linux_dsm_epyc7002/arch/arm64/mm/context.c

290 lines
7.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Based on arch/arm/mm/context.c
*
* Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
* Copyright (C) 2012 ARM Ltd.
*/
#include <linux/bitops.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <asm/cpufeature.h>
#include <asm/mmu_context.h>
#include <asm/smp.h>
#include <asm/tlbflush.h>
static u32 asid_bits;
static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
static atomic64_t asid_generation;
static unsigned long *asid_map;
static DEFINE_PER_CPU(atomic64_t, active_asids);
static DEFINE_PER_CPU(u64, reserved_asids);
static cpumask_t tlb_flush_pending;
#define ASID_MASK (~GENMASK(asid_bits - 1, 0))
#define ASID_FIRST_VERSION (1UL << asid_bits)
#define NUM_USER_ASIDS ASID_FIRST_VERSION
#define asid2idx(asid) ((asid) & ~ASID_MASK)
#define idx2asid(idx) asid2idx(idx)
/* Get the ASIDBits supported by the current CPU */
static u32 get_cpu_asid_bits(void)
{
u32 asid;
int fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64MMFR0_EL1),
ID_AA64MMFR0_ASID_SHIFT);
switch (fld) {
default:
pr_warn("CPU%d: Unknown ASID size (%d); assuming 8-bit\n",
smp_processor_id(), fld);
/* Fallthrough */
case 0:
asid = 8;
break;
case 2:
asid = 16;
}
return asid;
}
/* Check if the current cpu's ASIDBits is compatible with asid_bits */
void verify_cpu_asid_bits(void)
{
u32 asid = get_cpu_asid_bits();
if (asid < asid_bits) {
/*
* We cannot decrease the ASID size at runtime, so panic if we support
* fewer ASID bits than the boot CPU.
*/
pr_crit("CPU%d: smaller ASID size(%u) than boot CPU (%u)\n",
smp_processor_id(), asid, asid_bits);
cpu_panic_kernel();
}
}
static void set_kpti_asid_bits(void)
{
unsigned int len = BITS_TO_LONGS(NUM_USER_ASIDS) * sizeof(unsigned long);
/*
* In case of KPTI kernel/user ASIDs are allocated in
* pairs, the bottom bit distinguishes the two: if it
* is set, then the ASID will map only userspace. Thus
* mark even as reserved for kernel.
*/
memset(asid_map, 0xaa, len);
}
static void set_reserved_asid_bits(void)
{
if (arm64_kernel_unmapped_at_el0())
set_kpti_asid_bits();
else
bitmap_clear(asid_map, 0, NUM_USER_ASIDS);
}
static void flush_context(void)
{
int i;
u64 asid;
/* Update the list of reserved ASIDs and the ASID bitmap. */
set_reserved_asid_bits();
for_each_possible_cpu(i) {
asid = atomic64_xchg_relaxed(&per_cpu(active_asids, i), 0);
/*
* If this CPU has already been through a
* rollover, but hasn't run another task in
* the meantime, we must preserve its reserved
* ASID, as this is the only trace we have of
* the process it is still running.
