linux_dsm_epyc7002/tools/perf/util/symbol.c

2227 lines
50 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
// SPDX-License-Identifier: GPL-2.0
#include <dirent.h>
#include <errno.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <linux/kernel.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/param.h>
#include <fcntl.h>
#include <unistd.h>
#include <inttypes.h>
#include "annotate.h"
perf annotate: Use build-ids to find the right DSO We were still using the pathname found on the MMAP event, that could not be the one we used when recording, so use the build-id cache for that, only falling back to use the pathname in the MMAP event if no build-ids are available. With this we now also are able to do secure, seamless offline annotation. Example: [root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10 8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges 4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba 3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints [root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand [root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0 bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0 [root@doppio linux-2.6-tip]# Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20 22:15:33 +07:00
#include "build-id.h"
#include "util.h"
#include "debug.h"
#include "machine.h"
#include "symbol.h"
#include "strlist.h"
#include "intlist.h"
#include "namespaces.h"
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 13:40:45 +07:00
#include "header.h"
#include "path.h"
#include "sane_ctype.h"
#include <elf.h>
#include <limits.h>
#include <symbol/kallsyms.h>
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 13:29:58 +07:00
#include <sys/utsname.h>
static int dso__load_kernel_sym(struct dso *dso, struct map *map);
static int dso__load_guest_kernel_sym(struct dso *dso, struct map *map);
static bool symbol__is_idle(const char *name);
int vmlinux_path__nr_entries;
char **vmlinux_path;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 13:29:58 +07:00
struct symbol_conf symbol_conf = {
.use_modules = true,
.try_vmlinux_path = true,
.annotate_src = true,
.demangle = true,
.demangle_kernel = false,
.cumulate_callchain = true,
.show_hist_headers = true,
.symfs = "",
.event_group = true,
.inline_name = true,
};
static enum dso_binary_type binary_type_symtab[] = {
DSO_BINARY_TYPE__KALLSYMS,
DSO_BINARY_TYPE__GUEST_KALLSYMS,
DSO_BINARY_TYPE__JAVA_JIT,
DSO_BINARY_TYPE__DEBUGLINK,
DSO_BINARY_TYPE__BUILD_ID_CACHE,
DSO_BINARY_TYPE__BUILD_ID_CACHE_DEBUGINFO,
DSO_BINARY_TYPE__FEDORA_DEBUGINFO,
DSO_BINARY_TYPE__UBUNTU_DEBUGINFO,
DSO_BINARY_TYPE__BUILDID_DEBUGINFO,
DSO_BINARY_TYPE__SYSTEM_PATH_DSO,
DSO_BINARY_TYPE__GUEST_KMODULE,
DSO_BINARY_TYPE__GUEST_KMODULE_COMP,
DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE,
DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP,
DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO,
DSO_BINARY_TYPE__NOT_FOUND,
};
#define DSO_BINARY_TYPE__SYMTAB_CNT ARRAY_SIZE(binary_type_symtab)
bool symbol_type__is_a(char symbol_type, enum map_type map_type)
{
symbol_type = toupper(symbol_type);
switch (map_type) {
case MAP__FUNCTION:
return symbol_type == 'T' || symbol_type == 'W';
perf symbols: Add support for 'variable' symtabs Example: { u64 addr = strtoull(sym_filter, NULL, 16); struct map *map = map_groups__find(kmaps, MAP__VARIABLE, addr); if (map == NULL) pr_err("couldn't find map!\n"); else { struct symbol *sym = map__find_symbol(map, addr, NULL); if (sym == NULL) pr_err("couldn't find addr!\n"); else pr_info("addr %#Lx is in %s global var\n", addr, sym->name); } exit(0); } Added just after symbol__init() call in 'perf top', then: { u64 addr = strtoull(sym_filter, NULL, 16); struct map *map = map_groups__find(kmaps, MAP__VARIABLE, addr); if (map == NULL) pr_err("couldn't find map!\n"); else { struct symbol *sym = map__find_symbol(map, addr, NULL); if (sym == NULL) pr_err("couldn't find addr!\n"); else pr_info("addr %#Lx is in %s global var\n", addr, sym->name); } exit(0); } [root@doppio linux-2.6-tip]# grep ' [dD] ' /proc/kallsyms | grep ' sched' ffffffff817827d8 d sched_nr_latency ffffffff81782ce0 d sched_domains_mutex ffffffff8178c070 d schedstr.22423 ffffffff817909a0 d sched_register_mutex ffffffff81823490 d sched_feat_names ffffffff81823558 d scheduler_running ffffffff818235b8 d sched_clock_running ffffffff818235bc D sched_clock_stable ffffffff81824f00 d sched_switch_trace [root@doppio linux-2.6-tip]# perf top -s 0xffffffff817827d9 addr 0xffffffff817827d9 is in sched_nr_latency global var [root@doppio linux-2.6-tip]# perf top -s ffffffff81782ce0 addr 0xffffffff81782ce0 is in sched_domains_mutex global var [root@doppio linux-2.6-tip]# [root@doppio linux-2.6-tip]# perf top -s ffffffff81782ce0 --vmlinux OFF The file OFF cannot be used, trying to use /proc/kallsyms...addr 0xffffffff81782ce0 is in sched_domains_mutex global var [root@doppio linux-2.6-tip]# perf top -s ffffffff818235bc --vmlinux OFF The file OFF cannot be used, trying to use /proc/kallsyms...addr 0xffffffff818235bc is in sched_clock_stable global var [root@doppio linux-2.6-tip]# So it works with both /proc/kallsyms and with ELF symtabs, either the one on the vmlinux explicitely passed via --vmlinux or in one in the vmlinux_path that matches the buildid for the running kernel or the one found in the buildid header section in a perf.data file. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260550239-5372-4-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-11 23:50:39 +07:00
case MAP__VARIABLE:
return symbol_type == 'D';
default:
return false;
}
}
static int prefix_underscores_count(const char *str)
{
const char *tail = str;
while (*tail == '_')
tail++;
return tail - str;
}
const char * __weak arch__normalize_symbol_name(const char *name)
{
return name;
}
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 01:15:49 +07:00
int __weak arch__compare_symbol_names(const char *namea, const char *nameb)
{
return strcmp(namea, nameb);
}
int __weak arch__compare_symbol_names_n(const char *namea, const char *nameb,
unsigned int n)
{
return strncmp(namea, nameb, n);
}
int __weak arch__choose_best_symbol(struct symbol *syma,
struct symbol *symb __maybe_unused)
{
/* Avoid "SyS" kernel syscall aliases */
if (strlen(syma->name) >= 3 && !strncmp(syma->name, "SyS", 3))
return SYMBOL_B;
if (strlen(syma->name) >= 10 && !strncmp(syma->name, "compat_SyS", 10))
return SYMBOL_B;
return SYMBOL_A;
}
static int choose_best_symbol(struct symbol *syma, struct symbol *symb)
{
s64 a;
s64 b;
size_t na, nb;
/* Prefer a symbol with non zero length */
a = syma->end - syma->start;
b = symb->end - symb->start;
if ((b == 0) && (a > 0))
return SYMBOL_A;
else if ((a == 0) && (b > 0))
return SYMBOL_B;
/* Prefer a non weak symbol over a weak one */
a = syma->binding == STB_WEAK;
b = symb->binding == STB_WEAK;
if (b && !a)
return SYMBOL_A;
if (a && !b)
return SYMBOL_B;
/* Prefer a global symbol over a non global one */
a = syma->binding == STB_GLOBAL;
b = symb->binding == STB_GLOBAL;
if (a && !b)
return SYMBOL_A;
if (b && !a)
return SYMBOL_B;
/* Prefer a symbol with less underscores */
a = prefix_underscores_count(syma->name);
b = prefix_underscores_count(symb->name);
if (b > a)
return SYMBOL_A;
else if (a > b)
return SYMBOL_B;
/* Choose the symbol with the longest name */
na = strlen(syma->name);
nb = strlen(symb->name);
if (na > nb)
return SYMBOL_A;
else if (na < nb)
return SYMBOL_B;
return arch__choose_best_symbol(syma, symb);
}
void symbols__fixup_duplicate(struct rb_root *symbols)
{
struct rb_node *nd;
struct symbol *curr, *next;
if (symbol_conf.allow_aliases)
return;
nd = rb_first(symbols);
while (nd) {
curr = rb_entry(nd, struct symbol, rb_node);
again:
nd = rb_next(&curr->rb_node);
next = rb_entry(nd, struct symbol, rb_node);
if (!nd)
break;
if (curr->start != next->start)
continue;
if (choose_best_symbol(curr, next) == SYMBOL_A) {
rb_erase(&next->rb_node, symbols);
symbol__delete(next);
goto again;
} else {
nd = rb_next(&curr->rb_node);
rb_erase(&curr->rb_node, symbols);
symbol__delete(curr);
}
}
}
void symbols__fixup_end(struct rb_root *symbols)
{
struct rb_node *nd, *prevnd = rb_first(symbols);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
struct symbol *curr, *prev;
if (prevnd == NULL)
return;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
curr = rb_entry(prevnd, struct symbol, rb_node);
for (nd = rb_next(prevnd); nd; nd = rb_next(nd)) {
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
prev = curr;
curr = rb_entry(nd, struct symbol, rb_node);
if (prev->end == prev->start && prev->end != curr->start)
prev->end = curr->start;
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
/* Last entry */
if (curr->end == curr->start)
perf symbols: Fix symbols__fixup_end heuristic for corner cases The current symbols__fixup_end() heuristic for the last entry in the rb tree is suboptimal as it leads to not being able to recognize the symbol in the call graph in a couple of corner cases, for example: i) If the symbol has a start address (f.e. exposed via kallsyms) that is at a page boundary, then the roundup(curr->start, 4096) for the last entry will result in curr->start == curr->end with a symbol length of zero. ii) If the symbol has a start address that is shortly before a page boundary, then also here, curr->end - curr->start will just be very few bytes, where it's unrealistic that we could perform a match against. Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so that we can catch such corner cases and have a better chance to find that specific symbol. It's still just best effort as the real end of the symbol is unknown to us (and could even be at a larger offset than the current range), but better than the current situation. Alexei reported that he recently run into case i) with a JITed eBPF program (these are all page aligned) as the last symbol which wasn't properly shown in the call graph (while other eBPF program symbols in the rb tree were displayed correctly). Since this is a generic issue, lets try to improve the heuristic a bit. Reported-and-Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup") Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-16 04:53:37 +07:00
curr->end = roundup(curr->start, 4096) + 4096;
}
void __map_groups__fixup_end(struct map_groups *mg, enum map_type type)
{
struct maps *maps = &mg->maps[type];
struct map *next, *curr;
down_write(&maps->lock);
curr = maps__first(maps);
if (curr == NULL)
goto out_unlock;
for (next = map__next(curr); next; next = map__next(curr)) {
perf record: Fix wrong size in perf_record_mmap for last kernel module During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 20:49:02 +07:00
if (!curr->end)
curr->end = next->start;
curr = next;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
}
/*
* We still haven't the actual symbols, so guess the
* last map final address.
