linux_dsm_epyc7002/kernel/Makefile

210 lines
7.4 KiB
Makefile
Raw Normal View History

#
# Makefile for the linux kernel.
#
obj-y = fork.o exec_domain.o panic.o \
cpu.o exit.o softirq.o resource.o \
sysctl.o sysctl_binary.o capability.o ptrace.o user.o \
task_work_add: generic process-context callbacks Provide a simple mechanism that allows running code in the (nonatomic) context of the arbitrary task. The caller does task_work_add(task, task_work) and this task executes task_work->func() either from do_notify_resume() or from do_exit(). The callback can rely on PF_EXITING to detect the latter case. "struct task_work" can be embedded in another struct, still it has "void *data" to handle the most common/simple case. This allows us to kill the ->replacement_session_keyring hack, and potentially this can have more users. Performance-wise, this adds 2 "unlikely(!hlist_empty())" checks into tracehook_notify_resume() and do_exit(). But at the same time we can remove the "replacement_session_keyring != NULL" checks from arch/*/signal.c and exit_creds(). Note: task_work_add/task_work_run abuses ->pi_lock. This is only because this lock is already used by lookup_pi_state() to synchronize with do_exit() setting PF_EXITING. Fortunately the scope of this lock in task_work.c is really tiny, and the code is unlikely anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Gordeev <agordeev@redhat.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Smith <dsmith@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-11 07:59:07 +07:00
signal.o sys.o kmod.o workqueue.o pid.o task_work.o \
extable.o params.o \
kthread.o sys_ni.o nsproxy.o \
notifier.o ksysfs.o cred.o reboot.o \
kernel: conditionally support non-root users, groups and capabilities There are a lot of embedded systems that run most or all of their functionality in init, running as root:root. For these systems, supporting multiple users is not necessary. This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for non-root users, non-root groups, and capabilities optional. It is enabled under CONFIG_EXPERT menu. When this symbol is not defined, UID and GID are zero in any possible case and processes always have all capabilities. The following syscalls are compiled out: setuid, setregid, setgid, setreuid, setresuid, getresuid, setresgid, getresgid, setgroups, getgroups, setfsuid, setfsgid, capget, capset. Also, groups.c is compiled out completely. In kernel/capability.c, capable function was moved in order to avoid adding two ifdef blocks. This change saves about 25 KB on a defconfig build. The most minimal kernels have total text sizes in the high hundreds of kB rather than low MB. (The 25k goes down a bit with allnoconfig, but not that much. The kernel was booted in Qemu. All the common functionalities work. Adding users/groups is not possible, failing with -ENOSYS. Bloat-o-meter output: add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Iulia Manda <iulia.manda21@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16 06:16:41 +07:00
async.o range.o smpboot.o
obj-$(CONFIG_MULTIUSER) += groups.o
ifdef CONFIG_FUNCTION_TRACER
# Do not trace debug files and internal ftrace files
CFLAGS_REMOVE_cgroup-debug.o = $(CC_FLAGS_FTRACE)
CFLAGS_REMOVE_irq_work.o = $(CC_FLAGS_FTRACE)
endif
# cond_syscall is currently not LTO compatible
CFLAGS_sys_ni.o = $(DISABLE_LTO)
obj-y += sched/
obj-y += locking/
obj-y += power/
obj-y += printk/
obj-y += irq/
obj-y += rcu/
obj-y += livepatch/
obj-$(CONFIG_CHECKPOINT_RESTORE) += kcmp.o
obj-$(CONFIG_FREEZER) += freezer.o
obj-$(CONFIG_PROFILING) += profile.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += time/
obj-$(CONFIG_FUTEX) += futex.o
ifeq ($(CONFIG_COMPAT),y)
obj-$(CONFIG_FUTEX) += futex_compat.o
endif
obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o
obj-$(CONFIG_SMP) += smp.o
ifneq ($(CONFIG_SMP),y)
obj-y += up.o
endif
obj-$(CONFIG_UID16) += uid16.o
obj-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += system_keyring.o system_certificates.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_MODULE_SIG) += module_signing.o
obj-$(CONFIG_KALLSYMS) += kallsyms.o
obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_BACKTRACE_SELF_TEST) += backtracetest.o
obj-$(CONFIG_COMPAT) += compat.o
Task Control Groups: basic task cgroup framework Generic Process Control Groups -------------------------- There have recently been various proposals floating around for resource management/accounting and other task grouping subsystems in the kernel, including ResGroups, User BeanCounters, NSProxy cgroups, and others. These all need the basic abstraction of being able to group together multiple processes in an aggregate, in order to track/limit the resources permitted to those processes, or control other behaviour of the processes, and all implement this grouping in different ways. This patchset provides a framework for tracking and grouping processes into arbitrary "cgroups" and assigning arbitrary state to those groupings, in order to control the behaviour of the cgroup as an aggregate. The intention is that the various resource management and virtualization/cgroup efforts can also become task cgroup clients, with the result that: - the userspace APIs are (somewhat) normalised - it's easier to test e.g. the ResGroups CPU controller in conjunction with the BeanCounters memory controller, or use either of them as the resource-control portion of a virtual server system. - the additional kernel footprint of any of the competing resource management systems is substantially reduced, since it doesn't need to provide process grouping/containment, hence improving their chances of getting into the kernel This patch: Add the main task cgroups framework - the cgroup filesystem, and the basic structures for tracking membership and associating subsystem state objects to tasks. Signed-off-by: Paul Menage <menage@google.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 13:39:30 +07:00