*/
if (asid == 0)
asid = per_cpu(reserved_asids, i);
__set_bit(asid2idx(asid), asid_map);
per_cpu(reserved_asids, i) = asid;
}
/*
* Queue a TLB invalidation for each CPU to perform on next
* context-switch
*/
cpumask_setall(&tlb_flush_pending);
}
arm64: mm: keep reserved ASIDs in sync with mm after multiple rollovers Under some unusual context-switching patterns, it is possible to end up with multiple threads from the same mm running concurrently with different ASIDs: 1. CPU x schedules task t with mm p containing ASID a and generation g This task doesn't block and the CPU doesn't context switch. So: * per_cpu(active_asid, x) = {g,a} * p->context.id = {g,a} 2. Some other CPU generates an ASID rollover. The global generation is now (g + 1). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a} 3. CPU y schedules task t', which shares mm p with t. The generation mismatches, so we take the slowpath and hit the reserved ASID from CPU x. p is then updated so that p->context.id = {g + 1,a} 4. CPU y schedules some other task u, which has an mm != p. 5. Some other CPU generates *another* CPU rollover. The global generation is now (g + 2). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a}. 6. CPU y once again schedules task t', but now *fails* to hit the reserved ASID from CPU x because of the generation mismatch. This results in a new ASID being allocated, despite the fact that t is still running on CPU x with the same mm. Consequently, TLBIs (e.g. as a result of CoW) will not be synchronised between the two threads. This patch fixes the problem by updating all of the matching reserved ASIDs when we hit on the slowpath (i.e. in step 3 above). This keeps the reserved ASIDs in-sync with the mm and avoids the problem. Reported-by: Tony Thompson <anthony.thompson@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-26 20:49:39 +07:00
static bool check_update_reserved_asid(u64 asid, u64 newasid)
{
int cpu;
arm64: mm: keep reserved ASIDs in sync with mm after multiple rollovers Under some unusual context-switching patterns, it is possible to end up with multiple threads from the same mm running concurrently with different ASIDs: 1. CPU x schedules task t with mm p containing ASID a and generation g This task doesn't block and the CPU doesn't context switch. So: * per_cpu(active_asid, x) = {g,a} * p->context.id = {g,a} 2. Some other CPU generates an ASID rollover. The global generation is now (g + 1). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a} 3. CPU y schedules task t', which shares mm p with t. The generation mismatches, so we take the slowpath and hit the reserved ASID from CPU x. p is then updated so that p->context.id = {g + 1,a} 4. CPU y schedules some other task u, which has an mm != p. 5. Some other CPU generates *another* CPU rollover. The global generation is now (g + 2). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a}. 6. CPU y once again schedules task t', but now *fails* to hit the reserved ASID from CPU x because of the generation mismatch. This results in a new ASID being allocated, despite the fact that t is still running on CPU x with the same mm. Consequently, TLBIs (e.g. as a result of CoW) will not be synchronised between the two threads. This patch fixes the problem by updating all of the matching reserved ASIDs when we hit on the slowpath (i.e. in step 3 above). This keeps the reserved ASIDs in-sync with the mm and avoids the problem. Reported-by: Tony Thompson <anthony.thompson@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-26 20:49:39 +07:00
bool hit = false;
/*
* Iterate over the set of reserved ASIDs looking for a match.
* If we find one, then we can update our mm to use newasid
* (i.e. the same ASID in the current generation) but we can't
* exit the loop early, since we need to ensure that all copies
* of the old ASID are updated to reflect the mm. Failure to do
* so could result in us missing the reserved ASID in a future
* generation.
*/
for_each_possible_cpu(cpu) {
if (per_cpu(reserved_asids, cpu) == asid) {
hit = true;
per_cpu(reserved_asids, cpu) = newasid;
}
}
return hit;
}
static u64 new_context(struct mm_struct *mm)
{
static u32 cur_idx = 1;
u64 asid = atomic64_read(&mm->context.id);
u64 generation = atomic64_read(&asid_generation);
if (asid != 0) {
arm64: mm: keep reserved ASIDs in sync with mm after multiple rollovers Under some unusual context-switching patterns, it is possible to end up with multiple threads from the same mm running concurrently with different ASIDs: 1. CPU x schedules task t with mm p containing ASID a and generation g This task doesn't block and the CPU doesn't context switch. So: * per_cpu(active_asid, x) = {g,a} * p->context.id = {g,a} 2. Some other CPU generates an ASID rollover. The global generation is now (g + 1). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a} 3. CPU y schedules task t', which shares mm p with t. The generation mismatches, so we take the slowpath and hit the reserved ASID from CPU x. p is then updated so that p->context.id = {g + 1,a} 4. CPU y schedules some other task u, which has an mm != p. 5. Some other CPU generates *another* CPU rollover. The global generation is now (g + 2). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a}. 6. CPU y once again schedules task t', but now *fails* to hit the reserved ASID from CPU x because of the generation mismatch. This results in a new ASID being allocated, despite the fact that t is still running on CPU x with the same mm. Consequently, TLBIs (e.g. as a result of CoW) will not be synchronised between the two threads. This patch fixes the problem by updating all of the matching reserved ASIDs when we hit on the slowpath (i.e. in step 3 above). This keeps the reserved ASIDs in-sync with the mm and avoids the problem. Reported-by: Tony Thompson <anthony.thompson@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-26 20:49:39 +07:00
u64 newasid = generation | (asid & ~ASID_MASK);
/*
* If our current ASID was active during a rollover, we
* can continue to use it and this was just a false alarm.
