AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-26 00:40:55 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
0adcdeed6f
linux_dsm_epyc7002/drivers/dma/Kconfig

381 lines
9.9 KiB
Plaintext
Raw Normal View History

[I/OAT]: DMA memcpy subsystem Provides an API for offloading memory copies to DMA devices Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-24 07:18:44 +07:00
#
# DMA engine configuration
#
I/OAT: Add DCA services Add code to connect to the DCA driver and provide cpu tags for use by drivers that would like to use Direct Cache Access hints. [Adrian Bunk] Several Kconfig cleanup items [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when built for uni-processor Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 15:27:42 +07:00
menuconfig DMADEVICES
dmaengine: correct invalid assumptions in the Kconfig text This patch corrects recently changed (and now invalid) Kconfig descriptions for the DMA engine framework: - Non-Intel(R) hardware also has DMA engines; - DMA is used for more than memcpy and RAID offloading. In fact, on most platforms memcpy and RAID aren't factors, and DMA exists so that peripherals can transfer data to/from memory while the CPU does other work. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 07:21:43 +07:00
bool "DMA Engine support"
async_xor: permit callers to pass in a 'dma/page scribble' region async_xor() needs space to perform dma and page address conversions. In most cases the code can simply reuse the struct page * array because the size of the native pointer matches the size of a dma/page address. In order to support archs where sizeof(dma_addr_t) is larger than sizeof(struct page *), or to preserve the input parameters, we utilize a memory region passed in by the caller. Since the code is now prepared to handle the case where it cannot perform address conversions on the stack, we no longer need the !HIGHMEM64G dependency in drivers/dma/Kconfig. [ Impact: don't clobber input buffers for address conversions ] Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-06-04 04:22:28 +07:00
depends on HAS_DMA
I/OAT: Add DCA services Add code to connect to the DCA driver and provide cpu tags for use by drivers that would like to use Direct Cache Access hints. [Adrian Bunk] Several Kconfig cleanup items [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when built for uni-processor Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 15:27:42 +07:00
help
dmaengine: correct invalid assumptions in the Kconfig text This patch corrects recently changed (and now invalid) Kconfig descriptions for the DMA engine framework: - Non-Intel(R) hardware also has DMA engines; - DMA is used for more than memcpy and RAID offloading. In fact, on most platforms memcpy and RAID aren't factors, and DMA exists so that peripherals can transfer data to/from memory while the CPU does other work. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 07:21:43 +07:00
DMA engines can do asynchronous data transfers without
involving the host CPU. Currently, this framework can be
used to offload memory copies in the network stack and
dmaengine: remove arch dependency from DMADEVICES The dependency is redundant since all drivers set their specific arch dependencies. The NET_DMA option is modified to be enabled only on platforms where it is known to have a positive effect. HAS_DMA is added as an explicit dependency for the DMADEVICES menu. Acked-by: Adrian Bunk <bunk@kernel.org> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-06-27 15:21:11 +07:00
RAID operations in the MD driver. This menu only presents
DMA Device drivers supported by the configured arch, it may
be empty in some cases.
I/OAT: Add DCA services Add code to connect to the DCA driver and provide cpu tags for use by drivers that would like to use Direct Cache Access hints. [Adrian Bunk] Several Kconfig cleanup items [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when built for uni-processor Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 15:27:42 +07:00
Debugging options for the DMA engine subsystem This adds Kconfig options for DEBUG and VERBOSE_DEBUG to the DMA engine subsystem, I got tired of editing the Makefile manually each time I want to debug things in here, modelled this on the debug switches for other subsystems and works like a charm when working on our DMA engines. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-10 04:34:54 +07:00
config DMADEVICES_DEBUG
bool "DMA Engine debugging"
depends on DMADEVICES != n
help
This is an option for use by developers; most people should
say N here. This enables DMA engine core and driver debugging.
config DMADEVICES_VDEBUG
bool "DMA Engine verbose debugging"
depends on DMADEVICES_DEBUG != n
help
This is an option for use by developers; most people should
say N here. This enables deeper (more verbose) debugging of
the DMA engine core and drivers.
I/OAT: Add DCA services Add code to connect to the DCA driver and provide cpu tags for use by drivers that would like to use Direct Cache Access hints. [Adrian Bunk] Several Kconfig cleanup items [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when built for uni-processor Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 15:27:42 +07:00
if DMADEVICES
comment "DMA Devices"
intel_mid: Add Mrst & Mfld DMA Drivers This patch add DMA drivers for DMA controllers in Langwell chipset of Intel(R) Moorestown platform and DMA controllers in Penwell of Intel(R) Medfield platfrom This patch adds support for Moorestown DMAC1 and DMAC2 controllers. It also add support for Medfiled GP DMA and DMAC1 controllers. These controllers supports memory to peripheral and peripheral to memory transfers. It support only single block transfers. This driver is based on Kernel DMA engine Anyone who wishes to use this controller should use DMA engine APIs This controller exposes DMA_SLAVE capabilities and notifies the client drivers of DMA transaction completion Config option required to be enabled CONFIG_INTEL_MID_DMAC=y Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-07-21 14:58:10 +07:00
config INTEL_MID_DMAC
tristate "Intel MID DMA support for Peripheral DMA controllers"
depends on PCI && X86
select DMA_ENGINE
default n
help
Enable support for the Intel(R) MID DMA engine present
in Intel MID chipsets.
Say Y here if you have such a chipset.
If unsure, say N.
