linux_dsm_epyc7002/drivers/nfc/pn533/pn533.c

2708 lines
60 KiB
C
Raw Normal View History

/*
* Driver for NXP PN533 NFC Chip - core functions
*
* Copyright (C) 2011 Instituto Nokia de Tecnologia
* Copyright (C) 2012-2013 Tieto Poland
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/nfc.h>
#include <linux/netdevice.h>
#include <net/nfc/nfc.h>
#include "pn533.h"
#define VERSION "0.3"
/* How much time we spend listening for initiators */
#define PN533_LISTEN_TIME 2
/* Delay between each poll frame (ms) */
#define PN533_POLL_INTERVAL 10
/* structs for pn533 commands */
/* PN533_CMD_GET_FIRMWARE_VERSION */
struct pn533_fw_version {
u8 ic;
u8 ver;
u8 rev;
u8 support;
};
/* PN533_CMD_RF_CONFIGURATION */
#define PN533_CFGITEM_RF_FIELD 0x01
#define PN533_CFGITEM_TIMING 0x02
#define PN533_CFGITEM_MAX_RETRIES 0x05
#define PN533_CFGITEM_PASORI 0x82
#define PN533_CFGITEM_RF_FIELD_AUTO_RFCA 0x2
#define PN533_CFGITEM_RF_FIELD_ON 0x1
#define PN533_CFGITEM_RF_FIELD_OFF 0x0
#define PN533_CONFIG_TIMING_102 0xb
#define PN533_CONFIG_TIMING_204 0xc
#define PN533_CONFIG_TIMING_409 0xd
#define PN533_CONFIG_TIMING_819 0xe
#define PN533_CONFIG_MAX_RETRIES_NO_RETRY 0x00
#define PN533_CONFIG_MAX_RETRIES_ENDLESS 0xFF
struct pn533_config_max_retries {
u8 mx_rty_atr;
u8 mx_rty_psl;
u8 mx_rty_passive_act;
} __packed;
struct pn533_config_timing {
u8 rfu;
u8 atr_res_timeout;
u8 dep_timeout;
} __packed;
/* PN533_CMD_IN_LIST_PASSIVE_TARGET */
/* felica commands opcode */
#define PN533_FELICA_OPC_SENSF_REQ 0
#define PN533_FELICA_OPC_SENSF_RES 1
/* felica SENSF_REQ parameters */
#define PN533_FELICA_SENSF_SC_ALL 0xFFFF
#define PN533_FELICA_SENSF_RC_NO_SYSTEM_CODE 0
#define PN533_FELICA_SENSF_RC_SYSTEM_CODE 1
#define PN533_FELICA_SENSF_RC_ADVANCED_PROTOCOL 2
/* type B initiator_data values */
#define PN533_TYPE_B_AFI_ALL_FAMILIES 0
#define PN533_TYPE_B_POLL_METHOD_TIMESLOT 0
#define PN533_TYPE_B_POLL_METHOD_PROBABILISTIC 1
union pn533_cmd_poll_initdata {
struct {
u8 afi;
u8 polling_method;
} __packed type_b;
struct {
u8 opcode;
__be16 sc;
u8 rc;
u8 tsn;
} __packed felica;
};
struct pn533_poll_modulations {
struct {
u8 maxtg;
u8 brty;
union pn533_cmd_poll_initdata initiator_data;
} __packed data;
u8 len;
};
static const struct pn533_poll_modulations poll_mod[] = {
[PN533_POLL_MOD_106KBPS_A] = {
.data = {
.maxtg = 1,
.brty = 0,
},
.len = 2,
},
[PN533_POLL_MOD_212KBPS_FELICA] = {
.data = {
.maxtg = 1,
.brty = 1,
.initiator_data.felica = {
.opcode = PN533_FELICA_OPC_SENSF_REQ,
.sc = PN533_FELICA_SENSF_SC_ALL,
.rc = PN533_FELICA_SENSF_RC_SYSTEM_CODE,
.tsn = 0x03,
},
},
.len = 7,
},
[PN533_POLL_MOD_424KBPS_FELICA] = {
.data = {
.maxtg = 1,
.brty = 2,
.initiator_data.felica = {
.opcode = PN533_FELICA_OPC_SENSF_REQ,
.sc = PN533_FELICA_SENSF_SC_ALL,
.rc = PN533_FELICA_SENSF_RC_SYSTEM_CODE,
.tsn = 0x03,
},
},
.len = 7,
},
[PN533_POLL_MOD_106KBPS_JEWEL] = {
.data = {
.maxtg = 1,
.brty = 4,
},
.len = 2,
},
[PN533_POLL_MOD_847KBPS_B] = {
.data = {
.maxtg = 1,
.brty = 8,
.initiator_data.type_b = {
.afi = PN533_TYPE_B_AFI_ALL_FAMILIES,
.polling_method =
PN533_TYPE_B_POLL_METHOD_TIMESLOT,
},
},
.len = 3,
},
[PN533_LISTEN_MOD] = {
.len = 0,
},
};
/* PN533_CMD_IN_ATR */
struct pn533_cmd_activate_response {
u8 status;
u8 nfcid3t[10];
u8 didt;
u8 bst;
u8 brt;
u8 to;
u8 ppt;
/* optional */
u8 gt[];
} __packed;
struct pn533_cmd_jump_dep_response {
u8 status;
u8 tg;
u8 nfcid3t[10];
u8 didt;
u8 bst;
u8 brt;
u8 to;
u8 ppt;
/* optional */
u8 gt[];
} __packed;
/* PN533_TG_INIT_AS_TARGET */
#define PN533_INIT_TARGET_PASSIVE 0x1
#define PN533_INIT_TARGET_DEP 0x2
#define PN533_INIT_TARGET_RESP_FRAME_MASK 0x3
#define PN533_INIT_TARGET_RESP_ACTIVE 0x1
#define PN533_INIT_TARGET_RESP_DEP 0x4
/* The rule: value(high byte) + value(low byte) + checksum = 0 */
static inline u8 pn533_ext_checksum(u16 value)
{
return ~(u8)(((value & 0xFF00) >> 8) + (u8)(value & 0xFF)) + 1;
}
/* The rule: value + checksum = 0 */
static inline u8 pn533_std_checksum(u8 value)
{
return ~value + 1;
}
/* The rule: sum(data elements) + checksum = 0 */
static u8 pn533_std_data_checksum(u8 *data, int datalen)
{
u8 sum = 0;
int i;
for (i = 0; i < datalen; i++)
sum += data[i];
return pn533_std_checksum(sum);
}
static void pn533_std_tx_frame_init(void *_frame, u8 cmd_code)
{
struct pn533_std_frame *frame = _frame;
frame->preamble = 0;
frame->start_frame = cpu_to_be16(PN533_STD_FRAME_SOF);
PN533_STD_FRAME_IDENTIFIER(frame) = PN533_STD_FRAME_DIR_OUT;
PN533_FRAME_CMD(frame) = cmd_code;
frame->datalen = 2;
}
static void pn533_std_tx_frame_finish(void *_frame)
{
struct pn533_std_frame *frame = _frame;
frame->datalen_checksum = pn533_std_checksum(frame->datalen);
PN533_STD_FRAME_CHECKSUM(frame) =
pn533_std_data_checksum(frame->data, frame->datalen);
PN533_STD_FRAME_POSTAMBLE(frame) = 0;
}
static void pn533_std_tx_update_payload_len(void *_frame, int len)
{
struct pn533_std_frame *frame = _frame;
frame->datalen += len;
}
static bool pn533_std_rx_frame_is_valid(void *_frame, struct pn533 *dev)
{
u8 checksum;
struct pn533_std_frame *stdf = _frame;
if (stdf->start_frame != cpu_to_be16(PN533_STD_FRAME_SOF))
return false;
if (likely(!PN533_STD_IS_EXTENDED(stdf))) {
/* Standard frame code */
dev->ops->rx_header_len = PN533_STD_FRAME_HEADER_LEN;
checksum = pn533_std_checksum(stdf->datalen);
if (checksum != stdf->datalen_checksum)
return false;
checksum = pn533_std_data_checksum(stdf->data, stdf->datalen);
if (checksum != PN533_STD_FRAME_CHECKSUM(stdf))
return false;
} else {
/* Extended */
struct pn533_ext_frame *eif = _frame;
dev->ops->rx_header_len = PN533_EXT_FRAME_HEADER_LEN;
checksum = pn533_ext_checksum(be16_to_cpu(eif->datalen));
if (checksum != eif->datalen_checksum)
return false;
/* check data checksum */
checksum = pn533_std_data_checksum(eif->data,
be16_to_cpu(eif->datalen));
if (checksum != PN533_EXT_FRAME_CHECKSUM(eif))
return false;
}
return true;
}
bool pn533_rx_frame_is_ack(void *_frame)
{
struct pn533_std_frame *frame = _frame;
if (frame->start_frame != cpu_to_be16(PN533_STD_FRAME_SOF))
return false;
if (frame->datalen != 0 || frame->datalen_checksum != 0xFF)
return false;
return true;
}
EXPORT_SYMBOL_GPL(pn533_rx_frame_is_ack);
static inline int pn533_std_rx_frame_size(void *frame)
{
struct pn533_std_frame *f = frame;
/* check for Extended Information frame */
if (PN533_STD_IS_EXTENDED(f)) {
struct pn533_ext_frame *eif = frame;
return sizeof(struct pn533_ext_frame)
+ be16_to_cpu(eif->datalen) + PN533_STD_FRAME_TAIL_LEN;
}
return sizeof(struct pn533_std_frame) + f->datalen +
PN533_STD_FRAME_TAIL_LEN;
}
static u8 pn533_std_get_cmd_code(void *frame)
{
struct pn533_std_frame *f = frame;
struct pn533_ext_frame *eif = frame;
if (PN533_STD_IS_EXTENDED(f))
return PN533_FRAME_CMD(eif);
else
return PN533_FRAME_CMD(f);
}
bool pn533_rx_frame_is_cmd_response(struct pn533 *dev, void *frame)
{
return (dev->ops->get_cmd_code(frame) ==
PN533_CMD_RESPONSE(dev->cmd->code));
}
EXPORT_SYMBOL_GPL(pn533_rx_frame_is_cmd_response);
static struct pn533_frame_ops pn533_std_frame_ops = {
.tx_frame_init = pn533_std_tx_frame_init,
.tx_frame_finish = pn533_std_tx_frame_finish,
.tx_update_payload_len = pn533_std_tx_update_payload_len,
.tx_header_len = PN533_STD_FRAME_HEADER_LEN,
.tx_tail_len = PN533_STD_FRAME_TAIL_LEN,
.rx_is_frame_valid = pn533_std_rx_frame_is_valid,
.rx_frame_size = pn533_std_rx_frame_size,
.rx_header_len = PN533_STD_FRAME_HEADER_LEN,
.rx_tail_len = PN533_STD_FRAME_TAIL_LEN,
.max_payload_len = PN533_STD_FRAME_MAX_PAYLOAD_LEN,
.get_cmd_code = pn533_std_get_cmd_code,
};
static void pn533_build_cmd_frame(struct pn533 *dev, u8 cmd_code,
struct sk_buff *skb)
{
/* payload is already there, just update datalen */
int payload_len = skb->len;
struct pn533_frame_ops *ops = dev->ops;
skb_push(skb, ops->tx_header_len);
skb_put(skb, ops->tx_tail_len);
ops->tx_frame_init(skb->data, cmd_code);
ops->tx_update_payload_len(skb->data, payload_len);
ops->tx_frame_finish(skb->data);
}
static int pn533_send_async_complete(struct pn533 *dev)
{
struct pn533_cmd *cmd = dev->cmd;
struct sk_buff *resp;
int status, rc = 0;
if (!cmd) {
dev_dbg(dev->dev, "%s: cmd not set\n", __func__);
goto done;
}
dev_kfree_skb(cmd->req);
status = cmd->status;
resp = cmd->resp;
if (status < 0) {
rc = cmd->complete_cb(dev, cmd->complete_cb_context,
ERR_PTR(status));
dev_kfree_skb(resp);
goto done;
}
/* when no response is set we got interrupted */
if (!resp)
resp = ERR_PTR(-EINTR);
if (!IS_ERR(resp)) {
skb_pull(resp, dev->ops->rx_header_len);
skb_trim(resp, resp->len - dev->ops->rx_tail_len);
}
rc = cmd->complete_cb(dev, cmd->complete_cb_context, resp);
done:
kfree(cmd);
dev->cmd = NULL;
return rc;
}
static int __pn533_send_async(struct pn533 *dev, u8 cmd_code,
struct sk_buff *req,
pn533_send_async_complete_t complete_cb,
void *complete_cb_context)
{
struct pn533_cmd *cmd;
int rc = 0;
dev_dbg(dev->dev, "Sending command 0x%x\n", cmd_code);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
cmd->code = cmd_code;
cmd->req = req;
cmd->complete_cb = complete_cb;
cmd->complete_cb_context = complete_cb_context;
pn533_build_cmd_frame(dev, cmd_code, req);
mutex_lock(&dev->cmd_lock);
if (!dev->cmd_pending) {
dev->cmd = cmd;
rc = dev->phy_ops->send_frame(dev, req);
if (rc) {
dev->cmd = NULL;
goto error;
}
dev->cmd_pending = 1;
goto unlock;
}
dev_dbg(dev->dev, "%s Queueing command 0x%x\n",
__func__, cmd_code);
INIT_LIST_HEAD(&cmd->queue);
list_add_tail(&cmd->queue, &dev->cmd_queue);
goto unlock;
error:
kfree(cmd);
unlock:
mutex_unlock(&dev->cmd_lock);
return rc;
}
static int pn533_send_data_async(struct pn533 *dev, u8 cmd_code,
struct sk_buff *req,
pn533_send_async_complete_t complete_cb,
void *complete_cb_context)
{
int rc;
rc = __pn533_send_async(dev, cmd_code, req, complete_cb,
complete_cb_context);
return rc;
}
static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code,
struct sk_buff *req,
pn533_send_async_complete_t complete_cb,
void *complete_cb_context)
{
int rc;
rc = __pn533_send_async(dev, cmd_code, req, complete_cb,
complete_cb_context);
return rc;
}
/*
* pn533_send_cmd_direct_async
*
* The function sends a piority cmd directly to the chip omitting the cmd
* queue. It's intended to be used by chaining mechanism of received responses
* where the host has to request every single chunk of data before scheduling
* next cmd from the queue.