*/
arm64: mm: keep reserved ASIDs in sync with mm after multiple rollovers Under some unusual context-switching patterns, it is possible to end up with multiple threads from the same mm running concurrently with different ASIDs: 1. CPU x schedules task t with mm p containing ASID a and generation g This task doesn't block and the CPU doesn't context switch. So: * per_cpu(active_asid, x) = {g,a} * p->context.id = {g,a} 2. Some other CPU generates an ASID rollover. The global generation is now (g + 1). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a} 3. CPU y schedules task t', which shares mm p with t. The generation mismatches, so we take the slowpath and hit the reserved ASID from CPU x. p is then updated so that p->context.id = {g + 1,a} 4. CPU y schedules some other task u, which has an mm != p. 5. Some other CPU generates *another* CPU rollover. The global generation is now (g + 2). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a}. 6. CPU y once again schedules task t', but now *fails* to hit the reserved ASID from CPU x because of the generation mismatch. This results in a new ASID being allocated, despite the fact that t is still running on CPU x with the same mm. Consequently, TLBIs (e.g. as a result of CoW) will not be synchronised between the two threads. This patch fixes the problem by updating all of the matching reserved ASIDs when we hit on the slowpath (i.e. in step 3 above). This keeps the reserved ASIDs in-sync with the mm and avoids the problem. Reported-by: Tony Thompson <anthony.thompson@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-26 20:49:39 +07:00
if (check_update_reserved_asid(asid, newasid))
return newasid;
/*
* We had a valid ASID in a previous life, so try to re-use
* it if possible.
*/
if (!__test_and_set_bit(asid2idx(asid), asid_map))
arm64: mm: keep reserved ASIDs in sync with mm after multiple rollovers Under some unusual context-switching patterns, it is possible to end up with multiple threads from the same mm running concurrently with different ASIDs: 1. CPU x schedules task t with mm p containing ASID a and generation g This task doesn't block and the CPU doesn't context switch. So: * per_cpu(active_asid, x) = {g,a} * p->context.id = {g,a} 2. Some other CPU generates an ASID rollover. The global generation is now (g + 1). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a} 3. CPU y schedules task t', which shares mm p with t. The generation mismatches, so we take the slowpath and hit the reserved ASID from CPU x. p is then updated so that p->context.id = {g + 1,a} 4. CPU y schedules some other task u, which has an mm != p. 5. Some other CPU generates *another* CPU rollover. The global generation is now (g + 2). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a}. 6. CPU y once again schedules task t', but now *fails* to hit the reserved ASID from CPU x because of the generation mismatch. This results in a new ASID being allocated, despite the fact that t is still running on CPU x with the same mm. Consequently, TLBIs (e.g. as a result of CoW) will not be synchronised between the two threads. This patch fixes the problem by updating all of the matching reserved ASIDs when we hit on the slowpath (i.e. in step 3 above). This keeps the reserved ASIDs in-sync with the mm and avoids the problem. Reported-by: Tony Thompson <anthony.thompson@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-26 20:49:39 +07:00
return newasid;
}
/*
* Allocate a free ASID. If we can't find one, take a note of the
* currently active ASIDs and mark the TLBs as requiring flushes. We
* always count from ASID #2 (index 1), as we use ASID #0 when setting
* a reserved TTBR0 for the init_mm and we allocate ASIDs in even/odd
* pairs.
