License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2005-04-17 05:20:36 +07:00
|
|
|
/*
|
|
|
|
* linux/fs/proc/base.c
|
|
|
|
*
|
|
|
|
* Copyright (C) 1991, 1992 Linus Torvalds
|
|
|
|
*
|
|
|
|
* proc base directory handling functions
|
|
|
|
*
|
|
|
|
* 1999, Al Viro. Rewritten. Now it covers the whole per-process part.
|
|
|
|
* Instead of using magical inumbers to determine the kind of object
|
|
|
|
* we allocate and fill in-core inodes upon lookup. They don't even
|
|
|
|
* go into icache. We cache the reference to task_struct upon lookup too.
|
|
|
|
* Eventually it should become a filesystem in its own. We don't use the
|
|
|
|
* rest of procfs anymore.
|
2005-09-04 05:55:10 +07:00
|
|
|
*
|
|
|
|
*
|
|
|
|
* Changelog:
|
|
|
|
* 17-Jan-2005
|
|
|
|
* Allan Bezerra
|
|
|
|
* Bruna Moreira <bruna.moreira@indt.org.br>
|
|
|
|
* Edjard Mota <edjard.mota@indt.org.br>
|
|
|
|
* Ilias Biris <ilias.biris@indt.org.br>
|
|
|
|
* Mauricio Lin <mauricio.lin@indt.org.br>
|
|
|
|
*
|
|
|
|
* Embedded Linux Lab - 10LE Instituto Nokia de Tecnologia - INdT
|
|
|
|
*
|
|
|
|
* A new process specific entry (smaps) included in /proc. It shows the
|
|
|
|
* size of rss for each memory area. The maps entry lacks information
|
|
|
|
* about physical memory size (rss) for each mapped file, i.e.,
|
|
|
|
* rss information for executables and library files.
|
|
|
|
* This additional information is useful for any tools that need to know
|
|
|
|
* about physical memory consumption for a process specific library.
|
|
|
|
*
|
|
|
|
* Changelog:
|
|
|
|
* 21-Feb-2005
|
|
|
|
* Embedded Linux Lab - 10LE Instituto Nokia de Tecnologia - INdT
|
|
|
|
* Pud inclusion in the page table walking.
|
|
|
|
*
|
|
|
|
* ChangeLog:
|
|
|
|
* 10-Mar-2005
|
|
|
|
* 10LE Instituto Nokia de Tecnologia - INdT:
|
|
|
|
* A better way to walks through the page table as suggested by Hugh Dickins.
|
|
|
|
*
|
|
|
|
* Simo Piiroinen <simo.piiroinen@nokia.com>:
|
|
|
|
* Smaps information related to shared, private, clean and dirty pages.
|
|
|
|
*
|
|
|
|
* Paul Mundt <paul.mundt@nokia.com>:
|
|
|
|
* Overall revision about smaps.
|
2005-04-17 05:20:36 +07:00
|
|
|
*/
|
|
|
|
|
2016-12-25 02:46:01 +07:00
|
|
|
#include <linux/uaccess.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/time.h>
|
|
|
|
#include <linux/proc_fs.h>
|
|
|
|
#include <linux/stat.h>
|
2008-07-27 22:29:15 +07:00
|
|
|
#include <linux/task_io_accounting_ops.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
#include <linux/init.h>
|
2006-01-12 03:17:46 +07:00
|
|
|
#include <linux/capability.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
#include <linux/file.h>
|
2008-04-24 18:44:08 +07:00
|
|
|
#include <linux/fdtable.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
#include <linux/namei.h>
|
2006-12-08 17:37:56 +07:00
|
|
|
#include <linux/mnt_namespace.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
#include <linux/mm.h>
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
#include <linux/swap.h>
|
2005-09-10 03:04:14 +07:00
|
|
|
#include <linux/rcupdate.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
#include <linux/kallsyms.h>
|
2008-11-10 15:26:08 +07:00
|
|
|
#include <linux/stacktrace.h>
|
2007-10-19 13:40:37 +07:00
|
|
|
#include <linux/resource.h>
|
2007-05-08 14:26:04 +07:00
|
|
|
#include <linux/module.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
#include <linux/mount.h>
|
|
|
|
#include <linux/security.h>
|
|
|
|
#include <linux/ptrace.h>
|
2008-07-26 09:45:49 +07:00
|
|
|
#include <linux/tracehook.h>
|
2013-02-28 08:03:16 +07:00
|
|
|
#include <linux/printk.h>
|
2018-02-07 06:37:24 +07:00
|
|
|
#include <linux/cache.h>
|
2007-10-19 13:39:35 +07:00
|
|
|
#include <linux/cgroup.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
#include <linux/cpuset.h>
|
|
|
|
#include <linux/audit.h>
|
2005-11-08 05:15:49 +07:00
|
|
|
#include <linux/poll.h>
|
2006-10-02 16:18:08 +07:00
|
|
|
#include <linux/nsproxy.h>
|
2006-10-20 13:28:32 +07:00
|
|
|
#include <linux/oom.h>
|
2007-07-19 15:48:28 +07:00
|
|
|
#include <linux/elf.h>
|
2007-10-19 13:40:03 +07:00
|
|
|
#include <linux/pid_namespace.h>
|
2011-11-17 15:11:58 +07:00
|
|
|
#include <linux/user_namespace.h>
|
2009-03-30 06:50:06 +07:00
|
|
|
#include <linux/fs_struct.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
|
|
|
#include <linux/slab.h>
|
2017-02-09 00:51:29 +07:00
|
|
|
#include <linux/sched/autogroup.h>
|
2017-02-09 00:51:29 +07:00
|
|
|
#include <linux/sched/mm.h>
|
2017-02-09 00:51:30 +07:00
|
|
|
#include <linux/sched/coredump.h>
|
2017-02-09 00:51:35 +07:00
|
|
|
#include <linux/sched/debug.h>
|
2017-02-05 18:07:04 +07:00
|
|
|
#include <linux/sched/stat.h>
|
2012-01-11 06:11:23 +07:00
|
|
|
#include <linux/flex_array.h>
|
2013-03-11 16:12:45 +07:00
|
|
|
#include <linux/posix-timers.h>
|
2012-01-11 06:08:09 +07:00
|
|
|
#include <trace/events/oom.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
#include "internal.h"
|
2012-08-23 17:43:24 +07:00
|
|
|
#include "fd.h"
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2018-02-07 06:36:59 +07:00
|
|
|
#include "../../lib/kstrtox.h"
|
|
|
|
|
2006-06-26 14:25:46 +07:00
|
|
|
/* NOTE:
|
|
|
|
* Implementing inode permission operations in /proc is almost
|
|
|
|
* certainly an error. Permission checks need to happen during
|
|
|
|
* each system call not at open time. The reason is that most of
|
|
|
|
* what we wish to check for permissions in /proc varies at runtime.
|
|
|
|
*
|
|
|
|
* The classic example of a problem is opening file descriptors
|
|
|
|
* in /proc for a task before it execs a suid executable.
|
|
|
|
*/
|
|
|
|
|
2018-02-07 06:37:24 +07:00
|
|
|
static u8 nlink_tid __ro_after_init;
|
|
|
|
static u8 nlink_tgid __ro_after_init;
|
2016-12-13 07:45:32 +07:00
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
struct pid_entry {
|
2014-08-09 04:21:33 +07:00
|
|
|
const char *name;
|
2016-12-13 07:45:08 +07:00
|
|
|
unsigned int len;
|
2011-07-24 14:36:29 +07:00
|
|
|
umode_t mode;
|
2007-02-12 15:55:40 +07:00
|
|
|
const struct inode_operations *iop;
|
2007-02-12 15:55:34 +07:00
|
|
|
const struct file_operations *fop;
|
2006-10-02 16:17:07 +07:00
|
|
|
union proc_op op;
|
2005-04-17 05:20:36 +07:00
|
|
|
};
|
|
|
|
|
2006-10-02 16:18:49 +07:00
|
|
|
#define NOD(NAME, MODE, IOP, FOP, OP) { \
|
2006-10-02 16:17:07 +07:00
|
|
|
.name = (NAME), \
|
2007-05-08 14:26:15 +07:00
|
|
|
.len = sizeof(NAME) - 1, \
|
2006-10-02 16:17:07 +07:00
|
|
|
.mode = MODE, \
|
|
|
|
.iop = IOP, \
|
|
|
|
.fop = FOP, \
|
|
|
|
.op = OP, \
|
|
|
|
}
|
|
|
|
|
2008-11-10 05:32:52 +07:00
|
|
|
#define DIR(NAME, MODE, iops, fops) \
|
|
|
|
NOD(NAME, (S_IFDIR|(MODE)), &iops, &fops, {} )
|
|
|
|
#define LNK(NAME, get_link) \
|
2006-10-02 16:18:49 +07:00
|
|
|
NOD(NAME, (S_IFLNK|S_IRWXUGO), \
|
2006-10-02 16:17:07 +07:00
|
|
|
&proc_pid_link_inode_operations, NULL, \
|
2008-11-10 05:32:52 +07:00
|
|
|
{ .proc_get_link = get_link } )
|
|
|
|
#define REG(NAME, MODE, fops) \
|
|
|
|
NOD(NAME, (S_IFREG|(MODE)), NULL, &fops, {})
|
|
|
|
#define ONE(NAME, MODE, show) \
|
2008-02-08 19:18:30 +07:00
|
|
|
NOD(NAME, (S_IFREG|(MODE)), \
|
|
|
|
NULL, &proc_single_file_operations, \
|
2008-11-10 05:32:52 +07:00
|
|
|
{ .proc_show = show } )
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2008-06-06 12:46:53 +07:00
|
|
|
/*
|
|
|
|
* Count the number of hardlinks for the pid_entry table, excluding the .
|
|
|
|
* and .. links.
|
|
|
|
*/
|
2016-12-13 07:45:32 +07:00
|
|
|
static unsigned int __init pid_entry_nlink(const struct pid_entry *entries,
|
2008-06-06 12:46:53 +07:00
|
|
|
unsigned int n)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
unsigned int count;
|
|
|
|
|
2016-12-13 07:45:32 +07:00
|
|
|
count = 2;
|
2008-06-06 12:46:53 +07:00
|
|
|
for (i = 0; i < n; ++i) {
|
|
|
|
if (S_ISDIR(entries[i].mode))
|
|
|
|
++count;
|
|
|
|
}
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
2010-08-10 16:41:36 +07:00
|
|
|
static int get_task_root(struct task_struct *task, struct path *root)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2009-03-29 06:21:27 +07:00
|
|
|
int result = -ENOENT;
|
|
|
|
|
2005-09-07 05:18:22 +07:00
|
|
|
task_lock(task);
|
2010-08-10 16:41:36 +07:00
|
|
|
if (task->fs) {
|
|
|
|
get_fs_root(task->fs, root);
|
2009-03-29 06:21:27 +07:00
|
|
|
result = 0;
|
|
|
|
}
|
2005-09-07 05:18:22 +07:00
|
|
|
task_unlock(task);
|
2009-03-29 06:21:27 +07:00
|
|
|
return result;
|
2005-09-07 05:18:22 +07:00
|
|
|
}
|
|
|
|
|
2012-01-11 06:11:20 +07:00
|
|
|
static int proc_cwd_link(struct dentry *dentry, struct path *path)
|
2005-09-07 05:18:22 +07:00
|
|
|
{
|
2015-03-18 05:25:59 +07:00
|
|
|
struct task_struct *task = get_proc_task(d_inode(dentry));
|
2005-09-07 05:18:22 +07:00
|
|
|
int result = -ENOENT;
|
2006-06-26 14:25:55 +07:00
|
|
|
|
|
|
|
if (task) {
|
2010-08-10 16:41:36 +07:00
|
|
|
task_lock(task);
|
|
|
|
if (task->fs) {
|
|
|
|
get_fs_pwd(task->fs, path);
|
|
|
|
result = 0;
|
|
|
|
}
|
|
|
|
task_unlock(task);
|
2006-06-26 14:25:55 +07:00
|
|
|
put_task_struct(task);
|
|
|
|
}
|
2005-04-17 05:20:36 +07:00
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
2012-01-11 06:11:20 +07:00
|
|
|
static int proc_root_link(struct dentry *dentry, struct path *path)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2015-03-18 05:25:59 +07:00
|
|
|
struct task_struct *task = get_proc_task(d_inode(dentry));
|
2005-04-17 05:20:36 +07:00
|
|
|
int result = -ENOENT;
|
2006-06-26 14:25:55 +07:00
|
|
|
|
|
|
|
if (task) {
|
2010-08-10 16:41:36 +07:00
|
|
|
result = get_task_root(task, path);
|
2006-06-26 14:25:55 +07:00
|
|
|
put_task_struct(task);
|
|
|
|
}
|
2005-04-17 05:20:36 +07:00
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
2018-05-18 03:04:17 +07:00
|
|
|
static ssize_t get_mm_cmdline(struct mm_struct *mm, char __user *buf,
|
2018-05-18 05:17:33 +07:00
|
|
|
size_t count, loff_t *ppos)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2015-06-26 05:00:54 +07:00
|
|
|
unsigned long arg_start, arg_end, env_start, env_end;
|
2018-05-18 05:17:33 +07:00
|
|
|
unsigned long pos, len;
|
|
|
|
char *page;
|
2015-06-26 05:00:54 +07:00
|
|
|
|
|
|
|
/* Check if process spawned far enough to have cmdline. */
|
2018-05-18 03:04:17 +07:00
|
|
|
if (!mm->env_end)
|
|
|
|
return 0;
|
2015-06-26 05:00:54 +07:00
|
|
|
|
mm: introduce arg_lock to protect arg_start|end and env_start|end in mm_struct
mmap_sem is on the hot path of kernel, and it very contended, but it is
abused too. It is used to protect arg_start|end and evn_start|end when
reading /proc/$PID/cmdline and /proc/$PID/environ, but it doesn't make
sense since those proc files just expect to read 4 values atomically and
not related to VM, they could be set to arbitrary values by C/R.
And, the mmap_sem contention may cause unexpected issue like below:
INFO: task ps:14018 blocked for more than 120 seconds.
Tainted: G E 4.9.79-009.ali3000.alios7.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
ps D 0 14018 1 0x00000004
Call Trace:
schedule+0x36/0x80
rwsem_down_read_failed+0xf0/0x150
call_rwsem_down_read_failed+0x18/0x30
down_read+0x20/0x40
proc_pid_cmdline_read+0xd9/0x4e0
__vfs_read+0x37/0x150
vfs_read+0x96/0x130
SyS_read+0x55/0xc0
entry_SYSCALL_64_fastpath+0x1a/0xc5
Both Alexey Dobriyan and Michal Hocko suggested to use dedicated lock
for them to mitigate the abuse of mmap_sem.
So, introduce a new spinlock in mm_struct to protect the concurrent
access to arg_start|end, env_start|end and others, as well as replace
write map_sem to read to protect the race condition between prctl and
sys_brk which might break check_data_rlimit(), and makes prctl more
friendly to other VM operations.
This patch just eliminates the abuse of mmap_sem, but it can't resolve
the above hung task warning completely since the later
access_remote_vm() call needs acquire mmap_sem. The mmap_sem
scalability issue will be solved in the future.
[yang.shi@linux.alibaba.com: add comment about mmap_sem and arg_lock]
Link: http://lkml.kernel.org/r/1524077799-80690-1-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1523730291-109696-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 07:05:28 +07:00
|
|
|
spin_lock(&mm->arg_lock);
|
2015-06-26 05:00:54 +07:00
|
|
|
arg_start = mm->arg_start;
|
|
|
|
arg_end = mm->arg_end;
|
|
|
|
env_start = mm->env_start;
|
|
|
|
env_end = mm->env_end;
|
mm: introduce arg_lock to protect arg_start|end and env_start|end in mm_struct
mmap_sem is on the hot path of kernel, and it very contended, but it is
abused too. It is used to protect arg_start|end and evn_start|end when
reading /proc/$PID/cmdline and /proc/$PID/environ, but it doesn't make
sense since those proc files just expect to read 4 values atomically and
not related to VM, they could be set to arbitrary values by C/R.
And, the mmap_sem contention may cause unexpected issue like below:
INFO: task ps:14018 blocked for more than 120 seconds.
Tainted: G E 4.9.79-009.ali3000.alios7.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
ps D 0 14018 1 0x00000004
Call Trace:
schedule+0x36/0x80
rwsem_down_read_failed+0xf0/0x150
call_rwsem_down_read_failed+0x18/0x30
down_read+0x20/0x40
proc_pid_cmdline_read+0xd9/0x4e0
__vfs_read+0x37/0x150
vfs_read+0x96/0x130
SyS_read+0x55/0xc0
entry_SYSCALL_64_fastpath+0x1a/0xc5
Both Alexey Dobriyan and Michal Hocko suggested to use dedicated lock
for them to mitigate the abuse of mmap_sem.
So, introduce a new spinlock in mm_struct to protect the concurrent
access to arg_start|end, env_start|end and others, as well as replace
write map_sem to read to protect the race condition between prctl and
sys_brk which might break check_data_rlimit(), and makes prctl more
friendly to other VM operations.
This patch just eliminates the abuse of mmap_sem, but it can't resolve
the above hung task warning completely since the later
access_remote_vm() call needs acquire mmap_sem. The mmap_sem
scalability issue will be solved in the future.
[yang.shi@linux.alibaba.com: add comment about mmap_sem and arg_lock]
Link: http://lkml.kernel.org/r/1524077799-80690-1-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1523730291-109696-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 07:05:28 +07:00
|
|
|
spin_unlock(&mm->arg_lock);
|
2015-06-26 05:00:54 +07:00
|
|
|
|
2018-05-18 05:17:33 +07:00
|
|
|
if (arg_start >= arg_end)
|
|
|
|
return 0;
|
2018-06-08 07:09:59 +07:00
|
|
|
|
2014-08-09 04:21:41 +07:00
|
|
|
/*
|
2018-05-18 05:17:33 +07:00
|
|
|
* We have traditionally allowed the user to re-write
|
|
|
|
* the argument strings and overflow the end result
|
|
|
|
* into the environment section. But only do that if
|
|
|
|
* the environment area is contiguous to the arguments.
|
2014-08-09 04:21:41 +07:00
|
|
|
*/
|
2018-05-18 05:17:33 +07:00
|
|
|
if (env_start != arg_end || env_start >= env_end)
|
|
|
|
env_start = env_end = arg_end;
|
|
|
|
|
2018-06-20 07:47:20 +07:00
|
|
|
/* .. and limit it to a maximum of one page of slop */
|
|
|
|
if (env_end >= arg_end + PAGE_SIZE)
|
|
|
|
env_end = arg_end + PAGE_SIZE - 1;
|
|
|
|
|
2018-05-18 05:17:33 +07:00
|
|
|
/* We're not going to care if "*ppos" has high bits set */
|
|
|
|
pos = arg_start + *ppos;
|
2018-06-08 07:10:02 +07:00
|
|
|
|
2018-05-18 05:17:33 +07:00
|
|
|
/* .. but we do check the result is in the proper range */
|
|
|
|
if (pos < arg_start || pos >= env_end)
|
|
|
|
return 0;
|
2017-02-25 06:00:20 +07:00
|
|
|
|
2018-05-18 05:17:33 +07:00
|
|
|
/* .. and we never go past env_end */
|
|
|
|
if (env_end - pos < count)
|
|
|
|
count = env_end - pos;
|
|
|
|
|
|
|
|
page = (char *)__get_free_page(GFP_KERNEL);
|
|
|
|
if (!page)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
len = 0;
|
|
|
|
while (count) {
|
|
|
|
int got;
|
|
|
|
size_t size = min_t(size_t, PAGE_SIZE, count);
|
2018-06-20 07:47:20 +07:00
|
|
|
long offset;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Are we already starting past the official end?
|
|
|
|
* We always include the last byte that is *supposed*
|
|
|
|
* to be NUL
|
|
|
|
*/
|
|
|
|
offset = (pos >= arg_end) ? pos - arg_end + 1 : 0;
|
2018-05-18 05:17:33 +07:00
|
|
|
|
2018-06-20 07:47:20 +07:00
|
|
|
got = access_remote_vm(mm, pos - offset, page, size + offset, FOLL_ANON);
|
|
|
|
if (got <= offset)
|
2018-05-18 05:17:33 +07:00
|
|
|
break;
|
2018-06-20 07:47:20 +07:00
|
|
|
got -= offset;
|
2018-05-18 05:17:33 +07:00
|
|
|
|
|
|
|
/* Don't walk past a NUL character once you hit arg_end */
|
|
|
|
if (pos + got >= arg_end) {
|
|
|
|
int n = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If we started before 'arg_end' but ended up
|
|
|
|
* at or after it, we start the NUL character
|
|
|
|
* check at arg_end-1 (where we expect the normal
|
|
|
|
* EOF to be).
|
|
|
|
*
|
|
|
|
* NOTE! This is smaller than 'got', because
|
|
|
|
* pos + got >= arg_end
|
|
|
|
*/
|
|
|
|
if (pos < arg_end)
|
|
|
|
n = arg_end - pos - 1;
|
|
|
|
|
|
|
|
/* Cut off at first NUL after 'n' */
|
2018-06-20 07:47:20 +07:00
|
|
|
got = n + strnlen(page+n, offset+got-n);
|
|
|
|
if (got < offset)
|
2018-05-18 05:17:33 +07:00
|
|
|
break;
|
2018-06-20 07:47:20 +07:00
|
|
|
got -= offset;
|
|
|
|
|
|
|
|
/* Include the NUL if it existed */
|
|
|
|
if (got < size)
|
|
|
|
got++;
|
2015-06-26 05:00:54 +07:00
|
|
|
}
|
2018-05-18 05:17:33 +07:00
|
|
|
|
2018-06-20 07:47:20 +07:00
|
|
|
got -= copy_to_user(buf, page+offset, got);
|
2018-05-18 05:17:33 +07:00
|
|
|
if (unlikely(!got)) {
|
|
|
|
if (!len)
|
|
|
|
len = -EFAULT;
|
|
|
|
break;
|
2015-06-26 05:00:54 +07:00
|
|
|
}
|
2018-05-18 05:17:33 +07:00
|
|
|
pos += got;
|
|
|
|
buf += got;
|
|
|
|
len += got;
|
|
|
|
count -= got;
|
2015-06-26 05:00:54 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
free_page((unsigned long)page);
|
2018-05-18 05:17:33 +07:00
|
|
|
return len;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2018-05-18 03:04:17 +07:00
|
|
|
static ssize_t get_task_cmdline(struct task_struct *tsk, char __user *buf,
|
|
|
|
size_t count, loff_t *pos)
|
|
|
|
{
|
|
|
|
struct mm_struct *mm;
|
|
|
|
ssize_t ret;
|
|
|
|
|
|
|
|
mm = get_task_mm(tsk);
|
|
|
|
if (!mm)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
ret = get_mm_cmdline(mm, buf, count, pos);
|
2015-06-26 05:00:54 +07:00
|
|
|
mmput(mm);
|
2018-05-18 03:04:17 +07:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t proc_pid_cmdline_read(struct file *file, char __user *buf,
|
|
|
|
size_t count, loff_t *pos)
|
|
|
|
{
|
|
|
|
struct task_struct *tsk;
|
|
|
|
ssize_t ret;
|
|
|
|
|
|
|
|
BUG_ON(*pos < 0);
|
|
|
|
|
|
|
|
tsk = get_proc_task(file_inode(file));
|
|
|
|
if (!tsk)
|
|
|
|
return -ESRCH;
|
|
|
|
ret = get_task_cmdline(tsk, buf, count, pos);
|
|
|
|
put_task_struct(tsk);
|
|
|
|
if (ret > 0)
|
|
|
|
*pos += ret;
|
|
|
|
return ret;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2015-06-26 05:00:54 +07:00
|
|
|
static const struct file_operations proc_pid_cmdline_ops = {
|
|
|
|
.read = proc_pid_cmdline_read,
|
|
|
|
.llseek = generic_file_llseek,
|
|
|
|
};
|
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
#ifdef CONFIG_KALLSYMS
|
|
|
|
/*
|
|
|
|
* Provides a wchan file via kallsyms in a proper one-value-per-file format.
|
|
|
|
* Returns the resolved symbol. If that fails, simply return the address.
|
|
|
|
*/
|
2014-08-09 04:21:44 +07:00
|
|
|
static int proc_pid_wchan(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2007-05-08 14:28:41 +07:00
|
|
|
unsigned long wchan;
|
2007-07-17 18:03:51 +07:00
|
|
|
char symname[KSYM_NAME_LEN];
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2018-04-11 06:31:30 +07:00
|
|
|
if (!ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS))
|
|
|
|
goto print0;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2018-04-11 06:31:30 +07:00
|
|
|
wchan = get_wchan(task);
|
|
|
|
if (wchan && !lookup_symbol_name(wchan, symname)) {
|
2018-04-11 06:31:34 +07:00
|
|
|
seq_puts(m, symname);
|
2018-04-11 06:31:30 +07:00
|
|
|
return 0;
|
|
|
|
}
|
2015-04-16 06:18:17 +07:00
|
|
|
|
2018-04-11 06:31:30 +07:00
|
|
|
print0:
|
|
|
|
seq_putc(m, '0');
|
2015-04-16 06:18:17 +07:00
|
|
|
return 0;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
#endif /* CONFIG_KALLSYMS */
|
|
|
|
|
2011-03-24 02:52:50 +07:00
|
|
|
static int lock_trace(struct task_struct *task)
|
|
|
|
{
|
|
|
|
int err = mutex_lock_killable(&task->signal->cred_guard_mutex);
|
|
|
|
if (err)
|
|
|
|
return err;
|
ptrace: use fsuid, fsgid, effective creds for fs access checks
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.
To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.
The problem was that when a privileged task had temporarily dropped its
privileges, e.g. by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.
While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.
In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:
/proc/$pid/stat - uses the check for determining whether pointers
should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
directories that contain files with lax permissions, e.g. in
this scenario:
lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
drwx------ root root /root
drwxr-xr-x root root /root/foobar
-rw-r--r-- root root /root/foobar/secret
Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 06:00:04 +07:00
|
|
|
if (!ptrace_may_access(task, PTRACE_MODE_ATTACH_FSCREDS)) {
|
2011-03-24 02:52:50 +07:00
|
|
|
mutex_unlock(&task->signal->cred_guard_mutex);
|
|
|
|
return -EPERM;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void unlock_trace(struct task_struct *task)
|
|
|
|
{
|
|
|
|
mutex_unlock(&task->signal->cred_guard_mutex);
|
|
|
|
}
|
|
|
|
|
2008-11-10 15:26:08 +07:00
|
|
|
#ifdef CONFIG_STACKTRACE
|
|
|
|
|
|
|
|
#define MAX_STACK_TRACE_DEPTH 64
|
|
|
|
|
|
|
|
static int proc_pid_stack(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
|
|
|
{
|
|
|
|
struct stack_trace trace;
|
|
|
|
unsigned long *entries;
|
2011-03-24 02:52:50 +07:00
|
|
|
int err;
|
2008-11-10 15:26:08 +07:00
|
|
|
|
2018-10-06 05:51:58 +07:00
|
|
|
/*
|
|
|
|
* The ability to racily run the kernel stack unwinder on a running task
|
|
|
|
* and then observe the unwinder output is scary; while it is useful for
|
|
|
|
* debugging kernel issues, it can also allow an attacker to leak kernel
|
|
|
|
* stack contents.
|
|
|
|
* Doing this in a manner that is at least safe from races would require
|
|
|
|
* some work to ensure that the remote task can not be scheduled; and
|
|
|
|
* even then, this would still expose the unwinder as local attack
|
|
|
|
* surface.
|
|
|
|
* Therefore, this interface is restricted to root.
|
|
|
|
*/
|
|
|
|
if (!file_ns_capable(m->file, &init_user_ns, CAP_SYS_ADMIN))
|
|
|
|
return -EACCES;
|
|
|
|
|
treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:
kmalloc(a * b, gfp)
with:
kmalloc_array(a * b, gfp)
as well as handling cases of:
kmalloc(a * b * c, gfp)
with:
kmalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kmalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kmalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kmalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kmalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kmalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kmalloc
+ kmalloc_array
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kmalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kmalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kmalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kmalloc(sizeof(THING) * C2, ...)
|
kmalloc(sizeof(TYPE) * C2, ...)