*/
static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code,
struct sk_buff *req,
pn533_send_async_complete_t complete_cb,
void *complete_cb_context)
{
struct pn533_cmd *cmd;
int rc;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
cmd->code = cmd_code;
cmd->req = req;
cmd->complete_cb = complete_cb;
cmd->complete_cb_context = complete_cb_context;
pn533_build_cmd_frame(dev, cmd_code, req);
dev->cmd = cmd;
rc = dev->phy_ops->send_frame(dev, req);
if (rc < 0) {
dev->cmd = NULL;
kfree(cmd);
}
return rc;
}
static void pn533_wq_cmd_complete(struct work_struct *work)
{
struct pn533 *dev = container_of(work, struct pn533, cmd_complete_work);
int rc;
rc = pn533_send_async_complete(dev);
if (rc != -EINPROGRESS)
queue_work(dev->wq, &dev->cmd_work);
}
NFC: Queue pn533 commands Instead of returning EBUSY when getting a command while another one is running, we queue them. Upon completion of the pending command, the next one is processed. Besides the fact that it simplifies the pn533 locking scheme, it also comes with the nice side effect of fixing the following warning: [ 82.274297] ===================================== [ 82.274297] [ BUG: bad unlock balance detected! ] [ 82.274298] 3.5.0-rc1+ #1 Not tainted [ 82.274299] ------------------------------------- [ 82.274300] kworker/u:1/16 is trying to release lock (&dev->cmd_lock) at: [ 82.274305] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274305] but there are no more locks to release! [ 82.274306] [ 82.274306] other info that might help us debug this: [ 82.274306] 2 locks held by kworker/u:1/16: [ 82.274311] #0: (pn533){.+.+..}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] #1: ((&dev->cmd_work)){+.+...}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] [ 82.274314] stack backtrace: [ 82.274315] Pid: 16, comm: kworker/u:1 Not tainted 3.5.0-rc1+ #1 [ 82.274315] Call Trace: [ 82.274317] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274321] [<ffffffff81059841>] print_unlock_inbalance_bug+0xda/0xe4 [ 82.274323] [<ffffffff8105c74c>] lock_release_non_nested+0xb2/0x232 [ 82.274325] [<ffffffff8105a61e>] ? mark_held_locks+0x6d/0x95 [ 82.274326] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274328] [<ffffffff81451105>] ? _raw_spin_unlock_irqrestore+0x40/0x5c [ 82.274329] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274330] [<ffffffff8105ca42>] lock_release+0x176/0x1ac [ 82.274333] [<ffffffff8123de14>] ? pn533_send_complete+0xa8/0xa8 [ 82.274334] [<ffffffff8144f1d6>] __mutex_unlock_slowpath+0xb0/0x117 [ 82.274336] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274337] [<ffffffff8123de65>] pn533_wq_cmd_complete+0x51/0x55 [ 82.274338] [<ffffffff8103a6db>] process_one_work+0x1a3/0x2e2 [ 82.274340] [<ffffffff8103a67d>] ? process_one_work+0x145/0x2e2 [ 82.274341] [<ffffffff8103b119>] worker_thread+0xcf/0x153 [ 82.274343] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274344] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274346] [<ffffffff8103eb11>] kthread+0x95/0x9d [ 82.274348] [<ffffffff81452ef4>] kernel_thread_helper+0x4/0x10 [ 82.274351] [<ffffffff81046561>] ? finish_task_switch+0x45/0xc3 [ 82.274352] [<ffffffff814514f0>] ? retint_restore_args+0x13/0x13 [ 82.274353] [<ffffffff8103ea7c>] ? __init_kthread_worker+0x55/0x55 [ 82.274354] [<ffffffff81452ef0>] ? gs_change+0x13/0x13 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-18 04:47:54 +07:00
static void pn533_wq_cmd(struct work_struct *work)
{
struct pn533 *dev = container_of(work, struct pn533, cmd_work);
struct pn533_cmd *cmd;
int rc;
NFC: Queue pn533 commands Instead of returning EBUSY when getting a command while another one is running, we queue them. Upon completion of the pending command, the next one is processed. Besides the fact that it simplifies the pn533 locking scheme, it also comes with the nice side effect of fixing the following warning: [ 82.274297] ===================================== [ 82.274297] [ BUG: bad unlock balance detected! ] [ 82.274298] 3.5.0-rc1+ #1 Not tainted [ 82.274299] ------------------------------------- [ 82.274300] kworker/u:1/16 is trying to release lock (&dev->cmd_lock) at: [ 82.274305] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274305] but there are no more locks to release! [ 82.274306] [ 82.274306] other info that might help us debug this: [ 82.274306] 2 locks held by kworker/u:1/16: [ 82.274311] #0: (pn533){.+.+..}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] #1: ((&dev->cmd_work)){+.+...}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] [ 82.274314] stack backtrace: [ 82.274315] Pid: 16, comm: kworker/u:1 Not tainted 3.5.0-rc1+ #1 [ 82.274315] Call Trace: [ 82.274317] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274321] [<ffffffff81059841>] print_unlock_inbalance_bug+0xda/0xe4 [ 82.274323] [<ffffffff8105c74c>] lock_release_non_nested+0xb2/0x232 [ 82.274325] [<ffffffff8105a61e>] ? mark_held_locks+0x6d/0x95 [ 82.274326] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274328] [<ffffffff81451105>] ? _raw_spin_unlock_irqrestore+0x40/0x5c [ 82.274329] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274330] [<ffffffff8105ca42>] lock_release+0x176/0x1ac [ 82.274333] [<ffffffff8123de14>] ? pn533_send_complete+0xa8/0xa8 [ 82.274334] [<ffffffff8144f1d6>] __mutex_unlock_slowpath+0xb0/0x117 [ 82.274336] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274337] [<ffffffff8123de65>] pn533_wq_cmd_complete+0x51/0x55 [ 82.274338] [<ffffffff8103a6db>] process_one_work+0x1a3/0x2e2 [ 82.274340] [<ffffffff8103a67d>] ? process_one_work+0x145/0x2e2 [ 82.274341] [<ffffffff8103b119>] worker_thread+0xcf/0x153 [ 82.274343] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274344] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274346] [<ffffffff8103eb11>] kthread+0x95/0x9d [ 82.274348] [<ffffffff81452ef4>] kernel_thread_helper+0x4/0x10 [ 82.274351] [<ffffffff81046561>] ? finish_task_switch+0x45/0xc3 [ 82.274352] [<ffffffff814514f0>] ? retint_restore_args+0x13/0x13 [ 82.274353] [<ffffffff8103ea7c>] ? __init_kthread_worker+0x55/0x55 [ 82.274354] [<ffffffff81452ef0>] ? gs_change+0x13/0x13 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-18 04:47:54 +07:00
mutex_lock(&dev->cmd_lock);
if (list_empty(&dev->cmd_queue)) {
dev->cmd_pending = 0;
mutex_unlock(&dev->cmd_lock);
return;
}
cmd = list_first_entry(&dev->cmd_queue, struct pn533_cmd, queue);
list_del(&cmd->queue);
NFC: Queue pn533 commands Instead of returning EBUSY when getting a command while another one is running, we queue them. Upon completion of the pending command, the next one is processed. Besides the fact that it simplifies the pn533 locking scheme, it also comes with the nice side effect of fixing the following warning: [ 82.274297] ===================================== [ 82.274297] [ BUG: bad unlock balance detected! ] [ 82.274298] 3.5.0-rc1+ #1 Not tainted [ 82.274299] ------------------------------------- [ 82.274300] kworker/u:1/16 is trying to release lock (&dev->cmd_lock) at: [ 82.274305] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274305] but there are no more locks to release! [ 82.274306] [ 82.274306] other info that might help us debug this: [ 82.274306] 2 locks held by kworker/u:1/16: [ 82.274311] #0: (pn533){.+.+..}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] #1: ((&dev->cmd_work)){+.+...}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] [ 82.274314] stack backtrace: [ 82.274315] Pid: 16, comm: kworker/u:1 Not tainted 3.5.0-rc1+ #1 [ 82.274315] Call Trace: [ 82.274317] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274321] [<ffffffff81059841>] print_unlock_inbalance_bug+0xda/0xe4 [ 82.274323] [<ffffffff8105c74c>] lock_release_non_nested+0xb2/0x232 [ 82.274325] [<ffffffff8105a61e>] ? mark_held_locks+0x6d/0x95 [ 82.274326] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274328] [<ffffffff81451105>] ? _raw_spin_unlock_irqrestore+0x40/0x5c [ 82.274329] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274330] [<ffffffff8105ca42>] lock_release+0x176/0x1ac [ 82.274333] [<ffffffff8123de14>] ? pn533_send_complete+0xa8/0xa8 [ 82.274334] [<ffffffff8144f1d6>] __mutex_unlock_slowpath+0xb0/0x117 [ 82.274336] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274337] [<ffffffff8123de65>] pn533_wq_cmd_complete+0x51/0x55 [ 82.274338] [<ffffffff8103a6db>] process_one_work+0x1a3/0x2e2 [ 82.274340] [<ffffffff8103a67d>] ? process_one_work+0x145/0x2e2 [ 82.274341] [<ffffffff8103b119>] worker_thread+0xcf/0x153 [ 82.274343] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274344] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274346] [<ffffffff8103eb11>] kthread+0x95/0x9d [ 82.274348] [<ffffffff81452ef4>] kernel_thread_helper+0x4/0x10 [ 82.274351] [<ffffffff81046561>] ? finish_task_switch+0x45/0xc3 [ 82.274352] [<ffffffff814514f0>] ? retint_restore_args+0x13/0x13 [ 82.274353] [<ffffffff8103ea7c>] ? __init_kthread_worker+0x55/0x55 [ 82.274354] [<ffffffff81452ef0>] ? gs_change+0x13/0x13 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-18 04:47:54 +07:00
mutex_unlock(&dev->cmd_lock);
dev->cmd = cmd;
rc = dev->phy_ops->send_frame(dev, cmd->req);
if (rc < 0) {
dev->cmd = NULL;
dev_kfree_skb(cmd->req);
kfree(cmd);
return;
}
NFC: Queue pn533 commands Instead of returning EBUSY when getting a command while another one is running, we queue them. Upon completion of the pending command, the next one is processed. Besides the fact that it simplifies the pn533 locking scheme, it also comes with the nice side effect of fixing the following warning: [ 82.274297] ===================================== [ 82.274297] [ BUG: bad unlock balance detected! ] [ 82.274298] 3.5.0-rc1+ #1 Not tainted [ 82.274299] ------------------------------------- [ 82.274300] kworker/u:1/16 is trying to release lock (&dev->cmd_lock) at: [ 82.274305] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274305] but there are no more locks to release! [ 82.274306] [ 82.274306] other info that might help us debug this: [ 82.274306] 2 locks held by kworker/u:1/16: [ 82.274311] #0: (pn533){.+.+..}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] #1: ((&dev->cmd_work)){+.+...}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] [ 82.274314] stack backtrace: [ 82.274315] Pid: 16, comm: kworker/u:1 Not tainted 3.5.0-rc1+ #1 [ 82.274315] Call Trace: [ 82.274317] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274321] [<ffffffff81059841>] print_unlock_inbalance_bug+0xda/0xe4 [ 82.274323] [<ffffffff8105c74c>] lock_release_non_nested+0xb2/0x232 [ 82.274325] [<ffffffff8105a61e>] ? mark_held_locks+0x6d/0x95 [ 82.274326] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274328] [<ffffffff81451105>] ? _raw_spin_unlock_irqrestore+0x40/0x5c [ 82.274329] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274330] [<ffffffff8105ca42>] lock_release+0x176/0x1ac [ 82.274333] [<ffffffff8123de14>] ? pn533_send_complete+0xa8/0xa8 [ 82.274334] [<ffffffff8144f1d6>] __mutex_unlock_slowpath+0xb0/0x117 [ 82.274336] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274337] [<ffffffff8123de65>] pn533_wq_cmd_complete+0x51/0x55 [ 82.274338] [<ffffffff8103a6db>] process_one_work+0x1a3/0x2e2 [ 82.274340] [<ffffffff8103a67d>] ? process_one_work+0x145/0x2e2 [ 82.274341] [<ffffffff8103b119>] worker_thread+0xcf/0x153 [ 82.274343] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274344] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274346] [<ffffffff8103eb11>] kthread+0x95/0x9d [ 82.274348] [<ffffffff81452ef4>] kernel_thread_helper+0x4/0x10 [ 82.274351] [<ffffffff81046561>] ? finish_task_switch+0x45/0xc3 [ 82.274352] [<ffffffff814514f0>] ? retint_restore_args+0x13/0x13 [ 82.274353] [<ffffffff8103ea7c>] ? __init_kthread_worker+0x55/0x55 [ 82.274354] [<ffffffff81452ef0>] ? gs_change+0x13/0x13 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-18 04:47:54 +07:00
}
struct pn533_sync_cmd_response {
struct sk_buff *resp;
struct completion done;
};
static int pn533_send_sync_complete(struct pn533 *dev, void *_arg,
struct sk_buff *resp)
{
struct pn533_sync_cmd_response *arg = _arg;
arg->resp = resp;
complete(&arg->done);
return 0;
}
/* pn533_send_cmd_sync
*
* Please note the req parameter is freed inside the function to
* limit a number of return value interpretations by the caller.
