linux_dsm_epyc7002/mm/vmscan.c

3892 lines
111 KiB
C
Raw Normal View History

/*
* linux/mm/vmscan.c
*
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
* Swap reorganised 29.12.95, Stephen Tweedie.
* kswapd added: 7.1.96 sct
* Removed kswapd_ctl limits, and swap out as many pages as needed
* to bring the system back to freepages.high: 2.4.97, Rik van Riel.
* Zone aware kswapd started 02/00, Kanoj Sarcar (kanoj@sgi.com).
* Multiqueue VM started 5.8.00, Rik van Riel.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/mm.h>
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/gfp.h>
#include <linux/kernel_stat.h>
#include <linux/swap.h>
#include <linux/pagemap.h>
#include <linux/init.h>
#include <linux/highmem.h>
memcg: add memory.pressure_level events With this patch userland applications that want to maintain the interactivity/memory allocation cost can use the pressure level notifications. The levels are defined like this: The "low" level means that the system is reclaiming memory for new allocations. Monitoring this reclaiming activity might be useful for maintaining cache level. Upon notification, the program (typically "Activity Manager") might analyze vmstat and act in advance (i.e. prematurely shutdown unimportant services). The "medium" level means that the system is experiencing medium memory pressure, the system might be making swap, paging out active file caches, etc. Upon this event applications may decide to further analyze vmstat/zoneinfo/memcg or internal memory usage statistics and free any resources that can be easily reconstructed or re-read from a disk. The "critical" level means that the system is actively thrashing, it is about to out of memory (OOM) or even the in-kernel OOM killer is on its way to trigger. Applications should do whatever they can to help the system. It might be too late to consult with vmstat or any other statistics, so it's advisable to take an immediate action. The events are propagated upward until the event is handled, i.e. the events are not pass-through. Here is what this means: for example you have three cgroups: A->B->C. Now you set up an event listener on cgroups A, B and C, and suppose group C experiences some pressure. In this situation, only group C will receive the notification, i.e. groups A and B will not receive it. This is done to avoid excessive "broadcasting" of messages, which disturbs the system and which is especially bad if we are low on memory or thrashing. So, organize the cgroups wisely, or propagate the events manually (or, ask us to implement the pass-through events, explaining why would you need them.) Performance wise, the memory pressure notifications feature itself is lightweight and does not require much of bookkeeping, in contrast to the rest of memcg features. Unfortunately, as of current memcg implementation, pages accounting is an inseparable part and cannot be turned off. The good news is that there are some efforts[1] to improve the situation; plus, implementing the same, fully API-compatible[2] interface for CONFIG_MEMCG=n case (e.g. embedded) is also a viable option, so it will not require any changes on the userland side. [1] http://permalink.gmane.org/gmane.linux.kernel.cgroups/6291 [2] http://lkml.org/lkml/2013/2/21/454 [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_CGROPUPS=n warnings] Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Glauber Costa <glommer@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Leonid Moiseichuk <leonid.moiseichuk@nokia.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 05:08:31 +07:00
#include <linux/vmpressure.h>
#include <linux/vmstat.h>
#include <linux/file.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/buffer_head.h> /* for try_to_release_page(),
buffer_heads_over_limit */
#include <linux/mm_inline.h>
#include <linux/backing-dev.h>
#include <linux/rmap.h>
#include <linux/topology.h>
#include <linux/cpu.h>
#include <linux/cpuset.h>
#include <linux/compaction.h>
#include <linux/notifier.h>
#include <linux/rwsem.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/memcontrol.h>
per-task-delay-accounting: add memory reclaim delay Sometimes, application responses become bad under heavy memory load. Applications take a bit time to reclaim memory. The statistics, how long memory reclaim takes, will be useful to measure memory usage. This patch adds accounting memory reclaim to per-task-delay-accounting for accounting the time of do_try_to_free_pages(). <i.e> - When System is under low memory load, memory reclaim may not occur. $ free total used free shared buffers cached Mem: 8197800 1577300 6620500 0 4808 1516724 -/+ buffers/cache: 55768 8142032 Swap: 16386292 0 16386292 $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 5069748 10612 3014060 0 0 0 0 3 26 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 4 22 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 3 18 0 0 100 0 Measure the time of tar command. $ ls -s test.dat 1501472 test.dat $ time tar cvf test.tar test.dat real 0m13.388s user 0m0.116s sys 0m5.304s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 428 5528345500 5477116080 62749891 IO count delay total 338 8078977189 SWAP count delay total 0 0 RECLAIM count delay total 0 0 - When system is under heavy memory load memory reclaim may occur. $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 7159032 49724 1812 3012 0 0 0 0 3 24 0 0 100 0 0 0 7159032 49724 1812 3012 0 0 0 0 4 24 0 0 100 0 0 0 7159032 49848 1812 3012 0 0 0 0 3 22 0 0 100 0 In this case, one process uses more 8G memory by execution of malloc() and memset(). $ time tar cvf test.tar test.dat real 1m38.563s <- increased by 85 sec user 0m0.140s sys 0m7.060s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 9021 7140446250 7315277975 923201824 IO count delay total 8965 90466349669 SWAP count delay total 3 21036367 RECLAIM count delay total 740 61011951153 In the later case, the value of RECLAIM is increasing. So, taskstats can show how much memory reclaim influences TAT. Signed-off-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujistu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 15:48:52 +07:00
#include <linux/delayacct.h>
#include <linux/sysctl.h>
vmscan: all_unreclaimable() use zone->all_unreclaimable as a name all_unreclaimable check in direct reclaim has been introduced at 2.6.19 by following commit. 2006 Sep 25; commit 408d8544; oom: use unreclaimable info And it went through strange history. firstly, following commit broke the logic unintentionally. 2008 Apr 29; commit a41f24ea; page allocator: smarter retry of costly-order allocations Two years later, I've found obvious meaningless code fragment and restored original intention by following commit. 2010 Jun 04; commit bb21c7ce; vmscan: fix do_try_to_free_pages() return value when priority==0 But, the logic didn't works when 32bit highmem system goes hibernation and Minchan slightly changed the algorithm and fixed it . 2010 Sep 22: commit d1908362: vmscan: check all_unreclaimable in direct reclaim path But, recently, Andrey Vagin found the new corner case. Look, struct zone { .. int all_unreclaimable; .. unsigned long pages_scanned; .. } zone->all_unreclaimable and zone->pages_scanned are neigher atomic variables nor protected by lock. Therefore zones can become a state of zone->page_scanned=0 and zone->all_unreclaimable=1. In this case, current all_unreclaimable() return false even though zone->all_unreclaimabe=1. This resulted in the kernel hanging up when executing a loop of the form 1. fork 2. mmap 3. touch memory 4. read memory 5. munmmap as described in http://www.gossamer-threads.com/lists/linux/kernel/1348725#1348725 Is this ignorable minor issue? No. Unfortunately, x86 has very small dma zone and it become zone->all_unreclamble=1 easily. and if it become all_unreclaimable=1, it never restore all_unreclaimable=0. Why? if all_unreclaimable=1, vmscan only try DEF_PRIORITY reclaim and a-few-lru-pages>>DEF_PRIORITY always makes 0. that mean no page scan at all! Eventually, oom-killer never works on such systems. That said, we can't use zone->pages_scanned for this purpose. This patch restore all_unreclaimable() use zone->all_unreclaimable as old. and in addition, to add oom_killer_disabled check to avoid reintroduce the issue of commit d1908362 ("vmscan: check all_unreclaimable in direct reclaim path"). Reported-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-15 05:22:12 +07:00
#include <linux/oom.h>
#include <linux/prefetch.h>
#include <linux/printk.h>
dax: support dirty DAX entries in radix tree Add support for tracking dirty DAX entries in the struct address_space radix tree. This tree is already used for dirty page writeback, and it already supports the use of exceptional (non struct page*) entries. In order to properly track dirty DAX pages we will insert new exceptional entries into the radix tree that represent dirty DAX PTE or PMD pages. These exceptional entries will also contain the writeback addresses for the PTE or PMD faults that we can use at fsync/msync time. There are currently two types of exceptional entries (shmem and shadow) that can be placed into the radix tree, and this adds a third. We rely on the fact that only one type of exceptional entry can be found in a given radix tree based on its usage. This happens for free with DAX vs shmem but we explicitly prevent shadow entries from being added to radix trees for DAX mappings. The only shadow entries that would be generated for DAX radix trees would be to track zero page mappings that were created for holes. These pages would receive minimal benefit from having shadow entries, and the choice to have only one type of exceptional entry in a given radix tree makes the logic simpler both in clear_exceptional_entry() and in the rest of DAX. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jan Kara <jack@suse.com> Cc: Jeff Layton <jlayton@poochiereds.net> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-23 06:10:40 +07:00
#include <linux/dax.h>
#include <asm/tlbflush.h>
#include <asm/div64.h>
#include <linux/swapops.h>
mm: avoid reinserting isolated balloon pages into LRU lists Isolated balloon pages can wrongly end up in LRU lists when migrate_pages() finishes its round without draining all the isolated page list. The same issue can happen when reclaim_clean_pages_from_list() tries to reclaim pages from an isolated page list, before migration, in the CMA path. Such balloon page leak opens a race window against LRU lists shrinkers that leads us to the following kernel panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffff810c2625>] shrink_page_list+0x24e/0x897 PGD 3cda2067 PUD 3d713067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 340 Comm: kswapd0 Not tainted 3.12.0-rc1-22626-g4367597 #87 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: shrink_page_list+0x24e/0x897 RSP: 0000:ffff88003da499b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88003e82bd60 RCX: 00000000000657d5 RDX: 0000000000000000 RSI: 000000000000031f RDI: ffff88003e82bd40 RBP: ffff88003da49ab0 R08: 0000000000000001 R09: 0000000081121a45 R10: ffffffff81121a45 R11: ffff88003c4a9a28 R12: ffff88003e82bd40 R13: ffff88003da0e800 R14: 0000000000000001 R15: ffff88003da49d58 FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000067d9000 CR3: 000000003ace5000 CR4: 00000000000407b0 Call Trace: shrink_inactive_list+0x240/0x3de shrink_lruvec+0x3e0/0x566 __shrink_zone+0x94/0x178 shrink_zone+0x3a/0x82 balance_pgdat+0x32a/0x4c2 kswapd+0x2f0/0x372 kthread+0xa2/0xaa ret_from_fork+0x7c/0xb0 Code: 80 7d 8f 01 48 83 95 68 ff ff ff 00 4c 89 e7 e8 5a 7b 00 00 48 85 c0 49 89 c5 75 08 80 7d 8f 00 74 3e eb 31 48 8b 80 18 01 00 00 <48> 8b 74 0d 48 8b 78 30 be 02 00 00 00 ff d2 eb RIP [<ffffffff810c2625>] shrink_page_list+0x24e/0x897 RSP <ffff88003da499b8> CR2: 0000000000000028 ---[ end trace 703d2451af6ffbfd ]--- Kernel panic - not syncing: Fatal exception This patch fixes the issue, by assuring the proper tests are made at putback_movable_pages() & reclaim_clean_pages_from_list() to avoid isolated balloon pages being wrongly reinserted in LRU lists. [akpm@linux-foundation.org: clarify awkward comment text] Signed-off-by: Rafael Aquini <aquini@redhat.com> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-01 03:45:16 +07:00
#include <linux/balloon_compaction.h>
#include "internal.h"
#define CREATE_TRACE_POINTS
#include <trace/events/vmscan.h>
struct scan_control {
/* How many pages shrink_list() should reclaim */
unsigned long nr_to_reclaim;
/* This context's GFP mask */
gfp_t gfp_mask;
/* Allocation order */
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 18:03:16 +07:00
int order;
/*
* Nodemask of nodes allowed by the caller. If NULL, all nodes
* are scanned.
*/
nodemask_t *nodemask;
/*
* The memory cgroup that hit its limit and as a result is the
* primary target of this reclaim invocation.
*/
struct mem_cgroup *target_mem_cgroup;
/* Scan (total_size >> priority) pages at once */
int priority;
/* The highest zone to isolate pages for reclaim from */
enum zone_type reclaim_idx;
unsigned int may_writepage:1;
/* Can mapped pages be reclaimed? */
unsigned int may_unmap:1;
/* Can pages be swapped as part of reclaim? */
unsigned int may_swap:1;
mm: memcontrol: default hierarchy interface for memory Introduce the basic control files to account, partition, and limit memory using cgroups in default hierarchy mode. This interface versioning allows us to address fundamental design issues in the existing memory cgroup interface, further explained below. The old interface will be maintained indefinitely, but a clearer model and improved workload performance should encourage existing users to switch over to the new one eventually. The control files are thus: - memory.current shows the current consumption of the cgroup and its descendants, in bytes. - memory.low configures the lower end of the cgroup's expected memory consumption range. The kernel considers memory below that boundary to be a reserve - the minimum that the workload needs in order to make forward progress - and generally avoids reclaiming it, unless there is an imminent risk of entering an OOM situation. - memory.high configures the upper end of the cgroup's expected memory consumption range. A cgroup whose consumption grows beyond this threshold is forced into direct reclaim, to work off the excess and to throttle new allocations heavily, but is generally allowed to continue and the OOM killer is not invoked. - memory.max configures the hard maximum amount of memory that the cgroup is allowed to consume before the OOM killer is invoked. - memory.events shows event counters that indicate how often the cgroup was reclaimed while below memory.low, how often it was forced to reclaim excess beyond memory.high, how often it hit memory.max, and how often it entered OOM due to memory.max. This allows users to identify configuration problems when observing a degradation in workload performance. An overcommitted system will have an increased rate of low boundary breaches, whereas increased rates of high limit breaches, maximum hits, or even OOM situations will indicate internally overcommitted cgroups. For existing users of memory cgroups, the following deviations from the current interface are worth pointing out and explaining: - The original lower boundary, the soft limit, is defined as a limit that is per default unset. As a result, the set of cgroups that global reclaim prefers is opt-in, rather than opt-out. The costs for optimizing these mostly negative lookups are so high that the implementation, despite its enormous size, does not even provide the basic desirable behavior. First off, the soft limit has no hierarchical meaning. All configured groups are organized in a global rbtree and treated like equal peers, regardless where they are located in the hierarchy. This makes subtree delegation impossible. Second, the soft limit reclaim pass is so aggressive that it not just introduces high allocation latencies into the system, but also impacts system performance due to overreclaim, to the point where the feature becomes self-defeating. The memory.low boundary on the other hand is a top-down allocated reserve. A cgroup enjoys reclaim protection when it and all its ancestors are below their low boundaries, which makes delegation of subtrees possible. Secondly, new cgroups have no reserve per default and in the common case most cgroups are eligible for the preferred reclaim pass. This allows the new low boundary to be efficiently implemented with just a minor addition to the generic reclaim code, without the need for out-of-band data structures and reclaim passes. Because the generic reclaim code considers all cgroups except for the ones running low in the preferred first reclaim pass, overreclaim of individual groups is eliminated as well, resulting in much better overall workload performance. - The original high boundary, the hard limit, is defined as a strict limit that can not budge, even if the OOM killer has to be called. But this generally goes against the goal of making the most out of the available memory. The memory consumption of workloads varies during runtime, and that requires users to overcommit. But doing that with a strict upper limit requires either a fairly accurate prediction of the working set size or adding slack to the limit. Since working set size estimation is hard and error prone, and getting it wrong results in OOM kills, most users tend to err on the side of a looser limit and end up wasting precious resources. The memory.high boundary on the other hand can be set much more conservatively. When hit, it throttles allocations by forcing them into direct reclaim to work off the excess, but it never invokes the OOM killer. As a result, a high boundary that is chosen too aggressively will not terminate the processes, but instead it will lead to gradual performance degradation. The user can monitor this and make corrections until the minimal memory footprint that still gives acceptable performance is found. In extreme cases, with many concurrent allocations and a complete breakdown of reclaim progress within the group, the high boundary can be exceeded. But even then it's mostly better to satisfy the allocation from the slack available in other groups or the rest of the system than killing the group. Otherwise, memory.max is there to limit this type of spillover and ultimately contain buggy or even malicious applications. - The original control file names are unwieldy and inconsistent in many different ways. For example, the upper boundary hit count is exported in the memory.failcnt file, but an OOM event count has to be manually counted by listening to memory.oom_control events, and lower boundary / soft limit events have to be counted by first setting a threshold for that value and then counting those events. Also, usage and limit files encode their units in the filename. That makes the filenames very long, even though this is not information that a user needs to be reminded of every time they type out those names. To address these naming issues, as well as to signal clearly that the new interface carries a new configuration model, the naming conventions in it necessarily differ from the old interface. - The original limit files indicate the state of an unset limit with a very high number, and a configured limit can be unset by echoing -1 into those files. But that very high number is implementation and architecture dependent and not very descriptive. And while -1 can be understood as an underflow into the highest possible value, -2 or -10M etc. do not work, so it's not inconsistent. memory.low, memory.high, and memory.max will use the string "infinity" to indicate and set the highest possible value. [akpm@linux-foundation.org: use seq_puts() for basic strings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:06 +07:00
/* Can cgroups be reclaimed below their normal consumption range? */
unsigned int may_thrash:1;
unsigned int hibernation_mode:1;
/* One of the zones is ready for compaction */
unsigned int compaction_ready:1;
/* Incremented by the number of inactive pages that were scanned */
unsigned long nr_scanned;
/* Number of pages freed so far during a call to shrink_zones() */
unsigned long nr_reclaimed;
};
#ifdef ARCH_HAS_PREFETCH
#define prefetch_prev_lru_page(_page, _base, _field) \
do { \
if ((_page)->lru.prev != _base) { \
struct page *prev; \
\
prev = lru_to_page(&(_page->lru)); \
prefetch(&prev->_field); \
} \
} while (0)
#else
#define prefetch_prev_lru_page(_page, _base, _field) do { } while (0)
#endif
#ifdef ARCH_HAS_PREFETCHW
#define prefetchw_prev_lru_page(_page, _base, _field) \
do { \
if ((_page)->lru.prev != _base) { \
struct page *prev; \
\
prev = lru_to_page(&(_page->lru)); \
prefetchw(&prev->_field); \
} \
} while (0)
#else
#define prefetchw_prev_lru_page(_page, _base, _field) do { } while (0)
#endif
/*
* From 0 .. 100. Higher means more swappy.
*/
int vm_swappiness = 60;
/*
* The total number of pages which are beyond the high watermark within all
* zones.
*/
unsigned long vm_total_pages;
static LIST_HEAD(shrinker_list);
static DECLARE_RWSEM(shrinker_rwsem);
#ifdef CONFIG_MEMCG
static bool global_reclaim(struct scan_control *sc)
{
return !sc->target_mem_cgroup;
}
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use Because writeback wasn't cgroup aware before, the usual dirty throttling mechanism in balance_dirty_pages() didn't work for processes under memcg limit. The writeback path didn't know how much memory is available or how fast the dirty pages are being written out for a given memcg and balance_dirty_pages() didn't have any measure of IO back pressure for the memcg. To work around the issue, memcg implemented an ad-hoc dirty throttling mechanism in the direct reclaim path by stalling on pages under writeback which are encountered during direct reclaim scan. This is rather ugly and crude - none of the configurability, fairness, or bandwidth-proportional distribution of the normal path. The previous patches implemented proper memcg aware dirty throttling when cgroup writeback is in use making the ad-hoc mechanism unnecessary. This patch disables direct reclaim stalling for such case. Note: I disabled the parts which seemed obvious and it behaves fine while testing but my understanding of this code path is rudimentary and it's quite possible that I got something wrong. Please let me know if I got some wrong or more global_reclaim() sites should be updated. v2: The original patch removed the direct stalling mechanism which breaks legacy hierarchies. Conditionalize instead of removing. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:23:36 +07:00
/**
* sane_reclaim - is the usual dirty throttling mechanism operational?
* @sc: scan_control in question
*
* The normal page dirty throttling mechanism in balance_dirty_pages() is
* completely broken with the legacy memcg and direct stalling in
* shrink_page_list() is used for throttling instead, which lacks all the
* niceties such as fairness, adaptive pausing, bandwidth proportional
* allocation and configurability.
*
* This function tests whether the vmscan currently in progress can assume
* that the normal dirty throttling mechanism is operational.
*/
static bool sane_reclaim(struct scan_control *sc)
{
struct mem_cgroup *memcg = sc->target_mem_cgroup;
if (!memcg)
return true;
#ifdef CONFIG_CGROUP_WRITEBACK
Merge branch 'for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "The cgroup core saw several significant updates this cycle: - percpu_rwsem for threadgroup locking is reinstated. This was temporarily dropped due to down_write latency issues. Oleg's rework of percpu_rwsem which is scheduled to be merged in this merge window resolves the issue. - On the v2 hierarchy, when controllers are enabled and disabled, all operations are atomic and can fail and revert cleanly. This allows ->can_attach() failure which is necessary for cpu RT slices. - Tasks now stay associated with the original cgroups after exit until released. This allows tracking resources held by zombies (e.g. pids) and makes it easy to find out where zombies came from on the v2 hierarchy. The pids controller was broken before these changes as zombies escaped the limits; unfortunately, updating this behavior required too many invasive changes and I don't think it's a good idea to backport them, so the pids controller on 4.3, the first version which included the pids controller, will stay broken at least until I'm sure about the cgroup core changes. - Optimization of a couple common tests using static_key" * 'for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (38 commits) cgroup: fix race condition around termination check in css_task_iter_next() blkcg: don't create "io.stat" on the root cgroup cgroup: drop cgroup__DEVEL__legacy_files_on_dfl cgroup: replace error handling in cgroup_init() with WARN_ON()s cgroup: add cgroup_subsys->free() method and use it to fix pids controller cgroup: keep zombies associated with their original cgroups cgroup: make css_set_rwsem a spinlock and rename it to css_set_lock cgroup: don't hold css_set_rwsem across css task iteration cgroup: reorganize css_task_iter functions cgroup: factor out css_set_move_task() cgroup: keep css_set and task lists in chronological order cgroup: make cgroup_destroy_locked() test cgroup_is_populated() cgroup: make css_sets pin the associated cgroups cgroup: relocate cgroup_[try]get/put() cgroup: move check_for_release() invocation cgroup: replace cgroup_has_tasks() with cgroup_is_populated() cgroup: make cgroup->nr_populated count the number of populated css_sets cgroup: remove an unused parameter from cgroup_task_migrate() cgroup: fix too early usage of static_branch_disable() cgroup: make cgroup_update_dfl_csses() migrate all target processes atomically ...
2015-11-06 05:51:32 +07:00
if (cgroup_subsys_on_dfl(memory_cgrp_subsys))
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use Because writeback wasn't cgroup aware before, the usual dirty throttling mechanism in balance_dirty_pages() didn't work for processes under memcg limit. The writeback path didn't know how much memory is available or how fast the dirty pages are being written out for a given memcg and balance_dirty_pages() didn't have any measure of IO back pressure for the memcg. To work around the issue, memcg implemented an ad-hoc dirty throttling mechanism in the direct reclaim path by stalling on pages under writeback which are encountered during direct reclaim scan. This is rather ugly and crude - none of the configurability, fairness, or bandwidth-proportional distribution of the normal path. The previous patches implemented proper memcg aware dirty throttling when cgroup writeback is in use making the ad-hoc mechanism unnecessary. This patch disables direct reclaim stalling for such case. Note: I disabled the parts which seemed obvious and it behaves fine while testing but my understanding of this code path is rudimentary and it's quite possible that I got something wrong. Please let me know if I got some wrong or more global_reclaim() sites should be updated. v2: The original patch removed the direct stalling mechanism which breaks legacy hierarchies. Conditionalize instead of removing. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:23:36 +07:00
return true;
#endif
return false;
}
#else
static bool global_reclaim(struct scan_control *sc)
{
return true;
}
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use Because writeback wasn't cgroup aware before, the usual dirty throttling mechanism in balance_dirty_pages() didn't work for processes under memcg limit. The writeback path didn't know how much memory is available or how fast the dirty pages are being written out for a given memcg and balance_dirty_pages() didn't have any measure of IO back pressure for the memcg. To work around the issue, memcg implemented an ad-hoc dirty throttling mechanism in the direct reclaim path by stalling on pages under writeback which are encountered during direct reclaim scan. This is rather ugly and crude - none of the configurability, fairness, or bandwidth-proportional distribution of the normal path. The previous patches implemented proper memcg aware dirty throttling when cgroup writeback is in use making the ad-hoc mechanism unnecessary. This patch disables direct reclaim stalling for such case. Note: I disabled the parts which seemed obvious and it behaves fine while testing but my understanding of this code path is rudimentary and it's quite possible that I got something wrong. Please let me know if I got some wrong or more global_reclaim() sites should be updated. v2: The original patch removed the direct stalling mechanism which breaks legacy hierarchies. Conditionalize instead of removing. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:23:36 +07:00
static bool sane_reclaim(struct scan_control *sc)
{
return true;
}
#endif
/*
* This misses isolated pages which are not accounted for to save counters.
* As the data only determines if reclaim or compaction continues, it is
* not expected that isolated pages will be a dominating factor.
*/
unsigned long zone_reclaimable_pages(struct zone *zone)
{
unsigned long nr;
nr = zone_page_state_snapshot(zone, NR_ZONE_INACTIVE_FILE) +
zone_page_state_snapshot(zone, NR_ZONE_ACTIVE_FILE);
if (get_nr_swap_pages() > 0)
nr += zone_page_state_snapshot(zone, NR_ZONE_INACTIVE_ANON) +
zone_page_state_snapshot(zone, NR_ZONE_ACTIVE_ANON);
return nr;
}
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
unsigned long pgdat_reclaimable_pages(struct pglist_data *pgdat)
{
unsigned long nr;
nr = node_page_state_snapshot(pgdat, NR_ACTIVE_FILE) +
node_page_state_snapshot(pgdat, NR_INACTIVE_FILE) +
node_page_state_snapshot(pgdat, NR_ISOLATED_FILE);
mm: vmscan: fix do_try_to_free_pages() livelock This patch is based on KOSAKI's work and I add a little more description, please refer https://lkml.org/lkml/2012/6/14/74. Currently, I found system can enter a state that there are lots of free pages in a zone but only order-0 and order-1 pages which means the zone is heavily fragmented, then high order allocation could make direct reclaim path's long stall(ex, 60 seconds) especially in no swap and no compaciton enviroment. This problem happened on v3.4, but it seems issue still lives in current tree, the reason is do_try_to_free_pages enter live lock: kswapd will go to sleep if the zones have been fully scanned and are still not balanced. As kswapd thinks there's little point trying all over again to avoid infinite loop. Instead it changes order from high-order to 0-order because kswapd think order-0 is the most important. Look at 73ce02e9 in detail. If watermarks are ok, kswapd will go back to sleep and may leave zone->all_unreclaimable =3D 0. It assume high-order users can still perform direct reclaim if they wish. Direct reclaim continue to reclaim for a high order which is not a COSTLY_ORDER without oom-killer until kswapd turn on zone->all_unreclaimble= . This is because to avoid too early oom-kill. So it means direct_reclaim depends on kswapd to break this loop. In worst case, direct-reclaim may continue to page reclaim forever when kswapd sleeps forever until someone like watchdog detect and finally kill the process. As described in: http://thread.gmane.org/gmane.linux.kernel.mm/103737 We can't turn on zone->all_unreclaimable from direct reclaim path because direct reclaim path don't take any lock and this way is racy. Thus this patch removes zone->all_unreclaimable field completely and recalculates zone reclaimable state every time. Note: we can't take the idea that direct-reclaim see zone->pages_scanned directly and kswapd continue to use zone->all_unreclaimable. Because, it is racy. commit 929bea7c71 (vmscan: all_unreclaimable() use zone->all_unreclaimable as a name) describes the detail. [akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()] Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Nick Piggin <npiggin@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Neil Zhang <zhangwm@marvell.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Lisa Du <cldu@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 04:22:36 +07:00
if (get_nr_swap_pages() > 0)
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
nr += node_page_state_snapshot(pgdat, NR_ACTIVE_ANON) +
node_page_state_snapshot(pgdat, NR_INACTIVE_ANON) +
node_page_state_snapshot(pgdat, NR_ISOLATED_ANON);
mm: vmscan: fix do_try_to_free_pages() livelock This patch is based on KOSAKI's work and I add a little more description, please refer https://lkml.org/lkml/2012/6/14/74. Currently, I found system can enter a state that there are lots of free pages in a zone but only order-0 and order-1 pages which means the zone is heavily fragmented, then high order allocation could make direct reclaim path's long stall(ex, 60 seconds) especially in no swap and no compaciton enviroment. This problem happened on v3.4, but it seems issue still lives in current tree, the reason is do_try_to_free_pages enter live lock: kswapd will go to sleep if the zones have been fully scanned and are still not balanced. As kswapd thinks there's little point trying all over again to avoid infinite loop. Instead it changes order from high-order to 0-order because kswapd think order-0 is the most important. Look at 73ce02e9 in detail. If watermarks are ok, kswapd will go back to sleep and may leave zone->all_unreclaimable =3D 0. It assume high-order users can still perform direct reclaim if they wish. Direct reclaim continue to reclaim for a high order which is not a COSTLY_ORDER without oom-killer until kswapd turn on zone->all_unreclaimble= . This is because to avoid too early oom-kill. So it means direct_reclaim depends on kswapd to break this loop. In worst case, direct-reclaim may continue to page reclaim forever when kswapd sleeps forever until someone like watchdog detect and finally kill the process. As described in: http://thread.gmane.org/gmane.linux.kernel.mm/103737 We can't turn on zone->all_unreclaimable from direct reclaim path because direct reclaim path don't take any lock and this way is racy. Thus this patch removes zone->all_unreclaimable field completely and recalculates zone reclaimable state every time. Note: we can't take the idea that direct-reclaim see zone->pages_scanned directly and kswapd continue to use zone->all_unreclaimable. Because, it is racy. commit 929bea7c71 (vmscan: all_unreclaimable() use zone->all_unreclaimable as a name) describes the detail. [akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()] Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Nick Piggin <npiggin@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Neil Zhang <zhangwm@marvell.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Lisa Du <cldu@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 04:22:36 +07:00
return nr;
}
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
bool pgdat_reclaimable(struct pglist_data *pgdat)
mm: vmscan: fix do_try_to_free_pages() livelock This patch is based on KOSAKI's work and I add a little more description, please refer https://lkml.org/lkml/2012/6/14/74. Currently, I found system can enter a state that there are lots of free pages in a zone but only order-0 and order-1 pages which means the zone is heavily fragmented, then high order allocation could make direct reclaim path's long stall(ex, 60 seconds) especially in no swap and no compaciton enviroment. This problem happened on v3.4, but it seems issue still lives in current tree, the reason is do_try_to_free_pages enter live lock: kswapd will go to sleep if the zones have been fully scanned and are still not balanced. As kswapd thinks there's little point trying all over again to avoid infinite loop. Instead it changes order from high-order to 0-order because kswapd think order-0 is the most important. Look at 73ce02e9 in detail. If watermarks are ok, kswapd will go back to sleep and may leave zone->all_unreclaimable =3D 0. It assume high-order users can still perform direct reclaim if they wish. Direct reclaim continue to reclaim for a high order which is not a COSTLY_ORDER without oom-killer until kswapd turn on zone->all_unreclaimble= . This is because to avoid too early oom-kill. So it means direct_reclaim depends on kswapd to break this loop. In worst case, direct-reclaim may continue to page reclaim forever when kswapd sleeps forever until someone like watchdog detect and finally kill the process. As described in: http://thread.gmane.org/gmane.linux.kernel.mm/103737 We can't turn on zone->all_unreclaimable from direct reclaim path because direct reclaim path don't take any lock and this way is racy. Thus this patch removes zone->all_unreclaimable field completely and recalculates zone reclaimable state every time. Note: we can't take the idea that direct-reclaim see zone->pages_scanned directly and kswapd continue to use zone->all_unreclaimable. Because, it is racy. commit 929bea7c71 (vmscan: all_unreclaimable() use zone->all_unreclaimable as a name) describes the detail. [akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()] Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Nick Piggin <npiggin@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Neil Zhang <zhangwm@marvell.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Lisa Du <cldu@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 04:22:36 +07:00
{
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
return node_page_state_snapshot(pgdat, NR_PAGES_SCANNED) <
pgdat_reclaimable_pages(pgdat) * 6;
mm: vmscan: fix do_try_to_free_pages() livelock This patch is based on KOSAKI's work and I add a little more description, please refer https://lkml.org/lkml/2012/6/14/74. Currently, I found system can enter a state that there are lots of free pages in a zone but only order-0 and order-1 pages which means the zone is heavily fragmented, then high order allocation could make direct reclaim path's long stall(ex, 60 seconds) especially in no swap and no compaciton enviroment. This problem happened on v3.4, but it seems issue still lives in current tree, the reason is do_try_to_free_pages enter live lock: kswapd will go to sleep if the zones have been fully scanned and are still not balanced. As kswapd thinks there's little point trying all over again to avoid infinite loop. Instead it changes order from high-order to 0-order because kswapd think order-0 is the most important. Look at 73ce02e9 in detail. If watermarks are ok, kswapd will go back to sleep and may leave zone->all_unreclaimable =3D 0. It assume high-order users can still perform direct reclaim if they wish. Direct reclaim continue to reclaim for a high order which is not a COSTLY_ORDER without oom-killer until kswapd turn on zone->all_unreclaimble= . This is because to avoid too early oom-kill. So it means direct_reclaim depends on kswapd to break this loop. In worst case, direct-reclaim may continue to page reclaim forever when kswapd sleeps forever until someone like watchdog detect and finally kill the process. As described in: http://thread.gmane.org/gmane.linux.kernel.mm/103737 We can't turn on zone->all_unreclaimable from direct reclaim path because direct reclaim path don't take any lock and this way is racy. Thus this patch removes zone->all_unreclaimable field completely and recalculates zone reclaimable state every time. Note: we can't take the idea that direct-reclaim see zone->pages_scanned directly and kswapd continue to use zone->all_unreclaimable. Because, it is racy. commit 929bea7c71 (vmscan: all_unreclaimable() use zone->all_unreclaimable as a name) describes the detail. [akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()] Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Nick Piggin <npiggin@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Neil Zhang <zhangwm@marvell.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Lisa Du <cldu@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 04:22:36 +07:00
}
unsigned long lruvec_lru_size(struct lruvec *lruvec, enum lru_list lru)
{
if (!mem_cgroup_disabled())
return mem_cgroup_get_lru_size(lruvec, lru);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
return node_page_state(lruvec_pgdat(lruvec), NR_LRU_BASE + lru);
}
/*
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
* Add a shrinker callback to be called from the vm.
*/
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
int register_shrinker(struct shrinker *shrinker)
{
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
size_t size = sizeof(*shrinker->nr_deferred);
if (shrinker->flags & SHRINKER_NUMA_AWARE)
size *= nr_node_ids;
shrinker->nr_deferred = kzalloc(size, GFP_KERNEL);
if (!shrinker->nr_deferred)
return -ENOMEM;
down_write(&shrinker_rwsem);
list_add_tail(&shrinker->list, &shrinker_list);
up_write(&shrinker_rwsem);
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
return 0;
}
EXPORT_SYMBOL(register_shrinker);
/*
* Remove one
*/
void unregister_shrinker(struct shrinker *shrinker)
{
down_write(&shrinker_rwsem);
list_del(&shrinker->list);
up_write(&shrinker_rwsem);
kfree(shrinker->nr_deferred);
}
EXPORT_SYMBOL(unregister_shrinker);
#define SHRINK_BATCH 128
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
static unsigned long do_shrink_slab(struct shrink_control *shrinkctl,
struct shrinker *shrinker,
unsigned long nr_scanned,
unsigned long nr_eligible)
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
{
unsigned long freed = 0;
unsigned long long delta;
long total_scan;
long freeable;
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
long nr;
long new_nr;
int nid = shrinkctl->nid;
long batch_size = shrinker->batch ? shrinker->batch
: SHRINK_BATCH;
freeable = shrinker->count_objects(shrinker, shrinkctl);
if (freeable == 0)
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
return 0;
/*
* copy the current shrinker scan count into a local variable
* and zero it so that other concurrent shrinker invocations
* don't also do this scanning work.
*/
nr = atomic_long_xchg(&shrinker->nr_deferred[nid], 0);
total_scan = nr;
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
delta = (4 * nr_scanned) / shrinker->seeks;
delta *= freeable;
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
do_div(delta, nr_eligible + 1);
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
total_scan += delta;
if (total_scan < 0) {
pr_err("shrink_slab: %pF negative objects to delete nr=%ld\n",
shrinker: Kill old ->shrink API. There are no more users of this API, so kill it dead, dead, dead and quietly bury the corpse in a shallow, unmarked grave in a dark forest deep in the hills... [glommer@openvz.org: added flowers to the grave] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Greg Thelen <gthelen@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:16 +07:00
shrinker->scan_objects, total_scan);
total_scan = freeable;
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
}
/*
* We need to avoid excessive windup on filesystem shrinkers
* due to large numbers of GFP_NOFS allocations causing the
* shrinkers to return -1 all the time. This results in a large
* nr being built up so when a shrink that can do some work
* comes along it empties the entire cache due to nr >>>
* freeable. This is bad for sustaining a working set in
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
* memory.
*
* Hence only allow the shrinker to scan the entire cache when
* a large delta change is calculated directly.
*/
if (delta < freeable / 4)
total_scan = min(total_scan, freeable / 2);
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
/*
* Avoid risking looping forever due to too large nr value:
* never try to free more than twice the estimate number of
* freeable entries.
*/
if (total_scan > freeable * 2)
total_scan = freeable * 2;
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
trace_mm_shrink_slab_start(shrinker, shrinkctl, nr,
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
nr_scanned, nr_eligible,
freeable, delta, total_scan);
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
mm: vmscan: shrink all slab objects if tight on memory When reclaiming kmem, we currently don't scan slabs that have less than batch_size objects (see shrink_slab_node()): while (total_scan >= batch_size) { shrinkctl->nr_to_scan = batch_size; shrinker->scan_objects(shrinker, shrinkctl); total_scan -= batch_size; } If there are only a few shrinkers available, such a behavior won't cause any problems, because the batch_size is usually small, but if we have a lot of slab shrinkers, which is perfectly possible since FS shrinkers are now per-superblock, we can end up with hundreds of megabytes of practically unreclaimable kmem objects. For instance, mounting a thousand of ext2 FS images with a hundred of files in each and iterating over all the files using du(1) will result in about 200 Mb of FS caches that cannot be dropped even with the aid of the vm.drop_caches sysctl! This problem was initially pointed out by Glauber Costa [*]. Glauber proposed to fix it by making the shrink_slab() always take at least one pass, to put it simply, turning the scan loop above to a do{}while() loop. However, this proposal was rejected, because it could result in more aggressive and frequent slab shrinking even under low memory pressure when total_scan is naturally very small. This patch is a slightly modified version of Glauber's approach. Similarly to Glauber's patch, it makes shrink_slab() scan less than batch_size objects, but only if the total number of objects we want to scan (total_scan) is greater than the total number of objects available (max_pass). Since total_scan is biased as half max_pass if the current delta change is small: if (delta < max_pass / 4) total_scan = min(total_scan, max_pass / 2); this is only possible if we are scanning at high prio. That said, this patch shouldn't change the vmscan behaviour if the memory pressure is low, but if we are tight on memory, we will do our best by trying to reclaim all available objects, which sounds reasonable. [*] http://www.spinics.net/lists/cgroups/msg06913.html Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Glauber Costa <glommer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-24 06:53:22 +07:00
/*
* Normally, we should not scan less than batch_size objects in one
* pass to avoid too frequent shrinker calls, but if the slab has less
* than batch_size objects in total and we are really tight on memory,
* we will try to reclaim all available objects, otherwise we can end
* up failing allocations although there are plenty of reclaimable
* objects spread over several slabs with usage less than the
* batch_size.
*
* We detect the "tight on memory" situations by looking at the total
* number of objects we want to scan (total_scan). If it is greater
* than the total number of objects on slab (freeable), we must be
mm: vmscan: shrink all slab objects if tight on memory When reclaiming kmem, we currently don't scan slabs that have less than batch_size objects (see shrink_slab_node()): while (total_scan >= batch_size) { shrinkctl->nr_to_scan = batch_size; shrinker->scan_objects(shrinker, shrinkctl); total_scan -= batch_size; } If there are only a few shrinkers available, such a behavior won't cause any problems, because the batch_size is usually small, but if we have a lot of slab shrinkers, which is perfectly possible since FS shrinkers are now per-superblock, we can end up with hundreds of megabytes of practically unreclaimable kmem objects. For instance, mounting a thousand of ext2 FS images with a hundred of files in each and iterating over all the files using du(1) will result in about 200 Mb of FS caches that cannot be dropped even with the aid of the vm.drop_caches sysctl! This problem was initially pointed out by Glauber Costa [*]. Glauber proposed to fix it by making the shrink_slab() always take at least one pass, to put it simply, turning the scan loop above to a do{}while() loop. However, this proposal was rejected, because it could result in more aggressive and frequent slab shrinking even under low memory pressure when total_scan is naturally very small. This patch is a slightly modified version of Glauber's approach. Similarly to Glauber's patch, it makes shrink_slab() scan less than batch_size objects, but only if the total number of objects we want to scan (total_scan) is greater than the total number of objects available (max_pass). Since total_scan is biased as half max_pass if the current delta change is small: if (delta < max_pass / 4) total_scan = min(total_scan, max_pass / 2); this is only possible if we are scanning at high prio. That said, this patch shouldn't change the vmscan behaviour if the memory pressure is low, but if we are tight on memory, we will do our best by trying to reclaim all available objects, which sounds reasonable. [*] http://www.spinics.net/lists/cgroups/msg06913.html Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Glauber Costa <glommer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-24 06:53:22 +07:00
* scanning at high prio and therefore should try to reclaim as much as
* possible.
*/
while (total_scan >= batch_size ||
total_scan >= freeable) {
shrinker: Kill old ->shrink API. There are no more users of this API, so kill it dead, dead, dead and quietly bury the corpse in a shallow, unmarked grave in a dark forest deep in the hills... [glommer@openvz.org: added flowers to the grave] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Greg Thelen <gthelen@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:16 +07:00
unsigned long ret;
mm: vmscan: shrink all slab objects if tight on memory When reclaiming kmem, we currently don't scan slabs that have less than batch_size objects (see shrink_slab_node()): while (total_scan >= batch_size) { shrinkctl->nr_to_scan = batch_size; shrinker->scan_objects(shrinker, shrinkctl); total_scan -= batch_size; } If there are only a few shrinkers available, such a behavior won't cause any problems, because the batch_size is usually small, but if we have a lot of slab shrinkers, which is perfectly possible since FS shrinkers are now per-superblock, we can end up with hundreds of megabytes of practically unreclaimable kmem objects. For instance, mounting a thousand of ext2 FS images with a hundred of files in each and iterating over all the files using du(1) will result in about 200 Mb of FS caches that cannot be dropped even with the aid of the vm.drop_caches sysctl! This problem was initially pointed out by Glauber Costa [*]. Glauber proposed to fix it by making the shrink_slab() always take at least one pass, to put it simply, turning the scan loop above to a do{}while() loop. However, this proposal was rejected, because it could result in more aggressive and frequent slab shrinking even under low memory pressure when total_scan is naturally very small. This patch is a slightly modified version of Glauber's approach. Similarly to Glauber's patch, it makes shrink_slab() scan less than batch_size objects, but only if the total number of objects we want to scan (total_scan) is greater than the total number of objects available (max_pass). Since total_scan is biased as half max_pass if the current delta change is small: if (delta < max_pass / 4) total_scan = min(total_scan, max_pass / 2); this is only possible if we are scanning at high prio. That said, this patch shouldn't change the vmscan behaviour if the memory pressure is low, but if we are tight on memory, we will do our best by trying to reclaim all available objects, which sounds reasonable. [*] http://www.spinics.net/lists/cgroups/msg06913.html Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Glauber Costa <glommer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-24 06:53:22 +07:00
unsigned long nr_to_scan = min(batch_size, total_scan);
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
mm: vmscan: shrink all slab objects if tight on memory When reclaiming kmem, we currently don't scan slabs that have less than batch_size objects (see shrink_slab_node()): while (total_scan >= batch_size) { shrinkctl->nr_to_scan = batch_size; shrinker->scan_objects(shrinker, shrinkctl); total_scan -= batch_size; } If there are only a few shrinkers available, such a behavior won't cause any problems, because the batch_size is usually small, but if we have a lot of slab shrinkers, which is perfectly possible since FS shrinkers are now per-superblock, we can end up with hundreds of megabytes of practically unreclaimable kmem objects. For instance, mounting a thousand of ext2 FS images with a hundred of files in each and iterating over all the files using du(1) will result in about 200 Mb of FS caches that cannot be dropped even with the aid of the vm.drop_caches sysctl! This problem was initially pointed out by Glauber Costa [*]. Glauber proposed to fix it by making the shrink_slab() always take at least one pass, to put it simply, turning the scan loop above to a do{}while() loop. However, this proposal was rejected, because it could result in more aggressive and frequent slab shrinking even under low memory pressure when total_scan is naturally very small. This patch is a slightly modified version of Glauber's approach. Similarly to Glauber's patch, it makes shrink_slab() scan less than batch_size objects, but only if the total number of objects we want to scan (total_scan) is greater than the total number of objects available (max_pass). Since total_scan is biased as half max_pass if the current delta change is small: if (delta < max_pass / 4) total_scan = min(total_scan, max_pass / 2); this is only possible if we are scanning at high prio. That said, this patch shouldn't change the vmscan behaviour if the memory pressure is low, but if we are tight on memory, we will do our best by trying to reclaim all available objects, which sounds reasonable. [*] http://www.spinics.net/lists/cgroups/msg06913.html Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Glauber Costa <glommer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-24 06:53:22 +07:00
shrinkctl->nr_to_scan = nr_to_scan;
shrinker: Kill old ->shrink API. There are no more users of this API, so kill it dead, dead, dead and quietly bury the corpse in a shallow, unmarked grave in a dark forest deep in the hills... [glommer@openvz.org: added flowers to the grave] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Greg Thelen <gthelen@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:16 +07:00
ret = shrinker->scan_objects(shrinker, shrinkctl);
if (ret == SHRINK_STOP)
break;
freed += ret;
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
mm: vmscan: shrink all slab objects if tight on memory When reclaiming kmem, we currently don't scan slabs that have less than batch_size objects (see shrink_slab_node()): while (total_scan >= batch_size) { shrinkctl->nr_to_scan = batch_size; shrinker->scan_objects(shrinker, shrinkctl); total_scan -= batch_size; } If there are only a few shrinkers available, such a behavior won't cause any problems, because the batch_size is usually small, but if we have a lot of slab shrinkers, which is perfectly possible since FS shrinkers are now per-superblock, we can end up with hundreds of megabytes of practically unreclaimable kmem objects. For instance, mounting a thousand of ext2 FS images with a hundred of files in each and iterating over all the files using du(1) will result in about 200 Mb of FS caches that cannot be dropped even with the aid of the vm.drop_caches sysctl! This problem was initially pointed out by Glauber Costa [*]. Glauber proposed to fix it by making the shrink_slab() always take at least one pass, to put it simply, turning the scan loop above to a do{}while() loop. However, this proposal was rejected, because it could result in more aggressive and frequent slab shrinking even under low memory pressure when total_scan is naturally very small. This patch is a slightly modified version of Glauber's approach. Similarly to Glauber's patch, it makes shrink_slab() scan less than batch_size objects, but only if the total number of objects we want to scan (total_scan) is greater than the total number of objects available (max_pass). Since total_scan is biased as half max_pass if the current delta change is small: if (delta < max_pass / 4) total_scan = min(total_scan, max_pass / 2); this is only possible if we are scanning at high prio. That said, this patch shouldn't change the vmscan behaviour if the memory pressure is low, but if we are tight on memory, we will do our best by trying to reclaim all available objects, which sounds reasonable. [*] http://www.spinics.net/lists/cgroups/msg06913.html Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Glauber Costa <glommer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-24 06:53:22 +07:00
count_vm_events(SLABS_SCANNED, nr_to_scan);
total_scan -= nr_to_scan;
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
cond_resched();
}
/*
* move the unused scan count back into the shrinker in a
* manner that handles concurrent updates. If we exhausted the
* scan, there is no need to do an update.
*/
if (total_scan > 0)
new_nr = atomic_long_add_return(total_scan,
&shrinker->nr_deferred[nid]);
else
new_nr = atomic_long_read(&shrinker->nr_deferred[nid]);
trace_mm_shrink_slab_end(shrinker, nid, freed, nr, new_nr, total_scan);
vmscan: per-node deferred work The list_lru infrastructure already keeps per-node LRU lists in its node-specific list_lru_node arrays and provide us with a per-node API, and the shrinkers are properly equiped with node information. This means that we can now focus our shrinking effort in a single node, but the work that is deferred from one run to another is kept global at nr_in_batch. Work can be deferred, for instance, during direct reclaim under a GFP_NOFS allocation, where situation, all the filesystem shrinkers will be prevented from running and accumulate in nr_in_batch the amount of work they should have done, but could not. This creates an impedance problem, where upon node pressure, work deferred will accumulate and end up being flushed in other nodes. The problem we describe is particularly harmful in big machines, where many nodes can accumulate at the same time, all adding to the global counter nr_in_batch. As we accumulate more and more, we start to ask for the caches to flush even bigger numbers. The result is that the caches are depleted and do not stabilize. To achieve stable steady state behavior, we need to tackle it differently. In this patch we keep the deferred count per-node, in the new array nr_deferred[] (the name is also a bit more descriptive) and will never accumulate that to other nodes. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:18:04 +07:00
return freed;
}
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
/**
* shrink_slab - shrink slab caches
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
* @gfp_mask: allocation context
* @nid: node whose slab caches to target
* @memcg: memory cgroup whose slab caches to target
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
* @nr_scanned: pressure numerator
* @nr_eligible: pressure denominator
*
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
* Call the shrink functions to age shrinkable caches.
*
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
* @nid is passed along to shrinkers with SHRINKER_NUMA_AWARE set,
* unaware shrinkers will receive a node id of 0 instead.
*
* @memcg specifies the memory cgroup to target. If it is not NULL,
* only shrinkers with SHRINKER_MEMCG_AWARE set will be called to scan
* objects from the memory cgroup specified. Otherwise, only unaware
* shrinkers are called.
*
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
* @nr_scanned and @nr_eligible form a ratio that indicate how much of
* the available objects should be scanned. Page reclaim for example
* passes the number of pages scanned and the number of pages on the
* LRU lists that it considered on @nid, plus a bias in @nr_scanned
* when it encountered mapped pages. The ratio is further biased by
* the ->seeks setting of the shrink function, which indicates the
* cost to recreate an object relative to that of an LRU page.
*
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
* Returns the number of reclaimed slab objects.
*/
static unsigned long shrink_slab(gfp_t gfp_mask, int nid,
struct mem_cgroup *memcg,
unsigned long nr_scanned,
unsigned long nr_eligible)
{
struct shrinker *shrinker;
mm: new shrinker API The current shrinker callout API uses an a single shrinker call for multiple functions. To determine the function, a special magical value is passed in a parameter to change the behaviour. This complicates the implementation and return value specification for the different behaviours. Separate the two different behaviours into separate operations, one to return a count of freeable objects in the cache, and another to scan a certain number of objects in the cache for freeing. In defining these new operations, ensure the return values and resultant behaviours are clearly defined and documented. Modify shrink_slab() to use the new API and implement the callouts for all the existing shrinkers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@parallels.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:17:56 +07:00
unsigned long freed = 0;
if (memcg && (!memcg_kmem_enabled() || !mem_cgroup_online(memcg)))
return 0;
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
if (nr_scanned == 0)
nr_scanned = SWAP_CLUSTER_MAX;
mm: vmscan: correctly check if reclaimer should schedule during shrink_slab It has been reported on some laptops that kswapd is consuming large amounts of CPU and not being scheduled when SLUB is enabled during large amounts of file copying. It is expected that this is due to kswapd missing every cond_resched() point because; shrink_page_list() calls cond_resched() if inactive pages were isolated which in turn may not happen if all_unreclaimable is set in shrink_zones(). If for whatver reason, all_unreclaimable is set on all zones, we can miss calling cond_resched(). balance_pgdat() only calls cond_resched if the zones are not balanced. For a high-order allocation that is balanced, it checks order-0 again. During that window, order-0 might have become unbalanced so it loops again for order-0 and returns that it was reclaiming for order-0 to kswapd(). It can then find that a caller has rewoken kswapd for a high-order and re-enters balance_pgdat() without ever calling cond_resched(). shrink_slab only calls cond_resched() if we are reclaiming slab pages. If there are a large number of direct reclaimers, the shrinker_rwsem can be contended and prevent kswapd calling cond_resched(). This patch modifies the shrink_slab() case. If the semaphore is contended, the caller will still check cond_resched(). After each successful call into a shrinker, the check for cond_resched() remains in case one shrinker is particularly slow. [mgorman@suse.de: preserve call to cond_resched after each call into shrinker] Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Colin King <colin.king@canonical.com> Cc: Raghavendra D Prabhu <raghu.prabhu13@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Chris Mason <chris.mason@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> [2.6.38+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:11:11 +07:00
if (!down_read_trylock(&shrinker_rwsem)) {
mm: new shrinker API The current shrinker callout API uses an a single shrinker call for multiple functions. To determine the function, a special magical value is passed in a parameter to change the behaviour. This complicates the implementation and return value specification for the different behaviours. Separate the two different behaviours into separate operations, one to return a count of freeable objects in the cache, and another to scan a certain number of objects in the cache for freeing. In defining these new operations, ensure the return values and resultant behaviours are clearly defined and documented. Modify shrink_slab() to use the new API and implement the callouts for all the existing shrinkers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@parallels.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:17:56 +07:00
/*
* If we would return 0, our callers would understand that we
* have nothing else to shrink and give up trying. By returning
* 1 we keep it going and assume we'll be able to shrink next
* time.
*/
freed = 1;
mm: vmscan: correctly check if reclaimer should schedule during shrink_slab It has been reported on some laptops that kswapd is consuming large amounts of CPU and not being scheduled when SLUB is enabled during large amounts of file copying. It is expected that this is due to kswapd missing every cond_resched() point because; shrink_page_list() calls cond_resched() if inactive pages were isolated which in turn may not happen if all_unreclaimable is set in shrink_zones(). If for whatver reason, all_unreclaimable is set on all zones, we can miss calling cond_resched(). balance_pgdat() only calls cond_resched if the zones are not balanced. For a high-order allocation that is balanced, it checks order-0 again. During that window, order-0 might have become unbalanced so it loops again for order-0 and returns that it was reclaiming for order-0 to kswapd(). It can then find that a caller has rewoken kswapd for a high-order and re-enters balance_pgdat() without ever calling cond_resched(). shrink_slab only calls cond_resched() if we are reclaiming slab pages. If there are a large number of direct reclaimers, the shrinker_rwsem can be contended and prevent kswapd calling cond_resched(). This patch modifies the shrink_slab() case. If the semaphore is contended, the caller will still check cond_resched(). After each successful call into a shrinker, the check for cond_resched() remains in case one shrinker is particularly slow. [mgorman@suse.de: preserve call to cond_resched after each call into shrinker] Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Colin King <colin.king@canonical.com> Cc: Raghavendra D Prabhu <raghu.prabhu13@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Chris Mason <chris.mason@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> [2.6.38+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:11:11 +07:00
goto out;
}
list_for_each_entry(shrinker, &shrinker_list, list) {
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
struct shrink_control sc = {
.gfp_mask = gfp_mask,
.nid = nid,
.memcg = memcg,
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
};
/*
* If kernel memory accounting is disabled, we ignore
* SHRINKER_MEMCG_AWARE flag and call all shrinkers
* passing NULL for memcg.
*/
if (memcg_kmem_enabled() &&
!!memcg != !!(shrinker->flags & SHRINKER_MEMCG_AWARE))
continue;
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
if (!(shrinker->flags & SHRINKER_NUMA_AWARE))
sc.nid = 0;
freed += do_shrink_slab(&sc, shrinker, nr_scanned, nr_eligible);
}
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
up_read(&shrinker_rwsem);
mm: vmscan: correctly check if reclaimer should schedule during shrink_slab It has been reported on some laptops that kswapd is consuming large amounts of CPU and not being scheduled when SLUB is enabled during large amounts of file copying. It is expected that this is due to kswapd missing every cond_resched() point because; shrink_page_list() calls cond_resched() if inactive pages were isolated which in turn may not happen if all_unreclaimable is set in shrink_zones(). If for whatver reason, all_unreclaimable is set on all zones, we can miss calling cond_resched(). balance_pgdat() only calls cond_resched if the zones are not balanced. For a high-order allocation that is balanced, it checks order-0 again. During that window, order-0 might have become unbalanced so it loops again for order-0 and returns that it was reclaiming for order-0 to kswapd(). It can then find that a caller has rewoken kswapd for a high-order and re-enters balance_pgdat() without ever calling cond_resched(). shrink_slab only calls cond_resched() if we are reclaiming slab pages. If there are a large number of direct reclaimers, the shrinker_rwsem can be contended and prevent kswapd calling cond_resched(). This patch modifies the shrink_slab() case. If the semaphore is contended, the caller will still check cond_resched(). After each successful call into a shrinker, the check for cond_resched() remains in case one shrinker is particularly slow. [mgorman@suse.de: preserve call to cond_resched after each call into shrinker] Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Colin King <colin.king@canonical.com> Cc: Raghavendra D Prabhu <raghu.prabhu13@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Chris Mason <chris.mason@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> [2.6.38+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:11:11 +07:00
out:
cond_resched();
mm: new shrinker API The current shrinker callout API uses an a single shrinker call for multiple functions. To determine the function, a special magical value is passed in a parameter to change the behaviour. This complicates the implementation and return value specification for the different behaviours. Separate the two different behaviours into separate operations, one to return a count of freeable objects in the cache, and another to scan a certain number of objects in the cache for freeing. In defining these new operations, ensure the return values and resultant behaviours are clearly defined and documented. Modify shrink_slab() to use the new API and implement the callouts for all the existing shrinkers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@parallels.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 07:17:56 +07:00
return freed;
}
void drop_slab_node(int nid)
{
unsigned long freed;
do {
struct mem_cgroup *memcg = NULL;
freed = 0;
do {
freed += shrink_slab(GFP_KERNEL, nid, memcg,
1000, 1000);
} while ((memcg = mem_cgroup_iter(NULL, memcg, NULL)) != NULL);
} while (freed > 10);
}
void drop_slab(void)
{
int nid;
for_each_online_node(nid)
drop_slab_node(nid);
}
static inline int is_page_cache_freeable(struct page *page)
{
/*
* A freeable page cache page is referenced only by the caller
* that isolated the page, the page cache radix tree and
* optional buffer heads at page->private.
*/
return page_count(page) - page_has_private(page) == 2;
}
static int may_write_to_inode(struct inode *inode, struct scan_control *sc)
{
if (current->flags & PF_SWAPWRITE)
return 1;
if (!inode_write_congested(inode))
return 1;
if (inode_to_bdi(inode) == current->backing_dev_info)
return 1;
return 0;
}
/*
* We detected a synchronous write error writing a page out. Probably
* -ENOSPC. We need to propagate that into the address_space for a subsequent
* fsync(), msync() or close().
*
* The tricky part is that after writepage we cannot touch the mapping: nothing
* prevents it from being freed up. But we have a ref on the page and once
* that page is locked, the mapping is pinned.
*
* We're allowed to run sleeping lock_page() here because we know the caller has
* __GFP_FS.
*/
static void handle_write_error(struct address_space *mapping,
struct page *page, int error)
{
lock_page(page);
if (page_mapping(page) == mapping)
mapping_set_error(mapping, error);
unlock_page(page);
}
/* possible outcome of pageout() */
typedef enum {
/* failed to write page out, page is locked */
PAGE_KEEP,
/* move page to the active list, page is locked */
PAGE_ACTIVATE,
/* page has been sent to the disk successfully, page is unlocked */
PAGE_SUCCESS,
/* page is clean and locked */
PAGE_CLEAN,
} pageout_t;
/*
* pageout is called by shrink_page_list() for each dirty page.
* Calls ->writepage().
*/
static pageout_t pageout(struct page *page, struct address_space *mapping,
vmscan: narrow the scenarios in whcih lumpy reclaim uses synchrounous reclaim shrink_page_list() can decide to give up reclaiming a page under a number of conditions such as 1. trylock_page() failure 2. page is unevictable 3. zone reclaim and page is mapped 4. PageWriteback() is true 5. page is swapbacked and swap is full 6. add_to_swap() failure 7. page is dirty and gfpmask don't have GFP_IO, GFP_FS 8. page is pinned 9. IO queue is congested 10. pageout() start IO, but not finished With lumpy reclaim, failures result in entering synchronous lumpy reclaim but this can be unnecessary. In cases (2), (3), (5), (6), (7) and (8), there is no point retrying. This patch causes lumpy reclaim to abort when it is known it will fail. Case (9) is more interesting. current behavior is, 1. start shrink_page_list(async) 2. found queue_congested() 3. skip pageout write 4. still start shrink_page_list(sync) 5. wait on a lot of pages 6. again, found queue_congested() 7. give up pageout write again So, it's useless time wasting. However, just skipping page reclaim is also notgood as x86 allocating a huge page needs 512 pages for example. It can have more dirty pages than queue congestion threshold (~=128). After this patch, pageout() behaves as follows; - If order > PAGE_ALLOC_COSTLY_ORDER Ignore queue congestion always. - If order <= PAGE_ALLOC_COSTLY_ORDER skip write page and disable lumpy reclaim. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 04:21:42 +07:00
struct scan_control *sc)
{
/*
* If the page is dirty, only perform writeback if that write
* will be non-blocking. To prevent this allocation from being
* stalled by pagecache activity. But note that there may be
* stalls if we need to run get_block(). We could test
* PagePrivate for that.
*
* If this process is currently in __generic_file_write_iter() against
* this page's queue, we can perform writeback even if that
* will block.
*
* If the page is swapcache, write it back even if that would
* block, for some throttling. This happens by accident, because
* swap_backing_dev_info is bust: it doesn't reflect the
* congestion state of the swapdevs. Easy to fix, if needed.
*/
if (!is_page_cache_freeable(page))
return PAGE_KEEP;
if (!mapping) {
/*
* Some data journaling orphaned pages can have
* page->mapping == NULL while being dirty with clean buffers.
*/
if (page_has_private(page)) {
if (try_to_free_buffers(page)) {
ClearPageDirty(page);
pr_info("%s: orphaned page\n", __func__);
return PAGE_CLEAN;
}
}
return PAGE_KEEP;
}
if (mapping->a_ops->writepage == NULL)
return PAGE_ACTIVATE;
if (!may_write_to_inode(mapping->host, sc))
return PAGE_KEEP;
if (clear_page_dirty_for_io(page)) {
int res;
struct writeback_control wbc = {
.sync_mode = WB_SYNC_NONE,
.nr_to_write = SWAP_CLUSTER_MAX,
[PATCH] writeback: fix range handling When a writeback_control's `start' and `end' fields are used to indicate a one-byte-range starting at file offset zero, the required values of .start=0,.end=0 mean that the ->writepages() implementation has no way of telling that it is being asked to perform a range request. Because we're currently overloading (start == 0 && end == 0) to mean "this is not a write-a-range request". To make all this sane, the patch changes range of writeback_control. So caller does: If it is calling ->writepages() to write pages, it sets range (range_start/end or range_cyclic) always. And if range_cyclic is true, ->writepages() thinks the range is cyclic, otherwise it just uses range_start and range_end. This patch does, - Add LLONG_MAX, LLONG_MIN, ULLONG_MAX to include/linux/kernel.h -1 is usually ok for range_end (type is long long). But, if someone did, range_end += val; range_end is "val - 1" u64val = range_end >> bits; u64val is "~(0ULL)" or something, they are wrong. So, this adds LLONG_MAX to avoid nasty things, and uses LLONG_MAX for range_end. - All callers of ->writepages() sets range_start/end or range_cyclic. - Fix updates of ->writeback_index. It seems already bit strange. If it starts at 0 and ended by check of nr_to_write, this last index may reduce chance to scan end of file. So, this updates ->writeback_index only if range_cyclic is true or whole-file is scanned. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Nathan Scott <nathans@sgi.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Steven French <sfrench@us.ibm.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 16:03:26 +07:00
.range_start = 0,
.range_end = LLONG_MAX,
.for_reclaim = 1,
};
SetPageReclaim(page);
res = mapping->a_ops->writepage(page, &wbc);
if (res < 0)
handle_write_error(mapping, page, res);
if (res == AOP_WRITEPAGE_ACTIVATE) {
ClearPageReclaim(page);
return PAGE_ACTIVATE;
}
if (!PageWriteback(page)) {
/* synchronous write or broken a_ops? */
ClearPageReclaim(page);
}
trace_mm_vmscan_writepage(page);
inc_node_page_state(page, NR_VMSCAN_WRITE);
return PAGE_SUCCESS;
}
return PAGE_CLEAN;
}
/*
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 09:45:30 +07:00
* Same as remove_mapping, but if the page is removed from the mapping, it
* gets returned with a refcount of 0.
*/
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 04:47:51 +07:00
static int __remove_mapping(struct address_space *mapping, struct page *page,
bool reclaimed)
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:00:48 +07:00
{
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 04:13:16 +07:00
unsigned long flags;
BUG_ON(!PageLocked(page));
BUG_ON(mapping != page_mapping(page));
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:00:48 +07:00
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 04:13:16 +07:00
spin_lock_irqsave(&mapping->tree_lock, flags);
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:00:48 +07:00
/*
* The non racy check for a busy page.
*
* Must be careful with the order of the tests. When someone has
* a ref to the page, it may be possible that they dirty it then
* drop the reference. So if PageDirty is tested before page_count
* here, then the following race may occur:
*
* get_user_pages(&page);
* [user mapping goes away]
* write_to(page);
* !PageDirty(page) [good]
* SetPageDirty(page);
* put_page(page);
* !page_count(page) [good, discard it]
*
* [oops, our write_to data is lost]
*
* Reversing the order of the tests ensures such a situation cannot
* escape unnoticed. The smp_rmb is needed to ensure the page->flags
* load is not satisfied before that of page->_refcount.
*
* Note that if SetPageDirty is always performed via set_page_dirty,
* and thus under tree_lock, then this ordering is not required.
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:00:48 +07:00
*/
2016-03-18 04:19:26 +07:00
if (!page_ref_freeze(page, 2))
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:00:48 +07:00
goto cannot_free;
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 09:45:30 +07:00
/* note: atomic_cmpxchg in page_freeze_refs provides the smp_rmb */
if (unlikely(PageDirty(page))) {
2016-03-18 04:19:26 +07:00
page_ref_unfreeze(page, 2);
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:00:48 +07:00
goto cannot_free;
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 09:45:30 +07:00
}
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:00:48 +07:00
if (PageSwapCache(page)) {
swp_entry_t swap = { .val = page_private(page) };
mm: memcontrol: rewrite uncharge API The memcg uncharging code that is involved towards the end of a page's lifetime - truncation, reclaim, swapout, migration - is impressively complicated and fragile. Because anonymous and file pages were always charged before they had their page->mapping established, uncharges had to happen when the page type could still be known from the context; as in unmap for anonymous, page cache removal for file and shmem pages, and swap cache truncation for swap pages. However, these operations happen well before the page is actually freed, and so a lot of synchronization is necessary: - Charging, uncharging, page migration, and charge migration all need to take a per-page bit spinlock as they could race with uncharging. - Swap cache truncation happens during both swap-in and swap-out, and possibly repeatedly before the page is actually freed. This means that the memcg swapout code is called from many contexts that make no sense and it has to figure out the direction from page state to make sure memory and memory+swap are always correctly charged. - On page migration, the old page might be unmapped but then reused, so memcg code has to prevent untimely uncharging in that case. Because this code - which should be a simple charge transfer - is so special-cased, it is not reusable for replace_page_cache(). But now that charged pages always have a page->mapping, introduce mem_cgroup_uncharge(), which is called after the final put_page(), when we know for sure that nobody is looking at the page anymore. For page migration, introduce mem_cgroup_migrate(), which is called after the migration is successful and the new page is fully rmapped. Because the old page is no longer uncharged after migration, prevent double charges by decoupling the page's memcg association (PCG_USED and pc->mem_cgroup) from the page holding an actual charge. The new bits PCG_MEM and PCG_MEMSW represent the respective charges and are transferred to the new page during migration. mem_cgroup_migrate() is suitable for replace_page_cache() as well, which gets rid of mem_cgroup_replace_page_cache(). However, care needs to be taken because both the source and the target page can already be charged and on the LRU when fuse is splicing: grab the page lock on the charge moving side to prevent changing pc->mem_cgroup of a page under migration. Also, the lruvecs of both pages change as we uncharge the old and charge the new during migration, and putback may race with us, so grab the lru lock and isolate the pages iff on LRU to prevent races and ensure the pages are on the right lruvec afterward. Swap accounting is massively simplified: because the page is no longer uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry before the final put_page() in page reclaim. Finally, page_cgroup changes are now protected by whatever protection the page itself offers: anonymous pages are charged under the page table lock, whereas page cache insertions, swapin, and migration hold the page lock. Uncharging happens under full exclusion with no outstanding references. Charging and uncharging also ensure that the page is off-LRU, which serializes against charge migration. Remove the very costly page_cgroup lock and set pc->flags non-atomically. [mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable] [vdavydov@parallels.com: fix flags definition] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Tested-by: Jet Chen <jet.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:19:22 +07:00
mem_cgroup_swapout(page, swap);
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:00:48 +07:00
__delete_from_swap_cache(page);
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 04:13:16 +07:00
spin_unlock_irqrestore(&mapping->tree_lock, flags);
mm: memcontrol: rewrite uncharge API The memcg uncharging code that is involved towards the end of a page's lifetime - truncation, reclaim, swapout, migration - is impressively complicated and fragile. Because anonymous and file pages were always charged before they had their page->mapping established, uncharges had to happen when the page type could still be known from the context; as in unmap for anonymous, page cache removal for file and shmem pages, and swap cache truncation for swap pages. However, these operations happen well before the page is actually freed, and so a lot of synchronization is necessary: - Charging, uncharging, page migration, and charge migration all need to take a per-page bit spinlock as they could race with uncharging. - Swap cache truncation happens during both swap-in and swap-out, and possibly repeatedly before the page is actually freed. This means that the memcg swapout code is called from many contexts that make no sense and it has to figure out the direction from page state to make sure memory and memory+swap are always correctly charged. - On page migration, the old page might be unmapped but then reused, so memcg code has to prevent untimely uncharging in that case. Because this code - which should be a simple charge transfer - is so special-cased, it is not reusable for replace_page_cache(). But now that charged pages always have a page->mapping, introduce mem_cgroup_uncharge(), which is called after the final put_page(), when we know for sure that nobody is looking at the page anymore. For page migration, introduce mem_cgroup_migrate(), which is called after the migration is successful and the new page is fully rmapped. Because the old page is no longer uncharged after migration, prevent double charges by decoupling the page's memcg association (PCG_USED and pc->mem_cgroup) from the page holding an actual charge. The new bits PCG_MEM and PCG_MEMSW represent the respective charges and are transferred to the new page during migration. mem_cgroup_migrate() is suitable for replace_page_cache() as well, which gets rid of mem_cgroup_replace_page_cache(). However, care needs to be taken because both the source and the target page can already be charged and on the LRU when fuse is splicing: grab the page lock on the charge moving side to prevent changing pc->mem_cgroup of a page under migration. Also, the lruvecs of both pages change as we uncharge the old and charge the new during migration, and putback may race with us, so grab the lru lock and isolate the pages iff on LRU to prevent races and ensure the pages are on the right lruvec afterward. Swap accounting is massively simplified: because the page is no longer uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry before the final put_page() in page reclaim. Finally, page_cgroup changes are now protected by whatever protection the page itself offers: anonymous pages are charged under the page table lock, whereas page cache insertions, swapin, and migration hold the page lock. Uncharging happens under full exclusion with no outstanding references. Charging and uncharging also ensure that the page is off-LRU, which serializes against charge migration. Remove the very costly page_cgroup lock and set pc->flags non-atomically. [mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable] [vdavydov@parallels.com: fix flags definition] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Tested-by: Jet Chen <jet.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:19:22 +07:00
swapcache_free(swap);
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 09:45:30 +07:00
} else {
void (*freepage)(struct page *);
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 04:47:51 +07:00
void *shadow = NULL;
freepage = mapping->a_ops->freepage;
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 04:47:51 +07:00
/*
* Remember a shadow entry for reclaimed file cache in
* order to detect refaults, thus thrashing, later on.
*
* But don't store shadows in an address space that is
* already exiting. This is not just an optizimation,
* inode reclaim needs to empty out the radix tree or
* the nodes are lost. Don't plant shadows behind its
* back.
dax: support dirty DAX entries in radix tree Add support for tracking dirty DAX entries in the struct address_space radix tree. This tree is already used for dirty page writeback, and it already supports the use of exceptional (non struct page*) entries. In order to properly track dirty DAX pages we will insert new exceptional entries into the radix tree that represent dirty DAX PTE or PMD pages. These exceptional entries will also contain the writeback addresses for the PTE or PMD faults that we can use at fsync/msync time. There are currently two types of exceptional entries (shmem and shadow) that can be placed into the radix tree, and this adds a third. We rely on the fact that only one type of exceptional entry can be found in a given radix tree based on its usage. This happens for free with DAX vs shmem but we explicitly prevent shadow entries from being added to radix trees for DAX mappings. The only shadow entries that would be generated for DAX radix trees would be to track zero page mappings that were created for holes. These pages would receive minimal benefit from having shadow entries, and the choice to have only one type of exceptional entry in a given radix tree makes the logic simpler both in clear_exceptional_entry() and in the rest of DAX. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jan Kara <jack@suse.com> Cc: Jeff Layton <jlayton@poochiereds.net> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-23 06:10:40 +07:00
*
* We also don't store shadows for DAX mappings because the
* only page cache pages found in these are zero pages
* covering holes, and because we don't want to mix DAX
* exceptional entries and shadow exceptional entries in the
* same page_tree.
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 04:47:51 +07:00
*/
if (reclaimed && page_is_file_cache(page) &&
dax: support dirty DAX entries in radix tree Add support for tracking dirty DAX entries in the struct address_space radix tree. This tree is already used for dirty page writeback, and it already supports the use of exceptional (non struct page*) entries. In order to properly track dirty DAX pages we will insert new exceptional entries into the radix tree that represent dirty DAX PTE or PMD pages. These exceptional entries will also contain the writeback addresses for the PTE or PMD faults that we can use at fsync/msync time. There are currently two types of exceptional entries (shmem and shadow) that can be placed into the radix tree, and this adds a third. We rely on the fact that only one type of exceptional entry can be found in a given radix tree based on its usage. This happens for free with DAX vs shmem but we explicitly prevent shadow entries from being added to radix trees for DAX mappings. The only shadow entries that would be generated for DAX radix trees would be to track zero page mappings that were created for holes. These pages would receive minimal benefit from having shadow entries, and the choice to have only one type of exceptional entry in a given radix tree makes the logic simpler both in clear_exceptional_entry() and in the rest of DAX. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jan Kara <jack@suse.com> Cc: Jeff Layton <jlayton@poochiereds.net> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-23 06:10:40 +07:00
!mapping_exiting(mapping) && !dax_mapping(mapping))
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 04:47:51 +07:00
shadow = workingset_eviction(mapping, page);
__delete_from_page_cache(page, shadow);
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 04:13:16 +07:00
spin_unlock_irqrestore(&mapping->tree_lock, flags);
if (freepage != NULL)
freepage(page);
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:00:48 +07:00
}
return 1;
cannot_free:
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 04:13:16 +07:00
spin_unlock_irqrestore(&mapping->tree_lock, flags);
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:00:48 +07:00
return 0;
}
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 09:45:30 +07:00
/*
* Attempt to detach a locked page from its ->mapping. If it is dirty or if
* someone else has a ref on the page, abort and return 0. If it was
* successfully detached, return 1. Assumes the caller has a single ref on
* this page.
*/
int remove_mapping(struct address_space *mapping, struct page *page)
{
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 04:47:51 +07:00
if (__remove_mapping(mapping, page, false)) {
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 09:45:30 +07:00
/*
* Unfreezing the refcount with 1 rather than 2 effectively
* drops the pagecache ref for us without requiring another
* atomic operation.
*/
2016-03-18 04:19:26 +07:00
page_ref_unfreeze(page, 1);
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 09:45:30 +07:00
return 1;
}
return 0;
}
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
/**
* putback_lru_page - put previously isolated page onto appropriate LRU list
* @page: page to be put back to appropriate lru list
*
* Add previously isolated @page to appropriate LRU list.
* Page may still be unevictable for other reasons.
*
* lru_lock must not be held, interrupts must be enabled.
*/
void putback_lru_page(struct page *page)
{
mm: putback_lru_page: remove unnecessary call to page_lru_base_type() The goal of this patch series is to improve performance of munlock() of large mlocked memory areas on systems without THP. This is motivated by reported very long times of crash recovery of processes with such areas, where munlock() can take several seconds. See http://lwn.net/Articles/548108/ The work was driven by a simple benchmark (to be included in mmtests) that mmaps() e.g. 56GB with MAP_LOCKED | MAP_POPULATE and measures the time of munlock(). Profiling was performed by attaching operf --pid to the process and sending a signal to trigger the munlock() part and then notify bach the monitoring wrapper to stop operf, so that only munlock() appears in the profile. The profiles have shown that CPU time is spent mostly by atomic operations and repeated locking per single pages. This series aims to reduce both, starting from simpler to more complex changes. Patch 1 performs a simple cleanup in putback_lru_page() so that page lru base type is not determined without being actually needed. Patch 2 removes an unnecessary call to lru_add_drain() which drains the per-cpu pagevec after each munlocked page is put there. Patch 3 changes munlock_vma_range() to use an on-stack pagevec for isolating multiple non-THP pages under a single lru_lock instead of locking and processing each page separately. Patch 4 changes the NR_MLOCK accounting to be called only once per the pvec introduced by previous patch. Patch 5 uses the introduced pagevec to batch also the work of putback_lru_page when possible, bypassing the per-cpu pvec and associated overhead. Patch 6 removes a redundant get_page/put_page pair which saves costly atomic operations. Patch 7 avoids calling follow_page_mask() on each individual page, and obtains multiple page references under a single page table lock where possible. Measurements were made using 3.11-rc3 as a baseline. The first set of measurements shows the possibly ideal conditions where batching should help the most. All memory is allocated from a single NUMA node and THP is disabled. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 3.38 ( 0.00%) 3.39 ( -0.13%) 3.00 ( 11.33%) 2.70 ( 20.20%) 2.67 ( 21.11%) 2.37 ( 29.88%) 2.20 ( 34.91%) 1.91 ( 43.59%) Elapsed mean 3.39 ( 0.00%) 3.40 ( -0.23%) 3.01 ( 11.33%) 2.70 ( 20.26%) 2.67 ( 21.21%) 2.38 ( 29.88%) 2.21 ( 34.93%) 1.92 ( 43.46%) Elapsed stddev 0.01 ( 0.00%) 0.01 (-43.09%) 0.01 ( 15.42%) 0.01 ( 23.42%) 0.00 ( 89.78%) 0.01 ( -7.15%) 0.00 ( 76.69%) 0.02 (-91.77%) Elapsed max 3.41 ( 0.00%) 3.43 ( -0.52%) 3.03 ( 11.29%) 2.72 ( 20.16%) 2.67 ( 21.63%) 2.40 ( 29.50%) 2.21 ( 35.21%) 1.96 ( 42.39%) Elapsed range 0.03 ( 0.00%) 0.04 (-51.16%) 0.02 ( 6.27%) 0.02 ( 14.67%) 0.00 ( 88.90%) 0.03 (-19.18%) 0.01 ( 73.70%) 0.06 (-113.35% The second set of measurements simulates the worst possible conditions for batching by using numactl --interleave, so that there is in fact only one page per pagevec. Even in this case the series seems to improve performance thanks to reduced atomic operations and removal of lru_add_drain(). timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 4.00 ( 0.00%) 4.04 ( -0.93%) 3.87 ( 3.37%) 3.72 ( 6.94%) 3.81 ( 4.72%) 3.69 ( 7.82%) 3.64 ( 8.92%) 3.41 ( 14.81%) Elapsed mean 4.17 ( 0.00%) 4.15 ( 0.51%) 4.03 ( 3.49%) 3.89 ( 6.84%) 3.86 ( 7.48%) 3.89 ( 6.69%) 3.70 ( 11.27%) 3.48 ( 16.59%) Elapsed stddev 0.16 ( 0.00%) 0.08 ( 50.76%) 0.10 ( 41.58%) 0.16 ( 4.59%) 0.05 ( 72.38%) 0.19 (-12.91%) 0.05 ( 68.09%) 0.06 ( 66.03%) Elapsed max 4.34 ( 0.00%) 4.32 ( 0.56%) 4.19 ( 3.62%) 4.12 ( 5.15%) 3.91 ( 9.88%) 4.12 ( 5.25%) 3.80 ( 12.58%) 3.56 ( 18.08%) Elapsed range 0.34 ( 0.00%) 0.28 ( 17.91%) 0.32 ( 6.45%) 0.40 (-15.73%) 0.10 ( 70.06%) 0.43 (-24.84%) 0.15 ( 55.32%) 0.15 ( 56.16%) For completeness, a third set of measurements shows the situation where THP is enabled and allocations are again done on a single NUMA node. Here munlock() is already very fast thanks to huge pages, and this series does not compromise that performance. It seems that the removal of call to lru_add_drain() still helps a bit. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 0.01 ( 0.00%) 0.01 ( -0.11%) 0.01 ( 6.59%) 0.01 ( 5.41%) 0.01 ( 5.45%) 0.01 ( 5.03%) 0.01 ( 6.08%) 0.01 ( 5.20%) Elapsed mean 0.01 ( 0.00%) 0.01 ( -0.27%) 0.01 ( 6.39%) 0.01 ( 5.30%) 0.01 ( 5.32%) 0.01 ( 5.03%) 0.01 ( 5.97%) 0.01 ( 5.22%) Elapsed stddev 0.00 ( 0.00%) 0.00 ( -9.59%) 0.00 ( 10.77%) 0.00 ( 3.24%) 0.00 ( 24.42%) 0.00 ( 31.86%) 0.00 ( -7.46%) 0.00 ( 6.11%) Elapsed max 0.01 ( 0.00%) 0.01 ( -0.01%) 0.01 ( 6.83%) 0.01 ( 5.42%) 0.01 ( 5.79%) 0.01 ( 5.53%) 0.01 ( 6.08%) 0.01 ( 5.26%) Elapsed range 0.00 ( 0.00%) 0.00 ( 7.30%) 0.00 ( 24.38%) 0.00 ( 6.10%) 0.00 ( 30.79%) 0.00 ( 42.52%) 0.00 ( 6.11%) 0.00 ( 10.07%) This patch (of 7): In putback_lru_page() since commit c53954a092 (""mm: remove lru parameter from __lru_cache_add and lru_cache_add_lru") it is no longer needed to determine lru list via page_lru_base_type(). This patch replaces it with simple flag is_unevictable which says that the page was put on the inevictable list. This is the only information that matters in subsequent tests. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Jörn Engel <joern@logfs.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 04:22:26 +07:00
bool is_unevictable;
int was_unevictable = PageUnevictable(page);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
VM_BUG_ON_PAGE(PageLRU(page), page);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
redo:
ClearPageUnevictable(page);
if (page_evictable(page)) {
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
/*
* For evictable pages, we can use the cache.
