License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2005-04-17 05:20:36 +07:00
|
|
|
/*
|
|
|
|
* The proc filesystem constants/structures
|
|
|
|
*/
|
2013-04-11 19:34:43 +07:00
|
|
|
#ifndef _LINUX_PROC_FS_H
|
|
|
|
#define _LINUX_PROC_FS_H
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2013-04-11 19:34:43 +07:00
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/fs.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2013-04-11 19:34:43 +07:00
|
|
|
struct proc_dir_entry;
|
2018-05-15 20:57:23 +07:00
|
|
|
struct seq_file;
|
2018-04-14 00:44:18 +07:00
|
|
|
struct seq_operations;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
proc: decouple proc from VFS with "struct proc_ops"
Currently core /proc code uses "struct file_operations" for custom hooks,
however, VFS doesn't directly call them. Every time VFS expands
file_operations hook set, /proc code bloats for no reason.
Introduce "struct proc_ops" which contains only those hooks which /proc
allows to call into (open, release, read, write, ioctl, mmap, poll). It
doesn't contain module pointer as well.
Save ~184 bytes per usage:
add/remove: 26/26 grow/shrink: 1/4 up/down: 1922/-6674 (-4752)
Function old new delta
sysvipc_proc_ops - 72 +72
...
config_gz_proc_ops - 72 +72
proc_get_inode 289 339 +50
proc_reg_get_unmapped_area 110 107 -3
close_pdeo 227 224 -3
proc_reg_open 289 284 -5
proc_create_data 60 53 -7
rt_cpu_seq_fops 256 - -256
...
default_affinity_proc_fops 256 - -256
Total: Before=5430095, After=5425343, chg -0.09%
Link: http://lkml.kernel.org/r/20191225172228.GA13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 08:37:14 +07:00
|
|
|
struct proc_ops {
|
|
|
|
int (*proc_open)(struct inode *, struct file *);
|
|
|
|
ssize_t (*proc_read)(struct file *, char __user *, size_t, loff_t *);
|
|
|
|
ssize_t (*proc_write)(struct file *, const char __user *, size_t, loff_t *);
|
|
|
|
loff_t (*proc_lseek)(struct file *, loff_t, int);
|
|
|
|
int (*proc_release)(struct inode *, struct file *);
|
|
|
|
__poll_t (*proc_poll)(struct file *, struct poll_table_struct *);
|
|
|
|
long (*proc_ioctl)(struct file *, unsigned int, unsigned long);
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
|
|
long (*proc_compat_ioctl)(struct file *, unsigned int, unsigned long);
|
|
|
|
#endif
|
|
|
|
int (*proc_mmap)(struct file *, struct vm_area_struct *);
|
|
|
|
unsigned long (*proc_get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
|
|
|
|
};
|
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
#ifdef CONFIG_PROC_FS
|
|
|
|
|
2018-05-18 17:46:15 +07:00
|
|
|
typedef int (*proc_write_t)(struct file *, char *, size_t);
|
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
extern void proc_root_init(void);
|
2013-04-11 19:34:43 +07:00
|
|
|
extern void proc_flush_task(struct task_struct *);
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
extern struct proc_dir_entry *proc_symlink(const char *,
|
|
|
|
struct proc_dir_entry *, const char *);
|
2013-04-11 19:34:43 +07:00
|
|
|
extern struct proc_dir_entry *proc_mkdir(const char *, struct proc_dir_entry *);
|
2013-04-12 08:48:30 +07:00
|
|
|
extern struct proc_dir_entry *proc_mkdir_data(const char *, umode_t,
|
|
|
|
struct proc_dir_entry *, void *);
