AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-24 00:22:07 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
0fdd74f778
linux_dsm_epyc7002/arch/x86/kvm/cpuid.h

121 lines
3.2 KiB
C
Raw Normal View History

KVM: Move cpuid code to new file The cpuid code has grown; put it into a separate file. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-23 21:30:32 +07:00
#ifndef ARCH_X86_KVM_CPUID_H
#define ARCH_X86_KVM_CPUID_H
#include "x86.h"
KVM: x86: Warn if guest virtual address space is not 48-bits The KVM emulator code assumes that the guest virtual address space (in 64-bit) is 48-bits wide. Fail the KVM_SET_CPUID and KVM_SET_CPUID2 ioctl if userspace tries to create a guest that does not obey this restriction. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-16 19:10:03 +07:00
int kvm_update_cpuid(struct kvm_vcpu *vcpu);
KVM: Move cpuid code to new file The cpuid code has grown; put it into a separate file. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-23 21:30:32 +07:00
struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
u32 function, u32 index);
kvm: Add KVM_GET_EMULATED_CPUID Add a kvm ioctl which states which system functionality kvm emulates. The format used is that of CPUID and we return the corresponding CPUID bits set for which we do emulate functionality. Make sure ->padding is being passed on clean from userspace so that we can use it for something in the future, after the ioctl gets cast in stone. s/kvm_dev_ioctl_get_supported_cpuid/kvm_dev_ioctl_get_cpuid/ while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-22 21:44:50 +07:00
int kvm_dev_ioctl_get_cpuid(struct kvm_cpuid2 *cpuid,
struct kvm_cpuid_entry2 __user *entries,
unsigned int type);
KVM: Move cpuid code to new file The cpuid code has grown; put it into a separate file. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-23 21:30:32 +07:00
int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu,
struct kvm_cpuid *cpuid,
struct kvm_cpuid_entry __user *entries);
int kvm_vcpu_ioctl_set_cpuid2(struct kvm_vcpu *vcpu,
struct kvm_cpuid2 *cpuid,
struct kvm_cpuid_entry2 __user *entries);
int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu,
struct kvm_cpuid2 *cpuid,
struct kvm_cpuid_entry2 __user *entries);
KVM: Split cpuid register access from computation Introduce kvm_cpuid() to perform the leaf limit check and calculate register values, and let kvm_emulate_cpuid() just handle reading and writing the registers from/to the vcpu. This allows us to reuse kvm_cpuid() in a context where directly reading and writing registers is not desired. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-07 18:07:48 +07:00
void kvm_cpuid(struct kvm_vcpu *vcpu, u32 *eax, u32 *ebx, u32 *ecx, u32 *edx);
KVM: Move cpuid code to new file The cpuid code has grown; put it into a separate file. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-23 21:30:32 +07:00
KVM: x86: cache maxphyaddr CPUID leaf in struct kvm_vcpu cpuid_maxphyaddr(), which performs lot of memory accesses is called extensively across KVM, especially in nVMX code. This patch adds a cached value of maxphyaddr to vcpu.arch to reduce the pressure onto CPU cache and simplify the code of cpuid_maxphyaddr() callers. The cached value is initialized in kvm_arch_vcpu_init() and reloaded every time CPUID is updated by usermode. It is obvious that these reloads occur infrequently. Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com> Message-Id: <20150329205612.GA1223@gnote> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-30 03:56:12 +07:00
int cpuid_query_maxphyaddr(struct kvm_vcpu *vcpu);
static inline int cpuid_maxphyaddr(struct kvm_vcpu *vcpu)
{
return vcpu->arch.maxphyaddr;
}
KVM: Move cpuid code to new file The cpuid code has grown; put it into a separate file. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-23 21:30:32 +07:00
static inline bool guest_cpuid_has_xsave(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
