linux_dsm_epyc7002/drivers/gpio/gpio-brcmstb.c

779 lines
20 KiB
C
Raw Normal View History

/*
* Copyright (C) 2015-2017 Broadcom
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/bitops.h>
#include <linux/gpio/driver.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/module.h>
2015-08-01 08:17:43 +07:00
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
enum gio_reg_index {
GIO_REG_ODEN = 0,
GIO_REG_DATA,
GIO_REG_IODIR,
GIO_REG_EC,
GIO_REG_EI,
GIO_REG_MASK,
GIO_REG_LEVEL,
GIO_REG_STAT,
NUMBER_OF_GIO_REGISTERS
};
#define GIO_BANK_SIZE (NUMBER_OF_GIO_REGISTERS * sizeof(u32))
#define GIO_BANK_OFF(bank, off) (((bank) * GIO_BANK_SIZE) + (off * sizeof(u32)))
#define GIO_ODEN(bank) GIO_BANK_OFF(bank, GIO_REG_ODEN)
#define GIO_DATA(bank) GIO_BANK_OFF(bank, GIO_REG_DATA)
#define GIO_IODIR(bank) GIO_BANK_OFF(bank, GIO_REG_IODIR)
#define GIO_EC(bank) GIO_BANK_OFF(bank, GIO_REG_EC)
#define GIO_EI(bank) GIO_BANK_OFF(bank, GIO_REG_EI)
#define GIO_MASK(bank) GIO_BANK_OFF(bank, GIO_REG_MASK)
#define GIO_LEVEL(bank) GIO_BANK_OFF(bank, GIO_REG_LEVEL)
#define GIO_STAT(bank) GIO_BANK_OFF(bank, GIO_REG_STAT)
struct brcmstb_gpio_bank {
struct list_head node;
int id;
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
struct gpio_chip gc;
struct brcmstb_gpio_priv *parent_priv;
u32 width;
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
u32 wake_active;
u32 saved_regs[GIO_REG_STAT]; /* Don't save and restore GIO_REG_STAT */
};
struct brcmstb_gpio_priv {
struct list_head bank_list;
void __iomem *reg_base;
struct platform_device *pdev;
struct irq_domain *irq_domain;
struct irq_chip irq_chip;
2015-08-01 08:17:43 +07:00
int parent_irq;
int gpio_base;
int num_gpios;
2015-08-01 08:17:43 +07:00
int parent_wake_irq;
};
#define MAX_GPIO_PER_BANK 32
#define GPIO_BANK(gpio) ((gpio) >> 5)
/* assumes MAX_GPIO_PER_BANK is a multiple of 2 */
#define GPIO_BIT(gpio) ((gpio) & (MAX_GPIO_PER_BANK - 1))
static inline struct brcmstb_gpio_priv *
brcmstb_gpio_gc_to_priv(struct gpio_chip *gc)
{
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
return bank->parent_priv;
}
static unsigned long
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
__brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank)
{
void __iomem *reg_base = bank->parent_priv->reg_base;
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
return bank->gc.read_reg(reg_base + GIO_STAT(bank->id)) &
bank->gc.read_reg(reg_base + GIO_MASK(bank->id));
}
static unsigned long
brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank)
{
unsigned long status;
unsigned long flags;
spin_lock_irqsave(&bank->gc.bgpio_lock, flags);
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
status = __brcmstb_gpio_get_active_irqs(bank);
spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags);
return status;
}
static int brcmstb_gpio_hwirq_to_offset(irq_hw_number_t hwirq,
struct brcmstb_gpio_bank *bank)
{
return hwirq - (bank->gc.base - bank->parent_priv->gpio_base);
}
2015-08-01 08:17:43 +07:00
static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank,
unsigned int hwirq, bool enable)
2015-08-01 08:17:43 +07:00
{
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
struct gpio_chip *gc = &bank->gc;
2015-08-01 08:17:43 +07:00
struct brcmstb_gpio_priv *priv = bank->parent_priv;
u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(hwirq, bank));
2015-08-01 08:17:43 +07:00
u32 imask;
unsigned long flags;
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
spin_lock_irqsave(&gc->bgpio_lock, flags);
imask = gc->read_reg(priv->reg_base + GIO_MASK(bank->id));
2015-08-01 08:17:43 +07:00
if (enable)
imask |= mask;
2015-08-01 08:17:43 +07:00
else
imask &= ~mask;
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
gc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask);
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
2015-08-01 08:17:43 +07:00
}
static int brcmstb_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
/* gc_offset is relative to this gpio_chip; want real offset */
