drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
/*
|
|
|
|
* Copyright 2012 Red Hat Inc.
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the
|
|
|
|
* "Software"), to deal in the Software without restriction, including
|
|
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
|
|
* the following conditions:
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
|
|
|
|
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
|
|
|
|
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
|
|
|
|
* USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice (including the
|
|
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
|
|
* of the Software.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* Authors: Dave Airlie <airlied@redhat.com>
|
|
|
|
*/
|
2012-10-03 00:01:07 +07:00
|
|
|
#include <drm/drmP.h>
|
2017-04-24 11:50:22 +07:00
|
|
|
#include <drm/ttm/ttm_page_alloc.h>
|
|
|
|
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
#include "ast_drv.h"
|
|
|
|
|
|
|
|
static inline struct ast_private *
|
|
|
|
ast_bdev(struct ttm_bo_device *bd)
|
|
|
|
{
|
|
|
|
return container_of(bd, struct ast_private, ttm.bdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_bo_ttm_destroy(struct ttm_buffer_object *tbo)
|
|
|
|
{
|
|
|
|
struct ast_bo *bo;
|
|
|
|
|
|
|
|
bo = container_of(tbo, struct ast_bo, bo);
|
|
|
|
|
|
|
|
drm_gem_object_release(&bo->gem);
|
|
|
|
kfree(bo);
|
|
|
|
}
|
|
|
|
|
2014-01-06 21:57:48 +07:00
|
|
|
static bool ast_ttm_bo_is_ast_bo(struct ttm_buffer_object *bo)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
{
|
|
|
|
if (bo->destroy == &ast_bo_ttm_destroy)
|
|
|
|
return true;
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ast_bo_init_mem_type(struct ttm_bo_device *bdev, uint32_t type,
|
|
|
|
struct ttm_mem_type_manager *man)
|
|
|
|
{
|
|
|
|
switch (type) {
|
|
|
|
case TTM_PL_SYSTEM:
|
|
|
|
man->flags = TTM_MEMTYPE_FLAG_MAPPABLE;
|
|
|
|
man->available_caching = TTM_PL_MASK_CACHING;
|
|
|
|
man->default_caching = TTM_PL_FLAG_CACHED;
|
|
|
|
break;
|
|
|
|
case TTM_PL_VRAM:
|
|
|
|
man->func = &ttm_bo_manager_func;
|
|
|
|
man->flags = TTM_MEMTYPE_FLAG_FIXED |
|
|
|
|
TTM_MEMTYPE_FLAG_MAPPABLE;
|
|
|
|
man->available_caching = TTM_PL_FLAG_UNCACHED |
|
|
|
|
TTM_PL_FLAG_WC;
|
|
|
|
man->default_caching = TTM_PL_FLAG_WC;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DRM_ERROR("Unsupported memory type %u\n", (unsigned)type);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ast_bo_evict_flags(struct ttm_buffer_object *bo, struct ttm_placement *pl)
|
|
|
|
{
|
|
|
|
struct ast_bo *astbo = ast_bo(bo);
|
|
|
|
|
|
|
|
if (!ast_ttm_bo_is_ast_bo(bo))
|
|
|
|
return;
|
|
|
|
|
|
|
|
ast_ttm_placement(astbo, TTM_PL_FLAG_SYSTEM);
|
|
|
|
*pl = astbo->placement;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ast_bo_verify_access(struct ttm_buffer_object *bo, struct file *filp)
|
|
|
|
{
|
2013-08-25 23:28:59 +07:00
|
|
|
struct ast_bo *astbo = ast_bo(bo);
|
|
|
|
|
2016-09-01 19:48:33 +07:00
|
|
|
return drm_vma_node_verify_access(&astbo->gem.vma_node,
|
|
|
|
filp->private_data);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ast_ttm_io_mem_reserve(struct ttm_bo_device *bdev,
|