* In event of a race, worst case is we end up with an
* unevictable page on [in]active list.
* We know how to handle that.
*/
mm: putback_lru_page: remove unnecessary call to page_lru_base_type() The goal of this patch series is to improve performance of munlock() of large mlocked memory areas on systems without THP. This is motivated by reported very long times of crash recovery of processes with such areas, where munlock() can take several seconds. See http://lwn.net/Articles/548108/ The work was driven by a simple benchmark (to be included in mmtests) that mmaps() e.g. 56GB with MAP_LOCKED | MAP_POPULATE and measures the time of munlock(). Profiling was performed by attaching operf --pid to the process and sending a signal to trigger the munlock() part and then notify bach the monitoring wrapper to stop operf, so that only munlock() appears in the profile. The profiles have shown that CPU time is spent mostly by atomic operations and repeated locking per single pages. This series aims to reduce both, starting from simpler to more complex changes. Patch 1 performs a simple cleanup in putback_lru_page() so that page lru base type is not determined without being actually needed. Patch 2 removes an unnecessary call to lru_add_drain() which drains the per-cpu pagevec after each munlocked page is put there. Patch 3 changes munlock_vma_range() to use an on-stack pagevec for isolating multiple non-THP pages under a single lru_lock instead of locking and processing each page separately. Patch 4 changes the NR_MLOCK accounting to be called only once per the pvec introduced by previous patch. Patch 5 uses the introduced pagevec to batch also the work of putback_lru_page when possible, bypassing the per-cpu pvec and associated overhead. Patch 6 removes a redundant get_page/put_page pair which saves costly atomic operations. Patch 7 avoids calling follow_page_mask() on each individual page, and obtains multiple page references under a single page table lock where possible. Measurements were made using 3.11-rc3 as a baseline. The first set of measurements shows the possibly ideal conditions where batching should help the most. All memory is allocated from a single NUMA node and THP is disabled. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 3.38 ( 0.00%) 3.39 ( -0.13%) 3.00 ( 11.33%) 2.70 ( 20.20%) 2.67 ( 21.11%) 2.37 ( 29.88%) 2.20 ( 34.91%) 1.91 ( 43.59%) Elapsed mean 3.39 ( 0.00%) 3.40 ( -0.23%) 3.01 ( 11.33%) 2.70 ( 20.26%) 2.67 ( 21.21%) 2.38 ( 29.88%) 2.21 ( 34.93%) 1.92 ( 43.46%) Elapsed stddev 0.01 ( 0.00%) 0.01 (-43.09%) 0.01 ( 15.42%) 0.01 ( 23.42%) 0.00 ( 89.78%) 0.01 ( -7.15%) 0.00 ( 76.69%) 0.02 (-91.77%) Elapsed max 3.41 ( 0.00%) 3.43 ( -0.52%) 3.03 ( 11.29%) 2.72 ( 20.16%) 2.67 ( 21.63%) 2.40 ( 29.50%) 2.21 ( 35.21%) 1.96 ( 42.39%) Elapsed range 0.03 ( 0.00%) 0.04 (-51.16%) 0.02 ( 6.27%) 0.02 ( 14.67%) 0.00 ( 88.90%) 0.03 (-19.18%) 0.01 ( 73.70%) 0.06 (-113.35% The second set of measurements simulates the worst possible conditions for batching by using numactl --interleave, so that there is in fact only one page per pagevec. Even in this case the series seems to improve performance thanks to reduced atomic operations and removal of lru_add_drain(). timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 4.00 ( 0.00%) 4.04 ( -0.93%) 3.87 ( 3.37%) 3.72 ( 6.94%) 3.81 ( 4.72%) 3.69 ( 7.82%) 3.64 ( 8.92%) 3.41 ( 14.81%) Elapsed mean 4.17 ( 0.00%) 4.15 ( 0.51%) 4.03 ( 3.49%) 3.89 ( 6.84%) 3.86 ( 7.48%) 3.89 ( 6.69%) 3.70 ( 11.27%) 3.48 ( 16.59%) Elapsed stddev 0.16 ( 0.00%) 0.08 ( 50.76%) 0.10 ( 41.58%) 0.16 ( 4.59%) 0.05 ( 72.38%) 0.19 (-12.91%) 0.05 ( 68.09%) 0.06 ( 66.03%) Elapsed max 4.34 ( 0.00%) 4.32 ( 0.56%) 4.19 ( 3.62%) 4.12 ( 5.15%) 3.91 ( 9.88%) 4.12 ( 5.25%) 3.80 ( 12.58%) 3.56 ( 18.08%) Elapsed range 0.34 ( 0.00%) 0.28 ( 17.91%) 0.32 ( 6.45%) 0.40 (-15.73%) 0.10 ( 70.06%) 0.43 (-24.84%) 0.15 ( 55.32%) 0.15 ( 56.16%) For completeness, a third set of measurements shows the situation where THP is enabled and allocations are again done on a single NUMA node. Here munlock() is already very fast thanks to huge pages, and this series does not compromise that performance. It seems that the removal of call to lru_add_drain() still helps a bit. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 0.01 ( 0.00%) 0.01 ( -0.11%) 0.01 ( 6.59%) 0.01 ( 5.41%) 0.01 ( 5.45%) 0.01 ( 5.03%) 0.01 ( 6.08%) 0.01 ( 5.20%) Elapsed mean 0.01 ( 0.00%) 0.01 ( -0.27%) 0.01 ( 6.39%) 0.01 ( 5.30%) 0.01 ( 5.32%) 0.01 ( 5.03%) 0.01 ( 5.97%) 0.01 ( 5.22%) Elapsed stddev 0.00 ( 0.00%) 0.00 ( -9.59%) 0.00 ( 10.77%) 0.00 ( 3.24%) 0.00 ( 24.42%) 0.00 ( 31.86%) 0.00 ( -7.46%) 0.00 ( 6.11%) Elapsed max 0.01 ( 0.00%) 0.01 ( -0.01%) 0.01 ( 6.83%) 0.01 ( 5.42%) 0.01 ( 5.79%) 0.01 ( 5.53%) 0.01 ( 6.08%) 0.01 ( 5.26%) Elapsed range 0.00 ( 0.00%) 0.00 ( 7.30%) 0.00 ( 24.38%) 0.00 ( 6.10%) 0.00 ( 30.79%) 0.00 ( 42.52%) 0.00 ( 6.11%) 0.00 ( 10.07%) This patch (of 7): In putback_lru_page() since commit c53954a092 (""mm: remove lru parameter from __lru_cache_add and lru_cache_add_lru") it is no longer needed to determine lru list via page_lru_base_type(). This patch replaces it with simple flag is_unevictable which says that the page was put on the inevictable list. This is the only information that matters in subsequent tests. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Jörn Engel <joern@logfs.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 04:22:26 +07:00
is_unevictable = false;
lru_cache_add(page);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
} else {
/*
* Put unevictable pages directly on zone's unevictable
* list.
*/
mm: putback_lru_page: remove unnecessary call to page_lru_base_type() The goal of this patch series is to improve performance of munlock() of large mlocked memory areas on systems without THP. This is motivated by reported very long times of crash recovery of processes with such areas, where munlock() can take several seconds. See http://lwn.net/Articles/548108/ The work was driven by a simple benchmark (to be included in mmtests) that mmaps() e.g. 56GB with MAP_LOCKED | MAP_POPULATE and measures the time of munlock(). Profiling was performed by attaching operf --pid to the process and sending a signal to trigger the munlock() part and then notify bach the monitoring wrapper to stop operf, so that only munlock() appears in the profile. The profiles have shown that CPU time is spent mostly by atomic operations and repeated locking per single pages. This series aims to reduce both, starting from simpler to more complex changes. Patch 1 performs a simple cleanup in putback_lru_page() so that page lru base type is not determined without being actually needed. Patch 2 removes an unnecessary call to lru_add_drain() which drains the per-cpu pagevec after each munlocked page is put there. Patch 3 changes munlock_vma_range() to use an on-stack pagevec for isolating multiple non-THP pages under a single lru_lock instead of locking and processing each page separately. Patch 4 changes the NR_MLOCK accounting to be called only once per the pvec introduced by previous patch. Patch 5 uses the introduced pagevec to batch also the work of putback_lru_page when possible, bypassing the per-cpu pvec and associated overhead. Patch 6 removes a redundant get_page/put_page pair which saves costly atomic operations. Patch 7 avoids calling follow_page_mask() on each individual page, and obtains multiple page references under a single page table lock where possible. Measurements were made using 3.11-rc3 as a baseline. The first set of measurements shows the possibly ideal conditions where batching should help the most. All memory is allocated from a single NUMA node and THP is disabled. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 3.38 ( 0.00%) 3.39 ( -0.13%) 3.00 ( 11.33%) 2.70 ( 20.20%) 2.67 ( 21.11%) 2.37 ( 29.88%) 2.20 ( 34.91%) 1.91 ( 43.59%) Elapsed mean 3.39 ( 0.00%) 3.40 ( -0.23%) 3.01 ( 11.33%) 2.70 ( 20.26%) 2.67 ( 21.21%) 2.38 ( 29.88%) 2.21 ( 34.93%) 1.92 ( 43.46%) Elapsed stddev 0.01 ( 0.00%) 0.01 (-43.09%) 0.01 ( 15.42%) 0.01 ( 23.42%) 0.00 ( 89.78%) 0.01 ( -7.15%) 0.00 ( 76.69%) 0.02 (-91.77%) Elapsed max 3.41 ( 0.00%) 3.43 ( -0.52%) 3.03 ( 11.29%) 2.72 ( 20.16%) 2.67 ( 21.63%) 2.40 ( 29.50%) 2.21 ( 35.21%) 1.96 ( 42.39%) Elapsed range 0.03 ( 0.00%) 0.04 (-51.16%) 0.02 ( 6.27%) 0.02 ( 14.67%) 0.00 ( 88.90%) 0.03 (-19.18%) 0.01 ( 73.70%) 0.06 (-113.35% The second set of measurements simulates the worst possible conditions for batching by using numactl --interleave, so that there is in fact only one page per pagevec. Even in this case the series seems to improve performance thanks to reduced atomic operations and removal of lru_add_drain(). timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 4.00 ( 0.00%) 4.04 ( -0.93%) 3.87 ( 3.37%) 3.72 ( 6.94%) 3.81 ( 4.72%) 3.69 ( 7.82%) 3.64 ( 8.92%) 3.41 ( 14.81%) Elapsed mean 4.17 ( 0.00%) 4.15 ( 0.51%) 4.03 ( 3.49%) 3.89 ( 6.84%) 3.86 ( 7.48%) 3.89 ( 6.69%) 3.70 ( 11.27%) 3.48 ( 16.59%) Elapsed stddev 0.16 ( 0.00%) 0.08 ( 50.76%) 0.10 ( 41.58%) 0.16 ( 4.59%) 0.05 ( 72.38%) 0.19 (-12.91%) 0.05 ( 68.09%) 0.06 ( 66.03%) Elapsed max 4.34 ( 0.00%) 4.32 ( 0.56%) 4.19 ( 3.62%) 4.12 ( 5.15%) 3.91 ( 9.88%) 4.12 ( 5.25%) 3.80 ( 12.58%) 3.56 ( 18.08%) Elapsed range 0.34 ( 0.00%) 0.28 ( 17.91%) 0.32 ( 6.45%) 0.40 (-15.73%) 0.10 ( 70.06%) 0.43 (-24.84%) 0.15 ( 55.32%) 0.15 ( 56.16%) For completeness, a third set of measurements shows the situation where THP is enabled and allocations are again done on a single NUMA node. Here munlock() is already very fast thanks to huge pages, and this series does not compromise that performance. It seems that the removal of call to lru_add_drain() still helps a bit. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 0.01 ( 0.00%) 0.01 ( -0.11%) 0.01 ( 6.59%) 0.01 ( 5.41%) 0.01 ( 5.45%) 0.01 ( 5.03%) 0.01 ( 6.08%) 0.01 ( 5.20%) Elapsed mean 0.01 ( 0.00%) 0.01 ( -0.27%) 0.01 ( 6.39%) 0.01 ( 5.30%) 0.01 ( 5.32%) 0.01 ( 5.03%) 0.01 ( 5.97%) 0.01 ( 5.22%) Elapsed stddev 0.00 ( 0.00%) 0.00 ( -9.59%) 0.00 ( 10.77%) 0.00 ( 3.24%) 0.00 ( 24.42%) 0.00 ( 31.86%) 0.00 ( -7.46%) 0.00 ( 6.11%) Elapsed max 0.01 ( 0.00%) 0.01 ( -0.01%) 0.01 ( 6.83%) 0.01 ( 5.42%) 0.01 ( 5.79%) 0.01 ( 5.53%) 0.01 ( 6.08%) 0.01 ( 5.26%) Elapsed range 0.00 ( 0.00%) 0.00 ( 7.30%) 0.00 ( 24.38%) 0.00 ( 6.10%) 0.00 ( 30.79%) 0.00 ( 42.52%) 0.00 ( 6.11%) 0.00 ( 10.07%) This patch (of 7): In putback_lru_page() since commit c53954a092 (""mm: remove lru parameter from __lru_cache_add and lru_cache_add_lru") it is no longer needed to determine lru list via page_lru_base_type(). This patch replaces it with simple flag is_unevictable which says that the page was put on the inevictable list. This is the only information that matters in subsequent tests. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Jörn Engel <joern@logfs.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 04:22:26 +07:00
is_unevictable = true;
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
add_page_to_unevictable_list(page);
vmscan: order evictable rescue in LRU putback Isolators putting a page back to the LRU do not hold the page lock, and if the page is mlocked, another thread might munlock it concurrently. Expecting this, the putback code re-checks the evictability of a page when it just moved it to the unevictable list in order to correct its decision. The problem, however, is that ordering is not garuanteed between setting PG_lru when moving the page to the list and checking PG_mlocked afterwards: #0: #1 spin_lock() if (TestClearPageMlocked()) if (PageLRU()) move to evictable list SetPageLRU() spin_unlock() if (!PageMlocked()) move to evictable list The PageMlocked() check may get reordered before SetPageLRU() in #0, resulting in #0 not moving the still mlocked page, and in #1 failing to isolate and move the page as well. The page is now stranded on the unevictable list. The race condition is very unlikely. The consequence currently is one page falling off the reclaim grid and eventually getting freed with PG_unevictable set, which triggers a warning in the page allocator. TestClearPageMlocked() in #1 already provides full memory barrier semantics. This patch adds an explicit full barrier to force ordering between SetPageLRU() and PageMlocked() so that either one of the competitors rescues the page. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-27 06:50:00 +07:00
/*
* When racing with an mlock or AS_UNEVICTABLE clearing
* (page is unlocked) make sure that if the other thread
* does not observe our setting of PG_lru and fails
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
* isolation/check_move_unevictable_pages,
* we see PG_mlocked/AS_UNEVICTABLE cleared below and move
vmscan: order evictable rescue in LRU putback Isolators putting a page back to the LRU do not hold the page lock, and if the page is mlocked, another thread might munlock it concurrently. Expecting this, the putback code re-checks the evictability of a page when it just moved it to the unevictable list in order to correct its decision. The problem, however, is that ordering is not garuanteed between setting PG_lru when moving the page to the list and checking PG_mlocked afterwards: #0: #1 spin_lock() if (TestClearPageMlocked()) if (PageLRU()) move to evictable list SetPageLRU() spin_unlock() if (!PageMlocked()) move to evictable list The PageMlocked() check may get reordered before SetPageLRU() in #0, resulting in #0 not moving the still mlocked page, and in #1 failing to isolate and move the page as well. The page is now stranded on the unevictable list. The race condition is very unlikely. The consequence currently is one page falling off the reclaim grid and eventually getting freed with PG_unevictable set, which triggers a warning in the page allocator. TestClearPageMlocked() in #1 already provides full memory barrier semantics. This patch adds an explicit full barrier to force ordering between SetPageLRU() and PageMlocked() so that either one of the competitors rescues the page. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-27 06:50:00 +07:00
* the page back to the evictable list.
*
* The other side is TestClearPageMlocked() or shmem_lock().
vmscan: order evictable rescue in LRU putback Isolators putting a page back to the LRU do not hold the page lock, and if the page is mlocked, another thread might munlock it concurrently. Expecting this, the putback code re-checks the evictability of a page when it just moved it to the unevictable list in order to correct its decision. The problem, however, is that ordering is not garuanteed between setting PG_lru when moving the page to the list and checking PG_mlocked afterwards: #0: #1 spin_lock() if (TestClearPageMlocked()) if (PageLRU()) move to evictable list SetPageLRU() spin_unlock() if (!PageMlocked()) move to evictable list The PageMlocked() check may get reordered before SetPageLRU() in #0, resulting in #0 not moving the still mlocked page, and in #1 failing to isolate and move the page as well. The page is now stranded on the unevictable list. The race condition is very unlikely. The consequence currently is one page falling off the reclaim grid and eventually getting freed with PG_unevictable set, which triggers a warning in the page allocator. TestClearPageMlocked() in #1 already provides full memory barrier semantics. This patch adds an explicit full barrier to force ordering between SetPageLRU() and PageMlocked() so that either one of the competitors rescues the page. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-27 06:50:00 +07:00
*/
smp_mb();
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
}
/*
* page's status can change while we move it among lru. If an evictable
* page is on unevictable list, it never be freed. To avoid that,
* check after we added it to the list, again.
*/
mm: putback_lru_page: remove unnecessary call to page_lru_base_type() The goal of this patch series is to improve performance of munlock() of large mlocked memory areas on systems without THP. This is motivated by reported very long times of crash recovery of processes with such areas, where munlock() can take several seconds. See http://lwn.net/Articles/548108/ The work was driven by a simple benchmark (to be included in mmtests) that mmaps() e.g. 56GB with MAP_LOCKED | MAP_POPULATE and measures the time of munlock(). Profiling was performed by attaching operf --pid to the process and sending a signal to trigger the munlock() part and then notify bach the monitoring wrapper to stop operf, so that only munlock() appears in the profile. The profiles have shown that CPU time is spent mostly by atomic operations and repeated locking per single pages. This series aims to reduce both, starting from simpler to more complex changes. Patch 1 performs a simple cleanup in putback_lru_page() so that page lru base type is not determined without being actually needed. Patch 2 removes an unnecessary call to lru_add_drain() which drains the per-cpu pagevec after each munlocked page is put there. Patch 3 changes munlock_vma_range() to use an on-stack pagevec for isolating multiple non-THP pages under a single lru_lock instead of locking and processing each page separately. Patch 4 changes the NR_MLOCK accounting to be called only once per the pvec introduced by previous patch. Patch 5 uses the introduced pagevec to batch also the work of putback_lru_page when possible, bypassing the per-cpu pvec and associated overhead. Patch 6 removes a redundant get_page/put_page pair which saves costly atomic operations. Patch 7 avoids calling follow_page_mask() on each individual page, and obtains multiple page references under a single page table lock where possible. Measurements were made using 3.11-rc3 as a baseline. The first set of measurements shows the possibly ideal conditions where batching should help the most. All memory is allocated from a single NUMA node and THP is disabled. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 3.38 ( 0.00%) 3.39 ( -0.13%) 3.00 ( 11.33%) 2.70 ( 20.20%) 2.67 ( 21.11%) 2.37 ( 29.88%) 2.20 ( 34.91%) 1.91 ( 43.59%) Elapsed mean 3.39 ( 0.00%) 3.40 ( -0.23%) 3.01 ( 11.33%) 2.70 ( 20.26%) 2.67 ( 21.21%) 2.38 ( 29.88%) 2.21 ( 34.93%) 1.92 ( 43.46%) Elapsed stddev 0.01 ( 0.00%) 0.01 (-43.09%) 0.01 ( 15.42%) 0.01 ( 23.42%) 0.00 ( 89.78%) 0.01 ( -7.15%) 0.00 ( 76.69%) 0.02 (-91.77%) Elapsed max 3.41 ( 0.00%) 3.43 ( -0.52%) 3.03 ( 11.29%) 2.72 ( 20.16%) 2.67 ( 21.63%) 2.40 ( 29.50%) 2.21 ( 35.21%) 1.96 ( 42.39%) Elapsed range 0.03 ( 0.00%) 0.04 (-51.16%) 0.02 ( 6.27%) 0.02 ( 14.67%) 0.00 ( 88.90%) 0.03 (-19.18%) 0.01 ( 73.70%) 0.06 (-113.35% The second set of measurements simulates the worst possible conditions for batching by using numactl --interleave, so that there is in fact only one page per pagevec. Even in this case the series seems to improve performance thanks to reduced atomic operations and removal of lru_add_drain(). timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 4.00 ( 0.00%) 4.04 ( -0.93%) 3.87 ( 3.37%) 3.72 ( 6.94%) 3.81 ( 4.72%) 3.69 ( 7.82%) 3.64 ( 8.92%) 3.41 ( 14.81%) Elapsed mean 4.17 ( 0.00%) 4.15 ( 0.51%) 4.03 ( 3.49%) 3.89 ( 6.84%) 3.86 ( 7.48%) 3.89 ( 6.69%) 3.70 ( 11.27%) 3.48 ( 16.59%) Elapsed stddev 0.16 ( 0.00%) 0.08 ( 50.76%) 0.10 ( 41.58%) 0.16 ( 4.59%) 0.05 ( 72.38%) 0.19 (-12.91%) 0.05 ( 68.09%) 0.06 ( 66.03%) Elapsed max 4.34 ( 0.00%) 4.32 ( 0.56%) 4.19 ( 3.62%) 4.12 ( 5.15%) 3.91 ( 9.88%) 4.12 ( 5.25%) 3.80 ( 12.58%) 3.56 ( 18.08%) Elapsed range 0.34 ( 0.00%) 0.28 ( 17.91%) 0.32 ( 6.45%) 0.40 (-15.73%) 0.10 ( 70.06%) 0.43 (-24.84%) 0.15 ( 55.32%) 0.15 ( 56.16%) For completeness, a third set of measurements shows the situation where THP is enabled and allocations are again done on a single NUMA node. Here munlock() is already very fast thanks to huge pages, and this series does not compromise that performance. It seems that the removal of call to lru_add_drain() still helps a bit. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 0.01 ( 0.00%) 0.01 ( -0.11%) 0.01 ( 6.59%) 0.01 ( 5.41%) 0.01 ( 5.45%) 0.01 ( 5.03%) 0.01 ( 6.08%) 0.01 ( 5.20%) Elapsed mean 0.01 ( 0.00%) 0.01 ( -0.27%) 0.01 ( 6.39%) 0.01 ( 5.30%) 0.01 ( 5.32%) 0.01 ( 5.03%) 0.01 ( 5.97%) 0.01 ( 5.22%) Elapsed stddev 0.00 ( 0.00%) 0.00 ( -9.59%) 0.00 ( 10.77%) 0.00 ( 3.24%) 0.00 ( 24.42%) 0.00 ( 31.86%) 0.00 ( -7.46%) 0.00 ( 6.11%) Elapsed max 0.01 ( 0.00%) 0.01 ( -0.01%) 0.01 ( 6.83%) 0.01 ( 5.42%) 0.01 ( 5.79%) 0.01 ( 5.53%) 0.01 ( 6.08%) 0.01 ( 5.26%) Elapsed range 0.00 ( 0.00%) 0.00 ( 7.30%) 0.00 ( 24.38%) 0.00 ( 6.10%) 0.00 ( 30.79%) 0.00 ( 42.52%) 0.00 ( 6.11%) 0.00 ( 10.07%) This patch (of 7): In putback_lru_page() since commit c53954a092 (""mm: remove lru parameter from __lru_cache_add and lru_cache_add_lru") it is no longer needed to determine lru list via page_lru_base_type(). This patch replaces it with simple flag is_unevictable which says that the page was put on the inevictable list. This is the only information that matters in subsequent tests. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Jörn Engel <joern@logfs.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 04:22:26 +07:00
if (is_unevictable && page_evictable(page)) {
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
if (!isolate_lru_page(page)) {
put_page(page);
goto redo;
}
/* This means someone else dropped this page from LRU
* So, it will be freed or putback to LRU again. There is
* nothing to do here.
*/
}
mm: putback_lru_page: remove unnecessary call to page_lru_base_type() The goal of this patch series is to improve performance of munlock() of large mlocked memory areas on systems without THP. This is motivated by reported very long times of crash recovery of processes with such areas, where munlock() can take several seconds. See http://lwn.net/Articles/548108/ The work was driven by a simple benchmark (to be included in mmtests) that mmaps() e.g. 56GB with MAP_LOCKED | MAP_POPULATE and measures the time of munlock(). Profiling was performed by attaching operf --pid to the process and sending a signal to trigger the munlock() part and then notify bach the monitoring wrapper to stop operf, so that only munlock() appears in the profile. The profiles have shown that CPU time is spent mostly by atomic operations and repeated locking per single pages. This series aims to reduce both, starting from simpler to more complex changes. Patch 1 performs a simple cleanup in putback_lru_page() so that page lru base type is not determined without being actually needed. Patch 2 removes an unnecessary call to lru_add_drain() which drains the per-cpu pagevec after each munlocked page is put there. Patch 3 changes munlock_vma_range() to use an on-stack pagevec for isolating multiple non-THP pages under a single lru_lock instead of locking and processing each page separately. Patch 4 changes the NR_MLOCK accounting to be called only once per the pvec introduced by previous patch. Patch 5 uses the introduced pagevec to batch also the work of putback_lru_page when possible, bypassing the per-cpu pvec and associated overhead. Patch 6 removes a redundant get_page/put_page pair which saves costly atomic operations. Patch 7 avoids calling follow_page_mask() on each individual page, and obtains multiple page references under a single page table lock where possible. Measurements were made using 3.11-rc3 as a baseline. The first set of measurements shows the possibly ideal conditions where batching should help the most. All memory is allocated from a single NUMA node and THP is disabled. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 3.38 ( 0.00%) 3.39 ( -0.13%) 3.00 ( 11.33%) 2.70 ( 20.20%) 2.67 ( 21.11%) 2.37 ( 29.88%) 2.20 ( 34.91%) 1.91 ( 43.59%) Elapsed mean 3.39 ( 0.00%) 3.40 ( -0.23%) 3.01 ( 11.33%) 2.70 ( 20.26%) 2.67 ( 21.21%) 2.38 ( 29.88%) 2.21 ( 34.93%) 1.92 ( 43.46%) Elapsed stddev 0.01 ( 0.00%) 0.01 (-43.09%) 0.01 ( 15.42%) 0.01 ( 23.42%) 0.00 ( 89.78%) 0.01 ( -7.15%) 0.00 ( 76.69%) 0.02 (-91.77%) Elapsed max 3.41 ( 0.00%) 3.43 ( -0.52%) 3.03 ( 11.29%) 2.72 ( 20.16%) 2.67 ( 21.63%) 2.40 ( 29.50%) 2.21 ( 35.21%) 1.96 ( 42.39%) Elapsed range 0.03 ( 0.00%) 0.04 (-51.16%) 0.02 ( 6.27%) 0.02 ( 14.67%) 0.00 ( 88.90%) 0.03 (-19.18%) 0.01 ( 73.70%) 0.06 (-113.35% The second set of measurements simulates the worst possible conditions for batching by using numactl --interleave, so that there is in fact only one page per pagevec. Even in this case the series seems to improve performance thanks to reduced atomic operations and removal of lru_add_drain(). timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 4.00 ( 0.00%) 4.04 ( -0.93%) 3.87 ( 3.37%) 3.72 ( 6.94%) 3.81 ( 4.72%) 3.69 ( 7.82%) 3.64 ( 8.92%) 3.41 ( 14.81%) Elapsed mean 4.17 ( 0.00%) 4.15 ( 0.51%) 4.03 ( 3.49%) 3.89 ( 6.84%) 3.86 ( 7.48%) 3.89 ( 6.69%) 3.70 ( 11.27%) 3.48 ( 16.59%) Elapsed stddev 0.16 ( 0.00%) 0.08 ( 50.76%) 0.10 ( 41.58%) 0.16 ( 4.59%) 0.05 ( 72.38%) 0.19 (-12.91%) 0.05 ( 68.09%) 0.06 ( 66.03%) Elapsed max 4.34 ( 0.00%) 4.32 ( 0.56%) 4.19 ( 3.62%) 4.12 ( 5.15%) 3.91 ( 9.88%) 4.12 ( 5.25%) 3.80 ( 12.58%) 3.56 ( 18.08%) Elapsed range 0.34 ( 0.00%) 0.28 ( 17.91%) 0.32 ( 6.45%) 0.40 (-15.73%) 0.10 ( 70.06%) 0.43 (-24.84%) 0.15 ( 55.32%) 0.15 ( 56.16%) For completeness, a third set of measurements shows the situation where THP is enabled and allocations are again done on a single NUMA node. Here munlock() is already very fast thanks to huge pages, and this series does not compromise that performance. It seems that the removal of call to lru_add_drain() still helps a bit. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 0.01 ( 0.00%) 0.01 ( -0.11%) 0.01 ( 6.59%) 0.01 ( 5.41%) 0.01 ( 5.45%) 0.01 ( 5.03%) 0.01 ( 6.08%) 0.01 ( 5.20%) Elapsed mean 0.01 ( 0.00%) 0.01 ( -0.27%) 0.01 ( 6.39%) 0.01 ( 5.30%) 0.01 ( 5.32%) 0.01 ( 5.03%) 0.01 ( 5.97%) 0.01 ( 5.22%) Elapsed stddev 0.00 ( 0.00%) 0.00 ( -9.59%) 0.00 ( 10.77%) 0.00 ( 3.24%) 0.00 ( 24.42%) 0.00 ( 31.86%) 0.00 ( -7.46%) 0.00 ( 6.11%) Elapsed max 0.01 ( 0.00%) 0.01 ( -0.01%) 0.01 ( 6.83%) 0.01 ( 5.42%) 0.01 ( 5.79%) 0.01 ( 5.53%) 0.01 ( 6.08%) 0.01 ( 5.26%) Elapsed range 0.00 ( 0.00%) 0.00 ( 7.30%) 0.00 ( 24.38%) 0.00 ( 6.10%) 0.00 ( 30.79%) 0.00 ( 42.52%) 0.00 ( 6.11%) 0.00 ( 10.07%) This patch (of 7): In putback_lru_page() since commit c53954a092 (""mm: remove lru parameter from __lru_cache_add and lru_cache_add_lru") it is no longer needed to determine lru list via page_lru_base_type(). This patch replaces it with simple flag is_unevictable which says that the page was put on the inevictable list. This is the only information that matters in subsequent tests. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Jörn Engel <joern@logfs.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 04:22:26 +07:00
if (was_unevictable && !is_unevictable)
count_vm_event(UNEVICTABLE_PGRESCUED);
mm: putback_lru_page: remove unnecessary call to page_lru_base_type() The goal of this patch series is to improve performance of munlock() of large mlocked memory areas on systems without THP. This is motivated by reported very long times of crash recovery of processes with such areas, where munlock() can take several seconds. See http://lwn.net/Articles/548108/ The work was driven by a simple benchmark (to be included in mmtests) that mmaps() e.g. 56GB with MAP_LOCKED | MAP_POPULATE and measures the time of munlock(). Profiling was performed by attaching operf --pid to the process and sending a signal to trigger the munlock() part and then notify bach the monitoring wrapper to stop operf, so that only munlock() appears in the profile. The profiles have shown that CPU time is spent mostly by atomic operations and repeated locking per single pages. This series aims to reduce both, starting from simpler to more complex changes. Patch 1 performs a simple cleanup in putback_lru_page() so that page lru base type is not determined without being actually needed. Patch 2 removes an unnecessary call to lru_add_drain() which drains the per-cpu pagevec after each munlocked page is put there. Patch 3 changes munlock_vma_range() to use an on-stack pagevec for isolating multiple non-THP pages under a single lru_lock instead of locking and processing each page separately. Patch 4 changes the NR_MLOCK accounting to be called only once per the pvec introduced by previous patch. Patch 5 uses the introduced pagevec to batch also the work of putback_lru_page when possible, bypassing the per-cpu pvec and associated overhead. Patch 6 removes a redundant get_page/put_page pair which saves costly atomic operations. Patch 7 avoids calling follow_page_mask() on each individual page, and obtains multiple page references under a single page table lock where possible. Measurements were made using 3.11-rc3 as a baseline. The first set of measurements shows the possibly ideal conditions where batching should help the most. All memory is allocated from a single NUMA node and THP is disabled. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 3.38 ( 0.00%) 3.39 ( -0.13%) 3.00 ( 11.33%) 2.70 ( 20.20%) 2.67 ( 21.11%) 2.37 ( 29.88%) 2.20 ( 34.91%) 1.91 ( 43.59%) Elapsed mean 3.39 ( 0.00%) 3.40 ( -0.23%) 3.01 ( 11.33%) 2.70 ( 20.26%) 2.67 ( 21.21%) 2.38 ( 29.88%) 2.21 ( 34.93%) 1.92 ( 43.46%) Elapsed stddev 0.01 ( 0.00%) 0.01 (-43.09%) 0.01 ( 15.42%) 0.01 ( 23.42%) 0.00 ( 89.78%) 0.01 ( -7.15%) 0.00 ( 76.69%) 0.02 (-91.77%) Elapsed max 3.41 ( 0.00%) 3.43 ( -0.52%) 3.03 ( 11.29%) 2.72 ( 20.16%) 2.67 ( 21.63%) 2.40 ( 29.50%) 2.21 ( 35.21%) 1.96 ( 42.39%) Elapsed range 0.03 ( 0.00%) 0.04 (-51.16%) 0.02 ( 6.27%) 0.02 ( 14.67%) 0.00 ( 88.90%) 0.03 (-19.18%) 0.01 ( 73.70%) 0.06 (-113.35% The second set of measurements simulates the worst possible conditions for batching by using numactl --interleave, so that there is in fact only one page per pagevec. Even in this case the series seems to improve performance thanks to reduced atomic operations and removal of lru_add_drain(). timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 4.00 ( 0.00%) 4.04 ( -0.93%) 3.87 ( 3.37%) 3.72 ( 6.94%) 3.81 ( 4.72%) 3.69 ( 7.82%) 3.64 ( 8.92%) 3.41 ( 14.81%) Elapsed mean 4.17 ( 0.00%) 4.15 ( 0.51%) 4.03 ( 3.49%) 3.89 ( 6.84%) 3.86 ( 7.48%) 3.89 ( 6.69%) 3.70 ( 11.27%) 3.48 ( 16.59%) Elapsed stddev 0.16 ( 0.00%) 0.08 ( 50.76%) 0.10 ( 41.58%) 0.16 ( 4.59%) 0.05 ( 72.38%) 0.19 (-12.91%) 0.05 ( 68.09%) 0.06 ( 66.03%) Elapsed max 4.34 ( 0.00%) 4.32 ( 0.56%) 4.19 ( 3.62%) 4.12 ( 5.15%) 3.91 ( 9.88%) 4.12 ( 5.25%) 3.80 ( 12.58%) 3.56 ( 18.08%) Elapsed range 0.34 ( 0.00%) 0.28 ( 17.91%) 0.32 ( 6.45%) 0.40 (-15.73%) 0.10 ( 70.06%) 0.43 (-24.84%) 0.15 ( 55.32%) 0.15 ( 56.16%) For completeness, a third set of measurements shows the situation where THP is enabled and allocations are again done on a single NUMA node. Here munlock() is already very fast thanks to huge pages, and this series does not compromise that performance. It seems that the removal of call to lru_add_drain() still helps a bit. timedmunlock 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 0 1 2 3 4 5 6 7 Elapsed min 0.01 ( 0.00%) 0.01 ( -0.11%) 0.01 ( 6.59%) 0.01 ( 5.41%) 0.01 ( 5.45%) 0.01 ( 5.03%) 0.01 ( 6.08%) 0.01 ( 5.20%) Elapsed mean 0.01 ( 0.00%) 0.01 ( -0.27%) 0.01 ( 6.39%) 0.01 ( 5.30%) 0.01 ( 5.32%) 0.01 ( 5.03%) 0.01 ( 5.97%) 0.01 ( 5.22%) Elapsed stddev 0.00 ( 0.00%) 0.00 ( -9.59%) 0.00 ( 10.77%) 0.00 ( 3.24%) 0.00 ( 24.42%) 0.00 ( 31.86%) 0.00 ( -7.46%) 0.00 ( 6.11%) Elapsed max 0.01 ( 0.00%) 0.01 ( -0.01%) 0.01 ( 6.83%) 0.01 ( 5.42%) 0.01 ( 5.79%) 0.01 ( 5.53%) 0.01 ( 6.08%) 0.01 ( 5.26%) Elapsed range 0.00 ( 0.00%) 0.00 ( 7.30%) 0.00 ( 24.38%) 0.00 ( 6.10%) 0.00 ( 30.79%) 0.00 ( 42.52%) 0.00 ( 6.11%) 0.00 ( 10.07%) This patch (of 7): In putback_lru_page() since commit c53954a092 (""mm: remove lru parameter from __lru_cache_add and lru_cache_add_lru") it is no longer needed to determine lru list via page_lru_base_type(). This patch replaces it with simple flag is_unevictable which says that the page was put on the inevictable list. This is the only information that matters in subsequent tests. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Jörn Engel <joern@logfs.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 04:22:26 +07:00
else if (!was_unevictable && is_unevictable)
count_vm_event(UNEVICTABLE_PGCULLED);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
put_page(page); /* drop ref from isolate */
}
vmscan: factor out page reference checks The used-once mapped file page detection patchset. It is meant to help workloads with large amounts of shortly used file mappings, like rtorrent hashing a file or git when dealing with loose objects (git gc on a bigger site?). Right now, the VM activates referenced mapped file pages on first encounter on the inactive list and it takes a full memory cycle to reclaim them again. When those pages dominate memory, the system no longer has a meaningful notion of 'working set' and is required to give up the active list to make reclaim progress. Obviously, this results in rather bad scanning latencies and the wrong pages being reclaimed. This patch makes the VM be more careful about activating mapped file pages in the first place. The minimum granted lifetime without another memory access becomes an inactive list cycle instead of the full memory cycle, which is more natural given the mentioned loads. This test resembles a hashing rtorrent process. Sequentially, 32MB chunks of a file are mapped into memory, hashed (sha1) and unmapped again. While this happens, every 5 seconds a process is launched and its execution time taken: python2.4 -c 'import pydoc' old: max=2.31s mean=1.26s (0.34) new: max=1.25s mean=0.32s (0.32) find /etc -type f old: max=2.52s mean=1.44s (0.43) new: max=1.92s mean=0.12s (0.17) vim -c ':quit' old: max=6.14s mean=4.03s (0.49) new: max=3.48s mean=2.41s (0.25) mplayer --help old: max=8.08s mean=5.74s (1.02) new: max=3.79s mean=1.32s (0.81) overall hash time (stdev): old: time=1192.30 (12.85) thruput=25.78mb/s (0.27) new: time=1060.27 (32.58) thruput=29.02mb/s (0.88) (-11%) I also tested kernbench with regular IO streaming in the background to see whether the delayed activation of frequently used mapped file pages had a negative impact on performance in the presence of pressure on the inactive list. The patch made no significant difference in timing, neither for kernbench nor for the streaming IO throughput. The first patch submission raised concerns about the cost of the extra faults for actually activated pages on machines that have no hardware support for young page table entries. I created an artificial worst case scenario on an ARM machine with around 300MHz and 64MB of memory to figure out the dimensions involved. The test would mmap a file of 20MB, then 1. touch all its pages to fault them in 2. force one full scan cycle on the inactive file LRU -- old: mapping pages activated -- new: mapping pages inactive 3. touch the mapping pages again -- old and new: fault exceptions to set the young bits 4. force another full scan cycle on the inactive file LRU 5. touch the mapping pages one last time -- new: fault exceptions to set the young bits The test showed an overall increase of 6% in time over 100 iterations of the above (old: ~212sec, new: ~225sec). 13 secs total overhead / (100 * 5k pages), ignoring the execution time of the test itself, makes for about 25us overhead for every page that gets actually activated. Note: 1. File mapping the size of one third of main memory, _completely_ in active use across memory pressure - i.e., most pages referenced within one LRU cycle. This should be rare to non-existant, especially on such embedded setups. 2. Many huge activation batches. Those batches only occur when the working set fluctuates. If it changes completely between every full LRU cycle, you have problematic reclaim overhead anyway. 3. Access of activated pages at maximum speed: sequential loads from every single page without doing anything in between. In reality, the extra faults will get distributed between actual operations on the data. So even if a workload manages to get the VM into the situation of activating a third of memory in one go on such a setup, it will take 2.2 seconds instead 2.1 without the patch. Comparing the numbers (and my user-experience over several months), I think this change is an overall improvement to the VM. Patch 1 is only refactoring to break up that ugly compound conditional in shrink_page_list() and make it easy to document and add new checks in a readable fashion. Patch 2 gets rid of the obsolete page_mapping_inuse(). It's not strictly related to #3, but it was in the original submission and is a net simplification, so I kept it. Patch 3 implements used-once detection of mapped file pages. This patch: Moving the big conditional into its own predicate function makes the code a bit easier to read and allows for better commenting on the checks one-by-one. This is just cleaning up, no semantics should have been changed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:19 +07:00
enum page_references {
PAGEREF_RECLAIM,
PAGEREF_RECLAIM_CLEAN,
vmscan: detect mapped file pages used only once The VM currently assumes that an inactive, mapped and referenced file page is in use and promotes it to the active list. However, every mapped file page starts out like this and thus a problem arises when workloads create a stream of such pages that are used only for a short time. By flooding the active list with those pages, the VM quickly gets into trouble finding eligible reclaim canditates. The result is long allocation latencies and eviction of the wrong pages. This patch reuses the PG_referenced page flag (used for unmapped file pages) to implement a usage detection that scales with the speed of LRU list cycling (i.e. memory pressure). If the scanner encounters those pages, the flag is set and the page cycled again on the inactive list. Only if it returns with another page table reference it is activated. Otherwise it is reclaimed as 'not recently used cache'. This effectively changes the minimum lifetime of a used-once mapped file page from a full memory cycle to an inactive list cycle, which allows it to occur in linear streams without affecting the stable working set of the system. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:22 +07:00
PAGEREF_KEEP,
vmscan: factor out page reference checks The used-once mapped file page detection patchset. It is meant to help workloads with large amounts of shortly used file mappings, like rtorrent hashing a file or git when dealing with loose objects (git gc on a bigger site?). Right now, the VM activates referenced mapped file pages on first encounter on the inactive list and it takes a full memory cycle to reclaim them again. When those pages dominate memory, the system no longer has a meaningful notion of 'working set' and is required to give up the active list to make reclaim progress. Obviously, this results in rather bad scanning latencies and the wrong pages being reclaimed. This patch makes the VM be more careful about activating mapped file pages in the first place. The minimum granted lifetime without another memory access becomes an inactive list cycle instead of the full memory cycle, which is more natural given the mentioned loads. This test resembles a hashing rtorrent process. Sequentially, 32MB chunks of a file are mapped into memory, hashed (sha1) and unmapped again. While this happens, every 5 seconds a process is launched and its execution time taken: python2.4 -c 'import pydoc' old: max=2.31s mean=1.26s (0.34) new: max=1.25s mean=0.32s (0.32) find /etc -type f old: max=2.52s mean=1.44s (0.43) new: max=1.92s mean=0.12s (0.17) vim -c ':quit' old: max=6.14s mean=4.03s (0.49) new: max=3.48s mean=2.41s (0.25) mplayer --help old: max=8.08s mean=5.74s (1.02) new: max=3.79s mean=1.32s (0.81) overall hash time (stdev): old: time=1192.30 (12.85) thruput=25.78mb/s (0.27) new: time=1060.27 (32.58) thruput=29.02mb/s (0.88) (-11%) I also tested kernbench with regular IO streaming in the background to see whether the delayed activation of frequently used mapped file pages had a negative impact on performance in the presence of pressure on the inactive list. The patch made no significant difference in timing, neither for kernbench nor for the streaming IO throughput. The first patch submission raised concerns about the cost of the extra faults for actually activated pages on machines that have no hardware support for young page table entries. I created an artificial worst case scenario on an ARM machine with around 300MHz and 64MB of memory to figure out the dimensions involved. The test would mmap a file of 20MB, then 1. touch all its pages to fault them in 2. force one full scan cycle on the inactive file LRU -- old: mapping pages activated -- new: mapping pages inactive 3. touch the mapping pages again -- old and new: fault exceptions to set the young bits 4. force another full scan cycle on the inactive file LRU 5. touch the mapping pages one last time -- new: fault exceptions to set the young bits The test showed an overall increase of 6% in time over 100 iterations of the above (old: ~212sec, new: ~225sec). 13 secs total overhead / (100 * 5k pages), ignoring the execution time of the test itself, makes for about 25us overhead for every page that gets actually activated. Note: 1. File mapping the size of one third of main memory, _completely_ in active use across memory pressure - i.e., most pages referenced within one LRU cycle. This should be rare to non-existant, especially on such embedded setups. 2. Many huge activation batches. Those batches only occur when the working set fluctuates. If it changes completely between every full LRU cycle, you have problematic reclaim overhead anyway. 3. Access of activated pages at maximum speed: sequential loads from every single page without doing anything in between. In reality, the extra faults will get distributed between actual operations on the data. So even if a workload manages to get the VM into the situation of activating a third of memory in one go on such a setup, it will take 2.2 seconds instead 2.1 without the patch. Comparing the numbers (and my user-experience over several months), I think this change is an overall improvement to the VM. Patch 1 is only refactoring to break up that ugly compound conditional in shrink_page_list() and make it easy to document and add new checks in a readable fashion. Patch 2 gets rid of the obsolete page_mapping_inuse(). It's not strictly related to #3, but it was in the original submission and is a net simplification, so I kept it. Patch 3 implements used-once detection of mapped file pages. This patch: Moving the big conditional into its own predicate function makes the code a bit easier to read and allows for better commenting on the checks one-by-one. This is just cleaning up, no semantics should have been changed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:19 +07:00
PAGEREF_ACTIVATE,
};
static enum page_references page_check_references(struct page *page,
struct scan_control *sc)
{
vmscan: detect mapped file pages used only once The VM currently assumes that an inactive, mapped and referenced file page is in use and promotes it to the active list. However, every mapped file page starts out like this and thus a problem arises when workloads create a stream of such pages that are used only for a short time. By flooding the active list with those pages, the VM quickly gets into trouble finding eligible reclaim canditates. The result is long allocation latencies and eviction of the wrong pages. This patch reuses the PG_referenced page flag (used for unmapped file pages) to implement a usage detection that scales with the speed of LRU list cycling (i.e. memory pressure). If the scanner encounters those pages, the flag is set and the page cycled again on the inactive list. Only if it returns with another page table reference it is activated. Otherwise it is reclaimed as 'not recently used cache'. This effectively changes the minimum lifetime of a used-once mapped file page from a full memory cycle to an inactive list cycle, which allows it to occur in linear streams without affecting the stable working set of the system. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:22 +07:00
int referenced_ptes, referenced_page;
vmscan: factor out page reference checks The used-once mapped file page detection patchset. It is meant to help workloads with large amounts of shortly used file mappings, like rtorrent hashing a file or git when dealing with loose objects (git gc on a bigger site?). Right now, the VM activates referenced mapped file pages on first encounter on the inactive list and it takes a full memory cycle to reclaim them again. When those pages dominate memory, the system no longer has a meaningful notion of 'working set' and is required to give up the active list to make reclaim progress. Obviously, this results in rather bad scanning latencies and the wrong pages being reclaimed. This patch makes the VM be more careful about activating mapped file pages in the first place. The minimum granted lifetime without another memory access becomes an inactive list cycle instead of the full memory cycle, which is more natural given the mentioned loads. This test resembles a hashing rtorrent process. Sequentially, 32MB chunks of a file are mapped into memory, hashed (sha1) and unmapped again. While this happens, every 5 seconds a process is launched and its execution time taken: python2.4 -c 'import pydoc' old: max=2.31s mean=1.26s (0.34) new: max=1.25s mean=0.32s (0.32) find /etc -type f old: max=2.52s mean=1.44s (0.43) new: max=1.92s mean=0.12s (0.17) vim -c ':quit' old: max=6.14s mean=4.03s (0.49) new: max=3.48s mean=2.41s (0.25) mplayer --help old: max=8.08s mean=5.74s (1.02) new: max=3.79s mean=1.32s (0.81) overall hash time (stdev): old: time=1192.30 (12.85) thruput=25.78mb/s (0.27) new: time=1060.27 (32.58) thruput=29.02mb/s (0.88) (-11%) I also tested kernbench with regular IO streaming in the background to see whether the delayed activation of frequently used mapped file pages had a negative impact on performance in the presence of pressure on the inactive list. The patch made no significant difference in timing, neither for kernbench nor for the streaming IO throughput. The first patch submission raised concerns about the cost of the extra faults for actually activated pages on machines that have no hardware support for young page table entries. I created an artificial worst case scenario on an ARM machine with around 300MHz and 64MB of memory to figure out the dimensions involved. The test would mmap a file of 20MB, then 1. touch all its pages to fault them in 2. force one full scan cycle on the inactive file LRU -- old: mapping pages activated -- new: mapping pages inactive 3. touch the mapping pages again -- old and new: fault exceptions to set the young bits 4. force another full scan cycle on the inactive file LRU 5. touch the mapping pages one last time -- new: fault exceptions to set the young bits The test showed an overall increase of 6% in time over 100 iterations of the above (old: ~212sec, new: ~225sec). 13 secs total overhead / (100 * 5k pages), ignoring the execution time of the test itself, makes for about 25us overhead for every page that gets actually activated. Note: 1. File mapping the size of one third of main memory, _completely_ in active use across memory pressure - i.e., most pages referenced within one LRU cycle. This should be rare to non-existant, especially on such embedded setups. 2. Many huge activation batches. Those batches only occur when the working set fluctuates. If it changes completely between every full LRU cycle, you have problematic reclaim overhead anyway. 3. Access of activated pages at maximum speed: sequential loads from every single page without doing anything in between. In reality, the extra faults will get distributed between actual operations on the data. So even if a workload manages to get the VM into the situation of activating a third of memory in one go on such a setup, it will take 2.2 seconds instead 2.1 without the patch. Comparing the numbers (and my user-experience over several months), I think this change is an overall improvement to the VM. Patch 1 is only refactoring to break up that ugly compound conditional in shrink_page_list() and make it easy to document and add new checks in a readable fashion. Patch 2 gets rid of the obsolete page_mapping_inuse(). It's not strictly related to #3, but it was in the original submission and is a net simplification, so I kept it. Patch 3 implements used-once detection of mapped file pages. This patch: Moving the big conditional into its own predicate function makes the code a bit easier to read and allows for better commenting on the checks one-by-one. This is just cleaning up, no semantics should have been changed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:19 +07:00
unsigned long vm_flags;
mm: memcg: count pte references from every member of the reclaimed hierarchy The rmap walker checking page table references has historically ignored references from VMAs that were not part of the memcg that was being reclaimed during memcg hard limit reclaim. When transitioning global reclaim to memcg hierarchy reclaim, I missed that bit and now references from outside a memcg are ignored even during global reclaim. Reverting back to traditional behaviour - count all references during global reclaim and only mind references of the memcg being reclaimed during limit reclaim would be one option. However, the more generic idea is to ignore references exactly then when they are outside the hierarchy that is currently under reclaim; because only then will their reclamation be of any use to help the pressure situation. It makes no sense to ignore references from a sibling memcg and then evict a page that will be immediately refaulted by that sibling which contributes to the same usage of the common ancestor under reclaim. The solution: make the rmap walker ignore references from VMAs that are not part of the hierarchy that is being reclaimed. Flat limit reclaim will stay the same, hierarchical limit reclaim will mind the references only to pages that the hierarchy owns. Global reclaim, since it reclaims from all memcgs, will be fixed to regard all references. [akpm@linux-foundation.org: name the args in the declaration] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Konstantin Khlebnikov<khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:25 +07:00
referenced_ptes = page_referenced(page, 1, sc->target_mem_cgroup,
&vm_flags);
vmscan: detect mapped file pages used only once The VM currently assumes that an inactive, mapped and referenced file page is in use and promotes it to the active list. However, every mapped file page starts out like this and thus a problem arises when workloads create a stream of such pages that are used only for a short time. By flooding the active list with those pages, the VM quickly gets into trouble finding eligible reclaim canditates. The result is long allocation latencies and eviction of the wrong pages. This patch reuses the PG_referenced page flag (used for unmapped file pages) to implement a usage detection that scales with the speed of LRU list cycling (i.e. memory pressure). If the scanner encounters those pages, the flag is set and the page cycled again on the inactive list. Only if it returns with another page table reference it is activated. Otherwise it is reclaimed as 'not recently used cache'. This effectively changes the minimum lifetime of a used-once mapped file page from a full memory cycle to an inactive list cycle, which allows it to occur in linear streams without affecting the stable working set of the system. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:22 +07:00
referenced_page = TestClearPageReferenced(page);
vmscan: factor out page reference checks The used-once mapped file page detection patchset. It is meant to help workloads with large amounts of shortly used file mappings, like rtorrent hashing a file or git when dealing with loose objects (git gc on a bigger site?). Right now, the VM activates referenced mapped file pages on first encounter on the inactive list and it takes a full memory cycle to reclaim them again. When those pages dominate memory, the system no longer has a meaningful notion of 'working set' and is required to give up the active list to make reclaim progress. Obviously, this results in rather bad scanning latencies and the wrong pages being reclaimed. This patch makes the VM be more careful about activating mapped file pages in the first place. The minimum granted lifetime without another memory access becomes an inactive list cycle instead of the full memory cycle, which is more natural given the mentioned loads. This test resembles a hashing rtorrent process. Sequentially, 32MB chunks of a file are mapped into memory, hashed (sha1) and unmapped again. While this happens, every 5 seconds a process is launched and its execution time taken: python2.4 -c 'import pydoc' old: max=2.31s mean=1.26s (0.34) new: max=1.25s mean=0.32s (0.32) find /etc -type f old: max=2.52s mean=1.44s (0.43) new: max=1.92s mean=0.12s (0.17) vim -c ':quit' old: max=6.14s mean=4.03s (0.49) new: max=3.48s mean=2.41s (0.25) mplayer --help old: max=8.08s mean=5.74s (1.02) new: max=3.79s mean=1.32s (0.81) overall hash time (stdev): old: time=1192.30 (12.85) thruput=25.78mb/s (0.27) new: time=1060.27 (32.58) thruput=29.02mb/s (0.88) (-11%) I also tested kernbench with regular IO streaming in the background to see whether the delayed activation of frequently used mapped file pages had a negative impact on performance in the presence of pressure on the inactive list. The patch made no significant difference in timing, neither for kernbench nor for the streaming IO throughput. The first patch submission raised concerns about the cost of the extra faults for actually activated pages on machines that have no hardware support for young page table entries. I created an artificial worst case scenario on an ARM machine with around 300MHz and 64MB of memory to figure out the dimensions involved. The test would mmap a file of 20MB, then 1. touch all its pages to fault them in 2. force one full scan cycle on the inactive file LRU -- old: mapping pages activated -- new: mapping pages inactive 3. touch the mapping pages again -- old and new: fault exceptions to set the young bits 4. force another full scan cycle on the inactive file LRU 5. touch the mapping pages one last time -- new: fault exceptions to set the young bits The test showed an overall increase of 6% in time over 100 iterations of the above (old: ~212sec, new: ~225sec). 13 secs total overhead / (100 * 5k pages), ignoring the execution time of the test itself, makes for about 25us overhead for every page that gets actually activated. Note: 1. File mapping the size of one third of main memory, _completely_ in active use across memory pressure - i.e., most pages referenced within one LRU cycle. This should be rare to non-existant, especially on such embedded setups. 2. Many huge activation batches. Those batches only occur when the working set fluctuates. If it changes completely between every full LRU cycle, you have problematic reclaim overhead anyway. 3. Access of activated pages at maximum speed: sequential loads from every single page without doing anything in between. In reality, the extra faults will get distributed between actual operations on the data. So even if a workload manages to get the VM into the situation of activating a third of memory in one go on such a setup, it will take 2.2 seconds instead 2.1 without the patch. Comparing the numbers (and my user-experience over several months), I think this change is an overall improvement to the VM. Patch 1 is only refactoring to break up that ugly compound conditional in shrink_page_list() and make it easy to document and add new checks in a readable fashion. Patch 2 gets rid of the obsolete page_mapping_inuse(). It's not strictly related to #3, but it was in the original submission and is a net simplification, so I kept it. Patch 3 implements used-once detection of mapped file pages. This patch: Moving the big conditional into its own predicate function makes the code a bit easier to read and allows for better commenting on the checks one-by-one. This is just cleaning up, no semantics should have been changed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:19 +07:00
/*
* Mlock lost the isolation race with us. Let try_to_unmap()
* move the page to the unevictable list.
*/
if (vm_flags & VM_LOCKED)
return PAGEREF_RECLAIM;
vmscan: detect mapped file pages used only once The VM currently assumes that an inactive, mapped and referenced file page is in use and promotes it to the active list. However, every mapped file page starts out like this and thus a problem arises when workloads create a stream of such pages that are used only for a short time. By flooding the active list with those pages, the VM quickly gets into trouble finding eligible reclaim canditates. The result is long allocation latencies and eviction of the wrong pages. This patch reuses the PG_referenced page flag (used for unmapped file pages) to implement a usage detection that scales with the speed of LRU list cycling (i.e. memory pressure). If the scanner encounters those pages, the flag is set and the page cycled again on the inactive list. Only if it returns with another page table reference it is activated. Otherwise it is reclaimed as 'not recently used cache'. This effectively changes the minimum lifetime of a used-once mapped file page from a full memory cycle to an inactive list cycle, which allows it to occur in linear streams without affecting the stable working set of the system. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:22 +07:00
if (referenced_ptes) {
mm: consider all swapped back pages in used-once logic Commit 645747462435 ("vmscan: detect mapped file pages used only once") made mapped pages have another round in inactive list because they might be just short lived and so we could consider them again next time. This heuristic helps to reduce pressure on the active list with a streaming IO worklods. This patch fixes a regression introduced by this commit for heavy shmem based workloads because unlike Anon pages, which are excluded from this heuristic because they are usually long lived, shmem pages are handled as a regular page cache. This doesn't work quite well, unfortunately, if the workload is mostly backed by shmem (in memory database sitting on 80% of memory) with a streaming IO in the background (backup - up to 20% of memory). Anon inactive list is full of (dirty) shmem pages when watermarks are hit. Shmem pages are kept in the inactive list (they are referenced) in the first round and it is hard to reclaim anything else so we reach lower scanning priorities very quickly which leads to an excessive swap out. Let's fix this by excluding all swap backed pages (they tend to be long lived wrt. the regular page cache anyway) from used-once heuristic and rather activate them if they are referenced. The customer's workload is shmem backed database (80% of RAM) and they are measuring transactions/s with an IO in the background (20%). Transactions touch more or less random rows in the table. The transaction rate fell by a factor of 3 (in the worst case) because of commit 64574746. This patch restores the previous numbers. Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan@kernel.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:45 +07:00
if (PageSwapBacked(page))
vmscan: detect mapped file pages used only once The VM currently assumes that an inactive, mapped and referenced file page is in use and promotes it to the active list. However, every mapped file page starts out like this and thus a problem arises when workloads create a stream of such pages that are used only for a short time. By flooding the active list with those pages, the VM quickly gets into trouble finding eligible reclaim canditates. The result is long allocation latencies and eviction of the wrong pages. This patch reuses the PG_referenced page flag (used for unmapped file pages) to implement a usage detection that scales with the speed of LRU list cycling (i.e. memory pressure). If the scanner encounters those pages, the flag is set and the page cycled again on the inactive list. Only if it returns with another page table reference it is activated. Otherwise it is reclaimed as 'not recently used cache'. This effectively changes the minimum lifetime of a used-once mapped file page from a full memory cycle to an inactive list cycle, which allows it to occur in linear streams without affecting the stable working set of the system. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:22 +07:00
return PAGEREF_ACTIVATE;
/*
* All mapped pages start out with page table
* references from the instantiating fault, so we need
* to look twice if a mapped file page is used more
* than once.
*
* Mark it and spare it for another trip around the
* inactive list. Another page table reference will
* lead to its activation.
*
* Note: the mark is set for activated pages as well
* so that recently deactivated but used pages are
* quickly recovered.
*/
SetPageReferenced(page);
vmscan: promote shared file mapped pages Commit 645747462435 ("vmscan: detect mapped file pages used only once") greatly decreases lifetime of single-used mapped file pages. Unfortunately it also decreases life time of all shared mapped file pages. Because after commit bf3f3bc5e7347 ("mm: don't mark_page_accessed in fault path") page-fault handler does not mark page active or even referenced. Thus page_check_references() activates file page only if it was used twice while it stays in inactive list, meanwhile it activates anon pages after first access. Inactive list can be small enough, this way reclaimer can accidentally throw away any widely used page if it wasn't used twice in short period. After this patch page_check_references() also activate file mapped page at first inactive list scan if this page is already used multiple times via several ptes. I found this while trying to fix degragation in rhel6 (~2.6.32) from rhel5 (~2.6.18). There a complete mess with >100 web/mail/spam/ftp containers, they share all their files but there a lot of anonymous pages: ~500mb shared file mapped memory and 15-20Gb non-shared anonymous memory. In this situation major-pagefaults are very costly, because all containers share the same page. In my load kernel created a disproportionate pressure on the file memory, compared with the anonymous, they equaled only if I raise swappiness up to 150 =) These patches actually wasn't helped a lot in my problem, but I saw noticable (10-20 times) reduce in count and average time of major-pagefault in file-mapped areas. Actually both patches are fixes for commit v2.6.33-5448-g6457474, because it was aimed at one scenario (singly used pages), but it breaks the logic in other scenarios (shared and/or executable pages) Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Pekka Enberg <penberg@kernel.org> Acked-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 06:06:59 +07:00
if (referenced_page || referenced_ptes > 1)
vmscan: detect mapped file pages used only once The VM currently assumes that an inactive, mapped and referenced file page is in use and promotes it to the active list. However, every mapped file page starts out like this and thus a problem arises when workloads create a stream of such pages that are used only for a short time. By flooding the active list with those pages, the VM quickly gets into trouble finding eligible reclaim canditates. The result is long allocation latencies and eviction of the wrong pages. This patch reuses the PG_referenced page flag (used for unmapped file pages) to implement a usage detection that scales with the speed of LRU list cycling (i.e. memory pressure). If the scanner encounters those pages, the flag is set and the page cycled again on the inactive list. Only if it returns with another page table reference it is activated. Otherwise it is reclaimed as 'not recently used cache'. This effectively changes the minimum lifetime of a used-once mapped file page from a full memory cycle to an inactive list cycle, which allows it to occur in linear streams without affecting the stable working set of the system. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:22 +07:00
return PAGEREF_ACTIVATE;
/*
* Activate file-backed executable pages after first usage.
