linux_dsm_epyc7002/arch/x86/include/asm/irqflags.h

207 lines
4.1 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _X86_IRQFLAGS_H_
#define _X86_IRQFLAGS_H_
#include <asm/processor-flags.h>
#ifndef __ASSEMBLY__
/* Provide __cpuidle; we can't safely include <linux/cpu.h> */
#define __cpuidle __attribute__((__section__(".cpuidle.text")))
/*
* Interrupt control:
*/
static inline unsigned long native_save_fl(void)
{
unsigned long flags;
/*
* "=rm" is safe here, because "pop" adjusts the stack before
* it evaluates its effective address -- this is part of the
* documented behavior of the "pop" instruction.
*/
asm volatile("# __raw_save_flags\n\t"
"pushf ; pop %0"
: "=rm" (flags)
: /* no input */
: "memory");
return flags;
}
static inline void native_restore_fl(unsigned long flags)
{
asm volatile("push %0 ; popf"
: /* no output */
:"g" (flags)
:"memory", "cc");
}
static inline void native_irq_disable(void)
{
asm volatile("cli": : :"memory");
}
static inline void native_irq_enable(void)
{
asm volatile("sti": : :"memory");
}
static inline __cpuidle void native_safe_halt(void)
{
asm volatile("sti; hlt": : :"memory");
}
static inline __cpuidle void native_halt(void)
{
asm volatile("hlt": : :"memory");
}
#endif
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#ifndef __ASSEMBLY__
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 10:04:36 +07:00
#include <linux/types.h>
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 10:04:36 +07:00
static inline notrace unsigned long arch_local_save_flags(void)
{
return native_save_fl();
}
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 10:04:36 +07:00
static inline notrace void arch_local_irq_restore(unsigned long flags)
{
native_restore_fl(flags);
}
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 10:04:36 +07:00
static inline notrace void arch_local_irq_disable(void)
{
native_irq_disable();
}
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 10:04:36 +07:00
static inline notrace void arch_local_irq_enable(void)
{
native_irq_enable();
}
/*
* Used in the idle loop; sti takes one instruction cycle
* to complete:
*/
static inline __cpuidle void arch_safe_halt(void)
{
native_safe_halt();
}
/*
* Used when interrupts are already enabled or to
* shutdown the processor:
*/
static inline __cpuidle void halt(void)
{
native_halt();
}
/*
* For spinlocks, etc:
*/
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 10:04:36 +07:00
static inline notrace unsigned long arch_local_irq_save(void)
{
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 20:08:55 +07:00
unsigned long flags = arch_local_save_flags();
arch_local_irq_disable();
return flags;
}
#else
#define ENABLE_INTERRUPTS(x) sti
#define DISABLE_INTERRUPTS(x) cli
#ifdef CONFIG_X86_64
#define SWAPGS swapgs
/*
* Currently paravirt can't handle swapgs nicely when we
* don't have a stack we can rely on (such as a user space
* stack). So we either find a way around these or just fault
* and emulate if a guest tries to call swapgs directly.
*
* Either way, this is a good way to document that we don't
* have a reliable stack. x86_64 only.
*/
#define SWAPGS_UNSAFE_STACK swapgs
#define PARAVIRT_ADJUST_EXCEPTION_FRAME /* */
#define INTERRUPT_RETURN jmp native_iret
#define USERGS_SYSRET64 \
swapgs; \
sysretq;
#define USERGS_SYSRET32 \
swapgs; \
sysretl
2017-12-04 21:07:07 +07:00
#ifdef CONFIG_DEBUG_ENTRY
#define SAVE_FLAGS(x) pushfq; popq %rax
#endif
#else
#define INTERRUPT_RETURN iret
#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
#define GET_CR0_INTO_EAX movl %cr0, %eax
#endif
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_PARAVIRT */
#ifndef __ASSEMBLY__
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 20:08:55 +07:00
static inline int arch_irqs_disabled_flags(unsigned long flags)
{
return !(flags & X86_EFLAGS_IF);
}
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 20:08:55 +07:00
static inline int arch_irqs_disabled(void)
{
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 20:08:55 +07:00
unsigned long flags = arch_local_save_flags();
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 20:08:55 +07:00
return arch_irqs_disabled_flags(flags);
}
#endif /* !__ASSEMBLY__ */
#ifdef __ASSEMBLY__
#ifdef CONFIG_TRACE_IRQFLAGS
# define TRACE_IRQS_ON call trace_hardirqs_on_thunk;
# define TRACE_IRQS_OFF call trace_hardirqs_off_thunk;
#else
# define TRACE_IRQS_ON
# define TRACE_IRQS_OFF
#endif
#ifdef CONFIG_DEBUG_LOCK_ALLOC
# ifdef CONFIG_X86_64
# define LOCKDEP_SYS_EXIT call lockdep_sys_exit_thunk
# define LOCKDEP_SYS_EXIT_IRQ \
TRACE_IRQS_ON; \
sti; \
call lockdep_sys_exit_thunk; \
cli; \
TRACE_IRQS_OFF;
# else
# define LOCKDEP_SYS_EXIT \
pushl %eax; \
pushl %ecx; \
pushl %edx; \
call lockdep_sys_exit; \
popl %edx; \
popl %ecx; \
popl %eax;
# define LOCKDEP_SYS_EXIT_IRQ
# endif
#else
# define LOCKDEP_SYS_EXIT
# define LOCKDEP_SYS_EXIT_IRQ
#endif
#endif /* __ASSEMBLY__ */
#endif