AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
143e1e28cb
linux_dsm_epyc7002/arch/s390/include/asm/mmu_context.h

133 lines
3.4 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*
* S390 version
*
* Derived from "include/asm-i386/mmu_context.h"
*/
#ifndef __S390_MMU_CONTEXT_H
#define __S390_MMU_CONTEXT_H
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-06 03:18:17 +07:00
#include <asm/pgalloc.h>
[S390] 1K/2K page table pages. This patch implements 1K/2K page table pages for s390. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-10 00:24:35 +07:00
#include <asm/uaccess.h>
[S390] fix tlb flushing vs. concurrent /proc accesses The tlb flushing code uses the mm_users field of the mm_struct to decide if each page table entry needs to be flushed individually with IPTE or if a global flush for the mm_struct is sufficient after all page table updates have been done. The comment for mm_users says "How many users with user space?" but the /proc code increases mm_users after it found the process structure by pid without creating a new user process. Which makes mm_users useless for the decision between the two tlb flusing methods. The current code can be confused to not flush tlb entries by a concurrent access to /proc files if e.g. a fork is in progres. The solution for this problem is to make the tlb flushing logic independent from the mm_users field. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-24 14:26:21 +07:00
#include <asm/tlbflush.h>
Disintegrate asm/system.h for S390 Disintegrate asm/system.h for S390. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-s390@vger.kernel.org
2012-03-29 00:30:02 +07:00
#include <asm/ctl_reg.h>
[PATCH] x86: PARAVIRT: add hooks to intercept mm creation and destruction Add hooks to allow a paravirt implementation to track the lifetime of an mm. Paravirtualization requires three hooks, but only two are needed in common code. They are: arch_dup_mmap, which is called when a new mmap is created at fork arch_exit_mmap, which is called when the last process reference to an mm is dropped, which typically happens on exit and exec. The third hook is activate_mm, which is called from the arch-specific activate_mm() macro/function, and so doesn't need stub versions for other architectures. It's called when an mm is first used. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: linux-arch@vger.kernel.org Cc: James Bottomley <James.Bottomley@SteelEye.com> Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-03 00:27:14 +07:00
[S390] Fix tlb flushing with idte. The clear-by-asce operation of the idte instruction gets an asce (address-space-control-element) as argument to specify which TLBs need to get flushed. The current code passes a plain pointer to the start of the pgd without the additional bits which would make the pointer an asce. The current machines don't mind the difference but a future model might want to use the designation type control bits in the asce as a filter for the TLBs to flush. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:10:58 +07:00
static inline int init_new_context(struct task_struct *tsk,
struct mm_struct *mm)
{
s390/mm,tlb: optimize TLB flushing for zEC12 The zEC12 machines introduced the local-clearing control for the IDTE and IPTE instruction. If the control is set only the TLB of the local CPU is cleared of entries, either all entries of a single address space for IDTE, or the entry for a single page-table entry for IPTE. Without the local-clearing control the TLB flush is broadcasted to all CPUs in the configuration, which is expensive. The reset of the bit mask of the CPUs that need flushing after a non-local IDTE is tricky. As TLB entries for an address space remain in the TLB even if the address space is detached a new bit field is required to keep track of attached CPUs vs. CPUs in the need of a flush. After a non-local flush with IDTE the bit-field of attached CPUs is copied to the bit-field of CPUs in need of a flush. The ordering of operations on cpu_attach_mask, attach_count and mm_cpumask(mm) is such that an underindication in mm_cpumask(mm) is prevented but an overindication in mm_cpumask(mm) is possible. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03 18:55:01 +07:00
cpumask_clear(&mm->context.cpu_attach_mask);
[S390] fix tlb flushing vs. concurrent /proc accesses The tlb flushing code uses the mm_users field of the mm_struct to decide if each page table entry needs to be flushed individually with IPTE or if a global flush for the mm_struct is sufficient after all page table updates have been done. The comment for mm_users says "How many users with user space?" but the /proc code increases mm_users after it found the process structure by pid without creating a new user process. Which makes mm_users useless for the decision between the two tlb flusing methods. The current code can be confused to not flush tlb entries by a concurrent access to /proc files if e.g. a fork is in progres. The solution for this problem is to make the tlb flushing logic independent from the mm_users field. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-24 14:26:21 +07:00
atomic_set(&mm->context.attach_count, 0);
mm->context.flush_mm = 0;
[S390] 1K/2K page table pages. This patch implements 1K/2K page table pages for s390. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-10 00:24:35 +07:00
