AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-15 10:56:49 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
11199692d8
linux_dsm_epyc7002/arch/powerpc/kernel/idle_power7.S

126 lines
2.7 KiB
ArmAsm
Raw Normal View History

powerpc: Add NAP mode support on Power7 in HV mode Wakeup comes from the system reset handler with a potential loss of the non-hypervisor CPU state. We save the non-volatile state on the stack and a pointer to it in the PACA, which the system reset handler uses to restore things Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-24 14:42:41 +07:00
/*
powerpc: Rework lazy-interrupt handling The current implementation of lazy interrupts handling has some issues that this tries to address. We don't do the various workarounds we need to do when re-enabling interrupts in some cases such as when returning from an interrupt and thus we may still lose or get delayed decrementer or doorbell interrupts. The current scheme also makes it much harder to handle the external "edge" interrupts provided by some BookE processors when using the EPR facility (External Proxy) and the Freescale Hypervisor. Additionally, we tend to keep interrupts hard disabled in a number of cases, such as decrementer interrupts, external interrupts, or when a masked decrementer interrupt is pending. This is sub-optimal. This is an attempt at fixing it all in one go by reworking the way we do the lazy interrupt disabling from the ground up. The base idea is to replace the "hard_enabled" field with a "irq_happened" field in which we store a bit mask of what interrupt occurred while soft-disabled. When re-enabling, either via arch_local_irq_restore() or when returning from an interrupt, we can now decide what to do by testing bits in that field. We then implement replaying of the missed interrupts either by re-using the existing exception frame (in exception exit case) or via the creation of a new one from an assembly trampoline (in the arch_local_irq_enable case). This removes the need to play with the decrementer to try to create fake interrupts, among others. In addition, this adds a few refinements: - We no longer hard disable decrementer interrupts that occur while soft-disabled. We now simply bump the decrementer back to max (on BookS) or leave it stopped (on BookE) and continue with hard interrupts enabled, which means that we'll potentially get better sample quality from performance monitor interrupts. - Timer, decrementer and doorbell interrupts now hard-enable shortly after removing the source of the interrupt, which means they no longer run entirely hard disabled. Again, this will improve perf sample quality. - On Book3E 64-bit, we now make the performance monitor interrupt act as an NMI like Book3S (the necessary C code for that to work appear to already be present in the FSL perf code, notably calling nmi_enter instead of irq_enter). (This also fixes a bug where BookE perfmon interrupts could clobber r14 ... oops) - We could make "masked" decrementer interrupts act as NMIs when doing timer-based perf sampling to improve the sample quality. Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- v2: - Add hard-enable to decrementer, timer and doorbells - Fix CR clobber in masked irq handling on BookE - Make embedded perf interrupt act as an NMI - Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want to retrigger an interrupt without preventing hard-enable v3: - Fix or vs. ori bug on Book3E - Fix enabling of interrupts for some exceptions on Book3E v4: - Fix resend of doorbells on return from interrupt on Book3E v5: - Rebased on top of my latest series, which involves some significant rework of some aspects of the patch. v6: - 32-bit compile fix - more compile fixes with various .config combos - factor out the asm code to soft-disable interrupts - remove the C wrapper around preempt_schedule_irq v7: - Fix a bug with hard irq state tracking on native power7
2012-03-06 14:27:59 +07:00
* This file contains the power_save function for Power7 CPUs.