obj-$(CONFIG_CGROUPS) += cgroup.o
container freezer: implement freezer cgroup subsystem This patch implements a new freezer subsystem in the control groups framework. It provides a way to stop and resume execution of all tasks in a cgroup by writing in the cgroup filesystem. The freezer subsystem in the container filesystem defines a file named freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the cgroup. Subsequently writing "RUNNING" will unfreeze the tasks in the cgroup. Reading will return the current state. * Examples of usage : # mkdir /containers/freezer # mount -t cgroup -ofreezer freezer /containers # mkdir /containers/0 # echo $some_pid > /containers/0/tasks to get status of the freezer subsystem : # cat /containers/0/freezer.state RUNNING to freeze all tasks in the container : # echo FROZEN > /containers/0/freezer.state # cat /containers/0/freezer.state FREEZING # cat /containers/0/freezer.state FROZEN to unfreeze all tasks in the container : # echo RUNNING > /containers/0/freezer.state # cat /containers/0/freezer.state RUNNING This is the basic mechanism which should do the right thing for user space task in a simple scenario. It's important to note that freezing can be incomplete. In that case we return EBUSY. This means that some tasks in the cgroup are busy doing something that prevents us from completely freezing the cgroup at this time. After EBUSY, the cgroup will remain partially frozen -- reflected by freezer.state reporting "FREEZING" when read. The state will remain "FREEZING" until one of these things happens: 1) Userspace cancels the freezing operation by writing "RUNNING" to the freezer.state file 2) Userspace retries the freezing operation by writing "FROZEN" to the freezer.state file (writing "FREEZING" is not legal and returns EIO) 3) The tasks that blocked the cgroup from entering the "FROZEN" state disappear from the cgroup's set of tasks. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: export thaw_process] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Tested-by: Matt Helsley <matthltc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:27:21 +07:00
obj-$(CONFIG_CGROUP_FREEZER) += cgroup_freezer.o
obj-$(CONFIG_CPUSETS) += cpuset.o
obj-$(CONFIG_UTS_NS) += utsname.o
obj-$(CONFIG_USER_NS) += user_namespace.o
obj-$(CONFIG_PID_NS) += pid_namespace.o
obj-$(CONFIG_IKCONFIG) += configs.o
obj-$(CONFIG_SMP) += stop_machine.o
obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
obj-$(CONFIG_AUDIT) += audit.o auditfilter.o
obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
obj-$(CONFIG_AUDIT_WATCH) += audit_watch.o
obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
obj-$(CONFIG_GCOV_KERNEL) += gcov/
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_KGDB) += debug/
obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
lockup_detector: Combine nmi_watchdog and softlockup detector The new nmi_watchdog (which uses the perf event subsystem) is very similar in structure to the softlockup detector. Using Ingo's suggestion, I combined the two functionalities into one file: kernel/watchdog.c. Now both the nmi_watchdog (or hardlockup detector) and softlockup detector sit on top of the perf event subsystem, which is run every 60 seconds or so to see if there are any lockups. To detect hardlockups, cpus not responding to interrupts, I implemented an hrtimer that runs 5 times for every perf event overflow event. If that stops counting on a cpu, then the cpu is most likely in trouble. To detect softlockups, tasks not yielding to the scheduler, I used the previous kthread idea that now gets kicked every time the hrtimer fires. If the kthread isn't being scheduled neither is anyone else and the warning is printed to the console. I tested this on x86_64 and both the softlockup and hardlockup paths work. V2: - cleaned up the Kconfig and softlockup combination - surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI - seperated out the softlockup case from perf event subsystem - re-arranged the enabling/disabling nmi watchdog from proc space - added cpumasks for hardlockup failure cases - removed fallback to soft events if no PMU exists for hard events V3: - comment cleanups - drop support for older softlockup code - per_cpu cleanups - completely remove software clock base hardlockup detector - use per_cpu masking on hard/soft lockup detection - #ifdef cleanups - rename config option NMI_WATCHDOG to LOCKUP_DETECTOR - documentation additions V4: - documentation fixes - convert per_cpu to __get_cpu_var - powerpc compile fixes V5: - split apart warn flags for hard and soft lockups TODO: - figure out how to make an arch-agnostic clock2cycles call (if possible) to feed into perf events as a sample period [fweisbec: merged conflict patch] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-08 04:11:44 +07:00
obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
obj-$(CONFIG_SECCOMP) += seccomp.o
obj-$(CONFIG_RELAY) += relay.o
obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o
tracing: Kernel Tracepoints Implementation of kernel tracepoints. Inspired from the Linux Kernel Markers. Allows complete typing verification by declaring both tracing statement inline functions and probe registration/unregistration static inline functions within the same macro "DEFINE_TRACE". No format string is required. See the tracepoint Documentation and Samples patches for usage examples. Taken from the documentation patch : "A tracepoint placed in code provides a hook to call a function (probe) that you can provide at runtime. A tracepoint can be "on" (a probe is connected to it) or "off" (no probe is attached). When a tracepoint is "off" it has no effect, except for adding a tiny time penalty (checking a condition for a branch) and space penalty (adding a few bytes for the function call at the end of the instrumented function and adds a data structure in a separate section). When a tracepoint is "on", the function you provide is called each time the tracepoint is executed, in the execution context of the caller. When the function provided ends its execution, it returns to the caller (continuing from the tracepoint site). You can put tracepoints at important locations in the code. They are lightweight hooks that can pass an arbitrary number of parameters, which prototypes are described in a tracepoint declaration placed in a header file." Addition and removal of tracepoints is synchronized by RCU using the scheduler (and preempt_disable) as guarantees to find a quiescent state (this is really RCU "classic"). The update side uses rcu_barrier_sched() with call_rcu_sched() and the read/execute side uses "preempt_disable()/preempt_enable()". We make sure the previous array containing probes, which has been scheduled for deletion by the rcu callback, is indeed freed before we proceed to the next update. It therefore limits the rate of modification of a single tracepoint to one update per RCU period. The objective here is to permit fast batch add/removal of probes on _different_ tracepoints. Changelog : - Use #name ":" #proto as string to identify the tracepoint in the tracepoint table. This will make sure not type mismatch happens due to connexion of a probe with the wrong type to a tracepoint declared with the same name in a different header. - Add tracepoint_entry_free_old. - Change __TO_TRACE to get rid of the 'i' iterator. Masami Hiramatsu <mhiramat@redhat.com> : Tested on x86-64. Performance impact of a tracepoint : same as markers, except that it adds about 70 bytes of instructions in an unlikely branch of each instrumented function (the for loop, the stack setup and the function call). It currently adds a memory read, a test and a conditional branch at the instrumentation site (in the hot path). Immediate values will eventually change this into a load immediate, test and branch, which removes the memory read which will make the i-cache impact smaller (changing the memory read for a load immediate removes 3-4 bytes per site on x86_32 (depending on mov prefixes), or 7-8 bytes on x86_64, it also saves the d-cache hit). About the performance impact of tracepoints (which is comparable to markers), even without immediate values optimizations, tests done by Hideo Aoki on ia64 show no regression. His test case was using hackbench on a kernel where scheduler instrumentation (about 5 events in code scheduler code) was added. Quoting Hideo Aoki about Markers : I evaluated overhead of kernel marker using linux-2.6-sched-fixes git tree, which includes several markers for LTTng, using an ia64 server. While the immediate trace mark feature isn't implemented on ia64, there is no major performance regression. So, I think that we don't have any issues to propose merging marker point patches into Linus's tree from the viewpoint of performance impact. I prepared two kernels to evaluate. The first one was compiled without CONFIG_MARKERS. The second one was enabled CONFIG_MARKERS. I downloaded the original hackbench from the following URL: http://devresources.linux-foundation.org/craiger/hackbench/src/hackbench.c I ran hackbench 5 times in each condition and calculated the average and difference between the kernels. The parameter of hackbench: every 50 from 50 to 800 The number of CPUs of the server: 2, 4, and 8 Below is the results. As you can see, major performance regression wasn't found in any case. Even if number of processes increases, differences between marker-enabled kernel and marker- disabled kernel doesn't increase. Moreover, if number of CPUs increases, the differences doesn't increase either. Curiously, marker-enabled kernel is better than marker-disabled kernel in more than half cases, although I guess it comes from the difference of memory