linux_dsm_epyc7002/fs/nfs/file.c

910 lines
24 KiB
C
Raw Normal View History

/*
* linux/fs/nfs/file.c
*
* Copyright (C) 1992 Rick Sladkey
*
* Changes Copyright (C) 1994 by Florian La Roche
* - Do not copy data too often around in the kernel.
* - In nfs_file_read the return value of kmalloc wasn't checked.
* - Put in a better version of read look-ahead buffering. Original idea
* and implementation by Wai S Kok elekokws@ee.nus.sg.
*
* Expire cache on write to a file by Wai S Kok (Oct 1994).
*
* Total rewrite of read side for new NFS buffer cache.. Linus.
*
* nfs regular file handling functions
*/
#include <linux/module.h>
#include <linux/time.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/fcntl.h>
#include <linux/stat.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_mount.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/aio.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/gfp.h>
#include <linux/swap.h>
#include <asm/uaccess.h>
#include "delegation.h"
#include "internal.h"
#include "iostat.h"
#include "fscache.h"
#define NFSDBG_FACILITY NFSDBG_FILE
static const struct vm_operations_struct nfs_file_vm_ops;
/* Hack for future NFS swap support */
#ifndef IS_SWAPFILE
# define IS_SWAPFILE(inode) (0)
#endif
int nfs_check_flags(int flags)
{
if ((flags & (O_APPEND | O_DIRECT)) == (O_APPEND | O_DIRECT))
return -EINVAL;
return 0;
}
EXPORT_SYMBOL_GPL(nfs_check_flags);
/*
* Open file
*/
static int
nfs_file_open(struct inode *inode, struct file *filp)
{
int res;
dprintk("NFS: open file(%s/%s)\n",
filp->f_path.dentry->d_parent->d_name.name,
filp->f_path.dentry->d_name.name);
nfs_inc_stats(inode, NFSIOS_VFSOPEN);
res = nfs_check_flags(filp->f_flags);
if (res)
return res;
res = nfs_open(inode, filp);
return res;
}
int
nfs_file_release(struct inode *inode, struct file *filp)
{
dprintk("NFS: release(%s/%s)\n",
filp->f_path.dentry->d_parent->d_name.name,
filp->f_path.dentry->d_name.name);
nfs_inc_stats(inode, NFSIOS_VFSRELEASE);
return nfs_release(inode, filp);
}
EXPORT_SYMBOL_GPL(nfs_file_release);
/**
* nfs_revalidate_size - Revalidate the file size
* @inode - pointer to inode struct
* @file - pointer to struct file
*
* Revalidates the file length. This is basically a wrapper around
* nfs_revalidate_inode() that takes into account the fact that we may
* have cached writes (in which case we don't care about the server's
* idea of what the file length is), or O_DIRECT (in which case we
* shouldn't trust the cache).
*/
static int nfs_revalidate_file_size(struct inode *inode, struct file *filp)
{
struct nfs_server *server = NFS_SERVER(inode);
struct nfs_inode *nfsi = NFS_I(inode);
if (nfs_have_delegated_attributes(inode))
goto out_noreval;
if (filp->f_flags & O_DIRECT)
goto force_reval;
if (nfsi->cache_validity & NFS_INO_REVAL_PAGECACHE)
goto force_reval;
if (nfs_attribute_timeout(inode))
goto force_reval;
out_noreval:
return 0;
force_reval:
return __nfs_revalidate_inode(server, inode);
}
loff_t nfs_file_llseek(struct file *filp, loff_t offset, int origin)
{
dprintk("NFS: llseek file(%s/%s, %lld, %d)\n",
filp->f_path.dentry->d_parent->d_name.name,
filp->f_path.dentry->d_name.name,
offset, origin);
/*
* origin == SEEK_END || SEEK_DATA || SEEK_HOLE => we must revalidate
* the cached file length
*/
if (origin != SEEK_SET && origin != SEEK_CUR) {
struct inode *inode = filp->f_mapping->host;
int retval = nfs_revalidate_file_size(inode, filp);
if (retval < 0)
return (loff_t)retval;
}
return generic_file_llseek(filp, offset, origin);
}
EXPORT_SYMBOL_GPL(nfs_file_llseek);
/*
* Flush all dirty pages, and check for write errors.
*/
int
nfs_file_flush(struct file *file, fl_owner_t id)
{
struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
dprintk("NFS: flush(%s/%s)\n",
dentry->d_parent->d_name.name,
dentry->d_name.name);
nfs_inc_stats(inode, NFSIOS_VFSFLUSH);
if ((file->f_mode & FMODE_WRITE) == 0)
return 0;
/*
* If we're holding a write delegation, then just start the i/o
* but don't wait for completion (or send a commit).