|
2013-04-11 19:34:43 +07:00
|
|
|
extern struct proc_dir_entry *proc_mkdir_mode(const char *, umode_t,
|
|
|
|
struct proc_dir_entry *);
|
2016-11-14 18:12:56 +07:00
|
|
|
struct proc_dir_entry *proc_create_mount_point(const char *name);
|
2018-04-14 00:44:18 +07:00
|
|
|
|
2018-04-24 22:05:17 +07:00
|
|
|
struct proc_dir_entry *proc_create_seq_private(const char *name, umode_t mode,
|
2018-04-14 00:44:18 +07:00
|
|
|
struct proc_dir_entry *parent, const struct seq_operations *ops,
|
2018-04-24 22:05:17 +07:00
|
|
|
unsigned int state_size, void *data);
|
|
|
|
#define proc_create_seq_data(name, mode, parent, ops, data) \
|
|
|
|
proc_create_seq_private(name, mode, parent, ops, 0, data)
|
2018-04-14 00:44:18 +07:00
|
|
|
#define proc_create_seq(name, mode, parent, ops) \
|
2018-04-24 22:05:17 +07:00
|
|
|
proc_create_seq_private(name, mode, parent, ops, 0, NULL)
|
2018-05-15 20:57:23 +07:00
|
|
|
struct proc_dir_entry *proc_create_single_data(const char *name, umode_t mode,
|
|
|
|
struct proc_dir_entry *parent,
|
|
|
|
int (*show)(struct seq_file *, void *), void *data);
|
|
|
|
#define proc_create_single(name, mode, parent, show) \
|
|
|
|
proc_create_single_data(name, mode, parent, show, NULL)
|
2013-04-11 19:34:43 +07:00
|
|
|
|
|
|
|
extern struct proc_dir_entry *proc_create_data(const char *, umode_t,
|
|
|
|
struct proc_dir_entry *,
|
proc: decouple proc from VFS with "struct proc_ops"
Currently core /proc code uses "struct file_operations" for custom hooks,
however, VFS doesn't directly call them. Every time VFS expands
file_operations hook set, /proc code bloats for no reason.
Introduce "struct proc_ops" which contains only those hooks which /proc
allows to call into (open, release, read, write, ioctl, mmap, poll). It
doesn't contain module pointer as well.
Save ~184 bytes per usage:
add/remove: 26/26 grow/shrink: 1/4 up/down: 1922/-6674 (-4752)
Function old new delta
sysvipc_proc_ops - 72 +72
...
config_gz_proc_ops - 72 +72
proc_get_inode 289 339 +50
proc_reg_get_unmapped_area 110 107 -3
close_pdeo 227 224 -3
proc_reg_open 289 284 -5
proc_create_data 60 53 -7
rt_cpu_seq_fops 256 - -256
...
default_affinity_proc_fops 256 - -256
Total: Before=5430095, After=5425343, chg -0.09%
Link: http://lkml.kernel.org/r/20191225172228.GA13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 08:37:14 +07:00
|
|
|
const struct proc_ops *,
|
2013-04-11 19:34:43 +07:00
|
|
|
void *);
|
|
|
|
|
proc: decouple proc from VFS with "struct proc_ops"
Currently core /proc code uses "struct file_operations" for custom hooks,
however, VFS doesn't directly call them. Every time VFS expands
file_operations hook set, /proc code bloats for no reason.
Introduce "struct proc_ops" which contains only those hooks which /proc
allows to call into (open, release, read, write, ioctl, mmap, poll). It
doesn't contain module pointer as well.
Save ~184 bytes per usage:
add/remove: 26/26 grow/shrink: 1/4 up/down: 1922/-6674 (-4752)
Function old new delta
sysvipc_proc_ops - 72 +72
...
config_gz_proc_ops - 72 +72
proc_get_inode 289 339 +50
proc_reg_get_unmapped_area 110 107 -3
close_pdeo 227 224 -3
proc_reg_open 289 284 -5
proc_create_data 60 53 -7
rt_cpu_seq_fops 256 - -256
...