mm->context.asce_bits = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS;
[S390] Fix tlb flushing with idte. The clear-by-asce operation of the idte instruction gets an asce (address-space-control-element) as argument to specify which TLBs need to get flushed. The current code passes a plain pointer to the start of the pgd without the additional bits which would make the pointer an asce. The current machines don't mind the difference but a future model might want to use the designation type control bits in the asce as a filter for the TLBs to flush. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:10:58 +07:00
#ifdef CONFIG_64BIT
[S390] dynamic page tables. Add support for different number of page table levels dependent on the highest address used for a process. This will cause a 31 bit process to use a two level page table instead of the four level page table that is the default after the pud has been introduced. Likewise a normal 64 bit process will use three levels instead of four. Only if a process runs out of the 4 tera bytes which can be addressed with a three level page table the fourth level is dynamically added. Then the process can use up to 8 peta byte. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-10 00:24:37 +07:00
mm->context.asce_bits |= _ASCE_TYPE_REGION3;
[S390] Fix tlb flushing with idte. The clear-by-asce operation of the idte instruction gets an asce (address-space-control-element) as argument to specify which TLBs need to get flushed. The current code passes a plain pointer to the start of the pgd without the additional bits which would make the pointer an asce. The current machines don't mind the difference but a future model might want to use the designation type control bits in the asce as a filter for the TLBs to flush. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:10:58 +07:00
#endif
KVM: s390: allow sie enablement for multi-threaded programs Improve the code to upgrade the standard 2K page tables to 4K page tables with PGSTEs to allow the operation to happen when the program is already multi-threaded. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-26 20:04:02 +07:00
mm->context.has_pgste = 0;
[S390] dynamic page tables. Add support for different number of page table levels dependent on the highest address used for a process. This will cause a 31 bit process to use a two level page table instead of the four level page table that is the default after the pud has been introduced. Likewise a normal 64 bit process will use three levels instead of four. Only if a process runs out of the 4 tera bytes which can be addressed with a three level page table the fourth level is dynamically added. Then the process can use up to 8 peta byte. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-10 00:24:37 +07:00
mm->context.asce_limit = STACK_TOP_MAX;
crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
[S390] Fix tlb flushing with idte. The clear-by-asce operation of the idte instruction gets an asce (address-space-control-element) as argument to specify which TLBs need to get flushed. The current code passes a plain pointer to the start of the pgd without the additional bits which would make the pointer an asce. The current machines don't mind the difference but a future model might want to use the designation type control bits in the asce as a filter for the TLBs to flush. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:10:58 +07:00
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#define destroy_context(mm) do { } while (0)
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 16:42:25 +07:00
static inline void update_user_asce(struct mm_struct *mm, int load_primary)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
[S390] 1K/2K page table pages. This patch implements 1K/2K page table pages for s390. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-10 00:24:35 +07:00
pgd_t *pgd = mm->pgd;
S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd);
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 16:42:25 +07:00
if (load_primary)
__ctl_load(S390_lowcore.user_asce, 1, 1);
[S390] dynamic page tables. Add support for different number of page table levels dependent on the highest address used for a process. This will cause a 31 bit process to use a two level page table instead of the four level page table that is the default after the pud has been introduced. Likewise a normal 64 bit process will use three levels instead of four. Only if a process runs out of the 4 tera bytes which can be addressed with a three level page table the fourth level is dynamically added. Then the process can use up to 8 peta byte. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-10 00:24:37 +07:00
set_fs(current->thread.mm_segment);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 16:42:25 +07:00
static inline void clear_user_asce(struct mm_struct *mm, int load_primary)