*/
asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, cur_idx);
if (asid != NUM_USER_ASIDS)
goto set_asid;
/* We're out of ASIDs, so increment the global generation count */
generation = atomic64_add_return_relaxed(ASID_FIRST_VERSION,
&asid_generation);
flush_context();
/* We have more ASIDs than CPUs, so this will always succeed */
asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
set_asid:
__set_bit(asid, asid_map);
cur_idx = asid;
return idx2asid(asid) | generation;
}
void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
{
unsigned long flags;
arm64: asid: Do not replace active_asids if already 0 Under some uncommon timing conditions, a generation check and xchg(active_asids, A1) in check_and_switch_context() on P1 can race with an ASID roll-over on P2. If P2 has not seen the update to active_asids[P1], it can re-allocate A1 to a new task T2 on P2. P1 ends up waiting on the spinlock since the xchg() returned 0 while P2 can go through a second ASID roll-over with (T2,A1,G2) active on P2. This roll-over copies active_asids[P1] == A1,G1 into reserved_asids[P1] and active_asids[P2] == A1,G2 into reserved_asids[P2]. A subsequent scheduling of T1 on P1 and T2 on P2 would match reserved_asids and get their generation bumped to G3: P1 P2 -- -- TTBR0.BADDR = T0 TTBR0.ASID = A0 asid_generation = G1 check_and_switch_context(T1,A1,G1) generation match check_and_switch_context(T2,A0,G0) new_context() ASID roll-over asid_generation = G2 flush_context() active_asids[P1] = 0 asid_map[A1] = 0 reserved_asids[P1] = A0,G0 xchg(active_asids, A1) active_asids[P1] = A1,G1 xchg returns 0 spin_lock_irqsave() allocated ASID (T2,A1,G2) asid_map[A1] = 1 active_asids[P2] = A1,G2 ... check_and_switch_context(T3,A0,G0) new_context() ASID roll-over asid_generation = G3 flush_context() active_asids[P1] = 0 asid_map[A1] = 1 reserved_asids[P1] = A1,G1 reserved_asids[P2] = A1,G2 allocated ASID (T3,A2,G3) asid_map[A2] = 1 active_asids[P2] = A2,G3 new_context() check_update_reserved_asid(A1,G1) matches reserved_asid[P1] reserved_asid[P1] = A1,G3 updated T1 ASID to (T1,A1,G3) check_and_switch_context(T2,A1,G2) new_context() check_and_switch_context(A1,G2) matches reserved_asids[P2] reserved_asids[P2] = A1,G3 updated T2 ASID to (T2,A1,G3) At this point, we have two tasks, T1 and T2 both using ASID A1 with the latest generation G3. Any of them is allowed to be scheduled on the other CPU leading to two different tasks with the same ASID on the same CPU. This patch changes the xchg to cmpxchg so that the active_asids is only updated if non-zero to avoid a race with an ASID roll-over on a different CPU. The ASID allocation algorithm has been formally verified using the TLA+ model checker (see https://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/kernel-tla.git/tree/asidalloc.tla for the spec). Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-12-27 22:12:56 +07:00
u64 asid, old_active_asid;
arm64: mm: Support Common Not Private translations Common Not Private (CNP) is a feature of ARMv8.2 extension which allows translation table entries to be shared between different PEs in the same inner shareable domain, so the hardware can use this fact to optimise the caching of such entries in the TLB. CNP occupies one bit in TTBRx_ELy and VTTBR_EL2, which advertises to the hardware that the translation table entries pointed to by this TTBR are the same as every PE in the same inner shareable domain for which the equivalent TTBR also has CNP bit set. In case CNP bit is set but TTBR does not point at the same translation table entries for a given ASID and VMID, then the system is mis-configured, so the results of translations are UNPREDICTABLE. For kernel we postpone setting CNP till all cpus are up and rely on cpufeature framework to 1) patch the code which is sensitive to CNP and 2) update TTBR1_EL1 with CNP bit set. TTBR1_EL1 can be reprogrammed as result of hibernation or cpuidle (via __enable_mmu). For these two cases we restore CnP bit via __cpu_suspend_exit(). There are a few cases we need to care of changes in TTBR0_EL1: - a switch to idmap - software emulated PAN we rule out latter via Kconfig options and for the former we make sure that CNP is set for non-zero ASIDs only. Reviewed-by: James Morse <james.morse@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> [catalin.marinas@arm.com: default y for CONFIG_ARM64_CNP] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-31 20:08:56 +07:00
if (system_supports_cnp())
cpu_set_reserved_ttbr0();
asid = atomic64_read(&mm->context.id);
/*
* The memory ordering here is subtle.
