linux_dsm_epyc7002/arch/arm/mach-cns3xxx/core.c

417 lines
11 KiB
C
Raw Normal View History

/*
* Copyright 1999 - 2003 ARM Limited
* Copyright 2000 Deep Blue Solutions Ltd
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/hardware/cache-l2x0.h>
#include "cns3xxx.h"
#include "core.h"
#include "pm.h"
static struct map_desc cns3xxx_io_desc[] __initdata = {
{
.virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
.length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_MISC_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_MISC_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_PM_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_PM_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
CNS3xxx: Fix PCIe early iotable_init(). This patch fixes the following BUG: > kernel BUG at mm/vmalloc.c:1132! > PC is at vm_area_add_early+0x20/0x84 > LR is at add_static_vm_early+0xc/0x60 > > The problem is cns3xxx_pcie_init() (device_initcall) calls the "early" > iotable_init(). Instead of merely calling the PCIe iotable_init() from machine_desc->map_io(), this patch adds the required mappings to the main CNS3xxx mapping table. This means we don't convert .pfn back to virtual addresses in pcie.c. The size of the address space consumed for PCIe control is reduced from 96 MiB (6 * 16 MiB) to about 32 MiB (this doesn't include MMIO address space required by PCI devices): - Size of the PCIe "host" mapping is reduced from 16 MiB to 4 KiB. It's a PCI configuration address space for the local (on-chip) PCIe bridge. - Size of the "CFG0" mapping is reduced from 16 MiB to 64 KiB. It's for Type 0 Configuration accesses, i.e., accesses to the single device (with possible "functions") on the other end of the PCIe link. We really only need a 4 KiB page at 0x8000 (see the offset calculation in cns3xxx_pci_cfg_base()). There is still a potential problem with PCI bus numbers > 0xF, are they supported? - The code in cns3xxx_pci_cfg_base() and cns3xxx_pcie_hw_init() should be clearer now. - The maximum address space allocated for PCI MMIO is now correctly shown in /proc/iomem as 176 MiB (per each of the two PCI "domains" - previously only 16 MiB were reserved). This patch has been tested on Gateworks Laguna board, masqueraded as CNS3420VB. Signed-off-by: Krzysztof Ha?asa <khalasa@piap.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-04 14:37:10 +07:00
#ifdef CONFIG_PCI
}, {
.virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
.length = SZ_64K, /* really 4 KiB at offset 32 KiB */
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
.length = SZ_16M,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
.length = SZ_64K, /* really 4 KiB at offset 32 KiB */
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
.length = SZ_16M,
.type = MT_DEVICE,
#endif
},
};
void __init cns3xxx_map_io(void)
{
iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
}
/* used by entry-macro.S */
void __init cns3xxx_init_irq(void)
{
gic_init(0, 29, IOMEM(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT),
IOMEM(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT));
}
void cns3xxx_power_off(void)
{
u32 __iomem *pm_base = IOMEM(CNS3XXX_PM_BASE_VIRT);
u32 clkctrl;
printk(KERN_INFO "powering system down...\n");
clkctrl = readl(pm_base + PM_SYS_CLK_CTRL_OFFSET);
clkctrl &= 0xfffff1ff;
clkctrl |= (0x5 << 9); /* Hibernate */
writel(clkctrl, pm_base + PM_SYS_CLK_CTRL_OFFSET);
}
/*
* Timer
*/
static void __iomem *cns3xxx_tmr1;
static int cns3xxx_shutdown(struct clock_event_device *clk)
{
writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
return 0;
}
static int cns3xxx_set_oneshot(struct clock_event_device *clk)
{
unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
/* period set, and timer enabled in 'next_event' hook */
ctrl |= (1 << 2) | (1 << 9);
writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
return 0;
}
static int cns3xxx_set_periodic(struct clock_event_device *clk)
{
unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
int pclk = cns3xxx_cpu_clock() / 8;
int reload;
reload = pclk * 20 / (3 * HZ) * 0x25000;
writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
return 0;
}
static int cns3xxx_timer_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
writel(evt, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
writel(ctrl | (1 << 0), cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
return 0;
}
static struct clock_event_device cns3xxx_tmr1_clockevent = {
.name = "cns3xxx timer1",
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
.set_state_shutdown = cns3xxx_shutdown,
.set_state_periodic = cns3xxx_set_periodic,
.set_state_oneshot = cns3xxx_set_oneshot,
.tick_resume = cns3xxx_shutdown,
.set_next_event = cns3xxx_timer_set_next_event,
.rating = 350,
.cpumask = cpu_all_mask,
};
static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
{
cns3xxx_tmr1_clockevent.irq = timer_irq;
clockevents_config_and_register(&cns3xxx_tmr1_clockevent,
(cns3xxx_cpu_clock() >> 3) * 1000000,
0xf, 0xffffffff);
}
/*
* IRQ handler for the timer
*/
static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &cns3xxx_tmr1_clockevent;
u32 __iomem *stat = cns3xxx_tmr1 + TIMER1_2_INTERRUPT_STATUS_OFFSET;
u32 val;
/* Clear the interrupt */