default_affinity_proc_fops 256 - -256
Total: Before=5430095, After=5425343, chg -0.09%
Link: http://lkml.kernel.org/r/20191225172228.GA13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 08:37:14 +07:00
|
|
|
struct proc_dir_entry *proc_create(const char *name, umode_t mode, struct proc_dir_entry *parent, const struct proc_ops *proc_ops);
|
2013-04-12 06:38:51 +07:00
|
|
|
extern void proc_set_size(struct proc_dir_entry *, loff_t);
|
|
|
|
extern void proc_set_user(struct proc_dir_entry *, kuid_t, kgid_t);
|
2013-04-13 00:03:36 +07:00
|
|
|
extern void *PDE_DATA(const struct inode *);
|
2013-04-12 20:06:01 +07:00
|
|
|
extern void *proc_get_parent_data(const struct inode *);
|
2013-04-11 19:34:43 +07:00
|
|
|
extern void proc_remove(struct proc_dir_entry *);
|
|
|
|
extern void remove_proc_entry(const char *, struct proc_dir_entry *);
|
|
|
|
extern int remove_proc_subtree(const char *, struct proc_dir_entry *);
|
|
|
|
|
2018-04-11 00:42:55 +07:00
|
|
|
struct proc_dir_entry *proc_create_net_data(const char *name, umode_t mode,
|
|
|
|
struct proc_dir_entry *parent, const struct seq_operations *ops,
|
|
|
|
unsigned int state_size, void *data);
|
2019-12-05 07:50:08 +07:00
|
|
|
#define proc_create_net(name, mode, parent, ops, state_size) \
|
|
|
|
proc_create_net_data(name, mode, parent, ops, state_size, NULL)
|
2018-04-14 01:38:35 +07:00
|
|
|
struct proc_dir_entry *proc_create_net_single(const char *name, umode_t mode,
|
|
|
|
struct proc_dir_entry *parent,
|
|
|
|
int (*show)(struct seq_file *, void *), void *data);
|
2018-05-18 17:46:15 +07:00
|
|
|
struct proc_dir_entry *proc_create_net_data_write(const char *name, umode_t mode,
|
|
|
|
struct proc_dir_entry *parent,
|
|
|
|
const struct seq_operations *ops,
|
|
|
|
proc_write_t write,
|
|
|
|
unsigned int state_size, void *data);
|
|
|
|
struct proc_dir_entry *proc_create_net_single_write(const char *name, umode_t mode,
|
|
|
|
struct proc_dir_entry *parent,
|
|
|
|
int (*show)(struct seq_file *, void *),
|
|
|
|
proc_write_t write,
|
|
|
|
void *data);
|
signal: add pidfd_send_signal() syscall
The kill() syscall operates on process identifiers (pid). After a process
has exited its pid can be reused by another process. If a caller sends a
signal to a reused pid it will end up signaling the wrong process. This
issue has often surfaced and there has been a push to address this problem [1].
This patch uses file descriptors (fd) from proc/<pid> as stable handles on
struct pid. Even if a pid is recycled the handle will not change. The fd
can be used to send signals to the process it refers to.
Thus, the new syscall pidfd_send_signal() is introduced to solve this
problem. Instead of pids it operates on process fds (pidfd).
/* prototype and argument /*
long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags);
/* syscall number 424 */
The syscall number was chosen to be 424 to align with Arnd's rework in his
y2038 to minimize merge conflicts (cf. [25]).
In addition to the pidfd and signal argument it takes an additional
siginfo_t and flags argument. If the siginfo_t argument is NULL then
pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it
is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo().
The flags argument is added to allow for future extensions of this syscall.
It currently needs to be passed as 0. Failing to do so will cause EINVAL.
/* pidfd_send_signal() replaces multiple pid-based syscalls */
The pidfd_send_signal() syscall currently takes on the job of
rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a
positive pid is passed to kill(2). It will however be possible to also
replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended.
/* sending signals to threads (tid) and process groups (pgid) */
Specifically, the pidfd_send_signal() syscall does currently not operate on
process groups or threads. This is left for future extensions.
In order to extend the syscall to allow sending signal to threads and
process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and
PIDFD_TYPE_TID) should be added. This implies that the flags argument will
determine what is signaled and not the file descriptor itself. Put in other
words, grouping in this api is a property of the flags argument not a
property of the file descriptor (cf. [13]). Clarification for this has been
requested by Eric (cf. [19]).
When appropriate extensions through the flags argument are added then
pidfd_send_signal() can additionally replace the part of kill(2) which
operates on process groups as well as the tgkill(2) and
rt_tgsigqueueinfo(2) syscalls.
How such an extension could be implemented has been very roughly sketched
in [14], [15], and [16]. However, this should not be taken as a commitment
to a particular implementation. There might be better ways to do it.
Right now this is intentionally left out to keep this patchset as simple as
possible (cf. [4]).
/* naming */
The syscall had various names throughout iterations of this patchset:
- procfd_signal()
- procfd_send_signal()
- taskfd_send_signal()
In the last round of reviews it was pointed out that given that if the
flags argument decides the scope of the signal instead of different types
of fds it might make sense to either settle for "procfd_" or "pidfd_" as
prefix. The community was willing to accept either (cf. [17] and [18]).
Given that one developer expressed strong preference for the "pidfd_"
prefix (cf. [13]) and with other developers less opinionated about the name
we should settle for "pidfd_" to avoid further bikeshedding.
