linux_dsm_epyc7002/drivers/usb/host/ehci-fsl.c

738 lines
19 KiB
C
Raw Normal View History

/*
* Copyright 2005-2009 MontaVista Software, Inc.
* Copyright 2008,2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
* by Hunter Wu.
* Power Management support by Dave Liu <daveliu@freescale.com>,
* Jerry Huang <Chang-Ming.Huang@freescale.com> and
* Anton Vorontsov <avorontsov@ru.mvista.com>.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
#include "ehci-fsl.h"
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
/**
* usb_hcd_fsl_probe - initialize FSL-based HCDs
* @drvier: Driver to be used for this HCD
* @pdev: USB Host Controller being probed
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller.
*
*/
static int usb_hcd_fsl_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata;
struct usb_hcd *hcd;
struct resource *res;
int irq;
int retval;
pr_debug("initializing FSL-SOC USB Controller\n");
/* Need platform data for setup */
pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev,
"No platform data for %s.\n", dev_name(&pdev->dev));
return -ENODEV;
}
/*
* This is a host mode driver, verify that we're supposed to be
* in host mode.
*/
if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
(pdata->operating_mode == FSL_USB2_MPH_HOST) ||
(pdata->operating_mode == FSL_USB2_DR_OTG))) {
dev_err(&pdev->dev,
"Non Host Mode configured for %s. Wrong driver linked.\n",
dev_name(&pdev->dev));
return -ENODEV;
}
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(&pdev->dev,
"Found HC with no IRQ. Check %s setup!\n",
dev_name(&pdev->dev));
return -ENODEV;
}
irq = res->start;
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
goto err1;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev,
"Found HC with no register addr. Check %s setup!\n",
dev_name(&pdev->dev));
retval = -ENODEV;
goto err2;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
dev_dbg(&pdev->dev, "controller already in use\n");
retval = -EBUSY;
goto err2;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (hcd->regs == NULL) {
dev_dbg(&pdev->dev, "error mapping memory\n");
retval = -EFAULT;
goto err3;
}
pdata->regs = hcd->regs;
if (pdata->power_budget)
hcd->power_budget = pdata->power_budget;
/*
* do platform specific init: check the clock, grab/config pins, etc.
*/
if (pdata->init && pdata->init(pdev)) {
retval = -ENODEV;
goto err4;
}
/* Enable USB controller, 83xx or 8536 */
if (pdata->have_sysif_regs)
setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
/* Don't need to set host mode here. It will be done by tdi_reset() */
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval != 0)
goto err4;
#ifdef CONFIG_USB_OTG
if (pdata->operating_mode == FSL_USB2_DR_OTG) {
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJP8VcOAAoJEIaOsuA1yqREeNYQAIxHOteF78nx5gMwB20agndf vYCOB3Jymc67vcLuEf60lqoVBuQ7bxGsJyx+HlNkKrVQQfF8enL9UBhUDwvmKytm Z1FBVmuA33PxS2aGSODkgafODO6wfnp5USzzYjEG+Hu6Q9Zt4rJ3NYakYFXdbrM3 kT3uZ2uwuOd/B1Pzt8oiMSbiF16kLeX0a6m6C4KEFViX0uGHAe/KqN4b9eSbO41q 16fvfthbAaqqSpEoMusI+kCFLku7ib3CXl5d4kgik7C7+wY08JTDWhWBMIl6wiFz LeDIXfoX0MgEcB3vDszGCf2pgtCNR8rfl/pzuLvr6F6p+Cj6CqtgsfV8HCe43Dzr RI7Fewl1xdz6MztKRBgr75RxqZ6VA91gLWT21nDI72DEBwyBJ1pk882CxkxSLK+b VNtI/La9JZkUqb0PXioD0a4JUVpzw5nLatpw1PXZoLUgSozVXmhDE6Wjhl/jvl4y ZVQVRQn2ZcyNzYY9bG2X08zyDRRvurXFfQ20CfAeBpgvvfccN9e5vGdWVbohwZro Vn1x+fSyb6KqVOeYlzpAKf+UGXE9UM53YKpjFnmrstqUjbL5ByW2pZn5fYgJP08v 9im3SXwvs3Iz2mzwenRFUpI6PDuaTnIWgB7qquFDY1QwFyAKoPJuVN81/iPCisUM bIYQILhqgTNNjsnPmpCr =HwsA -----END PGP SIGNATURE----- Merge tag 'xceiv-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap.