int hwirq = offset + (gc->base - priv->gpio_base);
if (hwirq >= priv->num_gpios)
return -ENXIO;
return irq_create_mapping(priv->irq_domain, hwirq);
}
2015-08-01 08:17:43 +07:00
/* -------------------- IRQ chip functions -------------------- */
static void brcmstb_gpio_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
2015-08-01 08:17:43 +07:00
brcmstb_gpio_set_imask(bank, d->hwirq, false);
}
static void brcmstb_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
2015-08-01 08:17:43 +07:00
brcmstb_gpio_set_imask(bank, d->hwirq, true);
}
static void brcmstb_gpio_irq_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
struct brcmstb_gpio_priv *priv = bank->parent_priv;
u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank));
gc->write_reg(priv->reg_base + GIO_STAT(bank->id), mask);
}
2015-08-01 08:17:43 +07:00
static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
2015-08-01 08:17:43 +07:00
struct brcmstb_gpio_priv *priv = bank->parent_priv;
u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank));
2015-08-01 08:17:43 +07:00
u32 edge_insensitive, iedge_insensitive;
u32 edge_config, iedge_config;
u32 level, ilevel;
unsigned long flags;
switch (type) {
case IRQ_TYPE_LEVEL_LOW:
level = mask;
2015-08-01 08:17:43 +07:00
edge_config = 0;
edge_insensitive = 0;
break;
case IRQ_TYPE_LEVEL_HIGH:
level = mask;
edge_config = mask;
2015-08-01 08:17:43 +07:00
edge_insensitive = 0;
break;
case IRQ_TYPE_EDGE_FALLING:
level = 0;
edge_config = 0;
edge_insensitive = 0;
break;
case IRQ_TYPE_EDGE_RISING:
level = 0;
edge_config = mask;
edge_insensitive = 0;
break;
case IRQ_TYPE_EDGE_BOTH:
level = 0;
edge_config = 0; /* don't care, but want known value */
edge_insensitive = mask;
break;
default:
return -EINVAL;
}
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
spin_lock_irqsave(&bank->gc.bgpio_lock, flags);
2015-08-01 08:17:43 +07:00
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
iedge_config = bank->gc.read_reg(priv->reg_base +
2015-08-01 08:17:43 +07:00
GIO_EC(bank->id)) & ~mask;
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
iedge_insensitive = bank->gc.read_reg(priv->reg_base +
2015-08-01 08:17:43 +07:00
GIO_EI(bank->id)) & ~mask;
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
ilevel = bank->gc.read_reg(priv->reg_base +
2015-08-01 08:17:43 +07:00
GIO_LEVEL(bank->id)) & ~mask;
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
bank->gc.write_reg(priv->reg_base + GIO_EC(bank->id),
2015-08-01 08:17:43 +07:00
iedge_config | edge_config);
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
bank->gc.write_reg(priv->reg_base + GIO_EI(bank->id),
2015-08-01 08:17:43 +07:00
iedge_insensitive | edge_insensitive);
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
bank->gc.write_reg(priv->reg_base + GIO_LEVEL(bank->id),
2015-08-01 08:17:43 +07:00
ilevel | level);
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags);
2015-08-01 08:17:43 +07:00
return 0;
}
static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv,
unsigned int enable)
2015-08-01 08:17:43 +07:00
{
int ret = 0;
if (enable)
ret = enable_irq_wake(priv->parent_wake_irq);
else
ret = disable_irq_wake(priv->parent_wake_irq);
if (ret)
dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n",
enable ? "enable" : "disable");
return ret;
}
static int brcmstb_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
struct brcmstb_gpio_priv *priv = bank->parent_priv;
u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank));
/*
* Do not do anything specific for now, suspend/resume callbacks will
* configure the interrupt mask appropriately
*/
if (enable)
bank->wake_active |= mask;
else
bank->wake_active &= ~mask;
return brcmstb_gpio_priv_set_wake(priv, enable);
}
2015-08-01 08:17:43 +07:00
static irqreturn_t brcmstb_gpio_wake_irq_handler(int irq, void *data)
{
struct brcmstb_gpio_priv *priv = data;
if (!priv || irq != priv->parent_wake_irq)
return IRQ_NONE;
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
/* Nothing to do */
2015-08-01 08:17:43 +07:00