The "_send_signal" suffix was chosen to reflect the fact that the syscall
takes on the job of multiple syscalls. It is therefore intentional that the
name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the
fomer because it might imply that pidfd_send_signal() is a replacement for
kill(2), and not the latter because it is a hassle to remember the correct
spelling - especially for non-native speakers - and because it is not
descriptive enough of what the syscall actually does. The name
"pidfd_send_signal" makes it very clear that its job is to send signals.
/* zombies */
Zombies can be signaled just as any other process. No special error will be
reported since a zombie state is an unreliable state (cf. [3]). However,
this can be added as an extension through the @flags argument if the need
ever arises.
/* cross-namespace signals */
The patch currently enforces that the signaler and signalee either are in
the same pid namespace or that the signaler's pid namespace is an ancestor
of the signalee's pid namespace. This is done for the sake of simplicity
and because it is unclear to what values certain members of struct
siginfo_t would need to be set to (cf. [5], [6]).
/* compat syscalls */
It became clear that we would like to avoid adding compat syscalls
(cf. [7]). The compat syscall handling is now done in kernel/signal.c
itself by adding __copy_siginfo_from_user_generic() which lets us avoid
compat syscalls (cf. [8]). It should be noted that the addition of
__copy_siginfo_from_user_any() is caused by a bug in the original
implementation of rt_sigqueueinfo(2) (cf. 12).
With upcoming rework for syscall handling things might improve
significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain
any additional callers.
/* testing */
This patch was tested on x64 and x86.
/* userspace usage */
An asciinema recording for the basic functionality can be found under [9].
With this patch a process can be killed via:
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info,
unsigned int flags)
{
#ifdef __NR_pidfd_send_signal
return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags);
#else
return -ENOSYS;
#endif
}
int main(int argc, char *argv[])
{
int fd, ret, saved_errno, sig;
if (argc < 3)
exit(EXIT_FAILURE);
fd = open(argv[1], O_DIRECTORY | O_CLOEXEC);
if (fd < 0) {
printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]);
exit(EXIT_FAILURE);
}
sig = atoi(argv[2]);
printf("Sending signal %d to process %s\n", sig, argv[1]);
ret = do_pidfd_send_signal(fd, sig, NULL, 0);
saved_errno = errno;
close(fd);
errno = saved_errno;
if (ret < 0) {
printf("%s - Failed to send signal %d to process %s\n",
strerror(errno), sig, argv[1]);
exit(EXIT_FAILURE);
}
exit(EXIT_SUCCESS);
}
/* Q&A
* Given that it seems the same questions get asked again by people who are
* late to the party it makes sense to add a Q&A section to the commit
* message so it's hopefully easier to avoid duplicate threads.
*
* For the sake of progress please consider these arguments settled unless
* there is a new point that desperately needs to be addressed. Please make
* sure to check the links to the threads in this commit message whether
* this has not already been covered.
*/
Q-01: (Florian Weimer [20], Andrew Morton [21])
What happens when the target process has exited?
A-01: Sending the signal will fail with ESRCH (cf. [22]).
Q-02: (Andrew Morton [21])
Is the task_struct pinned by the fd?
A-02: No. A reference to struct pid is kept. struct pid - as far as I
understand - was created exactly for the reason to not require to
pin struct task_struct (cf. [22]).
Q-03: (Andrew Morton [21])
Does the entire procfs directory remain visible? Just one entry
within it?
A-03: The same thing that happens right now when you hold a file descriptor
to /proc/<pid> open (cf. [22]).
Q-04: (Andrew Morton [21])
Does the pid remain reserved?
A-04: No. This patchset guarantees a stable handle not that pids are not
recycled (cf. [22]).
Q-05: (Andrew Morton [21])
Do attempts to signal that fd return errors?
A-05: See {Q,A}-01.
Q-06: (Andrew Morton [22])
Is there a cleaner way of obtaining the fd? Another syscall perhaps.
A-06: Userspace can already trivially retrieve file descriptors from procfs
so this is something that we will need to support anyway. Hence,
there's no immediate need to add another syscalls just to make
pidfd_send_signal() not dependent on the presence of procfs. However,
adding a syscalls to get such file descriptors is planned for a
future patchset (cf. [22]).
Q-07: (Andrew Morton [21] and others)
This fd-for-a-process sounds like a handy thing and people may well
think up other uses for it in the future, probably unrelated to
signals. Are the code and the interface designed to permit such
future applications?
