda827x_fe(dev, &tevion_dvbt220rf_config);
break;
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
configure_tda827x_fe(dev, &md8800_dvbt_config);
break;
case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, DVB_PLL_TDHU2);
}
break;
case SAA7134_BOARD_KWORLD_ATSC110:
dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, DVB_PLL_TUV1236D);
}
break;
case SAA7134_BOARD_FLYDVBS_LR300:
dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
&dev->i2c_adap);
if (dev->dvb.frontend) {
if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60,
&dev->i2c_adap, 0) == NULL) {
wprintk("%s: No tda826x found!\n", __FUNCTION__);
}
if (dvb_attach(isl6421_attach, dev->dvb.frontend,
&dev->i2c_adap, 0x08, 0, 0) == NULL) {
wprintk("%s: No ISL6421 found!\n", __FUNCTION__);
}
}
break;
case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
dev->dvb.frontend = tda10046_attach(&medion_cardbus,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
V4L/DVB (5636): Integrate all users of the fmd1216 tuner with dvb-pll Enhance the dvb-pll definition of the fmd1216 tuner by adding an init sequence and a sleep sequence. The init sequence sets the AGC control register to 0xa0, selecting the fast time constant and 112 dBuV take-over point. This the recommended value for DVB-T operation. The sleep sequence sets bit P4 (which is believed to turn the analog demodulator on), turns off the tuning voltage, and sets the AGC control register to 0x60 (external AGC voltage, the recommended value for analog operation). The existing dvb-pll users in the cx88 driver, listed below, will gain these init and sleep sequences. CX88_BOARD_HAUPPAUGE_HVR1100 Hauppauge WinTV-HVR1100 DVB-T/Hybrid CX88_BOARD_HAUPPAUGE_HVR1100LP Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profi CX88_BOARD_WINFAST_DTV2000H WinFast DTV2000 H CX88_BOARD_HAUPPAUGE_HVR3000 Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DV CX88_BOARD_HAUPPAUGE_HVR1300 Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encod This non-dvb-pll user in the cx88 driver should only gain the sleep sequence, as it already had an equivalent init sequence. The non-dvb-pll code for this user is removed. X88_BOARD_DNTV_LIVE_DVB_T_PRO digitalnow DNTV Live! DVB-T Pro In these saa7134 driver, these non-dvb-pll users are converted to use dvb-pll: SAA7134_BOARD_MD7134 Medion 7134 SAA7134_BOARD_ASUS_EUROPA2_HYBRID Asus Europa2 OEM The saa7134 functions philips_fmd1216_tuner_init(), philips_fmd1216_tuner_sleep(), and philips_fmd1216_tuner_set_params() are deleted and the dvb-pll versions are used. This should result in equivalent sleep, init, and tuning sequences being sent to the tuner. For the cxusb driver, only one board is effected: USB_PID_MEDION_MD95700 Medion MD95700 This board used dvb_usb_tuner_init_i2c() and dvb_usb_tuner_set_params_i2c() for init and tuning, respectively. These functions are effectively the same as the dvb-pll versions. They call a tuner pass control function defined at the dvb-usb level, but this does not matter, as this card does not have a tuner pass control function (only the dib3000mb does). This board will gain the sleep sequence, while init and tuning should be unchanged. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-09 04:05:16 +07:00
dvb_attach(dvb_pll_attach, dev->dvb.frontend, medion_cardbus.tuner_address,
&dev->i2c_adap, DVB_PLL_FMD1216ME);
}
break;
case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
dev->dvb.frontend = dvb_attach(tda10046_attach,
&philips_europa_config,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dev->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
}
break;
case SAA7134_BOARD_CINERGY_HT_PCMCIA:
configure_tda827x_fe(dev, &cinergy_ht_config);
break;
case SAA7134_BOARD_CINERGY_HT_PCI:
configure_tda827x_fe(dev, &cinergy_ht_pci_config);
break;
case SAA7134_BOARD_PHILIPS_TIGER_S:
configure_tda827x_fe(dev, &philips_tiger_s_config);
break;
case SAA7134_BOARD_ASUS_P7131_4871:
configure_tda827x_fe(dev, &asus_p7131_4871_config);
break;
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config);
break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
}
if (NULL == dev->dvb.frontend) {
printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
return -1;
}
/* register everything else */
ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev);
/* this sequence is necessary to make the tda1004x load its firmware
* and to enter analog mode of hybrid boards
*/
if (!ret) {
if (dev->dvb.frontend->ops.init)
dev->dvb.frontend->ops.init(dev->dvb.frontend);
if (dev->dvb.frontend->ops.sleep)
dev->dvb.frontend->ops.sleep(dev->dvb.frontend);
if (dev->dvb.frontend->ops.tuner_ops.sleep)
dev->dvb.frontend->ops.tuner_ops.sleep(dev->dvb.frontend);
}
return ret;
}
static int dvb_fini(struct saa7134_dev *dev)
{
static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
/* otherwise we don't detect the tuner on next insmod */
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
break;
};
videobuf_dvb_unregister(&dev->dvb);
return 0;
}
static struct saa7134_mpeg_ops dvb_ops = {
.type = SAA7134_MPEG_DVB,
.init = dvb_init,
.fini = dvb_fini,
};
static int __init dvb_register(void)
{
return saa7134_ts_register(&dvb_ops);
}
static void __exit dvb_unregister(void)
{
saa7134_ts_unregister(&dvb_ops);
}
module_init(dvb_register);
module_exit(dvb_unregister);
/* ------------------------------------------------------------------ */
/*
* Local variables:
* c-basic-offset: 8
* End:
*/