s390/mm,tlb: safeguard against speculative TLB creation The principles of operations states that the CPU is allowed to create TLB entries for an address space anytime while an ASCE is loaded to the control register. This is true even if the CPU is running in the kernel and the user address space is not (actively) accessed. In theory this can affect two aspects of the TLB flush logic. For full-mm flushes the ASCE of the dying process is still attached. The approach to flush first with IDTE and then just free all page tables can in theory lead to stale TLB entries. Use the batched free of page tables for the full-mm flushes as well. For operations that can have a stale ASCE in the control register, e.g. a delayed update_user_asce in switch_mm, load the kernel ASCE to prevent invalid TLBs from being created. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03 18:54:59 +07:00
{
S390_lowcore.user_asce = S390_lowcore.kernel_asce;
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 16:42:25 +07:00
if (load_primary)
__ctl_load(S390_lowcore.user_asce, 1, 1);
__ctl_load(S390_lowcore.user_asce, 7, 7);
}
static inline void update_primary_asce(struct task_struct *tsk)
{
unsigned long asce;
__ctl_store(asce, 1, 1);
if (asce != S390_lowcore.kernel_asce)
__ctl_load(S390_lowcore.kernel_asce, 1, 1);
set_tsk_thread_flag(tsk, TIF_ASCE);
s390/mm,tlb: safeguard against speculative TLB creation The principles of operations states that the CPU is allowed to create TLB entries for an address space anytime while an ASCE is loaded to the control register. This is true even if the CPU is running in the kernel and the user address space is not (actively) accessed. In theory this can affect two aspects of the TLB flush logic. For full-mm flushes the ASCE of the dying process is still attached. The approach to flush first with IDTE and then just free all page tables can in theory lead to stale TLB entries. Use the batched free of page tables for the full-mm flushes as well. For operations that can have a stale ASCE in the control register, e.g. a delayed update_user_asce in switch_mm, load the kernel ASCE to prevent invalid TLBs from being created. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03 18:54:59 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-06 03:18:17 +07:00
struct task_struct *tsk)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 18:00:09 +07:00
int cpu = smp_processor_id();
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 16:42:25 +07:00
update_primary_asce(tsk);
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 18:00:09 +07:00
if (prev == next)
return;
s390/mm,tlb: optimize TLB flushing for zEC12 The zEC12 machines introduced the local-clearing control for the IDTE and IPTE instruction. If the control is set only the TLB of the local CPU is cleared of entries, either all entries of a single address space for IDTE, or the entry for a single page-table entry for IPTE. Without the local-clearing control the TLB flush is broadcasted to all CPUs in the configuration, which is expensive. The reset of the bit mask of the CPUs that need flushing after a non-local IDTE is tricky. As TLB entries for an address space remain in the TLB even if the address space is detached a new bit field is required to keep track of attached CPUs vs. CPUs in the need of a flush. After a non-local flush with IDTE the bit-field of attached CPUs is copied to the bit-field of CPUs in need of a flush. The ordering of operations on cpu_attach_mask, attach_count and mm_cpumask(mm) is such that an underindication in mm_cpumask(mm) is prevented but an overindication in mm_cpumask(mm) is possible. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03 18:55:01 +07:00
if (MACHINE_HAS_TLB_LC)
cpumask_set_cpu(cpu, &next->context.cpu_attach_mask);
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 18:00:09 +07:00
if (atomic_inc_return(&next->context.attach_count) >> 16) {
s390/mm,tlb: safeguard against speculative TLB creation The principles of operations states that the CPU is allowed to create TLB entries for an address space anytime while an ASCE is loaded to the control register. This is true even if the CPU is running in the kernel and the user address space is not (actively) accessed. In theory this can affect two aspects of the TLB flush logic. For full-mm flushes the ASCE of the dying process is still attached. The approach to flush first with IDTE and then just free all page tables can in theory lead to stale TLB entries. Use the batched free of page tables for the full-mm flushes as well. For operations that can have a stale ASCE in the control register, e.g. a delayed update_user_asce in switch_mm, load the kernel ASCE to prevent invalid TLBs from being created. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03 18:54:59 +07:00
/* Delay update_user_asce until all TLB flushes are done. */
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 18:00:09 +07:00
set_tsk_thread_flag(tsk, TIF_TLB_WAIT);
s390/mm,tlb: safeguard against speculative TLB creation The principles of operations states that the CPU is allowed to create TLB entries for an address space anytime while an ASCE is loaded to the control register. This is true even if the CPU is running in the kernel and the user address space is not (actively) accessed. In theory this can affect two aspects of the TLB flush logic. For full-mm flushes the ASCE of the dying process is still attached. The approach to flush first with IDTE and then just free all page tables can in theory lead to stale TLB entries. Use the batched free of page tables for the full-mm flushes as well. For operations that can have a stale ASCE in the control register, e.g. a delayed update_user_asce in switch_mm, load the kernel ASCE to prevent invalid TLBs from being created. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03 18:54:59 +07:00