2012-07-06 05:35:41 +07:00
hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2);
dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n",
hcd, ehci, hcd->phy);
usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJP8VcOAAoJEIaOsuA1yqREeNYQAIxHOteF78nx5gMwB20agndf vYCOB3Jymc67vcLuEf60lqoVBuQ7bxGsJyx+HlNkKrVQQfF8enL9UBhUDwvmKytm Z1FBVmuA33PxS2aGSODkgafODO6wfnp5USzzYjEG+Hu6Q9Zt4rJ3NYakYFXdbrM3 kT3uZ2uwuOd/B1Pzt8oiMSbiF16kLeX0a6m6C4KEFViX0uGHAe/KqN4b9eSbO41q 16fvfthbAaqqSpEoMusI+kCFLku7ib3CXl5d4kgik7C7+wY08JTDWhWBMIl6wiFz LeDIXfoX0MgEcB3vDszGCf2pgtCNR8rfl/pzuLvr6F6p+Cj6CqtgsfV8HCe43Dzr RI7Fewl1xdz6MztKRBgr75RxqZ6VA91gLWT21nDI72DEBwyBJ1pk882CxkxSLK+b VNtI/La9JZkUqb0PXioD0a4JUVpzw5nLatpw1PXZoLUgSozVXmhDE6Wjhl/jvl4y ZVQVRQn2ZcyNzYY9bG2X08zyDRRvurXFfQ20CfAeBpgvvfccN9e5vGdWVbohwZro Vn1x+fSyb6KqVOeYlzpAKf+UGXE9UM53YKpjFnmrstqUjbL5ByW2pZn5fYgJP08v 9im3SXwvs3Iz2mzwenRFUpI6PDuaTnIWgB7qquFDY1QwFyAKoPJuVN81/iPCisUM bIYQILhqgTNNjsnPmpCr =HwsA -----END PGP SIGNATURE----- Merge tag 'xceiv-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap.
2012-07-06 05:35:41 +07:00
if (!IS_ERR_OR_NULL(hcd->phy)) {
retval = otg_set_host(hcd->phy->otg,
&ehci_to_hcd(ehci)->self);
if (retval) {
usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJP8VcOAAoJEIaOsuA1yqREeNYQAIxHOteF78nx5gMwB20agndf vYCOB3Jymc67vcLuEf60lqoVBuQ7bxGsJyx+HlNkKrVQQfF8enL9UBhUDwvmKytm Z1FBVmuA33PxS2aGSODkgafODO6wfnp5USzzYjEG+Hu6Q9Zt4rJ3NYakYFXdbrM3 kT3uZ2uwuOd/B1Pzt8oiMSbiF16kLeX0a6m6C4KEFViX0uGHAe/KqN4b9eSbO41q 16fvfthbAaqqSpEoMusI+kCFLku7ib3CXl5d4kgik7C7+wY08JTDWhWBMIl6wiFz LeDIXfoX0MgEcB3vDszGCf2pgtCNR8rfl/pzuLvr6F6p+Cj6CqtgsfV8HCe43Dzr RI7Fewl1xdz6MztKRBgr75RxqZ6VA91gLWT21nDI72DEBwyBJ1pk882CxkxSLK+b VNtI/La9JZkUqb0PXioD0a4JUVpzw5nLatpw1PXZoLUgSozVXmhDE6Wjhl/jvl4y ZVQVRQn2ZcyNzYY9bG2X08zyDRRvurXFfQ20CfAeBpgvvfccN9e5vGdWVbohwZro Vn1x+fSyb6KqVOeYlzpAKf+UGXE9UM53YKpjFnmrstqUjbL5ByW2pZn5fYgJP08v 9im3SXwvs3Iz2mzwenRFUpI6PDuaTnIWgB7qquFDY1QwFyAKoPJuVN81/iPCisUM bIYQILhqgTNNjsnPmpCr =HwsA -----END PGP SIGNATURE----- Merge tag 'xceiv-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap.