|
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * E2
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 03:55:00 +07:00
|
|
|
entries = kmalloc_array(MAX_STACK_TRACE_DEPTH, sizeof(*entries),
|
|
|
|
GFP_KERNEL);
|
2008-11-10 15:26:08 +07:00
|
|
|
if (!entries)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
trace.nr_entries = 0;
|
|
|
|
trace.max_entries = MAX_STACK_TRACE_DEPTH;
|
|
|
|
trace.entries = entries;
|
|
|
|
trace.skip = 0;
|
|
|
|
|
2011-03-24 02:52:50 +07:00
|
|
|
err = lock_trace(task);
|
|
|
|
if (!err) {
|
2018-06-08 07:10:17 +07:00
|
|
|
unsigned int i;
|
|
|
|
|
2011-03-24 02:52:50 +07:00
|
|
|
save_stack_trace_tsk(task, &trace);
|
|
|
|
|
|
|
|
for (i = 0; i < trace.nr_entries; i++) {
|
2017-11-28 07:45:56 +07:00
|
|
|
seq_printf(m, "[<0>] %pB\n", (void *)entries[i]);
|
2011-03-24 02:52:50 +07:00
|
|
|
}
|
|
|
|
unlock_trace(task);
|
2008-11-10 15:26:08 +07:00
|
|
|
}
|
|
|
|
kfree(entries);
|
|
|
|
|
2011-03-24 02:52:50 +07:00
|
|
|
return err;
|
2008-11-10 15:26:08 +07:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2015-06-30 16:06:03 +07:00
|
|
|
#ifdef CONFIG_SCHED_INFO
|
2005-04-17 05:20:36 +07:00
|
|
|
/*
|
|
|
|
* Provides /proc/PID/schedstat
|
|
|
|
*/
|
2014-08-09 04:21:46 +07:00
|
|
|
static int proc_pid_schedstat(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2015-06-30 16:06:03 +07:00
|
|
|
if (unlikely(!sched_info_on()))
|
|
|
|
seq_printf(m, "0 0 0\n");
|
|
|
|
else
|
|
|
|
seq_printf(m, "%llu %llu %lu\n",
|
2015-04-16 06:18:17 +07:00
|
|
|
(unsigned long long)task->se.sum_exec_runtime,
|
|
|
|
(unsigned long long)task->sched_info.run_delay,
|
|
|
|
task->sched_info.pcount);
|
|
|
|
|
|
|
|
return 0;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2008-01-26 03:08:34 +07:00
|
|
|
#ifdef CONFIG_LATENCYTOP
|
|
|
|
static int lstats_show_proc(struct seq_file *m, void *v)
|
|
|
|
{
|
|
|
|
int i;
|
2008-02-21 07:53:29 +07:00
|
|
|
struct inode *inode = m->private;
|
|
|
|
struct task_struct *task = get_proc_task(inode);
|
2008-01-26 03:08:34 +07:00
|
|
|
|
2008-02-21 07:53:29 +07:00
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
|
|
|
seq_puts(m, "Latency Top version : v0.1\n");
|
2018-08-22 11:54:34 +07:00
|
|
|
for (i = 0; i < LT_SAVECOUNT; i++) {
|
2011-01-13 08:00:30 +07:00
|
|
|
struct latency_record *lr = &task->latency_record[i];
|
|
|
|
if (lr->backtrace[0]) {
|
2008-01-26 03:08:34 +07:00
|
|
|
int q;
|
2011-01-13 08:00:30 +07:00
|
|
|
seq_printf(m, "%i %li %li",
|
|
|
|
lr->count, lr->time, lr->max);
|
2008-01-26 03:08:34 +07:00
|
|
|
for (q = 0; q < LT_BACKTRACEDEPTH; q++) {
|
2011-01-13 08:00:30 +07:00
|
|
|
unsigned long bt = lr->backtrace[q];
|
|
|
|
if (!bt)
|
2008-01-26 03:08:34 +07:00
|
|
|
break;
|
2011-01-13 08:00:30 +07:00
|
|
|
if (bt == ULONG_MAX)
|
2008-01-26 03:08:34 +07:00
|
|
|
break;
|
2011-01-13 08:00:30 +07:00
|
|
|
seq_printf(m, " %ps", (void *)bt);
|
2008-01-26 03:08:34 +07:00
|
|
|
}
|
2011-01-13 08:00:32 +07:00
|
|
|
seq_putc(m, '\n');
|
2008-01-26 03:08:34 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
}
|
2008-02-21 07:53:29 +07:00
|
|
|
put_task_struct(task);
|
2008-01-26 03:08:34 +07:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int lstats_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
2008-02-21 07:53:29 +07:00
|
|
|
return single_open(file, lstats_show_proc, inode);
|
2008-02-15 01:27:00 +07:00
|
|
|
}
|
|
|
|
|
2008-01-26 03:08:34 +07:00
|
|
|
static ssize_t lstats_write(struct file *file, const char __user *buf,
|
|
|
|
size_t count, loff_t *offs)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct task_struct *task = get_proc_task(file_inode(file));
|
2008-01-26 03:08:34 +07:00
|
|
|
|
2008-02-21 07:53:29 +07:00
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
2008-01-26 03:08:34 +07:00
|
|
|
clear_all_latency_tracing(task);
|
2008-02-21 07:53:29 +07:00
|
|
|
put_task_struct(task);
|
2008-01-26 03:08:34 +07:00
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_lstats_operations = {
|
|
|
|
.open = lstats_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.write = lstats_write,
|
|
|
|
.llseek = seq_lseek,
|
2008-02-21 07:53:29 +07:00
|
|
|
.release = single_release,
|
2008-01-26 03:08:34 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
2014-08-09 04:21:48 +07:00
|
|
|
static int proc_oom_score(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2012-05-30 05:06:47 +07:00
|
|
|
unsigned long totalpages = totalram_pages + total_swap_pages;
|
2010-04-01 20:13:57 +07:00
|
|
|
unsigned long points = 0;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2016-08-03 04:03:19 +07:00
|
|
|
points = oom_badness(task, NULL, NULL, totalpages) *
|
|
|
|
1000 / totalpages;
|
2015-04-16 06:18:17 +07:00
|
|
|
seq_printf(m, "%lu\n", points);
|
|
|
|
|
|
|
|
return 0;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2007-10-19 13:40:37 +07:00
|
|
|
struct limit_names {
|
2014-08-09 04:21:33 +07:00
|
|
|
const char *name;
|
|
|
|
const char *unit;
|
2007-10-19 13:40:37 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct limit_names lnames[RLIM_NLIMITS] = {
|
2009-09-23 06:45:32 +07:00
|
|
|
[RLIMIT_CPU] = {"Max cpu time", "seconds"},
|
2007-10-19 13:40:37 +07:00
|
|
|
[RLIMIT_FSIZE] = {"Max file size", "bytes"},
|
|
|
|
[RLIMIT_DATA] = {"Max data size", "bytes"},
|
|
|
|
[RLIMIT_STACK] = {"Max stack size", "bytes"},
|
|
|
|
[RLIMIT_CORE] = {"Max core file size", "bytes"},
|
|
|
|
[RLIMIT_RSS] = {"Max resident set", "bytes"},
|
|
|
|
[RLIMIT_NPROC] = {"Max processes", "processes"},
|
|
|
|
[RLIMIT_NOFILE] = {"Max open files", "files"},
|
|
|
|
[RLIMIT_MEMLOCK] = {"Max locked memory", "bytes"},
|
|
|
|
[RLIMIT_AS] = {"Max address space", "bytes"},
|
|
|
|
[RLIMIT_LOCKS] = {"Max file locks", "locks"},
|
|
|
|
[RLIMIT_SIGPENDING] = {"Max pending signals", "signals"},
|
|
|
|
[RLIMIT_MSGQUEUE] = {"Max msgqueue size", "bytes"},
|
|
|
|
[RLIMIT_NICE] = {"Max nice priority", NULL},
|
|
|
|
[RLIMIT_RTPRIO] = {"Max realtime priority", NULL},
|
2008-02-24 06:23:52 +07:00
|
|
|
[RLIMIT_RTTIME] = {"Max realtime timeout", "us"},
|
2007-10-19 13:40:37 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* Display limits for a process */
|
2014-08-09 04:21:37 +07:00
|
|
|
static int proc_pid_limits(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
2007-10-19 13:40:37 +07:00
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
struct rlimit rlim[RLIM_NLIMITS];
|
|
|
|
|
2008-10-05 03:51:15 +07:00
|
|
|
if (!lock_task_sighand(task, &flags))
|
2007-10-19 13:40:37 +07:00
|
|
|
return 0;
|
|
|
|
memcpy(rlim, task->signal->rlim, sizeof(struct rlimit) * RLIM_NLIMITS);
|
|
|
|
unlock_task_sighand(task, &flags);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* print the file header
|
|
|
|
*/
|
2014-08-09 04:21:37 +07:00
|
|
|
seq_printf(m, "%-25s %-20s %-20s %-10s\n",
|
2015-04-16 06:18:17 +07:00
|
|
|
"Limit", "Soft Limit", "Hard Limit", "Units");
|
2007-10-19 13:40:37 +07:00
|
|
|
|
|
|
|
for (i = 0; i < RLIM_NLIMITS; i++) {
|
|
|
|
if (rlim[i].rlim_cur == RLIM_INFINITY)
|
2014-08-09 04:21:37 +07:00
|
|
|
seq_printf(m, "%-25s %-20s ",
|
2015-04-16 06:18:17 +07:00
|
|
|
lnames[i].name, "unlimited");
|
2007-10-19 13:40:37 +07:00
|
|
|
else
|
2014-08-09 04:21:37 +07:00
|
|
|
seq_printf(m, "%-25s %-20lu ",
|
2015-04-16 06:18:17 +07:00
|
|
|
lnames[i].name, rlim[i].rlim_cur);
|
2007-10-19 13:40:37 +07:00
|
|
|
|
|
|
|
if (rlim[i].rlim_max == RLIM_INFINITY)
|
2014-08-09 04:21:37 +07:00
|
|
|
seq_printf(m, "%-20s ", "unlimited");
|
2007-10-19 13:40:37 +07:00
|
|
|
else
|
2014-08-09 04:21:37 +07:00
|
|
|
seq_printf(m, "%-20lu ", rlim[i].rlim_max);
|
2007-10-19 13:40:37 +07:00
|
|
|
|
|
|
|
if (lnames[i].unit)
|
2014-08-09 04:21:37 +07:00
|
|
|
seq_printf(m, "%-10s\n", lnames[i].unit);
|
2007-10-19 13:40:37 +07:00
|
|
|
else
|
2014-08-09 04:21:37 +07:00
|
|
|
seq_putc(m, '\n');
|
2007-10-19 13:40:37 +07:00
|
|
|
}
|
|
|
|
|
2014-08-09 04:21:37 +07:00
|
|
|
return 0;
|
2007-10-19 13:40:37 +07:00
|
|
|
}
|
|
|
|
|
2008-07-26 09:46:00 +07:00
|
|
|
#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
|
2014-08-09 04:21:39 +07:00
|
|
|
static int proc_pid_syscall(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
2008-07-26 09:46:00 +07:00
|
|
|
{
|
|
|
|
long nr;
|
|
|
|
unsigned long args[6], sp, pc;
|
2015-04-16 06:18:17 +07:00
|
|
|
int res;
|
|
|
|
|
|
|
|
res = lock_trace(task);
|
2011-03-24 02:52:50 +07:00
|
|
|
if (res)
|
|
|
|
return res;
|
2008-07-26 09:46:00 +07:00
|
|
|
|
|
|
|
if (task_current_syscall(task, &nr, args, 6, &sp, &pc))
|
2014-08-09 04:21:39 +07:00
|
|
|
seq_puts(m, "running\n");
|
2011-03-24 02:52:50 +07:00
|
|
|
else if (nr < 0)
|
2014-08-09 04:21:39 +07:00
|
|
|
seq_printf(m, "%ld 0x%lx 0x%lx\n", nr, sp, pc);
|
2011-03-24 02:52:50 +07:00
|
|
|
else
|
2014-08-09 04:21:39 +07:00
|
|
|
seq_printf(m,
|
2008-07-26 09:46:00 +07:00
|
|
|
"%ld 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n",
|
|
|
|
nr,
|
|
|
|
args[0], args[1], args[2], args[3], args[4], args[5],
|
|
|
|
sp, pc);
|
2011-03-24 02:52:50 +07:00
|
|
|
unlock_trace(task);
|
2015-04-16 06:18:17 +07:00
|
|
|
|
|
|
|
return 0;
|
2008-07-26 09:46:00 +07:00
|
|
|
}
|
|
|
|
#endif /* CONFIG_HAVE_ARCH_TRACEHOOK */
|
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
/************************************************************************/
|
|
|
|
/* Here the fs part begins */
|
|
|
|
/************************************************************************/
|
|
|
|
|
|
|
|
/* permission checks */
|
2006-06-26 14:25:58 +07:00
|
|
|
static int proc_fd_access_allowed(struct inode *inode)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2006-06-26 14:25:58 +07:00
|
|
|
struct task_struct *task;
|
|
|
|
int allowed = 0;
|
2006-06-26 14:25:59 +07:00
|
|
|
/* Allow access to a task's file descriptors if it is us or we
|
|
|
|
* may use ptrace attach to the process and find out that
|
|
|
|
* information.
|
2006-06-26 14:25:58 +07:00
|
|
|
*/
|
|
|
|
task = get_proc_task(inode);
|
2006-06-26 14:25:59 +07:00
|
|
|
if (task) {
|
ptrace: use fsuid, fsgid, effective creds for fs access checks
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.
To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.
The problem was that when a privileged task had temporarily dropped its
privileges, e.g. by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.
While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.
In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:
/proc/$pid/stat - uses the check for determining whether pointers
should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
directories that contain files with lax permissions, e.g. in
this scenario:
lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
drwx------ root root /root
drwxr-xr-x root root /root/foobar
-rw-r--r-- root root /root/foobar/secret
Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 06:00:04 +07:00
|
|
|
allowed = ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS);
|
2006-06-26 14:25:58 +07:00
|
|
|
put_task_struct(task);
|
2006-06-26 14:25:59 +07:00
|
|
|
}
|
2006-06-26 14:25:58 +07:00
|
|
|
return allowed;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2010-03-08 07:41:34 +07:00
|
|
|
int proc_setattr(struct dentry *dentry, struct iattr *attr)
|
2006-07-16 02:26:45 +07:00
|
|
|
{
|
|
|
|
int error;
|
2015-03-18 05:25:59 +07:00
|
|
|
struct inode *inode = d_inode(dentry);
|
2006-07-16 02:26:45 +07:00
|
|
|
|
|
|
|
if (attr->ia_valid & ATTR_MODE)
|
|
|
|
return -EPERM;
|
|
|
|
|
2016-05-26 21:55:18 +07:00
|
|
|
error = setattr_prepare(dentry, attr);
|
2010-06-04 16:30:02 +07:00
|
|
|
if (error)
|
|
|
|
return error;
|
|
|
|
|
|
|
|
setattr_copy(inode, attr);
|
|
|
|
mark_inode_dirty(inode);
|
|
|
|
return 0;
|
2006-07-16 02:26:45 +07:00
|
|
|
}
|
|
|
|
|
procfs: add hidepid= and gid= mount options
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:11:31 +07:00
|
|
|
/*
|
|
|
|
* May current process learn task's sched/cmdline info (for hide_pid_min=1)
|
|
|
|
* or euid/egid (for hide_pid_min=2)?
|
|
|
|
*/
|
|
|
|
static bool has_pid_permissions(struct pid_namespace *pid,
|
|
|
|
struct task_struct *task,
|
|
|
|
int hide_pid_min)
|
|
|
|
{
|
|
|
|
if (pid->hide_pid < hide_pid_min)
|
|
|
|
return true;
|
|
|
|
if (in_group_p(pid->pid_gid))
|
|
|
|
return true;
|
ptrace: use fsuid, fsgid, effective creds for fs access checks
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.
To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.
The problem was that when a privileged task had temporarily dropped its
privileges, e.g. by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.
While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.
In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:
/proc/$pid/stat - uses the check for determining whether pointers
should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
directories that contain files with lax permissions, e.g. in
this scenario:
lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
drwx------ root root /root
drwxr-xr-x root root /root/foobar
-rw-r--r-- root root /root/foobar/secret
Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 06:00:04 +07:00
|
|
|
return ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS);
|
procfs: add hidepid= and gid= mount options
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:11:31 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int proc_pid_permission(struct inode *inode, int mask)
|
|
|
|
{
|
2018-05-16 12:19:01 +07:00
|
|
|
struct pid_namespace *pid = proc_pid_ns(inode);
|
procfs: add hidepid= and gid= mount options
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:11:31 +07:00
|
|
|
struct task_struct *task;
|
|
|
|
bool has_perms;
|
|
|
|
|
|
|
|
task = get_proc_task(inode);
|
2012-01-13 08:17:08 +07:00
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
2017-02-25 06:00:23 +07:00
|
|
|
has_perms = has_pid_permissions(pid, task, HIDEPID_NO_ACCESS);
|
procfs: add hidepid= and gid= mount options
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:11:31 +07:00
|
|
|
put_task_struct(task);
|
|
|
|
|
|
|
|
if (!has_perms) {
|
2017-02-25 06:00:23 +07:00
|
|
|
if (pid->hide_pid == HIDEPID_INVISIBLE) {
|
procfs: add hidepid= and gid= mount options
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:11:31 +07:00
|
|
|
/*
|
|
|
|
* Let's make getdents(), stat(), and open()
|
|
|
|
* consistent with each other. If a process
|
|
|
|
* may not stat() a file, it shouldn't be seen
|
|
|
|
* in procfs at all.
|
|
|
|
*/
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
return -EPERM;
|
|
|
|
}
|
|
|
|
return generic_permission(inode, mask);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
2007-02-12 15:55:40 +07:00
|
|
|
static const struct inode_operations proc_def_inode_operations = {
|
2006-07-16 02:26:45 +07:00
|
|
|
.setattr = proc_setattr,
|
|
|
|
};
|
|
|
|
|
2008-02-08 19:18:30 +07:00
|
|
|
static int proc_single_show(struct seq_file *m, void *v)
|
|
|
|
{
|
|
|
|
struct inode *inode = m->private;
|
2018-05-16 12:19:01 +07:00
|
|
|
struct pid_namespace *ns = proc_pid_ns(inode);
|
|
|
|
struct pid *pid = proc_pid(inode);
|
2008-02-08 19:18:30 +07:00
|
|
|
struct task_struct *task;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
task = get_pid_task(pid, PIDTYPE_PID);
|
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
|
|
|
|
|
|
|
ret = PROC_I(inode)->op.proc_show(m, ns, pid, task);
|
|
|
|
|
|
|
|
put_task_struct(task);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int proc_single_open(struct inode *inode, struct file *filp)
|
|
|
|
{
|
2011-01-13 08:00:34 +07:00
|
|
|
return single_open(filp, proc_single_show, inode);
|
2008-02-08 19:18:30 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_single_file_operations = {
|
|
|
|
.open = proc_single_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = single_release,
|
|
|
|
};
|
|
|
|
|
2014-10-10 05:25:24 +07:00
|
|
|
|
|
|
|
struct mm_struct *proc_mem_open(struct inode *inode, unsigned int mode)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2014-10-10 05:25:24 +07:00
|
|
|
struct task_struct *task = get_proc_task(inode);
|
|
|
|
struct mm_struct *mm = ERR_PTR(-ESRCH);
|
2012-01-18 06:21:19 +07:00
|
|
|
|
2014-10-10 05:25:24 +07:00
|
|
|
if (task) {
|
ptrace: use fsuid, fsgid, effective creds for fs access checks
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.
To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.
The problem was that when a privileged task had temporarily dropped its
privileges, e.g. by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.
While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.
In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:
/proc/$pid/stat - uses the check for determining whether pointers
should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
directories that contain files with lax permissions, e.g. in
this scenario:
lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
drwx------ root root /root
drwxr-xr-x root root /root/foobar
-rw-r--r-- root root /root/foobar/secret
Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 06:00:04 +07:00
|
|
|
mm = mm_access(task, mode | PTRACE_MODE_FSCREDS);
|
2014-10-10 05:25:24 +07:00
|
|
|
put_task_struct(task);
|
2012-01-18 06:21:19 +07:00
|
|
|
|
2014-10-10 05:25:24 +07:00
|
|
|
if (!IS_ERR_OR_NULL(mm)) {
|
|
|
|
/* ensure this mm_struct can't be freed */
|
2017-02-28 05:30:07 +07:00
|
|
|
mmgrab(mm);
|
2014-10-10 05:25:24 +07:00
|
|
|
/* but do not pin its memory */
|
|
|
|
mmput(mm);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return mm;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __mem_open(struct inode *inode, struct file *file, unsigned int mode)
|
|
|
|
{
|
|
|
|
struct mm_struct *mm = proc_mem_open(inode, mode);
|
2012-01-18 06:21:19 +07:00
|
|
|
|
|
|
|
if (IS_ERR(mm))
|
|
|
|
return PTR_ERR(mm);
|
|
|
|
|
|
|
|
file->private_data = mm;
|
2005-04-17 05:20:36 +07:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-06-01 06:26:17 +07:00
|
|
|
static int mem_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
2012-07-31 04:42:28 +07:00
|
|
|
int ret = __mem_open(inode, file, PTRACE_MODE_ATTACH);
|
|
|
|
|
|
|
|
/* OK to pass negative loff_t, we can catch out-of-range */
|
|
|
|
file->f_mode |= FMODE_UNSIGNED_OFFSET;
|
|
|
|
|
|
|
|
return ret;
|
2012-06-01 06:26:17 +07:00
|
|
|
}
|
|
|
|
|
2012-01-31 23:14:54 +07:00
|
|
|
static ssize_t mem_rw(struct file *file, char __user *buf,
|
|
|
|
size_t count, loff_t *ppos, int write)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2012-01-18 06:21:19 +07:00
|
|
|
struct mm_struct *mm = file->private_data;
|
2012-01-31 23:14:54 +07:00
|
|
|
unsigned long addr = *ppos;
|
|
|
|
ssize_t copied;
|
2005-04-17 05:20:36 +07:00
|
|
|
char *page;
|
2016-10-25 09:00:44 +07:00
|
|
|
unsigned int flags;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2012-01-18 06:21:19 +07:00
|
|
|
if (!mm)
|
|
|
|
return 0;
|
2006-06-26 14:25:55 +07:00
|
|
|
|
2017-09-14 06:28:29 +07:00
|
|
|
page = (char *)__get_free_page(GFP_KERNEL);
|
2011-05-27 06:25:52 +07:00
|
|
|
if (!page)
|
2012-01-18 06:21:19 +07:00
|
|
|
return -ENOMEM;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2006-09-29 16:01:02 +07:00
|
|
|
copied = 0;
|
2017-02-28 05:30:13 +07:00
|
|
|
if (!mmget_not_zero(mm))
|
2012-01-31 23:15:11 +07:00
|
|
|
goto free;
|
|
|
|
|
"Yes, people use FOLL_FORCE ;)"
This effectively reverts commit 8ee74a91ac30 ("proc: try to remove use
of FOLL_FORCE entirely")
It turns out that people do depend on FOLL_FORCE for the /proc/<pid>/mem
case, and we're talking not just debuggers. Talking to the affected people, the use-cases are:
Keno Fischer:
"We used these semantics as a hardening mechanism in the julia JIT. By
opening /proc/self/mem and using these semantics, we could avoid
needing RWX pages, or a dual mapping approach. We do have fallbacks to
these other methods (though getting EIO here actually causes an assert
in released versions - we'll updated that to make sure to take the
fall back in that case).
Nevertheless the /proc/self/mem approach was our favored approach
because it a) Required an attacker to be able to execute syscalls
which is a taller order than getting memory write and b) didn't double
the virtual address space requirements (as a dual mapping approach
would).
I think in general this feature is very useful for anybody who needs
to precisely control the execution of some other process. Various
debuggers (gdb/lldb/rr) certainly fall into that category, but there's
another class of such processes (wine, various emulators) which may
want to do that kind of thing.
Now, I suspect most of these will have the other process under ptrace
control, so maybe allowing (same_mm || ptraced) would be ok, but at
least for the sandbox/remote-jit use case, it would be perfectly
reasonable to not have the jit server be a ptracer"
Robert O'Callahan:
"We write to readonly code and data mappings via /proc/.../mem in lots
of different situations, particularly when we're adjusting program
state during replay to match the recorded execution.
Like Julia, we can add workarounds, but they could be expensive."
so not only do people use FOLL_FORCE for both reads and writes, but they
use it for both the local mm and remote mm.
With these comments in mind, we likely also cannot add the "are we
actively ptracing" check either, so this keeps the new code organization
and does not do a real revert that would add back the original comment
about "Maybe we should limit FOLL_FORCE to actual ptrace users?"
Reported-by: Keno Fischer <keno@juliacomputing.com>
Reported-by: Robert O'Callahan <robert@ocallahan.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-31 02:38:59 +07:00
|
|
|
flags = FOLL_FORCE | (write ? FOLL_WRITE : 0);
|
2016-10-13 07:20:19 +07:00
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
while (count > 0) {
|
2012-01-31 23:14:54 +07:00
|
|
|
int this_len = min_t(int, count, PAGE_SIZE);
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2012-01-31 23:14:54 +07:00
|
|
|
if (write && copy_from_user(page, buf, this_len)) {
|
2005-04-17 05:20:36 +07:00
|
|
|
copied = -EFAULT;
|
|
|
|
break;
|
|
|
|
}
|
2012-01-31 23:14:54 +07:00
|
|
|
|
2016-10-13 07:20:19 +07:00
|
|
|
this_len = access_remote_vm(mm, addr, page, this_len, flags);
|
2012-01-31 23:14:54 +07:00
|
|
|
if (!this_len) {
|
2005-04-17 05:20:36 +07:00
|
|
|
if (!copied)
|
|
|
|
copied = -EIO;
|
|
|
|
break;
|
|
|
|
}
|
2012-01-31 23:14:54 +07:00
|
|
|
|
|
|
|
if (!write && copy_to_user(buf, page, this_len)) {
|
|
|
|
copied = -EFAULT;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
buf += this_len;
|
|
|
|
addr += this_len;
|
|
|
|
copied += this_len;
|
|
|
|
count -= this_len;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
2012-01-31 23:14:54 +07:00
|
|
|
*ppos = addr;
|
2011-05-27 06:25:52 +07:00
|
|
|
|
2012-01-31 23:15:11 +07:00
|
|
|
mmput(mm);
|
|
|
|
free:
|
2011-05-27 06:25:52 +07:00
|
|
|
free_page((unsigned long) page);
|
2005-04-17 05:20:36 +07:00
|
|
|
return copied;
|
|
|
|
}
|
|
|
|
|
2012-01-31 23:14:54 +07:00
|
|
|
static ssize_t mem_read(struct file *file, char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
return mem_rw(file, buf, count, ppos, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t mem_write(struct file *file, const char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
return mem_rw(file, (char __user*)buf, count, ppos, 1);
|
|
|
|
}
|
|
|
|
|
2008-02-05 13:29:04 +07:00
|
|
|
loff_t mem_lseek(struct file *file, loff_t offset, int orig)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
|
|
|
switch (orig) {
|
|
|
|
case 0:
|
|
|
|
file->f_pos = offset;
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
file->f_pos += offset;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
force_successful_syscall_return();
|
|
|
|
return file->f_pos;
|
|
|
|
}
|
|
|
|
|
2012-01-18 06:21:19 +07:00
|
|
|
static int mem_release(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct mm_struct *mm = file->private_data;
|
2012-01-31 23:14:38 +07:00
|
|
|
if (mm)
|
2012-01-31 23:15:11 +07:00
|
|
|
mmdrop(mm);
|
2012-01-18 06:21:19 +07:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2007-02-12 15:55:34 +07:00
|
|
|
static const struct file_operations proc_mem_operations = {
|
2005-04-17 05:20:36 +07:00
|
|
|
.llseek = mem_lseek,
|
|
|
|
.read = mem_read,
|
|
|
|
.write = mem_write,
|
|
|
|
.open = mem_open,
|
2012-01-18 06:21:19 +07:00
|
|
|
.release = mem_release,
|
2005-04-17 05:20:36 +07:00
|
|
|
};
|
|
|
|
|
2012-06-01 06:26:17 +07:00
|
|
|
static int environ_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
return __mem_open(inode, file, PTRACE_MODE_READ);
|
|
|
|
}
|
|
|
|
|
2007-10-17 13:30:17 +07:00
|
|
|
static ssize_t environ_read(struct file *file, char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
char *page;
|
|
|
|
unsigned long src = *ppos;
|
2012-06-01 06:26:17 +07:00
|
|
|
int ret = 0;
|
|
|
|
struct mm_struct *mm = file->private_data;
|
2016-01-21 06:01:05 +07:00
|
|
|
unsigned long env_start, env_end;
|
2007-10-17 13:30:17 +07:00
|
|
|
|
2016-05-06 06:22:26 +07:00
|
|
|
/* Ensure the process spawned far enough to have an environment. */
|
|
|
|
if (!mm || !mm->env_end)
|
2012-06-01 06:26:17 +07:00
|
|
|
return 0;
|
2007-10-17 13:30:17 +07:00
|
|
|
|
2017-09-14 06:28:29 +07:00
|
|
|
page = (char *)__get_free_page(GFP_KERNEL);
|
2007-10-17 13:30:17 +07:00
|
|
|
if (!page)
|
2012-06-01 06:26:17 +07:00
|
|
|
return -ENOMEM;
|
2007-10-17 13:30:17 +07:00
|
|
|
|
2011-02-16 10:26:01 +07:00
|
|
|
ret = 0;
|
2017-02-28 05:30:13 +07:00
|
|
|
if (!mmget_not_zero(mm))
|
2012-06-01 06:26:17 +07:00
|
|
|
goto free;
|
2016-01-21 06:01:05 +07:00
|
|
|
|
mm: introduce arg_lock to protect arg_start|end and env_start|end in mm_struct
mmap_sem is on the hot path of kernel, and it very contended, but it is
abused too. It is used to protect arg_start|end and evn_start|end when
reading /proc/$PID/cmdline and /proc/$PID/environ, but it doesn't make
sense since those proc files just expect to read 4 values atomically and
not related to VM, they could be set to arbitrary values by C/R.
And, the mmap_sem contention may cause unexpected issue like below:
INFO: task ps:14018 blocked for more than 120 seconds.
Tainted: G E 4.9.79-009.ali3000.alios7.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
ps D 0 14018 1 0x00000004
Call Trace:
schedule+0x36/0x80
rwsem_down_read_failed+0xf0/0x150
call_rwsem_down_read_failed+0x18/0x30
down_read+0x20/0x40
proc_pid_cmdline_read+0xd9/0x4e0
__vfs_read+0x37/0x150
vfs_read+0x96/0x130
SyS_read+0x55/0xc0
entry_SYSCALL_64_fastpath+0x1a/0xc5
Both Alexey Dobriyan and Michal Hocko suggested to use dedicated lock
for them to mitigate the abuse of mmap_sem.
So, introduce a new spinlock in mm_struct to protect the concurrent
access to arg_start|end, env_start|end and others, as well as replace
write map_sem to read to protect the race condition between prctl and
sys_brk which might break check_data_rlimit(), and makes prctl more
friendly to other VM operations.
This patch just eliminates the abuse of mmap_sem, but it can't resolve
the above hung task warning completely since the later
access_remote_vm() call needs acquire mmap_sem. The mmap_sem
scalability issue will be solved in the future.
[yang.shi@linux.alibaba.com: add comment about mmap_sem and arg_lock]
Link: http://lkml.kernel.org/r/1524077799-80690-1-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1523730291-109696-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 07:05:28 +07:00
|
|
|
spin_lock(&mm->arg_lock);
|
2016-01-21 06:01:05 +07:00
|
|
|
env_start = mm->env_start;
|
|
|
|
env_end = mm->env_end;
|
mm: introduce arg_lock to protect arg_start|end and env_start|end in mm_struct
mmap_sem is on the hot path of kernel, and it very contended, but it is
abused too. It is used to protect arg_start|end and evn_start|end when
reading /proc/$PID/cmdline and /proc/$PID/environ, but it doesn't make
sense since those proc files just expect to read 4 values atomically and
not related to VM, they could be set to arbitrary values by C/R.
And, the mmap_sem contention may cause unexpected issue like below:
INFO: task ps:14018 blocked for more than 120 seconds.
Tainted: G E 4.9.79-009.ali3000.alios7.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
ps D 0 14018 1 0x00000004
Call Trace:
schedule+0x36/0x80
rwsem_down_read_failed+0xf0/0x150
call_rwsem_down_read_failed+0x18/0x30
down_read+0x20/0x40
proc_pid_cmdline_read+0xd9/0x4e0
__vfs_read+0x37/0x150
vfs_read+0x96/0x130
SyS_read+0x55/0xc0
entry_SYSCALL_64_fastpath+0x1a/0xc5
Both Alexey Dobriyan and Michal Hocko suggested to use dedicated lock
for them to mitigate the abuse of mmap_sem.
So, introduce a new spinlock in mm_struct to protect the concurrent
access to arg_start|end, env_start|end and others, as well as replace
write map_sem to read to protect the race condition between prctl and
sys_brk which might break check_data_rlimit(), and makes prctl more
friendly to other VM operations.
This patch just eliminates the abuse of mmap_sem, but it can't resolve
the above hung task warning completely since the later
access_remote_vm() call needs acquire mmap_sem. The mmap_sem
scalability issue will be solved in the future.
[yang.shi@linux.alibaba.com: add comment about mmap_sem and arg_lock]
Link: http://lkml.kernel.org/r/1524077799-80690-1-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1523730291-109696-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 07:05:28 +07:00
|
|
|
spin_unlock(&mm->arg_lock);
|
2016-01-21 06:01:05 +07:00
|
|
|
|
2007-10-17 13:30:17 +07:00
|
|
|
while (count > 0) {
|
2012-07-31 04:42:26 +07:00
|
|
|
size_t this_len, max_len;
|
|
|
|
int retval;
|
2007-10-17 13:30:17 +07:00
|
|
|
|
2016-01-21 06:01:05 +07:00
|
|
|
if (src >= (env_end - env_start))
|
2007-10-17 13:30:17 +07:00
|
|
|
break;
|
|
|
|
|
2016-01-21 06:01:05 +07:00
|
|
|
this_len = env_end - (env_start + src);
|
2012-07-31 04:42:26 +07:00
|
|
|
|
|
|
|
max_len = min_t(size_t, PAGE_SIZE, count);
|
|
|
|
this_len = min(max_len, this_len);
|
2007-10-17 13:30:17 +07:00
|
|
|
|
2018-05-11 13:11:44 +07:00
|
|
|
retval = access_remote_vm(mm, (env_start + src), page, this_len, FOLL_ANON);
|
2007-10-17 13:30:17 +07:00
|
|
|
|
|
|
|
if (retval <= 0) {
|
|
|
|
ret = retval;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (copy_to_user(buf, page, retval)) {
|
|
|
|
ret = -EFAULT;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret += retval;
|
|
|
|
src += retval;
|
|
|
|
buf += retval;
|
|
|
|
count -= retval;
|
|
|
|
}
|
|
|
|
*ppos = src;
|
|
|
|
mmput(mm);
|
2012-06-01 06:26:17 +07:00
|
|
|
|
|
|
|
free:
|
2007-10-17 13:30:17 +07:00
|
|
|
free_page((unsigned long) page);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_environ_operations = {
|
2012-06-01 06:26:17 +07:00
|
|
|
.open = environ_open,
|
2007-10-17 13:30:17 +07:00
|
|
|
.read = environ_read,
|
2010-03-18 05:06:02 +07:00
|
|
|
.llseek = generic_file_llseek,
|
2012-06-01 06:26:17 +07:00
|
|
|
.release = mem_release,
|
2007-10-17 13:30:17 +07:00
|
|
|
};
|
|
|
|
|
2016-10-06 05:43:43 +07:00
|
|
|
static int auxv_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
return __mem_open(inode, file, PTRACE_MODE_READ_FSCREDS);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t auxv_read(struct file *file, char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
struct mm_struct *mm = file->private_data;
|
|
|
|
unsigned int nwords = 0;
|
2016-10-28 07:46:50 +07:00
|
|
|
|
|
|
|
if (!mm)
|
|
|
|
return 0;
|
2016-10-06 05:43:43 +07:00
|
|
|
do {
|
|
|
|
nwords += 2;
|
|
|
|
} while (mm->saved_auxv[nwords - 2] != 0); /* AT_NULL */
|
|
|
|
return simple_read_from_buffer(buf, count, ppos, mm->saved_auxv,
|
|
|
|
nwords * sizeof(mm->saved_auxv[0]));
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_auxv_operations = {
|
|
|
|
.open = auxv_open,
|
|
|
|
.read = auxv_read,
|
|
|
|
.llseek = generic_file_llseek,
|
|
|
|
.release = mem_release,
|
|
|
|
};
|
|
|
|
|
2012-11-13 08:53:04 +07:00
|
|
|
static ssize_t oom_adj_read(struct file *file, char __user *buf, size_t count,
|
|
|
|
loff_t *ppos)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct task_struct *task = get_proc_task(file_inode(file));
|
2012-11-13 08:53:04 +07:00
|
|
|
char buffer[PROC_NUMBUF];
|
|
|
|
int oom_adj = OOM_ADJUST_MIN;
|
|
|
|
size_t len;
|
|
|
|
|
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
2016-07-29 05:44:37 +07:00
|
|
|
if (task->signal->oom_score_adj == OOM_SCORE_ADJ_MAX)
|
|
|
|
oom_adj = OOM_ADJUST_MAX;
|
|
|
|
else
|
|
|
|
oom_adj = (task->signal->oom_score_adj * -OOM_DISABLE) /
|
|
|
|
OOM_SCORE_ADJ_MAX;
|
2012-11-13 08:53:04 +07:00
|
|
|
put_task_struct(task);
|
|
|
|
len = snprintf(buffer, sizeof(buffer), "%d\n", oom_adj);
|
|
|
|
return simple_read_from_buffer(buf, count, ppos, buffer, len);
|
|
|
|
}
|
|
|
|
|
2016-07-29 05:44:40 +07:00
|
|
|
static int __set_oom_adj(struct file *file, int oom_adj, bool legacy)
|
|
|
|
{
|
|
|
|
static DEFINE_MUTEX(oom_adj_mutex);
|
2016-07-29 05:44:43 +07:00
|
|
|
struct mm_struct *mm = NULL;
|
2016-07-29 05:44:40 +07:00
|
|
|
struct task_struct *task;
|
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
task = get_proc_task(file_inode(file));
|
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
|
|
|
|
|
|
|
mutex_lock(&oom_adj_mutex);
|
|
|
|
if (legacy) {
|
|
|
|
if (oom_adj < task->signal->oom_score_adj &&
|
|
|
|
!capable(CAP_SYS_RESOURCE)) {
|
|
|
|
err = -EACCES;
|
|
|
|
goto err_unlock;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* /proc/pid/oom_adj is provided for legacy purposes, ask users to use
|
|
|
|
* /proc/pid/oom_score_adj instead.