*/
perf record: Fix wrong size in perf_record_mmap for last kernel module During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 20:49:02 +07:00
if (!curr->end)
curr->end = ~0ULL;
out_unlock:
up_write(&maps->lock);
}
struct symbol *symbol__new(u64 start, u64 len, u8 binding, const char *name)
{
size_t namelen = strlen(name) + 1;
struct symbol *sym = calloc(1, (symbol_conf.priv_size +
sizeof(*sym) + namelen));
if (sym == NULL)
perf_counter tools: Add 'perf annotate' feature Add new perf sub-command to display annotated source code: $ perf annotate decode_tree_entry ------------------------------------------------ Percent | Source code & Disassembly of /home/mingo/git/git ------------------------------------------------ : : /home/mingo/git/git: file format elf64-x86-64 : : : Disassembly of section .text: : : 00000000004a0da0 <decode_tree_entry>: : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 3.82 : 4a0da0: 41 54 push %r12 : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.17 : 4a0da2: 48 83 fa 17 cmp $0x17,%rdx : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 0.00 : 4a0da6: 49 89 fc mov %rdi,%r12 0.00 : 4a0da9: 55 push %rbp 3.37 : 4a0daa: 53 push %rbx : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.08 : 4a0dab: 76 73 jbe 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dad: 80 7c 16 eb 00 cmpb $0x0,-0x15(%rsi,%rdx,1) 3.48 : 4a0db2: 75 6c jne 4a0e20 <decode_tree_entry+0x80> : static const char *get_mode(const char *str, unsigned int *modep) : { : unsigned char c; : unsigned int mode = 0; : : if (*str == ' ') 1.94 : 4a0db4: 0f b6 06 movzbl (%rsi),%eax 0.39 : 4a0db7: 3c 20 cmp $0x20,%al 0.00 : 4a0db9: 74 65 je 4a0e20 <decode_tree_entry+0x80> : return NULL; : : while ((c = *str++) != ' ') { 0.06 : 4a0dbb: 89 c2 mov %eax,%edx : if (c < '0' || c > '7') 1.99 : 4a0dbd: 31 ed xor %ebp,%ebp : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 1.74 : 4a0dbf: 48 8d 5e 01 lea 0x1(%rsi),%rbx : if (c < '0' || c > '7') 0.00 : 4a0dc3: 8d 42 d0 lea -0x30(%rdx),%eax 0.17 : 4a0dc6: 3c 07 cmp $0x7,%al 0.00 : 4a0dc8: 76 0d jbe 4a0dd7 <decode_tree_entry+0x37> 0.00 : 4a0dca: eb 54 jmp 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dcc: 0f 1f 40 00 nopl 0x0(%rax) 16.57 : 4a0dd0: 8d 42 d0 lea -0x30(%rdx),%eax 0.14 : 4a0dd3: 3c 07 cmp $0x7,%al 0.00 : 4a0dd5: 77 49 ja 4a0e20 <decode_tree_entry+0x80> : return NULL; : mode = (mode << 3) + (c - '0'); 3.12 : 4a0dd7: 0f b6 c2 movzbl %dl,%eax : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 0.00 : 4a0dda: 0f b6 13 movzbl (%rbx),%edx 16.74 : 4a0ddd: 48 83 c3 01 add $0x1,%rbx : if (c < '0' || c > '7') : return NULL; : mode = (mode << 3) + (c - '0'); The first column is the percentage of samples that arrived on that particular line - relative to the total cost of the function. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 20:48:52 +07:00
return NULL;
if (symbol_conf.priv_size) {
if (symbol_conf.init_annotation) {
struct annotation *notes = (void *)sym;
pthread_mutex_init(&notes->lock, NULL);
}
sym = ((void *)sym) + symbol_conf.priv_size;
}
sym->start = start;
sym->end = len ? start + len : start;
sym->binding = binding;
sym->namelen = namelen - 1;
pr_debug4("%s: %s %#" PRIx64 "-%#" PRIx64 "\n",
__func__, name, start, sym->end);
memcpy(sym->name, name, namelen);
return sym;
}
void symbol__delete(struct symbol *sym)
{
free(((void *)sym) - symbol_conf.priv_size);
}
void symbols__delete(struct rb_root *symbols)
{
struct symbol *pos;
struct rb_node *next = rb_first(symbols);
while (next) {
pos = rb_entry(next, struct symbol, rb_node);
next = rb_next(&pos->rb_node);
rb_erase(&pos->rb_node, symbols);
symbol__delete(pos);
}
}
void __symbols__insert(struct rb_root *symbols, struct symbol *sym, bool kernel)
{
struct rb_node **p = &symbols->rb_node;
struct rb_node *parent = NULL;
const u64 ip = sym->start;
struct symbol *s;
if (kernel) {
const char *name = sym->name;
/*
* ppc64 uses function descriptors and appends a '.' to the
* start of every instruction address. Remove it.
*/
if (name[0] == '.')
name++;
sym->idle = symbol__is_idle(name);
}
while (*p != NULL) {
parent = *p;
s = rb_entry(parent, struct symbol, rb_node);
if (ip < s->start)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
}
rb_link_node(&sym->rb_node, parent, p);
rb_insert_color(&sym->rb_node, symbols);
}
void symbols__insert(struct rb_root *symbols, struct symbol *sym)
{
__symbols__insert(symbols, sym, false);
}
static struct symbol *symbols__find(struct rb_root *symbols, u64 ip)
{
struct rb_node *n;
if (symbols == NULL)
return NULL;
n = symbols->rb_node;
while (n) {
struct symbol *s = rb_entry(n, struct symbol, rb_node);
if (ip < s->start)
n = n->rb_left;
perf symbols: Fix handling of zero-length symbols. This change introduces a fix to symbols__find, so that it is able to find symbols of length zero (where start == end). The current code has the following problem: - The current implementation of symbols__find is unable to find any symbols of length zero. - The db-export framework explicitly creates zero length symbols at locations where no symbol currently exists. The combination of the two above behaviors results in behavior similar to the example below. 1. addr_location is created for a sample, but symbol is unable to be resolved. 2. db export creates an "unknown" symbol of length zero at that address and inserts it into the dso. 3. A new sample comes in at the same address, but symbol__find is unable to find the zero length symbol, so it is still unresolved. 4. db export sees the symbol is unresolved, and allocated a duplicate symbol, even though it already did this in step 2. This behavior continues every time an address without symbol information is seen, which causes a very large number of these symbols to be allocated. The effect of this fix can be observed by looking at the contents of an exported database before/after the fix (generated with scripts/python/export-to-postgresql.py) Ex. BEFORE THE CHANGE: example_db=# select count(*) from symbols; count -------- 900213 (1 row) example_db=# select count(*) from symbols where symbols.name='unknown'; count -------- 897355 (1 row) example_db=# select count(*) from symbols where symbols.name!='unknown'; count ------- 2858 (1 row) AFTER THE CHANGE: example_db=# select count(*) from symbols; count ------- 25217 (1 row) example_db=# select count(*) from symbols where name='unknown'; count ------- 22359 (1 row) example_db=# select count(*) from symbols where name!='unknown'; count ------- 2858 (1 row) Signed-off-by: Chris Phlipot <cphlipot0@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1462612620-25008-1-git-send-email-cphlipot0@gmail.com [ Moved the test to later in the rb_tree tests, as this not the likely case ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-07 16:16:59 +07:00
else if (ip > s->end || (ip == s->end && ip != s->start))
n = n->rb_right;
else
return s;
}
return NULL;
}
static struct symbol *symbols__first(struct rb_root *symbols)
{
struct rb_node *n = rb_first(symbols);
if (n)
return rb_entry(n, struct symbol, rb_node);
return NULL;
}
static struct symbol *symbols__last(struct rb_root *symbols)
{
struct rb_node *n = rb_last(symbols);
if (n)
return rb_entry(n, struct symbol, rb_node);
return NULL;
}
static struct symbol *symbols__next(struct symbol *sym)
{
struct rb_node *n = rb_next(&sym->rb_node);
if (n)
return rb_entry(n, struct symbol, rb_node);
return NULL;
}
static void symbols__insert_by_name(struct rb_root *symbols, struct symbol *sym)
{
struct rb_node **p = &symbols->rb_node;
struct rb_node *parent = NULL;
struct symbol_name_rb_node *symn, *s;
symn = container_of(sym, struct symbol_name_rb_node, sym);
while (*p != NULL) {
parent = *p;
s = rb_entry(parent, struct symbol_name_rb_node, rb_node);
if (strcmp(sym->name, s->sym.name) < 0)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
}
rb_link_node(&symn->rb_node, parent, p);
rb_insert_color(&symn->rb_node, symbols);
}
static void symbols__sort_by_name(struct rb_root *symbols,
struct rb_root *source)
{
struct rb_node *nd;
for (nd = rb_first(source); nd; nd = rb_next(nd)) {
struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
symbols__insert_by_name(symbols, pos);
}
}
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 01:15:49 +07:00
int symbol__match_symbol_name(const char *name, const char *str,
enum symbol_tag_include includes)
{
const char *versioning;
if (includes == SYMBOL_TAG_INCLUDE__DEFAULT_ONLY &&
(versioning = strstr(name, "@@"))) {
int len = strlen(str);
if (len < versioning - name)
len = versioning - name;
return arch__compare_symbol_names_n(name, str, len);
} else
return arch__compare_symbol_names(name, str);
}
static struct symbol *symbols__find_by_name(struct rb_root *symbols,
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 01:15:49 +07:00
const char *name,
enum symbol_tag_include includes)
{
struct rb_node *n;
struct symbol_name_rb_node *s = NULL;
if (symbols == NULL)
return NULL;
n = symbols->rb_node;
while (n) {
int cmp;
s = rb_entry(n, struct symbol_name_rb_node, rb_node);
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 01:15:49 +07:00
cmp = symbol__match_symbol_name(s->sym.name, name, includes);
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 01:15:49 +07:00
if (cmp > 0)
n = n->rb_left;
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 01:15:49 +07:00
else if (cmp < 0)
n = n->rb_right;
else
break;
}
if (n == NULL)
return NULL;
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 01:15:49 +07:00
if (includes != SYMBOL_TAG_INCLUDE__DEFAULT_ONLY)
/* return first symbol that has same name (if any) */
for (n = rb_prev(n); n; n = rb_prev(n)) {
struct symbol_name_rb_node *tmp;
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 01:15:49 +07:00
tmp = rb_entry(n, struct symbol_name_rb_node, rb_node);
if (arch__compare_symbol_names(tmp->sym.name, s->sym.name))
break;
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 01:15:49 +07:00
s = tmp;
}
return &s->sym;
}
void dso__reset_find_symbol_cache(struct dso *dso)
{
enum map_type type;
for (type = MAP__FUNCTION; type <= MAP__VARIABLE; ++type) {
dso->last_find_result[type].addr = 0;
dso->last_find_result[type].symbol = NULL;
}
}