*/
if (vm_flags & VM_EXEC)
return PAGEREF_ACTIVATE;
vmscan: detect mapped file pages used only once The VM currently assumes that an inactive, mapped and referenced file page is in use and promotes it to the active list. However, every mapped file page starts out like this and thus a problem arises when workloads create a stream of such pages that are used only for a short time. By flooding the active list with those pages, the VM quickly gets into trouble finding eligible reclaim canditates. The result is long allocation latencies and eviction of the wrong pages. This patch reuses the PG_referenced page flag (used for unmapped file pages) to implement a usage detection that scales with the speed of LRU list cycling (i.e. memory pressure). If the scanner encounters those pages, the flag is set and the page cycled again on the inactive list. Only if it returns with another page table reference it is activated. Otherwise it is reclaimed as 'not recently used cache'. This effectively changes the minimum lifetime of a used-once mapped file page from a full memory cycle to an inactive list cycle, which allows it to occur in linear streams without affecting the stable working set of the system. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:22 +07:00
return PAGEREF_KEEP;
}
vmscan: factor out page reference checks The used-once mapped file page detection patchset. It is meant to help workloads with large amounts of shortly used file mappings, like rtorrent hashing a file or git when dealing with loose objects (git gc on a bigger site?). Right now, the VM activates referenced mapped file pages on first encounter on the inactive list and it takes a full memory cycle to reclaim them again. When those pages dominate memory, the system no longer has a meaningful notion of 'working set' and is required to give up the active list to make reclaim progress. Obviously, this results in rather bad scanning latencies and the wrong pages being reclaimed. This patch makes the VM be more careful about activating mapped file pages in the first place. The minimum granted lifetime without another memory access becomes an inactive list cycle instead of the full memory cycle, which is more natural given the mentioned loads. This test resembles a hashing rtorrent process. Sequentially, 32MB chunks of a file are mapped into memory, hashed (sha1) and unmapped again. While this happens, every 5 seconds a process is launched and its execution time taken: python2.4 -c 'import pydoc' old: max=2.31s mean=1.26s (0.34) new: max=1.25s mean=0.32s (0.32) find /etc -type f old: max=2.52s mean=1.44s (0.43) new: max=1.92s mean=0.12s (0.17) vim -c ':quit' old: max=6.14s mean=4.03s (0.49) new: max=3.48s mean=2.41s (0.25) mplayer --help old: max=8.08s mean=5.74s (1.02) new: max=3.79s mean=1.32s (0.81) overall hash time (stdev): old: time=1192.30 (12.85) thruput=25.78mb/s (0.27) new: time=1060.27 (32.58) thruput=29.02mb/s (0.88) (-11%) I also tested kernbench with regular IO streaming in the background to see whether the delayed activation of frequently used mapped file pages had a negative impact on performance in the presence of pressure on the inactive list. The patch made no significant difference in timing, neither for kernbench nor for the streaming IO throughput. The first patch submission raised concerns about the cost of the extra faults for actually activated pages on machines that have no hardware support for young page table entries. I created an artificial worst case scenario on an ARM machine with around 300MHz and 64MB of memory to figure out the dimensions involved. The test would mmap a file of 20MB, then 1. touch all its pages to fault them in 2. force one full scan cycle on the inactive file LRU -- old: mapping pages activated -- new: mapping pages inactive 3. touch the mapping pages again -- old and new: fault exceptions to set the young bits 4. force another full scan cycle on the inactive file LRU 5. touch the mapping pages one last time -- new: fault exceptions to set the young bits The test showed an overall increase of 6% in time over 100 iterations of the above (old: ~212sec, new: ~225sec). 13 secs total overhead / (100 * 5k pages), ignoring the execution time of the test itself, makes for about 25us overhead for every page that gets actually activated. Note: 1. File mapping the size of one third of main memory, _completely_ in active use across memory pressure - i.e., most pages referenced within one LRU cycle. This should be rare to non-existant, especially on such embedded setups. 2. Many huge activation batches. Those batches only occur when the working set fluctuates. If it changes completely between every full LRU cycle, you have problematic reclaim overhead anyway. 3. Access of activated pages at maximum speed: sequential loads from every single page without doing anything in between. In reality, the extra faults will get distributed between actual operations on the data. So even if a workload manages to get the VM into the situation of activating a third of memory in one go on such a setup, it will take 2.2 seconds instead 2.1 without the patch. Comparing the numbers (and my user-experience over several months), I think this change is an overall improvement to the VM. Patch 1 is only refactoring to break up that ugly compound conditional in shrink_page_list() and make it easy to document and add new checks in a readable fashion. Patch 2 gets rid of the obsolete page_mapping_inuse(). It's not strictly related to #3, but it was in the original submission and is a net simplification, so I kept it. Patch 3 implements used-once detection of mapped file pages. This patch: Moving the big conditional into its own predicate function makes the code a bit easier to read and allows for better commenting on the checks one-by-one. This is just cleaning up, no semantics should have been changed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:19 +07:00
/* Reclaim if clean, defer dirty pages to writeback */
if (referenced_page && !PageSwapBacked(page))
vmscan: detect mapped file pages used only once The VM currently assumes that an inactive, mapped and referenced file page is in use and promotes it to the active list. However, every mapped file page starts out like this and thus a problem arises when workloads create a stream of such pages that are used only for a short time. By flooding the active list with those pages, the VM quickly gets into trouble finding eligible reclaim canditates. The result is long allocation latencies and eviction of the wrong pages. This patch reuses the PG_referenced page flag (used for unmapped file pages) to implement a usage detection that scales with the speed of LRU list cycling (i.e. memory pressure). If the scanner encounters those pages, the flag is set and the page cycled again on the inactive list. Only if it returns with another page table reference it is activated. Otherwise it is reclaimed as 'not recently used cache'. This effectively changes the minimum lifetime of a used-once mapped file page from a full memory cycle to an inactive list cycle, which allows it to occur in linear streams without affecting the stable working set of the system. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:22 +07:00
return PAGEREF_RECLAIM_CLEAN;
return PAGEREF_RECLAIM;
vmscan: factor out page reference checks The used-once mapped file page detection patchset. It is meant to help workloads with large amounts of shortly used file mappings, like rtorrent hashing a file or git when dealing with loose objects (git gc on a bigger site?). Right now, the VM activates referenced mapped file pages on first encounter on the inactive list and it takes a full memory cycle to reclaim them again. When those pages dominate memory, the system no longer has a meaningful notion of 'working set' and is required to give up the active list to make reclaim progress. Obviously, this results in rather bad scanning latencies and the wrong pages being reclaimed. This patch makes the VM be more careful about activating mapped file pages in the first place. The minimum granted lifetime without another memory access becomes an inactive list cycle instead of the full memory cycle, which is more natural given the mentioned loads. This test resembles a hashing rtorrent process. Sequentially, 32MB chunks of a file are mapped into memory, hashed (sha1) and unmapped again. While this happens, every 5 seconds a process is launched and its execution time taken: python2.4 -c 'import pydoc' old: max=2.31s mean=1.26s (0.34) new: max=1.25s mean=0.32s (0.32) find /etc -type f old: max=2.52s mean=1.44s (0.43) new: max=1.92s mean=0.12s (0.17) vim -c ':quit' old: max=6.14s mean=4.03s (0.49) new: max=3.48s mean=2.41s (0.25) mplayer --help old: max=8.08s mean=5.74s (1.02) new: max=3.79s mean=1.32s (0.81) overall hash time (stdev): old: time=1192.30 (12.85) thruput=25.78mb/s (0.27) new: time=1060.27 (32.58) thruput=29.02mb/s (0.88) (-11%) I also tested kernbench with regular IO streaming in the background to see whether the delayed activation of frequently used mapped file pages had a negative impact on performance in the presence of pressure on the inactive list. The patch made no significant difference in timing, neither for kernbench nor for the streaming IO throughput. The first patch submission raised concerns about the cost of the extra faults for actually activated pages on machines that have no hardware support for young page table entries. I created an artificial worst case scenario on an ARM machine with around 300MHz and 64MB of memory to figure out the dimensions involved. The test would mmap a file of 20MB, then 1. touch all its pages to fault them in 2. force one full scan cycle on the inactive file LRU -- old: mapping pages activated -- new: mapping pages inactive 3. touch the mapping pages again -- old and new: fault exceptions to set the young bits 4. force another full scan cycle on the inactive file LRU 5. touch the mapping pages one last time -- new: fault exceptions to set the young bits The test showed an overall increase of 6% in time over 100 iterations of the above (old: ~212sec, new: ~225sec). 13 secs total overhead / (100 * 5k pages), ignoring the execution time of the test itself, makes for about 25us overhead for every page that gets actually activated. Note: 1. File mapping the size of one third of main memory, _completely_ in active use across memory pressure - i.e., most pages referenced within one LRU cycle. This should be rare to non-existant, especially on such embedded setups. 2. Many huge activation batches. Those batches only occur when the working set fluctuates. If it changes completely between every full LRU cycle, you have problematic reclaim overhead anyway. 3. Access of activated pages at maximum speed: sequential loads from every single page without doing anything in between. In reality, the extra faults will get distributed between actual operations on the data. So even if a workload manages to get the VM into the situation of activating a third of memory in one go on such a setup, it will take 2.2 seconds instead 2.1 without the patch. Comparing the numbers (and my user-experience over several months), I think this change is an overall improvement to the VM. Patch 1 is only refactoring to break up that ugly compound conditional in shrink_page_list() and make it easy to document and add new checks in a readable fashion. Patch 2 gets rid of the obsolete page_mapping_inuse(). It's not strictly related to #3, but it was in the original submission and is a net simplification, so I kept it. Patch 3 implements used-once detection of mapped file pages. This patch: Moving the big conditional into its own predicate function makes the code a bit easier to read and allows for better commenting on the checks one-by-one. This is just cleaning up, no semantics should have been changed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:19 +07:00
}
mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered Further testing of the "Reduce system disruption due to kswapd" discovered a few problems. First and foremost, it's possible for pages under writeback to be freed which will lead to badness. Second, as pages were not being swapped the file LRU was being scanned faster and clean file pages were being reclaimed. In some cases this results in increased read IO to re-read data from disk. Third, more pages were being written from kswapd context which can adversly affect IO performance. Lastly, it was observed that PageDirty pages are not necessarily dirty on all filesystems (buffers can be clean while PageDirty is set and ->writepage generates no IO) and not all filesystems set PageWriteback when the page is being written (e.g. ext3). This disconnect confuses the reclaim stalling logic. This follow-up series is aimed at these problems. The tests were based on three kernels vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to kswapd" applied on top as per what should be in Andrew's tree right now lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel The first test used memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service. It starts with no background IO on a freshly created ext4 filesystem and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%) Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%) Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%) Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%) Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%) Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%) Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%) Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%) Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%) Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%) Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%) Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%) Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%) memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 23K/sec to just over 4K/second when there is 2385M of IO going on in the background. With current mmotm, there is no collapse in performance and with this follow-up series there is little change. swaptotal is the total amount of swap traffic. With mmotm and the follow-up series, the total amount of swapping is much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 11160152 10706748 10622316 Major Faults 46305 755 678 Swap Ins 260249 0 0 Swap Outs 683860 18 18 Direct pages scanned 0 678 2520 Kswapd pages scanned 6046108 8814900 1639279 Kswapd pages reclaimed 1081954 1172267 1094635 Direct pages reclaimed 0 566 2304 Kswapd efficiency 17% 13% 66% Kswapd velocity 5217.560 7618.953 1414.879 Direct efficiency 100% 83% 91% Direct velocity 0.000 0.586 2.175 Percentage direct scans 0% 0% 0% Zone normal velocity 5105.086 6824.681 671.158 Zone dma32 velocity 112.473 794.858 745.896 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 1929612.000 6861768.000 32821.000 Page writes file 1245752 6861750 32803 Page writes anon 683860 18 18 Page reclaim immediate 7484 40 239 Sector Reads 1130320 93996 86900 Sector Writes 13508052 10823500 11804436 Page rescued immediate 0 0 0 Slabs scanned 33536 27136 18560 Direct inode steals 0 0 0 Kswapd inode steals 8641 1035 0 Kswapd skipped wait 0 0 0 THP fault alloc 8 37 33 THP collapse alloc 508 552 515 THP splits 24 1 1 THP fault fallback 0 0 0 THP collapse fail 0 0 0 There are a number of observations to make here 1. Swap outs are almost eliminated. Swap ins are 0 indicating that the pages swapped were really unused anonymous pages. Related to that, major faults are much reduced. 2. kswapd efficiency was impacted by the initial series but with these follow-up patches, the efficiency is now at 66% indicating that far fewer pages were skipped during scanning due to dirty or writeback pages. 3. kswapd velocity is reduced indicating that fewer pages are being scanned with the follow-up series as kswapd now stalls when the tail of the LRU queue is full of unqueued dirty pages. The stall gives flushers a chance to catch-up so kswapd can reclaim clean pages when it wakes 4. In light of Zlatko's recent reports about zone scanning imbalances, mmtests now reports scanning velocity on a per-zone basis. With mainline, you can see that the scanning activity is dominated by the Normal zone with over 45 times more scanning in Normal than the DMA32 zone. With the series currently in mmotm, the ratio is slightly better but it is still the case that the bulk of scanning is in the highest zone. With this follow-up series, the ratio of scanning between the Normal and DMA32 zone is roughly equal. 5. As Dave Chinner observed, the current patches in mmotm increased the number of pages written from kswapd context which is expected to adversly impact IO performance. With the follow-up patches, far fewer pages are written from kswapd context than the mainline kernel 6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With the follow-up series, there is less slab shrinking activity and no inodes were reclaimed. 7. Note that "Sectors Read" is drastically reduced implying that the source data being used for the IO is not being aggressively discarded due to page reclaim skipping over dirty pages and reclaiming clean pages. Note that the reducion in reads could also be due to inode data not being re-read from disk after a slab shrink. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 166.99 32.09 33.44 Mean sda-await 853.64 192.76 185.43 Mean sda-r_await 6.31 9.24 5.97 Mean sda-w_await 2992.81 202.65 192.43 Max sda-avgqz 1409.91 718.75 698.98 Max sda-await 6665.74 3538.00 3124.23 Max sda-r_await 58.96 111.95 58.00 Max sda-w_await 28458.94 3977.29 3148.61 In light of the changes in writes from reclaim context, the number of reads and Dave Chinner's concerns about IO performance I took a closer look at the IO stats for the test disk. Few observations 1. The average queue size is reduced by the initial series and roughly the same with this follow up. 2. Average wait times for writes are reduced and as the IO is completing faster it at least implies that the gain is because flushers are writing the files efficiently instead of page reclaim getting in the way. 3. The reduction in maximum write latency is staggering. 28 seconds down to 3 seconds. Jan Kara asked how NFS is affected by all of this. Unstable pages can be taken into account as one of the patches in the series shows but it is still the case that filesystems with unusual handling of dirty or writeback could still be treated better. Tests like postmark, fsmark and largedd showed up nothing useful. On my test setup, pages are simply not being written back from reclaim context with or without the patches and there are no changes in performance. My test setup probably is just not strong enough network-wise to be really interesting. I ran a longer-lived memcached test with IO going to NFS instead of a local disk parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%) Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%) Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%) Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%) Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%) Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%) Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%) Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%) Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%) Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%) Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%) Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%) Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%) Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%) Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%) Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%) Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%) Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%) 1. Performance does not collapse due to IO which is good. IO is also completing faster. Note with mmotm, IO completes in a third of the time and faster again with this series applied 2. Swapping is reduced, although not eliminated. The figures for the follow-up look bad but it does vary a bit as the stalling is not perfect for nfs or filesystems like ext3 with unusual handling of dirty and writeback pages 3. There are swapins, particularly with larger amounts of IO indicating that active pages are being reclaimed. However, the number of much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 36339175 35025445 35219699 Major Faults 310964 27108 51887 Swap Ins 2176399 173069 333316 Swap Outs 3344050 357228 504824 Direct pages scanned 8972 77283 43242 Kswapd pages scanned 20899983 8939566 14772851 Kswapd pages reclaimed 6193156 5172605 5231026 Direct pages reclaimed 8450 73802 39514 Kswapd efficiency 29% 57% 35% Kswapd velocity 3929.743 1847.499 3058.840 Direct efficiency 94% 95% 91% Direct velocity 1.687 15.972 8.954 Percentage direct scans 0% 0% 0% Zone normal velocity 3721.907 939.103 2185.142 Zone dma32 velocity 209.522 924.368 882.651 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 4082185.000 526319.000 537114.000 Page writes file 738135 169091 32290 Page writes anon 3344050 357228 504824 Page reclaim immediate 9524 170 5595843 Sector Reads 8909900 861192 1483680 Sector Writes 13428980 1488744 2076800 Page rescued immediate 0 0 0 Slabs scanned 38016 31744 28672 Direct inode steals 0 0 0 Kswapd inode steals 424 0 0 Kswapd skipped wait 0 0 0 THP fault alloc 14 15 119 THP collapse alloc 1767 1569 1618 THP splits 30 29 25 THP fault fallback 0 0 0 THP collapse fail 8 5 0 Compaction stalls 17 41 100 Compaction success 7 31 95 Compaction failures 10 10 5 Page migrate success 7083 22157 62217 Page migrate failure 0 0 0 Compaction pages isolated 14847 48758 135830 Compaction migrate scanned 18328 48398 138929 Compaction free scanned 2000255 355827 1720269 Compaction cost 7 24 68 I guess the main takeaway again is the much reduced page writes from reclaim context and reduced reads. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 23.58 0.35 0.44 Mean sda-await 133.47 15.72 15.46 Mean sda-r_await 4.72 4.69 3.95 Mean sda-w_await 507.69 28.40 33.68 Max sda-avgqz 680.60 12.25 23.14 Max sda-await 3958.89 221.83 286.22 Max sda-r_await 63.86 61.23 67.29 Max sda-w_await 11710.38 883.57 1767.28 And as before, write wait times are much reduced. This patch: The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority" decides whether to writeback pages from reclaim context based on the number of dirty pages encountered. This situation is flagged too easily and flushers are not given the chance to catch up resulting in more pages being written from reclaim context and potentially impacting IO performance. The check for PageWriteback is also misplaced as it happens within a PageDirty check which is nonsense as the dirty may have been cleared for IO. The accounting is updated very late and pages that are already under writeback, were reactivated, could not unmapped or could not be released are all missed. Similarly, a page is considered congested for reasons other than being congested and pages that cannot be written out in the correct context are skipped. Finally, it considers stalling and writing back filesystem pages due to encountering dirty anonymous pages at the tail of the LRU which is dumb. This patch causes kswapd to begin writing filesystem pages from reclaim context only if page reclaim found that all filesystem pages at the tail of the LRU were unqueued dirty pages. Before it starts writing filesystem pages, it will stall to give flushers a chance to catch up. The decision on whether wait_iff_congested is also now determined by dirty filesystem pages only. Congested pages are based on whether the underlying BDI is congested regardless of the context of the reclaiming process. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:57 +07:00
/* Check if a page is dirty or under writeback */
static void page_check_dirty_writeback(struct page *page,
bool *dirty, bool *writeback)
{
mm: vmscan: take page buffers dirty and locked state into account Page reclaim keeps track of dirty and under writeback pages and uses it to determine if wait_iff_congested() should stall or if kswapd should begin writing back pages. This fails to account for buffer pages that can be under writeback but not PageWriteback which is the case for filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages can have all the buffers clean and writepage does no IO so it should not be accounted as congested. This patch adds an address_space operation that filesystems may optionally use to check if a page is really dirty or really under writeback. An implementation is provided for for buffer_heads is added and used for block operations and ext3 in ordered mode. By default the page flags are obeyed. Credit goes to Jan Kara for identifying that the page flags alone are not sufficient for ext3 and sanity checking a number of ideas on how the problem could be addressed. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:02:05 +07:00
struct address_space *mapping;
mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered Further testing of the "Reduce system disruption due to kswapd" discovered a few problems. First and foremost, it's possible for pages under writeback to be freed which will lead to badness. Second, as pages were not being swapped the file LRU was being scanned faster and clean file pages were being reclaimed. In some cases this results in increased read IO to re-read data from disk. Third, more pages were being written from kswapd context which can adversly affect IO performance. Lastly, it was observed that PageDirty pages are not necessarily dirty on all filesystems (buffers can be clean while PageDirty is set and ->writepage generates no IO) and not all filesystems set PageWriteback when the page is being written (e.g. ext3). This disconnect confuses the reclaim stalling logic. This follow-up series is aimed at these problems. The tests were based on three kernels vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to kswapd" applied on top as per what should be in Andrew's tree right now lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel The first test used memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service. It starts with no background IO on a freshly created ext4 filesystem and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%) Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%) Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%) Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%) Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%) Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%) Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%) Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%) Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%) Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%) Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%) Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%) Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%) memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 23K/sec to just over 4K/second when there is 2385M of IO going on in the background. With current mmotm, there is no collapse in performance and with this follow-up series there is little change. swaptotal is the total amount of swap traffic. With mmotm and the follow-up series, the total amount of swapping is much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 11160152 10706748 10622316 Major Faults 46305 755 678 Swap Ins 260249 0 0 Swap Outs 683860 18 18 Direct pages scanned 0 678 2520 Kswapd pages scanned 6046108 8814900 1639279 Kswapd pages reclaimed 1081954 1172267 1094635 Direct pages reclaimed 0 566 2304 Kswapd efficiency 17% 13% 66% Kswapd velocity 5217.560 7618.953 1414.879 Direct efficiency 100% 83% 91% Direct velocity 0.000 0.586 2.175 Percentage direct scans 0% 0% 0% Zone normal velocity 5105.086 6824.681 671.158 Zone dma32 velocity 112.473 794.858 745.896 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 1929612.000 6861768.000 32821.000 Page writes file 1245752 6861750 32803 Page writes anon 683860 18 18 Page reclaim immediate 7484 40 239 Sector Reads 1130320 93996 86900 Sector Writes 13508052 10823500 11804436 Page rescued immediate 0 0 0 Slabs scanned 33536 27136 18560 Direct inode steals 0 0 0 Kswapd inode steals 8641 1035 0 Kswapd skipped wait 0 0 0 THP fault alloc 8 37 33 THP collapse alloc 508 552 515 THP splits 24 1 1 THP fault fallback 0 0 0 THP collapse fail 0 0 0 There are a number of observations to make here 1. Swap outs are almost eliminated. Swap ins are 0 indicating that the pages swapped were really unused anonymous pages. Related to that, major faults are much reduced. 2. kswapd efficiency was impacted by the initial series but with these follow-up patches, the efficiency is now at 66% indicating that far fewer pages were skipped during scanning due to dirty or writeback pages. 3. kswapd velocity is reduced indicating that fewer pages are being scanned with the follow-up series as kswapd now stalls when the tail of the LRU queue is full of unqueued dirty pages. The stall gives flushers a chance to catch-up so kswapd can reclaim clean pages when it wakes 4. In light of Zlatko's recent reports about zone scanning imbalances, mmtests now reports scanning velocity on a per-zone basis. With mainline, you can see that the scanning activity is dominated by the Normal zone with over 45 times more scanning in Normal than the DMA32 zone. With the series currently in mmotm, the ratio is slightly better but it is still the case that the bulk of scanning is in the highest zone. With this follow-up series, the ratio of scanning between the Normal and DMA32 zone is roughly equal. 5. As Dave Chinner observed, the current patches in mmotm increased the number of pages written from kswapd context which is expected to adversly impact IO performance. With the follow-up patches, far fewer pages are written from kswapd context than the mainline kernel 6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With the follow-up series, there is less slab shrinking activity and no inodes were reclaimed. 7. Note that "Sectors Read" is drastically reduced implying that the source data being used for the IO is not being aggressively discarded due to page reclaim skipping over dirty pages and reclaiming clean pages. Note that the reducion in reads could also be due to inode data not being re-read from disk after a slab shrink. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 166.99 32.09 33.44 Mean sda-await 853.64 192.76 185.43 Mean sda-r_await 6.31 9.24 5.97 Mean sda-w_await 2992.81 202.65 192.43 Max sda-avgqz 1409.91 718.75 698.98 Max sda-await 6665.74 3538.00 3124.23 Max sda-r_await 58.96 111.95 58.00 Max sda-w_await 28458.94 3977.29 3148.61 In light of the changes in writes from reclaim context, the number of reads and Dave Chinner's concerns about IO performance I took a closer look at the IO stats for the test disk. Few observations 1. The average queue size is reduced by the initial series and roughly the same with this follow up. 2. Average wait times for writes are reduced and as the IO is completing faster it at least implies that the gain is because flushers are writing the files efficiently instead of page reclaim getting in the way. 3. The reduction in maximum write latency is staggering. 28 seconds down to 3 seconds. Jan Kara asked how NFS is affected by all of this. Unstable pages can be taken into account as one of the patches in the series shows but it is still the case that filesystems with unusual handling of dirty or writeback could still be treated better. Tests like postmark, fsmark and largedd showed up nothing useful. On my test setup, pages are simply not being written back from reclaim context with or without the patches and there are no changes in performance. My test setup probably is just not strong enough network-wise to be really interesting. I ran a longer-lived memcached test with IO going to NFS instead of a local disk parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%) Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%) Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%) Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%) Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%) Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%) Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%) Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%) Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%) Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%) Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%) Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%) Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%) Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%) Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%) Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%) Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%) Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%) 1. Performance does not collapse due to IO which is good. IO is also completing faster. Note with mmotm, IO completes in a third of the time and faster again with this series applied 2. Swapping is reduced, although not eliminated. The figures for the follow-up look bad but it does vary a bit as the stalling is not perfect for nfs or filesystems like ext3 with unusual handling of dirty and writeback pages 3. There are swapins, particularly with larger amounts of IO indicating that active pages are being reclaimed. However, the number of much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 36339175 35025445 35219699 Major Faults 310964 27108 51887 Swap Ins 2176399 173069 333316 Swap Outs 3344050 357228 504824 Direct pages scanned 8972 77283 43242 Kswapd pages scanned 20899983 8939566 14772851 Kswapd pages reclaimed 6193156 5172605 5231026 Direct pages reclaimed 8450 73802 39514 Kswapd efficiency 29% 57% 35% Kswapd velocity 3929.743 1847.499 3058.840 Direct efficiency 94% 95% 91% Direct velocity 1.687 15.972 8.954 Percentage direct scans 0% 0% 0% Zone normal velocity 3721.907 939.103 2185.142 Zone dma32 velocity 209.522 924.368 882.651 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 4082185.000 526319.000 537114.000 Page writes file 738135 169091 32290 Page writes anon 3344050 357228 504824 Page reclaim immediate 9524 170 5595843 Sector Reads 8909900 861192 1483680 Sector Writes 13428980 1488744 2076800 Page rescued immediate 0 0 0 Slabs scanned 38016 31744 28672 Direct inode steals 0 0 0 Kswapd inode steals 424 0 0 Kswapd skipped wait 0 0 0 THP fault alloc 14 15 119 THP collapse alloc 1767 1569 1618 THP splits 30 29 25 THP fault fallback 0 0 0 THP collapse fail 8 5 0 Compaction stalls 17 41 100 Compaction success 7 31 95 Compaction failures 10 10 5 Page migrate success 7083 22157 62217 Page migrate failure 0 0 0 Compaction pages isolated 14847 48758 135830 Compaction migrate scanned 18328 48398 138929 Compaction free scanned 2000255 355827 1720269 Compaction cost 7 24 68 I guess the main takeaway again is the much reduced page writes from reclaim context and reduced reads. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 23.58 0.35 0.44 Mean sda-await 133.47 15.72 15.46 Mean sda-r_await 4.72 4.69 3.95 Mean sda-w_await 507.69 28.40 33.68 Max sda-avgqz 680.60 12.25 23.14 Max sda-await 3958.89 221.83 286.22 Max sda-r_await 63.86 61.23 67.29 Max sda-w_await 11710.38 883.57 1767.28 And as before, write wait times are much reduced. This patch: The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority" decides whether to writeback pages from reclaim context based on the number of dirty pages encountered. This situation is flagged too easily and flushers are not given the chance to catch up resulting in more pages being written from reclaim context and potentially impacting IO performance. The check for PageWriteback is also misplaced as it happens within a PageDirty check which is nonsense as the dirty may have been cleared for IO. The accounting is updated very late and pages that are already under writeback, were reactivated, could not unmapped or could not be released are all missed. Similarly, a page is considered congested for reasons other than being congested and pages that cannot be written out in the correct context are skipped. Finally, it considers stalling and writing back filesystem pages due to encountering dirty anonymous pages at the tail of the LRU which is dumb. This patch causes kswapd to begin writing filesystem pages from reclaim context only if page reclaim found that all filesystem pages at the tail of the LRU were unqueued dirty pages. Before it starts writing filesystem pages, it will stall to give flushers a chance to catch up. The decision on whether wait_iff_congested is also now determined by dirty filesystem pages only. Congested pages are based on whether the underlying BDI is congested regardless of the context of the reclaiming process. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:57 +07:00
/*
* Anonymous pages are not handled by flushers and must be written
* from reclaim context. Do not stall reclaim based on them
*/
if (!page_is_file_cache(page)) {
*dirty = false;
*writeback = false;
return;
}
/* By default assume that the page flags are accurate */
*dirty = PageDirty(page);
*writeback = PageWriteback(page);
mm: vmscan: take page buffers dirty and locked state into account Page reclaim keeps track of dirty and under writeback pages and uses it to determine if wait_iff_congested() should stall or if kswapd should begin writing back pages. This fails to account for buffer pages that can be under writeback but not PageWriteback which is the case for filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages can have all the buffers clean and writepage does no IO so it should not be accounted as congested. This patch adds an address_space operation that filesystems may optionally use to check if a page is really dirty or really under writeback. An implementation is provided for for buffer_heads is added and used for block operations and ext3 in ordered mode. By default the page flags are obeyed. Credit goes to Jan Kara for identifying that the page flags alone are not sufficient for ext3 and sanity checking a number of ideas on how the problem could be addressed. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:02:05 +07:00
/* Verify dirty/writeback state if the filesystem supports it */
if (!page_has_private(page))
return;
mapping = page_mapping(page);
if (mapping && mapping->a_ops->is_dirty_writeback)
mapping->a_ops->is_dirty_writeback(page, dirty, writeback);
mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered Further testing of the "Reduce system disruption due to kswapd" discovered a few problems. First and foremost, it's possible for pages under writeback to be freed which will lead to badness. Second, as pages were not being swapped the file LRU was being scanned faster and clean file pages were being reclaimed. In some cases this results in increased read IO to re-read data from disk. Third, more pages were being written from kswapd context which can adversly affect IO performance. Lastly, it was observed that PageDirty pages are not necessarily dirty on all filesystems (buffers can be clean while PageDirty is set and ->writepage generates no IO) and not all filesystems set PageWriteback when the page is being written (e.g. ext3). This disconnect confuses the reclaim stalling logic. This follow-up series is aimed at these problems. The tests were based on three kernels vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to kswapd" applied on top as per what should be in Andrew's tree right now lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel The first test used memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service. It starts with no background IO on a freshly created ext4 filesystem and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%) Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%) Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%) Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%) Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%) Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%) Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%) Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%) Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%) Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%) Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%) Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%) Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%) memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 23K/sec to just over 4K/second when there is 2385M of IO going on in the background. With current mmotm, there is no collapse in performance and with this follow-up series there is little change. swaptotal is the total amount of swap traffic. With mmotm and the follow-up series, the total amount of swapping is much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 11160152 10706748 10622316 Major Faults 46305 755 678 Swap Ins 260249 0 0 Swap Outs 683860 18 18 Direct pages scanned 0 678 2520 Kswapd pages scanned 6046108 8814900 1639279 Kswapd pages reclaimed 1081954 1172267 1094635 Direct pages reclaimed 0 566 2304 Kswapd efficiency 17% 13% 66% Kswapd velocity 5217.560 7618.953 1414.879 Direct efficiency 100% 83% 91% Direct velocity 0.000 0.586 2.175 Percentage direct scans 0% 0% 0% Zone normal velocity 5105.086 6824.681 671.158 Zone dma32 velocity 112.473 794.858 745.896 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 1929612.000 6861768.000 32821.000 Page writes file 1245752 6861750 32803 Page writes anon 683860 18 18 Page reclaim immediate 7484 40 239 Sector Reads 1130320 93996 86900 Sector Writes 13508052 10823500 11804436 Page rescued immediate 0 0 0 Slabs scanned 33536 27136 18560 Direct inode steals 0 0 0 Kswapd inode steals 8641 1035 0 Kswapd skipped wait 0 0 0 THP fault alloc 8 37 33 THP collapse alloc 508 552 515 THP splits 24 1 1 THP fault fallback 0 0 0 THP collapse fail 0 0 0 There are a number of observations to make here 1. Swap outs are almost eliminated. Swap ins are 0 indicating that the pages swapped were really unused anonymous pages. Related to that, major faults are much reduced. 2. kswapd efficiency was impacted by the initial series but with these follow-up patches, the efficiency is now at 66% indicating that far fewer pages were skipped during scanning due to dirty or writeback pages. 3. kswapd velocity is reduced indicating that fewer pages are being scanned with the follow-up series as kswapd now stalls when the tail of the LRU queue is full of unqueued dirty pages. The stall gives flushers a chance to catch-up so kswapd can reclaim clean pages when it wakes 4. In light of Zlatko's recent reports about zone scanning imbalances, mmtests now reports scanning velocity on a per-zone basis. With mainline, you can see that the scanning activity is dominated by the Normal zone with over 45 times more scanning in Normal than the DMA32 zone. With the series currently in mmotm, the ratio is slightly better but it is still the case that the bulk of scanning is in the highest zone. With this follow-up series, the ratio of scanning between the Normal and DMA32 zone is roughly equal. 5. As Dave Chinner observed, the current patches in mmotm increased the number of pages written from kswapd context which is expected to adversly impact IO performance. With the follow-up patches, far fewer pages are written from kswapd context than the mainline kernel 6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With the follow-up series, there is less slab shrinking activity and no inodes were reclaimed. 7. Note that "Sectors Read" is drastically reduced implying that the source data being used for the IO is not being aggressively discarded due to page reclaim skipping over dirty pages and reclaiming clean pages. Note that the reducion in reads could also be due to inode data not being re-read from disk after a slab shrink. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 166.99 32.09 33.44 Mean sda-await 853.64 192.76 185.43 Mean sda-r_await 6.31 9.24 5.97 Mean sda-w_await 2992.81 202.65 192.43 Max sda-avgqz 1409.91 718.75 698.98 Max sda-await 6665.74 3538.00 3124.23 Max sda-r_await 58.96 111.95 58.00 Max sda-w_await 28458.94 3977.29 3148.61 In light of the changes in writes from reclaim context, the number of reads and Dave Chinner's concerns about IO performance I took a closer look at the IO stats for the test disk. Few observations 1. The average queue size is reduced by the initial series and roughly the same with this follow up. 2. Average wait times for writes are reduced and as the IO is completing faster it at least implies that the gain is because flushers are writing the files efficiently instead of page reclaim getting in the way. 3. The reduction in maximum write latency is staggering. 28 seconds down to 3 seconds. Jan Kara asked how NFS is affected by all of this. Unstable pages can be taken into account as one of the patches in the series shows but it is still the case that filesystems with unusual handling of dirty or writeback could still be treated better. Tests like postmark, fsmark and largedd showed up nothing useful. On my test setup, pages are simply not being written back from reclaim context with or without the patches and there are no changes in performance. My test setup probably is just not strong enough network-wise to be really interesting. I ran a longer-lived memcached test with IO going to NFS instead of a local disk parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%) Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%) Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%) Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%) Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%) Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%) Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%) Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%) Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%) Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%) Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%) Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%) Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%) Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%) Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%) Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%) Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%) Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%) 1. Performance does not collapse due to IO which is good. IO is also completing faster. Note with mmotm, IO completes in a third of the time and faster again with this series applied 2. Swapping is reduced, although not eliminated. The figures for the follow-up look bad but it does vary a bit as the stalling is not perfect for nfs or filesystems like ext3 with unusual handling of dirty and writeback pages 3. There are swapins, particularly with larger amounts of IO indicating that active pages are being reclaimed. However, the number of much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 36339175 35025445 35219699 Major Faults 310964 27108 51887 Swap Ins 2176399 173069 333316 Swap Outs 3344050 357228 504824 Direct pages scanned 8972 77283 43242 Kswapd pages scanned 20899983 8939566 14772851 Kswapd pages reclaimed 6193156 5172605 5231026 Direct pages reclaimed 8450 73802 39514 Kswapd efficiency 29% 57% 35% Kswapd velocity 3929.743 1847.499 3058.840 Direct efficiency 94% 95% 91% Direct velocity 1.687 15.972 8.954 Percentage direct scans 0% 0% 0% Zone normal velocity 3721.907 939.103 2185.142 Zone dma32 velocity 209.522 924.368 882.651 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 4082185.000 526319.000 537114.000 Page writes file 738135 169091 32290 Page writes anon 3344050 357228 504824 Page reclaim immediate 9524 170 5595843 Sector Reads 8909900 861192 1483680 Sector Writes 13428980 1488744 2076800 Page rescued immediate 0 0 0 Slabs scanned 38016 31744 28672 Direct inode steals 0 0 0 Kswapd inode steals 424 0 0 Kswapd skipped wait 0 0 0 THP fault alloc 14 15 119 THP collapse alloc 1767 1569 1618 THP splits 30 29 25 THP fault fallback 0 0 0 THP collapse fail 8 5 0 Compaction stalls 17 41 100 Compaction success 7 31 95 Compaction failures 10 10 5 Page migrate success 7083 22157 62217 Page migrate failure 0 0 0 Compaction pages isolated 14847 48758 135830 Compaction migrate scanned 18328 48398 138929 Compaction free scanned 2000255 355827 1720269 Compaction cost 7 24 68 I guess the main takeaway again is the much reduced page writes from reclaim context and reduced reads. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 23.58 0.35 0.44 Mean sda-await 133.47 15.72 15.46 Mean sda-r_await 4.72 4.69 3.95 Mean sda-w_await 507.69 28.40 33.68 Max sda-avgqz 680.60 12.25 23.14 Max sda-await 3958.89 221.83 286.22 Max sda-r_await 63.86 61.23 67.29 Max sda-w_await 11710.38 883.57 1767.28 And as before, write wait times are much reduced. This patch: The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority" decides whether to writeback pages from reclaim context based on the number of dirty pages encountered. This situation is flagged too easily and flushers are not given the chance to catch up resulting in more pages being written from reclaim context and potentially impacting IO performance. The check for PageWriteback is also misplaced as it happens within a PageDirty check which is nonsense as the dirty may have been cleared for IO. The accounting is updated very late and pages that are already under writeback, were reactivated, could not unmapped or could not be released are all missed. Similarly, a page is considered congested for reasons other than being congested and pages that cannot be written out in the correct context are skipped. Finally, it considers stalling and writing back filesystem pages due to encountering dirty anonymous pages at the tail of the LRU which is dumb. This patch causes kswapd to begin writing filesystem pages from reclaim context only if page reclaim found that all filesystem pages at the tail of the LRU were unqueued dirty pages. Before it starts writing filesystem pages, it will stall to give flushers a chance to catch up. The decision on whether wait_iff_congested is also now determined by dirty filesystem pages only. Congested pages are based on whether the underlying BDI is congested regardless of the context of the reclaiming process. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:57 +07:00
}
/*
* shrink_page_list() returns the number of reclaimed pages
*/
static unsigned long shrink_page_list(struct list_head *page_list,
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
struct pglist_data *pgdat,
struct scan_control *sc,
enum ttu_flags ttu_flags,
unsigned long *ret_nr_dirty,
unsigned long *ret_nr_unqueued_dirty,
unsigned long *ret_nr_congested,
unsigned long *ret_nr_writeback,
unsigned long *ret_nr_immediate,
bool force_reclaim)
{
LIST_HEAD(ret_pages);
LIST_HEAD(free_pages);
int pgactivate = 0;
unsigned long nr_unqueued_dirty = 0;
unsigned long nr_dirty = 0;
unsigned long nr_congested = 0;
unsigned long nr_reclaimed = 0;
mm: vmscan: throttle reclaim if encountering too many dirty pages under writeback Workloads that are allocating frequently and writing files place a large number of dirty pages on the LRU. With use-once logic, it is possible for them to reach the end of the LRU quickly requiring the reclaimer to scan more to find clean pages. Ordinarily, processes that are dirtying memory will get throttled by dirty balancing but this is a global heuristic and does not take into account that LRUs are maintained on a per-zone basis. This can lead to a situation whereby reclaim is scanning heavily, skipping over a large number of pages under writeback and recycling them around the LRU consuming CPU. This patch checks how many of the number of pages isolated from the LRU were dirty and under writeback. If a percentage of them under writeback, the process will be throttled if a backing device or the zone is congested. Note that this applies whether it is anonymous or file-backed pages that are under writeback meaning that swapping is potentially throttled. This is intentional due to the fact if the swap device is congested, scanning more pages and dispatching more IO is not going to help matters. The percentage that must be in writeback depends on the priority. At default priority, all of them must be dirty. At DEF_PRIORITY-1, 50% of them must be, DEF_PRIORITY-2, 25% etc. i.e. as pressure increases the greater the likelihood the process will get throttled to allow the flusher threads to make some progress. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 07:07:56 +07:00
unsigned long nr_writeback = 0;
unsigned long nr_immediate = 0;
cond_resched();
while (!list_empty(page_list)) {
struct address_space *mapping;
struct page *page;
int may_enter_fs;
enum page_references references = PAGEREF_RECLAIM_CLEAN;
mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered Further testing of the "Reduce system disruption due to kswapd" discovered a few problems. First and foremost, it's possible for pages under writeback to be freed which will lead to badness. Second, as pages were not being swapped the file LRU was being scanned faster and clean file pages were being reclaimed. In some cases this results in increased read IO to re-read data from disk. Third, more pages were being written from kswapd context which can adversly affect IO performance. Lastly, it was observed that PageDirty pages are not necessarily dirty on all filesystems (buffers can be clean while PageDirty is set and ->writepage generates no IO) and not all filesystems set PageWriteback when the page is being written (e.g. ext3). This disconnect confuses the reclaim stalling logic. This follow-up series is aimed at these problems. The tests were based on three kernels vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to kswapd" applied on top as per what should be in Andrew's tree right now lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel The first test used memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service. It starts with no background IO on a freshly created ext4 filesystem and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%) Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%) Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%) Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%) Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%) Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%) Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%) Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%) Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%) Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%) Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%) Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%) Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%) memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 23K/sec to just over 4K/second when there is 2385M of IO going on in the background. With current mmotm, there is no collapse in performance and with this follow-up series there is little change. swaptotal is the total amount of swap traffic. With mmotm and the follow-up series, the total amount of swapping is much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 11160152 10706748 10622316 Major Faults 46305 755 678 Swap Ins 260249 0 0 Swap Outs 683860 18 18 Direct pages scanned 0 678 2520 Kswapd pages scanned 6046108 8814900 1639279 Kswapd pages reclaimed 1081954 1172267 1094635 Direct pages reclaimed 0 566 2304 Kswapd efficiency 17% 13% 66% Kswapd velocity 5217.560 7618.953 1414.879 Direct efficiency 100% 83% 91% Direct velocity 0.000 0.586 2.175 Percentage direct scans 0% 0% 0% Zone normal velocity 5105.086 6824.681 671.158 Zone dma32 velocity 112.473 794.858 745.896 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 1929612.000 6861768.000 32821.000 Page writes file 1245752 6861750 32803 Page writes anon 683860 18 18 Page reclaim immediate 7484 40 239 Sector Reads 1130320 93996 86900 Sector Writes 13508052 10823500 11804436 Page rescued immediate 0 0 0 Slabs scanned 33536 27136 18560 Direct inode steals 0 0 0 Kswapd inode steals 8641 1035 0 Kswapd skipped wait 0 0 0 THP fault alloc 8 37 33 THP collapse alloc 508 552 515 THP splits 24 1 1 THP fault fallback 0 0 0 THP collapse fail 0 0 0 There are a number of observations to make here 1. Swap outs are almost eliminated. Swap ins are 0 indicating that the pages swapped were really unused anonymous pages. Related to that, major faults are much reduced. 2. kswapd efficiency was impacted by the initial series but with these follow-up patches, the efficiency is now at 66% indicating that far fewer pages were skipped during scanning due to dirty or writeback pages. 3. kswapd velocity is reduced indicating that fewer pages are being scanned with the follow-up series as kswapd now stalls when the tail of the LRU queue is full of unqueued dirty pages. The stall gives flushers a chance to catch-up so kswapd can reclaim clean pages when it wakes 4. In light of Zlatko's recent reports about zone scanning imbalances, mmtests now reports scanning velocity on a per-zone basis. With mainline, you can see that the scanning activity is dominated by the Normal zone with over 45 times more scanning in Normal than the DMA32 zone. With the series currently in mmotm, the ratio is slightly better but it is still the case that the bulk of scanning is in the highest zone. With this follow-up series, the ratio of scanning between the Normal and DMA32 zone is roughly equal. 5. As Dave Chinner observed, the current patches in mmotm increased the number of pages written from kswapd context which is expected to adversly impact IO performance. With the follow-up patches, far fewer pages are written from kswapd context than the mainline kernel 6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With the follow-up series, there is less slab shrinking activity and no inodes were reclaimed. 7. Note that "Sectors Read" is drastically reduced implying that the source data being used for the IO is not being aggressively discarded due to page reclaim skipping over dirty pages and reclaiming clean pages. Note that the reducion in reads could also be due to inode data not being re-read from disk after a slab shrink. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 166.99 32.09 33.44 Mean sda-await 853.64 192.76 185.43 Mean sda-r_await 6.31 9.24 5.97 Mean sda-w_await 2992.81 202.65 192.43 Max sda-avgqz 1409.91 718.75 698.98 Max sda-await 6665.74 3538.00 3124.23 Max sda-r_await 58.96 111.95 58.00 Max sda-w_await 28458.94 3977.29 3148.61 In light of the changes in writes from reclaim context, the number of reads and Dave Chinner's concerns about IO performance I took a closer look at the IO stats for the test disk. Few observations 1. The average queue size is reduced by the initial series and roughly the same with this follow up. 2. Average wait times for writes are reduced and as the IO is completing faster it at least implies that the gain is because flushers are writing the files efficiently instead of page reclaim getting in the way. 3. The reduction in maximum write latency is staggering. 28 seconds down to 3 seconds. Jan Kara asked how NFS is affected by all of this. Unstable pages can be taken into account as one of the patches in the series shows but it is still the case that filesystems with unusual handling of dirty or writeback could still be treated better. Tests like postmark, fsmark and largedd showed up nothing useful. On my test setup, pages are simply not being written back from reclaim context with or without the patches and there are no changes in performance. My test setup probably is just not strong enough network-wise to be really interesting. I ran a longer-lived memcached test with IO going to NFS instead of a local disk parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%) Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%) Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%) Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%) Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%) Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%) Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%) Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%) Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%) Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%) Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%) Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%) Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%) Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%) Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%) Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%) Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%) Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%) 1. Performance does not collapse due to IO which is good. IO is also completing faster. Note with mmotm, IO completes in a third of the time and faster again with this series applied 2. Swapping is reduced, although not eliminated. The figures for the follow-up look bad but it does vary a bit as the stalling is not perfect for nfs or filesystems like ext3 with unusual handling of dirty and writeback pages 3. There are swapins, particularly with larger amounts of IO indicating that active pages are being reclaimed. However, the number of much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 36339175 35025445 35219699 Major Faults 310964 27108 51887 Swap Ins 2176399 173069 333316 Swap Outs 3344050 357228 504824 Direct pages scanned 8972 77283 43242 Kswapd pages scanned 20899983 8939566 14772851 Kswapd pages reclaimed 6193156 5172605 5231026 Direct pages reclaimed 8450 73802 39514 Kswapd efficiency 29% 57% 35% Kswapd velocity 3929.743 1847.499 3058.840 Direct efficiency 94% 95% 91% Direct velocity 1.687 15.972 8.954 Percentage direct scans 0% 0% 0% Zone normal velocity 3721.907 939.103 2185.142 Zone dma32 velocity 209.522 924.368 882.651 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 4082185.000 526319.000 537114.000 Page writes file 738135 169091 32290 Page writes anon 3344050 357228 504824 Page reclaim immediate 9524 170 5595843 Sector Reads 8909900 861192 1483680 Sector Writes 13428980 1488744 2076800 Page rescued immediate 0 0 0 Slabs scanned 38016 31744 28672 Direct inode steals 0 0 0 Kswapd inode steals 424 0 0 Kswapd skipped wait 0 0 0 THP fault alloc 14 15 119 THP collapse alloc 1767 1569 1618 THP splits 30 29 25 THP fault fallback 0 0 0 THP collapse fail 8 5 0 Compaction stalls 17 41 100 Compaction success 7 31 95 Compaction failures 10 10 5 Page migrate success 7083 22157 62217 Page migrate failure 0 0 0 Compaction pages isolated 14847 48758 135830 Compaction migrate scanned 18328 48398 138929 Compaction free scanned 2000255 355827 1720269 Compaction cost 7 24 68 I guess the main takeaway again is the much reduced page writes from reclaim context and reduced reads. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 23.58 0.35 0.44 Mean sda-await 133.47 15.72 15.46 Mean sda-r_await 4.72 4.69 3.95 Mean sda-w_await 507.69 28.40 33.68 Max sda-avgqz 680.60 12.25 23.14 Max sda-await 3958.89 221.83 286.22 Max sda-r_await 63.86 61.23 67.29 Max sda-w_await 11710.38 883.57 1767.28 And as before, write wait times are much reduced. This patch: The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority" decides whether to writeback pages from reclaim context based on the number of dirty pages encountered. This situation is flagged too easily and flushers are not given the chance to catch up resulting in more pages being written from reclaim context and potentially impacting IO performance. The check for PageWriteback is also misplaced as it happens within a PageDirty check which is nonsense as the dirty may have been cleared for IO. The accounting is updated very late and pages that are already under writeback, were reactivated, could not unmapped or could not be released are all missed. Similarly, a page is considered congested for reasons other than being congested and pages that cannot be written out in the correct context are skipped. Finally, it considers stalling and writing back filesystem pages due to encountering dirty anonymous pages at the tail of the LRU which is dumb. This patch causes kswapd to begin writing filesystem pages from reclaim context only if page reclaim found that all filesystem pages at the tail of the LRU were unqueued dirty pages. Before it starts writing filesystem pages, it will stall to give flushers a chance to catch up. The decision on whether wait_iff_congested is also now determined by dirty filesystem pages only. Congested pages are based on whether the underlying BDI is congested regardless of the context of the reclaiming process. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:57 +07:00
bool dirty, writeback;
mm: support madvise(MADV_FREE) Linux doesn't have an ability to free pages lazy while other OS already have been supported that named by madvise(MADV_FREE). The gain is clear that kernel can discard freed pages rather than swapping out or OOM if memory pressure happens. Without memory pressure, freed pages would be reused by userspace without another additional overhead(ex, page fault + allocation + zeroing). Jason Evans said: : Facebook has been using MAP_UNINITIALIZED : (https://lkml.org/lkml/2012/1/18/308) in some of its applications for : several years, but there are operational costs to maintaining this : out-of-tree in our kernel and in jemalloc, and we are anxious to retire it : in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it : increased throughput for much of our workload by ~5%, and although the : benefit has decreased using newer hardware and kernels, there is still : enough benefit that we cannot reasonably retire it without a replacement. : : Aside from Facebook operations, there are numerous broadly used : applications that would benefit from MADV_FREE. The ones that immediately : come to mind are redis, varnish, and MariaDB. I don't have much insight : into Android internals and development process, but I would hope to see : MADV_FREE support eventually end up there as well to benefit applications : linked with the integrated jemalloc. : : jemalloc will use MADV_FREE once it becomes available in the Linux kernel. : In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's : available: *BSD, OS X, Windows, and Solaris -- every platform except Linux : (and AIX, but I'm not sure it even compiles on AIX). The lack of : MADV_FREE on Linux forced me down a long series of increasingly : sophisticated heuristics for madvise() volume reduction, and even so this : remains a common performance issue for people using jemalloc on Linux. : Please integrate MADV_FREE; many people will benefit substantially. How it works: When madvise syscall is called, VM clears dirty bit of ptes of the range. If memory pressure happens, VM checks dirty bit of page table and if it found still "clean", it means it's a "lazyfree pages" so VM could discard the page instead of swapping out. Once there was store operation for the page before VM peek a page to reclaim, dirty bit is set so VM can swap out the page instead of discarding. One thing we should notice is that basically, MADV_FREE relies on dirty bit in page table entry to decide whether VM allows to discard the page or not. IOW, if page table entry includes marked dirty bit, VM shouldn't discard the page. However, as a example, if swap-in by read fault happens, page table entry doesn't have dirty bit so MADV_FREE could discard the page wrongly. For avoiding the problem, MADV_FREE did more checks with PageDirty and PageSwapCache. It worked out because swapped-in page lives on swap cache and since it is evicted from the swap cache, the page has PG_dirty flag. So both page flags check effectively prevent wrong discarding by MADV_FREE. However, a problem in above logic is that swapped-in page has PG_dirty still after they are removed from swap cache so VM cannot consider the page as freeable any more even if madvise_free is called in future. Look at below example for detail. ptr = malloc(); memset(ptr); .. .. .. heavy memory pressure so all of pages are swapped out .. .. var = *ptr; -> a page swapped-in and could be removed from swapcache. Then, page table doesn't mark dirty bit and page descriptor includes PG_dirty .. .. madvise_free(ptr); -> It doesn't clear PG_dirty of the page. .. .. .. .. heavy memory pressure again. .. In this time, VM cannot discard the page because the page .. has *PG_dirty* To solve the problem, this patch clears PG_dirty if only the page is owned exclusively by current process when madvise is called because PG_dirty represents ptes's dirtiness in several processes so we could clear it only if we own it exclusively. Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc and hope glibc supports it) and jemalloc/tcmalloc already have supported the feature for other OS(ex, FreeBSD) barrios@blaptop:~/benchmark/ebizzy$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 12 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 2 Stepping: 3 CPU MHz: 3200.185 BogoMIPS: 6400.53 Virtualization: VT-x Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 32K L2 cache: 4096K NUMA node0 CPU(s): 0-11 ebizzy benchmark(./ebizzy -S 10 -n 512) Higher avg is better. vanilla-jemalloc MADV_free-jemalloc 1 thread records: 10 records: 10 avg: 2961.90 avg: 12069.70 std: 71.96(2.43%) std: 186.68(1.55%) max: 3070.00 max: 12385.00 min: 2796.00 min: 11746.00 2 thread records: 10 records: 10 avg: 5020.00 avg: 17827.00 std: 264.87(5.28%) std: 358.52(2.01%) max: 5244.00 max: 18760.00 min: 4251.00 min: 17382.00 4 thread records: 10 records: 10 avg: 8988.80 avg: 27930.80 std: 1175.33(13.08%) std: 3317.33(11.88%) max: 9508.00 max: 30879.00 min: 5477.00 min: 21024.00 8 thread records: 10 records: 10 avg: 13036.50 avg: 33739.40 std: 170.67(1.31%) std: 5146.22(15.25%) max: 13371.00 max: 40572.00 min: 12785.00 min: 24088.00 16 thread records: 10 records: 10 avg: 11092.40 avg: 31424.20 std: 710.60(6.41%) std: 3763.89(11.98%) max: 12446.00 max: 36635.00 min: 9949.00 min: 25669.00 32 thread records: 10 records: 10 avg: 11067.00 avg: 34495.80 std: 971.06(8.77%) std: 2721.36(7.89%) max: 12010.00 max: 38598.00 min: 9002.00 min: 30636.00 In summary, MADV_FREE is about much faster than MADV_DONTNEED. This patch (of 12): Add core MADV_FREE implementation. [akpm@linux-foundation.org: small cleanups] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jason Evans <je@fb.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Shaohua Li" <shli@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:54:53 +07:00
bool lazyfree = false;
int ret = SWAP_SUCCESS;
cond_resched();
page = lru_to_page(page_list);
list_del(&page->lru);
if (!trylock_page(page))
goto keep;
VM_BUG_ON_PAGE(PageActive(page), page);
sc->nr_scanned++;
if (unlikely(!page_evictable(page)))
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:44 +07:00
goto cull_mlocked;
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
if (!sc->may_unmap && page_mapped(page))
goto keep_locked;
/* Double the slab pressure for mapped and swapcache pages */
if (page_mapped(page) || PageSwapCache(page))
sc->nr_scanned++;
may_enter_fs = (sc->gfp_mask & __GFP_FS) ||
(PageSwapCache(page) && (sc->gfp_mask & __GFP_IO));
mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered Further testing of the "Reduce system disruption due to kswapd" discovered a few problems. First and foremost, it's possible for pages under writeback to be freed which will lead to badness. Second, as pages were not being swapped the file LRU was being scanned faster and clean file pages were being reclaimed. In some cases this results in increased read IO to re-read data from disk. Third, more pages were being written from kswapd context which can adversly affect IO performance. Lastly, it was observed that PageDirty pages are not necessarily dirty on all filesystems (buffers can be clean while PageDirty is set and ->writepage generates no IO) and not all filesystems set PageWriteback when the page is being written (e.g. ext3). This disconnect confuses the reclaim stalling logic. This follow-up series is aimed at these problems. The tests were based on three kernels vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to kswapd" applied on top as per what should be in Andrew's tree right now lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel The first test used memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service. It starts with no background IO on a freshly created ext4 filesystem and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%) Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%) Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%) Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%) Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%) Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%) Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%) Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%) Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%) Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%) Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%) Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%) Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%) memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 23K/sec to just over 4K/second when there is 2385M of IO going on in the background. With current mmotm, there is no collapse in performance and with this follow-up series there is little change. swaptotal is the total amount of swap traffic. With mmotm and the follow-up series, the total amount of swapping is much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 11160152 10706748 10622316 Major Faults 46305 755 678 Swap Ins 260249 0 0 Swap Outs 683860 18 18 Direct pages scanned 0 678 2520 Kswapd pages scanned 6046108 8814900 1639279 Kswapd pages reclaimed 1081954 1172267 1094635 Direct pages reclaimed 0 566 2304 Kswapd efficiency 17% 13% 66% Kswapd velocity 5217.560 7618.953 1414.879 Direct efficiency 100% 83% 91% Direct velocity 0.000 0.586 2.175 Percentage direct scans 0% 0% 0% Zone normal velocity 5105.086 6824.681 671.158 Zone dma32 velocity 112.473 794.858 745.896 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 1929612.000 6861768.000 32821.000 Page writes file 1245752 6861750 32803 Page writes anon 683860 18 18 Page reclaim immediate 7484 40 239 Sector Reads 1130320 93996 86900 Sector Writes 13508052 10823500 11804436 Page rescued immediate 0 0 0 Slabs scanned 33536 27136 18560 Direct inode steals 0 0 0 Kswapd inode steals 8641 1035 0 Kswapd skipped wait 0 0 0 THP fault alloc 8 37 33 THP collapse alloc 508 552 515 THP splits 24 1 1 THP fault fallback 0 0 0 THP collapse fail 0 0 0 There are a number of observations to make here 1. Swap outs are almost eliminated. Swap ins are 0 indicating that the pages swapped were really unused anonymous pages. Related to that, major faults are much reduced. 2. kswapd efficiency was impacted by the initial series but with these follow-up patches, the efficiency is now at 66% indicating that far fewer pages were skipped during scanning due to dirty or writeback pages. 3. kswapd velocity is reduced indicating that fewer pages are being scanned with the follow-up series as kswapd now stalls when the tail of the LRU queue is full of unqueued dirty pages. The stall gives flushers a chance to catch-up so kswapd can reclaim clean pages when it wakes 4. In light of Zlatko's recent reports about zone scanning imbalances, mmtests now reports scanning velocity on a per-zone basis. With mainline, you can see that the scanning activity is dominated by the Normal zone with over 45 times more scanning in Normal than the DMA32 zone. With the series currently in mmotm, the ratio is slightly better but it is still the case that the bulk of scanning is in the highest zone. With this follow-up series, the ratio of scanning between the Normal and DMA32 zone is roughly equal. 5. As Dave Chinner observed, the current patches in mmotm increased the number of pages written from kswapd context which is expected to adversly impact IO performance. With the follow-up patches, far fewer pages are written from kswapd context than the mainline kernel 6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With the follow-up series, there is less slab shrinking activity and no inodes were reclaimed. 7. Note that "Sectors Read" is drastically reduced implying that the source data being used for the IO is not being aggressively discarded due to page reclaim skipping over dirty pages and reclaiming clean pages. Note that the reducion in reads could also be due to inode data not being re-read from disk after a slab shrink. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 166.99 32.09 33.44 Mean sda-await 853.64 192.76 185.43 Mean sda-r_await 6.31 9.24 5.97 Mean sda-w_await 2992.81 202.65 192.43 Max sda-avgqz 1409.91 718.75 698.98 Max sda-await 6665.74 3538.00 3124.23 Max sda-r_await 58.96 111.95 58.00 Max sda-w_await 28458.94 3977.29 3148.61 In light of the changes in writes from reclaim context, the number of reads and Dave Chinner's concerns about IO performance I took a closer look at the IO stats for the test disk. Few observations 1. The average queue size is reduced by the initial series and roughly the same with this follow up. 2. Average wait times for writes are reduced and as the IO is completing faster it at least implies that the gain is because flushers are writing the files efficiently instead of page reclaim getting in the way. 3. The reduction in maximum write latency is staggering. 28 seconds down to 3 seconds. Jan Kara asked how NFS is affected by all of this. Unstable pages can be taken into account as one of the patches in the series shows but it is still the case that filesystems with unusual handling of dirty or writeback could still be treated better. Tests like postmark, fsmark and largedd showed up nothing useful. On my test setup, pages are simply not being written back from reclaim context with or without the patches and there are no changes in performance. My test setup probably is just not strong enough network-wise to be really interesting. I ran a longer-lived memcached test with IO going to NFS instead of a local disk parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%) Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%) Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%) Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%) Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%) Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%) Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%) Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%) Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%) Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%) Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%) Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%) Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%) Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%) Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%) Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%) Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%) Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%) 1. Performance does not collapse due to IO which is good. IO is also completing faster. Note with mmotm, IO completes in a third of the time and faster again with this series applied 2. Swapping is reduced, although not eliminated. The figures for the follow-up look bad but it does vary a bit as the stalling is not perfect for nfs or filesystems like ext3 with unusual handling of dirty and writeback pages 3. There are swapins, particularly with larger amounts of IO indicating that active pages are being reclaimed. However, the number of much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 36339175 35025445 35219699 Major Faults 310964 27108 51887 Swap Ins 2176399 173069 333316 Swap Outs 3344050 357228 504824 Direct pages scanned 8972 77283 43242 Kswapd pages scanned 20899983 8939566 14772851 Kswapd pages reclaimed 6193156 5172605 5231026 Direct pages reclaimed 8450 73802 39514 Kswapd efficiency 29% 57% 35% Kswapd velocity 3929.743 1847.499 3058.840 Direct efficiency 94% 95% 91% Direct velocity 1.687 15.972 8.954 Percentage direct scans 0% 0% 0% Zone normal velocity 3721.907 939.103 2185.142 Zone dma32 velocity 209.522 924.368 882.651 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 4082185.000 526319.000 537114.000 Page writes file 738135 169091 32290 Page writes anon 3344050 357228 504824 Page reclaim immediate 9524 170 5595843 Sector Reads 8909900 861192 1483680 Sector Writes 13428980 1488744 2076800 Page rescued immediate 0 0 0 Slabs scanned 38016 31744 28672 Direct inode steals 0 0 0 Kswapd inode steals 424 0 0 Kswapd skipped wait 0 0 0 THP fault alloc 14 15 119 THP collapse alloc 1767 1569 1618 THP splits 30 29 25 THP fault fallback 0 0 0 THP collapse fail 8 5 0 Compaction stalls 17 41 100 Compaction success 7 31 95 Compaction failures 10 10 5 Page migrate success 7083 22157 62217 Page migrate failure 0 0 0 Compaction pages isolated 14847 48758 135830 Compaction migrate scanned 18328 48398 138929 Compaction free scanned 2000255 355827 1720269 Compaction cost 7 24 68 I guess the main takeaway again is the much reduced page writes from reclaim context and reduced reads. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 23.58 0.35 0.44 Mean sda-await 133.47 15.72 15.46 Mean sda-r_await 4.72 4.69 3.95 Mean sda-w_await 507.69 28.40 33.68 Max sda-avgqz 680.60 12.25 23.14 Max sda-await 3958.89 221.83 286.22 Max sda-r_await 63.86 61.23 67.29 Max sda-w_await 11710.38 883.57 1767.28 And as before, write wait times are much reduced. This patch: The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority" decides whether to writeback pages from reclaim context based on the number of dirty pages encountered. This situation is flagged too easily and flushers are not given the chance to catch up resulting in more pages being written from reclaim context and potentially impacting IO performance. The check for PageWriteback is also misplaced as it happens within a PageDirty check which is nonsense as the dirty may have been cleared for IO. The accounting is updated very late and pages that are already under writeback, were reactivated, could not unmapped or could not be released are all missed. Similarly, a page is considered congested for reasons other than being congested and pages that cannot be written out in the correct context are skipped. Finally, it considers stalling and writing back filesystem pages due to encountering dirty anonymous pages at the tail of the LRU which is dumb. This patch causes kswapd to begin writing filesystem pages from reclaim context only if page reclaim found that all filesystem pages at the tail of the LRU were unqueued dirty pages. Before it starts writing filesystem pages, it will stall to give flushers a chance to catch up. The decision on whether wait_iff_congested is also now determined by dirty filesystem pages only. Congested pages are based on whether the underlying BDI is congested regardless of the context of the reclaiming process. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:57 +07:00
/*
* The number of dirty pages determines if a zone is marked
* reclaim_congested which affects wait_iff_congested. kswapd
* will stall and start writing pages if the tail of the LRU
* is all dirty unqueued pages.
*/
page_check_dirty_writeback(page, &dirty, &writeback);
if (dirty || writeback)
nr_dirty++;
if (dirty && !writeback)
nr_unqueued_dirty++;
/*
* Treat this page as congested if the underlying BDI is or if
* pages are cycling through the LRU so quickly that the
* pages marked for immediate reclaim are making it to the
* end of the LRU a second time.
*/
mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered Further testing of the "Reduce system disruption due to kswapd" discovered a few problems. First and foremost, it's possible for pages under writeback to be freed which will lead to badness. Second, as pages were not being swapped the file LRU was being scanned faster and clean file pages were being reclaimed. In some cases this results in increased read IO to re-read data from disk. Third, more pages were being written from kswapd context which can adversly affect IO performance. Lastly, it was observed that PageDirty pages are not necessarily dirty on all filesystems (buffers can be clean while PageDirty is set and ->writepage generates no IO) and not all filesystems set PageWriteback when the page is being written (e.g. ext3). This disconnect confuses the reclaim stalling logic. This follow-up series is aimed at these problems. The tests were based on three kernels vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to kswapd" applied on top as per what should be in Andrew's tree right now lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel The first test used memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service. It starts with no background IO on a freshly created ext4 filesystem and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%) Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%) Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%) Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%) Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%) Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%) Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%) Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%) Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%) Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%) Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%) Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%) Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%) memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 23K/sec to just over 4K/second when there is 2385M of IO going on in the background. With current mmotm, there is no collapse in performance and with this follow-up series there is little change. swaptotal is the total amount of swap traffic. With mmotm and the follow-up series, the total amount of swapping is much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 11160152 10706748 10622316 Major Faults 46305 755 678 Swap Ins 260249 0 0 Swap Outs 683860 18 18 Direct pages scanned 0 678 2520 Kswapd pages scanned 6046108 8814900 1639279 Kswapd pages reclaimed 1081954 1172267 1094635 Direct pages reclaimed 0 566 2304 Kswapd efficiency 17% 13% 66% Kswapd velocity 5217.560 7618.953 1414.879 Direct efficiency 100% 83% 91% Direct velocity 0.000 0.586 2.175 Percentage direct scans 0% 0% 0% Zone normal velocity 5105.086 6824.681 671.158 Zone dma32 velocity 112.473 794.858 745.896 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 1929612.000 6861768.000 32821.000 Page writes file 1245752 6861750 32803 Page writes anon 683860 18 18 Page reclaim immediate 7484 40 239 Sector Reads 1130320 93996 86900 Sector Writes 13508052 10823500 11804436 Page rescued immediate 0 0 0 Slabs scanned 33536 27136 18560 Direct inode steals 0 0 0 Kswapd inode steals 8641 1035 0 Kswapd skipped wait 0 0 0 THP fault alloc 8 37 33 THP collapse alloc 508 552 515 THP splits 24 1 1 THP fault fallback 0 0 0 THP collapse fail 0 0 0 There are a number of observations to make here 1. Swap outs are almost eliminated. Swap ins are 0 indicating that the pages swapped were really unused anonymous pages. Related to that, major faults are much reduced. 2. kswapd efficiency was impacted by the initial series but with these follow-up patches, the efficiency is now at 66% indicating that far fewer pages were skipped during scanning due to dirty or writeback pages. 3. kswapd velocity is reduced indicating that fewer pages are being scanned with the follow-up series as kswapd now stalls when the tail of the LRU queue is full of unqueued dirty pages. The stall gives flushers a chance to catch-up so kswapd can reclaim clean pages when it wakes 4. In light of Zlatko's recent reports about zone scanning imbalances, mmtests now reports scanning velocity on a per-zone basis. With mainline, you can see that the scanning activity is dominated by the Normal zone with over 45 times more scanning in Normal than the DMA32 zone. With the series currently in mmotm, the ratio is slightly better but it is still the case that the bulk of scanning is in the highest zone. With this follow-up series, the ratio of scanning between the Normal and DMA32 zone is roughly equal. 5. As Dave Chinner observed, the current patches in mmotm increased the number of pages written from kswapd context which is expected to adversly impact IO performance. With the follow-up patches, far fewer pages are written from kswapd context than the mainline kernel 6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With the follow-up series, there is less slab shrinking activity and no inodes were reclaimed. 7. Note that "Sectors Read" is drastically reduced implying that the source data being used for the IO is not being aggressively discarded due to page reclaim skipping over dirty pages and reclaiming clean pages. Note that the reducion in reads could also be due to inode data not being re-read from disk after a slab shrink. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 166.99 32.09 33.44 Mean sda-await 853.64 192.76 185.43 Mean sda-r_await 6.31 9.24 5.97 Mean sda-w_await 2992.81 202.65 192.43 Max sda-avgqz 1409.91 718.75 698.98 Max sda-await 6665.74 3538.00 3124.23 Max sda-r_await 58.96 111.95 58.00 Max sda-w_await 28458.94 3977.29 3148.61 In light of the changes in writes from reclaim context, the number of reads and Dave Chinner's concerns about IO performance I took a closer look at the IO stats for the test disk. Few observations 1. The average queue size is reduced by the initial series and roughly the same with this follow up. 2. Average wait times for writes are reduced and as the IO is completing faster it at least implies that the gain is because flushers are writing the files efficiently instead of page reclaim getting in the way. 3. The reduction in maximum write latency is staggering. 28 seconds down to 3 seconds. Jan Kara asked how NFS is affected by all of this. Unstable pages can be taken into account as one of the patches in the series shows but it is still the case that filesystems with unusual handling of dirty or writeback could still be treated better. Tests like postmark, fsmark and largedd showed up nothing useful. On my test setup, pages are simply not being written back from reclaim context with or without the patches and there are no changes in performance. My test setup probably is just not strong enough network-wise to be really interesting. I ran a longer-lived memcached test with IO going to NFS instead of a local disk parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%) Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%) Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%) Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%) Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%) Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%) Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%) Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%) Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%) Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%) Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%) Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%) Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%) Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%) Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%) Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%) Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%) Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%) 1. Performance does not collapse due to IO which is good. IO is also completing faster. Note with mmotm, IO completes in a third of the time and faster again with this series applied 2. Swapping is reduced, although not eliminated. The figures for the follow-up look bad but it does vary a bit as the stalling is not perfect for nfs or filesystems like ext3 with unusual handling of dirty and writeback pages 3. There are swapins, particularly with larger amounts of IO indicating that active pages are being reclaimed. However, the number of much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 36339175 35025445 35219699 Major Faults 310964 27108 51887 Swap Ins 2176399 173069 333316 Swap Outs 3344050 357228 504824 Direct pages scanned 8972 77283 43242 Kswapd pages scanned 20899983 8939566 14772851 Kswapd pages reclaimed 6193156 5172605 5231026 Direct pages reclaimed 8450 73802 39514 Kswapd efficiency 29% 57% 35% Kswapd velocity 3929.743 1847.499 3058.840 Direct efficiency 94% 95% 91% Direct velocity 1.687 15.972 8.954 Percentage direct scans 0% 0% 0% Zone normal velocity 3721.907 939.103 2185.142 Zone dma32 velocity 209.522 924.368 882.651 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 4082185.000 526319.000 537114.000 Page writes file 738135 169091 32290 Page writes anon 3344050 357228 504824 Page reclaim immediate 9524 170 5595843 Sector Reads 8909900 861192 1483680 Sector Writes 13428980 1488744 2076800 Page rescued immediate 0 0 0 Slabs scanned 38016 31744 28672 Direct inode steals 0 0 0 Kswapd inode steals 424 0 0 Kswapd skipped wait 0 0 0 THP fault alloc 14 15 119 THP collapse alloc 1767 1569 1618 THP splits 30 29 25 THP fault fallback 0 0 0 THP collapse fail 8 5 0 Compaction stalls 17 41 100 Compaction success 7 31 95 Compaction failures 10 10 5 Page migrate success 7083 22157 62217 Page migrate failure 0 0 0 Compaction pages isolated 14847 48758 135830 Compaction migrate scanned 18328 48398 138929 Compaction free scanned 2000255 355827 1720269 Compaction cost 7 24 68 I guess the main takeaway again is the much reduced page writes from reclaim context and reduced reads. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 23.58 0.35 0.44 Mean sda-await 133.47 15.72 15.46 Mean sda-r_await 4.72 4.69 3.95 Mean sda-w_await 507.69 28.40 33.68 Max sda-avgqz 680.60 12.25 23.14 Max sda-await 3958.89 221.83 286.22 Max sda-r_await 63.86 61.23 67.29 Max sda-w_await 11710.38 883.57 1767.28 And as before, write wait times are much reduced. This patch: The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority" decides whether to writeback pages from reclaim context based on the number of dirty pages encountered. This situation is flagged too easily and flushers are not given the chance to catch up resulting in more pages being written from reclaim context and potentially impacting IO performance. The check for PageWriteback is also misplaced as it happens within a PageDirty check which is nonsense as the dirty may have been cleared for IO. The accounting is updated very late and pages that are already under writeback, were reactivated, could not unmapped or could not be released are all missed. Similarly, a page is considered congested for reasons other than being congested and pages that cannot be written out in the correct context are skipped. Finally, it considers stalling and writing back filesystem pages due to encountering dirty anonymous pages at the tail of the LRU which is dumb. This patch causes kswapd to begin writing filesystem pages from reclaim context only if page reclaim found that all filesystem pages at the tail of the LRU were unqueued dirty pages. Before it starts writing filesystem pages, it will stall to give flushers a chance to catch up. The decision on whether wait_iff_congested is also now determined by dirty filesystem pages only. Congested pages are based on whether the underlying BDI is congested regardless of the context of the reclaiming process. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:57 +07:00
mapping = page_mapping(page);
if (((dirty || writeback) && mapping &&
inode_write_congested(mapping->host)) ||
(writeback && PageReclaim(page)))
mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered Further testing of the "Reduce system disruption due to kswapd" discovered a few problems. First and foremost, it's possible for pages under writeback to be freed which will lead to badness. Second, as pages were not being swapped the file LRU was being scanned faster and clean file pages were being reclaimed. In some cases this results in increased read IO to re-read data from disk. Third, more pages were being written from kswapd context which can adversly affect IO performance. Lastly, it was observed that PageDirty pages are not necessarily dirty on all filesystems (buffers can be clean while PageDirty is set and ->writepage generates no IO) and not all filesystems set PageWriteback when the page is being written (e.g. ext3). This disconnect confuses the reclaim stalling logic. This follow-up series is aimed at these problems. The tests were based on three kernels vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to kswapd" applied on top as per what should be in Andrew's tree right now lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel The first test used memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service. It starts with no background IO on a freshly created ext4 filesystem and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%) Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%) Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%) Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%) Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%) Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%) Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%) Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%) Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%) Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%) Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%) Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%) Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%) memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 23K/sec to just over 4K/second when there is 2385M of IO going on in the background. With current mmotm, there is no collapse in performance and with this follow-up series there is little change. swaptotal is the total amount of swap traffic. With mmotm and the follow-up series, the total amount of swapping is much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 11160152 10706748 10622316 Major Faults 46305 755 678 Swap Ins 260249 0 0 Swap Outs 683860 18 18 Direct pages scanned 0 678 2520 Kswapd pages scanned 6046108 8814900 1639279 Kswapd pages reclaimed 1081954 1172267 1094635 Direct pages reclaimed 0 566 2304 Kswapd efficiency 17% 13% 66% Kswapd velocity 5217.560 7618.953 1414.879 Direct efficiency 100% 83% 91% Direct velocity 0.000 0.586 2.175 Percentage direct scans 0% 0% 0% Zone normal velocity 5105.086 6824.681 671.158 Zone dma32 velocity 112.473 794.858 745.896 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 1929612.000 6861768.000 32821.000 Page writes file 1245752 6861750 32803 Page writes anon 683860 18 18 Page reclaim immediate 7484 40 239 Sector Reads 1130320 93996 86900 Sector Writes 13508052 10823500 11804436 Page rescued immediate 0 0 0 Slabs scanned 33536 27136 18560 Direct inode steals 0 0 0 Kswapd inode steals 8641 1035 0 Kswapd skipped wait 0 0 0 THP fault alloc 8 37 33 THP collapse alloc 508 552 515 THP splits 24 1 1 THP fault fallback 0 0 0 THP collapse fail 0 0 0 There are a number of observations to make here 1. Swap outs are almost eliminated. Swap ins are 0 indicating that the pages swapped were really unused anonymous pages. Related to that, major faults are much reduced. 2. kswapd efficiency was impacted by the initial series but with these follow-up patches, the efficiency is now at 66% indicating that far fewer pages were skipped during scanning due to dirty or writeback pages. 3. kswapd velocity is reduced indicating that fewer pages are being scanned with the follow-up series as kswapd now stalls when the tail of the LRU queue is full of unqueued dirty pages. The stall gives flushers a chance to catch-up so kswapd can reclaim clean pages when it wakes 4. In light of Zlatko's recent reports about zone scanning imbalances, mmtests now reports scanning velocity on a per-zone basis. With mainline, you can see that the scanning activity is dominated by the Normal zone with over 45 times more scanning in Normal than the DMA32 zone. With the series currently in mmotm, the ratio is slightly better but it is still the case that the bulk of scanning is in the highest zone. With this follow-up series, the ratio of scanning between the Normal and DMA32 zone is roughly equal. 5. As Dave Chinner observed, the current patches in mmotm increased the number of pages written from kswapd context which is expected to adversly impact IO performance. With the follow-up patches, far fewer pages are written from kswapd context than the mainline kernel 6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With the follow-up series, there is less slab shrinking activity and no inodes were reclaimed. 7. Note that "Sectors Read" is drastically reduced implying that the source data being used for the IO is not being aggressively discarded due to page reclaim skipping over dirty pages and reclaiming clean pages. Note that the reducion in reads could also be due to inode data not being re-read from disk after a slab shrink. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 166.99 32.09 33.44 Mean sda-await 853.64 192.76 185.43 Mean sda-r_await 6.31 9.24 5.97 Mean sda-w_await 2992.81 202.65 192.43 Max sda-avgqz 1409.91 718.75 698.98 Max sda-await 6665.74 3538.00 3124.23 Max sda-r_await 58.96 111.95 58.00 Max sda-w_await 28458.94 3977.29 3148.61 In light of the changes in writes from reclaim context, the number of reads and Dave Chinner's concerns about IO performance I took a closer look at the IO stats for the test disk. Few observations 1. The average queue size is reduced by the initial series and roughly the same with this follow up. 2. Average wait times for writes are reduced and as the IO is completing faster it at least implies that the gain is because flushers are writing the files efficiently instead of page reclaim getting in the way. 3. The reduction in maximum write latency is staggering. 28 seconds down to 3 seconds. Jan Kara asked how NFS is affected by all of this. Unstable pages can be taken into account as one of the patches in the series shows but it is still the case that filesystems with unusual handling of dirty or writeback could still be treated better. Tests like postmark, fsmark and largedd showed up nothing useful. On my test setup, pages are simply not being written back from reclaim context with or without the patches and there are no changes in performance. My test setup probably is just not strong enough network-wise to be really interesting. I ran a longer-lived memcached test with IO going to NFS instead of a local disk parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%) Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%) Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%) Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%) Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%) Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%) Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%) Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%) Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%) Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%) Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%) Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%) Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%) Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%) Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%) Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%) Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%) Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%) 1. Performance does not collapse due to IO which is good. IO is also completing faster. Note with mmotm, IO completes in a third of the time and faster again with this series applied 2. Swapping is reduced, although not eliminated. The figures for the follow-up look bad but it does vary a bit as the stalling is not perfect for nfs or filesystems like ext3 with unusual handling of dirty and writeback pages 3. There are swapins, particularly with larger amounts of IO indicating that active pages are being reclaimed. However, the number of much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 36339175 35025445 35219699 Major Faults 310964 27108 51887 Swap Ins 2176399 173069 333316 Swap Outs 3344050 357228 504824 Direct pages scanned 8972 77283 43242 Kswapd pages scanned 20899983 8939566 14772851 Kswapd pages reclaimed 6193156 5172605 5231026 Direct pages reclaimed 8450 73802 39514 Kswapd efficiency 29% 57% 35% Kswapd velocity 3929.743 1847.499 3058.840 Direct efficiency 94% 95% 91% Direct velocity 1.687 15.972 8.954 Percentage direct scans 0% 0% 0% Zone normal velocity 3721.907 939.103 2185.142 Zone dma32 velocity 209.522 924.368 882.651 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 4082185.000 526319.000 537114.000 Page writes file 738135 169091 32290 Page writes anon 3344050 357228 504824 Page reclaim immediate 9524 170 5595843 Sector Reads 8909900 861192 1483680 Sector Writes 13428980 1488744 2076800 Page rescued immediate 0 0 0 Slabs scanned 38016 31744 28672 Direct inode steals 0 0 0 Kswapd inode steals 424 0 0 Kswapd skipped wait 0 0 0 THP fault alloc 14 15 119 THP collapse alloc 1767 1569 1618 THP splits 30 29 25 THP fault fallback 0 0 0 THP collapse fail 8 5 0 Compaction stalls 17 41 100 Compaction success 7 31 95 Compaction failures 10 10 5 Page migrate success 7083 22157 62217 Page migrate failure 0 0 0 Compaction pages isolated 14847 48758 135830 Compaction migrate scanned 18328 48398 138929 Compaction free scanned 2000255 355827 1720269 Compaction cost 7 24 68 I guess the main takeaway again is the much reduced page writes from reclaim context and reduced reads. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 23.58 0.35 0.44 Mean sda-await 133.47 15.72 15.46 Mean sda-r_await 4.72 4.69 3.95 Mean sda-w_await 507.69 28.40 33.68 Max sda-avgqz 680.60 12.25 23.14 Max sda-await 3958.89 221.83 286.22 Max sda-r_await 63.86 61.23 67.29 Max sda-w_await 11710.38 883.57 1767.28 And as before, write wait times are much reduced. This patch: The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority" decides whether to writeback pages from reclaim context based on the number of dirty pages encountered. This situation is flagged too easily and flushers are not given the chance to catch up resulting in more pages being written from reclaim context and potentially impacting IO performance. The check for PageWriteback is also misplaced as it happens within a PageDirty check which is nonsense as the dirty may have been cleared for IO. The accounting is updated very late and pages that are already under writeback, were reactivated, could not unmapped or could not be released are all missed. Similarly, a page is considered congested for reasons other than being congested and pages that cannot be written out in the correct context are skipped. Finally, it considers stalling and writing back filesystem pages due to encountering dirty anonymous pages at the tail of the LRU which is dumb. This patch causes kswapd to begin writing filesystem pages from reclaim context only if page reclaim found that all filesystem pages at the tail of the LRU were unqueued dirty pages. Before it starts writing filesystem pages, it will stall to give flushers a chance to catch up. The decision on whether wait_iff_congested is also now determined by dirty filesystem pages only. Congested pages are based on whether the underlying BDI is congested regardless of the context of the reclaiming process. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:57 +07:00
nr_congested++;
mm: vmscan: block kswapd if it is encountering pages under writeback Historically, kswapd used to congestion_wait() at higher priorities if it was not making forward progress. This made no sense as the failure to make progress could be completely independent of IO. It was later replaced by wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't wait on congested zones in balance_pgdat()) as it was duplicating logic in shrink_inactive_list(). This is problematic. If kswapd encounters many pages under writeback and it continues to scan until it reaches the high watermark then it will quickly skip over the pages under writeback and reclaim clean young pages or push applications out to swap. The use of wait_iff_congested() is not suited to kswapd as it will only stall if the underlying BDI is really congested or a direct reclaimer was unable to write to the underlying BDI. kswapd bypasses the BDI congestion as it sets PF_SWAPWRITE but even if this was taken into account then it would cause direct reclaimers to stall on writeback which is not desirable. This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is encountering too many pages under writeback. If this flag is set and kswapd encounters a PageReclaim page under writeback then it'll assume that the LRU lists are being recycled too quickly before IO can complete and block waiting for some IO to complete. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:51 +07:00
/*
* If a page at the tail of the LRU is under writeback, there
* are three cases to consider.
*
* 1) If reclaim is encountering an excessive number of pages
* under writeback and this page is both under writeback and
* PageReclaim then it indicates that pages are being queued
* for IO but are being recycled through the LRU before the
* IO can complete. Waiting on the page itself risks an
* indefinite stall if it is impossible to writeback the
* page due to IO error or disconnected storage so instead
* note that the LRU is being scanned too quickly and the
* caller can stall after page list has been processed.
mm: vmscan: block kswapd if it is encountering pages under writeback Historically, kswapd used to congestion_wait() at higher priorities if it was not making forward progress. This made no sense as the failure to make progress could be completely independent of IO. It was later replaced by wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't wait on congested zones in balance_pgdat()) as it was duplicating logic in shrink_inactive_list(). This is problematic. If kswapd encounters many pages under writeback and it continues to scan until it reaches the high watermark then it will quickly skip over the pages under writeback and reclaim clean young pages or push applications out to swap. The use of wait_iff_congested() is not suited to kswapd as it will only stall if the underlying BDI is really congested or a direct reclaimer was unable to write to the underlying BDI. kswapd bypasses the BDI congestion as it sets PF_SWAPWRITE but even if this was taken into account then it would cause direct reclaimers to stall on writeback which is not desirable. This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is encountering too many pages under writeback. If this flag is set and kswapd encounters a PageReclaim page under writeback then it'll assume that the LRU lists are being recycled too quickly before IO can complete and block waiting for some IO to complete. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:51 +07:00
*
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use Because writeback wasn't cgroup aware before, the usual dirty throttling mechanism in balance_dirty_pages() didn't work for processes under memcg limit. The writeback path didn't know how much memory is available or how fast the dirty pages are being written out for a given memcg and balance_dirty_pages() didn't have any measure of IO back pressure for the memcg. To work around the issue, memcg implemented an ad-hoc dirty throttling mechanism in the direct reclaim path by stalling on pages under writeback which are encountered during direct reclaim scan. This is rather ugly and crude - none of the configurability, fairness, or bandwidth-proportional distribution of the normal path. The previous patches implemented proper memcg aware dirty throttling when cgroup writeback is in use making the ad-hoc mechanism unnecessary. This patch disables direct reclaim stalling for such case. Note: I disabled the parts which seemed obvious and it behaves fine while testing but my understanding of this code path is rudimentary and it's quite possible that I got something wrong. Please let me know if I got some wrong or more global_reclaim() sites should be updated. v2: The original patch removed the direct stalling mechanism which breaks legacy hierarchies. Conditionalize instead of removing. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:23:36 +07:00
* 2) Global or new memcg reclaim encounters a page that is
mm, vmscan: Do not wait for page writeback for GFP_NOFS allocations Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 #1 schedule at ffffffff815ab76e #2 schedule_timeout at ffffffff815ae5e5 #3 io_schedule_timeout at ffffffff815aad6a #4 bit_wait_io at ffffffff815abfc6 #5 __wait_on_bit at ffffffff815abda5 #6 wait_on_page_bit at ffffffff8111fd4f #7 shrink_page_list at ffffffff81135445 #8 shrink_inactive_list at ffffffff81135845 #9 shrink_lruvec at ffffffff81135ead #10 shrink_zone at ffffffff811360c3 #11 shrink_zones at ffffffff81136eff #12 do_try_to_free_pages at ffffffff8113712f #13 try_to_free_mem_cgroup_pages at ffffffff811372be #14 try_charge at ffffffff81189423 #15 mem_cgroup_try_charge at ffffffff8118c6f5 #16 __add_to_page_cache_locked at ffffffff8112137d #17 add_to_page_cache_lru at ffffffff81121618 #18 pagecache_get_page at ffffffff8112170b #19 grow_dev_page at ffffffff811c8297 #20 __getblk_slow at ffffffff811c91d6 #21 __getblk_gfp at ffffffff811c92c1 #22 ext4_ext_grow_indepth at ffffffff8124565c #23 ext4_ext_create_new_leaf at ffffffff81246ca8 #24 ext4_ext_insert_extent at ffffffff81246f09 #25 ext4_ext_map_blocks at ffffffff8124a848 #26 ext4_map_blocks at ffffffff8121a5b7 #27 mpage_map_one_extent at ffffffff8121b1fa #28 mpage_map_and_submit_extent at ffffffff8121f07b #29 ext4_writepages at ffffffff8121f6d5 #30 do_writepages at ffffffff8112c490 #31 __filemap_fdatawrite_range at ffffffff81120199 #32 filemap_flush at ffffffff8112041c #33 ext4_alloc_da_blocks at ffffffff81219da1 #34 ext4_rename at ffffffff81229b91 #35 ext4_rename2 at ffffffff81229e32 #36 vfs_rename at ffffffff811a08a5 #37 SYSC_renameat2 at ffffffff811a3ffc #38 sys_renameat2 at ffffffff811a408e #39 sys_rename at ffffffff8119e51e #40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384e9da8 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. Cc: stable@vger.kernel.org # 3.9+ [tytso@mit.edu: corrected the control flow] Fixes: c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-05 04:36:58 +07:00
* not marked for immediate reclaim, or the caller does not
* have __GFP_FS (or __GFP_IO if it's simply going to swap,
* not to fs). In this case mark the page for immediate
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use Because writeback wasn't cgroup aware before, the usual dirty throttling mechanism in balance_dirty_pages() didn't work for processes under memcg limit. The writeback path didn't know how much memory is available or how fast the dirty pages are being written out for a given memcg and balance_dirty_pages() didn't have any measure of IO back pressure for the memcg. To work around the issue, memcg implemented an ad-hoc dirty throttling mechanism in the direct reclaim path by stalling on pages under writeback which are encountered during direct reclaim scan. This is rather ugly and crude - none of the configurability, fairness, or bandwidth-proportional distribution of the normal path. The previous patches implemented proper memcg aware dirty throttling when cgroup writeback is in use making the ad-hoc mechanism unnecessary. This patch disables direct reclaim stalling for such case. Note: I disabled the parts which seemed obvious and it behaves fine while testing but my understanding of this code path is rudimentary and it's quite possible that I got something wrong. Please let me know if I got some wrong or more global_reclaim() sites should be updated. v2: The original patch removed the direct stalling mechanism which breaks legacy hierarchies. Conditionalize instead of removing. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:23:36 +07:00
* reclaim and continue scanning.
mm: vmscan: block kswapd if it is encountering pages under writeback Historically, kswapd used to congestion_wait() at higher priorities if it was not making forward progress. This made no sense as the failure to make progress could be completely independent of IO. It was later replaced by wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't wait on congested zones in balance_pgdat()) as it was duplicating logic in shrink_inactive_list(). This is problematic. If kswapd encounters many pages under writeback and it continues to scan until it reaches the high watermark then it will quickly skip over the pages under writeback and reclaim clean young pages or push applications out to swap. The use of wait_iff_congested() is not suited to kswapd as it will only stall if the underlying BDI is really congested or a direct reclaimer was unable to write to the underlying BDI. kswapd bypasses the BDI congestion as it sets PF_SWAPWRITE but even if this was taken into account then it would cause direct reclaimers to stall on writeback which is not desirable. This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is encountering too many pages under writeback. If this flag is set and kswapd encounters a PageReclaim page under writeback then it'll assume that the LRU lists are being recycled too quickly before IO can complete and block waiting for some IO to complete. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:51 +07:00
*
mm, vmscan: Do not wait for page writeback for GFP_NOFS allocations Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 #1 schedule at ffffffff815ab76e #2 schedule_timeout at ffffffff815ae5e5 #3 io_schedule_timeout at ffffffff815aad6a #4 bit_wait_io at ffffffff815abfc6 #5 __wait_on_bit at ffffffff815abda5 #6 wait_on_page_bit at ffffffff8111fd4f #7 shrink_page_list at ffffffff81135445 #8 shrink_inactive_list at ffffffff81135845 #9 shrink_lruvec at ffffffff81135ead #10 shrink_zone at ffffffff811360c3 #11 shrink_zones at ffffffff81136eff #12 do_try_to_free_pages at ffffffff8113712f #13 try_to_free_mem_cgroup_pages at ffffffff811372be #14 try_charge at ffffffff81189423 #15 mem_cgroup_try_charge at ffffffff8118c6f5 #16 __add_to_page_cache_locked at ffffffff8112137d #17 add_to_page_cache_lru at ffffffff81121618 #18 pagecache_get_page at ffffffff8112170b #19 grow_dev_page at ffffffff811c8297 #20 __getblk_slow at ffffffff811c91d6 #21 __getblk_gfp at ffffffff811c92c1 #22 ext4_ext_grow_indepth at ffffffff8124565c #23 ext4_ext_create_new_leaf at ffffffff81246ca8 #24 ext4_ext_insert_extent at ffffffff81246f09 #25 ext4_ext_map_blocks at ffffffff8124a848 #26 ext4_map_blocks at ffffffff8121a5b7 #27 mpage_map_one_extent at ffffffff8121b1fa #28 mpage_map_and_submit_extent at ffffffff8121f07b #29 ext4_writepages at ffffffff8121f6d5 #30 do_writepages at ffffffff8112c490 #31 __filemap_fdatawrite_range at ffffffff81120199 #32 filemap_flush at ffffffff8112041c #33 ext4_alloc_da_blocks at ffffffff81219da1 #34 ext4_rename at ffffffff81229b91 #35 ext4_rename2 at ffffffff81229e32 #36 vfs_rename at ffffffff811a08a5 #37 SYSC_renameat2 at ffffffff811a3ffc #38 sys_renameat2 at ffffffff811a408e #39 sys_rename at ffffffff8119e51e #40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384e9da8 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. Cc: stable@vger.kernel.org # 3.9+ [tytso@mit.edu: corrected the control flow] Fixes: c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-05 04:36:58 +07:00
* Require may_enter_fs because we would wait on fs, which
* may not have submitted IO yet. And the loop driver might
mm: vmscan: block kswapd if it is encountering pages under writeback Historically, kswapd used to congestion_wait() at higher priorities if it was not making forward progress. This made no sense as the failure to make progress could be completely independent of IO. It was later replaced by wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't wait on congested zones in balance_pgdat()) as it was duplicating logic in shrink_inactive_list(). This is problematic. If kswapd encounters many pages under writeback and it continues to scan until it reaches the high watermark then it will quickly skip over the pages under writeback and reclaim clean young pages or push applications out to swap. The use of wait_iff_congested() is not suited to kswapd as it will only stall if the underlying BDI is really congested or a direct reclaimer was unable to write to the underlying BDI. kswapd bypasses the BDI congestion as it sets PF_SWAPWRITE but even if this was taken into account then it would cause direct reclaimers to stall on writeback which is not desirable. This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is encountering too many pages under writeback. If this flag is set and kswapd encounters a PageReclaim page under writeback then it'll assume that the LRU lists are being recycled too quickly before IO can complete and block waiting for some IO to complete. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:51 +07:00
* enter reclaim, and deadlock if it waits on a page for
* which it is needed to do the write (loop masks off
* __GFP_IO|__GFP_FS for this reason); but more thought
* would probably show more reasons.
*
* 3) Legacy memcg encounters a page that is already marked
mm: vmscan: block kswapd if it is encountering pages under writeback Historically, kswapd used to congestion_wait() at higher priorities if it was not making forward progress. This made no sense as the failure to make progress could be completely independent of IO. It was later replaced by wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't wait on congested zones in balance_pgdat()) as it was duplicating logic in shrink_inactive_list(). This is problematic. If kswapd encounters many pages under writeback and it continues to scan until it reaches the high watermark then it will quickly skip over the pages under writeback and reclaim clean young pages or push applications out to swap. The use of wait_iff_congested() is not suited to kswapd as it will only stall if the underlying BDI is really congested or a direct reclaimer was unable to write to the underlying BDI. kswapd bypasses the BDI congestion as it sets PF_SWAPWRITE but even if this was taken into account then it would cause direct reclaimers to stall on writeback which is not desirable. This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is encountering too many pages under writeback. If this flag is set and kswapd encounters a PageReclaim page under writeback then it'll assume that the LRU lists are being recycled too quickly before IO can complete and block waiting for some IO to complete. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:51 +07:00
* PageReclaim. memcg does not have any dirty pages
* throttling so we could easily OOM just because too many
* pages are in writeback and there is nothing else to
* reclaim. Wait for the writeback to complete.
*/
if (PageWriteback(page)) {
mm: vmscan: block kswapd if it is encountering pages under writeback Historically, kswapd used to congestion_wait() at higher priorities if it was not making forward progress. This made no sense as the failure to make progress could be completely independent of IO. It was later replaced by wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't wait on congested zones in balance_pgdat()) as it was duplicating logic in shrink_inactive_list(). This is problematic. If kswapd encounters many pages under writeback and it continues to scan until it reaches the high watermark then it will quickly skip over the pages under writeback and reclaim clean young pages or push applications out to swap. The use of wait_iff_congested() is not suited to kswapd as it will only stall if the underlying BDI is really congested or a direct reclaimer was unable to write to the underlying BDI. kswapd bypasses the BDI congestion as it sets PF_SWAPWRITE but even if this was taken into account then it would cause direct reclaimers to stall on writeback which is not desirable. This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is encountering too many pages under writeback. If this flag is set and kswapd encounters a PageReclaim page under writeback then it'll assume that the LRU lists are being recycled too quickly before IO can complete and block waiting for some IO to complete. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:51 +07:00
/* Case 1 above */
if (current_is_kswapd() &&
PageReclaim(page) &&
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
test_bit(PGDAT_WRITEBACK, &pgdat->flags)) {
nr_immediate++;
goto keep_locked;
mm: vmscan: block kswapd if it is encountering pages under writeback Historically, kswapd used to congestion_wait() at higher priorities if it was not making forward progress. This made no sense as the failure to make progress could be completely independent of IO. It was later replaced by wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't wait on congested zones in balance_pgdat()) as it was duplicating logic in shrink_inactive_list(). This is problematic. If kswapd encounters many pages under writeback and it continues to scan until it reaches the high watermark then it will quickly skip over the pages under writeback and reclaim clean young pages or push applications out to swap. The use of wait_iff_congested() is not suited to kswapd as it will only stall if the underlying BDI is really congested or a direct reclaimer was unable to write to the underlying BDI. kswapd bypasses the BDI congestion as it sets PF_SWAPWRITE but even if this was taken into account then it would cause direct reclaimers to stall on writeback which is not desirable. This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is encountering too many pages under writeback. If this flag is set and kswapd encounters a PageReclaim page under writeback then it'll assume that the LRU lists are being recycled too quickly before IO can complete and block waiting for some IO to complete. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:51 +07:00
/* Case 2 above */
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use Because writeback wasn't cgroup aware before, the usual dirty throttling mechanism in balance_dirty_pages() didn't work for processes under memcg limit. The writeback path didn't know how much memory is available or how fast the dirty pages are being written out for a given memcg and balance_dirty_pages() didn't have any measure of IO back pressure for the memcg. To work around the issue, memcg implemented an ad-hoc dirty throttling mechanism in the direct reclaim path by stalling on pages under writeback which are encountered during direct reclaim scan. This is rather ugly and crude - none of the configurability, fairness, or bandwidth-proportional distribution of the normal path. The previous patches implemented proper memcg aware dirty throttling when cgroup writeback is in use making the ad-hoc mechanism unnecessary. This patch disables direct reclaim stalling for such case. Note: I disabled the parts which seemed obvious and it behaves fine while testing but my understanding of this code path is rudimentary and it's quite possible that I got something wrong. Please let me know if I got some wrong or more global_reclaim() sites should be updated. v2: The original patch removed the direct stalling mechanism which breaks legacy hierarchies. Conditionalize instead of removing. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:23:36 +07:00
} else if (sane_reclaim(sc) ||
mm, vmscan: Do not wait for page writeback for GFP_NOFS allocations Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 #1 schedule at ffffffff815ab76e #2 schedule_timeout at ffffffff815ae5e5 #3 io_schedule_timeout at ffffffff815aad6a #4 bit_wait_io at ffffffff815abfc6 #5 __wait_on_bit at ffffffff815abda5 #6 wait_on_page_bit at ffffffff8111fd4f #7 shrink_page_list at ffffffff81135445 #8 shrink_inactive_list at ffffffff81135845 #9 shrink_lruvec at ffffffff81135ead #10 shrink_zone at ffffffff811360c3 #11 shrink_zones at ffffffff81136eff #12 do_try_to_free_pages at ffffffff8113712f #13 try_to_free_mem_cgroup_pages at ffffffff811372be #14 try_charge at ffffffff81189423 #15 mem_cgroup_try_charge at ffffffff8118c6f5 #16 __add_to_page_cache_locked at ffffffff8112137d #17 add_to_page_cache_lru at ffffffff81121618 #18 pagecache_get_page at ffffffff8112170b #19 grow_dev_page at ffffffff811c8297 #20 __getblk_slow at ffffffff811c91d6 #21 __getblk_gfp at ffffffff811c92c1 #22 ext4_ext_grow_indepth at ffffffff8124565c #23 ext4_ext_create_new_leaf at ffffffff81246ca8 #24 ext4_ext_insert_extent at ffffffff81246f09 #25 ext4_ext_map_blocks at ffffffff8124a848 #26 ext4_map_blocks at ffffffff8121a5b7 #27 mpage_map_one_extent at ffffffff8121b1fa #28 mpage_map_and_submit_extent at ffffffff8121f07b #29 ext4_writepages at ffffffff8121f6d5 #30 do_writepages at ffffffff8112c490 #31 __filemap_fdatawrite_range at ffffffff81120199 #32 filemap_flush at ffffffff8112041c #33 ext4_alloc_da_blocks at ffffffff81219da1 #34 ext4_rename at ffffffff81229b91 #35 ext4_rename2 at ffffffff81229e32 #36 vfs_rename at ffffffff811a08a5 #37 SYSC_renameat2 at ffffffff811a3ffc #38 sys_renameat2 at ffffffff811a408e #39 sys_rename at ffffffff8119e51e #40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384e9da8 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. Cc: stable@vger.kernel.org # 3.9+ [tytso@mit.edu: corrected the control flow] Fixes: c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-05 04:36:58 +07:00
!PageReclaim(page) || !may_enter_fs) {
memcg: further prevent OOM with too many dirty pages The may_enter_fs test turns out to be too restrictive: though I saw no problem with it when testing on 3.5-rc6, it very soon OOMed when I tested on 3.5-rc6-mm1. I don't know what the difference there is, perhaps I just slightly changed the way I started off the testing: dd if=/dev/zero of=/mnt/temp bs=1M count=1024; rm -f /mnt/temp; sync repeatedly, in 20M memory.limit_in_bytes cgroup to ext4 on USB stick. ext4 (and gfs2 and xfs) turn out to allocate new pages for writing with AOP_FLAG_NOFS: that seems a little worrying, and it's unclear to me why the transaction needs to be started even before allocating pagecache memory. But it may not be worth worrying about these days: if direct reclaim avoids FS writeback, does __GFP_FS now mean anything? Anyway, we insisted on the may_enter_fs test to avoid hangs with the loop device; but since that also masks off __GFP_IO, we can test for __GFP_IO directly, ignoring may_enter_fs and __GFP_FS. But even so, the test still OOMs sometimes: when originally testing on 3.5-rc6, it OOMed about one time in five or ten; when testing just now on 3.5-rc6-mm1, it OOMed on the first iteration. This residual problem comes from an accumulation of pages under ordinary writeback, not marked PageReclaim, so rightly not causing the memcg check to wait on their writeback: these too can prevent shrink_page_list() from freeing any pages, so many times that memcg reclaim fails and OOMs. Deal with these in the same way as direct reclaim now deals with dirty FS pages: mark them PageReclaim. It is appropriate to rotate these to tail of list when writepage completes, but more importantly, the PageReclaim flag makes memcg reclaim wait on them if encountered again. Increment NR_VMSCAN_IMMEDIATE? That's arguable: I chose not. Setting PageReclaim here may occasionally race with end_page_writeback() clearing it: lru_deactivate_fn() already faced the same race, and correctly concluded that the window is small and the issue non-critical. With these changes, the test runs indefinitely without OOMing on ext4, ext3 and ext2: I'll move on to test with other filesystems later. Trivia: invert conditions for a clearer block without an else, and goto keep_locked to do the unlock_page. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01 06:45:59 +07:00
/*
* This is slightly racy - end_page_writeback()
* might have just cleared PageReclaim, then
* setting PageReclaim here end up interpreted
* as PageReadahead - but that does not matter
* enough to care. What we do want is for this
* page to have PageReclaim set next time memcg
* reclaim reaches the tests above, so it will
* then wait_on_page_writeback() to avoid OOM;
* and it's also appropriate in global reclaim.