|
|
|
|
*/
|
|
|
|
pr_warn_once("%s (%d): /proc/%d/oom_adj is deprecated, please use /proc/%d/oom_score_adj instead.\n",
|
|
|
|
current->comm, task_pid_nr(current), task_pid_nr(task),
|
|
|
|
task_pid_nr(task));
|
|
|
|
} else {
|
|
|
|
if ((short)oom_adj < task->signal->oom_score_adj_min &&
|
|
|
|
!capable(CAP_SYS_RESOURCE)) {
|
|
|
|
err = -EACCES;
|
|
|
|
goto err_unlock;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-07-29 05:44:43 +07:00
|
|
|
/*
|
|
|
|
* Make sure we will check other processes sharing the mm if this is
|
|
|
|
* not vfrok which wants its own oom_score_adj.
|
|
|
|
* pin the mm so it doesn't go away and get reused after task_unlock
|
|
|
|
*/
|
|
|
|
if (!task->vfork_done) {
|
|
|
|
struct task_struct *p = find_lock_task_mm(task);
|
|
|
|
|
|
|
|
if (p) {
|
|
|
|
if (atomic_read(&p->mm->mm_users) > 1) {
|
|
|
|
mm = p->mm;
|
2017-02-28 05:30:07 +07:00
|
|
|
mmgrab(mm);
|
2016-07-29 05:44:43 +07:00
|
|
|
}
|
|
|
|
task_unlock(p);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-07-29 05:44:40 +07:00
|
|
|
task->signal->oom_score_adj = oom_adj;
|
|
|
|
if (!legacy && has_capability_noaudit(current, CAP_SYS_RESOURCE))
|
|
|
|
task->signal->oom_score_adj_min = (short)oom_adj;
|
|
|
|
trace_oom_score_adj_update(task);
|
2016-07-29 05:44:43 +07:00
|
|
|
|
|
|
|
if (mm) {
|
|
|
|
struct task_struct *p;
|
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
for_each_process(p) {
|
|
|
|
if (same_thread_group(task, p))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* do not touch kernel threads or the global init */
|
|
|
|
if (p->flags & PF_KTHREAD || is_global_init(p))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
task_lock(p);
|
|
|
|
if (!p->vfork_done && process_shares_mm(p, mm)) {
|
|
|
|
pr_info("updating oom_score_adj for %d (%s) from %d to %d because it shares mm with %d (%s). Report if this is unexpected.\n",
|
|
|
|
task_pid_nr(p), p->comm,
|
|
|
|
p->signal->oom_score_adj, oom_adj,
|
|
|
|
task_pid_nr(task), task->comm);
|
|
|
|
p->signal->oom_score_adj = oom_adj;
|
|
|
|
if (!legacy && has_capability_noaudit(current, CAP_SYS_RESOURCE))
|
|
|
|
p->signal->oom_score_adj_min = (short)oom_adj;
|
|
|
|
}
|
|
|
|
task_unlock(p);
|
|
|
|
}
|
|
|
|
rcu_read_unlock();
|
|
|
|
mmdrop(mm);
|
|
|
|
}
|
2016-07-29 05:44:40 +07:00
|
|
|
err_unlock:
|
|
|
|
mutex_unlock(&oom_adj_mutex);
|
|
|
|
put_task_struct(task);
|
|
|
|
return err;
|
|
|
|
}
|
2016-07-29 05:44:37 +07:00
|
|
|
|
2015-11-06 09:50:32 +07:00
|
|
|
/*
|
|
|
|
* /proc/pid/oom_adj exists solely for backwards compatibility with previous
|
|
|
|
* kernels. The effective policy is defined by oom_score_adj, which has a
|
|
|
|
* different scale: oom_adj grew exponentially and oom_score_adj grows linearly.
|
|
|
|
* Values written to oom_adj are simply mapped linearly to oom_score_adj.
|
|
|
|
* Processes that become oom disabled via oom_adj will still be oom disabled
|
|
|
|
* with this implementation.
|
|
|
|
*
|
|
|
|
* oom_adj cannot be removed since existing userspace binaries use it.
|
|
|
|
*/
|
2012-11-13 08:53:04 +07:00
|
|
|
static ssize_t oom_adj_write(struct file *file, const char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
char buffer[PROC_NUMBUF];
|
|
|
|
int oom_adj;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
memset(buffer, 0, sizeof(buffer));
|
|
|
|
if (count > sizeof(buffer) - 1)
|
|
|
|
count = sizeof(buffer) - 1;
|
|
|
|
if (copy_from_user(buffer, buf, count)) {
|
|
|
|
err = -EFAULT;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = kstrtoint(strstrip(buffer), 0, &oom_adj);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
if ((oom_adj < OOM_ADJUST_MIN || oom_adj > OOM_ADJUST_MAX) &&
|
|
|
|
oom_adj != OOM_DISABLE) {
|
|
|
|
err = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Scale /proc/pid/oom_score_adj appropriately ensuring that a maximum
|
|
|
|
* value is always attainable.
|
|
|
|
*/
|
|
|
|
if (oom_adj == OOM_ADJUST_MAX)
|
|
|
|
oom_adj = OOM_SCORE_ADJ_MAX;
|
|
|
|
else
|
|
|
|
oom_adj = (oom_adj * OOM_SCORE_ADJ_MAX) / -OOM_DISABLE;
|
|
|
|
|
2016-07-29 05:44:40 +07:00
|
|
|
err = __set_oom_adj(file, oom_adj, true);
|
2012-11-13 08:53:04 +07:00
|
|
|
out:
|
|
|
|
return err < 0 ? err : count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_oom_adj_operations = {
|
|
|
|
.read = oom_adj_read,
|
|
|
|
.write = oom_adj_write,
|
|
|
|
.llseek = generic_file_llseek,
|
|
|
|
};
|
|
|
|
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
static ssize_t oom_score_adj_read(struct file *file, char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct task_struct *task = get_proc_task(file_inode(file));
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
char buffer[PROC_NUMBUF];
|
2012-12-12 07:02:54 +07:00
|
|
|
short oom_score_adj = OOM_SCORE_ADJ_MIN;
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
size_t len;
|
|
|
|
|
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
2016-07-29 05:44:37 +07:00
|
|
|
oom_score_adj = task->signal->oom_score_adj;
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
put_task_struct(task);
|
2012-12-12 07:02:54 +07:00
|
|
|
len = snprintf(buffer, sizeof(buffer), "%hd\n", oom_score_adj);
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
return simple_read_from_buffer(buf, count, ppos, buffer, len);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t oom_score_adj_write(struct file *file, const char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
char buffer[PROC_NUMBUF];
|
2011-05-27 06:25:50 +07:00
|
|
|
int oom_score_adj;
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
int err;
|
|
|
|
|
|
|
|
memset(buffer, 0, sizeof(buffer));
|
|
|
|
if (count > sizeof(buffer) - 1)
|
|
|
|
count = sizeof(buffer) - 1;
|
2010-10-27 04:21:25 +07:00
|
|
|
if (copy_from_user(buffer, buf, count)) {
|
|
|
|
err = -EFAULT;
|
|
|
|
goto out;
|
|
|
|
}
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
|
2011-05-27 06:25:50 +07:00
|
|
|
err = kstrtoint(strstrip(buffer), 0, &oom_score_adj);
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
if (err)
|
2010-10-27 04:21:25 +07:00
|
|
|
goto out;
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
if (oom_score_adj < OOM_SCORE_ADJ_MIN ||
|
2010-10-27 04:21:25 +07:00
|
|
|
oom_score_adj > OOM_SCORE_ADJ_MAX) {
|
|
|
|
err = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
|
2016-07-29 05:44:40 +07:00
|
|
|
err = __set_oom_adj(file, oom_score_adj, false);
|
2010-10-27 04:21:25 +07:00
|
|
|
out:
|
|
|
|
return err < 0 ? err : count;
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_oom_score_adj_operations = {
|
|
|
|
.read = oom_score_adj_read,
|
|
|
|
.write = oom_score_adj_write,
|
llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 23:52:59 +07:00
|
|
|
.llseek = default_llseek,
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
};
|
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
#ifdef CONFIG_AUDITSYSCALL
|
2016-10-29 23:04:39 +07:00
|
|
|
#define TMPBUFLEN 11
|
2005-04-17 05:20:36 +07:00
|
|
|
static ssize_t proc_loginuid_read(struct file * file, char __user * buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct inode * inode = file_inode(file);
|
2006-06-26 14:25:55 +07:00
|
|
|
struct task_struct *task = get_proc_task(inode);
|
2005-04-17 05:20:36 +07:00
|
|
|
ssize_t length;
|
|
|
|
char tmpbuf[TMPBUFLEN];
|
|
|
|
|
2006-06-26 14:25:55 +07:00
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
2005-04-17 05:20:36 +07:00
|
|
|
length = scnprintf(tmpbuf, TMPBUFLEN, "%u",
|
2012-09-11 12:39:43 +07:00
|
|
|
from_kuid(file->f_cred->user_ns,
|
|
|
|
audit_get_loginuid(task)));
|
2006-06-26 14:25:55 +07:00
|
|
|
put_task_struct(task);
|
2005-04-17 05:20:36 +07:00
|
|
|
return simple_read_from_buffer(buf, count, ppos, tmpbuf, length);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t proc_loginuid_write(struct file * file, const char __user * buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct inode * inode = file_inode(file);
|
2005-04-17 05:20:36 +07:00
|
|
|
uid_t loginuid;
|
2012-09-11 12:39:43 +07:00
|
|
|
kuid_t kloginuid;
|
2015-09-10 05:36:59 +07:00
|
|
|
int rv;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2010-02-23 08:04:52 +07:00
|
|
|
rcu_read_lock();
|
|
|
|
if (current != pid_task(proc_pid(inode), PIDTYPE_PID)) {
|
|
|
|
rcu_read_unlock();
|
2005-04-17 05:20:36 +07:00
|
|
|
return -EPERM;
|
2010-02-23 08:04:52 +07:00
|
|
|
}
|
|
|
|
rcu_read_unlock();
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
if (*ppos != 0) {
|
|
|
|
/* No partial writes. */
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2015-09-10 05:36:59 +07:00
|
|
|
rv = kstrtou32_from_user(buf, count, 10, &loginuid);
|
|
|
|
if (rv < 0)
|
|
|
|
return rv;
|
2013-05-24 20:49:14 +07:00
|
|
|
|
|
|
|
/* is userspace tring to explicitly UNSET the loginuid? */
|
|
|
|
if (loginuid == AUDIT_UID_UNSET) {
|
|
|
|
kloginuid = INVALID_UID;
|
|
|
|
} else {
|
|
|
|
kloginuid = make_kuid(file->f_cred->user_ns, loginuid);
|
2015-09-10 05:36:59 +07:00
|
|
|
if (!uid_valid(kloginuid))
|
|
|
|
return -EINVAL;
|
2012-09-11 12:39:43 +07:00
|
|
|
}
|
|
|
|
|
2015-09-10 05:36:59 +07:00
|
|
|
rv = audit_set_loginuid(kloginuid);
|
|
|
|
if (rv < 0)
|
|
|
|
return rv;
|
|
|
|
return count;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2007-02-12 15:55:34 +07:00
|
|
|
static const struct file_operations proc_loginuid_operations = {
|
2005-04-17 05:20:36 +07:00
|
|
|
.read = proc_loginuid_read,
|
|
|
|
.write = proc_loginuid_write,
|
2010-03-18 05:06:02 +07:00
|
|
|
.llseek = generic_file_llseek,
|
2005-04-17 05:20:36 +07:00
|
|
|
};
|
2008-03-13 19:15:31 +07:00
|
|
|
|
|
|
|
static ssize_t proc_sessionid_read(struct file * file, char __user * buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct inode * inode = file_inode(file);
|
2008-03-13 19:15:31 +07:00
|
|
|
struct task_struct *task = get_proc_task(inode);
|
|
|
|
ssize_t length;
|
|
|
|
char tmpbuf[TMPBUFLEN];
|
|
|
|
|
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
|
|
|
length = scnprintf(tmpbuf, TMPBUFLEN, "%u",
|
|
|
|
audit_get_sessionid(task));
|
|
|
|
put_task_struct(task);
|
|
|
|
return simple_read_from_buffer(buf, count, ppos, tmpbuf, length);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_sessionid_operations = {
|
|
|
|
.read = proc_sessionid_read,
|
2010-03-18 05:06:02 +07:00
|
|
|
.llseek = generic_file_llseek,
|
2008-03-13 19:15:31 +07:00
|
|
|
};
|
2005-04-17 05:20:36 +07:00
|
|
|
#endif
|
|
|
|
|
2006-12-08 17:39:47 +07:00
|
|
|
#ifdef CONFIG_FAULT_INJECTION
|
|
|
|
static ssize_t proc_fault_inject_read(struct file * file, char __user * buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct task_struct *task = get_proc_task(file_inode(file));
|
2006-12-08 17:39:47 +07:00
|
|
|
char buffer[PROC_NUMBUF];
|
|
|
|
size_t len;
|
|
|
|
int make_it_fail;
|
|
|
|
|
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
|
|
|
make_it_fail = task->make_it_fail;
|
|
|
|
put_task_struct(task);
|
|
|
|
|
|
|
|
len = snprintf(buffer, sizeof(buffer), "%i\n", make_it_fail);
|
2007-05-08 14:31:41 +07:00
|
|
|
|
|
|
|
return simple_read_from_buffer(buf, count, ppos, buffer, len);
|
2006-12-08 17:39:47 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t proc_fault_inject_write(struct file * file,
|
|
|
|
const char __user * buf, size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
struct task_struct *task;
|
2015-09-10 05:36:59 +07:00
|
|
|
char buffer[PROC_NUMBUF];
|
2006-12-08 17:39:47 +07:00
|
|
|
int make_it_fail;
|
2015-09-10 05:36:59 +07:00
|
|
|
int rv;
|
2006-12-08 17:39:47 +07:00
|
|
|
|
|
|
|
if (!capable(CAP_SYS_RESOURCE))
|
|
|
|
return -EPERM;
|
|
|
|
memset(buffer, 0, sizeof(buffer));
|
|
|
|
if (count > sizeof(buffer) - 1)
|
|
|
|
count = sizeof(buffer) - 1;
|
|
|
|
if (copy_from_user(buffer, buf, count))
|
|
|
|
return -EFAULT;
|
2015-09-10 05:36:59 +07:00
|
|
|
rv = kstrtoint(strstrip(buffer), 0, &make_it_fail);
|
|
|
|
if (rv < 0)
|
|
|
|
return rv;
|
2014-04-08 05:39:15 +07:00
|
|
|
if (make_it_fail < 0 || make_it_fail > 1)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2013-01-24 05:07:38 +07:00
|
|
|
task = get_proc_task(file_inode(file));
|
2006-12-08 17:39:47 +07:00
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
|
|
|
task->make_it_fail = make_it_fail;
|
|
|
|
put_task_struct(task);
|
2009-09-23 06:45:38 +07:00
|
|
|
|
|
|
|
return count;
|
2006-12-08 17:39:47 +07:00
|
|
|
}
|
|
|
|
|
2007-02-12 15:55:34 +07:00
|
|
|
static const struct file_operations proc_fault_inject_operations = {
|
2006-12-08 17:39:47 +07:00
|
|
|
.read = proc_fault_inject_read,
|
|
|
|
.write = proc_fault_inject_write,
|
2010-03-18 05:06:02 +07:00
|
|
|
.llseek = generic_file_llseek,
|
2006-12-08 17:39:47 +07:00
|
|
|
};
|
fault-inject: support systematic fault injection
Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:
"Write to this file of integer N makes N-th call in the current task
fail (N is 0-based). Read from this file returns a single char 'Y' or
'N' that says if the fault setup with a previous write to this file
was injected or not, and disables the fault if it wasn't yet injected.
Note that this file enables all types of faults (slab, futex, etc).
This setting takes precedence over all other generic settings like
probability, interval, times, etc. But per-capability settings (e.g.
fail_futex/ignore-private) take precedence over it. This feature is
intended for systematic testing of faults in a single system call. See
an example below"
Why add a new setting:
1. Existing settings are global rather than per-task.
So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
of all of probability, interval, times, space, task-filter and
unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
stress testing better be done from an unprivileged user.
Similarly, this would require opening the debugfs files to the
unprivileged user, as he would need to reopen at least times file
(not possible to pre-open before dropping privs).
The proposed interface solves all of the above (see the example).
We want to integrate this into syzkaller fuzzer. A prototype has found
10 bugs in kernel in first day of usage:
https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance
I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned. So I am fine with the current
version of the code.
[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13 04:34:35 +07:00
|
|
|
|
|
|
|
static ssize_t proc_fail_nth_write(struct file *file, const char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
struct task_struct *task;
|
2017-07-15 04:49:52 +07:00
|
|
|
int err;
|
|
|
|
unsigned int n;
|
fault-inject: support systematic fault injection
Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:
"Write to this file of integer N makes N-th call in the current task
fail (N is 0-based). Read from this file returns a single char 'Y' or
'N' that says if the fault setup with a previous write to this file
was injected or not, and disables the fault if it wasn't yet injected.
Note that this file enables all types of faults (slab, futex, etc).
This setting takes precedence over all other generic settings like
probability, interval, times, etc. But per-capability settings (e.g.
fail_futex/ignore-private) take precedence over it. This feature is
intended for systematic testing of faults in a single system call. See
an example below"
Why add a new setting:
1. Existing settings are global rather than per-task.
So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
of all of probability, interval, times, space, task-filter and
unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
stress testing better be done from an unprivileged user.
Similarly, this would require opening the debugfs files to the
unprivileged user, as he would need to reopen at least times file
(not possible to pre-open before dropping privs).
The proposed interface solves all of the above (see the example).
We want to integrate this into syzkaller fuzzer. A prototype has found
10 bugs in kernel in first day of usage:
https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance
I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned. So I am fine with the current
version of the code.
[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13 04:34:35 +07:00
|
|
|
|
2017-07-15 04:49:57 +07:00
|
|
|
err = kstrtouint_from_user(buf, count, 0, &n);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
fault-inject: support systematic fault injection
Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:
"Write to this file of integer N makes N-th call in the current task
fail (N is 0-based). Read from this file returns a single char 'Y' or
'N' that says if the fault setup with a previous write to this file
was injected or not, and disables the fault if it wasn't yet injected.
Note that this file enables all types of faults (slab, futex, etc).
This setting takes precedence over all other generic settings like
probability, interval, times, etc. But per-capability settings (e.g.
fail_futex/ignore-private) take precedence over it. This feature is
intended for systematic testing of faults in a single system call. See
an example below"
Why add a new setting:
1. Existing settings are global rather than per-task.
So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
of all of probability, interval, times, space, task-filter and
unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
stress testing better be done from an unprivileged user.
Similarly, this would require opening the debugfs files to the
unprivileged user, as he would need to reopen at least times file
(not possible to pre-open before dropping privs).
The proposed interface solves all of the above (see the example).
We want to integrate this into syzkaller fuzzer. A prototype has found
10 bugs in kernel in first day of usage:
https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance
I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned. So I am fine with the current
version of the code.
[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13 04:34:35 +07:00
|
|
|
task = get_proc_task(file_inode(file));
|
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
2018-02-07 06:36:55 +07:00
|
|
|
task->fail_nth = n;
|
fault-inject: support systematic fault injection
Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:
"Write to this file of integer N makes N-th call in the current task
fail (N is 0-based). Read from this file returns a single char 'Y' or
'N' that says if the fault setup with a previous write to this file
was injected or not, and disables the fault if it wasn't yet injected.
Note that this file enables all types of faults (slab, futex, etc).
This setting takes precedence over all other generic settings like
probability, interval, times, etc. But per-capability settings (e.g.
fail_futex/ignore-private) take precedence over it. This feature is
intended for systematic testing of faults in a single system call. See
an example below"
Why add a new setting:
1. Existing settings are global rather than per-task.
So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
of all of probability, interval, times, space, task-filter and
unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
stress testing better be done from an unprivileged user.
Similarly, this would require opening the debugfs files to the
unprivileged user, as he would need to reopen at least times file
(not possible to pre-open before dropping privs).
The proposed interface solves all of the above (see the example).
We want to integrate this into syzkaller fuzzer. A prototype has found
10 bugs in kernel in first day of usage:
https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance
I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned. So I am fine with the current
version of the code.
[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13 04:34:35 +07:00
|
|
|
put_task_struct(task);
|
2017-07-15 04:49:57 +07:00
|
|
|
|
fault-inject: support systematic fault injection
Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:
"Write to this file of integer N makes N-th call in the current task
fail (N is 0-based). Read from this file returns a single char 'Y' or
'N' that says if the fault setup with a previous write to this file
was injected or not, and disables the fault if it wasn't yet injected.
Note that this file enables all types of faults (slab, futex, etc).
This setting takes precedence over all other generic settings like
probability, interval, times, etc. But per-capability settings (e.g.
fail_futex/ignore-private) take precedence over it. This feature is
intended for systematic testing of faults in a single system call. See
an example below"
Why add a new setting:
1. Existing settings are global rather than per-task.
So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
of all of probability, interval, times, space, task-filter and
unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
stress testing better be done from an unprivileged user.
Similarly, this would require opening the debugfs files to the
unprivileged user, as he would need to reopen at least times file
(not possible to pre-open before dropping privs).
The proposed interface solves all of the above (see the example).
We want to integrate this into syzkaller fuzzer. A prototype has found
10 bugs in kernel in first day of usage:
https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance
I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned. So I am fine with the current
version of the code.
[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13 04:34:35 +07:00
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t proc_fail_nth_read(struct file *file, char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
struct task_struct *task;
|
2017-07-15 04:49:54 +07:00
|
|
|
char numbuf[PROC_NUMBUF];
|
|
|
|
ssize_t len;
|
fault-inject: support systematic fault injection
Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:
"Write to this file of integer N makes N-th call in the current task
fail (N is 0-based). Read from this file returns a single char 'Y' or
'N' that says if the fault setup with a previous write to this file
was injected or not, and disables the fault if it wasn't yet injected.
Note that this file enables all types of faults (slab, futex, etc).
This setting takes precedence over all other generic settings like
probability, interval, times, etc. But per-capability settings (e.g.
fail_futex/ignore-private) take precedence over it. This feature is
intended for systematic testing of faults in a single system call. See
an example below"
Why add a new setting:
1. Existing settings are global rather than per-task.
So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
of all of probability, interval, times, space, task-filter and
unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
stress testing better be done from an unprivileged user.
Similarly, this would require opening the debugfs files to the
unprivileged user, as he would need to reopen at least times file
(not possible to pre-open before dropping privs).
The proposed interface solves all of the above (see the example).
We want to integrate this into syzkaller fuzzer. A prototype has found
10 bugs in kernel in first day of usage:
https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance
I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned. So I am fine with the current
version of the code.
[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13 04:34:35 +07:00
|
|
|
|
|
|
|
task = get_proc_task(file_inode(file));
|
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
2018-02-07 06:36:55 +07:00
|
|
|
len = snprintf(numbuf, sizeof(numbuf), "%u\n", task->fail_nth);
|
2017-07-15 04:49:57 +07:00
|
|
|
put_task_struct(task);
|
2018-08-22 11:54:27 +07:00
|
|
|
return simple_read_from_buffer(buf, count, ppos, numbuf, len);
|
fault-inject: support systematic fault injection
Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:
"Write to this file of integer N makes N-th call in the current task
fail (N is 0-based). Read from this file returns a single char 'Y' or
'N' that says if the fault setup with a previous write to this file
was injected or not, and disables the fault if it wasn't yet injected.
Note that this file enables all types of faults (slab, futex, etc).
This setting takes precedence over all other generic settings like
probability, interval, times, etc. But per-capability settings (e.g.
fail_futex/ignore-private) take precedence over it. This feature is
intended for systematic testing of faults in a single system call. See
an example below"
Why add a new setting:
1. Existing settings are global rather than per-task.
So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
of all of probability, interval, times, space, task-filter and
unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
stress testing better be done from an unprivileged user.
Similarly, this would require opening the debugfs files to the
unprivileged user, as he would need to reopen at least times file
(not possible to pre-open before dropping privs).
The proposed interface solves all of the above (see the example).
We want to integrate this into syzkaller fuzzer. A prototype has found
10 bugs in kernel in first day of usage:
https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance
I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned. So I am fine with the current
version of the code.
[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13 04:34:35 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_fail_nth_operations = {
|
|
|
|
.read = proc_fail_nth_read,
|
|
|
|
.write = proc_fail_nth_write,
|
|
|
|
};
|
2006-12-08 17:39:47 +07:00
|
|
|
#endif
|
|
|
|
|
2008-01-26 03:08:34 +07:00
|
|
|
|
2007-07-09 23:52:00 +07:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
|
|
|
/*
|
|
|
|
* Print out various scheduling related per-task fields:
|
|
|
|
*/
|
|
|
|
static int sched_show(struct seq_file *m, void *v)
|
|
|
|
{
|
|
|
|
struct inode *inode = m->private;
|
2018-05-16 12:19:01 +07:00
|
|
|
struct pid_namespace *ns = proc_pid_ns(inode);
|
2007-07-09 23:52:00 +07:00
|
|
|
struct task_struct *p;
|
|
|
|
|
|
|
|
p = get_proc_task(inode);
|
|
|
|
if (!p)
|
|
|
|
return -ESRCH;
|
2017-08-06 11:41:41 +07:00
|
|
|
proc_sched_show_task(p, ns, m);
|
2007-07-09 23:52:00 +07:00
|
|
|
|
|
|
|
put_task_struct(p);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
|
|
|
sched_write(struct file *file, const char __user *buf,
|
|
|
|
size_t count, loff_t *offset)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct inode *inode = file_inode(file);
|
2007-07-09 23:52:00 +07:00
|
|
|
struct task_struct *p;
|
|
|
|
|
|
|
|
p = get_proc_task(inode);
|
|
|
|
if (!p)
|
|
|
|
return -ESRCH;
|
|
|
|
proc_sched_set_task(p);
|
|
|
|
|
|
|
|
put_task_struct(p);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sched_open(struct inode *inode, struct file *filp)
|
|
|
|
{
|
2011-01-13 08:00:34 +07:00
|
|
|
return single_open(filp, sched_show, inode);
|
2007-07-09 23:52:00 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_pid_sched_operations = {
|
|
|
|
.open = sched_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.write = sched_write,
|
|
|
|
.llseek = seq_lseek,
|
2007-07-31 14:38:50 +07:00
|
|
|
.release = single_release,
|
2007-07-09 23:52:00 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
sched: Add 'autogroup' scheduling feature: automated per session task groups
A recurring complaint from CFS users is that parallel kbuild has
a negative impact on desktop interactivity. This patch
implements an idea from Linus, to automatically create task
groups. Currently, only per session autogroups are implemented,
but the patch leaves the way open for enhancement.
Implementation: each task's signal struct contains an inherited
pointer to a refcounted autogroup struct containing a task group
pointer, the default for all tasks pointing to the
init_task_group. When a task calls setsid(), a new task group
is created, the process is moved into the new task group, and a
reference to the preveious task group is dropped. Child
processes inherit this task group thereafter, and increase it's
refcount. When the last thread of a process exits, the
process's reference is dropped, such that when the last process
referencing an autogroup exits, the autogroup is destroyed.
At runqueue selection time, IFF a task has no cgroup assignment,
its current autogroup is used.
Autogroup bandwidth is controllable via setting it's nice level
through the proc filesystem:
cat /proc/<pid>/autogroup
Displays the task's group and the group's nice level.
echo <nice level> > /proc/<pid>/autogroup
Sets the task group's shares to the weight of nice <level> task.
Setting nice level is rate limited for !admin users due to the
abuse risk of task group locking.
The feature is enabled from boot by default if
CONFIG_SCHED_AUTOGROUP=y is selected, but can be disabled via
the boot option noautogroup, and can also be turned on/off on
the fly via:
echo [01] > /proc/sys/kernel/sched_autogroup_enabled
... which will automatically move tasks to/from the root task group.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
[ Removed the task_group_path() debug code, and fixed !EVENTFD build failure. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290281700.28711.9.camel@maggy.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-30 20:18:03 +07:00
|
|
|
#ifdef CONFIG_SCHED_AUTOGROUP
|
|
|
|
/*
|
|
|
|
* Print out autogroup related information:
|
|
|
|
*/
|
|
|
|
static int sched_autogroup_show(struct seq_file *m, void *v)
|
|
|
|
{
|
|
|
|
struct inode *inode = m->private;
|
|
|
|
struct task_struct *p;
|
|
|
|
|
|
|
|
p = get_proc_task(inode);
|
|
|
|
if (!p)
|
|
|
|
return -ESRCH;
|
|
|
|
proc_sched_autogroup_show_task(p, m);
|
|
|
|
|
|
|
|
put_task_struct(p);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
|
|
|
sched_autogroup_write(struct file *file, const char __user *buf,
|
|
|
|
size_t count, loff_t *offset)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct inode *inode = file_inode(file);
|
sched: Add 'autogroup' scheduling feature: automated per session task groups
A recurring complaint from CFS users is that parallel kbuild has
a negative impact on desktop interactivity. This patch
implements an idea from Linus, to automatically create task
groups. Currently, only per session autogroups are implemented,
but the patch leaves the way open for enhancement.
Implementation: each task's signal struct contains an inherited
pointer to a refcounted autogroup struct containing a task group
pointer, the default for all tasks pointing to the
init_task_group. When a task calls setsid(), a new task group
is created, the process is moved into the new task group, and a
reference to the preveious task group is dropped. Child
processes inherit this task group thereafter, and increase it's
refcount. When the last thread of a process exits, the
process's reference is dropped, such that when the last process
referencing an autogroup exits, the autogroup is destroyed.
At runqueue selection time, IFF a task has no cgroup assignment,
its current autogroup is used.
Autogroup bandwidth is controllable via setting it's nice level
through the proc filesystem:
cat /proc/<pid>/autogroup
Displays the task's group and the group's nice level.
echo <nice level> > /proc/<pid>/autogroup
Sets the task group's shares to the weight of nice <level> task.
Setting nice level is rate limited for !admin users due to the
abuse risk of task group locking.
The feature is enabled from boot by default if
CONFIG_SCHED_AUTOGROUP=y is selected, but can be disabled via
the boot option noautogroup, and can also be turned on/off on
the fly via:
echo [01] > /proc/sys/kernel/sched_autogroup_enabled
... which will automatically move tasks to/from the root task group.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
[ Removed the task_group_path() debug code, and fixed !EVENTFD build failure. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290281700.28711.9.camel@maggy.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-30 20:18:03 +07:00
|
|
|
struct task_struct *p;
|
|
|
|
char buffer[PROC_NUMBUF];
|
2011-05-27 06:25:50 +07:00
|
|
|
int nice;
|
sched: Add 'autogroup' scheduling feature: automated per session task groups
A recurring complaint from CFS users is that parallel kbuild has
a negative impact on desktop interactivity. This patch
implements an idea from Linus, to automatically create task
groups. Currently, only per session autogroups are implemented,
but the patch leaves the way open for enhancement.
Implementation: each task's signal struct contains an inherited
pointer to a refcounted autogroup struct containing a task group
pointer, the default for all tasks pointing to the
init_task_group. When a task calls setsid(), a new task group
is created, the process is moved into the new task group, and a
reference to the preveious task group is dropped. Child
processes inherit this task group thereafter, and increase it's
refcount. When the last thread of a process exits, the
process's reference is dropped, such that when the last process
referencing an autogroup exits, the autogroup is destroyed.
At runqueue selection time, IFF a task has no cgroup assignment,
its current autogroup is used.
Autogroup bandwidth is controllable via setting it's nice level
through the proc filesystem:
cat /proc/<pid>/autogroup
Displays the task's group and the group's nice level.
echo <nice level> > /proc/<pid>/autogroup
Sets the task group's shares to the weight of nice <level> task.
Setting nice level is rate limited for !admin users due to the
abuse risk of task group locking.
The feature is enabled from boot by default if
CONFIG_SCHED_AUTOGROUP=y is selected, but can be disabled via
the boot option noautogroup, and can also be turned on/off on
the fly via:
echo [01] > /proc/sys/kernel/sched_autogroup_enabled
... which will automatically move tasks to/from the root task group.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
[ Removed the task_group_path() debug code, and fixed !EVENTFD build failure. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290281700.28711.9.camel@maggy.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-30 20:18:03 +07:00
|
|
|
int err;
|
|
|
|
|
|
|
|
memset(buffer, 0, sizeof(buffer));
|
|
|
|
if (count > sizeof(buffer) - 1)
|
|
|
|
count = sizeof(buffer) - 1;
|
|
|
|
if (copy_from_user(buffer, buf, count))
|
|
|
|
return -EFAULT;
|
|
|
|
|
2011-05-27 06:25:50 +07:00
|
|
|
err = kstrtoint(strstrip(buffer), 0, &nice);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
sched: Add 'autogroup' scheduling feature: automated per session task groups
A recurring complaint from CFS users is that parallel kbuild has
a negative impact on desktop interactivity. This patch
implements an idea from Linus, to automatically create task
groups. Currently, only per session autogroups are implemented,
but the patch leaves the way open for enhancement.