return IRQ_HANDLED;
}
static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
{
struct brcmstb_gpio_priv *priv = bank->parent_priv;
struct irq_domain *domain = priv->irq_domain;
int hwbase = bank->gc.base - priv->gpio_base;
2015-08-01 08:17:43 +07:00
unsigned long status;
while ((status = brcmstb_gpio_get_active_irqs(bank))) {
unsigned int irq, offset;
2015-08-01 08:17:43 +07:00
for_each_set_bit(offset, &status, 32) {
if (offset >= bank->width)
2015-08-01 08:17:43 +07:00
dev_warn(&priv->pdev->dev,
"IRQ for invalid GPIO (bank=%d, offset=%d)\n",
bank->id, offset);
irq = irq_linear_revmap(domain, hwbase + offset);
generic_handle_irq(irq);
2015-08-01 08:17:43 +07:00
}
}
}
/* Each UPG GIO block has one IRQ for all banks */
static void brcmstb_gpio_irq_handler(struct irq_desc *desc)
2015-08-01 08:17:43 +07:00
{
struct brcmstb_gpio_priv *priv = irq_desc_get_handler_data(desc);
2015-08-01 08:17:43 +07:00
struct irq_chip *chip = irq_desc_get_chip(desc);
struct brcmstb_gpio_bank *bank;
2015-08-01 08:17:43 +07:00
/* Interrupts weren't properly cleared during probe */
BUG_ON(!priv || !chip);
chained_irq_enter(chip, desc);
list_for_each_entry(bank, &priv->bank_list, node)
2015-08-01 08:17:43 +07:00
brcmstb_gpio_irq_bank_handler(bank);
chained_irq_exit(chip, desc);
}
static struct brcmstb_gpio_bank *brcmstb_gpio_hwirq_to_bank(
struct brcmstb_gpio_priv *priv, irq_hw_number_t hwirq)
{
struct brcmstb_gpio_bank *bank;
int i = 0;
/* banks are in descending order */
list_for_each_entry_reverse(bank, &priv->bank_list, node) {
i += bank->gc.ngpio;
if (hwirq < i)
return bank;
}
return NULL;
}
/*
* This lock class tells lockdep that GPIO irqs are in a different
* category than their parents, so it won't report false recursion.
*/
static struct lock_class_key brcmstb_gpio_irq_lock_class;
static struct lock_class_key brcmstb_gpio_irq_request_class;
static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct brcmstb_gpio_priv *priv = d->host_data;
struct brcmstb_gpio_bank *bank =
brcmstb_gpio_hwirq_to_bank(priv, hwirq);
struct platform_device *pdev = priv->pdev;
int ret;
if (!bank)
return -EINVAL;
dev_dbg(&pdev->dev, "Mapping irq %d for gpio line %d (bank %d)\n",
irq, (int)hwirq, bank->id);
ret = irq_set_chip_data(irq, &bank->gc);
if (ret < 0)
return ret;
irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class,
&brcmstb_gpio_irq_lock_class);
irq_set_chip_and_handler(irq, &priv->irq_chip, handle_level_irq);
irq_set_noprobe(irq);
return 0;
}
static void brcmstb_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
{
irq_set_chip_and_handler(irq, NULL, NULL);
irq_set_chip_data(irq, NULL);
}
static const struct irq_domain_ops brcmstb_gpio_irq_domain_ops = {
.map = brcmstb_gpio_irq_map,
.unmap = brcmstb_gpio_irq_unmap,
.xlate = irq_domain_xlate_twocell,
};
/* Make sure that the number of banks matches up between properties */
static int brcmstb_gpio_sanity_check_banks(struct device *dev,
struct device_node *np, struct resource *res)
{
int res_num_banks = resource_size(res) / GIO_BANK_SIZE;
int num_banks =
of_property_count_u32_elems(np, "brcm,gpio-bank-widths");
if (res_num_banks != num_banks) {
dev_err(dev, "Mismatch in banks: res had %d, bank-widths had %d\n",
res_num_banks, num_banks);
return -EINVAL;
} else {
return 0;
}
}
static int brcmstb_gpio_remove(struct platform_device *pdev)
{
struct brcmstb_gpio_priv *priv = platform_get_drvdata(pdev);
struct brcmstb_gpio_bank *bank;
int offset, ret = 0, virq;
if (!priv) {
dev_err(&pdev->dev, "called %s without drvdata!\n", __func__);
return -EFAULT;
}
if (priv->parent_irq > 0)
irq_set_chained_handler_and_data(priv->parent_irq, NULL, NULL);
/* Remove all IRQ mappings and delete the domain */
if (priv->irq_domain) {
for (offset = 0; offset < priv->num_gpios; offset++) {
virq = irq_find_mapping(priv->irq_domain, offset);
irq_dispose_mapping(virq);
}
irq_domain_remove(priv->irq_domain);
}
/*
* You can lose return values below, but we report all errors, and it's
* more important to actually perform all of the steps.