*/
if (NFS_PROTO(inode)->have_delegation(inode, FMODE_WRITE))
return filemap_fdatawrite(file->f_mapping);
/* Flush writes to the server and return any errors */
return vfs_fsync(file, 0);
}
EXPORT_SYMBOL_GPL(nfs_file_flush);
ssize_t
nfs_file_read(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
struct dentry * dentry = iocb->ki_filp->f_path.dentry;
struct inode * inode = dentry->d_inode;
ssize_t result;
if (iocb->ki_filp->f_flags & O_DIRECT)
return nfs_file_direct_read(iocb, iov, nr_segs, pos, true);
dprintk("NFS: read(%s/%s, %lu@%lu)\n",
dentry->d_parent->d_name.name, dentry->d_name.name,
(unsigned long) iov_length(iov, nr_segs), (unsigned long) pos);
result = nfs_revalidate_mapping(inode, iocb->ki_filp->f_mapping);
if (!result) {
result = generic_file_aio_read(iocb, iov, nr_segs, pos);
if (result > 0)
nfs_add_stats(inode, NFSIOS_NORMALREADBYTES, result);
}
return result;
}
EXPORT_SYMBOL_GPL(nfs_file_read);
ssize_t
nfs_file_splice_read(struct file *filp, loff_t *ppos,
struct pipe_inode_info *pipe, size_t count,
unsigned int flags)
{
struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
ssize_t res;
dprintk("NFS: splice_read(%s/%s, %lu@%Lu)\n",
dentry->d_parent->d_name.name, dentry->d_name.name,
(unsigned long) count, (unsigned long long) *ppos);
res = nfs_revalidate_mapping(inode, filp->f_mapping);
if (!res) {
res = generic_file_splice_read(filp, ppos, pipe, count, flags);
if (res > 0)
nfs_add_stats(inode, NFSIOS_NORMALREADBYTES, res);
}
return res;
}
EXPORT_SYMBOL_GPL(nfs_file_splice_read);
int
nfs_file_mmap(struct file * file, struct vm_area_struct * vma)
{
struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
int status;
dprintk("NFS: mmap(%s/%s)\n",
dentry->d_parent->d_name.name, dentry->d_name.name);
/* Note: generic_file_mmap() returns ENOSYS on nommu systems
* so we call that before revalidating the mapping
*/
status = generic_file_mmap(file, vma);
if (!status) {
vma->vm_ops = &nfs_file_vm_ops;
status = nfs_revalidate_mapping(inode, file->f_mapping);
}
return status;
}
EXPORT_SYMBOL_GPL(nfs_file_mmap);
/*
* Flush any dirty pages for this process, and check for write errors.
* The return status from this call provides a reliable indication of
* whether any write errors occurred for this process.
*
* Notice that it clears the NFS_CONTEXT_ERROR_WRITE before synching to
* disk, but it retrieves and clears ctx->error after synching, despite
* the two being set at the same time in nfs_context_set_write_error().
* This is because the former is used to notify the _next_ call to
* nfs_file_write() that a write error occurred, and hence cause it to
* fall back to doing a synchronous write.
*/
int
nfs_file_fsync_commit(struct file *file, loff_t start, loff_t end, int datasync)
{
struct dentry *dentry = file->f_path.dentry;
struct nfs_open_context *ctx = nfs_file_open_context(file);
struct inode *inode = dentry->d_inode;
int have_error, status;
int ret = 0;
dprintk("NFS: fsync file(%s/%s) datasync %d\n",
dentry->d_parent->d_name.name, dentry->d_name.name,
datasync);
nfs_inc_stats(inode, NFSIOS_VFSFSYNC);
have_error = test_and_clear_bit(NFS_CONTEXT_ERROR_WRITE, &ctx->flags);
status = nfs_commit_inode(inode, FLUSH_SYNC);
if (status >= 0 && ret < 0)
status = ret;
have_error |= test_bit(NFS_CONTEXT_ERROR_WRITE, &ctx->flags);
if (have_error)
ret = xchg(&ctx->error, 0);
if (!ret && status < 0)
ret = status;
return ret;
}
EXPORT_SYMBOL_GPL(nfs_file_fsync_commit);
static int
nfs_file_fsync(struct file *file, loff_t start, loff_t end, int datasync)
{
int ret;
struct inode *inode = file->f_path.dentry->d_inode;
ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
mutex_lock(&inode->i_mutex);
ret = nfs_file_fsync_commit(file, start, end, datasync);
mutex_unlock(&inode->i_mutex);
return ret;
}
NFS: read-modify-write page updating Hi. I have a proposal for possibly resolving this issue. I believe that this situation occurs due to the way that the Linux NFS client handles writes which modify partial pages. The Linux NFS client handles partial page modifications by allocating a page from the page cache, copying the data from the user level into the page, and then keeping track of the offset and length of the modified portions of the page. The page is not marked as up to date because there are portions of the page which do not contain valid file contents. When a read call comes in for a portion of the page, the contents of the page must be read in the from the server. However, since the page may already contain some modified data, that modified data must be written to the server before the file contents can be read back in the from server. And, since the writing and reading can not be done atomically, the data must be written and committed to stable storage on the server for safety purposes. This means either a FILE_SYNC WRITE or a UNSTABLE WRITE followed by a COMMIT. This has been discussed at length previously. This algorithm could be described as modify-write-read. It is most efficient when the application only updates pages and does not read them. My proposed solution is to add a heuristic to decide whether to do this modify-write-read algorithm or switch to a read- modify-write algorithm when initially allocating the page in the write system call path. The heuristic uses the modes that the file was opened with, the offset in the page to read from, and the size of the region to read. If the file was opened for reading in addition to writing and the page would not be filled completely with data from the user level, then read in the old contents of the page and mark it as Uptodate before copying in the new data. If the page would be completely filled with data from the user level, then there would be no reason to read in the old contents because they would just be copied over. This would optimize for applications which randomly access and update portions of files. The linkage editor for the C compiler is an example of such a thing. I tested the attached patch by using rpmbuild to build the current Fedora rawhide kernel. The kernel without the patch generated about 269,500 WRITE requests. The modified kernel containing the patch generated about 261,000 WRITE requests. Thus, about 8,500 fewer WRITE requests were generated. I suspect that many of these additional WRITE requests were probably FILE_SYNC requests to WRITE a single page, but I didn't test this theory. The difference between this patch and the previous one was to remove the unneeded PageDirty() test. I then retested to ensure that the resulting system continued to behave as desired. Thanx... ps Signed-off-by: Peter Staubach <staubach@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-10 19:54:16 +07:00
/*
* Decide whether a read/modify/write cycle may be more efficient
* then a modify/write/read cycle when writing to a page in the
* page cache.