async_tx: make async_tx channel switching opt-in The majority of drivers in drivers/dma/ will never establish cross channel operation chains and do not need the extra overhead in struct dma_async_tx_descriptor. Make channel switching opt-in by default. Cc: Anatolij Gustschin <agust@denx.de> Cc: Ira Snyder <iws@ovro.caltech.edu> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Saeed Bishara <saeed@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-08 06:44:50 +07:00
config ASYNC_TX_ENABLE_CHANNEL_SWITCH
dmaengine, async_tx: add a "no channel switch" allocator Channel switching is problematic for some dmaengine drivers as the architecture precludes separating the ->prep from ->submit. In these cases the driver can select ASYNC_TX_DISABLE_CHANNEL_SWITCH to modify the async_tx allocator to only return channels that support all of the required asynchronous operations. For example MD_RAID456=y selects support for asynchronous xor, xor validate, pq, pq validate, and memcpy. When ASYNC_TX_DISABLE_CHANNEL_SWITCH=y any channel with all these capabilities is marked DMA_ASYNC_TX allowing async_tx_find_channel() to quickly locate compatible channels with the guarantee that dependency chains will remain on one channel. When ASYNC_TX_DISABLE_CHANNEL_SWITCH=n async_tx_find_channel() may select channels that lead to operation chains that need to cross channel boundaries using the async_tx channel switch capability. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-09 07:42:51 +07:00
bool
dmaengine: driver for the ARM PL080/PL081 PrimeCells v5 This creates a DMAengine driver for the ARM PL080/PL081 PrimeCells based on the implementation earlier submitted by Peter Pearse. This is working like a charm for memcpy and slave DMA to the PL011 PrimeCell on the PB11MPCore. This DMA controller is used in mostly unmodified form in the ARM RealView and Versatile platforms, in the ST-Ericsson Nomadik, and in the ST SPEAr platform. It has been converted to use the header from the Samsung PL080 derivate instead of its own defintions. The Samsungs have a custom driver in their mach-* folders though, atleast we can share the register definitions. Cc: Peter Pearse <peter.pearse@arm.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> [GFP_KERNEL to GFP_NOWAIT in pl08x_prep_dma_memcpy] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-28 20:57:37 +07:00
config AMBA_PL08X
bool "ARM PrimeCell PL080 or PL081 support"
drivers/dma: remove CONFIG_EXPERIMENTAL This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Vinod Koul <vinod.koul@intel.com> CC: Dan Williams <djbw@fb.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-24 03:01:54 +07:00
depends on ARM_AMBA
dmaengine: driver for the ARM PL080/PL081 PrimeCells v5 This creates a DMAengine driver for the ARM PL080/PL081 PrimeCells based on the implementation earlier submitted by Peter Pearse. This is working like a charm for memcpy and slave DMA to the PL011 PrimeCell on the PB11MPCore. This DMA controller is used in mostly unmodified form in the ARM RealView and Versatile platforms, in the ST-Ericsson Nomadik, and in the ST SPEAr platform. It has been converted to use the header from the Samsung PL080 derivate instead of its own defintions. The Samsungs have a custom driver in their mach-* folders though, atleast we can share the register definitions. Cc: Peter Pearse <peter.pearse@arm.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> [GFP_KERNEL to GFP_NOWAIT in pl08x_prep_dma_memcpy] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-28 20:57:37 +07:00
select DMA_ENGINE
dmaengine: PL08x: use vchan's spinlock Initialize the vchan struct, and use the provided spinlock rather than our own. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-26 20:09:53 +07:00
select DMA_VIRTUAL_CHANNELS
dmaengine: driver for the ARM PL080/PL081 PrimeCells v5 This creates a DMAengine driver for the ARM PL080/PL081 PrimeCells based on the implementation earlier submitted by Peter Pearse. This is working like a charm for memcpy and slave DMA to the PL011 PrimeCell on the PB11MPCore. This DMA controller is used in mostly unmodified form in the ARM RealView and Versatile platforms, in the ST-Ericsson Nomadik, and in the ST SPEAr platform. It has been converted to use the header from the Samsung PL080 derivate instead of its own defintions. The Samsungs have a custom driver in their mach-* folders though, atleast we can share the register definitions. Cc: Peter Pearse <peter.pearse@arm.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> [GFP_KERNEL to GFP_NOWAIT in pl08x_prep_dma_memcpy] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-28 20:57:37 +07:00
help
Platform has a PL08x DMAC device
which can provide DMA engine support
I/OAT: Add DCA services Add code to connect to the DCA driver and provide cpu tags for use by drivers that would like to use Direct Cache Access hints. [Adrian Bunk] Several Kconfig cleanup items [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when built for uni-processor Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 15:27:42 +07:00
config INTEL_IOATDMA
tristate "Intel I/OAT DMA support"
depends on PCI && X86
select DMA_ENGINE
select DCA
help
Enable support for the Intel(R) I/OAT DMA engine present
in recent Intel Xeon chipsets.
Say Y here if you have such a chipset.
If unsure, say N.
config INTEL_IOP_ADMA
tristate "Intel IOP ADMA support"
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
select DMA_ENGINE
async_tx: make async_tx channel switching opt-in The majority of drivers in drivers/dma/ will never establish cross channel operation chains and do not need the extra overhead in struct dma_async_tx_descriptor. Make channel switching opt-in by default. Cc: Anatolij Gustschin <agust@denx.de> Cc: Ira Snyder <iws@ovro.caltech.edu> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Saeed Bishara <saeed@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-08 06:44:50 +07:00
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
I/OAT: Add DCA services Add code to connect to the DCA driver and provide cpu tags for use by drivers that would like to use Direct Cache Access hints. [Adrian Bunk] Several Kconfig cleanup items [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when built for uni-processor Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 15:27:42 +07:00
help
Enable support for the Intel(R) IOP Series RAID engines.
[I/OAT]: DMA memcpy subsystem Provides an API for offloading memory copies to DMA devices Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-24 07:18:44 +07:00
dma: move dw_dmac driver to an own directory The dw_dmac driver is going to be split into multiple files. To make this more convenient move it to an own directory. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-06-05 19:26:44 +07:00
source "drivers/dma/dw/Kconfig"
drivers/dma/dw_dmac: make driver's endianness configurable The dw_dmac driver was originally developed for avr32 to be used with the Synopsys DesignWare AHB DMA controller. Starting from 2.6.38, access to the device's i/o memory was done with the little-endian readl/writel functions(1) This broke the driver for the avr32 platform, because it needs big (native) endian accessors. This patch makes the endianness configurable using 'DW_DMAC_BIG_ENDIAN_IO', which will default be true for AVR32 I submitted this patch before(2) but then waited for Andy to finish other changes to the same module(3). (1) https://patchwork.kernel.org/patch/608211 (2) https://lkml.org/lkml/2012/8/26/148 (3) https://lkml.org/lkml/2012/9/21/173 Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Havard Skinnemoen <havard@skinnemoen.net> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-26 03:38:05 +07:00
dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller This AHB DMA Controller (aka HDMA or DMAC on AT91 systems) is availlable on at91sam9rl chip. It will be used on other products in the future. This first release covers only the memory-to-memory tranfer type. This is the only tranfer type supported by this chip. On other products, it will be used also for peripheral DMA transfer (slave API support to come). I used dmatest client without problem in different configurations to test it. Full documentation for this controller can be found in the SAM9RL datasheet: http://www.atmel.com/dyn/products/product_card.asp?part_id=4243 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-04 00:24:33 +07:00
config AT_HDMAC
tristate "Atmel AHB DMA support"
dmaengine: Kconfig: fix Atmel at_hdmac entry Remove SoC dependency and make it generic for every Atmel ARM AT91. That will allow to select this driver for newer chips. Keep dependency on AT91 because of the use of an header file located in include/mach directory. Modify the comment to reflect this. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-15 17:31:58 +07:00
depends on ARCH_AT91
dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller This AHB DMA Controller (aka HDMA or DMAC on AT91 systems) is availlable on at91sam9rl chip. It will be used on other products in the future. This first release covers only the memory-to-memory tranfer type. This is the only tranfer type supported by this chip. On other products, it will be used also for peripheral DMA transfer (slave API support to come). I used dmatest client without problem in different configurations to test it. Full documentation for this controller can be found in the SAM9RL datasheet: http://www.atmel.com/dyn/products/product_card.asp?part_id=4243 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-04 00:24:33 +07:00
select DMA_ENGINE
help
dmaengine: Kconfig: fix Atmel at_hdmac entry Remove SoC dependency and make it generic for every Atmel ARM AT91. That will allow to select this driver for newer chips. Keep dependency on AT91 because of the use of an header file located in include/mach directory. Modify the comment to reflect this. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-15 17:31:58 +07:00
Support the Atmel AHB DMA controller.
dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller This AHB DMA Controller (aka HDMA or DMAC on AT91 systems) is availlable on at91sam9rl chip. It will be used on other products in the future. This first release covers only the memory-to-memory tranfer type. This is the only tranfer type supported by this chip. On other products, it will be used also for peripheral DMA transfer (slave API support to come). I used dmatest client without problem in different configurations to test it. Full documentation for this controller can be found in the SAM9RL datasheet: http://www.atmel.com/dyn/products/product_card.asp?part_id=4243 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-04 00:24:33 +07:00
dmaengine: add driver for Freescale MPC85xx DMA controller The driver implements DMA engine API for Freescale MPC85xx DMA controller, which could be used by devices in the silicon. The driver supports the Basic mode of Freescale MPC85xx DMA controller. The MPC85xx processors supported include MPC8540/60, MPC8555, MPC8548, MPC8641 and so on. The MPC83xx(MPC8349, MPC8360) are also supported. [kamalesh@linux.vnet.ibm.com: build fix] [dan.j.williams@intel.com: merge mm fixes, rebase on async_tx-2.6.25] Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Acked-by: Kumar Gala <galak@gate.crashing.org> Cc: Shannon Nelson <shannon.nelson@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-01 21:42:48 +07:00
config FSL_DMA
DMA: Freescale: update driver to support 8-channel DMA engine This patch adds support to 8-channel DMA engine, thus the driver works for both the new 8-channel and the legacy 4-channel DMA engines. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-26 16:33:43 +07:00
tristate "Freescale Elo series DMA support"
fsldma: allow Freescale Elo DMA driver to be compiled as a module Modify the Freescale Elo / Elo Plus DMA driver so that it can be compiled as a module. The primary change is to stop treating the DMA controller as a bus, and the DMA channels as devices on the bus. This is because the Open Firmware (OF) kernel code does not allow busses to be removed, so although we can call of_platform_bus_probe() to probe the DMA channels, there is no of_platform_bus_remove(). Instead, the DMA channels are manually probed, similar to what fsl_elbc_nand.c does. Cc: Scott Wood <scottwood@freescale.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-09-27 07:00:11 +07:00
depends on FSL_SOC
dmaengine: add driver for Freescale MPC85xx DMA controller The driver implements DMA engine API for Freescale MPC85xx DMA controller, which could be used by devices in the silicon. The driver supports the Basic mode of Freescale MPC85xx DMA controller. The MPC85xx processors supported include MPC8540/60, MPC8555, MPC8548, MPC8641 and so on. The MPC83xx(MPC8349, MPC8360) are also supported. [kamalesh@linux.vnet.ibm.com: build fix] [dan.j.williams@intel.com: merge mm fixes, rebase on async_tx-2.6.25] Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Acked-by: Kumar Gala <galak@gate.crashing.org> Cc: Shannon Nelson <shannon.nelson@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-01 21:42:48 +07:00
select DMA_ENGINE
async_tx: make async_tx channel switching opt-in The majority of drivers in drivers/dma/ will never establish cross channel operation chains and do not need the extra overhead in struct dma_async_tx_descriptor. Make channel switching opt-in by default. Cc: Anatolij Gustschin <agust@denx.de> Cc: Ira Snyder <iws@ovro.caltech.edu> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Saeed Bishara <saeed@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-08 06:44:50 +07:00
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
dmaengine: add driver for Freescale MPC85xx DMA controller The driver implements DMA engine API for Freescale MPC85xx DMA controller, which could be used by devices in the silicon. The driver supports the Basic mode of Freescale MPC85xx DMA controller. The MPC85xx processors supported include MPC8540/60, MPC8555, MPC8548, MPC8641 and so on. The MPC83xx(MPC8349, MPC8360) are also supported. [kamalesh@linux.vnet.ibm.com: build fix] [dan.j.williams@intel.com: merge mm fixes, rebase on async_tx-2.6.25] Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Acked-by: Kumar Gala <galak@gate.crashing.org> Cc: Shannon Nelson <shannon.nelson@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-01 21:42:48 +07:00
---help---
DMA: Freescale: update driver to support 8-channel DMA engine This patch adds support to 8-channel DMA engine, thus the driver works for both the new 8-channel and the legacy 4-channel DMA engines. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-26 16:33:43 +07:00
Enable support for the Freescale Elo series DMA controllers.
The Elo is the DMA controller on some mpc82xx and mpc83xx parts, the
EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is on
some Txxx and Bxxx parts.
dmaengine: add driver for Freescale MPC85xx DMA controller The driver implements DMA engine API for Freescale MPC85xx DMA controller, which could be used by devices in the silicon. The driver supports the Basic mode of Freescale MPC85xx DMA controller. The MPC85xx processors supported include MPC8540/60, MPC8555, MPC8548, MPC8641 and so on. The MPC83xx(MPC8349, MPC8360) are also supported. [kamalesh@linux.vnet.ibm.com: build fix] [dan.j.williams@intel.com: merge mm fixes, rebase on async_tx-2.6.25] Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Acked-by: Kumar Gala <galak@gate.crashing.org> Cc: Shannon Nelson <shannon.nelson@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-01 21:42:48 +07:00
dma: Add MPC512x DMA driver Adds initial version of MPC512x DMA driver. Only memory to memory transfers are currenly supported. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: John Rigby <jcrigby@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-05 10:42:52 +07:00
config MPC512X_DMA
tristate "Freescale MPC512x built-in DMA engine support"
powerpc/512x: add MPC8308 dma support MPC8308 has pretty much the same DMA controller as MPC5121 and this patch adds support for MPC8308 to the mpc512x_dma driver. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-27 06:52:57 +07:00
depends on PPC_MPC512x || PPC_MPC831x
dma: Add MPC512x DMA driver Adds initial version of MPC512x DMA driver. Only memory to memory transfers are currenly supported. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: John Rigby <jcrigby@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-05 10:42:52 +07:00
select DMA_ENGINE
---help---
Enable support for the Freescale MPC512x built-in DMA engine.
powerpc, dma: move bestcomm driver from arch/powerpc/sysdev to drivers/dma The bestcomm dma hardware, and some of its users like the FEC ethernet component, is used in different FreeScale parts, including non-powerpc parts like the ColdFire MCF547x & MCF548x families. Don't keep the driver hidden in arch/powerpc where it is inaccessible for other arches. .c files are moved to drivers/dma/bestcomm, while .h files are moved to include/linux/fsl/bestcomm. Makefiles, Kconfigs and #include directives are updated for the new file locations. Tested by recompiling for MPC5200 with all bestcomm users enabled. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-10-12 22:52:45 +07:00
source "drivers/dma/bestcomm/Kconfig"
dmaengine: DMA engine driver for Marvell XOR engine The XOR engine found in Marvell's SoCs and system controllers provides XOR and DMA operation, iSCSI CRC32C calculation, memory initialization, and memory ECC error cleanup operation support. This driver implements the DMA engine API and supports the following capabilities: - memcpy - xor - memset The XOR engine can be used by DMA engine clients implemented in the kernel, one of those clients is the RAID module. In that case, I observed 20% improvement in the raid5 write throughput, and 40% decrease in the CPU utilization when doing array construction, those results obtained on an 5182 running at 500Mhz. When enabling the NET DMA client, the performance decreased, so meanwhile it is recommended to keep this client off. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 01:58:36 +07:00
config MV_XOR
bool "Marvell XOR engine support"
depends on PLAT_ORION
select DMA_ENGINE
async_tx: make async_tx channel switching opt-in The majority of drivers in drivers/dma/ will never establish cross channel operation chains and do not need the extra overhead in struct dma_async_tx_descriptor. Make channel switching opt-in by default. Cc: Anatolij Gustschin <agust@denx.de> Cc: Ira Snyder <iws@ovro.caltech.edu> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Saeed Bishara <saeed@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-08 06:44:50 +07:00
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
dmaengine: DMA engine driver for Marvell XOR engine The XOR engine found in Marvell's SoCs and system controllers provides XOR and DMA operation, iSCSI CRC32C calculation, memory initialization, and memory ECC error cleanup operation support. This driver implements the DMA engine API and supports the following capabilities: - memcpy - xor - memset The XOR engine can be used by DMA engine clients implemented in the kernel, one of those clients is the RAID module. In that case, I observed 20% improvement in the raid5 write throughput, and 40% decrease in the CPU utilization when doing array construction, those results obtained on an 5182 running at 500Mhz. When enabling the NET DMA client, the performance decreased, so meanwhile it is recommended to keep this client off. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 01:58:36 +07:00
---help---
Enable support for the Marvell XOR engine.