*
* 1. negative in case of error during TX path -> req should be freed
*
* 2. negative in case of error during RX path -> req should not be freed
* as it's been already freed at the beginning of RX path by
* async_complete_cb.
*
* 3. valid pointer in case of succesfult RX path
*
* A caller has to check a return value with IS_ERR macro. If the test pass,
* the returned pointer is valid.
*
*/
static struct sk_buff *pn533_send_cmd_sync(struct pn533 *dev, u8 cmd_code,
struct sk_buff *req)
{
int rc;
struct pn533_sync_cmd_response arg;
init_completion(&arg.done);
rc = pn533_send_cmd_async(dev, cmd_code, req,
pn533_send_sync_complete, &arg);
if (rc) {
dev_kfree_skb(req);
return ERR_PTR(rc);
}
wait_for_completion(&arg.done);
return arg.resp;
}
static struct sk_buff *pn533_alloc_skb(struct pn533 *dev, unsigned int size)
{
struct sk_buff *skb;
skb = alloc_skb(dev->ops->tx_header_len +
size +
dev->ops->tx_tail_len, GFP_KERNEL);
if (skb)
skb_reserve(skb, dev->ops->tx_header_len);
return skb;
}
struct pn533_target_type_a {
__be16 sens_res;
u8 sel_res;
u8 nfcid_len;
u8 nfcid_data[];
} __packed;
#define PN533_TYPE_A_SENS_RES_NFCID1(x) ((u8)((be16_to_cpu(x) & 0x00C0) >> 6))
#define PN533_TYPE_A_SENS_RES_SSD(x) ((u8)((be16_to_cpu(x) & 0x001F) >> 0))
#define PN533_TYPE_A_SENS_RES_PLATCONF(x) ((u8)((be16_to_cpu(x) & 0x0F00) >> 8))
#define PN533_TYPE_A_SENS_RES_SSD_JEWEL 0x00
#define PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL 0x0C
#define PN533_TYPE_A_SEL_PROT(x) (((x) & 0x60) >> 5)
#define PN533_TYPE_A_SEL_CASCADE(x) (((x) & 0x04) >> 2)
#define PN533_TYPE_A_SEL_PROT_MIFARE 0
#define PN533_TYPE_A_SEL_PROT_ISO14443 1
#define PN533_TYPE_A_SEL_PROT_DEP 2
#define PN533_TYPE_A_SEL_PROT_ISO14443_DEP 3
static bool pn533_target_type_a_is_valid(struct pn533_target_type_a *type_a,
int target_data_len)
{
u8 ssd;
u8 platconf;
if (target_data_len < sizeof(struct pn533_target_type_a))
return false;
/*
* The length check of nfcid[] and ats[] are not being performed because
* the values are not being used
*/
/* Requirement 4.6.3.3 from NFC Forum Digital Spec */
ssd = PN533_TYPE_A_SENS_RES_SSD(type_a->sens_res);
platconf = PN533_TYPE_A_SENS_RES_PLATCONF(type_a->sens_res);
if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL &&
platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) ||
(ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL &&
platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL))
return false;
/* Requirements 4.8.2.1, 4.8.2.3, 4.8.2.5 and 4.8.2.7 from NFC Forum */
if (PN533_TYPE_A_SEL_CASCADE(type_a->sel_res) != 0)
return false;
return true;
}
static int pn533_target_found_type_a(struct nfc_target *nfc_tgt, u8 *tgt_data,
int tgt_data_len)
{
struct pn533_target_type_a *tgt_type_a;
tgt_type_a = (struct pn533_target_type_a *)tgt_data;
if (!pn533_target_type_a_is_valid(tgt_type_a, tgt_data_len))
return -EPROTO;
switch (PN533_TYPE_A_SEL_PROT(tgt_type_a->sel_res)) {
case PN533_TYPE_A_SEL_PROT_MIFARE:
nfc_tgt->supported_protocols = NFC_PROTO_MIFARE_MASK;
break;
case PN533_TYPE_A_SEL_PROT_ISO14443:
nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_MASK;
break;
case PN533_TYPE_A_SEL_PROT_DEP:
nfc_tgt->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
break;
case PN533_TYPE_A_SEL_PROT_ISO14443_DEP:
nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_MASK |
NFC_PROTO_NFC_DEP_MASK;
break;
}
nfc_tgt->sens_res = be16_to_cpu(tgt_type_a->sens_res);
nfc_tgt->sel_res = tgt_type_a->sel_res;
nfc_tgt->nfcid1_len = tgt_type_a->nfcid_len;
memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len);
return 0;
}
struct pn533_target_felica {
u8 pol_res;
u8 opcode;
u8 nfcid2[NFC_NFCID2_MAXSIZE];
u8 pad[8];
/* optional */
u8 syst_code[];
} __packed;
#define PN533_FELICA_SENSF_NFCID2_DEP_B1 0x01
#define PN533_FELICA_SENSF_NFCID2_DEP_B2 0xFE
static bool pn533_target_felica_is_valid(struct pn533_target_felica *felica,
int target_data_len)
{
if (target_data_len < sizeof(struct pn533_target_felica))
return false;
if (felica->opcode != PN533_FELICA_OPC_SENSF_RES)
return false;
return true;
}
static int pn533_target_found_felica(struct nfc_target *nfc_tgt, u8 *tgt_data,
int tgt_data_len)
{
struct pn533_target_felica *tgt_felica;
tgt_felica = (struct pn533_target_felica *)tgt_data;
if (!pn533_target_felica_is_valid(tgt_felica, tgt_data_len))
return -EPROTO;
if ((tgt_felica->nfcid2[0] == PN533_FELICA_SENSF_NFCID2_DEP_B1) &&
(tgt_felica->nfcid2[1] == PN533_FELICA_SENSF_NFCID2_DEP_B2))
nfc_tgt->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
else
nfc_tgt->supported_protocols = NFC_PROTO_FELICA_MASK;
memcpy(nfc_tgt->sensf_res, &tgt_felica->opcode, 9);
nfc_tgt->sensf_res_len = 9;
memcpy(nfc_tgt->nfcid2, tgt_felica->nfcid2, NFC_NFCID2_MAXSIZE);
nfc_tgt->nfcid2_len = NFC_NFCID2_MAXSIZE;
return 0;
}
struct pn533_target_jewel {
__be16 sens_res;
u8 jewelid[4];
} __packed;
static bool pn533_target_jewel_is_valid(struct pn533_target_jewel *jewel,
int target_data_len)
{
u8 ssd;
u8 platconf;
if (target_data_len < sizeof(struct pn533_target_jewel))
return false;
/* Requirement 4.6.3.3 from NFC Forum Digital Spec */
ssd = PN533_TYPE_A_SENS_RES_SSD(jewel->sens_res);
platconf = PN533_TYPE_A_SENS_RES_PLATCONF(jewel->sens_res);
if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL &&
platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) ||
(ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL &&
platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL))
return false;
return true;
}
static int pn533_target_found_jewel(struct nfc_target *nfc_tgt, u8 *tgt_data,
int tgt_data_len)
{
struct pn533_target_jewel *tgt_jewel;
tgt_jewel = (struct pn533_target_jewel *)tgt_data;
if (!pn533_target_jewel_is_valid(tgt_jewel, tgt_data_len))
return -EPROTO;
nfc_tgt->supported_protocols = NFC_PROTO_JEWEL_MASK;
nfc_tgt->sens_res = be16_to_cpu(tgt_jewel->sens_res);
nfc_tgt->nfcid1_len = 4;
memcpy(nfc_tgt->nfcid1, tgt_jewel->jewelid, nfc_tgt->nfcid1_len);
return 0;
}
struct pn533_type_b_prot_info {
u8 bitrate;
u8 fsci_type;
u8 fwi_adc_fo;
} __packed;
#define PN533_TYPE_B_PROT_FCSI(x) (((x) & 0xF0) >> 4)
#define PN533_TYPE_B_PROT_TYPE(x) (((x) & 0x0F) >> 0)
#define PN533_TYPE_B_PROT_TYPE_RFU_MASK 0x8
struct pn533_type_b_sens_res {
u8 opcode;
u8 nfcid[4];
u8 appdata[4];
struct pn533_type_b_prot_info prot_info;
} __packed;
#define PN533_TYPE_B_OPC_SENSB_RES 0x50
struct pn533_target_type_b {
struct pn533_type_b_sens_res sensb_res;
u8 attrib_res_len;
u8 attrib_res[];
} __packed;
static bool pn533_target_type_b_is_valid(struct pn533_target_type_b *type_b,
int target_data_len)
{
if (target_data_len < sizeof(struct pn533_target_type_b))
return false;
if (type_b->sensb_res.opcode != PN533_TYPE_B_OPC_SENSB_RES)
return false;
if (PN533_TYPE_B_PROT_TYPE(type_b->sensb_res.prot_info.fsci_type) &
PN533_TYPE_B_PROT_TYPE_RFU_MASK)
return false;
return true;
}
static int pn533_target_found_type_b(struct nfc_target *nfc_tgt, u8 *tgt_data,
int tgt_data_len)
{
struct pn533_target_type_b *tgt_type_b;
tgt_type_b = (struct pn533_target_type_b *)tgt_data;
if (!pn533_target_type_b_is_valid(tgt_type_b, tgt_data_len))
return -EPROTO;
nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_B_MASK;
return 0;
}
static void pn533_poll_reset_mod_list(struct pn533 *dev);
static int pn533_target_found(struct pn533 *dev, u8 tg, u8 *tgdata,
int tgdata_len)
{
struct nfc_target nfc_tgt;
int rc;
dev_dbg(dev->dev, "%s: modulation=%d\n",
__func__, dev->poll_mod_curr);
if (tg != 1)
return -EPROTO;
memset(&nfc_tgt, 0, sizeof(struct nfc_target));
switch (dev->poll_mod_curr) {
case PN533_POLL_MOD_106KBPS_A:
rc = pn533_target_found_type_a(&nfc_tgt, tgdata, tgdata_len);
break;
case PN533_POLL_MOD_212KBPS_FELICA:
case PN533_POLL_MOD_424KBPS_FELICA:
rc = pn533_target_found_felica(&nfc_tgt, tgdata, tgdata_len);
break;
case PN533_POLL_MOD_106KBPS_JEWEL:
rc = pn533_target_found_jewel(&nfc_tgt, tgdata, tgdata_len);
break;
case PN533_POLL_MOD_847KBPS_B:
rc = pn533_target_found_type_b(&nfc_tgt, tgdata, tgdata_len);
break;
default:
nfc_err(dev->dev,
"Unknown current poll modulation\n");
return -EPROTO;
}
if (rc)
return rc;
if (!(nfc_tgt.supported_protocols & dev->poll_protocols)) {
dev_dbg(dev->dev,
"The Tg found doesn't have the desired protocol\n");
return -EAGAIN;
}
dev_dbg(dev->dev,
"Target found - supported protocols: 0x%x\n",
nfc_tgt.supported_protocols);
dev->tgt_available_prots = nfc_tgt.supported_protocols;
pn533_poll_reset_mod_list(dev);
nfc_targets_found(dev->nfc_dev, &nfc_tgt, 1);
return 0;
}
static inline void pn533_poll_next_mod(struct pn533 *dev)
{
dev->poll_mod_curr = (dev->poll_mod_curr + 1) % dev->poll_mod_count;
}
static void pn533_poll_reset_mod_list(struct pn533 *dev)
{
dev->poll_mod_count = 0;
}
static void pn533_poll_add_mod(struct pn533 *dev, u8 mod_index)
{
dev->poll_mod_active[dev->poll_mod_count] =
(struct pn533_poll_modulations *)&poll_mod[mod_index];
dev->poll_mod_count++;
}
static void pn533_poll_create_mod_list(struct pn533 *dev,
u32 im_protocols, u32 tm_protocols)
{
pn533_poll_reset_mod_list(dev);
if ((im_protocols & NFC_PROTO_MIFARE_MASK) ||
(im_protocols & NFC_PROTO_ISO14443_MASK) ||
(im_protocols & NFC_PROTO_NFC_DEP_MASK))
pn533_poll_add_mod(dev, PN533_POLL_MOD_106KBPS_A);
if (im_protocols & NFC_PROTO_FELICA_MASK ||
im_protocols & NFC_PROTO_NFC_DEP_MASK) {
pn533_poll_add_mod(dev, PN533_POLL_MOD_212KBPS_FELICA);
pn533_poll_add_mod(dev, PN533_POLL_MOD_424KBPS_FELICA);
}
if (im_protocols & NFC_PROTO_JEWEL_MASK)
pn533_poll_add_mod(dev, PN533_POLL_MOD_106KBPS_JEWEL);
if (im_protocols & NFC_PROTO_ISO14443_B_MASK)
pn533_poll_add_mod(dev, PN533_POLL_MOD_847KBPS_B);
if (tm_protocols)
pn533_poll_add_mod(dev, PN533_LISTEN_MOD);
}
static int pn533_start_poll_complete(struct pn533 *dev, struct sk_buff *resp)
{
u8 nbtg, tg, *tgdata;
int rc, tgdata_len;
/* Toggle the DEP polling */
if (dev->poll_protocols & NFC_PROTO_NFC_DEP_MASK)
dev->poll_dep = 1;
nbtg = resp->data[0];
tg = resp->data[1];
tgdata = &resp->data[2];
tgdata_len = resp->len - 2; /* nbtg + tg */
if (nbtg) {
rc = pn533_target_found(dev, tg, tgdata, tgdata_len);
/* We must stop the poll after a valid target found */
if (rc == 0)
return 0;
}
return -EAGAIN;
}
static struct sk_buff *pn533_alloc_poll_tg_frame(struct pn533 *dev)