val = readl(stat);
writel(val & ~(1 << 2), stat);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction cns3xxx_timer_irq = {
.name = "timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = cns3xxx_timer_interrupt,
};
/*
* Set up the clock source and clock events devices
*/
static void __init __cns3xxx_timer_init(unsigned int timer_irq)
{
u32 val;
u32 irq_mask;
/*
* Initialise to a known state (all timers off)
*/
/* disable timer1 and timer2 */
writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
/* stop free running timer3 */
writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
/* timer1 */
writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
/* mask irq, non-mask timer1 overflow */
irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
irq_mask &= ~(1 << 2);
irq_mask |= 0x03;
writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
/* down counter */
val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
val |= (1 << 9);
writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
/* timer2 */
writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
/* mask irq */
irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
/* down counter */
val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
val |= (1 << 10);
writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
/* Make irqs happen for the system timer */
setup_irq(timer_irq, &cns3xxx_timer_irq);
cns3xxx_clockevents_init(timer_irq);
}
void __init cns3xxx_timer_init(void)
{
cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT);
__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
}
#ifdef CONFIG_CACHE_L2X0
void __init cns3xxx_l2x0_init(void)
{
void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
u32 val;
if (WARN_ON(!base))
return;
/*
* Tag RAM Control register
*
* bit[10:8] - 1 cycle of write accesses latency
* bit[6:4] - 1 cycle of read accesses latency
* bit[3:0] - 1 cycle of setup latency
*
* 1 cycle of latency for setup, read and write accesses
*/
val = readl(base + L310_TAG_LATENCY_CTRL);
val &= 0xfffff888;
writel(val, base + L310_TAG_LATENCY_CTRL);
/*
* Data RAM Control register
*
* bit[10:8] - 1 cycles of write accesses latency
* bit[6:4] - 1 cycles of read accesses latency
* bit[3:0] - 1 cycle of setup latency
*
* 1 cycle of latency for setup, read and write accesses
*/
val = readl(base + L310_DATA_LATENCY_CTRL);
val &= 0xfffff888;
writel(val, base + L310_DATA_LATENCY_CTRL);
/* 32 KiB, 8-way, parity disable */
l2x0_init(base, 0x00500000, 0xfe0f0fff);
}
#endif /* CONFIG_CACHE_L2X0 */
static int csn3xxx_usb_power_on(struct platform_device *pdev)
{
/*
* EHCI and OHCI share the same clock and power,
* resetting twice would cause the 1st controller been reset.
* Therefore only do power up at the first up device, and
* power down at the last down device.
*
* Set USB AHB INCR length to 16
*/
if (atomic_inc_return(&usb_pwr_ref) == 1) {
cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
MISC_CHIP_CONFIG_REG);
}
return 0;
}
static void csn3xxx_usb_power_off(struct platform_device *pdev)
{
/*
* EHCI and OHCI share the same clock and power,
* resetting twice would cause the 1st controller been reset.
* Therefore only do power up at the first up device, and
* power down at the last down device.
*/
if (atomic_dec_return(&usb_pwr_ref) == 0)
cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
}
static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
.power_on = csn3xxx_usb_power_on,
.power_off = csn3xxx_usb_power_off,
};
static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
.num_ports = 1,
.power_on = csn3xxx_usb_power_on,
.power_off = csn3xxx_usb_power_off,
};
static const struct of_dev_auxdata const cns3xxx_auxdata[] __initconst = {
{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
{ "cavium,cns3420-sdhci", CNS3XXX_SDIO_BASE, "ahci", NULL },
{},
};
static void __init cns3xxx_init(void)
{
struct device_node *dn;
cns3xxx_l2x0_init();
dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-ahci");
if (of_device_is_available(dn)) {
u32 tmp;
tmp = __raw_readl(MISC_SATA_POWER_MODE);
tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
__raw_writel(tmp, MISC_SATA_POWER_MODE);
/* Enable SATA PHY */
cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
/* Enable SATA Clock */
cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
/* De-Asscer SATA Reset */
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
}
dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
if (of_device_is_available(dn)) {
u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
u32 gpioa_pins = __raw_readl(gpioa);
/* MMC/SD pins share with GPIOA */
gpioa_pins |= 0x1fff0004;
__raw_writel(gpioa_pins, gpioa);
cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
}
pm_power_off = cns3xxx_power_off;
of_platform_populate(NULL, of_default_bus_match_table,
cns3xxx_auxdata, NULL);
}
static const char *const cns3xxx_dt_compat[] __initconst = {
"cavium,cns3410",
"cavium,cns3420",
NULL,
};
DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
.dt_compat = cns3xxx_dt_compat,
.map_io = cns3xxx_map_io,
.init_irq = cns3xxx_init_irq,
.init_time = cns3xxx_timer_init,
.init_machine = cns3xxx_init,
.init_late = cns3xxx_pcie_init_late,
.restart = cns3xxx_restart,
MACHINE_END