*
* The modify/write/read cycle may occur if a page is read before
* being completely filled by the writer. In this situation, the
* page must be completely written to stable storage on the server
* before it can be refilled by reading in the page from the server.
* This can lead to expensive, small, FILE_SYNC mode writes being
* done.
*
* It may be more efficient to read the page first if the file is
* open for reading in addition to writing, the page is not marked
* as Uptodate, it is not dirty or waiting to be committed,
* indicating that it was previously allocated and then modified,
* that there were valid bytes of data in that range of the file,
* and that the new data won't completely replace the old data in
* that range of the file.
*/
static int nfs_want_read_modify_write(struct file *file, struct page *page,
loff_t pos, unsigned len)
{
unsigned int pglen = nfs_page_length(page);
unsigned int offset = pos & (PAGE_CACHE_SIZE - 1);
unsigned int end = offset + len;
if ((file->f_mode & FMODE_READ) && /* open for read? */
!PageUptodate(page) && /* Uptodate? */
!PagePrivate(page) && /* i/o request already? */
pglen && /* valid bytes of file? */
(end < pglen || offset)) /* replace all valid bytes? */
return 1;
return 0;
}
/*
* This does the "real" work of the write. We must allocate and lock the
* page to be sent back to the generic routine, which then copies the
* data from user space.
*
* If the writer ends up delaying the write, the writer needs to
* increment the page use counts until he is done with the page.
*/
static int nfs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
int ret;
NFS: read-modify-write page updating Hi. I have a proposal for possibly resolving this issue. I believe that this situation occurs due to the way that the Linux NFS client handles writes which modify partial pages. The Linux NFS client handles partial page modifications by allocating a page from the page cache, copying the data from the user level into the page, and then keeping track of the offset and length of the modified portions of the page. The page is not marked as up to date because there are portions of the page which do not contain valid file contents. When a read call comes in for a portion of the page, the contents of the page must be read in the from the server. However, since the page may already contain some modified data, that modified data must be written to the server before the file contents can be read back in the from server. And, since the writing and reading can not be done atomically, the data must be written and committed to stable storage on the server for safety purposes. This means either a FILE_SYNC WRITE or a UNSTABLE WRITE followed by a COMMIT. This has been discussed at length previously. This algorithm could be described as modify-write-read. It is most efficient when the application only updates pages and does not read them. My proposed solution is to add a heuristic to decide whether to do this modify-write-read algorithm or switch to a read- modify-write algorithm when initially allocating the page in the write system call path. The heuristic uses the modes that the file was opened with, the offset in the page to read from, and the size of the region to read. If the file was opened for reading in addition to writing and the page would not be filled completely with data from the user level, then read in the old contents of the page and mark it as Uptodate before copying in the new data. If the page would be completely filled with data from the user level, then there would be no reason to read in the old contents because they would just be copied over. This would optimize for applications which randomly access and update portions of files. The linkage editor for the C compiler is an example of such a thing. I tested the attached patch by using rpmbuild to build the current Fedora rawhide kernel. The kernel without the patch generated about 269,500 WRITE requests. The modified kernel containing the patch generated about 261,000 WRITE requests. Thus, about 8,500 fewer WRITE requests were generated. I suspect that many of these additional WRITE requests were probably FILE_SYNC requests to WRITE a single page, but I didn't test this theory. The difference between this patch and the previous one was to remove the unneeded PageDirty() test. I then retested to ensure that the resulting system continued to behave as desired. Thanx... ps Signed-off-by: Peter Staubach <staubach@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-10 19:54:16 +07:00
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
struct page *page;
NFS: read-modify-write page updating Hi. I have a proposal for possibly resolving this issue. I believe that this situation occurs due to the way that the Linux NFS client handles writes which modify partial pages. The Linux NFS client handles partial page modifications by allocating a page from the page cache, copying the data from the user level into the page, and then keeping track of the offset and length of the modified portions of the page. The page is not marked as up to date because there are portions of the page which do not contain valid file contents. When a read call comes in for a portion of the page, the contents of the page must be read in the from the server. However, since the page may already contain some modified data, that modified data must be written to the server before the file contents can be read back in the from server. And, since the writing and reading can not be done atomically, the data must be written and committed to stable storage on the server for safety purposes. This means either a FILE_SYNC WRITE or a UNSTABLE WRITE followed by a COMMIT. This has been discussed at length previously. This algorithm could be described as modify-write-read. It is most efficient when the application only updates pages and does not read them. My proposed solution is to add a heuristic to decide whether to do this modify-write-read algorithm or switch to a read- modify-write algorithm when initially allocating the page in the write system call path. The heuristic uses the modes that the file was opened with, the offset in the page to read from, and the size of the region to read. If the file was opened for reading in addition to writing and the page would not be filled completely with data from the user level, then read in the old contents of the page and mark it as Uptodate before copying in the new data. If the page would be completely filled with data from the user level, then there would be no reason to read in the old contents because they would just be copied over. This would optimize for applications which randomly access and update portions of files. The linkage editor for the C compiler is an example of such a thing. I tested the attached patch by using rpmbuild to build the current Fedora rawhide kernel. The kernel without the patch generated about 269,500 WRITE requests. The modified kernel containing the patch generated about 261,000 WRITE requests. Thus, about 8,500 fewer WRITE requests were generated. I suspect that many of these additional WRITE requests were probably FILE_SYNC requests to WRITE a single page, but I didn't test this theory. The difference between this patch and the previous one was to remove the unneeded PageDirty() test. I then retested to ensure that the resulting system continued to behave as desired. Thanx... ps Signed-off-by: Peter Staubach <staubach@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-10 19:54:16 +07:00