void dso__insert_symbol(struct dso *dso, enum map_type type, struct symbol *sym)
{
__symbols__insert(&dso->symbols[type], sym, dso->kernel);
/* update the symbol cache if necessary */
if (dso->last_find_result[type].addr >= sym->start &&
(dso->last_find_result[type].addr < sym->end ||
sym->start == sym->end)) {
dso->last_find_result[type].symbol = sym;
}
}
struct symbol *dso__find_symbol(struct dso *dso,
enum map_type type, u64 addr)
{
perf symbols: Accept symbols starting at address 0 That is the case of _text on s390, and we have some functions that return an address, using address zero to report problems, oops. This would lead the symbol loading routines to not use "_text" as the reference relocation symbol, or the first symbol for the kernel, but use instead "_stext", that is at the same address on x86_64 and others, but not on s390: [acme@localhost perf-4.11.0-rc6]$ head -15 /proc/kallsyms 0000000000000000 T _text 0000000000000418 t iplstart 0000000000000800 T start 000000000000080a t .base 000000000000082e t .sk8x8 0000000000000834 t .gotr 0000000000000842 t .cmd 0000000000000846 t .parm 000000000000084a t .lowcase 0000000000010000 T startup 0000000000010010 T startup_kdump 0000000000010214 t startup_kdump_relocated 0000000000011000 T startup_continue 00000000000112a0 T _ehead 0000000000100000 T _stext [acme@localhost perf-4.11.0-rc6]$ Which in turn would make 'perf test vmlinux' to fail because it wouldn't find the symbols before "_stext" in kallsyms. Fix it by using the return value only for errors and storing the address, when the symbol is successfully found, in a provided pointer arg. Before this patch: After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 40693 Looking at the vmlinux_path (8 entries long) Using /usr/lib/debug/lib/modules/3.10.0-654.el7.s390x/vmlinux for symbols ERR : 0: _text not on kallsyms ERR : 0x418: iplstart not on kallsyms ERR : 0x800: start not on kallsyms ERR : 0x80a: .base not on kallsyms ERR : 0x82e: .sk8x8 not on kallsyms ERR : 0x834: .gotr not on kallsyms ERR : 0x842: .cmd not on kallsyms ERR : 0x846: .parm not on kallsyms ERR : 0x84a: .lowcase not on kallsyms ERR : 0x10000: startup not on kallsyms ERR : 0x10010: startup_kdump not on kallsyms ERR : 0x10214: startup_kdump_relocated not on kallsyms ERR : 0x11000: startup_continue not on kallsyms ERR : 0x112a0: _ehead not on kallsyms <SNIP warnings> test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@localhost perf-4.11.0-rc6]$ After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 47160 <SNIP warnings> test child finished with 0 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@localhost perf-4.11.0-rc6]$ Reported-by: Michael Petlan <mpetlan@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9x9bwgd3btwdk1u51xie93fz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-28 07:21:09 +07:00
if (dso->last_find_result[type].addr != addr || dso->last_find_result[type].symbol == NULL) {
dso->last_find_result[type].addr = addr;
dso->last_find_result[type].symbol = symbols__find(&dso->symbols[type], addr);
}
return dso->last_find_result[type].symbol;
}
struct symbol *dso__first_symbol(struct dso *dso, enum map_type type)
{
return symbols__first(&dso->symbols[type]);
}
struct symbol *dso__last_symbol(struct dso *dso, enum map_type type)
{
return symbols__last(&dso->symbols[type]);
}
struct symbol *dso__next_symbol(struct symbol *sym)
{
return symbols__next(sym);
}
struct symbol *symbol__next_by_name(struct symbol *sym)
{
struct symbol_name_rb_node *s = container_of(sym, struct symbol_name_rb_node, sym);
struct rb_node *n = rb_next(&s->rb_node);
return n ? &rb_entry(n, struct symbol_name_rb_node, rb_node)->sym : NULL;
}
/*
* Teturns first symbol that matched with @name.
*/
struct symbol *dso__find_symbol_by_name(struct dso *dso, enum map_type type,
const char *name)
{
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 01:15:49 +07:00
struct symbol *s = symbols__find_by_name(&dso->symbol_names[type], name,
SYMBOL_TAG_INCLUDE__NONE);
if (!s)
s = symbols__find_by_name(&dso->symbol_names[type], name,
SYMBOL_TAG_INCLUDE__DEFAULT_ONLY);
return s;
}
void dso__sort_by_name(struct dso *dso, enum map_type type)
{
dso__set_sorted_by_name(dso, type);
return symbols__sort_by_name(&dso->symbol_names[type],
&dso->symbols[type]);
}
int modules__parse(const char *filename, void *arg,
int (*process_module)(void *arg, const char *name,
perf record: Fix wrong size in perf_record_mmap for last kernel module During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 20:49:02 +07:00
u64 start, u64 size))
{
char *line = NULL;
size_t n;
FILE *file;
int err = 0;
file = fopen(filename, "r");
if (file == NULL)
return -1;
while (1) {
char name[PATH_MAX];
perf record: Fix wrong size in perf_record_mmap for last kernel module During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 20:49:02 +07:00
u64 start, size;
char *sep, *endptr;
ssize_t line_len;
line_len = getline(&line, &n, file);
if (line_len < 0) {
if (feof(file))
break;
err = -1;
goto out;
}
if (!line) {
err = -1;
goto out;
}
line[--line_len] = '\0'; /* \n */
sep = strrchr(line, 'x');
if (sep == NULL)
continue;
hex2u64(sep + 1, &start);
sep = strchr(line, ' ');
if (sep == NULL)
continue;
*sep = '\0';
scnprintf(name, sizeof(name), "[%s]", line);
perf record: Fix wrong size in perf_record_mmap for last kernel module During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 20:49:02 +07:00
size = strtoul(sep + 1, &endptr, 0);
if (*endptr != ' ' && *endptr != '\t')
continue;
err = process_module(arg, name, start, size);
if (err)
break;
}
out:
free(line);
fclose(file);
return err;
}
struct process_kallsyms_args {
struct map *map;
struct dso *dso;
};
/*
* These are symbols in the kernel image, so make sure that
* sym is from a kernel DSO.
*/
static bool symbol__is_idle(const char *name)
{
const char * const idle_symbols[] = {
"cpu_idle",
"cpu_startup_entry",
"intel_idle",
"default_idle",
"native_safe_halt",
"enter_idle",
"exit_idle",
"mwait_idle",
"mwait_idle_with_hints",
"poll_idle",
"ppc64_runlatch_off",
"pseries_dedicated_idle_sleep",
NULL
};
int i;
for (i = 0; idle_symbols[i]; i++) {
if (!strcmp(idle_symbols[i], name))
return true;
}
return false;
}
static int map__process_kallsym_symbol(void *arg, const char *name,
char type, u64 start)
{
struct symbol *sym;
struct process_kallsyms_args *a = arg;
struct rb_root *root = &a->dso->symbols[a->map->type];
if (!symbol_type__is_a(type, a->map->type))
return 0;
/*
* module symbols are not sorted so we add all
* symbols, setting length to 0, and rely on
* symbols__fixup_end() to fix it up.
*/
sym = symbol__new(start, 0, kallsyms2elf_binding(type), name);
if (sym == NULL)
return -ENOMEM;
/*
* We will pass the symbols to the filter later, in
* map__split_kallsyms, when we have split the maps per module
*/
__symbols__insert(root, sym, !strchr(name, '['));
return 0;
}
/*
* Loads the function entries in /proc/kallsyms into kernel_map->dso,
* so that we can in the next step set the symbol ->end address and then
* call kernel_maps__split_kallsyms.
*/
static int dso__load_all_kallsyms(struct dso *dso, const char *filename,
struct map *map)
{
struct process_kallsyms_args args = { .map = map, .dso = dso, };
return kallsyms__parse(filename, &args, map__process_kallsym_symbol);
}
static int dso__split_kallsyms_for_kcore(struct dso *dso, struct map *map)
{
struct map_groups *kmaps = map__kmaps(map);
struct map *curr_map;
struct symbol *pos;
int count = 0;
struct rb_root old_root = dso->symbols[map->type];
struct rb_root *root = &dso->symbols[map->type];
struct rb_node *next = rb_first(root);
if (!kmaps)
return -1;
*root = RB_ROOT;
while (next) {
char *module;
pos = rb_entry(next, struct symbol, rb_node);
next = rb_next(&pos->rb_node);
rb_erase_init(&pos->rb_node, &old_root);
module = strchr(pos->name, '\t');
if (module)
*module = '\0';
curr_map = map_groups__find(kmaps, map->type, pos->start);
if (!curr_map) {
symbol__delete(pos);
continue;
}
pos->start -= curr_map->start - curr_map->pgoff;
if (pos->end)
pos->end -= curr_map->start - curr_map->pgoff;
symbols__insert(&curr_map->dso->symbols[curr_map->type], pos);
++count;
}
/* Symbols have been adjusted */
dso->adjust_symbols = 1;
return count;
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
/*
* Split the symbols into maps, making sure there are no overlaps, i.e. the
* kernel range is broken in several maps, named [kernel].N, as we don't have
* the original ELF section names vmlinux have.
*/
static int dso__split_kallsyms(struct dso *dso, struct map *map, u64 delta)
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
{
struct map_groups *kmaps = map__kmaps(map);
struct machine *machine;
struct map *curr_map = map;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
struct symbol *pos;
int count = 0, moved = 0;
struct rb_root *root = &dso->symbols[map->type];
struct rb_node *next = rb_first(root);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
int kernel_range = 0;
if (!kmaps)
return -1;
machine = kmaps->machine;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
while (next) {
char *module;
pos = rb_entry(next, struct symbol, rb_node);
next = rb_next(&pos->rb_node);
module = strchr(pos->name, '\t');
if (module) {
if (!symbol_conf.use_modules)
goto discard_symbol;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
*module++ = '\0';
if (strcmp(curr_map->dso->short_name, module)) {
if (curr_map != map &&
dso->kernel == DSO_TYPE_GUEST_KERNEL &&
machine__is_default_guest(machine)) {
/*
* We assume all symbols of a module are
* continuous in * kallsyms, so curr_map
* points to a module and all its
* symbols are in its kmap. Mark it as
* loaded.
*/
dso__set_loaded(curr_map->dso,
curr_map->type);
}
curr_map = map_groups__find_by_name(kmaps,
map->type, module);
if (curr_map == NULL) {
pr_debug("%s/proc/{kallsyms,modules} "
"inconsistency while looking "
"for \"%s\" module!\n",
machine->root_dir, module);
curr_map = map;
goto discard_symbol;
}
if (curr_map->dso->loaded &&
!machine__is_default_guest(machine))
goto discard_symbol;
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
/*
* So that we look just like we get from .ko files,
* i.e. not prelinked, relative to map->start.