powerpc: Add NAP mode support on Power7 in HV mode Wakeup comes from the system reset handler with a potential loss of the non-hypervisor CPU state. We save the non-volatile state on the stack and a pointer to it in the PACA, which the system reset handler uses to restore things Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-24 14:42:41 +07:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/threads.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/ppc-opcode.h>
powerpc: Rework lazy-interrupt handling The current implementation of lazy interrupts handling has some issues that this tries to address. We don't do the various workarounds we need to do when re-enabling interrupts in some cases such as when returning from an interrupt and thus we may still lose or get delayed decrementer or doorbell interrupts. The current scheme also makes it much harder to handle the external "edge" interrupts provided by some BookE processors when using the EPR facility (External Proxy) and the Freescale Hypervisor. Additionally, we tend to keep interrupts hard disabled in a number of cases, such as decrementer interrupts, external interrupts, or when a masked decrementer interrupt is pending. This is sub-optimal. This is an attempt at fixing it all in one go by reworking the way we do the lazy interrupt disabling from the ground up. The base idea is to replace the "hard_enabled" field with a "irq_happened" field in which we store a bit mask of what interrupt occurred while soft-disabled. When re-enabling, either via arch_local_irq_restore() or when returning from an interrupt, we can now decide what to do by testing bits in that field. We then implement replaying of the missed interrupts either by re-using the existing exception frame (in exception exit case) or via the creation of a new one from an assembly trampoline (in the arch_local_irq_enable case). This removes the need to play with the decrementer to try to create fake interrupts, among others. In addition, this adds a few refinements: - We no longer hard disable decrementer interrupts that occur while soft-disabled. We now simply bump the decrementer back to max (on BookS) or leave it stopped (on BookE) and continue with hard interrupts enabled, which means that we'll potentially get better sample quality from performance monitor interrupts. - Timer, decrementer and doorbell interrupts now hard-enable shortly after removing the source of the interrupt, which means they no longer run entirely hard disabled. Again, this will improve perf sample quality. - On Book3E 64-bit, we now make the performance monitor interrupt act as an NMI like Book3S (the necessary C code for that to work appear to already be present in the FSL perf code, notably calling nmi_enter instead of irq_enter). (This also fixes a bug where BookE perfmon interrupts could clobber r14 ... oops) - We could make "masked" decrementer interrupts act as NMIs when doing timer-based perf sampling to improve the sample quality. Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- v2: - Add hard-enable to decrementer, timer and doorbells - Fix CR clobber in masked irq handling on BookE - Make embedded perf interrupt act as an NMI - Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want to retrigger an interrupt without preventing hard-enable v3: - Fix or vs. ori bug on Book3E - Fix enabling of interrupts for some exceptions on Book3E v4: - Fix resend of doorbells on return from interrupt on Book3E v5: - Rebased on top of my latest series, which involves some significant rework of some aspects of the patch. v6: - 32-bit compile fix - more compile fixes with various .config combos - factor out the asm code to soft-disable interrupts - remove the C wrapper around preempt_schedule_irq v7: - Fix a bug with hard irq state tracking on native power7
2012-03-06 14:27:59 +07:00
#include <asm/hw_irq.h>
KVM: PPC: Book3S HV: Make secondary threads more robust against stray IPIs Currently on POWER7, if we are running the guest on a core and we don't need all the hardware threads, we do nothing to ensure that the unused threads aren't executing in the kernel (other than checking that they are offline). We just assume they're napping and we don't do anything to stop them trying to enter the kernel while the guest is running. This means that a stray IPI can wake up the hardware thread and it will then try to enter the kernel, but since the core is in guest context, it will execute code from the guest in hypervisor mode once it turns the MMU on, which tends to lead to crashes or hangs in the host. This fixes the problem by adding two new one-byte flags in the kvmppc_host_state structure in the PACA which are used to interlock between the primary thread and the unused secondary threads when entering the guest. With these flags, the primary thread can ensure that the unused secondaries are not already in kernel mode (i.e. handling a stray IPI) and then indicate that they should not try to enter the kernel if they do get woken for any reason. Instead they will go into KVM code, find that there is no vcpu to run, acknowledge and clear the IPI and go back to nap mode. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-02-03 07:54:17 +07:00
#include <asm/kvm_book3s_asm.h>
powerpc: Add NAP mode support on Power7 in HV mode Wakeup comes from the system reset handler with a potential loss of the non-hypervisor CPU state. We save the non-volatile state on the stack and a pointer to it in the PACA, which the system reset handler uses to restore things Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-24 14:42:41 +07:00
#undef DEBUG
.text
_GLOBAL(power7_idle)
/* Now check if user or arch enabled NAP mode */
LOAD_REG_ADDRBASE(r3,powersave_nap)
lwz r4,ADDROFF(powersave_nap)(r3)
cmpwi 0,r4,0
beqlr
powerpc/powernv: Always go into nap mode when CPU is offline The CPU hotplug code for the powernv platform currently only puts offline CPUs into nap mode if the powersave_nap variable is set. However, HV-style KVM on this platform requires secondary CPU threads to be offline and in nap mode. Since we know nap mode works just fine on all POWER7 machines, and the only machines that support the powernv platform are POWER7 machines, this changes the code to always put offline CPUs into nap mode, regardless of powersave_nap. Powersave_nap still controls whether or not CPUs go into nap mode when idle, as before. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-27 01:51:09 +07:00
/* fall through */
powerpc: Add NAP mode support on Power7 in HV mode Wakeup comes from the system reset handler with a potential loss of the non-hypervisor CPU state. We save the non-volatile state on the stack and a pointer to it in the PACA, which the system reset handler uses to restore things Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-24 14:42:41 +07:00
powerpc/powernv: Always go into nap mode when CPU is offline The CPU hotplug code for the powernv platform currently only puts offline CPUs into nap mode if the powersave_nap variable is set. However, HV-style KVM on this platform requires secondary CPU threads to be offline and in nap mode. Since we know nap mode works just fine on all POWER7 machines, and the only machines that support the powernv platform are POWER7 machines, this changes the code to always put offline CPUs into nap mode, regardless of powersave_nap. Powersave_nap still controls whether or not CPUs go into nap mode when idle, as before. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-27 01:51:09 +07:00
_GLOBAL(power7_nap)
powerpc: Add NAP mode support on Power7 in HV mode Wakeup comes from the system reset handler with a potential loss of the non-hypervisor CPU state. We save the non-volatile state on the stack and a pointer to it in the PACA, which the system reset handler uses to restore things Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-24 14:42:41 +07:00
/* NAP is a state loss, we create a regs frame on the
* stack, fill it up with the state we care about and
* stick a pointer to it in PACAR1. We really only
* need to save PC, some CR bits and the NV GPRs,
* but for now an interrupt frame will do.