i.MX31: Image Processing Unit DMA and IRQ drivers i.MX3x SoCs contain an Image Processing Unit, consisting of a Control Module (CM), Display Interface (DI), Synchronous Display Controller (SDC), Asynchronous Display Controller (ADC), Image Converter (IC), Post-Filter (PF), Camera Sensor Interface (CSI), and an Image DMA Controller (IDMAC). CM contains, among other blocks, an Interrupt Generator (IG) and a Clock and Reset Control Unit (CRCU). This driver serves IDMAC and IG. They are supported over dmaengine and irq-chip APIs respectively. IDMAC is a specialised DMA controller, its DMA channels cannot be used for general-purpose operations, even though it might be possible to configure a memory-to-memory channel for memcpy operation. This driver will not work with generic dmaengine clients, clients, wishing to use it must use respective wrapper structures, they also must specify which channels they require, as channels are hard-wired to specific IPU functions. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-20 05:36:21 +07:00
config MX3_IPU
bool "MX3x Image Processing Unit support"
dma i.MX: remove individual SOC dependency The individual SoC dependency in Kconfig hardly scales anymore. Instead of having such a fine grained dependency just depend on ARCH_MXC and risk that the uninformed user has to look in the help text to figure out which driver is the correct one. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-08-24 13:41:09 +07:00
depends on ARCH_MXC
i.MX31: Image Processing Unit DMA and IRQ drivers i.MX3x SoCs contain an Image Processing Unit, consisting of a Control Module (CM), Display Interface (DI), Synchronous Display Controller (SDC), Asynchronous Display Controller (ADC), Image Converter (IC), Post-Filter (PF), Camera Sensor Interface (CSI), and an Image DMA Controller (IDMAC). CM contains, among other blocks, an Interrupt Generator (IG) and a Clock and Reset Control Unit (CRCU). This driver serves IDMAC and IG. They are supported over dmaengine and irq-chip APIs respectively. IDMAC is a specialised DMA controller, its DMA channels cannot be used for general-purpose operations, even though it might be possible to configure a memory-to-memory channel for memcpy operation. This driver will not work with generic dmaengine clients, clients, wishing to use it must use respective wrapper structures, they also must specify which channels they require, as channels are hard-wired to specific IPU functions. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-20 05:36:21 +07:00
select DMA_ENGINE
default y
help
If you plan to use the Image Processing unit in the i.MX3x, say
Y here. If unsure, select Y.
config MX3_IPU_IRQS
int "Number of dynamically mapped interrupts for IPU"
depends on MX3_IPU
range 2 137
default 4
help
Out of 137 interrupt sources on i.MX31 IPU only very few are used.
To avoid bloating the irq_desc[] array we allocate a sufficient
number of IRQ slots and map them dynamically to specific sources.
DMA: TXx9 Soc DMA Controller driver This patch adds support for the integrated DMAC of the TXx9 family. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-04-22 22:40:30 +07:00
config TXX9_DMAC
tristate "Toshiba TXx9 SoC DMA support"
depends on MACH_TX49XX || MACH_TX39XX
select DMA_ENGINE
help
Support the TXx9 SoC internal DMA controller. This can be
integrated in chips such as the Toshiba TX4927/38/39.
dma: tegra: add dmaengine based dma driver Add dmaengine based NVIDIA's Tegra APB DMA driver. This driver support the slave mode of data transfer from peripheral to memory and vice versa. The driver supports for the cyclic and non-cyclic mode of data transfer. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-06 12:25:27 +07:00
config TEGRA20_APB_DMA
bool "NVIDIA Tegra20 APB DMA support"
depends on ARCH_TEGRA
select DMA_ENGINE
help
Support for the NVIDIA Tegra20 APB DMA controller driver. The
DMA controller is having multiple DMA channel which can be
configured for different peripherals like audio, UART, SPI,
I2C etc which is in APB bus.
This DMA controller transfers data from memory to peripheral fifo
or vice versa. It does not support memory to memory data transfer.
dmaengine: add driver for Samsung s3c24xx SoCs This adds a new driver to support the s3c24xx dma using the dmaengine and makes the old one in mach-s3c24xx obsolete in the long run. Conceptually the s3c24xx-dma feels like a distant relative of the pl08x with numerous virtual channels being mapped to a lot less physical ones. The driver therefore borrows a lot from the amba-pl08x driver in this regard. Functionality-wise the driver gains a memcpy ability in addition to the slave_sg one. The driver supports both the method for requesting the peripheral used by SoCs before the S3C2443 and the different method for S3C2443 and later. On earlier SoCs the hardware channels usable for specific peripherals is constrainted while on later SoCs all channels can be used for any peripheral. Tested on a s3c2416-based board, memcpy using the dmatest module and slave_sg partially using the spi-s3c64xx driver. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-08 04:42:10 +07:00
config S3C24XX_DMAC
tristate "Samsung S3C24XX DMA support"
depends on ARCH_S3C24XX && !S3C24XX_DMA
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support for the Samsung S3C24XX DMA controller driver. The
DMA controller is having multiple DMA channels which can be
configured for different peripherals like audio, UART, SPI.
The DMA controller can transfer data from memory to peripheral,
periphal to memory, periphal to periphal and memory to memory.
dma: sh: add Kconfig This patch adds Kconfig in the drivers/dma/sh. This patch also adds a new config "SH_DMAE_BASE" and the "config SH_DMAE" depends on it. Since some drivers (e.g. sh_mmcif.c) depends on shdma-base.c if CONFIG_DMA_ENGINE=y, the "config SH_DMAE_BASE" is set as "bool". Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-23 18:00:06 +07:00
source "drivers/dma/sh/Kconfig"
dmaengine: sh: Add Support SuperH DMA Engine driver This supported all DMA channels, and it was tested in SH7722, SH7780, SH7785 and SH7763. This can not use with SH DMA API. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-07 10:26:23 +07:00
Add COH 901 318 DMA block driver v5 This patch adds support for the ST-Ericsson COH 901 318 DMA block, found in the U300 series platforms. It registers a DMA slave for device I/O and also a memcpy slave for memcpy. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-20 01:49:17 +07:00
config COH901318
bool "ST-Ericsson COH901318 DMA support"
select DMA_ENGINE
depends on ARCH_U300
help
Enable support for ST-Ericsson COH 901 318 DMA.