A-07: Yes (cf. [22]).
Q-08: (Andrew Morton [21] and others)
Now I think about it, why a new syscall? This thing is looking
rather like an ioctl?
A-08: This has been extensively discussed. It was agreed that a syscall is
preferred for a variety or reasons. Here are just a few taken from
prior threads. Syscalls are safer than ioctl()s especially when
signaling to fds. Processes are a core kernel concept so a syscall
seems more appropriate. The layout of the syscall with its four
arguments would require the addition of a custom struct for the
ioctl() thereby causing at least the same amount or even more
complexity for userspace than a simple syscall. The new syscall will
replace multiple other pid-based syscalls (see description above).
The file-descriptors-for-processes concept introduced with this
syscall will be extended with other syscalls in the future. See also
[22], [23] and various other threads already linked in here.
Q-09: (Florian Weimer [24])
What happens if you use the new interface with an O_PATH descriptor?
A-09:
pidfds opened as O_PATH fds cannot be used to send signals to a
process (cf. [2]). Signaling processes through pidfds is the
equivalent of writing to a file. Thus, this is not an operation that
operates "purely at the file descriptor level" as required by the
open(2) manpage. See also [4].
/* References */
[1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/
[2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/
[3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/
[4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/
[5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/
[6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/
[7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/
[8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/
[9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy
[11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/
[12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/
[13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/
[14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/
[15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/
[16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/
[17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/
[18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/
[19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/
[20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/
[22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/
[23]: https://lwn.net/Articles/773459/
[24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-19 06:51:56 +07:00
|
|
|
extern struct pid *tgid_pidfd_to_pid(const struct file *file);
|
2018-04-11 00:42:55 +07:00
|
|
|
|
2019-06-06 08:22:34 +07:00
|
|
|
#ifdef CONFIG_PROC_PID_ARCH_STATUS
|
|
|
|
/*
|
|
|
|
* The architecture which selects CONFIG_PROC_PID_ARCH_STATUS must
|
|
|
|
* provide proc_pid_arch_status() definition.
|
|
|
|
*/
|
|
|
|
int proc_pid_arch_status(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task);
|
|
|
|
#endif /* CONFIG_PROC_PID_ARCH_STATUS */
|
|
|
|
|
2013-04-11 19:34:43 +07:00
|
|
|
#else /* CONFIG_PROC_FS */
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2014-06-05 06:12:20 +07:00
|
|
|
static inline void proc_root_init(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
2007-10-19 13:40:03 +07:00
|
|
|
static inline void proc_flush_task(struct task_struct *task)
|
|
|
|
{
|
|
|
|
}
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
static inline struct proc_dir_entry *proc_symlink(const char *name,
|
2013-04-11 19:34:43 +07:00
|
|
|
struct proc_dir_entry *parent,const char *dest) { return NULL;}
|
2005-04-17 05:20:36 +07:00
|
|
|
static inline struct proc_dir_entry *proc_mkdir(const char *name,
|
|
|
|
struct proc_dir_entry *parent) {return NULL;}
|
2016-11-14 18:12:56 +07:00
|
|
|
static inline struct proc_dir_entry *proc_create_mount_point(const char *name) { return NULL; }
|
2013-04-12 08:48:30 +07:00
|
|
|
static inline struct proc_dir_entry *proc_mkdir_data(const char *name,
|
|
|
|
umode_t mode, struct proc_dir_entry *parent, void *data) { return NULL; }
|
2011-05-18 05:44:12 +07:00
|
|
|
static inline struct proc_dir_entry *proc_mkdir_mode(const char *name,
|
2011-07-24 14:36:29 +07:00
|
|
|
umode_t mode, struct proc_dir_entry *parent) { return NULL; }
|
2018-05-15 20:57:23 +07:00
|
|
|
#define proc_create_seq_private(name, mode, parent, ops, size, data) ({NULL;})
|
2018-04-14 00:44:18 +07:00
|
|
|
#define proc_create_seq_data(name, mode, parent, ops, data) ({NULL;})
|
|
|
|
#define proc_create_seq(name, mode, parent, ops) ({NULL;})
|
2018-05-15 20:57:23 +07:00
|
|
|
#define proc_create_single(name, mode, parent, show) ({NULL;})
|
|
|
|
#define proc_create_single_data(name, mode, parent, show, data) ({NULL;})
|
proc: decouple proc from VFS with "struct proc_ops"
Currently core /proc code uses "struct file_operations" for custom hooks,
however, VFS doesn't directly call them. Every time VFS expands
file_operations hook set, /proc code bloats for no reason.