*/
mflr r0
std r0,16(r1)
stdu r1,-INT_FRAME_SIZE(r1)
std r0,_LINK(r1)
std r0,_NIP(r1)
#ifndef CONFIG_SMP
/* Make sure FPU, VSX etc... are flushed as we may lose
* state when going to nap mode
*/
bl .discard_lazy_cpu_state
#endif /* CONFIG_SMP */
/* Hard disable interrupts */
mfmsr r9
rldicl r9,r9,48,1
rotldi r9,r9,16
mtmsrd r9,1 /* hard-disable interrupts */
powerpc: Rework lazy-interrupt handling The current implementation of lazy interrupts handling has some issues that this tries to address. We don't do the various workarounds we need to do when re-enabling interrupts in some cases such as when returning from an interrupt and thus we may still lose or get delayed decrementer or doorbell interrupts. The current scheme also makes it much harder to handle the external "edge" interrupts provided by some BookE processors when using the EPR facility (External Proxy) and the Freescale Hypervisor. Additionally, we tend to keep interrupts hard disabled in a number of cases, such as decrementer interrupts, external interrupts, or when a masked decrementer interrupt is pending. This is sub-optimal. This is an attempt at fixing it all in one go by reworking the way we do the lazy interrupt disabling from the ground up. The base idea is to replace the "hard_enabled" field with a "irq_happened" field in which we store a bit mask of what interrupt occurred while soft-disabled. When re-enabling, either via arch_local_irq_restore() or when returning from an interrupt, we can now decide what to do by testing bits in that field. We then implement replaying of the missed interrupts either by re-using the existing exception frame (in exception exit case) or via the creation of a new one from an assembly trampoline (in the arch_local_irq_enable case). This removes the need to play with the decrementer to try to create fake interrupts, among others. In addition, this adds a few refinements: - We no longer hard disable decrementer interrupts that occur while soft-disabled. We now simply bump the decrementer back to max (on BookS) or leave it stopped (on BookE) and continue with hard interrupts enabled, which means that we'll potentially get better sample quality from performance monitor interrupts. - Timer, decrementer and doorbell interrupts now hard-enable shortly after removing the source of the interrupt, which means they no longer run entirely hard disabled. Again, this will improve perf sample quality. - On Book3E 64-bit, we now make the performance monitor interrupt act as an NMI like Book3S (the necessary C code for that to work appear to already be present in the FSL perf code, notably calling nmi_enter instead of irq_enter). (This also fixes a bug where BookE perfmon interrupts could clobber r14 ... oops) - We could make "masked" decrementer interrupts act as NMIs when doing timer-based perf sampling to improve the sample quality. Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- v2: - Add hard-enable to decrementer, timer and doorbells - Fix CR clobber in masked irq handling on BookE - Make embedded perf interrupt act as an NMI - Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want to retrigger an interrupt without preventing hard-enable v3: - Fix or vs. ori bug on Book3E - Fix enabling of interrupts for some exceptions on Book3E v4: - Fix resend of doorbells on return from interrupt on Book3E v5: - Rebased on top of my latest series, which involves some significant rework of some aspects of the patch. v6: - 32-bit compile fix - more compile fixes with various .config combos - factor out the asm code to soft-disable interrupts - remove the C wrapper around preempt_schedule_irq v7: - Fix a bug with hard irq state tracking on native power7
2012-03-06 14:27:59 +07:00
/* Check if something happened while soft-disabled */
lbz r0,PACAIRQHAPPENED(r13)
cmpwi cr0,r0,0
beq 1f
addi r1,r1,INT_FRAME_SIZE
ld r0,16(r1)
mtlr r0
blr
1: /* We mark irqs hard disabled as this is the state we'll
* be in when returning and we need to tell arch_local_irq_restore()
* about it
*/
li r0,PACA_IRQ_HARD_DIS
stb r0,PACAIRQHAPPENED(r13)
/* We haven't lost state ... yet */
powerpc: Add NAP mode support on Power7 in HV mode Wakeup comes from the system reset handler with a potential loss of the non-hypervisor CPU state. We save the non-volatile state on the stack and a pointer to it in the PACA, which the system reset handler uses to restore things Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-24 14:42:41 +07:00
li r0,0