int once_thru = 0;
dfprintk(PAGECACHE, "NFS: write_begin(%s/%s(%ld), %u@%lld)\n",
file->f_path.dentry->d_parent->d_name.name,
file->f_path.dentry->d_name.name,
mapping->host->i_ino, len, (long long) pos);
NFS: read-modify-write page updating Hi. I have a proposal for possibly resolving this issue. I believe that this situation occurs due to the way that the Linux NFS client handles writes which modify partial pages. The Linux NFS client handles partial page modifications by allocating a page from the page cache, copying the data from the user level into the page, and then keeping track of the offset and length of the modified portions of the page. The page is not marked as up to date because there are portions of the page which do not contain valid file contents. When a read call comes in for a portion of the page, the contents of the page must be read in the from the server. However, since the page may already contain some modified data, that modified data must be written to the server before the file contents can be read back in the from server. And, since the writing and reading can not be done atomically, the data must be written and committed to stable storage on the server for safety purposes. This means either a FILE_SYNC WRITE or a UNSTABLE WRITE followed by a COMMIT. This has been discussed at length previously. This algorithm could be described as modify-write-read. It is most efficient when the application only updates pages and does not read them. My proposed solution is to add a heuristic to decide whether to do this modify-write-read algorithm or switch to a read- modify-write algorithm when initially allocating the page in the write system call path. The heuristic uses the modes that the file was opened with, the offset in the page to read from, and the size of the region to read. If the file was opened for reading in addition to writing and the page would not be filled completely with data from the user level, then read in the old contents of the page and mark it as Uptodate before copying in the new data. If the page would be completely filled with data from the user level, then there would be no reason to read in the old contents because they would just be copied over. This would optimize for applications which randomly access and update portions of files. The linkage editor for the C compiler is an example of such a thing. I tested the attached patch by using rpmbuild to build the current Fedora rawhide kernel. The kernel without the patch generated about 269,500 WRITE requests. The modified kernel containing the patch generated about 261,000 WRITE requests. Thus, about 8,500 fewer WRITE requests were generated. I suspect that many of these additional WRITE requests were probably FILE_SYNC requests to WRITE a single page, but I didn't test this theory. The difference between this patch and the previous one was to remove the unneeded PageDirty() test. I then retested to ensure that the resulting system continued to behave as desired. Thanx... ps Signed-off-by: Peter Staubach <staubach@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-10 19:54:16 +07:00
start:
2009-03-12 01:10:30 +07:00
/*
* Prevent starvation issues if someone is doing a consistency
* sync-to-disk
*/
ret = wait_on_bit(&NFS_I(mapping->host)->flags, NFS_INO_FLUSHING,
nfs_wait_bit_killable, TASK_KILLABLE);
if (ret)
return ret;
fs: symlink write_begin allocation context fix With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: Nick Piggin <npiggin@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-05 03:00:53 +07:00
page = grab_cache_page_write_begin(mapping, index, flags);
if (!page)
return -ENOMEM;
*pagep = page;
ret = nfs_flush_incompatible(file, page);
if (ret) {
unlock_page(page);
page_cache_release(page);
NFS: read-modify-write page updating Hi. I have a proposal for possibly resolving this issue. I believe that this situation occurs due to the way that the Linux NFS client handles writes which modify partial pages. The Linux NFS client handles partial page modifications by allocating a page from the page cache, copying the data from the user level into the page, and then keeping track of the offset and length of the modified portions of the page. The page is not marked as up to date because there are portions of the page which do not contain valid file contents. When a read call comes in for a portion of the page, the contents of the page must be read in the from the server. However, since the page may already contain some modified data, that modified data must be written to the server before the file contents can be read back in the from server. And, since the writing and reading can not be done atomically, the data must be written and committed to stable storage on the server for safety purposes. This means either a FILE_SYNC WRITE or a UNSTABLE WRITE followed by a COMMIT. This has been discussed at length previously. This algorithm could be described as modify-write-read. It is most efficient when the application only updates pages and does not read them. My proposed solution is to add a heuristic to decide whether to do this modify-write-read algorithm or switch to a read- modify-write algorithm when initially allocating the page in the write system call path. The heuristic uses the modes that the file was opened with, the offset in the page to read from, and the size of the region to read. If the file was opened for reading in addition to writing and the page would not be filled completely with data from the user level, then read in the old contents of the page and mark it as Uptodate before copying in the new data. If the page would be completely filled with data from the user level, then there would be no reason to read in the old contents because they would just be copied over. This would optimize for applications which randomly access and update portions of files. The linkage editor for the C compiler is an example of such a thing. I tested the attached patch by using rpmbuild to build the current Fedora rawhide kernel. The kernel without the patch generated about 269,500 WRITE requests. The modified kernel containing the patch generated about 261,000 WRITE requests. Thus, about 8,500 fewer WRITE requests were generated. I suspect that many of these additional WRITE requests were probably FILE_SYNC requests to WRITE a single page, but I didn't test this theory. The difference between this patch and the previous one was to remove the unneeded PageDirty() test. I then retested to ensure that the resulting system continued to behave as desired. Thanx... ps Signed-off-by: Peter Staubach <staubach@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-10 19:54:16 +07:00
} else if (!once_thru &&
nfs_want_read_modify_write(file, page, pos, len)) {
once_thru = 1;
ret = nfs_readpage(file, page);
page_cache_release(page);
if (!ret)
goto start;
}
return ret;
}
static int nfs_write_end(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
unsigned offset = pos & (PAGE_CACHE_SIZE - 1);
int status;
dfprintk(PAGECACHE, "NFS: write_end(%s/%s(%ld), %u@%lld)\n",
file->f_path.dentry->d_parent->d_name.name,
file->f_path.dentry->d_name.name,
mapping->host->i_ino, len, (long long) pos);
/*
* Zero any uninitialised parts of the page, and then mark the page
* as up to date if it turns out that we're extending the file.