Introduce "struct proc_ops" which contains only those hooks which /proc
allows to call into (open, release, read, write, ioctl, mmap, poll). It
doesn't contain module pointer as well.
Save ~184 bytes per usage:
add/remove: 26/26 grow/shrink: 1/4 up/down: 1922/-6674 (-4752)
Function old new delta
sysvipc_proc_ops - 72 +72
...
config_gz_proc_ops - 72 +72
proc_get_inode 289 339 +50
proc_reg_get_unmapped_area 110 107 -3
close_pdeo 227 224 -3
proc_reg_open 289 284 -5
proc_create_data 60 53 -7
rt_cpu_seq_fops 256 - -256
...
default_affinity_proc_fops 256 - -256
Total: Before=5430095, After=5425343, chg -0.09%
Link: http://lkml.kernel.org/r/20191225172228.GA13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 08:37:14 +07:00
|
|
|
#define proc_create(name, mode, parent, proc_ops) ({NULL;})
|
|
|
|
#define proc_create_data(name, mode, parent, proc_ops, data) ({NULL;})
|
2013-04-11 19:34:43 +07:00
|
|
|
|
2013-04-12 06:38:51 +07:00
|
|
|
static inline void proc_set_size(struct proc_dir_entry *de, loff_t size) {}
|
|
|
|
static inline void proc_set_user(struct proc_dir_entry *de, kuid_t uid, kgid_t gid) {}
|
2013-04-13 00:03:36 +07:00
|
|
|
static inline void *PDE_DATA(const struct inode *inode) {BUG(); return NULL;}
|
2013-04-11 19:34:43 +07:00
|
|
|
static inline void *proc_get_parent_data(const struct inode *inode) { BUG(); return NULL; }
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2013-04-11 19:34:43 +07:00
|
|
|
static inline void proc_remove(struct proc_dir_entry *de) {}
|
|
|
|
#define remove_proc_entry(name, parent) do {} while (0)
|
|
|
|
static inline int remove_proc_subtree(const char *name, struct proc_dir_entry *parent) { return 0; }
|
2008-07-15 19:54:06 +07:00
|
|
|
|
2018-04-11 00:42:55 +07:00
|
|
|
#define proc_create_net_data(name, mode, parent, ops, state_size, data) ({NULL;})
|
|
|
|
#define proc_create_net(name, mode, parent, state_size, ops) ({NULL;})
|
2018-04-14 01:38:35 +07:00
|
|
|
#define proc_create_net_single(name, mode, parent, show, data) ({NULL;})
|
2018-04-11 00:42:55 +07:00
|
|
|
|
signal: add pidfd_send_signal() syscall
The kill() syscall operates on process identifiers (pid). After a process
has exited its pid can be reused by another process. If a caller sends a
signal to a reused pid it will end up signaling the wrong process. This
issue has often surfaced and there has been a push to address this problem [1].
This patch uses file descriptors (fd) from proc/<pid> as stable handles on
struct pid. Even if a pid is recycled the handle will not change. The fd
can be used to send signals to the process it refers to.
Thus, the new syscall pidfd_send_signal() is introduced to solve this
problem. Instead of pids it operates on process fds (pidfd).
/* prototype and argument /*
long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags);
/* syscall number 424 */
The syscall number was chosen to be 424 to align with Arnd's rework in his
y2038 to minimize merge conflicts (cf. [25]).
In addition to the pidfd and signal argument it takes an additional
siginfo_t and flags argument. If the siginfo_t argument is NULL then
pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it
is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo().
The flags argument is added to allow for future extensions of this syscall.
It currently needs to be passed as 0. Failing to do so will cause EINVAL.
/* pidfd_send_signal() replaces multiple pid-based syscalls */
The pidfd_send_signal() syscall currently takes on the job of
rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a
positive pid is passed to kill(2). It will however be possible to also
replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended.
/* sending signals to threads (tid) and process groups (pgid) */
Specifically, the pidfd_send_signal() syscall does currently not operate on
process groups or threads. This is left for future extensions.