{
struct sk_buff *skb;
u8 *felica, *nfcid3, *gb;
u8 *gbytes = dev->gb;
size_t gbytes_len = dev->gb_len;
u8 felica_params[18] = {0x1, 0xfe, /* DEP */
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, /* random */
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0xff, 0xff}; /* System code */
u8 mifare_params[6] = {0x1, 0x1, /* SENS_RES */
0x0, 0x0, 0x0,
0x40}; /* SEL_RES for DEP */
unsigned int skb_len = 36 + /*
* mode (1), mifare (6),
* felica (18), nfcid3 (10), gb_len (1)
*/
gbytes_len +
1; /* len Tk*/
skb = pn533_alloc_skb(dev, skb_len);
if (!skb)
return NULL;
/* DEP support only */
*skb_put(skb, 1) = PN533_INIT_TARGET_DEP;
/* MIFARE params */
memcpy(skb_put(skb, 6), mifare_params, 6);
/* Felica params */
felica = skb_put(skb, 18);
memcpy(felica, felica_params, 18);
get_random_bytes(felica + 2, 6);
/* NFCID3 */
nfcid3 = skb_put(skb, 10);
memset(nfcid3, 0, 10);
memcpy(nfcid3, felica, 8);
/* General bytes */
*skb_put(skb, 1) = gbytes_len;
gb = skb_put(skb, gbytes_len);
memcpy(gb, gbytes, gbytes_len);
/* Len Tk */
*skb_put(skb, 1) = 0;
return skb;
}
static void pn533_wq_tm_mi_recv(struct work_struct *work);
static struct sk_buff *pn533_build_response(struct pn533 *dev);
static int pn533_tm_get_data_complete(struct pn533 *dev, void *arg,
struct sk_buff *resp)
{
struct sk_buff *skb;
u8 status, ret, mi;
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
if (IS_ERR(resp)) {
skb_queue_purge(&dev->resp_q);
return PTR_ERR(resp);
}
status = resp->data[0];
ret = status & PN533_CMD_RET_MASK;
mi = status & PN533_CMD_MI_MASK;
skb_pull(resp, sizeof(status));
if (ret != PN533_CMD_RET_SUCCESS) {
rc = -EIO;
goto error;
}
skb_queue_tail(&dev->resp_q, resp);
if (mi) {
queue_work(dev->wq, &dev->mi_tm_rx_work);
return -EINPROGRESS;
}
skb = pn533_build_response(dev);
if (!skb) {
rc = -EIO;
goto error;
}
return nfc_tm_data_received(dev->nfc_dev, skb);
error:
nfc_tm_deactivated(dev->nfc_dev);
dev->tgt_mode = 0;
skb_queue_purge(&dev->resp_q);
dev_kfree_skb(resp);
return rc;
}
static void pn533_wq_tm_mi_recv(struct work_struct *work)
{
struct pn533 *dev = container_of(work, struct pn533, mi_tm_rx_work);
struct sk_buff *skb;
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
skb = pn533_alloc_skb(dev, 0);
if (!skb)
return;
rc = pn533_send_cmd_direct_async(dev,
PN533_CMD_TG_GET_DATA,
skb,
pn533_tm_get_data_complete,
NULL);
if (rc < 0)
dev_kfree_skb(skb);
}
static int pn533_tm_send_complete(struct pn533 *dev, void *arg,
struct sk_buff *resp);
static void pn533_wq_tm_mi_send(struct work_struct *work)
{
struct pn533 *dev = container_of(work, struct pn533, mi_tm_tx_work);
struct sk_buff *skb;
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
/* Grab the first skb in the queue */
skb = skb_dequeue(&dev->fragment_skb);
if (skb == NULL) { /* No more data */
/* Reset the queue for future use */
skb_queue_head_init(&dev->fragment_skb);
goto error;
}
/* last entry - remove MI bit */
if (skb_queue_len(&dev->fragment_skb) == 0) {
rc = pn533_send_cmd_direct_async(dev, PN533_CMD_TG_SET_DATA,
skb, pn533_tm_send_complete, NULL);
} else
rc = pn533_send_cmd_direct_async(dev,
PN533_CMD_TG_SET_META_DATA,
skb, pn533_tm_send_complete, NULL);
if (rc == 0) /* success */
return;
dev_err(dev->dev,
"Error %d when trying to perform set meta data_exchange", rc);
dev_kfree_skb(skb);
error:
dev->phy_ops->send_ack(dev, GFP_KERNEL);
queue_work(dev->wq, &dev->cmd_work);
}
static void pn533_wq_tg_get_data(struct work_struct *work)
{
struct pn533 *dev = container_of(work, struct pn533, tg_work);
struct sk_buff *skb;
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
skb = pn533_alloc_skb(dev, 0);
if (!skb)
return;
rc = pn533_send_data_async(dev, PN533_CMD_TG_GET_DATA, skb,
pn533_tm_get_data_complete, NULL);
if (rc < 0)
dev_kfree_skb(skb);
}
#define ATR_REQ_GB_OFFSET 17
static int pn533_init_target_complete(struct pn533 *dev, struct sk_buff *resp)
{
u8 mode, *cmd, comm_mode = NFC_COMM_PASSIVE, *gb;
size_t gb_len;
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
if (resp->len < ATR_REQ_GB_OFFSET + 1)
return -EINVAL;
mode = resp->data[0];
cmd = &resp->data[1];
dev_dbg(dev->dev, "Target mode 0x%x len %d\n",
mode, resp->len);
if ((mode & PN533_INIT_TARGET_RESP_FRAME_MASK) ==
PN533_INIT_TARGET_RESP_ACTIVE)
comm_mode = NFC_COMM_ACTIVE;
if ((mode & PN533_INIT_TARGET_RESP_DEP) == 0) /* Only DEP supported */
return -EOPNOTSUPP;
gb = cmd + ATR_REQ_GB_OFFSET;
gb_len = resp->len - (ATR_REQ_GB_OFFSET + 1);
rc = nfc_tm_activated(dev->nfc_dev, NFC_PROTO_NFC_DEP_MASK,
comm_mode, gb, gb_len);
if (rc < 0) {
nfc_err(dev->dev,
"Error when signaling target activation\n");
return rc;
}
dev->tgt_mode = 1;
queue_work(dev->wq, &dev->tg_work);
return 0;
}
static void pn533_listen_mode_timer(unsigned long data)
{
struct pn533 *dev = (struct pn533 *)data;
dev_dbg(dev->dev, "Listen mode timeout\n");
dev->cancel_listen = 1;
pn533_poll_next_mod(dev);
queue_delayed_work(dev->wq, &dev->poll_work,
msecs_to_jiffies(PN533_POLL_INTERVAL));
}
static int pn533_rf_complete(struct pn533 *dev, void *arg,
struct sk_buff *resp)
{
int rc = 0;
dev_dbg(dev->dev, "%s\n", __func__);
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
nfc_err(dev->dev, "RF setting error %d\n", rc);
return rc;
}
queue_delayed_work(dev->wq, &dev->poll_work,
msecs_to_jiffies(PN533_POLL_INTERVAL));
dev_kfree_skb(resp);
return rc;
}
static void pn533_wq_rf(struct work_struct *work)
{
struct pn533 *dev = container_of(work, struct pn533, rf_work);
struct sk_buff *skb;
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
skb = pn533_alloc_skb(dev, 2);
if (!skb)
return;
*skb_put(skb, 1) = PN533_CFGITEM_RF_FIELD;
*skb_put(skb, 1) = PN533_CFGITEM_RF_FIELD_AUTO_RFCA;
rc = pn533_send_cmd_async(dev, PN533_CMD_RF_CONFIGURATION, skb,
pn533_rf_complete, NULL);
if (rc < 0) {
dev_kfree_skb(skb);
nfc_err(dev->dev, "RF setting error %d\n", rc);
}
}
static int pn533_poll_dep_complete(struct pn533 *dev, void *arg,
struct sk_buff *resp)
{
struct pn533_cmd_jump_dep_response *rsp;
struct nfc_target nfc_target;
u8 target_gt_len;
int rc;
if (IS_ERR(resp))
return PTR_ERR(resp);
rsp = (struct pn533_cmd_jump_dep_response *)resp->data;
rc = rsp->status & PN533_CMD_RET_MASK;
if (rc != PN533_CMD_RET_SUCCESS) {
/* Not target found, turn radio off */
queue_work(dev->wq, &dev->rf_work);
dev_kfree_skb(resp);
return 0;
}
dev_dbg(dev->dev, "Creating new target");
nfc_target.supported_protocols = NFC_PROTO_NFC_DEP_MASK;
nfc_target.nfcid1_len = 10;
memcpy(nfc_target.nfcid1, rsp->nfcid3t, nfc_target.nfcid1_len);
rc = nfc_targets_found(dev->nfc_dev, &nfc_target, 1);
if (rc)
goto error;
dev->tgt_available_prots = 0;
dev->tgt_active_prot = NFC_PROTO_NFC_DEP;
/* ATR_RES general bytes are located at offset 17 */
target_gt_len = resp->len - 17;
rc = nfc_set_remote_general_bytes(dev->nfc_dev,
rsp->gt, target_gt_len);
if (!rc) {
rc = nfc_dep_link_is_up(dev->nfc_dev,
dev->nfc_dev->targets[0].idx,
0, NFC_RF_INITIATOR);
if (!rc)
pn533_poll_reset_mod_list(dev);
}
error:
dev_kfree_skb(resp);
return rc;
}
#define PASSIVE_DATA_LEN 5
static int pn533_poll_dep(struct nfc_dev *nfc_dev)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
struct sk_buff *skb;
int rc, skb_len;
u8 *next, nfcid3[NFC_NFCID3_MAXSIZE];
u8 passive_data[PASSIVE_DATA_LEN] = {0x00, 0xff, 0xff, 0x00, 0x3};
dev_dbg(dev->dev, "%s", __func__);
if (!dev->gb) {
dev->gb = nfc_get_local_general_bytes(nfc_dev, &dev->gb_len);
if (!dev->gb || !dev->gb_len) {
dev->poll_dep = 0;
queue_work(dev->wq, &dev->rf_work);
}
}
skb_len = 3 + dev->gb_len; /* ActPass + BR + Next */
skb_len += PASSIVE_DATA_LEN;
/* NFCID3 */
skb_len += NFC_NFCID3_MAXSIZE;
nfcid3[0] = 0x1;
nfcid3[1] = 0xfe;
get_random_bytes(nfcid3 + 2, 6);
skb = pn533_alloc_skb(dev, skb_len);
if (!skb)
return -ENOMEM;
*skb_put(skb, 1) = 0x01; /* Active */
*skb_put(skb, 1) = 0x02; /* 424 kbps */
next = skb_put(skb, 1); /* Next */
*next = 0;
/* Copy passive data */
memcpy(skb_put(skb, PASSIVE_DATA_LEN), passive_data, PASSIVE_DATA_LEN);
*next |= 1;
/* Copy NFCID3 (which is NFCID2 from SENSF_RES) */
memcpy(skb_put(skb, NFC_NFCID3_MAXSIZE), nfcid3,
NFC_NFCID3_MAXSIZE);
*next |= 2;
memcpy(skb_put(skb, dev->gb_len), dev->gb, dev->gb_len);
*next |= 4; /* We have some Gi */
rc = pn533_send_cmd_async(dev, PN533_CMD_IN_JUMP_FOR_DEP, skb,
pn533_poll_dep_complete, NULL);
if (rc < 0)
dev_kfree_skb(skb);
return rc;
}
static int pn533_poll_complete(struct pn533 *dev, void *arg,
struct sk_buff *resp)
{
struct pn533_poll_modulations *cur_mod;
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
nfc_err(dev->dev, "%s Poll complete error %d\n",
__func__, rc);
if (rc == -ENOENT) {
if (dev->poll_mod_count != 0)
return rc;
goto stop_poll;
} else if (rc < 0) {
nfc_err(dev->dev,
"Error %d when running poll\n", rc);
goto stop_poll;
}
}
cur_mod = dev->poll_mod_active[dev->poll_mod_curr];
if (cur_mod->len == 0) { /* Target mode */
del_timer(&dev->listen_timer);
rc = pn533_init_target_complete(dev, resp);
goto done;
}
/* Initiator mode */
rc = pn533_start_poll_complete(dev, resp);
if (!rc)
goto done;
if (!dev->poll_mod_count) {
dev_dbg(dev->dev, "Polling has been stopped\n");
goto done;
}
pn533_poll_next_mod(dev);
/* Not target found, turn radio off */
queue_work(dev->wq, &dev->rf_work);
done:
dev_kfree_skb(resp);
return rc;
stop_poll:
nfc_err(dev->dev, "Polling operation has been stopped\n");
pn533_poll_reset_mod_list(dev);
dev->poll_protocols = 0;
return rc;
}
static struct sk_buff *pn533_alloc_poll_in_frame(struct pn533 *dev,
struct pn533_poll_modulations *mod)
{
struct sk_buff *skb;
skb = pn533_alloc_skb(dev, mod->len);
if (!skb)
return NULL;
memcpy(skb_put(skb, mod->len), &mod->data, mod->len);
return skb;
}
static int pn533_send_poll_frame(struct pn533 *dev)
{
struct pn533_poll_modulations *mod;
struct sk_buff *skb;
int rc;
u8 cmd_code;
mod = dev->poll_mod_active[dev->poll_mod_curr];
dev_dbg(dev->dev, "%s mod len %d\n",
__func__, mod->len);
if ((dev->poll_protocols & NFC_PROTO_NFC_DEP_MASK) && dev->poll_dep) {
dev->poll_dep = 0;
return pn533_poll_dep(dev->nfc_dev);
}
if (mod->len == 0) { /* Listen mode */
cmd_code = PN533_CMD_TG_INIT_AS_TARGET;
skb = pn533_alloc_poll_tg_frame(dev);
} else { /* Polling mode */
cmd_code = PN533_CMD_IN_LIST_PASSIVE_TARGET;