2012-07-06 05:35:41 +07:00
usb_put_phy(hcd->phy);
goto err4;
}
} else {
dev_err(&pdev->dev, "can't find phy\n");
retval = -ENODEV;
goto err4;
}
}
#endif
return retval;
err4:
iounmap(hcd->regs);
err3:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err2:
usb_put_hcd(hcd);
err1:
dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
if (pdata->exit)
pdata->exit(pdev);
return retval;
}
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/**
* usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_fsl_probe().
*
*/
static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJP8VcOAAoJEIaOsuA1yqREeNYQAIxHOteF78nx5gMwB20agndf vYCOB3Jymc67vcLuEf60lqoVBuQ7bxGsJyx+HlNkKrVQQfF8enL9UBhUDwvmKytm Z1FBVmuA33PxS2aGSODkgafODO6wfnp5USzzYjEG+Hu6Q9Zt4rJ3NYakYFXdbrM3 kT3uZ2uwuOd/B1Pzt8oiMSbiF16kLeX0a6m6C4KEFViX0uGHAe/KqN4b9eSbO41q 16fvfthbAaqqSpEoMusI+kCFLku7ib3CXl5d4kgik7C7+wY08JTDWhWBMIl6wiFz LeDIXfoX0MgEcB3vDszGCf2pgtCNR8rfl/pzuLvr6F6p+Cj6CqtgsfV8HCe43Dzr RI7Fewl1xdz6MztKRBgr75RxqZ6VA91gLWT21nDI72DEBwyBJ1pk882CxkxSLK+b VNtI/La9JZkUqb0PXioD0a4JUVpzw5nLatpw1PXZoLUgSozVXmhDE6Wjhl/jvl4y ZVQVRQn2ZcyNzYY9bG2X08zyDRRvurXFfQ20CfAeBpgvvfccN9e5vGdWVbohwZro Vn1x+fSyb6KqVOeYlzpAKf+UGXE9UM53YKpjFnmrstqUjbL5ByW2pZn5fYgJP08v 9im3SXwvs3Iz2mzwenRFUpI6PDuaTnIWgB7qquFDY1QwFyAKoPJuVN81/iPCisUM bIYQILhqgTNNjsnPmpCr =HwsA -----END PGP SIGNATURE----- Merge tag 'xceiv-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap.
2012-07-06 05:35:41 +07:00
if (!IS_ERR_OR_NULL(hcd->phy)) {
otg_set_host(hcd->phy->otg, NULL);
usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJP8VcOAAoJEIaOsuA1yqREeNYQAIxHOteF78nx5gMwB20agndf vYCOB3Jymc67vcLuEf60lqoVBuQ7bxGsJyx+HlNkKrVQQfF8enL9UBhUDwvmKytm Z1FBVmuA33PxS2aGSODkgafODO6wfnp5USzzYjEG+Hu6Q9Zt4rJ3NYakYFXdbrM3 kT3uZ2uwuOd/B1Pzt8oiMSbiF16kLeX0a6m6C4KEFViX0uGHAe/KqN4b9eSbO41q 16fvfthbAaqqSpEoMusI+kCFLku7ib3CXl5d4kgik7C7+wY08JTDWhWBMIl6wiFz LeDIXfoX0MgEcB3vDszGCf2pgtCNR8rfl/pzuLvr6F6p+Cj6CqtgsfV8HCe43Dzr RI7Fewl1xdz6MztKRBgr75RxqZ6VA91gLWT21nDI72DEBwyBJ1pk882CxkxSLK+b VNtI/La9JZkUqb0PXioD0a4JUVpzw5nLatpw1PXZoLUgSozVXmhDE6Wjhl/jvl4y ZVQVRQn2ZcyNzYY9bG2X08zyDRRvurXFfQ20CfAeBpgvvfccN9e5vGdWVbohwZro Vn1x+fSyb6KqVOeYlzpAKf+UGXE9UM53YKpjFnmrstqUjbL5ByW2pZn5fYgJP08v 9im3SXwvs3Iz2mzwenRFUpI6PDuaTnIWgB7qquFDY1QwFyAKoPJuVN81/iPCisUM bIYQILhqgTNNjsnPmpCr =HwsA -----END PGP SIGNATURE----- Merge tag 'xceiv-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap.