Implementation: each task's signal struct contains an inherited
pointer to a refcounted autogroup struct containing a task group
pointer, the default for all tasks pointing to the
init_task_group. When a task calls setsid(), a new task group
is created, the process is moved into the new task group, and a
reference to the preveious task group is dropped. Child
processes inherit this task group thereafter, and increase it's
refcount. When the last thread of a process exits, the
process's reference is dropped, such that when the last process
referencing an autogroup exits, the autogroup is destroyed.
At runqueue selection time, IFF a task has no cgroup assignment,
its current autogroup is used.
Autogroup bandwidth is controllable via setting it's nice level
through the proc filesystem:
cat /proc/<pid>/autogroup
Displays the task's group and the group's nice level.
echo <nice level> > /proc/<pid>/autogroup
Sets the task group's shares to the weight of nice <level> task.
Setting nice level is rate limited for !admin users due to the
abuse risk of task group locking.
The feature is enabled from boot by default if
CONFIG_SCHED_AUTOGROUP=y is selected, but can be disabled via
the boot option noautogroup, and can also be turned on/off on
the fly via:
echo [01] > /proc/sys/kernel/sched_autogroup_enabled
... which will automatically move tasks to/from the root task group.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
[ Removed the task_group_path() debug code, and fixed !EVENTFD build failure. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290281700.28711.9.camel@maggy.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-30 20:18:03 +07:00
|
|
|
|
|
|
|
p = get_proc_task(inode);
|
|
|
|
if (!p)
|
|
|
|
return -ESRCH;
|
|
|
|
|
2012-02-23 15:41:27 +07:00
|
|
|
err = proc_sched_autogroup_set_nice(p, nice);
|
sched: Add 'autogroup' scheduling feature: automated per session task groups
A recurring complaint from CFS users is that parallel kbuild has
a negative impact on desktop interactivity. This patch
implements an idea from Linus, to automatically create task
groups. Currently, only per session autogroups are implemented,
but the patch leaves the way open for enhancement.
Implementation: each task's signal struct contains an inherited
pointer to a refcounted autogroup struct containing a task group
pointer, the default for all tasks pointing to the
init_task_group. When a task calls setsid(), a new task group
is created, the process is moved into the new task group, and a
reference to the preveious task group is dropped. Child
processes inherit this task group thereafter, and increase it's
refcount. When the last thread of a process exits, the
process's reference is dropped, such that when the last process
referencing an autogroup exits, the autogroup is destroyed.
At runqueue selection time, IFF a task has no cgroup assignment,
its current autogroup is used.
Autogroup bandwidth is controllable via setting it's nice level
through the proc filesystem:
cat /proc/<pid>/autogroup
Displays the task's group and the group's nice level.
echo <nice level> > /proc/<pid>/autogroup
Sets the task group's shares to the weight of nice <level> task.
Setting nice level is rate limited for !admin users due to the
abuse risk of task group locking.
The feature is enabled from boot by default if
CONFIG_SCHED_AUTOGROUP=y is selected, but can be disabled via
the boot option noautogroup, and can also be turned on/off on
the fly via:
echo [01] > /proc/sys/kernel/sched_autogroup_enabled
... which will automatically move tasks to/from the root task group.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
[ Removed the task_group_path() debug code, and fixed !EVENTFD build failure. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290281700.28711.9.camel@maggy.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-30 20:18:03 +07:00
|
|
|
if (err)
|
|
|
|
count = err;
|
|
|
|
|
|
|
|
put_task_struct(p);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sched_autogroup_open(struct inode *inode, struct file *filp)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = single_open(filp, sched_autogroup_show, NULL);
|
|
|
|
if (!ret) {
|
|
|
|
struct seq_file *m = filp->private_data;
|
|
|
|
|
|
|
|
m->private = inode;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_pid_sched_autogroup_operations = {
|
|
|
|
.open = sched_autogroup_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.write = sched_autogroup_write,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = single_release,
|
|
|
|
};
|
|
|
|
|
|
|
|
#endif /* CONFIG_SCHED_AUTOGROUP */
|
|
|
|
|
2009-12-15 09:00:05 +07:00
|
|
|
static ssize_t comm_write(struct file *file, const char __user *buf,
|
|
|
|
size_t count, loff_t *offset)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct inode *inode = file_inode(file);
|
2009-12-15 09:00:05 +07:00
|
|
|
struct task_struct *p;
|
|
|
|
char buffer[TASK_COMM_LEN];
|
2013-05-01 05:28:18 +07:00
|
|
|
const size_t maxlen = sizeof(buffer) - 1;
|
2009-12-15 09:00:05 +07:00
|
|
|
|
|
|
|
memset(buffer, 0, sizeof(buffer));
|
2013-05-01 05:28:18 +07:00
|
|
|
if (copy_from_user(buffer, buf, count > maxlen ? maxlen : count))
|
2009-12-15 09:00:05 +07:00
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
p = get_proc_task(inode);
|
|
|
|
if (!p)
|
|
|
|
return -ESRCH;
|
|
|
|
|
|
|
|
if (same_thread_group(current, p))
|
|
|
|
set_task_comm(p, buffer);
|
|
|
|
else
|
|
|
|
count = -EINVAL;
|
|
|
|
|
|
|
|
put_task_struct(p);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int comm_show(struct seq_file *m, void *v)
|
|
|
|
{
|
|
|
|
struct inode *inode = m->private;
|
|
|
|
struct task_struct *p;
|
|
|
|
|
|
|
|
p = get_proc_task(inode);
|
|
|
|
if (!p)
|
|
|
|
return -ESRCH;
|
|
|
|
|
2018-05-18 22:47:13 +07:00
|
|
|
proc_task_name(m, p, false);
|
|
|
|
seq_putc(m, '\n');
|
2009-12-15 09:00:05 +07:00
|
|
|
|
|
|
|
put_task_struct(p);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int comm_open(struct inode *inode, struct file *filp)
|
|
|
|
{
|
2011-01-13 08:00:34 +07:00
|
|
|
return single_open(filp, comm_show, inode);
|
2009-12-15 09:00:05 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_pid_set_comm_operations = {
|
|
|
|
.open = comm_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.write = comm_write,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = single_release,
|
|
|
|
};
|
|
|
|
|
2012-01-11 06:11:20 +07:00
|
|
|
static int proc_exe_link(struct dentry *dentry, struct path *exe_path)
|
2008-04-29 15:01:36 +07:00
|
|
|
{
|
|
|
|
struct task_struct *task;
|
|
|
|
struct file *exe_file;
|
|
|
|
|
2015-03-18 05:25:59 +07:00
|
|
|
task = get_proc_task(d_inode(dentry));
|
2008-04-29 15:01:36 +07:00
|
|
|
if (!task)
|
|
|
|
return -ENOENT;
|
2016-08-23 21:20:38 +07:00
|
|
|
exe_file = get_task_exe_file(task);
|
2008-04-29 15:01:36 +07:00
|
|
|
put_task_struct(task);
|
|
|
|
if (exe_file) {
|
|
|
|
*exe_path = exe_file->f_path;
|
|
|
|
path_get(&exe_file->f_path);
|
|
|
|
fput(exe_file);
|
|
|
|
return 0;
|
|
|
|
} else
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
2015-11-17 22:20:54 +07:00
|
|
|
static const char *proc_pid_get_link(struct dentry *dentry,
|
2015-12-30 03:58:39 +07:00
|
|
|
struct inode *inode,
|
|
|
|
struct delayed_call *done)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2012-06-18 21:47:03 +07:00
|
|
|
struct path path;
|
2005-04-17 05:20:36 +07:00
|
|
|
int error = -EACCES;
|
|
|
|
|
2015-11-17 22:20:54 +07:00
|
|
|
if (!dentry)
|
|
|
|
return ERR_PTR(-ECHILD);
|
|
|
|
|
2006-06-26 14:25:58 +07:00
|
|
|
/* Are we allowed to snoop on the tasks file descriptors? */
|
|
|
|
if (!proc_fd_access_allowed(inode))
|
2005-04-17 05:20:36 +07:00
|
|
|
goto out;
|
|
|
|
|
2012-06-18 21:47:03 +07:00
|
|
|
error = PROC_I(inode)->op.proc_get_link(dentry, &path);
|
|
|
|
if (error)
|
|
|
|
goto out;
|
|
|
|
|
2015-05-03 00:37:52 +07:00
|
|
|
nd_jump_link(&path);
|
2012-06-18 21:47:03 +07:00
|
|
|
return NULL;
|
2005-04-17 05:20:36 +07:00
|
|
|
out:
|
[PATCH] Fix up symlink function pointers
This fixes up the symlink functions for the calling convention change:
* afs, autofs4, befs, devfs, freevxfs, jffs2, jfs, ncpfs, procfs,
smbfs, sysvfs, ufs, xfs - prototype change for ->follow_link()
* befs, smbfs, xfs - same for ->put_link()
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-20 06:17:39 +07:00
|
|
|
return ERR_PTR(error);
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2008-02-15 10:38:35 +07:00
|
|
|
static int do_proc_readlink(struct path *path, char __user *buffer, int buflen)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2017-09-14 06:28:29 +07:00
|
|
|
char *tmp = (char *)__get_free_page(GFP_KERNEL);
|
2008-02-15 10:38:35 +07:00
|
|
|
char *pathname;
|
2005-04-17 05:20:36 +07:00
|
|
|
int len;
|
|
|
|
|
|
|
|
if (!tmp)
|
|
|
|
return -ENOMEM;
|
2007-05-08 14:31:41 +07:00
|
|
|
|
2010-12-06 06:51:21 +07:00
|
|
|
pathname = d_path(path, tmp, PAGE_SIZE);
|
2008-02-15 10:38:35 +07:00
|
|
|
len = PTR_ERR(pathname);
|
|
|
|
if (IS_ERR(pathname))
|
2005-04-17 05:20:36 +07:00
|
|
|
goto out;
|
2008-02-15 10:38:35 +07:00
|
|
|
len = tmp + PAGE_SIZE - 1 - pathname;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
if (len > buflen)
|
|
|
|
len = buflen;
|
2008-02-15 10:38:35 +07:00
|
|
|
if (copy_to_user(buffer, pathname, len))
|
2005-04-17 05:20:36 +07:00
|
|
|
len = -EFAULT;
|
|
|
|
out:
|
|
|
|
free_page((unsigned long)tmp);
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int proc_pid_readlink(struct dentry * dentry, char __user * buffer, int buflen)
|
|
|
|
{
|
|
|
|
int error = -EACCES;
|
2015-03-18 05:25:59 +07:00
|
|
|
struct inode *inode = d_inode(dentry);
|
2008-02-15 10:38:35 +07:00
|
|
|
struct path path;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2006-06-26 14:25:58 +07:00
|
|
|
/* Are we allowed to snoop on the tasks file descriptors? */
|
|
|
|
if (!proc_fd_access_allowed(inode))
|
2005-04-17 05:20:36 +07:00
|
|
|
goto out;
|
|
|
|
|
2012-01-11 06:11:20 +07:00
|
|
|
error = PROC_I(inode)->op.proc_get_link(dentry, &path);
|
2005-04-17 05:20:36 +07:00
|
|
|
if (error)
|
|
|
|
goto out;
|
|
|
|
|
2008-02-15 10:38:35 +07:00
|
|
|
error = do_proc_readlink(&path, buffer, buflen);
|
|
|
|
path_put(&path);
|
2005-04-17 05:20:36 +07:00
|
|
|
out:
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
|
2012-08-23 17:43:24 +07:00
|
|
|
const struct inode_operations proc_pid_link_inode_operations = {
|
2005-04-17 05:20:36 +07:00
|
|
|
.readlink = proc_pid_readlink,
|
2015-11-17 22:20:54 +07:00
|
|
|
.get_link = proc_pid_get_link,
|
2006-07-16 02:26:45 +07:00
|
|
|
.setattr = proc_setattr,
|
2005-04-17 05:20:36 +07:00
|
|
|
};
|
|
|
|
|
2006-10-02 16:17:05 +07:00
|
|
|
|
|
|
|
/* building an inode */
|
|
|
|
|
2017-10-01 01:45:42 +07:00
|
|
|
void task_dump_owner(struct task_struct *task, umode_t mode,
|
2017-01-03 04:23:11 +07:00
|
|
|
kuid_t *ruid, kgid_t *rgid)
|
|
|
|
{
|
|
|
|
/* Depending on the state of dumpable compute who should own a
|
|
|
|
* proc file for a task.
|
|
|
|
*/
|
|
|
|
const struct cred *cred;
|
|
|
|
kuid_t uid;
|
|
|
|
kgid_t gid;
|
|
|
|
|
2018-04-21 04:56:03 +07:00
|
|
|
if (unlikely(task->flags & PF_KTHREAD)) {
|
|
|
|
*ruid = GLOBAL_ROOT_UID;
|
|
|
|
*rgid = GLOBAL_ROOT_GID;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2017-01-03 04:23:11 +07:00
|
|
|
/* Default to the tasks effective ownership */
|
|
|
|
rcu_read_lock();
|
|
|
|
cred = __task_cred(task);
|
|
|
|
uid = cred->euid;
|
|
|
|
gid = cred->egid;
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Before the /proc/pid/status file was created the only way to read
|
|
|
|
* the effective uid of a /process was to stat /proc/pid. Reading
|
|
|
|
* /proc/pid/status is slow enough that procps and other packages
|
|
|
|
* kept stating /proc/pid. To keep the rules in /proc simple I have
|
|
|
|
* made this apply to all per process world readable and executable
|
|
|
|
* directories.
|
|
|
|
*/
|
|
|
|
if (mode != (S_IFDIR|S_IRUGO|S_IXUGO)) {
|
|
|
|
struct mm_struct *mm;
|
|
|
|
task_lock(task);
|
|
|
|
mm = task->mm;
|
|
|
|
/* Make non-dumpable tasks owned by some root */
|
|
|
|
if (mm) {
|
|
|
|
if (get_dumpable(mm) != SUID_DUMP_USER) {
|
|
|
|
struct user_namespace *user_ns = mm->user_ns;
|
|
|
|
|
|
|
|
uid = make_kuid(user_ns, 0);
|
|
|
|
if (!uid_valid(uid))
|
|
|
|
uid = GLOBAL_ROOT_UID;
|
|
|
|
|
|
|
|
gid = make_kgid(user_ns, 0);
|
|
|
|
if (!gid_valid(gid))
|
|
|
|
gid = GLOBAL_ROOT_GID;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
uid = GLOBAL_ROOT_UID;
|
|
|
|
gid = GLOBAL_ROOT_GID;
|
|
|
|
}
|
|
|
|
task_unlock(task);
|
|
|
|
}
|
|
|
|
*ruid = uid;
|
|
|
|
*rgid = gid;
|
|
|
|
}
|
|
|
|
|
2016-11-11 04:18:28 +07:00
|
|
|
struct inode *proc_pid_make_inode(struct super_block * sb,
|
|
|
|
struct task_struct *task, umode_t mode)
|
2006-10-02 16:17:05 +07:00
|
|
|
{
|
|
|
|
struct inode * inode;
|
|
|
|
struct proc_inode *ei;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2006-10-02 16:17:05 +07:00
|
|
|
/* We need a new inode */
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2006-10-02 16:17:05 +07:00
|
|
|
inode = new_inode(sb);
|
|
|
|
if (!inode)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* Common stuff */
|
|
|
|
ei = PROC_I(inode);
|
2016-11-11 04:18:28 +07:00
|
|
|
inode->i_mode = mode;
|
2010-10-23 22:19:54 +07:00
|
|
|
inode->i_ino = get_next_ino();
|
2016-09-14 21:48:04 +07:00
|
|
|
inode->i_mtime = inode->i_atime = inode->i_ctime = current_time(inode);
|
2006-10-02 16:17:05 +07:00
|
|
|
inode->i_op = &proc_def_inode_operations;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* grab the reference to task.
|
|
|
|
*/
|
2006-10-02 16:18:59 +07:00
|
|
|
ei->pid = get_task_pid(task, PIDTYPE_PID);
|
2006-10-02 16:17:05 +07:00
|
|
|
if (!ei->pid)
|
|
|
|
goto out_unlock;
|
|
|
|
|
2017-01-03 04:23:11 +07:00
|
|
|
task_dump_owner(task, 0, &inode->i_uid, &inode->i_gid);
|
2006-10-02 16:17:05 +07:00
|
|
|
security_task_to_inode(task, inode);
|
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
out:
|
2006-10-02 16:17:05 +07:00
|
|
|
return inode;
|
|
|
|
|
|
|
|
out_unlock:
|
|
|
|
iput(inode);
|
|
|
|
return NULL;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31 23:46:22 +07:00
|
|
|
int pid_getattr(const struct path *path, struct kstat *stat,
|
|
|
|
u32 request_mask, unsigned int query_flags)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31 23:46:22 +07:00
|
|
|
struct inode *inode = d_inode(path->dentry);
|
2018-05-16 12:19:01 +07:00
|
|
|
struct pid_namespace *pid = proc_pid_ns(inode);
|
2006-10-02 16:17:05 +07:00
|
|
|
struct task_struct *task;
|
2008-11-14 06:39:19 +07:00
|
|
|
|
2006-10-02 16:17:05 +07:00
|
|
|
generic_fillattr(inode, stat);
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2012-02-09 23:48:21 +07:00
|
|
|
stat->uid = GLOBAL_ROOT_UID;
|
|
|
|
stat->gid = GLOBAL_ROOT_GID;
|
2018-06-08 07:10:07 +07:00
|
|
|
rcu_read_lock();
|
2006-10-02 16:17:05 +07:00
|
|
|
task = pid_task(proc_pid(inode), PIDTYPE_PID);
|
|
|
|
if (task) {
|
2017-02-25 06:00:23 +07:00
|
|
|
if (!has_pid_permissions(pid, task, HIDEPID_INVISIBLE)) {
|
procfs: add hidepid= and gid= mount options
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:11:31 +07:00
|
|
|
rcu_read_unlock();
|
|
|
|
/*
|
|
|
|
* This doesn't prevent learning whether PID exists,
|
|
|
|
* it only makes getattr() consistent with readdir().
|
|
|
|
*/
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
2017-01-03 04:23:11 +07:00
|
|
|
task_dump_owner(task, inode->i_mode, &stat->uid, &stat->gid);
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
2006-10-02 16:17:05 +07:00
|
|
|
rcu_read_unlock();
|
2005-06-23 14:09:43 +07:00
|
|
|
return 0;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/* dentry stuff */
|
|
|
|
|
|
|
|
/*
|
2018-05-03 08:26:16 +07:00
|
|
|
* Set <pid>/... inode ownership (can change due to setuid(), etc.)
|
|
|
|
*/
|
|
|
|
void pid_update_inode(struct task_struct *task, struct inode *inode)
|
|
|
|
{
|
|
|
|
task_dump_owner(task, inode->i_mode, &inode->i_uid, &inode->i_gid);
|
|
|
|
|
|
|
|
inode->i_mode &= ~(S_ISUID | S_ISGID);
|
|
|
|
security_task_to_inode(task, inode);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2005-04-17 05:20:36 +07:00
|
|
|
* Rewrite the inode's ownerships here because the owning task may have
|
|
|
|
* performed a setuid(), etc.
|
2006-06-26 14:25:55 +07:00
|
|
|
*
|
2005-04-17 05:20:36 +07:00
|
|
|
*/
|
2018-05-03 08:26:16 +07:00
|
|
|
static int pid_revalidate(struct dentry *dentry, unsigned int flags)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2011-01-07 13:49:57 +07:00
|
|
|
struct inode *inode;
|
|
|
|
struct task_struct *task;
|
2008-11-14 06:39:19 +07:00
|
|
|
|
2012-06-11 03:03:43 +07:00
|
|
|
if (flags & LOOKUP_RCU)
|
2011-01-07 13:49:57 +07:00
|
|
|
return -ECHILD;
|
|
|
|
|
2015-03-18 05:25:59 +07:00
|
|
|
inode = d_inode(dentry);
|
2011-01-07 13:49:57 +07:00
|
|
|
task = get_proc_task(inode);
|
|
|
|
|
2006-06-26 14:25:55 +07:00
|
|
|
if (task) {
|
2018-05-03 08:26:16 +07:00
|
|
|
pid_update_inode(task, inode);
|
2006-06-26 14:25:55 +07:00
|
|
|
put_task_struct(task);
|
2005-04-17 05:20:36 +07:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-01-24 06:55:39 +07:00
|
|
|
static inline bool proc_inode_is_dead(struct inode *inode)
|
|
|
|
{
|
|
|
|
return !proc_pid(inode)->tasks[PIDTYPE_PID].first;
|
|
|
|
}
|
|
|
|
|
2013-04-12 07:08:50 +07:00
|
|
|
int pid_delete_dentry(const struct dentry *dentry)
|
|
|
|
{
|
|
|
|
/* Is the task we represent dead?
|
|
|
|
* If so, then don't put the dentry on the lru list,
|
|
|
|
* kill it immediately.
|
|
|
|
*/
|
2015-03-18 05:25:59 +07:00
|
|
|
return proc_inode_is_dead(d_inode(dentry));
|
2013-04-12 07:08:50 +07:00
|
|
|
}
|
|
|
|
|
2010-03-08 07:41:34 +07:00
|
|
|
const struct dentry_operations pid_dentry_operations =
|
2006-10-02 16:17:05 +07:00
|
|
|
{
|
|
|
|
.d_revalidate = pid_revalidate,
|
|
|
|
.d_delete = pid_delete_dentry,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Lookups */
|
|
|
|
|
2006-10-02 16:18:57 +07:00
|
|
|
/*
|
|
|
|
* Fill a directory entry.
|
|
|
|
*
|
|
|
|
* If possible create the dcache entry and derive our inode number and
|
|
|
|
* file type from dcache entry.
|
|
|
|
*
|
|
|
|
* Since all of the proc inode numbers are dynamically generated, the inode
|
|
|
|
* numbers do not exist until the inode is cache. This means creating the
|
|
|
|
* the dcache entry in readdir is necessary to keep the inode numbers
|
|
|
|
* reported by readdir in sync with the inode numbers reported
|
|
|
|
* by stat.
|
|
|
|
*/
|
2013-05-16 23:07:31 +07:00
|
|
|
bool proc_fill_cache(struct file *file, struct dir_context *ctx,
|
2018-06-08 07:10:10 +07:00
|
|
|
const char *name, unsigned int len,
|
2007-05-08 14:26:15 +07:00
|
|
|
instantiate_t instantiate, struct task_struct *task, const void *ptr)
|
2006-10-02 16:18:49 +07:00
|
|
|
{
|
2013-05-16 23:07:31 +07:00
|
|
|
struct dentry *child, *dir = file->f_path.dentry;
|
2013-06-15 14:33:10 +07:00
|
|
|
struct qstr qname = QSTR_INIT(name, len);
|
2006-10-02 16:18:49 +07:00
|
|
|
struct inode *inode;
|
2018-05-03 20:21:05 +07:00
|
|
|
unsigned type = DT_UNKNOWN;
|
|
|
|
ino_t ino = 1;
|
2006-10-02 16:18:49 +07:00
|
|
|
|
2013-06-15 14:33:10 +07:00
|
|
|
child = d_hash_and_lookup(dir, &qname);
|
2006-10-02 16:18:49 +07:00
|
|
|
if (!child) {
|
2016-04-21 03:31:31 +07:00
|
|
|
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wq);
|
|
|
|
child = d_alloc_parallel(dir, &qname, &wq);
|
|
|
|
if (IS_ERR(child))
|
2013-06-15 14:33:10 +07:00
|
|
|
goto end_instantiate;
|
2016-04-21 03:31:31 +07:00
|
|
|
if (d_in_lookup(child)) {
|
2018-05-03 20:21:05 +07:00
|
|
|
struct dentry *res;
|
|
|
|
res = instantiate(child, task, ptr);
|
2016-04-21 03:31:31 +07:00
|
|
|
d_lookup_done(child);
|
2018-05-03 20:21:05 +07:00
|
|
|
if (unlikely(res)) {
|
|
|
|
dput(child);
|
|
|
|
child = res;
|
2018-06-08 12:17:11 +07:00
|
|
|
if (IS_ERR(child))
|
|
|
|
goto end_instantiate;
|
2016-04-21 03:31:31 +07:00
|
|
|
}
|
2006-10-02 16:18:49 +07:00
|
|
|
}
|
|
|
|
}
|
2015-03-18 05:25:59 +07:00
|
|
|
inode = d_inode(child);
|
2013-06-15 13:26:35 +07:00
|
|
|
ino = inode->i_ino;
|
|
|
|
type = inode->i_mode >> 12;
|
2006-10-02 16:18:49 +07:00
|
|
|
dput(child);
|
2018-06-08 12:17:11 +07:00
|
|
|
end_instantiate:
|
2013-05-16 23:07:31 +07:00
|
|
|
return dir_emit(ctx, name, len, ino, type);
|
2006-10-02 16:18:49 +07:00
|
|
|
}
|
|
|
|
|
2012-01-11 06:11:23 +07:00
|
|
|
/*
|
|
|
|
* dname_to_vma_addr - maps a dentry name into two unsigned longs
|
|
|
|
* which represent vma start and end addresses.
|
|
|
|
*/
|
|
|
|
static int dname_to_vma_addr(struct dentry *dentry,
|
|
|
|
unsigned long *start, unsigned long *end)
|
|
|
|
{
|
2018-02-07 06:36:59 +07:00
|
|
|
const char *str = dentry->d_name.name;
|
|
|
|
unsigned long long sval, eval;
|
|
|
|
unsigned int len;
|
|
|
|
|
2018-04-11 06:41:14 +07:00
|
|
|
if (str[0] == '0' && str[1] != '-')
|
|
|
|
return -EINVAL;
|
2018-02-07 06:36:59 +07:00
|
|
|
len = _parse_integer(str, 16, &sval);
|
|
|
|
if (len & KSTRTOX_OVERFLOW)
|
|
|
|
return -EINVAL;
|
|
|
|
if (sval != (unsigned long)sval)
|
|
|
|
return -EINVAL;
|
|
|
|
str += len;
|
|
|
|
|
|
|
|
if (*str != '-')
|
2012-01-11 06:11:23 +07:00
|
|
|
return -EINVAL;
|
2018-02-07 06:36:59 +07:00
|
|
|
str++;
|
|
|
|
|
2018-04-11 06:41:14 +07:00
|
|
|
if (str[0] == '0' && str[1])
|
|
|
|
return -EINVAL;
|
2018-02-07 06:36:59 +07:00
|
|
|
len = _parse_integer(str, 16, &eval);
|
|
|
|
if (len & KSTRTOX_OVERFLOW)
|
|
|
|
return -EINVAL;
|
|
|
|
if (eval != (unsigned long)eval)
|
|
|
|
return -EINVAL;
|
|
|
|
str += len;
|
|
|
|
|
|
|
|
if (*str != '\0')
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
*start = sval;
|
|
|
|
*end = eval;
|
2012-01-11 06:11:23 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-06-11 03:03:43 +07:00
|
|
|
static int map_files_d_revalidate(struct dentry *dentry, unsigned int flags)
|
2012-01-11 06:11:23 +07:00
|
|
|
{
|
|
|
|
unsigned long vm_start, vm_end;
|
|
|
|
bool exact_vma_exists = false;
|
|
|
|
struct mm_struct *mm = NULL;
|
|
|
|
struct task_struct *task;
|
|
|
|
struct inode *inode;
|
|
|
|
int status = 0;
|
|
|
|
|
2012-06-11 03:03:43 +07:00
|
|
|
if (flags & LOOKUP_RCU)
|
2012-01-11 06:11:23 +07:00
|
|
|
return -ECHILD;
|
|
|
|
|
2015-03-18 05:25:59 +07:00
|
|
|
inode = d_inode(dentry);
|
2012-01-11 06:11:23 +07:00
|
|
|
task = get_proc_task(inode);
|
|
|
|
if (!task)
|
|
|
|
goto out_notask;
|
|
|
|
|
ptrace: use fsuid, fsgid, effective creds for fs access checks
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.
To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.
The problem was that when a privileged task had temporarily dropped its
privileges, e.g. by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.
While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.
In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:
/proc/$pid/stat - uses the check for determining whether pointers
should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
directories that contain files with lax permissions, e.g. in
this scenario:
lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
drwx------ root root /root
drwxr-xr-x root root /root/foobar
-rw-r--r-- root root /root/foobar/secret
Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 06:00:04 +07:00
|
|
|
mm = mm_access(task, PTRACE_MODE_READ_FSCREDS);
|
2012-06-01 06:26:18 +07:00
|
|
|
if (IS_ERR_OR_NULL(mm))
|
2012-01-11 06:11:23 +07:00
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (!dname_to_vma_addr(dentry, &vm_start, &vm_end)) {
|
|
|
|
down_read(&mm->mmap_sem);
|
|
|
|
exact_vma_exists = !!find_exact_vma(mm, vm_start, vm_end);
|
|
|
|
up_read(&mm->mmap_sem);
|
|
|
|
}
|
|
|
|
|
|
|
|
mmput(mm);
|
|
|
|
|
|
|
|
if (exact_vma_exists) {
|
2017-01-03 04:23:11 +07:00
|
|
|
task_dump_owner(task, 0, &inode->i_uid, &inode->i_gid);
|
|
|
|
|
2012-01-11 06:11:23 +07:00
|
|
|
security_task_to_inode(task, inode);
|
|
|
|
status = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
put_task_struct(task);
|
|
|
|
|
|
|
|
out_notask:
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct dentry_operations tid_map_files_dentry_operations = {
|
|
|
|
.d_revalidate = map_files_d_revalidate,
|
|
|
|
.d_delete = pid_delete_dentry,
|
|
|
|
};
|
|
|
|
|
2015-11-17 22:20:54 +07:00
|
|
|
static int map_files_get_link(struct dentry *dentry, struct path *path)
|
2012-01-11 06:11:23 +07:00
|
|
|
{
|
|
|
|
unsigned long vm_start, vm_end;
|
|
|
|
struct vm_area_struct *vma;
|
|
|
|
struct task_struct *task;
|
|
|
|
struct mm_struct *mm;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = -ENOENT;
|
2015-03-18 05:25:59 +07:00
|
|
|
task = get_proc_task(d_inode(dentry));
|
2012-01-11 06:11:23 +07:00
|
|
|
if (!task)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
mm = get_task_mm(task);
|
|
|
|
put_task_struct(task);
|
|
|
|
if (!mm)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
rc = dname_to_vma_addr(dentry, &vm_start, &vm_end);
|
|
|
|
if (rc)
|
|
|
|
goto out_mmput;
|
|
|
|
|
2014-03-11 05:49:45 +07:00
|
|
|
rc = -ENOENT;
|
2012-01-11 06:11:23 +07:00
|
|
|
down_read(&mm->mmap_sem);
|
|
|
|
vma = find_exact_vma(mm, vm_start, vm_end);
|
|
|
|
if (vma && vma->vm_file) {
|
|
|
|
*path = vma->vm_file->f_path;
|
|
|
|
path_get(path);
|
|
|
|
rc = 0;
|
|
|
|
}
|
|
|
|
up_read(&mm->mmap_sem);
|
|
|
|
|
|
|
|
out_mmput:
|
|
|
|
mmput(mm);
|
|
|
|
out:
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct map_files_info {
|
2018-02-07 06:37:06 +07:00
|
|
|
unsigned long start;
|
|
|
|
unsigned long end;
|
2012-08-28 01:55:26 +07:00
|
|
|
fmode_t mode;
|
2012-01-11 06:11:23 +07:00
|
|
|
};
|
|
|
|
|
procfs: always expose /proc/<pid>/map_files/ and make it readable
Currently, /proc/<pid>/map_files/ is restricted to CAP_SYS_ADMIN, and is
only exposed if CONFIG_CHECKPOINT_RESTORE is set.
Each mapped file region gets a symlink in /proc/<pid>/map_files/
corresponding to the virtual address range at which it is mapped. The
symlinks work like the symlinks in /proc/<pid>/fd/, so you can follow them
to the backing file even if that backing file has been unlinked.
Currently, files which are mapped, unlinked, and closed are impossible to
stat() from userspace. Exposing /proc/<pid>/map_files/ closes this
functionality "hole".
Not being able to stat() such files makes noticing and explicitly
accounting for the space they use on the filesystem impossible. You can
work around this by summing up the space used by every file in the
filesystem and subtracting that total from what statfs() tells you, but
that obviously isn't great, and it becomes unworkable once your filesystem
becomes large enough.
This patch moves map_files/ out from behind CONFIG_CHECKPOINT_RESTORE, and
adjusts the permissions enforced on it as follows:
* proc_map_files_lookup()
* proc_map_files_readdir()
* map_files_d_revalidate()
Remove the CAP_SYS_ADMIN restriction, leaving only the current
restriction requiring PTRACE_MODE_READ. The information made
available to userspace by these three functions is already
available in /proc/PID/maps with MODE_READ, so I don't see any
reason to limit them any further (see below for more detail).
