linux_dsm_epyc7002/arch/x86/kernel/paravirt-spinlocks.c

46 lines
1.1 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
// SPDX-License-Identifier: GPL-2.0
/*
* Split spinlock implementation out into its own file, so it can be
* compiled in a FTRACE-compatible way.
*/
#include <linux/spinlock.h>
#include <linux/export.h>
x86, ticketlock: Add slowpath logic Maintain a flag in the LSB of the ticket lock tail which indicates whether anyone is in the lock slowpath and may need kicking when the current holder unlocks. The flags are set when the first locker enters the slowpath, and cleared when unlocking to an empty queue (ie, no contention). In the specific implementation of lock_spinning(), make sure to set the slowpath flags on the lock just before blocking. We must do this before the last-chance pickup test to prevent a deadlock with the unlocker: Unlocker Locker test for lock pickup -> fail unlock test slowpath -> false set slowpath flags block Whereas this works in any ordering: Unlocker Locker set slowpath flags test for lock pickup -> fail block unlock test slowpath -> true, kick If the unlocker finds that the lock has the slowpath flag set but it is actually uncontended (ie, head == tail, so nobody is waiting), then it clears the slowpath flag. The unlock code uses a locked add to update the head counter. This also acts as a full memory barrier so that its safe to subsequently read back the slowflag state, knowing that the updated lock is visible to the other CPUs. If it were an unlocked add, then the flag read may just be forwarded from the store buffer before it was visible to the other CPUs, which could result in a deadlock. Unfortunately this means we need to do a locked instruction when unlocking with PV ticketlocks. However, if PV ticketlocks are not enabled, then the old non-locked "add" is the only unlocking code. Note: this code relies on gcc making sure that unlikely() code is out of line of the fastpath, which only happens when OPTIMIZE_SIZE=n. If it doesn't the generated code isn't too bad, but its definitely suboptimal. Thanks to Srivatsa Vaddagiri for providing a bugfix to the original version of this change, which has been folded in. Thanks to Stephan Diestelhorst for commenting on some code which relied on an inaccurate reading of the x86 memory ordering rules. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Link: http://lkml.kernel.org/r/1376058122-8248-11-git-send-email-raghavendra.kt@linux.vnet.ibm.com Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Stephan Diestelhorst <stephan.diestelhorst@amd.com> Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-08-09 21:21:58 +07:00
#include <linux/jump_label.h>
#include <asm/paravirt.h>
locking/pvqspinlock, x86: Implement the paravirt qspinlock call patching We use the regular paravirt call patching to switch between: native_queued_spin_lock_slowpath() __pv_queued_spin_lock_slowpath() native_queued_spin_unlock() __pv_queued_spin_unlock() We use a callee saved call for the unlock function which reduces the i-cache footprint and allows 'inlining' of SPIN_UNLOCK functions again. We further optimize the unlock path by patching the direct call with a "movb $0,%arg1" if we are indeed using the native unlock code. This makes the unlock code almost as fast as the !PARAVIRT case. This significantly lowers the overhead of having CONFIG_PARAVIRT_SPINLOCKS enabled, even for native code. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Waiman Long <Waiman.Long@hp.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Daniel J Blueman <daniel@numascale.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Douglas Hatch <doug.hatch@hp.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paolo Bonzini <paolo.bonzini@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Scott J Norton <scott.norton@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1429901803-29771-10-git-send-email-Waiman.Long@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-25 01:56:38 +07:00
__visible void __native_queued_spin_unlock(struct qspinlock *lock)
{
native_queued_spin_unlock(lock);
}
PV_CALLEE_SAVE_REGS_THUNK(__native_queued_spin_unlock);
bool pv_is_native_spin_unlock(void)
{
return pv_lock_ops.queued_spin_unlock.func ==
__raw_callee_save___native_queued_spin_unlock;
}
__visible bool __native_vcpu_is_preempted(long cpu)
{
return false;
}
PV_CALLEE_SAVE_REGS_THUNK(__native_vcpu_is_preempted);
bool pv_is_native_vcpu_is_preempted(void)
{
return pv_lock_ops.vcpu_is_preempted.func ==
__raw_callee_save___native_vcpu_is_preempted;
}
struct pv_lock_ops pv_lock_ops = {
#ifdef CONFIG_SMP
locking/pvqspinlock, x86: Implement the paravirt qspinlock call patching We use the regular paravirt call patching to switch between: native_queued_spin_lock_slowpath() __pv_queued_spin_lock_slowpath() native_queued_spin_unlock() __pv_queued_spin_unlock() We use a callee saved call for the unlock function which reduces the i-cache footprint and allows 'inlining' of SPIN_UNLOCK functions again. We further optimize the unlock path by patching the direct call with a "movb $0,%arg1" if we are indeed using the native unlock code. This makes the unlock code almost as fast as the !PARAVIRT case. This significantly lowers the overhead of having CONFIG_PARAVIRT_SPINLOCKS enabled, even for native code. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Waiman Long <Waiman.Long@hp.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Daniel J Blueman <daniel@numascale.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Douglas Hatch <doug.hatch@hp.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paolo Bonzini <paolo.bonzini@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Scott J Norton <scott.norton@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1429901803-29771-10-git-send-email-Waiman.Long@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-25 01:56:38 +07:00
.queued_spin_lock_slowpath = native_queued_spin_lock_slowpath,
.queued_spin_unlock = PV_CALLEE_SAVE(__native_queued_spin_unlock),
.wait = paravirt_nop,
.kick = paravirt_nop,
.vcpu_is_preempted = PV_CALLEE_SAVE(__native_vcpu_is_preempted),
locking/pvqspinlock, x86: Implement the paravirt qspinlock call patching We use the regular paravirt call patching to switch between: native_queued_spin_lock_slowpath() __pv_queued_spin_lock_slowpath() native_queued_spin_unlock() __pv_queued_spin_unlock() We use a callee saved call for the unlock function which reduces the i-cache footprint and allows 'inlining' of SPIN_UNLOCK functions again. We further optimize the unlock path by patching the direct call with a "movb $0,%arg1" if we are indeed using the native unlock code. This makes the unlock code almost as fast as the !PARAVIRT case. This significantly lowers the overhead of having CONFIG_PARAVIRT_SPINLOCKS enabled, even for native code. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Waiman Long <Waiman.Long@hp.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Daniel J Blueman <daniel@numascale.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Douglas Hatch <doug.hatch@hp.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paolo Bonzini <paolo.bonzini@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Scott J Norton <scott.norton@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1429901803-29771-10-git-send-email-Waiman.Long@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-25 01:56:38 +07:00
#endif /* SMP */
};
EXPORT_SYMBOL(pv_lock_ops);