access pattern. * 2 CPUs Number of | without | with | diff | diff | processes | Marker [Sec] | Marker [Sec] | [Sec] | [%] | -------------------------------------------------------------- 50 | 4.811 | 4.872 | +0.061 | +1.27 | 100 | 9.854 | 10.309 | +0.454 | +4.61 | 150 | 15.602 | 15.040 | -0.562 | -3.6 | 200 | 20.489 | 20.380 | -0.109 | -0.53 | 250 | 25.798 | 25.652 | -0.146 | -0.56 | 300 | 31.260 | 30.797 | -0.463 | -1.48 | 350 | 36.121 | 35.770 | -0.351 | -0.97 | 400 | 42.288 | 42.102 | -0.186 | -0.44 | 450 | 47.778 | 47.253 | -0.526 | -1.1 | 500 | 51.953 | 52.278 | +0.325 | +0.63 | 550 | 58.401 | 57.700 | -0.701 | -1.2 | 600 | 63.334 | 63.222 | -0.112 | -0.18 | 650 | 68.816 | 68.511 | -0.306 | -0.44 | 700 | 74.667 | 74.088 | -0.579 | -0.78 | 750 | 78.612 | 79.582 | +0.970 | +1.23 | 800 | 85.431 | 85.263 | -0.168 | -0.2 | -------------------------------------------------------------- * 4 CPUs Number of | without | with | diff | diff | processes | Marker [Sec] | Marker [Sec] | [Sec] | [%] | -------------------------------------------------------------- 50 | 2.586 | 2.584 | -0.003 | -0.1 | 100 | 5.254 | 5.283 | +0.030 | +0.56 | 150 | 8.012 | 8.074 | +0.061 | +0.76 | 200 | 11.172 | 11.000 | -0.172 | -1.54 | 250 | 13.917 | 14.036 | +0.119 | +0.86 | 300 | 16.905 | 16.543 | -0.362 | -2.14 | 350 | 19.901 | 20.036 | +0.135 | +0.68 | 400 | 22.908 | 23.094 | +0.186 | +0.81 | 450 | 26.273 | 26.101 | -0.172 | -0.66 | 500 | 29.554 | 29.092 | -0.461 | -1.56 | 550 | 32.377 | 32.274 | -0.103 | -0.32 | 600 | 35.855 | 35.322 | -0.533 | -1.49 | 650 | 39.192 | 38.388 | -0.804 | -2.05 | 700 | 41.744 | 41.719 | -0.025 | -0.06 | 750 | 45.016 | 44.496 | -0.520 | -1.16 | 800 | 48.212 | 47.603 | -0.609 | -1.26 | -------------------------------------------------------------- * 8 CPUs Number of | without | with | diff | diff | processes | Marker [Sec] | Marker [Sec] | [Sec] | [%] | -------------------------------------------------------------- 50 | 2.094 | 2.072 | -0.022 | -1.07 | 100 | 4.162 | 4.273 | +0.111 | +2.66 | 150 | 6.485 | 6.540 | +0.055 | +0.84 | 200 | 8.556 | 8.478 | -0.078 | -0.91 | 250 | 10.458 | 10.258 | -0.200 | -1.91 | 300 | 12.425 | 12.750 | +0.325 | +2.62 | 350 | 14.807 | 14.839 | +0.032 | +0.22 | 400 | 16.801 | 16.959 | +0.158 | +0.94 | 450 | 19.478 | 19.009 | -0.470 | -2.41 | 500 | 21.296 | 21.504 | +0.208 | +0.98 | 550 | 23.842 | 23.979 | +0.137 | +0.57 | 600 | 26.309 | 26.111 | -0.198 | -0.75 | 650 | 28.705 | 28.446 | -0.259 | -0.9 | 700 | 31.233 | 31.394 | +0.161 | +0.52 | 750 | 34.064 | 33.720 | -0.344 | -1.01 | 800 | 36.320 | 36.114 | -0.206 | -0.57 | -------------------------------------------------------------- Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: 'Peter Zijlstra' <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 23:16:16 +07:00
obj-$(CONFIG_TRACEPOINTS) += tracepoint.o
obj-$(CONFIG_LATENCYTOP) += latencytop.o
obj-$(CONFIG_BINFMT_ELF) += elfcore.o
obj-$(CONFIG_COMPAT_BINFMT_ELF) += elfcore.o
obj-$(CONFIG_BINFMT_ELF_FDPIC) += elfcore.o
obj-$(CONFIG_FUNCTION_TRACER) += trace/
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 02:20:42 +07:00
obj-$(CONFIG_TRACING) += trace/
obj-$(CONFIG_TRACE_CLOCK) += trace/
obj-$(CONFIG_RING_BUFFER) += trace/
obj-$(CONFIG_TRACEPOINTS) += trace/
obj-$(CONFIG_IRQ_WORK) += irq_work.o
obj-$(CONFIG_CPU_PM) += cpu_pm.o
obj-$(CONFIG_BPF) += bpf/
obj-$(CONFIG_PERF_EVENTS) += events/
obj-$(CONFIG_USER_RETURN_NOTIFIER) += user-return-notifier.o
obj-$(CONFIG_PADATA) += padata.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
jump label: Reduce the cycle count by changing the link order In the course of testing jump labels for use with the CFS bandwidth controller, Paul Turner, discovered that using jump labels reduced the branch count and the instruction count, but did not reduce the cycle count or wall time. I noticed that having the jump_label.o included in the kernel but not used in any way still caused this increase in cycle count and wall time. Thus, I moved jump_label.o in the kernel/Makefile, thus changing the link order, and presumably moving it out of hot icache areas. This brought down the cycle count/time as expected. In addition to Paul's testing, I've tested the patch using a single 'static_branch()' in the getppid() path, and basically running tight loops of calls to getppid(). Here are my results for the branch disabled case: With jump labels turned on (CONFIG_JUMP_LABEL), branch disabled: Performance counter stats for 'bash -c /tmp/getppid;true' (50 runs): 3,969,510,217 instructions # 0.864 IPC ( +-0.000% ) 4,592,334,954 cycles ( +- 0.046% ) 751,634,470 branches ( +- 0.000% ) 1.722635797 seconds time elapsed ( +- 0.046% ) Jump labels turned off (CONFIG_JUMP_LABEL not set), branch disabled: Performance counter stats for 'bash -c /tmp/getppid;true' (50 runs): 4,009,611,846 instructions # 0.867 IPC ( +-0.000% ) 4,622,210,580 cycles ( +- 0.012% ) 771,662,904 branches ( +- 0.000% ) 1.734341454 seconds time elapsed ( +- 0.022% ) Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: rth@redhat.com Cc: a.p.zijlstra@chello.nl Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/20110805204040.GG2522@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Paul Turner <pjt@google.com>