arm64: asid: Do not replace active_asids if already 0 Under some uncommon timing conditions, a generation check and xchg(active_asids, A1) in check_and_switch_context() on P1 can race with an ASID roll-over on P2. If P2 has not seen the update to active_asids[P1], it can re-allocate A1 to a new task T2 on P2. P1 ends up waiting on the spinlock since the xchg() returned 0 while P2 can go through a second ASID roll-over with (T2,A1,G2) active on P2. This roll-over copies active_asids[P1] == A1,G1 into reserved_asids[P1] and active_asids[P2] == A1,G2 into reserved_asids[P2]. A subsequent scheduling of T1 on P1 and T2 on P2 would match reserved_asids and get their generation bumped to G3: P1 P2 -- -- TTBR0.BADDR = T0 TTBR0.ASID = A0 asid_generation = G1 check_and_switch_context(T1,A1,G1) generation match check_and_switch_context(T2,A0,G0) new_context() ASID roll-over asid_generation = G2 flush_context() active_asids[P1] = 0 asid_map[A1] = 0 reserved_asids[P1] = A0,G0 xchg(active_asids, A1) active_asids[P1] = A1,G1 xchg returns 0 spin_lock_irqsave() allocated ASID (T2,A1,G2) asid_map[A1] = 1 active_asids[P2] = A1,G2 ... check_and_switch_context(T3,A0,G0) new_context() ASID roll-over asid_generation = G3 flush_context() active_asids[P1] = 0 asid_map[A1] = 1 reserved_asids[P1] = A1,G1 reserved_asids[P2] = A1,G2 allocated ASID (T3,A2,G3) asid_map[A2] = 1 active_asids[P2] = A2,G3 new_context() check_update_reserved_asid(A1,G1) matches reserved_asid[P1] reserved_asid[P1] = A1,G3 updated T1 ASID to (T1,A1,G3) check_and_switch_context(T2,A1,G2) new_context() check_and_switch_context(A1,G2) matches reserved_asids[P2] reserved_asids[P2] = A1,G3 updated T2 ASID to (T2,A1,G3) At this point, we have two tasks, T1 and T2 both using ASID A1 with the latest generation G3. Any of them is allowed to be scheduled on the other CPU leading to two different tasks with the same ASID on the same CPU. This patch changes the xchg to cmpxchg so that the active_asids is only updated if non-zero to avoid a race with an ASID roll-over on a different CPU. The ASID allocation algorithm has been formally verified using the TLA+ model checker (see https://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/kernel-tla.git/tree/asidalloc.tla for the spec). Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-12-27 22:12:56 +07:00
* If our active_asids is non-zero and the ASID matches the current
* generation, then we update the active_asids entry with a relaxed
* cmpxchg. Racing with a concurrent rollover means that either:
*
arm64: asid: Do not replace active_asids if already 0 Under some uncommon timing conditions, a generation check and xchg(active_asids, A1) in check_and_switch_context() on P1 can race with an ASID roll-over on P2. If P2 has not seen the update to active_asids[P1], it can re-allocate A1 to a new task T2 on P2. P1 ends up waiting on the spinlock since the xchg() returned 0 while P2 can go through a second ASID roll-over with (T2,A1,G2) active on P2. This roll-over copies active_asids[P1] == A1,G1 into reserved_asids[P1] and active_asids[P2] == A1,G2 into reserved_asids[P2]. A subsequent scheduling of T1 on P1 and T2 on P2 would match reserved_asids and get their generation bumped to G3: P1 P2 -- -- TTBR0.BADDR = T0 TTBR0.ASID = A0 asid_generation = G1 check_and_switch_context(T1,A1,G1) generation match check_and_switch_context(T2,A0,G0) new_context() ASID roll-over asid_generation = G2 flush_context() active_asids[P1] = 0 asid_map[A1] = 0 reserved_asids[P1] = A0,G0 xchg(active_asids, A1) active_asids[P1] = A1,G1 xchg returns 0 spin_lock_irqsave() allocated ASID (T2,A1,G2) asid_map[A1] = 1 active_asids[P2] = A1,G2 ... check_and_switch_context(T3,A0,G0) new_context() ASID roll-over asid_generation = G3 flush_context() active_asids[P1] = 0 asid_map[A1] = 1 reserved_asids[P1] = A1,G1 reserved_asids[P2] = A1,G2 allocated ASID (T3,A2,G3) asid_map[A2] = 1 active_asids[P2] = A2,G3 new_context() check_update_reserved_asid(A1,G1) matches reserved_asid[P1] reserved_asid[P1] = A1,G3 updated T1 ASID to (T1,A1,G3) check_and_switch_context(T2,A1,G2) new_context() check_and_switch_context(A1,G2) matches reserved_asids[P2] reserved_asids[P2] = A1,G3 updated T2 ASID to (T2,A1,G3) At this point, we have two tasks, T1 and T2 both using ASID A1 with the latest generation G3. Any of them is allowed to be scheduled on the other CPU leading to two different tasks with the same ASID on the same CPU. This patch changes the xchg to cmpxchg so that the active_asids is only updated if non-zero to avoid a race with an ASID roll-over on a different CPU. The ASID allocation algorithm has been formally verified using the TLA+ model checker (see https://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/kernel-tla.git/tree/asidalloc.tla for the spec). Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-12-27 22:12:56 +07:00
* - We get a zero back from the cmpxchg and end up waiting on the
* lock. Taking the lock synchronises with the rollover and so
* we are forced to see the updated generation.