skb = pn533_alloc_poll_in_frame(dev, mod);
}
if (!skb) {
nfc_err(dev->dev, "Failed to allocate skb\n");
return -ENOMEM;
}
rc = pn533_send_cmd_async(dev, cmd_code, skb, pn533_poll_complete,
NULL);
if (rc < 0) {
dev_kfree_skb(skb);
nfc_err(dev->dev, "Polling loop error %d\n", rc);
}
return rc;
}
static void pn533_wq_poll(struct work_struct *work)
{
struct pn533 *dev = container_of(work, struct pn533, poll_work.work);
struct pn533_poll_modulations *cur_mod;
int rc;
cur_mod = dev->poll_mod_active[dev->poll_mod_curr];
dev_dbg(dev->dev,
"%s cancel_listen %d modulation len %d\n",
__func__, dev->cancel_listen, cur_mod->len);
if (dev->cancel_listen == 1) {
dev->cancel_listen = 0;
dev->phy_ops->abort_cmd(dev, GFP_ATOMIC);
}
rc = pn533_send_poll_frame(dev);
if (rc)
return;
if (cur_mod->len == 0 && dev->poll_mod_count > 1)
mod_timer(&dev->listen_timer, jiffies + PN533_LISTEN_TIME * HZ);
}
static int pn533_start_poll(struct nfc_dev *nfc_dev,
u32 im_protocols, u32 tm_protocols)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
struct pn533_poll_modulations *cur_mod;
u8 rand_mod;
int rc;
dev_dbg(dev->dev,
"%s: im protocols 0x%x tm protocols 0x%x\n",
__func__, im_protocols, tm_protocols);
if (dev->tgt_active_prot) {
nfc_err(dev->dev,
"Cannot poll with a target already activated\n");
return -EBUSY;
}
if (dev->tgt_mode) {
nfc_err(dev->dev,
"Cannot poll while already being activated\n");
return -EBUSY;
}
if (tm_protocols) {
dev->gb = nfc_get_local_general_bytes(nfc_dev, &dev->gb_len);
if (dev->gb == NULL)
tm_protocols = 0;
}
pn533_poll_create_mod_list(dev, im_protocols, tm_protocols);
dev->poll_protocols = im_protocols;
dev->listen_protocols = tm_protocols;
/* Do not always start polling from the same modulation */
get_random_bytes(&rand_mod, sizeof(rand_mod));
rand_mod %= dev->poll_mod_count;
dev->poll_mod_curr = rand_mod;
cur_mod = dev->poll_mod_active[dev->poll_mod_curr];
rc = pn533_send_poll_frame(dev);
/* Start listen timer */
if (!rc && cur_mod->len == 0 && dev->poll_mod_count > 1)
mod_timer(&dev->listen_timer, jiffies + PN533_LISTEN_TIME * HZ);
return rc;
}
static void pn533_stop_poll(struct nfc_dev *nfc_dev)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
del_timer(&dev->listen_timer);
if (!dev->poll_mod_count) {
dev_dbg(dev->dev,
"Polling operation was not running\n");
return;
}
dev->phy_ops->abort_cmd(dev, GFP_KERNEL);
flush_delayed_work(&dev->poll_work);
pn533_poll_reset_mod_list(dev);
}
static int pn533_activate_target_nfcdep(struct pn533 *dev)
{
struct pn533_cmd_activate_response *rsp;
u16 gt_len;
int rc;
struct sk_buff *skb;
struct sk_buff *resp;
dev_dbg(dev->dev, "%s\n", __func__);
skb = pn533_alloc_skb(dev, sizeof(u8) * 2); /*TG + Next*/
if (!skb)
return -ENOMEM;
*skb_put(skb, sizeof(u8)) = 1; /* TG */
*skb_put(skb, sizeof(u8)) = 0; /* Next */
resp = pn533_send_cmd_sync(dev, PN533_CMD_IN_ATR, skb);
if (IS_ERR(resp))
return PTR_ERR(resp);
rsp = (struct pn533_cmd_activate_response *)resp->data;
rc = rsp->status & PN533_CMD_RET_MASK;
if (rc != PN533_CMD_RET_SUCCESS) {
nfc_err(dev->dev,
"Target activation failed (error 0x%x)\n", rc);
dev_kfree_skb(resp);
return -EIO;
}
/* ATR_RES general bytes are located at offset 16 */
gt_len = resp->len - 16;
rc = nfc_set_remote_general_bytes(dev->nfc_dev, rsp->gt, gt_len);
dev_kfree_skb(resp);
return rc;
}
static int pn533_activate_target(struct nfc_dev *nfc_dev,
struct nfc_target *target, u32 protocol)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
int rc;
dev_dbg(dev->dev, "%s: protocol=%u\n", __func__, protocol);
if (dev->poll_mod_count) {
nfc_err(dev->dev,
"Cannot activate while polling\n");
return -EBUSY;
}
if (dev->tgt_active_prot) {
nfc_err(dev->dev,
"There is already an active target\n");
return -EBUSY;
}
if (!dev->tgt_available_prots) {
nfc_err(dev->dev,
"There is no available target to activate\n");
return -EINVAL;
}
if (!(dev->tgt_available_prots & (1 << protocol))) {
nfc_err(dev->dev,
"Target doesn't support requested proto %u\n",
protocol);
return -EINVAL;
}
if (protocol == NFC_PROTO_NFC_DEP) {
rc = pn533_activate_target_nfcdep(dev);
if (rc) {
nfc_err(dev->dev,
"Activating target with DEP failed %d\n", rc);
return rc;
}
}
dev->tgt_active_prot = protocol;
dev->tgt_available_prots = 0;
return 0;
}
NFC: pn533: Fix socket deadlock A deadlock can occur when the NFC raw socket is closed while the driver is processing a command. Following is the call graph of the affected situation: send data via raw_sock: ------------- rawsock_tx_work sock_hold => socket refcnt++ nfc_data_exchange => cb = rawsock_data_exchange_complete ops->im_transceive = pn533_transceive => arg->cb = db = rawsock_data_exchange_complete pn533_send_data_async => cb = pn533_data_exchange_complete __pn533_send_async => cmd->complete_cb = cb = pn533_data_exchange_complete if_ops->send_frame_async response: -------- pn533_recv_response queue_work(priv->wq, &priv->cmd_complete_work) pn533_wq_cmd_complete pn533_send_async_complete cmd->complete_cb() = pn533_data_exchange_complete() arg->cb() = rawsock_data_exchange_complete() sock_put => socket refcnt-- => If the corresponding socket gets closed in the meantime socket will be destructed sk_free __sk_free sk->sk_destruct = rawsock_destruct nfc_deactivate_target ops->deactivate_target = pn533_deactivate_target pn533_send_cmd_sync pn533_send_cmd_async __pn533_send_async list_add_tail(&cmd->queue,&dev->cmd_queue) => add to command list because a command is currently processed wait_for_completion => the workqueue thread waits here because it is the one processing the commands => deadlock To fix the deadlock pn533_deactivate_target is changed to issue the PN533_CMD_IN_RELEASE command in async mode. This way nothing blocks and the release command is executed after the current command. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-03-25 21:46:52 +07:00
static int pn533_deactivate_target_complete(struct pn533 *dev, void *arg,
struct sk_buff *resp)
{
int rc = 0;
dev_dbg(dev->dev, "%s\n", __func__);
NFC: pn533: Fix socket deadlock A deadlock can occur when the NFC raw socket is closed while the driver is processing a command. Following is the call graph of the affected situation: send data via raw_sock: ------------- rawsock_tx_work sock_hold => socket refcnt++ nfc_data_exchange => cb = rawsock_data_exchange_complete ops->im_transceive = pn533_transceive => arg->cb = db = rawsock_data_exchange_complete pn533_send_data_async => cb = pn533_data_exchange_complete __pn533_send_async => cmd->complete_cb = cb = pn533_data_exchange_complete if_ops->send_frame_async response: -------- pn533_recv_response queue_work(priv->wq, &priv->cmd_complete_work) pn533_wq_cmd_complete pn533_send_async_complete cmd->complete_cb() = pn533_data_exchange_complete() arg->cb() = rawsock_data_exchange_complete() sock_put => socket refcnt-- => If the corresponding socket gets closed in the meantime socket will be destructed sk_free __sk_free sk->sk_destruct = rawsock_destruct nfc_deactivate_target ops->deactivate_target = pn533_deactivate_target pn533_send_cmd_sync pn533_send_cmd_async __pn533_send_async list_add_tail(&cmd->queue,&dev->cmd_queue) => add to command list because a command is currently processed wait_for_completion => the workqueue thread waits here because it is the one processing the commands => deadlock To fix the deadlock pn533_deactivate_target is changed to issue the PN533_CMD_IN_RELEASE command in async mode. This way nothing blocks and the release command is executed after the current command. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-03-25 21:46:52 +07:00
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
nfc_err(dev->dev, "Target release error %d\n", rc);
NFC: pn533: Fix socket deadlock A deadlock can occur when the NFC raw socket is closed while the driver is processing a command. Following is the call graph of the affected situation: send data via raw_sock: ------------- rawsock_tx_work sock_hold => socket refcnt++ nfc_data_exchange => cb = rawsock_data_exchange_complete ops->im_transceive = pn533_transceive => arg->cb = db = rawsock_data_exchange_complete pn533_send_data_async => cb = pn533_data_exchange_complete __pn533_send_async => cmd->complete_cb = cb = pn533_data_exchange_complete if_ops->send_frame_async response: -------- pn533_recv_response queue_work(priv->wq, &priv->cmd_complete_work) pn533_wq_cmd_complete pn533_send_async_complete cmd->complete_cb() = pn533_data_exchange_complete() arg->cb() = rawsock_data_exchange_complete() sock_put => socket refcnt-- => If the corresponding socket gets closed in the meantime socket will be destructed sk_free __sk_free sk->sk_destruct = rawsock_destruct nfc_deactivate_target ops->deactivate_target = pn533_deactivate_target pn533_send_cmd_sync pn533_send_cmd_async __pn533_send_async list_add_tail(&cmd->queue,&dev->cmd_queue) => add to command list because a command is currently processed wait_for_completion => the workqueue thread waits here because it is the one processing the commands => deadlock To fix the deadlock pn533_deactivate_target is changed to issue the PN533_CMD_IN_RELEASE command in async mode. This way nothing blocks and the release command is executed after the current command. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-03-25 21:46:52 +07:00
return rc;
}
rc = resp->data[0] & PN533_CMD_RET_MASK;
if (rc != PN533_CMD_RET_SUCCESS)
nfc_err(dev->dev,
NFC: pn533: Fix socket deadlock A deadlock can occur when the NFC raw socket is closed while the driver is processing a command. Following is the call graph of the affected situation: send data via raw_sock: ------------- rawsock_tx_work sock_hold => socket refcnt++ nfc_data_exchange => cb = rawsock_data_exchange_complete ops->im_transceive = pn533_transceive => arg->cb = db = rawsock_data_exchange_complete pn533_send_data_async => cb = pn533_data_exchange_complete __pn533_send_async => cmd->complete_cb = cb = pn533_data_exchange_complete if_ops->send_frame_async response: -------- pn533_recv_response queue_work(priv->wq, &priv->cmd_complete_work) pn533_wq_cmd_complete pn533_send_async_complete cmd->complete_cb() = pn533_data_exchange_complete() arg->cb() = rawsock_data_exchange_complete() sock_put => socket refcnt-- => If the corresponding socket gets closed in the meantime socket will be destructed sk_free __sk_free sk->sk_destruct = rawsock_destruct nfc_deactivate_target ops->deactivate_target = pn533_deactivate_target pn533_send_cmd_sync pn533_send_cmd_async __pn533_send_async list_add_tail(&cmd->queue,&dev->cmd_queue) => add to command list because a command is currently processed wait_for_completion => the workqueue thread waits here because it is the one processing the commands => deadlock To fix the deadlock pn533_deactivate_target is changed to issue the PN533_CMD_IN_RELEASE command in async mode. This way nothing blocks and the release command is executed after the current command. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-03-25 21:46:52 +07:00