*/
list_for_each_entry(bank, &priv->bank_list, node)
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
gpiochip_remove(&bank->gc);
return ret;
}
static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
const struct of_phandle_args *gpiospec, u32 *flags)
{
struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
int offset;
if (gc->of_gpio_n_cells != 2) {
WARN_ON(1);
return -EINVAL;
}
if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
return -EINVAL;
offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
2015-08-01 08:17:43 +07:00
if (offset >= gc->ngpio || offset < 0)
return -EINVAL;
if (unlikely(offset >= bank->width)) {
dev_warn_ratelimited(&priv->pdev->dev,
"Received request for invalid GPIO offset %d\n",
gpiospec->args[0]);
}
if (flags)
*flags = gpiospec->args[1];
return offset;
}
/* priv->parent_irq and priv->num_gpios must be set before calling */
2015-08-01 08:17:43 +07:00
static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
struct brcmstb_gpio_priv *priv)
2015-08-01 08:17:43 +07:00
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
int err;
2015-08-01 08:17:43 +07:00
priv->irq_domain =
irq_domain_add_linear(np, priv->num_gpios,
&brcmstb_gpio_irq_domain_ops,
priv);
if (!priv->irq_domain) {
dev_err(dev, "Couldn't allocate IRQ domain\n");
return -ENXIO;
}
2015-08-01 08:17:43 +07:00
if (of_property_read_bool(np, "wakeup-source")) {
2015-08-01 08:17:43 +07:00
priv->parent_wake_irq = platform_get_irq(pdev, 1);
if (priv->parent_wake_irq < 0) {
priv->parent_wake_irq = 0;
2015-08-01 08:17:43 +07:00
dev_warn(dev,
"Couldn't get wake IRQ - GPIOs will not be able to wake from sleep");
} else {
/*
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
* Set wakeup capability so we can process boot-time
* "wakeups" (e.g., from S5 cold boot)
*/
device_set_wakeup_capable(dev, true);
device_wakeup_enable(dev);
err = devm_request_irq(dev, priv->parent_wake_irq,
brcmstb_gpio_wake_irq_handler,
IRQF_SHARED,
"brcmstb-gpio-wake", priv);
2015-08-01 08:17:43 +07:00
if (err < 0) {
dev_err(dev, "Couldn't request wake IRQ");
goto out_free_domain;
2015-08-01 08:17:43 +07:00
}
}
}
priv->irq_chip.name = dev_name(dev);
priv->irq_chip.irq_disable = brcmstb_gpio_irq_mask;
priv->irq_chip.irq_mask = brcmstb_gpio_irq_mask;
priv->irq_chip.irq_unmask = brcmstb_gpio_irq_unmask;
priv->irq_chip.irq_ack = brcmstb_gpio_irq_ack;
priv->irq_chip.irq_set_type = brcmstb_gpio_irq_set_type;
if (priv->parent_wake_irq)
priv->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake;
2015-08-01 08:17:43 +07:00
irq_set_chained_handler_and_data(priv->parent_irq,
brcmstb_gpio_irq_handler, priv);
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
irq_set_status_flags(priv->parent_irq, IRQ_DISABLE_UNLAZY);
2015-08-01 08:17:43 +07:00
return 0;
out_free_domain:
irq_domain_remove(priv->irq_domain);
return err;
2015-08-01 08:17:43 +07:00
}
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
static void brcmstb_gpio_bank_save(struct brcmstb_gpio_priv *priv,
struct brcmstb_gpio_bank *bank)
{
struct gpio_chip *gc = &bank->gc;
unsigned int i;
for (i = 0; i < GIO_REG_STAT; i++)
bank->saved_regs[i] = gc->read_reg(priv->reg_base +
GIO_BANK_OFF(bank->id, i));
}