2012-07-06 05:35:41 +07:00
usb_put_phy(hcd->phy);
}
usb_remove_hcd(hcd);
/*
* do platform specific un-initialization:
* release iomux pins, disable clock, etc.
*/
if (pdata->exit)
pdata->exit(pdev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
}
static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
enum fsl_usb2_phy_modes phy_mode,
unsigned int port_offset)
{
u32 portsc;
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
void __iomem *non_ehci = hcd->regs;
struct device *dev = hcd->self.controller;
struct fsl_usb2_platform_data *pdata = dev->platform_data;
USB: ehci-fsl: Fix kernel crash on mpc5121e Since commit 28c56ea1431421dec51b7b229369e991481453df (powerpc/usb: fix bug of kernel hang when initializing usb) the kernel crashes on mpc5121e. mpc5121e doesn't have system interface registers, accessing this register address space cause the machine check exception and a kernel crash: ... [ 1.294596] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.316491] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller [ 1.337334] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 [ 1.358548] Machine check in kernel mode. [ 1.375917] Caused by (from SRR1=49030): Transfer error ack signal [ 1.395505] Oops: Machine check, sig: 7 [#1] [ 1.413113] MPC5121 ADS [ 1.428718] Modules linked in: [ 1.444841] NIP: c026efc4 LR: c0278b50 CTR: 00000000 [ 1.463342] REGS: df837ba0 TRAP: 0200 Not tainted (3.3.0-08839-gb5174fa) [ 1.484083] MSR: 00049030 <EE,ME,IR,DR> CR: 42042022 XER: 20000000 [ 1.504099] TASK = df834000[1] 'swapper' THREAD: df836000 [ 1.509667] GPR00: 1c000000 df837c50 df834000 df9d74e0 00000003 00000010 00000000 00000000 [ 1.531650] GPR08: 00000020 00000000 c037cdd8 e1088000 22042028 1001a69c 00000000 00000000 [ 1.553762] GPR16: 1ffbce70 00000000 1fef5b28 1fef3e08 00000000 00000000 1ffcbc7c c045b264 [ 1.575824] GPR24: 0000008b 00000002 c04a7dd0 e1088000 df33c960 df9d74e0 00000000 df9d7400 [ 1.612295] NIP [c026efc4] ehci_fsl_setup_phy+0x110/0x124 [ 1.632454] LR [c0278b50] ehci_fsl_setup+0x29c/0x304 [ 1.652065] Call Trace: [ 1.668923] [df837c50] [c0278a40] ehci_fsl_setup+0x18c/0x304 (unreliable) [ 1.690332] [df837c70] [c025cba4] usb_add_hcd+0x1f0/0x66c [ 1.710377] [df837cb0] [c0277ab8] ehci_fsl_drv_probe+0x180/0x308 [ 1.731322] [df837ce0] [c01fc7a8] platform_drv_probe+0x20/0x30 [ 1.752202] [df837cf0] [c01fb0ac] driver_probe_device+0x8c/0x214 [ 1.773491] [df837d10] [c01f956c] bus_for_each_drv+0x6c/0xa8 [ 1.794279] [df837d40] [c01fafdc] device_attach+0xb4/0xd8 [ 1.814574] [df837d60] [c01fa44c] bus_probe_device+0xa4/0xb4 [ 1.835343] [df837d80] [c01f87a8] device_add+0x52c/0x5dc [ 1.855462] [df837dd0] [c01fcd58] platform_device_add+0x124/0x1d0 [ 1.876558] [df837df0] [c036dcec] fsl_usb2_device_register+0xa0/0xd4 [ 1.897512] [df837e10] [c036df28] fsl_usb2_mph_dr_of_probe+0x208/0x264 [ 1.918253] [df837e90] [c01fc7a8] platform_drv_probe+0x20/0x30 [ 1.938300] [df837ea0] [c01fb0ac] driver_probe_device+0x8c/0x214 [ 1.958511] [df837ec0] [c01fb2f0] __driver_attach+0xbc/0xc0 [ 1.978088] [df837ee0] [c01f9608] bus_for_each_dev+0x60/0x9c [ 1.997589] [df837f10] [c01fab88] driver_attach+0x24/0x34 [ 2.016757] [df837f20] [c01fa744] bus_add_driver+0x1ac/0x274 [ 2.036339] [df837f50] [c01fb898] driver_register+0x88/0x150 [ 2.056052] [df837f70] [c01fcabc] platform_driver_register+0x68/0x78 [ 2.076650] [df837f80] [c0446500] fsl_usb2_mph_dr_driver_init+0x18/0x28 [ 2.097734] [df837f90] [c0003988] do_one_initcall+0x148/0x1b0 [ 2.117934] [df837fc0] [c042d89c] kernel_init+0xfc/0x190 [ 2.137667] [df837ff0] [c000d2c4] kernel_thread+0x4c/0x68 [ 2.157240] Instruction dump: [ 2.174119] 90050004 4e800020 2f840003 419e0014 2f840004 409eff64 6400c000 4bffff5c [ 2.196000] 64001000 7c0004ac 812b0500 0c090000 <4c00012c> 61290200 7c0004ac 912b0500 [ 2.218100] ---[ end trace 21659aedb84ad816 ]--- [ 2.237089] [ 3.232940] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.232954] [ 3.271575] Rebooting in 1 seconds.. Check pdata->have_sysif_regs flag before accessing system interface registers. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 15:48:11 +07:00