2011-08-06 03:40:40 +07:00
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
obj-$(CONFIG_CONTEXT_TRACKING) += context_tracking.o
obj-$(CONFIG_TORTURE_TEST) += torture.o
$(obj)/configs.o: $(obj)/config_data.h
# config_data.h contains the same information as ikconfig.h but gzipped.
# Info from config_data can be extracted from /proc/config*
targets += config_data.gz
$(obj)/config_data.gz: $(KCONFIG_CONFIG) FORCE
$(call if_changed,gzip)
bin2c: move bin2c in scripts/basic This patch series does not do kernel signature verification yet. I plan to post another patch series for that. Now distributions are already signing PE/COFF bzImage with PKCS7 signature I plan to parse and verify those signatures. Primary goal of this patchset is to prepare groundwork so that kernel image can be signed and signatures be verified during kexec load. This should help with two things. - It should allow kexec/kdump on secureboot enabled machines. - In general it can help even without secureboot. By being able to verify kernel image signature in kexec, it should help with avoiding module signing restrictions. Matthew Garret showed how to boot into a custom kernel, modify first kernel's memory and then jump back to old kernel and bypass any policy one wants to. This patch (of 15): Kexec wants to use bin2c and it wants to use it really early in the build process. See arch/x86/purgatory/ code in later patches. So move bin2c in scripts/basic so that it can be built very early and be usable by arch/x86/purgatory/ Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:38 +07:00
filechk_ikconfiggz = (echo "static const char kernel_config_data[] __used = MAGIC_START"; cat $< | scripts/basic/bin2c; echo "MAGIC_END;")
targets += config_data.h
$(obj)/config_data.h: $(obj)/config_data.gz FORCE
$(call filechk,ikconfiggz)
avoid overflows in kernel/time.c When the conversion factor between jiffies and milli- or microseconds is not a single multiply or divide, as for the case of HZ == 300, we currently do a multiply followed by a divide. The intervening result, however, is subject to overflows, especially since the fraction is not simplified (for HZ == 300, we multiply by 300 and divide by 1000). This is exposed to the user when passing a large timeout to poll(), for example. This patch replaces the multiply-divide with a reciprocal multiplication on 32-bit platforms. When the input is an unsigned long, there is no portable way to do this on 64-bit platforms there is no portable way to do this since it requires a 128-bit intermediate result (which gcc does support on 64-bit platforms but may generate libgcc calls, e.g. on 64-bit s390), but since the output is a 32-bit integer in the cases affected, just simplify the multiply-divide (*3/10 instead of *300/1000). The reciprocal multiply used can have off-by-one errors in the upper half of the valid output range. This could be avoided at the expense of having to deal with a potential 65-bit intermediate result. Since the intent is to avoid overflow problems and most of the other time conversions are only semiexact, the off-by-one errors were considered an acceptable tradeoff. At Ralf Baechle's suggestion, this version uses a Perl script to compute the necessary constants. We already have dependencies on Perl for kernel compiles. This does, however, require the Perl module Math::BigInt, which is included in the standard Perl distribution starting with version 5.8.0. In order to support older versions of Perl, include a table of canned constants in the script itself, and structure the script so that Math::BigInt isn't required if pulling values from said table. Running the script requires that the HZ value is available from the Makefile. Thus, this patch also adds the Kconfig variable CONFIG_HZ to the architectures which didn't already have it (alpha, cris, frv, h8300, m32r, m68k, m68knommu, sparc, v850, and xtensa.) It does *not* touch the sh or sh64 architectures, since Paul Mundt has dealt with those separately in the sh tree. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Ralf Baechle <ralf@linux-mips.org>, Cc: Sam Ravnborg <sam@ravnborg.org>, Cc: Paul Mundt <lethal@linux-sh.org>, Cc: Richard Henderson <rth@twiddle.net>, Cc: Michael Starvik <starvik@axis.com>, Cc: David Howells <dhowells@redhat.com>, Cc: Yoshinori Sato <ysato@users.sourceforge.jp>, Cc: Hirokazu Takata <takata@linux-m32r.org>, Cc: Geert Uytterhoeven <geert@linux-m68k.org>, Cc: Roman Zippel <zippel@linux-m68k.org>, Cc: William L. Irwin <sparclinux@vger.kernel.org>, Cc: Chris Zankel <chris@zankel.net>, Cc: H. Peter Anvin <hpa@zytor.com>, Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 19:21:26 +07:00