* proc_map_files_follow_link()
This stub has been added, and requires that the user have
CAP_SYS_ADMIN in order to follow the links in map_files/,
since there was concern on LKML both about the potential for
bypassing permissions on ancestor directories in the path to
files pointed to, and about what happens with more exotic
memory mappings created by some drivers (ie dma-buf).
In older versions of this patch, I changed every permission check in
the four functions above to enforce MODE_ATTACH instead of MODE_READ.
This was an oversight on my part, and after revisiting the discussion
it seems that nobody was concerned about anything outside of what is
made possible by ->follow_link(). So in this version, I've left the
checks for PTRACE_MODE_READ as-is.
[akpm@linux-foundation.org: catch up with concurrent proc_pid_follow_link() changes]
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 05:35:54 +07:00
|
|
|
/*
|
|
|
|
* Only allow CAP_SYS_ADMIN to follow the links, due to concerns about how the
|
|
|
|
* symlinks may be used to bypass permissions on ancestor directories in the
|
|
|
|
* path to the file in question.
|
|
|
|
*/
|
|
|
|
static const char *
|
2015-11-17 22:20:54 +07:00
|
|
|
proc_map_files_get_link(struct dentry *dentry,
|
2015-12-30 03:58:39 +07:00
|
|
|
struct inode *inode,
|
|
|
|
struct delayed_call *done)
|
procfs: always expose /proc/<pid>/map_files/ and make it readable
Currently, /proc/<pid>/map_files/ is restricted to CAP_SYS_ADMIN, and is
only exposed if CONFIG_CHECKPOINT_RESTORE is set.
Each mapped file region gets a symlink in /proc/<pid>/map_files/
corresponding to the virtual address range at which it is mapped. The
symlinks work like the symlinks in /proc/<pid>/fd/, so you can follow them
to the backing file even if that backing file has been unlinked.
Currently, files which are mapped, unlinked, and closed are impossible to
stat() from userspace. Exposing /proc/<pid>/map_files/ closes this
functionality "hole".
Not being able to stat() such files makes noticing and explicitly
accounting for the space they use on the filesystem impossible. You can
work around this by summing up the space used by every file in the
filesystem and subtracting that total from what statfs() tells you, but
that obviously isn't great, and it becomes unworkable once your filesystem
becomes large enough.
This patch moves map_files/ out from behind CONFIG_CHECKPOINT_RESTORE, and
adjusts the permissions enforced on it as follows:
* proc_map_files_lookup()
* proc_map_files_readdir()
* map_files_d_revalidate()
Remove the CAP_SYS_ADMIN restriction, leaving only the current
restriction requiring PTRACE_MODE_READ. The information made
available to userspace by these three functions is already
available in /proc/PID/maps with MODE_READ, so I don't see any
reason to limit them any further (see below for more detail).
* proc_map_files_follow_link()
This stub has been added, and requires that the user have
CAP_SYS_ADMIN in order to follow the links in map_files/,
since there was concern on LKML both about the potential for
bypassing permissions on ancestor directories in the path to
files pointed to, and about what happens with more exotic
memory mappings created by some drivers (ie dma-buf).
In older versions of this patch, I changed every permission check in
the four functions above to enforce MODE_ATTACH instead of MODE_READ.
This was an oversight on my part, and after revisiting the discussion
it seems that nobody was concerned about anything outside of what is
made possible by ->follow_link(). So in this version, I've left the
checks for PTRACE_MODE_READ as-is.
[akpm@linux-foundation.org: catch up with concurrent proc_pid_follow_link() changes]
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 05:35:54 +07:00
|
|
|
{
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
|
|
return ERR_PTR(-EPERM);
|
|
|
|
|
2015-12-30 03:58:39 +07:00
|
|
|
return proc_pid_get_link(dentry, inode, done);
|
procfs: always expose /proc/<pid>/map_files/ and make it readable
Currently, /proc/<pid>/map_files/ is restricted to CAP_SYS_ADMIN, and is
only exposed if CONFIG_CHECKPOINT_RESTORE is set.
Each mapped file region gets a symlink in /proc/<pid>/map_files/
corresponding to the virtual address range at which it is mapped. The
symlinks work like the symlinks in /proc/<pid>/fd/, so you can follow them
to the backing file even if that backing file has been unlinked.
Currently, files which are mapped, unlinked, and closed are impossible to
stat() from userspace. Exposing /proc/<pid>/map_files/ closes this
functionality "hole".
Not being able to stat() such files makes noticing and explicitly
accounting for the space they use on the filesystem impossible. You can
work around this by summing up the space used by every file in the
filesystem and subtracting that total from what statfs() tells you, but
that obviously isn't great, and it becomes unworkable once your filesystem
becomes large enough.
This patch moves map_files/ out from behind CONFIG_CHECKPOINT_RESTORE, and
adjusts the permissions enforced on it as follows:
* proc_map_files_lookup()
* proc_map_files_readdir()
* map_files_d_revalidate()
Remove the CAP_SYS_ADMIN restriction, leaving only the current
restriction requiring PTRACE_MODE_READ. The information made
available to userspace by these three functions is already
available in /proc/PID/maps with MODE_READ, so I don't see any
reason to limit them any further (see below for more detail).
* proc_map_files_follow_link()
This stub has been added, and requires that the user have
CAP_SYS_ADMIN in order to follow the links in map_files/,
since there was concern on LKML both about the potential for
bypassing permissions on ancestor directories in the path to
files pointed to, and about what happens with more exotic
memory mappings created by some drivers (ie dma-buf).
In older versions of this patch, I changed every permission check in
the four functions above to enforce MODE_ATTACH instead of MODE_READ.
This was an oversight on my part, and after revisiting the discussion
it seems that nobody was concerned about anything outside of what is
made possible by ->follow_link(). So in this version, I've left the
checks for PTRACE_MODE_READ as-is.
[akpm@linux-foundation.org: catch up with concurrent proc_pid_follow_link() changes]
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 05:35:54 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2015-11-17 22:20:54 +07:00
|
|
|
* Identical to proc_pid_link_inode_operations except for get_link()
|
procfs: always expose /proc/<pid>/map_files/ and make it readable
Currently, /proc/<pid>/map_files/ is restricted to CAP_SYS_ADMIN, and is
only exposed if CONFIG_CHECKPOINT_RESTORE is set.
Each mapped file region gets a symlink in /proc/<pid>/map_files/
corresponding to the virtual address range at which it is mapped. The
symlinks work like the symlinks in /proc/<pid>/fd/, so you can follow them
to the backing file even if that backing file has been unlinked.
Currently, files which are mapped, unlinked, and closed are impossible to
stat() from userspace. Exposing /proc/<pid>/map_files/ closes this
functionality "hole".
Not being able to stat() such files makes noticing and explicitly
accounting for the space they use on the filesystem impossible. You can
work around this by summing up the space used by every file in the
filesystem and subtracting that total from what statfs() tells you, but
that obviously isn't great, and it becomes unworkable once your filesystem
becomes large enough.
This patch moves map_files/ out from behind CONFIG_CHECKPOINT_RESTORE, and
adjusts the permissions enforced on it as follows:
* proc_map_files_lookup()
* proc_map_files_readdir()
* map_files_d_revalidate()
Remove the CAP_SYS_ADMIN restriction, leaving only the current
restriction requiring PTRACE_MODE_READ. The information made
available to userspace by these three functions is already
available in /proc/PID/maps with MODE_READ, so I don't see any
reason to limit them any further (see below for more detail).
* proc_map_files_follow_link()
This stub has been added, and requires that the user have
CAP_SYS_ADMIN in order to follow the links in map_files/,
since there was concern on LKML both about the potential for
bypassing permissions on ancestor directories in the path to
files pointed to, and about what happens with more exotic
memory mappings created by some drivers (ie dma-buf).
In older versions of this patch, I changed every permission check in
the four functions above to enforce MODE_ATTACH instead of MODE_READ.
This was an oversight on my part, and after revisiting the discussion
it seems that nobody was concerned about anything outside of what is
made possible by ->follow_link(). So in this version, I've left the
checks for PTRACE_MODE_READ as-is.
[akpm@linux-foundation.org: catch up with concurrent proc_pid_follow_link() changes]
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 05:35:54 +07:00
|
|
|
*/
|
|
|
|
static const struct inode_operations proc_map_files_link_inode_operations = {
|
|
|
|
.readlink = proc_pid_readlink,
|
2015-11-17 22:20:54 +07:00
|
|
|
.get_link = proc_map_files_get_link,
|
procfs: always expose /proc/<pid>/map_files/ and make it readable
Currently, /proc/<pid>/map_files/ is restricted to CAP_SYS_ADMIN, and is
only exposed if CONFIG_CHECKPOINT_RESTORE is set.
Each mapped file region gets a symlink in /proc/<pid>/map_files/
corresponding to the virtual address range at which it is mapped. The
symlinks work like the symlinks in /proc/<pid>/fd/, so you can follow them
to the backing file even if that backing file has been unlinked.
Currently, files which are mapped, unlinked, and closed are impossible to
stat() from userspace. Exposing /proc/<pid>/map_files/ closes this
functionality "hole".
Not being able to stat() such files makes noticing and explicitly
accounting for the space they use on the filesystem impossible. You can
work around this by summing up the space used by every file in the
filesystem and subtracting that total from what statfs() tells you, but
that obviously isn't great, and it becomes unworkable once your filesystem
becomes large enough.
This patch moves map_files/ out from behind CONFIG_CHECKPOINT_RESTORE, and
adjusts the permissions enforced on it as follows:
* proc_map_files_lookup()
* proc_map_files_readdir()
* map_files_d_revalidate()
Remove the CAP_SYS_ADMIN restriction, leaving only the current
restriction requiring PTRACE_MODE_READ. The information made
available to userspace by these three functions is already
available in /proc/PID/maps with MODE_READ, so I don't see any
reason to limit them any further (see below for more detail).
* proc_map_files_follow_link()
This stub has been added, and requires that the user have
CAP_SYS_ADMIN in order to follow the links in map_files/,
since there was concern on LKML both about the potential for
bypassing permissions on ancestor directories in the path to
files pointed to, and about what happens with more exotic
memory mappings created by some drivers (ie dma-buf).
In older versions of this patch, I changed every permission check in
the four functions above to enforce MODE_ATTACH instead of MODE_READ.
This was an oversight on my part, and after revisiting the discussion
it seems that nobody was concerned about anything outside of what is
made possible by ->follow_link(). So in this version, I've left the
checks for PTRACE_MODE_READ as-is.
[akpm@linux-foundation.org: catch up with concurrent proc_pid_follow_link() changes]
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 05:35:54 +07:00
|
|
|
.setattr = proc_setattr,
|
|
|
|
};
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
static struct dentry *
|
|
|
|
proc_map_files_instantiate(struct dentry *dentry,
|
2012-01-11 06:11:23 +07:00
|
|
|
struct task_struct *task, const void *ptr)
|
|
|
|
{
|
2012-08-28 01:55:26 +07:00
|
|
|
fmode_t mode = (fmode_t)(unsigned long)ptr;
|
2012-01-11 06:11:23 +07:00
|
|
|
struct proc_inode *ei;
|
|
|
|
struct inode *inode;
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
inode = proc_pid_make_inode(dentry->d_sb, task, S_IFLNK |
|
2016-11-11 04:18:28 +07:00
|
|
|
((mode & FMODE_READ ) ? S_IRUSR : 0) |
|
|
|
|
((mode & FMODE_WRITE) ? S_IWUSR : 0));
|
2012-01-11 06:11:23 +07:00
|
|
|
if (!inode)
|
2018-05-03 20:21:05 +07:00
|
|
|
return ERR_PTR(-ENOENT);
|
2012-01-11 06:11:23 +07:00
|
|
|
|
|
|
|
ei = PROC_I(inode);
|
2015-11-17 22:20:54 +07:00
|
|
|
ei->op.proc_get_link = map_files_get_link;
|
2012-01-11 06:11:23 +07:00
|
|
|
|
procfs: always expose /proc/<pid>/map_files/ and make it readable
Currently, /proc/<pid>/map_files/ is restricted to CAP_SYS_ADMIN, and is
only exposed if CONFIG_CHECKPOINT_RESTORE is set.
Each mapped file region gets a symlink in /proc/<pid>/map_files/
corresponding to the virtual address range at which it is mapped. The
symlinks work like the symlinks in /proc/<pid>/fd/, so you can follow them
to the backing file even if that backing file has been unlinked.
Currently, files which are mapped, unlinked, and closed are impossible to
stat() from userspace. Exposing /proc/<pid>/map_files/ closes this
functionality "hole".
Not being able to stat() such files makes noticing and explicitly
accounting for the space they use on the filesystem impossible. You can
work around this by summing up the space used by every file in the
filesystem and subtracting that total from what statfs() tells you, but
that obviously isn't great, and it becomes unworkable once your filesystem
becomes large enough.
This patch moves map_files/ out from behind CONFIG_CHECKPOINT_RESTORE, and
adjusts the permissions enforced on it as follows:
* proc_map_files_lookup()
* proc_map_files_readdir()
* map_files_d_revalidate()
Remove the CAP_SYS_ADMIN restriction, leaving only the current
restriction requiring PTRACE_MODE_READ. The information made
available to userspace by these three functions is already
available in /proc/PID/maps with MODE_READ, so I don't see any
reason to limit them any further (see below for more detail).
* proc_map_files_follow_link()
This stub has been added, and requires that the user have
CAP_SYS_ADMIN in order to follow the links in map_files/,
since there was concern on LKML both about the potential for
bypassing permissions on ancestor directories in the path to
files pointed to, and about what happens with more exotic
memory mappings created by some drivers (ie dma-buf).
In older versions of this patch, I changed every permission check in
the four functions above to enforce MODE_ATTACH instead of MODE_READ.
This was an oversight on my part, and after revisiting the discussion
it seems that nobody was concerned about anything outside of what is
made possible by ->follow_link(). So in this version, I've left the
checks for PTRACE_MODE_READ as-is.
[akpm@linux-foundation.org: catch up with concurrent proc_pid_follow_link() changes]
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 05:35:54 +07:00
|
|
|
inode->i_op = &proc_map_files_link_inode_operations;
|
2012-01-11 06:11:23 +07:00
|
|
|
inode->i_size = 64;
|
|
|
|
|
|
|
|
d_set_d_op(dentry, &tid_map_files_dentry_operations);
|
2018-05-03 20:21:05 +07:00
|
|
|
return d_splice_alias(inode, dentry);
|
2012-01-11 06:11:23 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct dentry *proc_map_files_lookup(struct inode *dir,
|
2012-06-11 04:13:09 +07:00
|
|
|
struct dentry *dentry, unsigned int flags)
|
2012-01-11 06:11:23 +07:00
|
|
|
{
|
|
|
|
unsigned long vm_start, vm_end;
|
|
|
|
struct vm_area_struct *vma;
|
|
|
|
struct task_struct *task;
|
2018-05-03 20:21:05 +07:00
|
|
|
struct dentry *result;
|
2012-01-11 06:11:23 +07:00
|
|
|
struct mm_struct *mm;
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
result = ERR_PTR(-ENOENT);
|
2012-01-11 06:11:23 +07:00
|
|
|
task = get_proc_task(dir);
|
|
|
|
if (!task)
|
|
|
|
goto out;
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
result = ERR_PTR(-EACCES);
|
ptrace: use fsuid, fsgid, effective creds for fs access checks
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.
To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.
The problem was that when a privileged task had temporarily dropped its
privileges, e.g. by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.
While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.
In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:
/proc/$pid/stat - uses the check for determining whether pointers
should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
directories that contain files with lax permissions, e.g. in
this scenario:
lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
drwx------ root root /root
drwxr-xr-x root root /root/foobar
-rw-r--r-- root root /root/foobar/secret
Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 06:00:04 +07:00
|
|
|
if (!ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS))
|
2012-01-11 06:11:23 +07:00
|
|
|
goto out_put_task;
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
result = ERR_PTR(-ENOENT);
|
2012-01-11 06:11:23 +07:00
|
|
|
if (dname_to_vma_addr(dentry, &vm_start, &vm_end))
|
2012-05-18 07:03:25 +07:00
|
|
|
goto out_put_task;
|
2012-01-11 06:11:23 +07:00
|
|
|
|
|
|
|
mm = get_task_mm(task);
|
|
|
|
if (!mm)
|
2012-05-18 07:03:25 +07:00
|
|
|
goto out_put_task;
|
2012-01-11 06:11:23 +07:00
|
|
|
|
|
|
|
down_read(&mm->mmap_sem);
|
|
|
|
vma = find_exact_vma(mm, vm_start, vm_end);
|
|
|
|
if (!vma)
|
|
|
|
goto out_no_vma;
|
|
|
|
|
2012-11-27 07:29:42 +07:00
|
|
|
if (vma->vm_file)
|
2018-05-03 20:21:05 +07:00
|
|
|
result = proc_map_files_instantiate(dentry, task,
|
2012-11-27 07:29:42 +07:00
|
|
|
(void *)(unsigned long)vma->vm_file->f_mode);
|
2012-01-11 06:11:23 +07:00
|
|
|
|
|
|
|
out_no_vma:
|
|
|
|
up_read(&mm->mmap_sem);
|
|
|
|
mmput(mm);
|
|
|
|
out_put_task:
|
|
|
|
put_task_struct(task);
|
|
|
|
out:
|
2018-05-03 20:21:05 +07:00
|
|
|
return result;
|
2012-01-11 06:11:23 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct inode_operations proc_map_files_inode_operations = {
|
|
|
|
.lookup = proc_map_files_lookup,
|
|
|
|
.permission = proc_fd_permission,
|
|
|
|
.setattr = proc_setattr,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
2013-05-16 23:07:31 +07:00
|
|
|
proc_map_files_readdir(struct file *file, struct dir_context *ctx)
|
2012-01-11 06:11:23 +07:00
|
|
|
{
|
|
|
|
struct vm_area_struct *vma;
|
|
|
|
struct task_struct *task;
|
|
|
|
struct mm_struct *mm;
|
2013-05-16 23:07:31 +07:00
|
|
|
unsigned long nr_files, pos, i;
|
|
|
|
struct flex_array *fa = NULL;
|
|
|
|
struct map_files_info info;
|
|
|
|
struct map_files_info *p;
|
2012-01-11 06:11:23 +07:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = -ENOENT;
|
2013-05-16 23:07:31 +07:00
|
|
|
task = get_proc_task(file_inode(file));
|
2012-01-11 06:11:23 +07:00
|
|
|
if (!task)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
ret = -EACCES;
|
ptrace: use fsuid, fsgid, effective creds for fs access checks
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.
To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.
The problem was that when a privileged task had temporarily dropped its
privileges, e.g. by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.
While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.
In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:
/proc/$pid/stat - uses the check for determining whether pointers
should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
directories that contain files with lax permissions, e.g. in
this scenario:
lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
drwx------ root root /root
drwxr-xr-x root root /root/foobar
-rw-r--r-- root root /root/foobar/secret
Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 06:00:04 +07:00
|
|
|
if (!ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS))
|
2012-01-11 06:11:23 +07:00
|
|
|
goto out_put_task;
|
|
|
|
|
|
|
|
ret = 0;
|
2013-05-16 23:07:31 +07:00
|
|
|
if (!dir_emit_dots(file, ctx))
|
|
|
|
goto out_put_task;
|
2012-01-11 06:11:23 +07:00
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
mm = get_task_mm(task);
|
|
|
|
if (!mm)
|
|
|
|
goto out_put_task;
|
|
|
|
down_read(&mm->mmap_sem);
|
2012-01-11 06:11:23 +07:00
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
nr_files = 0;
|
2012-01-11 06:11:23 +07:00
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
/*
|
|
|
|
* We need two passes here:
|
|
|
|
*
|
|
|
|
* 1) Collect vmas of mapped files with mmap_sem taken
|
|
|
|
* 2) Release mmap_sem and instantiate entries
|
|
|
|
*
|
|
|
|
* otherwise we get lockdep complained, since filldir()
|
|
|
|
* routine might require mmap_sem taken in might_fault().
|
|
|
|
*/
|
2012-01-11 06:11:23 +07:00
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
for (vma = mm->mmap, pos = 2; vma; vma = vma->vm_next) {
|
|
|
|
if (vma->vm_file && ++pos > ctx->pos)
|
|
|
|
nr_files++;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (nr_files) {
|
|
|
|
fa = flex_array_alloc(sizeof(info), nr_files,
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!fa || flex_array_prealloc(fa, 0, nr_files,
|
|
|
|
GFP_KERNEL)) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
if (fa)
|
|
|
|
flex_array_free(fa);
|
|
|
|
up_read(&mm->mmap_sem);
|
|
|
|
mmput(mm);
|
|
|
|
goto out_put_task;
|
2012-01-11 06:11:23 +07:00
|
|
|
}
|
2013-05-16 23:07:31 +07:00
|
|
|
for (i = 0, vma = mm->mmap, pos = 2; vma;
|
|
|
|
vma = vma->vm_next) {
|
|
|
|
if (!vma->vm_file)
|
|
|
|
continue;
|
|
|
|
if (++pos <= ctx->pos)
|
|
|
|
continue;
|
|
|
|
|
2018-02-07 06:37:06 +07:00
|
|
|
info.start = vma->vm_start;
|
|
|
|
info.end = vma->vm_end;
|
2013-05-16 23:07:31 +07:00
|
|
|
info.mode = vma->vm_file->f_mode;
|
|
|
|
if (flex_array_put(fa, i++, &info, GFP_KERNEL))
|
|
|
|
BUG();
|
2012-01-11 06:11:23 +07:00
|
|
|
}
|
|
|
|
}
|
2013-05-16 23:07:31 +07:00
|
|
|
up_read(&mm->mmap_sem);
|
2018-04-11 06:32:05 +07:00
|
|
|
mmput(mm);
|
2013-05-16 23:07:31 +07:00
|
|
|
|
|
|
|
for (i = 0; i < nr_files; i++) {
|
2018-02-07 06:37:06 +07:00
|
|
|
char buf[4 * sizeof(long) + 2]; /* max: %lx-%lx\0 */
|
|
|
|
unsigned int len;
|
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
p = flex_array_get(fa, i);
|
2018-02-07 06:37:06 +07:00
|
|
|
len = snprintf(buf, sizeof(buf), "%lx-%lx", p->start, p->end);
|
2013-05-16 23:07:31 +07:00
|
|
|
if (!proc_fill_cache(file, ctx,
|
2018-02-07 06:37:06 +07:00
|
|
|
buf, len,
|
2013-05-16 23:07:31 +07:00
|
|
|
proc_map_files_instantiate,
|
|
|
|
task,
|
|
|
|
(void *)(unsigned long)p->mode))
|
|
|
|
break;
|
|
|
|
ctx->pos++;
|
2012-01-11 06:11:23 +07:00
|
|
|
}
|
2013-05-16 23:07:31 +07:00
|
|
|
if (fa)
|
|
|
|
flex_array_free(fa);
|
2012-01-11 06:11:23 +07:00
|
|
|
|
|
|
|
out_put_task:
|
|
|
|
put_task_struct(task);
|
|
|
|
out:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_map_files_operations = {
|
|
|
|
.read = generic_read_dir,
|
2016-04-21 04:13:54 +07:00
|
|
|
.iterate_shared = proc_map_files_readdir,
|
|
|
|
.llseek = generic_file_llseek,
|
2012-01-11 06:11:23 +07:00
|
|
|
};
|
|
|
|
|
2017-01-21 12:09:08 +07:00
|
|
|
#if defined(CONFIG_CHECKPOINT_RESTORE) && defined(CONFIG_POSIX_TIMERS)
|
2013-03-11 16:12:45 +07:00
|
|
|
struct timers_private {
|
|
|
|
struct pid *pid;
|
|
|
|
struct task_struct *task;
|
|
|
|
struct sighand_struct *sighand;
|
2013-03-11 16:13:08 +07:00
|
|
|
struct pid_namespace *ns;
|
2013-03-11 16:12:45 +07:00
|
|
|
unsigned long flags;
|
|
|
|
};
|
|
|
|
|
|
|
|
static void *timers_start(struct seq_file *m, loff_t *pos)
|
|
|
|
{
|
|
|
|
struct timers_private *tp = m->private;
|
|
|
|
|
|
|
|
tp->task = get_pid_task(tp->pid, PIDTYPE_PID);
|
|
|
|
if (!tp->task)
|
|
|
|
return ERR_PTR(-ESRCH);
|
|
|
|
|
|
|
|
tp->sighand = lock_task_sighand(tp->task, &tp->flags);
|
|
|
|
if (!tp->sighand)
|
|
|
|
return ERR_PTR(-ESRCH);
|
|
|
|
|
|
|
|
return seq_list_start(&tp->task->signal->posix_timers, *pos);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void *timers_next(struct seq_file *m, void *v, loff_t *pos)
|
|
|
|
{
|
|
|
|
struct timers_private *tp = m->private;
|
|
|
|
return seq_list_next(v, &tp->task->signal->posix_timers, pos);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void timers_stop(struct seq_file *m, void *v)
|
|
|
|
{
|
|
|
|
struct timers_private *tp = m->private;
|
|
|
|
|
|
|
|
if (tp->sighand) {
|
|
|
|
unlock_task_sighand(tp->task, &tp->flags);
|
|
|
|
tp->sighand = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (tp->task) {
|
|
|
|
put_task_struct(tp->task);
|
|
|
|
tp->task = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int show_timer(struct seq_file *m, void *v)
|
|
|
|
{
|
|
|
|
struct k_itimer *timer;
|
2013-03-11 16:13:08 +07:00
|
|
|
struct timers_private *tp = m->private;
|
|
|
|
int notify;
|
2014-08-09 04:21:33 +07:00
|
|
|
static const char * const nstr[] = {
|
2013-03-11 16:13:08 +07:00
|
|
|
[SIGEV_SIGNAL] = "signal",
|
|
|
|
[SIGEV_NONE] = "none",
|
|
|
|
[SIGEV_THREAD] = "thread",
|
|
|
|
};
|
2013-03-11 16:12:45 +07:00
|
|
|
|
|
|
|
timer = list_entry((struct list_head *)v, struct k_itimer, list);
|
2013-03-11 16:13:08 +07:00
|
|
|
notify = timer->it_sigev_notify;
|
|
|
|
|
2013-03-11 16:12:45 +07:00
|
|
|
seq_printf(m, "ID: %d\n", timer->it_id);
|
2017-12-07 09:23:27 +07:00
|
|
|
seq_printf(m, "signal: %d/%px\n",
|
2015-04-16 06:18:17 +07:00
|
|
|
timer->sigq->info.si_signo,
|
|
|
|
timer->sigq->info.si_value.sival_ptr);
|
2013-03-11 16:13:08 +07:00
|
|
|
seq_printf(m, "notify: %s/%s.%d\n",
|
2015-04-16 06:18:17 +07:00
|
|
|
nstr[notify & ~SIGEV_THREAD_ID],
|
|
|
|
(notify & SIGEV_THREAD_ID) ? "tid" : "pid",
|
|
|
|
pid_nr_ns(timer->it_pid, tp->ns));
|
2013-05-17 05:12:03 +07:00
|
|
|
seq_printf(m, "ClockID: %d\n", timer->it_clock);
|
2013-03-11 16:12:45 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct seq_operations proc_timers_seq_ops = {
|
|
|
|
.start = timers_start,
|
|
|
|
.next = timers_next,
|
|
|
|
.stop = timers_stop,
|
|
|
|
.show = show_timer,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int proc_timers_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct timers_private *tp;
|
|
|
|
|
|
|
|
tp = __seq_open_private(file, &proc_timers_seq_ops,
|
|
|
|
sizeof(struct timers_private));
|
|
|
|
if (!tp)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
tp->pid = proc_pid(inode);
|
2018-05-16 12:19:01 +07:00
|
|
|
tp->ns = proc_pid_ns(inode);
|
2013-03-11 16:12:45 +07:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_timers_operations = {
|
|
|
|
.open = proc_timers_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = seq_release_private,
|
|
|
|
};
|
2016-03-18 04:20:57 +07:00
|
|
|
#endif
|
2012-01-11 06:11:23 +07:00
|
|
|
|
2016-03-18 04:20:54 +07:00
|
|
|
static ssize_t timerslack_ns_write(struct file *file, const char __user *buf,
|
|
|
|
size_t count, loff_t *offset)
|
|
|
|
{
|
|
|
|
struct inode *inode = file_inode(file);
|
|
|
|
struct task_struct *p;
|
|
|
|
u64 slack_ns;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = kstrtoull_from_user(buf, count, 10, &slack_ns);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
p = get_proc_task(inode);
|
|
|
|
if (!p)
|
|
|
|
return -ESRCH;
|
|
|
|
|
2016-10-08 07:02:33 +07:00
|
|
|
if (p != current) {
|
|
|
|
if (!capable(CAP_SYS_NICE)) {
|
|
|
|
count = -EPERM;
|
|
|
|
goto out;
|
|
|
|
}
|
2016-03-18 04:20:54 +07:00
|
|
|
|
2016-10-08 07:02:33 +07:00
|
|
|
err = security_task_setscheduler(p);
|
|
|
|
if (err) {
|
|
|
|
count = err;
|
|
|
|
goto out;
|
|
|
|
}
|
2016-10-08 07:02:29 +07:00
|
|
|
}
|
|
|
|
|
proc: relax /proc/<tid>/timerslack_ns capability requirements
When an interface to allow a task to change another tasks timerslack was
first proposed, it was suggested that something greater then
CAP_SYS_NICE would be needed, as a task could be delayed further then
what normally could be done with nice adjustments.
So CAP_SYS_PTRACE was adopted instead for what became the
/proc/<tid>/timerslack_ns interface. However, for Android (where this
feature originates), giving the system_server CAP_SYS_PTRACE would allow
it to observe and modify all tasks memory. This is considered too high
a privilege level for only needing to change the timerslack.
After some discussion, it was realized that a CAP_SYS_NICE process can
set a task as SCHED_FIFO, so they could fork some spinning processes and
set them all SCHED_FIFO 99, in effect delaying all other tasks for an
infinite amount of time.
So as a CAP_SYS_NICE task can already cause trouble for other tasks,
using it as a required capability for accessing and modifying
/proc/<tid>/timerslack_ns seems sufficient.
Thus, this patch loosens the capability requirements to CAP_SYS_NICE and
removes CAP_SYS_PTRACE, simplifying some of the code flow as well.
This is technically an ABI change, but as the feature just landed in
4.6, I suspect no one is yet using it.
Link: http://lkml.kernel.org/r/1469132667-17377-1-git-send-email-john.stultz@linaro.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Nick Kralevich <nnk@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Colin Cross <ccross@android.com>
Cc: Nick Kralevich <nnk@google.com>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Elliott Hughes <enh@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 07:02:26 +07:00
|
|
|
task_lock(p);
|
|
|
|
if (slack_ns == 0)
|
|
|
|
p->timer_slack_ns = p->default_timer_slack_ns;
|
|
|
|
else
|
|
|
|
p->timer_slack_ns = slack_ns;
|
|
|
|
task_unlock(p);
|
|
|
|
|
|
|
|
out:
|
2016-03-18 04:20:54 +07:00
|
|
|
put_task_struct(p);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int timerslack_ns_show(struct seq_file *m, void *v)
|
|
|
|
{
|
|
|
|
struct inode *inode = m->private;
|
|
|
|
struct task_struct *p;
|
proc: relax /proc/<tid>/timerslack_ns capability requirements
When an interface to allow a task to change another tasks timerslack was
first proposed, it was suggested that something greater then
CAP_SYS_NICE would be needed, as a task could be delayed further then
what normally could be done with nice adjustments.
So CAP_SYS_PTRACE was adopted instead for what became the
/proc/<tid>/timerslack_ns interface. However, for Android (where this
feature originates), giving the system_server CAP_SYS_PTRACE would allow
it to observe and modify all tasks memory. This is considered too high
a privilege level for only needing to change the timerslack.
After some discussion, it was realized that a CAP_SYS_NICE process can
set a task as SCHED_FIFO, so they could fork some spinning processes and
set them all SCHED_FIFO 99, in effect delaying all other tasks for an
infinite amount of time.
So as a CAP_SYS_NICE task can already cause trouble for other tasks,
using it as a required capability for accessing and modifying
/proc/<tid>/timerslack_ns seems sufficient.
Thus, this patch loosens the capability requirements to CAP_SYS_NICE and
removes CAP_SYS_PTRACE, simplifying some of the code flow as well.
This is technically an ABI change, but as the feature just landed in
4.6, I suspect no one is yet using it.
Link: http://lkml.kernel.org/r/1469132667-17377-1-git-send-email-john.stultz@linaro.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Nick Kralevich <nnk@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Colin Cross <ccross@android.com>
Cc: Nick Kralevich <nnk@google.com>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Elliott Hughes <enh@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 07:02:26 +07:00
|
|
|
int err = 0;
|
2016-03-18 04:20:54 +07:00
|
|
|
|
|
|
|
p = get_proc_task(inode);
|
|
|
|
if (!p)
|
|
|
|
return -ESRCH;
|
|
|
|
|
2016-10-08 07:02:33 +07:00
|
|
|
if (p != current) {
|
2016-03-18 04:20:54 +07:00
|
|
|
|
2016-10-08 07:02:33 +07:00
|
|
|
if (!capable(CAP_SYS_NICE)) {
|
|
|
|
err = -EPERM;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
err = security_task_getscheduler(p);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
}
|
2016-10-08 07:02:29 +07:00
|
|
|
|
proc: relax /proc/<tid>/timerslack_ns capability requirements
When an interface to allow a task to change another tasks timerslack was
first proposed, it was suggested that something greater then
CAP_SYS_NICE would be needed, as a task could be delayed further then
what normally could be done with nice adjustments.