*/
SetPageReclaim(page);
memcg: prevent OOM with too many dirty pages The current implementation of dirty pages throttling is not memcg aware which makes it easy to have memcg LRUs full of dirty pages. Without throttling, these LRUs can be scanned faster than the rate of writeback, leading to memcg OOM conditions when the hard limit is small. This patch fixes the problem by throttling the allocating process (possibly a writer) during the hard limit reclaim by waiting on PageReclaim pages. We are waiting only for PageReclaim pages because those are the pages that made one full round over LRU and that means that the writeback is much slower than scanning. The solution is far from being ideal - long term solution is memcg aware dirty throttling - but it is meant to be a band aid until we have a real fix. We are seeing this happening during nightly backups which are placed into containers to prevent from eviction of the real working set. The change affects only memcg reclaim and only when we encounter PageReclaim pages which is a signal that the reclaim doesn't catch up on with the writers so somebody should be throttled. This could be potentially unfair because it could be somebody else from the group who gets throttled on behalf of the writer but as writers need to allocate as well and they allocate in higher rate the probability that only innocent processes would be penalized is not that high. I have tested this change by a simple dd copying /dev/zero to tmpfs or ext3 running under small memcg (1G copy under 5M, 60M, 300M and 2G containers) and dd got killed by OOM killer every time. With the patch I could run the dd with the same size under 5M controller without any OOM. The issue is more visible with slower devices for output. * With the patch ================ * tmpfs size=2G --------------- $ vim cgroup_cache_oom_test.sh $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 30.4049 s, 34.5 MB/s $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 31.4561 s, 33.3 MB/s $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 20.4618 s, 51.2 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 1.42172 s, 738 MB/s * ext3 ------ $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 27.9547 s, 37.5 MB/s $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 30.3221 s, 34.6 MB/s $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 24.5764 s, 42.7 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 3.35828 s, 312 MB/s * Without the patch =================== * tmpfs size=2G --------------- $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group ./cgroup_cache_oom_test.sh: line 46: 4668 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 25.4989 s, 41.1 MB/s $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 24.3928 s, 43.0 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 1.49797 s, 700 MB/s * ext3 ------ $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group ./cgroup_cache_oom_test.sh: line 46: 4689 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group ./cgroup_cache_oom_test.sh: line 46: 4692 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 20.248 s, 51.8 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 2.85201 s, 368 MB/s [akpm@linux-foundation.org: tweak changelog, reordered the test to optimize for CONFIG_CGROUP_MEM_RES_CTLR=n] [hughd@google.com: fix deadlock with loop driver] Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01 06:45:55 +07:00
nr_writeback++;
memcg: further prevent OOM with too many dirty pages The may_enter_fs test turns out to be too restrictive: though I saw no problem with it when testing on 3.5-rc6, it very soon OOMed when I tested on 3.5-rc6-mm1. I don't know what the difference there is, perhaps I just slightly changed the way I started off the testing: dd if=/dev/zero of=/mnt/temp bs=1M count=1024; rm -f /mnt/temp; sync repeatedly, in 20M memory.limit_in_bytes cgroup to ext4 on USB stick. ext4 (and gfs2 and xfs) turn out to allocate new pages for writing with AOP_FLAG_NOFS: that seems a little worrying, and it's unclear to me why the transaction needs to be started even before allocating pagecache memory. But it may not be worth worrying about these days: if direct reclaim avoids FS writeback, does __GFP_FS now mean anything? Anyway, we insisted on the may_enter_fs test to avoid hangs with the loop device; but since that also masks off __GFP_IO, we can test for __GFP_IO directly, ignoring may_enter_fs and __GFP_FS. But even so, the test still OOMs sometimes: when originally testing on 3.5-rc6, it OOMed about one time in five or ten; when testing just now on 3.5-rc6-mm1, it OOMed on the first iteration. This residual problem comes from an accumulation of pages under ordinary writeback, not marked PageReclaim, so rightly not causing the memcg check to wait on their writeback: these too can prevent shrink_page_list() from freeing any pages, so many times that memcg reclaim fails and OOMs. Deal with these in the same way as direct reclaim now deals with dirty FS pages: mark them PageReclaim. It is appropriate to rotate these to tail of list when writepage completes, but more importantly, the PageReclaim flag makes memcg reclaim wait on them if encountered again. Increment NR_VMSCAN_IMMEDIATE? That's arguable: I chose not. Setting PageReclaim here may occasionally race with end_page_writeback() clearing it: lru_deactivate_fn() already faced the same race, and correctly concluded that the window is small and the issue non-critical. With these changes, the test runs indefinitely without OOMing on ext4, ext3 and ext2: I'll move on to test with other filesystems later. Trivia: invert conditions for a clearer block without an else, and goto keep_locked to do the unlock_page. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01 06:45:59 +07:00
goto keep_locked;
mm: vmscan: block kswapd if it is encountering pages under writeback Historically, kswapd used to congestion_wait() at higher priorities if it was not making forward progress. This made no sense as the failure to make progress could be completely independent of IO. It was later replaced by wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't wait on congested zones in balance_pgdat()) as it was duplicating logic in shrink_inactive_list(). This is problematic. If kswapd encounters many pages under writeback and it continues to scan until it reaches the high watermark then it will quickly skip over the pages under writeback and reclaim clean young pages or push applications out to swap. The use of wait_iff_congested() is not suited to kswapd as it will only stall if the underlying BDI is really congested or a direct reclaimer was unable to write to the underlying BDI. kswapd bypasses the BDI congestion as it sets PF_SWAPWRITE but even if this was taken into account then it would cause direct reclaimers to stall on writeback which is not desirable. This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is encountering too many pages under writeback. If this flag is set and kswapd encounters a PageReclaim page under writeback then it'll assume that the LRU lists are being recycled too quickly before IO can complete and block waiting for some IO to complete. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:51 +07:00
/* Case 3 above */
} else {
unlock_page(page);
mm: vmscan: block kswapd if it is encountering pages under writeback Historically, kswapd used to congestion_wait() at higher priorities if it was not making forward progress. This made no sense as the failure to make progress could be completely independent of IO. It was later replaced by wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't wait on congested zones in balance_pgdat()) as it was duplicating logic in shrink_inactive_list(). This is problematic. If kswapd encounters many pages under writeback and it continues to scan until it reaches the high watermark then it will quickly skip over the pages under writeback and reclaim clean young pages or push applications out to swap. The use of wait_iff_congested() is not suited to kswapd as it will only stall if the underlying BDI is really congested or a direct reclaimer was unable to write to the underlying BDI. kswapd bypasses the BDI congestion as it sets PF_SWAPWRITE but even if this was taken into account then it would cause direct reclaimers to stall on writeback which is not desirable. This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is encountering too many pages under writeback. If this flag is set and kswapd encounters a PageReclaim page under writeback then it'll assume that the LRU lists are being recycled too quickly before IO can complete and block waiting for some IO to complete. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:51 +07:00
wait_on_page_writeback(page);
/* then go back and try same page again */
list_add_tail(&page->lru, page_list);
continue;
memcg: prevent OOM with too many dirty pages The current implementation of dirty pages throttling is not memcg aware which makes it easy to have memcg LRUs full of dirty pages. Without throttling, these LRUs can be scanned faster than the rate of writeback, leading to memcg OOM conditions when the hard limit is small. This patch fixes the problem by throttling the allocating process (possibly a writer) during the hard limit reclaim by waiting on PageReclaim pages. We are waiting only for PageReclaim pages because those are the pages that made one full round over LRU and that means that the writeback is much slower than scanning. The solution is far from being ideal - long term solution is memcg aware dirty throttling - but it is meant to be a band aid until we have a real fix. We are seeing this happening during nightly backups which are placed into containers to prevent from eviction of the real working set. The change affects only memcg reclaim and only when we encounter PageReclaim pages which is a signal that the reclaim doesn't catch up on with the writers so somebody should be throttled. This could be potentially unfair because it could be somebody else from the group who gets throttled on behalf of the writer but as writers need to allocate as well and they allocate in higher rate the probability that only innocent processes would be penalized is not that high. I have tested this change by a simple dd copying /dev/zero to tmpfs or ext3 running under small memcg (1G copy under 5M, 60M, 300M and 2G containers) and dd got killed by OOM killer every time. With the patch I could run the dd with the same size under 5M controller without any OOM. The issue is more visible with slower devices for output. * With the patch ================ * tmpfs size=2G --------------- $ vim cgroup_cache_oom_test.sh $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 30.4049 s, 34.5 MB/s $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 31.4561 s, 33.3 MB/s $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 20.4618 s, 51.2 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 1.42172 s, 738 MB/s * ext3 ------ $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 27.9547 s, 37.5 MB/s $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 30.3221 s, 34.6 MB/s $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 24.5764 s, 42.7 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 3.35828 s, 312 MB/s * Without the patch =================== * tmpfs size=2G --------------- $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group ./cgroup_cache_oom_test.sh: line 46: 4668 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 25.4989 s, 41.1 MB/s $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 24.3928 s, 43.0 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 1.49797 s, 700 MB/s * ext3 ------ $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group ./cgroup_cache_oom_test.sh: line 46: 4689 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group ./cgroup_cache_oom_test.sh: line 46: 4692 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 20.248 s, 51.8 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 2.85201 s, 368 MB/s [akpm@linux-foundation.org: tweak changelog, reordered the test to optimize for CONFIG_CGROUP_MEM_RES_CTLR=n] [hughd@google.com: fix deadlock with loop driver] Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01 06:45:55 +07:00
}
}
if (!force_reclaim)
references = page_check_references(page, sc);
vmscan: factor out page reference checks The used-once mapped file page detection patchset. It is meant to help workloads with large amounts of shortly used file mappings, like rtorrent hashing a file or git when dealing with loose objects (git gc on a bigger site?). Right now, the VM activates referenced mapped file pages on first encounter on the inactive list and it takes a full memory cycle to reclaim them again. When those pages dominate memory, the system no longer has a meaningful notion of 'working set' and is required to give up the active list to make reclaim progress. Obviously, this results in rather bad scanning latencies and the wrong pages being reclaimed. This patch makes the VM be more careful about activating mapped file pages in the first place. The minimum granted lifetime without another memory access becomes an inactive list cycle instead of the full memory cycle, which is more natural given the mentioned loads. This test resembles a hashing rtorrent process. Sequentially, 32MB chunks of a file are mapped into memory, hashed (sha1) and unmapped again. While this happens, every 5 seconds a process is launched and its execution time taken: python2.4 -c 'import pydoc' old: max=2.31s mean=1.26s (0.34) new: max=1.25s mean=0.32s (0.32) find /etc -type f old: max=2.52s mean=1.44s (0.43) new: max=1.92s mean=0.12s (0.17) vim -c ':quit' old: max=6.14s mean=4.03s (0.49) new: max=3.48s mean=2.41s (0.25) mplayer --help old: max=8.08s mean=5.74s (1.02) new: max=3.79s mean=1.32s (0.81) overall hash time (stdev): old: time=1192.30 (12.85) thruput=25.78mb/s (0.27) new: time=1060.27 (32.58) thruput=29.02mb/s (0.88) (-11%) I also tested kernbench with regular IO streaming in the background to see whether the delayed activation of frequently used mapped file pages had a negative impact on performance in the presence of pressure on the inactive list. The patch made no significant difference in timing, neither for kernbench nor for the streaming IO throughput. The first patch submission raised concerns about the cost of the extra faults for actually activated pages on machines that have no hardware support for young page table entries. I created an artificial worst case scenario on an ARM machine with around 300MHz and 64MB of memory to figure out the dimensions involved. The test would mmap a file of 20MB, then 1. touch all its pages to fault them in 2. force one full scan cycle on the inactive file LRU -- old: mapping pages activated -- new: mapping pages inactive 3. touch the mapping pages again -- old and new: fault exceptions to set the young bits 4. force another full scan cycle on the inactive file LRU 5. touch the mapping pages one last time -- new: fault exceptions to set the young bits The test showed an overall increase of 6% in time over 100 iterations of the above (old: ~212sec, new: ~225sec). 13 secs total overhead / (100 * 5k pages), ignoring the execution time of the test itself, makes for about 25us overhead for every page that gets actually activated. Note: 1. File mapping the size of one third of main memory, _completely_ in active use across memory pressure - i.e., most pages referenced within one LRU cycle. This should be rare to non-existant, especially on such embedded setups. 2. Many huge activation batches. Those batches only occur when the working set fluctuates. If it changes completely between every full LRU cycle, you have problematic reclaim overhead anyway. 3. Access of activated pages at maximum speed: sequential loads from every single page without doing anything in between. In reality, the extra faults will get distributed between actual operations on the data. So even if a workload manages to get the VM into the situation of activating a third of memory in one go on such a setup, it will take 2.2 seconds instead 2.1 without the patch. Comparing the numbers (and my user-experience over several months), I think this change is an overall improvement to the VM. Patch 1 is only refactoring to break up that ugly compound conditional in shrink_page_list() and make it easy to document and add new checks in a readable fashion. Patch 2 gets rid of the obsolete page_mapping_inuse(). It's not strictly related to #3, but it was in the original submission and is a net simplification, so I kept it. Patch 3 implements used-once detection of mapped file pages. This patch: Moving the big conditional into its own predicate function makes the code a bit easier to read and allows for better commenting on the checks one-by-one. This is just cleaning up, no semantics should have been changed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:19 +07:00
switch (references) {
case PAGEREF_ACTIVATE:
goto activate_locked;
vmscan: detect mapped file pages used only once The VM currently assumes that an inactive, mapped and referenced file page is in use and promotes it to the active list. However, every mapped file page starts out like this and thus a problem arises when workloads create a stream of such pages that are used only for a short time. By flooding the active list with those pages, the VM quickly gets into trouble finding eligible reclaim canditates. The result is long allocation latencies and eviction of the wrong pages. This patch reuses the PG_referenced page flag (used for unmapped file pages) to implement a usage detection that scales with the speed of LRU list cycling (i.e. memory pressure). If the scanner encounters those pages, the flag is set and the page cycled again on the inactive list. Only if it returns with another page table reference it is activated. Otherwise it is reclaimed as 'not recently used cache'. This effectively changes the minimum lifetime of a used-once mapped file page from a full memory cycle to an inactive list cycle, which allows it to occur in linear streams without affecting the stable working set of the system. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:22 +07:00
case PAGEREF_KEEP:
goto keep_locked;
vmscan: factor out page reference checks The used-once mapped file page detection patchset. It is meant to help workloads with large amounts of shortly used file mappings, like rtorrent hashing a file or git when dealing with loose objects (git gc on a bigger site?). Right now, the VM activates referenced mapped file pages on first encounter on the inactive list and it takes a full memory cycle to reclaim them again. When those pages dominate memory, the system no longer has a meaningful notion of 'working set' and is required to give up the active list to make reclaim progress. Obviously, this results in rather bad scanning latencies and the wrong pages being reclaimed. This patch makes the VM be more careful about activating mapped file pages in the first place. The minimum granted lifetime without another memory access becomes an inactive list cycle instead of the full memory cycle, which is more natural given the mentioned loads. This test resembles a hashing rtorrent process. Sequentially, 32MB chunks of a file are mapped into memory, hashed (sha1) and unmapped again. While this happens, every 5 seconds a process is launched and its execution time taken: python2.4 -c 'import pydoc' old: max=2.31s mean=1.26s (0.34) new: max=1.25s mean=0.32s (0.32) find /etc -type f old: max=2.52s mean=1.44s (0.43) new: max=1.92s mean=0.12s (0.17) vim -c ':quit' old: max=6.14s mean=4.03s (0.49) new: max=3.48s mean=2.41s (0.25) mplayer --help old: max=8.08s mean=5.74s (1.02) new: max=3.79s mean=1.32s (0.81) overall hash time (stdev): old: time=1192.30 (12.85) thruput=25.78mb/s (0.27) new: time=1060.27 (32.58) thruput=29.02mb/s (0.88) (-11%) I also tested kernbench with regular IO streaming in the background to see whether the delayed activation of frequently used mapped file pages had a negative impact on performance in the presence of pressure on the inactive list. The patch made no significant difference in timing, neither for kernbench nor for the streaming IO throughput. The first patch submission raised concerns about the cost of the extra faults for actually activated pages on machines that have no hardware support for young page table entries. I created an artificial worst case scenario on an ARM machine with around 300MHz and 64MB of memory to figure out the dimensions involved. The test would mmap a file of 20MB, then 1. touch all its pages to fault them in 2. force one full scan cycle on the inactive file LRU -- old: mapping pages activated -- new: mapping pages inactive 3. touch the mapping pages again -- old and new: fault exceptions to set the young bits 4. force another full scan cycle on the inactive file LRU 5. touch the mapping pages one last time -- new: fault exceptions to set the young bits The test showed an overall increase of 6% in time over 100 iterations of the above (old: ~212sec, new: ~225sec). 13 secs total overhead / (100 * 5k pages), ignoring the execution time of the test itself, makes for about 25us overhead for every page that gets actually activated. Note: 1. File mapping the size of one third of main memory, _completely_ in active use across memory pressure - i.e., most pages referenced within one LRU cycle. This should be rare to non-existant, especially on such embedded setups. 2. Many huge activation batches. Those batches only occur when the working set fluctuates. If it changes completely between every full LRU cycle, you have problematic reclaim overhead anyway. 3. Access of activated pages at maximum speed: sequential loads from every single page without doing anything in between. In reality, the extra faults will get distributed between actual operations on the data. So even if a workload manages to get the VM into the situation of activating a third of memory in one go on such a setup, it will take 2.2 seconds instead 2.1 without the patch. Comparing the numbers (and my user-experience over several months), I think this change is an overall improvement to the VM. Patch 1 is only refactoring to break up that ugly compound conditional in shrink_page_list() and make it easy to document and add new checks in a readable fashion. Patch 2 gets rid of the obsolete page_mapping_inuse(). It's not strictly related to #3, but it was in the original submission and is a net simplification, so I kept it. Patch 3 implements used-once detection of mapped file pages. This patch: Moving the big conditional into its own predicate function makes the code a bit easier to read and allows for better commenting on the checks one-by-one. This is just cleaning up, no semantics should have been changed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:19 +07:00
case PAGEREF_RECLAIM:
case PAGEREF_RECLAIM_CLEAN:
; /* try to reclaim the page below */
}
/*
* Anonymous process memory has backing store?
* Try to allocate it some swap space here.
*/
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:44 +07:00
if (PageAnon(page) && !PageSwapCache(page)) {
if (!(sc->gfp_mask & __GFP_IO))
goto keep_locked;
if (!add_to_swap(page, page_list))
goto activate_locked;
mm: support madvise(MADV_FREE) Linux doesn't have an ability to free pages lazy while other OS already have been supported that named by madvise(MADV_FREE). The gain is clear that kernel can discard freed pages rather than swapping out or OOM if memory pressure happens. Without memory pressure, freed pages would be reused by userspace without another additional overhead(ex, page fault + allocation + zeroing). Jason Evans said: : Facebook has been using MAP_UNINITIALIZED : (https://lkml.org/lkml/2012/1/18/308) in some of its applications for : several years, but there are operational costs to maintaining this : out-of-tree in our kernel and in jemalloc, and we are anxious to retire it : in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it : increased throughput for much of our workload by ~5%, and although the : benefit has decreased using newer hardware and kernels, there is still : enough benefit that we cannot reasonably retire it without a replacement. : : Aside from Facebook operations, there are numerous broadly used : applications that would benefit from MADV_FREE. The ones that immediately : come to mind are redis, varnish, and MariaDB. I don't have much insight : into Android internals and development process, but I would hope to see : MADV_FREE support eventually end up there as well to benefit applications : linked with the integrated jemalloc. : : jemalloc will use MADV_FREE once it becomes available in the Linux kernel. : In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's : available: *BSD, OS X, Windows, and Solaris -- every platform except Linux : (and AIX, but I'm not sure it even compiles on AIX). The lack of : MADV_FREE on Linux forced me down a long series of increasingly : sophisticated heuristics for madvise() volume reduction, and even so this : remains a common performance issue for people using jemalloc on Linux. : Please integrate MADV_FREE; many people will benefit substantially. How it works: When madvise syscall is called, VM clears dirty bit of ptes of the range. If memory pressure happens, VM checks dirty bit of page table and if it found still "clean", it means it's a "lazyfree pages" so VM could discard the page instead of swapping out. Once there was store operation for the page before VM peek a page to reclaim, dirty bit is set so VM can swap out the page instead of discarding. One thing we should notice is that basically, MADV_FREE relies on dirty bit in page table entry to decide whether VM allows to discard the page or not. IOW, if page table entry includes marked dirty bit, VM shouldn't discard the page. However, as a example, if swap-in by read fault happens, page table entry doesn't have dirty bit so MADV_FREE could discard the page wrongly. For avoiding the problem, MADV_FREE did more checks with PageDirty and PageSwapCache. It worked out because swapped-in page lives on swap cache and since it is evicted from the swap cache, the page has PG_dirty flag. So both page flags check effectively prevent wrong discarding by MADV_FREE. However, a problem in above logic is that swapped-in page has PG_dirty still after they are removed from swap cache so VM cannot consider the page as freeable any more even if madvise_free is called in future. Look at below example for detail. ptr = malloc(); memset(ptr); .. .. .. heavy memory pressure so all of pages are swapped out .. .. var = *ptr; -> a page swapped-in and could be removed from swapcache. Then, page table doesn't mark dirty bit and page descriptor includes PG_dirty .. .. madvise_free(ptr); -> It doesn't clear PG_dirty of the page. .. .. .. .. heavy memory pressure again. .. In this time, VM cannot discard the page because the page .. has *PG_dirty* To solve the problem, this patch clears PG_dirty if only the page is owned exclusively by current process when madvise is called because PG_dirty represents ptes's dirtiness in several processes so we could clear it only if we own it exclusively. Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc and hope glibc supports it) and jemalloc/tcmalloc already have supported the feature for other OS(ex, FreeBSD) barrios@blaptop:~/benchmark/ebizzy$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 12 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 2 Stepping: 3 CPU MHz: 3200.185 BogoMIPS: 6400.53 Virtualization: VT-x Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 32K L2 cache: 4096K NUMA node0 CPU(s): 0-11 ebizzy benchmark(./ebizzy -S 10 -n 512) Higher avg is better. vanilla-jemalloc MADV_free-jemalloc 1 thread records: 10 records: 10 avg: 2961.90 avg: 12069.70 std: 71.96(2.43%) std: 186.68(1.55%) max: 3070.00 max: 12385.00 min: 2796.00 min: 11746.00 2 thread records: 10 records: 10 avg: 5020.00 avg: 17827.00 std: 264.87(5.28%) std: 358.52(2.01%) max: 5244.00 max: 18760.00 min: 4251.00 min: 17382.00 4 thread records: 10 records: 10 avg: 8988.80 avg: 27930.80 std: 1175.33(13.08%) std: 3317.33(11.88%) max: 9508.00 max: 30879.00 min: 5477.00 min: 21024.00 8 thread records: 10 records: 10 avg: 13036.50 avg: 33739.40 std: 170.67(1.31%) std: 5146.22(15.25%) max: 13371.00 max: 40572.00 min: 12785.00 min: 24088.00 16 thread records: 10 records: 10 avg: 11092.40 avg: 31424.20 std: 710.60(6.41%) std: 3763.89(11.98%) max: 12446.00 max: 36635.00 min: 9949.00 min: 25669.00 32 thread records: 10 records: 10 avg: 11067.00 avg: 34495.80 std: 971.06(8.77%) std: 2721.36(7.89%) max: 12010.00 max: 38598.00 min: 9002.00 min: 30636.00 In summary, MADV_FREE is about much faster than MADV_DONTNEED. This patch (of 12): Add core MADV_FREE implementation. [akpm@linux-foundation.org: small cleanups] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jason Evans <je@fb.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Shaohua Li" <shli@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:54:53 +07:00
lazyfree = true;
may_enter_fs = 1;
mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered Further testing of the "Reduce system disruption due to kswapd" discovered a few problems. First and foremost, it's possible for pages under writeback to be freed which will lead to badness. Second, as pages were not being swapped the file LRU was being scanned faster and clean file pages were being reclaimed. In some cases this results in increased read IO to re-read data from disk. Third, more pages were being written from kswapd context which can adversly affect IO performance. Lastly, it was observed that PageDirty pages are not necessarily dirty on all filesystems (buffers can be clean while PageDirty is set and ->writepage generates no IO) and not all filesystems set PageWriteback when the page is being written (e.g. ext3). This disconnect confuses the reclaim stalling logic. This follow-up series is aimed at these problems. The tests were based on three kernels vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to kswapd" applied on top as per what should be in Andrew's tree right now lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel The first test used memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service. It starts with no background IO on a freshly created ext4 filesystem and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%) Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%) Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%) Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%) Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%) Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%) Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%) Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%) Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%) Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%) Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%) Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%) Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%) memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 23K/sec to just over 4K/second when there is 2385M of IO going on in the background. With current mmotm, there is no collapse in performance and with this follow-up series there is little change. swaptotal is the total amount of swap traffic. With mmotm and the follow-up series, the total amount of swapping is much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 11160152 10706748 10622316 Major Faults 46305 755 678 Swap Ins 260249 0 0 Swap Outs 683860 18 18 Direct pages scanned 0 678 2520 Kswapd pages scanned 6046108 8814900 1639279 Kswapd pages reclaimed 1081954 1172267 1094635 Direct pages reclaimed 0 566 2304 Kswapd efficiency 17% 13% 66% Kswapd velocity 5217.560 7618.953 1414.879 Direct efficiency 100% 83% 91% Direct velocity 0.000 0.586 2.175 Percentage direct scans 0% 0% 0% Zone normal velocity 5105.086 6824.681 671.158 Zone dma32 velocity 112.473 794.858 745.896 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 1929612.000 6861768.000 32821.000 Page writes file 1245752 6861750 32803 Page writes anon 683860 18 18 Page reclaim immediate 7484 40 239 Sector Reads 1130320 93996 86900 Sector Writes 13508052 10823500 11804436 Page rescued immediate 0 0 0 Slabs scanned 33536 27136 18560 Direct inode steals 0 0 0 Kswapd inode steals 8641 1035 0 Kswapd skipped wait 0 0 0 THP fault alloc 8 37 33 THP collapse alloc 508 552 515 THP splits 24 1 1 THP fault fallback 0 0 0 THP collapse fail 0 0 0 There are a number of observations to make here 1. Swap outs are almost eliminated. Swap ins are 0 indicating that the pages swapped were really unused anonymous pages. Related to that, major faults are much reduced. 2. kswapd efficiency was impacted by the initial series but with these follow-up patches, the efficiency is now at 66% indicating that far fewer pages were skipped during scanning due to dirty or writeback pages. 3. kswapd velocity is reduced indicating that fewer pages are being scanned with the follow-up series as kswapd now stalls when the tail of the LRU queue is full of unqueued dirty pages. The stall gives flushers a chance to catch-up so kswapd can reclaim clean pages when it wakes 4. In light of Zlatko's recent reports about zone scanning imbalances, mmtests now reports scanning velocity on a per-zone basis. With mainline, you can see that the scanning activity is dominated by the Normal zone with over 45 times more scanning in Normal than the DMA32 zone. With the series currently in mmotm, the ratio is slightly better but it is still the case that the bulk of scanning is in the highest zone. With this follow-up series, the ratio of scanning between the Normal and DMA32 zone is roughly equal. 5. As Dave Chinner observed, the current patches in mmotm increased the number of pages written from kswapd context which is expected to adversly impact IO performance. With the follow-up patches, far fewer pages are written from kswapd context than the mainline kernel 6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With the follow-up series, there is less slab shrinking activity and no inodes were reclaimed. 7. Note that "Sectors Read" is drastically reduced implying that the source data being used for the IO is not being aggressively discarded due to page reclaim skipping over dirty pages and reclaiming clean pages. Note that the reducion in reads could also be due to inode data not being re-read from disk after a slab shrink. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 166.99 32.09 33.44 Mean sda-await 853.64 192.76 185.43 Mean sda-r_await 6.31 9.24 5.97 Mean sda-w_await 2992.81 202.65 192.43 Max sda-avgqz 1409.91 718.75 698.98 Max sda-await 6665.74 3538.00 3124.23 Max sda-r_await 58.96 111.95 58.00 Max sda-w_await 28458.94 3977.29 3148.61 In light of the changes in writes from reclaim context, the number of reads and Dave Chinner's concerns about IO performance I took a closer look at the IO stats for the test disk. Few observations 1. The average queue size is reduced by the initial series and roughly the same with this follow up. 2. Average wait times for writes are reduced and as the IO is completing faster it at least implies that the gain is because flushers are writing the files efficiently instead of page reclaim getting in the way. 3. The reduction in maximum write latency is staggering. 28 seconds down to 3 seconds. Jan Kara asked how NFS is affected by all of this. Unstable pages can be taken into account as one of the patches in the series shows but it is still the case that filesystems with unusual handling of dirty or writeback could still be treated better. Tests like postmark, fsmark and largedd showed up nothing useful. On my test setup, pages are simply not being written back from reclaim context with or without the patches and there are no changes in performance. My test setup probably is just not strong enough network-wise to be really interesting. I ran a longer-lived memcached test with IO going to NFS instead of a local disk parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%) Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%) Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%) Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%) Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%) Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%) Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%) Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%) Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%) Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%) Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%) Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%) Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%) Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%) Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%) Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%) Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%) Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%) 1. Performance does not collapse due to IO which is good. IO is also completing faster. Note with mmotm, IO completes in a third of the time and faster again with this series applied 2. Swapping is reduced, although not eliminated. The figures for the follow-up look bad but it does vary a bit as the stalling is not perfect for nfs or filesystems like ext3 with unusual handling of dirty and writeback pages 3. There are swapins, particularly with larger amounts of IO indicating that active pages are being reclaimed. However, the number of much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 36339175 35025445 35219699 Major Faults 310964 27108 51887 Swap Ins 2176399 173069 333316 Swap Outs 3344050 357228 504824 Direct pages scanned 8972 77283 43242 Kswapd pages scanned 20899983 8939566 14772851 Kswapd pages reclaimed 6193156 5172605 5231026 Direct pages reclaimed 8450 73802 39514 Kswapd efficiency 29% 57% 35% Kswapd velocity 3929.743 1847.499 3058.840 Direct efficiency 94% 95% 91% Direct velocity 1.687 15.972 8.954 Percentage direct scans 0% 0% 0% Zone normal velocity 3721.907 939.103 2185.142 Zone dma32 velocity 209.522 924.368 882.651 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 4082185.000 526319.000 537114.000 Page writes file 738135 169091 32290 Page writes anon 3344050 357228 504824 Page reclaim immediate 9524 170 5595843 Sector Reads 8909900 861192 1483680 Sector Writes 13428980 1488744 2076800 Page rescued immediate 0 0 0 Slabs scanned 38016 31744 28672 Direct inode steals 0 0 0 Kswapd inode steals 424 0 0 Kswapd skipped wait 0 0 0 THP fault alloc 14 15 119 THP collapse alloc 1767 1569 1618 THP splits 30 29 25 THP fault fallback 0 0 0 THP collapse fail 8 5 0 Compaction stalls 17 41 100 Compaction success 7 31 95 Compaction failures 10 10 5 Page migrate success 7083 22157 62217 Page migrate failure 0 0 0 Compaction pages isolated 14847 48758 135830 Compaction migrate scanned 18328 48398 138929 Compaction free scanned 2000255 355827 1720269 Compaction cost 7 24 68 I guess the main takeaway again is the much reduced page writes from reclaim context and reduced reads. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 23.58 0.35 0.44 Mean sda-await 133.47 15.72 15.46 Mean sda-r_await 4.72 4.69 3.95 Mean sda-w_await 507.69 28.40 33.68 Max sda-avgqz 680.60 12.25 23.14 Max sda-await 3958.89 221.83 286.22 Max sda-r_await 63.86 61.23 67.29 Max sda-w_await 11710.38 883.57 1767.28 And as before, write wait times are much reduced. This patch: The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority" decides whether to writeback pages from reclaim context based on the number of dirty pages encountered. This situation is flagged too easily and flushers are not given the chance to catch up resulting in more pages being written from reclaim context and potentially impacting IO performance. The check for PageWriteback is also misplaced as it happens within a PageDirty check which is nonsense as the dirty may have been cleared for IO. The accounting is updated very late and pages that are already under writeback, were reactivated, could not unmapped or could not be released are all missed. Similarly, a page is considered congested for reasons other than being congested and pages that cannot be written out in the correct context are skipped. Finally, it considers stalling and writing back filesystem pages due to encountering dirty anonymous pages at the tail of the LRU which is dumb. This patch causes kswapd to begin writing filesystem pages from reclaim context only if page reclaim found that all filesystem pages at the tail of the LRU were unqueued dirty pages. Before it starts writing filesystem pages, it will stall to give flushers a chance to catch up. The decision on whether wait_iff_congested is also now determined by dirty filesystem pages only. Congested pages are based on whether the underlying BDI is congested regardless of the context of the reclaiming process. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:57 +07:00
/* Adding to swap updated mapping */
mapping = page_mapping(page);
} else if (unlikely(PageTransHuge(page))) {
/* Split file THP */
if (split_huge_page_to_list(page, page_list))
goto keep_locked;
mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered Further testing of the "Reduce system disruption due to kswapd" discovered a few problems. First and foremost, it's possible for pages under writeback to be freed which will lead to badness. Second, as pages were not being swapped the file LRU was being scanned faster and clean file pages were being reclaimed. In some cases this results in increased read IO to re-read data from disk. Third, more pages were being written from kswapd context which can adversly affect IO performance. Lastly, it was observed that PageDirty pages are not necessarily dirty on all filesystems (buffers can be clean while PageDirty is set and ->writepage generates no IO) and not all filesystems set PageWriteback when the page is being written (e.g. ext3). This disconnect confuses the reclaim stalling logic. This follow-up series is aimed at these problems. The tests were based on three kernels vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to kswapd" applied on top as per what should be in Andrew's tree right now lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel The first test used memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service. It starts with no background IO on a freshly created ext4 filesystem and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%) Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%) Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%) Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%) Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%) Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%) Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%) Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%) Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%) Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%) Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%) Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%) Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%) memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 23K/sec to just over 4K/second when there is 2385M of IO going on in the background. With current mmotm, there is no collapse in performance and with this follow-up series there is little change. swaptotal is the total amount of swap traffic. With mmotm and the follow-up series, the total amount of swapping is much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 11160152 10706748 10622316 Major Faults 46305 755 678 Swap Ins 260249 0 0 Swap Outs 683860 18 18 Direct pages scanned 0 678 2520 Kswapd pages scanned 6046108 8814900 1639279 Kswapd pages reclaimed 1081954 1172267 1094635 Direct pages reclaimed 0 566 2304 Kswapd efficiency 17% 13% 66% Kswapd velocity 5217.560 7618.953 1414.879 Direct efficiency 100% 83% 91% Direct velocity 0.000 0.586 2.175 Percentage direct scans 0% 0% 0% Zone normal velocity 5105.086 6824.681 671.158 Zone dma32 velocity 112.473 794.858 745.896 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 1929612.000 6861768.000 32821.000 Page writes file 1245752 6861750 32803 Page writes anon 683860 18 18 Page reclaim immediate 7484 40 239 Sector Reads 1130320 93996 86900 Sector Writes 13508052 10823500 11804436 Page rescued immediate 0 0 0 Slabs scanned 33536 27136 18560 Direct inode steals 0 0 0 Kswapd inode steals 8641 1035 0 Kswapd skipped wait 0 0 0 THP fault alloc 8 37 33 THP collapse alloc 508 552 515 THP splits 24 1 1 THP fault fallback 0 0 0 THP collapse fail 0 0 0 There are a number of observations to make here 1. Swap outs are almost eliminated. Swap ins are 0 indicating that the pages swapped were really unused anonymous pages. Related to that, major faults are much reduced. 2. kswapd efficiency was impacted by the initial series but with these follow-up patches, the efficiency is now at 66% indicating that far fewer pages were skipped during scanning due to dirty or writeback pages. 3. kswapd velocity is reduced indicating that fewer pages are being scanned with the follow-up series as kswapd now stalls when the tail of the LRU queue is full of unqueued dirty pages. The stall gives flushers a chance to catch-up so kswapd can reclaim clean pages when it wakes 4. In light of Zlatko's recent reports about zone scanning imbalances, mmtests now reports scanning velocity on a per-zone basis. With mainline, you can see that the scanning activity is dominated by the Normal zone with over 45 times more scanning in Normal than the DMA32 zone. With the series currently in mmotm, the ratio is slightly better but it is still the case that the bulk of scanning is in the highest zone. With this follow-up series, the ratio of scanning between the Normal and DMA32 zone is roughly equal. 5. As Dave Chinner observed, the current patches in mmotm increased the number of pages written from kswapd context which is expected to adversly impact IO performance. With the follow-up patches, far fewer pages are written from kswapd context than the mainline kernel 6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With the follow-up series, there is less slab shrinking activity and no inodes were reclaimed. 7. Note that "Sectors Read" is drastically reduced implying that the source data being used for the IO is not being aggressively discarded due to page reclaim skipping over dirty pages and reclaiming clean pages. Note that the reducion in reads could also be due to inode data not being re-read from disk after a slab shrink. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 166.99 32.09 33.44 Mean sda-await 853.64 192.76 185.43 Mean sda-r_await 6.31 9.24 5.97 Mean sda-w_await 2992.81 202.65 192.43 Max sda-avgqz 1409.91 718.75 698.98 Max sda-await 6665.74 3538.00 3124.23 Max sda-r_await 58.96 111.95 58.00 Max sda-w_await 28458.94 3977.29 3148.61 In light of the changes in writes from reclaim context, the number of reads and Dave Chinner's concerns about IO performance I took a closer look at the IO stats for the test disk. Few observations 1. The average queue size is reduced by the initial series and roughly the same with this follow up. 2. Average wait times for writes are reduced and as the IO is completing faster it at least implies that the gain is because flushers are writing the files efficiently instead of page reclaim getting in the way. 3. The reduction in maximum write latency is staggering. 28 seconds down to 3 seconds. Jan Kara asked how NFS is affected by all of this. Unstable pages can be taken into account as one of the patches in the series shows but it is still the case that filesystems with unusual handling of dirty or writeback could still be treated better. Tests like postmark, fsmark and largedd showed up nothing useful. On my test setup, pages are simply not being written back from reclaim context with or without the patches and there are no changes in performance. My test setup probably is just not strong enough network-wise to be really interesting. I ran a longer-lived memcached test with IO going to NFS instead of a local disk parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%) Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%) Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%) Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%) Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%) Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%) Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%) Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%) Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%) Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%) Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%) Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%) Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%) Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%) Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%) Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%) Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%) Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%) 1. Performance does not collapse due to IO which is good. IO is also completing faster. Note with mmotm, IO completes in a third of the time and faster again with this series applied 2. Swapping is reduced, although not eliminated. The figures for the follow-up look bad but it does vary a bit as the stalling is not perfect for nfs or filesystems like ext3 with unusual handling of dirty and writeback pages 3. There are swapins, particularly with larger amounts of IO indicating that active pages are being reclaimed. However, the number of much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 36339175 35025445 35219699 Major Faults 310964 27108 51887 Swap Ins 2176399 173069 333316 Swap Outs 3344050 357228 504824 Direct pages scanned 8972 77283 43242 Kswapd pages scanned 20899983 8939566 14772851 Kswapd pages reclaimed 6193156 5172605 5231026 Direct pages reclaimed 8450 73802 39514 Kswapd efficiency 29% 57% 35% Kswapd velocity 3929.743 1847.499 3058.840 Direct efficiency 94% 95% 91% Direct velocity 1.687 15.972 8.954 Percentage direct scans 0% 0% 0% Zone normal velocity 3721.907 939.103 2185.142 Zone dma32 velocity 209.522 924.368 882.651 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 4082185.000 526319.000 537114.000 Page writes file 738135 169091 32290 Page writes anon 3344050 357228 504824 Page reclaim immediate 9524 170 5595843 Sector Reads 8909900 861192 1483680 Sector Writes 13428980 1488744 2076800 Page rescued immediate 0 0 0 Slabs scanned 38016 31744 28672 Direct inode steals 0 0 0 Kswapd inode steals 424 0 0 Kswapd skipped wait 0 0 0 THP fault alloc 14 15 119 THP collapse alloc 1767 1569 1618 THP splits 30 29 25 THP fault fallback 0 0 0 THP collapse fail 8 5 0 Compaction stalls 17 41 100 Compaction success 7 31 95 Compaction failures 10 10 5 Page migrate success 7083 22157 62217 Page migrate failure 0 0 0 Compaction pages isolated 14847 48758 135830 Compaction migrate scanned 18328 48398 138929 Compaction free scanned 2000255 355827 1720269 Compaction cost 7 24 68 I guess the main takeaway again is the much reduced page writes from reclaim context and reduced reads. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 23.58 0.35 0.44 Mean sda-await 133.47 15.72 15.46 Mean sda-r_await 4.72 4.69 3.95 Mean sda-w_await 507.69 28.40 33.68 Max sda-avgqz 680.60 12.25 23.14 Max sda-await 3958.89 221.83 286.22 Max sda-r_await 63.86 61.23 67.29 Max sda-w_await 11710.38 883.57 1767.28 And as before, write wait times are much reduced. This patch: The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority" decides whether to writeback pages from reclaim context based on the number of dirty pages encountered. This situation is flagged too easily and flushers are not given the chance to catch up resulting in more pages being written from reclaim context and potentially impacting IO performance. The check for PageWriteback is also misplaced as it happens within a PageDirty check which is nonsense as the dirty may have been cleared for IO. The accounting is updated very late and pages that are already under writeback, were reactivated, could not unmapped or could not be released are all missed. Similarly, a page is considered congested for reasons other than being congested and pages that cannot be written out in the correct context are skipped. Finally, it considers stalling and writing back filesystem pages due to encountering dirty anonymous pages at the tail of the LRU which is dumb. This patch causes kswapd to begin writing filesystem pages from reclaim context only if page reclaim found that all filesystem pages at the tail of the LRU were unqueued dirty pages. Before it starts writing filesystem pages, it will stall to give flushers a chance to catch up. The decision on whether wait_iff_congested is also now determined by dirty filesystem pages only. Congested pages are based on whether the underlying BDI is congested regardless of the context of the reclaiming process. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:57 +07:00
}
VM_BUG_ON_PAGE(PageTransHuge(page), page);
/*
* The page is mapped into the page tables of one or more
* processes. Try to unmap it here.
*/
if (page_mapped(page) && mapping) {
mm: support madvise(MADV_FREE) Linux doesn't have an ability to free pages lazy while other OS already have been supported that named by madvise(MADV_FREE). The gain is clear that kernel can discard freed pages rather than swapping out or OOM if memory pressure happens. Without memory pressure, freed pages would be reused by userspace without another additional overhead(ex, page fault + allocation + zeroing). Jason Evans said: : Facebook has been using MAP_UNINITIALIZED : (https://lkml.org/lkml/2012/1/18/308) in some of its applications for : several years, but there are operational costs to maintaining this : out-of-tree in our kernel and in jemalloc, and we are anxious to retire it : in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it : increased throughput for much of our workload by ~5%, and although the : benefit has decreased using newer hardware and kernels, there is still : enough benefit that we cannot reasonably retire it without a replacement. : : Aside from Facebook operations, there are numerous broadly used : applications that would benefit from MADV_FREE. The ones that immediately : come to mind are redis, varnish, and MariaDB. I don't have much insight : into Android internals and development process, but I would hope to see : MADV_FREE support eventually end up there as well to benefit applications : linked with the integrated jemalloc. : : jemalloc will use MADV_FREE once it becomes available in the Linux kernel. : In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's : available: *BSD, OS X, Windows, and Solaris -- every platform except Linux : (and AIX, but I'm not sure it even compiles on AIX). The lack of : MADV_FREE on Linux forced me down a long series of increasingly : sophisticated heuristics for madvise() volume reduction, and even so this : remains a common performance issue for people using jemalloc on Linux. : Please integrate MADV_FREE; many people will benefit substantially. How it works: When madvise syscall is called, VM clears dirty bit of ptes of the range. If memory pressure happens, VM checks dirty bit of page table and if it found still "clean", it means it's a "lazyfree pages" so VM could discard the page instead of swapping out. Once there was store operation for the page before VM peek a page to reclaim, dirty bit is set so VM can swap out the page instead of discarding. One thing we should notice is that basically, MADV_FREE relies on dirty bit in page table entry to decide whether VM allows to discard the page or not. IOW, if page table entry includes marked dirty bit, VM shouldn't discard the page. However, as a example, if swap-in by read fault happens, page table entry doesn't have dirty bit so MADV_FREE could discard the page wrongly. For avoiding the problem, MADV_FREE did more checks with PageDirty and PageSwapCache. It worked out because swapped-in page lives on swap cache and since it is evicted from the swap cache, the page has PG_dirty flag. So both page flags check effectively prevent wrong discarding by MADV_FREE. However, a problem in above logic is that swapped-in page has PG_dirty still after they are removed from swap cache so VM cannot consider the page as freeable any more even if madvise_free is called in future. Look at below example for detail. ptr = malloc(); memset(ptr); .. .. .. heavy memory pressure so all of pages are swapped out .. .. var = *ptr; -> a page swapped-in and could be removed from swapcache. Then, page table doesn't mark dirty bit and page descriptor includes PG_dirty .. .. madvise_free(ptr); -> It doesn't clear PG_dirty of the page. .. .. .. .. heavy memory pressure again. .. In this time, VM cannot discard the page because the page .. has *PG_dirty* To solve the problem, this patch clears PG_dirty if only the page is owned exclusively by current process when madvise is called because PG_dirty represents ptes's dirtiness in several processes so we could clear it only if we own it exclusively. Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc and hope glibc supports it) and jemalloc/tcmalloc already have supported the feature for other OS(ex, FreeBSD) barrios@blaptop:~/benchmark/ebizzy$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 12 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 2 Stepping: 3 CPU MHz: 3200.185 BogoMIPS: 6400.53 Virtualization: VT-x Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 32K L2 cache: 4096K NUMA node0 CPU(s): 0-11 ebizzy benchmark(./ebizzy -S 10 -n 512) Higher avg is better. vanilla-jemalloc MADV_free-jemalloc 1 thread records: 10 records: 10 avg: 2961.90 avg: 12069.70 std: 71.96(2.43%) std: 186.68(1.55%) max: 3070.00 max: 12385.00 min: 2796.00 min: 11746.00 2 thread records: 10 records: 10 avg: 5020.00 avg: 17827.00 std: 264.87(5.28%) std: 358.52(2.01%) max: 5244.00 max: 18760.00 min: 4251.00 min: 17382.00 4 thread records: 10 records: 10 avg: 8988.80 avg: 27930.80 std: 1175.33(13.08%) std: 3317.33(11.88%) max: 9508.00 max: 30879.00 min: 5477.00 min: 21024.00 8 thread records: 10 records: 10 avg: 13036.50 avg: 33739.40 std: 170.67(1.31%) std: 5146.22(15.25%) max: 13371.00 max: 40572.00 min: 12785.00 min: 24088.00 16 thread records: 10 records: 10 avg: 11092.40 avg: 31424.20 std: 710.60(6.41%) std: 3763.89(11.98%) max: 12446.00 max: 36635.00 min: 9949.00 min: 25669.00 32 thread records: 10 records: 10 avg: 11067.00 avg: 34495.80 std: 971.06(8.77%) std: 2721.36(7.89%) max: 12010.00 max: 38598.00 min: 9002.00 min: 30636.00 In summary, MADV_FREE is about much faster than MADV_DONTNEED. This patch (of 12): Add core MADV_FREE implementation. [akpm@linux-foundation.org: small cleanups] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jason Evans <je@fb.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Shaohua Li" <shli@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:54:53 +07:00
switch (ret = try_to_unmap(page, lazyfree ?
(ttu_flags | TTU_BATCH_FLUSH | TTU_LZFREE) :
(ttu_flags | TTU_BATCH_FLUSH))) {
case SWAP_FAIL:
goto activate_locked;
case SWAP_AGAIN:
goto keep_locked;
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:44 +07:00
case SWAP_MLOCK:
goto cull_mlocked;
mm: support madvise(MADV_FREE) Linux doesn't have an ability to free pages lazy while other OS already have been supported that named by madvise(MADV_FREE). The gain is clear that kernel can discard freed pages rather than swapping out or OOM if memory pressure happens. Without memory pressure, freed pages would be reused by userspace without another additional overhead(ex, page fault + allocation + zeroing). Jason Evans said: : Facebook has been using MAP_UNINITIALIZED : (https://lkml.org/lkml/2012/1/18/308) in some of its applications for : several years, but there are operational costs to maintaining this : out-of-tree in our kernel and in jemalloc, and we are anxious to retire it : in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it : increased throughput for much of our workload by ~5%, and although the : benefit has decreased using newer hardware and kernels, there is still : enough benefit that we cannot reasonably retire it without a replacement. : : Aside from Facebook operations, there are numerous broadly used : applications that would benefit from MADV_FREE. The ones that immediately : come to mind are redis, varnish, and MariaDB. I don't have much insight : into Android internals and development process, but I would hope to see : MADV_FREE support eventually end up there as well to benefit applications : linked with the integrated jemalloc. : : jemalloc will use MADV_FREE once it becomes available in the Linux kernel. : In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's : available: *BSD, OS X, Windows, and Solaris -- every platform except Linux : (and AIX, but I'm not sure it even compiles on AIX). The lack of : MADV_FREE on Linux forced me down a long series of increasingly : sophisticated heuristics for madvise() volume reduction, and even so this : remains a common performance issue for people using jemalloc on Linux. : Please integrate MADV_FREE; many people will benefit substantially. How it works: When madvise syscall is called, VM clears dirty bit of ptes of the range. If memory pressure happens, VM checks dirty bit of page table and if it found still "clean", it means it's a "lazyfree pages" so VM could discard the page instead of swapping out. Once there was store operation for the page before VM peek a page to reclaim, dirty bit is set so VM can swap out the page instead of discarding. One thing we should notice is that basically, MADV_FREE relies on dirty bit in page table entry to decide whether VM allows to discard the page or not. IOW, if page table entry includes marked dirty bit, VM shouldn't discard the page. However, as a example, if swap-in by read fault happens, page table entry doesn't have dirty bit so MADV_FREE could discard the page wrongly. For avoiding the problem, MADV_FREE did more checks with PageDirty and PageSwapCache. It worked out because swapped-in page lives on swap cache and since it is evicted from the swap cache, the page has PG_dirty flag. So both page flags check effectively prevent wrong discarding by MADV_FREE. However, a problem in above logic is that swapped-in page has PG_dirty still after they are removed from swap cache so VM cannot consider the page as freeable any more even if madvise_free is called in future. Look at below example for detail. ptr = malloc(); memset(ptr); .. .. .. heavy memory pressure so all of pages are swapped out .. .. var = *ptr; -> a page swapped-in and could be removed from swapcache. Then, page table doesn't mark dirty bit and page descriptor includes PG_dirty .. .. madvise_free(ptr); -> It doesn't clear PG_dirty of the page. .. .. .. .. heavy memory pressure again. .. In this time, VM cannot discard the page because the page .. has *PG_dirty* To solve the problem, this patch clears PG_dirty if only the page is owned exclusively by current process when madvise is called because PG_dirty represents ptes's dirtiness in several processes so we could clear it only if we own it exclusively. Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc and hope glibc supports it) and jemalloc/tcmalloc already have supported the feature for other OS(ex, FreeBSD) barrios@blaptop:~/benchmark/ebizzy$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 12 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 2 Stepping: 3 CPU MHz: 3200.185 BogoMIPS: 6400.53 Virtualization: VT-x Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 32K L2 cache: 4096K NUMA node0 CPU(s): 0-11 ebizzy benchmark(./ebizzy -S 10 -n 512) Higher avg is better. vanilla-jemalloc MADV_free-jemalloc 1 thread records: 10 records: 10 avg: 2961.90 avg: 12069.70 std: 71.96(2.43%) std: 186.68(1.55%) max: 3070.00 max: 12385.00 min: 2796.00 min: 11746.00 2 thread records: 10 records: 10 avg: 5020.00 avg: 17827.00 std: 264.87(5.28%) std: 358.52(2.01%) max: 5244.00 max: 18760.00 min: 4251.00 min: 17382.00 4 thread records: 10 records: 10 avg: 8988.80 avg: 27930.80 std: 1175.33(13.08%) std: 3317.33(11.88%) max: 9508.00 max: 30879.00 min: 5477.00 min: 21024.00 8 thread records: 10 records: 10 avg: 13036.50 avg: 33739.40 std: 170.67(1.31%) std: 5146.22(15.25%) max: 13371.00 max: 40572.00 min: 12785.00 min: 24088.00 16 thread records: 10 records: 10 avg: 11092.40 avg: 31424.20 std: 710.60(6.41%) std: 3763.89(11.98%) max: 12446.00 max: 36635.00 min: 9949.00 min: 25669.00 32 thread records: 10 records: 10 avg: 11067.00 avg: 34495.80 std: 971.06(8.77%) std: 2721.36(7.89%) max: 12010.00 max: 38598.00 min: 9002.00 min: 30636.00 In summary, MADV_FREE is about much faster than MADV_DONTNEED. This patch (of 12): Add core MADV_FREE implementation. [akpm@linux-foundation.org: small cleanups] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jason Evans <je@fb.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Shaohua Li" <shli@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:54:53 +07:00
case SWAP_LZFREE:
goto lazyfree;
case SWAP_SUCCESS:
; /* try to free the page below */
}
}
if (PageDirty(page)) {
mm: vmscan: do not writeback filesystem pages in direct reclaim Testing from the XFS folk revealed that there is still too much I/O from the end of the LRU in kswapd. Previously it was considered acceptable by VM people for a small number of pages to be written back from reclaim with testing generally showing about 0.3% of pages reclaimed were written back (higher if memory was low). That writing back a small number of pages is ok has been heavily disputed for quite some time and Dave Chinner explained it well; It doesn't have to be a very high number to be a problem. IO is orders of magnitude slower than the CPU time it takes to flush a page, so the cost of making a bad flush decision is very high. And single page writeback from the LRU is almost always a bad flush decision. To complicate matters, filesystems respond very differently to requests from reclaim according to Christoph Hellwig; xfs tries to write it back if the requester is kswapd ext4 ignores the request if it's a delayed allocation btrfs ignores the request As a result, each filesystem has different performance characteristics when under memory pressure and there are many pages being dirtied. In some cases, the request is ignored entirely so the VM cannot depend on the IO being dispatched. The objective of this series is to reduce writing of filesystem-backed pages from reclaim, play nicely with writeback that is already in progress and throttle reclaim appropriately when writeback pages are encountered. The assumption is that the flushers will always write pages faster than if reclaim issues the IO. A secondary goal is to avoid the problem whereby direct reclaim splices two potentially deep call stacks together. There is a potential new problem as reclaim has less control over how long before a page in a particularly zone or container is cleaned and direct reclaimers depend on kswapd or flusher threads to do the necessary work. However, as filesystems sometimes ignore direct reclaim requests already, it is not expected to be a serious issue. Patch 1 disables writeback of filesystem pages from direct reclaim entirely. Anonymous pages are still written. Patch 2 removes dead code in lumpy reclaim as it is no longer able to synchronously write pages. This hurts lumpy reclaim but there is an expectation that compaction is used for hugepage allocations these days and lumpy reclaim's days are numbered. Patches 3-4 add warnings to XFS and ext4 if called from direct reclaim. With patch 1, this "never happens" and is intended to catch regressions in this logic in the future. Patch 5 disables writeback of filesystem pages from kswapd unless the priority is raised to the point where kswapd is considered to be in trouble. Patch 6 throttles reclaimers if too many dirty pages are being encountered and the zones or backing devices are congested. Patch 7 invalidates dirty pages found at the end of the LRU so they are reclaimed quickly after being written back rather than waiting for a reclaimer to find them I consider this series to be orthogonal to the writeback work but it is worth noting that the writeback work affects the viability of patch 8 in particular. I tested this on ext4 and xfs using fs_mark, a simple writeback test based on dd and a micro benchmark that does a streaming write to a large mapping (exercises use-once LRU logic) followed by streaming writes to a mix of anonymous and file-backed mappings. The command line for fs_mark when botted with 512M looked something like ./fs_mark -d /tmp/fsmark-2676 -D 100 -N 150 -n 150 -L 25 -t 1 -S0 -s 10485760 The number of files was adjusted depending on the amount of available memory so that the files created was about 3xRAM. For multiple threads, the -d switch is specified multiple times. The test machine is x86-64 with an older generation of AMD processor with 4 cores. The underlying storage was 4 disks configured as RAID-0 as this was the best configuration of storage I had available. Swap is on a separate disk. Dirty ratio was tuned to 40% instead of the default of 20%. Testing was run with and without monitors to both verify that the patches were operating as expected and that any performance gain was real and not due to interference from monitors. Here is a summary of results based on testing XFS. 512M1P-xfs Files/s mean 32.69 ( 0.00%) 34.44 ( 5.08%) 512M1P-xfs Elapsed Time fsmark 51.41 48.29 512M1P-xfs Elapsed Time simple-wb 114.09 108.61 512M1P-xfs Elapsed Time mmap-strm 113.46 109.34 512M1P-xfs Kswapd efficiency fsmark 62% 63% 512M1P-xfs Kswapd efficiency simple-wb 56% 61% 512M1P-xfs Kswapd efficiency mmap-strm 44% 42% 512M-xfs Files/s mean 30.78 ( 0.00%) 35.94 (14.36%) 512M-xfs Elapsed Time fsmark 56.08 48.90 512M-xfs Elapsed Time simple-wb 112.22 98.13 512M-xfs Elapsed Time mmap-strm 219.15 196.67 512M-xfs Kswapd efficiency fsmark 54% 56% 512M-xfs Kswapd efficiency simple-wb 54% 55% 512M-xfs Kswapd efficiency mmap-strm 45% 44% 512M-4X-xfs Files/s mean 30.31 ( 0.00%) 33.33 ( 9.06%) 512M-4X-xfs Elapsed Time fsmark 63.26 55.88 512M-4X-xfs Elapsed Time simple-wb 100.90 90.25 512M-4X-xfs Elapsed Time mmap-strm 261.73 255.38 512M-4X-xfs Kswapd efficiency fsmark 49% 50% 512M-4X-xfs Kswapd efficiency simple-wb 54% 56% 512M-4X-xfs Kswapd efficiency mmap-strm 37% 36% 512M-16X-xfs Files/s mean 60.89 ( 0.00%) 65.22 ( 6.64%) 512M-16X-xfs Elapsed Time fsmark 67.47 58.25 512M-16X-xfs Elapsed Time simple-wb 103.22 90.89 512M-16X-xfs Elapsed Time mmap-strm 237.09 198.82 512M-16X-xfs Kswapd efficiency fsmark 45% 46% 512M-16X-xfs Kswapd efficiency simple-wb 53% 55% 512M-16X-xfs Kswapd efficiency mmap-strm 33% 33% Up until 512-4X, the FSmark improvements were statistically significant. For the 4X and 16X tests the results were within standard deviations but just barely. The time to completion for all tests is improved which is an important result. In general, kswapd efficiency is not affected by skipping dirty pages. 1024M1P-xfs Files/s mean 39.09 ( 0.00%) 41.15 ( 5.01%) 1024M1P-xfs Elapsed Time fsmark 84.14 80.41 1024M1P-xfs Elapsed Time simple-wb 210.77 184.78 1024M1P-xfs Elapsed Time mmap-strm 162.00 160.34 1024M1P-xfs Kswapd efficiency fsmark 69% 75% 1024M1P-xfs Kswapd efficiency simple-wb 71% 77% 1024M1P-xfs Kswapd efficiency mmap-strm 43% 44% 1024M-xfs Files/s mean 35.45 ( 0.00%) 37.00 ( 4.19%) 1024M-xfs Elapsed Time fsmark 94.59 91.00 1024M-xfs Elapsed Time simple-wb 229.84 195.08 1024M-xfs Elapsed Time mmap-strm 405.38 440.29 1024M-xfs Kswapd efficiency fsmark 79% 71% 1024M-xfs Kswapd efficiency simple-wb 74% 74% 1024M-xfs Kswapd efficiency mmap-strm 39% 42% 1024M-4X-xfs Files/s mean 32.63 ( 0.00%) 35.05 ( 6.90%) 1024M-4X-xfs Elapsed Time fsmark 103.33 97.74 1024M-4X-xfs Elapsed Time simple-wb 204.48 178.57 1024M-4X-xfs Elapsed Time mmap-strm 528.38 511.88 1024M-4X-xfs Kswapd efficiency fsmark 81% 70% 1024M-4X-xfs Kswapd efficiency simple-wb 73% 72% 1024M-4X-xfs Kswapd efficiency mmap-strm 39% 38% 1024M-16X-xfs Files/s mean 42.65 ( 0.00%) 42.97 ( 0.74%) 1024M-16X-xfs Elapsed Time fsmark 103.11 99.11 1024M-16X-xfs Elapsed Time simple-wb 200.83 178.24 1024M-16X-xfs Elapsed Time mmap-strm 397.35 459.82 1024M-16X-xfs Kswapd efficiency fsmark 84% 69% 1024M-16X-xfs Kswapd efficiency simple-wb 74% 73% 1024M-16X-xfs Kswapd efficiency mmap-strm 39% 40% All FSMark tests up to 16X had statistically significant improvements. For the most part, tests are completing faster with the exception of the streaming writes to a mixture of anonymous and file-backed mappings which were slower in two cases In the cases where the mmap-strm tests were slower, there was more swapping due to dirty pages being skipped. The number of additional pages swapped is almost identical to the fewer number of pages written from reclaim. In other words, roughly the same number of pages were reclaimed but swapping was slower. As the test is a bit unrealistic and stresses memory heavily, the small shift is acceptable. 4608M1P-xfs Files/s mean 29.75 ( 0.00%) 30.96 ( 3.91%) 4608M1P-xfs Elapsed Time fsmark 512.01 492.15 4608M1P-xfs Elapsed Time simple-wb 618.18 566.24 4608M1P-xfs Elapsed Time mmap-strm 488.05 465.07 4608M1P-xfs Kswapd efficiency fsmark 93% 86% 4608M1P-xfs Kswapd efficiency simple-wb 88% 84% 4608M1P-xfs Kswapd efficiency mmap-strm 46% 45% 4608M-xfs Files/s mean 27.60 ( 0.00%) 28.85 ( 4.33%) 4608M-xfs Elapsed Time fsmark 555.96 532.34 4608M-xfs Elapsed Time simple-wb 659.72 571.85 4608M-xfs Elapsed Time mmap-strm 1082.57 1146.38 4608M-xfs Kswapd efficiency fsmark 89% 91% 4608M-xfs Kswapd efficiency simple-wb 88% 82% 4608M-xfs Kswapd efficiency mmap-strm 48% 46% 4608M-4X-xfs Files/s mean 26.00 ( 0.00%) 27.47 ( 5.35%) 4608M-4X-xfs Elapsed Time fsmark 592.91 564.00 4608M-4X-xfs Elapsed Time simple-wb 616.65 575.07 4608M-4X-xfs Elapsed Time mmap-strm 1773.02 1631.53 4608M-4X-xfs Kswapd efficiency fsmark 90% 94% 4608M-4X-xfs Kswapd efficiency simple-wb 87% 82% 4608M-4X-xfs Kswapd efficiency mmap-strm 43% 43% 4608M-16X-xfs Files/s mean 26.07 ( 0.00%) 26.42 ( 1.32%) 4608M-16X-xfs Elapsed Time fsmark 602.69 585.78 4608M-16X-xfs Elapsed Time simple-wb 606.60 573.81 4608M-16X-xfs Elapsed Time mmap-strm 1549.75 1441.86 4608M-16X-xfs Kswapd efficiency fsmark 98% 98% 4608M-16X-xfs Kswapd efficiency simple-wb 88% 82% 4608M-16X-xfs Kswapd efficiency mmap-strm 44% 42% Unlike the other tests, the fsmark results are not statistically significant but the min and max times are both improved and for the most part, tests completed faster. There are other indications that this is an improvement as well. For example, in the vast majority of cases, there were fewer pages scanned by direct reclaim implying in many cases that stalls due to direct reclaim are reduced. KSwapd is scanning more due to skipping dirty pages which is unfortunate but the CPU usage is still acceptable In an earlier set of tests, I used blktrace and in almost all cases throughput throughout the entire test was higher. However, I ended up discarding those results as recording blktrace data was too heavy for my liking. On a laptop, I plugged in a USB stick and ran a similar tests of tests using it as backing storage. A desktop environment was running and for the entire duration of the tests, firefox and gnome terminal were launching and exiting to vaguely simulate a user. 1024M-xfs Files/s mean 0.41 ( 0.00%) 0.44 ( 6.82%) 1024M-xfs Elapsed Time fsmark 2053.52 1641.03 1024M-xfs Elapsed Time simple-wb 1229.53 768.05 1024M-xfs Elapsed Time mmap-strm 4126.44 4597.03 1024M-xfs Kswapd efficiency fsmark 84% 85% 1024M-xfs Kswapd efficiency simple-wb 92% 81% 1024M-xfs Kswapd efficiency mmap-strm 60% 51% 1024M-xfs Avg wait ms fsmark 5404.53 4473.87 1024M-xfs Avg wait ms simple-wb 2541.35 1453.54 1024M-xfs Avg wait ms mmap-strm 3400.25 3852.53 The mmap-strm results were hurt because firefox launching had a tendency to push the test out of memory. On the postive side, firefox launched marginally faster with the patches applied. Time to completion for many tests was faster but more importantly - the "Avg wait" time as measured by iostat was far lower implying the system would be more responsive. It was also the case that "Avg wait ms" on the root filesystem was lower. I tested it manually and while the system felt slightly more responsive while copying data to a USB stick, it was marginal enough that it could be my imagination. This patch: do not writeback filesystem pages in direct reclaim. When kswapd is failing to keep zones above the min watermark, a process will enter direct reclaim in the same manner kswapd does. If a dirty page is encountered during the scan, this page is written to backing storage using mapping->writepage. This causes two problems. First, it can result in very deep call stacks, particularly if the target storage or filesystem are complex. Some filesystems ignore write requests from direct reclaim as a result. The second is that a single-page flush is inefficient in terms of IO. While there is an expectation that the elevator will merge requests, this does not always happen. Quoting Christoph Hellwig; The elevator has a relatively small window it can operate on, and can never fix up a bad large scale writeback pattern. This patch prevents direct reclaim writing back filesystem pages by checking if current is kswapd. Anonymous pages are still written to swap as there is not the equivalent of a flusher thread for anonymous pages. If the dirty pages cannot be written back, they are placed back on the LRU lists. There is now a direct dependency on dirty page balancing to prevent too many pages in the system being dirtied which would prevent reclaim making forward progress. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 07:07:38 +07:00
/*
* Only kswapd can writeback filesystem pages to
* avoid risk of stack overflow but only writeback
* if many dirty pages have been encountered.
mm: vmscan: do not writeback filesystem pages in direct reclaim Testing from the XFS folk revealed that there is still too much I/O from the end of the LRU in kswapd. Previously it was considered acceptable by VM people for a small number of pages to be written back from reclaim with testing generally showing about 0.3% of pages reclaimed were written back (higher if memory was low). That writing back a small number of pages is ok has been heavily disputed for quite some time and Dave Chinner explained it well; It doesn't have to be a very high number to be a problem. IO is orders of magnitude slower than the CPU time it takes to flush a page, so the cost of making a bad flush decision is very high. And single page writeback from the LRU is almost always a bad flush decision. To complicate matters, filesystems respond very differently to requests from reclaim according to Christoph Hellwig; xfs tries to write it back if the requester is kswapd ext4 ignores the request if it's a delayed allocation btrfs ignores the request As a result, each filesystem has different performance characteristics when under memory pressure and there are many pages being dirtied. In some cases, the request is ignored entirely so the VM cannot depend on the IO being dispatched. The objective of this series is to reduce writing of filesystem-backed pages from reclaim, play nicely with writeback that is already in progress and throttle reclaim appropriately when writeback pages are encountered. The assumption is that the flushers will always write pages faster than if reclaim issues the IO. A secondary goal is to avoid the problem whereby direct reclaim splices two potentially deep call stacks together. There is a potential new problem as reclaim has less control over how long before a page in a particularly zone or container is cleaned and direct reclaimers depend on kswapd or flusher threads to do the necessary work. However, as filesystems sometimes ignore direct reclaim requests already, it is not expected to be a serious issue. Patch 1 disables writeback of filesystem pages from direct reclaim entirely. Anonymous pages are still written. Patch 2 removes dead code in lumpy reclaim as it is no longer able to synchronously write pages. This hurts lumpy reclaim but there is an expectation that compaction is used for hugepage allocations these days and lumpy reclaim's days are numbered. Patches 3-4 add warnings to XFS and ext4 if called from direct reclaim. With patch 1, this "never happens" and is intended to catch regressions in this logic in the future. Patch 5 disables writeback of filesystem pages from kswapd unless the priority is raised to the point where kswapd is considered to be in trouble. Patch 6 throttles reclaimers if too many dirty pages are being encountered and the zones or backing devices are congested. Patch 7 invalidates dirty pages found at the end of the LRU so they are reclaimed quickly after being written back rather than waiting for a reclaimer to find them I consider this series to be orthogonal to the writeback work but it is worth noting that the writeback work affects the viability of patch 8 in particular. I tested this on ext4 and xfs using fs_mark, a simple writeback test based on dd and a micro benchmark that does a streaming write to a large mapping (exercises use-once LRU logic) followed by streaming writes to a mix of anonymous and file-backed mappings. The command line for fs_mark when botted with 512M looked something like ./fs_mark -d /tmp/fsmark-2676 -D 100 -N 150 -n 150 -L 25 -t 1 -S0 -s 10485760 The number of files was adjusted depending on the amount of available memory so that the files created was about 3xRAM. For multiple threads, the -d switch is specified multiple times. The test machine is x86-64 with an older generation of AMD processor with 4 cores. The underlying storage was 4 disks configured as RAID-0 as this was the best configuration of storage I had available. Swap is on a separate disk. Dirty ratio was tuned to 40% instead of the default of 20%. Testing was run with and without monitors to both verify that the patches were operating as expected and that any performance gain was real and not due to interference from monitors. Here is a summary of results based on testing XFS. 512M1P-xfs Files/s mean 32.69 ( 0.00%) 34.44 ( 5.08%) 512M1P-xfs Elapsed Time fsmark 51.41 48.29 512M1P-xfs Elapsed Time simple-wb 114.09 108.61 512M1P-xfs Elapsed Time mmap-strm 113.46 109.34 512M1P-xfs Kswapd efficiency fsmark 62% 63% 512M1P-xfs Kswapd efficiency simple-wb 56% 61% 512M1P-xfs Kswapd efficiency mmap-strm 44% 42% 512M-xfs Files/s mean 30.78 ( 0.00%) 35.94 (14.36%) 512M-xfs Elapsed Time fsmark 56.08 48.90 512M-xfs Elapsed Time simple-wb 112.22 98.13 512M-xfs Elapsed Time mmap-strm 219.15 196.67 512M-xfs Kswapd efficiency fsmark 54% 56% 512M-xfs Kswapd efficiency simple-wb 54% 55% 512M-xfs Kswapd efficiency mmap-strm 45% 44% 512M-4X-xfs Files/s mean 30.31 ( 0.00%) 33.33 ( 9.06%) 512M-4X-xfs Elapsed Time fsmark 63.26 55.88 512M-4X-xfs Elapsed Time simple-wb 100.90 90.25 512M-4X-xfs Elapsed Time mmap-strm 261.73 255.38 512M-4X-xfs Kswapd efficiency fsmark 49% 50% 512M-4X-xfs Kswapd efficiency simple-wb 54% 56% 512M-4X-xfs Kswapd efficiency mmap-strm 37% 36% 512M-16X-xfs Files/s mean 60.89 ( 0.00%) 65.22 ( 6.64%) 512M-16X-xfs Elapsed Time fsmark 67.47 58.25 512M-16X-xfs Elapsed Time simple-wb 103.22 90.89 512M-16X-xfs Elapsed Time mmap-strm 237.09 198.82 512M-16X-xfs Kswapd efficiency fsmark 45% 46% 512M-16X-xfs Kswapd efficiency simple-wb 53% 55% 512M-16X-xfs Kswapd efficiency mmap-strm 33% 33% Up until 512-4X, the FSmark improvements were statistically significant. For the 4X and 16X tests the results were within standard deviations but just barely. The time to completion for all tests is improved which is an important result. In general, kswapd efficiency is not affected by skipping dirty pages. 1024M1P-xfs Files/s mean 39.09 ( 0.00%) 41.15 ( 5.01%) 1024M1P-xfs Elapsed Time fsmark 84.14 80.41 1024M1P-xfs Elapsed Time simple-wb 210.77 184.78 1024M1P-xfs Elapsed Time mmap-strm 162.00 160.34 1024M1P-xfs Kswapd efficiency fsmark 69% 75% 1024M1P-xfs Kswapd efficiency simple-wb 71% 77% 1024M1P-xfs Kswapd efficiency mmap-strm 43% 44% 1024M-xfs Files/s mean 35.45 ( 0.00%) 37.00 ( 4.19%) 1024M-xfs Elapsed Time fsmark 94.59 91.00 1024M-xfs Elapsed Time simple-wb 229.84 195.08 1024M-xfs Elapsed Time mmap-strm 405.38 440.29 1024M-xfs Kswapd efficiency fsmark 79% 71% 1024M-xfs Kswapd efficiency simple-wb 74% 74% 1024M-xfs Kswapd efficiency mmap-strm 39% 42% 1024M-4X-xfs Files/s mean 32.63 ( 0.00%) 35.05 ( 6.90%) 1024M-4X-xfs Elapsed Time fsmark 103.33 97.74 1024M-4X-xfs Elapsed Time simple-wb 204.48 178.57 1024M-4X-xfs Elapsed Time mmap-strm 528.38 511.88 1024M-4X-xfs Kswapd efficiency fsmark 81% 70% 1024M-4X-xfs Kswapd efficiency simple-wb 73% 72% 1024M-4X-xfs Kswapd efficiency mmap-strm 39% 38% 1024M-16X-xfs Files/s mean 42.65 ( 0.00%) 42.97 ( 0.74%) 1024M-16X-xfs Elapsed Time fsmark 103.11 99.11 1024M-16X-xfs Elapsed Time simple-wb 200.83 178.24 1024M-16X-xfs Elapsed Time mmap-strm 397.35 459.82 1024M-16X-xfs Kswapd efficiency fsmark 84% 69% 1024M-16X-xfs Kswapd efficiency simple-wb 74% 73% 1024M-16X-xfs Kswapd efficiency mmap-strm 39% 40% All FSMark tests up to 16X had statistically significant improvements. For the most part, tests are completing faster with the exception of the streaming writes to a mixture of anonymous and file-backed mappings which were slower in two cases In the cases where the mmap-strm tests were slower, there was more swapping due to dirty pages being skipped. The number of additional pages swapped is almost identical to the fewer number of pages written from reclaim. In other words, roughly the same number of pages were reclaimed but swapping was slower. As the test is a bit unrealistic and stresses memory heavily, the small shift is acceptable. 4608M1P-xfs Files/s mean 29.75 ( 0.00%) 30.96 ( 3.91%) 4608M1P-xfs Elapsed Time fsmark 512.01 492.15 4608M1P-xfs Elapsed Time simple-wb 618.18 566.24 4608M1P-xfs Elapsed Time mmap-strm 488.05 465.07 4608M1P-xfs Kswapd efficiency fsmark 93% 86% 4608M1P-xfs Kswapd efficiency simple-wb 88% 84% 4608M1P-xfs Kswapd efficiency mmap-strm 46% 45% 4608M-xfs Files/s mean 27.60 ( 0.00%) 28.85 ( 4.33%) 4608M-xfs Elapsed Time fsmark 555.96 532.34 4608M-xfs Elapsed Time simple-wb 659.72 571.85 4608M-xfs Elapsed Time mmap-strm 1082.57 1146.38 4608M-xfs Kswapd efficiency fsmark 89% 91% 4608M-xfs Kswapd efficiency simple-wb 88% 82% 4608M-xfs Kswapd efficiency mmap-strm 48% 46% 4608M-4X-xfs Files/s mean 26.00 ( 0.00%) 27.47 ( 5.35%) 4608M-4X-xfs Elapsed Time fsmark 592.91 564.00 4608M-4X-xfs Elapsed Time simple-wb 616.65 575.07 4608M-4X-xfs Elapsed Time mmap-strm 1773.02 1631.53 4608M-4X-xfs Kswapd efficiency fsmark 90% 94% 4608M-4X-xfs Kswapd efficiency simple-wb 87% 82% 4608M-4X-xfs Kswapd efficiency mmap-strm 43% 43% 4608M-16X-xfs Files/s mean 26.07 ( 0.00%) 26.42 ( 1.32%) 4608M-16X-xfs Elapsed Time fsmark 602.69 585.78 4608M-16X-xfs Elapsed Time simple-wb 606.60 573.81 4608M-16X-xfs Elapsed Time mmap-strm 1549.75 1441.86 4608M-16X-xfs Kswapd efficiency fsmark 98% 98% 4608M-16X-xfs Kswapd efficiency simple-wb 88% 82% 4608M-16X-xfs Kswapd efficiency mmap-strm 44% 42% Unlike the other tests, the fsmark results are not statistically significant but the min and max times are both improved and for the most part, tests completed faster. There are other indications that this is an improvement as well. For example, in the vast majority of cases, there were fewer pages scanned by direct reclaim implying in many cases that stalls due to direct reclaim are reduced. KSwapd is scanning more due to skipping dirty pages which is unfortunate but the CPU usage is still acceptable In an earlier set of tests, I used blktrace and in almost all cases throughput throughout the entire test was higher. However, I ended up discarding those results as recording blktrace data was too heavy for my liking. On a laptop, I plugged in a USB stick and ran a similar tests of tests using it as backing storage. A desktop environment was running and for the entire duration of the tests, firefox and gnome terminal were launching and exiting to vaguely simulate a user. 1024M-xfs Files/s mean 0.41 ( 0.00%) 0.44 ( 6.82%) 1024M-xfs Elapsed Time fsmark 2053.52 1641.03 1024M-xfs Elapsed Time simple-wb 1229.53 768.05 1024M-xfs Elapsed Time mmap-strm 4126.44 4597.03 1024M-xfs Kswapd efficiency fsmark 84% 85% 1024M-xfs Kswapd efficiency simple-wb 92% 81% 1024M-xfs Kswapd efficiency mmap-strm 60% 51% 1024M-xfs Avg wait ms fsmark 5404.53 4473.87 1024M-xfs Avg wait ms simple-wb 2541.35 1453.54 1024M-xfs Avg wait ms mmap-strm 3400.25 3852.53 The mmap-strm results were hurt because firefox launching had a tendency to push the test out of memory. On the postive side, firefox launched marginally faster with the patches applied. Time to completion for many tests was faster but more importantly - the "Avg wait" time as measured by iostat was far lower implying the system would be more responsive. It was also the case that "Avg wait ms" on the root filesystem was lower. I tested it manually and while the system felt slightly more responsive while copying data to a USB stick, it was marginal enough that it could be my imagination. This patch: do not writeback filesystem pages in direct reclaim. When kswapd is failing to keep zones above the min watermark, a process will enter direct reclaim in the same manner kswapd does. If a dirty page is encountered during the scan, this page is written to backing storage using mapping->writepage. This causes two problems. First, it can result in very deep call stacks, particularly if the target storage or filesystem are complex. Some filesystems ignore write requests from direct reclaim as a result. The second is that a single-page flush is inefficient in terms of IO. While there is an expectation that the elevator will merge requests, this does not always happen. Quoting Christoph Hellwig; The elevator has a relatively small window it can operate on, and can never fix up a bad large scale writeback pattern. This patch prevents direct reclaim writing back filesystem pages by checking if current is kswapd. Anonymous pages are still written to swap as there is not the equivalent of a flusher thread for anonymous pages. If the dirty pages cannot be written back, they are placed back on the LRU lists. There is now a direct dependency on dirty page balancing to prevent too many pages in the system being dirtied which would prevent reclaim making forward progress. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 07:07:38 +07:00
*/
if (page_is_file_cache(page) &&
(!current_is_kswapd() ||
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
!test_bit(PGDAT_DIRTY, &pgdat->flags))) {
/*
* Immediately reclaim when written back.