*/
pos->start = curr_map->map_ip(curr_map, pos->start);
pos->end = curr_map->map_ip(curr_map, pos->end);
} else if (curr_map != map) {
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
char dso_name[PATH_MAX];
struct dso *ndso;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
if (delta) {
/* Kernel was relocated at boot time */
pos->start -= delta;
pos->end -= delta;
}
if (count == 0) {
curr_map = map;
goto add_symbol;
}
if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
snprintf(dso_name, sizeof(dso_name),
"[guest.kernel].%d",
kernel_range++);
else
snprintf(dso_name, sizeof(dso_name),
"[kernel].%d",
kernel_range++);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
ndso = dso__new(dso_name);
if (ndso == NULL)
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
return -1;
ndso->kernel = dso->kernel;
curr_map = map__new2(pos->start, ndso, map->type);
if (curr_map == NULL) {
dso__put(ndso);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
return -1;
}
curr_map->map_ip = curr_map->unmap_ip = identity__map_ip;
map_groups__insert(kmaps, curr_map);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
++kernel_range;
} else if (delta) {
/* Kernel was relocated at boot time */
pos->start -= delta;
pos->end -= delta;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
}
add_symbol:
if (curr_map != map) {
rb_erase(&pos->rb_node, root);
symbols__insert(&curr_map->dso->symbols[curr_map->type], pos);
++moved;
} else
++count;
continue;
discard_symbol:
rb_erase(&pos->rb_node, root);
symbol__delete(pos);
}
if (curr_map != map &&
dso->kernel == DSO_TYPE_GUEST_KERNEL &&
machine__is_default_guest(kmaps->machine)) {
dso__set_loaded(curr_map->dso, curr_map->type);
}
return count + moved;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
}
bool symbol__restricted_filename(const char *filename,
const char *restricted_filename)
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 19:53:51 +07:00
{
bool restricted = false;
if (symbol_conf.kptr_restrict) {
char *r = realpath(filename, NULL);
if (r != NULL) {
restricted = strcmp(r, restricted_filename) == 0;
free(r);
return restricted;
}
}
return restricted;
}
struct module_info {
struct rb_node rb_node;
char *name;
u64 start;
};
static void add_module(struct module_info *mi, struct rb_root *modules)
{
struct rb_node **p = &modules->rb_node;
struct rb_node *parent = NULL;
struct module_info *m;
while (*p != NULL) {
parent = *p;
m = rb_entry(parent, struct module_info, rb_node);
if (strcmp(mi->name, m->name) < 0)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
}
rb_link_node(&mi->rb_node, parent, p);
rb_insert_color(&mi->rb_node, modules);
}
static void delete_modules(struct rb_root *modules)
{
struct module_info *mi;
struct rb_node *next = rb_first(modules);
while (next) {
mi = rb_entry(next, struct module_info, rb_node);
next = rb_next(&mi->rb_node);
rb_erase(&mi->rb_node, modules);
zfree(&mi->name);
free(mi);
}
}
static struct module_info *find_module(const char *name,
struct rb_root *modules)
{
struct rb_node *n = modules->rb_node;
while (n) {
struct module_info *m;
int cmp;
m = rb_entry(n, struct module_info, rb_node);
cmp = strcmp(name, m->name);
if (cmp < 0)
n = n->rb_left;
else if (cmp > 0)
n = n->rb_right;
else
return m;
}
return NULL;
}
perf record: Fix wrong size in perf_record_mmap for last kernel module During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 20:49:02 +07:00
static int __read_proc_modules(void *arg, const char *name, u64 start,
u64 size __maybe_unused)
{
struct rb_root *modules = arg;
struct module_info *mi;
mi = zalloc(sizeof(struct module_info));
if (!mi)
return -ENOMEM;
mi->name = strdup(name);
mi->start = start;
if (!mi->name) {
free(mi);
return -ENOMEM;
}
add_module(mi, modules);
return 0;
}
static int read_proc_modules(const char *filename, struct rb_root *modules)
{
if (symbol__restricted_filename(filename, "/proc/modules"))
return -1;
if (modules__parse(filename, modules, __read_proc_modules)) {
delete_modules(modules);
return -1;
}
return 0;
}
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 20:57:29 +07:00
int compare_proc_modules(const char *from, const char *to)
{
struct rb_root from_modules = RB_ROOT;
struct rb_root to_modules = RB_ROOT;
struct rb_node *from_node, *to_node;
struct module_info *from_m, *to_m;
int ret = -1;
if (read_proc_modules(from, &from_modules))
return -1;
if (read_proc_modules(to, &to_modules))
goto out_delete_from;
from_node = rb_first(&from_modules);
to_node = rb_first(&to_modules);
while (from_node) {
if (!to_node)
break;
from_m = rb_entry(from_node, struct module_info, rb_node);
to_m = rb_entry(to_node, struct module_info, rb_node);
if (from_m->start != to_m->start ||
strcmp(from_m->name, to_m->name))
break;
from_node = rb_next(from_node);
to_node = rb_next(to_node);
}
if (!from_node && !to_node)
ret = 0;
delete_modules(&to_modules);
out_delete_from:
delete_modules(&from_modules);
return ret;
}
static int do_validate_kcore_modules(const char *filename, struct map *map,
struct map_groups *kmaps)
{
struct rb_root modules = RB_ROOT;
struct map *old_map;
int err;
err = read_proc_modules(filename, &modules);
if (err)
return err;
old_map = map_groups__first(kmaps, map->type);
while (old_map) {
struct map *next = map_groups__next(old_map);
struct module_info *mi;
if (old_map == map || old_map->start == map->start) {
/* The kernel map */
old_map = next;
continue;
}
/* Module must be in memory at the same address */
mi = find_module(old_map->dso->short_name, &modules);
if (!mi || mi->start != old_map->start) {
err = -EINVAL;
goto out;
}
old_map = next;
}
out:
delete_modules(&modules);
return err;
}
/*
* If kallsyms is referenced by name then we look for filename in the same
* directory.
*/
static bool filename_from_kallsyms_filename(char *filename,
const char *base_name,
const char *kallsyms_filename)
{
char *name;
strcpy(filename, kallsyms_filename);
name = strrchr(filename, '/');
if (!name)
return false;
name += 1;
if (!strcmp(name, "kallsyms")) {
strcpy(name, base_name);
return true;
}
return false;
}
static int validate_kcore_modules(const char *kallsyms_filename,
struct map *map)
{
struct map_groups *kmaps = map__kmaps(map);
char modules_filename[PATH_MAX];
if (!kmaps)
return -EINVAL;
if (!filename_from_kallsyms_filename(modules_filename, "modules",
kallsyms_filename))
return -EINVAL;
if (do_validate_kcore_modules(modules_filename, map, kmaps))
return -EINVAL;
return 0;
}
static int validate_kcore_addresses(const char *kallsyms_filename,
struct map *map)
{
struct kmap *kmap = map__kmap(map);
if (!kmap)
return -EINVAL;
if (kmap->ref_reloc_sym && kmap->ref_reloc_sym->name) {
u64 start;
perf symbols: Accept symbols starting at address 0 That is the case of _text on s390, and we have some functions that return an address, using address zero to report problems, oops. This would lead the symbol loading routines to not use "_text" as the reference relocation symbol, or the first symbol for the kernel, but use instead "_stext", that is at the same address on x86_64 and others, but not on s390: [acme@localhost perf-4.11.0-rc6]$ head -15 /proc/kallsyms 0000000000000000 T _text 0000000000000418 t iplstart 0000000000000800 T start 000000000000080a t .base 000000000000082e t .sk8x8 0000000000000834 t .gotr 0000000000000842 t .cmd 0000000000000846 t .parm 000000000000084a t .lowcase 0000000000010000 T startup 0000000000010010 T startup_kdump 0000000000010214 t startup_kdump_relocated 0000000000011000 T startup_continue 00000000000112a0 T _ehead 0000000000100000 T _stext [acme@localhost perf-4.11.0-rc6]$ Which in turn would make 'perf test vmlinux' to fail because it wouldn't find the symbols before "_stext" in kallsyms. Fix it by using the return value only for errors and storing the address, when the symbol is successfully found, in a provided pointer arg. Before this patch: After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 40693 Looking at the vmlinux_path (8 entries long) Using /usr/lib/debug/lib/modules/3.10.0-654.el7.s390x/vmlinux for symbols ERR : 0: _text not on kallsyms ERR : 0x418: iplstart not on kallsyms ERR : 0x800: start not on kallsyms ERR : 0x80a: .base not on kallsyms ERR : 0x82e: .sk8x8 not on kallsyms ERR : 0x834: .gotr not on kallsyms ERR : 0x842: .cmd not on kallsyms ERR : 0x846: .parm not on kallsyms ERR : 0x84a: .lowcase not on kallsyms ERR : 0x10000: startup not on kallsyms ERR : 0x10010: startup_kdump not on kallsyms ERR : 0x10214: startup_kdump_relocated not on kallsyms ERR : 0x11000: startup_continue not on kallsyms ERR : 0x112a0: _ehead not on kallsyms <SNIP warnings> test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@localhost perf-4.11.0-rc6]$ After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 47160 <SNIP warnings> test child finished with 0 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@localhost perf-4.11.0-rc6]$ Reported-by: Michael Petlan <mpetlan@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9x9bwgd3btwdk1u51xie93fz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-28 07:21:09 +07:00
if (kallsyms__get_function_start(kallsyms_filename,
kmap->ref_reloc_sym->name, &start))
return -ENOENT;
if (start != kmap->ref_reloc_sym->addr)
return -EINVAL;
}
return validate_kcore_modules(kallsyms_filename, map);
}
struct kcore_mapfn_data {
struct dso *dso;
enum map_type type;
struct list_head maps;
};
static int kcore_mapfn(u64 start, u64 len, u64 pgoff, void *data)
{
struct kcore_mapfn_data *md = data;
struct map *map;
map = map__new2(start, md->dso, md->type);
if (map == NULL)
return -ENOMEM;
map->end = map->start + len;
map->pgoff = pgoff;
list_add(&map->node, &md->maps);
return 0;
}
static int dso__load_kcore(struct dso *dso, struct map *map,
const char *kallsyms_filename)
{
struct map_groups *kmaps = map__kmaps(map);
struct machine *machine;
struct kcore_mapfn_data md;
struct map *old_map, *new_map, *replacement_map = NULL;
bool is_64_bit;
int err, fd;
char kcore_filename[PATH_MAX];
struct symbol *sym;
if (!kmaps)
return -EINVAL;
machine = kmaps->machine;
/* This function requires that the map is the kernel map */
if (map != machine->vmlinux_maps[map->type])
return -EINVAL;
if (!filename_from_kallsyms_filename(kcore_filename, "kcore",
kallsyms_filename))
return -EINVAL;
/* Modules and kernel must be present at their original addresses */
if (validate_kcore_addresses(kallsyms_filename, map))
return -EINVAL;
md.dso = dso;
md.type = map->type;
INIT_LIST_HEAD(&md.maps);
fd = open(kcore_filename, O_RDONLY);
if (fd < 0) {
pr_debug("Failed to open %s. Note /proc/kcore requires CAP_SYS_RAWIO capability to access.\n",
kcore_filename);
return -EINVAL;
}
/* Read new maps into temporary lists */
err = file__read_maps(fd, md.type == MAP__FUNCTION, kcore_mapfn, &md,
&is_64_bit);
if (err)
goto out_err;
dso->is_64_bit = is_64_bit;
if (list_empty(&md.maps)) {
err = -EINVAL;
goto out_err;
}
/* Remove old maps */
old_map = map_groups__first(kmaps, map->type);
while (old_map) {
struct map *next = map_groups__next(old_map);
if (old_map != map)
map_groups__remove(kmaps, old_map);
old_map = next;
}
/* Find the kernel map using the first symbol */
sym = dso__first_symbol(dso, map->type);
list_for_each_entry(new_map, &md.maps, node) {
if (sym && sym->start >= new_map->start &&
sym->start < new_map->end) {
replacement_map = new_map;
break;
}
}
if (!replacement_map)
replacement_map = list_entry(md.maps.next, struct map, node);
/* Add new maps */
while (!list_empty(&md.maps)) {
new_map = list_entry(md.maps.next, struct map, node);
list_del_init(&new_map->node);
if (new_map == replacement_map) {
map->start = new_map->start;
map->end = new_map->end;
map->pgoff = new_map->pgoff;
map->map_ip = new_map->map_ip;
map->unmap_ip = new_map->unmap_ip;
/* Ensure maps are correctly ordered */
map__get(map);
map_groups__remove(kmaps, map);
map_groups__insert(kmaps, map);
map__put(map);
} else {
map_groups__insert(kmaps, new_map);
}
map__put(new_map);
}
/*
* Set the data type and long name so that kcore can be read via
* dso__data_read_addr().