*
arm64: asid: Do not replace active_asids if already 0 Under some uncommon timing conditions, a generation check and xchg(active_asids, A1) in check_and_switch_context() on P1 can race with an ASID roll-over on P2. If P2 has not seen the update to active_asids[P1], it can re-allocate A1 to a new task T2 on P2. P1 ends up waiting on the spinlock since the xchg() returned 0 while P2 can go through a second ASID roll-over with (T2,A1,G2) active on P2. This roll-over copies active_asids[P1] == A1,G1 into reserved_asids[P1] and active_asids[P2] == A1,G2 into reserved_asids[P2]. A subsequent scheduling of T1 on P1 and T2 on P2 would match reserved_asids and get their generation bumped to G3: P1 P2 -- -- TTBR0.BADDR = T0 TTBR0.ASID = A0 asid_generation = G1 check_and_switch_context(T1,A1,G1) generation match check_and_switch_context(T2,A0,G0) new_context() ASID roll-over asid_generation = G2 flush_context() active_asids[P1] = 0 asid_map[A1] = 0 reserved_asids[P1] = A0,G0 xchg(active_asids, A1) active_asids[P1] = A1,G1 xchg returns 0 spin_lock_irqsave() allocated ASID (T2,A1,G2) asid_map[A1] = 1 active_asids[P2] = A1,G2 ... check_and_switch_context(T3,A0,G0) new_context() ASID roll-over asid_generation = G3 flush_context() active_asids[P1] = 0 asid_map[A1] = 1 reserved_asids[P1] = A1,G1 reserved_asids[P2] = A1,G2 allocated ASID (T3,A2,G3) asid_map[A2] = 1 active_asids[P2] = A2,G3 new_context() check_update_reserved_asid(A1,G1) matches reserved_asid[P1] reserved_asid[P1] = A1,G3 updated T1 ASID to (T1,A1,G3) check_and_switch_context(T2,A1,G2) new_context() check_and_switch_context(A1,G2) matches reserved_asids[P2] reserved_asids[P2] = A1,G3 updated T2 ASID to (T2,A1,G3) At this point, we have two tasks, T1 and T2 both using ASID A1 with the latest generation G3. Any of them is allowed to be scheduled on the other CPU leading to two different tasks with the same ASID on the same CPU. This patch changes the xchg to cmpxchg so that the active_asids is only updated if non-zero to avoid a race with an ASID roll-over on a different CPU. The ASID allocation algorithm has been formally verified using the TLA+ model checker (see https://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/kernel-tla.git/tree/asidalloc.tla for the spec). Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-12-27 22:12:56 +07:00
* - We get a valid ASID back from the cmpxchg, which means the
* relaxed xchg in flush_context will treat us as reserved
* because atomic RmWs are totally ordered for a given location.