|
|
|
struct ttm_mem_reg *mem)
|
|
|
|
{
|
|
|
|
struct ttm_mem_type_manager *man = &bdev->man[mem->mem_type];
|
|
|
|
struct ast_private *ast = ast_bdev(bdev);
|
|
|
|
|
|
|
|
mem->bus.addr = NULL;
|
|
|
|
mem->bus.offset = 0;
|
|
|
|
mem->bus.size = mem->num_pages << PAGE_SHIFT;
|
|
|
|
mem->bus.base = 0;
|
|
|
|
mem->bus.is_iomem = false;
|
|
|
|
if (!(man->flags & TTM_MEMTYPE_FLAG_MAPPABLE))
|
|
|
|
return -EINVAL;
|
|
|
|
switch (mem->mem_type) {
|
|
|
|
case TTM_PL_SYSTEM:
|
|
|
|
/* system memory */
|
|
|
|
return 0;
|
|
|
|
case TTM_PL_VRAM:
|
|
|
|
mem->bus.offset = mem->start << PAGE_SHIFT;
|
|
|
|
mem->bus.base = pci_resource_start(ast->dev->pdev, 0);
|
|
|
|
mem->bus.is_iomem = true;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_ttm_io_mem_free(struct ttm_bo_device *bdev, struct ttm_mem_reg *mem)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_ttm_backend_destroy(struct ttm_tt *tt)
|
|
|
|
{
|
|
|
|
ttm_tt_fini(tt);
|
|
|
|
kfree(tt);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct ttm_backend_func ast_tt_backend_func = {
|
|
|
|
.destroy = &ast_ttm_backend_destroy,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
2018-02-22 16:18:14 +07:00
|
|
|
static struct ttm_tt *ast_ttm_tt_create(struct ttm_buffer_object *bo,
|
|
|
|
uint32_t page_flags)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
{
|
|
|
|
struct ttm_tt *tt;
|
|
|
|
|
|
|
|
tt = kzalloc(sizeof(struct ttm_tt), GFP_KERNEL);
|
|
|
|
if (tt == NULL)
|
|
|
|
return NULL;
|
|
|
|
tt->func = &ast_tt_backend_func;
|
2018-02-22 16:18:14 +07:00
|
|
|
if (ttm_tt_init(tt, bo, page_flags)) {
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
kfree(tt);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
return tt;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct ttm_bo_driver ast_bo_driver = {
|
|
|
|
.ttm_tt_create = ast_ttm_tt_create,
|
|
|
|
.init_mem_type = ast_bo_init_mem_type,
|
2016-08-30 22:26:04 +07:00
|
|
|
.eviction_valuable = ttm_bo_eviction_valuable,
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
.evict_flags = ast_bo_evict_flags,
|
2016-06-06 15:17:52 +07:00
|
|
|
.move = NULL,
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
.verify_access = ast_bo_verify_access,
|
|
|
|
.io_mem_reserve = &ast_ttm_io_mem_reserve,
|
|
|
|
.io_mem_free = &ast_ttm_io_mem_free,
|
|
|
|
};
|
|
|
|
|
|
|
|
int ast_mm_init(struct ast_private *ast)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct drm_device *dev = ast->dev;
|
|
|
|
struct ttm_bo_device *bdev = &ast->ttm.bdev;
|
|
|
|
|
|
|
|
ret = ttm_bo_device_init(&ast->ttm.bdev,
|
2013-08-14 00:10:30 +07:00
|
|
|
&ast_bo_driver,
|
|
|
|
dev->anon_inode->i_mapping,
|
|
|
|
DRM_FILE_PAGE_OFFSET,
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
true);
|
|
|
|
if (ret) {
|
|
|
|
DRM_ERROR("Error initialising bo driver; %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = ttm_bo_init_mm(bdev, TTM_PL_VRAM,
|
|
|
|
ast->vram_size >> PAGE_SHIFT);
|
|
|
|
if (ret) {
|
|
|
|
DRM_ERROR("Failed ttm VRAM init: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2016-10-24 12:37:48 +07:00
|
|
|
arch_io_reserve_memtype_wc(pci_resource_start(dev->pdev, 0),
|
|
|
|
pci_resource_len(dev->pdev, 0));