"Error 0x%x when releasing the target\n", rc);
dev_kfree_skb(resp);
return rc;
}
static void pn533_deactivate_target(struct nfc_dev *nfc_dev,
struct nfc_target *target, u8 mode)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
struct sk_buff *skb;
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
if (!dev->tgt_active_prot) {
nfc_err(dev->dev, "There is no active target\n");
return;
}
dev->tgt_active_prot = 0;
skb_queue_purge(&dev->resp_q);
skb = pn533_alloc_skb(dev, sizeof(u8));
if (!skb)
return;
*skb_put(skb, 1) = 1; /* TG*/
NFC: pn533: Fix socket deadlock A deadlock can occur when the NFC raw socket is closed while the driver is processing a command. Following is the call graph of the affected situation: send data via raw_sock: ------------- rawsock_tx_work sock_hold => socket refcnt++ nfc_data_exchange => cb = rawsock_data_exchange_complete ops->im_transceive = pn533_transceive => arg->cb = db = rawsock_data_exchange_complete pn533_send_data_async => cb = pn533_data_exchange_complete __pn533_send_async => cmd->complete_cb = cb = pn533_data_exchange_complete if_ops->send_frame_async response: -------- pn533_recv_response queue_work(priv->wq, &priv->cmd_complete_work) pn533_wq_cmd_complete pn533_send_async_complete cmd->complete_cb() = pn533_data_exchange_complete() arg->cb() = rawsock_data_exchange_complete() sock_put => socket refcnt-- => If the corresponding socket gets closed in the meantime socket will be destructed sk_free __sk_free sk->sk_destruct = rawsock_destruct nfc_deactivate_target ops->deactivate_target = pn533_deactivate_target pn533_send_cmd_sync pn533_send_cmd_async __pn533_send_async list_add_tail(&cmd->queue,&dev->cmd_queue) => add to command list because a command is currently processed wait_for_completion => the workqueue thread waits here because it is the one processing the commands => deadlock To fix the deadlock pn533_deactivate_target is changed to issue the PN533_CMD_IN_RELEASE command in async mode. This way nothing blocks and the release command is executed after the current command. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-03-25 21:46:52 +07:00
rc = pn533_send_cmd_async(dev, PN533_CMD_IN_RELEASE, skb,
pn533_deactivate_target_complete, NULL);
if (rc < 0) {
dev_kfree_skb(skb);
nfc_err(dev->dev, "Target release error %d\n", rc);
NFC: pn533: Fix socket deadlock A deadlock can occur when the NFC raw socket is closed while the driver is processing a command. Following is the call graph of the affected situation: send data via raw_sock: ------------- rawsock_tx_work sock_hold => socket refcnt++ nfc_data_exchange => cb = rawsock_data_exchange_complete ops->im_transceive = pn533_transceive => arg->cb = db = rawsock_data_exchange_complete pn533_send_data_async => cb = pn533_data_exchange_complete __pn533_send_async => cmd->complete_cb = cb = pn533_data_exchange_complete if_ops->send_frame_async response: -------- pn533_recv_response queue_work(priv->wq, &priv->cmd_complete_work) pn533_wq_cmd_complete pn533_send_async_complete cmd->complete_cb() = pn533_data_exchange_complete() arg->cb() = rawsock_data_exchange_complete() sock_put => socket refcnt-- => If the corresponding socket gets closed in the meantime socket will be destructed sk_free __sk_free sk->sk_destruct = rawsock_destruct nfc_deactivate_target ops->deactivate_target = pn533_deactivate_target pn533_send_cmd_sync pn533_send_cmd_async __pn533_send_async list_add_tail(&cmd->queue,&dev->cmd_queue) => add to command list because a command is currently processed wait_for_completion => the workqueue thread waits here because it is the one processing the commands => deadlock To fix the deadlock pn533_deactivate_target is changed to issue the PN533_CMD_IN_RELEASE command in async mode. This way nothing blocks and the release command is executed after the current command. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-03-25 21:46:52 +07:00
}
}
static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg,
struct sk_buff *resp)
{
struct pn533_cmd_jump_dep_response *rsp;
u8 target_gt_len;
int rc;
u8 active = *(u8 *)arg;
kfree(arg);
if (IS_ERR(resp))
return PTR_ERR(resp);
if (dev->tgt_available_prots &&
!(dev->tgt_available_prots & (1 << NFC_PROTO_NFC_DEP))) {
nfc_err(dev->dev,
"The target does not support DEP\n");
rc = -EINVAL;
goto error;
}
rsp = (struct pn533_cmd_jump_dep_response *)resp->data;
rc = rsp->status & PN533_CMD_RET_MASK;
if (rc != PN533_CMD_RET_SUCCESS) {
nfc_err(dev->dev,
"Bringing DEP link up failed (error 0x%x)\n", rc);
goto error;
}
if (!dev->tgt_available_prots) {
struct nfc_target nfc_target;
dev_dbg(dev->dev, "Creating new target\n");
nfc_target.supported_protocols = NFC_PROTO_NFC_DEP_MASK;
nfc_target.nfcid1_len = 10;
memcpy(nfc_target.nfcid1, rsp->nfcid3t, nfc_target.nfcid1_len);
rc = nfc_targets_found(dev->nfc_dev, &nfc_target, 1);
if (rc)
goto error;
dev->tgt_available_prots = 0;
}
dev->tgt_active_prot = NFC_PROTO_NFC_DEP;
/* ATR_RES general bytes are located at offset 17 */
target_gt_len = resp->len - 17;
rc = nfc_set_remote_general_bytes(dev->nfc_dev,
rsp->gt, target_gt_len);
if (rc == 0)
rc = nfc_dep_link_is_up(dev->nfc_dev,
dev->nfc_dev->targets[0].idx,
!active, NFC_RF_INITIATOR);
error:
dev_kfree_skb(resp);
return rc;
}
static int pn533_rf_field(struct nfc_dev *nfc_dev, u8 rf);
static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target,
u8 comm_mode, u8 *gb, size_t gb_len)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
struct sk_buff *skb;
int rc, skb_len;
u8 *next, *arg, nfcid3[NFC_NFCID3_MAXSIZE];
u8 passive_data[PASSIVE_DATA_LEN] = {0x00, 0xff, 0xff, 0x00, 0x3};
dev_dbg(dev->dev, "%s\n", __func__);
if (dev->poll_mod_count) {
nfc_err(dev->dev,
"Cannot bring the DEP link up while polling\n");
return -EBUSY;
}
if (dev->tgt_active_prot) {
nfc_err(dev->dev,
"There is already an active target\n");
return -EBUSY;
}
skb_len = 3 + gb_len; /* ActPass + BR + Next */
skb_len += PASSIVE_DATA_LEN;
/* NFCID3 */
skb_len += NFC_NFCID3_MAXSIZE;
if (target && !target->nfcid2_len) {
nfcid3[0] = 0x1;
nfcid3[1] = 0xfe;
get_random_bytes(nfcid3 + 2, 6);
}
skb = pn533_alloc_skb(dev, skb_len);
if (!skb)
return -ENOMEM;
*skb_put(skb, 1) = !comm_mode; /* ActPass */
*skb_put(skb, 1) = 0x02; /* 424 kbps */
next = skb_put(skb, 1); /* Next */
*next = 0;
/* Copy passive data */
memcpy(skb_put(skb, PASSIVE_DATA_LEN), passive_data, PASSIVE_DATA_LEN);
*next |= 1;
/* Copy NFCID3 (which is NFCID2 from SENSF_RES) */
if (target && target->nfcid2_len)
memcpy(skb_put(skb, NFC_NFCID3_MAXSIZE), target->nfcid2,
target->nfcid2_len);
else
memcpy(skb_put(skb, NFC_NFCID3_MAXSIZE), nfcid3,
NFC_NFCID3_MAXSIZE);
*next |= 2;
if (gb != NULL && gb_len > 0) {
memcpy(skb_put(skb, gb_len), gb, gb_len);
*next |= 4; /* We have some Gi */
} else {
*next = 0;
}
arg = kmalloc(sizeof(*arg), GFP_KERNEL);
if (!arg) {
dev_kfree_skb(skb);
return -ENOMEM;
}
*arg = !comm_mode;
pn533_rf_field(dev->nfc_dev, 0);
rc = pn533_send_cmd_async(dev, PN533_CMD_IN_JUMP_FOR_DEP, skb,
pn533_in_dep_link_up_complete, arg);
if (rc < 0) {
dev_kfree_skb(skb);
kfree(arg);
}
return rc;
}
static int pn533_dep_link_down(struct nfc_dev *nfc_dev)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
dev_dbg(dev->dev, "%s\n", __func__);
pn533_poll_reset_mod_list(dev);
if (dev->tgt_mode || dev->tgt_active_prot)
dev->phy_ops->abort_cmd(dev, GFP_KERNEL);
dev->tgt_active_prot = 0;
dev->tgt_mode = 0;
skb_queue_purge(&dev->resp_q);
return 0;
}
struct pn533_data_exchange_arg {
data_exchange_cb_t cb;
void *cb_context;
};
static struct sk_buff *pn533_build_response(struct pn533 *dev)
{
struct sk_buff *skb, *tmp, *t;
unsigned int skb_len = 0, tmp_len = 0;
dev_dbg(dev->dev, "%s\n", __func__);
if (skb_queue_empty(&dev->resp_q))
return NULL;
if (skb_queue_len(&dev->resp_q) == 1) {
skb = skb_dequeue(&dev->resp_q);
goto out;
}
skb_queue_walk_safe(&dev->resp_q, tmp, t)
skb_len += tmp->len;
dev_dbg(dev->dev, "%s total length %d\n",
__func__, skb_len);
skb = alloc_skb(skb_len, GFP_KERNEL);
if (skb == NULL)
goto out;
skb_put(skb, skb_len);
skb_queue_walk_safe(&dev->resp_q, tmp, t) {
memcpy(skb->data + tmp_len, tmp->data, tmp->len);
tmp_len += tmp->len;
}
out:
skb_queue_purge(&dev->resp_q);
return skb;
}
static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg,
struct sk_buff *resp)
{
struct pn533_data_exchange_arg *arg = _arg;
struct sk_buff *skb;
int rc = 0;
u8 status, ret, mi;
dev_dbg(dev->dev, "%s\n", __func__);
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
goto _error;
}
status = resp->data[0];
ret = status & PN533_CMD_RET_MASK;
mi = status & PN533_CMD_MI_MASK;
skb_pull(resp, sizeof(status));
if (ret != PN533_CMD_RET_SUCCESS) {
nfc_err(dev->dev,
"Exchanging data failed (error 0x%x)\n", ret);
rc = -EIO;
goto error;
}
skb_queue_tail(&dev->resp_q, resp);
if (mi) {
dev->cmd_complete_mi_arg = arg;
queue_work(dev->wq, &dev->mi_rx_work);
return -EINPROGRESS;
}
/* Prepare for the next round */
if (skb_queue_len(&dev->fragment_skb) > 0) {
dev->cmd_complete_dep_arg = arg;
queue_work(dev->wq, &dev->mi_tx_work);
return -EINPROGRESS;
}
skb = pn533_build_response(dev);
if (!skb) {
rc = -ENOMEM;
goto error;
}
arg->cb(arg->cb_context, skb, 0);
kfree(arg);
return 0;
error:
dev_kfree_skb(resp);
_error:
skb_queue_purge(&dev->resp_q);
arg->cb(arg->cb_context, NULL, rc);
kfree(arg);
return rc;
}
/*
* Receive an incoming pn533 frame. skb contains only header and payload.
* If skb == NULL, it is a notification that the link below is dead.