static void brcmstb_gpio_quiesce(struct device *dev, bool save)
{
struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev);
struct brcmstb_gpio_bank *bank;
struct gpio_chip *gc;
u32 imask;
/* disable non-wake interrupt */
if (priv->parent_irq >= 0)
disable_irq(priv->parent_irq);
list_for_each_entry(bank, &priv->bank_list, node) {
gc = &bank->gc;
if (save)
brcmstb_gpio_bank_save(priv, bank);
/* Unmask GPIOs which have been flagged as wake-up sources */
if (priv->parent_wake_irq)
imask = bank->wake_active;
else
imask = 0;
gc->write_reg(priv->reg_base + GIO_MASK(bank->id),
imask);
}
}
static void brcmstb_gpio_shutdown(struct platform_device *pdev)
{
/* Enable GPIO for S5 cold boot */
brcmstb_gpio_quiesce(&pdev->dev, false);
}
#ifdef CONFIG_PM_SLEEP
static void brcmstb_gpio_bank_restore(struct brcmstb_gpio_priv *priv,
struct brcmstb_gpio_bank *bank)
{
struct gpio_chip *gc = &bank->gc;
unsigned int i;
for (i = 0; i < GIO_REG_STAT; i++)
gc->write_reg(priv->reg_base + GIO_BANK_OFF(bank->id, i),
bank->saved_regs[i]);
}
static int brcmstb_gpio_suspend(struct device *dev)
{
brcmstb_gpio_quiesce(dev, true);
return 0;
}
static int brcmstb_gpio_resume(struct device *dev)
{
struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev);
struct brcmstb_gpio_bank *bank;
bool need_wakeup_event = false;
list_for_each_entry(bank, &priv->bank_list, node) {
need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank);
brcmstb_gpio_bank_restore(priv, bank);
}
if (priv->parent_wake_irq && need_wakeup_event)
pm_wakeup_event(dev, 0);
/* enable non-wake interrupt */
if (priv->parent_irq >= 0)
enable_irq(priv->parent_irq);
return 0;
}
#else
#define brcmstb_gpio_suspend NULL
#define brcmstb_gpio_resume NULL
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops brcmstb_gpio_pm_ops = {
.suspend_noirq = brcmstb_gpio_suspend,
.resume_noirq = brcmstb_gpio_resume,
};
static int brcmstb_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
void __iomem *reg_base;
struct brcmstb_gpio_priv *priv;
struct resource *res;
struct property *prop;
const __be32 *p;
u32 bank_width;
2015-08-01 08:17:43 +07:00
int num_banks = 0;
int err;
static int gpio_base;
unsigned long flags = 0;
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
bool need_wakeup_event = false;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
platform_set_drvdata(pdev, priv);
INIT_LIST_HEAD(&priv->bank_list);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg_base = devm_ioremap_resource(dev, res);
if (IS_ERR(reg_base))
return PTR_ERR(reg_base);
priv->gpio_base = gpio_base;
priv->reg_base = reg_base;
priv->pdev = pdev;
2015-08-01 08:17:43 +07:00
if (of_property_read_bool(np, "interrupt-controller")) {
priv->parent_irq = platform_get_irq(pdev, 0);
if (priv->parent_irq <= 0) {
dev_err(dev, "Couldn't get IRQ");
return -ENOENT;
}
} else {
priv->parent_irq = -ENOENT;
}
if (brcmstb_gpio_sanity_check_banks(dev, np, res))
return -EINVAL;
/*
* MIPS endianness is configured by boot strap, which also reverses all
* bus endianness (i.e., big-endian CPU + big endian bus ==> native
* endian I/O).
*
* Other architectures (e.g., ARM) either do not support big endian, or
* else leave I/O in little endian mode.