if (pdata->controller_ver < 0) {
dev_warn(hcd->self.controller, "Could not get controller version\n");
return -ENODEV;
}
portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
switch (phy_mode) {
case FSL_USB2_PHY_ULPI:
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
setbits32(non_ehci + FSL_SOC_USB_CTRL,
ULPI_PHY_CLK_SEL);
/*
* Due to controller issue of PHY_CLK_VALID in ULPI
* mode, we set USB_CTRL_USB_EN before checking
* PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work.
*/
clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
UTMI_PHY_EN, USB_CTRL_USB_EN);
}
portsc |= PORT_PTS_ULPI;
break;
case FSL_USB2_PHY_SERIAL:
portsc |= PORT_PTS_SERIAL;
break;
case FSL_USB2_PHY_UTMI_WIDE:
portsc |= PORT_PTS_PTW;
/* fall through */
case FSL_USB2_PHY_UTMI:
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
become stable - 10ms*/
}
/* enable UTMI PHY */
USB: ehci-fsl: Fix kernel crash on mpc5121e Since commit 28c56ea1431421dec51b7b229369e991481453df (powerpc/usb: fix bug of kernel hang when initializing usb) the kernel crashes on mpc5121e. mpc5121e doesn't have system interface registers, accessing this register address space cause the machine check exception and a kernel crash: ... [ 1.294596] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.316491] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller [ 1.337334] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 [ 1.358548] Machine check in kernel mode. [ 1.375917] Caused by (from SRR1=49030): Transfer error ack signal [ 1.395505] Oops: Machine check, sig: 7 [#1] [ 1.413113] MPC5121 ADS [ 1.428718] Modules linked in: [ 1.444841] NIP: c026efc4 LR: c0278b50 CTR: 00000000 [ 1.463342] REGS: df837ba0 TRAP: 0200 Not tainted (3.3.0-08839-gb5174fa) [ 1.484083] MSR: 00049030 <EE,ME,IR,DR> CR: 42042022 XER: 20000000 [ 1.504099] TASK = df834000[1] 'swapper' THREAD: df836000 [ 1.509667] GPR00: 1c000000 df837c50 df834000 df9d74e0 00000003 00000010 00000000 00000000 [ 1.531650] GPR08: 00000020 00000000 c037cdd8 e1088000 22042028 1001a69c 00000000 00000000 [ 1.553762] GPR16: 1ffbce70 00000000 1fef5b28 1fef3e08 00000000 00000000 1ffcbc7c c045b264 [ 1.575824] GPR24: 0000008b 00000002 c04a7dd0 e1088000 df33c960 df9d74e0 00000000 df9d7400 [ 1.612295] NIP [c026efc4] ehci_fsl_setup_phy+0x110/0x124 [ 1.632454] LR [c0278b50] ehci_fsl_setup+0x29c/0x304 [ 1.652065] Call Trace: [ 1.668923] [df837c50] [c0278a40] ehci_fsl_setup+0x18c/0x304 (unreliable) [ 1.690332] [df837c70] [c025cba4] usb_add_hcd+0x1f0/0x66c [ 1.710377] [df837cb0] [c0277ab8] ehci_fsl_drv_probe+0x180/0x308 [ 1.731322] [df837ce0] [c01fc7a8] platform_drv_probe+0x20/0x30 [ 1.752202] [df837cf0] [c01fb0ac] driver_probe_device+0x8c/0x214 [ 1.773491] [df837d10] [c01f956c] bus_for_each_drv+0x6c/0xa8 [ 1.794279] [df837d40] [c01fafdc] device_attach+0xb4/0xd8 [ 1.814574] [df837d60] [c01fa44c] bus_probe_device+0xa4/0xb4 [ 1.835343] [df837d80] [c01f87a8] device_add+0x52c/0x5dc [ 1.855462] [df837dd0] [c01fcd58] platform_device_add+0x124/0x1d0 [ 1.876558] [df837df0] [c036dcec] fsl_usb2_device_register+0xa0/0xd4 [ 1.897512] [df837e10] [c036df28] fsl_usb2_mph_dr_of_probe+0x208/0x264 [ 1.918253] [df837e90] [c01fc7a8] platform_drv_probe+0x20/0x30 [ 1.938300] [df837ea0] [c01fb0ac] driver_probe_device+0x8c/0x214 [ 1.958511] [df837ec0] [c01fb2f0] __driver_attach+0xbc/0xc0 [ 