So CAP_SYS_PTRACE was adopted instead for what became the
/proc/<tid>/timerslack_ns interface. However, for Android (where this
feature originates), giving the system_server CAP_SYS_PTRACE would allow
it to observe and modify all tasks memory. This is considered too high
a privilege level for only needing to change the timerslack.
After some discussion, it was realized that a CAP_SYS_NICE process can
set a task as SCHED_FIFO, so they could fork some spinning processes and
set them all SCHED_FIFO 99, in effect delaying all other tasks for an
infinite amount of time.
So as a CAP_SYS_NICE task can already cause trouble for other tasks,
using it as a required capability for accessing and modifying
/proc/<tid>/timerslack_ns seems sufficient.
Thus, this patch loosens the capability requirements to CAP_SYS_NICE and
removes CAP_SYS_PTRACE, simplifying some of the code flow as well.
This is technically an ABI change, but as the feature just landed in
4.6, I suspect no one is yet using it.
Link: http://lkml.kernel.org/r/1469132667-17377-1-git-send-email-john.stultz@linaro.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Nick Kralevich <nnk@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Colin Cross <ccross@android.com>
Cc: Nick Kralevich <nnk@google.com>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Elliott Hughes <enh@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 07:02:26 +07:00
|
|
|
task_lock(p);
|
|
|
|
seq_printf(m, "%llu\n", p->timer_slack_ns);
|
|
|
|
task_unlock(p);
|
|
|
|
|
|
|
|
out:
|
2016-03-18 04:20:54 +07:00
|
|
|
put_task_struct(p);
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int timerslack_ns_open(struct inode *inode, struct file *filp)
|
|
|
|
{
|
|
|
|
return single_open(filp, timerslack_ns_show, inode);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_pid_set_timerslack_ns_operations = {
|
|
|
|
.open = timerslack_ns_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.write = timerslack_ns_write,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = single_release,
|
|
|
|
};
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
static struct dentry *proc_pident_instantiate(struct dentry *dentry,
|
|
|
|
struct task_struct *task, const void *ptr)
|
2006-10-02 16:18:49 +07:00
|
|
|
{
|
2007-05-08 14:26:15 +07:00
|
|
|
const struct pid_entry *p = ptr;
|
2006-10-02 16:18:49 +07:00
|
|
|
struct inode *inode;
|
|
|
|
struct proc_inode *ei;
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
inode = proc_pid_make_inode(dentry->d_sb, task, p->mode);
|
2006-10-02 16:18:49 +07:00
|
|
|
if (!inode)
|
2018-05-03 20:21:05 +07:00
|
|
|
return ERR_PTR(-ENOENT);
|
2006-10-02 16:18:49 +07:00
|
|
|
|
|
|
|
ei = PROC_I(inode);
|
|
|
|
if (S_ISDIR(inode->i_mode))
|
2011-10-28 19:13:29 +07:00
|
|
|
set_nlink(inode, 2); /* Use getattr to fix if necessary */
|
2006-10-02 16:18:49 +07:00
|
|
|
if (p->iop)
|
|
|
|
inode->i_op = p->iop;
|
|
|
|
if (p->fop)
|
|
|
|
inode->i_fop = p->fop;
|
|
|
|
ei->op = p->op;
|
2018-05-03 08:26:16 +07:00
|
|
|
pid_update_inode(task, inode);
|
2011-01-07 13:49:55 +07:00
|
|
|
d_set_d_op(dentry, &pid_dentry_operations);
|
2018-05-03 20:21:05 +07:00
|
|
|
return d_splice_alias(inode, dentry);
|
2006-10-02 16:18:49 +07:00
|
|
|
}
|
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
static struct dentry *proc_pident_lookup(struct inode *dir,
|
|
|
|
struct dentry *dentry,
|
2007-05-08 14:26:15 +07:00
|
|
|
const struct pid_entry *ents,
|
2006-10-02 16:18:56 +07:00
|
|
|
unsigned int nents)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2006-06-26 14:25:55 +07:00
|
|
|
struct task_struct *task = get_proc_task(dir);
|
2007-05-08 14:26:15 +07:00
|
|
|
const struct pid_entry *p, *last;
|
2018-05-03 20:21:05 +07:00
|
|
|
struct dentry *res = ERR_PTR(-ENOENT);
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2006-06-26 14:25:55 +07:00
|
|
|
if (!task)
|
|
|
|
goto out_no_task;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2006-10-02 16:17:07 +07:00
|
|
|
/*
|
|
|
|
* Yes, it does not scale. And it should not. Don't add
|
|
|
|
* new entries into /proc/<tgid>/ without very good reasons.
|
|
|
|
*/
|
2016-12-13 07:45:28 +07:00
|
|
|
last = &ents[nents];
|
|
|
|
for (p = ents; p < last; p++) {
|
2005-04-17 05:20:36 +07:00
|
|
|
if (p->len != dentry->d_name.len)
|
|
|
|
continue;
|
2018-06-15 05:27:17 +07:00
|
|
|
if (!memcmp(dentry->d_name.name, p->name, p->len)) {
|
|
|
|
res = proc_pident_instantiate(dentry, task, p);
|
2005-04-17 05:20:36 +07:00
|
|
|
break;
|
2018-06-15 05:27:17 +07:00
|
|
|
}
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
2006-06-26 14:25:55 +07:00
|
|
|
put_task_struct(task);
|
|
|
|
out_no_task:
|
2018-05-03 20:21:05 +07:00
|
|
|
return res;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
static int proc_pident_readdir(struct file *file, struct dir_context *ctx,
|
2007-05-08 14:26:15 +07:00
|
|
|
const struct pid_entry *ents, unsigned int nents)
|
2006-10-02 16:17:05 +07:00
|
|
|
{
|
2013-05-16 23:07:31 +07:00
|
|
|
struct task_struct *task = get_proc_task(file_inode(file));
|
|
|
|
const struct pid_entry *p;
|
2006-10-02 16:17:05 +07:00
|
|
|
|
|
|
|
if (!task)
|
2013-05-16 23:07:31 +07:00
|
|
|
return -ENOENT;
|
2006-10-02 16:17:05 +07:00
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
if (!dir_emit_dots(file, ctx))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (ctx->pos >= nents + 2)
|
|
|
|
goto out;
|
2006-10-02 16:17:05 +07:00
|
|
|
|
2016-12-13 07:45:28 +07:00
|
|
|
for (p = ents + (ctx->pos - 2); p < ents + nents; p++) {
|
2013-05-16 23:07:31 +07:00
|
|
|
if (!proc_fill_cache(file, ctx, p->name, p->len,
|
|
|
|
proc_pident_instantiate, task, p))
|
|
|
|
break;
|
|
|
|
ctx->pos++;
|
|
|
|
}
|
2006-10-02 16:17:05 +07:00
|
|
|
out:
|
2006-10-02 16:18:49 +07:00
|
|
|
put_task_struct(task);
|
2013-05-16 23:07:31 +07:00
|
|
|
return 0;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2006-10-02 16:17:05 +07:00
|
|
|
#ifdef CONFIG_SECURITY
|
|
|
|
static ssize_t proc_pid_attr_read(struct file * file, char __user * buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct inode * inode = file_inode(file);
|
2007-03-12 23:17:58 +07:00
|
|
|
char *p = NULL;
|
2006-10-02 16:17:05 +07:00
|
|
|
ssize_t length;
|
|
|
|
struct task_struct *task = get_proc_task(inode);
|
|
|
|
|
|
|
|
if (!task)
|
2007-03-12 23:17:58 +07:00
|
|
|
return -ESRCH;
|
2006-10-02 16:17:05 +07:00
|
|
|
|
|
|
|
length = security_getprocattr(task,
|
2006-12-08 17:36:36 +07:00
|
|
|
(char*)file->f_path.dentry->d_name.name,
|
2007-03-12 23:17:58 +07:00
|
|
|
&p);
|
2006-10-02 16:17:05 +07:00
|
|
|
put_task_struct(task);
|
2007-03-12 23:17:58 +07:00
|
|
|
if (length > 0)
|
|
|
|
length = simple_read_from_buffer(buf, count, ppos, p, length);
|
|
|
|
kfree(p);
|
2006-10-02 16:17:05 +07:00
|
|
|
return length;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2006-10-02 16:17:05 +07:00
|
|
|
static ssize_t proc_pid_attr_write(struct file * file, const char __user * buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct inode * inode = file_inode(file);
|
2018-08-22 11:54:30 +07:00
|
|
|
struct task_struct *task;
|
2015-12-24 12:16:30 +07:00
|
|
|
void *page;
|
2018-08-22 11:54:30 +07:00
|
|
|
int rv;
|
2017-01-09 22:07:31 +07:00
|
|
|
|
2018-08-22 11:54:30 +07:00
|
|
|
rcu_read_lock();
|
|
|
|
task = pid_task(proc_pid(inode), PIDTYPE_PID);
|
|
|
|
if (!task) {
|
|
|
|
rcu_read_unlock();
|
|
|
|
return -ESRCH;
|
|
|
|
}
|
2017-01-09 22:07:31 +07:00
|
|
|
/* A task may only write its own attributes. */
|
2018-08-22 11:54:30 +07:00
|
|
|
if (current != task) {
|
|
|
|
rcu_read_unlock();
|
|
|
|
return -EACCES;
|
|
|
|
}
|
|
|
|
rcu_read_unlock();
|
2017-01-09 22:07:31 +07:00
|
|
|
|
2006-10-02 16:17:05 +07:00
|
|
|
if (count > PAGE_SIZE)
|
|
|
|
count = PAGE_SIZE;
|
|
|
|
|
|
|
|
/* No partial writes. */
|
|
|
|
if (*ppos != 0)
|
2018-08-22 11:54:30 +07:00
|
|
|
return -EINVAL;
|
2006-10-02 16:17:05 +07:00
|
|
|
|
2015-12-24 12:16:30 +07:00
|
|
|
page = memdup_user(buf, count);
|
|
|
|
if (IS_ERR(page)) {
|
2018-08-22 11:54:30 +07:00
|
|
|
rv = PTR_ERR(page);
|
2006-10-02 16:17:05 +07:00
|
|
|
goto out;
|
2015-12-24 12:16:30 +07:00
|
|
|
}
|
2006-10-02 16:17:05 +07:00
|
|
|
|
2009-05-08 19:55:27 +07:00
|
|
|
/* Guard against adverse ptrace interaction */
|
2018-08-22 11:54:30 +07:00
|
|
|
rv = mutex_lock_interruptible(¤t->signal->cred_guard_mutex);
|
|
|
|
if (rv < 0)
|
2009-05-08 19:55:27 +07:00
|
|
|
goto out_free;
|
|
|
|
|
2018-08-22 11:54:30 +07:00
|
|
|
rv = security_setprocattr(file->f_path.dentry->d_name.name, page, count);
|
2017-01-09 22:07:31 +07:00
|
|
|
mutex_unlock(¤t->signal->cred_guard_mutex);
|
2006-10-02 16:17:05 +07:00
|
|
|
out_free:
|
2015-12-24 12:16:30 +07:00
|
|
|
kfree(page);
|
2006-10-02 16:17:05 +07:00
|
|
|
out:
|
2018-08-22 11:54:30 +07:00
|
|
|
return rv;
|
2006-10-02 16:17:05 +07:00
|
|
|
}
|
|
|
|
|
2007-02-12 15:55:34 +07:00
|
|
|
static const struct file_operations proc_pid_attr_operations = {
|
2006-10-02 16:17:05 +07:00
|
|
|
.read = proc_pid_attr_read,
|
|
|
|
.write = proc_pid_attr_write,
|
2010-03-18 05:06:02 +07:00
|
|
|
.llseek = generic_file_llseek,
|
2006-10-02 16:17:05 +07:00
|
|
|
};
|
|
|
|
|
2007-05-08 14:26:15 +07:00
|
|
|
static const struct pid_entry attr_dir_stuff[] = {
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("current", S_IRUGO|S_IWUGO, proc_pid_attr_operations),
|
|
|
|
REG("prev", S_IRUGO, proc_pid_attr_operations),
|
|
|
|
REG("exec", S_IRUGO|S_IWUGO, proc_pid_attr_operations),
|
|
|
|
REG("fscreate", S_IRUGO|S_IWUGO, proc_pid_attr_operations),
|
|
|
|
REG("keycreate", S_IRUGO|S_IWUGO, proc_pid_attr_operations),
|
|
|
|
REG("sockcreate", S_IRUGO|S_IWUGO, proc_pid_attr_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
};
|
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
static int proc_attr_dir_readdir(struct file *file, struct dir_context *ctx)
|
2006-10-02 16:17:05 +07:00
|
|
|
{
|
2013-05-16 23:07:31 +07:00
|
|
|
return proc_pident_readdir(file, ctx,
|
|
|
|
attr_dir_stuff, ARRAY_SIZE(attr_dir_stuff));
|
2006-10-02 16:17:05 +07:00
|
|
|
}
|
|
|
|
|
2007-02-12 15:55:34 +07:00
|
|
|
static const struct file_operations proc_attr_dir_operations = {
|
2005-04-17 05:20:36 +07:00
|
|
|
.read = generic_read_dir,
|
2016-04-21 04:13:54 +07:00
|
|
|
.iterate_shared = proc_attr_dir_readdir,
|
|
|
|
.llseek = generic_file_llseek,
|
2005-04-17 05:20:36 +07:00
|
|
|
};
|
|
|
|
|
2006-10-02 16:18:50 +07:00
|
|
|
static struct dentry *proc_attr_dir_lookup(struct inode *dir,
|
2012-06-11 04:13:09 +07:00
|
|
|
struct dentry *dentry, unsigned int flags)
|
2006-10-02 16:17:05 +07:00
|
|
|
{
|
2006-10-02 16:18:56 +07:00
|
|
|
return proc_pident_lookup(dir, dentry,
|
|
|
|
attr_dir_stuff, ARRAY_SIZE(attr_dir_stuff));
|
2006-10-02 16:17:05 +07:00
|
|
|
}
|
|
|
|
|
2007-02-12 15:55:40 +07:00
|
|
|
static const struct inode_operations proc_attr_dir_inode_operations = {
|
2006-10-02 16:18:50 +07:00
|
|
|
.lookup = proc_attr_dir_lookup,
|
2006-06-26 14:25:55 +07:00
|
|
|
.getattr = pid_getattr,
|
2006-07-16 02:26:45 +07:00
|
|
|
.setattr = proc_setattr,
|
2005-04-17 05:20:36 +07:00
|
|
|
};
|
|
|
|
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
|
|
|
|
2009-12-16 07:47:37 +07:00
|
|
|
#ifdef CONFIG_ELF_CORE
|
2007-07-19 15:48:28 +07:00
|
|
|
static ssize_t proc_coredump_filter_read(struct file *file, char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
2013-01-24 05:07:38 +07:00
|
|
|
struct task_struct *task = get_proc_task(file_inode(file));
|
2007-07-19 15:48:28 +07:00
|
|
|
struct mm_struct *mm;
|
|
|
|
char buffer[PROC_NUMBUF];
|
|
|
|
size_t len;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
|
|
|
|
|
|
|
ret = 0;
|
|
|
|
mm = get_task_mm(task);
|
|
|
|
if (mm) {
|
|
|
|
len = snprintf(buffer, sizeof(buffer), "%08lx\n",
|
|
|
|
((mm->flags & MMF_DUMP_FILTER_MASK) >>
|
|
|
|
MMF_DUMP_FILTER_SHIFT));
|
|
|
|
mmput(mm);
|
|
|
|
ret = simple_read_from_buffer(buf, count, ppos, buffer, len);
|
|
|
|
}
|
|
|
|
|
|
|
|
put_task_struct(task);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t proc_coredump_filter_write(struct file *file,
|
|
|
|
const char __user *buf,
|
|
|
|
size_t count,
|
|
|
|
loff_t *ppos)
|
|
|
|
{
|
|
|
|
struct task_struct *task;
|
|
|
|
struct mm_struct *mm;
|
|
|
|
unsigned int val;
|
|
|
|
int ret;
|
|
|
|
int i;
|
|
|
|
unsigned long mask;
|
|
|
|
|
2015-09-10 05:36:59 +07:00
|
|
|
ret = kstrtouint_from_user(buf, count, 0, &val);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
2007-07-19 15:48:28 +07:00
|
|
|
|
|
|
|
ret = -ESRCH;
|
2013-01-24 05:07:38 +07:00
|
|
|
task = get_proc_task(file_inode(file));
|
2007-07-19 15:48:28 +07:00
|
|
|
if (!task)
|
|
|
|
goto out_no_task;
|
|
|
|
|
|
|
|
mm = get_task_mm(task);
|
|
|
|
if (!mm)
|
|
|
|
goto out_no_mm;
|
2015-12-19 05:22:01 +07:00
|
|
|
ret = 0;
|
2007-07-19 15:48:28 +07:00
|
|
|
|
|
|
|
for (i = 0, mask = 1; i < MMF_DUMP_FILTER_BITS; i++, mask <<= 1) {
|
|
|
|
if (val & mask)
|
|
|
|
set_bit(i + MMF_DUMP_FILTER_SHIFT, &mm->flags);
|
|
|
|
else
|
|
|
|
clear_bit(i + MMF_DUMP_FILTER_SHIFT, &mm->flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
mmput(mm);
|
|
|
|
out_no_mm:
|
|
|
|
put_task_struct(task);
|
|
|
|
out_no_task:
|
2015-09-10 05:36:59 +07:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
return count;
|
2007-07-19 15:48:28 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_coredump_filter_operations = {
|
|
|
|
.read = proc_coredump_filter_read,
|
|
|
|
.write = proc_coredump_filter_write,
|
2010-03-18 05:06:02 +07:00
|
|
|
.llseek = generic_file_llseek,
|
2007-07-19 15:48:28 +07:00
|
|
|
};
|
|
|
|
#endif
|
|
|
|
|
2006-12-10 17:19:48 +07:00
|
|
|
#ifdef CONFIG_TASK_IO_ACCOUNTING
|
2014-08-09 04:21:50 +07:00
|
|
|
static int do_io_accounting(struct task_struct *task, struct seq_file *m, int whole)
|
2008-07-25 15:48:49 +07:00
|
|
|
{
|
2008-07-28 05:48:12 +07:00
|
|
|
struct task_io_accounting acct = task->ioac;
|
2008-07-27 22:29:15 +07:00
|
|
|
unsigned long flags;
|
2011-07-27 06:08:38 +07:00
|
|
|
int result;
|
2008-07-27 22:29:15 +07:00
|
|
|
|
2011-07-27 06:08:38 +07:00
|
|
|
result = mutex_lock_killable(&task->signal->cred_guard_mutex);
|
|
|
|
if (result)
|
|
|
|
return result;
|
|
|
|
|
ptrace: use fsuid, fsgid, effective creds for fs access checks
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.
To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.
The problem was that when a privileged task had temporarily dropped its
privileges, e.g. by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.
While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.
In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:
/proc/$pid/stat - uses the check for determining whether pointers
should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
directories that contain files with lax permissions, e.g. in
this scenario:
lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
drwx------ root root /root
drwxr-xr-x root root /root/foobar
-rw-r--r-- root root /root/foobar/secret
Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 06:00:04 +07:00
|
|
|
if (!ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS)) {
|
2011-07-27 06:08:38 +07:00
|
|
|
result = -EACCES;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
2011-06-24 19:08:38 +07:00
|
|
|
|
2008-07-27 22:29:15 +07:00
|
|
|
if (whole && lock_task_sighand(task, &flags)) {
|
|
|
|
struct task_struct *t = task;
|
|
|
|
|
|
|
|
task_io_accounting_add(&acct, &task->signal->ioac);
|
|
|
|
while_each_thread(task, t)
|
|
|
|
task_io_accounting_add(&acct, &t->ioac);
|
|
|
|
|
|
|
|
unlock_task_sighand(task, &flags);
|
2008-07-25 15:48:49 +07:00
|
|
|
}
|
2015-04-16 06:18:17 +07:00
|
|
|
seq_printf(m,
|
|
|
|
"rchar: %llu\n"
|
|
|
|
"wchar: %llu\n"
|
|
|
|
"syscr: %llu\n"
|
|
|
|
"syscw: %llu\n"
|
|
|
|
"read_bytes: %llu\n"
|
|
|
|
"write_bytes: %llu\n"
|
|
|
|
"cancelled_write_bytes: %llu\n",
|
|
|
|
(unsigned long long)acct.rchar,
|
|
|
|
(unsigned long long)acct.wchar,
|
|
|
|
(unsigned long long)acct.syscr,
|
|
|
|
(unsigned long long)acct.syscw,
|
|
|
|
(unsigned long long)acct.read_bytes,
|
|
|
|
(unsigned long long)acct.write_bytes,
|
|
|
|
(unsigned long long)acct.cancelled_write_bytes);
|
|
|
|
result = 0;
|
|
|
|
|
2011-07-27 06:08:38 +07:00
|
|
|
out_unlock:
|
|
|
|
mutex_unlock(&task->signal->cred_guard_mutex);
|
|
|
|
return result;
|
2008-07-25 15:48:49 +07:00
|
|
|
}
|
|
|
|
|
2014-08-09 04:21:50 +07:00
|
|
|
static int proc_tid_io_accounting(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
2008-07-25 15:48:49 +07:00
|
|
|
{
|
2014-08-09 04:21:50 +07:00
|
|
|
return do_io_accounting(task, m, 0);
|
2006-12-10 17:19:48 +07:00
|
|
|
}
|
2008-07-25 15:48:49 +07:00
|
|
|
|
2014-08-09 04:21:50 +07:00
|
|
|
static int proc_tgid_io_accounting(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
2008-07-25 15:48:49 +07:00
|
|
|
{
|
2014-08-09 04:21:50 +07:00
|
|
|
return do_io_accounting(task, m, 1);
|
2008-07-25 15:48:49 +07:00
|
|
|
}
|
|
|
|
#endif /* CONFIG_TASK_IO_ACCOUNTING */
|
2006-12-10 17:19:48 +07:00
|
|
|
|
2011-11-17 15:11:58 +07:00
|
|
|
#ifdef CONFIG_USER_NS
|
|
|
|
static int proc_id_map_open(struct inode *inode, struct file *file,
|
2014-08-09 04:21:22 +07:00
|
|
|
const struct seq_operations *seq_ops)
|
2011-11-17 15:11:58 +07:00
|
|
|
{
|
|
|
|
struct user_namespace *ns = NULL;
|
|
|
|
struct task_struct *task;
|
|
|
|
struct seq_file *seq;
|
|
|
|
int ret = -EINVAL;
|
|
|
|
|
|
|
|
task = get_proc_task(inode);
|
|
|
|
if (task) {
|
|
|
|
rcu_read_lock();
|
|
|
|
ns = get_user_ns(task_cred_xxx(task, user_ns));
|
|
|
|
rcu_read_unlock();
|
|
|
|
put_task_struct(task);
|
|
|
|
}
|
|
|
|
if (!ns)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
ret = seq_open(file, seq_ops);
|
|
|
|
if (ret)
|
|
|
|
goto err_put_ns;
|
|
|
|
|
|
|
|
seq = file->private_data;
|
|
|
|
seq->private = ns;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
err_put_ns:
|
|
|
|
put_user_ns(ns);
|
|
|
|
err:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int proc_id_map_release(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct seq_file *seq = file->private_data;
|
|
|
|
struct user_namespace *ns = seq->private;
|
|
|
|
put_user_ns(ns);
|
|
|
|
return seq_release(inode, file);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int proc_uid_map_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
return proc_id_map_open(inode, file, &proc_uid_seq_operations);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int proc_gid_map_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
return proc_id_map_open(inode, file, &proc_gid_seq_operations);
|
|
|
|
}
|
|
|
|
|
2012-08-30 15:24:05 +07:00
|
|
|
static int proc_projid_map_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
return proc_id_map_open(inode, file, &proc_projid_seq_operations);
|
|
|
|
}
|
|
|
|
|
2011-11-17 15:11:58 +07:00
|
|
|
static const struct file_operations proc_uid_map_operations = {
|
|
|
|
.open = proc_uid_map_open,
|
|
|
|
.write = proc_uid_map_write,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = proc_id_map_release,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct file_operations proc_gid_map_operations = {
|
|
|
|
.open = proc_gid_map_open,
|
|
|
|
.write = proc_gid_map_write,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = proc_id_map_release,
|
|
|
|
};
|
2012-08-30 15:24:05 +07:00
|
|
|
|
|
|
|
static const struct file_operations proc_projid_map_operations = {
|
|
|
|
.open = proc_projid_map_open,
|
|
|
|
.write = proc_projid_map_write,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = proc_id_map_release,
|
|
|
|
};
|
2014-12-03 01:27:26 +07:00
|
|
|
|
|
|
|
static int proc_setgroups_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct user_namespace *ns = NULL;
|
|
|
|
struct task_struct *task;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = -ESRCH;
|
|
|
|
task = get_proc_task(inode);
|
|
|
|
if (task) {
|
|
|
|
rcu_read_lock();
|
|
|
|
ns = get_user_ns(task_cred_xxx(task, user_ns));
|
|
|
|
rcu_read_unlock();
|
|
|
|
put_task_struct(task);
|
|
|
|
}
|
|
|
|
if (!ns)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
|
|
ret = -EACCES;
|
|
|
|
if (!ns_capable(ns, CAP_SYS_ADMIN))
|
|
|
|
goto err_put_ns;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = single_open(file, &proc_setgroups_show, ns);
|
|
|
|
if (ret)
|
|
|
|
goto err_put_ns;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
err_put_ns:
|
|
|
|
put_user_ns(ns);
|
|
|
|
err:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int proc_setgroups_release(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct seq_file *seq = file->private_data;
|
|
|
|
struct user_namespace *ns = seq->private;
|
|
|
|
int ret = single_release(inode, file);
|
|
|
|
put_user_ns(ns);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations proc_setgroups_operations = {
|
|
|
|
.open = proc_setgroups_open,
|
|
|
|
.write = proc_setgroups_write,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = proc_setgroups_release,
|
|
|
|
};
|
2011-11-17 15:11:58 +07:00
|
|
|
#endif /* CONFIG_USER_NS */
|
|
|
|
|
2008-10-06 06:11:58 +07:00
|
|
|
static int proc_pid_personality(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
|
|
|
{
|
2011-03-24 02:52:50 +07:00
|
|
|
int err = lock_trace(task);
|
|
|
|
if (!err) {
|
|
|
|
seq_printf(m, "%08x\n", task->personality);
|
|
|
|
unlock_trace(task);
|
|
|
|
}
|
|
|
|
return err;
|
2008-10-06 06:11:58 +07:00
|
|
|
}
|
|
|
|
|
2017-02-14 08:42:41 +07:00
|
|
|
#ifdef CONFIG_LIVEPATCH
|
|
|
|
static int proc_pid_patch_state(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
|
|
|
{
|
|
|
|
seq_printf(m, "%d\n", task->patch_state);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_LIVEPATCH */
|
|
|
|
|
2018-08-17 05:17:01 +07:00
|
|
|
#ifdef CONFIG_STACKLEAK_METRICS
|
|
|
|
static int proc_stack_depth(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
|
|
|
{
|
|
|
|
unsigned long prev_depth = THREAD_SIZE -
|
|
|
|
(task->prev_lowest_stack & (THREAD_SIZE - 1));
|
|
|
|
unsigned long depth = THREAD_SIZE -
|
|
|
|
(task->lowest_stack & (THREAD_SIZE - 1));
|
|
|
|
|
|
|
|
seq_printf(m, "previous stack depth: %lu\nstack depth: %lu\n",
|
|
|
|
prev_depth, depth);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_STACKLEAK_METRICS */
|
|
|
|
|
2006-10-02 16:17:05 +07:00
|
|
|
/*
|
|
|
|
* Thread groups
|
|
|
|
*/
|
2007-02-12 15:55:34 +07:00
|
|
|
static const struct file_operations proc_task_operations;
|
2007-02-12 15:55:40 +07:00
|
|
|
static const struct inode_operations proc_task_inode_operations;
|
2006-10-02 16:17:07 +07:00
|
|
|
|
2007-05-08 14:26:15 +07:00
|
|
|
static const struct pid_entry tgid_base_stuff[] = {
|
2008-11-10 05:32:52 +07:00
|
|
|
DIR("task", S_IRUGO|S_IXUGO, proc_task_inode_operations, proc_task_operations),
|
|
|
|
DIR("fd", S_IRUSR|S_IXUSR, proc_fd_inode_operations, proc_fd_operations),
|
2012-01-11 06:11:23 +07:00
|
|
|
DIR("map_files", S_IRUSR|S_IXUSR, proc_map_files_inode_operations, proc_map_files_operations),
|
2008-11-10 05:32:52 +07:00
|
|
|
DIR("fdinfo", S_IRUSR|S_IXUSR, proc_fdinfo_inode_operations, proc_fdinfo_operations),
|
2010-03-08 07:41:34 +07:00
|
|
|
DIR("ns", S_IRUSR|S_IXUGO, proc_ns_dir_inode_operations, proc_ns_dir_operations),
|
2008-03-12 08:03:35 +07:00
|
|
|
#ifdef CONFIG_NET
|
2008-11-10 05:32:52 +07:00
|
|
|
DIR("net", S_IRUGO|S_IXUGO, proc_net_inode_operations, proc_net_operations),
|
2008-03-12 08:03:35 +07:00
|
|
|
#endif
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("environ", S_IRUSR, proc_environ_operations),
|
2016-10-06 05:43:43 +07:00
|
|
|
REG("auxv", S_IRUSR, proc_auxv_operations),
|
2008-11-10 05:32:52 +07:00
|
|
|
ONE("status", S_IRUGO, proc_pid_status),
|
2014-04-08 05:38:36 +07:00
|
|
|
ONE("personality", S_IRUSR, proc_pid_personality),
|
2014-08-09 04:21:37 +07:00
|
|
|
ONE("limits", S_IRUGO, proc_pid_limits),
|
2007-07-09 23:52:00 +07:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations),
|
sched: Add 'autogroup' scheduling feature: automated per session task groups
A recurring complaint from CFS users is that parallel kbuild has
a negative impact on desktop interactivity. This patch
implements an idea from Linus, to automatically create task
groups. Currently, only per session autogroups are implemented,
but the patch leaves the way open for enhancement.
Implementation: each task's signal struct contains an inherited
pointer to a refcounted autogroup struct containing a task group
pointer, the default for all tasks pointing to the
init_task_group. When a task calls setsid(), a new task group
is created, the process is moved into the new task group, and a
reference to the preveious task group is dropped. Child
processes inherit this task group thereafter, and increase it's
refcount. When the last thread of a process exits, the
process's reference is dropped, such that when the last process
referencing an autogroup exits, the autogroup is destroyed.
At runqueue selection time, IFF a task has no cgroup assignment,
its current autogroup is used.
Autogroup bandwidth is controllable via setting it's nice level
through the proc filesystem:
cat /proc/<pid>/autogroup
Displays the task's group and the group's nice level.
echo <nice level> > /proc/<pid>/autogroup
Sets the task group's shares to the weight of nice <level> task.
Setting nice level is rate limited for !admin users due to the
abuse risk of task group locking.