*/
arm64: asid: Do not replace active_asids if already 0 Under some uncommon timing conditions, a generation check and xchg(active_asids, A1) in check_and_switch_context() on P1 can race with an ASID roll-over on P2. If P2 has not seen the update to active_asids[P1], it can re-allocate A1 to a new task T2 on P2. P1 ends up waiting on the spinlock since the xchg() returned 0 while P2 can go through a second ASID roll-over with (T2,A1,G2) active on P2. This roll-over copies active_asids[P1] == A1,G1 into reserved_asids[P1] and active_asids[P2] == A1,G2 into reserved_asids[P2]. A subsequent scheduling of T1 on P1 and T2 on P2 would match reserved_asids and get their generation bumped to G3: P1 P2 -- -- TTBR0.BADDR = T0 TTBR0.ASID = A0 asid_generation = G1 check_and_switch_context(T1,A1,G1) generation match check_and_switch_context(T2,A0,G0) new_context() ASID roll-over asid_generation = G2 flush_context() active_asids[P1] = 0 asid_map[A1] = 0 reserved_asids[P1] = A0,G0 xchg(active_asids, A1) active_asids[P1] = A1,G1 xchg returns 0 spin_lock_irqsave() allocated ASID (T2,A1,G2) asid_map[A1] = 1 active_asids[P2] = A1,G2 ... check_and_switch_context(T3,A0,G0) new_context() ASID roll-over asid_generation = G3 flush_context() active_asids[P1] = 0 asid_map[A1] = 1 reserved_asids[P1] = A1,G1 reserved_asids[P2] = A1,G2 allocated ASID (T3,A2,G3) asid_map[A2] = 1 active_asids[P2] = A2,G3 new_context() check_update_reserved_asid(A1,G1) matches reserved_asid[P1] reserved_asid[P1] = A1,G3 updated T1 ASID to (T1,A1,G3) check_and_switch_context(T2,A1,G2) new_context() check_and_switch_context(A1,G2) matches reserved_asids[P2] reserved_asids[P2] = A1,G3 updated T2 ASID to (T2,A1,G3) At this point, we have two tasks, T1 and T2 both using ASID A1 with the latest generation G3. Any of them is allowed to be scheduled on the other CPU leading to two different tasks with the same ASID on the same CPU. This patch changes the xchg to cmpxchg so that the active_asids is only updated if non-zero to avoid a race with an ASID roll-over on a different CPU. The ASID allocation algorithm has been formally verified using the TLA+ model checker (see https://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/kernel-tla.git/tree/asidalloc.tla for the spec). Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-12-27 22:12:56 +07:00
old_active_asid = atomic64_read(&per_cpu(active_asids, cpu));
if (old_active_asid &&
!((asid ^ atomic64_read(&asid_generation)) >> asid_bits) &&
atomic64_cmpxchg_relaxed(&per_cpu(active_asids, cpu),
old_active_asid, asid))
goto switch_mm_fastpath;
raw_spin_lock_irqsave(&cpu_asid_lock, flags);
/* Check that our ASID belongs to the current generation. */
asid = atomic64_read(&mm->context.id);
if ((asid ^ atomic64_read(&asid_generation)) >> asid_bits) {
asid = new_context(mm);
atomic64_set(&mm->context.id, asid);
}
if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending))
local_flush_tlb_all();
atomic64_set(&per_cpu(active_asids, cpu), asid);
raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
switch_mm_fastpath:
arm64_apply_bp_hardening();
/*
* Defer TTBR0_EL1 setting for user threads to uaccess_enable() when
* emulating PAN.
*/
if (!system_uses_ttbr0_pan())
cpu_switch_mm(mm->pgd, mm);
}
/* Errata workaround post TTBRx_EL1 update. */
asmlinkage void post_ttbr_update_workaround(void)
{
asm(ALTERNATIVE("nop; nop; nop",
"ic iallu; dsb nsh; isb",
ARM64_WORKAROUND_CAVIUM_27456,
CONFIG_CAVIUM_ERRATUM_27456));
}
static int asids_init(void)
{
asid_bits = get_cpu_asid_bits();
/*
* Expect allocation after rollover to fail if we don't have at least
* one more ASID than CPUs. ASID #0 is reserved for init_mm.
*/
WARN_ON(NUM_USER_ASIDS - 1 <= num_possible_cpus());
atomic64_set(&asid_generation, ASID_FIRST_VERSION);
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 04:03:40 +07:00
asid_map = kcalloc(BITS_TO_LONGS(NUM_USER_ASIDS), sizeof(*asid_map),
GFP_KERNEL);
if (!asid_map)
panic("Failed to allocate bitmap for %lu ASIDs\n",
NUM_USER_ASIDS);
/*
* We cannot call set_reserved_asid_bits() here because CPU
* caps are not finalized yet, so it is safer to assume KPTI
* and reserve kernel ASID's from beginning.
*/
if (IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0))
set_kpti_asid_bits();
pr_info("ASID allocator initialised with %lu entries\n", NUM_USER_ASIDS);
return 0;
}
early_initcall(asids_init);