2019-05-27 13:55:05 +07:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
2005-04-17 05:20:36 +07:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2001,2002,2003 Broadcom Corporation
|
|
|
|
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* BCM1250-specific PCI support
|
|
|
|
*
|
|
|
|
* This module provides the glue between Linux's PCI subsystem
|
|
|
|
* and the hardware. We basically provide glue for accessing
|
|
|
|
* configuration space, and set up the translation for I/O
|
|
|
|
* space accesses.
|
|
|
|
*
|
|
|
|
* To access configuration space, we use ioremap. In the 32-bit
|
|
|
|
* kernel, this consumes either 4 or 8 page table pages, and 16MB of
|
|
|
|
* kernel mapped memory. Hopefully neither of these should be a huge
|
|
|
|
* problem.
|
|
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/console.h>
|
|
|
|
#include <linux/tty.h>
|
2010-04-22 01:57:08 +07:00
|
|
|
#include <linux/vt.h>
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
|
|
|
|
#include <asm/sibyte/sb1250_defs.h>
|
|
|
|
#include <asm/sibyte/sb1250_regs.h>
|
|
|
|
#include <asm/sibyte/sb1250_scd.h>
|
|
|
|
#include <asm/sibyte/board.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Macros for calculating offsets into config space given a device
|
|
|
|
* structure or dev/fun/reg
|
|
|
|
*/
|
2007-10-12 05:46:15 +07:00
|
|
|
#define CFGOFFSET(bus, devfn, where) (((bus)<<16) + ((devfn)<<8) + (where))
|
|
|
|
#define CFGADDR(bus, devfn, where) CFGOFFSET((bus)->number, (devfn), where)
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
static void *cfg_space;
|
|
|
|
|
2013-01-22 18:59:30 +07:00
|
|
|
#define PCI_BUS_ENABLED 1
|
|
|
|
#define LDT_BUS_ENABLED 2
|
|
|
|
#define PCI_DEVICE_MODE 4
|
2005-04-17 05:20:36 +07:00
|
|
|
|
2009-09-17 07:25:07 +07:00
|
|
|
static int sb1250_bus_status;
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
#define PCI_BRIDGE_DEVICE 0
|
|
|
|
#define LDT_BRIDGE_DEVICE 1
|
|
|
|
|
|
|
|
#ifdef CONFIG_SIBYTE_HAS_LDT
|
|
|
|
/*
|
|
|
|
* HT's level-sensitive interrupts require EOI, which is generated
|
|
|
|
* through a 4MB memory-mapped region
|
|
|
|
*/
|
|
|
|
unsigned long ldt_eoi_space;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Read/write 32-bit values in config space.
|
|
|
|
*/
|
|
|
|
static inline u32 READCFG32(u32 addr)
|
|
|
|
{
|
|
|
|
return *(u32 *) (cfg_space + (addr & ~3));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void WRITECFG32(u32 addr, u32 data)
|
|
|
|
{
|
|
|
|
*(u32 *) (cfg_space + (addr & ~3)) = data;
|
|
|
|
}
|
|
|
|
|
2007-07-10 23:33:00 +07:00
|
|
|
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
2005-04-17 05:20:36 +07:00
|
|
|
{
|
|
|
|
return dev->irq;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Do platform specific device initialization at pci_enable_device() time */
|
|
|
|
int pcibios_plat_dev_init(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Some checks before doing config cycles:
|
|
|
|
* In PCI Device Mode, hide everything on bus 0 except the LDT host
|
|
|
|
* bridge. Otherwise, access is controlled by bridge MasterEn bits.
