linux_dsm_epyc7002/arch/sparc/include/asm/iommu_32.h

122 lines
5.6 KiB
C
Raw Normal View History

sparc: join the remaining header files With this commit all sparc64 header files are moved to asm-sparc. The remaining files (71 files) were too different to be trivially merged so divide them up in a _32.h and a _64.h file which are both included from the file with no bit size. The following script were used: cd include FILES=`wc -l asm-sparc64/*h | grep -v '^ 1' | cut -b 20-` for FILE in ${FILES}; do echo $FILE: BASE=`echo $FILE | cut -d '.' -f 1` FN32=${BASE}_32.h FN64=${BASE}_64.h GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H git mv asm-sparc/$FILE asm-sparc/$FN32 git mv asm-sparc64/$FILE asm-sparc/$FN64 echo git mv done printf "#ifndef %s\n" $GUARD > asm-sparc/$FILE printf "#define %s\n" $GUARD >> asm-sparc/$FILE printf "#if defined(__sparc__) && defined(__arch64__)\n" >> asm-sparc/$FILE printf "#include <asm-sparc/%s>\n" $FN64 >> asm-sparc/$FILE printf "#else\n" >> asm-sparc/$FILE printf "#include <asm-sparc/%s>\n" $FN32 >> asm-sparc/$FILE printf "#endif\n" >> asm-sparc/$FILE printf "#endif\n" >> asm-sparc/$FILE git add asm-sparc/$FILE echo new file done printf "#include <asm-sparc/%s>\n" $FILE > asm-sparc64/$FILE git add asm-sparc64/$FILE echo sparc64 file done done The guard contains three '_' to avoid conflict with existing guards. In additing the two Kbuild files are emptied to avoid breaking headers_* targets. We will reintroduce the exported header files when the necessary kbuild changes are merged. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-18 11:55:51 +07:00
/* iommu.h: Definitions for the sun4m IOMMU.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
*/
#ifndef _SPARC_IOMMU_H
#define _SPARC_IOMMU_H
#include <asm/page.h>
#include <asm/bitext.h>
/* The iommu handles all virtual to physical address translations
* that occur between the SBUS and physical memory. Access by
* the cpu to IO registers and similar go over the mbus so are
* translated by the on chip SRMMU. The iommu and the srmmu do
* not need to have the same translations at all, in fact most
* of the time the translations they handle are a disjunct set.
* Basically the iommu handles all dvma sbus activity.
*/
/* The IOMMU registers occupy three pages in IO space. */
struct iommu_regs {
/* First page */
volatile unsigned long control; /* IOMMU control */
volatile unsigned long base; /* Physical base of iopte page table */
volatile unsigned long _unused1[3];
volatile unsigned long tlbflush; /* write only */
volatile unsigned long pageflush; /* write only */
volatile unsigned long _unused2[1017];
/* Second page */
volatile unsigned long afsr; /* Async-fault status register */
volatile unsigned long afar; /* Async-fault physical address */
volatile unsigned long _unused3[2];
volatile unsigned long sbuscfg0; /* SBUS configuration registers, per-slot */
volatile unsigned long sbuscfg1;
volatile unsigned long sbuscfg2;
volatile unsigned long sbuscfg3;
volatile unsigned long mfsr; /* Memory-fault status register */
volatile unsigned long mfar; /* Memory-fault physical address */
volatile unsigned long _unused4[1014];
/* Third page */
volatile unsigned long mid; /* IOMMU module-id */
};
#define IOMMU_CTRL_IMPL 0xf0000000 /* Implementation */
#define IOMMU_CTRL_VERS 0x0f000000 /* Version */
#define IOMMU_CTRL_RNGE 0x0000001c /* Mapping RANGE */
#define IOMMU_RNGE_16MB 0x00000000 /* 0xff000000 -> 0xffffffff */
#define IOMMU_RNGE_32MB 0x00000004 /* 0xfe000000 -> 0xffffffff */