*/
if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
dso->binary_type = DSO_BINARY_TYPE__GUEST_KCORE;
else
dso->binary_type = DSO_BINARY_TYPE__KCORE;
dso__set_long_name(dso, strdup(kcore_filename), true);
close(fd);
if (map->type == MAP__FUNCTION)
pr_debug("Using %s for kernel object code\n", kcore_filename);
else
pr_debug("Using %s for kernel data\n", kcore_filename);
return 0;
out_err:
while (!list_empty(&md.maps)) {
map = list_entry(md.maps.next, struct map, node);
list_del_init(&map->node);
map__put(map);
}
close(fd);
return -EINVAL;
}
/*
* If the kernel is relocated at boot time, kallsyms won't match. Compute the
* delta based on the relocation reference symbol.
*/
static int kallsyms__delta(struct map *map, const char *filename, u64 *delta)
{
struct kmap *kmap = map__kmap(map);
u64 addr;
if (!kmap)
return -1;
if (!kmap->ref_reloc_sym || !kmap->ref_reloc_sym->name)
return 0;
perf symbols: Accept symbols starting at address 0 That is the case of _text on s390, and we have some functions that return an address, using address zero to report problems, oops. This would lead the symbol loading routines to not use "_text" as the reference relocation symbol, or the first symbol for the kernel, but use instead "_stext", that is at the same address on x86_64 and others, but not on s390: [acme@localhost perf-4.11.0-rc6]$ head -15 /proc/kallsyms 0000000000000000 T _text 0000000000000418 t iplstart 0000000000000800 T start 000000000000080a t .base 000000000000082e t .sk8x8 0000000000000834 t .gotr 0000000000000842 t .cmd 0000000000000846 t .parm 000000000000084a t .lowcase 0000000000010000 T startup 0000000000010010 T startup_kdump 0000000000010214 t startup_kdump_relocated 0000000000011000 T startup_continue 00000000000112a0 T _ehead 0000000000100000 T _stext [acme@localhost perf-4.11.0-rc6]$ Which in turn would make 'perf test vmlinux' to fail because it wouldn't find the symbols before "_stext" in kallsyms. Fix it by using the return value only for errors and storing the address, when the symbol is successfully found, in a provided pointer arg. Before this patch: After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 40693 Looking at the vmlinux_path (8 entries long) Using /usr/lib/debug/lib/modules/3.10.0-654.el7.s390x/vmlinux for symbols ERR : 0: _text not on kallsyms ERR : 0x418: iplstart not on kallsyms ERR : 0x800: start not on kallsyms ERR : 0x80a: .base not on kallsyms ERR : 0x82e: .sk8x8 not on kallsyms ERR : 0x834: .gotr not on kallsyms ERR : 0x842: .cmd not on kallsyms ERR : 0x846: .parm not on kallsyms ERR : 0x84a: .lowcase not on kallsyms ERR : 0x10000: startup not on kallsyms ERR : 0x10010: startup_kdump not on kallsyms ERR : 0x10214: startup_kdump_relocated not on kallsyms ERR : 0x11000: startup_continue not on kallsyms ERR : 0x112a0: _ehead not on kallsyms <SNIP warnings> test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@localhost perf-4.11.0-rc6]$ After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 47160 <SNIP warnings> test child finished with 0 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@localhost perf-4.11.0-rc6]$ Reported-by: Michael Petlan <mpetlan@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9x9bwgd3btwdk1u51xie93fz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-28 07:21:09 +07:00
if (kallsyms__get_function_start(filename, kmap->ref_reloc_sym->name, &addr))
return -1;
*delta = addr - kmap->ref_reloc_sym->addr;
return 0;
}
int __dso__load_kallsyms(struct dso *dso, const char *filename,
struct map *map, bool no_kcore)
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
{
u64 delta = 0;
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 19:53:51 +07:00
if (symbol__restricted_filename(filename, "/proc/kallsyms"))
return -1;
if (dso__load_all_kallsyms(dso, filename, map) < 0)
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
return -1;
if (kallsyms__delta(map, filename, &delta))
return -1;
symbols__fixup_end(&dso->symbols[map->type]);
symbols__fixup_duplicate(&dso->symbols[map->type]);
if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
dso->symtab_type = DSO_BINARY_TYPE__GUEST_KALLSYMS;
else
dso->symtab_type = DSO_BINARY_TYPE__KALLSYMS;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 23:48:56 +07:00
if (!no_kcore && !dso__load_kcore(dso, map, filename))
return dso__split_kallsyms_for_kcore(dso, map);
else
return dso__split_kallsyms(dso, map, delta);
}
int dso__load_kallsyms(struct dso *dso, const char *filename,
struct map *map)
{
return __dso__load_kallsyms(dso, filename, map, false);
}
static int dso__load_perf_map(const char *map_path, struct dso *dso,
struct map *map)
{
char *line = NULL;
size_t n;
FILE *file;
int nr_syms = 0;
file = fopen(map_path, "r");
if (file == NULL)
goto out_failure;
while (!feof(file)) {
u64 start, size;
struct symbol *sym;
int line_len, len;
line_len = getline(&line, &n, file);
if (line_len < 0)
break;
if (!line)
goto out_failure;
line[--line_len] = '\0'; /* \n */
len = hex2u64(line, &start);
len++;
if (len + 2 >= line_len)
continue;
len += hex2u64(line + len, &size);
len++;
if (len + 2 >= line_len)
continue;
sym = symbol__new(start, size, STB_GLOBAL, line + len);
if (sym == NULL)
goto out_delete_line;
symbols__insert(&dso->symbols[map->type], sym);
nr_syms++;
}
free(line);
fclose(file);
return nr_syms;
out_delete_line:
free(line);
out_failure:
return -1;
}
static bool dso__is_compatible_symtab_type(struct dso *dso, bool kmod,
enum dso_binary_type type)
{
switch (type) {
case DSO_BINARY_TYPE__JAVA_JIT:
case DSO_BINARY_TYPE__DEBUGLINK:
case DSO_BINARY_TYPE__SYSTEM_PATH_DSO:
case DSO_BINARY_TYPE__FEDORA_DEBUGINFO:
case DSO_BINARY_TYPE__UBUNTU_DEBUGINFO:
case DSO_BINARY_TYPE__BUILDID_DEBUGINFO:
case DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO:
return !kmod && dso->kernel == DSO_TYPE_USER;
case DSO_BINARY_TYPE__KALLSYMS:
case DSO_BINARY_TYPE__VMLINUX:
case DSO_BINARY_TYPE__KCORE:
return dso->kernel == DSO_TYPE_KERNEL;
case DSO_BINARY_TYPE__GUEST_KALLSYMS:
case DSO_BINARY_TYPE__GUEST_VMLINUX:
case DSO_BINARY_TYPE__GUEST_KCORE:
return dso->kernel == DSO_TYPE_GUEST_KERNEL;
case DSO_BINARY_TYPE__GUEST_KMODULE:
case DSO_BINARY_TYPE__GUEST_KMODULE_COMP:
case DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE:
case DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP:
/*
* kernel modules know their symtab type - it's set when
* creating a module dso in machine__findnew_module_map().
*/
return kmod && dso->symtab_type == type;
case DSO_BINARY_TYPE__BUILD_ID_CACHE:
case DSO_BINARY_TYPE__BUILD_ID_CACHE_DEBUGINFO:
return true;
case DSO_BINARY_TYPE__NOT_FOUND:
default:
return false;
}
}
/* Checks for the existence of the perf-<pid>.map file in two different
* locations. First, if the process is a separate mount namespace, check in
* that namespace using the pid of the innermost pid namespace. If's not in a
* namespace, or the file can't be found there, try in the mount namespace of
* the tracing process using our view of its pid.