In order to extend the syscall to allow sending signal to threads and
process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and
PIDFD_TYPE_TID) should be added. This implies that the flags argument will
determine what is signaled and not the file descriptor itself. Put in other
words, grouping in this api is a property of the flags argument not a
property of the file descriptor (cf. [13]). Clarification for this has been
requested by Eric (cf. [19]).
When appropriate extensions through the flags argument are added then
pidfd_send_signal() can additionally replace the part of kill(2) which
operates on process groups as well as the tgkill(2) and
rt_tgsigqueueinfo(2) syscalls.
How such an extension could be implemented has been very roughly sketched
in [14], [15], and [16]. However, this should not be taken as a commitment
to a particular implementation. There might be better ways to do it.
Right now this is intentionally left out to keep this patchset as simple as
possible (cf. [4]).
/* naming */
The syscall had various names throughout iterations of this patchset:
- procfd_signal()
- procfd_send_signal()
- taskfd_send_signal()
In the last round of reviews it was pointed out that given that if the
flags argument decides the scope of the signal instead of different types
of fds it might make sense to either settle for "procfd_" or "pidfd_" as
prefix. The community was willing to accept either (cf. [17] and [18]).
Given that one developer expressed strong preference for the "pidfd_"
prefix (cf. [13]) and with other developers less opinionated about the name
we should settle for "pidfd_" to avoid further bikeshedding.
The "_send_signal" suffix was chosen to reflect the fact that the syscall
takes on the job of multiple syscalls. It is therefore intentional that the
name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the
fomer because it might imply that pidfd_send_signal() is a replacement for
kill(2), and not the latter because it is a hassle to remember the correct
spelling - especially for non-native speakers - and because it is not
descriptive enough of what the syscall actually does. The name
"pidfd_send_signal" makes it very clear that its job is to send signals.
/* zombies */
Zombies can be signaled just as any other process. No special error will be
reported since a zombie state is an unreliable state (cf. [3]). However,
this can be added as an extension through the @flags argument if the need
ever arises.
/* cross-namespace signals */
The patch currently enforces that the signaler and signalee either are in
the same pid namespace or that the signaler's pid namespace is an ancestor
of the signalee's pid namespace. This is done for the sake of simplicity
and because it is unclear to what values certain members of struct
siginfo_t would need to be set to (cf. [5], [6]).
/* compat syscalls */
It became clear that we would like to avoid adding compat syscalls
(cf. [7]). The compat syscall handling is now done in kernel/signal.c
itself by adding __copy_siginfo_from_user_generic() which lets us avoid
compat syscalls (cf. [8]). It should be noted that the addition of
__copy_siginfo_from_user_any() is caused by a bug in the original
implementation of rt_sigqueueinfo(2) (cf. 12).
With upcoming rework for syscall handling things might improve
significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain
any additional callers.
/* testing */
This patch was tested on x64 and x86.
/* userspace usage */
An asciinema recording for the basic functionality can be found under [9].
With this patch a process can be killed via:
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info,
unsigned int flags)
{
#ifdef __NR_pidfd_send_signal
return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags);
#else
return -ENOSYS;
#endif
}
int main(int argc, char *argv[])
{
int fd, ret, saved_errno, sig;
if (argc < 3)
exit(EXIT_FAILURE);
fd = open(argv[1], O_DIRECTORY | O_CLOEXEC);
if (fd < 0) {
printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]);
exit(EXIT_FAILURE);
}
sig = atoi(argv[2]);
printf("Sending signal %d to process %s\n", sig, argv[1]);
ret = do_pidfd_send_signal(fd, sig, NULL, 0);
saved_errno = errno;
close(fd);
errno = saved_errno;
if (ret < 0) {
printf("%s - Failed to send signal %d to process %s\n",
strerror(errno), sig, argv[1]);
exit(EXIT_FAILURE);
}
exit(EXIT_SUCCESS);
}
/* Q&A
* Given that it seems the same questions get asked again by people who are
* late to the party it makes sense to add a Q&A section to the commit
* message so it's hopefully easier to avoid duplicate threads.
*
* For the sake of progress please consider these arguments settled unless
* there is a new point that desperately needs to be addressed. Please make
* sure to check the links to the threads in this commit message whether
* this has not already been covered.
*/
Q-01: (Florian Weimer [20], Andrew Morton [21])
What happens when the target process has exited?
A-01: Sending the signal will fail with ESRCH (cf. [22]).
Q-02: (Andrew Morton [21])
Is the task_struct pinned by the fd?