###############################################################################
#
# Roll all the X.509 certificates that we can find together and pull them into
# the kernel so that they get loaded into the system trusted keyring during
# boot.
#
# We look in the source root and the build root for all files whose name ends
# in ".x509". Unfortunately, this will generate duplicate filenames, so we
# have make canonicalise the pathnames and then sort them to discard the
# duplicates.
#
###############################################################################
ifeq ($(CONFIG_SYSTEM_TRUSTED_KEYRING),y)
X509_CERTIFICATES-y := $(wildcard *.x509) $(wildcard $(srctree)/*.x509)
X509_CERTIFICATES-$(CONFIG_MODULE_SIG) += $(objtree)/signing_key.x509
X509_CERTIFICATES-raw := $(sort $(foreach CERT,$(X509_CERTIFICATES-y), \
$(or $(realpath $(CERT)),$(CERT))))
X509_CERTIFICATES := $(subst $(realpath $(objtree))/,,$(X509_CERTIFICATES-raw))
ifeq ($(X509_CERTIFICATES),)
$(warning *** No X.509 certificates found ***)
endif
ifneq ($(wildcard $(obj)/.x509.list),)
ifneq ($(shell cat $(obj)/.x509.list),$(X509_CERTIFICATES))
$(info X.509 certificate list changed)
$(shell rm $(obj)/.x509.list)
endif
endif
kernel/system_certificates.o: $(obj)/x509_certificate_list
quiet_cmd_x509certs = CERTS $@
cmd_x509certs = cat $(X509_CERTIFICATES) /dev/null >$@ $(foreach X509,$(X509_CERTIFICATES),; $(kecho) " - Including cert $(X509)")
targets += $(obj)/x509_certificate_list
$(obj)/x509_certificate_list: $(X509_CERTIFICATES) $(obj)/.x509.list
$(call if_changed,x509certs)
targets += $(obj)/.x509.list
$(obj)/.x509.list:
@echo $(X509_CERTIFICATES) >$@
endif
MODSIGN: Automatically generate module signing keys if missing Automatically generate keys for module signing if they're absent so that allyesconfig doesn't break. The builder should consider generating their own key and certificate, however, so that the keys are appropriately named. The private key for the module signer should be placed in signing_key.priv (unencrypted!) and the public key in an X.509 certificate as signing_key.x509. If a transient key is desired for signing the modules, a config file for 'openssl req' can be placed in x509.genkey, looking something like the following: [ req ] default_bits = 4096 distinguished_name = req_distinguished_name prompt = no x509_extensions = myexts [ req_distinguished_name ] O = Magarathea CN = Glacier signing key emailAddress = slartibartfast@magrathea.h2g2 [ myexts ] basicConstraints=critical,CA:FALSE keyUsage=digitalSignature subjectKeyIdentifier=hash authorityKeyIdentifier=hash The build process will use this to configure: openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \ -x509 -config x509.genkey \ -outform DER -out signing_key.x509 \ -keyout signing_key.priv to generate the key. Note that it is required that the X.509 certificate have a subjectKeyIdentifier and an authorityKeyIdentifier. Without those, the certificate will be rejected. These can be used to check the validity of a certificate. Note that 'make distclean' will remove signing_key.{priv,x509} and x509.genkey, whether or not they were generated automatically. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-26 16:09:51 +07:00
clean-files := x509_certificate_list .x509.list
MODSIGN: Automatically generate module signing keys if missing Automatically generate keys for module signing if they're absent so that allyesconfig doesn't break. The builder should consider generating their own key and certificate, however, so that the keys are appropriately named. The private key for the module signer should be placed in signing_key.priv (unencrypted!) and the public key in an X.509 certificate as signing_key.x509. If a transient key is desired for signing the modules, a config file for 'openssl req' can be placed in x509.genkey, looking something like the following: [ req ] default_bits = 4096 distinguished_name = req_distinguished_name prompt = no x509_extensions = myexts [ req_distinguished_name ] O = Magarathea CN = Glacier signing key emailAddress = slartibartfast@magrathea.h2g2 [ myexts ] basicConstraints=critical,CA:FALSE keyUsage=digitalSignature subjectKeyIdentifier=hash authorityKeyIdentifier=hash The build process will use this to configure: openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \ -x509 -config x509.genkey \ -outform DER -out signing_key.x509 \ -keyout signing_key.priv to generate the key. Note that it is required that the X.509 certificate have a subjectKeyIdentifier and an authorityKeyIdentifier. Without those, the certificate will be rejected. These can be used to check the validity of a certificate. Note that 'make distclean' will remove signing_key.{priv,x509} and x509.genkey, whether or not they were generated automatically. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-26 16:09:51 +07:00
ifeq ($(CONFIG_MODULE_SIG),y)
MODSIGN: Automatically generate module signing keys if missing Automatically generate keys for module signing if they're absent so that allyesconfig doesn't break. The builder should consider generating their own key and certificate, however, so that the keys are appropriately named. The private key for the module signer should be placed in signing_key.priv (unencrypted!) and the public key in an X.509 certificate as signing_key.x509. If a transient key is desired for signing the modules, a config file for 'openssl req' can be placed in x509.genkey, looking something like the following: [ req ] default_bits = 4096 distinguished_name = req_distinguished_name prompt = no x509_extensions = myexts [ req_distinguished_name ] O = Magarathea CN = Glacier signing key emailAddress = slartibartfast@magrathea.h2g2 [ myexts ] basicConstraints=critical,CA:FALSE keyUsage=digitalSignature subjectKeyIdentifier=hash authorityKeyIdentifier=hash The build process will use this to configure: openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \ -x509 -config x509.genkey \ -outform DER -out signing_key.x509 \ -keyout signing_key.priv to generate the key. Note that it is required that the X.509 certificate have a subjectKeyIdentifier and an authorityKeyIdentifier. Without those, the certificate will be rejected. These can be used to check the validity of a certificate. Note that 'make distclean' will remove signing_key.{priv,x509} and x509.genkey, whether or not they were generated automatically. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-26 16:09:51 +07:00