*/
static int dso__find_perf_map(char *filebuf, size_t bufsz,
struct nsinfo **nsip)
{
struct nscookie nsc;
struct nsinfo *nsi;
struct nsinfo *nnsi;
int rc = -1;
nsi = *nsip;
if (nsi->need_setns) {
snprintf(filebuf, bufsz, "/tmp/perf-%d.map", nsi->nstgid);
nsinfo__mountns_enter(nsi, &nsc);
rc = access(filebuf, R_OK);
nsinfo__mountns_exit(&nsc);
if (rc == 0)
return rc;
}
nnsi = nsinfo__copy(nsi);
if (nnsi) {
nsinfo__put(nsi);
nnsi->need_setns = false;
snprintf(filebuf, bufsz, "/tmp/perf-%d.map", nnsi->tgid);
*nsip = nnsi;
rc = 0;
}
return rc;
}
int dso__load(struct dso *dso, struct map *map)
{
char *name;
int ret = -1;
u_int i;
struct machine *machine;
char *root_dir = (char *) "";
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
int ss_pos = 0;
struct symsrc ss_[2];
struct symsrc *syms_ss = NULL, *runtime_ss = NULL;
bool kmod;
bool perfmap;
unsigned char build_id[BUILD_ID_SIZE];
struct nscookie nsc;
char newmapname[PATH_MAX];
const char *map_path = dso->long_name;
perfmap = strncmp(dso->name, "/tmp/perf-", 10) == 0;
if (perfmap) {
if (dso->nsinfo && (dso__find_perf_map(newmapname,
sizeof(newmapname), &dso->nsinfo) == 0)) {
map_path = newmapname;
}
}
nsinfo__mountns_enter(dso->nsinfo, &nsc);
pthread_mutex_lock(&dso->lock);
/* check again under the dso->lock */
if (dso__loaded(dso, map->type)) {
ret = 1;
goto out;
}
if (dso->kernel) {
if (dso->kernel == DSO_TYPE_KERNEL)
ret = dso__load_kernel_sym(dso, map);
else if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
ret = dso__load_guest_kernel_sym(dso, map);
goto out;
}
if (map->groups && map->groups->machine)
machine = map->groups->machine;
else
machine = NULL;
dso->adjust_symbols = 0;
if (perfmap) {
struct stat st;
if (lstat(map_path, &st) < 0)
goto out;
if (!symbol_conf.force && st.st_uid && (st.st_uid != geteuid())) {
pr_warning("File %s not owned by current user or root, "
"ignoring it (use -f to override).\n", map_path);
goto out;
}
ret = dso__load_perf_map(map_path, dso, map);
dso->symtab_type = ret > 0 ? DSO_BINARY_TYPE__JAVA_JIT :
DSO_BINARY_TYPE__NOT_FOUND;
goto out;
}
if (machine)
root_dir = machine->root_dir;
name = malloc(PATH_MAX);
if (!name)
goto out;
kmod = dso->symtab_type == DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE ||
dso->symtab_type == DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP ||
dso->symtab_type == DSO_BINARY_TYPE__GUEST_KMODULE ||
dso->symtab_type == DSO_BINARY_TYPE__GUEST_KMODULE_COMP;
/*
* Read the build id if possible. This is required for
* DSO_BINARY_TYPE__BUILDID_DEBUGINFO to work
*/
perf diff: Do not overwrite valid build id Fixes a perf diff regression issue which was introduced by commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") The binary name could be same when perf diff different binaries. Build id is used to distinguish between them. However, the previous patch assumes the same binary name has same build id. So it overwrites the build id according to the binary name, regardless of whether the build id is set or not. Check the has_build_id in dso__load. If the build id is already set, use it. Before the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% -99.80% tchain_edit [.] f2 0.12% +99.81% tchain_edit [.] f3 0.02% -0.01% [ixgbe] [k] ixgbe_read_reg After the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% +0.10% tchain_edit [.] f3 0.12% -0.08% tchain_edit [.] f2 Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> CC: Dima Kogan <dima@secretsauce.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-13 22:29:44 +07:00
if (!dso->has_build_id &&
perf symbols: Take into account symfs setting when reading file build ID After commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") and when --symfs option is used perf failed to pick up symbols for file with the same name between host and sysroot specified by --symfs option. One can see message like this: bin/bash with build id 26f0062cb6950d4d1ab0fd9c43eae8b10ca42062 not found, continuing without symbols It happens because code added by 5baecbcd9c9a opens files directly by dso->long_name without symbol_conf.symfs consideration, which as result picks one from the host. It reads its build ID and later even code finds another proper file in directory pointed by --symfs perf ignores it because build id mismatches. Fix is to use __symbol__join_symfs to adjust file name according to --symfs setting. If no --symfs passed the operation would noop and picks the same host file as before. Also note in latter tree after 5baecbcd9c9a commit additional check for '!dso->has_build_id' was added, so to observe error condition 'perf record' should run with --no-buildid, so perf.data itself would not have build id for target binary in buildid perf section and 'perf report' will pass '!dso->has_build_id' condition. Or target binary should not have build id, but the same binary on host has build id, again '!dso->has_build_id' will pass in this case and incorrect build id could be read if --symfs is used. Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Phlipot <cphlipot0@gmail.com> Cc: Dima Kogan <dima@secretsauce.net> Cc: He Kuang <hekuang@huawei.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: xe-linux-external@cisco.com Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1486424908-17094-1-git-send-email-kamensky@cisco.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-07 06:48:28 +07:00
is_regular_file(dso->long_name)) {
__symbol__join_symfs(name, PATH_MAX, dso->long_name);
if (filename__read_build_id(name, build_id, BUILD_ID_SIZE) > 0)
dso__set_build_id(dso, build_id);
perf symbols: Take into account symfs setting when reading file build ID After commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") and when --symfs option is used perf failed to pick up symbols for file with the same name between host and sysroot specified by --symfs option. One can see message like this: bin/bash with build id 26f0062cb6950d4d1ab0fd9c43eae8b10ca42062 not found, continuing without symbols It happens because code added by 5baecbcd9c9a opens files directly by dso->long_name without symbol_conf.symfs consideration, which as result picks one from the host. It reads its build ID and later even code finds another proper file in directory pointed by --symfs perf ignores it because build id mismatches. Fix is to use __symbol__join_symfs to adjust file name according to --symfs setting. If no --symfs passed the operation would noop and picks the same host file as before. Also note in latter tree after 5baecbcd9c9a commit additional check for '!dso->has_build_id' was added, so to observe error condition 'perf record' should run with --no-buildid, so perf.data itself would not have build id for target binary in buildid perf section and 'perf report' will pass '!dso->has_build_id' condition. Or target binary should not have build id, but the same binary on host has build id, again '!dso->has_build_id' will pass in this case and incorrect build id could be read if --symfs is used. Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Phlipot <cphlipot0@gmail.com> Cc: Dima Kogan <dima@secretsauce.net> Cc: He Kuang <hekuang@huawei.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: xe-linux-external@cisco.com Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1486424908-17094-1-git-send-email-kamensky@cisco.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-07 06:48:28 +07:00
}
/*
* Iterate over candidate debug images.
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
* Keep track of "interesting" ones (those which have a symtab, dynsym,
* and/or opd section) for processing.
*/
for (i = 0; i < DSO_BINARY_TYPE__SYMTAB_CNT; i++) {
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
struct symsrc *ss = &ss_[ss_pos];
bool next_slot = false;
bool is_reg;
bool nsexit;
int sirc;
enum dso_binary_type symtab_type = binary_type_symtab[i];
nsexit = (symtab_type == DSO_BINARY_TYPE__BUILD_ID_CACHE ||
symtab_type == DSO_BINARY_TYPE__BUILD_ID_CACHE_DEBUGINFO);
if (!dso__is_compatible_symtab_type(dso, kmod, symtab_type))
continue;
if (dso__read_binary_type_filename(dso, symtab_type,
root_dir, name, PATH_MAX))
continue;
if (nsexit)
nsinfo__mountns_exit(&nsc);
is_reg = is_regular_file(name);
sirc = symsrc__init(ss, dso, name, symtab_type);
if (nsexit)
nsinfo__mountns_enter(dso->nsinfo, &nsc);
if (!is_reg || sirc < 0) {
if (sirc >= 0)
symsrc__destroy(ss);
continue;
}
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
if (!syms_ss && symsrc__has_symtab(ss)) {
syms_ss = ss;
next_slot = true;
if (!dso->symsrc_filename)
dso->symsrc_filename = strdup(name);
}
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
if (!runtime_ss && symsrc__possibly_runtime(ss)) {
runtime_ss = ss;
next_slot = true;
}
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
if (next_slot) {
ss_pos++;
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
if (syms_ss && runtime_ss)
break;
} else {
symsrc__destroy(ss);
}
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
}
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
if (!runtime_ss && !syms_ss)
goto out_free;
if (runtime_ss && !syms_ss) {
syms_ss = runtime_ss;
}
/* We'll have to hope for the best */
if (!runtime_ss && syms_ss)
runtime_ss = syms_ss;
if (syms_ss)
ret = dso__load_sym(dso, map, syms_ss, runtime_ss, kmod);
else
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
ret = -1;
perf symbols: Fix builds with NO_LIBELF set Build currently fails: $ make -C tools/perf O=/tmp/pbuild NO_LIBELF=1 util/symbol.c: In function ‘dso__load’: util/symbol.c:1128:27: error: ‘struct symsrc’ has no member named ‘dynsym’ CC /tmp/pbuild/util/pager.o make: *** [/tmp/pbuild/util/symbol.o] Error 1 make: *** Waiting for unfinished jobs.... Moving the dynsym reference to symbol-elf.c reveals that NO_LIBELF requires NO_LIBUNWIND: $ make -C tools/perf O=/tmp/pbuild NO_LIBELF=1 LINK /tmp/pbuild/perf /tmp/pbuild/libperf.a(unwind.o): In function `elf_section_offset': /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:176: undefined reference to `elf_begin' /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:181: undefined reference to `gelf_getehdr' /tmp/pbuild/libperf.a(unwind.o): In function `elf_section_by_name': /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:157: undefined reference to `elf_nextscn' /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:160: undefined reference to `gelf_getshdr' /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:161: undefined reference to `elf_strptr' /tmp/pbuild/libperf.a(unwind.o): In function `elf_section_offset': /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:190: undefined reference to `elf_end' /tmp/pbuild/libperf.a(unwind.o): In function `read_unwind_spec': /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:190: undefined reference to `elf_end' collect2: ld returned 1 exit status make: *** [/tmp/pbuild/perf] Error 1 make: Leaving directory `/opt/sw/ahern/perf.git/tools/perf' This patch fixes both. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1345391234-71906-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-19 22:47:14 +07:00
if (ret > 0) {
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
int nr_plt;
nr_plt = dso__synthesize_plt_symbols(dso, runtime_ss, map);
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
if (nr_plt > 0)
ret += nr_plt;
}
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 05:23:02 +07:00
for (; ss_pos > 0; ss_pos--)
symsrc__destroy(&ss_[ss_pos - 1]);
out_free:
free(name);
if (ret < 0 && strstr(dso->name, " (deleted)") != NULL)
ret = 0;
out:
dso__set_loaded(dso, map->type);
pthread_mutex_unlock(&dso->lock);
nsinfo__mountns_exit(&nsc);
return ret;
}
struct map *map_groups__find_by_name(struct map_groups *mg,
enum map_type type, const char *name)
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 13:29:58 +07:00
{
struct maps *maps = &mg->maps[type];
struct map *map;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 13:29:58 +07:00
down_read(&maps->lock);
for (map = maps__first(maps); map; map = map__next(map)) {
if (map->dso && strcmp(map->dso->short_name, name) == 0)