/* Clear old ASCE by loading the kernel ASCE. */
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 16:42:25 +07:00
clear_user_asce(next, 0);
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 18:00:09 +07:00
} else {
cpumask_set_cpu(cpu, mm_cpumask(next));
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 16:42:25 +07:00
update_user_asce(next, 0);
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 18:00:09 +07:00
if (next->context.flush_mm)
/* Flush pending TLBs */
__tlb_flush_mm(next);
}
[S390] fix tlb flushing vs. concurrent /proc accesses The tlb flushing code uses the mm_users field of the mm_struct to decide if each page table entry needs to be flushed individually with IPTE or if a global flush for the mm_struct is sufficient after all page table updates have been done. The comment for mm_users says "How many users with user space?" but the /proc code increases mm_users after it found the process structure by pid without creating a new user process. Which makes mm_users useless for the decision between the two tlb flusing methods. The current code can be confused to not flush tlb entries by a concurrent access to /proc files if e.g. a fork is in progres. The solution for this problem is to make the tlb flushing logic independent from the mm_users field. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-24 14:26:21 +07:00
atomic_dec(&prev->context.attach_count);
WARN_ON(atomic_read(&prev->context.attach_count) < 0);
s390/mm,tlb: optimize TLB flushing for zEC12 The zEC12 machines introduced the local-clearing control for the IDTE and IPTE instruction. If the control is set only the TLB of the local CPU is cleared of entries, either all entries of a single address space for IDTE, or the entry for a single page-table entry for IPTE. Without the local-clearing control the TLB flush is broadcasted to all CPUs in the configuration, which is expensive. The reset of the bit mask of the CPUs that need flushing after a non-local IDTE is tricky. As TLB entries for an address space remain in the TLB even if the address space is detached a new bit field is required to keep track of attached CPUs vs. CPUs in the need of a flush. After a non-local flush with IDTE the bit-field of attached CPUs is copied to the bit-field of CPUs in need of a flush. The ordering of operations on cpu_attach_mask, attach_count and mm_cpumask(mm) is such that an underindication in mm_cpumask(mm) is prevented but an overindication in mm_cpumask(mm) is possible. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03 18:55:01 +07:00
if (MACHINE_HAS_TLB_LC)
cpumask_clear_cpu(cpu, &prev->context.cpu_attach_mask);
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 18:00:09 +07:00
}
#define finish_arch_post_lock_switch finish_arch_post_lock_switch
static inline void finish_arch_post_lock_switch(void)
{
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
if (!test_tsk_thread_flag(tsk, TIF_TLB_WAIT))
return;
preempt_disable();
clear_tsk_thread_flag(tsk, TIF_TLB_WAIT);
while (atomic_read(&mm->context.attach_count) >> 16)
cpu_relax();
cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 16:42:25 +07:00
update_user_asce(mm, 0);
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 18:00:09 +07:00
if (mm->context.flush_mm)
__tlb_flush_mm(mm);
preempt_enable();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
[S390] Cleanup page table definitions. - De-confuse the defines for the address-space-control-elements and the segment/region table entries. - Create out of line functions for page table allocation / freeing. - Simplify get_shadow_xxx functions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22 17:52:47 +07:00
#define enter_lazy_tlb(mm,tsk) do { } while (0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#define deactivate_mm(tsk,mm) do { } while (0)
[PATCH] s390: "extern inline" -> "static inline" "extern inline" -> "static inline" Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 12:34:42 +07:00
static inline void activate_mm(struct mm_struct *prev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
struct mm_struct *next)
{
switch_mm(prev, next, current);
}
s390/mm: downgrade page table after fork of a 31 bit process The downgrade of the 4 level page table created by init_new_context is currently done only in start_thread31. If a 31 bit process forks the new mm uses a 4 level page table, including the task size of 2<<42 that goes along with it. This is incorrect as now a 31 bit process can map memory beyond 2GB. Define arch_dup_mmap to do the downgrade after fork. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-26 13:53:06 +07:00
static inline void arch_dup_mmap(struct mm_struct *oldmm,
struct mm_struct *mm)
{
#ifdef CONFIG_64BIT
if (oldmm->context.asce_limit < mm->context.asce_limit)
crst_table_downgrade(mm, oldmm->context.asce_limit);
#endif
}
static inline void arch_exit_mmap(struct mm_struct *mm)
{
}
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-06 03:18:17 +07:00
#endif /* __S390_MMU_CONTEXT_H */
Reference in New Issue Copy Permalink