*/
if (!PageUptodate(page)) {
unsigned pglen = nfs_page_length(page);
unsigned end = offset + len;
if (pglen == 0) {
zero_user_segments(page, 0, offset,
end, PAGE_CACHE_SIZE);
SetPageUptodate(page);
} else if (end >= pglen) {
zero_user_segment(page, end, PAGE_CACHE_SIZE);
if (offset == 0)
SetPageUptodate(page);
} else
zero_user_segment(page, pglen, PAGE_CACHE_SIZE);
}
status = nfs_updatepage(file, page, offset, copied);
unlock_page(page);
page_cache_release(page);
if (status < 0)
return status;
NFS_I(mapping->host)->write_io += copied;
return copied;
}
/*
* Partially or wholly invalidate a page
* - Release the private state associated with a page if undergoing complete
* page invalidation
* - Called if either PG_private or PG_fscache is set on the page
* - Caller holds page lock
*/
static void nfs_invalidate_page(struct page *page, unsigned long offset)
{
dfprintk(PAGECACHE, "NFS: invalidate_page(%p, %lu)\n", page, offset);
if (offset != 0)
return;
/* Cancel any unstarted writes on this page */
nfs_wb_page_cancel(page_file_mapping(page)->host, page);
nfs_fscache_invalidate_page(page, page->mapping->host);
}
/*
* Attempt to release the private state associated with a page
* - Called if either PG_private or PG_fscache is set on the page
* - Caller holds page lock
* - Return true (may release page) or false (may not)
*/
static int nfs_release_page(struct page *page, gfp_t gfp)
{
struct address_space *mapping = page->mapping;
dfprintk(PAGECACHE, "NFS: release_page(%p)\n", page);
nfs: skip commit in releasepage if we're freeing memory for fs-related reasons We've had some reports of a deadlock where rpciod ends up with a stack trace like this: PID: 2507 TASK: ffff88103691ab40 CPU: 14 COMMAND: "rpciod/14" #0 [ffff8810343bf2f0] schedule at ffffffff814dabd9 #1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs] #2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f #3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8 #4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs] #5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs] #6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670 #7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271 #8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638 #9 [ffff8810343bf818] shrink_zone at ffffffff8112788f #10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e #11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f #12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad #13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942 #14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a #15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9 #16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b #17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808 #18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c #19 [ffff8810343bfce8] inet_create at ffffffff81483ba6 #20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7 #21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc] #22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc] #23 [ffff8810343bfe38] worker_thread at ffffffff810887d0 #24 [ffff8810343bfee8] kthread at ffffffff8108dd96 #25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca rpciod is trying to allocate memory for a new socket to talk to the server. The VM ends up calling ->releasepage to get more memory, and it tries to do a blocking commit. That commit can't succeed however without a connected socket, so we deadlock. Fix this by setting PF_FSTRANS on the workqueue task prior to doing the socket allocation, and having nfs_release_page check for that flag when deciding whether to do a commit call. Also, set PF_FSTRANS unconditionally in rpc_async_schedule since that function can also do allocations sometimes. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
2012-07-24 00:58:51 +07:00
/* Only do I/O if gfp is a superset of GFP_KERNEL, and we're not
* doing this memory reclaim for a fs-related allocation.