goto out_unlock;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 13:29:58 +07:00
}
map = NULL;
out_unlock:
up_read(&maps->lock);
return map;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 13:29:58 +07:00
}
int dso__load_vmlinux(struct dso *dso, struct map *map,
const char *vmlinux, bool vmlinux_allocated)
{
int err = -1;
struct symsrc ss;
char symfs_vmlinux[PATH_MAX];
enum dso_binary_type symtab_type;
if (vmlinux[0] == '/')
snprintf(symfs_vmlinux, sizeof(symfs_vmlinux), "%s", vmlinux);
else
symbol__join_symfs(symfs_vmlinux, vmlinux);
if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
symtab_type = DSO_BINARY_TYPE__GUEST_VMLINUX;
else
symtab_type = DSO_BINARY_TYPE__VMLINUX;
if (symsrc__init(&ss, dso, symfs_vmlinux, symtab_type))
return -1;
err = dso__load_sym(dso, map, &ss, &ss, 0);
symsrc__destroy(&ss);
if (err > 0) {
if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
dso->binary_type = DSO_BINARY_TYPE__GUEST_VMLINUX;
else
dso->binary_type = DSO_BINARY_TYPE__VMLINUX;
dso__set_long_name(dso, vmlinux, vmlinux_allocated);
dso__set_loaded(dso, map->type);
pr_debug("Using %s for symbols\n", symfs_vmlinux);
}
return err;
}
int dso__load_vmlinux_path(struct dso *dso, struct map *map)
{
int i, err = 0;
perf record: Do not save pathname in ./debug/.build-id directory for vmlinux When perf record finishes a session, it pre-processes samples in order to write build-id info from DSOs that had samples. During this process it'll call map__load() for the kernel map, and it ends up calling dso__load_vmlinux_path() which replaces dso->long_name. But this function checks kernel's build-id before searching vmlinux path so it'll end up with a cryptic name, the pathname for the entry in the ~/.debug cache, which can be confusing to users. This patch adds a flag to skip the build-id check during record, so that it'll have the original vmlinux path for the kernel dso->long_name, not the entry in the ~/.debug cache. Before: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.196 MB perf.data (~8545 samples) ] Looking at the vmlinux_path (7 entries long) Using /home/namhyung/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551 for symbols After: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.193 MB perf.data (~8432 samples) ] Looking at the vmlinux_path (7 entries long) Using /lib/modules/3.16.4-1-ARCH/build/vmlinux for symbols Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1415063674-17206-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-04 08:14:32 +07:00
char *filename = NULL;
perf symbols: Try the .debug/ DSO cache as a last resort Not as the first attempt at finding a vmlinux for the running kernel, this way we get a more informative filename to present in tools, it will check that the build-id is the same as the one previously loaded in the DSO in dso->build_id, reading from /sys/kernel/notes, for instance. E.g. in the annotation TUI, going from 'perf top', for the scsi_sg_alloc kernel function, in the first line: Before: scsi_sg_alloc /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 After: scsi_sg_alloc /lib/modules/4.3.0-rc1+/build/vmlinux And: # ls -la /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 lrwxrwxrwx. 1 root root 81 Sep 22 16:11 /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 -> ../../home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 # file ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped # The same as: # file /lib/modules/4.3.0-rc1+/build/vmlinux /lib/modules/4.3.0-rc1+/build/vmlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped Furthermore: # sha256sum /lib/modules/4.3.0-rc1+/build/vmlinux e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /lib/modules/4.3.0-rc1+/build/vmlinux # sha256sum ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 [root@zoo new]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9y42ikzq3jisiddoi6f07n8z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-12 03:17:24 +07:00
pr_debug("Looking at the vmlinux_path (%d entries long)\n",
vmlinux_path__nr_entries + 1);
for (i = 0; i < vmlinux_path__nr_entries; ++i) {
err = dso__load_vmlinux(dso, map, vmlinux_path[i], false);
perf symbols: Try the .debug/ DSO cache as a last resort Not as the first attempt at finding a vmlinux for the running kernel, this way we get a more informative filename to present in tools, it will check that the build-id is the same as the one previously loaded in the DSO in dso->build_id, reading from /sys/kernel/notes, for instance. E.g. in the annotation TUI, going from 'perf top', for the scsi_sg_alloc kernel function, in the first line: Before: scsi_sg_alloc /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 After: scsi_sg_alloc /lib/modules/4.3.0-rc1+/build/vmlinux And: # ls -la /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 lrwxrwxrwx. 1 root root 81 Sep 22 16:11 /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 -> ../../home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 # file ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped # The same as: # file /lib/modules/4.3.0-rc1+/build/vmlinux /lib/modules/4.3.0-rc1+/build/vmlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped Furthermore: # sha256sum /lib/modules/4.3.0-rc1+/build/vmlinux e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /lib/modules/4.3.0-rc1+/build/vmlinux # sha256sum ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 [root@zoo new]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9y42ikzq3jisiddoi6f07n8z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-12 03:17:24 +07:00
if (err > 0)
goto out;
}
perf record: Do not save pathname in ./debug/.build-id directory for vmlinux When perf record finishes a session, it pre-processes samples in order to write build-id info from DSOs that had samples. During this process it'll call map__load() for the kernel map, and it ends up calling dso__load_vmlinux_path() which replaces dso->long_name. But this function checks kernel's build-id before searching vmlinux path so it'll end up with a cryptic name, the pathname for the entry in the ~/.debug cache, which can be confusing to users. This patch adds a flag to skip the build-id check during record, so that it'll have the original vmlinux path for the kernel dso->long_name, not the entry in the ~/.debug cache. Before: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.196 MB perf.data (~8545 samples) ] Looking at the vmlinux_path (7 entries long) Using /home/namhyung/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551 for symbols After: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.193 MB perf.data (~8432 samples) ] Looking at the vmlinux_path (7 entries long) Using /lib/modules/3.16.4-1-ARCH/build/vmlinux for symbols Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1415063674-17206-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-04 08:14:32 +07:00
if (!symbol_conf.ignore_vmlinux_buildid)
filename = dso__build_id_filename(dso, NULL, 0, false);
if (filename != NULL) {
err = dso__load_vmlinux(dso, map, filename, true);
if (err > 0)
goto out;
free(filename);
}
out:
return err;
}
static bool visible_dir_filter(const char *name, struct dirent *d)
{
if (d->d_type != DT_DIR)
return false;
return lsdir_no_dot_filter(name, d);
}
static int find_matching_kcore(struct map *map, char *dir, size_t dir_sz)
{
char kallsyms_filename[PATH_MAX];
int ret = -1;
struct strlist *dirs;
struct str_node *nd;
dirs = lsdir(dir, visible_dir_filter);
if (!dirs)
return -1;
strlist__for_each_entry(nd, dirs) {
scnprintf(kallsyms_filename, sizeof(kallsyms_filename),
"%s/%s/kallsyms", dir, nd->s);
if (!validate_kcore_addresses(kallsyms_filename, map)) {
strlcpy(dir, kallsyms_filename, dir_sz);
ret = 0;
break;
}
}
strlist__delete(dirs);
return ret;
}
/*
* Use open(O_RDONLY) to check readability directly instead of access(R_OK)
* since access(R_OK) only checks with real UID/GID but open() use effective
* UID/GID and actual capabilities (e.g. /proc/kcore requires CAP_SYS_RAWIO).
*/
static bool filename__readable(const char *file)
{
int fd = open(file, O_RDONLY);
if (fd < 0)
return false;
close(fd);
return true;
}
static char *dso__find_kallsyms(struct dso *dso, struct map *map)
{
u8 host_build_id[BUILD_ID_SIZE];
char sbuild_id[SBUILD_ID_SIZE];
bool is_host = false;
char path[PATH_MAX];
if (!dso->has_build_id) {
/*
* Last resort, if we don't have a build-id and couldn't find
* any vmlinux file, try the running kernel kallsyms table.
*/
goto proc_kallsyms;
}
if (sysfs__read_build_id("/sys/kernel/notes", host_build_id,
sizeof(host_build_id)) == 0)
is_host = dso__build_id_equal(dso, host_build_id);
/* Try a fast path for /proc/kallsyms if possible */
if (is_host) {
/*
* Do not check the build-id cache, unless we know we cannot use
* /proc/kcore or module maps don't match to /proc/kallsyms.
* To check readability of /proc/kcore, do not use access(R_OK)
* since /proc/kcore requires CAP_SYS_RAWIO to read and access
* can't check it.
*/
if (filename__readable("/proc/kcore") &&
!validate_kcore_addresses("/proc/kallsyms", map))
goto proc_kallsyms;
}
build_id__sprintf(dso->build_id, sizeof(dso->build_id), sbuild_id);
/* Find kallsyms in build-id cache with kcore */
scnprintf(path, sizeof(path), "%s/%s/%s",
buildid_dir, DSO__NAME_KCORE, sbuild_id);
if (!find_matching_kcore(map, path, sizeof(path)))
return strdup(path);
/* Use current /proc/kallsyms if possible */
if (is_host) {
proc_kallsyms:
return strdup("/proc/kallsyms");
}
/* Finally, find a cache of kallsyms */
if (!build_id_cache__kallsyms_path(sbuild_id, path, sizeof(path))) {
pr_err("No kallsyms or vmlinux with build-id %s was found\n",
sbuild_id);
return NULL;
}
return strdup(path);
}
static int dso__load_kernel_sym(struct dso *dso, struct map *map)
{
int err;
const char *kallsyms_filename = NULL;
char *kallsyms_allocated_filename = NULL;
/*
* Step 1: if the user specified a kallsyms or vmlinux filename, use
* it and only it, reporting errors to the user if it cannot be used.
*
* For instance, try to analyse an ARM perf.data file _without_ a
* build-id, or if the user specifies the wrong path to the right
* vmlinux file, obviously we can't fallback to another vmlinux (a
* x86_86 one, on the machine where analysis is being performed, say),
* or worse, /proc/kallsyms.
*
* If the specified file _has_ a build-id and there is a build-id
* section in the perf.data file, we will still do the expected
* validation in dso__load_vmlinux and will bail out if they don't
* match.
*/
if (symbol_conf.kallsyms_name != NULL) {
kallsyms_filename = symbol_conf.kallsyms_name;
goto do_kallsyms;
}
if (!symbol_conf.ignore_vmlinux && symbol_conf.vmlinux_name != NULL) {
return dso__load_vmlinux(dso, map, symbol_conf.vmlinux_name, false);
}
if (!symbol_conf.ignore_vmlinux && vmlinux_path != NULL) {
err = dso__load_vmlinux_path(dso, map);
if (err > 0)
return err;
}
/* do not try local files if a symfs was given */
if (symbol_conf.symfs[0] != 0)
return -1;
kallsyms_allocated_filename = dso__find_kallsyms(dso, map);
if (!kallsyms_allocated_filename)
return -1;
kallsyms_filename = kallsyms_allocated_filename;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 13:29:58 +07:00
do_kallsyms:
err = dso__load_kallsyms(dso, kallsyms_filename, map);
if (err > 0)
pr_debug("Using %s for symbols\n", kallsyms_filename);
free(kallsyms_allocated_filename);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 13:29:58 +07:00
if (err > 0 && !dso__is_kcore(dso)) {
dso->binary_type = DSO_BINARY_TYPE__KALLSYMS;
dso__set_long_name(dso, DSO__NAME_KALLSYMS, false);
map__fixup_start(map);
map__fixup_end(map);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 13:29:58 +07:00
}
return err;
}
static int dso__load_guest_kernel_sym(struct dso *dso, struct map *map)
{
int err;
const char *kallsyms_filename = NULL;
struct machine *machine;
char path[PATH_MAX];
if (!map->groups) {
pr_debug("Guest kernel map hasn't the point to groups\n");
return -1;
}
machine = map->groups->machine;
if (machine__is_default_guest(machine)) {
/*
* if the user specified a vmlinux filename, use it and only
* it, reporting errors to the user if it cannot be used.