DMAENGINE: Support for ST-Ericssons DMA40 block v3 This is a straightforward driver for the ST-Ericsson DMA40 DMA controller found in U8500, implemented akin to the existing COH 901 318 driver. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidh Kasagar <srinidhi.kasagar@stericsson.com> Cc: STEricsson_nomadik_linux@list.st.com Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-30 20:33:42 +07:00
config STE_DMA40
bool "ST-Ericsson DMA40 support"
depends on ARCH_U8500
select DMA_ENGINE
help
Support for ST-Ericsson DMA40 controller
ppc440spe-adma: adds updated ppc440spe adma driver This patch adds new version of the PPC440SPe ADMA driver. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-12 11:24:44 +07:00
config AMCC_PPC440SPE_ADMA
tristate "AMCC PPC440SPe ADMA support"
depends on 440SPe || 440SP
select DMA_ENGINE
select ARCH_HAS_ASYNC_TX_FIND_CHANNEL
async_tx: make async_tx channel switching opt-in The majority of drivers in drivers/dma/ will never establish cross channel operation chains and do not need the extra overhead in struct dma_async_tx_descriptor. Make channel switching opt-in by default. Cc: Anatolij Gustschin <agust@denx.de> Cc: Ira Snyder <iws@ovro.caltech.edu> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Saeed Bishara <saeed@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-08 06:44:50 +07:00
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
ppc440spe-adma: adds updated ppc440spe adma driver This patch adds new version of the PPC440SPe ADMA driver. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-12 11:24:44 +07:00
help
Enable support for the AMCC PPC440SPe RAID engines.
dma: Add timb-dma Adds the support for the DMA engine withing the timberdale FPGA. The DMA channels are strict device to host, or host to device and can not be used for generic memcpy. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-26 01:44:21 +07:00
config TIMB_DMA
tristate "Timberdale FPGA DMA support"
depends on MFD_TIMBERDALE || HAS_IOMEM
select DMA_ENGINE
help
Enable support for the Timberdale FPGA DMA engine.
dmaengine: add CSR SiRFprimaII DMAC driver Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> [fixed direction enums and cyclic api based on changes already merged] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-28 09:22:39 +07:00
config SIRF_DMA
dmaengine: sirf: enable the driver support new SiRFmarco SoC The driver supports old up SiRFprimaII SoCs, this patch makes it support the new SiRFmarco as well. SiRFmarco, as a SMP SoC, adds new DMA_INT_EN_CLR and DMA_CH_LOOP_CTRL_CLR registers, to disable IRQ/Channel, we should write 1 to the corresponding bit in the two CLEAR register. Tested on SiRFmarco using SPI driver: $ /mnt/spidev-sirftest -D /dev/spidev32766.0 spi mode: 0 bits per word: 8 max speed: 500000 Hz (500 KHz) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 $ cat /proc/interrupts CPU0 CPU1 32: 1593 0 GIC sirfsoc_timer0 33: 0 3533 GIC sirfsoc_timer1 44: 0 0 GIC sirfsoc_dma 45: 16 0 GIC sirfsoc_dma 47: 6 0 GIC sirfsoc_spi 50: 5654 0 GIC sirfsoc-uart ... Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-11-01 21:54:43 +07:00
tristate "CSR SiRFprimaII/SiRFmarco DMA support"
depends on ARCH_SIRF
dmaengine: add CSR SiRFprimaII DMAC driver Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> [fixed direction enums and cyclic api based on changes already merged] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-28 09:22:39 +07:00
select DMA_ENGINE
help
Enable support for the CSR SiRFprimaII DMA engine.
dmaengine: add TI EDMA DMA engine driver Add a DMA engine driver for the TI EDMA controller. This driver is implemented as a wrapper around the existing DaVinci private DMA implementation. This approach allows for incremental conversion of each peripheral driver to the DMA engine API. The EDMA driver supports slave transfers but does not yet support cyclic transfers. Signed-off-by: Matt Porter <mporter@ti.com> Tested-by: Tom Rini <trini@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-23 08:09:34 +07:00
config TI_EDMA
dma/Kconfig: TI_EDMA needs to be boolean Fix: arch/arm/common/built-in.o: undefined reference to `edma_filter_fn' seen with "make ARCH=arm allmodconfig" Commit 6cba4355 (ARM: edma: Add DT and runtime PM support to the private EDMA API) adds a dependency on edma_filter_fn() into arch/arm/common/edma.c. Since this file is always built into the kernel, edma_filter_fn() must be built into the kernel as well. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-23 04:03:24 +07:00
bool "TI EDMA support"
dma: Allow TI_EDMA selectable for ARCH_KEYSTONE Allow the TI_EDMA to be built for ARCH_KEYSTONE which also supports the EDMA IP. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-09-30 22:04:42 +07:00
depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE
dmaengine: add TI EDMA DMA engine driver Add a DMA engine driver for the TI EDMA controller. This driver is implemented as a wrapper around the existing DaVinci private DMA implementation. This approach allows for incremental conversion of each peripheral driver to the DMA engine API. The EDMA driver supports slave transfers but does not yet support cyclic transfers. Signed-off-by: Matt Porter <mporter@ti.com> Tested-by: Tom Rini <trini@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-23 08:09:34 +07:00
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA The TI_EDMA driver unconditionally calls functions provided by the TI_PRIV_EDMA code, but it doesn't force that to be built-in. If that isn't otherwise enabled somewhere, you can get build errors like: linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:593: undefined reference to `edma_free_slot' drivers/built-in.o: In function `edma_terminate_all': linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:169: undefined reference to `edma_stop' drivers/built-in.o: In function `edma_execute': linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:122: undefined reference to `edma_write_slot' linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:149: undefined reference to `edma_link' linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:152: undefined reference to `edma_start' Make TI_EDMA select TI_PRIV_EDMA to avoid this. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Acked-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-04 20:32:03 +07:00
select TI_PRIV_EDMA
dmaengine: add TI EDMA DMA engine driver Add a DMA engine driver for the TI EDMA controller. This driver is implemented as a wrapper around the existing DaVinci private DMA implementation. This approach allows for incremental conversion of each peripheral driver to the DMA engine API. The EDMA driver supports slave transfers but does not yet support cyclic transfers. Signed-off-by: Matt Porter <mporter@ti.com> Tested-by: Tom Rini <trini@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-23 08:09:34 +07:00
default n
help
Enable support for the TI EDMA controller. This DMA
engine is found on TI DaVinci and AM33xx parts.
ppc440spe-adma: adds updated ppc440spe adma driver This patch adds new version of the PPC440SPe ADMA driver. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-12 11:24:44 +07:00
config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
bool
DMA: PL330: Add dma api driver Add DMA Engine API driver for the PL330 DMAC. This driver is supposed to be reusable by various platforms that have one or more PL330 DMACs. Atm, DMA_SLAVE and DMA_MEMCPY capabilities have been implemented. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> [dan.j.williams@intel.com: missing slab.h and ->device_control() fixups] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-24 10:28:19 +07:00
config PL330_DMA
tristate "DMA API Driver for PL330"
select DMA_ENGINE
DMA: PL330: Update PL330 DMA API driver This patch updates following 3 items. 1. Removes unneccessary code. 2. Add AMBA, PL330 configuration 3. Change the meaning of 'peri_id' variable from PL330 event number to specific dma id by user. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-02 07:44:30 +07:00
depends on ARM_AMBA
DMA: PL330: Add dma api driver Add DMA Engine API driver for the PL330 DMAC. This driver is supposed to be reusable by various platforms that have one or more PL330 DMACs. Atm, DMA_SLAVE and DMA_MEMCPY capabilities have been implemented. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> [dan.j.williams@intel.com: missing slab.h and ->device_control() fixups] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-24 10:28:19 +07:00
help
Select if your platform has one or more PL330 DMACs.