|
|
|
|
*/
|
|
|
|
static int sb1250_pci_can_access(struct pci_bus *bus, int devfn)
|
|
|
|
{
|
|
|
|
u32 devno;
|
|
|
|
|
|
|
|
if (!(sb1250_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (bus->number == 0) {
|
|
|
|
devno = PCI_SLOT(devfn);
|
|
|
|
if (devno == LDT_BRIDGE_DEVICE)
|
|
|
|
return (sb1250_bus_status & LDT_BUS_ENABLED) != 0;
|
|
|
|
else if (sb1250_bus_status & PCI_DEVICE_MODE)
|
|
|
|
return 0;
|
|
|
|
else
|
|
|
|
return 1;
|
|
|
|
} else
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Read/write access functions for various sizes of values
|
|
|
|
* in config space. Return all 1's for disallowed accesses
|
|
|
|
* for a kludgy but adequate simulation of master aborts.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int sb1250_pcibios_read(struct pci_bus *bus, unsigned int devfn,
|
|
|
|
int where, int size, u32 * val)
|
|
|
|
{
|
|
|
|
u32 data = 0;
|
|
|
|
|
|
|
|
if ((size == 2) && (where & 1))
|
|
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
else if ((size == 4) && (where & 3))
|
|
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
|
|
|
|
if (sb1250_pci_can_access(bus, devfn))
|
|
|
|
data = READCFG32(CFGADDR(bus, devfn, where));
|
|
|
|
else
|
|
|
|
data = 0xFFFFFFFF;
|
|
|
|
|
|
|
|
if (size == 1)
|
|
|
|
*val = (data >> ((where & 3) << 3)) & 0xff;
|
|
|
|
else if (size == 2)
|
|
|
|
*val = (data >> ((where & 3) << 3)) & 0xffff;
|
|
|
|
else
|
|
|
|
*val = data;
|
|
|
|
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sb1250_pcibios_write(struct pci_bus *bus, unsigned int devfn,
|
|
|
|
int where, int size, u32 val)
|
|
|
|
{
|
|
|
|
u32 cfgaddr = CFGADDR(bus, devfn, where);
|
|
|
|
u32 data = 0;
|
|
|
|
|
|
|
|
if ((size == 2) && (where & 1))
|
|
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
else if ((size == 4) && (where & 3))
|
|
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
|
|
|
|
if (!sb1250_pci_can_access(bus, devfn))
|
|
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
|
|
|
|
data = READCFG32(cfgaddr);
|
|
|
|
|
|
|
|
if (size == 1)
|
|
|
|
data = (data & ~(0xff << ((where & 3) << 3))) |
|
|
|
|
(val << ((where & 3) << 3));
|
|
|
|
else if (size == 2)
|
|
|
|
data = (data & ~(0xffff << ((where & 3) << 3))) |
|
|
|
|
(val << ((where & 3) << 3));
|
|
|
|
else
|
|
|
|
data = val;
|
|
|
|
|
|
|
|
WRITECFG32(cfgaddr, data);
|
|
|
|
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct pci_ops sb1250_pci_ops = {
|
|
|
|
.read = sb1250_pcibios_read,
|
|
|
|
.write = sb1250_pcibios_write,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct resource sb1250_mem_resource = {
|
|
|
|
.name = "SB1250 PCI MEM",
|
|
|
|
.start = 0x40000000UL,
|
|
|
|
.end = 0x5fffffffUL,
|
|
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct resource sb1250_io_resource = {
|
|
|
|
.name = "SB1250 PCI I/O",
|
|
|
|
.start = 0x00000000UL,
|
|
|
|
.end = 0x01ffffffUL,
|
|
|
|
.flags = IORESOURCE_IO,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct pci_controller sb1250_controller = {
|
|
|
|
.pci_ops = &sb1250_pci_ops,
|
|
|
|
.mem_resource = &sb1250_mem_resource,
|
|
|
|
.io_resource = &sb1250_io_resource,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init sb1250_pcibios_init(void)
|
|
|
|
{
|
2008-06-09 23:20:03 +07:00
|
|
|
void __iomem *io_map_base;
|
2005-04-17 05:20:36 +07:00
|
|
|
uint32_t cmdreg;
|
|
|
|
uint64_t reg;
|
|
|
|
|
|
|
|
/* CFE will assign PCI resources */
|
2012-02-24 10:18:57 +07:00
|
|
|
pci_set_flags(PCI_PROBE_ONLY);
|
2005-04-17 05:20:36 +07:00
|
|
|
|
|
|
|
/* Avoid ISA compat ranges. */
|
|
|
|
PCIBIOS_MIN_IO = 0x00008000UL;
|
|
|
|
PCIBIOS_MIN_MEM = 0x01000000UL;
|
|
|
|
|
|
|
|
/* Set I/O resource limits. */
|
|
|
|
ioport_resource.end = 0x01ffffffUL; /* 32MB accessible by sb1250 */
|
|
|
|
iomem_resource.end = 0xffffffffUL; /* no HT support yet */
|
|
|
|
|
|
|
|
cfg_space =
|
|
|
|
ioremap(A_PHYS_LDTPCI_CFG_MATCH_BITS, 16 * 1024 * 1024);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* See if the PCI bus has been configured by the firmware.