* Similar in principal to deactivate_page()
* except we already have the page isolated
* and know it's dirty
*/
inc_node_page_state(page, NR_VMSCAN_IMMEDIATE);
SetPageReclaim(page);
mm: vmscan: do not writeback filesystem pages in direct reclaim Testing from the XFS folk revealed that there is still too much I/O from the end of the LRU in kswapd. Previously it was considered acceptable by VM people for a small number of pages to be written back from reclaim with testing generally showing about 0.3% of pages reclaimed were written back (higher if memory was low). That writing back a small number of pages is ok has been heavily disputed for quite some time and Dave Chinner explained it well; It doesn't have to be a very high number to be a problem. IO is orders of magnitude slower than the CPU time it takes to flush a page, so the cost of making a bad flush decision is very high. And single page writeback from the LRU is almost always a bad flush decision. To complicate matters, filesystems respond very differently to requests from reclaim according to Christoph Hellwig; xfs tries to write it back if the requester is kswapd ext4 ignores the request if it's a delayed allocation btrfs ignores the request As a result, each filesystem has different performance characteristics when under memory pressure and there are many pages being dirtied. In some cases, the request is ignored entirely so the VM cannot depend on the IO being dispatched. The objective of this series is to reduce writing of filesystem-backed pages from reclaim, play nicely with writeback that is already in progress and throttle reclaim appropriately when writeback pages are encountered. The assumption is that the flushers will always write pages faster than if reclaim issues the IO. A secondary goal is to avoid the problem whereby direct reclaim splices two potentially deep call stacks together. There is a potential new problem as reclaim has less control over how long before a page in a particularly zone or container is cleaned and direct reclaimers depend on kswapd or flusher threads to do the necessary work. However, as filesystems sometimes ignore direct reclaim requests already, it is not expected to be a serious issue. Patch 1 disables writeback of filesystem pages from direct reclaim entirely. Anonymous pages are still written. Patch 2 removes dead code in lumpy reclaim as it is no longer able to synchronously write pages. This hurts lumpy reclaim but there is an expectation that compaction is used for hugepage allocations these days and lumpy reclaim's days are numbered. Patches 3-4 add warnings to XFS and ext4 if called from direct reclaim. With patch 1, this "never happens" and is intended to catch regressions in this logic in the future. Patch 5 disables writeback of filesystem pages from kswapd unless the priority is raised to the point where kswapd is considered to be in trouble. Patch 6 throttles reclaimers if too many dirty pages are being encountered and the zones or backing devices are congested. Patch 7 invalidates dirty pages found at the end of the LRU so they are reclaimed quickly after being written back rather than waiting for a reclaimer to find them I consider this series to be orthogonal to the writeback work but it is worth noting that the writeback work affects the viability of patch 8 in particular. I tested this on ext4 and xfs using fs_mark, a simple writeback test based on dd and a micro benchmark that does a streaming write to a large mapping (exercises use-once LRU logic) followed by streaming writes to a mix of anonymous and file-backed mappings. The command line for fs_mark when botted with 512M looked something like ./fs_mark -d /tmp/fsmark-2676 -D 100 -N 150 -n 150 -L 25 -t 1 -S0 -s 10485760 The number of files was adjusted depending on the amount of available memory so that the files created was about 3xRAM. For multiple threads, the -d switch is specified multiple times. The test machine is x86-64 with an older generation of AMD processor with 4 cores. The underlying storage was 4 disks configured as RAID-0 as this was the best configuration of storage I had available. Swap is on a separate disk. Dirty ratio was tuned to 40% instead of the default of 20%. Testing was run with and without monitors to both verify that the patches were operating as expected and that any performance gain was real and not due to interference from monitors. Here is a summary of results based on testing XFS. 512M1P-xfs Files/s mean 32.69 ( 0.00%) 34.44 ( 5.08%) 512M1P-xfs Elapsed Time fsmark 51.41 48.29 512M1P-xfs Elapsed Time simple-wb 114.09 108.61 512M1P-xfs Elapsed Time mmap-strm 113.46 109.34 512M1P-xfs Kswapd efficiency fsmark 62% 63% 512M1P-xfs Kswapd efficiency simple-wb 56% 61% 512M1P-xfs Kswapd efficiency mmap-strm 44% 42% 512M-xfs Files/s mean 30.78 ( 0.00%) 35.94 (14.36%) 512M-xfs Elapsed Time fsmark 56.08 48.90 512M-xfs Elapsed Time simple-wb 112.22 98.13 512M-xfs Elapsed Time mmap-strm 219.15 196.67 512M-xfs Kswapd efficiency fsmark 54% 56% 512M-xfs Kswapd efficiency simple-wb 54% 55% 512M-xfs Kswapd efficiency mmap-strm 45% 44% 512M-4X-xfs Files/s mean 30.31 ( 0.00%) 33.33 ( 9.06%) 512M-4X-xfs Elapsed Time fsmark 63.26 55.88 512M-4X-xfs Elapsed Time simple-wb 100.90 90.25 512M-4X-xfs Elapsed Time mmap-strm 261.73 255.38 512M-4X-xfs Kswapd efficiency fsmark 49% 50% 512M-4X-xfs Kswapd efficiency simple-wb 54% 56% 512M-4X-xfs Kswapd efficiency mmap-strm 37% 36% 512M-16X-xfs Files/s mean 60.89 ( 0.00%) 65.22 ( 6.64%) 512M-16X-xfs Elapsed Time fsmark 67.47 58.25 512M-16X-xfs Elapsed Time simple-wb 103.22 90.89 512M-16X-xfs Elapsed Time mmap-strm 237.09 198.82 512M-16X-xfs Kswapd efficiency fsmark 45% 46% 512M-16X-xfs Kswapd efficiency simple-wb 53% 55% 512M-16X-xfs Kswapd efficiency mmap-strm 33% 33% Up until 512-4X, the FSmark improvements were statistically significant. For the 4X and 16X tests the results were within standard deviations but just barely. The time to completion for all tests is improved which is an important result. In general, kswapd efficiency is not affected by skipping dirty pages. 1024M1P-xfs Files/s mean 39.09 ( 0.00%) 41.15 ( 5.01%) 1024M1P-xfs Elapsed Time fsmark 84.14 80.41 1024M1P-xfs Elapsed Time simple-wb 210.77 184.78 1024M1P-xfs Elapsed Time mmap-strm 162.00 160.34 1024M1P-xfs Kswapd efficiency fsmark 69% 75% 1024M1P-xfs Kswapd efficiency simple-wb 71% 77% 1024M1P-xfs Kswapd efficiency mmap-strm 43% 44% 1024M-xfs Files/s mean 35.45 ( 0.00%) 37.00 ( 4.19%) 1024M-xfs Elapsed Time fsmark 94.59 91.00 1024M-xfs Elapsed Time simple-wb 229.84 195.08 1024M-xfs Elapsed Time mmap-strm 405.38 440.29 1024M-xfs Kswapd efficiency fsmark 79% 71% 1024M-xfs Kswapd efficiency simple-wb 74% 74% 1024M-xfs Kswapd efficiency mmap-strm 39% 42% 1024M-4X-xfs Files/s mean 32.63 ( 0.00%) 35.05 ( 6.90%) 1024M-4X-xfs Elapsed Time fsmark 103.33 97.74 1024M-4X-xfs Elapsed Time simple-wb 204.48 178.57 1024M-4X-xfs Elapsed Time mmap-strm 528.38 511.88 1024M-4X-xfs Kswapd efficiency fsmark 81% 70% 1024M-4X-xfs Kswapd efficiency simple-wb 73% 72% 1024M-4X-xfs Kswapd efficiency mmap-strm 39% 38% 1024M-16X-xfs Files/s mean 42.65 ( 0.00%) 42.97 ( 0.74%) 1024M-16X-xfs Elapsed Time fsmark 103.11 99.11 1024M-16X-xfs Elapsed Time simple-wb 200.83 178.24 1024M-16X-xfs Elapsed Time mmap-strm 397.35 459.82 1024M-16X-xfs Kswapd efficiency fsmark 84% 69% 1024M-16X-xfs Kswapd efficiency simple-wb 74% 73% 1024M-16X-xfs Kswapd efficiency mmap-strm 39% 40% All FSMark tests up to 16X had statistically significant improvements. For the most part, tests are completing faster with the exception of the streaming writes to a mixture of anonymous and file-backed mappings which were slower in two cases In the cases where the mmap-strm tests were slower, there was more swapping due to dirty pages being skipped. The number of additional pages swapped is almost identical to the fewer number of pages written from reclaim. In other words, roughly the same number of pages were reclaimed but swapping was slower. As the test is a bit unrealistic and stresses memory heavily, the small shift is acceptable. 4608M1P-xfs Files/s mean 29.75 ( 0.00%) 30.96 ( 3.91%) 4608M1P-xfs Elapsed Time fsmark 512.01 492.15 4608M1P-xfs Elapsed Time simple-wb 618.18 566.24 4608M1P-xfs Elapsed Time mmap-strm 488.05 465.07 4608M1P-xfs Kswapd efficiency fsmark 93% 86% 4608M1P-xfs Kswapd efficiency simple-wb 88% 84% 4608M1P-xfs Kswapd efficiency mmap-strm 46% 45% 4608M-xfs Files/s mean 27.60 ( 0.00%) 28.85 ( 4.33%) 4608M-xfs Elapsed Time fsmark 555.96 532.34 4608M-xfs Elapsed Time simple-wb 659.72 571.85 4608M-xfs Elapsed Time mmap-strm 1082.57 1146.38 4608M-xfs Kswapd efficiency fsmark 89% 91% 4608M-xfs Kswapd efficiency simple-wb 88% 82% 4608M-xfs Kswapd efficiency mmap-strm 48% 46% 4608M-4X-xfs Files/s mean 26.00 ( 0.00%) 27.47 ( 5.35%) 4608M-4X-xfs Elapsed Time fsmark 592.91 564.00 4608M-4X-xfs Elapsed Time simple-wb 616.65 575.07 4608M-4X-xfs Elapsed Time mmap-strm 1773.02 1631.53 4608M-4X-xfs Kswapd efficiency fsmark 90% 94% 4608M-4X-xfs Kswapd efficiency simple-wb 87% 82% 4608M-4X-xfs Kswapd efficiency mmap-strm 43% 43% 4608M-16X-xfs Files/s mean 26.07 ( 0.00%) 26.42 ( 1.32%) 4608M-16X-xfs Elapsed Time fsmark 602.69 585.78 4608M-16X-xfs Elapsed Time simple-wb 606.60 573.81 4608M-16X-xfs Elapsed Time mmap-strm 1549.75 1441.86 4608M-16X-xfs Kswapd efficiency fsmark 98% 98% 4608M-16X-xfs Kswapd efficiency simple-wb 88% 82% 4608M-16X-xfs Kswapd efficiency mmap-strm 44% 42% Unlike the other tests, the fsmark results are not statistically significant but the min and max times are both improved and for the most part, tests completed faster. There are other indications that this is an improvement as well. For example, in the vast majority of cases, there were fewer pages scanned by direct reclaim implying in many cases that stalls due to direct reclaim are reduced. KSwapd is scanning more due to skipping dirty pages which is unfortunate but the CPU usage is still acceptable In an earlier set of tests, I used blktrace and in almost all cases throughput throughout the entire test was higher. However, I ended up discarding those results as recording blktrace data was too heavy for my liking. On a laptop, I plugged in a USB stick and ran a similar tests of tests using it as backing storage. A desktop environment was running and for the entire duration of the tests, firefox and gnome terminal were launching and exiting to vaguely simulate a user. 1024M-xfs Files/s mean 0.41 ( 0.00%) 0.44 ( 6.82%) 1024M-xfs Elapsed Time fsmark 2053.52 1641.03 1024M-xfs Elapsed Time simple-wb 1229.53 768.05 1024M-xfs Elapsed Time mmap-strm 4126.44 4597.03 1024M-xfs Kswapd efficiency fsmark 84% 85% 1024M-xfs Kswapd efficiency simple-wb 92% 81% 1024M-xfs Kswapd efficiency mmap-strm 60% 51% 1024M-xfs Avg wait ms fsmark 5404.53 4473.87 1024M-xfs Avg wait ms simple-wb 2541.35 1453.54 1024M-xfs Avg wait ms mmap-strm 3400.25 3852.53 The mmap-strm results were hurt because firefox launching had a tendency to push the test out of memory. On the postive side, firefox launched marginally faster with the patches applied. Time to completion for many tests was faster but more importantly - the "Avg wait" time as measured by iostat was far lower implying the system would be more responsive. It was also the case that "Avg wait ms" on the root filesystem was lower. I tested it manually and while the system felt slightly more responsive while copying data to a USB stick, it was marginal enough that it could be my imagination. This patch: do not writeback filesystem pages in direct reclaim. When kswapd is failing to keep zones above the min watermark, a process will enter direct reclaim in the same manner kswapd does. If a dirty page is encountered during the scan, this page is written to backing storage using mapping->writepage. This causes two problems. First, it can result in very deep call stacks, particularly if the target storage or filesystem are complex. Some filesystems ignore write requests from direct reclaim as a result. The second is that a single-page flush is inefficient in terms of IO. While there is an expectation that the elevator will merge requests, this does not always happen. Quoting Christoph Hellwig; The elevator has a relatively small window it can operate on, and can never fix up a bad large scale writeback pattern. This patch prevents direct reclaim writing back filesystem pages by checking if current is kswapd. Anonymous pages are still written to swap as there is not the equivalent of a flusher thread for anonymous pages. If the dirty pages cannot be written back, they are placed back on the LRU lists. There is now a direct dependency on dirty page balancing to prevent too many pages in the system being dirtied which would prevent reclaim making forward progress. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 07:07:38 +07:00
goto keep_locked;
}
vmscan: factor out page reference checks The used-once mapped file page detection patchset. It is meant to help workloads with large amounts of shortly used file mappings, like rtorrent hashing a file or git when dealing with loose objects (git gc on a bigger site?). Right now, the VM activates referenced mapped file pages on first encounter on the inactive list and it takes a full memory cycle to reclaim them again. When those pages dominate memory, the system no longer has a meaningful notion of 'working set' and is required to give up the active list to make reclaim progress. Obviously, this results in rather bad scanning latencies and the wrong pages being reclaimed. This patch makes the VM be more careful about activating mapped file pages in the first place. The minimum granted lifetime without another memory access becomes an inactive list cycle instead of the full memory cycle, which is more natural given the mentioned loads. This test resembles a hashing rtorrent process. Sequentially, 32MB chunks of a file are mapped into memory, hashed (sha1) and unmapped again. While this happens, every 5 seconds a process is launched and its execution time taken: python2.4 -c 'import pydoc' old: max=2.31s mean=1.26s (0.34) new: max=1.25s mean=0.32s (0.32) find /etc -type f old: max=2.52s mean=1.44s (0.43) new: max=1.92s mean=0.12s (0.17) vim -c ':quit' old: max=6.14s mean=4.03s (0.49) new: max=3.48s mean=2.41s (0.25) mplayer --help old: max=8.08s mean=5.74s (1.02) new: max=3.79s mean=1.32s (0.81) overall hash time (stdev): old: time=1192.30 (12.85) thruput=25.78mb/s (0.27) new: time=1060.27 (32.58) thruput=29.02mb/s (0.88) (-11%) I also tested kernbench with regular IO streaming in the background to see whether the delayed activation of frequently used mapped file pages had a negative impact on performance in the presence of pressure on the inactive list. The patch made no significant difference in timing, neither for kernbench nor for the streaming IO throughput. The first patch submission raised concerns about the cost of the extra faults for actually activated pages on machines that have no hardware support for young page table entries. I created an artificial worst case scenario on an ARM machine with around 300MHz and 64MB of memory to figure out the dimensions involved. The test would mmap a file of 20MB, then 1. touch all its pages to fault them in 2. force one full scan cycle on the inactive file LRU -- old: mapping pages activated -- new: mapping pages inactive 3. touch the mapping pages again -- old and new: fault exceptions to set the young bits 4. force another full scan cycle on the inactive file LRU 5. touch the mapping pages one last time -- new: fault exceptions to set the young bits The test showed an overall increase of 6% in time over 100 iterations of the above (old: ~212sec, new: ~225sec). 13 secs total overhead / (100 * 5k pages), ignoring the execution time of the test itself, makes for about 25us overhead for every page that gets actually activated. Note: 1. File mapping the size of one third of main memory, _completely_ in active use across memory pressure - i.e., most pages referenced within one LRU cycle. This should be rare to non-existant, especially on such embedded setups. 2. Many huge activation batches. Those batches only occur when the working set fluctuates. If it changes completely between every full LRU cycle, you have problematic reclaim overhead anyway. 3. Access of activated pages at maximum speed: sequential loads from every single page without doing anything in between. In reality, the extra faults will get distributed between actual operations on the data. So even if a workload manages to get the VM into the situation of activating a third of memory in one go on such a setup, it will take 2.2 seconds instead 2.1 without the patch. Comparing the numbers (and my user-experience over several months), I think this change is an overall improvement to the VM. Patch 1 is only refactoring to break up that ugly compound conditional in shrink_page_list() and make it easy to document and add new checks in a readable fashion. Patch 2 gets rid of the obsolete page_mapping_inuse(). It's not strictly related to #3, but it was in the original submission and is a net simplification, so I kept it. Patch 3 implements used-once detection of mapped file pages. This patch: Moving the big conditional into its own predicate function makes the code a bit easier to read and allows for better commenting on the checks one-by-one. This is just cleaning up, no semantics should have been changed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: OSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 04:42:19 +07:00
if (references == PAGEREF_RECLAIM_CLEAN)
goto keep_locked;
if (!may_enter_fs)
goto keep_locked;
if (!sc->may_writepage)
goto keep_locked;
/*
* Page is dirty. Flush the TLB if a writable entry
* potentially exists to avoid CPU writes after IO
* starts and then write it out here.
*/
try_to_unmap_flush_dirty();
vmscan: narrow the scenarios in whcih lumpy reclaim uses synchrounous reclaim shrink_page_list() can decide to give up reclaiming a page under a number of conditions such as 1. trylock_page() failure 2. page is unevictable 3. zone reclaim and page is mapped 4. PageWriteback() is true 5. page is swapbacked and swap is full 6. add_to_swap() failure 7. page is dirty and gfpmask don't have GFP_IO, GFP_FS 8. page is pinned 9. IO queue is congested 10. pageout() start IO, but not finished With lumpy reclaim, failures result in entering synchronous lumpy reclaim but this can be unnecessary. In cases (2), (3), (5), (6), (7) and (8), there is no point retrying. This patch causes lumpy reclaim to abort when it is known it will fail. Case (9) is more interesting. current behavior is, 1. start shrink_page_list(async) 2. found queue_congested() 3. skip pageout write 4. still start shrink_page_list(sync) 5. wait on a lot of pages 6. again, found queue_congested() 7. give up pageout write again So, it's useless time wasting. However, just skipping page reclaim is also notgood as x86 allocating a huge page needs 512 pages for example. It can have more dirty pages than queue congestion threshold (~=128). After this patch, pageout() behaves as follows; - If order > PAGE_ALLOC_COSTLY_ORDER Ignore queue congestion always. - If order <= PAGE_ALLOC_COSTLY_ORDER skip write page and disable lumpy reclaim. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 04:21:42 +07:00
switch (pageout(page, mapping, sc)) {
case PAGE_KEEP:
goto keep_locked;
case PAGE_ACTIVATE:
goto activate_locked;
case PAGE_SUCCESS:
vmscan: narrow the scenarios in whcih lumpy reclaim uses synchrounous reclaim shrink_page_list() can decide to give up reclaiming a page under a number of conditions such as 1. trylock_page() failure 2. page is unevictable 3. zone reclaim and page is mapped 4. PageWriteback() is true 5. page is swapbacked and swap is full 6. add_to_swap() failure 7. page is dirty and gfpmask don't have GFP_IO, GFP_FS 8. page is pinned 9. IO queue is congested 10. pageout() start IO, but not finished With lumpy reclaim, failures result in entering synchronous lumpy reclaim but this can be unnecessary. In cases (2), (3), (5), (6), (7) and (8), there is no point retrying. This patch causes lumpy reclaim to abort when it is known it will fail. Case (9) is more interesting. current behavior is, 1. start shrink_page_list(async) 2. found queue_congested() 3. skip pageout write 4. still start shrink_page_list(sync) 5. wait on a lot of pages 6. again, found queue_congested() 7. give up pageout write again So, it's useless time wasting. However, just skipping page reclaim is also notgood as x86 allocating a huge page needs 512 pages for example. It can have more dirty pages than queue congestion threshold (~=128). After this patch, pageout() behaves as follows; - If order > PAGE_ALLOC_COSTLY_ORDER Ignore queue congestion always. - If order <= PAGE_ALLOC_COSTLY_ORDER skip write page and disable lumpy reclaim. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 04:21:42 +07:00
if (PageWriteback(page))
goto keep;
vmscan: narrow the scenarios in whcih lumpy reclaim uses synchrounous reclaim shrink_page_list() can decide to give up reclaiming a page under a number of conditions such as 1. trylock_page() failure 2. page is unevictable 3. zone reclaim and page is mapped 4. PageWriteback() is true 5. page is swapbacked and swap is full 6. add_to_swap() failure 7. page is dirty and gfpmask don't have GFP_IO, GFP_FS 8. page is pinned 9. IO queue is congested 10. pageout() start IO, but not finished With lumpy reclaim, failures result in entering synchronous lumpy reclaim but this can be unnecessary. In cases (2), (3), (5), (6), (7) and (8), there is no point retrying. This patch causes lumpy reclaim to abort when it is known it will fail. Case (9) is more interesting. current behavior is, 1. start shrink_page_list(async) 2. found queue_congested() 3. skip pageout write 4. still start shrink_page_list(sync) 5. wait on a lot of pages 6. again, found queue_congested() 7. give up pageout write again So, it's useless time wasting. However, just skipping page reclaim is also notgood as x86 allocating a huge page needs 512 pages for example. It can have more dirty pages than queue congestion threshold (~=128). After this patch, pageout() behaves as follows; - If order > PAGE_ALLOC_COSTLY_ORDER Ignore queue congestion always. - If order <= PAGE_ALLOC_COSTLY_ORDER skip write page and disable lumpy reclaim. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 04:21:42 +07:00
if (PageDirty(page))
goto keep;
vmscan: narrow the scenarios in whcih lumpy reclaim uses synchrounous reclaim shrink_page_list() can decide to give up reclaiming a page under a number of conditions such as 1. trylock_page() failure 2. page is unevictable 3. zone reclaim and page is mapped 4. PageWriteback() is true 5. page is swapbacked and swap is full 6. add_to_swap() failure 7. page is dirty and gfpmask don't have GFP_IO, GFP_FS 8. page is pinned 9. IO queue is congested 10. pageout() start IO, but not finished With lumpy reclaim, failures result in entering synchronous lumpy reclaim but this can be unnecessary. In cases (2), (3), (5), (6), (7) and (8), there is no point retrying. This patch causes lumpy reclaim to abort when it is known it will fail. Case (9) is more interesting. current behavior is, 1. start shrink_page_list(async) 2. found queue_congested() 3. skip pageout write 4. still start shrink_page_list(sync) 5. wait on a lot of pages 6. again, found queue_congested() 7. give up pageout write again So, it's useless time wasting. However, just skipping page reclaim is also notgood as x86 allocating a huge page needs 512 pages for example. It can have more dirty pages than queue congestion threshold (~=128). After this patch, pageout() behaves as follows; - If order > PAGE_ALLOC_COSTLY_ORDER Ignore queue congestion always. - If order <= PAGE_ALLOC_COSTLY_ORDER skip write page and disable lumpy reclaim. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 04:21:42 +07:00
/*
* A synchronous write - probably a ramdisk. Go
* ahead and try to reclaim the page.
*/
if (!trylock_page(page))
goto keep;
if (PageDirty(page) || PageWriteback(page))
goto keep_locked;
mapping = page_mapping(page);
case PAGE_CLEAN:
; /* try to free the page below */
}
}
/*
* If the page has buffers, try to free the buffer mappings
* associated with this page. If we succeed we try to free
* the page as well.
*
* We do this even if the page is PageDirty().
* try_to_release_page() does not perform I/O, but it is
* possible for a page to have PageDirty set, but it is actually
* clean (all its buffers are clean). This happens if the
* buffers were written out directly, with submit_bh(). ext3
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
* will do this, as well as the blockdev mapping.
* try_to_release_page() will discover that cleanness and will
* drop the buffers and mark the page clean - it can be freed.
*
* Rarely, pages can have buffers and no ->mapping. These are
* the pages which were not successfully invalidated in
* truncate_complete_page(). We try to drop those buffers here
* and if that worked, and the page is no longer mapped into
* process address space (page_count == 1) it can be freed.
* Otherwise, leave the page on the LRU so it is swappable.
*/
if (page_has_private(page)) {
if (!try_to_release_page(page, sc->gfp_mask))
goto activate_locked;
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 09:45:30 +07:00
if (!mapping && page_count(page) == 1) {
unlock_page(page);
if (put_page_testzero(page))
goto free_it;
else {
/*
* rare race with speculative reference.
* the speculative reference will free
* this page shortly, so we may
* increment nr_reclaimed here (and
* leave it off the LRU).
*/
nr_reclaimed++;
continue;
}
}
}
mm: support madvise(MADV_FREE) Linux doesn't have an ability to free pages lazy while other OS already have been supported that named by madvise(MADV_FREE). The gain is clear that kernel can discard freed pages rather than swapping out or OOM if memory pressure happens. Without memory pressure, freed pages would be reused by userspace without another additional overhead(ex, page fault + allocation + zeroing). Jason Evans said: : Facebook has been using MAP_UNINITIALIZED : (https://lkml.org/lkml/2012/1/18/308) in some of its applications for : several years, but there are operational costs to maintaining this : out-of-tree in our kernel and in jemalloc, and we are anxious to retire it : in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it : increased throughput for much of our workload by ~5%, and although the : benefit has decreased using newer hardware and kernels, there is still : enough benefit that we cannot reasonably retire it without a replacement. : : Aside from Facebook operations, there are numerous broadly used : applications that would benefit from MADV_FREE. The ones that immediately : come to mind are redis, varnish, and MariaDB. I don't have much insight : into Android internals and development process, but I would hope to see : MADV_FREE support eventually end up there as well to benefit applications : linked with the integrated jemalloc. : : jemalloc will use MADV_FREE once it becomes available in the Linux kernel. : In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's : available: *BSD, OS X, Windows, and Solaris -- every platform except Linux : (and AIX, but I'm not sure it even compiles on AIX). The lack of : MADV_FREE on Linux forced me down a long series of increasingly : sophisticated heuristics for madvise() volume reduction, and even so this : remains a common performance issue for people using jemalloc on Linux. : Please integrate MADV_FREE; many people will benefit substantially. How it works: When madvise syscall is called, VM clears dirty bit of ptes of the range. If memory pressure happens, VM checks dirty bit of page table and if it found still "clean", it means it's a "lazyfree pages" so VM could discard the page instead of swapping out. Once there was store operation for the page before VM peek a page to reclaim, dirty bit is set so VM can swap out the page instead of discarding. One thing we should notice is that basically, MADV_FREE relies on dirty bit in page table entry to decide whether VM allows to discard the page or not. IOW, if page table entry includes marked dirty bit, VM shouldn't discard the page. However, as a example, if swap-in by read fault happens, page table entry doesn't have dirty bit so MADV_FREE could discard the page wrongly. For avoiding the problem, MADV_FREE did more checks with PageDirty and PageSwapCache. It worked out because swapped-in page lives on swap cache and since it is evicted from the swap cache, the page has PG_dirty flag. So both page flags check effectively prevent wrong discarding by MADV_FREE. However, a problem in above logic is that swapped-in page has PG_dirty still after they are removed from swap cache so VM cannot consider the page as freeable any more even if madvise_free is called in future. Look at below example for detail. ptr = malloc(); memset(ptr); .. .. .. heavy memory pressure so all of pages are swapped out .. .. var = *ptr; -> a page swapped-in and could be removed from swapcache. Then, page table doesn't mark dirty bit and page descriptor includes PG_dirty .. .. madvise_free(ptr); -> It doesn't clear PG_dirty of the page. .. .. .. .. heavy memory pressure again. .. In this time, VM cannot discard the page because the page .. has *PG_dirty* To solve the problem, this patch clears PG_dirty if only the page is owned exclusively by current process when madvise is called because PG_dirty represents ptes's dirtiness in several processes so we could clear it only if we own it exclusively. Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc and hope glibc supports it) and jemalloc/tcmalloc already have supported the feature for other OS(ex, FreeBSD) barrios@blaptop:~/benchmark/ebizzy$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 12 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 2 Stepping: 3 CPU MHz: 3200.185 BogoMIPS: 6400.53 Virtualization: VT-x Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 32K L2 cache: 4096K NUMA node0 CPU(s): 0-11 ebizzy benchmark(./ebizzy -S 10 -n 512) Higher avg is better. vanilla-jemalloc MADV_free-jemalloc 1 thread records: 10 records: 10 avg: 2961.90 avg: 12069.70 std: 71.96(2.43%) std: 186.68(1.55%) max: 3070.00 max: 12385.00 min: 2796.00 min: 11746.00 2 thread records: 10 records: 10 avg: 5020.00 avg: 17827.00 std: 264.87(5.28%) std: 358.52(2.01%) max: 5244.00 max: 18760.00 min: 4251.00 min: 17382.00 4 thread records: 10 records: 10 avg: 8988.80 avg: 27930.80 std: 1175.33(13.08%) std: 3317.33(11.88%) max: 9508.00 max: 30879.00 min: 5477.00 min: 21024.00 8 thread records: 10 records: 10 avg: 13036.50 avg: 33739.40 std: 170.67(1.31%) std: 5146.22(15.25%) max: 13371.00 max: 40572.00 min: 12785.00 min: 24088.00 16 thread records: 10 records: 10 avg: 11092.40 avg: 31424.20 std: 710.60(6.41%) std: 3763.89(11.98%) max: 12446.00 max: 36635.00 min: 9949.00 min: 25669.00 32 thread records: 10 records: 10 avg: 11067.00 avg: 34495.80 std: 971.06(8.77%) std: 2721.36(7.89%) max: 12010.00 max: 38598.00 min: 9002.00 min: 30636.00 In summary, MADV_FREE is about much faster than MADV_DONTNEED. This patch (of 12): Add core MADV_FREE implementation. [akpm@linux-foundation.org: small cleanups] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jason Evans <je@fb.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Shaohua Li" <shli@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:54:53 +07:00
lazyfree:
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 04:47:51 +07:00
if (!mapping || !__remove_mapping(mapping, page, true))
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 16:00:48 +07:00
goto keep_locked;
/*
* At this point, we have no other references and there is
* no way to pick any more up (removed from LRU, removed
* from pagecache). Can use non-atomic bitops now (and
* we obviously don't have to worry about waking up a process
* waiting on the page lock, because there are no references.
*/
__ClearPageLocked(page);
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 09:45:30 +07:00
free_it:
mm: support madvise(MADV_FREE) Linux doesn't have an ability to free pages lazy while other OS already have been supported that named by madvise(MADV_FREE). The gain is clear that kernel can discard freed pages rather than swapping out or OOM if memory pressure happens. Without memory pressure, freed pages would be reused by userspace without another additional overhead(ex, page fault + allocation + zeroing). Jason Evans said: : Facebook has been using MAP_UNINITIALIZED : (https://lkml.org/lkml/2012/1/18/308) in some of its applications for : several years, but there are operational costs to maintaining this : out-of-tree in our kernel and in jemalloc, and we are anxious to retire it : in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it : increased throughput for much of our workload by ~5%, and although the : benefit has decreased using newer hardware and kernels, there is still : enough benefit that we cannot reasonably retire it without a replacement. : : Aside from Facebook operations, there are numerous broadly used : applications that would benefit from MADV_FREE. The ones that immediately : come to mind are redis, varnish, and MariaDB. I don't have much insight : into Android internals and development process, but I would hope to see : MADV_FREE support eventually end up there as well to benefit applications : linked with the integrated jemalloc. : : jemalloc will use MADV_FREE once it becomes available in the Linux kernel. : In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's : available: *BSD, OS X, Windows, and Solaris -- every platform except Linux : (and AIX, but I'm not sure it even compiles on AIX). The lack of : MADV_FREE on Linux forced me down a long series of increasingly : sophisticated heuristics for madvise() volume reduction, and even so this : remains a common performance issue for people using jemalloc on Linux. : Please integrate MADV_FREE; many people will benefit substantially. How it works: When madvise syscall is called, VM clears dirty bit of ptes of the range. If memory pressure happens, VM checks dirty bit of page table and if it found still "clean", it means it's a "lazyfree pages" so VM could discard the page instead of swapping out. Once there was store operation for the page before VM peek a page to reclaim, dirty bit is set so VM can swap out the page instead of discarding. One thing we should notice is that basically, MADV_FREE relies on dirty bit in page table entry to decide whether VM allows to discard the page or not. IOW, if page table entry includes marked dirty bit, VM shouldn't discard the page. However, as a example, if swap-in by read fault happens, page table entry doesn't have dirty bit so MADV_FREE could discard the page wrongly. For avoiding the problem, MADV_FREE did more checks with PageDirty and PageSwapCache. It worked out because swapped-in page lives on swap cache and since it is evicted from the swap cache, the page has PG_dirty flag. So both page flags check effectively prevent wrong discarding by MADV_FREE. However, a problem in above logic is that swapped-in page has PG_dirty still after they are removed from swap cache so VM cannot consider the page as freeable any more even if madvise_free is called in future. Look at below example for detail. ptr = malloc(); memset(ptr); .. .. .. heavy memory pressure so all of pages are swapped out .. .. var = *ptr; -> a page swapped-in and could be removed from swapcache. Then, page table doesn't mark dirty bit and page descriptor includes PG_dirty .. .. madvise_free(ptr); -> It doesn't clear PG_dirty of the page. .. .. .. .. heavy memory pressure again. .. In this time, VM cannot discard the page because the page .. has *PG_dirty* To solve the problem, this patch clears PG_dirty if only the page is owned exclusively by current process when madvise is called because PG_dirty represents ptes's dirtiness in several processes so we could clear it only if we own it exclusively. Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc and hope glibc supports it) and jemalloc/tcmalloc already have supported the feature for other OS(ex, FreeBSD) barrios@blaptop:~/benchmark/ebizzy$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 12 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 2 Stepping: 3 CPU MHz: 3200.185 BogoMIPS: 6400.53 Virtualization: VT-x Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 32K L2 cache: 4096K NUMA node0 CPU(s): 0-11 ebizzy benchmark(./ebizzy -S 10 -n 512) Higher avg is better. vanilla-jemalloc MADV_free-jemalloc 1 thread records: 10 records: 10 avg: 2961.90 avg: 12069.70 std: 71.96(2.43%) std: 186.68(1.55%) max: 3070.00 max: 12385.00 min: 2796.00 min: 11746.00 2 thread records: 10 records: 10 avg: 5020.00 avg: 17827.00 std: 264.87(5.28%) std: 358.52(2.01%) max: 5244.00 max: 18760.00 min: 4251.00 min: 17382.00 4 thread records: 10 records: 10 avg: 8988.80 avg: 27930.80 std: 1175.33(13.08%) std: 3317.33(11.88%) max: 9508.00 max: 30879.00 min: 5477.00 min: 21024.00 8 thread records: 10 records: 10 avg: 13036.50 avg: 33739.40 std: 170.67(1.31%) std: 5146.22(15.25%) max: 13371.00 max: 40572.00 min: 12785.00 min: 24088.00 16 thread records: 10 records: 10 avg: 11092.40 avg: 31424.20 std: 710.60(6.41%) std: 3763.89(11.98%) max: 12446.00 max: 36635.00 min: 9949.00 min: 25669.00 32 thread records: 10 records: 10 avg: 11067.00 avg: 34495.80 std: 971.06(8.77%) std: 2721.36(7.89%) max: 12010.00 max: 38598.00 min: 9002.00 min: 30636.00 In summary, MADV_FREE is about much faster than MADV_DONTNEED. This patch (of 12): Add core MADV_FREE implementation. [akpm@linux-foundation.org: small cleanups] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jason Evans <je@fb.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Shaohua Li" <shli@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 07:54:53 +07:00
if (ret == SWAP_LZFREE)
count_vm_event(PGLAZYFREED);
nr_reclaimed++;
/*
* Is there need to periodically free_page_list? It would
* appear not as the counts should be low
*/
list_add(&page->lru, &free_pages);
continue;
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:44 +07:00
cull_mlocked:
if (PageSwapCache(page))
try_to_free_swap(page);
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:44 +07:00
unlock_page(page);
list_add(&page->lru, &ret_pages);
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:44 +07:00
continue;
activate_locked:
/* Not a candidate for swapping, so reclaim swap space. */
if (PageSwapCache(page) && mem_cgroup_swap_full(page))
mm: try_to_free_swap replaces remove_exclusive_swap_page remove_exclusive_swap_page(): its problem is in living up to its name. It doesn't matter if someone else has a reference to the page (raised page_count); it doesn't matter if the page is mapped into userspace (raised page_mapcount - though that hints it may be worth keeping the swap): all that matters is that there be no more references to the swap (and no writeback in progress). swapoff (try_to_unuse) has been removing pages from swapcache for years, with no concern for page count or page mapcount, and we used to have a comment in lookup_swap_cache() recognizing that: if you go for a page of swapcache, you'll get the right page, but it could have been removed from swapcache by the time you get page lock. So, give up asking for exclusivity: get rid of remove_exclusive_swap_page(), and remove_exclusive_swap_page_ref() and remove_exclusive_swap_page_count() which were spawned for the recent LRU work: replace them by the simpler try_to_free_swap() which just checks page_swapcount(). Similarly, remove the page_count limitation from free_swap_and_count(), but assume that it's worth holding on to the swap if page is mapped and swap nowhere near full. Add a vm_swap_full() test in free_swap_cache()? It would be consistent, but I think we probably have enough for now. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 05:39:36 +07:00
try_to_free_swap(page);
VM_BUG_ON_PAGE(PageActive(page), page);
SetPageActive(page);
pgactivate++;
keep_locked:
unlock_page(page);
keep:
list_add(&page->lru, &ret_pages);
VM_BUG_ON_PAGE(PageLRU(page) || PageUnevictable(page), page);
}
mem_cgroup_uncharge_list(&free_pages);
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 05:47:32 +07:00
try_to_unmap_flush();
free_hot_cold_page_list(&free_pages, true);
list_splice(&ret_pages, page_list);
[PATCH] Light weight event counters The remaining counters in page_state after the zoned VM counter patches have been applied are all just for show in /proc/vmstat. They have no essential function for the VM. We use a simple increment of per cpu variables. In order to avoid the most severe races we disable preempt. Preempt does not prevent the race between an increment and an interrupt handler incrementing the same statistics counter. However, that race is exceedingly rare, we may only loose one increment or so and there is no requirement (at least not in kernel) that the vm event counters have to be accurate. In the non preempt case this results in a simple increment for each counter. For many architectures this will be reduced by the compiler to a single instruction. This single instruction is atomic for i386 and x86_64. And therefore even the rare race condition in an interrupt is avoided for both architectures in most cases. The patchset also adds an off switch for embedded systems that allows a building of linux kernels without these counters. The implementation of these counters is through inline code that hopefully results in only a single instruction increment instruction being emitted (i386, x86_64) or in the increment being hidden though instruction concurrency (EPIC architectures such as ia64 can get that done). Benefits: - VM event counter operations usually reduce to a single inline instruction on i386 and x86_64. - No interrupt disable, only preempt disable for the preempt case. Preempt disable can also be avoided by moving the counter into a spinlock. - Handling is similar to zoned VM counters. - Simple and easily extendable. - Can be omitted to reduce memory use for embedded use. References: RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=113512330605497&w=2 RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=114988082814934&w=2 local_t http://marc.theaimsgroup.com/?l=linux-kernel&m=114991748606690&w=2 V2 http://marc.theaimsgroup.com/?t=115014808400007&r=1&w=2 V3 http://marc.theaimsgroup.com/?l=linux-kernel&m=115024767022346&w=2 V4 http://marc.theaimsgroup.com/?l=linux-kernel&m=115047968808926&w=2 Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 15:55:45 +07:00
count_vm_events(PGACTIVATE, pgactivate);
mm: memcontrol: rewrite uncharge API The memcg uncharging code that is involved towards the end of a page's lifetime - truncation, reclaim, swapout, migration - is impressively complicated and fragile. Because anonymous and file pages were always charged before they had their page->mapping established, uncharges had to happen when the page type could still be known from the context; as in unmap for anonymous, page cache removal for file and shmem pages, and swap cache truncation for swap pages. However, these operations happen well before the page is actually freed, and so a lot of synchronization is necessary: - Charging, uncharging, page migration, and charge migration all need to take a per-page bit spinlock as they could race with uncharging. - Swap cache truncation happens during both swap-in and swap-out, and possibly repeatedly before the page is actually freed. This means that the memcg swapout code is called from many contexts that make no sense and it has to figure out the direction from page state to make sure memory and memory+swap are always correctly charged. - On page migration, the old page might be unmapped but then reused, so memcg code has to prevent untimely uncharging in that case. Because this code - which should be a simple charge transfer - is so special-cased, it is not reusable for replace_page_cache(). But now that charged pages always have a page->mapping, introduce mem_cgroup_uncharge(), which is called after the final put_page(), when we know for sure that nobody is looking at the page anymore. For page migration, introduce mem_cgroup_migrate(), which is called after the migration is successful and the new page is fully rmapped. Because the old page is no longer uncharged after migration, prevent double charges by decoupling the page's memcg association (PCG_USED and pc->mem_cgroup) from the page holding an actual charge. The new bits PCG_MEM and PCG_MEMSW represent the respective charges and are transferred to the new page during migration. mem_cgroup_migrate() is suitable for replace_page_cache() as well, which gets rid of mem_cgroup_replace_page_cache(). However, care needs to be taken because both the source and the target page can already be charged and on the LRU when fuse is splicing: grab the page lock on the charge moving side to prevent changing pc->mem_cgroup of a page under migration. Also, the lruvecs of both pages change as we uncharge the old and charge the new during migration, and putback may race with us, so grab the lru lock and isolate the pages iff on LRU to prevent races and ensure the pages are on the right lruvec afterward. Swap accounting is massively simplified: because the page is no longer uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry before the final put_page() in page reclaim. Finally, page_cgroup changes are now protected by whatever protection the page itself offers: anonymous pages are charged under the page table lock, whereas page cache insertions, swapin, and migration hold the page lock. Uncharging happens under full exclusion with no outstanding references. Charging and uncharging also ensure that the page is off-LRU, which serializes against charge migration. Remove the very costly page_cgroup lock and set pc->flags non-atomically. [mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable] [vdavydov@parallels.com: fix flags definition] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Tested-by: Jet Chen <jet.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:19:22 +07:00
*ret_nr_dirty += nr_dirty;
*ret_nr_congested += nr_congested;
*ret_nr_unqueued_dirty += nr_unqueued_dirty;
mm: vmscan: throttle reclaim if encountering too many dirty pages under writeback Workloads that are allocating frequently and writing files place a large number of dirty pages on the LRU. With use-once logic, it is possible for them to reach the end of the LRU quickly requiring the reclaimer to scan more to find clean pages. Ordinarily, processes that are dirtying memory will get throttled by dirty balancing but this is a global heuristic and does not take into account that LRUs are maintained on a per-zone basis. This can lead to a situation whereby reclaim is scanning heavily, skipping over a large number of pages under writeback and recycling them around the LRU consuming CPU. This patch checks how many of the number of pages isolated from the LRU were dirty and under writeback. If a percentage of them under writeback, the process will be throttled if a backing device or the zone is congested. Note that this applies whether it is anonymous or file-backed pages that are under writeback meaning that swapping is potentially throttled. This is intentional due to the fact if the swap device is congested, scanning more pages and dispatching more IO is not going to help matters. The percentage that must be in writeback depends on the priority. At default priority, all of them must be dirty. At DEF_PRIORITY-1, 50% of them must be, DEF_PRIORITY-2, 25% etc. i.e. as pressure increases the greater the likelihood the process will get throttled to allow the flusher threads to make some progress. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 07:07:56 +07:00
*ret_nr_writeback += nr_writeback;
*ret_nr_immediate += nr_immediate;
return nr_reclaimed;
}
unsigned long reclaim_clean_pages_from_list(struct zone *zone,
struct list_head *page_list)
{
struct scan_control sc = {
.gfp_mask = GFP_KERNEL,
.priority = DEF_PRIORITY,
.may_unmap = 1,
};
unsigned long ret, dummy1, dummy2, dummy3, dummy4, dummy5;
struct page *page, *next;
LIST_HEAD(clean_pages);
list_for_each_entry_safe(page, next, page_list, lru) {
mm: avoid reinserting isolated balloon pages into LRU lists Isolated balloon pages can wrongly end up in LRU lists when migrate_pages() finishes its round without draining all the isolated page list. The same issue can happen when reclaim_clean_pages_from_list() tries to reclaim pages from an isolated page list, before migration, in the CMA path. Such balloon page leak opens a race window against LRU lists shrinkers that leads us to the following kernel panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffff810c2625>] shrink_page_list+0x24e/0x897 PGD 3cda2067 PUD 3d713067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 340 Comm: kswapd0 Not tainted 3.12.0-rc1-22626-g4367597 #87 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: shrink_page_list+0x24e/0x897 RSP: 0000:ffff88003da499b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88003e82bd60 RCX: 00000000000657d5 RDX: 0000000000000000 RSI: 000000000000031f RDI: ffff88003e82bd40 RBP: ffff88003da49ab0 R08: 0000000000000001 R09: 0000000081121a45 R10: ffffffff81121a45 R11: ffff88003c4a9a28 R12: ffff88003e82bd40 R13: ffff88003da0e800 R14: 0000000000000001 R15: ffff88003da49d58 FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000067d9000 CR3: 000000003ace5000 CR4: 00000000000407b0 Call Trace: shrink_inactive_list+0x240/0x3de shrink_lruvec+0x3e0/0x566 __shrink_zone+0x94/0x178 shrink_zone+0x3a/0x82 balance_pgdat+0x32a/0x4c2 kswapd+0x2f0/0x372 kthread+0xa2/0xaa ret_from_fork+0x7c/0xb0 Code: 80 7d 8f 01 48 83 95 68 ff ff ff 00 4c 89 e7 e8 5a 7b 00 00 48 85 c0 49 89 c5 75 08 80 7d 8f 00 74 3e eb 31 48 8b 80 18 01 00 00 <48> 8b 74 0d 48 8b 78 30 be 02 00 00 00 ff d2 eb RIP [<ffffffff810c2625>] shrink_page_list+0x24e/0x897 RSP <ffff88003da499b8> CR2: 0000000000000028 ---[ end trace 703d2451af6ffbfd ]--- Kernel panic - not syncing: Fatal exception This patch fixes the issue, by assuring the proper tests are made at putback_movable_pages() & reclaim_clean_pages_from_list() to avoid isolated balloon pages being wrongly reinserted in LRU lists. [akpm@linux-foundation.org: clarify awkward comment text] Signed-off-by: Rafael Aquini <aquini@redhat.com> Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-01 03:45:16 +07:00
if (page_is_file_cache(page) && !PageDirty(page) &&
!__PageMovable(page)) {
ClearPageActive(page);
list_move(&page->lru, &clean_pages);
}
}
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
ret = shrink_page_list(&clean_pages, zone->zone_pgdat, &sc,
TTU_UNMAP|TTU_IGNORE_ACCESS,
&dummy1, &dummy2, &dummy3, &dummy4, &dummy5, true);
list_splice(&clean_pages, page_list);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
mod_node_page_state(zone->zone_pgdat, NR_ISOLATED_FILE, -ret);
return ret;
}
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 18:03:16 +07:00
/*
* Attempt to remove the specified page from its LRU. Only take this page
* if it is of the appropriate PageActive status. Pages which are being
* freed elsewhere are also ignored.
*
* page: page to consider
* mode: one of the LRU isolation modes defined above
*
* returns 0 on success, -ve errno on failure.
*/
int __isolate_lru_page(struct page *page, isolate_mode_t mode)
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 18:03:16 +07:00
{
int ret = -EINVAL;
/* Only take pages on the LRU. */
if (!PageLRU(page))
return ret;
/* Compaction should not handle unevictable pages but CMA can do so */
if (PageUnevictable(page) && !(mode & ISOLATE_UNEVICTABLE))
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
return ret;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 18:03:16 +07:00
ret = -EBUSY;
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 09:08:01 +07:00
/*
* To minimise LRU disruption, the caller can indicate that it only
* wants to isolate pages it will be able to operate on without
* blocking - clean pages for the most part.
*
* ISOLATE_CLEAN means that only clean pages should be isolated. This
* is used by reclaim when it is cannot write to backing storage
*
* ISOLATE_ASYNC_MIGRATE is used to indicate that it only wants to pages
* that it is possible to migrate without blocking
*/
if (mode & (ISOLATE_CLEAN|ISOLATE_ASYNC_MIGRATE)) {
/* All the caller can do on PageWriteback is block */
if (PageWriteback(page))
return ret;
if (PageDirty(page)) {
struct address_space *mapping;
/* ISOLATE_CLEAN means only clean pages */
if (mode & ISOLATE_CLEAN)
return ret;
/*
* Only pages without mappings or that have a
* ->migratepage callback are possible to migrate
* without blocking
*/
mapping = page_mapping(page);
if (mapping && !mapping->a_ops->migratepage)
return ret;
}
}
if ((mode & ISOLATE_UNMAPPED) && page_mapped(page))
return ret;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 18:03:16 +07:00
if (likely(get_page_unless_zero(page))) {
/*
* Be careful not to clear PageLRU until after we're
* sure the page is not being freed elsewhere -- the
* page release code relies on it.
*/
ClearPageLRU(page);
ret = 0;
}
return ret;
}
mm, vmscan: Update all zone LRU sizes before updating memcg Minchan Kim reported setting the following warning on a 32-bit system although it can affect 64-bit systems. WARNING: CPU: 4 PID: 1322 at mm/memcontrol.c:998 mem_cgroup_update_lru_size+0x103/0x110 mem_cgroup_update_lru_size(f44b4000, 1, -7): zid 1 lru_size 1 but empty Modules linked in: CPU: 4 PID: 1322 Comm: cp Not tainted 4.7.0-rc4-mm1+ #143 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x76/0xaf __warn+0xea/0x110 ? mem_cgroup_update_lru_size+0x103/0x110 warn_slowpath_fmt+0x3b/0x40 mem_cgroup_update_lru_size+0x103/0x110 isolate_lru_pages.isra.61+0x2e2/0x360 shrink_active_list+0xac/0x2a0 ? __delay+0xe/0x10 shrink_node_memcg+0x53c/0x7a0 shrink_node+0xab/0x2a0 do_try_to_free_pages+0xc6/0x390 try_to_free_pages+0x245/0x590 LRU list contents and counts are updated separately. Counts are updated before pages are added to the LRU and updated after pages are removed. The warning above is from a check in mem_cgroup_update_lru_size that ensures that list sizes of zero are empty. The problem is that node-lru needs to account for highmem pages if CONFIG_HIGHMEM is set. One impact of the implementation is that the sizes are updated in multiple passes when pages from multiple zones were isolated. This happens whether HIGHMEM is set or not. When multiple zones are isolated, it's possible for a debugging check in memcg to be tripped. This patch forces all the zone counts to be updated before the memcg function is called. Link: http://lkml.kernel.org/r/1468588165-12461-6-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Minchan Kim <minchan@kernel.org> Reported-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:47:17 +07:00
/*
* Update LRU sizes after isolating pages. The LRU size updates must
* be complete before mem_cgroup_update_lru_size due to a santity check.
*/
static __always_inline void update_lru_sizes(struct lruvec *lruvec,
enum lru_list lru, unsigned long *nr_zone_taken,
unsigned long nr_taken)
{
int zid;
for (zid = 0; zid < MAX_NR_ZONES; zid++) {
if (!nr_zone_taken[zid])
continue;
__update_lru_size(lruvec, lru, zid, -nr_zone_taken[zid]);
}
#ifdef CONFIG_MEMCG
mem_cgroup_update_lru_size(lruvec, lru, -nr_taken);
#endif
}
/*
* zone_lru_lock is heavily contended. Some of the functions that
* shrink the lists perform better by taking out a batch of pages
* and working on them outside the LRU lock.
*
* For pagecache intensive workloads, this function is the hottest
* spot in the kernel (apart from copy_*_user functions).
*
* Appropriate locks must be held before calling this function.
*
* @nr_to_scan: The number of pages to look through on the list.
* @lruvec: The LRU vector to pull pages from.
* @dst: The temp list to put pages on to.
* @nr_scanned: The number of pages that were scanned.
* @sc: The scan_control struct for this reclaim session
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 18:03:16 +07:00
* @mode: One of the LRU isolation modes
* @lru: LRU list id for isolating
*
* returns how many pages were moved onto *@dst.
*/
static unsigned long isolate_lru_pages(unsigned long nr_to_scan,
struct lruvec *lruvec, struct list_head *dst,
unsigned long *nr_scanned, struct scan_control *sc,
isolate_mode_t mode, enum lru_list lru)
{
struct list_head *src = &lruvec->lists[lru];
unsigned long nr_taken = 0;
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
unsigned long nr_zone_taken[MAX_NR_ZONES] = { 0 };
mm: vmstat: account per-zone stalls and pages skipped during reclaim The vmstat allocstall was fairly useful in the general sense but node-based LRUs change that. It's important to know if a stall was for an address-limited allocation request as this will require skipping pages from other zones. This patch adds pgstall_* counters to replace allocstall. The sum of the counters will equal the old allocstall so it can be trivially recalculated. A high number of address-limited allocation requests may result in a lot of useless LRU scanning for suitable pages. As address-limited allocations require pages to be skipped, it's important to know how much useless LRU scanning took place so this patch adds pgskip* counters. This yields the following model 1. The number of address-space limited stalls can be accounted for (pgstall) 2. The amount of useless work required to reclaim the data is accounted (pgskip) 3. The total number of scans is available from pgscan_kswapd and pgscan_direct so from that the ratio of useful to useless scans can be calculated. [mgorman@techsingularity.net: s/pgstall/allocstall/] Link: http://lkml.kernel.org/r/1468404004-5085-3-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-33-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:46:59 +07:00
unsigned long nr_skipped[MAX_NR_ZONES] = { 0, };
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
unsigned long scan, nr_pages;
LIST_HEAD(pages_skipped);
for (scan = 0; scan < nr_to_scan && nr_taken < nr_to_scan &&
!list_empty(src);) {
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 18:03:16 +07:00
struct page *page;
page = lru_to_page(src);
prefetchw_prev_lru_page(page, src, flags);
VM_BUG_ON_PAGE(!PageLRU(page), page);
if (page_zonenum(page) > sc->reclaim_idx) {
list_move(&page->lru, &pages_skipped);
mm: vmstat: account per-zone stalls and pages skipped during reclaim The vmstat allocstall was fairly useful in the general sense but node-based LRUs change that. It's important to know if a stall was for an address-limited allocation request as this will require skipping pages from other zones. This patch adds pgstall_* counters to replace allocstall. The sum of the counters will equal the old allocstall so it can be trivially recalculated. A high number of address-limited allocation requests may result in a lot of useless LRU scanning for suitable pages. As address-limited allocations require pages to be skipped, it's important to know how much useless LRU scanning took place so this patch adds pgskip* counters. This yields the following model 1. The number of address-space limited stalls can be accounted for (pgstall) 2. The amount of useless work required to reclaim the data is accounted (pgskip) 3. The total number of scans is available from pgscan_kswapd and pgscan_direct so from that the ratio of useful to useless scans can be calculated. [mgorman@techsingularity.net: s/pgstall/allocstall/] Link: http://lkml.kernel.org/r/1468404004-5085-3-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-33-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:46:59 +07:00
nr_skipped[page_zonenum(page)]++;
continue;
}
/*
* Account for scanned and skipped separetly to avoid the pgdat
* being prematurely marked unreclaimable by pgdat_reclaimable.
*/
scan++;
switch (__isolate_lru_page(page, mode)) {
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 18:03:16 +07:00
case 0:
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
nr_pages = hpage_nr_pages(page);
nr_taken += nr_pages;
nr_zone_taken[page_zonenum(page)] += nr_pages;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 18:03:16 +07:00
list_move(&page->lru, dst);
break;
case -EBUSY:
/* else it is being freed elsewhere */
list_move(&page->lru, src);
continue;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 18:03:16 +07:00
default:
BUG();
}
}
/*
* Splice any skipped pages to the start of the LRU list. Note that
* this disrupts the LRU order when reclaiming for lower zones but
* we cannot splice to the tail. If we did then the SWAP_CLUSTER_MAX
* scanning would soon rescan the same pages to skip and put the
* system at risk of premature OOM.
*/
mm: vmstat: account per-zone stalls and pages skipped during reclaim The vmstat allocstall was fairly useful in the general sense but node-based LRUs change that. It's important to know if a stall was for an address-limited allocation request as this will require skipping pages from other zones. This patch adds pgstall_* counters to replace allocstall. The sum of the counters will equal the old allocstall so it can be trivially recalculated. A high number of address-limited allocation requests may result in a lot of useless LRU scanning for suitable pages. As address-limited allocations require pages to be skipped, it's important to know how much useless LRU scanning took place so this patch adds pgskip* counters. This yields the following model 1. The number of address-space limited stalls can be accounted for (pgstall) 2. The amount of useless work required to reclaim the data is accounted (pgskip) 3. The total number of scans is available from pgscan_kswapd and pgscan_direct so from that the ratio of useful to useless scans can be calculated. [mgorman@techsingularity.net: s/pgstall/allocstall/] Link: http://lkml.kernel.org/r/1468404004-5085-3-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-33-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:46:59 +07:00
if (!list_empty(&pages_skipped)) {
int zid;
unsigned long total_skipped = 0;
mm: vmstat: account per-zone stalls and pages skipped during reclaim The vmstat allocstall was fairly useful in the general sense but node-based LRUs change that. It's important to know if a stall was for an address-limited allocation request as this will require skipping pages from other zones. This patch adds pgstall_* counters to replace allocstall. The sum of the counters will equal the old allocstall so it can be trivially recalculated. A high number of address-limited allocation requests may result in a lot of useless LRU scanning for suitable pages. As address-limited allocations require pages to be skipped, it's important to know how much useless LRU scanning took place so this patch adds pgskip* counters. This yields the following model 1. The number of address-space limited stalls can be accounted for (pgstall) 2. The amount of useless work required to reclaim the data is accounted (pgskip) 3. The total number of scans is available from pgscan_kswapd and pgscan_direct so from that the ratio of useful to useless scans can be calculated. [mgorman@techsingularity.net: s/pgstall/allocstall/] Link: http://lkml.kernel.org/r/1468404004-5085-3-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-33-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:46:59 +07:00
for (zid = 0; zid < MAX_NR_ZONES; zid++) {
if (!nr_skipped[zid])
continue;
__count_zid_vm_events(PGSCAN_SKIP, zid, nr_skipped[zid]);
total_skipped += nr_skipped[zid];
mm: vmstat: account per-zone stalls and pages skipped during reclaim The vmstat allocstall was fairly useful in the general sense but node-based LRUs change that. It's important to know if a stall was for an address-limited allocation request as this will require skipping pages from other zones. This patch adds pgstall_* counters to replace allocstall. The sum of the counters will equal the old allocstall so it can be trivially recalculated. A high number of address-limited allocation requests may result in a lot of useless LRU scanning for suitable pages. As address-limited allocations require pages to be skipped, it's important to know how much useless LRU scanning took place so this patch adds pgskip* counters. This yields the following model 1. The number of address-space limited stalls can be accounted for (pgstall) 2. The amount of useless work required to reclaim the data is accounted (pgskip) 3. The total number of scans is available from pgscan_kswapd and pgscan_direct so from that the ratio of useful to useless scans can be calculated. [mgorman@techsingularity.net: s/pgstall/allocstall/] Link: http://lkml.kernel.org/r/1468404004-5085-3-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-33-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:46:59 +07:00
}
/*
* Account skipped pages as a partial scan as the pgdat may be
* close to unreclaimable. If the LRU list is empty, account
* skipped pages as a full scan.
*/
scan += list_empty(src) ? total_skipped : total_skipped >> 2;
list_splice(&pages_skipped, src);
mm: vmstat: account per-zone stalls and pages skipped during reclaim The vmstat allocstall was fairly useful in the general sense but node-based LRUs change that. It's important to know if a stall was for an address-limited allocation request as this will require skipping pages from other zones. This patch adds pgstall_* counters to replace allocstall. The sum of the counters will equal the old allocstall so it can be trivially recalculated. A high number of address-limited allocation requests may result in a lot of useless LRU scanning for suitable pages. As address-limited allocations require pages to be skipped, it's important to know how much useless LRU scanning took place so this patch adds pgskip* counters. This yields the following model 1. The number of address-space limited stalls can be accounted for (pgstall) 2. The amount of useless work required to reclaim the data is accounted (pgskip) 3. The total number of scans is available from pgscan_kswapd and pgscan_direct so from that the ratio of useful to useless scans can be calculated. [mgorman@techsingularity.net: s/pgstall/allocstall/] Link: http://lkml.kernel.org/r/1468404004-5085-3-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-33-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:46:59 +07:00
}
*nr_scanned = scan;
trace_mm_vmscan_lru_isolate(sc->reclaim_idx, sc->order, nr_to_scan, scan,
nr_taken, mode, is_file_lru(lru));
mm, vmscan: Update all zone LRU sizes before updating memcg Minchan Kim reported setting the following warning on a 32-bit system although it can affect 64-bit systems. WARNING: CPU: 4 PID: 1322 at mm/memcontrol.c:998 mem_cgroup_update_lru_size+0x103/0x110 mem_cgroup_update_lru_size(f44b4000, 1, -7): zid 1 lru_size 1 but empty Modules linked in: CPU: 4 PID: 1322 Comm: cp Not tainted 4.7.0-rc4-mm1+ #143 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x76/0xaf __warn+0xea/0x110 ? mem_cgroup_update_lru_size+0x103/0x110 warn_slowpath_fmt+0x3b/0x40 mem_cgroup_update_lru_size+0x103/0x110 isolate_lru_pages.isra.61+0x2e2/0x360 shrink_active_list+0xac/0x2a0 ? __delay+0xe/0x10 shrink_node_memcg+0x53c/0x7a0 shrink_node+0xab/0x2a0 do_try_to_free_pages+0xc6/0x390 try_to_free_pages+0x245/0x590 LRU list contents and counts are updated separately. Counts are updated before pages are added to the LRU and updated after pages are removed. The warning above is from a check in mem_cgroup_update_lru_size that ensures that list sizes of zero are empty. The problem is that node-lru needs to account for highmem pages if CONFIG_HIGHMEM is set. One impact of the implementation is that the sizes are updated in multiple passes when pages from multiple zones were isolated. This happens whether HIGHMEM is set or not. When multiple zones are isolated, it's possible for a debugging check in memcg to be tripped. This patch forces all the zone counts to be updated before the memcg function is called. Link: http://lkml.kernel.org/r/1468588165-12461-6-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Minchan Kim <minchan@kernel.org> Reported-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:47:17 +07:00
update_lru_sizes(lruvec, lru, nr_zone_taken, nr_taken);
return nr_taken;
}
vmscan: move isolate_lru_page() to vmscan.c On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:09 +07:00
/**
* isolate_lru_page - tries to isolate a page from its LRU list
* @page: page to isolate from its LRU list
*
* Isolates a @page from an LRU list, clears PageLRU and adjusts the
* vmstat statistic corresponding to whatever LRU list the page was on.
*
* Returns 0 if the page was removed from an LRU list.
* Returns -EBUSY if the page was not on an LRU list.
*
* The returned page will have PageLRU() cleared. If it was found on
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
* the active list, it will have PageActive set. If it was found on
* the unevictable list, it will have the PageUnevictable bit set. That flag
* may need to be cleared by the caller before letting the page go.
vmscan: move isolate_lru_page() to vmscan.c On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:09 +07:00
*
* The vmstat statistic corresponding to the list on which the page was
* found will be decremented.
*
* Restrictions:
* (1) Must be called with an elevated refcount on the page. This is a
* fundamentnal difference from isolate_lru_pages (which is called
* without a stable reference).
* (2) the lru_lock must not be held.
* (3) interrupts must be enabled.
*/
int isolate_lru_page(struct page *page)
{
int ret = -EBUSY;
VM_BUG_ON_PAGE(!page_count(page), page);
WARN_RATELIMIT(PageTail(page), "trying to isolate tail page");
mm: strictly require elevated page refcount in isolate_lru_page() isolate_lru_page() must be called only with stable reference to the page, this is what is written in the comment above it, this is reasonable. current isolate_lru_page() users and its page extra reference sources: mm/huge_memory.c: __collapse_huge_page_isolate() - reference from pte mm/memcontrol.c: mem_cgroup_move_parent() - get_page_unless_zero() mem_cgroup_move_charge_pte_range() - reference from pte mm/memory-failure.c: soft_offline_page() - fixed, reference from get_any_page() delete_from_lru_cache() - reference from caller or get_page_unless_zero() [ seems like there bug, because __memory_failure() can call page_action() for hpages tail, but it is ok for isolate_lru_page(), tail getted and not in lru] mm/memory_hotplug.c: do_migrate_range() - fixed, get_page_unless_zero() mm/mempolicy.c: migrate_page_add() - reference from pte mm/migrate.c: do_move_page_to_node_array() - reference from follow_page() mlock.c: - various external references mm/vmscan.c: putback_lru_page() - reference from isolate_lru_page() It seems that all isolate_lru_page() users are ready now for this restriction. So, let's replace redundant get_page_unless_zero() with get_page() and add page initial reference count check with VM_BUG_ON() Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:21 +07:00
vmscan: move isolate_lru_page() to vmscan.c On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:09 +07:00
if (PageLRU(page)) {
struct zone *zone = page_zone(page);
struct lruvec *lruvec;
vmscan: move isolate_lru_page() to vmscan.c On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:09 +07:00
spin_lock_irq(zone_lru_lock(zone));
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
lruvec = mem_cgroup_page_lruvec(page, zone->zone_pgdat);
mm: strictly require elevated page refcount in isolate_lru_page() isolate_lru_page() must be called only with stable reference to the page, this is what is written in the comment above it, this is reasonable. current isolate_lru_page() users and its page extra reference sources: mm/huge_memory.c: __collapse_huge_page_isolate() - reference from pte mm/memcontrol.c: mem_cgroup_move_parent() - get_page_unless_zero() mem_cgroup_move_charge_pte_range() - reference from pte mm/memory-failure.c: soft_offline_page() - fixed, reference from get_any_page() delete_from_lru_cache() - reference from caller or get_page_unless_zero() [ seems like there bug, because __memory_failure() can call page_action() for hpages tail, but it is ok for isolate_lru_page(), tail getted and not in lru] mm/memory_hotplug.c: do_migrate_range() - fixed, get_page_unless_zero() mm/mempolicy.c: migrate_page_add() - reference from pte mm/migrate.c: do_move_page_to_node_array() - reference from follow_page() mlock.c: - various external references mm/vmscan.c: putback_lru_page() - reference from isolate_lru_page() It seems that all isolate_lru_page() users are ready now for this restriction. So, let's replace redundant get_page_unless_zero() with get_page() and add page initial reference count check with VM_BUG_ON() Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:21 +07:00
if (PageLRU(page)) {
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
int lru = page_lru(page);
mm: strictly require elevated page refcount in isolate_lru_page() isolate_lru_page() must be called only with stable reference to the page, this is what is written in the comment above it, this is reasonable. current isolate_lru_page() users and its page extra reference sources: mm/huge_memory.c: __collapse_huge_page_isolate() - reference from pte mm/memcontrol.c: mem_cgroup_move_parent() - get_page_unless_zero() mem_cgroup_move_charge_pte_range() - reference from pte mm/memory-failure.c: soft_offline_page() - fixed, reference from get_any_page() delete_from_lru_cache() - reference from caller or get_page_unless_zero() [ seems like there bug, because __memory_failure() can call page_action() for hpages tail, but it is ok for isolate_lru_page(), tail getted and not in lru] mm/memory_hotplug.c: do_migrate_range() - fixed, get_page_unless_zero() mm/mempolicy.c: migrate_page_add() - reference from pte mm/migrate.c: do_move_page_to_node_array() - reference from follow_page() mlock.c: - various external references mm/vmscan.c: putback_lru_page() - reference from isolate_lru_page() It seems that all isolate_lru_page() users are ready now for this restriction. So, let's replace redundant get_page_unless_zero() with get_page() and add page initial reference count check with VM_BUG_ON() Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:21 +07:00
get_page(page);
vmscan: move isolate_lru_page() to vmscan.c On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:09 +07:00
ClearPageLRU(page);
del_page_from_lru_list(page, lruvec, lru);
ret = 0;
vmscan: move isolate_lru_page() to vmscan.c On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:09 +07:00
}
spin_unlock_irq(zone_lru_lock(zone));
vmscan: move isolate_lru_page() to vmscan.c On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:09 +07:00
}
return ret;
}
/*
* A direct reclaimer may isolate SWAP_CLUSTER_MAX pages from the LRU list and
* then get resheduled. When there are massive number of tasks doing page
* allocation, such sleeping direct reclaimers may keep piling up on each CPU,
* the LRU list will go small and be scanned faster than necessary, leading to
* unnecessary swapping, thrashing and OOM.
*/
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
static int too_many_isolated(struct pglist_data *pgdat, int file,
struct scan_control *sc)
{
unsigned long inactive, isolated;
if (current_is_kswapd())
return 0;
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use Because writeback wasn't cgroup aware before, the usual dirty throttling mechanism in balance_dirty_pages() didn't work for processes under memcg limit. The writeback path didn't know how much memory is available or how fast the dirty pages are being written out for a given memcg and balance_dirty_pages() didn't have any measure of IO back pressure for the memcg. To work around the issue, memcg implemented an ad-hoc dirty throttling mechanism in the direct reclaim path by stalling on pages under writeback which are encountered during direct reclaim scan. This is rather ugly and crude - none of the configurability, fairness, or bandwidth-proportional distribution of the normal path. The previous patches implemented proper memcg aware dirty throttling when cgroup writeback is in use making the ad-hoc mechanism unnecessary. This patch disables direct reclaim stalling for such case. Note: I disabled the parts which seemed obvious and it behaves fine while testing but my understanding of this code path is rudimentary and it's quite possible that I got something wrong. Please let me know if I got some wrong or more global_reclaim() sites should be updated. v2: The original patch removed the direct stalling mechanism which breaks legacy hierarchies. Conditionalize instead of removing. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:23:36 +07:00
if (!sane_reclaim(sc))
return 0;
if (file) {
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
inactive = node_page_state(pgdat, NR_INACTIVE_FILE);
isolated = node_page_state(pgdat, NR_ISOLATED_FILE);
} else {
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
inactive = node_page_state(pgdat, NR_INACTIVE_ANON);
isolated = node_page_state(pgdat, NR_ISOLATED_ANON);
}
mm/vmscan.c: avoid possible deadlock caused by too_many_isolated() Neil found that if too_many_isolated() returns true while performing direct reclaim we can end up waiting for other threads to complete their direct reclaim. If those threads are allowed to enter the FS or IO to free memory, but this thread is not, then it is possible that those threads will be waiting on this thread and so we get a circular deadlock. some task enters direct reclaim with GFP_KERNEL => too_many_isolated() false => vmscan and run into dirty pages => pageout() => take some FS lock => fs/block code does GFP_NOIO allocation => enter direct reclaim again => too_many_isolated() true => waiting for others to progress, however the other tasks may be circular waiting for the FS lock.. The fix is to let !__GFP_IO and !__GFP_FS direct reclaims enjoy higher priority than normal ones, by lowering the throttle threshold for the latter. Allowing ~1/8 isolated pages in normal is large enough. For example, for a 1GB LRU list, that's ~128MB isolated pages, or 1k blocked tasks (each isolates 32 4KB pages), or 64 blocked tasks per logical CPU (assuming 16 logical CPUs per NUMA node). So it's not likely some CPU goes idle waiting (when it could make progress) because of this limit: there are much more sleeping reclaim tasks than the number of CPU, so the task may well be blocked by some low level queue/lock anyway. Now !GFP_IOFS reclaims won't be waiting for GFP_IOFS reclaims to progress. They will be blocked only when there are too many concurrent !GFP_IOFS reclaims, however that's very unlikely because the IO-less direct reclaims is able to progress much more faster, and they won't deadlock each other. The threshold is raised high enough for them, so that there can be sufficient parallel progress of !GFP_IOFS reclaims. [akpm@linux-foundation.org: tweak comment] Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: NeilBrown <neilb@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-19 05:23:31 +07:00
/*
* GFP_NOIO/GFP_NOFS callers are allowed to isolate more pages, so they
* won't get blocked by normal direct-reclaimers, forming a circular
* deadlock.
*/
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 07:28:21 +07:00
if ((sc->gfp_mask & (__GFP_IO | __GFP_FS)) == (__GFP_IO | __GFP_FS))
mm/vmscan.c: avoid possible deadlock caused by too_many_isolated() Neil found that if too_many_isolated() returns true while performing direct reclaim we can end up waiting for other threads to complete their direct reclaim. If those threads are allowed to enter the FS or IO to free memory, but this thread is not, then it is possible that those threads will be waiting on this thread and so we get a circular deadlock. some task enters direct reclaim with GFP_KERNEL => too_many_isolated() false => vmscan and run into dirty pages => pageout() => take some FS lock => fs/block code does GFP_NOIO allocation => enter direct reclaim again => too_many_isolated() true => waiting for others to progress, however the other tasks may be circular waiting for the FS lock.. The fix is to let !__GFP_IO and !__GFP_FS direct reclaims enjoy higher priority than normal ones, by lowering the throttle threshold for the latter. Allowing ~1/8 isolated pages in normal is large enough. For example, for a 1GB LRU list, that's ~128MB isolated pages, or 1k blocked tasks (each isolates 32 4KB pages), or 64 blocked tasks per logical CPU (assuming 16 logical CPUs per NUMA node). So it's not likely some CPU goes idle waiting (when it could make progress) because of this limit: there are much more sleeping reclaim tasks than the number of CPU, so the task may well be blocked by some low level queue/lock anyway. Now !GFP_IOFS reclaims won't be waiting for GFP_IOFS reclaims to progress. They will be blocked only when there are too many concurrent !GFP_IOFS reclaims, however that's very unlikely because the IO-less direct reclaims is able to progress much more faster, and they won't deadlock each other. The threshold is raised high enough for them, so that there can be sufficient parallel progress of !GFP_IOFS reclaims. [akpm@linux-foundation.org: tweak comment] Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: NeilBrown <neilb@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-19 05:23:31 +07:00
inactive >>= 3;
return isolated > inactive;
}
static noinline_for_stack void
putback_inactive_pages(struct lruvec *lruvec, struct list_head *page_list)
{
struct zone_reclaim_stat *reclaim_stat = &lruvec->reclaim_stat;
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
struct pglist_data *pgdat = lruvec_pgdat(lruvec);
LIST_HEAD(pages_to_free);
/*
* Put back any unfreeable pages.
*/
while (!list_empty(page_list)) {
struct page *page = lru_to_page(page_list);
int lru;
VM_BUG_ON_PAGE(PageLRU(page), page);
list_del(&page->lru);
if (unlikely(!page_evictable(page))) {
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_unlock_irq(&pgdat->lru_lock);
putback_lru_page(page);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_lock_irq(&pgdat->lru_lock);
continue;
}
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
lruvec = mem_cgroup_page_lruvec(page, pgdat);
SetPageLRU(page);
lru = page_lru(page);
add_page_to_lru_list(page, lruvec, lru);
if (is_active_lru(lru)) {
int file = is_file_lru(lru);
int numpages = hpage_nr_pages(page);
reclaim_stat->recent_rotated[file] += numpages;
}
mm: take pagevecs off reclaim stack Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru() by lists of pages_to_free: then apply Konstantin Khlebnikov's free_hot_cold_page_list() to them instead of pagevec_release(). Which simplifies the flow (no need to drop and retake lock whenever pagevec fills up) and reduces stale addresses in stack backtraces (which often showed through the pagevecs); but more importantly, removes another 120 bytes from the deepest stacks in page reclaim. Although I've not recently seen an actual stack overflow here with a vanilla kernel, move_active_pages_to_lru() has often featured in deep backtraces. However, free_hot_cold_page_list() does not handle compound pages (nor need it: a Transparent HugePage would have been split by the time it reaches the call in shrink_page_list()), but it is possible for putback_lru_pages() or move_active_pages_to_lru() to be left holding the last reference on a THP, so must exclude the unlikely compound case before putting on pages_to_free. Remove pagevec_strip(), its work now done in move_active_pages_to_lru(). The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c, but that is never on the reclaim path, and cannot be replaced by a list. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:56 +07:00
if (put_page_testzero(page)) {
__ClearPageLRU(page);
__ClearPageActive(page);
del_page_from_lru_list(page, lruvec, lru);
mm: take pagevecs off reclaim stack Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru() by lists of pages_to_free: then apply Konstantin Khlebnikov's free_hot_cold_page_list() to them instead of pagevec_release(). Which simplifies the flow (no need to drop and retake lock whenever pagevec fills up) and reduces stale addresses in stack backtraces (which often showed through the pagevecs); but more importantly, removes another 120 bytes from the deepest stacks in page reclaim. Although I've not recently seen an actual stack overflow here with a vanilla kernel, move_active_pages_to_lru() has often featured in deep backtraces. However, free_hot_cold_page_list() does not handle compound pages (nor need it: a Transparent HugePage would have been split by the time it reaches the call in shrink_page_list()), but it is possible for putback_lru_pages() or move_active_pages_to_lru() to be left holding the last reference on a THP, so must exclude the unlikely compound case before putting on pages_to_free. Remove pagevec_strip(), its work now done in move_active_pages_to_lru(). The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c, but that is never on the reclaim path, and cannot be replaced by a list. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:56 +07:00
if (unlikely(PageCompound(page))) {
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_unlock_irq(&pgdat->lru_lock);
mem_cgroup_uncharge(page);
mm: take pagevecs off reclaim stack Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru() by lists of pages_to_free: then apply Konstantin Khlebnikov's free_hot_cold_page_list() to them instead of pagevec_release(). Which simplifies the flow (no need to drop and retake lock whenever pagevec fills up) and reduces stale addresses in stack backtraces (which often showed through the pagevecs); but more importantly, removes another 120 bytes from the deepest stacks in page reclaim. Although I've not recently seen an actual stack overflow here with a vanilla kernel, move_active_pages_to_lru() has often featured in deep backtraces. However, free_hot_cold_page_list() does not handle compound pages (nor need it: a Transparent HugePage would have been split by the time it reaches the call in shrink_page_list()), but it is possible for putback_lru_pages() or move_active_pages_to_lru() to be left holding the last reference on a THP, so must exclude the unlikely compound case before putting on pages_to_free. Remove pagevec_strip(), its work now done in move_active_pages_to_lru(). The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c, but that is never on the reclaim path, and cannot be replaced by a list. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:56 +07:00
(*get_compound_page_dtor(page))(page);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_lock_irq(&pgdat->lru_lock);
mm: take pagevecs off reclaim stack Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru() by lists of pages_to_free: then apply Konstantin Khlebnikov's free_hot_cold_page_list() to them instead of pagevec_release(). Which simplifies the flow (no need to drop and retake lock whenever pagevec fills up) and reduces stale addresses in stack backtraces (which often showed through the pagevecs); but more importantly, removes another 120 bytes from the deepest stacks in page reclaim. Although I've not recently seen an actual stack overflow here with a vanilla kernel, move_active_pages_to_lru() has often featured in deep backtraces. However, free_hot_cold_page_list() does not handle compound pages (nor need it: a Transparent HugePage would have been split by the time it reaches the call in shrink_page_list()), but it is possible for putback_lru_pages() or move_active_pages_to_lru() to be left holding the last reference on a THP, so must exclude the unlikely compound case before putting on pages_to_free. Remove pagevec_strip(), its work now done in move_active_pages_to_lru(). The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c, but that is never on the reclaim path, and cannot be replaced by a list. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:56 +07:00
} else
list_add(&page->lru, &pages_to_free);
}
}
/*
* To save our caller's stack, now use input list for pages to free.
*/
list_splice(&pages_to_free, page_list);
}
/*
* If a kernel thread (such as nfsd for loop-back mounts) services
* a backing device by writing to the page cache it sets PF_LESS_THROTTLE.
* In that case we should only throttle if the backing device it is
* writing to is congested. In other cases it is safe to throttle.