*/
if (mapping && (gfp & GFP_KERNEL) == GFP_KERNEL &&
!(current->flags & PF_FSTRANS)) {
int how = FLUSH_SYNC;
/* Don't let kswapd deadlock waiting for OOM RPC calls */
if (current_is_kswapd())
how = 0;
nfs_commit_inode(mapping->host, how);
}
/* If PagePrivate() is set, then the page is not freeable */
if (PagePrivate(page))
return 0;
return nfs_fscache_release_page(page, gfp);
}
/*
* Attempt to clear the private state associated with a page when an error
* occurs that requires the cached contents of an inode to be written back or
* destroyed
* - Called if either PG_private or fscache is set on the page
* - Caller holds page lock
* - Return 0 if successful, -error otherwise
*/
static int nfs_launder_page(struct page *page)
{
struct inode *inode = page_file_mapping(page)->host;
struct nfs_inode *nfsi = NFS_I(inode);
dfprintk(PAGECACHE, "NFS: launder_page(%ld, %llu)\n",
inode->i_ino, (long long)page_offset(page));
nfs_fscache_wait_on_page_write(nfsi, page);
return nfs_wb_page(inode, page);
}
#ifdef CONFIG_NFS_SWAP
static int nfs_swap_activate(struct swap_info_struct *sis, struct file *file,
sector_t *span)
{
*span = sis->pages;
return xs_swapper(NFS_CLIENT(file->f_mapping->host)->cl_xprt, 1);
}
static void nfs_swap_deactivate(struct file *file)
{
xs_swapper(NFS_CLIENT(file->f_mapping->host)->cl_xprt, 0);
}
#endif
const struct address_space_operations nfs_file_aops = {
.readpage = nfs_readpage,
.readpages = nfs_readpages,
.set_page_dirty = __set_page_dirty_nobuffers,
.writepage = nfs_writepage,
.writepages = nfs_writepages,
.write_begin = nfs_write_begin,
.write_end = nfs_write_end,
.invalidatepage = nfs_invalidate_page,
.releasepage = nfs_release_page,
.direct_IO = nfs_direct_IO,
.migratepage = nfs_migrate_page,
.launder_page = nfs_launder_page,
.error_remove_page = generic_error_remove_page,
#ifdef CONFIG_NFS_SWAP
.swap_activate = nfs_swap_activate,
.swap_deactivate = nfs_swap_deactivate,
#endif
};
/*
* Notification that a PTE pointing to an NFS page is about to be made
* writable, implying that someone is about to modify the page through a
* shared-writable mapping
*/
static int nfs_vm_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
{
struct page *page = vmf->page;
struct file *filp = vma->vm_file;
struct dentry *dentry = filp->f_path.dentry;
unsigned pagelen;
int ret = VM_FAULT_NOPAGE;
struct address_space *mapping;
dfprintk(PAGECACHE, "NFS: vm_page_mkwrite(%s/%s(%ld), offset %lld)\n",
dentry->d_parent->d_name.name, dentry->d_name.name,
filp->f_mapping->host->i_ino,
(long long)page_offset(page));
/* make sure the cache has finished storing the page */
nfs_fscache_wait_on_page_write(NFS_I(dentry->d_inode), page);
lock_page(page);
mapping = page_file_mapping(page);
if (mapping != dentry->d_inode->i_mapping)
goto out_unlock;
wait_on_page_writeback(page);
pagelen = nfs_page_length(page);
if (pagelen == 0)
goto out_unlock;
ret = VM_FAULT_LOCKED;
if (nfs_flush_incompatible(filp, page) == 0 &&
nfs_updatepage(filp, page, 0, pagelen) == 0)
goto out;
ret = VM_FAULT_SIGBUS;
out_unlock:
unlock_page(page);
out:
return ret;
}
static const struct vm_operations_struct nfs_file_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = nfs_vm_page_mkwrite,
};
static int nfs_need_sync_write(struct file *filp, struct inode *inode)
{
struct nfs_open_context *ctx;
vfs: Implement proper O_SYNC semantics While Linux provided an O_SYNC flag basically since day 1, it took until Linux 2.4.0-test12pre2 to actually get it implemented for filesystems, since that day we had generic_osync_around with only minor changes and the great "For now, when the user asks for O_SYNC, we'll actually give O_DSYNC" comment. This patch intends to actually give us real O_SYNC semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC patches which are required before this patch it's actually surprisingly simple, we just need to figure out when to set the datasync flag to vfs_fsync_range and when not. This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's numerical value to keep binary compatibility, and adds a new real O_SYNC flag. To guarantee backwards compatiblity it is defined as expanding to both the O_DSYNC and the new additional binary flag (__O_SYNC) to make sure we are backwards-compatible when compiled against the new headers. This also means that all places that don't care about the differences can just check O_DSYNC and get the right behaviour for O_SYNC, too - only places that actuall care need to check __O_SYNC in addition. Drivers and network filesystems have been updated in a fail safe way to always do the full sync magic if O_DSYNC is set. The few places setting O_SYNC for lower layers are kept that way for now to stay failsafe. We enforce that O_DSYNC is set when __O_SYNC is set early in the open path to make sure we always get these sane options. Note that parisc really screwed up their headers as they already define a O_DSYNC that has always been a no-op. We try to repair it by using it for the new O_DSYNC and redefinining O_SYNC to send both the traditional O_SYNC numerical value _and_ the O_DSYNC one. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2009-10-27 17:05:28 +07:00
if (IS_SYNC(inode) || (filp->f_flags & O_DSYNC))
return 1;
ctx = nfs_file_open_context(filp);
if (test_bit(NFS_CONTEXT_ERROR_WRITE, &ctx->flags))
return 1;
return 0;
}
ssize_t nfs_file_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
struct dentry * dentry = iocb->ki_filp->f_path.dentry;
struct inode * inode = dentry->d_inode;
unsigned long written = 0;
ssize_t result;
size_t count = iov_length(iov, nr_segs);
if (iocb->ki_filp->f_flags & O_DIRECT)
return nfs_file_direct_write(iocb, iov, nr_segs, pos, true);
dprintk("NFS: write(%s/%s, %lu@%Ld)\n",
dentry->d_parent->d_name.name, dentry->d_name.name,
(unsigned long) count, (long long) pos);
result = -EBUSY;
if (IS_SWAPFILE(inode))
goto out_swapfile;
/*
* O_APPEND implies that we must revalidate the file length.