You need to provide platform specific settings via
platform_data for a dma-pl330 device.
dmaengine: Driver for Topcliff PCH DMA controller Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platforms. This adds the driver for Topcliff PCH DMA controller. The DMA channels are strictly for device to host or host to device transfers and cannot be used for generic memcpy. Signed-off-by: Yong Wang <yong.y.wang@intel.com> [kill GFP_ATOMIC, kill __raw_{read|write}l, locking fixlet] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-07-30 15:23:03 +07:00
config PCH_DMA
pch_dma: Support new device LAPIS Semiconductor ML7831 IOH ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-17 14:14:23 +07:00
tristate "Intel EG20T PCH / LAPIS Semicon IOH(ML7213/ML7223/ML7831) DMA"
dmaengine: Driver for Topcliff PCH DMA controller Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platforms. This adds the driver for Topcliff PCH DMA controller. The DMA channels are strictly for device to host or host to device transfers and cannot be used for generic memcpy. Signed-off-by: Yong Wang <yong.y.wang@intel.com> [kill GFP_ATOMIC, kill __raw_{read|write}l, locking fixlet] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-07-30 15:23:03 +07:00
depends on PCI && X86
select DMA_ENGINE
help
pch_dma: support new device ML7213 IOH Support new device OKI SEMICONDUCTOR's ML7213 IOH(Input/Output Hub) which is for IVI(In-Vehicle Infotainment) use. The ML7213 is companion chip for Intel Atom E6xx series. The ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-05 15:43:52 +07:00
Enable support for Intel EG20T PCH DMA engine.
pch_dma: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-17 14:14:22 +07:00
This driver also can be used for LAPIS Semiconductor IOH(Input/
pch_dma: Support new device LAPIS Semiconductor ML7831 IOH ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-17 14:14:23 +07:00
Output Hub), ML7213, ML7223 and ML7831.
ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
for MP(Media Phone) use and ML7831 IOH is for general purpose use.
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
dmaengine: Driver for Topcliff PCH DMA controller Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platforms. This adds the driver for Topcliff PCH DMA controller. The DMA channels are strictly for device to host or host to device transfers and cannot be used for generic memcpy. Signed-off-by: Yong Wang <yong.y.wang@intel.com> [kill GFP_ATOMIC, kill __raw_{read|write}l, locking fixlet] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-07-30 15:23:03 +07:00
dmaengine: Add Freescale i.MX SDMA support This patch adds support for the Freescale i.MX SDMA engine. The SDMA engine is a scatter/gather DMA engine which is implemented as a seperate coprocessor. SDMA needs its own firmware which is requested using the standard request_firmware mechanism. The firmware has different entry points for each peripheral type, so drivers have to pass the peripheral type to the DMA engine which in turn picks the correct firmware entry point from a table contained in the firmware image itself. The original Freescale code also supports support for transfering data to the internal SRAM which needs different entry points to the firmware. Support for this is currently not implemented. Also, support for the ASRC (asymmetric sample rate converter) is skipped. I took a very simple approach to implement dmaengine support. Only a single descriptor is statically assigned to a each channel. This means that transfers can't be queued up but only a single transfer is in progress. This simplifies implementation a lot and is sufficient for the usual device/memory transfers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Linus Walleij <linus.ml.walleij@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-30 20:56:34 +07:00
config IMX_SDMA
tristate "i.MX SDMA support"
dma i.MX: remove individual SOC dependency The individual SoC dependency in Kconfig hardly scales anymore. Instead of having such a fine grained dependency just depend on ARCH_MXC and risk that the uninformed user has to look in the help text to figure out which driver is the correct one. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-08-24 13:41:09 +07:00
depends on ARCH_MXC
dmaengine: Add Freescale i.MX SDMA support This patch adds support for the Freescale i.MX SDMA engine. The SDMA engine is a scatter/gather DMA engine which is implemented as a seperate coprocessor. SDMA needs its own firmware which is requested using the standard request_firmware mechanism. The firmware has different entry points for each peripheral type, so drivers have to pass the peripheral type to the DMA engine which in turn picks the correct firmware entry point from a table contained in the firmware image itself. The original Freescale code also supports support for transfering data to the internal SRAM which needs different entry points to the firmware. Support for this is currently not implemented. Also, support for the ASRC (asymmetric sample rate converter) is skipped. I took a very simple approach to implement dmaengine support. Only a single descriptor is statically assigned to a each channel. This means that transfers can't be queued up but only a single transfer is in progress. This simplifies implementation a lot and is sufficient for the usual device/memory transfers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Linus Walleij <linus.ml.walleij@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-30 20:56:34 +07:00
select DMA_ENGINE
help
Support the i.MX SDMA engine. This engine is integrated into
dma i.MX: remove individual SOC dependency The individual SoC dependency in Kconfig hardly scales anymore. Instead of having such a fine grained dependency just depend on ARCH_MXC and risk that the uninformed user has to look in the help text to figure out which driver is the correct one. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-08-24 13:41:09 +07:00
Freescale i.MX25/31/35/51/53 chips.
dmaengine: Add Freescale i.MX SDMA support This patch adds support for the Freescale i.MX SDMA engine. The SDMA engine is a scatter/gather DMA engine which is implemented as a seperate coprocessor. SDMA needs its own firmware which is requested using the standard request_firmware mechanism. The firmware has different entry points for each peripheral type, so drivers have to pass the peripheral type to the DMA engine which in turn picks the correct firmware entry point from a table contained in the firmware image itself. The original Freescale code also supports support for transfering data to the internal SRAM which needs different entry points to the firmware. Support for this is currently not implemented. Also, support for the ASRC (asymmetric sample rate converter) is skipped. I took a very simple approach to implement dmaengine support. Only a single descriptor is statically assigned to a each channel. This means that transfers can't be queued up but only a single transfer is in progress. This simplifies implementation a lot and is sufficient for the usual device/memory transfers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Linus Walleij <linus.ml.walleij@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-30 20:56:34 +07:00
dmaengine: Add Freescale i.MX1/21/27 DMA driver This driver is currently implemented as a user to the old i.MX DMA API. This allows us to convert each user of the old API to the dmaengine API one by one. Once this is done the old DMA driver can be merged into the i.MX dmaengine driver. V2: remove some debug leftovers and unused variables Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-06 15:25:55 +07:00
config IMX_DMA
tristate "i.MX DMA support"
dmaengine: imx: fix the build failure on x86_64 commit 6bd081277ea0 "dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c" removed the dependency in config for the imx dma driver, whereas it should depend on ARCH_MXS Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-27 15:23:00 +07:00
depends on ARCH_MXC
dmaengine: Add Freescale i.MX1/21/27 DMA driver This driver is currently implemented as a user to the old i.MX DMA API. This allows us to convert each user of the old API to the dmaengine API one by one. Once this is done the old DMA driver can be merged into the i.MX dmaengine driver. V2: remove some debug leftovers and unused variables Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-06 15:25:55 +07:00
select DMA_ENGINE
help
Support the i.MX DMA engine. This engine is integrated into
Freescale i.MX1/21/27 chips.
dmaengine: mxs-dma: add dma support for i.MX23/28 This patch adds dma support for Freescale MXS-based SoC i.MX23/28, including apbh-dma and apbx-dma. * apbh-dma and apbx-dma are supported in the driver as two mxs-dma instances. * apbh-dma is different between mx23 and mx28, hardware version register is used to differentiate. * mxs-dma supports pio function besides data transfer. The driver uses dma_data_direction DMA_NONE to identify the pio mode, and steals sgl and sg_len to get pio words and numbers from clients. * mxs dmaengine has some very specific features, like sense function and the special NAND support (nand_lock, nand_wait4ready). These are too specific to implemented in generic dmaengine driver. * The driver refers to imx-sdma and only a single descriptor is statically assigned to each channel. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-02-26 23:47:42 +07:00
config MXS_DMA
bool "MXS DMA support"
dma: enable mxs-dma for imx6q enable the mxs-dma for imx6q. Also remove the unused header file. Signed-off-by: Huang Shijie <shijie8@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-07 08:22:59 +07:00
depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q
dma: mxs-dma: use global stmp_device functionality This can get rid of the mach-dependency. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Huang Shijie <b32955@freescale.com> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Vinod Koul <vinod.koul@intel.com>
2012-05-04 19:12:15 +07:00
select STMP_DEVICE
dmaengine: mxs-dma: add dma support for i.MX23/28 This patch adds dma support for Freescale MXS-based SoC i.MX23/28, including apbh-dma and apbx-dma. * apbh-dma and apbx-dma are supported in the driver as two mxs-dma instances. * apbh-dma is different between mx23 and mx28, hardware version register is used to differentiate. * mxs-dma supports pio function besides data transfer. The driver uses dma_data_direction DMA_NONE to identify the pio mode, and steals sgl and sg_len to get pio words and numbers from clients. * mxs dmaengine has some very specific features, like sense function and the special NAND support (nand_lock, nand_wait4ready). These are too specific to implemented in generic dmaengine driver. * The driver refers to imx-sdma and only a single descriptor is statically assigned to each channel. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-02-26 23:47:42 +07:00
select DMA_ENGINE
help
Support the MXS DMA engine. This engine including APBH-DMA
and APBX-DMA is integrated into Freescale i.MX23/28 chips.