powerpc: Provide a way for KVM to indicate that NV GPR values are lost This fixes a problem where a CPU thread coming out of nap mode can think it has valid values in the nonvolatile GPRs (r14 - r31) as saved away in power7_idle, but in fact the values have been trashed because the thread was used for KVM in the mean time. The result is that the thread crashes because code that called power7_idle (e.g., pnv_smp_cpu_kill_self()) goes to use values in registers that have been trashed. The bit field in SRR1 that tells whether state was lost only reflects the most recent nap, which may not have been the nap instruction in power7_idle. So we need an extra PACA field to indicate that state has been lost even if SRR1 indicates that the most recent nap didn't lose state. We clear this field when saving the state in power7_idle, we set it to a non-zero value when we use the thread for KVM, and we test it in power7_wakeup_noloss. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-06 02:47:26 +07:00
stb r0,PACA_NAPSTATELOST(r13)
powerpc: Add NAP mode support on Power7 in HV mode Wakeup comes from the system reset handler with a potential loss of the non-hypervisor CPU state. We save the non-volatile state on the stack and a pointer to it in the PACA, which the system reset handler uses to restore things Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-24 14:42:41 +07:00
/* Continue saving state */
SAVE_GPR(2, r1)
SAVE_NVGPRS(r1)
mfcr r3
std r3,_CCR(r1)
std r9,_MSR(r1)
std r1,PACAR1(r13)
KVM: PPC: Book3S HV: Make secondary threads more robust against stray IPIs Currently on POWER7, if we are running the guest on a core and we don't need all the hardware threads, we do nothing to ensure that the unused threads aren't executing in the kernel (other than checking that they are offline). We just assume they're napping and we don't do anything to stop them trying to enter the kernel while the guest is running. This means that a stray IPI can wake up the hardware thread and it will then try to enter the kernel, but since the core is in guest context, it will execute code from the guest in hypervisor mode once it turns the MMU on, which tends to lead to crashes or hangs in the host. This fixes the problem by adding two new one-byte flags in the kvmppc_host_state structure in the PACA which are used to interlock between the primary thread and the unused secondary threads when entering the guest. With these flags, the primary thread can ensure that the unused secondaries are not already in kernel mode (i.e. handling a stray IPI) and then indicate that they should not try to enter the kernel if they do get woken for any reason. Instead they will go into KVM code, find that there is no vcpu to run, acknowledge and clear the IPI and go back to nap mode. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-02-03 07:54:17 +07:00
#ifdef CONFIG_KVM_BOOK3S_64_HV
/* Tell KVM we're napping */
li r4,KVM_HWTHREAD_IN_NAP
stb r4,HSTATE_HWTHREAD_STATE(r13)
#endif
powerpc: Add NAP mode support on Power7 in HV mode Wakeup comes from the system reset handler with a potential loss of the non-hypervisor CPU state. We save the non-volatile state on the stack and a pointer to it in the PACA, which the system reset handler uses to restore things Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-24 14:42:41 +07:00
/* Magic NAP mode enter sequence */
std r0,0(r1)
ptesync
ld r0,0(r1)
1: cmp cr0,r0,r0
bne 1b
PPC_NAP
b .
_GLOBAL(power7_wakeup_loss)
ld r1,PACAR1(r13)
REST_NVGPRS(r1)
REST_GPR(2, r1)
ld r3,_CCR(r1)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
mtcr r3
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid
_GLOBAL(power7_wakeup_noloss)
powerpc: Provide a way for KVM to indicate that NV GPR values are lost This fixes a problem where a CPU thread coming out of nap mode can think it has valid values in the nonvolatile GPRs (r14 - r31) as saved away in power7_idle, but in fact the values have been trashed because the thread was used for KVM in the mean time. The result is that the thread crashes because code that called power7_idle (e.g., pnv_smp_cpu_kill_self()) goes to use values in registers that have been trashed. The bit field in SRR1 that tells whether state was lost only reflects the most recent nap, which may not have been the nap instruction in power7_idle. So we need an extra PACA field to indicate that state has been lost even if SRR1 indicates that the most recent nap didn't lose state. We clear this field when saving the state in power7_idle, we set it to a non-zero value when we use the thread for KVM, and we test it in power7_wakeup_noloss. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-06 02:47:26 +07:00
lbz r0,PACA_NAPSTATELOST(r13)
cmpwi r0,0
bne .power7_wakeup_loss
powerpc: Add NAP mode support on Power7 in HV mode Wakeup comes from the system reset handler with a potential loss of the non-hypervisor CPU state. We save the non-volatile state on the stack and a pointer to it in the PACA, which the system reset handler uses to restore things Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-24 14:42:41 +07:00
ld r1,PACAR1(r13)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid
Reference in New Issue Copy Permalink