*/
static int current_may_throttle(void)
{
return !(current->flags & PF_LESS_THROTTLE) ||
current->backing_dev_info == NULL ||
bdi_write_congested(current->backing_dev_info);
}
static bool inactive_reclaimable_pages(struct lruvec *lruvec,
struct scan_control *sc, enum lru_list lru)
{
int zid;
struct zone *zone;
int file = is_file_lru(lru);
struct pglist_data *pgdat = lruvec_pgdat(lruvec);
if (!global_reclaim(sc))
return true;
for (zid = sc->reclaim_idx; zid >= 0; zid--) {
zone = &pgdat->node_zones[zid];
if (!populated_zone(zone))
continue;
if (zone_page_state_snapshot(zone, NR_ZONE_LRU_BASE +
LRU_FILE * file) >= SWAP_CLUSTER_MAX)
return true;
}
return false;
}
/*
* shrink_inactive_list() is a helper for shrink_node(). It returns the number
* of reclaimed pages
*/
static noinline_for_stack unsigned long
shrink_inactive_list(unsigned long nr_to_scan, struct lruvec *lruvec,
struct scan_control *sc, enum lru_list lru)
{
LIST_HEAD(page_list);
unsigned long nr_scanned;
unsigned long nr_reclaimed = 0;
unsigned long nr_taken;
unsigned long nr_dirty = 0;
unsigned long nr_congested = 0;
mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered Further testing of the "Reduce system disruption due to kswapd" discovered a few problems. First and foremost, it's possible for pages under writeback to be freed which will lead to badness. Second, as pages were not being swapped the file LRU was being scanned faster and clean file pages were being reclaimed. In some cases this results in increased read IO to re-read data from disk. Third, more pages were being written from kswapd context which can adversly affect IO performance. Lastly, it was observed that PageDirty pages are not necessarily dirty on all filesystems (buffers can be clean while PageDirty is set and ->writepage generates no IO) and not all filesystems set PageWriteback when the page is being written (e.g. ext3). This disconnect confuses the reclaim stalling logic. This follow-up series is aimed at these problems. The tests were based on three kernels vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to kswapd" applied on top as per what should be in Andrew's tree right now lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel The first test used memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service. It starts with no background IO on a freshly created ext4 filesystem and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%) Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%) Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%) Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%) Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%) Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%) Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%) Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%) Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%) Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%) Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%) Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%) Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%) memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 23K/sec to just over 4K/second when there is 2385M of IO going on in the background. With current mmotm, there is no collapse in performance and with this follow-up series there is little change. swaptotal is the total amount of swap traffic. With mmotm and the follow-up series, the total amount of swapping is much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 11160152 10706748 10622316 Major Faults 46305 755 678 Swap Ins 260249 0 0 Swap Outs 683860 18 18 Direct pages scanned 0 678 2520 Kswapd pages scanned 6046108 8814900 1639279 Kswapd pages reclaimed 1081954 1172267 1094635 Direct pages reclaimed 0 566 2304 Kswapd efficiency 17% 13% 66% Kswapd velocity 5217.560 7618.953 1414.879 Direct efficiency 100% 83% 91% Direct velocity 0.000 0.586 2.175 Percentage direct scans 0% 0% 0% Zone normal velocity 5105.086 6824.681 671.158 Zone dma32 velocity 112.473 794.858 745.896 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 1929612.000 6861768.000 32821.000 Page writes file 1245752 6861750 32803 Page writes anon 683860 18 18 Page reclaim immediate 7484 40 239 Sector Reads 1130320 93996 86900 Sector Writes 13508052 10823500 11804436 Page rescued immediate 0 0 0 Slabs scanned 33536 27136 18560 Direct inode steals 0 0 0 Kswapd inode steals 8641 1035 0 Kswapd skipped wait 0 0 0 THP fault alloc 8 37 33 THP collapse alloc 508 552 515 THP splits 24 1 1 THP fault fallback 0 0 0 THP collapse fail 0 0 0 There are a number of observations to make here 1. Swap outs are almost eliminated. Swap ins are 0 indicating that the pages swapped were really unused anonymous pages. Related to that, major faults are much reduced. 2. kswapd efficiency was impacted by the initial series but with these follow-up patches, the efficiency is now at 66% indicating that far fewer pages were skipped during scanning due to dirty or writeback pages. 3. kswapd velocity is reduced indicating that fewer pages are being scanned with the follow-up series as kswapd now stalls when the tail of the LRU queue is full of unqueued dirty pages. The stall gives flushers a chance to catch-up so kswapd can reclaim clean pages when it wakes 4. In light of Zlatko's recent reports about zone scanning imbalances, mmtests now reports scanning velocity on a per-zone basis. With mainline, you can see that the scanning activity is dominated by the Normal zone with over 45 times more scanning in Normal than the DMA32 zone. With the series currently in mmotm, the ratio is slightly better but it is still the case that the bulk of scanning is in the highest zone. With this follow-up series, the ratio of scanning between the Normal and DMA32 zone is roughly equal. 5. As Dave Chinner observed, the current patches in mmotm increased the number of pages written from kswapd context which is expected to adversly impact IO performance. With the follow-up patches, far fewer pages are written from kswapd context than the mainline kernel 6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With the follow-up series, there is less slab shrinking activity and no inodes were reclaimed. 7. Note that "Sectors Read" is drastically reduced implying that the source data being used for the IO is not being aggressively discarded due to page reclaim skipping over dirty pages and reclaiming clean pages. Note that the reducion in reads could also be due to inode data not being re-read from disk after a slab shrink. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 166.99 32.09 33.44 Mean sda-await 853.64 192.76 185.43 Mean sda-r_await 6.31 9.24 5.97 Mean sda-w_await 2992.81 202.65 192.43 Max sda-avgqz 1409.91 718.75 698.98 Max sda-await 6665.74 3538.00 3124.23 Max sda-r_await 58.96 111.95 58.00 Max sda-w_await 28458.94 3977.29 3148.61 In light of the changes in writes from reclaim context, the number of reads and Dave Chinner's concerns about IO performance I took a closer look at the IO stats for the test disk. Few observations 1. The average queue size is reduced by the initial series and roughly the same with this follow up. 2. Average wait times for writes are reduced and as the IO is completing faster it at least implies that the gain is because flushers are writing the files efficiently instead of page reclaim getting in the way. 3. The reduction in maximum write latency is staggering. 28 seconds down to 3 seconds. Jan Kara asked how NFS is affected by all of this. Unstable pages can be taken into account as one of the patches in the series shows but it is still the case that filesystems with unusual handling of dirty or writeback could still be treated better. Tests like postmark, fsmark and largedd showed up nothing useful. On my test setup, pages are simply not being written back from reclaim context with or without the patches and there are no changes in performance. My test setup probably is just not strong enough network-wise to be really interesting. I ran a longer-lived memcached test with IO going to NFS instead of a local disk parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%) Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%) Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%) Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%) Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%) Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%) Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%) Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%) Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%) Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%) Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%) Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%) Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%) Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%) Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%) Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%) Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%) Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%) 1. Performance does not collapse due to IO which is good. IO is also completing faster. Note with mmotm, IO completes in a third of the time and faster again with this series applied 2. Swapping is reduced, although not eliminated. The figures for the follow-up look bad but it does vary a bit as the stalling is not perfect for nfs or filesystems like ext3 with unusual handling of dirty and writeback pages 3. There are swapins, particularly with larger amounts of IO indicating that active pages are being reclaimed. However, the number of much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 36339175 35025445 35219699 Major Faults 310964 27108 51887 Swap Ins 2176399 173069 333316 Swap Outs 3344050 357228 504824 Direct pages scanned 8972 77283 43242 Kswapd pages scanned 20899983 8939566 14772851 Kswapd pages reclaimed 6193156 5172605 5231026 Direct pages reclaimed 8450 73802 39514 Kswapd efficiency 29% 57% 35% Kswapd velocity 3929.743 1847.499 3058.840 Direct efficiency 94% 95% 91% Direct velocity 1.687 15.972 8.954 Percentage direct scans 0% 0% 0% Zone normal velocity 3721.907 939.103 2185.142 Zone dma32 velocity 209.522 924.368 882.651 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 4082185.000 526319.000 537114.000 Page writes file 738135 169091 32290 Page writes anon 3344050 357228 504824 Page reclaim immediate 9524 170 5595843 Sector Reads 8909900 861192 1483680 Sector Writes 13428980 1488744 2076800 Page rescued immediate 0 0 0 Slabs scanned 38016 31744 28672 Direct inode steals 0 0 0 Kswapd inode steals 424 0 0 Kswapd skipped wait 0 0 0 THP fault alloc 14 15 119 THP collapse alloc 1767 1569 1618 THP splits 30 29 25 THP fault fallback 0 0 0 THP collapse fail 8 5 0 Compaction stalls 17 41 100 Compaction success 7 31 95 Compaction failures 10 10 5 Page migrate success 7083 22157 62217 Page migrate failure 0 0 0 Compaction pages isolated 14847 48758 135830 Compaction migrate scanned 18328 48398 138929 Compaction free scanned 2000255 355827 1720269 Compaction cost 7 24 68 I guess the main takeaway again is the much reduced page writes from reclaim context and reduced reads. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 23.58 0.35 0.44 Mean sda-await 133.47 15.72 15.46 Mean sda-r_await 4.72 4.69 3.95 Mean sda-w_await 507.69 28.40 33.68 Max sda-avgqz 680.60 12.25 23.14 Max sda-await 3958.89 221.83 286.22 Max sda-r_await 63.86 61.23 67.29 Max sda-w_await 11710.38 883.57 1767.28 And as before, write wait times are much reduced. This patch: The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority" decides whether to writeback pages from reclaim context based on the number of dirty pages encountered. This situation is flagged too easily and flushers are not given the chance to catch up resulting in more pages being written from reclaim context and potentially impacting IO performance. The check for PageWriteback is also misplaced as it happens within a PageDirty check which is nonsense as the dirty may have been cleared for IO. The accounting is updated very late and pages that are already under writeback, were reactivated, could not unmapped or could not be released are all missed. Similarly, a page is considered congested for reasons other than being congested and pages that cannot be written out in the correct context are skipped. Finally, it considers stalling and writing back filesystem pages due to encountering dirty anonymous pages at the tail of the LRU which is dumb. This patch causes kswapd to begin writing filesystem pages from reclaim context only if page reclaim found that all filesystem pages at the tail of the LRU were unqueued dirty pages. Before it starts writing filesystem pages, it will stall to give flushers a chance to catch up. The decision on whether wait_iff_congested is also now determined by dirty filesystem pages only. Congested pages are based on whether the underlying BDI is congested regardless of the context of the reclaiming process. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:57 +07:00
unsigned long nr_unqueued_dirty = 0;
mm: vmscan: throttle reclaim if encountering too many dirty pages under writeback Workloads that are allocating frequently and writing files place a large number of dirty pages on the LRU. With use-once logic, it is possible for them to reach the end of the LRU quickly requiring the reclaimer to scan more to find clean pages. Ordinarily, processes that are dirtying memory will get throttled by dirty balancing but this is a global heuristic and does not take into account that LRUs are maintained on a per-zone basis. This can lead to a situation whereby reclaim is scanning heavily, skipping over a large number of pages under writeback and recycling them around the LRU consuming CPU. This patch checks how many of the number of pages isolated from the LRU were dirty and under writeback. If a percentage of them under writeback, the process will be throttled if a backing device or the zone is congested. Note that this applies whether it is anonymous or file-backed pages that are under writeback meaning that swapping is potentially throttled. This is intentional due to the fact if the swap device is congested, scanning more pages and dispatching more IO is not going to help matters. The percentage that must be in writeback depends on the priority. At default priority, all of them must be dirty. At DEF_PRIORITY-1, 50% of them must be, DEF_PRIORITY-2, 25% etc. i.e. as pressure increases the greater the likelihood the process will get throttled to allow the flusher threads to make some progress. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 07:07:56 +07:00
unsigned long nr_writeback = 0;
unsigned long nr_immediate = 0;
isolate_mode_t isolate_mode = 0;
int file = is_file_lru(lru);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
struct pglist_data *pgdat = lruvec_pgdat(lruvec);
struct zone_reclaim_stat *reclaim_stat = &lruvec->reclaim_stat;
vmscan: low order lumpy reclaim also should use PAGEOUT_IO_SYNC Commit 33c120ed2843090e2bd316de1588b8bf8b96cbde ("more aggressively use lumpy reclaim") increased how aggressive lumpy reclaim was by isolating both active and inactive pages for asynchronous lumpy reclaim on costly-high-order pages and for cheap-high-order when memory pressure is high. However, if the system is under heavy pressure and there are dirty pages, asynchronous IO may not be sufficient to reclaim a suitable page in time. This patch causes the caller to enter synchronous lumpy reclaim for costly-high-order pages and for cheap-high-order pages when under memory pressure. Minchan.kim@gmail.com said: Andy added synchronous lumpy reclaim with c661b078fd62abe06fd11fab4ac5e4eeafe26b6d. At that time, lumpy reclaim is not agressive. His intension is just for high-order users.(above PAGE_ALLOC_COSTLY_ORDER). After some time, Rik added aggressive lumpy reclaim with 33c120ed2843090e2bd316de1588b8bf8b96cbde. His intention was to do lumpy reclaim when high-order users and trouble getting a small set of contiguous pages. So we also have to add synchronous pageout for small set of contiguous pages. Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <Minchan.kim@gmail.com> Reviewed-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:31:40 +07:00
if (!inactive_reclaimable_pages(lruvec, sc, lru))
return 0;
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
while (unlikely(too_many_isolated(pgdat, file, sc))) {
congestion_wait(BLK_RW_ASYNC, HZ/10);
/* We are about to die and free our memory. Return now. */
if (fatal_signal_pending(current))
return SWAP_CLUSTER_MAX;
}
lru_add_drain();
if (!sc->may_unmap)
isolate_mode |= ISOLATE_UNMAPPED;
if (!sc->may_writepage)
isolate_mode |= ISOLATE_CLEAN;
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_lock_irq(&pgdat->lru_lock);
nr_taken = isolate_lru_pages(nr_to_scan, lruvec, &page_list,
&nr_scanned, sc, isolate_mode, lru);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
__mod_node_page_state(pgdat, NR_ISOLATED_ANON + file, nr_taken);
mm: update_lru_size do the __mod_zone_page_state Konstantin Khlebnikov pointed out (nearly four years ago, when lumpy reclaim was removed) that lru_size can be updated by -nr_taken once per call to isolate_lru_pages(), instead of page by page. Update it inside isolate_lru_pages(), or at its two callsites? I chose to update it at the callsites, rearranging and grouping the updates by nr_taken and nr_scanned together in both. With one exception, mem_cgroup_update_lru_size(,lru,) is then used where __mod_zone_page_state(,NR_LRU_BASE+lru,) is used; and we shall be adding some more calls in a future commit. Make the code a little smaller and simpler by incorporating stat update in lru_size update. The exception was move_active_pages_to_lru(), which aggregated the pgmoved stat update separately from the individual lru_size updates; but I still think this a simplification worth making. However, the __mod_zone_page_state is not peculiar to mem_cgroups: so better use the name update_lru_size, calls mem_cgroup_update_lru_size when CONFIG_MEMCG. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:38 +07:00
reclaim_stat->recent_scanned[file] += nr_taken;
if (global_reclaim(sc)) {
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
__mod_node_page_state(pgdat, NR_PAGES_SCANNED, nr_scanned);
if (current_is_kswapd())
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
__count_vm_events(PGSCAN_KSWAPD, nr_scanned);
else
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
__count_vm_events(PGSCAN_DIRECT, nr_scanned);
}
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_unlock_irq(&pgdat->lru_lock);
if (nr_taken == 0)
return 0;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 18:03:16 +07:00
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
nr_reclaimed = shrink_page_list(&page_list, pgdat, sc, TTU_UNMAP,
&nr_dirty, &nr_unqueued_dirty, &nr_congested,
&nr_writeback, &nr_immediate,
false);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_lock_irq(&pgdat->lru_lock);
if (global_reclaim(sc)) {
if (current_is_kswapd())
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
__count_vm_events(PGSTEAL_KSWAPD, nr_reclaimed);
else
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
__count_vm_events(PGSTEAL_DIRECT, nr_reclaimed);
}
putback_inactive_pages(lruvec, &page_list);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
__mod_node_page_state(pgdat, NR_ISOLATED_ANON + file, -nr_taken);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_unlock_irq(&pgdat->lru_lock);
mem_cgroup_uncharge_list(&page_list);
free_hot_cold_page_list(&page_list, true);
tracing, vmscan: add trace events for LRU list shrinking There have been numerous reports of stalls that pointed at the problem being somewhere in the VM. There are multiple roots to the problems which means dealing with any of the root problems in isolation is tricky to justify on their own and they would still need integration testing. This patch series puts together two different patch sets which in combination should tackle some of the root causes of latency problems being reported. Patch 1 adds a tracepoint for shrink_inactive_list. For this series, the most important results is being able to calculate the scanning/reclaim ratio as a measure of the amount of work being done by page reclaim. Patch 2 accounts for time spent in congestion_wait. Patches 3-6 were originally developed by Kosaki Motohiro but reworked for this series. It has been noted that lumpy reclaim is far too aggressive and trashes the system somewhat. As SLUB uses high-order allocations, a large cost incurred by lumpy reclaim will be noticeable. It was also reported during transparent hugepage support testing that lumpy reclaim was trashing the system and these patches should mitigate that problem without disabling lumpy reclaim. Patch 7 adds wait_iff_congested() and replaces some callers of congestion_wait(). wait_iff_congested() only sleeps if there is a BDI that is currently congested. Patch 8 notes that any BDI being congested is not necessarily a problem because there could be multiple BDIs of varying speeds and numberous zones. It attempts to track when a zone being reclaimed contains many pages backed by a congested BDI and if so, reclaimers wait on the congestion queue. I ran a number of tests with monitoring on X86, X86-64 and PPC64. Each machine had 3G of RAM and the CPUs were X86: Intel P4 2-core X86-64: AMD Phenom 4-core PPC64: PPC970MP Each used a single disk and the onboard IO controller. Dirty ratio was left at 20. I'm just going to report for X86-64 and PPC64 in a vague attempt to keep this report short. Four kernels were tested each based on v2.6.36-rc4 traceonly-v2r2: Patches 1 and 2 to instrument vmscan reclaims and congestion_wait lowlumpy-v2r3: Patches 1-6 to test if lumpy reclaim is better waitcongest-v2r3: Patches 1-7 to only wait on congestion waitwriteback-v2r4: Patches 1-8 to detect when a zone is congested nocongest-v1r5: Patches 1-3 for testing wait_iff_congestion nodirect-v1r5: Patches 1-10 to disable filesystem writeback for better IO The tests run were as follows kernbench compile-based benchmark. Smoke test performance sysbench OLTP read-only benchmark. Will be re-run in the future as read-write micro-mapped-file-stream This is a micro-benchmark from Johannes Weiner that accesses a large sparse-file through mmap(). It was configured to run in only single-CPU mode but can be indicative of how well page reclaim identifies suitable pages. stress-highalloc Tries to allocate huge pages under heavy load. kernbench, iozone and sysbench did not report any performance regression on any machine. sysbench did pressure the system lightly and there was reclaim activity but there were no difference of major interest between the kernels. X86-64 micro-mapped-file-stream traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3 waitwriteback-v2r4 pgalloc_dma 1639.00 ( 0.00%) 667.00 (-145.73%) 1167.00 ( -40.45%) 578.00 (-183.56%) pgalloc_dma32 2842410.00 ( 0.00%) 2842626.00 ( 0.01%) 2843043.00 ( 0.02%) 2843014.00 ( 0.02%) pgalloc_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) pgsteal_dma 729.00 ( 0.00%) 85.00 (-757.65%) 609.00 ( -19.70%) 125.00 (-483.20%) pgsteal_dma32 2338721.00 ( 0.00%) 2447354.00 ( 4.44%) 2429536.00 ( 3.74%) 2436772.00 ( 4.02%) pgsteal_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) pgscan_kswapd_dma 1469.00 ( 0.00%) 532.00 (-176.13%) 1078.00 ( -36.27%) 220.00 (-567.73%) pgscan_kswapd_dma32 4597713.00 ( 0.00%) 4503597.00 ( -2.09%) 4295673.00 ( -7.03%) 3891686.00 ( -18.14%) pgscan_kswapd_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) pgscan_direct_dma 71.00 ( 0.00%) 134.00 ( 47.01%) 243.00 ( 70.78%) 352.00 ( 79.83%) pgscan_direct_dma32 305820.00 ( 0.00%) 280204.00 ( -9.14%) 600518.00 ( 49.07%) 957485.00 ( 68.06%) pgscan_direct_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) pageoutrun 16296.00 ( 0.00%) 21254.00 ( 23.33%) 18447.00 ( 11.66%) 20067.00 ( 18.79%) allocstall 443.00 ( 0.00%) 273.00 ( -62.27%) 513.00 ( 13.65%) 1568.00 ( 71.75%) These are based on the raw figures taken from /proc/vmstat. It's a rough measure of reclaim activity. Note that allocstall counts are higher because we are entering direct reclaim more often as a result of not sleeping in congestion. In itself, it's not necessarily a bad thing. It's easier to get a view of what happened from the vmscan tracepoint report. FTrace Reclaim Statistics: vmscan traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3 waitwriteback-v2r4 Direct reclaims 443 273 513 1568 Direct reclaim pages scanned 305968 280402 600825 957933 Direct reclaim pages reclaimed 43503 19005 30327 117191 Direct reclaim write file async I/O 0 0 0 0 Direct reclaim write anon async I/O 0 3 4 12 Direct reclaim write file sync I/O 0 0 0 0 Direct reclaim write anon sync I/O 0 0 0 0 Wake kswapd requests 187649 132338 191695 267701 Kswapd wakeups 3 1 4 1 Kswapd pages scanned 4599269 4454162 4296815 3891906 Kswapd pages reclaimed 2295947 2428434 2399818 2319706 Kswapd reclaim write file async I/O 1 0 1 1 Kswapd reclaim write anon async I/O 59 187 41 222 Kswapd reclaim write file sync I/O 0 0 0 0 Kswapd reclaim write anon sync I/O 0 0 0 0 Time stalled direct reclaim (seconds) 4.34 2.52 6.63 2.96 Time kswapd awake (seconds) 11.15 10.25 11.01 10.19 Total pages scanned 4905237 4734564 4897640 4849839 Total pages reclaimed 2339450 2447439 2430145 2436897 %age total pages scanned/reclaimed 47.69% 51.69% 49.62% 50.25% %age total pages scanned/written 0.00% 0.00% 0.00% 0.00% %age file pages scanned/written 0.00% 0.00% 0.00% 0.00% Percentage Time Spent Direct Reclaim 29.23% 19.02% 38.48% 20.25% Percentage Time kswapd Awake 78.58% 78.85% 76.83% 79.86% What is interesting here for nocongest in particular is that while direct reclaim scans more pages, the overall number of pages scanned remains the same and the ratio of pages scanned to pages reclaimed is more or less the same. In other words, while we are sleeping less, reclaim is not doing more work and as direct reclaim and kswapd is awake for less time, it would appear to be doing less work. FTrace Reclaim Statistics: congestion_wait Direct number congest waited 87 196 64 0 Direct time congest waited 4604ms 4732ms 5420ms 0ms Direct full congest waited 72 145 53 0 Direct number conditional waited 0 0 324 1315 Direct time conditional waited 0ms 0ms 0ms 0ms Direct full conditional waited 0 0 0 0 KSwapd number congest waited 20 10 15 7 KSwapd time congest waited 1264ms 536ms 884ms 284ms KSwapd full congest waited 10 4 6 2 KSwapd number conditional waited 0 0 0 0 KSwapd time conditional waited 0ms 0ms 0ms 0ms KSwapd full conditional waited 0 0 0 0 The vanilla kernel spent 8 seconds asleep in direct reclaim and no time at all asleep with the patches. MMTests Statistics: duration User/Sys Time Running Test (seconds) 10.51 10.73 10.6 11.66 Total Elapsed Time (seconds) 14.19 13.00 14.33 12.76 Overall, the tests completed faster. It is interesting to note that backing off further when a zone is congested and not just a BDI was more efficient overall. PPC64 micro-mapped-file-stream pgalloc_dma 3024660.00 ( 0.00%) 3027185.00 ( 0.08%) 3025845.00 ( 0.04%) 3026281.00 ( 0.05%) pgalloc_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) pgsteal_dma 2508073.00 ( 0.00%) 2565351.00 ( 2.23%) 2463577.00 ( -1.81%) 2532263.00 ( 0.96%) pgsteal_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) pgscan_kswapd_dma 4601307.00 ( 0.00%) 4128076.00 ( -11.46%) 3912317.00 ( -17.61%) 3377165.00 ( -36.25%) pgscan_kswapd_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) pgscan_direct_dma 629825.00 ( 0.00%) 971622.00 ( 35.18%) 1063938.00 ( 40.80%) 1711935.00 ( 63.21%) pgscan_direct_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) pageoutrun 27776.00 ( 0.00%) 20458.00 ( -35.77%) 18763.00 ( -48.04%) 18157.00 ( -52.98%) allocstall 977.00 ( 0.00%) 2751.00 ( 64.49%) 2098.00 ( 53.43%) 5136.00 ( 80.98%) Similar trends to x86-64. allocstalls are up but it's not necessarily bad. FTrace Reclaim Statistics: vmscan Direct reclaims 977 2709 2098 5136 Direct reclaim pages scanned 629825 963814 1063938 1711935 Direct reclaim pages reclaimed 75550 242538 150904 387647 Direct reclaim write file async I/O 0 0 0 2 Direct reclaim write anon async I/O 0 10 0 4 Direct reclaim write file sync I/O 0 0 0 0 Direct reclaim write anon sync I/O 0 0 0 0 Wake kswapd requests 392119 1201712 571935 571921 Kswapd wakeups 3 2 3 3 Kswapd pages scanned 4601307 4128076 3912317 3377165 Kswapd pages reclaimed 2432523 2318797 2312673 2144616 Kswapd reclaim write file async I/O 20 1 1 1 Kswapd reclaim write anon async I/O 57 132 11 121 Kswapd reclaim write file sync I/O 0 0 0 0 Kswapd reclaim write anon sync I/O 0 0 0 0 Time stalled direct reclaim (seconds) 6.19 7.30 13.04 10.88 Time kswapd awake (seconds) 21.73 26.51 25.55 23.90 Total pages scanned 5231132 5091890 4976255 5089100 Total pages reclaimed 2508073 2561335 2463577 2532263 %age total pages scanned/reclaimed 47.95% 50.30% 49.51% 49.76% %age total pages scanned/written 0.00% 0.00% 0.00% 0.00% %age file pages scanned/written 0.00% 0.00% 0.00% 0.00% Percentage Time Spent Direct Reclaim 18.89% 20.65% 32.65% 27.65% Percentage Time kswapd Awake 72.39% 80.68% 78.21% 77.40% Again, a similar trend that the congestion_wait changes mean that direct reclaim scans more pages but the overall number of pages scanned while slightly reduced, are very similar. The ratio of scanning/reclaimed remains roughly similar. The downside is that kswapd and direct reclaim was awake longer and for a larger percentage of the overall workload. It's possible there were big differences in the amount of time spent reclaiming slab pages between the different kernels which is plausible considering that the micro tests runs after fsmark and sysbench. Trace Reclaim Statistics: congestion_wait Direct number congest waited 845 1312 104 0 Direct time congest waited 19416ms 26560ms 7544ms 0ms Direct full congest waited 745 1105 72 0 Direct number conditional waited 0 0 1322 2935 Direct time conditional waited 0ms 0ms 12ms 312ms Direct full conditional waited 0 0 0 3 KSwapd number congest waited 39 102 75 63 KSwapd time congest waited 2484ms 6760ms 5756ms 3716ms KSwapd full congest waited 20 48 46 25 KSwapd number conditional waited 0 0 0 0 KSwapd time conditional waited 0ms 0ms 0ms 0ms KSwapd full conditional waited 0 0 0 0 The vanilla kernel spent 20 seconds asleep in direct reclaim and only 312ms asleep with the patches. The time kswapd spent congest waited was also reduced by a large factor. MMTests Statistics: duration ser/Sys Time Running Test (seconds) 26.58 28.05 26.9 28.47 Total Elapsed Time (seconds) 30.02 32.86 32.67 30.88 With all patches applies, the completion times are very similar. X86-64 STRESS-HIGHALLOC traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3waitwriteback-v2r4 Pass 1 82.00 ( 0.00%) 84.00 ( 2.00%) 85.00 ( 3.00%) 85.00 ( 3.00%) Pass 2 90.00 ( 0.00%) 87.00 (-3.00%) 88.00 (-2.00%) 89.00 (-1.00%) At Rest 92.00 ( 0.00%) 90.00 (-2.00%) 90.00 (-2.00%) 91.00 (-1.00%) Success figures across the board are broadly similar. traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3waitwriteback-v2r4 Direct reclaims 1045 944 886 887 Direct reclaim pages scanned 135091 119604 109382 101019 Direct reclaim pages reclaimed 88599 47535 47863 46671 Direct reclaim write file async I/O 494 283 465 280 Direct reclaim write anon async I/O 29357 13710 16656 13462 Direct reclaim write file sync I/O 154 2 2 3 Direct reclaim write anon sync I/O 14594 571 509 561 Wake kswapd requests 7491 933 872 892 Kswapd wakeups 814 778 731 780 Kswapd pages scanned 7290822 15341158 11916436 13703442 Kswapd pages reclaimed 3587336 3142496 3094392 3187151 Kswapd reclaim write file async I/O 91975 32317 28022 29628 Kswapd reclaim write anon async I/O 1992022 789307 829745 849769 Kswapd reclaim write file sync I/O 0 0 0 0 Kswapd reclaim write anon sync I/O 0 0 0 0 Time stalled direct reclaim (seconds) 4588.93 2467.16 2495.41 2547.07 Time kswapd awake (seconds) 2497.66 1020.16 1098.06 1176.82 Total pages scanned 7425913 15460762 12025818 13804461 Total pages reclaimed 3675935 3190031 3142255 3233822 %age total pages scanned/reclaimed 49.50% 20.63% 26.13% 23.43% %age total pages scanned/written 28.66% 5.41% 7.28% 6.47% %age file pages scanned/written 1.25% 0.21% 0.24% 0.22% Percentage Time Spent Direct Reclaim 57.33% 42.15% 42.41% 42.99% Percentage Time kswapd Awake 43.56% 27.87% 29.76% 31.25% Scanned/reclaimed ratios again look good with big improvements in efficiency. The Scanned/written ratios also look much improved. With a better scanned/written ration, there is an expectation that IO would be more efficient and indeed, the time spent in direct reclaim is much reduced by the full series and kswapd spends a little less time awake. Overall, indications here are that allocations were happening much faster and this can be seen with a graph of the latency figures as the allocations were taking place http://www.csn.ul.ie/~mel/postings/vmscanreduce-20101509/highalloc-interlatency-hydra-mean.ps FTrace Reclaim Statistics: congestion_wait Direct number congest waited 1333 204 169 4 Direct time congest waited 78896ms 8288ms 7260ms 200ms Direct full congest waited 756 92 69 2 Direct number conditional waited 0 0 26 186 Direct time conditional waited 0ms 0ms 0ms 2504ms Direct full conditional waited 0 0 0 25 KSwapd number congest waited 4 395 227 282 KSwapd time congest waited 384ms 25136ms 10508ms 18380ms KSwapd full congest waited 3 232 98 176 KSwapd number conditional waited 0 0 0 0 KSwapd time conditional waited 0ms 0ms 0ms 0ms KSwapd full conditional waited 0 0 0 0 KSwapd full conditional waited 318 0 312 9 Overall, the time spent speeping is reduced. kswapd is still hitting congestion_wait() but that is because there are callers remaining where it wasn't clear in advance if they should be changed to wait_iff_congested() or not. Overall the sleep imes are reduced though - from 79ish seconds to about 19. MMTests Statistics: duration User/Sys Time Running Test (seconds) 3415.43 3386.65 3388.39 3377.5 Total Elapsed Time (seconds) 5733.48 3660.33 3689.41 3765.39 With the full series, the time to complete the tests are reduced by 30% PPC64 STRESS-HIGHALLOC traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3waitwriteback-v2r4 Pass 1 17.00 ( 0.00%) 34.00 (17.00%) 38.00 (21.00%) 43.00 (26.00%) Pass 2 25.00 ( 0.00%) 37.00 (12.00%) 42.00 (17.00%) 46.00 (21.00%) At Rest 49.00 ( 0.00%) 43.00 (-6.00%) 45.00 (-4.00%) 51.00 ( 2.00%) Success rates there are *way* up particularly considering that the 16MB huge pages on PPC64 mean that it's always much harder to allocate them. FTrace Reclaim Statistics: vmscan stress-highalloc stress-highalloc stress-highalloc stress-highalloc traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3waitwriteback-v2r4 Direct reclaims 499 505 564 509 Direct reclaim pages scanned 223478 41898 51818 45605 Direct reclaim pages reclaimed 137730 21148 27161 23455 Direct reclaim write file async I/O 399 136 162 136 Direct reclaim write anon async I/O 46977 2865 4686 3998 Direct reclaim write file sync I/O 29 0 1 3 Direct reclaim write anon sync I/O 31023 159 237 239 Wake kswapd requests 420 351 360 326 Kswapd wakeups 185 294 249 277 Kswapd pages scanned 15703488 16392500 17821724 17598737 Kswapd pages reclaimed 5808466 2908858 3139386 3145435 Kswapd reclaim write file async I/O 159938 18400 18717 13473 Kswapd reclaim write anon async I/O 3467554 228957 322799 234278 Kswapd reclaim write file sync I/O 0 0 0 0 Kswapd reclaim write anon sync I/O 0 0 0 0 Time stalled direct reclaim (seconds) 9665.35 1707.81 2374.32 1871.23 Time kswapd awake (seconds) 9401.21 1367.86 1951.75 1328.88 Total pages scanned 15926966 16434398 17873542 17644342 Total pages reclaimed 5946196 2930006 3166547 3168890 %age total pages scanned/reclaimed 37.33% 17.83% 17.72% 17.96% %age total pages scanned/written 23.27% 1.52% 1.94% 1.43% %age file pages scanned/written 1.01% 0.11% 0.11% 0.08% Percentage Time Spent Direct Reclaim 44.55% 35.10% 41.42% 36.91% Percentage Time kswapd Awake 86.71% 43.58% 52.67% 41.14% While the scanning rates are slightly up, the scanned/reclaimed and scanned/written figures are much improved. The time spent in direct reclaim and with kswapd are massively reduced, mostly by the lowlumpy patches. FTrace Reclaim Statistics: congestion_wait Direct number congest waited 725 303 126 3 Direct time congest waited 45524ms 9180ms 5936ms 300ms Direct full congest waited 487 190 52 3 Direct number conditional waited 0 0 200 301 Direct time conditional waited 0ms 0ms 0ms 1904ms Direct full conditional waited 0 0 0 19 KSwapd number congest waited 0 2 23 4 KSwapd time congest waited 0ms 200ms 420ms 404ms KSwapd full congest waited 0 2 2 4 KSwapd number conditional waited 0 0 0 0 KSwapd time conditional waited 0ms 0ms 0ms 0ms KSwapd full conditional waited 0 0 0 0 Not as dramatic a story here but the time spent asleep is reduced and we can still see what wait_iff_congested is going to sleep when necessary. MMTests Statistics: duration User/Sys Time Running Test (seconds) 12028.09 3157.17 3357.79 3199.16 Total Elapsed Time (seconds) 10842.07 3138.72 3705.54 3229.85 The time to complete this test goes way down. With the full series, we are allocating over twice the number of huge pages in 30% of the time and there is a corresponding impact on the allocation latency graph available at. http://www.csn.ul.ie/~mel/postings/vmscanreduce-20101509/highalloc-interlatency-powyah-mean.ps This patch: Add a trace event for shrink_inactive_list() and updates the sample postprocessing script appropriately. It can be used to determine how many pages were reclaimed and for non-lumpy reclaim where exactly the pages were reclaimed from. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 04:21:40 +07:00
mm: vmscan: throttle reclaim if encountering too many dirty pages under writeback Workloads that are allocating frequently and writing files place a large number of dirty pages on the LRU. With use-once logic, it is possible for them to reach the end of the LRU quickly requiring the reclaimer to scan more to find clean pages. Ordinarily, processes that are dirtying memory will get throttled by dirty balancing but this is a global heuristic and does not take into account that LRUs are maintained on a per-zone basis. This can lead to a situation whereby reclaim is scanning heavily, skipping over a large number of pages under writeback and recycling them around the LRU consuming CPU. This patch checks how many of the number of pages isolated from the LRU were dirty and under writeback. If a percentage of them under writeback, the process will be throttled if a backing device or the zone is congested. Note that this applies whether it is anonymous or file-backed pages that are under writeback meaning that swapping is potentially throttled. This is intentional due to the fact if the swap device is congested, scanning more pages and dispatching more IO is not going to help matters. The percentage that must be in writeback depends on the priority. At default priority, all of them must be dirty. At DEF_PRIORITY-1, 50% of them must be, DEF_PRIORITY-2, 25% etc. i.e. as pressure increases the greater the likelihood the process will get throttled to allow the flusher threads to make some progress. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 07:07:56 +07:00
/*
* If reclaim is isolating dirty pages under writeback, it implies
* that the long-lived page allocation rate is exceeding the page
* laundering rate. Either the global limits are not being effective
* at throttling processes due to the page distribution throughout
* zones or there is heavy usage of a slow backing device. The
* only option is to throttle from reclaim context which is not ideal
* as there is no guarantee the dirtying process is throttled in the
* same way balance_dirty_pages() manages.
*
* Once a zone is flagged ZONE_WRITEBACK, kswapd will count the number
* of pages under pages flagged for immediate reclaim and stall if any
* are encountered in the nr_immediate check below.
mm: vmscan: throttle reclaim if encountering too many dirty pages under writeback Workloads that are allocating frequently and writing files place a large number of dirty pages on the LRU. With use-once logic, it is possible for them to reach the end of the LRU quickly requiring the reclaimer to scan more to find clean pages. Ordinarily, processes that are dirtying memory will get throttled by dirty balancing but this is a global heuristic and does not take into account that LRUs are maintained on a per-zone basis. This can lead to a situation whereby reclaim is scanning heavily, skipping over a large number of pages under writeback and recycling them around the LRU consuming CPU. This patch checks how many of the number of pages isolated from the LRU were dirty and under writeback. If a percentage of them under writeback, the process will be throttled if a backing device or the zone is congested. Note that this applies whether it is anonymous or file-backed pages that are under writeback meaning that swapping is potentially throttled. This is intentional due to the fact if the swap device is congested, scanning more pages and dispatching more IO is not going to help matters. The percentage that must be in writeback depends on the priority. At default priority, all of them must be dirty. At DEF_PRIORITY-1, 50% of them must be, DEF_PRIORITY-2, 25% etc. i.e. as pressure increases the greater the likelihood the process will get throttled to allow the flusher threads to make some progress. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 07:07:56 +07:00
*/
if (nr_writeback && nr_writeback == nr_taken)
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
set_bit(PGDAT_WRITEBACK, &pgdat->flags);
mm: vmscan: throttle reclaim if encountering too many dirty pages under writeback Workloads that are allocating frequently and writing files place a large number of dirty pages on the LRU. With use-once logic, it is possible for them to reach the end of the LRU quickly requiring the reclaimer to scan more to find clean pages. Ordinarily, processes that are dirtying memory will get throttled by dirty balancing but this is a global heuristic and does not take into account that LRUs are maintained on a per-zone basis. This can lead to a situation whereby reclaim is scanning heavily, skipping over a large number of pages under writeback and recycling them around the LRU consuming CPU. This patch checks how many of the number of pages isolated from the LRU were dirty and under writeback. If a percentage of them under writeback, the process will be throttled if a backing device or the zone is congested. Note that this applies whether it is anonymous or file-backed pages that are under writeback meaning that swapping is potentially throttled. This is intentional due to the fact if the swap device is congested, scanning more pages and dispatching more IO is not going to help matters. The percentage that must be in writeback depends on the priority. At default priority, all of them must be dirty. At DEF_PRIORITY-1, 50% of them must be, DEF_PRIORITY-2, 25% etc. i.e. as pressure increases the greater the likelihood the process will get throttled to allow the flusher threads to make some progress. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 07:07:56 +07:00
/*
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use Because writeback wasn't cgroup aware before, the usual dirty throttling mechanism in balance_dirty_pages() didn't work for processes under memcg limit. The writeback path didn't know how much memory is available or how fast the dirty pages are being written out for a given memcg and balance_dirty_pages() didn't have any measure of IO back pressure for the memcg. To work around the issue, memcg implemented an ad-hoc dirty throttling mechanism in the direct reclaim path by stalling on pages under writeback which are encountered during direct reclaim scan. This is rather ugly and crude - none of the configurability, fairness, or bandwidth-proportional distribution of the normal path. The previous patches implemented proper memcg aware dirty throttling when cgroup writeback is in use making the ad-hoc mechanism unnecessary. This patch disables direct reclaim stalling for such case. Note: I disabled the parts which seemed obvious and it behaves fine while testing but my understanding of this code path is rudimentary and it's quite possible that I got something wrong. Please let me know if I got some wrong or more global_reclaim() sites should be updated. v2: The original patch removed the direct stalling mechanism which breaks legacy hierarchies. Conditionalize instead of removing. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:23:36 +07:00
* Legacy memcg will stall in page writeback so avoid forcibly
* stalling here.
*/
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use Because writeback wasn't cgroup aware before, the usual dirty throttling mechanism in balance_dirty_pages() didn't work for processes under memcg limit. The writeback path didn't know how much memory is available or how fast the dirty pages are being written out for a given memcg and balance_dirty_pages() didn't have any measure of IO back pressure for the memcg. To work around the issue, memcg implemented an ad-hoc dirty throttling mechanism in the direct reclaim path by stalling on pages under writeback which are encountered during direct reclaim scan. This is rather ugly and crude - none of the configurability, fairness, or bandwidth-proportional distribution of the normal path. The previous patches implemented proper memcg aware dirty throttling when cgroup writeback is in use making the ad-hoc mechanism unnecessary. This patch disables direct reclaim stalling for such case. Note: I disabled the parts which seemed obvious and it behaves fine while testing but my understanding of this code path is rudimentary and it's quite possible that I got something wrong. Please let me know if I got some wrong or more global_reclaim() sites should be updated. v2: The original patch removed the direct stalling mechanism which breaks legacy hierarchies. Conditionalize instead of removing. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:23:36 +07:00
if (sane_reclaim(sc)) {
/*
* Tag a zone as congested if all the dirty pages scanned were
* backed by a congested BDI and wait_iff_congested will stall.
*/
if (nr_dirty && nr_dirty == nr_congested)
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
set_bit(PGDAT_CONGESTED, &pgdat->flags);
/*
* If dirty pages are scanned that are not queued for IO, it
* implies that flushers are not keeping up. In this case, flag
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
* the pgdat PGDAT_DIRTY and kswapd will start writing pages from
* reclaim context.
*/
if (nr_unqueued_dirty == nr_taken)
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
set_bit(PGDAT_DIRTY, &pgdat->flags);
/*
* If kswapd scans pages marked marked for immediate
* reclaim and under writeback (nr_immediate), it implies
* that pages are cycling through the LRU faster than
* they are written so also forcibly stall.
*/
if (nr_immediate && current_may_throttle())
congestion_wait(BLK_RW_ASYNC, HZ/10);
mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered Further testing of the "Reduce system disruption due to kswapd" discovered a few problems. First and foremost, it's possible for pages under writeback to be freed which will lead to badness. Second, as pages were not being swapped the file LRU was being scanned faster and clean file pages were being reclaimed. In some cases this results in increased read IO to re-read data from disk. Third, more pages were being written from kswapd context which can adversly affect IO performance. Lastly, it was observed that PageDirty pages are not necessarily dirty on all filesystems (buffers can be clean while PageDirty is set and ->writepage generates no IO) and not all filesystems set PageWriteback when the page is being written (e.g. ext3). This disconnect confuses the reclaim stalling logic. This follow-up series is aimed at these problems. The tests were based on three kernels vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to kswapd" applied on top as per what should be in Andrew's tree right now lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel The first test used memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service. It starts with no background IO on a freshly created ext4 filesystem and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%) Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%) Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%) Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%) Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%) Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%) Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%) Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%) Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%) Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%) Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%) Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%) Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%) memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 23K/sec to just over 4K/second when there is 2385M of IO going on in the background. With current mmotm, there is no collapse in performance and with this follow-up series there is little change. swaptotal is the total amount of swap traffic. With mmotm and the follow-up series, the total amount of swapping is much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 11160152 10706748 10622316 Major Faults 46305 755 678 Swap Ins 260249 0 0 Swap Outs 683860 18 18 Direct pages scanned 0 678 2520 Kswapd pages scanned 6046108 8814900 1639279 Kswapd pages reclaimed 1081954 1172267 1094635 Direct pages reclaimed 0 566 2304 Kswapd efficiency 17% 13% 66% Kswapd velocity 5217.560 7618.953 1414.879 Direct efficiency 100% 83% 91% Direct velocity 0.000 0.586 2.175 Percentage direct scans 0% 0% 0% Zone normal velocity 5105.086 6824.681 671.158 Zone dma32 velocity 112.473 794.858 745.896 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 1929612.000 6861768.000 32821.000 Page writes file 1245752 6861750 32803 Page writes anon 683860 18 18 Page reclaim immediate 7484 40 239 Sector Reads 1130320 93996 86900 Sector Writes 13508052 10823500 11804436 Page rescued immediate 0 0 0 Slabs scanned 33536 27136 18560 Direct inode steals 0 0 0 Kswapd inode steals 8641 1035 0 Kswapd skipped wait 0 0 0 THP fault alloc 8 37 33 THP collapse alloc 508 552 515 THP splits 24 1 1 THP fault fallback 0 0 0 THP collapse fail 0 0 0 There are a number of observations to make here 1. Swap outs are almost eliminated. Swap ins are 0 indicating that the pages swapped were really unused anonymous pages. Related to that, major faults are much reduced. 2. kswapd efficiency was impacted by the initial series but with these follow-up patches, the efficiency is now at 66% indicating that far fewer pages were skipped during scanning due to dirty or writeback pages. 3. kswapd velocity is reduced indicating that fewer pages are being scanned with the follow-up series as kswapd now stalls when the tail of the LRU queue is full of unqueued dirty pages. The stall gives flushers a chance to catch-up so kswapd can reclaim clean pages when it wakes 4. In light of Zlatko's recent reports about zone scanning imbalances, mmtests now reports scanning velocity on a per-zone basis. With mainline, you can see that the scanning activity is dominated by the Normal zone with over 45 times more scanning in Normal than the DMA32 zone. With the series currently in mmotm, the ratio is slightly better but it is still the case that the bulk of scanning is in the highest zone. With this follow-up series, the ratio of scanning between the Normal and DMA32 zone is roughly equal. 5. As Dave Chinner observed, the current patches in mmotm increased the number of pages written from kswapd context which is expected to adversly impact IO performance. With the follow-up patches, far fewer pages are written from kswapd context than the mainline kernel 6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With the follow-up series, there is less slab shrinking activity and no inodes were reclaimed. 7. Note that "Sectors Read" is drastically reduced implying that the source data being used for the IO is not being aggressively discarded due to page reclaim skipping over dirty pages and reclaiming clean pages. Note that the reducion in reads could also be due to inode data not being re-read from disk after a slab shrink. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 166.99 32.09 33.44 Mean sda-await 853.64 192.76 185.43 Mean sda-r_await 6.31 9.24 5.97 Mean sda-w_await 2992.81 202.65 192.43 Max sda-avgqz 1409.91 718.75 698.98 Max sda-await 6665.74 3538.00 3124.23 Max sda-r_await 58.96 111.95 58.00 Max sda-w_await 28458.94 3977.29 3148.61 In light of the changes in writes from reclaim context, the number of reads and Dave Chinner's concerns about IO performance I took a closer look at the IO stats for the test disk. Few observations 1. The average queue size is reduced by the initial series and roughly the same with this follow up. 2. Average wait times for writes are reduced and as the IO is completing faster it at least implies that the gain is because flushers are writing the files efficiently instead of page reclaim getting in the way. 3. The reduction in maximum write latency is staggering. 28 seconds down to 3 seconds. Jan Kara asked how NFS is affected by all of this. Unstable pages can be taken into account as one of the patches in the series shows but it is still the case that filesystems with unusual handling of dirty or writeback could still be treated better. Tests like postmark, fsmark and largedd showed up nothing useful. On my test setup, pages are simply not being written back from reclaim context with or without the patches and there are no changes in performance. My test setup probably is just not strong enough network-wise to be really interesting. I ran a longer-lived memcached test with IO going to NFS instead of a local disk parallelio 3.9.0 3.9.0 3.9.0 vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10 Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%) Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%) Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%) Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%) Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%) Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%) Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%) Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%) Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%) Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%) Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%) Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%) Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%) Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%) Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%) Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%) Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%) Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%) 1. Performance does not collapse due to IO which is good. IO is also completing faster. Note with mmotm, IO completes in a third of the time and faster again with this series applied 2. Swapping is reduced, although not eliminated. The figures for the follow-up look bad but it does vary a bit as the stalling is not perfect for nfs or filesystems like ext3 with unusual handling of dirty and writeback pages 3. There are swapins, particularly with larger amounts of IO indicating that active pages are being reclaimed. However, the number of much reduced. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Minor Faults 36339175 35025445 35219699 Major Faults 310964 27108 51887 Swap Ins 2176399 173069 333316 Swap Outs 3344050 357228 504824 Direct pages scanned 8972 77283 43242 Kswapd pages scanned 20899983 8939566 14772851 Kswapd pages reclaimed 6193156 5172605 5231026 Direct pages reclaimed 8450 73802 39514 Kswapd efficiency 29% 57% 35% Kswapd velocity 3929.743 1847.499 3058.840 Direct efficiency 94% 95% 91% Direct velocity 1.687 15.972 8.954 Percentage direct scans 0% 0% 0% Zone normal velocity 3721.907 939.103 2185.142 Zone dma32 velocity 209.522 924.368 882.651 Zone dma velocity 0.000 0.000 0.000 Page writes by reclaim 4082185.000 526319.000 537114.000 Page writes file 738135 169091 32290 Page writes anon 3344050 357228 504824 Page reclaim immediate 9524 170 5595843 Sector Reads 8909900 861192 1483680 Sector Writes 13428980 1488744 2076800 Page rescued immediate 0 0 0 Slabs scanned 38016 31744 28672 Direct inode steals 0 0 0 Kswapd inode steals 424 0 0 Kswapd skipped wait 0 0 0 THP fault alloc 14 15 119 THP collapse alloc 1767 1569 1618 THP splits 30 29 25 THP fault fallback 0 0 0 THP collapse fail 8 5 0 Compaction stalls 17 41 100 Compaction success 7 31 95 Compaction failures 10 10 5 Page migrate success 7083 22157 62217 Page migrate failure 0 0 0 Compaction pages isolated 14847 48758 135830 Compaction migrate scanned 18328 48398 138929 Compaction free scanned 2000255 355827 1720269 Compaction cost 7 24 68 I guess the main takeaway again is the much reduced page writes from reclaim context and reduced reads. 3.9.0 3.9.0 3.9.0 vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10 Mean sda-avgqz 23.58 0.35 0.44 Mean sda-await 133.47 15.72 15.46 Mean sda-r_await 4.72 4.69 3.95 Mean sda-w_await 507.69 28.40 33.68 Max sda-avgqz 680.60 12.25 23.14 Max sda-await 3958.89 221.83 286.22 Max sda-r_await 63.86 61.23 67.29 Max sda-w_await 11710.38 883.57 1767.28 And as before, write wait times are much reduced. This patch: The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages encountered, not priority" decides whether to writeback pages from reclaim context based on the number of dirty pages encountered. This situation is flagged too easily and flushers are not given the chance to catch up resulting in more pages being written from reclaim context and potentially impacting IO performance. The check for PageWriteback is also misplaced as it happens within a PageDirty check which is nonsense as the dirty may have been cleared for IO. The accounting is updated very late and pages that are already under writeback, were reactivated, could not unmapped or could not be released are all missed. Similarly, a page is considered congested for reasons other than being congested and pages that cannot be written out in the correct context are skipped. Finally, it considers stalling and writing back filesystem pages due to encountering dirty anonymous pages at the tail of the LRU which is dumb. This patch causes kswapd to begin writing filesystem pages from reclaim context only if page reclaim found that all filesystem pages at the tail of the LRU were unqueued dirty pages. Before it starts writing filesystem pages, it will stall to give flushers a chance to catch up. The decision on whether wait_iff_congested is also now determined by dirty filesystem pages only. Congested pages are based on whether the underlying BDI is congested regardless of the context of the reclaiming process. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:57 +07:00
}
/*
* Stall direct reclaim for IO completions if underlying BDIs or zone
* is congested. Allow kswapd to continue until it starts encountering
* unqueued dirty pages or cycling through the LRU too quickly.
*/
if (!sc->hibernation_mode && !current_is_kswapd() &&
current_may_throttle())
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
wait_iff_congested(pgdat, BLK_RW_ASYNC, HZ/10);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
trace_mm_vmscan_lru_shrink_inactive(pgdat->node_id,
nr_scanned, nr_reclaimed,
sc->priority, file);
return nr_reclaimed;
}
/*
* This moves pages from the active list to the inactive list.
*
* We move them the other way if the page is referenced by one or more
* processes, from rmap.
*
* If the pages are mostly unmapped, the processing is fast and it is
* appropriate to hold zone_lru_lock across the whole operation. But if
* the pages are mapped, the processing is slow (page_referenced()) so we
* should drop zone_lru_lock around each page. It's impossible to balance
* this, so instead we remove the pages from the LRU while processing them.
* It is safe to rely on PG_active against the non-LRU pages in here because
* nobody will play with that bit on a non-LRU page.
*
* The downside is that we have to touch page->_refcount against each page.
* But we had to alter page->flags anyway.
*/
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 15:14:37 +07:00
static void move_active_pages_to_lru(struct lruvec *lruvec,
struct list_head *list,
mm: take pagevecs off reclaim stack Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru() by lists of pages_to_free: then apply Konstantin Khlebnikov's free_hot_cold_page_list() to them instead of pagevec_release(). Which simplifies the flow (no need to drop and retake lock whenever pagevec fills up) and reduces stale addresses in stack backtraces (which often showed through the pagevecs); but more importantly, removes another 120 bytes from the deepest stacks in page reclaim. Although I've not recently seen an actual stack overflow here with a vanilla kernel, move_active_pages_to_lru() has often featured in deep backtraces. However, free_hot_cold_page_list() does not handle compound pages (nor need it: a Transparent HugePage would have been split by the time it reaches the call in shrink_page_list()), but it is possible for putback_lru_pages() or move_active_pages_to_lru() to be left holding the last reference on a THP, so must exclude the unlikely compound case before putting on pages_to_free. Remove pagevec_strip(), its work now done in move_active_pages_to_lru(). The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c, but that is never on the reclaim path, and cannot be replaced by a list. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:56 +07:00
struct list_head *pages_to_free,
enum lru_list lru)
{
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
struct pglist_data *pgdat = lruvec_pgdat(lruvec);
unsigned long pgmoved = 0;
struct page *page;
int nr_pages;
while (!list_empty(list)) {
page = lru_to_page(list);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
lruvec = mem_cgroup_page_lruvec(page, pgdat);
VM_BUG_ON_PAGE(PageLRU(page), page);
SetPageLRU(page);
nr_pages = hpage_nr_pages(page);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
update_lru_size(lruvec, lru, page_zonenum(page), nr_pages);
list_move(&page->lru, &lruvec->lists[lru]);
pgmoved += nr_pages;
mm: take pagevecs off reclaim stack Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru() by lists of pages_to_free: then apply Konstantin Khlebnikov's free_hot_cold_page_list() to them instead of pagevec_release(). Which simplifies the flow (no need to drop and retake lock whenever pagevec fills up) and reduces stale addresses in stack backtraces (which often showed through the pagevecs); but more importantly, removes another 120 bytes from the deepest stacks in page reclaim. Although I've not recently seen an actual stack overflow here with a vanilla kernel, move_active_pages_to_lru() has often featured in deep backtraces. However, free_hot_cold_page_list() does not handle compound pages (nor need it: a Transparent HugePage would have been split by the time it reaches the call in shrink_page_list()), but it is possible for putback_lru_pages() or move_active_pages_to_lru() to be left holding the last reference on a THP, so must exclude the unlikely compound case before putting on pages_to_free. Remove pagevec_strip(), its work now done in move_active_pages_to_lru(). The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c, but that is never on the reclaim path, and cannot be replaced by a list. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:56 +07:00
if (put_page_testzero(page)) {
__ClearPageLRU(page);
__ClearPageActive(page);
del_page_from_lru_list(page, lruvec, lru);
mm: take pagevecs off reclaim stack Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru() by lists of pages_to_free: then apply Konstantin Khlebnikov's free_hot_cold_page_list() to them instead of pagevec_release(). Which simplifies the flow (no need to drop and retake lock whenever pagevec fills up) and reduces stale addresses in stack backtraces (which often showed through the pagevecs); but more importantly, removes another 120 bytes from the deepest stacks in page reclaim. Although I've not recently seen an actual stack overflow here with a vanilla kernel, move_active_pages_to_lru() has often featured in deep backtraces. However, free_hot_cold_page_list() does not handle compound pages (nor need it: a Transparent HugePage would have been split by the time it reaches the call in shrink_page_list()), but it is possible for putback_lru_pages() or move_active_pages_to_lru() to be left holding the last reference on a THP, so must exclude the unlikely compound case before putting on pages_to_free. Remove pagevec_strip(), its work now done in move_active_pages_to_lru(). The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c, but that is never on the reclaim path, and cannot be replaced by a list. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:56 +07:00
if (unlikely(PageCompound(page))) {
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_unlock_irq(&pgdat->lru_lock);
mem_cgroup_uncharge(page);
mm: take pagevecs off reclaim stack Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru() by lists of pages_to_free: then apply Konstantin Khlebnikov's free_hot_cold_page_list() to them instead of pagevec_release(). Which simplifies the flow (no need to drop and retake lock whenever pagevec fills up) and reduces stale addresses in stack backtraces (which often showed through the pagevecs); but more importantly, removes another 120 bytes from the deepest stacks in page reclaim. Although I've not recently seen an actual stack overflow here with a vanilla kernel, move_active_pages_to_lru() has often featured in deep backtraces. However, free_hot_cold_page_list() does not handle compound pages (nor need it: a Transparent HugePage would have been split by the time it reaches the call in shrink_page_list()), but it is possible for putback_lru_pages() or move_active_pages_to_lru() to be left holding the last reference on a THP, so must exclude the unlikely compound case before putting on pages_to_free. Remove pagevec_strip(), its work now done in move_active_pages_to_lru(). The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c, but that is never on the reclaim path, and cannot be replaced by a list. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:56 +07:00
(*get_compound_page_dtor(page))(page);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_lock_irq(&pgdat->lru_lock);
mm: take pagevecs off reclaim stack Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru() by lists of pages_to_free: then apply Konstantin Khlebnikov's free_hot_cold_page_list() to them instead of pagevec_release(). Which simplifies the flow (no need to drop and retake lock whenever pagevec fills up) and reduces stale addresses in stack backtraces (which often showed through the pagevecs); but more importantly, removes another 120 bytes from the deepest stacks in page reclaim. Although I've not recently seen an actual stack overflow here with a vanilla kernel, move_active_pages_to_lru() has often featured in deep backtraces. However, free_hot_cold_page_list() does not handle compound pages (nor need it: a Transparent HugePage would have been split by the time it reaches the call in shrink_page_list()), but it is possible for putback_lru_pages() or move_active_pages_to_lru() to be left holding the last reference on a THP, so must exclude the unlikely compound case before putting on pages_to_free. Remove pagevec_strip(), its work now done in move_active_pages_to_lru(). The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c, but that is never on the reclaim path, and cannot be replaced by a list. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:56 +07:00
} else
list_add(&page->lru, pages_to_free);
}
}
mm: update_lru_size do the __mod_zone_page_state Konstantin Khlebnikov pointed out (nearly four years ago, when lumpy reclaim was removed) that lru_size can be updated by -nr_taken once per call to isolate_lru_pages(), instead of page by page. Update it inside isolate_lru_pages(), or at its two callsites? I chose to update it at the callsites, rearranging and grouping the updates by nr_taken and nr_scanned together in both. With one exception, mem_cgroup_update_lru_size(,lru,) is then used where __mod_zone_page_state(,NR_LRU_BASE+lru,) is used; and we shall be adding some more calls in a future commit. Make the code a little smaller and simpler by incorporating stat update in lru_size update. The exception was move_active_pages_to_lru(), which aggregated the pgmoved stat update separately from the individual lru_size updates; but I still think this a simplification worth making. However, the __mod_zone_page_state is not peculiar to mem_cgroups: so better use the name update_lru_size, calls mem_cgroup_update_lru_size when CONFIG_MEMCG. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:38 +07:00
if (!is_active_lru(lru))
__count_vm_events(PGDEACTIVATE, pgmoved);
}
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 15:14:37 +07:00
static void shrink_active_list(unsigned long nr_to_scan,
struct lruvec *lruvec,
struct scan_control *sc,
enum lru_list lru)
{
unsigned long nr_taken;
unsigned long nr_scanned;
unsigned long vm_flags;
LIST_HEAD(l_hold); /* The pages which were snipped off */
vmscan: make mapped executable pages the first class citizen Protect referenced PROT_EXEC mapped pages from being deactivated. PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some currently running executables and their linked libraries, they shall really be cached aggressively to provide good user experiences. Thanks to Johannes Weiner for the advice to reuse the VMA walk in page_referenced() to get the PROT_EXEC bit. [more details] ( The consequences of this patch will have to be discussed together with Rik van Riel's recent patch "vmscan: evict use-once pages first". ) ( Some of the good points and insights are taken into this changelog. Thanks to all the involved people for the great LKML discussions. ) the problem =========== For a typical desktop, the most precious working set is composed of *actively accessed* (1) memory mapped executables (2) and their anonymous pages (3) and other files (4) and the dcache/icache/.. slabs while the least important data are (5) infrequently used or use-once files For a typical desktop, one major problem is busty and large amount of (5) use-once files flushing out the working set. Inside the working set, (4) dcache/icache have already been too sticky ;-) So we only have to care (2) anonymous and (1)(3) file pages. anonymous pages =============== Anonymous pages are effectively immune to the streaming IO attack, because we now have separate file/anon LRU lists. When the use-once files crowd into the file LRU, the list's "quality" is significantly lowered. Therefore the scan balance policy in get_scan_ratio() will choose to scan the (low quality) file LRU much more frequently than the anon LRU. file pages ========== Rik proposed to *not* scan the active file LRU when the inactive list grows larger than active list. This guarantees that when there are use-once streaming IO, and the working set is not too large(so that active_size < inactive_size), the active file LRU will *not* be scanned at all. So the not-too-large working set can be well protected. But there are also situations where the file working set is a bit large so that (active_size >= inactive_size), or the streaming IOs are not purely use-once. In these cases, the active list will be scanned slowly. Because the current shrink_active_list() policy is to deactivate active pages regardless of their referenced bits. The deactivated pages become susceptible to the streaming IO attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that the deactivated pages don't have enough time to get re-referenced. Because a user tend to switch between windows in intervals from seconds to minutes. This patch holds mapped executable pages in the active list as long as they are referenced during each full scan of the active list. Because the active list is normally scanned much slower, they get longer grace time (eg. 100s) for further references, which better matches the pace of user operations. Therefore this patch greatly prolongs the in-cache time of executable code, when there are moderate memory pressures. before patch: guaranteed to be cached if reference intervals < I after patch: guaranteed to be cached if reference intervals < I+A (except when randomly reclaimed by the lumpy reclaim) where A = time to fully scan the active file LRU I = time to fully scan the inactive file LRU Note that normally A >> I. side effects ============ This patch is safe in general, it restores the pre-2.6.28 mmap() behavior but in a much smaller and well targeted scope. One may worry about some one to abuse the PROT_EXEC heuristic. But as Andrew Morton stated, there are other tricks to getting that sort of boost. Another concern is the PROT_EXEC mapped pages growing large in rare cases, and therefore hurting reclaim efficiency. But a sane application targeted for large audience will never use PROT_EXEC for data mappings. If some home made application tries to abuse that bit, it shall be aware of the consequences. If it is abused to scale of 2/3 total memory, it gains nothing but overheads. benchmarks ========== 1) memory tight desktop 1.1) brief summary - clock time and major faults are reduced by 50%; - pswpin numbers are reduced to ~1/3. That means X desktop responsiveness is doubled under high memory/swap pressure. 1.2) test scenario - nfsroot gnome desktop with 512M physical memory - run some programs, and switch between the existing windows after starting each new program. 1.3) progress timing (seconds) before after programs 0.02 0.02 N xeyes 0.75 0.76 N firefox 2.02 1.88 N nautilus 3.36 3.17 N nautilus --browser 5.26 4.89 N gthumb 7.12 6.47 N gedit 9.22 8.16 N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf 13.58 12.55 N xterm 15.87 14.57 N mlterm 18.63 17.06 N gnome-terminal 21.16 18.90 N urxvt 26.24 23.48 N gnome-system-monitor 28.72 26.52 N gnome-help 32.15 29.65 N gnome-dictionary 39.66 36.12 N /usr/games/sol 43.16 39.27 N /usr/games/gnometris 48.65 42.56 N /usr/games/gnect 53.31 47.03 N /usr/games/gtali 58.60 52.05 N /usr/games/iagno 65.77 55.42 N /usr/games/gnotravex 70.76 61.47 N /usr/games/mahjongg 76.15 67.11 N /usr/games/gnome-sudoku 86.32 75.15 N /usr/games/glines 92.21 79.70 N /usr/games/glchess 103.79 88.48 N /usr/games/gnomine 113.84 96.51 N /usr/games/gnotski 124.40 102.19 N /usr/games/gnibbles 137.41 114.93 N /usr/games/gnobots2 155.53 125.02 N /usr/games/blackjack 179.85 135.11 N /usr/games/same-gnome 224.49 154.50 N /usr/bin/gnome-window-properties 248.44 162.09 N /usr/bin/gnome-default-applications-properties 282.62 173.29 N /usr/bin/gnome-at-properties 323.72 188.21 N /usr/bin/gnome-typing-monitor 363.99 199.93 N /usr/bin/gnome-at-visual 394.21 206.95 N /usr/bin/gnome-sound-properties 435.14 224.49 N /usr/bin/gnome-at-mobility 463.05 234.11 N /usr/bin/gnome-keybinding-properties 503.75 248.59 N /usr/bin/gnome-about-me 554.00 276.27 N /usr/bin/gnome-display-properties 615.48 304.39 N /usr/bin/gnome-network-preferences 693.03 342.01 N /usr/bin/gnome-mouse-properties 759.90 388.58 N /usr/bin/gnome-appearance-properties 937.90 508.47 N /usr/bin/gnome-control-center 1109.75 587.57 N /usr/bin/gnome-keyboard-properties 1399.05 758.16 N : oocalc 1524.64 830.03 N : oodraw 1684.31 900.03 N : ooimpress 1874.04 993.91 N : oomath 2115.12 1081.89 N : ooweb 2369.02 1161.99 N : oowriter Note that the last ": oo*" commands are actually commented out. 1.4) vmstat numbers (some relevant ones are marked with *) before after nr_free_pages 1293 3898 nr_inactive_anon 59956 53460 nr_active_anon 26815 30026 nr_inactive_file 2657 3218 nr_active_file 2019 2806 nr_unevictable 4 4 nr_mlock 4 4 nr_anon_pages 26706 27859 *nr_mapped 3542 4469 nr_file_pages 72232 67681 nr_dirty 1 0 nr_writeback 123 19 nr_slab_reclaimable 3375 3534 nr_slab_unreclaimable 11405 10665 nr_page_table_pages 8106 7864 nr_unstable 0 0 nr_bounce 0 0 *nr_vmscan_write 394776 230839 nr_writeback_temp 0 0 numa_hit 6843353 3318676 numa_miss 0 0 numa_foreign 0 0 numa_interleave 1719 1719 numa_local 6843353 3318676 numa_other 0 0 *pgpgin 5954683 2057175 *pgpgout 1578276 922744 *pswpin 1486615 512238 *pswpout 394568 230685 pgalloc_dma 277432 56602 pgalloc_dma32 6769477 3310348 pgalloc_normal 0 0 pgalloc_movable 0 0 pgfree 7048396 3371118 pgactivate 2036343 1471492 pgdeactivate 2189691 1612829 pgfault 3702176 3100702 *pgmajfault 452116 201343 pgrefill_dma 12185 7127 pgrefill_dma32 334384 653703 pgrefill_normal 0 0 pgrefill_movable 0 0 pgsteal_dma 74214 22179 pgsteal_dma32 3334164 1638029 pgsteal_normal 0 0 pgsteal_movable 0 0 pgscan_kswapd_dma 1081421 1216199 pgscan_kswapd_dma32 58979118 46002810 pgscan_kswapd_normal 0 0 pgscan_kswapd_movable 0 0 pgscan_direct_dma 2015438 1086109 pgscan_direct_dma32 55787823 36101597 pgscan_direct_normal 0 0 pgscan_direct_movable 0 0 pginodesteal 3461 7281 slabs_scanned 564864 527616 kswapd_steal 2889797 1448082 kswapd_inodesteal 14827 14835 pageoutrun 43459 21562 allocstall 9653 4032 pgrotated 384216 228631 1.5) free numbers at the end of the tests before patch: total used free shared buffers cached Mem: 474 467 7 0 0 236 -/+ buffers/cache: 230 243 Swap: 1023 418 605 after patch: total used free shared buffers cached Mem: 474 457 16 0 0 236 -/+ buffers/cache: 221 253 Swap: 1023 404 619 2) memory flushing in a file server 2.1) brief summary The number of major faults from 50 to 3 during 10% cache hot reads. That means this patch successfully stops major faults when the active file list is slowly scanned when there are partially cache hot streaming IO. 2.2) test scenario Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the pages will be activated: for i in `seq 0 100 10000000`; do echo $i 110; done > pattern-hot-10 iotrace.rb --load pattern-hot-10 --play /b/sparse vmmon nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree and monitor /proc/vmstat during the time. The test box has 2G memory. I carried out tests on fresh booted console as well as X desktop, and fetched the vmstat numbers on (1) begin: shortly after the big read IO starts; (2) end: just before the big read IO stops; (3) restore: the big read IO stops and the zsh working set restored (4) restore X: after IO, switch back and forth between the urxvt and firefox windows to restore their working set. 2.3) console mode results nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.29 VM_EXEC protection ON: begin: 2481 2237 8694 630 0 574299 end: 275 231976 233914 633 776271 20933042 restore: 370 232154 234524 691 777183 20958453 2.6.29 VM_EXEC protection ON (second run): begin: 2434 2237 8493 629 0 574195 end: 284 231970 233536 632 771918 20896129 restore: 399 232218 234789 690 774526 20957909 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 2479 2344 9659 210 0 579643 end: 284 232010 234142 260 772776 20917184 restore: 379 232159 234371 301 774888 20967849 The above console numbers show that - The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29. I'd attribute that improvement to the mmap readahead improvements :-) - The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50. That's a huge improvement - which means with the VM_EXEC protection logic, active mmap pages is pretty safe even under partially cache hot streaming IO. - when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8 under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree) That roughly means the active mmap pages get 20.8 more chances to get re-referenced to stay in memory. - The absolute nr_mapped drops considerably to 1/9 during the big IO, and the dropped pages are mostly inactive ones. The patch has almost no impact in this aspect, that means it won't unnecessarily increase memory pressure. (In contrast, your 20% mmap protection ratio will keep them all, and therefore eliminate the extra 41 major faults to restore working set of zsh etc.) The iotrace.rb read throughput is 151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse which means the inactive list is rotated at the speed of 250MB/s, so a full scan of which takes about 3.5 seconds, while a full scan of active file list takes about 77 seconds. 2.4) X mode results We can reach roughly the same conclusions for X desktop: nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.30-rc4-mm VM_EXEC protection ON: begin: 9740 8920 64075 561 0 678360 end: 768 218254 220029 565 798953 21057006 restore: 857 218543 220987 606 799462 21075710 restore X: 2414 218560 225344 797 799462 21080795 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 9368 5035 26389 554 0 633391 end: 770 218449 221230 661 646472 17832500 restore: 1113 218466 220978 710 649881 17905235 restore X: 2687 218650 225484 947 802700 21083584 - the absolute nr_mapped drops considerably (to 1/13 of the original size) during the streaming IO. - the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393 during the whole process. Cc: Elladan <elladan@eskimo.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:12 +07:00
LIST_HEAD(l_active);
LIST_HEAD(l_inactive);
struct page *page;
struct zone_reclaim_stat *reclaim_stat = &lruvec->reclaim_stat;
unsigned long nr_rotated = 0;
isolate_mode_t isolate_mode = 0;
int file = is_file_lru(lru);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
struct pglist_data *pgdat = lruvec_pgdat(lruvec);
lru_add_drain();
if (!sc->may_unmap)
isolate_mode |= ISOLATE_UNMAPPED;
if (!sc->may_writepage)
isolate_mode |= ISOLATE_CLEAN;
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_lock_irq(&pgdat->lru_lock);
nr_taken = isolate_lru_pages(nr_to_scan, lruvec, &l_hold,
&nr_scanned, sc, isolate_mode, lru);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
__mod_node_page_state(pgdat, NR_ISOLATED_ANON + file, nr_taken);
reclaim_stat->recent_scanned[file] += nr_taken;
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 15:14:37 +07:00
mm: update_lru_size do the __mod_zone_page_state Konstantin Khlebnikov pointed out (nearly four years ago, when lumpy reclaim was removed) that lru_size can be updated by -nr_taken once per call to isolate_lru_pages(), instead of page by page. Update it inside isolate_lru_pages(), or at its two callsites? I chose to update it at the callsites, rearranging and grouping the updates by nr_taken and nr_scanned together in both. With one exception, mem_cgroup_update_lru_size(,lru,) is then used where __mod_zone_page_state(,NR_LRU_BASE+lru,) is used; and we shall be adding some more calls in a future commit. Make the code a little smaller and simpler by incorporating stat update in lru_size update. The exception was move_active_pages_to_lru(), which aggregated the pgmoved stat update separately from the individual lru_size updates; but I still think this a simplification worth making. However, the __mod_zone_page_state is not peculiar to mem_cgroups: so better use the name update_lru_size, calls mem_cgroup_update_lru_size when CONFIG_MEMCG. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:38 +07:00
if (global_reclaim(sc))
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
__mod_node_page_state(pgdat, NR_PAGES_SCANNED, nr_scanned);
__count_vm_events(PGREFILL, nr_scanned);
mm: update_lru_size do the __mod_zone_page_state Konstantin Khlebnikov pointed out (nearly four years ago, when lumpy reclaim was removed) that lru_size can be updated by -nr_taken once per call to isolate_lru_pages(), instead of page by page. Update it inside isolate_lru_pages(), or at its two callsites? I chose to update it at the callsites, rearranging and grouping the updates by nr_taken and nr_scanned together in both. With one exception, mem_cgroup_update_lru_size(,lru,) is then used where __mod_zone_page_state(,NR_LRU_BASE+lru,) is used; and we shall be adding some more calls in a future commit. Make the code a little smaller and simpler by incorporating stat update in lru_size update. The exception was move_active_pages_to_lru(), which aggregated the pgmoved stat update separately from the individual lru_size updates; but I still think this a simplification worth making. However, the __mod_zone_page_state is not peculiar to mem_cgroups: so better use the name update_lru_size, calls mem_cgroup_update_lru_size when CONFIG_MEMCG. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:38 +07:00
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_unlock_irq(&pgdat->lru_lock);
while (!list_empty(&l_hold)) {
cond_resched();
page = lru_to_page(&l_hold);
list_del(&page->lru);
if (unlikely(!page_evictable(page))) {
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
putback_lru_page(page);
continue;
}
mm: vmscan: forcibly scan highmem if there are too many buffer_heads pinning highmem Stuart Foster reported on bugzilla that copying large amounts of data from NTFS caused an OOM kill on 32-bit X86 with 16G of memory. Andrew Morton correctly identified that the problem was NTFS was using 512 blocks meaning each page had 8 buffer_heads in low memory pinning it. In the past, direct reclaim used to scan highmem even if the allocating process did not specify __GFP_HIGHMEM but not any more. kswapd no longer will reclaim from zones that are above the high watermark. The intention in both cases was to minimise unnecessary reclaim. The downside is on machines with large amounts of highmem that lowmem can be fully consumed by buffer_heads with nothing trying to free them. The following patch is based on a suggestion by Andrew Morton to extend the buffer_heads_over_limit case to force kswapd and direct reclaim to scan the highmem zone regardless of the allocation request or watermarks. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42578 [hughd@google.com: move buffer_heads_over_limit check up] [akpm@linux-foundation.org: buffer_heads_over_limit is unlikely] Reported-by: Stuart Foster <smf.linux@ntlworld.com> Tested-by: Stuart Foster <smf.linux@ntlworld.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:00 +07:00
if (unlikely(buffer_heads_over_limit)) {
if (page_has_private(page) && trylock_page(page)) {
if (page_has_private(page))
try_to_release_page(page, 0);
unlock_page(page);
}
}
mm: memcg: count pte references from every member of the reclaimed hierarchy The rmap walker checking page table references has historically ignored references from VMAs that were not part of the memcg that was being reclaimed during memcg hard limit reclaim. When transitioning global reclaim to memcg hierarchy reclaim, I missed that bit and now references from outside a memcg are ignored even during global reclaim. Reverting back to traditional behaviour - count all references during global reclaim and only mind references of the memcg being reclaimed during limit reclaim would be one option. However, the more generic idea is to ignore references exactly then when they are outside the hierarchy that is currently under reclaim; because only then will their reclamation be of any use to help the pressure situation. It makes no sense to ignore references from a sibling memcg and then evict a page that will be immediately refaulted by that sibling which contributes to the same usage of the common ancestor under reclaim. The solution: make the rmap walker ignore references from VMAs that are not part of the hierarchy that is being reclaimed. Flat limit reclaim will stay the same, hierarchical limit reclaim will mind the references only to pages that the hierarchy owns. Global reclaim, since it reclaims from all memcgs, will be fixed to regard all references. [akpm@linux-foundation.org: name the args in the declaration] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Konstantin Khlebnikov<khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:25 +07:00
if (page_referenced(page, 0, sc->target_mem_cgroup,
&vm_flags)) {
nr_rotated += hpage_nr_pages(page);
vmscan: make mapped executable pages the first class citizen Protect referenced PROT_EXEC mapped pages from being deactivated. PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some currently running executables and their linked libraries, they shall really be cached aggressively to provide good user experiences. Thanks to Johannes Weiner for the advice to reuse the VMA walk in page_referenced() to get the PROT_EXEC bit. [more details] ( The consequences of this patch will have to be discussed together with Rik van Riel's recent patch "vmscan: evict use-once pages first". ) ( Some of the good points and insights are taken into this changelog. Thanks to all the involved people for the great LKML discussions. ) the problem =========== For a typical desktop, the most precious working set is composed of *actively accessed* (1) memory mapped executables (2) and their anonymous pages (3) and other files (4) and the dcache/icache/.. slabs while the least important data are (5) infrequently used or use-once files For a typical desktop, one major problem is busty and large amount of (5) use-once files flushing out the working set. Inside the working set, (4) dcache/icache have already been too sticky ;-) So we only have to care (2) anonymous and (1)(3) file pages. anonymous pages =============== Anonymous pages are effectively immune to the streaming IO attack, because we now have separate file/anon LRU lists. When the use-once files crowd into the file LRU, the list's "quality" is significantly lowered. Therefore the scan balance policy in get_scan_ratio() will choose to scan the (low quality) file LRU much more frequently than the anon LRU. file pages ========== Rik proposed to *not* scan the active file LRU when the inactive list grows larger than active list. This guarantees that when there are use-once streaming IO, and the working set is not too large(so that active_size < inactive_size), the active file LRU will *not* be scanned at all. So the not-too-large working set can be well protected. But there are also situations where the file working set is a bit large so that (active_size >= inactive_size), or the streaming IOs are not purely use-once. In these cases, the active list will be scanned slowly. Because the current shrink_active_list() policy is to deactivate active pages regardless of their referenced bits. The deactivated pages become susceptible to the streaming IO attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that the deactivated pages don't have enough time to get re-referenced. Because a user tend to switch between windows in intervals from seconds to minutes. This patch holds mapped executable pages in the active list as long as they are referenced during each full scan of the active list. Because the active list is normally scanned much slower, they get longer grace time (eg. 100s) for further references, which better matches the pace of user operations. Therefore this patch greatly prolongs the in-cache time of executable code, when there are moderate memory pressures. before patch: guaranteed to be cached if reference intervals < I after patch: guaranteed to be cached if reference intervals < I+A (except when randomly reclaimed by the lumpy reclaim) where A = time to fully scan the active file LRU I = time to fully scan the inactive file LRU Note that normally A >> I. side effects ============ This patch is safe in general, it restores the pre-2.6.28 mmap() behavior but in a much smaller and well targeted scope. One may worry about some one to abuse the PROT_EXEC heuristic. But as Andrew Morton stated, there are other tricks to getting that sort of boost. Another concern is the PROT_EXEC mapped pages growing large in rare cases, and therefore hurting reclaim efficiency. But a sane application targeted for large audience will never use PROT_EXEC for data mappings. If some home made application tries to abuse that bit, it shall be aware of the consequences. If it is abused to scale of 2/3 total memory, it gains nothing but overheads. benchmarks ========== 1) memory tight desktop 1.1) brief summary - clock time and major faults are reduced by 50%; - pswpin numbers are reduced to ~1/3. That means X desktop responsiveness is doubled under high memory/swap pressure. 1.2) test scenario - nfsroot gnome desktop with 512M physical memory - run some programs, and switch between the existing windows after starting each new program. 1.3) progress timing (seconds) before after programs 0.02 0.02 N xeyes 0.75 0.76 N firefox 2.02 1.88 N nautilus 3.36 3.17 N nautilus --browser 5.26 4.89 N gthumb 7.12 6.47 N gedit 9.22 8.16 N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf 13.58 12.55 N xterm 15.87 14.57 N mlterm 18.63 17.06 N gnome-terminal 21.16 18.90 N urxvt 26.24 23.48 N gnome-system-monitor 28.72 26.52 N gnome-help 32.15 29.65 N gnome-dictionary 39.66 36.12 N /usr/games/sol 43.16 39.27 N /usr/games/gnometris 48.65 42.56 N /usr/games/gnect 53.31 47.03 N /usr/games/gtali 58.60 52.05 N /usr/games/iagno 65.77 55.42 N /usr/games/gnotravex 70.76 61.47 N /usr/games/mahjongg 76.15 67.11 N /usr/games/gnome-sudoku 86.32 75.15 N /usr/games/glines 92.21 79.70 N /usr/games/glchess 103.79 88.48 N /usr/games/gnomine 113.84 96.51 N /usr/games/gnotski 124.40 102.19 N /usr/games/gnibbles 137.41 114.93 N /usr/games/gnobots2 155.53 125.02 N /usr/games/blackjack 179.85 135.11 N /usr/games/same-gnome 224.49 154.50 N /usr/bin/gnome-window-properties 248.44 162.09 N /usr/bin/gnome-default-applications-properties 282.62 173.29 N /usr/bin/gnome-at-properties 323.72 188.21 N /usr/bin/gnome-typing-monitor 363.99 199.93 N /usr/bin/gnome-at-visual 394.21 206.95 N /usr/bin/gnome-sound-properties 435.14 224.49 N /usr/bin/gnome-at-mobility 463.05 234.11 N /usr/bin/gnome-keybinding-properties 503.75 248.59 N /usr/bin/gnome-about-me 554.00 276.27 N /usr/bin/gnome-display-properties 615.48 304.39 N /usr/bin/gnome-network-preferences 693.03 342.01 N /usr/bin/gnome-mouse-properties 759.90 388.58 N /usr/bin/gnome-appearance-properties 937.90 508.47 N /usr/bin/gnome-control-center 1109.75 587.57 N /usr/bin/gnome-keyboard-properties 1399.05 758.16 N : oocalc 1524.64 830.03 N : oodraw 1684.31 900.03 N : ooimpress 1874.04 993.91 N : oomath 2115.12 1081.89 N : ooweb 2369.02 1161.99 N : oowriter Note that the last ": oo*" commands are actually commented out. 1.4) vmstat numbers (some relevant ones are marked with *) before after nr_free_pages 1293 3898 nr_inactive_anon 59956 53460 nr_active_anon 26815 30026 nr_inactive_file 2657 3218 nr_active_file 2019 2806 nr_unevictable 4 4 nr_mlock 4 4 nr_anon_pages 26706 27859 *nr_mapped 3542 4469 nr_file_pages 72232 67681 nr_dirty 1 0 nr_writeback 123 19 nr_slab_reclaimable 3375 3534 nr_slab_unreclaimable 11405 10665 nr_page_table_pages 8106 7864 nr_unstable 0 0 nr_bounce 0 0 *nr_vmscan_write 394776 230839 nr_writeback_temp 0 0 numa_hit 6843353 3318676 numa_miss 0 0 numa_foreign 0 0 numa_interleave 1719 1719 numa_local 6843353 3318676 numa_other 0 0 *pgpgin 5954683 2057175 *pgpgout 1578276 922744 *pswpin 1486615 512238 *pswpout 394568 230685 pgalloc_dma 277432 56602 pgalloc_dma32 6769477 3310348 pgalloc_normal 0 0 pgalloc_movable 0 0 pgfree 7048396 3371118 pgactivate 2036343 1471492 pgdeactivate 2189691 1612829 pgfault 3702176 3100702 *pgmajfault 452116 201343 pgrefill_dma 12185 7127 pgrefill_dma32 334384 653703 pgrefill_normal 0 0 pgrefill_movable 0 0 pgsteal_dma 74214 22179 pgsteal_dma32 3334164 1638029 pgsteal_normal 0 0 pgsteal_movable 0 0 pgscan_kswapd_dma 1081421 1216199 pgscan_kswapd_dma32 58979118 46002810 pgscan_kswapd_normal 0 0 pgscan_kswapd_movable 0 0 pgscan_direct_dma 2015438 1086109 pgscan_direct_dma32 55787823 36101597 pgscan_direct_normal 0 0 pgscan_direct_movable 0 0 pginodesteal 3461 7281 slabs_scanned 564864 527616 kswapd_steal 2889797 1448082 kswapd_inodesteal 14827 14835 pageoutrun 43459 21562 allocstall 9653 4032 pgrotated 384216 228631 1.5) free numbers at the end of the tests before patch: total used free shared buffers cached Mem: 474 467 7 0 0 236 -/+ buffers/cache: 230 243 Swap: 1023 418 605 after patch: total used free shared buffers cached Mem: 474 457 16 0 0 236 -/+ buffers/cache: 221 253 Swap: 1023 404 619 2) memory flushing in a file server 2.1) brief summary The number of major faults from 50 to 3 during 10% cache hot reads. That means this patch successfully stops major faults when the active file list is slowly scanned when there are partially cache hot streaming IO. 2.2) test scenario Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the pages will be activated: for i in `seq 0 100 10000000`; do echo $i 110; done > pattern-hot-10 iotrace.rb --load pattern-hot-10 --play /b/sparse vmmon nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree and monitor /proc/vmstat during the time. The test box has 2G memory. I carried out tests on fresh booted console as well as X desktop, and fetched the vmstat numbers on (1) begin: shortly after the big read IO starts; (2) end: just before the big read IO stops; (3) restore: the big read IO stops and the zsh working set restored (4) restore X: after IO, switch back and forth between the urxvt and firefox windows to restore their working set. 2.3) console mode results nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.29 VM_EXEC protection ON: begin: 2481 2237 8694 630 0 574299 end: 275 231976 233914 633 776271 20933042 restore: 370 232154 234524 691 777183 20958453 2.6.29 VM_EXEC protection ON (second run): begin: 2434 2237 8493 629 0 574195 end: 284 231970 233536 632 771918 20896129 restore: 399 232218 234789 690 774526 20957909 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 2479 2344 9659 210 0 579643 end: 284 232010 234142 260 772776 20917184 restore: 379 232159 234371 301 774888 20967849 The above console numbers show that - The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29. I'd attribute that improvement to the mmap readahead improvements :-) - The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50. That's a huge improvement - which means with the VM_EXEC protection logic, active mmap pages is pretty safe even under partially cache hot streaming IO. - when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8 under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree) That roughly means the active mmap pages get 20.8 more chances to get re-referenced to stay in memory. - The absolute nr_mapped drops considerably to 1/9 during the big IO, and the dropped pages are mostly inactive ones. The patch has almost no impact in this aspect, that means it won't unnecessarily increase memory pressure. (In contrast, your 20% mmap protection ratio will keep them all, and therefore eliminate the extra 41 major faults to restore working set of zsh etc.) The iotrace.rb read throughput is 151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse which means the inactive list is rotated at the speed of 250MB/s, so a full scan of which takes about 3.5 seconds, while a full scan of active file list takes about 77 seconds. 2.4) X mode results We can reach roughly the same conclusions for X desktop: nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.30-rc4-mm VM_EXEC protection ON: begin: 9740 8920 64075 561 0 678360 end: 768 218254 220029 565 798953 21057006 restore: 857 218543 220987 606 799462 21075710 restore X: 2414 218560 225344 797 799462 21080795 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 9368 5035 26389 554 0 633391 end: 770 218449 221230 661 646472 17832500 restore: 1113 218466 220978 710 649881 17905235 restore X: 2687 218650 225484 947 802700 21083584 - the absolute nr_mapped drops considerably (to 1/13 of the original size) during the streaming IO. - the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393 during the whole process. Cc: Elladan <elladan@eskimo.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:12 +07:00
/*
* Identify referenced, file-backed active pages and
* give them one more trip around the active list. So
* that executable code get better chances to stay in
* memory under moderate memory pressure. Anon pages
* are not likely to be evicted by use-once streaming
* IO, plus JVM can create lots of anon VM_EXEC pages,
* so we ignore them here.