dmaengine: add ep93xx DMA support The ep93xx DMA controller has 10 independent memory to peripheral (M2P) channels, and 2 dedicated memory to memory (M2M) channels. M2M channels can also be used by SPI and IDE to perform DMA transfers to/from their memory mapped FIFOs. This driver supports both M2P and M2M channels with DMA_SLAVE, DMA_CYCLIC and DMA_MEMCPY (M2M only) capabilities. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Ryan Mallon <rmallon@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-29 17:10:02 +07:00
config EP93XX_DMA
bool "Cirrus Logic EP93xx DMA support"
depends on ARCH_EP93XX
select DMA_ENGINE
help
Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller.
DMA: sa11x0: add SA-11x0 DMA driver Add support for the SA-11x0 DMA driver, which replaces the private API version in arch/arm/mach-sa1100/dma.c. We model this as a set of virtual DMA channels, one for each request signal, and assign the virtual DMA channel to a physical DMA channel when there is work to be done. This allows DMA users to claim their channels, and hold them while not in use, without affecting the availability of the physical channels. Another advantage over this approach, compared to the private version, is that a channel can be reconfigured on the fly without having to release and re-request it - which for the IrDA driver, allows us to use DMA for SIR mode transmit without eating up three physical channels. As IrDA is half-duplex, we actually only need one physical channel, and this architecture allows us to achieve that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 04:44:07 +07:00
config DMA_SA11X0
tristate "SA-11x0 DMA support"
depends on ARCH_SA1100
select DMA_ENGINE
dmaengine: split out virtual channel DMA support from sa11x0 driver Split the virtual slave channel DMA support from the sa11x0 driver so this code can be shared with other slave DMA engine drivers. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-13 18:07:23 +07:00
select DMA_VIRTUAL_CHANNELS
DMA: sa11x0: add SA-11x0 DMA driver Add support for the SA-11x0 DMA driver, which replaces the private API version in arch/arm/mach-sa1100/dma.c. We model this as a set of virtual DMA channels, one for each request signal, and assign the virtual DMA channel to a physical DMA channel when there is work to be done. This allows DMA users to claim their channels, and hold them while not in use, without affecting the availability of the physical channels. Another advantage over this approach, compared to the private version, is that a channel can be reconfigured on the fly without having to release and re-request it - which for the IrDA driver, allows us to use DMA for SIR mode transmit without eating up three physical channels. As IrDA is half-duplex, we actually only need one physical channel, and this architecture allows us to achieve that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 04:44:07 +07:00
help
Support the DMA engine found on Intel StrongARM SA-1100 and
SA-1110 SoCs. This DMA engine can only be used with on-chip
devices.
dmaengine: mmp_tdma: add mmp tdma support Add support for two-channel dma under dmaengine support: mmp-adma and pxa910-squ Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Leo Yan <leoy@marvell.com> Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-15 10:04:08 +07:00
config MMP_TDMA
bool "MMP Two-Channel DMA support"
dmaengine: mmp_tdma: fix the arch dependency Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-22 11:59:53 +07:00
depends on ARCH_MMP
dmaengine: mmp_tdma: add mmp tdma support Add support for two-channel dma under dmaengine support: mmp-adma and pxa910-squ Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Leo Yan <leoy@marvell.com> Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-15 10:04:08 +07:00
select DMA_ENGINE
help
Support the MMP Two-Channel DMA engine.
This engine used for MMP Audio DMA and pxa910 SQU.
Say Y here if you enabled MMP ADMA, otherwise say N.
dmaengine: add OMAP DMA engine driver Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-13 18:10:24 +07:00
config DMA_OMAP
tristate "OMAP DMA support"
depends on ARCH_OMAP
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 17:13:04 +07:00
config TI_CPPI41
tristate "AM33xx CPPI41 DMA support"
depends on ARCH_OMAP
select DMA_ENGINE
help
The Communications Port Programming Interface (CPPI) 4.1 DMA engine
is currently used by the USB driver on AM335x platforms.
dmaengine: mmp-pdma support 1. virtual channel vs. physical channel Virtual channel is managed by dmaengine Physical channel handling resource, such as irq Physical channel is alloced dynamically as descending priority, freed immediately when irq done. The availble highest priority physically channel will alwayes be alloced Issue pending list -> alloc highest dma physically channel available -> dma done -> free physically channel 2. list: running list & pending list submit: desc list -> pending list issue_pending_list: if (IDLE) pending list -> running list; free pending list (RUN) irq: free running list (IDLE) check pendlist -> pending list -> running list; free pending list (RUN) 3. irq: Each list generate one irq, calling callback One list may contain several desc chain, in such case, make sure only the last desc list generate irq. 4. async Submit will add desc chain to pending list, which can be multi-called If multi desc chain is submitted, only the last desc would generate irq -> call back If IDLE, issue_pending_list start pending_list, transforming pendlist to running list If RUN, irq will start pending list 5. test 5.1 pxa3xx_nand on pxa910 5.2 insmod dmatest.ko (threads_per_chan=y) By default drivers/dma/dmatest.c test every channel and test memcpy with 1 threads per channel Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-03 10:03:45 +07:00
config MMP_PDMA
bool "MMP PDMA support"
depends on (ARCH_MMP || ARCH_PXA)
select DMA_ENGINE
help
treewide: Fix typo in Kconfig Correct spelling typo in Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-29 18:54:15 +07:00
Support the MMP PDMA engine for PXA and MMP platform.
dmaengine: mmp-pdma support 1. virtual channel vs. physical channel Virtual channel is managed by dmaengine Physical channel handling resource, such as irq Physical channel is alloced dynamically as descending priority, freed immediately when irq done. The availble highest priority physically channel will alwayes be alloced Issue pending list -> alloc highest dma physically channel available -> dma done -> free physically channel 2. list: running list & pending list submit: desc list -> pending list issue_pending_list: if (IDLE) pending list -> running list; free pending list (RUN) irq: free running list (IDLE) check pendlist -> pending list -> running list; free pending list (RUN) 3. irq: Each list generate one irq, calling callback One list may contain several desc chain, in such case, make sure only the last desc list generate irq. 4. async Submit will add desc chain to pending list, which can be multi-called If multi desc chain is submitted, only the last desc would generate irq -> call back If IDLE, issue_pending_list start pending_list, transforming pendlist to running list If RUN, irq will start pending list 5. test 5.1 pxa3xx_nand on pxa910 5.2 insmod dmatest.ko (threads_per_chan=y) By default drivers/dma/dmatest.c test every channel and test memcpy with 1 threads per channel Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-03 10:03:45 +07:00
dma: Add a jz4740 dmaengine driver This patch adds dmaengine support for the JZ4740 DMA controller. For now the driver will be a wrapper around the custom JZ4740 DMA API. Once all users of the custom JZ4740 DMA API have been converted to the dmaengine API the custom API will be removed and direct hardware access will be added to the dmaengine driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-05-30 23:25:02 +07:00
config DMA_JZ4740
tristate "JZ4740 DMA support"
depends on MACH_JZ4740
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
dmaengine: Add hisilicon k3 DMA engine driver Add dmaengine driver for hisilicon k3 platform based on virt_dma Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Tested-by: Kai Yang <jean.yangkai@huawei.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-27 09:20:10 +07:00
config K3_DMA
tristate "Hisilicon K3 DMA support"
depends on ARCH_HI3xxx
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support the DMA engine for Hisilicon K3 platform
devices.