###############################################################################
#
# If module signing is requested, say by allyesconfig, but a key has not been
# supplied, then one will need to be generated to make sure the build does not
# fail and that the kernel may be used afterwards.
#
###############################################################################
ifndef CONFIG_MODULE_SIG_HASH
$(error Could not determine digest type to use from kernel config)
endif
MODSIGN: Automatically generate module signing keys if missing Automatically generate keys for module signing if they're absent so that allyesconfig doesn't break. The builder should consider generating their own key and certificate, however, so that the keys are appropriately named. The private key for the module signer should be placed in signing_key.priv (unencrypted!) and the public key in an X.509 certificate as signing_key.x509. If a transient key is desired for signing the modules, a config file for 'openssl req' can be placed in x509.genkey, looking something like the following: [ req ] default_bits = 4096 distinguished_name = req_distinguished_name prompt = no x509_extensions = myexts [ req_distinguished_name ] O = Magarathea CN = Glacier signing key emailAddress = slartibartfast@magrathea.h2g2 [ myexts ] basicConstraints=critical,CA:FALSE keyUsage=digitalSignature subjectKeyIdentifier=hash authorityKeyIdentifier=hash The build process will use this to configure: openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \ -x509 -config x509.genkey \ -outform DER -out signing_key.x509 \ -keyout signing_key.priv to generate the key. Note that it is required that the X.509 certificate have a subjectKeyIdentifier and an authorityKeyIdentifier. Without those, the certificate will be rejected. These can be used to check the validity of a certificate. Note that 'make distclean' will remove signing_key.{priv,x509} and x509.genkey, whether or not they were generated automatically. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-26 16:09:51 +07:00
signing_key.priv signing_key.x509: x509.genkey
@echo "###"
@echo "### Now generating an X.509 key pair to be used for signing modules."
@echo "###"
@echo "### If this takes a long time, you might wish to run rngd in the"
@echo "### background to keep the supply of entropy topped up. It"
@echo "### needs to be run as root, and uses a hardware random"
@echo "### number generator if one is available."
MODSIGN: Automatically generate module signing keys if missing Automatically generate keys for module signing if they're absent so that allyesconfig doesn't break. The builder should consider generating their own key and certificate, however, so that the keys are appropriately named. The private key for the module signer should be placed in signing_key.priv (unencrypted!) and the public key in an X.509 certificate as signing_key.x509. If a transient key is desired for signing the modules, a config file for 'openssl req' can be placed in x509.genkey, looking something like the following: [ req ] default_bits = 4096 distinguished_name = req_distinguished_name prompt = no x509_extensions = myexts [ req_distinguished_name ] O = Magarathea CN = Glacier signing key emailAddress = slartibartfast@magrathea.h2g2 [ myexts ] basicConstraints=critical,CA:FALSE keyUsage=digitalSignature subjectKeyIdentifier=hash authorityKeyIdentifier=hash The build process will use this to configure: openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \ -x509 -config x509.genkey \ -outform DER -out signing_key.x509 \ -keyout signing_key.priv to generate the key. Note that it is required that the X.509 certificate have a subjectKeyIdentifier and an authorityKeyIdentifier. Without those, the certificate will be rejected. These can be used to check the validity of a certificate. Note that 'make distclean' will remove signing_key.{priv,x509} and x509.genkey, whether or not they were generated automatically. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-26 16:09:51 +07:00
@echo "###"
openssl req -new -nodes -utf8 -$(CONFIG_MODULE_SIG_HASH) -days 36500 \
-batch -x509 -config x509.genkey \
MODSIGN: Automatically generate module signing keys if missing Automatically generate keys for module signing if they're absent so that allyesconfig doesn't break. The builder should consider generating their own key and certificate, however, so that the keys are appropriately named. The private key for the module signer should be placed in signing_key.priv (unencrypted!) and the public key in an X.509 certificate as signing_key.x509. If a transient key is desired for signing the modules, a config file for 'openssl req' can be placed in x509.genkey, looking something like the following: [ req ] default_bits = 4096 distinguished_name = req_distinguished_name prompt = no x509_extensions = myexts [ req_distinguished_name ] O = Magarathea CN = Glacier signing key emailAddress = slartibartfast@magrathea.h2g2 [ myexts ] basicConstraints=critical,CA:FALSE keyUsage=digitalSignature subjectKeyIdentifier=hash authorityKeyIdentifier=hash The build process will use this to configure: openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \ -x509 -config x509.genkey \ -outform DER -out signing_key.x509 \ -keyout signing_key.priv to generate the key. Note that it is required that the X.509 certificate have a subjectKeyIdentifier and an authorityKeyIdentifier. Without those, the certificate will be rejected. These can be used to check the validity of a certificate. Note that 'make distclean' will remove signing_key.{priv,x509} and x509.genkey, whether or not they were generated automatically. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-26 16:09:51 +07:00
-outform DER -out signing_key.x509 \
-keyout signing_key.priv 2>&1
MODSIGN: Automatically generate module signing keys if missing Automatically generate keys for module signing if they're absent so that allyesconfig doesn't break. The builder should consider generating their own key and certificate, however, so that the keys are appropriately named. The private key for the module signer should be placed in signing_key.priv (unencrypted!) and the public key in an X.509 certificate as signing_key.x509. If a transient key is desired for signing the modules, a config file for 'openssl req' can be placed in x509.genkey, looking something like the following: [ req ] default_bits = 4096 distinguished_name = req_distinguished_name prompt = no x509_extensions = myexts [ req_distinguished_name ] O = Magarathea CN = Glacier signing key emailAddress = slartibartfast@magrathea.h2g2 [ myexts ] basicConstraints=critical,CA:FALSE keyUsage=digitalSignature subjectKeyIdentifier=hash authorityKeyIdentifier=hash The build process will use this to configure: openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \ -x509 -config x509.genkey \ -outform DER -out signing_key.x509 \ -keyout signing_key.priv to generate the key. Note that it is required that the X.509 certificate have a subjectKeyIdentifier and an authorityKeyIdentifier. Without those, the certificate will be rejected. These can be used to check the validity of a certificate. Note that 'make distclean' will remove signing_key.{priv,x509} and x509.genkey, whether or not they were generated automatically. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-26 16:09:51 +07:00
@echo "###"
@echo "### Key pair generated."