|
2013-05-14 06:58:41 +07:00
|
|
|
ast->fb_mtrr = arch_phys_wc_add(pci_resource_start(dev->pdev, 0),
|
|
|
|
pci_resource_len(dev->pdev, 0));
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void ast_mm_fini(struct ast_private *ast)
|
|
|
|
{
|
2016-10-24 12:37:48 +07:00
|
|
|
struct drm_device *dev = ast->dev;
|
|
|
|
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
ttm_bo_device_release(&ast->ttm.bdev);
|
|
|
|
|
2013-05-14 06:58:41 +07:00
|
|
|
arch_phys_wc_del(ast->fb_mtrr);
|
2016-10-24 12:37:48 +07:00
|
|
|
arch_io_free_memtype_wc(pci_resource_start(dev->pdev, 0),
|
|
|
|
pci_resource_len(dev->pdev, 0));
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
void ast_ttm_placement(struct ast_bo *bo, int domain)
|
|
|
|
{
|
|
|
|
u32 c = 0;
|
2014-08-27 18:16:04 +07:00
|
|
|
unsigned i;
|
|
|
|
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
bo->placement.placement = bo->placements;
|
|
|
|
bo->placement.busy_placement = bo->placements;
|
|
|
|
if (domain & TTM_PL_FLAG_VRAM)
|
2014-08-27 18:16:04 +07:00
|
|
|
bo->placements[c++].flags = TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED | TTM_PL_FLAG_VRAM;
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
if (domain & TTM_PL_FLAG_SYSTEM)
|
2014-09-12 11:32:40 +07:00
|
|
|
bo->placements[c++].flags = TTM_PL_FLAG_CACHED | TTM_PL_FLAG_SYSTEM;
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
if (!c)
|
2014-09-12 11:32:40 +07:00
|
|
|
bo->placements[c++].flags = TTM_PL_FLAG_CACHED | TTM_PL_FLAG_SYSTEM;
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
bo->placement.num_placement = c;
|
|
|
|
bo->placement.num_busy_placement = c;
|
2014-08-27 18:16:04 +07:00
|
|
|
for (i = 0; i < c; ++i) {
|
|
|
|
bo->placements[i].fpfn = 0;
|
|
|
|
bo->placements[i].lpfn = 0;
|
|
|
|
}
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
int ast_bo_create(struct drm_device *dev, int size, int align,
|
|
|
|
uint32_t flags, struct ast_bo **pastbo)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = dev->dev_private;
|
|
|
|
struct ast_bo *astbo;
|
|
|
|
size_t acc_size;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
astbo = kzalloc(sizeof(struct ast_bo), GFP_KERNEL);
|
|
|
|
if (!astbo)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
ret = drm_gem_object_init(dev, &astbo->gem, size);
|
2017-07-18 21:47:38 +07:00
|
|
|
if (ret)
|
|
|
|
goto error;
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
|
|
|
|
astbo->bo.bdev = &ast->ttm.bdev;
|
|
|
|
|
|
|
|
ast_ttm_placement(astbo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM);
|
|
|
|
|
|
|
|
acc_size = ttm_bo_dma_acc_size(&ast->ttm.bdev, size,
|
|
|
|
sizeof(struct ast_bo));
|
|
|
|
|
|
|
|
ret = ttm_bo_init(&ast->ttm.bdev, &astbo->bo, size,
|
|
|
|
ttm_bo_type_device, &astbo->placement,
|
2018-02-22 21:52:31 +07:00
|
|
|
align >> PAGE_SHIFT, false, acc_size,
|
2014-01-09 17:03:15 +07:00
|
|
|
NULL, NULL, ast_bo_ttm_destroy);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
if (ret)
|
2017-07-18 21:47:38 +07:00
|
|
|
goto error;
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
|
|
|
|
*pastbo = astbo;
|
|
|
|
return 0;
|
2017-07-18 21:47:38 +07:00
|
|
|
error:
|
|
|
|
kfree(astbo);
|
|
|