*/
#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
#endif
of_property_for_each_u32(np, "brcm,gpio-bank-widths", prop, p,
bank_width) {
struct brcmstb_gpio_bank *bank;
struct gpio_chip *gc;
bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
if (!bank) {
err = -ENOMEM;
goto fail;
}
bank->parent_priv = priv;
2015-08-01 08:17:43 +07:00
bank->id = num_banks;
if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) {
dev_err(dev, "Invalid bank width %d\n", bank_width);
err = -EINVAL;
goto fail;
} else {
bank->width = bank_width;
}
/*
* Regs are 4 bytes wide, have data reg, no set/clear regs,
* and direction bits have 0 = output and 1 = input
*/
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
gc = &bank->gc;
err = bgpio_init(gc, dev, 4,
reg_base + GIO_DATA(bank->id),
NULL, NULL, NULL,
reg_base + GIO_IODIR(bank->id), flags);
if (err) {
dev_err(dev, "bgpio_init() failed\n");
goto fail;
}
gc->of_node = np;
gc->owner = THIS_MODULE;
gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pOF", dev->of_node);
if (!gc->label) {
err = -ENOMEM;
goto fail;
}
gc->base = gpio_base;
gc->of_gpio_n_cells = 2;
gc->of_xlate = brcmstb_gpio_of_xlate;
/* not all ngpio lines are valid, will use bank width later */
gc->ngpio = MAX_GPIO_PER_BANK;
if (priv->parent_irq > 0)
gc->to_irq = brcmstb_gpio_to_irq;
/*
* Mask all interrupts by default, since wakeup interrupts may
* be retained from S5 cold boot
*/
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank);
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
gc->write_reg(reg_base + GIO_MASK(bank->id), 0);
gpio: generic: factor into gpio_chip struct The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-04 20:02:58 +07:00
err = gpiochip_add_data(gc, bank);
if (err) {
dev_err(dev, "Could not add gpiochip for bank %d\n",
bank->id);
goto fail;
}
gpio_base += gc->ngpio;
2015-08-01 08:17:43 +07:00
dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
gc->base, gc->ngpio, bank->width);
/* Everything looks good, so add bank to list */
list_add(&bank->node, &priv->bank_list);
2015-08-01 08:17:43 +07:00
num_banks++;
}
priv->num_gpios = gpio_base - priv->gpio_base;
if (priv->parent_irq > 0) {
err = brcmstb_gpio_irq_setup(pdev, priv);
if (err)
goto fail;
}
dev_info(dev, "Registered %d banks (GPIO(s): %d-%d)\n",
2015-08-01 08:17:43 +07:00
num_banks, priv->gpio_base, gpio_base - 1);
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
if (priv->parent_wake_irq && need_wakeup_event)
pm_wakeup_event(dev, 0);
return 0;
fail:
(void) brcmstb_gpio_remove(pdev);
return err;
}
static const struct of_device_id brcmstb_gpio_of_match[] = {
{ .compatible = "brcm,brcmstb-gpio" },
{},
};
MODULE_DEVICE_TABLE(of, brcmstb_gpio_of_match);
static struct platform_driver brcmstb_gpio_driver = {
.driver = {
.name = "brcmstb-gpio",
.of_match_table = brcmstb_gpio_of_match,
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
.pm = &brcmstb_gpio_pm_ops,
},
.probe = brcmstb_gpio_probe,
.remove = brcmstb_gpio_remove,
gpio: brcmstb: implement suspend/resume/shutdown This commit corrects problems with the previous wake implementation by implementing suspend and resume power management operations and the driver shutdown operation. Wake masks are used to keep track of which GPIO should wake the device. On suspend the GPIO state is saved and the possible wakeup sources are explicitly unmasked in the hardware. Non-wakeup sources are explicitly masked so IRQCHIP_MASK_ON_SUSPEND is no longer necessary. The saved state of the GPIO is restored upon resume. It is important not to write to the GPIO status register since this has the effect of clearing bits. The status register is explicitly removed from the register save and restore to ensure this. The shutdown operation allows the hardware to be put into the same quiesced state as the suspend operation and removes the need for the reboot notifier. Unfortunately, there appears to be some confusion about whether a pending disabled wake interrupt should wake the system. If a wake capable interrupt is disabled using the default "lazy disable" behavior and it is triggered before the suspend_device_irq call the interrupt hardware will be acknowledged by mask_ack_irq and the IRQS_PENDING flag is added to its state. However, the IRQS_PENDING flag of wake interrupts is not checked to prevent the transition to suspend and the hardware has been acked which prevents its wakeup. If the lazy disabled interrupt is triggered after the call to suspend_device_irqs then the wakeup logic will abort the suspend. The irq_disable method is defined by this GPIO driver to prevent lazy disable so that the pending hardware state remains asserted allowing the hardware to wake and providing a consistent behavior. In addition, the IRQ_DISABLE_UNLAZY flag is set for the non-wake parent interrupt as a convenience to prevent the need to add code to the brcmstb_gpio_irq_handler to support "lazy disable" of the non-wake parent interrupt when it is disabled during suspend and resume. Chained interrupt parents are not normally disabled, but these GPIO devices have different parent interrupts for wake and non-wake handling. It is convenient to mask the non-wake parent when suspending to preserve the hardware state for proper wakeup accounting when the driver is resumed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25 02:54:51 +07:00
.shutdown = brcmstb_gpio_shutdown,
};
module_platform_driver(brcmstb_gpio_driver);
MODULE_AUTHOR("Gregory Fong");
MODULE_DESCRIPTION("Driver for Broadcom BRCMSTB SoC UPG GPIO");
MODULE_LICENSE("GPL v2");