1.978088] [df837ee0] [c01f9608] bus_for_each_dev+0x60/0x9c [ 1.997589] [df837f10] [c01fab88] driver_attach+0x24/0x34 [ 2.016757] [df837f20] [c01fa744] bus_add_driver+0x1ac/0x274 [ 2.036339] [df837f50] [c01fb898] driver_register+0x88/0x150 [ 2.056052] [df837f70] [c01fcabc] platform_driver_register+0x68/0x78 [ 2.076650] [df837f80] [c0446500] fsl_usb2_mph_dr_driver_init+0x18/0x28 [ 2.097734] [df837f90] [c0003988] do_one_initcall+0x148/0x1b0 [ 2.117934] [df837fc0] [c042d89c] kernel_init+0xfc/0x190 [ 2.137667] [df837ff0] [c000d2c4] kernel_thread+0x4c/0x68 [ 2.157240] Instruction dump: [ 2.174119] 90050004 4e800020 2f840003 419e0014 2f840004 409eff64 6400c000 4bffff5c [ 2.196000] 64001000 7c0004ac 812b0500 0c090000 <4c00012c> 61290200 7c0004ac 912b0500 [ 2.218100] ---[ end trace 21659aedb84ad816 ]--- [ 2.237089] [ 3.232940] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.232954] [ 3.271575] Rebooting in 1 seconds.. Check pdata->have_sysif_regs flag before accessing system interface registers. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 15:48:11 +07:00
if (pdata->have_sysif_regs)
setbits32(non_ehci + FSL_SOC_USB_CTRL,
CTRL_UTMI_PHY_EN);
portsc |= PORT_PTS_UTMI;
break;
case FSL_USB2_PHY_NONE:
break;
}
if (pdata->have_sysif_regs && pdata->controller_ver &&
(phy_mode == FSL_USB2_PHY_ULPI)) {
/* check PHY_CLK_VALID to get phy clk valid */
if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n");
return -EINVAL;
}
}
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
return 0;
}
static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
{
struct usb_hcd *hcd = ehci_to_hcd(ehci);
struct fsl_usb2_platform_data *pdata;
void __iomem *non_ehci = hcd->regs;
pdata = hcd->self.controller->platform_data;
if (pdata->have_sysif_regs) {
/*
* Turn on cache snooping hardware, since some PowerPC platforms
* wholly rely on hardware to deal with cache coherent
*/
/* Setup Snooping for all the 4GB space */
/* SNOOP1 starts from 0x0, size 2G */
out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
/* SNOOP2 starts from 0x80000000, size 2G */
out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
}
if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
(pdata->operating_mode == FSL_USB2_DR_OTG))
if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
return -EINVAL;
if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
unsigned int chip, rev, svr;
svr = mfspr(SPRN_SVR);
chip = svr >> 16;
rev = (svr >> 4) & 0xf;
/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
ehci->has_fsl_port_bug = 1;
if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
return -EINVAL;
if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
return -EINVAL;
}
if (pdata->have_sysif_regs) {
#ifdef CONFIG_FSL_SOC_BOOKE
out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080);
#else
out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
#endif
out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
}
return 0;
}
/* called after powerup, by probe or system-pm "wakeup" */
static int ehci_fsl_reinit(struct ehci_hcd *ehci)
{
if (ehci_fsl_usb_setup(ehci))
return -EINVAL;
return 0;
}
/* called during probe() after chip reset completes */
static int ehci_fsl_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
struct fsl_usb2_platform_data *pdata;
struct device *dev;
dev = hcd->self.controller;
pdata = hcd->self.controller->platform_data;
ehci->big_endian_desc = pdata->big_endian_desc;
ehci->big_endian_mmio = pdata->big_endian_mmio;
/* EHCI registers start at offset 0x100 */
ehci->caps = hcd->regs + 0x100;
#ifdef CONFIG_PPC_83xx
/*
* Deal with MPC834X that need port power to be cycled after the power
* fault condition is removed. Otherwise the state machine does not
* reflect PORTSC[CSC] correctly.