[I/OAT]: DMA memcpy subsystem Provides an API for offloading memory copies to DMA devices Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-24 07:18:44 +07:00
config DMA_ENGINE
I/OAT: Add DCA services Add code to connect to the DCA driver and provide cpu tags for use by drivers that would like to use Direct Cache Access hints. [Adrian Bunk] Several Kconfig cleanup items [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when built for uni-processor Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 15:27:42 +07:00
bool
[I/OAT]: DMA memcpy subsystem Provides an API for offloading memory copies to DMA devices Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-24 07:18:44 +07:00
dmaengine: split out virtual channel DMA support from sa11x0 driver Split the virtual slave channel DMA support from the sa11x0 driver so this code can be shared with other slave DMA engine drivers. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-13 18:07:23 +07:00
config DMA_VIRTUAL_CHANNELS
tristate
dma: acpi-dma: introduce ACPI DMA helpers There is a new generic API to get a DMA channel for a slave device (commit 9a6cecc8 "dmaengine: add helper function to request a slave DMA channel"). In similar fashion to the DT case (commit aa3da644 "of: Add generic device tree DMA helpers") we introduce helpers to the DMAC drivers which are enumerated by ACPI. The proposed extension provides the following API calls: acpi_dma_controller_register(), devm_acpi_dma_controller_register() acpi_dma_controller_free(), devm_acpi_dma_controller_free() acpi_dma_simple_xlate() acpi_dma_request_slave_chan_by_index() acpi_dma_request_slave_chan_by_name() The first two should be used, for example, at probe() and remove() of the corresponding DMAC driver. At the register stage the DMAC driver supplies a custom xlate() function to translate a struct dma_spec into struct dma_chan. Accordingly to the ACPI Fixed DMA resource specification the only two pieces of information the slave device has are the channel id and the request line (slave id). Those two are represented by struct dma_spec. The acpi_dma_request_slave_chan_by_index() provides access to the specifix FixedDMA resource by its index. Whereas dma_request_slave_channel() takes a string parameter to identify the DMA resources required by the slave device. To make a slave device driver work with both DeviceTree and ACPI enumeration a simple convention is established: "tx" corresponds to the index 0 and "rx" to the index 1. In case of robust configuration the slave device driver unfortunately needs to call acpi_dma_request_slave_chan_by_index() directly. Additionally the patch provides "managed" version of the register/free pair i.e. devm_acpi_dma_controller_register() and devm_acpi_dma_controller_free(). Usually, the driver uses only devm_acpi_dma_controller_register(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-09 18:05:43 +07:00
config DMA_ACPI
def_bool y
depends on ACPI
dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c as requested by Rob Suggested-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-13 00:15:02 +07:00
config DMA_OF
def_bool y
depends on OF
[I/OAT]: Setup the networking subsystem as a DMA client Attempts to allocate per-CPU DMA channels Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18 11:24:58 +07:00
comment "DMA Clients"
I/OAT: Add DCA services Add code to connect to the DCA driver and provide cpu tags for use by drivers that would like to use Direct Cache Access hints. [Adrian Bunk] Several Kconfig cleanup items [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when built for uni-processor Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 15:27:42 +07:00
depends on DMA_ENGINE
[I/OAT]: Setup the networking subsystem as a DMA client Attempts to allocate per-CPU DMA channels Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18 11:24:58 +07:00
config NET_DMA
bool "Network: TCP receive copy offload"
depends on DMA_ENGINE && NET
dmaengine: remove arch dependency from DMADEVICES The dependency is redundant since all drivers set their specific arch dependencies. The NET_DMA option is modified to be enabled only on platforms where it is known to have a positive effect. HAS_DMA is added as an explicit dependency for the DMADEVICES menu. Acked-by: Adrian Bunk <bunk@kernel.org> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-06-27 15:21:11 +07:00
default (INTEL_IOATDMA || FSL_DMA)
I/OAT: Add DCA services Add code to connect to the DCA driver and provide cpu tags for use by drivers that would like to use Direct Cache Access hints. [Adrian Bunk] Several Kconfig cleanup items [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when built for uni-processor Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 15:27:42 +07:00
help
[I/OAT]: Setup the networking subsystem as a DMA client Attempts to allocate per-CPU DMA channels Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18 11:24:58 +07:00
This enables the use of DMA engines in the network stack to
offload receive copy-to-user operations, freeing CPU cycles.
dmaengine: remove arch dependency from DMADEVICES The dependency is redundant since all drivers set their specific arch dependencies. The NET_DMA option is modified to be enabled only on platforms where it is known to have a positive effect. HAS_DMA is added as an explicit dependency for the DMADEVICES menu. Acked-by: Adrian Bunk <bunk@kernel.org> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-06-27 15:21:11 +07:00
Say Y here if you enabled INTEL_IOATDMA or FSL_DMA, otherwise
say N.
[I/OAT]: Setup the networking subsystem as a DMA client Attempts to allocate per-CPU DMA channels Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18 11:24:58 +07:00
dmaengine: allow dma support for async_tx to be toggled Provide a config option for blocking the allocation of dma channels to the async_tx api. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25 23:13:25 +07:00
config ASYNC_TX_DMA
bool "Async_tx: Offload support for the async_tx api"
async_tx: remove HIGHMEM64G restriction This restriction prevented ASYNC_TX_DMA from being enabled on platform configurations where DMA address conversion could not be performed in place on the stack. Since commit 04ce9ab3 ("async_xor: permit callers to pass in a 'dma/page scribble' region") the async_tx api now either uses a caller provided 'scribble' buffer, or performs the conversion in place when sizeof(dma_addr_t) <= sizeof(struct page *). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-09 05:06:10 +07:00
depends on DMA_ENGINE
dmaengine: allow dma support for async_tx to be toggled Provide a config option for blocking the allocation of dma channels to the async_tx api. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25 23:13:25 +07:00
help
This allows the async_tx api to take advantage of offload engines for
memcpy, memset, xor, and raid6 p+q operations. If your platform has
a dma engine that can perform raid operations and you have enabled
MD_RAID456 say Y.
If unsure, say N.
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 01:58:45 +07:00
config DMATEST
tristate "DMA Test client"
depends on DMA_ENGINE
help
Simple DMA test client. Say N unless you're debugging a
DMA Device driver.
I/OAT: Add DCA services Add code to connect to the DCA driver and provide cpu tags for use by drivers that would like to use Direct Cache Access hints. [Adrian Bunk] Several Kconfig cleanup items [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when built for uni-processor Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 15:27:42 +07:00
endif
Reference in New Issue Copy Permalink