The feature is enabled from boot by default if
CONFIG_SCHED_AUTOGROUP=y is selected, but can be disabled via
the boot option noautogroup, and can also be turned on/off on
the fly via:
echo [01] > /proc/sys/kernel/sched_autogroup_enabled
... which will automatically move tasks to/from the root task group.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
[ Removed the task_group_path() debug code, and fixed !EVENTFD build failure. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290281700.28711.9.camel@maggy.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-30 20:18:03 +07:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_SCHED_AUTOGROUP
|
|
|
|
REG("autogroup", S_IRUGO|S_IWUSR, proc_pid_sched_autogroup_operations),
|
2008-07-26 09:46:00 +07:00
|
|
|
#endif
|
2009-12-15 09:00:05 +07:00
|
|
|
REG("comm", S_IRUGO|S_IWUSR, proc_pid_set_comm_operations),
|
2008-07-26 09:46:00 +07:00
|
|
|
#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
|
2014-08-09 04:21:39 +07:00
|
|
|
ONE("syscall", S_IRUSR, proc_pid_syscall),
|
2007-07-09 23:52:00 +07:00
|
|
|
#endif
|
2015-06-26 05:00:54 +07:00
|
|
|
REG("cmdline", S_IRUGO, proc_pid_cmdline_ops),
|
2008-11-10 05:32:52 +07:00
|
|
|
ONE("stat", S_IRUGO, proc_tgid_stat),
|
|
|
|
ONE("statm", S_IRUGO, proc_pid_statm),
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:04 +07:00
|
|
|
REG("maps", S_IRUGO, proc_pid_maps_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
#ifdef CONFIG_NUMA
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:04 +07:00
|
|
|
REG("numa_maps", S_IRUGO, proc_pid_numa_maps_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("mem", S_IRUSR|S_IWUSR, proc_mem_operations),
|
|
|
|
LNK("cwd", proc_cwd_link),
|
|
|
|
LNK("root", proc_root_link),
|
|
|
|
LNK("exe", proc_exe_link),
|
|
|
|
REG("mounts", S_IRUGO, proc_mounts_operations),
|
|
|
|
REG("mountinfo", S_IRUGO, proc_mountinfo_operations),
|
|
|
|
REG("mountstats", S_IRUSR, proc_mountstats_operations),
|
2008-02-05 13:29:07 +07:00
|
|
|
#ifdef CONFIG_PROC_PAGE_MONITOR
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("clear_refs", S_IWUSR, proc_clear_refs_operations),
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:04 +07:00
|
|
|
REG("smaps", S_IRUGO, proc_pid_smaps_operations),
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 06:25:08 +07:00
|
|
|
REG("smaps_rollup", S_IRUGO, proc_pid_smaps_rollup_operations),
|
2014-04-08 05:38:38 +07:00
|
|
|
REG("pagemap", S_IRUSR, proc_pagemap_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_SECURITY
|
2008-11-10 05:32:52 +07:00
|
|
|
DIR("attr", S_IRUGO|S_IXUGO, proc_attr_dir_inode_operations, proc_attr_dir_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_KALLSYMS
|
2014-08-09 04:21:44 +07:00
|
|
|
ONE("wchan", S_IRUGO, proc_pid_wchan),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2008-11-10 15:26:08 +07:00
|
|
|
#ifdef CONFIG_STACKTRACE
|
2014-04-08 05:38:36 +07:00
|
|
|
ONE("stack", S_IRUSR, proc_pid_stack),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2015-06-30 16:06:03 +07:00
|
|
|
#ifdef CONFIG_SCHED_INFO
|
2014-08-09 04:21:46 +07:00
|
|
|
ONE("schedstat", S_IRUGO, proc_pid_schedstat),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2008-01-26 03:08:34 +07:00
|
|
|
#ifdef CONFIG_LATENCYTOP
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("latency", S_IRUGO, proc_lstats_operations),
|
2008-01-26 03:08:34 +07:00
|
|
|
#endif
|
2007-10-19 13:39:39 +07:00
|
|
|
#ifdef CONFIG_PROC_PID_CPUSET
|
2014-09-18 15:03:36 +07:00
|
|
|
ONE("cpuset", S_IRUGO, proc_cpuset_show),
|
2007-10-19 13:39:35 +07:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_CGROUPS
|
2014-09-18 15:03:15 +07:00
|
|
|
ONE("cgroup", S_IRUGO, proc_cgroup_show),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2014-08-09 04:21:48 +07:00
|
|
|
ONE("oom_score", S_IRUGO, proc_oom_score),
|
2012-11-13 08:53:04 +07:00
|
|
|
REG("oom_adj", S_IRUGO|S_IWUSR, proc_oom_adj_operations),
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
#ifdef CONFIG_AUDITSYSCALL
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("loginuid", S_IWUSR|S_IRUGO, proc_loginuid_operations),
|
|
|
|
REG("sessionid", S_IRUGO, proc_sessionid_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2006-12-08 17:39:47 +07:00
|
|
|
#ifdef CONFIG_FAULT_INJECTION
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("make-it-fail", S_IRUGO|S_IWUSR, proc_fault_inject_operations),
|
2017-07-15 04:50:00 +07:00
|
|
|
REG("fail-nth", 0644, proc_fail_nth_operations),
|
2006-12-08 17:39:47 +07:00
|
|
|
#endif
|
2009-12-16 07:47:37 +07:00
|
|
|
#ifdef CONFIG_ELF_CORE
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("coredump_filter", S_IRUGO|S_IWUSR, proc_coredump_filter_operations),
|
2007-07-19 15:48:28 +07:00
|
|
|
#endif
|
2006-12-10 17:19:48 +07:00
|
|
|
#ifdef CONFIG_TASK_IO_ACCOUNTING
|
2014-08-09 04:21:50 +07:00
|
|
|
ONE("io", S_IRUSR, proc_tgid_io_accounting),
|
2006-12-10 17:19:48 +07:00
|
|
|
#endif
|
2011-11-17 15:11:58 +07:00
|
|
|
#ifdef CONFIG_USER_NS
|
|
|
|
REG("uid_map", S_IRUGO|S_IWUSR, proc_uid_map_operations),
|
|
|
|
REG("gid_map", S_IRUGO|S_IWUSR, proc_gid_map_operations),
|
2012-08-30 15:24:05 +07:00
|
|
|
REG("projid_map", S_IRUGO|S_IWUSR, proc_projid_map_operations),
|
2014-12-03 01:27:26 +07:00
|
|
|
REG("setgroups", S_IRUGO|S_IWUSR, proc_setgroups_operations),
|
2011-11-17 15:11:58 +07:00
|
|
|
#endif
|
2017-01-21 12:09:08 +07:00
|
|
|
#if defined(CONFIG_CHECKPOINT_RESTORE) && defined(CONFIG_POSIX_TIMERS)
|
2013-03-11 16:12:45 +07:00
|
|
|
REG("timers", S_IRUGO, proc_timers_operations),
|
|
|
|
#endif
|
2016-03-18 04:20:54 +07:00
|
|
|
REG("timerslack_ns", S_IRUGO|S_IWUGO, proc_pid_set_timerslack_ns_operations),
|
2017-02-14 08:42:41 +07:00
|
|
|
#ifdef CONFIG_LIVEPATCH
|
|
|
|
ONE("patch_state", S_IRUSR, proc_pid_patch_state),
|
|
|
|
#endif
|
2018-08-17 05:17:01 +07:00
|
|
|
#ifdef CONFIG_STACKLEAK_METRICS
|
|
|
|
ONE("stack_depth", S_IRUGO, proc_stack_depth),
|
|
|
|
#endif
|
2006-10-02 16:17:05 +07:00
|
|
|
};
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
static int proc_tgid_base_readdir(struct file *file, struct dir_context *ctx)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2013-05-16 23:07:31 +07:00
|
|
|
return proc_pident_readdir(file, ctx,
|
|
|
|
tgid_base_stuff, ARRAY_SIZE(tgid_base_stuff));
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2007-02-12 15:55:34 +07:00
|
|
|
static const struct file_operations proc_tgid_base_operations = {
|
2005-04-17 05:20:36 +07:00
|
|
|
.read = generic_read_dir,
|
2016-04-21 04:13:54 +07:00
|
|
|
.iterate_shared = proc_tgid_base_readdir,
|
|
|
|
.llseek = generic_file_llseek,
|
2005-04-17 05:20:36 +07:00
|
|
|
};
|
|
|
|
|
2012-06-11 04:13:09 +07:00
|
|
|
static struct dentry *proc_tgid_base_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
|
|
|
|
{
|
2006-10-02 16:18:56 +07:00
|
|
|
return proc_pident_lookup(dir, dentry,
|
|
|
|
tgid_base_stuff, ARRAY_SIZE(tgid_base_stuff));
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2007-02-12 15:55:40 +07:00
|
|
|
static const struct inode_operations proc_tgid_base_inode_operations = {
|
2006-10-02 16:17:05 +07:00
|
|
|
.lookup = proc_tgid_base_lookup,
|
2006-06-26 14:25:55 +07:00
|
|
|
.getattr = pid_getattr,
|
2006-07-16 02:26:45 +07:00
|
|
|
.setattr = proc_setattr,
|
procfs: add hidepid= and gid= mount options
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:11:31 +07:00
|
|
|
.permission = proc_pid_permission,
|
2005-04-17 05:20:36 +07:00
|
|
|
};
|
|
|
|
|
2007-10-19 13:40:03 +07:00
|
|
|
static void proc_flush_task_mnt(struct vfsmount *mnt, pid_t pid, pid_t tgid)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2006-06-26 14:25:48 +07:00
|
|
|
struct dentry *dentry, *leader, *dir;
|
2018-02-07 06:36:51 +07:00
|
|
|
char buf[10 + 1];
|
2006-06-26 14:25:48 +07:00
|
|
|
struct qstr name;
|
|
|
|
|
|
|
|
name.name = buf;
|
2018-02-07 06:36:51 +07:00
|
|
|
name.len = snprintf(buf, sizeof(buf), "%u", pid);
|
2013-02-12 11:20:37 +07:00
|
|
|
/* no ->d_hash() rejects on procfs */
|
2007-10-19 13:40:03 +07:00
|
|
|
dentry = d_hash_and_lookup(mnt->mnt_root, &name);
|
2006-06-26 14:25:48 +07:00
|
|
|
if (dentry) {
|
2014-02-14 01:24:23 +07:00
|
|
|
d_invalidate(dentry);
|
2006-06-26 14:25:48 +07:00
|
|
|
dput(dentry);
|
|
|
|
}
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2014-12-11 06:54:56 +07:00
|
|
|
if (pid == tgid)
|
|
|
|
return;
|
|
|
|
|
2006-06-26 14:25:48 +07:00
|
|
|
name.name = buf;
|
2018-02-07 06:36:51 +07:00
|
|
|
name.len = snprintf(buf, sizeof(buf), "%u", tgid);
|
2007-10-19 13:40:03 +07:00
|
|
|
leader = d_hash_and_lookup(mnt->mnt_root, &name);
|
2006-06-26 14:25:48 +07:00
|
|
|
if (!leader)
|
|
|
|
goto out;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2006-06-26 14:25:48 +07:00
|
|
|
name.name = "task";
|
|
|
|
name.len = strlen(name.name);
|
|
|
|
dir = d_hash_and_lookup(leader, &name);
|
|
|
|
if (!dir)
|
|
|
|
goto out_put_leader;
|
|
|
|
|
|
|
|
name.name = buf;
|
2018-02-07 06:36:51 +07:00
|
|
|
name.len = snprintf(buf, sizeof(buf), "%u", pid);
|
2006-06-26 14:25:48 +07:00
|
|
|
dentry = d_hash_and_lookup(dir, &name);
|
|
|
|
if (dentry) {
|
2014-02-14 01:24:23 +07:00
|
|
|
d_invalidate(dentry);
|
2006-06-26 14:25:48 +07:00
|
|
|
dput(dentry);
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
2006-06-26 14:25:48 +07:00
|
|
|
|
|
|
|
dput(dir);
|
|
|
|
out_put_leader:
|
|
|
|
dput(leader);
|
|
|
|
out:
|
|
|
|
return;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2007-10-22 11:00:10 +07:00
|
|
|
/**
|
|
|
|
* proc_flush_task - Remove dcache entries for @task from the /proc dcache.
|
|
|
|
* @task: task that should be flushed.
|
|
|
|
*
|
|
|
|
* When flushing dentries from proc, one needs to flush them from global
|
2007-10-19 13:40:03 +07:00
|
|
|
* proc (proc_mnt) and from all the namespaces' procs this task was seen
|
2007-10-22 11:00:10 +07:00
|
|
|
* in. This call is supposed to do all of this job.
|
|
|
|
*
|
|
|
|
* Looks in the dcache for
|
|
|
|
* /proc/@pid
|
|
|
|
* /proc/@tgid/task/@pid
|
|
|
|
* if either directory is present flushes it and all of it'ts children
|
|
|
|
* from the dcache.
|
|
|
|
*
|
|
|
|
* It is safe and reasonable to cache /proc entries for a task until
|
|
|
|
* that task exits. After that they just clog up the dcache with
|
|
|
|
* useless entries, possibly causing useful dcache entries to be
|
|
|
|
* flushed instead. This routine is proved to flush those useless
|
|
|
|
* dcache entries at process exit time.
|
|
|
|
*
|
|
|
|
* NOTE: This routine is just an optimization so it does not guarantee
|
|
|
|
* that no dcache entries will exist at process exit time it
|
|
|
|
* just makes it very unlikely that any will persist.
|
2007-10-19 13:40:03 +07:00
|
|
|
*/
|
|
|
|
|
|
|
|
void proc_flush_task(struct task_struct *task)
|
|
|
|
{
|
2007-11-15 08:00:07 +07:00
|
|
|
int i;
|
proc_flush_task: flush /proc/tid/task/pid when a sub-thread exits
The exiting sub-thread flushes /proc/pid only, but this doesn't buy too
much: ps and friends mostly use /proc/tid/task/pid.
Remove "if (thread_group_leader())" checks from proc_flush_task() path,
this means we always remove /proc/tid/task/pid dentry on exit, and this
actually matches the comment above proc_flush_task().
The test-case:
static void* tfunc(void *arg)
{
char name[256];
sprintf(name, "/proc/%d/task/%ld/status", getpid(), gettid());
close(open(name, O_RDONLY));
return NULL;
}
int main(void)
{
pthread_t t;
for (;;) {
if (!pthread_create(&t, NULL, &tfunc, NULL))
pthread_join(t, NULL);
}
}
slabtop shows that pid/proc_inode_cache/etc grow quickly and
"indefinitely" until the task is killed or shrink_slab() is called, not
good. And the main thread needs a lot of time to exit.
The same can happen if something like "ps -efL" runs continuously, while
some application spawns short-living threads.
Reported-by: "James M. Leddy" <jleddy@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dominic Duval <dduval@redhat.com>
Cc: Frank Hirtz <fhirtz@redhat.com>
Cc: "Fuller, Johnray" <Johnray.Fuller@gs.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Paul Batkowski <pbatkowski@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:45:34 +07:00
|
|
|
struct pid *pid, *tgid;
|
2007-10-19 13:40:11 +07:00
|
|
|
struct upid *upid;
|
|
|
|
|
|
|
|
pid = task_pid(task);
|
proc_flush_task: flush /proc/tid/task/pid when a sub-thread exits
The exiting sub-thread flushes /proc/pid only, but this doesn't buy too
much: ps and friends mostly use /proc/tid/task/pid.
Remove "if (thread_group_leader())" checks from proc_flush_task() path,
this means we always remove /proc/tid/task/pid dentry on exit, and this
actually matches the comment above proc_flush_task().
The test-case:
static void* tfunc(void *arg)
{
char name[256];
sprintf(name, "/proc/%d/task/%ld/status", getpid(), gettid());
close(open(name, O_RDONLY));
return NULL;
}
int main(void)
{
pthread_t t;
for (;;) {
if (!pthread_create(&t, NULL, &tfunc, NULL))
pthread_join(t, NULL);
}
}
slabtop shows that pid/proc_inode_cache/etc grow quickly and
"indefinitely" until the task is killed or shrink_slab() is called, not
good. And the main thread needs a lot of time to exit.
The same can happen if something like "ps -efL" runs continuously, while
some application spawns short-living threads.
Reported-by: "James M. Leddy" <jleddy@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dominic Duval <dduval@redhat.com>
Cc: Frank Hirtz <fhirtz@redhat.com>
Cc: "Fuller, Johnray" <Johnray.Fuller@gs.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Paul Batkowski <pbatkowski@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:45:34 +07:00
|
|
|
tgid = task_tgid(task);
|
2007-10-19 13:40:11 +07:00
|
|
|
|
2007-11-15 08:00:07 +07:00
|
|
|
for (i = 0; i <= pid->level; i++) {
|
2007-10-19 13:40:11 +07:00
|
|
|
upid = &pid->numbers[i];
|
|
|
|
proc_flush_task_mnt(upid->ns->proc_mnt, upid->nr,
|
proc_flush_task: flush /proc/tid/task/pid when a sub-thread exits
The exiting sub-thread flushes /proc/pid only, but this doesn't buy too
much: ps and friends mostly use /proc/tid/task/pid.
Remove "if (thread_group_leader())" checks from proc_flush_task() path,
this means we always remove /proc/tid/task/pid dentry on exit, and this
actually matches the comment above proc_flush_task().
The test-case:
static void* tfunc(void *arg)
{
char name[256];
sprintf(name, "/proc/%d/task/%ld/status", getpid(), gettid());
close(open(name, O_RDONLY));
return NULL;
}
int main(void)
{
pthread_t t;
for (;;) {
if (!pthread_create(&t, NULL, &tfunc, NULL))
pthread_join(t, NULL);
}
}
slabtop shows that pid/proc_inode_cache/etc grow quickly and
"indefinitely" until the task is killed or shrink_slab() is called, not
good. And the main thread needs a lot of time to exit.
The same can happen if something like "ps -efL" runs continuously, while
some application spawns short-living threads.
Reported-by: "James M. Leddy" <jleddy@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dominic Duval <dduval@redhat.com>
Cc: Frank Hirtz <fhirtz@redhat.com>
Cc: "Fuller, Johnray" <Johnray.Fuller@gs.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Paul Batkowski <pbatkowski@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:45:34 +07:00
|
|
|
tgid->numbers[i].nr);
|
2007-10-19 13:40:11 +07:00
|
|
|
}
|
2007-10-19 13:40:03 +07:00
|
|
|
}
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
static struct dentry *proc_pid_instantiate(struct dentry * dentry,
|
2013-06-15 14:15:20 +07:00
|
|
|
struct task_struct *task, const void *ptr)
|
2006-10-02 16:18:49 +07:00
|
|
|
{
|
|
|
|
struct inode *inode;
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
inode = proc_pid_make_inode(dentry->d_sb, task, S_IFDIR | S_IRUGO | S_IXUGO);
|
2006-10-02 16:18:49 +07:00
|
|
|
if (!inode)
|
2018-05-03 20:21:05 +07:00
|
|
|
return ERR_PTR(-ENOENT);
|
2006-10-02 16:18:49 +07:00
|
|
|
|
|
|
|
inode->i_op = &proc_tgid_base_inode_operations;
|
|
|
|
inode->i_fop = &proc_tgid_base_operations;
|
|
|
|
inode->i_flags|=S_IMMUTABLE;
|
2008-06-06 12:46:53 +07:00
|
|
|
|
2016-12-13 07:45:32 +07:00
|
|
|
set_nlink(inode, nlink_tgid);
|
2018-05-03 08:26:16 +07:00
|
|
|
pid_update_inode(task, inode);
|
2006-10-02 16:18:49 +07:00
|
|
|
|
2011-01-07 13:49:55 +07:00
|
|
|
d_set_d_op(dentry, &pid_dentry_operations);
|
2018-05-03 20:21:05 +07:00
|
|
|
return d_splice_alias(inode, dentry);
|
2006-10-02 16:18:49 +07:00
|
|
|
}
|
|
|
|
|
2012-06-11 04:13:09 +07:00
|
|
|
struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, unsigned int flags)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
|
|
|
struct task_struct *task;
|
|
|
|
unsigned tgid;
|
2007-10-19 13:40:14 +07:00
|
|
|
struct pid_namespace *ns;
|
2018-05-03 20:21:05 +07:00
|
|
|
struct dentry *result = ERR_PTR(-ENOENT);
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2014-08-09 04:21:25 +07:00
|
|
|
tgid = name_to_int(&dentry->d_name);
|
2005-04-17 05:20:36 +07:00
|
|
|
if (tgid == ~0U)
|
|
|
|
goto out;
|
|
|
|
|
2007-10-19 13:40:14 +07:00
|
|
|
ns = dentry->d_sb->s_fs_info;
|
2006-06-26 14:25:51 +07:00
|
|
|
rcu_read_lock();
|
2007-10-19 13:40:14 +07:00
|
|
|
task = find_task_by_pid_ns(tgid, ns);
|
2005-04-17 05:20:36 +07:00
|
|
|
if (task)
|
|
|
|
get_task_struct(task);
|
2006-06-26 14:25:51 +07:00
|
|
|
rcu_read_unlock();
|
2005-04-17 05:20:36 +07:00
|
|
|
if (!task)
|
|
|
|
goto out;
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
result = proc_pid_instantiate(dentry, task, NULL);
|
2005-04-17 05:20:36 +07:00
|
|
|
put_task_struct(task);
|
|
|
|
out:
|
2018-05-03 20:21:05 +07:00
|
|
|
return result;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
[PATCH] proc: readdir race fix (take 3)
The problem: An opendir, readdir, closedir sequence can fail to report
process ids that are continually in use throughout the sequence of system
calls. For this race to trigger the process that proc_pid_readdir stops at
must exit before readdir is called again.
This can cause ps to fail to report processes, and it is in violation of
posix guarantees and normal application expectations with respect to
readdir.
Currently there is no way to work around this problem in user space short
of providing a gargantuan buffer to user space so the directory read all
happens in on system call.
This patch implements the normal directory semantics for proc, that
guarantee that a directory entry that is neither created nor destroyed
while reading the directory entry will be returned. For directory that are
either created or destroyed during the readdir you may or may not see them.
Furthermore you may seek to a directory offset you have previously seen.
These are the guarantee that ext[23] provides and that posix requires, and
more importantly that user space expects. Plus it is a simple semantic to
implement reliable service. It is just a matter of calling readdir a
second time if you are wondering if something new has show up.
These better semantics are implemented by scanning through the pids in
numerical order and by making the file offset a pid plus a fixed offset.
The pid scan happens on the pid bitmap, which when you look at it is
remarkably efficient for a brute force algorithm. Given that a typical
cache line is 64 bytes and thus covers space for 64*8 == 200 pids. There
are only 40 cache lines for the entire 32K pid space. A typical system
will have 100 pids or more so this is actually fewer cache lines we have to
look at to scan a linked list, and the worst case of having to scan the
entire pid bitmap is pretty reasonable.
If we need something more efficient we can go to a more efficient data
structure for indexing the pids, but for now what we have should be
sufficient.
In addition this takes no additional locks and is actually less code than
what we are doing now.
Also another very subtle bug in this area has been fixed. It is possible
to catch a task in the middle of de_thread where a thread is assuming the
thread of it's thread group leader. This patch carefully handles that case
so if we hit it we don't fail to return the pid, that is undergoing the
de_thread dance.
Thanks to KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> for
providing the first fix, pointing this out and working on it.
[oleg@tv-sign.ru: fix it]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 16:17:04 +07:00
|
|
|
* Find the first task with tgid >= tgid
|
2006-06-26 14:25:50 +07:00
|
|
|
*
|
2005-04-17 05:20:36 +07:00
|
|
|
*/
|
2007-11-29 07:21:26 +07:00
|
|
|
struct tgid_iter {
|
|
|
|
unsigned int tgid;
|
[PATCH] proc: readdir race fix (take 3)
The problem: An opendir, readdir, closedir sequence can fail to report
process ids that are continually in use throughout the sequence of system
calls. For this race to trigger the process that proc_pid_readdir stops at
must exit before readdir is called again.
This can cause ps to fail to report processes, and it is in violation of
posix guarantees and normal application expectations with respect to
readdir.
Currently there is no way to work around this problem in user space short
of providing a gargantuan buffer to user space so the directory read all
happens in on system call.
This patch implements the normal directory semantics for proc, that
guarantee that a directory entry that is neither created nor destroyed
while reading the directory entry will be returned. For directory that are
either created or destroyed during the readdir you may or may not see them.
Furthermore you may seek to a directory offset you have previously seen.
These are the guarantee that ext[23] provides and that posix requires, and
more importantly that user space expects. Plus it is a simple semantic to
implement reliable service. It is just a matter of calling readdir a
second time if you are wondering if something new has show up.
These better semantics are implemented by scanning through the pids in
numerical order and by making the file offset a pid plus a fixed offset.
The pid scan happens on the pid bitmap, which when you look at it is
remarkably efficient for a brute force algorithm. Given that a typical
cache line is 64 bytes and thus covers space for 64*8 == 200 pids. There
are only 40 cache lines for the entire 32K pid space. A typical system
will have 100 pids or more so this is actually fewer cache lines we have to
look at to scan a linked list, and the worst case of having to scan the
entire pid bitmap is pretty reasonable.
If we need something more efficient we can go to a more efficient data
structure for indexing the pids, but for now what we have should be
sufficient.
In addition this takes no additional locks and is actually less code than
what we are doing now.
Also another very subtle bug in this area has been fixed. It is possible
to catch a task in the middle of de_thread where a thread is assuming the
thread of it's thread group leader. This patch carefully handles that case
so if we hit it we don't fail to return the pid, that is undergoing the
de_thread dance.
Thanks to KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> for
providing the first fix, pointing this out and working on it.
[oleg@tv-sign.ru: fix it]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 16:17:04 +07:00
|
|
|
struct task_struct *task;
|
2007-11-29 07:21:26 +07:00
|
|
|
};
|
|
|
|
static struct tgid_iter next_tgid(struct pid_namespace *ns, struct tgid_iter iter)
|
|
|
|
{
|
[PATCH] proc: readdir race fix (take 3)
The problem: An opendir, readdir, closedir sequence can fail to report
process ids that are continually in use throughout the sequence of system
calls. For this race to trigger the process that proc_pid_readdir stops at
must exit before readdir is called again.
This can cause ps to fail to report processes, and it is in violation of
posix guarantees and normal application expectations with respect to
readdir.
Currently there is no way to work around this problem in user space short
of providing a gargantuan buffer to user space so the directory read all
happens in on system call.
This patch implements the normal directory semantics for proc, that
guarantee that a directory entry that is neither created nor destroyed
while reading the directory entry will be returned. For directory that are
either created or destroyed during the readdir you may or may not see them.
Furthermore you may seek to a directory offset you have previously seen.
These are the guarantee that ext[23] provides and that posix requires, and
more importantly that user space expects. Plus it is a simple semantic to
implement reliable service. It is just a matter of calling readdir a
second time if you are wondering if something new has show up.
These better semantics are implemented by scanning through the pids in
numerical order and by making the file offset a pid plus a fixed offset.
The pid scan happens on the pid bitmap, which when you look at it is
remarkably efficient for a brute force algorithm. Given that a typical
cache line is 64 bytes and thus covers space for 64*8 == 200 pids. There
are only 40 cache lines for the entire 32K pid space. A typical system
will have 100 pids or more so this is actually fewer cache lines we have to
look at to scan a linked list, and the worst case of having to scan the
entire pid bitmap is pretty reasonable.
If we need something more efficient we can go to a more efficient data
structure for indexing the pids, but for now what we have should be
sufficient.
In addition this takes no additional locks and is actually less code than
what we are doing now.
Also another very subtle bug in this area has been fixed. It is possible
to catch a task in the middle of de_thread where a thread is assuming the
thread of it's thread group leader. This patch carefully handles that case
so if we hit it we don't fail to return the pid, that is undergoing the
de_thread dance.
Thanks to KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> for
providing the first fix, pointing this out and working on it.
[oleg@tv-sign.ru: fix it]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 16:17:04 +07:00
|
|
|
struct pid *pid;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2007-11-29 07:21:26 +07:00
|
|
|
if (iter.task)
|
|
|
|
put_task_struct(iter.task);
|
2006-06-26 14:25:51 +07:00
|
|
|
rcu_read_lock();
|
[PATCH] proc: readdir race fix (take 3)
The problem: An opendir, readdir, closedir sequence can fail to report
process ids that are continually in use throughout the sequence of system
calls. For this race to trigger the process that proc_pid_readdir stops at
must exit before readdir is called again.
This can cause ps to fail to report processes, and it is in violation of
posix guarantees and normal application expectations with respect to
readdir.
Currently there is no way to work around this problem in user space short
of providing a gargantuan buffer to user space so the directory read all
happens in on system call.
This patch implements the normal directory semantics for proc, that
guarantee that a directory entry that is neither created nor destroyed
while reading the directory entry will be returned. For directory that are
either created or destroyed during the readdir you may or may not see them.
Furthermore you may seek to a directory offset you have previously seen.
These are the guarantee that ext[23] provides and that posix requires, and
more importantly that user space expects. Plus it is a simple semantic to
implement reliable service. It is just a matter of calling readdir a
second time if you are wondering if something new has show up.
These better semantics are implemented by scanning through the pids in
numerical order and by making the file offset a pid plus a fixed offset.
The pid scan happens on the pid bitmap, which when you look at it is
remarkably efficient for a brute force algorithm. Given that a typical
cache line is 64 bytes and thus covers space for 64*8 == 200 pids. There
are only 40 cache lines for the entire 32K pid space. A typical system
will have 100 pids or more so this is actually fewer cache lines we have to
look at to scan a linked list, and the worst case of having to scan the
entire pid bitmap is pretty reasonable.
If we need something more efficient we can go to a more efficient data
structure for indexing the pids, but for now what we have should be
sufficient.
In addition this takes no additional locks and is actually less code than
what we are doing now.
Also another very subtle bug in this area has been fixed. It is possible
to catch a task in the middle of de_thread where a thread is assuming the
thread of it's thread group leader. This patch carefully handles that case
so if we hit it we don't fail to return the pid, that is undergoing the
de_thread dance.
Thanks to KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> for
providing the first fix, pointing this out and working on it.
[oleg@tv-sign.ru: fix it]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 16:17:04 +07:00
|
|
|
retry:
|
2007-11-29 07:21:26 +07:00
|
|
|
iter.task = NULL;
|
|
|
|
pid = find_ge_pid(iter.tgid, ns);
|
[PATCH] proc: readdir race fix (take 3)
The problem: An opendir, readdir, closedir sequence can fail to report
process ids that are continually in use throughout the sequence of system
calls. For this race to trigger the process that proc_pid_readdir stops at
must exit before readdir is called again.
This can cause ps to fail to report processes, and it is in violation of
posix guarantees and normal application expectations with respect to
readdir.
Currently there is no way to work around this problem in user space short
of providing a gargantuan buffer to user space so the directory read all
happens in on system call.
This patch implements the normal directory semantics for proc, that
guarantee that a directory entry that is neither created nor destroyed
while reading the directory entry will be returned. For directory that are
either created or destroyed during the readdir you may or may not see them.
Furthermore you may seek to a directory offset you have previously seen.
These are the guarantee that ext[23] provides and that posix requires, and
more importantly that user space expects. Plus it is a simple semantic to
implement reliable service. It is just a matter of calling readdir a
second time if you are wondering if something new has show up.
These better semantics are implemented by scanning through the pids in
numerical order and by making the file offset a pid plus a fixed offset.
The pid scan happens on the pid bitmap, which when you look at it is
remarkably efficient for a brute force algorithm. Given that a typical
cache line is 64 bytes and thus covers space for 64*8 == 200 pids. There
are only 40 cache lines for the entire 32K pid space. A typical system
will have 100 pids or more so this is actually fewer cache lines we have to
look at to scan a linked list, and the worst case of having to scan the
entire pid bitmap is pretty reasonable.
If we need something more efficient we can go to a more efficient data
structure for indexing the pids, but for now what we have should be
sufficient.
In addition this takes no additional locks and is actually less code than
what we are doing now.
Also another very subtle bug in this area has been fixed. It is possible
to catch a task in the middle of de_thread where a thread is assuming the
thread of it's thread group leader. This patch carefully handles that case
so if we hit it we don't fail to return the pid, that is undergoing the
de_thread dance.
Thanks to KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> for
providing the first fix, pointing this out and working on it.
[oleg@tv-sign.ru: fix it]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 16:17:04 +07:00
|
|
|
if (pid) {
|
2007-11-29 07:21:26 +07:00
|
|
|
iter.tgid = pid_nr_ns(pid, ns);
|
|
|
|
iter.task = pid_task(pid, PIDTYPE_PID);
|
[PATCH] proc: readdir race fix (take 3)
The problem: An opendir, readdir, closedir sequence can fail to report
process ids that are continually in use throughout the sequence of system
calls. For this race to trigger the process that proc_pid_readdir stops at
must exit before readdir is called again.
This can cause ps to fail to report processes, and it is in violation of
posix guarantees and normal application expectations with respect to
readdir.
Currently there is no way to work around this problem in user space short
of providing a gargantuan buffer to user space so the directory read all
happens in on system call.
This patch implements the normal directory semantics for proc, that
guarantee that a directory entry that is neither created nor destroyed
while reading the directory entry will be returned. For directory that are
either created or destroyed during the readdir you may or may not see them.
Furthermore you may seek to a directory offset you have previously seen.
These are the guarantee that ext[23] provides and that posix requires, and
more importantly that user space expects. Plus it is a simple semantic to
implement reliable service. It is just a matter of calling readdir a
second time if you are wondering if something new has show up.
These better semantics are implemented by scanning through the pids in
numerical order and by making the file offset a pid plus a fixed offset.
The pid scan happens on the pid bitmap, which when you look at it is
remarkably efficient for a brute force algorithm. Given that a typical
cache line is 64 bytes and thus covers space for 64*8 == 200 pids. There
are only 40 cache lines for the entire 32K pid space. A typical system
will have 100 pids or more so this is actually fewer cache lines we have to
look at to scan a linked list, and the worst case of having to scan the
entire pid bitmap is pretty reasonable.
If we need something more efficient we can go to a more efficient data
structure for indexing the pids, but for now what we have should be
sufficient.
In addition this takes no additional locks and is actually less code than
what we are doing now.
Also another very subtle bug in this area has been fixed. It is possible
to catch a task in the middle of de_thread where a thread is assuming the
thread of it's thread group leader. This patch carefully handles that case
so if we hit it we don't fail to return the pid, that is undergoing the
de_thread dance.
Thanks to KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> for
providing the first fix, pointing this out and working on it.
[oleg@tv-sign.ru: fix it]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 16:17:04 +07:00
|
|
|
/* What we to know is if the pid we have find is the
|
|
|
|
* pid of a thread_group_leader. Testing for task
|
|
|
|
* being a thread_group_leader is the obvious thing
|
|
|
|
* todo but there is a window when it fails, due to
|
|
|
|
* the pid transfer logic in de_thread.
|
|
|
|
*
|
|
|
|
* So we perform the straight forward test of seeing
|
|
|
|
* if the pid we have found is the pid of a thread
|
|
|
|
* group leader, and don't worry if the task we have
|
|
|
|
* found doesn't happen to be a thread group leader.
|
|
|
|
* As we don't care in the case of readdir.
|
|
|
|
*/
|
2007-11-29 07:21:26 +07:00
|
|
|
if (!iter.task || !has_group_leader_pid(iter.task)) {
|
|
|
|
iter.tgid += 1;
|
[PATCH] proc: readdir race fix (take 3)
The problem: An opendir, readdir, closedir sequence can fail to report
process ids that are continually in use throughout the sequence of system
calls. For this race to trigger the process that proc_pid_readdir stops at
must exit before readdir is called again.