KVM: x86: invalid opcode oops on SET_SREGS with OSXSAVE bit set (CVE-2012-4461) On hosts without the XSAVE support unprivileged local user can trigger oops similar to the one below by setting X86_CR4_OSXSAVE bit in guest cr4 register using KVM_SET_SREGS ioctl and later issuing KVM_RUN ioctl. invalid opcode: 0000 [#2] SMP Modules linked in: tun ip6table_filter ip6_tables ebtable_nat ebtables ... Pid: 24935, comm: zoog_kvm_monito Tainted: G D 3.2.0-3-686-pae EIP: 0060:[<f8b9550c>] EFLAGS: 00210246 CPU: 0 EIP is at kvm_arch_vcpu_ioctl_run+0x92a/0xd13 [kvm] EAX: 00000001 EBX: 000f387e ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: ef5a0060 ESP: d7c63e70 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process zoog_kvm_monito (pid: 24935, ti=d7c62000 task=ed84a0c0 task.ti=d7c62000) Stack: 00000001 f70a1200 f8b940a9 ef5a0060 00000000 00200202 f8769009 00000000 ef5a0060 000f387e eda5c020 8722f9c8 00015bae 00000000 ed84a0c0 ed84a0c0 c12bf02d 0000ae80 ef7f8740 fffffffb f359b740 ef5a0060 f8b85dc1 0000ae80 Call Trace: [<f8b940a9>] ? kvm_arch_vcpu_ioctl_set_sregs+0x2fe/0x308 [kvm] ... [<c12bfb44>] ? syscall_call+0x7/0xb Code: 89 e8 e8 14 ee ff ff ba 00 00 04 00 89 e8 e8 98 48 ff ff 85 c0 74 1e 83 7d 48 00 75 18 8b 85 08 07 00 00 31 c9 8b 95 0c 07 00 00 <0f> 01 d1 c7 45 48 01 00 00 00 c7 45 1c 01 00 00 00 0f ae f0 89 EIP: [<f8b9550c>] kvm_arch_vcpu_ioctl_run+0x92a/0xd13 [kvm] SS:ESP 0068:d7c63e70 QEMU first retrieves the supported features via KVM_GET_SUPPORTED_CPUID and then sets them later. So guest's X86_FEATURE_XSAVE should be masked out on hosts without X86_FEATURE_XSAVE, making kvm_set_cr4 with X86_CR4_OSXSAVE fail. Userspaces that allow specifying guest cpuid with X86_FEATURE_XSAVE even on hosts that do not support it, might be susceptible to this attack from inside the guest as well. Allow setting X86_CR4_OSXSAVE bit only if host has XSAVE support. Signed-off-by: Petr Matousek <pmatouse@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-07 01:24:07 +07:00
if (!static_cpu_has(X86_FEATURE_XSAVE))
x86: Use bool function return values of true/false not 1/0 Use the normal return values for bool functions Signed-off-by: Joe Perches <joe@perches.com> Message-Id: <9f593eb2f43b456851cd73f7ed09654ca58fb570.1427759009.git.joe@perches.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-31 06:46:09 +07:00
return false;
KVM: x86: invalid opcode oops on SET_SREGS with OSXSAVE bit set (CVE-2012-4461) On hosts without the XSAVE support unprivileged local user can trigger oops similar to the one below by setting X86_CR4_OSXSAVE bit in guest cr4 register using KVM_SET_SREGS ioctl and later issuing KVM_RUN ioctl. invalid opcode: 0000 [#2] SMP Modules linked in: tun ip6table_filter ip6_tables ebtable_nat ebtables ... Pid: 24935, comm: zoog_kvm_monito Tainted: G D 3.2.0-3-686-pae EIP: 0060:[<f8b9550c>] EFLAGS: 00210246 CPU: 0 EIP is at kvm_arch_vcpu_ioctl_run+0x92a/0xd13 [kvm] EAX: 00000001 EBX: 000f387e ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: ef5a0060 ESP: d7c63e70 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process zoog_kvm_monito (pid: 24935, ti=d7c62000 task=ed84a0c0 task.ti=d7c62000) Stack: 00000001 f70a1200 f8b940a9 ef5a0060 00000000 00200202 f8769009 00000000 ef5a0060 000f387e eda5c020 8722f9c8 00015bae 00000000 ed84a0c0 ed84a0c0 c12bf02d 0000ae80 ef7f8740 fffffffb f359b740 ef5a0060 f8b85dc1 0000ae80 Call Trace: [<f8b940a9>] ? kvm_arch_vcpu_ioctl_set_sregs+0x2fe/0x308 [kvm] ... [<c12bfb44>] ? syscall_call+0x7/0xb Code: 89 e8 e8 14 ee ff ff ba 00 00 04 00 89 e8 e8 98 48 ff ff 85 c0 74 1e 83 7d 48 00 75 18 8b 85 08 07 00 00 31 c9 8b 95 0c 07 00 00 <0f> 01 d1 c7 45 48 01 00 00 00 c7 45 1c 01 00 00 00 0f ae f0 89 EIP: [<f8b9550c>] kvm_arch_vcpu_ioctl_run+0x92a/0xd13 [kvm] SS:ESP 0068:d7c63e70 QEMU first retrieves the supported features via KVM_GET_SUPPORTED_CPUID and then sets them later. So guest's X86_FEATURE_XSAVE should be masked out on hosts without X86_FEATURE_XSAVE, making kvm_set_cr4 with X86_CR4_OSXSAVE fail. Userspaces that allow specifying guest cpuid with X86_FEATURE_XSAVE even on hosts that do not support it, might be susceptible to this attack from inside the guest as well. Allow setting X86_CR4_OSXSAVE bit only if host has XSAVE support. Signed-off-by: Petr Matousek <pmatouse@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-07 01:24:07 +07:00