*/
ehci->need_oc_pp_cycle = 1;
#endif
hcd->has_tt = 1;
retval = ehci_setup(hcd);
if (retval)
return retval;
if (of_device_is_compatible(dev->parent->of_node,
"fsl,mpc5121-usb2-dr")) {
/*
* set SBUSCFG:AHBBRST so that control msgs don't
* fail when doing heavy PATA writes.
*/
ehci_writel(ehci, SBUSCFG_INCR8,
hcd->regs + FSL_SOC_USB_SBUSCFG);
}
retval = ehci_fsl_reinit(ehci);
return retval;
}
struct ehci_fsl {
struct ehci_hcd ehci;
#ifdef CONFIG_PM
/* Saved USB PHY settings, need to restore after deep sleep. */
u32 usb_ctrl;
#endif
};
#ifdef CONFIG_PM
#ifdef CONFIG_PPC_MPC512x
static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct fsl_usb2_platform_data *pdata = dev->platform_data;
u32 tmp;
#ifdef DEBUG
u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
mode &= USBMODE_CM_MASK;
tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */
dev_dbg(dev, "suspend=%d already_suspended=%d "
"mode=%d usbcmd %08x\n", pdata->suspended,
pdata->already_suspended, mode, tmp);
#endif
/*
* If the controller is already suspended, then this must be a
* PM suspend. Remember this fact, so that we will leave the
* controller suspended at PM resume time.
*/
if (pdata->suspended) {
dev_dbg(dev, "already suspended, leaving early\n");
pdata->already_suspended = 1;
return 0;
}
dev_dbg(dev, "suspending...\n");
ehci->rh_state = EHCI_RH_SUSPENDED;
dev->power.power_state = PMSG_SUSPEND;
/* ignore non-host interrupts */
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
/* stop the controller */
tmp = ehci_readl(ehci, &ehci->regs->command);
tmp &= ~CMD_RUN;
ehci_writel(ehci, tmp, &ehci->regs->command);
/* save EHCI registers */
pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
pdata->pm_command &= ~CMD_RUN;
pdata->pm_status = ehci_readl(ehci, &ehci->regs->status);
pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable);
pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index);
pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment);
pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list);
pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next);
pdata->pm_configured_flag =
ehci_readl(ehci, &ehci->regs->configured_flag);
pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
pdata->pm_usbgenctrl = ehci_readl(ehci,
hcd->regs + FSL_SOC_USB_USBGENCTRL);
/* clear the W1C bits */
pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
pdata->suspended = 1;
/* clear PP to cut power to the port */
tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
tmp &= ~PORT_POWER;
ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
return 0;
}
static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct fsl_usb2_platform_data *pdata = dev->platform_data;
u32 tmp;
dev_dbg(dev, "suspend=%d already_suspended=%d\n",
pdata->suspended, pdata->already_suspended);
/*
* If the controller was already suspended at suspend time,
* then don't resume it now.