@echo "###"
x509.genkey:
@echo Generating X.509 key generation config
@echo >x509.genkey "[ req ]"
@echo >>x509.genkey "default_bits = 4096"
@echo >>x509.genkey "distinguished_name = req_distinguished_name"
@echo >>x509.genkey "prompt = no"
@echo >>x509.genkey "string_mask = utf8only"
MODSIGN: Automatically generate module signing keys if missing Automatically generate keys for module signing if they're absent so that allyesconfig doesn't break. The builder should consider generating their own key and certificate, however, so that the keys are appropriately named. The private key for the module signer should be placed in signing_key.priv (unencrypted!) and the public key in an X.509 certificate as signing_key.x509. If a transient key is desired for signing the modules, a config file for 'openssl req' can be placed in x509.genkey, looking something like the following: [ req ] default_bits = 4096 distinguished_name = req_distinguished_name prompt = no x509_extensions = myexts [ req_distinguished_name ] O = Magarathea CN = Glacier signing key emailAddress = slartibartfast@magrathea.h2g2 [ myexts ] basicConstraints=critical,CA:FALSE keyUsage=digitalSignature subjectKeyIdentifier=hash authorityKeyIdentifier=hash The build process will use this to configure: openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \ -x509 -config x509.genkey \ -outform DER -out signing_key.x509 \ -keyout signing_key.priv to generate the key. Note that it is required that the X.509 certificate have a subjectKeyIdentifier and an authorityKeyIdentifier. Without those, the certificate will be rejected. These can be used to check the validity of a certificate. Note that 'make distclean' will remove signing_key.{priv,x509} and x509.genkey, whether or not they were generated automatically. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-26 16:09:51 +07:00
@echo >>x509.genkey "x509_extensions = myexts"
@echo >>x509.genkey
@echo >>x509.genkey "[ req_distinguished_name ]"
@echo >>x509.genkey "#O = Unspecified company"
@echo >>x509.genkey "CN = Build time autogenerated kernel key"
@echo >>x509.genkey "#emailAddress = unspecified.user@unspecified.company"
MODSIGN: Automatically generate module signing keys if missing Automatically generate keys for module signing if they're absent so that allyesconfig doesn't break. The builder should consider generating their own key and certificate, however, so that the keys are appropriately named. The private key for the module signer should be placed in signing_key.priv (unencrypted!) and the public key in an X.509 certificate as signing_key.x509. If a transient key is desired for signing the modules, a config file for 'openssl req' can be placed in x509.genkey, looking something like the following: [ req ] default_bits = 4096 distinguished_name = req_distinguished_name prompt = no x509_extensions = myexts [ req_distinguished_name ] O = Magarathea CN = Glacier signing key emailAddress = slartibartfast@magrathea.h2g2 [ myexts ] basicConstraints=critical,CA:FALSE keyUsage=digitalSignature subjectKeyIdentifier=hash authorityKeyIdentifier=hash The build process will use this to configure: openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \ -x509 -config x509.genkey \ -outform DER -out signing_key.x509 \ -keyout signing_key.priv to generate the key. Note that it is required that the X.509 certificate have a subjectKeyIdentifier and an authorityKeyIdentifier. Without those, the certificate will be rejected. These can be used to check the validity of a certificate. Note that 'make distclean' will remove signing_key.{priv,x509} and x509.genkey, whether or not they were generated automatically. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-26 16:09:51 +07:00
@echo >>x509.genkey
@echo >>x509.genkey "[ myexts ]"
@echo >>x509.genkey "basicConstraints=critical,CA:FALSE"
@echo >>x509.genkey "keyUsage=digitalSignature"
@echo >>x509.genkey "subjectKeyIdentifier=hash"
@echo >>x509.genkey "authorityKeyIdentifier=keyid"
endif