linux_dsm_epyc7002/drivers/gpu/drm/tilcdc/Makefile

ccflags-y := -Iinclude/drm
ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))
	ccflags-y += -Werror
endif

tilcdc-y := \
	tilcdc_crtc.o \
	tilcdc_tfp410.o \
	tilcdc_slave.o \
	tilcdc_panel.o \
	tilcdc_drv.o

obj-$(CONFIG_DRM_TILCDC)	+= tilcdc.o
drivers/gpu/drm/tilcdc: Makefile, only -Werror when no -W* in EXTRA_CFLAGS When make with EXTRA_CFLAGS=-W, it will report error. so give a check in Makefile. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 2013-03-10 12:04:13 +07:00			`ccflags-y := -Iinclude/drm`
			`ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))`
			`ccflags-y += -Werror`
			`endif`
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net> 2013-01-09 04:04:28 +07:00
			`tilcdc-y := \`
			`tilcdc_crtc.o \`
			`tilcdc_tfp410.o \`
drm/tilcdc: add encoder slave (v2) Add output panel driver for i2c encoder slaves. v1: original v2: add DT bindings docs, and minor updates for review comments Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net> 2013-01-23 05:02:21 +07:00			`tilcdc_slave.o \`
drm/tilcdc: add support for LCD panels (v5) Add an output panel driver for LCD panels. Tested with LCD3 cape on beaglebone. v1: original v2: s/of_find_node_by_name()/of_get_child_by_name()/ from Pantelis Antoniou v3: add backlight support v4: rebase to latest of video timing helpers v5: remove some unneeded fields from panel-info struct, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net> 2012-12-19 06:34:16 +07:00			`tilcdc_panel.o \`
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net> 2013-01-09 04:04:28 +07:00			`tilcdc_drv.o`

			`obj-$(CONFIG_DRM_TILCDC) += tilcdc.o`