*/
if (iocb->ki_filp->f_flags & O_APPEND) {
result = nfs_revalidate_file_size(inode, iocb->ki_filp);
if (result)
goto out;
}
result = count;
if (!count)
goto out;
result = generic_file_aio_write(iocb, iov, nr_segs, pos);
if (result > 0)
written = result;
vfs: Implement proper O_SYNC semantics While Linux provided an O_SYNC flag basically since day 1, it took until Linux 2.4.0-test12pre2 to actually get it implemented for filesystems, since that day we had generic_osync_around with only minor changes and the great "For now, when the user asks for O_SYNC, we'll actually give O_DSYNC" comment. This patch intends to actually give us real O_SYNC semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC patches which are required before this patch it's actually surprisingly simple, we just need to figure out when to set the datasync flag to vfs_fsync_range and when not. This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's numerical value to keep binary compatibility, and adds a new real O_SYNC flag. To guarantee backwards compatiblity it is defined as expanding to both the O_DSYNC and the new additional binary flag (__O_SYNC) to make sure we are backwards-compatible when compiled against the new headers. This also means that all places that don't care about the differences can just check O_DSYNC and get the right behaviour for O_SYNC, too - only places that actuall care need to check __O_SYNC in addition. Drivers and network filesystems have been updated in a fail safe way to always do the full sync magic if O_DSYNC is set. The few places setting O_SYNC for lower layers are kept that way for now to stay failsafe. We enforce that O_DSYNC is set when __O_SYNC is set early in the open path to make sure we always get these sane options. Note that parisc really screwed up their headers as they already define a O_DSYNC that has always been a no-op. We try to repair it by using it for the new O_DSYNC and redefinining O_SYNC to send both the traditional O_SYNC numerical value _and_ the O_DSYNC one. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2009-10-27 17:05:28 +07:00
/* Return error values for O_DSYNC and IS_SYNC() */
if (result >= 0 && nfs_need_sync_write(iocb->ki_filp, inode)) {
int err = vfs_fsync(iocb->ki_filp, 0);
if (err < 0)
result = err;
}
if (result > 0)
nfs_add_stats(inode, NFSIOS_NORMALWRITTENBYTES, written);
out:
return result;
out_swapfile:
printk(KERN_INFO "NFS: attempt to write to active swap file!\n");
goto out;
}
EXPORT_SYMBOL_GPL(nfs_file_write);
ssize_t nfs_file_splice_write(struct pipe_inode_info *pipe,
struct file *filp, loff_t *ppos,
size_t count, unsigned int flags)
{
struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
unsigned long written = 0;
ssize_t ret;
dprintk("NFS splice_write(%s/%s, %lu@%llu)\n",
dentry->d_parent->d_name.name, dentry->d_name.name,
(unsigned long) count, (unsigned long long) *ppos);
/*
* The combination of splice and an O_APPEND destination is disallowed.
*/
ret = generic_file_splice_write(pipe, filp, ppos, count, flags);
if (ret > 0)
written = ret;
if (ret >= 0 && nfs_need_sync_write(filp, inode)) {
int err = vfs_fsync(filp, 0);
if (err < 0)
ret = err;
}
if (ret > 0)
nfs_add_stats(inode, NFSIOS_NORMALWRITTENBYTES, written);
return ret;
}
EXPORT_SYMBOL_GPL(nfs_file_splice_write);
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
static int
do_getlk(struct file *filp, int cmd, struct file_lock *fl, int is_local)
{
struct inode *inode = filp->f_mapping->host;
int status = 0;
unsigned int saved_type = fl->fl_type;
/* Try local locking first */
posix_test_lock(filp, fl);
if (fl->fl_type != F_UNLCK) {
/* found a conflict */
goto out;
}
fl->fl_type = saved_type;
if (NFS_PROTO(inode)->have_delegation(inode, FMODE_READ))
goto out_noconflict;
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
if (is_local)
goto out_noconflict;
status = NFS_PROTO(inode)->lock(filp, cmd, fl);
out:
return status;
out_noconflict:
fl->fl_type = F_UNLCK;
goto out;
}
static int do_vfs_lock(struct file *file, struct file_lock *fl)
{
int res = 0;
switch (fl->fl_flags & (FL_POSIX|FL_FLOCK)) {
case FL_POSIX:
res = posix_lock_file_wait(file, fl);
break;
case FL_FLOCK:
res = flock_lock_file_wait(file, fl);
break;
default:
BUG();
}
return res;
}
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
static int
do_unlk(struct file *filp, int cmd, struct file_lock *fl, int is_local)
{
struct inode *inode = filp->f_mapping->host;
int status;
/*
* Flush all pending writes before doing anything
* with locks..
*/
nfs_sync_mapping(filp->f_mapping);
/* NOTE: special case
* If we're signalled while cleaning up locks on process exit, we
* still need to complete the unlock.