*/
void pn533_recv_frame(struct pn533 *dev, struct sk_buff *skb, int status)
{
if (!dev->cmd)
goto sched_wq;
dev->cmd->status = status;
if (status != 0) {
dev_dbg(dev->dev, "%s: Error received: %d\n", __func__, status);
goto sched_wq;
}
if (skb == NULL) {
pr_err("NULL Frame -> link is dead\n");
goto sched_wq;
}
if (pn533_rx_frame_is_ack(skb->data)) {
dev_dbg(dev->dev, "%s: Received ACK frame\n", __func__);
dev_kfree_skb(skb);
return;
}
print_hex_dump_debug("PN533 RX: ", DUMP_PREFIX_NONE, 16, 1, skb->data,
dev->ops->rx_frame_size(skb->data), false);
if (!dev->ops->rx_is_frame_valid(skb->data, dev)) {
nfc_err(dev->dev, "Received an invalid frame\n");
dev->cmd->status = -EIO;
} else if (!pn533_rx_frame_is_cmd_response(dev, skb->data)) {
nfc_err(dev->dev, "It it not the response to the last command\n");
dev->cmd->status = -EIO;
}
dev->cmd->resp = skb;
sched_wq:
queue_work(dev->wq, &dev->cmd_complete_work);
}
EXPORT_SYMBOL(pn533_recv_frame);
/* Split the Tx skb into small chunks */
static int pn533_fill_fragment_skbs(struct pn533 *dev, struct sk_buff *skb)
{
struct sk_buff *frag;
int frag_size;
do {
/* Remaining size */
if (skb->len > PN533_CMD_DATAFRAME_MAXLEN)
frag_size = PN533_CMD_DATAFRAME_MAXLEN;
else
frag_size = skb->len;
/* Allocate and reserve */
frag = pn533_alloc_skb(dev, frag_size);
if (!frag) {
skb_queue_purge(&dev->fragment_skb);
break;
}
if (!dev->tgt_mode) {
/* Reserve the TG/MI byte */
skb_reserve(frag, 1);
/* MI + TG */
if (frag_size == PN533_CMD_DATAFRAME_MAXLEN)
*skb_push(frag, sizeof(u8)) =
(PN533_CMD_MI_MASK | 1);
else
*skb_push(frag, sizeof(u8)) = 1; /* TG */
}
memcpy(skb_put(frag, frag_size), skb->data, frag_size);
/* Reduce the size of incoming buffer */
skb_pull(skb, frag_size);
/* Add this to skb_queue */
skb_queue_tail(&dev->fragment_skb, frag);
} while (skb->len > 0);
dev_kfree_skb(skb);
return skb_queue_len(&dev->fragment_skb);
}
static int pn533_transceive(struct nfc_dev *nfc_dev,
struct nfc_target *target, struct sk_buff *skb,
data_exchange_cb_t cb, void *cb_context)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
struct pn533_data_exchange_arg *arg = NULL;
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
if (!dev->tgt_active_prot) {
nfc_err(dev->dev,
"Can't exchange data if there is no active target\n");
rc = -EINVAL;
goto error;
}
arg = kmalloc(sizeof(*arg), GFP_KERNEL);
if (!arg) {
rc = -ENOMEM;
goto error;
}
arg->cb = cb;
arg->cb_context = cb_context;
switch (dev->device_type) {
case PN533_DEVICE_PASORI:
if (dev->tgt_active_prot == NFC_PROTO_FELICA) {
rc = pn533_send_data_async(dev, PN533_CMD_IN_COMM_THRU,
skb,
pn533_data_exchange_complete,
arg);
break;
}
default:
/* jumbo frame ? */
if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) {
rc = pn533_fill_fragment_skbs(dev, skb);
if (rc <= 0)
goto error;
skb = skb_dequeue(&dev->fragment_skb);
if (!skb) {
rc = -EIO;
goto error;
}
} else {
*skb_push(skb, sizeof(u8)) = 1; /* TG */
}
rc = pn533_send_data_async(dev, PN533_CMD_IN_DATA_EXCHANGE,
skb, pn533_data_exchange_complete,
arg);
break;
}
if (rc < 0) /* rc from send_async */
goto error;
return 0;
error:
kfree(arg);
dev_kfree_skb(skb);
return rc;
}
static int pn533_tm_send_complete(struct pn533 *dev, void *arg,
struct sk_buff *resp)
{
u8 status;
dev_dbg(dev->dev, "%s\n", __func__);
if (IS_ERR(resp))
return PTR_ERR(resp);
status = resp->data[0];
/* Prepare for the next round */
if (skb_queue_len(&dev->fragment_skb) > 0) {
queue_work(dev->wq, &dev->mi_tm_tx_work);
return -EINPROGRESS;
}
dev_kfree_skb(resp);
if (status != 0) {
nfc_tm_deactivated(dev->nfc_dev);
dev->tgt_mode = 0;
return 0;
}
queue_work(dev->wq, &dev->tg_work);
return 0;
}
static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
/* let's split in multiple chunks if size's too big */
if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) {
rc = pn533_fill_fragment_skbs(dev, skb);
if (rc <= 0)
goto error;
/* get the first skb */
skb = skb_dequeue(&dev->fragment_skb);
if (!skb) {
rc = -EIO;
goto error;
}
rc = pn533_send_data_async(dev, PN533_CMD_TG_SET_META_DATA, skb,
pn533_tm_send_complete, NULL);
} else {
/* Send th skb */
rc = pn533_send_data_async(dev, PN533_CMD_TG_SET_DATA, skb,
pn533_tm_send_complete, NULL);
}
error:
if (rc < 0) {
dev_kfree_skb(skb);
skb_queue_purge(&dev->fragment_skb);
}
return rc;
}
static void pn533_wq_mi_recv(struct work_struct *work)
{
struct pn533 *dev = container_of(work, struct pn533, mi_rx_work);
struct sk_buff *skb;
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
skb = pn533_alloc_skb(dev, PN533_CMD_DATAEXCH_HEAD_LEN);
if (!skb)
goto error;
switch (dev->device_type) {
case PN533_DEVICE_PASORI:
if (dev->tgt_active_prot == NFC_PROTO_FELICA) {
rc = pn533_send_cmd_direct_async(dev,
PN533_CMD_IN_COMM_THRU,
skb,
pn533_data_exchange_complete,
dev->cmd_complete_mi_arg);
break;
}
default:
*skb_put(skb, sizeof(u8)) = 1; /*TG*/
rc = pn533_send_cmd_direct_async(dev,
PN533_CMD_IN_DATA_EXCHANGE,
skb,
pn533_data_exchange_complete,
dev->cmd_complete_mi_arg);
break;
}
if (rc == 0) /* success */
return;
nfc_err(dev->dev,
"Error %d when trying to perform data_exchange\n", rc);
dev_kfree_skb(skb);
kfree(dev->cmd_complete_mi_arg);
error:
dev->phy_ops->send_ack(dev, GFP_KERNEL);
NFC: Queue pn533 commands Instead of returning EBUSY when getting a command while another one is running, we queue them. Upon completion of the pending command, the next one is processed. Besides the fact that it simplifies the pn533 locking scheme, it also comes with the nice side effect of fixing the following warning: [ 82.274297] ===================================== [ 82.274297] [ BUG: bad unlock balance detected! ] [ 82.274298] 3.5.0-rc1+ #1 Not tainted [ 82.274299] ------------------------------------- [ 82.274300] kworker/u:1/16 is trying to release lock (&dev->cmd_lock) at: [ 82.274305] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274305] but there are no more locks to release! [ 82.274306] [ 82.274306] other info that might help us debug this: [ 82.274306] 2 locks held by kworker/u:1/16: [ 82.274311] #0: (pn533){.+.+..}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] #1: ((&dev->cmd_work)){+.+...}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] [ 82.274314] stack backtrace: [ 82.274315] Pid: 16, comm: kworker/u:1 Not tainted 3.5.0-rc1+ #1 [ 82.274315] Call Trace: [ 82.274317] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274321] [<ffffffff81059841>] print_unlock_inbalance_bug+0xda/0xe4 [ 82.274323] [<ffffffff8105c74c>] lock_release_non_nested+0xb2/0x232 [ 82.274325] [<ffffffff8105a61e>] ? mark_held_locks+0x6d/0x95 [ 82.274326] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274328] [<ffffffff81451105>] ? _raw_spin_unlock_irqrestore+0x40/0x5c [ 82.274329] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274330] [<ffffffff8105ca42>] lock_release+0x176/0x1ac [ 82.274333] [<ffffffff8123de14>] ? pn533_send_complete+0xa8/0xa8 [ 82.274334] [<ffffffff8144f1d6>] __mutex_unlock_slowpath+0xb0/0x117 [ 82.274336] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274337] [<ffffffff8123de65>] pn533_wq_cmd_complete+0x51/0x55 [ 82.274338] [<ffffffff8103a6db>] process_one_work+0x1a3/0x2e2 [ 82.274340] [<ffffffff8103a67d>] ? process_one_work+0x145/0x2e2 [ 82.274341] [<ffffffff8103b119>] worker_thread+0xcf/0x153 [ 82.274343] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274344] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274346] [<ffffffff8103eb11>] kthread+0x95/0x9d [ 82.274348] [<ffffffff81452ef4>] kernel_thread_helper+0x4/0x10 [ 82.274351] [<ffffffff81046561>] ? finish_task_switch+0x45/0xc3 [ 82.274352] [<ffffffff814514f0>] ? retint_restore_args+0x13/0x13 [ 82.274353] [<ffffffff8103ea7c>] ? __init_kthread_worker+0x55/0x55 [ 82.274354] [<ffffffff81452ef0>] ? gs_change+0x13/0x13 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-18 04:47:54 +07:00
queue_work(dev->wq, &dev->cmd_work);
}
static void pn533_wq_mi_send(struct work_struct *work)
{
struct pn533 *dev = container_of(work, struct pn533, mi_tx_work);
struct sk_buff *skb;
int rc;
dev_dbg(dev->dev, "%s\n", __func__);
/* Grab the first skb in the queue */
skb = skb_dequeue(&dev->fragment_skb);
if (skb == NULL) { /* No more data */
/* Reset the queue for future use */
skb_queue_head_init(&dev->fragment_skb);
goto error;
}
switch (dev->device_type) {
case PN533_DEVICE_PASORI:
if (dev->tgt_active_prot != NFC_PROTO_FELICA) {
rc = -EIO;
break;
}
rc = pn533_send_cmd_direct_async(dev, PN533_CMD_IN_COMM_THRU,
skb,
pn533_data_exchange_complete,
dev->cmd_complete_dep_arg);
break;
default:
/* Still some fragments? */
rc = pn533_send_cmd_direct_async(dev,
PN533_CMD_IN_DATA_EXCHANGE,
skb,
pn533_data_exchange_complete,
dev->cmd_complete_dep_arg);
break;
}
if (rc == 0) /* success */
return;
nfc_err(dev->dev,
"Error %d when trying to perform data_exchange\n", rc);
dev_kfree_skb(skb);
kfree(dev->cmd_complete_dep_arg);
error:
dev->phy_ops->send_ack(dev, GFP_KERNEL);
queue_work(dev->wq, &dev->cmd_work);
}
static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata,
u8 cfgdata_len)
{
struct sk_buff *skb;
struct sk_buff *resp;
int skb_len;
dev_dbg(dev->dev, "%s\n", __func__);
skb_len = sizeof(cfgitem) + cfgdata_len; /* cfgitem + cfgdata */
skb = pn533_alloc_skb(dev, skb_len);
if (!skb)
return -ENOMEM;
*skb_put(skb, sizeof(cfgitem)) = cfgitem;
memcpy(skb_put(skb, cfgdata_len), cfgdata, cfgdata_len);
resp = pn533_send_cmd_sync(dev, PN533_CMD_RF_CONFIGURATION, skb);
if (IS_ERR(resp))
return PTR_ERR(resp);
dev_kfree_skb(resp);
return 0;
}
static int pn533_get_firmware_version(struct pn533 *dev,
struct pn533_fw_version *fv)
{
struct sk_buff *skb;
struct sk_buff *resp;
skb = pn533_alloc_skb(dev, 0);
if (!skb)
return -ENOMEM;
resp = pn533_send_cmd_sync(dev, PN533_CMD_GET_FIRMWARE_VERSION, skb);
if (IS_ERR(resp))
return PTR_ERR(resp);
fv->ic = resp->data[0];
fv->ver = resp->data[1];
fv->rev = resp->data[2];
fv->support = resp->data[3];
dev_kfree_skb(resp);
return 0;
}
static int pn533_pasori_fw_reset(struct pn533 *dev)
{
struct sk_buff *skb;
struct sk_buff *resp;
dev_dbg(dev->dev, "%s\n", __func__);
skb = pn533_alloc_skb(dev, sizeof(u8));
if (!skb)
return -ENOMEM;
*skb_put(skb, sizeof(u8)) = 0x1;
resp = pn533_send_cmd_sync(dev, 0x18, skb);
if (IS_ERR(resp))
return PTR_ERR(resp);
dev_kfree_skb(resp);
return 0;
}
static int pn533_rf_field(struct nfc_dev *nfc_dev, u8 rf)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
u8 rf_field = !!rf;
int rc;
rf_field |= PN533_CFGITEM_RF_FIELD_AUTO_RFCA;
rc = pn533_set_configuration(dev, PN533_CFGITEM_RF_FIELD,
(u8 *)&rf_field, 1);
if (rc) {
nfc_err(dev->dev, "Error on setting RF field\n");
return rc;
}
return rc;
}
static int pn532_sam_configuration(struct nfc_dev *nfc_dev)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