* Or use file guest_kallsyms inputted by user on commandline
*/
if (symbol_conf.default_guest_vmlinux_name != NULL) {
err = dso__load_vmlinux(dso, map,
symbol_conf.default_guest_vmlinux_name,
false);
return err;
}
kallsyms_filename = symbol_conf.default_guest_kallsyms;
if (!kallsyms_filename)
return -1;
} else {
sprintf(path, "%s/proc/kallsyms", machine->root_dir);
kallsyms_filename = path;
}
err = dso__load_kallsyms(dso, kallsyms_filename, map);
if (err > 0)
pr_debug("Using %s for symbols\n", kallsyms_filename);
if (err > 0 && !dso__is_kcore(dso)) {
dso->binary_type = DSO_BINARY_TYPE__GUEST_KALLSYMS;
machine__mmap_name(machine, path, sizeof(path));
dso__set_long_name(dso, strdup(path), true);
map__fixup_start(map);
map__fixup_end(map);
}
return err;
}
static void vmlinux_path__exit(void)
{
while (--vmlinux_path__nr_entries >= 0)
zfree(&vmlinux_path[vmlinux_path__nr_entries]);
vmlinux_path__nr_entries = 0;
zfree(&vmlinux_path);
}
static const char * const vmlinux_paths[] = {
"vmlinux",
"/boot/vmlinux"
};
static const char * const vmlinux_paths_upd[] = {
"/boot/vmlinux-%s",
"/usr/lib/debug/boot/vmlinux-%s",
"/lib/modules/%s/build/vmlinux",
"/usr/lib/debug/lib/modules/%s/vmlinux",
"/usr/lib/debug/boot/vmlinux-%s.debug"
};
static int vmlinux_path__add(const char *new_entry)
{
vmlinux_path[vmlinux_path__nr_entries] = strdup(new_entry);
if (vmlinux_path[vmlinux_path__nr_entries] == NULL)
return -1;
++vmlinux_path__nr_entries;
return 0;
}
static int vmlinux_path__init(struct perf_env *env)
{
struct utsname uts;
char bf[PATH_MAX];
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 13:40:45 +07:00
char *kernel_version;
unsigned int i;
vmlinux_path = malloc(sizeof(char *) * (ARRAY_SIZE(vmlinux_paths) +
ARRAY_SIZE(vmlinux_paths_upd)));
if (vmlinux_path == NULL)
return -1;
for (i = 0; i < ARRAY_SIZE(vmlinux_paths); i++)
if (vmlinux_path__add(vmlinux_paths[i]) < 0)
goto out_fail;
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 13:40:45 +07:00
/* only try kernel version if no symfs was given */
if (symbol_conf.symfs[0] != 0)
return 0;
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 13:40:45 +07:00
if (env) {
kernel_version = env->os_release;
} else {
if (uname(&uts) < 0)
goto out_fail;
kernel_version = uts.release;
}
for (i = 0; i < ARRAY_SIZE(vmlinux_paths_upd); i++) {
snprintf(bf, sizeof(bf), vmlinux_paths_upd[i], kernel_version);
if (vmlinux_path__add(bf) < 0)
goto out_fail;
}
return 0;
out_fail:
vmlinux_path__exit();
return -1;
}
int setup_list(struct strlist **list, const char *list_str,
const char *list_name)
{
if (list_str == NULL)
return 0;
*list = strlist__new(list_str, NULL);
if (!*list) {
pr_err("problems parsing %s list\n", list_name);
return -1;
}
symbol_conf.has_filter = true;
return 0;
}
int setup_intlist(struct intlist **list, const char *list_str,
const char *list_name)
{
if (list_str == NULL)
return 0;
*list = intlist__new(list_str);
if (!*list) {
pr_err("problems parsing %s list\n", list_name);
return -1;
}
return 0;
}
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 19:53:51 +07:00
static bool symbol__read_kptr_restrict(void)
{
bool value = false;
FILE *fp = fopen("/proc/sys/kernel/kptr_restrict", "r");
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 19:53:51 +07:00
if (fp != NULL) {
char line[8];
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 19:53:51 +07:00
if (fgets(line, sizeof(line), fp) != NULL)
value = ((geteuid() != 0) || (getuid() != 0)) ?
(atoi(line) != 0) :
(atoi(line) == 2);
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 19:53:51 +07:00
fclose(fp);
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 19:53:51 +07:00
}
return value;
}
int symbol__annotation_init(void)
{
if (symbol_conf.initialized) {
pr_err("Annotation needs to be init before symbol__init()\n");
return -1;
}
if (symbol_conf.init_annotation) {
pr_warning("Annotation being initialized multiple times\n");
return 0;
}
symbol_conf.priv_size += sizeof(struct annotation);
symbol_conf.init_annotation = true;
return 0;
}
int symbol__init(struct perf_env *env)
{
const char *symfs;
if (symbol_conf.initialized)
return 0;
perf tools: fix ALIGN redefinition in system headers On some systems (e.g. Android), ALIGN is defined in system headers as ALIGN(p). The definition of ALIGN used in perf takes 2 parameters: ALIGN(x,a). This leads to redefinition conflicts. Redefinition error on Android: In file included from util/include/linux/list.h:1:0, from util/callchain.h:5, from util/hist.h:6, from util/session.h:4, from util/build-id.h:4, from util/annotate.c:11: util/include/linux/kernel.h:11:0: error: "ALIGN" redefined [-Werror] bionic/libc/include/sys/param.h:38:0: note: this is the location of the previous definition Conflics with system defined ALIGN in Android: util/event.c: In function 'perf_event__synthesize_comm': util/event.c:115:32: error: macro "ALIGN" passed 2 arguments, but takes just 1 util/event.c:115:9: error: 'ALIGN' undeclared (first use in this function) util/event.c:115:9: note: each undeclared identifier is reported only once for each function it appears in In order to avoid this redefinition, ALIGN is renamed to PERF_ALIGN. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Irina Tirdea <irina.tirdea@intel.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-5-git-send-email-irina.tirdea@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 05:15:01 +07:00
symbol_conf.priv_size = PERF_ALIGN(symbol_conf.priv_size, sizeof(u64));
symbol__elf_init();
if (symbol_conf.sort_by_name)
symbol_conf.priv_size += (sizeof(struct symbol_name_rb_node) -
sizeof(struct symbol));
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 13:40:45 +07:00
if (symbol_conf.try_vmlinux_path && vmlinux_path__init(env) < 0)
return -1;
if (symbol_conf.field_sep && *symbol_conf.field_sep == '.') {
pr_err("'.' is the only non valid --field-separator argument\n");
return -1;
}
if (setup_list(&symbol_conf.dso_list,
symbol_conf.dso_list_str, "dso") < 0)
return -1;
if (setup_list(&symbol_conf.comm_list,
symbol_conf.comm_list_str, "comm") < 0)
goto out_free_dso_list;
if (setup_intlist(&symbol_conf.pid_list,
symbol_conf.pid_list_str, "pid") < 0)
goto out_free_comm_list;
if (setup_intlist(&symbol_conf.tid_list,
symbol_conf.tid_list_str, "tid") < 0)
goto out_free_pid_list;
if (setup_list(&symbol_conf.sym_list,
symbol_conf.sym_list_str, "symbol") < 0)
goto out_free_tid_list;
perf script: Add option to stop printing callchain Allow user to specify list of symbols which cause the dump of callchains to stop at that symbol. Committer notes: Testing it: # perf record -ag usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ] # # # Without it: # # perf script swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) 137f419 x86_64_start_kernel ([kernel.vmlinux].init.text) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) # # # Using it to see just what are the calls from the 'remote_function' function: # # perf script --stop-bt remote_function swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-26 03:00:21 +07:00
if (setup_list(&symbol_conf.bt_stop_list,
symbol_conf.bt_stop_list_str, "symbol") < 0)
goto out_free_sym_list;
/*
* A path to symbols of "/" is identical to ""
* reset here for simplicity.
*/
symfs = realpath(symbol_conf.symfs, NULL);
if (symfs == NULL)
symfs = symbol_conf.symfs;
if (strcmp(symfs, "/") == 0)
symbol_conf.symfs = "";
if (symfs != symbol_conf.symfs)
free((void *)symfs);
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 19:53:51 +07:00
symbol_conf.kptr_restrict = symbol__read_kptr_restrict();
symbol_conf.initialized = true;
return 0;
perf script: Add option to stop printing callchain Allow user to specify list of symbols which cause the dump of callchains to stop at that symbol. Committer notes: Testing it: # perf record -ag usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ] # # # Without it: # # perf script swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) 137f419 x86_64_start_kernel ([kernel.vmlinux].init.text) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) # # # Using it to see just what are the calls from the 'remote_function' function: # # perf script --stop-bt remote_function swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-26 03:00:21 +07:00
out_free_sym_list:
strlist__delete(symbol_conf.sym_list);
out_free_tid_list:
intlist__delete(symbol_conf.tid_list);
out_free_pid_list:
intlist__delete(symbol_conf.pid_list);
out_free_comm_list:
strlist__delete(symbol_conf.comm_list);
out_free_dso_list:
strlist__delete(symbol_conf.dso_list);
return -1;
}
void symbol__exit(void)
{
if (!symbol_conf.initialized)
return;
perf script: Add option to stop printing callchain Allow user to specify list of symbols which cause the dump of callchains to stop at that symbol. Committer notes: Testing it: # perf record -ag usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ] # # # Without it: # # perf script swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) 137f419 x86_64_start_kernel ([kernel.vmlinux].init.text) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) # # # Using it to see just what are the calls from the 'remote_function' function: # # perf script --stop-bt remote_function swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-26 03:00:21 +07:00
strlist__delete(symbol_conf.bt_stop_list);
strlist__delete(symbol_conf.sym_list);
strlist__delete(symbol_conf.dso_list);
strlist__delete(symbol_conf.comm_list);
intlist__delete(symbol_conf.tid_list);
intlist__delete(symbol_conf.pid_list);
vmlinux_path__exit();
symbol_conf.sym_list = symbol_conf.dso_list = symbol_conf.comm_list = NULL;
perf script: Add option to stop printing callchain Allow user to specify list of symbols which cause the dump of callchains to stop at that symbol. Committer notes: Testing it: # perf record -ag usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ] # # # Without it: # # perf script swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) 137f419 x86_64_start_kernel ([kernel.vmlinux].init.text) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) # # # Using it to see just what are the calls from the 'remote_function' function: # # perf script --stop-bt remote_function swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-26 03:00:21 +07:00
symbol_conf.bt_stop_list = NULL;
symbol_conf.initialized = false;
}
int symbol__config_symfs(const struct option *opt __maybe_unused,
const char *dir, int unset __maybe_unused)
{
char *bf = NULL;
int ret;
symbol_conf.symfs = strdup(dir);
if (symbol_conf.symfs == NULL)
return -ENOMEM;
/* skip the locally configured cache if a symfs is given, and
* config buildid dir to symfs/.debug
*/
ret = asprintf(&bf, "%s/%s", dir, ".debug");
if (ret < 0)
return -ENOMEM;
set_buildid_dir(bf);
free(bf);
return 0;
}