|
return ret;
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline u64 ast_bo_gpu_offset(struct ast_bo *bo)
|
|
|
|
{
|
|
|
|
return bo->bo.offset;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ast_bo_pin(struct ast_bo *bo, u32 pl_flag, u64 *gpu_addr)
|
|
|
|
{
|
2017-04-12 19:24:39 +07:00
|
|
|
struct ttm_operation_ctx ctx = { false, false };
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
int i, ret;
|
|
|
|
|
|
|
|
if (bo->pin_count) {
|
|
|
|
bo->pin_count++;
|
|
|
|
if (gpu_addr)
|
|
|
|
*gpu_addr = ast_bo_gpu_offset(bo);
|
|
|
|
}
|
|
|
|
|
|
|
|
ast_ttm_placement(bo, pl_flag);
|
|
|
|
for (i = 0; i < bo->placement.num_placement; i++)
|
2014-08-27 18:16:04 +07:00
|
|
|
bo->placements[i].flags |= TTM_PL_FLAG_NO_EVICT;
|
2017-04-12 19:24:39 +07:00
|
|
|
ret = ttm_bo_validate(&bo->bo, &bo->placement, &ctx);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
bo->pin_count = 1;
|
|
|
|
if (gpu_addr)
|
|
|
|
*gpu_addr = ast_bo_gpu_offset(bo);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ast_bo_unpin(struct ast_bo *bo)
|
|
|
|
{
|
2017-04-12 19:24:39 +07:00
|
|
|
struct ttm_operation_ctx ctx = { false, false };
|
2017-07-18 21:47:36 +07:00
|
|
|
int i;
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
if (!bo->pin_count) {
|
|
|
|
DRM_ERROR("unpin bad %p\n", bo);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
bo->pin_count--;
|
|
|
|
if (bo->pin_count)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
for (i = 0; i < bo->placement.num_placement ; i++)
|
2014-08-27 18:16:04 +07:00
|
|
|
bo->placements[i].flags &= ~TTM_PL_FLAG_NO_EVICT;
|
2017-04-12 19:24:39 +07:00
|
|
|
return ttm_bo_validate(&bo->bo, &bo->placement, &ctx);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
int ast_bo_push_sysram(struct ast_bo *bo)
|
|
|
|
{
|
2017-04-12 19:24:39 +07:00
|
|
|
struct ttm_operation_ctx ctx = { false, false };
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
int i, ret;
|
|
|
|
if (!bo->pin_count) {
|
|
|
|
DRM_ERROR("unpin bad %p\n", bo);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
bo->pin_count--;
|
|
|
|
if (bo->pin_count)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (bo->kmap.virtual)
|
|
|
|
ttm_bo_kunmap(&bo->kmap);
|
|
|
|
|
|
|
|
ast_ttm_placement(bo, TTM_PL_FLAG_SYSTEM);
|
|
|
|
for (i = 0; i < bo->placement.num_placement ; i++)
|
2014-08-27 18:16:04 +07:00
|
|
|
bo->placements[i].flags |= TTM_PL_FLAG_NO_EVICT;
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
|
2017-04-12 19:24:39 +07:00
|
|
|
ret = ttm_bo_validate(&bo->bo, &bo->placement, &ctx);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
if (ret) {
|
|
|
|
DRM_ERROR("pushing to VRAM failed\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ast_mmap(struct file *filp, struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
struct drm_file *file_priv;
|
|
|
|
struct ast_private *ast;
|
|
|
|
|
|
|
|
if (unlikely(vma->vm_pgoff < DRM_FILE_PAGE_OFFSET))
|
2014-09-23 20:46:47 +07:00
|
|
|
return -EINVAL;
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
|
|
|
|
file_priv = filp->private_data;
|
|
|
|
ast = file_priv->minor->dev->dev_private;
|
|
|
|
return ttm_bo_mmap(filp, vma, &ast->ttm.bdev);
|
|
|
|
}
|