KVM: Move cpuid code to new file The cpuid code has grown; put it into a separate file. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-23 21:30:32 +07:00
best = kvm_find_cpuid_entry(vcpu, 1, 0);
return best && (best->ecx & bit(X86_FEATURE_XSAVE));
}
KVM: x86: Emulate IA32_TSC_ADJUST MSR CPUID.7.0.EBX[1]=1 indicates IA32_TSC_ADJUST MSR 0x3b is supported Basic design is to emulate the MSR by allowing reads and writes to a guest vcpu specific location to store the value of the emulated MSR while adding the value to the vmcs tsc_offset. In this way the IA32_TSC_ADJUST value will be included in all reads to the TSC MSR whether through rdmsr or rdtsc. This is of course as long as the "use TSC counter offsetting" VM-execution control is enabled as well as the IA32_TSC_ADJUST control. However, because hardware will only return the TSC + IA32_TSC_ADJUST + vmsc tsc_offset for a guest process when it does and rdtsc (with the correct settings) the value of our virtualized IA32_TSC_ADJUST must be stored in one of these three locations. The argument against storing it in the actual MSR is performance. This is likely to be seldom used while the save/restore is required on every transition. IA32_TSC_ADJUST was created as a way to solve some issues with writing TSC itself so that is not an option either. The remaining option, defined above as our solution has the problem of returning incorrect vmcs tsc_offset values (unless we intercept and fix, not done here) as mentioned above. However, more problematic is that storing the data in vmcs tsc_offset will have a different semantic effect on the system than does using the actual MSR. This is illustrated in the following example: The hypervisor set the IA32_TSC_ADJUST, then the guest sets it and a guest process performs a rdtsc. In this case the guest process will get TSC + IA32_TSC_ADJUST_hyperviser + vmsc tsc_offset including IA32_TSC_ADJUST_guest. While the total system semantics changed the semantics as seen by the guest do not and hence this will not cause a problem. Signed-off-by: Will Auld <will.auld@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-30 03:42:50 +07:00
static inline bool guest_cpuid_has_tsc_adjust(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
best = kvm_find_cpuid_entry(vcpu, 7, 0);
return best && (best->ebx & bit(X86_FEATURE_TSC_ADJUST));
}
KVM: Move cpuid code to new file The cpuid code has grown; put it into a separate file. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-23 21:30:32 +07:00
static inline bool guest_cpuid_has_smep(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
best = kvm_find_cpuid_entry(vcpu, 7, 0);
return best && (best->ebx & bit(X86_FEATURE_SMEP));
}
KVM: Add SMAP support when setting CR4 This patch adds SMAP handling logic when setting CR4 for guests Thanks a lot to Paolo Bonzini for his suggestion to use the branchless way to detect SMAP violation. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-01 16:46:34 +07:00
static inline bool guest_cpuid_has_smap(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
best = kvm_find_cpuid_entry(vcpu, 7, 0);
return best && (best->ebx & bit(X86_FEATURE_SMAP));
}
KVM: Move cpuid code to new file The cpuid code has grown; put it into a separate file. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-23 21:30:32 +07:00
static inline bool guest_cpuid_has_fsgsbase(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
best = kvm_find_cpuid_entry(vcpu, 7, 0);
return best && (best->ebx & bit(X86_FEATURE_FSGSBASE));
}
KVM: SVM: Add support for AMD's OSVW feature in guests In some cases guests should not provide workarounds for errata even when the physical processor is affected. For example, because of erratum 400 on family 10h processors a Linux guest will read an MSR (resulting in VMEXIT) before going to idle in order to avoid getting stuck in a non-C0 state. This is not necessary: HLT and IO instructions are intercepted and therefore there is no reason for erratum 400 workaround in the guest. This patch allows us to present a guest with certain errata as fixed, regardless of the state of actual hardware. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-10 02:00:35 +07:00