This can cause ps to fail to report processes, and it is in violation of
posix guarantees and normal application expectations with respect to
readdir.
Currently there is no way to work around this problem in user space short
of providing a gargantuan buffer to user space so the directory read all
happens in on system call.
This patch implements the normal directory semantics for proc, that
guarantee that a directory entry that is neither created nor destroyed
while reading the directory entry will be returned. For directory that are
either created or destroyed during the readdir you may or may not see them.
Furthermore you may seek to a directory offset you have previously seen.
These are the guarantee that ext[23] provides and that posix requires, and
more importantly that user space expects. Plus it is a simple semantic to
implement reliable service. It is just a matter of calling readdir a
second time if you are wondering if something new has show up.
These better semantics are implemented by scanning through the pids in
numerical order and by making the file offset a pid plus a fixed offset.
The pid scan happens on the pid bitmap, which when you look at it is
remarkably efficient for a brute force algorithm. Given that a typical
cache line is 64 bytes and thus covers space for 64*8 == 200 pids. There
are only 40 cache lines for the entire 32K pid space. A typical system
will have 100 pids or more so this is actually fewer cache lines we have to
look at to scan a linked list, and the worst case of having to scan the
entire pid bitmap is pretty reasonable.
If we need something more efficient we can go to a more efficient data
structure for indexing the pids, but for now what we have should be
sufficient.
In addition this takes no additional locks and is actually less code than
what we are doing now.
Also another very subtle bug in this area has been fixed. It is possible
to catch a task in the middle of de_thread where a thread is assuming the
thread of it's thread group leader. This patch carefully handles that case
so if we hit it we don't fail to return the pid, that is undergoing the
de_thread dance.
Thanks to KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> for
providing the first fix, pointing this out and working on it.
[oleg@tv-sign.ru: fix it]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 16:17:04 +07:00
|
|
|
goto retry;
|
2007-11-29 07:21:26 +07:00
|
|
|
}
|
|
|
|
get_task_struct(iter.task);
|
2006-06-26 14:25:50 +07:00
|
|
|
}
|
2006-06-26 14:25:51 +07:00
|
|
|
rcu_read_unlock();
|
2007-11-29 07:21:26 +07:00
|
|
|
return iter;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
2014-07-31 17:10:50 +07:00
|
|
|
#define TGID_OFFSET (FIRST_PROCESS_ENTRY + 2)
|
[PATCH] proc: readdir race fix (take 3)
The problem: An opendir, readdir, closedir sequence can fail to report
process ids that are continually in use throughout the sequence of system
calls. For this race to trigger the process that proc_pid_readdir stops at
must exit before readdir is called again.
This can cause ps to fail to report processes, and it is in violation of
posix guarantees and normal application expectations with respect to
readdir.
Currently there is no way to work around this problem in user space short
of providing a gargantuan buffer to user space so the directory read all
happens in on system call.
This patch implements the normal directory semantics for proc, that
guarantee that a directory entry that is neither created nor destroyed
while reading the directory entry will be returned. For directory that are
either created or destroyed during the readdir you may or may not see them.
Furthermore you may seek to a directory offset you have previously seen.
These are the guarantee that ext[23] provides and that posix requires, and
more importantly that user space expects. Plus it is a simple semantic to
implement reliable service. It is just a matter of calling readdir a
second time if you are wondering if something new has show up.
These better semantics are implemented by scanning through the pids in
numerical order and by making the file offset a pid plus a fixed offset.
The pid scan happens on the pid bitmap, which when you look at it is
remarkably efficient for a brute force algorithm. Given that a typical
cache line is 64 bytes and thus covers space for 64*8 == 200 pids. There
are only 40 cache lines for the entire 32K pid space. A typical system
will have 100 pids or more so this is actually fewer cache lines we have to
look at to scan a linked list, and the worst case of having to scan the
entire pid bitmap is pretty reasonable.
If we need something more efficient we can go to a more efficient data
structure for indexing the pids, but for now what we have should be
sufficient.
In addition this takes no additional locks and is actually less code than
what we are doing now.
Also another very subtle bug in this area has been fixed. It is possible
to catch a task in the middle of de_thread where a thread is assuming the
thread of it's thread group leader. This patch carefully handles that case
so if we hit it we don't fail to return the pid, that is undergoing the
de_thread dance.
Thanks to KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> for
providing the first fix, pointing this out and working on it.
[oleg@tv-sign.ru: fix it]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 16:17:04 +07:00
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
/* for the /proc/ directory itself, after non-process stuff has been done */
|
2013-05-16 23:07:31 +07:00
|
|
|
int proc_pid_readdir(struct file *file, struct dir_context *ctx)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2007-11-29 07:21:26 +07:00
|
|
|
struct tgid_iter iter;
|
2018-05-16 12:19:01 +07:00
|
|
|
struct pid_namespace *ns = proc_pid_ns(file_inode(file));
|
2013-05-16 23:07:31 +07:00
|
|
|
loff_t pos = ctx->pos;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2013-03-30 06:27:05 +07:00
|
|
|
if (pos >= PID_MAX_LIMIT + TGID_OFFSET)
|
2013-05-16 23:07:31 +07:00
|
|
|
return 0;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2014-07-31 17:10:50 +07:00
|
|
|
if (pos == TGID_OFFSET - 2) {
|
2015-03-18 05:25:59 +07:00
|
|
|
struct inode *inode = d_inode(ns->proc_self);
|
2013-06-15 13:45:10 +07:00
|
|
|
if (!dir_emit(ctx, "self", 4, inode->i_ino, DT_LNK))
|
2013-05-16 23:07:31 +07:00
|
|
|
return 0;
|
2014-07-31 17:10:50 +07:00
|
|
|
ctx->pos = pos = pos + 1;
|
|
|
|
}
|
|
|
|
if (pos == TGID_OFFSET - 1) {
|
2015-03-18 05:25:59 +07:00
|
|
|
struct inode *inode = d_inode(ns->proc_thread_self);
|
2014-07-31 17:10:50 +07:00
|
|
|
if (!dir_emit(ctx, "thread-self", 11, inode->i_ino, DT_LNK))
|
|
|
|
return 0;
|
|
|
|
ctx->pos = pos = pos + 1;
|
2013-03-30 06:27:05 +07:00
|
|
|
}
|
2014-07-31 17:10:50 +07:00
|
|
|
iter.tgid = pos - TGID_OFFSET;
|
2007-11-29 07:21:26 +07:00
|
|
|
iter.task = NULL;
|
|
|
|
for (iter = next_tgid(ns, iter);
|
|
|
|
iter.task;
|
|
|
|
iter.tgid += 1, iter = next_tgid(ns, iter)) {
|
2018-02-07 06:36:51 +07:00
|
|
|
char name[10 + 1];
|
2018-06-08 07:10:10 +07:00
|
|
|
unsigned int len;
|
2017-01-25 06:18:07 +07:00
|
|
|
|
|
|
|
cond_resched();
|
2017-02-25 06:00:23 +07:00
|
|
|
if (!has_pid_permissions(ns, iter.task, HIDEPID_INVISIBLE))
|
2013-05-16 23:07:31 +07:00
|
|
|
continue;
|
procfs: add hidepid= and gid= mount options
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:11:31 +07:00
|
|
|
|
2018-02-07 06:36:51 +07:00
|
|
|
len = snprintf(name, sizeof(name), "%u", iter.tgid);
|
2013-05-16 23:07:31 +07:00
|
|
|
ctx->pos = iter.tgid + TGID_OFFSET;
|
|
|
|
if (!proc_fill_cache(file, ctx, name, len,
|
|
|
|
proc_pid_instantiate, iter.task, NULL)) {
|
2007-11-29 07:21:26 +07:00
|
|
|
put_task_struct(iter.task);
|
2013-05-16 23:07:31 +07:00
|
|
|
return 0;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
2006-06-26 14:25:50 +07:00
|
|
|
}
|
2013-05-16 23:07:31 +07:00
|
|
|
ctx->pos = PID_MAX_LIMIT + TGID_OFFSET;
|
2006-06-26 14:25:50 +07:00
|
|
|
return 0;
|
|
|
|
}
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2016-05-21 07:00:08 +07:00
|
|
|
/*
|
|
|
|
* proc_tid_comm_permission is a special permission function exclusively
|
|
|
|
* used for the node /proc/<pid>/task/<tid>/comm.
|
|
|
|
* It bypasses generic permission checks in the case where a task of the same
|
|
|
|
* task group attempts to access the node.
|
|
|
|
* The rationale behind this is that glibc and bionic access this node for
|
|
|
|
* cross thread naming (pthread_set/getname_np(!self)). However, if
|
|
|
|
* PR_SET_DUMPABLE gets set to 0 this node among others becomes uid=0 gid=0,
|
|
|
|
* which locks out the cross thread naming implementation.
|
|
|
|
* This function makes sure that the node is always accessible for members of
|
|
|
|
* same thread group.
|
|
|
|
*/
|
|
|
|
static int proc_tid_comm_permission(struct inode *inode, int mask)
|
|
|
|
{
|
|
|
|
bool is_same_tgroup;
|
|
|
|
struct task_struct *task;
|
|
|
|
|
|
|
|
task = get_proc_task(inode);
|
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
|
|
|
is_same_tgroup = same_thread_group(current, task);
|
|
|
|
put_task_struct(task);
|
|
|
|
|
|
|
|
if (likely(is_same_tgroup && !(mask & MAY_EXEC))) {
|
|
|
|
/* This file (/proc/<pid>/task/<tid>/comm) can always be
|
|
|
|
* read or written by the members of the corresponding
|
|
|
|
* thread group.
|
|
|
|
*/
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return generic_permission(inode, mask);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct inode_operations proc_tid_comm_inode_operations = {
|
|
|
|
.permission = proc_tid_comm_permission,
|
|
|
|
};
|
|
|
|
|
2006-10-02 16:17:05 +07:00
|
|
|
/*
|
|
|
|
* Tasks
|
|
|
|
*/
|
2007-05-08 14:26:15 +07:00
|
|
|
static const struct pid_entry tid_base_stuff[] = {
|
2008-11-10 05:32:52 +07:00
|
|
|
DIR("fd", S_IRUSR|S_IXUSR, proc_fd_inode_operations, proc_fd_operations),
|
2010-04-28 03:13:06 +07:00
|
|
|
DIR("fdinfo", S_IRUSR|S_IXUSR, proc_fdinfo_inode_operations, proc_fdinfo_operations),
|
2010-03-08 07:41:34 +07:00
|
|
|
DIR("ns", S_IRUSR|S_IXUGO, proc_ns_dir_inode_operations, proc_ns_dir_operations),
|
2014-08-01 06:27:08 +07:00
|
|
|
#ifdef CONFIG_NET
|
|
|
|
DIR("net", S_IRUGO|S_IXUGO, proc_net_inode_operations, proc_net_operations),
|
|
|
|
#endif
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("environ", S_IRUSR, proc_environ_operations),
|
2016-10-06 05:43:43 +07:00
|
|
|
REG("auxv", S_IRUSR, proc_auxv_operations),
|
2008-11-10 05:32:52 +07:00
|
|
|
ONE("status", S_IRUGO, proc_pid_status),
|
2014-04-08 05:38:36 +07:00
|
|
|
ONE("personality", S_IRUSR, proc_pid_personality),
|
2014-08-09 04:21:37 +07:00
|
|
|
ONE("limits", S_IRUGO, proc_pid_limits),
|
2007-07-09 23:52:00 +07:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations),
|
2008-07-26 09:46:00 +07:00
|
|
|
#endif
|
2016-05-21 07:00:08 +07:00
|
|
|
NOD("comm", S_IFREG|S_IRUGO|S_IWUSR,
|
|
|
|
&proc_tid_comm_inode_operations,
|
|
|
|
&proc_pid_set_comm_operations, {}),
|
2008-07-26 09:46:00 +07:00
|
|
|
#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
|
2014-08-09 04:21:39 +07:00
|
|
|
ONE("syscall", S_IRUSR, proc_pid_syscall),
|
2007-07-09 23:52:00 +07:00
|
|
|
#endif
|
2015-06-26 05:00:54 +07:00
|
|
|
REG("cmdline", S_IRUGO, proc_pid_cmdline_ops),
|
2008-11-10 05:32:52 +07:00
|
|
|
ONE("stat", S_IRUGO, proc_tid_stat),
|
|
|
|
ONE("statm", S_IRUGO, proc_pid_statm),
|
2018-08-22 11:52:48 +07:00
|
|
|
REG("maps", S_IRUGO, proc_pid_maps_operations),
|
2015-06-26 05:00:57 +07:00
|
|
|
#ifdef CONFIG_PROC_CHILDREN
|
2012-06-01 06:26:43 +07:00
|
|
|
REG("children", S_IRUGO, proc_tid_children_operations),
|
|
|
|
#endif
|
2006-10-02 16:17:05 +07:00
|
|
|
#ifdef CONFIG_NUMA
|
2018-08-22 11:52:48 +07:00
|
|
|
REG("numa_maps", S_IRUGO, proc_pid_numa_maps_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("mem", S_IRUSR|S_IWUSR, proc_mem_operations),
|
|
|
|
LNK("cwd", proc_cwd_link),
|
|
|
|
LNK("root", proc_root_link),
|
|
|
|
LNK("exe", proc_exe_link),
|
|
|
|
REG("mounts", S_IRUGO, proc_mounts_operations),
|
|
|
|
REG("mountinfo", S_IRUGO, proc_mountinfo_operations),
|
2008-02-05 13:29:07 +07:00
|
|
|
#ifdef CONFIG_PROC_PAGE_MONITOR
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("clear_refs", S_IWUSR, proc_clear_refs_operations),
|
2018-08-22 11:52:48 +07:00
|
|
|
REG("smaps", S_IRUGO, proc_pid_smaps_operations),
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 06:25:08 +07:00
|
|
|
REG("smaps_rollup", S_IRUGO, proc_pid_smaps_rollup_operations),
|
2014-04-08 05:38:38 +07:00
|
|
|
REG("pagemap", S_IRUSR, proc_pagemap_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_SECURITY
|
2008-11-10 05:32:52 +07:00
|
|
|
DIR("attr", S_IRUGO|S_IXUGO, proc_attr_dir_inode_operations, proc_attr_dir_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_KALLSYMS
|
2014-08-09 04:21:44 +07:00
|
|
|
ONE("wchan", S_IRUGO, proc_pid_wchan),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2008-11-10 15:26:08 +07:00
|
|
|
#ifdef CONFIG_STACKTRACE
|
2014-04-08 05:38:36 +07:00
|
|
|
ONE("stack", S_IRUSR, proc_pid_stack),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2015-06-30 16:06:03 +07:00
|
|
|
#ifdef CONFIG_SCHED_INFO
|
2014-08-09 04:21:46 +07:00
|
|
|
ONE("schedstat", S_IRUGO, proc_pid_schedstat),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2008-01-26 03:08:34 +07:00
|
|
|
#ifdef CONFIG_LATENCYTOP
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("latency", S_IRUGO, proc_lstats_operations),
|
2008-01-26 03:08:34 +07:00
|
|
|
#endif
|
2007-10-19 13:39:39 +07:00
|
|
|
#ifdef CONFIG_PROC_PID_CPUSET
|
2014-09-18 15:03:36 +07:00
|
|
|
ONE("cpuset", S_IRUGO, proc_cpuset_show),
|
2007-10-19 13:39:35 +07:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_CGROUPS
|
2014-09-18 15:03:15 +07:00
|
|
|
ONE("cgroup", S_IRUGO, proc_cgroup_show),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2014-08-09 04:21:48 +07:00
|
|
|
ONE("oom_score", S_IRUGO, proc_oom_score),
|
2012-11-13 08:53:04 +07:00
|
|
|
REG("oom_adj", S_IRUGO|S_IWUSR, proc_oom_adj_operations),
|
oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions. The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.
Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead. This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits. This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.
The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory. "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit. The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.
The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.
Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs. In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.
Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it. It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability. Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000. It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered. The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.
/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa. Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning. Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity. This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 07:19:46 +07:00
|
|
|
REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
#ifdef CONFIG_AUDITSYSCALL
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("loginuid", S_IWUSR|S_IRUGO, proc_loginuid_operations),
|
2011-02-16 09:24:05 +07:00
|
|
|
REG("sessionid", S_IRUGO, proc_sessionid_operations),
|
2006-10-02 16:17:05 +07:00
|
|
|
#endif
|
2006-12-08 17:39:47 +07:00
|
|
|
#ifdef CONFIG_FAULT_INJECTION
|
2008-11-10 05:32:52 +07:00
|
|
|
REG("make-it-fail", S_IRUGO|S_IWUSR, proc_fault_inject_operations),
|
2017-07-15 04:49:57 +07:00
|
|
|
REG("fail-nth", 0644, proc_fail_nth_operations),
|
2006-12-08 17:39:47 +07:00
|
|
|
#endif
|
2008-07-25 15:48:49 +07:00
|
|
|
#ifdef CONFIG_TASK_IO_ACCOUNTING
|
2014-08-09 04:21:50 +07:00
|
|
|
ONE("io", S_IRUSR, proc_tid_io_accounting),
|
2008-07-25 15:48:49 +07:00
|
|
|
#endif
|
2011-11-17 15:11:58 +07:00
|
|
|
#ifdef CONFIG_USER_NS
|
|
|
|
REG("uid_map", S_IRUGO|S_IWUSR, proc_uid_map_operations),
|
|
|
|
REG("gid_map", S_IRUGO|S_IWUSR, proc_gid_map_operations),
|
2012-08-30 15:24:05 +07:00
|
|
|
REG("projid_map", S_IRUGO|S_IWUSR, proc_projid_map_operations),
|
2014-12-03 01:27:26 +07:00
|
|
|
REG("setgroups", S_IRUGO|S_IWUSR, proc_setgroups_operations),
|
2011-11-17 15:11:58 +07:00
|
|
|
#endif
|
2017-02-14 08:42:41 +07:00
|
|
|
#ifdef CONFIG_LIVEPATCH
|
|
|
|
ONE("patch_state", S_IRUSR, proc_pid_patch_state),
|
|
|
|
#endif
|
2006-10-02 16:17:05 +07:00
|
|
|
};
|
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
static int proc_tid_base_readdir(struct file *file, struct dir_context *ctx)
|
2006-10-02 16:17:05 +07:00
|
|
|
{
|
2013-05-16 23:07:31 +07:00
|
|
|
return proc_pident_readdir(file, ctx,
|
|
|
|
tid_base_stuff, ARRAY_SIZE(tid_base_stuff));
|
2006-10-02 16:17:05 +07:00
|
|
|
}
|
|
|
|
|
2012-06-11 04:13:09 +07:00
|
|
|
static struct dentry *proc_tid_base_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
|
|
|
|
{
|
2006-10-02 16:18:56 +07:00
|
|
|
return proc_pident_lookup(dir, dentry,
|
|
|
|
tid_base_stuff, ARRAY_SIZE(tid_base_stuff));
|
2006-10-02 16:17:05 +07:00
|
|
|
}
|
|
|
|
|
2007-02-12 15:55:34 +07:00
|
|
|
static const struct file_operations proc_tid_base_operations = {
|
2006-10-02 16:17:05 +07:00
|
|
|
.read = generic_read_dir,
|
2016-04-21 04:13:54 +07:00
|
|
|
.iterate_shared = proc_tid_base_readdir,
|
|
|
|
.llseek = generic_file_llseek,
|
2006-10-02 16:17:05 +07:00
|
|
|
};
|
|
|
|
|
2007-02-12 15:55:40 +07:00
|
|
|
static const struct inode_operations proc_tid_base_inode_operations = {
|
2006-10-02 16:17:05 +07:00
|
|
|
.lookup = proc_tid_base_lookup,
|
|
|
|
.getattr = pid_getattr,
|
|
|
|
.setattr = proc_setattr,
|
|
|
|
};
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
static struct dentry *proc_task_instantiate(struct dentry *dentry,
|
|
|
|
struct task_struct *task, const void *ptr)
|
2006-10-02 16:18:49 +07:00
|
|
|
{
|
|
|
|
struct inode *inode;
|
2018-05-03 20:21:05 +07:00
|
|
|
inode = proc_pid_make_inode(dentry->d_sb, task, S_IFDIR | S_IRUGO | S_IXUGO);
|
2006-10-02 16:18:49 +07:00
|
|
|
if (!inode)
|
2018-05-03 20:21:05 +07:00
|
|
|
return ERR_PTR(-ENOENT);
|
2018-05-03 08:26:16 +07:00
|
|
|
|
2006-10-02 16:18:49 +07:00
|
|
|
inode->i_op = &proc_tid_base_inode_operations;
|
|
|
|
inode->i_fop = &proc_tid_base_operations;
|
2018-05-03 08:26:16 +07:00
|
|
|
inode->i_flags |= S_IMMUTABLE;
|
2008-06-06 12:46:53 +07:00
|
|
|
|
2016-12-13 07:45:32 +07:00
|
|
|
set_nlink(inode, nlink_tid);
|
2018-05-03 08:26:16 +07:00
|
|
|
pid_update_inode(task, inode);
|
2006-10-02 16:18:49 +07:00
|
|
|
|
2011-01-07 13:49:55 +07:00
|
|
|
d_set_d_op(dentry, &pid_dentry_operations);
|
2018-05-03 20:21:05 +07:00
|
|
|
return d_splice_alias(inode, dentry);
|
2006-10-02 16:18:49 +07:00
|
|
|
}
|
|
|
|
|
2012-06-11 04:13:09 +07:00
|
|
|
static struct dentry *proc_task_lookup(struct inode *dir, struct dentry * dentry, unsigned int flags)
|
2006-10-02 16:17:05 +07:00
|
|
|
{
|
|
|
|
struct task_struct *task;
|
|
|
|
struct task_struct *leader = get_proc_task(dir);
|
|
|
|
unsigned tid;
|
2007-10-19 13:40:14 +07:00
|
|
|
struct pid_namespace *ns;
|
2018-05-03 20:21:05 +07:00
|
|
|
struct dentry *result = ERR_PTR(-ENOENT);
|
2006-10-02 16:17:05 +07:00
|
|
|
|
|
|
|
if (!leader)
|
|
|
|
goto out_no_task;
|
|
|
|
|
2014-08-09 04:21:25 +07:00
|
|
|
tid = name_to_int(&dentry->d_name);
|
2006-10-02 16:17:05 +07:00
|
|
|
if (tid == ~0U)
|
|
|
|
goto out;
|
|
|
|
|
2007-10-19 13:40:14 +07:00
|
|
|
ns = dentry->d_sb->s_fs_info;
|
2006-10-02 16:17:05 +07:00
|
|
|
rcu_read_lock();
|
2007-10-19 13:40:14 +07:00
|
|
|
task = find_task_by_pid_ns(tid, ns);
|
2006-10-02 16:17:05 +07:00
|
|
|
if (task)
|
|
|
|
get_task_struct(task);
|
|
|
|
rcu_read_unlock();
|
|
|
|
if (!task)
|
|
|
|
goto out;
|
2007-10-19 13:40:18 +07:00
|
|
|
if (!same_thread_group(leader, task))
|
2006-10-02 16:17:05 +07:00
|
|
|
goto out_drop_task;
|
|
|
|
|
2018-05-03 20:21:05 +07:00
|
|
|
result = proc_task_instantiate(dentry, task, NULL);
|
2006-10-02 16:17:05 +07:00
|
|
|
out_drop_task:
|
|
|
|
put_task_struct(task);
|
|
|
|
out:
|
|
|
|
put_task_struct(leader);
|
|
|
|
out_no_task:
|
2018-05-03 20:21:05 +07:00
|
|
|
return result;
|
2006-10-02 16:17:05 +07:00
|
|
|
}
|
|
|
|
|
2006-06-26 14:25:50 +07:00
|
|
|
/*
|
|
|
|
* Find the first tid of a thread group to return to user space.
|
|
|
|
*
|
|
|
|
* Usually this is just the thread group leader, but if the users
|
|
|
|
* buffer was too small or there was a seek into the middle of the
|
|
|
|
* directory we have more work todo.
|
|
|
|
*
|
|
|
|
* In the case of a short read we start with find_task_by_pid.
|
|
|
|
*
|
|
|
|
* In the case of a seek we start with the leader and walk nr
|
|
|
|
* threads past it.
|
|
|
|
*/
|
2014-01-24 06:55:40 +07:00
|
|
|
static struct task_struct *first_tid(struct pid *pid, int tid, loff_t f_pos,
|
|
|
|
struct pid_namespace *ns)
|
2006-06-26 14:25:50 +07:00
|
|
|
{
|
2014-01-24 06:55:39 +07:00
|
|
|
struct task_struct *pos, *task;
|
2014-01-24 06:55:40 +07:00
|
|
|
unsigned long nr = f_pos;
|
|
|
|
|
|
|
|
if (nr != f_pos) /* 32bit overflow? */
|
|
|
|
return NULL;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2006-06-26 14:26:01 +07:00
|
|
|
rcu_read_lock();
|
2014-01-24 06:55:39 +07:00
|
|
|
task = pid_task(pid, PIDTYPE_PID);
|
|
|
|
if (!task)
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
/* Attempt to start with the tid of a thread */
|
2014-01-24 06:55:40 +07:00
|
|
|
if (tid && nr) {
|
2007-10-19 13:40:14 +07:00
|
|
|
pos = find_task_by_pid_ns(tid, ns);
|
2014-01-24 06:55:39 +07:00
|
|
|
if (pos && same_thread_group(pos, task))
|
2006-06-26 14:26:01 +07:00
|
|
|
goto found;
|
2006-06-26 14:25:50 +07:00
|
|
|
}
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2006-06-26 14:25:50 +07:00
|
|
|
/* If nr exceeds the number of threads there is nothing todo */
|
2014-01-24 06:55:40 +07:00
|
|
|
if (nr >= get_nr_threads(task))
|
2014-01-24 06:55:38 +07:00
|
|
|
goto fail;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2006-06-26 14:26:01 +07:00
|
|
|
/* If we haven't found our starting place yet start
|
|
|
|
* with the leader and walk nr threads forward.
|
2006-06-26 14:25:50 +07:00
|
|
|
*/
|
2014-01-24 06:55:39 +07:00
|
|
|
pos = task = task->group_leader;
|
2014-01-24 06:55:38 +07:00
|
|
|
do {
|
2014-01-24 06:55:40 +07:00
|
|
|
if (!nr--)
|
2014-01-24 06:55:38 +07:00
|
|
|
goto found;
|
2014-01-24 06:55:39 +07:00
|
|
|
} while_each_thread(task, pos);
|
2014-01-24 06:55:38 +07:00
|
|
|
fail:
|
|
|
|
pos = NULL;
|
|
|
|
goto out;
|
2006-06-26 14:26:01 +07:00
|
|
|
found:
|
|
|
|
get_task_struct(pos);
|
|
|
|
out:
|
2006-06-26 14:26:01 +07:00
|
|
|
rcu_read_unlock();
|
2006-06-26 14:25:50 +07:00
|
|
|
return pos;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Find the next thread in the thread list.
|
|
|
|
* Return NULL if there is an error or no next thread.
|
|
|
|
*
|
|
|
|
* The reference to the input task_struct is released.
|
|
|
|
*/
|
|
|
|
static struct task_struct *next_tid(struct task_struct *start)
|
|
|
|
{
|
2006-06-26 14:26:02 +07:00
|
|
|
struct task_struct *pos = NULL;
|
2006-06-26 14:26:01 +07:00
|
|
|
rcu_read_lock();
|
2006-06-26 14:26:02 +07:00
|
|
|
if (pid_alive(start)) {
|
2006-06-26 14:25:50 +07:00
|
|
|
pos = next_thread(start);
|
2006-06-26 14:26:02 +07:00
|
|
|
if (thread_group_leader(pos))
|
|
|
|
pos = NULL;
|
|
|
|
else
|
|
|
|
get_task_struct(pos);
|
|
|
|
}
|
2006-06-26 14:26:01 +07:00
|
|
|
rcu_read_unlock();
|
2006-06-26 14:25:50 +07:00
|
|
|
put_task_struct(start);
|
|
|
|
return pos;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/* for the /proc/TGID/task/ directories */
|
2013-05-16 23:07:31 +07:00
|
|
|
static int proc_task_readdir(struct file *file, struct dir_context *ctx)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
2014-01-24 06:55:39 +07:00
|
|
|
struct inode *inode = file_inode(file);
|
|
|
|
struct task_struct *task;
|
2007-10-19 13:40:14 +07:00
|
|
|
struct pid_namespace *ns;
|
2013-05-16 23:07:31 +07:00
|
|
|
int tid;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2014-01-24 06:55:39 +07:00
|
|
|
if (proc_inode_is_dead(inode))
|
2013-05-16 23:07:31 +07:00
|
|
|
return -ENOENT;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
if (!dir_emit_dots(file, ctx))
|
2014-01-24 06:55:39 +07:00
|
|
|
return 0;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2006-06-26 14:25:50 +07:00
|
|
|
/* f_version caches the tgid value that the last readdir call couldn't
|
|
|
|
* return. lseek aka telldir automagically resets f_version to 0.
|
|
|
|
*/
|
2018-05-16 12:19:01 +07:00
|
|
|
ns = proc_pid_ns(inode);
|
2013-05-16 23:07:31 +07:00
|
|
|
tid = (int)file->f_version;
|
|
|
|
file->f_version = 0;
|
2014-01-24 06:55:39 +07:00
|
|
|
for (task = first_tid(proc_pid(inode), tid, ctx->pos - 2, ns);
|
2006-06-26 14:25:50 +07:00
|
|
|
task;
|
2013-05-16 23:07:31 +07:00
|
|
|
task = next_tid(task), ctx->pos++) {
|
2018-02-07 06:36:51 +07:00
|
|
|
char name[10 + 1];
|
2018-06-08 07:10:10 +07:00
|
|
|
unsigned int len;
|
2007-10-19 13:40:14 +07:00
|
|
|
tid = task_pid_nr_ns(task, ns);
|
2018-02-07 06:36:51 +07:00
|
|
|
len = snprintf(name, sizeof(name), "%u", tid);
|
2013-05-16 23:07:31 +07:00
|
|
|
if (!proc_fill_cache(file, ctx, name, len,
|
|
|
|
proc_task_instantiate, task, NULL)) {
|
2006-06-26 14:25:50 +07:00
|
|
|
/* returning this tgid failed, save it as the first
|
|
|
|
* pid for the next readir call */
|
2013-05-16 23:07:31 +07:00
|
|
|
file->f_version = (u64)tid;
|
2006-06-26 14:25:50 +07:00
|
|
|
put_task_struct(task);
|
2005-04-17 05:20:36 +07:00
|
|
|
break;
|
2006-06-26 14:25:50 +07:00
|
|
|
}
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
2014-01-24 06:55:39 +07:00
|
|
|
|
2013-05-16 23:07:31 +07:00
|
|
|
return 0;
|
2005-04-17 05:20:36 +07:00
|
|
|
}
|
2006-06-26 14:25:47 +07:00
|
|
|
|
statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31 23:46:22 +07:00
|
|
|
static int proc_task_getattr(const struct path *path, struct kstat *stat,
|
|
|
|
u32 request_mask, unsigned int query_flags)
|
2006-06-26 14:25:47 +07:00
|
|
|
{
|
statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31 23:46:22 +07:00
|
|
|
struct inode *inode = d_inode(path->dentry);
|
2006-06-26 14:25:55 +07:00
|
|
|
struct task_struct *p = get_proc_task(inode);
|
2006-06-26 14:25:47 +07:00
|
|
|
generic_fillattr(inode, stat);
|
|
|
|
|
2006-06-26 14:25:55 +07:00
|
|
|
if (p) {
|
|
|
|
stat->nlink += get_nr_threads(p);
|
|
|
|
put_task_struct(p);
|
2006-06-26 14:25:47 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2006-10-02 16:17:05 +07:00
|
|
|
|
2007-02-12 15:55:40 +07:00
|
|
|
static const struct inode_operations proc_task_inode_operations = {
|
2006-10-02 16:17:05 +07:00
|
|
|
.lookup = proc_task_lookup,
|
|
|
|
.getattr = proc_task_getattr,
|
|
|
|
.setattr = proc_setattr,
|
procfs: add hidepid= and gid= mount options
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:11:31 +07:00
|
|
|
.permission = proc_pid_permission,
|
2006-10-02 16:17:05 +07:00
|
|
|
};
|
|
|
|
|
2007-02-12 15:55:34 +07:00
|
|
|
static const struct file_operations proc_task_operations = {
|
2006-10-02 16:17:05 +07:00
|
|
|
.read = generic_read_dir,
|
2016-04-21 04:13:54 +07:00
|
|
|
.iterate_shared = proc_task_readdir,
|
|
|
|
.llseek = generic_file_llseek,
|
2006-10-02 16:17:05 +07:00
|
|
|
};
|
2016-12-13 07:45:32 +07:00
|
|
|
|
|
|
|
void __init set_proc_pid_nlink(void)
|
|
|
|
{
|
|
|
|
nlink_tid = pid_entry_nlink(tid_base_stuff, ARRAY_SIZE(tid_base_stuff));
|
|
|
|
nlink_tgid = pid_entry_nlink(tgid_base_stuff, ARRAY_SIZE(tgid_base_stuff));
|
|
|
|
}
|