|
|
|
|
*/
|
2007-03-24 21:26:13 +07:00
|
|
|
reg = __raw_readq(IOADDR(A_SCD_SYSTEM_CFG));
|
2005-04-17 05:20:36 +07:00
|
|
|
if (!(reg & M_SYS_PCI_HOST)) {
|
|
|
|
sb1250_bus_status |= PCI_DEVICE_MODE;
|
|
|
|
} else {
|
|
|
|
cmdreg =
|
|
|
|
READCFG32(CFGOFFSET
|
|
|
|
(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
|
|
|
|
PCI_COMMAND));
|
|
|
|
if (!(cmdreg & PCI_COMMAND_MASTER)) {
|
|
|
|
printk
|
2013-01-22 18:59:30 +07:00
|
|
|
("PCI: Skipping PCI probe. Bus is not initialized.\n");
|
2005-04-17 05:20:36 +07:00
|
|
|
iounmap(cfg_space);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
sb1250_bus_status |= PCI_BUS_ENABLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Establish mappings in KSEG2 (kernel virtual) to PCI I/O
|
|
|
|
* space. Use "match bytes" policy to make everything look
|
|
|
|
* little-endian. So, you need to also set
|
|
|
|
* CONFIG_SWAP_IO_SPACE, but this is the combination that
|
|
|
|
* works correctly with most of Linux's drivers.
|
|
|
|
* XXX ehs: Should this happen in PCI Device mode?
|
|
|
|
*/
|
2008-06-09 23:20:03 +07:00
|
|
|
io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
|
2010-04-22 01:57:08 +07:00
|
|
|
sb1250_controller.io_map_base = (unsigned long)io_map_base;
|
2008-06-09 23:20:03 +07:00
|
|
|
set_io_port_base((unsigned long)io_map_base);
|
|
|
|
|
2005-04-17 05:20:36 +07:00
|
|
|
#ifdef CONFIG_SIBYTE_HAS_LDT
|
|
|
|
/*
|
|
|
|
* Also check the LDT bridge's enable, just in case we didn't
|
|
|
|
* initialize that one.
|
|
|
|
*/
|
|
|
|
|
|
|
|
cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(LDT_BRIDGE_DEVICE, 0),
|
|
|
|
PCI_COMMAND));
|
|
|
|
if (cmdreg & PCI_COMMAND_MASTER) {
|
|
|
|
sb1250_bus_status |= LDT_BUS_ENABLED;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Need bits 23:16 to convey vector number. Note that
|
|
|
|
* this consumes 4MB of kernel-mapped memory
|
|
|
|
* (Kseg2/Kseg3) for 32-bit kernel.
|
|
|
|
*/
|
|
|
|
ldt_eoi_space = (unsigned long)
|
|
|
|
ioremap(A_PHYS_LDT_SPECIAL_MATCH_BYTES,
|
|
|
|
4 * 1024 * 1024);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
register_pci_controller(&sb1250_controller);
|
|
|
|
|
|
|
|
#ifdef CONFIG_VGA_CONSOLE
|
2013-05-21 12:15:12 +07:00
|
|
|
console_lock();
|
|
|
|
do_take_over_console(&vga_con, 0, MAX_NR_CONSOLES - 1, 1);
|
|
|
|
console_unlock();
|
2005-04-17 05:20:36 +07:00
|
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
arch_initcall(sb1250_pcibios_init);
|