struct sk_buff *skb;
struct sk_buff *resp;
skb = pn533_alloc_skb(dev, 1);
if (!skb)
return -ENOMEM;
*skb_put(skb, 1) = 0x01;
resp = pn533_send_cmd_sync(dev, PN533_CMD_SAM_CONFIGURATION, skb);
if (IS_ERR(resp))
return PTR_ERR(resp);
dev_kfree_skb(resp);
return 0;
}
static int pn533_dev_up(struct nfc_dev *nfc_dev)
{
struct pn533 *dev = nfc_get_drvdata(nfc_dev);
if (dev->device_type == PN533_DEVICE_PN532) {
int rc = pn532_sam_configuration(nfc_dev);
if (rc)
return rc;
}
return pn533_rf_field(nfc_dev, 1);
}
static int pn533_dev_down(struct nfc_dev *nfc_dev)
{
return pn533_rf_field(nfc_dev, 0);
}
static struct nfc_ops pn533_nfc_ops = {
.dev_up = pn533_dev_up,
.dev_down = pn533_dev_down,
.dep_link_up = pn533_dep_link_up,
.dep_link_down = pn533_dep_link_down,
.start_poll = pn533_start_poll,
.stop_poll = pn533_stop_poll,
.activate_target = pn533_activate_target,
.deactivate_target = pn533_deactivate_target,
.im_transceive = pn533_transceive,
.tm_send = pn533_tm_send,
};
static int pn533_setup(struct pn533 *dev)
{
struct pn533_config_max_retries max_retries;
struct pn533_config_timing timing;
u8 pasori_cfg[3] = {0x08, 0x01, 0x08};
int rc;
switch (dev->device_type) {
case PN533_DEVICE_STD:
case PN533_DEVICE_PASORI:
case PN533_DEVICE_ACR122U:
case PN533_DEVICE_PN532:
max_retries.mx_rty_atr = 0x2;
max_retries.mx_rty_psl = 0x1;
max_retries.mx_rty_passive_act =
PN533_CONFIG_MAX_RETRIES_NO_RETRY;
timing.rfu = PN533_CONFIG_TIMING_102;
timing.atr_res_timeout = PN533_CONFIG_TIMING_102;
timing.dep_timeout = PN533_CONFIG_TIMING_204;
break;
default:
nfc_err(dev->dev, "Unknown device type %d\n",
dev->device_type);
return -EINVAL;
}
rc = pn533_set_configuration(dev, PN533_CFGITEM_MAX_RETRIES,
(u8 *)&max_retries, sizeof(max_retries));
if (rc) {
nfc_err(dev->dev,
"Error on setting MAX_RETRIES config\n");
return rc;
}
rc = pn533_set_configuration(dev, PN533_CFGITEM_TIMING,
(u8 *)&timing, sizeof(timing));
if (rc) {
nfc_err(dev->dev, "Error on setting RF timings\n");
return rc;
}
switch (dev->device_type) {
case PN533_DEVICE_STD:
case PN533_DEVICE_PN532:
break;
case PN533_DEVICE_PASORI:
pn533_pasori_fw_reset(dev);
rc = pn533_set_configuration(dev, PN533_CFGITEM_PASORI,
pasori_cfg, 3);
if (rc) {
nfc_err(dev->dev,
"Error while settings PASORI config\n");
return rc;
}
pn533_pasori_fw_reset(dev);
break;
}
return 0;
}
int pn533_finalize_setup(struct pn533 *dev)
{
struct pn533_fw_version fw_ver;
int rc;
memset(&fw_ver, 0, sizeof(fw_ver));
rc = pn533_get_firmware_version(dev, &fw_ver);
if (rc) {
nfc_err(dev->dev, "Unable to get FW version\n");
return rc;
}
nfc_info(dev->dev, "NXP PN5%02X firmware ver %d.%d now attached\n",
fw_ver.ic, fw_ver.ver, fw_ver.rev);
rc = pn533_setup(dev);
if (rc)
return rc;
return 0;
}
EXPORT_SYMBOL_GPL(pn533_finalize_setup);
struct pn533 *pn533_register_device(u32 device_type,
u32 protocols,
enum pn533_protocol_type protocol_type,
void *phy,
struct pn533_phy_ops *phy_ops,
struct pn533_frame_ops *fops,
struct device *dev,
struct device *parent)
{
struct pn533 *priv;
int rc = -ENOMEM;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return ERR_PTR(-ENOMEM);
priv->phy = phy;
priv->phy_ops = phy_ops;
priv->dev = dev;
if (fops != NULL)
priv->ops = fops;
else
priv->ops = &pn533_std_frame_ops;
priv->protocol_type = protocol_type;
priv->device_type = device_type;
mutex_init(&priv->cmd_lock);
INIT_WORK(&priv->cmd_work, pn533_wq_cmd);
INIT_WORK(&priv->cmd_complete_work, pn533_wq_cmd_complete);
INIT_WORK(&priv->mi_rx_work, pn533_wq_mi_recv);
INIT_WORK(&priv->mi_tx_work, pn533_wq_mi_send);
INIT_WORK(&priv->tg_work, pn533_wq_tg_get_data);
INIT_WORK(&priv->mi_tm_rx_work, pn533_wq_tm_mi_recv);
INIT_WORK(&priv->mi_tm_tx_work, pn533_wq_tm_mi_send);
INIT_DELAYED_WORK(&priv->poll_work, pn533_wq_poll);
INIT_WORK(&priv->rf_work, pn533_wq_rf);
priv->wq = alloc_ordered_workqueue("pn533", 0);
if (priv->wq == NULL)
goto error;
init_timer(&priv->listen_timer);
priv->listen_timer.data = (unsigned long) priv;
priv->listen_timer.function = pn533_listen_mode_timer;
skb_queue_head_init(&priv->resp_q);
skb_queue_head_init(&priv->fragment_skb);
INIT_LIST_HEAD(&priv->cmd_queue);
priv->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols,
priv->ops->tx_header_len +
PN533_CMD_DATAEXCH_HEAD_LEN,
priv->ops->tx_tail_len);
if (!priv->nfc_dev) {
rc = -ENOMEM;
goto destroy_wq;
}
nfc_set_parent_dev(priv->nfc_dev, parent);
nfc_set_drvdata(priv->nfc_dev, priv);
rc = nfc_register_device(priv->nfc_dev);
if (rc)
goto free_nfc_dev;
return priv;
free_nfc_dev:
nfc_free_device(priv->nfc_dev);
destroy_wq:
destroy_workqueue(priv->wq);
error:
kfree(priv);
return ERR_PTR(rc);
}
EXPORT_SYMBOL_GPL(pn533_register_device);
void pn533_unregister_device(struct pn533 *priv)
{
NFC: Queue pn533 commands Instead of returning EBUSY when getting a command while another one is running, we queue them. Upon completion of the pending command, the next one is processed. Besides the fact that it simplifies the pn533 locking scheme, it also comes with the nice side effect of fixing the following warning: [ 82.274297] ===================================== [ 82.274297] [ BUG: bad unlock balance detected! ] [ 82.274298] 3.5.0-rc1+ #1 Not tainted [ 82.274299] ------------------------------------- [ 82.274300] kworker/u:1/16 is trying to release lock (&dev->cmd_lock) at: [ 82.274305] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274305] but there are no more locks to release! [ 82.274306] [ 82.274306] other info that might help us debug this: [ 82.274306] 2 locks held by kworker/u:1/16: [ 82.274311] #0: (pn533){.+.+..}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] #1: ((&dev->cmd_work)){+.+...}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] [ 82.274314] stack backtrace: [ 82.274315] Pid: 16, comm: kworker/u:1 Not tainted 3.5.0-rc1+ #1 [ 82.274315] Call Trace: [ 82.274317] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274321] [<ffffffff81059841>] print_unlock_inbalance_bug+0xda/0xe4 [ 82.274323] [<ffffffff8105c74c>] lock_release_non_nested+0xb2/0x232 [ 82.274325] [<ffffffff8105a61e>] ? mark_held_locks+0x6d/0x95 [ 82.274326] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274328] [<ffffffff81451105>] ? _raw_spin_unlock_irqrestore+0x40/0x5c [ 82.274329] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274330] [<ffffffff8105ca42>] lock_release+0x176/0x1ac [ 82.274333] [<ffffffff8123de14>] ? pn533_send_complete+0xa8/0xa8 [ 82.274334] [<ffffffff8144f1d6>] __mutex_unlock_slowpath+0xb0/0x117 [ 82.274336] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274337] [<ffffffff8123de65>] pn533_wq_cmd_complete+0x51/0x55 [ 82.274338] [<ffffffff8103a6db>] process_one_work+0x1a3/0x2e2 [ 82.274340] [<ffffffff8103a67d>] ? process_one_work+0x145/0x2e2 [ 82.274341] [<ffffffff8103b119>] worker_thread+0xcf/0x153 [ 82.274343] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274344] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274346] [<ffffffff8103eb11>] kthread+0x95/0x9d [ 82.274348] [<ffffffff81452ef4>] kernel_thread_helper+0x4/0x10 [ 82.274351] [<ffffffff81046561>] ? finish_task_switch+0x45/0xc3 [ 82.274352] [<ffffffff814514f0>] ? retint_restore_args+0x13/0x13 [ 82.274353] [<ffffffff8103ea7c>] ? __init_kthread_worker+0x55/0x55 [ 82.274354] [<ffffffff81452ef0>] ? gs_change+0x13/0x13 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-18 04:47:54 +07:00
struct pn533_cmd *cmd, *n;
nfc_unregister_device(priv->nfc_dev);
nfc_free_device(priv->nfc_dev);
flush_delayed_work(&priv->poll_work);
destroy_workqueue(priv->wq);
skb_queue_purge(&priv->resp_q);
del_timer(&priv->listen_timer);
list_for_each_entry_safe(cmd, n, &priv->cmd_queue, queue) {
NFC: Queue pn533 commands Instead of returning EBUSY when getting a command while another one is running, we queue them. Upon completion of the pending command, the next one is processed. Besides the fact that it simplifies the pn533 locking scheme, it also comes with the nice side effect of fixing the following warning: [ 82.274297] ===================================== [ 82.274297] [ BUG: bad unlock balance detected! ] [ 82.274298] 3.5.0-rc1+ #1 Not tainted [ 82.274299] ------------------------------------- [ 82.274300] kworker/u:1/16 is trying to release lock (&dev->cmd_lock) at: [ 82.274305] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274305] but there are no more locks to release! [ 82.274306] [ 82.274306] other info that might help us debug this: [ 82.274306] 2 locks held by kworker/u:1/16: [ 82.274311] #0: (pn533){.+.+..}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] #1: ((&dev->cmd_work)){+.+...}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] [ 82.274314] stack backtrace: [ 82.274315] Pid: 16, comm: kworker/u:1 Not tainted 3.5.0-rc1+ #1 [ 82.274315] Call Trace: [ 82.274317] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274321] [<ffffffff81059841>] print_unlock_inbalance_bug+0xda/0xe4 [ 82.274323] [<ffffffff8105c74c>] lock_release_non_nested+0xb2/0x232 [ 82.274325] [<ffffffff8105a61e>] ? mark_held_locks+0x6d/0x95 [ 82.274326] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274328] [<ffffffff81451105>] ? _raw_spin_unlock_irqrestore+0x40/0x5c [ 82.274329] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274330] [<ffffffff8105ca42>] lock_release+0x176/0x1ac [ 82.274333] [<ffffffff8123de14>] ? pn533_send_complete+0xa8/0xa8 [ 82.274334] [<ffffffff8144f1d6>] __mutex_unlock_slowpath+0xb0/0x117 [ 82.274336] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274337] [<ffffffff8123de65>] pn533_wq_cmd_complete+0x51/0x55 [ 82.274338] [<ffffffff8103a6db>] process_one_work+0x1a3/0x2e2 [ 82.274340] [<ffffffff8103a67d>] ? process_one_work+0x145/0x2e2 [ 82.274341] [<ffffffff8103b119>] worker_thread+0xcf/0x153 [ 82.274343] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274344] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274346] [<ffffffff8103eb11>] kthread+0x95/0x9d [ 82.274348] [<ffffffff81452ef4>] kernel_thread_helper+0x4/0x10 [ 82.274351] [<ffffffff81046561>] ? finish_task_switch+0x45/0xc3 [ 82.274352] [<ffffffff814514f0>] ? retint_restore_args+0x13/0x13 [ 82.274353] [<ffffffff8103ea7c>] ? __init_kthread_worker+0x55/0x55 [ 82.274354] [<ffffffff81452ef0>] ? gs_change+0x13/0x13 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-18 04:47:54 +07:00
list_del(&cmd->queue);
kfree(cmd);
}
kfree(priv);
}
EXPORT_SYMBOL_GPL(pn533_unregister_device);
MODULE_AUTHOR("Lauro Ramos Venancio <lauro.venancio@openbossa.org>");
MODULE_AUTHOR("Aloisio Almeida Jr <aloisio.almeida@openbossa.org>");
MODULE_AUTHOR("Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>");
MODULE_DESCRIPTION("PN533 driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");