*/
if ((vm_flags & VM_EXEC) && page_is_file_cache(page)) {
vmscan: make mapped executable pages the first class citizen Protect referenced PROT_EXEC mapped pages from being deactivated. PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some currently running executables and their linked libraries, they shall really be cached aggressively to provide good user experiences. Thanks to Johannes Weiner for the advice to reuse the VMA walk in page_referenced() to get the PROT_EXEC bit. [more details] ( The consequences of this patch will have to be discussed together with Rik van Riel's recent patch "vmscan: evict use-once pages first". ) ( Some of the good points and insights are taken into this changelog. Thanks to all the involved people for the great LKML discussions. ) the problem =========== For a typical desktop, the most precious working set is composed of *actively accessed* (1) memory mapped executables (2) and their anonymous pages (3) and other files (4) and the dcache/icache/.. slabs while the least important data are (5) infrequently used or use-once files For a typical desktop, one major problem is busty and large amount of (5) use-once files flushing out the working set. Inside the working set, (4) dcache/icache have already been too sticky ;-) So we only have to care (2) anonymous and (1)(3) file pages. anonymous pages =============== Anonymous pages are effectively immune to the streaming IO attack, because we now have separate file/anon LRU lists. When the use-once files crowd into the file LRU, the list's "quality" is significantly lowered. Therefore the scan balance policy in get_scan_ratio() will choose to scan the (low quality) file LRU much more frequently than the anon LRU. file pages ========== Rik proposed to *not* scan the active file LRU when the inactive list grows larger than active list. This guarantees that when there are use-once streaming IO, and the working set is not too large(so that active_size < inactive_size), the active file LRU will *not* be scanned at all. So the not-too-large working set can be well protected. But there are also situations where the file working set is a bit large so that (active_size >= inactive_size), or the streaming IOs are not purely use-once. In these cases, the active list will be scanned slowly. Because the current shrink_active_list() policy is to deactivate active pages regardless of their referenced bits. The deactivated pages become susceptible to the streaming IO attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that the deactivated pages don't have enough time to get re-referenced. Because a user tend to switch between windows in intervals from seconds to minutes. This patch holds mapped executable pages in the active list as long as they are referenced during each full scan of the active list. Because the active list is normally scanned much slower, they get longer grace time (eg. 100s) for further references, which better matches the pace of user operations. Therefore this patch greatly prolongs the in-cache time of executable code, when there are moderate memory pressures. before patch: guaranteed to be cached if reference intervals < I after patch: guaranteed to be cached if reference intervals < I+A (except when randomly reclaimed by the lumpy reclaim) where A = time to fully scan the active file LRU I = time to fully scan the inactive file LRU Note that normally A >> I. side effects ============ This patch is safe in general, it restores the pre-2.6.28 mmap() behavior but in a much smaller and well targeted scope. One may worry about some one to abuse the PROT_EXEC heuristic. But as Andrew Morton stated, there are other tricks to getting that sort of boost. Another concern is the PROT_EXEC mapped pages growing large in rare cases, and therefore hurting reclaim efficiency. But a sane application targeted for large audience will never use PROT_EXEC for data mappings. If some home made application tries to abuse that bit, it shall be aware of the consequences. If it is abused to scale of 2/3 total memory, it gains nothing but overheads. benchmarks ========== 1) memory tight desktop 1.1) brief summary - clock time and major faults are reduced by 50%; - pswpin numbers are reduced to ~1/3. That means X desktop responsiveness is doubled under high memory/swap pressure. 1.2) test scenario - nfsroot gnome desktop with 512M physical memory - run some programs, and switch between the existing windows after starting each new program. 1.3) progress timing (seconds) before after programs 0.02 0.02 N xeyes 0.75 0.76 N firefox 2.02 1.88 N nautilus 3.36 3.17 N nautilus --browser 5.26 4.89 N gthumb 7.12 6.47 N gedit 9.22 8.16 N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf 13.58 12.55 N xterm 15.87 14.57 N mlterm 18.63 17.06 N gnome-terminal 21.16 18.90 N urxvt 26.24 23.48 N gnome-system-monitor 28.72 26.52 N gnome-help 32.15 29.65 N gnome-dictionary 39.66 36.12 N /usr/games/sol 43.16 39.27 N /usr/games/gnometris 48.65 42.56 N /usr/games/gnect 53.31 47.03 N /usr/games/gtali 58.60 52.05 N /usr/games/iagno 65.77 55.42 N /usr/games/gnotravex 70.76 61.47 N /usr/games/mahjongg 76.15 67.11 N /usr/games/gnome-sudoku 86.32 75.15 N /usr/games/glines 92.21 79.70 N /usr/games/glchess 103.79 88.48 N /usr/games/gnomine 113.84 96.51 N /usr/games/gnotski 124.40 102.19 N /usr/games/gnibbles 137.41 114.93 N /usr/games/gnobots2 155.53 125.02 N /usr/games/blackjack 179.85 135.11 N /usr/games/same-gnome 224.49 154.50 N /usr/bin/gnome-window-properties 248.44 162.09 N /usr/bin/gnome-default-applications-properties 282.62 173.29 N /usr/bin/gnome-at-properties 323.72 188.21 N /usr/bin/gnome-typing-monitor 363.99 199.93 N /usr/bin/gnome-at-visual 394.21 206.95 N /usr/bin/gnome-sound-properties 435.14 224.49 N /usr/bin/gnome-at-mobility 463.05 234.11 N /usr/bin/gnome-keybinding-properties 503.75 248.59 N /usr/bin/gnome-about-me 554.00 276.27 N /usr/bin/gnome-display-properties 615.48 304.39 N /usr/bin/gnome-network-preferences 693.03 342.01 N /usr/bin/gnome-mouse-properties 759.90 388.58 N /usr/bin/gnome-appearance-properties 937.90 508.47 N /usr/bin/gnome-control-center 1109.75 587.57 N /usr/bin/gnome-keyboard-properties 1399.05 758.16 N : oocalc 1524.64 830.03 N : oodraw 1684.31 900.03 N : ooimpress 1874.04 993.91 N : oomath 2115.12 1081.89 N : ooweb 2369.02 1161.99 N : oowriter Note that the last ": oo*" commands are actually commented out. 1.4) vmstat numbers (some relevant ones are marked with *) before after nr_free_pages 1293 3898 nr_inactive_anon 59956 53460 nr_active_anon 26815 30026 nr_inactive_file 2657 3218 nr_active_file 2019 2806 nr_unevictable 4 4 nr_mlock 4 4 nr_anon_pages 26706 27859 *nr_mapped 3542 4469 nr_file_pages 72232 67681 nr_dirty 1 0 nr_writeback 123 19 nr_slab_reclaimable 3375 3534 nr_slab_unreclaimable 11405 10665 nr_page_table_pages 8106 7864 nr_unstable 0 0 nr_bounce 0 0 *nr_vmscan_write 394776 230839 nr_writeback_temp 0 0 numa_hit 6843353 3318676 numa_miss 0 0 numa_foreign 0 0 numa_interleave 1719 1719 numa_local 6843353 3318676 numa_other 0 0 *pgpgin 5954683 2057175 *pgpgout 1578276 922744 *pswpin 1486615 512238 *pswpout 394568 230685 pgalloc_dma 277432 56602 pgalloc_dma32 6769477 3310348 pgalloc_normal 0 0 pgalloc_movable 0 0 pgfree 7048396 3371118 pgactivate 2036343 1471492 pgdeactivate 2189691 1612829 pgfault 3702176 3100702 *pgmajfault 452116 201343 pgrefill_dma 12185 7127 pgrefill_dma32 334384 653703 pgrefill_normal 0 0 pgrefill_movable 0 0 pgsteal_dma 74214 22179 pgsteal_dma32 3334164 1638029 pgsteal_normal 0 0 pgsteal_movable 0 0 pgscan_kswapd_dma 1081421 1216199 pgscan_kswapd_dma32 58979118 46002810 pgscan_kswapd_normal 0 0 pgscan_kswapd_movable 0 0 pgscan_direct_dma 2015438 1086109 pgscan_direct_dma32 55787823 36101597 pgscan_direct_normal 0 0 pgscan_direct_movable 0 0 pginodesteal 3461 7281 slabs_scanned 564864 527616 kswapd_steal 2889797 1448082 kswapd_inodesteal 14827 14835 pageoutrun 43459 21562 allocstall 9653 4032 pgrotated 384216 228631 1.5) free numbers at the end of the tests before patch: total used free shared buffers cached Mem: 474 467 7 0 0 236 -/+ buffers/cache: 230 243 Swap: 1023 418 605 after patch: total used free shared buffers cached Mem: 474 457 16 0 0 236 -/+ buffers/cache: 221 253 Swap: 1023 404 619 2) memory flushing in a file server 2.1) brief summary The number of major faults from 50 to 3 during 10% cache hot reads. That means this patch successfully stops major faults when the active file list is slowly scanned when there are partially cache hot streaming IO. 2.2) test scenario Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the pages will be activated: for i in `seq 0 100 10000000`; do echo $i 110; done > pattern-hot-10 iotrace.rb --load pattern-hot-10 --play /b/sparse vmmon nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree and monitor /proc/vmstat during the time. The test box has 2G memory. I carried out tests on fresh booted console as well as X desktop, and fetched the vmstat numbers on (1) begin: shortly after the big read IO starts; (2) end: just before the big read IO stops; (3) restore: the big read IO stops and the zsh working set restored (4) restore X: after IO, switch back and forth between the urxvt and firefox windows to restore their working set. 2.3) console mode results nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.29 VM_EXEC protection ON: begin: 2481 2237 8694 630 0 574299 end: 275 231976 233914 633 776271 20933042 restore: 370 232154 234524 691 777183 20958453 2.6.29 VM_EXEC protection ON (second run): begin: 2434 2237 8493 629 0 574195 end: 284 231970 233536 632 771918 20896129 restore: 399 232218 234789 690 774526 20957909 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 2479 2344 9659 210 0 579643 end: 284 232010 234142 260 772776 20917184 restore: 379 232159 234371 301 774888 20967849 The above console numbers show that - The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29. I'd attribute that improvement to the mmap readahead improvements :-) - The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50. That's a huge improvement - which means with the VM_EXEC protection logic, active mmap pages is pretty safe even under partially cache hot streaming IO. - when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8 under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree) That roughly means the active mmap pages get 20.8 more chances to get re-referenced to stay in memory. - The absolute nr_mapped drops considerably to 1/9 during the big IO, and the dropped pages are mostly inactive ones. The patch has almost no impact in this aspect, that means it won't unnecessarily increase memory pressure. (In contrast, your 20% mmap protection ratio will keep them all, and therefore eliminate the extra 41 major faults to restore working set of zsh etc.) The iotrace.rb read throughput is 151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse which means the inactive list is rotated at the speed of 250MB/s, so a full scan of which takes about 3.5 seconds, while a full scan of active file list takes about 77 seconds. 2.4) X mode results We can reach roughly the same conclusions for X desktop: nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.30-rc4-mm VM_EXEC protection ON: begin: 9740 8920 64075 561 0 678360 end: 768 218254 220029 565 798953 21057006 restore: 857 218543 220987 606 799462 21075710 restore X: 2414 218560 225344 797 799462 21080795 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 9368 5035 26389 554 0 633391 end: 770 218449 221230 661 646472 17832500 restore: 1113 218466 220978 710 649881 17905235 restore X: 2687 218650 225484 947 802700 21083584 - the absolute nr_mapped drops considerably (to 1/13 of the original size) during the streaming IO. - the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393 during the whole process. Cc: Elladan <elladan@eskimo.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:12 +07:00
list_add(&page->lru, &l_active);
continue;
}
}
ClearPageActive(page); /* we are de-activating */
list_add(&page->lru, &l_inactive);
}
/*
vmscan: make mapped executable pages the first class citizen Protect referenced PROT_EXEC mapped pages from being deactivated. PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some currently running executables and their linked libraries, they shall really be cached aggressively to provide good user experiences. Thanks to Johannes Weiner for the advice to reuse the VMA walk in page_referenced() to get the PROT_EXEC bit. [more details] ( The consequences of this patch will have to be discussed together with Rik van Riel's recent patch "vmscan: evict use-once pages first". ) ( Some of the good points and insights are taken into this changelog. Thanks to all the involved people for the great LKML discussions. ) the problem =========== For a typical desktop, the most precious working set is composed of *actively accessed* (1) memory mapped executables (2) and their anonymous pages (3) and other files (4) and the dcache/icache/.. slabs while the least important data are (5) infrequently used or use-once files For a typical desktop, one major problem is busty and large amount of (5) use-once files flushing out the working set. Inside the working set, (4) dcache/icache have already been too sticky ;-) So we only have to care (2) anonymous and (1)(3) file pages. anonymous pages =============== Anonymous pages are effectively immune to the streaming IO attack, because we now have separate file/anon LRU lists. When the use-once files crowd into the file LRU, the list's "quality" is significantly lowered. Therefore the scan balance policy in get_scan_ratio() will choose to scan the (low quality) file LRU much more frequently than the anon LRU. file pages ========== Rik proposed to *not* scan the active file LRU when the inactive list grows larger than active list. This guarantees that when there are use-once streaming IO, and the working set is not too large(so that active_size < inactive_size), the active file LRU will *not* be scanned at all. So the not-too-large working set can be well protected. But there are also situations where the file working set is a bit large so that (active_size >= inactive_size), or the streaming IOs are not purely use-once. In these cases, the active list will be scanned slowly. Because the current shrink_active_list() policy is to deactivate active pages regardless of their referenced bits. The deactivated pages become susceptible to the streaming IO attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that the deactivated pages don't have enough time to get re-referenced. Because a user tend to switch between windows in intervals from seconds to minutes. This patch holds mapped executable pages in the active list as long as they are referenced during each full scan of the active list. Because the active list is normally scanned much slower, they get longer grace time (eg. 100s) for further references, which better matches the pace of user operations. Therefore this patch greatly prolongs the in-cache time of executable code, when there are moderate memory pressures. before patch: guaranteed to be cached if reference intervals < I after patch: guaranteed to be cached if reference intervals < I+A (except when randomly reclaimed by the lumpy reclaim) where A = time to fully scan the active file LRU I = time to fully scan the inactive file LRU Note that normally A >> I. side effects ============ This patch is safe in general, it restores the pre-2.6.28 mmap() behavior but in a much smaller and well targeted scope. One may worry about some one to abuse the PROT_EXEC heuristic. But as Andrew Morton stated, there are other tricks to getting that sort of boost. Another concern is the PROT_EXEC mapped pages growing large in rare cases, and therefore hurting reclaim efficiency. But a sane application targeted for large audience will never use PROT_EXEC for data mappings. If some home made application tries to abuse that bit, it shall be aware of the consequences. If it is abused to scale of 2/3 total memory, it gains nothing but overheads. benchmarks ========== 1) memory tight desktop 1.1) brief summary - clock time and major faults are reduced by 50%; - pswpin numbers are reduced to ~1/3. That means X desktop responsiveness is doubled under high memory/swap pressure. 1.2) test scenario - nfsroot gnome desktop with 512M physical memory - run some programs, and switch between the existing windows after starting each new program. 1.3) progress timing (seconds) before after programs 0.02 0.02 N xeyes 0.75 0.76 N firefox 2.02 1.88 N nautilus 3.36 3.17 N nautilus --browser 5.26 4.89 N gthumb 7.12 6.47 N gedit 9.22 8.16 N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf 13.58 12.55 N xterm 15.87 14.57 N mlterm 18.63 17.06 N gnome-terminal 21.16 18.90 N urxvt 26.24 23.48 N gnome-system-monitor 28.72 26.52 N gnome-help 32.15 29.65 N gnome-dictionary 39.66 36.12 N /usr/games/sol 43.16 39.27 N /usr/games/gnometris 48.65 42.56 N /usr/games/gnect 53.31 47.03 N /usr/games/gtali 58.60 52.05 N /usr/games/iagno 65.77 55.42 N /usr/games/gnotravex 70.76 61.47 N /usr/games/mahjongg 76.15 67.11 N /usr/games/gnome-sudoku 86.32 75.15 N /usr/games/glines 92.21 79.70 N /usr/games/glchess 103.79 88.48 N /usr/games/gnomine 113.84 96.51 N /usr/games/gnotski 124.40 102.19 N /usr/games/gnibbles 137.41 114.93 N /usr/games/gnobots2 155.53 125.02 N /usr/games/blackjack 179.85 135.11 N /usr/games/same-gnome 224.49 154.50 N /usr/bin/gnome-window-properties 248.44 162.09 N /usr/bin/gnome-default-applications-properties 282.62 173.29 N /usr/bin/gnome-at-properties 323.72 188.21 N /usr/bin/gnome-typing-monitor 363.99 199.93 N /usr/bin/gnome-at-visual 394.21 206.95 N /usr/bin/gnome-sound-properties 435.14 224.49 N /usr/bin/gnome-at-mobility 463.05 234.11 N /usr/bin/gnome-keybinding-properties 503.75 248.59 N /usr/bin/gnome-about-me 554.00 276.27 N /usr/bin/gnome-display-properties 615.48 304.39 N /usr/bin/gnome-network-preferences 693.03 342.01 N /usr/bin/gnome-mouse-properties 759.90 388.58 N /usr/bin/gnome-appearance-properties 937.90 508.47 N /usr/bin/gnome-control-center 1109.75 587.57 N /usr/bin/gnome-keyboard-properties 1399.05 758.16 N : oocalc 1524.64 830.03 N : oodraw 1684.31 900.03 N : ooimpress 1874.04 993.91 N : oomath 2115.12 1081.89 N : ooweb 2369.02 1161.99 N : oowriter Note that the last ": oo*" commands are actually commented out. 1.4) vmstat numbers (some relevant ones are marked with *) before after nr_free_pages 1293 3898 nr_inactive_anon 59956 53460 nr_active_anon 26815 30026 nr_inactive_file 2657 3218 nr_active_file 2019 2806 nr_unevictable 4 4 nr_mlock 4 4 nr_anon_pages 26706 27859 *nr_mapped 3542 4469 nr_file_pages 72232 67681 nr_dirty 1 0 nr_writeback 123 19 nr_slab_reclaimable 3375 3534 nr_slab_unreclaimable 11405 10665 nr_page_table_pages 8106 7864 nr_unstable 0 0 nr_bounce 0 0 *nr_vmscan_write 394776 230839 nr_writeback_temp 0 0 numa_hit 6843353 3318676 numa_miss 0 0 numa_foreign 0 0 numa_interleave 1719 1719 numa_local 6843353 3318676 numa_other 0 0 *pgpgin 5954683 2057175 *pgpgout 1578276 922744 *pswpin 1486615 512238 *pswpout 394568 230685 pgalloc_dma 277432 56602 pgalloc_dma32 6769477 3310348 pgalloc_normal 0 0 pgalloc_movable 0 0 pgfree 7048396 3371118 pgactivate 2036343 1471492 pgdeactivate 2189691 1612829 pgfault 3702176 3100702 *pgmajfault 452116 201343 pgrefill_dma 12185 7127 pgrefill_dma32 334384 653703 pgrefill_normal 0 0 pgrefill_movable 0 0 pgsteal_dma 74214 22179 pgsteal_dma32 3334164 1638029 pgsteal_normal 0 0 pgsteal_movable 0 0 pgscan_kswapd_dma 1081421 1216199 pgscan_kswapd_dma32 58979118 46002810 pgscan_kswapd_normal 0 0 pgscan_kswapd_movable 0 0 pgscan_direct_dma 2015438 1086109 pgscan_direct_dma32 55787823 36101597 pgscan_direct_normal 0 0 pgscan_direct_movable 0 0 pginodesteal 3461 7281 slabs_scanned 564864 527616 kswapd_steal 2889797 1448082 kswapd_inodesteal 14827 14835 pageoutrun 43459 21562 allocstall 9653 4032 pgrotated 384216 228631 1.5) free numbers at the end of the tests before patch: total used free shared buffers cached Mem: 474 467 7 0 0 236 -/+ buffers/cache: 230 243 Swap: 1023 418 605 after patch: total used free shared buffers cached Mem: 474 457 16 0 0 236 -/+ buffers/cache: 221 253 Swap: 1023 404 619 2) memory flushing in a file server 2.1) brief summary The number of major faults from 50 to 3 during 10% cache hot reads. That means this patch successfully stops major faults when the active file list is slowly scanned when there are partially cache hot streaming IO. 2.2) test scenario Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the pages will be activated: for i in `seq 0 100 10000000`; do echo $i 110; done > pattern-hot-10 iotrace.rb --load pattern-hot-10 --play /b/sparse vmmon nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree and monitor /proc/vmstat during the time. The test box has 2G memory. I carried out tests on fresh booted console as well as X desktop, and fetched the vmstat numbers on (1) begin: shortly after the big read IO starts; (2) end: just before the big read IO stops; (3) restore: the big read IO stops and the zsh working set restored (4) restore X: after IO, switch back and forth between the urxvt and firefox windows to restore their working set. 2.3) console mode results nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.29 VM_EXEC protection ON: begin: 2481 2237 8694 630 0 574299 end: 275 231976 233914 633 776271 20933042 restore: 370 232154 234524 691 777183 20958453 2.6.29 VM_EXEC protection ON (second run): begin: 2434 2237 8493 629 0 574195 end: 284 231970 233536 632 771918 20896129 restore: 399 232218 234789 690 774526 20957909 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 2479 2344 9659 210 0 579643 end: 284 232010 234142 260 772776 20917184 restore: 379 232159 234371 301 774888 20967849 The above console numbers show that - The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29. I'd attribute that improvement to the mmap readahead improvements :-) - The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50. That's a huge improvement - which means with the VM_EXEC protection logic, active mmap pages is pretty safe even under partially cache hot streaming IO. - when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8 under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree) That roughly means the active mmap pages get 20.8 more chances to get re-referenced to stay in memory. - The absolute nr_mapped drops considerably to 1/9 during the big IO, and the dropped pages are mostly inactive ones. The patch has almost no impact in this aspect, that means it won't unnecessarily increase memory pressure. (In contrast, your 20% mmap protection ratio will keep them all, and therefore eliminate the extra 41 major faults to restore working set of zsh etc.) The iotrace.rb read throughput is 151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse which means the inactive list is rotated at the speed of 250MB/s, so a full scan of which takes about 3.5 seconds, while a full scan of active file list takes about 77 seconds. 2.4) X mode results We can reach roughly the same conclusions for X desktop: nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.30-rc4-mm VM_EXEC protection ON: begin: 9740 8920 64075 561 0 678360 end: 768 218254 220029 565 798953 21057006 restore: 857 218543 220987 606 799462 21075710 restore X: 2414 218560 225344 797 799462 21080795 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 9368 5035 26389 554 0 633391 end: 770 218449 221230 661 646472 17832500 restore: 1113 218466 220978 710 649881 17905235 restore X: 2687 218650 225484 947 802700 21083584 - the absolute nr_mapped drops considerably (to 1/13 of the original size) during the streaming IO. - the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393 during the whole process. Cc: Elladan <elladan@eskimo.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:12 +07:00
* Move pages back to the lru list.
*/
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_lock_irq(&pgdat->lru_lock);
/*
vmscan: make mapped executable pages the first class citizen Protect referenced PROT_EXEC mapped pages from being deactivated. PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some currently running executables and their linked libraries, they shall really be cached aggressively to provide good user experiences. Thanks to Johannes Weiner for the advice to reuse the VMA walk in page_referenced() to get the PROT_EXEC bit. [more details] ( The consequences of this patch will have to be discussed together with Rik van Riel's recent patch "vmscan: evict use-once pages first". ) ( Some of the good points and insights are taken into this changelog. Thanks to all the involved people for the great LKML discussions. ) the problem =========== For a typical desktop, the most precious working set is composed of *actively accessed* (1) memory mapped executables (2) and their anonymous pages (3) and other files (4) and the dcache/icache/.. slabs while the least important data are (5) infrequently used or use-once files For a typical desktop, one major problem is busty and large amount of (5) use-once files flushing out the working set. Inside the working set, (4) dcache/icache have already been too sticky ;-) So we only have to care (2) anonymous and (1)(3) file pages. anonymous pages =============== Anonymous pages are effectively immune to the streaming IO attack, because we now have separate file/anon LRU lists. When the use-once files crowd into the file LRU, the list's "quality" is significantly lowered. Therefore the scan balance policy in get_scan_ratio() will choose to scan the (low quality) file LRU much more frequently than the anon LRU. file pages ========== Rik proposed to *not* scan the active file LRU when the inactive list grows larger than active list. This guarantees that when there are use-once streaming IO, and the working set is not too large(so that active_size < inactive_size), the active file LRU will *not* be scanned at all. So the not-too-large working set can be well protected. But there are also situations where the file working set is a bit large so that (active_size >= inactive_size), or the streaming IOs are not purely use-once. In these cases, the active list will be scanned slowly. Because the current shrink_active_list() policy is to deactivate active pages regardless of their referenced bits. The deactivated pages become susceptible to the streaming IO attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that the deactivated pages don't have enough time to get re-referenced. Because a user tend to switch between windows in intervals from seconds to minutes. This patch holds mapped executable pages in the active list as long as they are referenced during each full scan of the active list. Because the active list is normally scanned much slower, they get longer grace time (eg. 100s) for further references, which better matches the pace of user operations. Therefore this patch greatly prolongs the in-cache time of executable code, when there are moderate memory pressures. before patch: guaranteed to be cached if reference intervals < I after patch: guaranteed to be cached if reference intervals < I+A (except when randomly reclaimed by the lumpy reclaim) where A = time to fully scan the active file LRU I = time to fully scan the inactive file LRU Note that normally A >> I. side effects ============ This patch is safe in general, it restores the pre-2.6.28 mmap() behavior but in a much smaller and well targeted scope. One may worry about some one to abuse the PROT_EXEC heuristic. But as Andrew Morton stated, there are other tricks to getting that sort of boost. Another concern is the PROT_EXEC mapped pages growing large in rare cases, and therefore hurting reclaim efficiency. But a sane application targeted for large audience will never use PROT_EXEC for data mappings. If some home made application tries to abuse that bit, it shall be aware of the consequences. If it is abused to scale of 2/3 total memory, it gains nothing but overheads. benchmarks ========== 1) memory tight desktop 1.1) brief summary - clock time and major faults are reduced by 50%; - pswpin numbers are reduced to ~1/3. That means X desktop responsiveness is doubled under high memory/swap pressure. 1.2) test scenario - nfsroot gnome desktop with 512M physical memory - run some programs, and switch between the existing windows after starting each new program. 1.3) progress timing (seconds) before after programs 0.02 0.02 N xeyes 0.75 0.76 N firefox 2.02 1.88 N nautilus 3.36 3.17 N nautilus --browser 5.26 4.89 N gthumb 7.12 6.47 N gedit 9.22 8.16 N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf 13.58 12.55 N xterm 15.87 14.57 N mlterm 18.63 17.06 N gnome-terminal 21.16 18.90 N urxvt 26.24 23.48 N gnome-system-monitor 28.72 26.52 N gnome-help 32.15 29.65 N gnome-dictionary 39.66 36.12 N /usr/games/sol 43.16 39.27 N /usr/games/gnometris 48.65 42.56 N /usr/games/gnect 53.31 47.03 N /usr/games/gtali 58.60 52.05 N /usr/games/iagno 65.77 55.42 N /usr/games/gnotravex 70.76 61.47 N /usr/games/mahjongg 76.15 67.11 N /usr/games/gnome-sudoku 86.32 75.15 N /usr/games/glines 92.21 79.70 N /usr/games/glchess 103.79 88.48 N /usr/games/gnomine 113.84 96.51 N /usr/games/gnotski 124.40 102.19 N /usr/games/gnibbles 137.41 114.93 N /usr/games/gnobots2 155.53 125.02 N /usr/games/blackjack 179.85 135.11 N /usr/games/same-gnome 224.49 154.50 N /usr/bin/gnome-window-properties 248.44 162.09 N /usr/bin/gnome-default-applications-properties 282.62 173.29 N /usr/bin/gnome-at-properties 323.72 188.21 N /usr/bin/gnome-typing-monitor 363.99 199.93 N /usr/bin/gnome-at-visual 394.21 206.95 N /usr/bin/gnome-sound-properties 435.14 224.49 N /usr/bin/gnome-at-mobility 463.05 234.11 N /usr/bin/gnome-keybinding-properties 503.75 248.59 N /usr/bin/gnome-about-me 554.00 276.27 N /usr/bin/gnome-display-properties 615.48 304.39 N /usr/bin/gnome-network-preferences 693.03 342.01 N /usr/bin/gnome-mouse-properties 759.90 388.58 N /usr/bin/gnome-appearance-properties 937.90 508.47 N /usr/bin/gnome-control-center 1109.75 587.57 N /usr/bin/gnome-keyboard-properties 1399.05 758.16 N : oocalc 1524.64 830.03 N : oodraw 1684.31 900.03 N : ooimpress 1874.04 993.91 N : oomath 2115.12 1081.89 N : ooweb 2369.02 1161.99 N : oowriter Note that the last ": oo*" commands are actually commented out. 1.4) vmstat numbers (some relevant ones are marked with *) before after nr_free_pages 1293 3898 nr_inactive_anon 59956 53460 nr_active_anon 26815 30026 nr_inactive_file 2657 3218 nr_active_file 2019 2806 nr_unevictable 4 4 nr_mlock 4 4 nr_anon_pages 26706 27859 *nr_mapped 3542 4469 nr_file_pages 72232 67681 nr_dirty 1 0 nr_writeback 123 19 nr_slab_reclaimable 3375 3534 nr_slab_unreclaimable 11405 10665 nr_page_table_pages 8106 7864 nr_unstable 0 0 nr_bounce 0 0 *nr_vmscan_write 394776 230839 nr_writeback_temp 0 0 numa_hit 6843353 3318676 numa_miss 0 0 numa_foreign 0 0 numa_interleave 1719 1719 numa_local 6843353 3318676 numa_other 0 0 *pgpgin 5954683 2057175 *pgpgout 1578276 922744 *pswpin 1486615 512238 *pswpout 394568 230685 pgalloc_dma 277432 56602 pgalloc_dma32 6769477 3310348 pgalloc_normal 0 0 pgalloc_movable 0 0 pgfree 7048396 3371118 pgactivate 2036343 1471492 pgdeactivate 2189691 1612829 pgfault 3702176 3100702 *pgmajfault 452116 201343 pgrefill_dma 12185 7127 pgrefill_dma32 334384 653703 pgrefill_normal 0 0 pgrefill_movable 0 0 pgsteal_dma 74214 22179 pgsteal_dma32 3334164 1638029 pgsteal_normal 0 0 pgsteal_movable 0 0 pgscan_kswapd_dma 1081421 1216199 pgscan_kswapd_dma32 58979118 46002810 pgscan_kswapd_normal 0 0 pgscan_kswapd_movable 0 0 pgscan_direct_dma 2015438 1086109 pgscan_direct_dma32 55787823 36101597 pgscan_direct_normal 0 0 pgscan_direct_movable 0 0 pginodesteal 3461 7281 slabs_scanned 564864 527616 kswapd_steal 2889797 1448082 kswapd_inodesteal 14827 14835 pageoutrun 43459 21562 allocstall 9653 4032 pgrotated 384216 228631 1.5) free numbers at the end of the tests before patch: total used free shared buffers cached Mem: 474 467 7 0 0 236 -/+ buffers/cache: 230 243 Swap: 1023 418 605 after patch: total used free shared buffers cached Mem: 474 457 16 0 0 236 -/+ buffers/cache: 221 253 Swap: 1023 404 619 2) memory flushing in a file server 2.1) brief summary The number of major faults from 50 to 3 during 10% cache hot reads. That means this patch successfully stops major faults when the active file list is slowly scanned when there are partially cache hot streaming IO. 2.2) test scenario Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the pages will be activated: for i in `seq 0 100 10000000`; do echo $i 110; done > pattern-hot-10 iotrace.rb --load pattern-hot-10 --play /b/sparse vmmon nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree and monitor /proc/vmstat during the time. The test box has 2G memory. I carried out tests on fresh booted console as well as X desktop, and fetched the vmstat numbers on (1) begin: shortly after the big read IO starts; (2) end: just before the big read IO stops; (3) restore: the big read IO stops and the zsh working set restored (4) restore X: after IO, switch back and forth between the urxvt and firefox windows to restore their working set. 2.3) console mode results nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.29 VM_EXEC protection ON: begin: 2481 2237 8694 630 0 574299 end: 275 231976 233914 633 776271 20933042 restore: 370 232154 234524 691 777183 20958453 2.6.29 VM_EXEC protection ON (second run): begin: 2434 2237 8493 629 0 574195 end: 284 231970 233536 632 771918 20896129 restore: 399 232218 234789 690 774526 20957909 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 2479 2344 9659 210 0 579643 end: 284 232010 234142 260 772776 20917184 restore: 379 232159 234371 301 774888 20967849 The above console numbers show that - The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29. I'd attribute that improvement to the mmap readahead improvements :-) - The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50. That's a huge improvement - which means with the VM_EXEC protection logic, active mmap pages is pretty safe even under partially cache hot streaming IO. - when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8 under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree) That roughly means the active mmap pages get 20.8 more chances to get re-referenced to stay in memory. - The absolute nr_mapped drops considerably to 1/9 during the big IO, and the dropped pages are mostly inactive ones. The patch has almost no impact in this aspect, that means it won't unnecessarily increase memory pressure. (In contrast, your 20% mmap protection ratio will keep them all, and therefore eliminate the extra 41 major faults to restore working set of zsh etc.) The iotrace.rb read throughput is 151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse which means the inactive list is rotated at the speed of 250MB/s, so a full scan of which takes about 3.5 seconds, while a full scan of active file list takes about 77 seconds. 2.4) X mode results We can reach roughly the same conclusions for X desktop: nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.30-rc4-mm VM_EXEC protection ON: begin: 9740 8920 64075 561 0 678360 end: 768 218254 220029 565 798953 21057006 restore: 857 218543 220987 606 799462 21075710 restore X: 2414 218560 225344 797 799462 21080795 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 9368 5035 26389 554 0 633391 end: 770 218449 221230 661 646472 17832500 restore: 1113 218466 220978 710 649881 17905235 restore X: 2687 218650 225484 947 802700 21083584 - the absolute nr_mapped drops considerably (to 1/13 of the original size) during the streaming IO. - the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393 during the whole process. Cc: Elladan <elladan@eskimo.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:12 +07:00
* Count referenced pages from currently used mappings as rotated,
* even though only some of them are actually re-activated. This
* helps balance scan pressure between file and anonymous pages in
* get_scan_count.
*/
reclaim_stat->recent_rotated[file] += nr_rotated;
move_active_pages_to_lru(lruvec, &l_active, &l_hold, lru);
move_active_pages_to_lru(lruvec, &l_inactive, &l_hold, lru - LRU_ACTIVE);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
__mod_node_page_state(pgdat, NR_ISOLATED_ANON + file, -nr_taken);
spin_unlock_irq(&pgdat->lru_lock);
mm: take pagevecs off reclaim stack Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru() by lists of pages_to_free: then apply Konstantin Khlebnikov's free_hot_cold_page_list() to them instead of pagevec_release(). Which simplifies the flow (no need to drop and retake lock whenever pagevec fills up) and reduces stale addresses in stack backtraces (which often showed through the pagevecs); but more importantly, removes another 120 bytes from the deepest stacks in page reclaim. Although I've not recently seen an actual stack overflow here with a vanilla kernel, move_active_pages_to_lru() has often featured in deep backtraces. However, free_hot_cold_page_list() does not handle compound pages (nor need it: a Transparent HugePage would have been split by the time it reaches the call in shrink_page_list()), but it is possible for putback_lru_pages() or move_active_pages_to_lru() to be left holding the last reference on a THP, so must exclude the unlikely compound case before putting on pages_to_free. Remove pagevec_strip(), its work now done in move_active_pages_to_lru(). The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c, but that is never on the reclaim path, and cannot be replaced by a list. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:56 +07:00
mem_cgroup_uncharge_list(&l_hold);
free_hot_cold_page_list(&l_hold, true);
}
/*
* The inactive anon list should be small enough that the VM never has
* to do too much work.
*
* The inactive file list should be small enough to leave most memory
* to the established workingset on the scan-resistant active list,
* but large enough to avoid thrashing the aggregate readahead window.
*
* Both inactive lists should also be large enough that each inactive
* page has a chance to be referenced again before it is reclaimed.
*
* The inactive_ratio is the target ratio of ACTIVE to INACTIVE pages
* on this LRU, maintained by the pageout code. A zone->inactive_ratio
* of 3 means 3:1 or 25% of the pages are kept on the inactive list.
*
* total target max
* memory ratio inactive
* -------------------------------------
* 10MB 1 5MB
* 100MB 1 50MB
* 1GB 3 250MB
* 10GB 10 0.9GB
* 100GB 31 3GB
* 1TB 101 10GB
* 10TB 320 32GB
*/
mm: consider whether to decivate based on eligible zones inactive ratio Minchan Kim reported that with per-zone lru state it was possible to identify that a normal zone with 8^M anonymous pages could trigger OOM with non-atomic order-0 allocations as all pages in the zone were in the active list. gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0 Call Trace: __alloc_pages_nodemask+0xe52/0xe60 ? new_slab+0x39c/0x3b0 new_slab+0x39c/0x3b0 ___slab_alloc.constprop.87+0x6da/0x840 ? __alloc_skb+0x3c/0x260 ? enqueue_task_fair+0x73/0xbf0 ? poll_select_copy_remaining+0x140/0x140 __slab_alloc.isra.81.constprop.86+0x40/0x6d ? __alloc_skb+0x3c/0x260 kmem_cache_alloc+0x22c/0x260 ? __alloc_skb+0x3c/0x260 __alloc_skb+0x3c/0x260 alloc_skb_with_frags+0x4e/0x1a0 sock_alloc_send_pskb+0x16a/0x1b0 ? wait_for_unix_gc+0x31/0x90 unix_stream_sendmsg+0x28d/0x340 sock_sendmsg+0x2d/0x40 sock_write_iter+0x6c/0xc0 __vfs_write+0xc0/0x120 vfs_write+0x9b/0x1a0 ? __might_fault+0x49/0xa0 SyS_write+0x44/0x90 do_fast_syscall_32+0xa6/0x1e0 Mem-Info: active_anon:101103 inactive_anon:102219 isolated_anon:0 active_file:503 inactive_file:544 isolated_file:0 unevictable:0 dirty:0 writeback:34 unstable:0 slab_reclaimable:6298 slab_unreclaimable:74669 mapped:863 shmem:0 pagetables:100998 bounce:0 free:23573 free_pcp:1861 free_cma:0 Node 0 active_anon:404412kB inactive_anon:409040kB active_file:2012kB inactive_file:2176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:3452kB dirty:0kB writeback:136kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1320845 all_unreclaimable? yes DMA free:3296kB min:68kB low:84kB high:100kB active_anon:5540kB inactive_anon:0kB active_file:0kB inactive_file:0kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:248kB slab_unreclaimable:2628kB kernel_stack:792kB pagetables:2316kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 809 1965 1965 Normal free:3600kB min:3604kB low:4504kB high:5404kB active_anon:86304kB inactive_anon:0kB active_file:160kB inactive_file:376kB present:897016kB managed:858524kB mlocked:0kB slab_reclaimable:24944kB slab_unreclaimable:296048kB kernel_stack:163832kB pagetables:35892kB bounce:0kB free_pcp:3076kB local_pcp:656kB free_cma:0kB lowmem_reserve[]: 0 0 9247 9247 HighMem free:86156kB min:512kB low:1796kB high:3080kB active_anon:312852kB inactive_anon:410024kB active_file:1924kB inactive_file:2012kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:365784kB bounce:0kB free_pcp:3868kB local_pcp:720kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 8*4kB (UM) 8*8kB (UM) 4*16kB (M) 2*32kB (UM) 2*64kB (UM) 1*128kB (M) 3*256kB (UME) 2*512kB (UE) 1*1024kB (E) 0*2048kB 0*4096kB = 3296kB Normal: 240*4kB (UME) 160*8kB (UME) 23*16kB (ME) 3*32kB (UE) 3*64kB (UME) 2*128kB (ME) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3408kB HighMem: 10942*4kB (UM) 3102*8kB (UM) 866*16kB (UM) 76*32kB (UM) 11*64kB (UM) 4*128kB (UM) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 86344kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB 54409 total pagecache pages 53215 pages in swap cache Swap cache stats: add 300982, delete 247765, find 157978/226539 Free swap = 3803244kB Total swap = 4192252kB 524186 pages RAM 295934 pages HighMem/MovableOnly 9642 pages reserved 0 pages cma reserved The problem is due to the active deactivation logic in inactive_list_is_low: Node 0 active_anon:404412kB inactive_anon:409040kB IOW, (inactive_anon of node * inactive_ratio > active_anon of node) due to highmem anonymous stat so VM never deactivates normal zone's anonymous pages. This patch is a modified version of Minchan's original solution but based upon it. The problem with Minchan's patch is that any low zone with an imbalanced list could force a rotation. In this patch, a zone-constrained global reclaim will rotate the list if the inactive/active ratio of all eligible zones needs to be corrected. It is possible that higher zone pages will be initially rotated prematurely but this is the safer choice to maintain overall LRU age. Link: http://lkml.kernel.org/r/20160722090929.GJ10438@techsingularity.net Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:47:34 +07:00
static bool inactive_list_is_low(struct lruvec *lruvec, bool file,
struct scan_control *sc)
{
unsigned long inactive_ratio;
unsigned long inactive;
unsigned long active;
unsigned long gb;
mm: consider whether to decivate based on eligible zones inactive ratio Minchan Kim reported that with per-zone lru state it was possible to identify that a normal zone with 8^M anonymous pages could trigger OOM with non-atomic order-0 allocations as all pages in the zone were in the active list. gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0 Call Trace: __alloc_pages_nodemask+0xe52/0xe60 ? new_slab+0x39c/0x3b0 new_slab+0x39c/0x3b0 ___slab_alloc.constprop.87+0x6da/0x840 ? __alloc_skb+0x3c/0x260 ? enqueue_task_fair+0x73/0xbf0 ? poll_select_copy_remaining+0x140/0x140 __slab_alloc.isra.81.constprop.86+0x40/0x6d ? __alloc_skb+0x3c/0x260 kmem_cache_alloc+0x22c/0x260 ? __alloc_skb+0x3c/0x260 __alloc_skb+0x3c/0x260 alloc_skb_with_frags+0x4e/0x1a0 sock_alloc_send_pskb+0x16a/0x1b0 ? wait_for_unix_gc+0x31/0x90 unix_stream_sendmsg+0x28d/0x340 sock_sendmsg+0x2d/0x40 sock_write_iter+0x6c/0xc0 __vfs_write+0xc0/0x120 vfs_write+0x9b/0x1a0 ? __might_fault+0x49/0xa0 SyS_write+0x44/0x90 do_fast_syscall_32+0xa6/0x1e0 Mem-Info: active_anon:101103 inactive_anon:102219 isolated_anon:0 active_file:503 inactive_file:544 isolated_file:0 unevictable:0 dirty:0 writeback:34 unstable:0 slab_reclaimable:6298 slab_unreclaimable:74669 mapped:863 shmem:0 pagetables:100998 bounce:0 free:23573 free_pcp:1861 free_cma:0 Node 0 active_anon:404412kB inactive_anon:409040kB active_file:2012kB inactive_file:2176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:3452kB dirty:0kB writeback:136kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1320845 all_unreclaimable? yes DMA free:3296kB min:68kB low:84kB high:100kB active_anon:5540kB inactive_anon:0kB active_file:0kB inactive_file:0kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:248kB slab_unreclaimable:2628kB kernel_stack:792kB pagetables:2316kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 809 1965 1965 Normal free:3600kB min:3604kB low:4504kB high:5404kB active_anon:86304kB inactive_anon:0kB active_file:160kB inactive_file:376kB present:897016kB managed:858524kB mlocked:0kB slab_reclaimable:24944kB slab_unreclaimable:296048kB kernel_stack:163832kB pagetables:35892kB bounce:0kB free_pcp:3076kB local_pcp:656kB free_cma:0kB lowmem_reserve[]: 0 0 9247 9247 HighMem free:86156kB min:512kB low:1796kB high:3080kB active_anon:312852kB inactive_anon:410024kB active_file:1924kB inactive_file:2012kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:365784kB bounce:0kB free_pcp:3868kB local_pcp:720kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 8*4kB (UM) 8*8kB (UM) 4*16kB (M) 2*32kB (UM) 2*64kB (UM) 1*128kB (M) 3*256kB (UME) 2*512kB (UE) 1*1024kB (E) 0*2048kB 0*4096kB = 3296kB Normal: 240*4kB (UME) 160*8kB (UME) 23*16kB (ME) 3*32kB (UE) 3*64kB (UME) 2*128kB (ME) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3408kB HighMem: 10942*4kB (UM) 3102*8kB (UM) 866*16kB (UM) 76*32kB (UM) 11*64kB (UM) 4*128kB (UM) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 86344kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB 54409 total pagecache pages 53215 pages in swap cache Swap cache stats: add 300982, delete 247765, find 157978/226539 Free swap = 3803244kB Total swap = 4192252kB 524186 pages RAM 295934 pages HighMem/MovableOnly 9642 pages reserved 0 pages cma reserved The problem is due to the active deactivation logic in inactive_list_is_low: Node 0 active_anon:404412kB inactive_anon:409040kB IOW, (inactive_anon of node * inactive_ratio > active_anon of node) due to highmem anonymous stat so VM never deactivates normal zone's anonymous pages. This patch is a modified version of Minchan's original solution but based upon it. The problem with Minchan's patch is that any low zone with an imbalanced list could force a rotation. In this patch, a zone-constrained global reclaim will rotate the list if the inactive/active ratio of all eligible zones needs to be corrected. It is possible that higher zone pages will be initially rotated prematurely but this is the safer choice to maintain overall LRU age. Link: http://lkml.kernel.org/r/20160722090929.GJ10438@techsingularity.net Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:47:34 +07:00
struct pglist_data *pgdat = lruvec_pgdat(lruvec);
int zid;
/*
* If we don't have swap space, anonymous page deactivation
* is pointless.
*/
if (!file && !total_swap_pages)
return false;
inactive = lruvec_lru_size(lruvec, file * LRU_FILE);
active = lruvec_lru_size(lruvec, file * LRU_FILE + LRU_ACTIVE);
mm: consider whether to decivate based on eligible zones inactive ratio Minchan Kim reported that with per-zone lru state it was possible to identify that a normal zone with 8^M anonymous pages could trigger OOM with non-atomic order-0 allocations as all pages in the zone were in the active list. gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0 Call Trace: __alloc_pages_nodemask+0xe52/0xe60 ? new_slab+0x39c/0x3b0 new_slab+0x39c/0x3b0 ___slab_alloc.constprop.87+0x6da/0x840 ? __alloc_skb+0x3c/0x260 ? enqueue_task_fair+0x73/0xbf0 ? poll_select_copy_remaining+0x140/0x140 __slab_alloc.isra.81.constprop.86+0x40/0x6d ? __alloc_skb+0x3c/0x260 kmem_cache_alloc+0x22c/0x260 ? __alloc_skb+0x3c/0x260 __alloc_skb+0x3c/0x260 alloc_skb_with_frags+0x4e/0x1a0 sock_alloc_send_pskb+0x16a/0x1b0 ? wait_for_unix_gc+0x31/0x90 unix_stream_sendmsg+0x28d/0x340 sock_sendmsg+0x2d/0x40 sock_write_iter+0x6c/0xc0 __vfs_write+0xc0/0x120 vfs_write+0x9b/0x1a0 ? __might_fault+0x49/0xa0 SyS_write+0x44/0x90 do_fast_syscall_32+0xa6/0x1e0 Mem-Info: active_anon:101103 inactive_anon:102219 isolated_anon:0 active_file:503 inactive_file:544 isolated_file:0 unevictable:0 dirty:0 writeback:34 unstable:0 slab_reclaimable:6298 slab_unreclaimable:74669 mapped:863 shmem:0 pagetables:100998 bounce:0 free:23573 free_pcp:1861 free_cma:0 Node 0 active_anon:404412kB inactive_anon:409040kB active_file:2012kB inactive_file:2176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:3452kB dirty:0kB writeback:136kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1320845 all_unreclaimable? yes DMA free:3296kB min:68kB low:84kB high:100kB active_anon:5540kB inactive_anon:0kB active_file:0kB inactive_file:0kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:248kB slab_unreclaimable:2628kB kernel_stack:792kB pagetables:2316kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 809 1965 1965 Normal free:3600kB min:3604kB low:4504kB high:5404kB active_anon:86304kB inactive_anon:0kB active_file:160kB inactive_file:376kB present:897016kB managed:858524kB mlocked:0kB slab_reclaimable:24944kB slab_unreclaimable:296048kB kernel_stack:163832kB pagetables:35892kB bounce:0kB free_pcp:3076kB local_pcp:656kB free_cma:0kB lowmem_reserve[]: 0 0 9247 9247 HighMem free:86156kB min:512kB low:1796kB high:3080kB active_anon:312852kB inactive_anon:410024kB active_file:1924kB inactive_file:2012kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:365784kB bounce:0kB free_pcp:3868kB local_pcp:720kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 8*4kB (UM) 8*8kB (UM) 4*16kB (M) 2*32kB (UM) 2*64kB (UM) 1*128kB (M) 3*256kB (UME) 2*512kB (UE) 1*1024kB (E) 0*2048kB 0*4096kB = 3296kB Normal: 240*4kB (UME) 160*8kB (UME) 23*16kB (ME) 3*32kB (UE) 3*64kB (UME) 2*128kB (ME) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3408kB HighMem: 10942*4kB (UM) 3102*8kB (UM) 866*16kB (UM) 76*32kB (UM) 11*64kB (UM) 4*128kB (UM) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 86344kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB 54409 total pagecache pages 53215 pages in swap cache Swap cache stats: add 300982, delete 247765, find 157978/226539 Free swap = 3803244kB Total swap = 4192252kB 524186 pages RAM 295934 pages HighMem/MovableOnly 9642 pages reserved 0 pages cma reserved The problem is due to the active deactivation logic in inactive_list_is_low: Node 0 active_anon:404412kB inactive_anon:409040kB IOW, (inactive_anon of node * inactive_ratio > active_anon of node) due to highmem anonymous stat so VM never deactivates normal zone's anonymous pages. This patch is a modified version of Minchan's original solution but based upon it. The problem with Minchan's patch is that any low zone with an imbalanced list could force a rotation. In this patch, a zone-constrained global reclaim will rotate the list if the inactive/active ratio of all eligible zones needs to be corrected. It is possible that higher zone pages will be initially rotated prematurely but this is the safer choice to maintain overall LRU age. Link: http://lkml.kernel.org/r/20160722090929.GJ10438@techsingularity.net Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:47:34 +07:00
/*
* For zone-constrained allocations, it is necessary to check if
* deactivations are required for lowmem to be reclaimed. This
* calculates the inactive/active pages available in eligible zones.
*/
for (zid = sc->reclaim_idx + 1; zid < MAX_NR_ZONES; zid++) {
struct zone *zone = &pgdat->node_zones[zid];
unsigned long inactive_zone, active_zone;
if (!populated_zone(zone))
continue;
inactive_zone = zone_page_state(zone,
NR_ZONE_LRU_BASE + (file * LRU_FILE));
active_zone = zone_page_state(zone,
NR_ZONE_LRU_BASE + (file * LRU_FILE) + LRU_ACTIVE);
inactive -= min(inactive, inactive_zone);
active -= min(active, active_zone);
}
gb = (inactive + active) >> (30 - PAGE_SHIFT);
if (gb)
inactive_ratio = int_sqrt(10 * gb);
else
inactive_ratio = 1;
return inactive * inactive_ratio < active;
}
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
static unsigned long shrink_list(enum lru_list lru, unsigned long nr_to_scan,
struct lruvec *lruvec, struct scan_control *sc)
{
if (is_active_lru(lru)) {
mm: consider whether to decivate based on eligible zones inactive ratio Minchan Kim reported that with per-zone lru state it was possible to identify that a normal zone with 8^M anonymous pages could trigger OOM with non-atomic order-0 allocations as all pages in the zone were in the active list. gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0 Call Trace: __alloc_pages_nodemask+0xe52/0xe60 ? new_slab+0x39c/0x3b0 new_slab+0x39c/0x3b0 ___slab_alloc.constprop.87+0x6da/0x840 ? __alloc_skb+0x3c/0x260 ? enqueue_task_fair+0x73/0xbf0 ? poll_select_copy_remaining+0x140/0x140 __slab_alloc.isra.81.constprop.86+0x40/0x6d ? __alloc_skb+0x3c/0x260 kmem_cache_alloc+0x22c/0x260 ? __alloc_skb+0x3c/0x260 __alloc_skb+0x3c/0x260 alloc_skb_with_frags+0x4e/0x1a0 sock_alloc_send_pskb+0x16a/0x1b0 ? wait_for_unix_gc+0x31/0x90 unix_stream_sendmsg+0x28d/0x340 sock_sendmsg+0x2d/0x40 sock_write_iter+0x6c/0xc0 __vfs_write+0xc0/0x120 vfs_write+0x9b/0x1a0 ? __might_fault+0x49/0xa0 SyS_write+0x44/0x90 do_fast_syscall_32+0xa6/0x1e0 Mem-Info: active_anon:101103 inactive_anon:102219 isolated_anon:0 active_file:503 inactive_file:544 isolated_file:0 unevictable:0 dirty:0 writeback:34 unstable:0 slab_reclaimable:6298 slab_unreclaimable:74669 mapped:863 shmem:0 pagetables:100998 bounce:0 free:23573 free_pcp:1861 free_cma:0 Node 0 active_anon:404412kB inactive_anon:409040kB active_file:2012kB inactive_file:2176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:3452kB dirty:0kB writeback:136kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1320845 all_unreclaimable? yes DMA free:3296kB min:68kB low:84kB high:100kB active_anon:5540kB inactive_anon:0kB active_file:0kB inactive_file:0kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:248kB slab_unreclaimable:2628kB kernel_stack:792kB pagetables:2316kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 809 1965 1965 Normal free:3600kB min:3604kB low:4504kB high:5404kB active_anon:86304kB inactive_anon:0kB active_file:160kB inactive_file:376kB present:897016kB managed:858524kB mlocked:0kB slab_reclaimable:24944kB slab_unreclaimable:296048kB kernel_stack:163832kB pagetables:35892kB bounce:0kB free_pcp:3076kB local_pcp:656kB free_cma:0kB lowmem_reserve[]: 0 0 9247 9247 HighMem free:86156kB min:512kB low:1796kB high:3080kB active_anon:312852kB inactive_anon:410024kB active_file:1924kB inactive_file:2012kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:365784kB bounce:0kB free_pcp:3868kB local_pcp:720kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 8*4kB (UM) 8*8kB (UM) 4*16kB (M) 2*32kB (UM) 2*64kB (UM) 1*128kB (M) 3*256kB (UME) 2*512kB (UE) 1*1024kB (E) 0*2048kB 0*4096kB = 3296kB Normal: 240*4kB (UME) 160*8kB (UME) 23*16kB (ME) 3*32kB (UE) 3*64kB (UME) 2*128kB (ME) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3408kB HighMem: 10942*4kB (UM) 3102*8kB (UM) 866*16kB (UM) 76*32kB (UM) 11*64kB (UM) 4*128kB (UM) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 86344kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB 54409 total pagecache pages 53215 pages in swap cache Swap cache stats: add 300982, delete 247765, find 157978/226539 Free swap = 3803244kB Total swap = 4192252kB 524186 pages RAM 295934 pages HighMem/MovableOnly 9642 pages reserved 0 pages cma reserved The problem is due to the active deactivation logic in inactive_list_is_low: Node 0 active_anon:404412kB inactive_anon:409040kB IOW, (inactive_anon of node * inactive_ratio > active_anon of node) due to highmem anonymous stat so VM never deactivates normal zone's anonymous pages. This patch is a modified version of Minchan's original solution but based upon it. The problem with Minchan's patch is that any low zone with an imbalanced list could force a rotation. In this patch, a zone-constrained global reclaim will rotate the list if the inactive/active ratio of all eligible zones needs to be corrected. It is possible that higher zone pages will be initially rotated prematurely but this is the safer choice to maintain overall LRU age. Link: http://lkml.kernel.org/r/20160722090929.GJ10438@techsingularity.net Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:47:34 +07:00
if (inactive_list_is_low(lruvec, is_file_lru(lru), sc))
shrink_active_list(nr_to_scan, lruvec, sc, lru);
return 0;
}
return shrink_inactive_list(nr_to_scan, lruvec, sc, lru);
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
}
enum scan_balance {
SCAN_EQUAL,
SCAN_FRACT,
SCAN_ANON,
SCAN_FILE,
};
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
/*
* Determine how aggressively the anon and file LRU lists should be
* scanned. The relative value of each set of LRU lists is determined
* by looking at the fraction of the pages scanned we did rotate back
* onto the active list instead of evict.
*
* nr[0] = anon inactive pages to scan; nr[1] = anon active pages to scan
* nr[2] = file inactive pages to scan; nr[3] = file active pages to scan
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
*/
static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
struct scan_control *sc, unsigned long *nr,
unsigned long *lru_pages)
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
{
int swappiness = mem_cgroup_swappiness(memcg);
struct zone_reclaim_stat *reclaim_stat = &lruvec->reclaim_stat;
u64 fraction[2];
u64 denominator = 0; /* gcc */
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
struct pglist_data *pgdat = lruvec_pgdat(lruvec);
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
unsigned long anon_prio, file_prio;
enum scan_balance scan_balance;
unsigned long anon, file;
bool force_scan = false;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
unsigned long ap, fp;
enum lru_list lru;
mm: only force scan in reclaim when none of the LRUs are big enough. Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:06:44 +07:00
bool some_scanned;
int pass;
memcg: fix get_scan_count() for small targets During memory reclaim we determine the number of pages to be scanned per zone as (anon + file) >> priority. Assume scan = (anon + file) >> priority. If scan < SWAP_CLUSTER_MAX, the scan will be skipped for this time and priority gets higher. This has some problems. 1. This increases priority as 1 without any scan. To do scan in this priority, amount of pages should be larger than 512M. If pages>>priority < SWAP_CLUSTER_MAX, it's recorded and scan will be batched, later. (But we lose 1 priority.) If memory size is below 16M, pages >> priority is 0 and no scan in DEF_PRIORITY forever. 2. If zone->all_unreclaimabe==true, it's scanned only when priority==0. So, x86's ZONE_DMA will never be recoverred until the user of pages frees memory by itself. 3. With memcg, the limit of memory can be small. When using small memcg, it gets priority < DEF_PRIORITY-2 very easily and need to call wait_iff_congested(). For doing scan before priorty=9, 64MB of memory should be used. Then, this patch tries to scan SWAP_CLUSTER_MAX of pages in force...when 1. the target is enough small. 2. it's kswapd or memcg reclaim. Then we can avoid rapid priority drop and may be able to recover all_unreclaimable in a small zones. And this patch removes nr_saved_scan. This will allow scanning in this priority even when pages >> priority is very small. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Ying Han <yinghan@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 06:25:34 +07:00
/*
* If the zone or memcg is small, nr[l] can be 0. This
* results in no scanning on this priority and a potential
* priority drop. Global direct reclaim can go to the next
* zone and tends to have no problems. Global kswapd is for
* zone balancing and it needs to scan a minimum amount. When
* reclaiming for a memcg, a priority drop can cause high
* latencies, so it's better to scan a minimum amount there as
* well.
*/
if (current_is_kswapd()) {
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
if (!pgdat_reclaimable(pgdat))
force_scan = true;
if (!mem_cgroup_online(memcg))
force_scan = true;
}
if (!global_reclaim(sc))
force_scan = true;
vmscan: prevent get_scan_ratio() rounding errors get_scan_ratio() calculates percentage and if the percentage is < 1%, it will round percentage down to 0% and cause we completely ignore scanning anon/file pages to reclaim memory even the total anon/file pages are very big. To avoid underflow, we don't use percentage, instead we directly calculate how many pages should be scaned. In this way, we should get several scanned pages for < 1% percent. This has some benefits: 1. increase our calculation precision 2. making our scan more smoothly. Without this, if percent[x] is underflow, shrink_zone() doesn't scan any pages and suddenly it scans all pages when priority is zero. With this, even priority isn't zero, shrink_zone() gets chance to scan some pages. Note, this patch doesn't really change logics, but just increase precision. For system with a lot of memory, this might slightly changes behavior. For example, in a sequential file read workload, without the patch, we don't swap any anon pages. With it, if anon memory size is bigger than 16G, we will see one anon page swapped. The 16G is calculated as PAGE_SIZE * priority(4096) * (fp/ap). fp/ap is assumed to be 1024 which is common in this workload. So the impact sounds not a big deal. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 04:32:36 +07:00
/* If we have no swap space, do not bother scanning anon pages. */
if (!sc->may_swap || mem_cgroup_get_nr_swap_pages(memcg) <= 0) {
scan_balance = SCAN_FILE;
vmscan: prevent get_scan_ratio() rounding errors get_scan_ratio() calculates percentage and if the percentage is < 1%, it will round percentage down to 0% and cause we completely ignore scanning anon/file pages to reclaim memory even the total anon/file pages are very big. To avoid underflow, we don't use percentage, instead we directly calculate how many pages should be scaned. In this way, we should get several scanned pages for < 1% percent. This has some benefits: 1. increase our calculation precision 2. making our scan more smoothly. Without this, if percent[x] is underflow, shrink_zone() doesn't scan any pages and suddenly it scans all pages when priority is zero. With this, even priority isn't zero, shrink_zone() gets chance to scan some pages. Note, this patch doesn't really change logics, but just increase precision. For system with a lot of memory, this might slightly changes behavior. For example, in a sequential file read workload, without the patch, we don't swap any anon pages. With it, if anon memory size is bigger than 16G, we will see one anon page swapped. The 16G is calculated as PAGE_SIZE * priority(4096) * (fp/ap). fp/ap is assumed to be 1024 which is common in this workload. So the impact sounds not a big deal. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 04:32:36 +07:00
goto out;
}
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
/*
* Global reclaim will swap to prevent OOM even with no
* swappiness, but memcg users want to use this knob to
* disable swapping for individual groups completely when
* using the memory controller's swap limit feature would be
* too expensive.
*/
if (!global_reclaim(sc) && !swappiness) {
scan_balance = SCAN_FILE;
goto out;
}
/*
* Do not apply any pressure balancing cleverness when the
* system is close to OOM, scan both anon and file equally
* (unless the swappiness setting disagrees with swapping).
*/
if (!sc->priority && swappiness) {
scan_balance = SCAN_EQUAL;
goto out;
}
/*
* Prevent the reclaimer from falling into the cache trap: as
* cache pages start out inactive, every cache fault will tip
* the scan balance towards the file LRU. And as the file LRU
* shrinks, so does the window for rotation from references.
* This means we have a runaway feedback loop where a tiny
* thrashing file LRU becomes infinitely more attractive than
* anon pages. Try to detect this based on file LRU size.
*/
if (global_reclaim(sc)) {
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
unsigned long pgdatfile;
unsigned long pgdatfree;
int z;
unsigned long total_high_wmark = 0;
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
pgdatfree = sum_zone_node_page_state(pgdat->node_id, NR_FREE_PAGES);
pgdatfile = node_page_state(pgdat, NR_ACTIVE_FILE) +
node_page_state(pgdat, NR_INACTIVE_FILE);
for (z = 0; z < MAX_NR_ZONES; z++) {
struct zone *zone = &pgdat->node_zones[z];
if (!populated_zone(zone))
continue;
total_high_wmark += high_wmark_pages(zone);
}
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
if (unlikely(pgdatfile + pgdatfree <= total_high_wmark)) {
scan_balance = SCAN_ANON;
goto out;
}
}
/*
* If there is enough inactive page cache, i.e. if the size of the
* inactive list is greater than that of the active list *and* the
* inactive list actually has some pages to scan on this priority, we
* do not reclaim anything from the anonymous working set right now.
* Without the second condition we could end up never scanning an
* lruvec even if it has plenty of old anonymous pages unless the
* system is under heavy pressure.
*/
mm: consider whether to decivate based on eligible zones inactive ratio Minchan Kim reported that with per-zone lru state it was possible to identify that a normal zone with 8^M anonymous pages could trigger OOM with non-atomic order-0 allocations as all pages in the zone were in the active list. gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0 Call Trace: __alloc_pages_nodemask+0xe52/0xe60 ? new_slab+0x39c/0x3b0 new_slab+0x39c/0x3b0 ___slab_alloc.constprop.87+0x6da/0x840 ? __alloc_skb+0x3c/0x260 ? enqueue_task_fair+0x73/0xbf0 ? poll_select_copy_remaining+0x140/0x140 __slab_alloc.isra.81.constprop.86+0x40/0x6d ? __alloc_skb+0x3c/0x260 kmem_cache_alloc+0x22c/0x260 ? __alloc_skb+0x3c/0x260 __alloc_skb+0x3c/0x260 alloc_skb_with_frags+0x4e/0x1a0 sock_alloc_send_pskb+0x16a/0x1b0 ? wait_for_unix_gc+0x31/0x90 unix_stream_sendmsg+0x28d/0x340 sock_sendmsg+0x2d/0x40 sock_write_iter+0x6c/0xc0 __vfs_write+0xc0/0x120 vfs_write+0x9b/0x1a0 ? __might_fault+0x49/0xa0 SyS_write+0x44/0x90 do_fast_syscall_32+0xa6/0x1e0 Mem-Info: active_anon:101103 inactive_anon:102219 isolated_anon:0 active_file:503 inactive_file:544 isolated_file:0 unevictable:0 dirty:0 writeback:34 unstable:0 slab_reclaimable:6298 slab_unreclaimable:74669 mapped:863 shmem:0 pagetables:100998 bounce:0 free:23573 free_pcp:1861 free_cma:0 Node 0 active_anon:404412kB inactive_anon:409040kB active_file:2012kB inactive_file:2176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:3452kB dirty:0kB writeback:136kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1320845 all_unreclaimable? yes DMA free:3296kB min:68kB low:84kB high:100kB active_anon:5540kB inactive_anon:0kB active_file:0kB inactive_file:0kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:248kB slab_unreclaimable:2628kB kernel_stack:792kB pagetables:2316kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 809 1965 1965 Normal free:3600kB min:3604kB low:4504kB high:5404kB active_anon:86304kB inactive_anon:0kB active_file:160kB inactive_file:376kB present:897016kB managed:858524kB mlocked:0kB slab_reclaimable:24944kB slab_unreclaimable:296048kB kernel_stack:163832kB pagetables:35892kB bounce:0kB free_pcp:3076kB local_pcp:656kB free_cma:0kB lowmem_reserve[]: 0 0 9247 9247 HighMem free:86156kB min:512kB low:1796kB high:3080kB active_anon:312852kB inactive_anon:410024kB active_file:1924kB inactive_file:2012kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:365784kB bounce:0kB free_pcp:3868kB local_pcp:720kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 8*4kB (UM) 8*8kB (UM) 4*16kB (M) 2*32kB (UM) 2*64kB (UM) 1*128kB (M) 3*256kB (UME) 2*512kB (UE) 1*1024kB (E) 0*2048kB 0*4096kB = 3296kB Normal: 240*4kB (UME) 160*8kB (UME) 23*16kB (ME) 3*32kB (UE) 3*64kB (UME) 2*128kB (ME) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3408kB HighMem: 10942*4kB (UM) 3102*8kB (UM) 866*16kB (UM) 76*32kB (UM) 11*64kB (UM) 4*128kB (UM) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 86344kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB 54409 total pagecache pages 53215 pages in swap cache Swap cache stats: add 300982, delete 247765, find 157978/226539 Free swap = 3803244kB Total swap = 4192252kB 524186 pages RAM 295934 pages HighMem/MovableOnly 9642 pages reserved 0 pages cma reserved The problem is due to the active deactivation logic in inactive_list_is_low: Node 0 active_anon:404412kB inactive_anon:409040kB IOW, (inactive_anon of node * inactive_ratio > active_anon of node) due to highmem anonymous stat so VM never deactivates normal zone's anonymous pages. This patch is a modified version of Minchan's original solution but based upon it. The problem with Minchan's patch is that any low zone with an imbalanced list could force a rotation. In this patch, a zone-constrained global reclaim will rotate the list if the inactive/active ratio of all eligible zones needs to be corrected. It is possible that higher zone pages will be initially rotated prematurely but this is the safer choice to maintain overall LRU age. Link: http://lkml.kernel.org/r/20160722090929.GJ10438@techsingularity.net Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:47:34 +07:00
if (!inactive_list_is_low(lruvec, true, sc) &&
lruvec_lru_size(lruvec, LRU_INACTIVE_FILE) >> sc->priority) {
scan_balance = SCAN_FILE;
goto out;
}
scan_balance = SCAN_FRACT;
/*
* With swappiness at 100, anonymous and file have the same priority.
* This scanning priority is essentially the inverse of IO cost.
*/
anon_prio = swappiness;
file_prio = 200 - anon_prio;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
/*
* OK, so we have swap space and a fair amount of page cache
* pages. We use the recently rotated / recently scanned
* ratios to determine how valuable each cache is.
*
* Because workloads change over time (and to avoid overflow)
* we keep these statistics as a floating average, which ends
* up weighing recent references more than old ones.
*
* anon in [0], file in [1]
*/
anon = lruvec_lru_size(lruvec, LRU_ACTIVE_ANON) +
lruvec_lru_size(lruvec, LRU_INACTIVE_ANON);
file = lruvec_lru_size(lruvec, LRU_ACTIVE_FILE) +
lruvec_lru_size(lruvec, LRU_INACTIVE_FILE);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_lock_irq(&pgdat->lru_lock);
if (unlikely(reclaim_stat->recent_scanned[0] > anon / 4)) {
reclaim_stat->recent_scanned[0] /= 2;
reclaim_stat->recent_rotated[0] /= 2;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
}
if (unlikely(reclaim_stat->recent_scanned[1] > file / 4)) {
reclaim_stat->recent_scanned[1] /= 2;
reclaim_stat->recent_rotated[1] /= 2;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
}
/*
* The amount of pressure on anon vs file pages is inversely
* proportional to the fraction of recently scanned pages on
* each list that were recently referenced and in active use.
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
*/
ap = anon_prio * (reclaim_stat->recent_scanned[0] + 1);
ap /= reclaim_stat->recent_rotated[0] + 1;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
fp = file_prio * (reclaim_stat->recent_scanned[1] + 1);
fp /= reclaim_stat->recent_rotated[1] + 1;
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
spin_unlock_irq(&pgdat->lru_lock);
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
vmscan: prevent get_scan_ratio() rounding errors get_scan_ratio() calculates percentage and if the percentage is < 1%, it will round percentage down to 0% and cause we completely ignore scanning anon/file pages to reclaim memory even the total anon/file pages are very big. To avoid underflow, we don't use percentage, instead we directly calculate how many pages should be scaned. In this way, we should get several scanned pages for < 1% percent. This has some benefits: 1. increase our calculation precision 2. making our scan more smoothly. Without this, if percent[x] is underflow, shrink_zone() doesn't scan any pages and suddenly it scans all pages when priority is zero. With this, even priority isn't zero, shrink_zone() gets chance to scan some pages. Note, this patch doesn't really change logics, but just increase precision. For system with a lot of memory, this might slightly changes behavior. For example, in a sequential file read workload, without the patch, we don't swap any anon pages. With it, if anon memory size is bigger than 16G, we will see one anon page swapped. The 16G is calculated as PAGE_SIZE * priority(4096) * (fp/ap). fp/ap is assumed to be 1024 which is common in this workload. So the impact sounds not a big deal. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 04:32:36 +07:00
fraction[0] = ap;
fraction[1] = fp;
denominator = ap + fp + 1;
out:
mm: only force scan in reclaim when none of the LRUs are big enough. Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:06:44 +07:00
some_scanned = false;
/* Only use force_scan on second pass. */
for (pass = 0; !some_scanned && pass < 2; pass++) {
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
*lru_pages = 0;
mm: only force scan in reclaim when none of the LRUs are big enough. Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:06:44 +07:00
for_each_evictable_lru(lru) {
int file = is_file_lru(lru);
unsigned long size;
unsigned long scan;
size = lruvec_lru_size(lruvec, lru);
mm: only force scan in reclaim when none of the LRUs are big enough. Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:06:44 +07:00
scan = size >> sc->priority;
mm: only force scan in reclaim when none of the LRUs are big enough. Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:06:44 +07:00
if (!scan && pass && force_scan)
scan = min(size, SWAP_CLUSTER_MAX);
mm: only force scan in reclaim when none of the LRUs are big enough. Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:06:44 +07:00
switch (scan_balance) {
case SCAN_EQUAL:
/* Scan lists relative to size */
break;
case SCAN_FRACT:
/*
* Scan types proportional to swappiness and
* their relative recent reclaim efficiency.
*/
scan = div64_u64(scan * fraction[file],
denominator);
break;
case SCAN_FILE:
case SCAN_ANON:
/* Scan one type exclusively */
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
if ((scan_balance == SCAN_FILE) != file) {
size = 0;
mm: only force scan in reclaim when none of the LRUs are big enough. Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:06:44 +07:00
scan = 0;
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
}
mm: only force scan in reclaim when none of the LRUs are big enough. Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:06:44 +07:00
break;
default:
/* Look ma, no brain */
BUG();
}
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
*lru_pages += size;
mm: only force scan in reclaim when none of the LRUs are big enough. Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:06:44 +07:00
nr[lru] = scan;
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
/*
mm: only force scan in reclaim when none of the LRUs are big enough. Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:06:44 +07:00
* Skip the second pass and don't force_scan,
* if we found something to scan.
*/
mm: only force scan in reclaim when none of the LRUs are big enough. Prior to this change, we would decide whether to force scan a LRU during reclaim if that LRU itself was too small for the current priority. However, this can lead to the file LRU getting force scanned even if there are a lot of anonymous pages we can reclaim, leading to hot file pages getting needlessly reclaimed. To address this, we instead only force scan when none of the reclaimable LRUs are big enough. Gives huge improvements with zswap. For example, when doing -j20 kernel build in a 500MB container with zswap enabled, runtime (in seconds) is greatly reduced: x without this change + with this change N Min Max Median Avg Stddev x 5 700.997 790.076 763.928 754.05 39.59493 + 5 141.634 197.899 155.706 161.9 21.270224 Difference at 95.0% confidence -592.15 +/- 46.3521 -78.5293% +/- 6.14709% (Student's t, pooled s = 31.7819) Should also give some improvements in regular (non-zswap) swap cases. Yes, hughd found significant speedup using regular swap, with several memcgs under pressure; and it should also be effective in the non-memcg case, whenever one or another zone LRU is forced too small. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:06:44 +07:00
some_scanned |= !!scan;
}
vmscan: prevent get_scan_ratio() rounding errors get_scan_ratio() calculates percentage and if the percentage is < 1%, it will round percentage down to 0% and cause we completely ignore scanning anon/file pages to reclaim memory even the total anon/file pages are very big. To avoid underflow, we don't use percentage, instead we directly calculate how many pages should be scaned. In this way, we should get several scanned pages for < 1% percent. This has some benefits: 1. increase our calculation precision 2. making our scan more smoothly. Without this, if percent[x] is underflow, shrink_zone() doesn't scan any pages and suddenly it scans all pages when priority is zero. With this, even priority isn't zero, shrink_zone() gets chance to scan some pages. Note, this patch doesn't really change logics, but just increase precision. For system with a lot of memory, this might slightly changes behavior. For example, in a sequential file read workload, without the patch, we don't swap any anon pages. With it, if anon memory size is bigger than 16G, we will see one anon page swapped. The 16G is calculated as PAGE_SIZE * priority(4096) * (fp/ap). fp/ap is assumed to be 1024 which is common in this workload. So the impact sounds not a big deal. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 04:32:36 +07:00
}
}
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 05:47:32 +07:00
#ifdef CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
static void init_tlb_ubc(void)
{
/*
* This deliberately does not clear the cpumask as it's expensive
* and unnecessary. If there happens to be data in there then the
* first SWAP_CLUSTER_MAX pages will send an unnecessary IPI and
* then will be cleared.
*/
current->tlb_ubc.flush_required = false;
}
#else
static inline void init_tlb_ubc(void)
{
}
#endif /* CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH */
2013-02-23 07:32:19 +07:00
/*
* This is a basic per-node page freer. Used by both kswapd and direct reclaim.
2013-02-23 07:32:19 +07:00
*/
static void shrink_node_memcg(struct pglist_data *pgdat, struct mem_cgroup *memcg,
struct scan_control *sc, unsigned long *lru_pages)
2013-02-23 07:32:19 +07:00
{
struct lruvec *lruvec = mem_cgroup_lruvec(pgdat, memcg);
2013-02-23 07:32:19 +07:00
unsigned long nr[NR_LRU_LISTS];
unsigned long targets[NR_LRU_LISTS];
2013-02-23 07:32:19 +07:00
unsigned long nr_to_scan;
enum lru_list lru;
unsigned long nr_reclaimed = 0;
unsigned long nr_to_reclaim = sc->nr_to_reclaim;
struct blk_plug plug;
mm: vmscan: use proportional scanning during direct reclaim and full scan at DEF_PRIORITY Commit "mm: vmscan: obey proportional scanning requirements for kswapd" ensured that file/anon lists were scanned proportionally for reclaim from kswapd but ignored it for direct reclaim. The intent was to minimse direct reclaim latency but Yuanhan Liu pointer out that it substitutes one long stall for many small stalls and distorts aging for normal workloads like streaming readers/writers. Hugh Dickins pointed out that a side-effect of the same commit was that when one LRU list dropped to zero that the entirety of the other list was shrunk leading to excessive reclaim in memcgs. This patch scans the file/anon lists proportionally for direct reclaim to similarly age page whether reclaimed by kswapd or direct reclaim but takes care to abort reclaim if one LRU drops to zero after reclaiming the requested number of pages. Based on ext4 and using the Intel VM scalability test 3.15.0-rc5 3.15.0-rc5 shrinker proportion Unit lru-file-readonce elapsed 5.3500 ( 0.00%) 5.4200 ( -1.31%) Unit lru-file-readonce time_range 0.2700 ( 0.00%) 0.1400 ( 48.15%) Unit lru-file-readonce time_stddv 0.1148 ( 0.00%) 0.0536 ( 53.33%) Unit lru-file-readtwice elapsed 8.1700 ( 0.00%) 8.1700 ( 0.00%) Unit lru-file-readtwice time_range 0.4300 ( 0.00%) 0.2300 ( 46.51%) Unit lru-file-readtwice time_stddv 0.1650 ( 0.00%) 0.0971 ( 41.16%) The test cases are running multiple dd instances reading sparse files. The results are within the noise for the small test machine. The impact of the patch is more noticable from the vmstats 3.15.0-rc5 3.15.0-rc5 shrinker proportion Minor Faults 35154 36784 Major Faults 611 1305 Swap Ins 394 1651 Swap Outs 4394 5891 Allocation stalls 118616 44781 Direct pages scanned 4935171 4602313 Kswapd pages scanned 15921292 16258483 Kswapd pages reclaimed 15913301 16248305 Direct pages reclaimed 4933368 4601133 Kswapd efficiency 99% 99% Kswapd velocity 670088.047 682555.961 Direct efficiency 99% 99% Direct velocity 207709.217 193212.133 Percentage direct scans 23% 22% Page writes by reclaim 4858.000 6232.000 Page writes file 464 341 Page writes anon 4394 5891 Note that there are fewer allocation stalls even though the amount of direct reclaim scanning is very approximately the same. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:10:49 +07:00
bool scan_adjusted;
2013-02-23 07:32:19 +07:00
get_scan_count(lruvec, memcg, sc, nr, lru_pages);
2013-02-23 07:32:19 +07:00
/* Record the original scan target for proportional adjustments later */
memcpy(targets, nr, sizeof(nr));
mm: vmscan: use proportional scanning during direct reclaim and full scan at DEF_PRIORITY Commit "mm: vmscan: obey proportional scanning requirements for kswapd" ensured that file/anon lists were scanned proportionally for reclaim from kswapd but ignored it for direct reclaim. The intent was to minimse direct reclaim latency but Yuanhan Liu pointer out that it substitutes one long stall for many small stalls and distorts aging for normal workloads like streaming readers/writers. Hugh Dickins pointed out that a side-effect of the same commit was that when one LRU list dropped to zero that the entirety of the other list was shrunk leading to excessive reclaim in memcgs. This patch scans the file/anon lists proportionally for direct reclaim to similarly age page whether reclaimed by kswapd or direct reclaim but takes care to abort reclaim if one LRU drops to zero after reclaiming the requested number of pages. Based on ext4 and using the Intel VM scalability test 3.15.0-rc5 3.15.0-rc5 shrinker proportion Unit lru-file-readonce elapsed 5.3500 ( 0.00%) 5.4200 ( -1.31%) Unit lru-file-readonce time_range 0.2700 ( 0.00%) 0.1400 ( 48.15%) Unit lru-file-readonce time_stddv 0.1148 ( 0.00%) 0.0536 ( 53.33%) Unit lru-file-readtwice elapsed 8.1700 ( 0.00%) 8.1700 ( 0.00%) Unit lru-file-readtwice time_range 0.4300 ( 0.00%) 0.2300 ( 46.51%) Unit lru-file-readtwice time_stddv 0.1650 ( 0.00%) 0.0971 ( 41.16%) The test cases are running multiple dd instances reading sparse files. The results are within the noise for the small test machine. The impact of the patch is more noticable from the vmstats 3.15.0-rc5 3.15.0-rc5 shrinker proportion Minor Faults 35154 36784 Major Faults 611 1305 Swap Ins 394 1651 Swap Outs 4394 5891 Allocation stalls 118616 44781 Direct pages scanned 4935171 4602313 Kswapd pages scanned 15921292 16258483 Kswapd pages reclaimed 15913301 16248305 Direct pages reclaimed 4933368 4601133 Kswapd efficiency 99% 99% Kswapd velocity 670088.047 682555.961 Direct efficiency 99% 99% Direct velocity 207709.217 193212.133 Percentage direct scans 23% 22% Page writes by reclaim 4858.000 6232.000 Page writes file 464 341 Page writes anon 4394 5891 Note that there are fewer allocation stalls even though the amount of direct reclaim scanning is very approximately the same. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:10:49 +07:00
/*
* Global reclaiming within direct reclaim at DEF_PRIORITY is a normal
* event that can occur when there is little memory pressure e.g.