#define IOMMU_RNGE_64MB 0x00000008 /* 0xfc000000 -> 0xffffffff */
#define IOMMU_RNGE_128MB 0x0000000c /* 0xf8000000 -> 0xffffffff */
#define IOMMU_RNGE_256MB 0x00000010 /* 0xf0000000 -> 0xffffffff */
#define IOMMU_RNGE_512MB 0x00000014 /* 0xe0000000 -> 0xffffffff */
#define IOMMU_RNGE_1GB 0x00000018 /* 0xc0000000 -> 0xffffffff */
#define IOMMU_RNGE_2GB 0x0000001c /* 0x80000000 -> 0xffffffff */
#define IOMMU_CTRL_ENAB 0x00000001 /* IOMMU Enable */
#define IOMMU_AFSR_ERR 0x80000000 /* LE, TO, or BE asserted */
#define IOMMU_AFSR_LE 0x40000000 /* SBUS reports error after transaction */
#define IOMMU_AFSR_TO 0x20000000 /* Write access took more than 12.8 us. */
#define IOMMU_AFSR_BE 0x10000000 /* Write access received error acknowledge */
#define IOMMU_AFSR_SIZE 0x0e000000 /* Size of transaction causing error */
#define IOMMU_AFSR_S 0x01000000 /* Sparc was in supervisor mode */
#define IOMMU_AFSR_RESV 0x00f00000 /* Reserver, forced to 0x8 by hardware */
#define IOMMU_AFSR_ME 0x00080000 /* Multiple errors occurred */
#define IOMMU_AFSR_RD 0x00040000 /* A read operation was in progress */
#define IOMMU_AFSR_FAV 0x00020000 /* IOMMU afar has valid contents */
#define IOMMU_SBCFG_SAB30 0x00010000 /* Phys-address bit 30 when bypass enabled */
#define IOMMU_SBCFG_BA16 0x00000004 /* Slave supports 16 byte bursts */
#define IOMMU_SBCFG_BA8 0x00000002 /* Slave supports 8 byte bursts */
#define IOMMU_SBCFG_BYPASS 0x00000001 /* Bypass IOMMU, treat all addresses
produced by this device as pure
physical. */
#define IOMMU_MFSR_ERR 0x80000000 /* One or more of PERR1 or PERR0 */
#define IOMMU_MFSR_S 0x01000000 /* Sparc was in supervisor mode */
#define IOMMU_MFSR_CPU 0x00800000 /* CPU transaction caused parity error */
#define IOMMU_MFSR_ME 0x00080000 /* Multiple parity errors occurred */
#define IOMMU_MFSR_PERR 0x00006000 /* high bit indicates parity error occurred
on the even word of the access, low bit
indicated odd word caused the parity error */
#define IOMMU_MFSR_BM 0x00001000 /* Error occurred while in boot mode */
#define IOMMU_MFSR_C 0x00000800 /* Address causing error was marked cacheable */
#define IOMMU_MFSR_RTYP 0x000000f0 /* Memory request transaction type */
#define IOMMU_MID_SBAE 0x001f0000 /* SBus arbitration enable */
#define IOMMU_MID_SE 0x00100000 /* Enables SCSI/ETHERNET arbitration */
#define IOMMU_MID_SB3 0x00080000 /* Enable SBUS device 3 arbitration */
#define IOMMU_MID_SB2 0x00040000 /* Enable SBUS device 2 arbitration */
#define IOMMU_MID_SB1 0x00020000 /* Enable SBUS device 1 arbitration */
#define IOMMU_MID_SB0 0x00010000 /* Enable SBUS device 0 arbitration */
#define IOMMU_MID_MID 0x0000000f /* Module-id, hardcoded to 0x8 */
/* The format of an iopte in the page tables */
#define IOPTE_PAGE 0x07ffff00 /* Physical page number (PA[30:12]) */
#define IOPTE_CACHE 0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */
#define IOPTE_WRITE 0x00000004 /* Writeable */
#define IOPTE_VALID 0x00000002 /* IOPTE is valid */
#define IOPTE_WAZ 0x00000001 /* Write as zeros */
struct iommu_struct {
struct iommu_regs *regs;
iopte_t *page_table;
/* For convenience */
unsigned long start; /* First managed virtual address */
unsigned long end; /* Last managed virtual address */
struct bit_map usemap;
};
static inline void iommu_invalidate(struct iommu_regs *regs)
{
regs->tlbflush = 0;
}
static inline void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba)
{
regs->pageflush = (ba & PAGE_MASK);
}
#endif /* !(_SPARC_IOMMU_H) */