static inline bool guest_cpuid_has_osvw(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
best = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
return best && (best->ecx & bit(X86_FEATURE_OSVW));
}
KVM: VMX: Implement PCID/INVPCID for guests with EPT This patch handles PCID/INVPCID for guests. Process-context identifiers (PCIDs) are a facility by which a logical processor may cache information for multiple linear-address spaces so that the processor may retain cached information when software switches to a different linear address space. Refer to section 4.10.1 in IA32 Intel Software Developer's Manual Volume 3A for details. For guests with EPT, the PCID feature is enabled and INVPCID behaves as running natively. For guests without EPT, the PCID feature is disabled and INVPCID triggers #UD. Signed-off-by: Junjie Mao <junjie.mao@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-02 08:18:48 +07:00
static inline bool guest_cpuid_has_pcid(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
best = kvm_find_cpuid_entry(vcpu, 1, 0);
return best && (best->ecx & bit(X86_FEATURE_PCID));
}
KVM: x86: Validate guest writes to MSR_IA32_APICBASE Check for invalid state transitions on guest-initiated updates of MSR_IA32_APICBASE. This address both enabling of the x2APIC when it is not supported and all invalid transitions as described in SDM section 10.12.5. It also checks that no reserved bit is set in APICBASE by the guest. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> [Use cpuid_maxphyaddr instead of guest_cpuid_get_phys_bits. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-24 22:48:44 +07:00
static inline bool guest_cpuid_has_x2apic(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
best = kvm_find_cpuid_entry(vcpu, 1, 0);
return best && (best->ecx & bit(X86_FEATURE_X2APIC));
}
KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD Bit 8 would be the "global" bit, which does not quite make sense for non-leaf page table entries. Intel ignores it; AMD ignores it in PDEs, but reserves it in PDPEs and PML4Es. The SVM test is relying on this behavior, so enforce it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-02 18:24:12 +07:00
static inline bool guest_cpuid_is_amd(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
best = kvm_find_cpuid_entry(vcpu, 0, 0);
return best && best->ebx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx;
}
KVM: x86: Mark bit 7 in long-mode PDPTE according to 1GB pages support In long-mode, bit 7 in the PDPTE is not reserved only if 1GB pages are supported by the CPU. Currently the bit is considered by KVM as always reserved. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-07 19:32:50 +07:00
static inline bool guest_cpuid_has_gbpages(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
best = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
return best && (best->edx & bit(X86_FEATURE_GBPAGES));
}
KVM: x86: DR6/7.RTM cannot be written Haswell and newer Intel CPUs have support for RTM, and in that case DR6.RTM is not fixed to 1 and DR7.RTM is not fixed to zero. That is not the case in the current KVM implementation. This bug is apparent only if the MOV-DR instruction is emulated or the host also debugs the guest. This patch is a partial fix which enables DR6.RTM and DR7.RTM to be cleared and set respectively. It also sets DR6.RTM upon every debug exception. Obviously, it is not a complete fix, as debugging of RTM is still unsupported. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-15 21:37:46 +07:00
static inline bool guest_cpuid_has_rtm(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
best = kvm_find_cpuid_entry(vcpu, 7, 0);
return best && (best->ebx & bit(X86_FEATURE_RTM));
}
KVM: Move cpuid code to new file The cpuid code has grown; put it into a separate file. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-23 21:30:32 +07:00
#endif
Reference in New Issue Copy Permalink