*/
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
/*
* Use local locking if mounted with "-onolock" or with appropriate
* "-olocal_lock="
*/
if (!is_local)
status = NFS_PROTO(inode)->lock(filp, cmd, fl);
else
status = do_vfs_lock(filp, fl);
return status;
}
static int
is_time_granular(struct timespec *ts) {
return ((ts->tv_sec == 0) && (ts->tv_nsec <= 1000));
}
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
static int
do_setlk(struct file *filp, int cmd, struct file_lock *fl, int is_local)
{
struct inode *inode = filp->f_mapping->host;
int status;
/*
* Flush all pending writes before doing anything
* with locks..
*/
status = nfs_sync_mapping(filp->f_mapping);
if (status != 0)
goto out;
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
/*
* Use local locking if mounted with "-onolock" or with appropriate
* "-olocal_lock="
*/
if (!is_local)
status = NFS_PROTO(inode)->lock(filp, cmd, fl);
else
status = do_vfs_lock(filp, fl);
if (status < 0)
goto out;
/*
* Revalidate the cache if the server has time stamps granular
* enough to detect subsecond changes. Otherwise, clear the
* cache to prevent missing any changes.
*
* This makes locking act as a cache coherency point.
*/
nfs_sync_mapping(filp->f_mapping);
if (!NFS_PROTO(inode)->have_delegation(inode, FMODE_READ)) {
if (is_time_granular(&NFS_SERVER(inode)->time_delta))
__nfs_revalidate_inode(NFS_SERVER(inode), inode);
else
nfs_zap_caches(inode);
}
out:
return status;
}
/*
* Lock a (portion of) a file
*/
int nfs_lock(struct file *filp, int cmd, struct file_lock *fl)
{
struct inode *inode = filp->f_mapping->host;
int ret = -ENOLCK;
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
int is_local = 0;
dprintk("NFS: lock(%s/%s, t=%x, fl=%x, r=%lld:%lld)\n",
filp->f_path.dentry->d_parent->d_name.name,
filp->f_path.dentry->d_name.name,
fl->fl_type, fl->fl_flags,
(long long)fl->fl_start, (long long)fl->fl_end);
nfs_inc_stats(inode, NFSIOS_VFSLOCK);
/* No mandatory locks over NFS */
if (__mandatory_lock(inode) && fl->fl_type != F_UNLCK)
goto out_err;
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
if (NFS_SERVER(inode)->flags & NFS_MOUNT_LOCAL_FCNTL)
is_local = 1;
if (NFS_PROTO(inode)->lock_check_bounds != NULL) {
ret = NFS_PROTO(inode)->lock_check_bounds(fl);
if (ret < 0)
goto out_err;
}
if (IS_GETLK(cmd))
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
ret = do_getlk(filp, cmd, fl, is_local);
else if (fl->fl_type == F_UNLCK)
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
ret = do_unlk(filp, cmd, fl, is_local);
else
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
ret = do_setlk(filp, cmd, fl, is_local);
out_err:
return ret;
}
EXPORT_SYMBOL_GPL(nfs_lock);
/*
* Lock a (portion of) a file
*/
int nfs_flock(struct file *filp, int cmd, struct file_lock *fl)
{
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
struct inode *inode = filp->f_mapping->host;
int is_local = 0;
dprintk("NFS: flock(%s/%s, t=%x, fl=%x)\n",
filp->f_path.dentry->d_parent->d_name.name,
filp->f_path.dentry->d_name.name,
fl->fl_type, fl->fl_flags);
if (!(fl->fl_flags & FL_FLOCK))
return -ENOLCK;
/*
* The NFSv4 protocol doesn't support LOCK_MAND, which is not part of
* any standard. In principle we might be able to support LOCK_MAND
* on NFSv2/3 since NLMv3/4 support DOS share modes, but for now the
* NFS code is not set up for it.
*/
if (fl->fl_type & LOCK_MAND)
return -EINVAL;
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
if (NFS_SERVER(inode)->flags & NFS_MOUNT_LOCAL_FLOCK)
is_local = 1;
/* We're simulating flock() locks using posix locks on the server */
fl->fl_owner = (fl_owner_t)filp;
fl->fl_start = 0;
fl->fl_end = OFFSET_MAX;
if (fl->fl_type == F_UNLCK)
nfs: introduce mount option '-olocal_lock' to make locks local NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 19:55:58 +07:00
return do_unlk(filp, cmd, fl, is_local);
return do_setlk(filp, cmd, fl, is_local);
}
EXPORT_SYMBOL_GPL(nfs_flock);
/*
* There is no protocol support for leases, so we have no way to implement
* them correctly in the face of opens by other clients.
*/
int nfs_setlease(struct file *file, long arg, struct file_lock **fl)
{
dprintk("NFS: setlease(%s/%s, arg=%ld)\n",
file->f_path.dentry->d_parent->d_name.name,
file->f_path.dentry->d_name.name, arg);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(nfs_setlease);
const struct file_operations nfs_file_operations = {
.llseek = nfs_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = nfs_file_read,
.aio_write = nfs_file_write,
.mmap = nfs_file_mmap,
.open = nfs_file_open,
.flush = nfs_file_flush,
.release = nfs_file_release,
.fsync = nfs_file_fsync,
.lock = nfs_lock,
.flock = nfs_flock,
.splice_read = nfs_file_splice_read,
.splice_write = nfs_file_splice_write,
.check_flags = nfs_check_flags,
.setlease = nfs_setlease,
};
EXPORT_SYMBOL_GPL(nfs_file_operations);