*/
if (pdata->already_suspended) {
dev_dbg(dev, "already suspended, leaving early\n");
pdata->already_suspended = 0;
return 0;
}
if (!pdata->suspended) {
dev_dbg(dev, "not suspended, leaving early\n");
return 0;
}
pdata->suspended = 0;
dev_dbg(dev, "resuming...\n");
/* set host mode */
tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
ehci_writel(ehci, pdata->pm_usbgenctrl,
hcd->regs + FSL_SOC_USB_USBGENCTRL);
ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
/* restore EHCI registers */
ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
ehci_writel(ehci, pdata->pm_configured_flag,
&ehci->regs->configured_flag);
ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
ehci->rh_state = EHCI_RH_RUNNING;
dev->power.power_state = PMSG_ON;
tmp = ehci_readl(ehci, &ehci->regs->command);
tmp |= CMD_RUN;
ehci_writel(ehci, tmp, &ehci->regs->command);
usb_hcd_resume_root_hub(hcd);
return 0;
}
#else
static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
{
return 0;
}
static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
{
return 0;
}
#endif /* CONFIG_PPC_MPC512x */
static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
return container_of(ehci, struct ehci_fsl, ehci);
}
static int ehci_fsl_drv_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
void __iomem *non_ehci = hcd->regs;
if (of_device_is_compatible(dev->parent->of_node,
"fsl,mpc5121-usb2-dr")) {
return ehci_fsl_mpc512x_drv_suspend(dev);
}
ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
device_may_wakeup(dev));
if (!fsl_deep_sleep())
return 0;
ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL);
return 0;
}
static int ehci_fsl_drv_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
void __iomem *non_ehci = hcd->regs;
if (of_device_is_compatible(dev->parent->of_node,
"fsl,mpc5121-usb2-dr")) {
return ehci_fsl_mpc512x_drv_resume(dev);
}
ehci_prepare_ports_for_controller_resume(ehci);
if (!fsl_deep_sleep())
return 0;
usb_root_hub_lost_power(hcd->self.root_hub);
/* Restore USB PHY settings and enable the controller. */
out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl);
ehci_reset(ehci);
ehci_fsl_reinit(ehci);
return 0;
}
static int ehci_fsl_drv_restore(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
usb_root_hub_lost_power(hcd->self.root_hub);
return 0;
}
static struct dev_pm_ops ehci_fsl_pm_ops = {
.suspend = ehci_fsl_drv_suspend,
.resume = ehci_fsl_drv_resume,
.restore = ehci_fsl_drv_restore,
};
#define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops)
#else
#define EHCI_FSL_PM_OPS NULL
#endif /* CONFIG_PM */
#ifdef CONFIG_USB_OTG
static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
u32 status;
if (!port)
return -EINVAL;
port--;
/* start port reset before HNP protocol time out */
status = readl(&ehci->regs->port_status[port]);
if (!(status & PORT_CONNECT))
return -ENODEV;
/* khubd will finish the reset later */
if (ehci_is_TDI(ehci)) {
writel(PORT_RESET |
(status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
&ehci->regs->port_status[port]);
} else {
writel(PORT_RESET, &ehci->regs->port_status[port]);
}
return 0;
}
#else
#define ehci_start_port_reset NULL
#endif /* CONFIG_USB_OTG */
static const struct hc_driver ehci_fsl_hc_driver = {
.description = hcd_name,
.product_desc = "Freescale On-Chip EHCI Host Controller",
.hcd_priv_size = sizeof(struct ehci_fsl),
/*
* generic hardware linkage
*/
.irq = ehci_irq,
.flags = HCD_USB2 | HCD_MEMORY,
/*
* basic lifecycle operations
*/
.reset = ehci_fsl_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
*/
.get_frame_number = ehci_get_frame,
/*
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.start_port_reset = ehci_start_port_reset,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ehci_fsl_drv_probe(struct platform_device *pdev)
{
if (usb_disabled())
return -ENODEV;
/* FIXME we only want one one probe() not two */
return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
}
static int ehci_fsl_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
/* FIXME we only want one one remove() not two */
usb_hcd_fsl_remove(hcd, pdev);
return 0;
}
MODULE_ALIAS("platform:fsl-ehci");
static struct platform_driver ehci_fsl_driver = {
.probe = ehci_fsl_drv_probe,
.remove = ehci_fsl_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "fsl-ehci",
.pm = EHCI_FSL_PM_OPS,
},
};