A-02: No. A reference to struct pid is kept. struct pid - as far as I
understand - was created exactly for the reason to not require to
pin struct task_struct (cf. [22]).
Q-03: (Andrew Morton [21])
Does the entire procfs directory remain visible? Just one entry
within it?
A-03: The same thing that happens right now when you hold a file descriptor
to /proc/<pid> open (cf. [22]).
Q-04: (Andrew Morton [21])
Does the pid remain reserved?
A-04: No. This patchset guarantees a stable handle not that pids are not
recycled (cf. [22]).
Q-05: (Andrew Morton [21])
Do attempts to signal that fd return errors?
A-05: See {Q,A}-01.
Q-06: (Andrew Morton [22])
Is there a cleaner way of obtaining the fd? Another syscall perhaps.
A-06: Userspace can already trivially retrieve file descriptors from procfs
so this is something that we will need to support anyway. Hence,
there's no immediate need to add another syscalls just to make
pidfd_send_signal() not dependent on the presence of procfs. However,
adding a syscalls to get such file descriptors is planned for a
future patchset (cf. [22]).
Q-07: (Andrew Morton [21] and others)
This fd-for-a-process sounds like a handy thing and people may well
think up other uses for it in the future, probably unrelated to
signals. Are the code and the interface designed to permit such
future applications?
A-07: Yes (cf. [22]).
Q-08: (Andrew Morton [21] and others)
Now I think about it, why a new syscall? This thing is looking
rather like an ioctl?
A-08: This has been extensively discussed. It was agreed that a syscall is
preferred for a variety or reasons. Here are just a few taken from
prior threads. Syscalls are safer than ioctl()s especially when
signaling to fds. Processes are a core kernel concept so a syscall
seems more appropriate. The layout of the syscall with its four
arguments would require the addition of a custom struct for the
ioctl() thereby causing at least the same amount or even more
complexity for userspace than a simple syscall. The new syscall will
replace multiple other pid-based syscalls (see description above).
The file-descriptors-for-processes concept introduced with this
syscall will be extended with other syscalls in the future. See also
[22], [23] and various other threads already linked in here.
Q-09: (Florian Weimer [24])
What happens if you use the new interface with an O_PATH descriptor?
A-09:
pidfds opened as O_PATH fds cannot be used to send signals to a
process (cf. [2]). Signaling processes through pidfds is the
equivalent of writing to a file. Thus, this is not an operation that
operates "purely at the file descriptor level" as required by the
open(2) manpage. See also [4].
/* References */
[1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/
[2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/
[3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/
[4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/
[5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/
[6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/
[7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/
[8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/
[9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy
[11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/
[12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/
[13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/
[14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/
[15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/
[16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/
[17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/
[18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/
[19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/
[20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/
[22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/
[23]: https://lwn.net/Articles/773459/
[24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-19 06:51:56 +07:00
|
|
|
static inline struct pid *tgid_pidfd_to_pid(const struct file *file)
|
|
|
|
{
|
|
|
|
return ERR_PTR(-EBADF);
|
|
|
|
}
|
|
|
|
|
2013-04-11 19:34:43 +07:00
|
|
|
#endif /* CONFIG_PROC_FS */
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2014-09-13 03:40:20 +07:00
|
|
|
struct net;
|
|
|
|
|
2013-04-12 08:48:30 +07:00
|
|
|
static inline struct proc_dir_entry *proc_net_mkdir(
|
|
|
|
struct net *net, const char *name, struct proc_dir_entry *parent)
|
|
|
|
{
|
|
|
|
return proc_mkdir_data(name, 0, parent, net);
|
|
|
|
}
|
|
|
|
|
2016-10-25 08:29:13 +07:00
|
|
|
struct ns_common;
|
|
|
|
int open_related_ns(struct ns_common *ns,
|
|
|
|
struct ns_common *(*get_ns)(struct ns_common *ns));
|
|
|
|
|
2018-05-16 12:19:01 +07:00
|
|
|
/* get the associated pid namespace for a file in procfs */
|
2018-08-22 11:54:37 +07:00
|
|
|
static inline struct pid_namespace *proc_pid_ns(const struct inode *inode)
|
2018-05-16 12:19:01 +07:00
|
|
|
{
|
|
|
|
return inode->i_sb->s_fs_info;
|
|
|
|
}
|
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
#endif /* _LINUX_PROC_FS_H */
|