* multiple streaming readers/writers. Hence, we do not abort scanning
* when the requested number of pages are reclaimed when scanning at
* DEF_PRIORITY on the assumption that the fact we are direct
* reclaiming implies that kswapd is not keeping up and it is best to
* do a batch of work at once. For memcg reclaim one check is made to
* abort proportional reclaim if either the file or anon lru has already
* dropped to zero at the first pass.
*/
scan_adjusted = (global_reclaim(sc) && !current_is_kswapd() &&
sc->priority == DEF_PRIORITY);
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 05:47:32 +07:00
init_tlb_ubc();
2013-02-23 07:32:19 +07:00
blk_start_plug(&plug);
while (nr[LRU_INACTIVE_ANON] || nr[LRU_ACTIVE_FILE] ||
nr[LRU_INACTIVE_FILE]) {
unsigned long nr_anon, nr_file, percentage;
unsigned long nr_scanned;
2013-02-23 07:32:19 +07:00
for_each_evictable_lru(lru) {
if (nr[lru]) {
nr_to_scan = min(nr[lru], SWAP_CLUSTER_MAX);
nr[lru] -= nr_to_scan;
nr_reclaimed += shrink_list(lru, nr_to_scan,
lruvec, sc);
}
}
if (nr_reclaimed < nr_to_reclaim || scan_adjusted)
continue;
/*
* For kswapd and memcg, reclaim at least the number of pages
mm: vmscan: use proportional scanning during direct reclaim and full scan at DEF_PRIORITY Commit "mm: vmscan: obey proportional scanning requirements for kswapd" ensured that file/anon lists were scanned proportionally for reclaim from kswapd but ignored it for direct reclaim. The intent was to minimse direct reclaim latency but Yuanhan Liu pointer out that it substitutes one long stall for many small stalls and distorts aging for normal workloads like streaming readers/writers. Hugh Dickins pointed out that a side-effect of the same commit was that when one LRU list dropped to zero that the entirety of the other list was shrunk leading to excessive reclaim in memcgs. This patch scans the file/anon lists proportionally for direct reclaim to similarly age page whether reclaimed by kswapd or direct reclaim but takes care to abort reclaim if one LRU drops to zero after reclaiming the requested number of pages. Based on ext4 and using the Intel VM scalability test 3.15.0-rc5 3.15.0-rc5 shrinker proportion Unit lru-file-readonce elapsed 5.3500 ( 0.00%) 5.4200 ( -1.31%) Unit lru-file-readonce time_range 0.2700 ( 0.00%) 0.1400 ( 48.15%) Unit lru-file-readonce time_stddv 0.1148 ( 0.00%) 0.0536 ( 53.33%) Unit lru-file-readtwice elapsed 8.1700 ( 0.00%) 8.1700 ( 0.00%) Unit lru-file-readtwice time_range 0.4300 ( 0.00%) 0.2300 ( 46.51%) Unit lru-file-readtwice time_stddv 0.1650 ( 0.00%) 0.0971 ( 41.16%) The test cases are running multiple dd instances reading sparse files. The results are within the noise for the small test machine. The impact of the patch is more noticable from the vmstats 3.15.0-rc5 3.15.0-rc5 shrinker proportion Minor Faults 35154 36784 Major Faults 611 1305 Swap Ins 394 1651 Swap Outs 4394 5891 Allocation stalls 118616 44781 Direct pages scanned 4935171 4602313 Kswapd pages scanned 15921292 16258483 Kswapd pages reclaimed 15913301 16248305 Direct pages reclaimed 4933368 4601133 Kswapd efficiency 99% 99% Kswapd velocity 670088.047 682555.961 Direct efficiency 99% 99% Direct velocity 207709.217 193212.133 Percentage direct scans 23% 22% Page writes by reclaim 4858.000 6232.000 Page writes file 464 341 Page writes anon 4394 5891 Note that there are fewer allocation stalls even though the amount of direct reclaim scanning is very approximately the same. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:10:49 +07:00
* requested. Ensure that the anon and file LRUs are scanned
* proportionally what was requested by get_scan_count(). We
* stop reclaiming one LRU and reduce the amount scanning
* proportional to the original scan target.
*/
nr_file = nr[LRU_INACTIVE_FILE] + nr[LRU_ACTIVE_FILE];
nr_anon = nr[LRU_INACTIVE_ANON] + nr[LRU_ACTIVE_ANON];
mm: vmscan: use proportional scanning during direct reclaim and full scan at DEF_PRIORITY Commit "mm: vmscan: obey proportional scanning requirements for kswapd" ensured that file/anon lists were scanned proportionally for reclaim from kswapd but ignored it for direct reclaim. The intent was to minimse direct reclaim latency but Yuanhan Liu pointer out that it substitutes one long stall for many small stalls and distorts aging for normal workloads like streaming readers/writers. Hugh Dickins pointed out that a side-effect of the same commit was that when one LRU list dropped to zero that the entirety of the other list was shrunk leading to excessive reclaim in memcgs. This patch scans the file/anon lists proportionally for direct reclaim to similarly age page whether reclaimed by kswapd or direct reclaim but takes care to abort reclaim if one LRU drops to zero after reclaiming the requested number of pages. Based on ext4 and using the Intel VM scalability test 3.15.0-rc5 3.15.0-rc5 shrinker proportion Unit lru-file-readonce elapsed 5.3500 ( 0.00%) 5.4200 ( -1.31%) Unit lru-file-readonce time_range 0.2700 ( 0.00%) 0.1400 ( 48.15%) Unit lru-file-readonce time_stddv 0.1148 ( 0.00%) 0.0536 ( 53.33%) Unit lru-file-readtwice elapsed 8.1700 ( 0.00%) 8.1700 ( 0.00%) Unit lru-file-readtwice time_range 0.4300 ( 0.00%) 0.2300 ( 46.51%) Unit lru-file-readtwice time_stddv 0.1650 ( 0.00%) 0.0971 ( 41.16%) The test cases are running multiple dd instances reading sparse files. The results are within the noise for the small test machine. The impact of the patch is more noticable from the vmstats 3.15.0-rc5 3.15.0-rc5 shrinker proportion Minor Faults 35154 36784 Major Faults 611 1305 Swap Ins 394 1651 Swap Outs 4394 5891 Allocation stalls 118616 44781 Direct pages scanned 4935171 4602313 Kswapd pages scanned 15921292 16258483 Kswapd pages reclaimed 15913301 16248305 Direct pages reclaimed 4933368 4601133 Kswapd efficiency 99% 99% Kswapd velocity 670088.047 682555.961 Direct efficiency 99% 99% Direct velocity 207709.217 193212.133 Percentage direct scans 23% 22% Page writes by reclaim 4858.000 6232.000 Page writes file 464 341 Page writes anon 4394 5891 Note that there are fewer allocation stalls even though the amount of direct reclaim scanning is very approximately the same. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:10:49 +07:00
/*
* It's just vindictive to attack the larger once the smaller
* has gone to zero. And given the way we stop scanning the
* smaller below, this makes sure that we only make one nudge
* towards proportionality once we've got nr_to_reclaim.
*/
if (!nr_file || !nr_anon)
break;
if (nr_file > nr_anon) {
unsigned long scan_target = targets[LRU_INACTIVE_ANON] +
targets[LRU_ACTIVE_ANON] + 1;
lru = LRU_BASE;
percentage = nr_anon * 100 / scan_target;
} else {
unsigned long scan_target = targets[LRU_INACTIVE_FILE] +
targets[LRU_ACTIVE_FILE] + 1;
lru = LRU_FILE;
percentage = nr_file * 100 / scan_target;
}
/* Stop scanning the smaller of the LRU */
nr[lru] = 0;
nr[lru + LRU_ACTIVE] = 0;
/*
* Recalculate the other LRU scan count based on its original
* scan target and the percentage scanning already complete
*/
lru = (lru == LRU_FILE) ? LRU_BASE : LRU_FILE;
nr_scanned = targets[lru] - nr[lru];
nr[lru] = targets[lru] * (100 - percentage) / 100;
nr[lru] -= min(nr[lru], nr_scanned);
lru += LRU_ACTIVE;
nr_scanned = targets[lru] - nr[lru];
nr[lru] = targets[lru] * (100 - percentage) / 100;
nr[lru] -= min(nr[lru], nr_scanned);
scan_adjusted = true;
2013-02-23 07:32:19 +07:00
}
blk_finish_plug(&plug);
sc->nr_reclaimed += nr_reclaimed;
/*
* Even if we did not try to evict anon pages at all, we want to
* rebalance the anon lru active/inactive ratio.
*/
mm: consider whether to decivate based on eligible zones inactive ratio Minchan Kim reported that with per-zone lru state it was possible to identify that a normal zone with 8^M anonymous pages could trigger OOM with non-atomic order-0 allocations as all pages in the zone were in the active list. gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0 Call Trace: __alloc_pages_nodemask+0xe52/0xe60 ? new_slab+0x39c/0x3b0 new_slab+0x39c/0x3b0 ___slab_alloc.constprop.87+0x6da/0x840 ? __alloc_skb+0x3c/0x260 ? enqueue_task_fair+0x73/0xbf0 ? poll_select_copy_remaining+0x140/0x140 __slab_alloc.isra.81.constprop.86+0x40/0x6d ? __alloc_skb+0x3c/0x260 kmem_cache_alloc+0x22c/0x260 ? __alloc_skb+0x3c/0x260 __alloc_skb+0x3c/0x260 alloc_skb_with_frags+0x4e/0x1a0 sock_alloc_send_pskb+0x16a/0x1b0 ? wait_for_unix_gc+0x31/0x90 unix_stream_sendmsg+0x28d/0x340 sock_sendmsg+0x2d/0x40 sock_write_iter+0x6c/0xc0 __vfs_write+0xc0/0x120 vfs_write+0x9b/0x1a0 ? __might_fault+0x49/0xa0 SyS_write+0x44/0x90 do_fast_syscall_32+0xa6/0x1e0 Mem-Info: active_anon:101103 inactive_anon:102219 isolated_anon:0 active_file:503 inactive_file:544 isolated_file:0 unevictable:0 dirty:0 writeback:34 unstable:0 slab_reclaimable:6298 slab_unreclaimable:74669 mapped:863 shmem:0 pagetables:100998 bounce:0 free:23573 free_pcp:1861 free_cma:0 Node 0 active_anon:404412kB inactive_anon:409040kB active_file:2012kB inactive_file:2176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:3452kB dirty:0kB writeback:136kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1320845 all_unreclaimable? yes DMA free:3296kB min:68kB low:84kB high:100kB active_anon:5540kB inactive_anon:0kB active_file:0kB inactive_file:0kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:248kB slab_unreclaimable:2628kB kernel_stack:792kB pagetables:2316kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 809 1965 1965 Normal free:3600kB min:3604kB low:4504kB high:5404kB active_anon:86304kB inactive_anon:0kB active_file:160kB inactive_file:376kB present:897016kB managed:858524kB mlocked:0kB slab_reclaimable:24944kB slab_unreclaimable:296048kB kernel_stack:163832kB pagetables:35892kB bounce:0kB free_pcp:3076kB local_pcp:656kB free_cma:0kB lowmem_reserve[]: 0 0 9247 9247 HighMem free:86156kB min:512kB low:1796kB high:3080kB active_anon:312852kB inactive_anon:410024kB active_file:1924kB inactive_file:2012kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:365784kB bounce:0kB free_pcp:3868kB local_pcp:720kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 8*4kB (UM) 8*8kB (UM) 4*16kB (M) 2*32kB (UM) 2*64kB (UM) 1*128kB (M) 3*256kB (UME) 2*512kB (UE) 1*1024kB (E) 0*2048kB 0*4096kB = 3296kB Normal: 240*4kB (UME) 160*8kB (UME) 23*16kB (ME) 3*32kB (UE) 3*64kB (UME) 2*128kB (ME) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3408kB HighMem: 10942*4kB (UM) 3102*8kB (UM) 866*16kB (UM) 76*32kB (UM) 11*64kB (UM) 4*128kB (UM) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 86344kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB 54409 total pagecache pages 53215 pages in swap cache Swap cache stats: add 300982, delete 247765, find 157978/226539 Free swap = 3803244kB Total swap = 4192252kB 524186 pages RAM 295934 pages HighMem/MovableOnly 9642 pages reserved 0 pages cma reserved The problem is due to the active deactivation logic in inactive_list_is_low: Node 0 active_anon:404412kB inactive_anon:409040kB IOW, (inactive_anon of node * inactive_ratio > active_anon of node) due to highmem anonymous stat so VM never deactivates normal zone's anonymous pages. This patch is a modified version of Minchan's original solution but based upon it. The problem with Minchan's patch is that any low zone with an imbalanced list could force a rotation. In this patch, a zone-constrained global reclaim will rotate the list if the inactive/active ratio of all eligible zones needs to be corrected. It is possible that higher zone pages will be initially rotated prematurely but this is the safer choice to maintain overall LRU age. Link: http://lkml.kernel.org/r/20160722090929.GJ10438@techsingularity.net Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:47:34 +07:00
if (inactive_list_is_low(lruvec, false, sc))
2013-02-23 07:32:19 +07:00
shrink_active_list(SWAP_CLUSTER_MAX, lruvec,
sc, LRU_ACTIVE_ANON);
throttle_vm_writeout(sc->gfp_mask);
}
/* Use reclaim/compaction for costly allocs or under memory pressure */
static bool in_reclaim_compaction(struct scan_control *sc)
{
if (IS_ENABLED(CONFIG_COMPACTION) && sc->order &&
(sc->order > PAGE_ALLOC_COSTLY_ORDER ||
sc->priority < DEF_PRIORITY - 2))
return true;
return false;
}
/*
* Reclaim/compaction is used for high-order allocation requests. It reclaims
* order-0 pages before compacting the zone. should_continue_reclaim() returns
* true if more pages should be reclaimed such that when the page allocator
* calls try_to_compact_zone() that it will have enough free pages to succeed.
* It will give up earlier than that if there is difficulty reclaiming pages.
*/
static inline bool should_continue_reclaim(struct pglist_data *pgdat,
unsigned long nr_reclaimed,
unsigned long nr_scanned,
struct scan_control *sc)
{
unsigned long pages_for_compaction;
unsigned long inactive_lru_pages;
int z;
/* If not in reclaim/compaction mode, stop */
if (!in_reclaim_compaction(sc))
return false;
mm: vmscan: stop reclaim/compaction earlier due to insufficient progress if !__GFP_REPEAT should_continue_reclaim() for reclaim/compaction allows scanning to continue even if pages are not being reclaimed until the full list is scanned. In terms of allocation success, this makes sense but potentially it introduces unwanted latency for high-order allocations such as transparent hugepages and network jumbo frames that would prefer to fail the allocation attempt and fallback to order-0 pages. Worse, there is a potential that the full LRU scan will clear all the young bits, distort page aging information and potentially push pages into swap that would have otherwise remained resident. This patch will stop reclaim/compaction if no pages were reclaimed in the last SWAP_CLUSTER_MAX pages that were considered. For allocations such as hugetlbfs that use __GFP_REPEAT and have fewer fallback options, the full LRU list may still be scanned. Order-0 allocation should not be affected because RECLAIM_MODE_COMPACTION is not set so the following avoids the gfp_mask being examined: if (!(sc->reclaim_mode & RECLAIM_MODE_COMPACTION)) return false; A tool was developed based on ftrace that tracked the latency of high-order allocations while transparent hugepage support was enabled and three benchmarks were run. The "fix-infinite" figures are 2.6.38-rc4 with Johannes's patch "vmscan: fix zone shrinking exit when scan work is done" applied. STREAM Highorder Allocation Latency Statistics fix-infinite break-early 1 :: Count 10298 10229 1 :: Min 0.4560 0.4640 1 :: Mean 1.0589 1.0183 1 :: Max 14.5990 11.7510 1 :: Stddev 0.5208 0.4719 2 :: Count 2 1 2 :: Min 1.8610 3.7240 2 :: Mean 3.4325 3.7240 2 :: Max 5.0040 3.7240 2 :: Stddev 1.5715 0.0000 9 :: Count 111696 111694 9 :: Min 0.5230 0.4110 9 :: Mean 10.5831 10.5718 9 :: Max 38.4480 43.2900 9 :: Stddev 1.1147 1.1325 Mean time for order-1 allocations is reduced. order-2 looks increased but with so few allocations, it's not particularly significant. THP mean allocation latency is also reduced. That said, allocation time varies so significantly that the reductions are within noise. Max allocation time is reduced by a significant amount for low-order allocations but reduced for THP allocations which presumably are now breaking before reclaim has done enough work. SysBench Highorder Allocation Latency Statistics fix-infinite break-early 1 :: Count 15745 15677 1 :: Min 0.4250 0.4550 1 :: Mean 1.1023 1.0810 1 :: Max 14.4590 10.8220 1 :: Stddev 0.5117 0.5100 2 :: Count 1 1 2 :: Min 3.0040 2.1530 2 :: Mean 3.0040 2.1530 2 :: Max 3.0040 2.1530 2 :: Stddev 0.0000 0.0000 9 :: Count 2017 1931 9 :: Min 0.4980 0.7480 9 :: Mean 10.4717 10.3840 9 :: Max 24.9460 26.2500 9 :: Stddev 1.1726 1.1966 Again, mean time for order-1 allocations is reduced while order-2 allocations are too few to draw conclusions from. The mean time for THP allocations is also slightly reduced albeit the reductions are within varianes. Once again, our maximum allocation time is significantly reduced for low-order allocations and slightly increased for THP allocations. Anon stream mmap reference Highorder Allocation Latency Statistics 1 :: Count 1376 1790 1 :: Min 0.4940 0.5010 1 :: Mean 1.0289 0.9732 1 :: Max 6.2670 4.2540 1 :: Stddev 0.4142 0.2785 2 :: Count 1 - 2 :: Min 1.9060 - 2 :: Mean 1.9060 - 2 :: Max 1.9060 - 2 :: Stddev 0.0000 - 9 :: Count 11266 11257 9 :: Min 0.4990 0.4940 9 :: Mean 27250.4669 24256.1919 9 :: Max 11439211.0000 6008885.0000 9 :: Stddev 226427.4624 186298.1430 This benchmark creates one thread per CPU which references an amount of anonymous memory 1.5 times the size of physical RAM. This pounds swap quite heavily and is intended to exercise THP a bit. Mean allocation time for order-1 is reduced as before. It's also reduced for THP allocations but the variations here are pretty massive due to swap. As before, maximum allocation times are significantly reduced. Overall, the patch reduces the mean and maximum allocation latencies for the smaller high-order allocations. This was with Slab configured so it would be expected to be more significant with Slub which uses these size allocations more aggressively. The mean allocation times for THP allocations are also slightly reduced. The maximum latency was slightly increased as predicted by the comments due to reclaim/compaction breaking early. However, workloads care more about the latency of lower-order allocations than THP so it's an acceptable trade-off. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-26 05:44:20 +07:00
/* Consider stopping depending on scan and reclaim activity */
if (sc->gfp_mask & __GFP_REPEAT) {
/*
* For __GFP_REPEAT allocations, stop reclaiming if the
* full LRU list has been scanned and we are still failing
* to reclaim pages. This full LRU scan is potentially
* expensive but a __GFP_REPEAT caller really wants to succeed
*/
if (!nr_reclaimed && !nr_scanned)
return false;
} else {
/*
* For non-__GFP_REPEAT allocations which can presumably
* fail without consequence, stop if we failed to reclaim
* any pages from the last SWAP_CLUSTER_MAX number of
* pages that were scanned. This will return to the
* caller faster at the risk reclaim/compaction and
* the resulting allocation attempt fails
*/
if (!nr_reclaimed)
return false;
}
/*
* If we have not reclaimed enough pages for compaction and the
* inactive lists are large enough, continue reclaiming
*/
pages_for_compaction = (2UL << sc->order);
inactive_lru_pages = node_page_state(pgdat, NR_INACTIVE_FILE);
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 07:34:38 +07:00
if (get_nr_swap_pages() > 0)
inactive_lru_pages += node_page_state(pgdat, NR_INACTIVE_ANON);
if (sc->nr_reclaimed < pages_for_compaction &&
inactive_lru_pages > pages_for_compaction)
return true;
/* If compaction would go ahead or the allocation would succeed, stop */
for (z = 0; z <= sc->reclaim_idx; z++) {
struct zone *zone = &pgdat->node_zones[z];
if (!populated_zone(zone))
continue;
switch (compaction_suitable(zone, sc->order, 0, sc->reclaim_idx)) {
case COMPACT_PARTIAL:
case COMPACT_CONTINUE:
return false;
default:
/* check next zone */
;
}
}
return true;
}
static bool shrink_node(pg_data_t *pgdat, struct scan_control *sc)
{
struct reclaim_state *reclaim_state = current->reclaim_state;
unsigned long nr_reclaimed, nr_scanned;
bool reclaimable = false;
2013-02-23 07:32:19 +07:00
do {
struct mem_cgroup *root = sc->target_mem_cgroup;
struct mem_cgroup_reclaim_cookie reclaim = {
.pgdat = pgdat,
2013-02-23 07:32:19 +07:00
.priority = sc->priority,
};
unsigned long node_lru_pages = 0;
struct mem_cgroup *memcg;
2013-02-23 07:32:19 +07:00
nr_reclaimed = sc->nr_reclaimed;
nr_scanned = sc->nr_scanned;
memcg = mem_cgroup_iter(root, NULL, &reclaim);
do {
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
unsigned long lru_pages;
unsigned long reclaimed;
unsigned long scanned;
mm: memcontrol: default hierarchy interface for memory Introduce the basic control files to account, partition, and limit memory using cgroups in default hierarchy mode. This interface versioning allows us to address fundamental design issues in the existing memory cgroup interface, further explained below. The old interface will be maintained indefinitely, but a clearer model and improved workload performance should encourage existing users to switch over to the new one eventually. The control files are thus: - memory.current shows the current consumption of the cgroup and its descendants, in bytes. - memory.low configures the lower end of the cgroup's expected memory consumption range. The kernel considers memory below that boundary to be a reserve - the minimum that the workload needs in order to make forward progress - and generally avoids reclaiming it, unless there is an imminent risk of entering an OOM situation. - memory.high configures the upper end of the cgroup's expected memory consumption range. A cgroup whose consumption grows beyond this threshold is forced into direct reclaim, to work off the excess and to throttle new allocations heavily, but is generally allowed to continue and the OOM killer is not invoked. - memory.max configures the hard maximum amount of memory that the cgroup is allowed to consume before the OOM killer is invoked. - memory.events shows event counters that indicate how often the cgroup was reclaimed while below memory.low, how often it was forced to reclaim excess beyond memory.high, how often it hit memory.max, and how often it entered OOM due to memory.max. This allows users to identify configuration problems when observing a degradation in workload performance. An overcommitted system will have an increased rate of low boundary breaches, whereas increased rates of high limit breaches, maximum hits, or even OOM situations will indicate internally overcommitted cgroups. For existing users of memory cgroups, the following deviations from the current interface are worth pointing out and explaining: - The original lower boundary, the soft limit, is defined as a limit that is per default unset. As a result, the set of cgroups that global reclaim prefers is opt-in, rather than opt-out. The costs for optimizing these mostly negative lookups are so high that the implementation, despite its enormous size, does not even provide the basic desirable behavior. First off, the soft limit has no hierarchical meaning. All configured groups are organized in a global rbtree and treated like equal peers, regardless where they are located in the hierarchy. This makes subtree delegation impossible. Second, the soft limit reclaim pass is so aggressive that it not just introduces high allocation latencies into the system, but also impacts system performance due to overreclaim, to the point where the feature becomes self-defeating. The memory.low boundary on the other hand is a top-down allocated reserve. A cgroup enjoys reclaim protection when it and all its ancestors are below their low boundaries, which makes delegation of subtrees possible. Secondly, new cgroups have no reserve per default and in the common case most cgroups are eligible for the preferred reclaim pass. This allows the new low boundary to be efficiently implemented with just a minor addition to the generic reclaim code, without the need for out-of-band data structures and reclaim passes. Because the generic reclaim code considers all cgroups except for the ones running low in the preferred first reclaim pass, overreclaim of individual groups is eliminated as well, resulting in much better overall workload performance. - The original high boundary, the hard limit, is defined as a strict limit that can not budge, even if the OOM killer has to be called. But this generally goes against the goal of making the most out of the available memory. The memory consumption of workloads varies during runtime, and that requires users to overcommit. But doing that with a strict upper limit requires either a fairly accurate prediction of the working set size or adding slack to the limit. Since working set size estimation is hard and error prone, and getting it wrong results in OOM kills, most users tend to err on the side of a looser limit and end up wasting precious resources. The memory.high boundary on the other hand can be set much more conservatively. When hit, it throttles allocations by forcing them into direct reclaim to work off the excess, but it never invokes the OOM killer. As a result, a high boundary that is chosen too aggressively will not terminate the processes, but instead it will lead to gradual performance degradation. The user can monitor this and make corrections until the minimal memory footprint that still gives acceptable performance is found. In extreme cases, with many concurrent allocations and a complete breakdown of reclaim progress within the group, the high boundary can be exceeded. But even then it's mostly better to satisfy the allocation from the slack available in other groups or the rest of the system than killing the group. Otherwise, memory.max is there to limit this type of spillover and ultimately contain buggy or even malicious applications. - The original control file names are unwieldy and inconsistent in many different ways. For example, the upper boundary hit count is exported in the memory.failcnt file, but an OOM event count has to be manually counted by listening to memory.oom_control events, and lower boundary / soft limit events have to be counted by first setting a threshold for that value and then counting those events. Also, usage and limit files encode their units in the filename. That makes the filenames very long, even though this is not information that a user needs to be reminded of every time they type out those names. To address these naming issues, as well as to signal clearly that the new interface carries a new configuration model, the naming conventions in it necessarily differ from the old interface. - The original limit files indicate the state of an unset limit with a very high number, and a configured limit can be unset by echoing -1 into those files. But that very high number is implementation and architecture dependent and not very descriptive. And while -1 can be understood as an underflow into the highest possible value, -2 or -10M etc. do not work, so it's not inconsistent. memory.low, memory.high, and memory.max will use the string "infinity" to indicate and set the highest possible value. [akpm@linux-foundation.org: use seq_puts() for basic strings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:06 +07:00
if (mem_cgroup_low(root, memcg)) {
if (!sc->may_thrash)
continue;
mem_cgroup_events(memcg, MEMCG_LOW, 1);
}
reclaimed = sc->nr_reclaimed;
scanned = sc->nr_scanned;
shrink_node_memcg(pgdat, memcg, sc, &lru_pages);
node_lru_pages += lru_pages;
if (!global_reclaim(sc))
shrink_slab(sc->gfp_mask, pgdat->node_id,
memcg, sc->nr_scanned - scanned,
lru_pages);
/* Record the group's reclaim efficiency */
vmpressure(sc->gfp_mask, memcg, false,
sc->nr_scanned - scanned,
sc->nr_reclaimed - reclaimed);
2013-02-23 07:32:19 +07:00
/*
memcg,vmscan: do not break out targeted reclaim without reclaimed pages Targeted (hard resp soft) reclaim has traditionally tried to scan one group with decreasing priority until nr_to_reclaim (SWAP_CLUSTER_MAX pages) is reclaimed or all priorities are exhausted. The reclaim is then retried until the limit is met. This approach, however, doesn't work well with deeper hierarchies where groups higher in the hierarchy do not have any or only very few pages (this usually happens if those groups do not have any tasks and they have only re-parented pages after some of their children is removed). Those groups are reclaimed with decreasing priority pointlessly as there is nothing to reclaim from them. An easiest fix is to break out of the memcg iteration loop in shrink_zone only if the whole hierarchy has been visited or sufficient pages have been reclaimed. This is also more natural because the reclaimer expects that the hierarchy under the given root is reclaimed. As a result we can simplify the soft limit reclaim which does its own iteration. [yinghan@google.com: break out of the hierarchy loop only if nr_reclaimed exceeded nr_to_reclaim] [akpm@linux-foundation.org: use conventional comparison order] Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Ying Han <yinghan@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 07:32:30 +07:00
* Direct reclaim and kswapd have to scan all memory
* cgroups to fulfill the overall scan target for the
* node.
memcg,vmscan: do not break out targeted reclaim without reclaimed pages Targeted (hard resp soft) reclaim has traditionally tried to scan one group with decreasing priority until nr_to_reclaim (SWAP_CLUSTER_MAX pages) is reclaimed or all priorities are exhausted. The reclaim is then retried until the limit is met. This approach, however, doesn't work well with deeper hierarchies where groups higher in the hierarchy do not have any or only very few pages (this usually happens if those groups do not have any tasks and they have only re-parented pages after some of their children is removed). Those groups are reclaimed with decreasing priority pointlessly as there is nothing to reclaim from them. An easiest fix is to break out of the memcg iteration loop in shrink_zone only if the whole hierarchy has been visited or sufficient pages have been reclaimed. This is also more natural because the reclaimer expects that the hierarchy under the given root is reclaimed. As a result we can simplify the soft limit reclaim which does its own iteration. [yinghan@google.com: break out of the hierarchy loop only if nr_reclaimed exceeded nr_to_reclaim] [akpm@linux-foundation.org: use conventional comparison order] Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Ying Han <yinghan@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 07:32:30 +07:00
*
* Limit reclaim, on the other hand, only cares about
* nr_to_reclaim pages to be reclaimed and it will
* retry with decreasing priority if one round over the
* whole hierarchy is not sufficient.
2013-02-23 07:32:19 +07:00
*/
memcg,vmscan: do not break out targeted reclaim without reclaimed pages Targeted (hard resp soft) reclaim has traditionally tried to scan one group with decreasing priority until nr_to_reclaim (SWAP_CLUSTER_MAX pages) is reclaimed or all priorities are exhausted. The reclaim is then retried until the limit is met. This approach, however, doesn't work well with deeper hierarchies where groups higher in the hierarchy do not have any or only very few pages (this usually happens if those groups do not have any tasks and they have only re-parented pages after some of their children is removed). Those groups are reclaimed with decreasing priority pointlessly as there is nothing to reclaim from them. An easiest fix is to break out of the memcg iteration loop in shrink_zone only if the whole hierarchy has been visited or sufficient pages have been reclaimed. This is also more natural because the reclaimer expects that the hierarchy under the given root is reclaimed. As a result we can simplify the soft limit reclaim which does its own iteration. [yinghan@google.com: break out of the hierarchy loop only if nr_reclaimed exceeded nr_to_reclaim] [akpm@linux-foundation.org: use conventional comparison order] Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Ying Han <yinghan@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 07:32:30 +07:00
if (!global_reclaim(sc) &&
sc->nr_reclaimed >= sc->nr_to_reclaim) {
2013-02-23 07:32:19 +07:00
mem_cgroup_iter_break(root, memcg);
break;
}
mm: memcontrol: default hierarchy interface for memory Introduce the basic control files to account, partition, and limit memory using cgroups in default hierarchy mode. This interface versioning allows us to address fundamental design issues in the existing memory cgroup interface, further explained below. The old interface will be maintained indefinitely, but a clearer model and improved workload performance should encourage existing users to switch over to the new one eventually. The control files are thus: - memory.current shows the current consumption of the cgroup and its descendants, in bytes. - memory.low configures the lower end of the cgroup's expected memory consumption range. The kernel considers memory below that boundary to be a reserve - the minimum that the workload needs in order to make forward progress - and generally avoids reclaiming it, unless there is an imminent risk of entering an OOM situation. - memory.high configures the upper end of the cgroup's expected memory consumption range. A cgroup whose consumption grows beyond this threshold is forced into direct reclaim, to work off the excess and to throttle new allocations heavily, but is generally allowed to continue and the OOM killer is not invoked. - memory.max configures the hard maximum amount of memory that the cgroup is allowed to consume before the OOM killer is invoked. - memory.events shows event counters that indicate how often the cgroup was reclaimed while below memory.low, how often it was forced to reclaim excess beyond memory.high, how often it hit memory.max, and how often it entered OOM due to memory.max. This allows users to identify configuration problems when observing a degradation in workload performance. An overcommitted system will have an increased rate of low boundary breaches, whereas increased rates of high limit breaches, maximum hits, or even OOM situations will indicate internally overcommitted cgroups. For existing users of memory cgroups, the following deviations from the current interface are worth pointing out and explaining: - The original lower boundary, the soft limit, is defined as a limit that is per default unset. As a result, the set of cgroups that global reclaim prefers is opt-in, rather than opt-out. The costs for optimizing these mostly negative lookups are so high that the implementation, despite its enormous size, does not even provide the basic desirable behavior. First off, the soft limit has no hierarchical meaning. All configured groups are organized in a global rbtree and treated like equal peers, regardless where they are located in the hierarchy. This makes subtree delegation impossible. Second, the soft limit reclaim pass is so aggressive that it not just introduces high allocation latencies into the system, but also impacts system performance due to overreclaim, to the point where the feature becomes self-defeating. The memory.low boundary on the other hand is a top-down allocated reserve. A cgroup enjoys reclaim protection when it and all its ancestors are below their low boundaries, which makes delegation of subtrees possible. Secondly, new cgroups have no reserve per default and in the common case most cgroups are eligible for the preferred reclaim pass. This allows the new low boundary to be efficiently implemented with just a minor addition to the generic reclaim code, without the need for out-of-band data structures and reclaim passes. Because the generic reclaim code considers all cgroups except for the ones running low in the preferred first reclaim pass, overreclaim of individual groups is eliminated as well, resulting in much better overall workload performance. - The original high boundary, the hard limit, is defined as a strict limit that can not budge, even if the OOM killer has to be called. But this generally goes against the goal of making the most out of the available memory. The memory consumption of workloads varies during runtime, and that requires users to overcommit. But doing that with a strict upper limit requires either a fairly accurate prediction of the working set size or adding slack to the limit. Since working set size estimation is hard and error prone, and getting it wrong results in OOM kills, most users tend to err on the side of a looser limit and end up wasting precious resources. The memory.high boundary on the other hand can be set much more conservatively. When hit, it throttles allocations by forcing them into direct reclaim to work off the excess, but it never invokes the OOM killer. As a result, a high boundary that is chosen too aggressively will not terminate the processes, but instead it will lead to gradual performance degradation. The user can monitor this and make corrections until the minimal memory footprint that still gives acceptable performance is found. In extreme cases, with many concurrent allocations and a complete breakdown of reclaim progress within the group, the high boundary can be exceeded. But even then it's mostly better to satisfy the allocation from the slack available in other groups or the rest of the system than killing the group. Otherwise, memory.max is there to limit this type of spillover and ultimately contain buggy or even malicious applications. - The original control file names are unwieldy and inconsistent in many different ways. For example, the upper boundary hit count is exported in the memory.failcnt file, but an OOM event count has to be manually counted by listening to memory.oom_control events, and lower boundary / soft limit events have to be counted by first setting a threshold for that value and then counting those events. Also, usage and limit files encode their units in the filename. That makes the filenames very long, even though this is not information that a user needs to be reminded of every time they type out those names. To address these naming issues, as well as to signal clearly that the new interface carries a new configuration model, the naming conventions in it necessarily differ from the old interface. - The original limit files indicate the state of an unset limit with a very high number, and a configured limit can be unset by echoing -1 into those files. But that very high number is implementation and architecture dependent and not very descriptive. And while -1 can be understood as an underflow into the highest possible value, -2 or -10M etc. do not work, so it's not inconsistent. memory.low, memory.high, and memory.max will use the string "infinity" to indicate and set the highest possible value. [akpm@linux-foundation.org: use seq_puts() for basic strings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:06 +07:00
} while ((memcg = mem_cgroup_iter(root, memcg, &reclaim)));
memcg: add memory.pressure_level events With this patch userland applications that want to maintain the interactivity/memory allocation cost can use the pressure level notifications. The levels are defined like this: The "low" level means that the system is reclaiming memory for new allocations. Monitoring this reclaiming activity might be useful for maintaining cache level. Upon notification, the program (typically "Activity Manager") might analyze vmstat and act in advance (i.e. prematurely shutdown unimportant services). The "medium" level means that the system is experiencing medium memory pressure, the system might be making swap, paging out active file caches, etc. Upon this event applications may decide to further analyze vmstat/zoneinfo/memcg or internal memory usage statistics and free any resources that can be easily reconstructed or re-read from a disk. The "critical" level means that the system is actively thrashing, it is about to out of memory (OOM) or even the in-kernel OOM killer is on its way to trigger. Applications should do whatever they can to help the system. It might be too late to consult with vmstat or any other statistics, so it's advisable to take an immediate action. The events are propagated upward until the event is handled, i.e. the events are not pass-through. Here is what this means: for example you have three cgroups: A->B->C. Now you set up an event listener on cgroups A, B and C, and suppose group C experiences some pressure. In this situation, only group C will receive the notification, i.e. groups A and B will not receive it. This is done to avoid excessive "broadcasting" of messages, which disturbs the system and which is especially bad if we are low on memory or thrashing. So, organize the cgroups wisely, or propagate the events manually (or, ask us to implement the pass-through events, explaining why would you need them.) Performance wise, the memory pressure notifications feature itself is lightweight and does not require much of bookkeeping, in contrast to the rest of memcg features. Unfortunately, as of current memcg implementation, pages accounting is an inseparable part and cannot be turned off. The good news is that there are some efforts[1] to improve the situation; plus, implementing the same, fully API-compatible[2] interface for CONFIG_MEMCG=n case (e.g. embedded) is also a viable option, so it will not require any changes on the userland side. [1] http://permalink.gmane.org/gmane.linux.kernel.cgroups/6291 [2] http://lkml.org/lkml/2013/2/21/454 [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_CGROPUPS=n warnings] Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Glauber Costa <glommer@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Leonid Moiseichuk <leonid.moiseichuk@nokia.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 05:08:31 +07:00
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
/*
* Shrink the slab caches in the same proportion that
* the eligible LRU pages were scanned.
*/
if (global_reclaim(sc))
shrink_slab(sc->gfp_mask, pgdat->node_id, NULL,
sc->nr_scanned - nr_scanned,
node_lru_pages);
if (reclaim_state) {
sc->nr_reclaimed += reclaim_state->reclaimed_slab;
reclaim_state->reclaimed_slab = 0;
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
}
/* Record the subtree's reclaim efficiency */
vmpressure(sc->gfp_mask, sc->target_mem_cgroup, true,
memcg: add memory.pressure_level events With this patch userland applications that want to maintain the interactivity/memory allocation cost can use the pressure level notifications. The levels are defined like this: The "low" level means that the system is reclaiming memory for new allocations. Monitoring this reclaiming activity might be useful for maintaining cache level. Upon notification, the program (typically "Activity Manager") might analyze vmstat and act in advance (i.e. prematurely shutdown unimportant services). The "medium" level means that the system is experiencing medium memory pressure, the system might be making swap, paging out active file caches, etc. Upon this event applications may decide to further analyze vmstat/zoneinfo/memcg or internal memory usage statistics and free any resources that can be easily reconstructed or re-read from a disk. The "critical" level means that the system is actively thrashing, it is about to out of memory (OOM) or even the in-kernel OOM killer is on its way to trigger. Applications should do whatever they can to help the system. It might be too late to consult with vmstat or any other statistics, so it's advisable to take an immediate action. The events are propagated upward until the event is handled, i.e. the events are not pass-through. Here is what this means: for example you have three cgroups: A->B->C. Now you set up an event listener on cgroups A, B and C, and suppose group C experiences some pressure. In this situation, only group C will receive the notification, i.e. groups A and B will not receive it. This is done to avoid excessive "broadcasting" of messages, which disturbs the system and which is especially bad if we are low on memory or thrashing. So, organize the cgroups wisely, or propagate the events manually (or, ask us to implement the pass-through events, explaining why would you need them.) Performance wise, the memory pressure notifications feature itself is lightweight and does not require much of bookkeeping, in contrast to the rest of memcg features. Unfortunately, as of current memcg implementation, pages accounting is an inseparable part and cannot be turned off. The good news is that there are some efforts[1] to improve the situation; plus, implementing the same, fully API-compatible[2] interface for CONFIG_MEMCG=n case (e.g. embedded) is also a viable option, so it will not require any changes on the userland side. [1] http://permalink.gmane.org/gmane.linux.kernel.cgroups/6291 [2] http://lkml.org/lkml/2013/2/21/454 [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_CGROPUPS=n warnings] Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Glauber Costa <glommer@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Leonid Moiseichuk <leonid.moiseichuk@nokia.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 05:08:31 +07:00
sc->nr_scanned - nr_scanned,
sc->nr_reclaimed - nr_reclaimed);
if (sc->nr_reclaimed - nr_reclaimed)
reclaimable = true;
} while (should_continue_reclaim(pgdat, sc->nr_reclaimed - nr_reclaimed,
2013-02-23 07:32:19 +07:00
sc->nr_scanned - nr_scanned, sc));
return reclaimable;
}
mm, compaction: defer each zone individually instead of preferred zone When direct sync compaction is often unsuccessful, it may become deferred for some time to avoid further useless attempts, both sync and async. Successful high-order allocations un-defer compaction, while further unsuccessful compaction attempts prolong the compaction deferred period. Currently the checking and setting deferred status is performed only on the preferred zone of the allocation that invoked direct compaction. But compaction itself is attempted on all eligible zones in the zonelist, so the behavior is suboptimal and may lead both to scenarios where 1) compaction is attempted uselessly, or 2) where it's not attempted despite good chances of succeeding, as shown on the examples below: 1) A direct compaction with Normal preferred zone failed and set deferred compaction for the Normal zone. Another unrelated direct compaction with DMA32 as preferred zone will attempt to compact DMA32 zone even though the first compaction attempt also included DMA32 zone. In another scenario, compaction with Normal preferred zone failed to compact Normal zone, but succeeded in the DMA32 zone, so it will not defer compaction. In the next attempt, it will try Normal zone which will fail again, instead of skipping Normal zone and trying DMA32 directly. 2) Kswapd will balance DMA32 zone and reset defer status based on watermarks looking good. A direct compaction with preferred Normal zone will skip compaction of all zones including DMA32 because Normal was still deferred. The allocation might have succeeded in DMA32, but won't. This patch makes compaction deferring work on individual zone basis instead of preferred zone. For each zone, it checks compaction_deferred() to decide if the zone should be skipped. If watermarks fail after compacting the zone, defer_compaction() is called. The zone where watermarks passed can still be deferred when the allocation attempt is unsuccessful. When allocation is successful, compaction_defer_reset() is called for the zone containing the allocated page. This approach should approximate calling defer_compaction() only on zones where compaction was attempted and did not yield allocated page. There might be corner cases but that is inevitable as long as the decision to stop compacting dues not guarantee that a page will be allocated. Due to a new COMPACT_DEFERRED return value, some functions relying implicitly on COMPACT_SKIPPED = 0 had to be updated, with comments made more accurate. The did_some_progress output parameter of __alloc_pages_direct_compact() is removed completely, as the caller actually does not use it after compaction sets it - it is only considered when direct reclaim sets it. During testing on a two-node machine with a single very small Normal zone on node 1, this patch has improved success rates in stress-highalloc mmtests benchmark. The success here were previously made worse by commit 3a025760fc15 ("mm: page_alloc: spill to remote nodes before waking kswapd") as kswapd was no longer resetting often enough the deferred compaction for the Normal zone, and DMA32 zones on both nodes were thus not considered for compaction. On different machine, success rates were improved with __GFP_NO_KSWAPD allocations. [akpm@linux-foundation.org: fix CONFIG_COMPACTION=n build] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 05:27:02 +07:00
/*
* Returns true if compaction should go ahead for a high-order request, or
* the high-order allocation would succeed without compaction.
*/
static inline bool compaction_ready(struct zone *zone, struct scan_control *sc)
mm: vmscan: when reclaiming for compaction, ensure there are sufficient free pages available In commit e0887c19 ("vmscan: limit direct reclaim for higher order allocations"), Rik noted that reclaim was too aggressive when THP was enabled. In his initial patch he used the number of free pages to decide if reclaim should abort for compaction. My feedback was that reclaim and compaction should be using the same logic when deciding if reclaim should be aborted. Unfortunately, this had the effect of reducing THP success rates when the workload included something like streaming reads that continually allocated pages. The window during which compaction could run and return a THP was too small. This patch combines Rik's two patches together. compaction_suitable() is still used to decide if reclaim should be aborted to allow compaction is used. However, it will also ensure that there is a reasonable buffer of free pages available. This improves upon the THP allocation success rates but bounds the number of pages that are freed for compaction. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel<riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:45 +07:00
{
unsigned long watermark;
mm: vmscan: when reclaiming for compaction, ensure there are sufficient free pages available In commit e0887c19 ("vmscan: limit direct reclaim for higher order allocations"), Rik noted that reclaim was too aggressive when THP was enabled. In his initial patch he used the number of free pages to decide if reclaim should abort for compaction. My feedback was that reclaim and compaction should be using the same logic when deciding if reclaim should be aborted. Unfortunately, this had the effect of reducing THP success rates when the workload included something like streaming reads that continually allocated pages. The window during which compaction could run and return a THP was too small. This patch combines Rik's two patches together. compaction_suitable() is still used to decide if reclaim should be aborted to allow compaction is used. However, it will also ensure that there is a reasonable buffer of free pages available. This improves upon the THP allocation success rates but bounds the number of pages that are freed for compaction. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel<riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:45 +07:00
bool watermark_ok;
/*
* Compaction takes time to run and there are potentially other
* callers using the pages just freed. Continue reclaiming until
* there is a buffer of free pages available to give compaction
* a reasonable chance of completing and allocating the page
*/
watermark = high_wmark_pages(zone) + (2UL << sc->order);
watermark_ok = zone_watermark_ok_safe(zone, 0, watermark, sc->reclaim_idx);
mm: vmscan: when reclaiming for compaction, ensure there are sufficient free pages available In commit e0887c19 ("vmscan: limit direct reclaim for higher order allocations"), Rik noted that reclaim was too aggressive when THP was enabled. In his initial patch he used the number of free pages to decide if reclaim should abort for compaction. My feedback was that reclaim and compaction should be using the same logic when deciding if reclaim should be aborted. Unfortunately, this had the effect of reducing THP success rates when the workload included something like streaming reads that continually allocated pages. The window during which compaction could run and return a THP was too small. This patch combines Rik's two patches together. compaction_suitable() is still used to decide if reclaim should be aborted to allow compaction is used. However, it will also ensure that there is a reasonable buffer of free pages available. This improves upon the THP allocation success rates but bounds the number of pages that are freed for compaction. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel<riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:45 +07:00
/*
* If compaction is deferred, reclaim up to a point where
* compaction will have a chance of success when re-enabled
*/
if (compaction_deferred(zone, sc->order))
mm: vmscan: when reclaiming for compaction, ensure there are sufficient free pages available In commit e0887c19 ("vmscan: limit direct reclaim for higher order allocations"), Rik noted that reclaim was too aggressive when THP was enabled. In his initial patch he used the number of free pages to decide if reclaim should abort for compaction. My feedback was that reclaim and compaction should be using the same logic when deciding if reclaim should be aborted. Unfortunately, this had the effect of reducing THP success rates when the workload included something like streaming reads that continually allocated pages. The window during which compaction could run and return a THP was too small. This patch combines Rik's two patches together. compaction_suitable() is still used to decide if reclaim should be aborted to allow compaction is used. However, it will also ensure that there is a reasonable buffer of free pages available. This improves upon the THP allocation success rates but bounds the number of pages that are freed for compaction. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel<riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:45 +07:00
return watermark_ok;
mm, compaction: defer each zone individually instead of preferred zone When direct sync compaction is often unsuccessful, it may become deferred for some time to avoid further useless attempts, both sync and async. Successful high-order allocations un-defer compaction, while further unsuccessful compaction attempts prolong the compaction deferred period. Currently the checking and setting deferred status is performed only on the preferred zone of the allocation that invoked direct compaction. But compaction itself is attempted on all eligible zones in the zonelist, so the behavior is suboptimal and may lead both to scenarios where 1) compaction is attempted uselessly, or 2) where it's not attempted despite good chances of succeeding, as shown on the examples below: 1) A direct compaction with Normal preferred zone failed and set deferred compaction for the Normal zone. Another unrelated direct compaction with DMA32 as preferred zone will attempt to compact DMA32 zone even though the first compaction attempt also included DMA32 zone. In another scenario, compaction with Normal preferred zone failed to compact Normal zone, but succeeded in the DMA32 zone, so it will not defer compaction. In the next attempt, it will try Normal zone which will fail again, instead of skipping Normal zone and trying DMA32 directly. 2) Kswapd will balance DMA32 zone and reset defer status based on watermarks looking good. A direct compaction with preferred Normal zone will skip compaction of all zones including DMA32 because Normal was still deferred. The allocation might have succeeded in DMA32, but won't. This patch makes compaction deferring work on individual zone basis instead of preferred zone. For each zone, it checks compaction_deferred() to decide if the zone should be skipped. If watermarks fail after compacting the zone, defer_compaction() is called. The zone where watermarks passed can still be deferred when the allocation attempt is unsuccessful. When allocation is successful, compaction_defer_reset() is called for the zone containing the allocated page. This approach should approximate calling defer_compaction() only on zones where compaction was attempted and did not yield allocated page. There might be corner cases but that is inevitable as long as the decision to stop compacting dues not guarantee that a page will be allocated. Due to a new COMPACT_DEFERRED return value, some functions relying implicitly on COMPACT_SKIPPED = 0 had to be updated, with comments made more accurate. The did_some_progress output parameter of __alloc_pages_direct_compact() is removed completely, as the caller actually does not use it after compaction sets it - it is only considered when direct reclaim sets it. During testing on a two-node machine with a single very small Normal zone on node 1, this patch has improved success rates in stress-highalloc mmtests benchmark. The success here were previously made worse by commit 3a025760fc15 ("mm: page_alloc: spill to remote nodes before waking kswapd") as kswapd was no longer resetting often enough the deferred compaction for the Normal zone, and DMA32 zones on both nodes were thus not considered for compaction. On different machine, success rates were improved with __GFP_NO_KSWAPD allocations. [akpm@linux-foundation.org: fix CONFIG_COMPACTION=n build] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 05:27:02 +07:00
/*
* If compaction is not ready to start and allocation is not likely
* to succeed without it, then keep reclaiming.
*/
if (compaction_suitable(zone, sc->order, 0, sc->reclaim_idx) == COMPACT_SKIPPED)
mm: vmscan: when reclaiming for compaction, ensure there are sufficient free pages available In commit e0887c19 ("vmscan: limit direct reclaim for higher order allocations"), Rik noted that reclaim was too aggressive when THP was enabled. In his initial patch he used the number of free pages to decide if reclaim should abort for compaction. My feedback was that reclaim and compaction should be using the same logic when deciding if reclaim should be aborted. Unfortunately, this had the effect of reducing THP success rates when the workload included something like streaming reads that continually allocated pages. The window during which compaction could run and return a THP was too small. This patch combines Rik's two patches together. compaction_suitable() is still used to decide if reclaim should be aborted to allow compaction is used. However, it will also ensure that there is a reasonable buffer of free pages available. This improves upon the THP allocation success rates but bounds the number of pages that are freed for compaction. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel<riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13 08:19:45 +07:00
return false;
return watermark_ok;
}
/*
* This is the direct reclaim path, for page-allocating processes. We only
* try to reclaim pages from zones which will satisfy the caller's allocation
* request.
*
* If a zone is deemed to be full of pinned pages then just give it a light
* scan then give up on it.
*/
mm, oom: rework oom detection __alloc_pages_slowpath has traditionally relied on the direct reclaim and did_some_progress as an indicator that it makes sense to retry allocation rather than declaring OOM. shrink_zones had to rely on zone_reclaimable if shrink_zone didn't make any progress to prevent from a premature OOM killer invocation - the LRU might be full of dirty or writeback pages and direct reclaim cannot clean those up. zone_reclaimable allows to rescan the reclaimable lists several times and restart if a page is freed. This is really subtle behavior and it might lead to a livelock when a single freed page keeps allocator looping but the current task will not be able to allocate that single page. OOM killer would be more appropriate than looping without any progress for unbounded amount of time. This patch changes OOM detection logic and pulls it out from shrink_zone which is too low to be appropriate for any high level decisions such as OOM which is per zonelist property. It is __alloc_pages_slowpath which knows how many attempts have been done and what was the progress so far therefore it is more appropriate to implement this logic. The new heuristic is implemented in should_reclaim_retry helper called from __alloc_pages_slowpath. It tries to be more deterministic and easier to follow. It builds on an assumption that retrying makes sense only if the currently reclaimable memory + free pages would allow the current allocation request to succeed (as per __zone_watermark_ok) at least for one zone in the usable zonelist. This alone wouldn't be sufficient, though, because the writeback might get stuck and reclaimable pages might be pinned for a really long time or even depend on the current allocation context. Therefore there is a backoff mechanism implemented which reduces the reclaim target after each reclaim round without any progress. This means that we should eventually converge to only NR_FREE_PAGES as the target and fail on the wmark check and proceed to OOM. The backoff is simple and linear with 1/16 of the reclaimable pages for each round without any progress. We are optimistic and reset counter for successful reclaim rounds. Costly high order pages mostly preserve their semantic and those without __GFP_REPEAT fail right away while those which have the flag set will back off after the amount of reclaimable pages reaches equivalent of the requested order. The only difference is that if there was no progress during the reclaim we rely on zone watermark check. This is more logical thing to do than previous 1<<order attempts which were a result of zone_reclaimable faking the progress. [vdavydov@virtuozzo.com: check classzone_idx for shrink_zone] [hannes@cmpxchg.org: separate the heuristic into should_reclaim_retry] [rientjes@google.com: use zone_page_state_snapshot for NR_FREE_PAGES] [rientjes@google.com: shrink_zones doesn't need to return anything] Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-21 06:57:00 +07:00
static void shrink_zones(struct zonelist *zonelist, struct scan_control *sc)
{
mm: have zonelist contains structs with both a zone pointer and zone_idx Filtering zonelists requires very frequent use of zone_idx(). This is costly as it involves a lookup of another structure and a substraction operation. As the zone_idx is often required, it should be quickly accessible. The node idx could also be stored here if it was found that accessing zone->node is significant which may be the case on workloads where nodemasks are heavily used. This patch introduces a struct zoneref to store a zone pointer and a zone index. The zonelist then consists of an array of these struct zonerefs which are looked up as necessary. Helpers are given for accessing the zone index as well as the node index. [kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers] [hugh@veritas.com: mm-have-zonelist: fix memcg ooms] [hugh@veritas.com: just return do_try_to_free_pages] [hugh@veritas.com: do_try_to_free_pages gfp_mask redundant] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:12:17 +07:00
struct zoneref *z;
struct zone *zone;
unsigned long nr_soft_reclaimed;
unsigned long nr_soft_scanned;
gfp_t orig_mask;
pg_data_t *last_pgdat = NULL;
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 15:14:37 +07:00
mm: vmscan: forcibly scan highmem if there are too many buffer_heads pinning highmem Stuart Foster reported on bugzilla that copying large amounts of data from NTFS caused an OOM kill on 32-bit X86 with 16G of memory. Andrew Morton correctly identified that the problem was NTFS was using 512 blocks meaning each page had 8 buffer_heads in low memory pinning it. In the past, direct reclaim used to scan highmem even if the allocating process did not specify __GFP_HIGHMEM but not any more. kswapd no longer will reclaim from zones that are above the high watermark. The intention in both cases was to minimise unnecessary reclaim. The downside is on machines with large amounts of highmem that lowmem can be fully consumed by buffer_heads with nothing trying to free them. The following patch is based on a suggestion by Andrew Morton to extend the buffer_heads_over_limit case to force kswapd and direct reclaim to scan the highmem zone regardless of the allocation request or watermarks. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42578 [hughd@google.com: move buffer_heads_over_limit check up] [akpm@linux-foundation.org: buffer_heads_over_limit is unlikely] Reported-by: Stuart Foster <smf.linux@ntlworld.com> Tested-by: Stuart Foster <smf.linux@ntlworld.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:00 +07:00
/*
* If the number of buffer_heads in the machine exceeds the maximum
* allowed level, force direct reclaim to scan the highmem zone as
* highmem pages could be pinning lowmem pages storing buffer_heads
*/
orig_mask = sc->gfp_mask;
if (buffer_heads_over_limit) {
mm: vmscan: forcibly scan highmem if there are too many buffer_heads pinning highmem Stuart Foster reported on bugzilla that copying large amounts of data from NTFS caused an OOM kill on 32-bit X86 with 16G of memory. Andrew Morton correctly identified that the problem was NTFS was using 512 blocks meaning each page had 8 buffer_heads in low memory pinning it. In the past, direct reclaim used to scan highmem even if the allocating process did not specify __GFP_HIGHMEM but not any more. kswapd no longer will reclaim from zones that are above the high watermark. The intention in both cases was to minimise unnecessary reclaim. The downside is on machines with large amounts of highmem that lowmem can be fully consumed by buffer_heads with nothing trying to free them. The following patch is based on a suggestion by Andrew Morton to extend the buffer_heads_over_limit case to force kswapd and direct reclaim to scan the highmem zone regardless of the allocation request or watermarks. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42578 [hughd@google.com: move buffer_heads_over_limit check up] [akpm@linux-foundation.org: buffer_heads_over_limit is unlikely] Reported-by: Stuart Foster <smf.linux@ntlworld.com> Tested-by: Stuart Foster <smf.linux@ntlworld.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:00 +07:00
sc->gfp_mask |= __GFP_HIGHMEM;
sc->reclaim_idx = gfp_zone(sc->gfp_mask);
}
mm: vmscan: forcibly scan highmem if there are too many buffer_heads pinning highmem Stuart Foster reported on bugzilla that copying large amounts of data from NTFS caused an OOM kill on 32-bit X86 with 16G of memory. Andrew Morton correctly identified that the problem was NTFS was using 512 blocks meaning each page had 8 buffer_heads in low memory pinning it. In the past, direct reclaim used to scan highmem even if the allocating process did not specify __GFP_HIGHMEM but not any more. kswapd no longer will reclaim from zones that are above the high watermark. The intention in both cases was to minimise unnecessary reclaim. The downside is on machines with large amounts of highmem that lowmem can be fully consumed by buffer_heads with nothing trying to free them. The following patch is based on a suggestion by Andrew Morton to extend the buffer_heads_over_limit case to force kswapd and direct reclaim to scan the highmem zone regardless of the allocation request or watermarks. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42578 [hughd@google.com: move buffer_heads_over_limit check up] [akpm@linux-foundation.org: buffer_heads_over_limit is unlikely] Reported-by: Stuart Foster <smf.linux@ntlworld.com> Tested-by: Stuart Foster <smf.linux@ntlworld.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:00 +07:00
for_each_zone_zonelist_nodemask(zone, z, zonelist,
sc->reclaim_idx, sc->nodemask) {
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 15:14:37 +07:00
/*
* Take care memory controller reclaiming has small influence
* to global LRU.
*/
if (global_reclaim(sc)) {
if (!cpuset_zone_allowed(zone,
GFP_KERNEL | __GFP_HARDWALL))
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 15:14:37 +07:00
continue;
mm: vmscan: fix do_try_to_free_pages() livelock This patch is based on KOSAKI's work and I add a little more description, please refer https://lkml.org/lkml/2012/6/14/74. Currently, I found system can enter a state that there are lots of free pages in a zone but only order-0 and order-1 pages which means the zone is heavily fragmented, then high order allocation could make direct reclaim path's long stall(ex, 60 seconds) especially in no swap and no compaciton enviroment. This problem happened on v3.4, but it seems issue still lives in current tree, the reason is do_try_to_free_pages enter live lock: kswapd will go to sleep if the zones have been fully scanned and are still not balanced. As kswapd thinks there's little point trying all over again to avoid infinite loop. Instead it changes order from high-order to 0-order because kswapd think order-0 is the most important. Look at 73ce02e9 in detail. If watermarks are ok, kswapd will go back to sleep and may leave zone->all_unreclaimable =3D 0. It assume high-order users can still perform direct reclaim if they wish. Direct reclaim continue to reclaim for a high order which is not a COSTLY_ORDER without oom-killer until kswapd turn on zone->all_unreclaimble= . This is because to avoid too early oom-kill. So it means direct_reclaim depends on kswapd to break this loop. In worst case, direct-reclaim may continue to page reclaim forever when kswapd sleeps forever until someone like watchdog detect and finally kill the process. As described in: http://thread.gmane.org/gmane.linux.kernel.mm/103737 We can't turn on zone->all_unreclaimable from direct reclaim path because direct reclaim path don't take any lock and this way is racy. Thus this patch removes zone->all_unreclaimable field completely and recalculates zone reclaimable state every time. Note: we can't take the idea that direct-reclaim see zone->pages_scanned directly and kswapd continue to use zone->all_unreclaimable. Because, it is racy. commit 929bea7c71 (vmscan: all_unreclaimable() use zone->all_unreclaimable as a name) describes the detail. [akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()] Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Nick Piggin <npiggin@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Neil Zhang <zhangwm@marvell.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Lisa Du <cldu@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 04:22:36 +07:00
if (sc->priority != DEF_PRIORITY &&
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
!pgdat_reclaimable(zone->zone_pgdat))
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 15:14:37 +07:00
continue; /* Let kswapd poll it */
/*
* If we already have plenty of memory free for
* compaction in this zone, don't free any more.
* Even though compaction is invoked for any
* non-zero order, only frequent costly order
* reclamation is disruptive enough to become a
* noticeable problem, like transparent huge
* page allocations.
*/
if (IS_ENABLED(CONFIG_COMPACTION) &&
sc->order > PAGE_ALLOC_COSTLY_ORDER &&
compaction_ready(zone, sc)) {
sc->compaction_ready = true;
continue;
}
/*
* Shrink each node in the zonelist once. If the
* zonelist is ordered by zone (not the default) then a
* node may be shrunk multiple times but in that case
* the user prefers lower zones being preserved.
*/
if (zone->zone_pgdat == last_pgdat)
continue;
/*
* This steals pages from memory cgroups over softlimit
* and returns the number of reclaimed pages and
* scanned pages. This works for global memory pressure
* and balancing, not for a memcg's limit.
*/
nr_soft_scanned = 0;
nr_soft_reclaimed = mem_cgroup_soft_limit_reclaim(zone->zone_pgdat,
sc->order, sc->gfp_mask,
&nr_soft_scanned);
sc->nr_reclaimed += nr_soft_reclaimed;
sc->nr_scanned += nr_soft_scanned;
/* need some check for avoid more shrink_zone() */
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 15:14:37 +07:00
}
/* See comment about same check for global reclaim above */
if (zone->zone_pgdat == last_pgdat)
continue;
last_pgdat = zone->zone_pgdat;
shrink_node(zone->zone_pgdat, sc);
}
/*
* Restore to original mask to avoid the impact on the caller if we
* promoted it to __GFP_HIGHMEM.
*/
sc->gfp_mask = orig_mask;
}
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
/*
* This is the main entry point to direct page reclaim.
*
* If a full scan of the inactive list fails to free enough memory then we
* are "out of memory" and something needs to be killed.
*
* If the caller is !__GFP_FS then the probability of a failure is reasonably
* high - the zone may be full of dirty or under-writeback pages, which this
* caller can't do much about. We kick the writeback threads and take explicit
* naps in the hope that some of these pages can be written. But if the
* allocating task holds filesystem locks which prevent writeout this might not
* work, and the allocation attempt will fail.
page allocator: smarter retry of costly-order allocations Because of page order checks in __alloc_pages(), hugepage (and similarly large order) allocations will not retry unless explicitly marked __GFP_REPEAT. However, the current retry logic is nearly an infinite loop (or until reclaim does no progress whatsoever). For these costly allocations, that seems like overkill and could potentially never terminate. Mel observed that allowing current __GFP_REPEAT semantics for hugepage allocations essentially killed the system. I believe this is because we may continue to reclaim small orders of pages all over, but never have enough to satisfy the hugepage allocation request. This is clearly only a problem for large order allocations, of which hugepages are the most obvious (to me). Modify try_to_free_pages() to indicate how many pages were reclaimed. Use that information in __alloc_pages() to eventually fail a large __GFP_REPEAT allocation when we've reclaimed an order of pages equal to or greater than the allocation's order. This relies on lumpy reclaim functioning as advertised. Due to fragmentation, lumpy reclaim may not be able to free up the order needed in one invocation, so multiple iterations may be requred. In other words, the more fragmented memory is, the more retry attempts __GFP_REPEAT will make (particularly for higher order allocations). This changes the semantics of __GFP_REPEAT subtly, but *only* for allocations > PAGE_ALLOC_COSTLY_ORDER. With this patch, for those size allocations, we will try up to some point (at least 1<<order reclaimed pages), rather than forever (which is the case for allocations <= PAGE_ALLOC_COSTLY_ORDER). This change improves the /proc/sys/vm/nr_hugepages interface with a follow-on patch that makes pool allocations use __GFP_REPEAT. Rather than administrators repeatedly echo'ing a particular value into the sysctl, and forcing reclaim into action manually, this change allows for the sysctl to attempt a reasonable effort itself. Similarly, dynamic pool growth should be more successful under load, as lumpy reclaim can try to free up pages, rather than failing right away. Choosing to reclaim only up to the order of the requested allocation strikes a balance between not failing hugepage allocations and returning to the caller when it's unlikely to every succeed. Because of lumpy reclaim, if we have freed the order requested, hopefully it has been in big chunks and those chunks will allow our allocation to succeed. If that isn't the case after freeing up the current order, I don't think it is likely to succeed in the future, although it is possible given a particular fragmentation pattern. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Tested-by: Mel Gorman <mel@csn.ul.ie> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 14:58:25 +07:00
*
* returns: 0, if no pages reclaimed
* else, the number of pages reclaimed
*/
mm: use zonelists instead of zones when direct reclaiming pages The following patches replace multiple zonelists per node with two zonelists that are filtered based on the GFP flags. The patches as a set fix a bug with regard to the use of MPOL_BIND and ZONE_MOVABLE. With this patchset, the MPOL_BIND will apply to the two highest zones when the highest zone is ZONE_MOVABLE. This should be considered as an alternative fix for the MPOL_BIND+ZONE_MOVABLE in 2.6.23 to the previously discussed hack that filters only custom zonelists. The first patch cleans up an inconsistency where direct reclaim uses zonelist->zones where other places use zonelist. The second patch introduces a helper function node_zonelist() for looking up the appropriate zonelist for a GFP mask which simplifies patches later in the set. The third patch defines/remembers the "preferred zone" for numa statistics, as it is no longer always the first zone in a zonelist. The forth patch replaces multiple zonelists with two zonelists that are filtered. The two zonelists are due to the fact that the memoryless patchset introduces a second set of zonelists for __GFP_THISNODE. The fifth patch introduces helper macros for retrieving the zone and node indices of entries in a zonelist. The final patch introduces filtering of the zonelists based on a nodemask. Two zonelists exist per node, one for normal allocations and one for __GFP_THISNODE. Performance results varied depending on the machine configuration. In real workloads the gain/loss will depend on how much the userspace portion of the benchmark benefits from having more cache available due to reduced referencing of zonelists. These are the range of performance losses/gains when running against 2.6.24-rc4-mm1. The set and these machines are a mix of i386, x86_64 and ppc64 both NUMA and non-NUMA. loss to gain Total CPU time on Kernbench: -0.86% to 1.13% Elapsed time on Kernbench: -0.79% to 0.76% page_test from aim9: -4.37% to 0.79% brk_test from aim9: -0.71% to 4.07% fork_test from aim9: -1.84% to 4.60% exec_test from aim9: -0.71% to 1.08% This patch: The allocator deals with zonelists which indicate the order in which zones should be targeted for an allocation. Similarly, direct reclaim of pages iterates over an array of zones. For consistency, this patch converts direct reclaim to use a zonelist. No functionality is changed by this patch. This simplifies zonelist iterators in the next patch. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:12:12 +07:00
static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
struct scan_control *sc)
{
mm: memcontrol: default hierarchy interface for memory Introduce the basic control files to account, partition, and limit memory using cgroups in default hierarchy mode. This interface versioning allows us to address fundamental design issues in the existing memory cgroup interface, further explained below. The old interface will be maintained indefinitely, but a clearer model and improved workload performance should encourage existing users to switch over to the new one eventually. The control files are thus: - memory.current shows the current consumption of the cgroup and its descendants, in bytes. - memory.low configures the lower end of the cgroup's expected memory consumption range. The kernel considers memory below that boundary to be a reserve - the minimum that the workload needs in order to make forward progress - and generally avoids reclaiming it, unless there is an imminent risk of entering an OOM situation. - memory.high configures the upper end of the cgroup's expected memory consumption range. A cgroup whose consumption grows beyond this threshold is forced into direct reclaim, to work off the excess and to throttle new allocations heavily, but is generally allowed to continue and the OOM killer is not invoked. - memory.max configures the hard maximum amount of memory that the cgroup is allowed to consume before the OOM killer is invoked. - memory.events shows event counters that indicate how often the cgroup was reclaimed while below memory.low, how often it was forced to reclaim excess beyond memory.high, how often it hit memory.max, and how often it entered OOM due to memory.max. This allows users to identify configuration problems when observing a degradation in workload performance. An overcommitted system will have an increased rate of low boundary breaches, whereas increased rates of high limit breaches, maximum hits, or even OOM situations will indicate internally overcommitted cgroups. For existing users of memory cgroups, the following deviations from the current interface are worth pointing out and explaining: - The original lower boundary, the soft limit, is defined as a limit that is per default unset. As a result, the set of cgroups that global reclaim prefers is opt-in, rather than opt-out. The costs for optimizing these mostly negative lookups are so high that the implementation, despite its enormous size, does not even provide the basic desirable behavior. First off, the soft limit has no hierarchical meaning. All configured groups are organized in a global rbtree and treated like equal peers, regardless where they are located in the hierarchy. This makes subtree delegation impossible. Second, the soft limit reclaim pass is so aggressive that it not just introduces high allocation latencies into the system, but also impacts system performance due to overreclaim, to the point where the feature becomes self-defeating. The memory.low boundary on the other hand is a top-down allocated reserve. A cgroup enjoys reclaim protection when it and all its ancestors are below their low boundaries, which makes delegation of subtrees possible. Secondly, new cgroups have no reserve per default and in the common case most cgroups are eligible for the preferred reclaim pass. This allows the new low boundary to be efficiently implemented with just a minor addition to the generic reclaim code, without the need for out-of-band data structures and reclaim passes. Because the generic reclaim code considers all cgroups except for the ones running low in the preferred first reclaim pass, overreclaim of individual groups is eliminated as well, resulting in much better overall workload performance. - The original high boundary, the hard limit, is defined as a strict limit that can not budge, even if the OOM killer has to be called. But this generally goes against the goal of making the most out of the available memory. The memory consumption of workloads varies during runtime, and that requires users to overcommit. But doing that with a strict upper limit requires either a fairly accurate prediction of the working set size or adding slack to the limit. Since working set size estimation is hard and error prone, and getting it wrong results in OOM kills, most users tend to err on the side of a looser limit and end up wasting precious resources. The memory.high boundary on the other hand can be set much more conservatively. When hit, it throttles allocations by forcing them into direct reclaim to work off the excess, but it never invokes the OOM killer. As a result, a high boundary that is chosen too aggressively will not terminate the processes, but instead it will lead to gradual performance degradation. The user can monitor this and make corrections until the minimal memory footprint that still gives acceptable performance is found. In extreme cases, with many concurrent allocations and a complete breakdown of reclaim progress within the group, the high boundary can be exceeded. But even then it's mostly better to satisfy the allocation from the slack available in other groups or the rest of the system than killing the group. Otherwise, memory.max is there to limit this type of spillover and ultimately contain buggy or even malicious applications. - The original control file names are unwieldy and inconsistent in many different ways. For example, the upper boundary hit count is exported in the memory.failcnt file, but an OOM event count has to be manually counted by listening to memory.oom_control events, and lower boundary / soft limit events have to be counted by first setting a threshold for that value and then counting those events. Also, usage and limit files encode their units in the filename. That makes the filenames very long, even though this is not information that a user needs to be reminded of every time they type out those names. To address these naming issues, as well as to signal clearly that the new interface carries a new configuration model, the naming conventions in it necessarily differ from the old interface. - The original limit files indicate the state of an unset limit with a very high number, and a configured limit can be unset by echoing -1 into those files. But that very high number is implementation and architecture dependent and not very descriptive. And while -1 can be understood as an underflow into the highest possible value, -2 or -10M etc. do not work, so it's not inconsistent. memory.low, memory.high, and memory.max will use the string "infinity" to indicate and set the highest possible value. [akpm@linux-foundation.org: use seq_puts() for basic strings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:06 +07:00
int initial_priority = sc->priority;
unsigned long total_scanned = 0;
unsigned long writeback_threshold;
mm: memcontrol: default hierarchy interface for memory Introduce the basic control files to account, partition, and limit memory using cgroups in default hierarchy mode. This interface versioning allows us to address fundamental design issues in the existing memory cgroup interface, further explained below. The old interface will be maintained indefinitely, but a clearer model and improved workload performance should encourage existing users to switch over to the new one eventually. The control files are thus: - memory.current shows the current consumption of the cgroup and its descendants, in bytes. - memory.low configures the lower end of the cgroup's expected memory consumption range. The kernel considers memory below that boundary to be a reserve - the minimum that the workload needs in order to make forward progress - and generally avoids reclaiming it, unless there is an imminent risk of entering an OOM situation. - memory.high configures the upper end of the cgroup's expected memory consumption range. A cgroup whose consumption grows beyond this threshold is forced into direct reclaim, to work off the excess and to throttle new allocations heavily, but is generally allowed to continue and the OOM killer is not invoked. - memory.max configures the hard maximum amount of memory that the cgroup is allowed to consume before the OOM killer is invoked. - memory.events shows event counters that indicate how often the cgroup was reclaimed while below memory.low, how often it was forced to reclaim excess beyond memory.high, how often it hit memory.max, and how often it entered OOM due to memory.max. This allows users to identify configuration problems when observing a degradation in workload performance. An overcommitted system will have an increased rate of low boundary breaches, whereas increased rates of high limit breaches, maximum hits, or even OOM situations will indicate internally overcommitted cgroups. For existing users of memory cgroups, the following deviations from the current interface are worth pointing out and explaining: - The original lower boundary, the soft limit, is defined as a limit that is per default unset. As a result, the set of cgroups that global reclaim prefers is opt-in, rather than opt-out. The costs for optimizing these mostly negative lookups are so high that the implementation, despite its enormous size, does not even provide the basic desirable behavior. First off, the soft limit has no hierarchical meaning. All configured groups are organized in a global rbtree and treated like equal peers, regardless where they are located in the hierarchy. This makes subtree delegation impossible. Second, the soft limit reclaim pass is so aggressive that it not just introduces high allocation latencies into the system, but also impacts system performance due to overreclaim, to the point where the feature becomes self-defeating. The memory.low boundary on the other hand is a top-down allocated reserve. A cgroup enjoys reclaim protection when it and all its ancestors are below their low boundaries, which makes delegation of subtrees possible. Secondly, new cgroups have no reserve per default and in the common case most cgroups are eligible for the preferred reclaim pass. This allows the new low boundary to be efficiently implemented with just a minor addition to the generic reclaim code, without the need for out-of-band data structures and reclaim passes. Because the generic reclaim code considers all cgroups except for the ones running low in the preferred first reclaim pass, overreclaim of individual groups is eliminated as well, resulting in much better overall workload performance. - The original high boundary, the hard limit, is defined as a strict limit that can not budge, even if the OOM killer has to be called. But this generally goes against the goal of making the most out of the available memory. The memory consumption of workloads varies during runtime, and that requires users to overcommit. But doing that with a strict upper limit requires either a fairly accurate prediction of the working set size or adding slack to the limit. Since working set size estimation is hard and error prone, and getting it wrong results in OOM kills, most users tend to err on the side of a looser limit and end up wasting precious resources. The memory.high boundary on the other hand can be set much more conservatively. When hit, it throttles allocations by forcing them into direct reclaim to work off the excess, but it never invokes the OOM killer. As a result, a high boundary that is chosen too aggressively will not terminate the processes, but instead it will lead to gradual performance degradation. The user can monitor this and make corrections until the minimal memory footprint that still gives acceptable performance is found. In extreme cases, with many concurrent allocations and a complete breakdown of reclaim progress within the group, the high boundary can be exceeded. But even then it's mostly better to satisfy the allocation from the slack available in other groups or the rest of the system than killing the group. Otherwise, memory.max is there to limit this type of spillover and ultimately contain buggy or even malicious applications. - The original control file names are unwieldy and inconsistent in many different ways. For example, the upper boundary hit count is exported in the memory.failcnt file, but an OOM event count has to be manually counted by listening to memory.oom_control events, and lower boundary / soft limit events have to be counted by first setting a threshold for that value and then counting those events. Also, usage and limit files encode their units in the filename. That makes the filenames very long, even though this is not information that a user needs to be reminded of every time they type out those names. To address these naming issues, as well as to signal clearly that the new interface carries a new configuration model, the naming conventions in it necessarily differ from the old interface. - The original limit files indicate the state of an unset limit with a very high number, and a configured limit can be unset by echoing -1 into those files. But that very high number is implementation and architecture dependent and not very descriptive. And while -1 can be understood as an underflow into the highest possible value, -2 or -10M etc. do not work, so it's not inconsistent. memory.low, memory.high, and memory.max will use the string "infinity" to indicate and set the highest possible value. [akpm@linux-foundation.org: use seq_puts() for basic strings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:06 +07:00
retry:
per-task-delay-accounting: add memory reclaim delay Sometimes, application responses become bad under heavy memory load. Applications take a bit time to reclaim memory. The statistics, how long memory reclaim takes, will be useful to measure memory usage. This patch adds accounting memory reclaim to per-task-delay-accounting for accounting the time of do_try_to_free_pages(). <i.e> - When System is under low memory load, memory reclaim may not occur. $ free total used free shared buffers cached Mem: 8197800 1577300 6620500 0 4808 1516724 -/+ buffers/cache: 55768 8142032 Swap: 16386292 0 16386292 $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 5069748 10612 3014060 0 0 0 0 3 26 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 4 22 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 3 18 0 0 100 0 Measure the time of tar command. $ ls -s test.dat 1501472 test.dat $ time tar cvf test.tar test.dat real 0m13.388s user 0m0.116s sys 0m5.304s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 428 5528345500 5477116080 62749891 IO count delay total 338 8078977189 SWAP count delay total 0 0 RECLAIM count delay total 0 0 - When system is under heavy memory load memory reclaim may occur. $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 7159032 49724 1812 3012 0 0 0 0 3 24 0 0 100 0 0 0 7159032 49724 1812 3012 0 0 0 0 4 24 0 0 100 0 0 0 7159032 49848 1812 3012 0 0 0 0 3 22 0 0 100 0 In this case, one process uses more 8G memory by execution of malloc() and memset(). $ time tar cvf test.tar test.dat real 1m38.563s <- increased by 85 sec user 0m0.140s sys 0m7.060s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 9021 7140446250 7315277975 923201824 IO count delay total 8965 90466349669 SWAP count delay total 3 21036367 RECLAIM count delay total 740 61011951153 In the later case, the value of RECLAIM is increasing. So, taskstats can show how much memory reclaim influences TAT. Signed-off-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujistu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 15:48:52 +07:00
delayacct_freepages_start();
if (global_reclaim(sc))
mm: vmstat: account per-zone stalls and pages skipped during reclaim The vmstat allocstall was fairly useful in the general sense but node-based LRUs change that. It's important to know if a stall was for an address-limited allocation request as this will require skipping pages from other zones. This patch adds pgstall_* counters to replace allocstall. The sum of the counters will equal the old allocstall so it can be trivially recalculated. A high number of address-limited allocation requests may result in a lot of useless LRU scanning for suitable pages. As address-limited allocations require pages to be skipped, it's important to know how much useless LRU scanning took place so this patch adds pgskip* counters. This yields the following model 1. The number of address-space limited stalls can be accounted for (pgstall) 2. The amount of useless work required to reclaim the data is accounted (pgskip) 3. The total number of scans is available from pgscan_kswapd and pgscan_direct so from that the ratio of useful to useless scans can be calculated. [mgorman@techsingularity.net: s/pgstall/allocstall/] Link: http://lkml.kernel.org/r/1468404004-5085-3-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-33-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:46:59 +07:00
__count_zid_vm_events(ALLOCSTALL, sc->reclaim_idx, 1);
do {
memcg: add memory.pressure_level events With this patch userland applications that want to maintain the interactivity/memory allocation cost can use the pressure level notifications. The levels are defined like this: The "low" level means that the system is reclaiming memory for new allocations. Monitoring this reclaiming activity might be useful for maintaining cache level. Upon notification, the program (typically "Activity Manager") might analyze vmstat and act in advance (i.e. prematurely shutdown unimportant services). The "medium" level means that the system is experiencing medium memory pressure, the system might be making swap, paging out active file caches, etc. Upon this event applications may decide to further analyze vmstat/zoneinfo/memcg or internal memory usage statistics and free any resources that can be easily reconstructed or re-read from a disk. The "critical" level means that the system is actively thrashing, it is about to out of memory (OOM) or even the in-kernel OOM killer is on its way to trigger. Applications should do whatever they can to help the system. It might be too late to consult with vmstat or any other statistics, so it's advisable to take an immediate action. The events are propagated upward until the event is handled, i.e. the events are not pass-through. Here is what this means: for example you have three cgroups: A->B->C. Now you set up an event listener on cgroups A, B and C, and suppose group C experiences some pressure. In this situation, only group C will receive the notification, i.e. groups A and B will not receive it. This is done to avoid excessive "broadcasting" of messages, which disturbs the system and which is especially bad if we are low on memory or thrashing. So, organize the cgroups wisely, or propagate the events manually (or, ask us to implement the pass-through events, explaining why would you need them.) Performance wise, the memory pressure notifications feature itself is lightweight and does not require much of bookkeeping, in contrast to the rest of memcg features. Unfortunately, as of current memcg implementation, pages accounting is an inseparable part and cannot be turned off. The good news is that there are some efforts[1] to improve the situation; plus, implementing the same, fully API-compatible[2] interface for CONFIG_MEMCG=n case (e.g. embedded) is also a viable option, so it will not require any changes on the userland side. [1] http://permalink.gmane.org/gmane.linux.kernel.cgroups/6291 [2] http://lkml.org/lkml/2013/2/21/454 [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_CGROPUPS=n warnings] Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Glauber Costa <glommer@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Leonid Moiseichuk <leonid.moiseichuk@nokia.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 05:08:31 +07:00
vmpressure_prio(sc->gfp_mask, sc->target_mem_cgroup,
sc->priority);
sc->nr_scanned = 0;
mm, oom: rework oom detection __alloc_pages_slowpath has traditionally relied on the direct reclaim and did_some_progress as an indicator that it makes sense to retry allocation rather than declaring OOM. shrink_zones had to rely on zone_reclaimable if shrink_zone didn't make any progress to prevent from a premature OOM killer invocation - the LRU might be full of dirty or writeback pages and direct reclaim cannot clean those up. zone_reclaimable allows to rescan the reclaimable lists several times and restart if a page is freed. This is really subtle behavior and it might lead to a livelock when a single freed page keeps allocator looping but the current task will not be able to allocate that single page. OOM killer would be more appropriate than looping without any progress for unbounded amount of time. This patch changes OOM detection logic and pulls it out from shrink_zone which is too low to be appropriate for any high level decisions such as OOM which is per zonelist property. It is __alloc_pages_slowpath which knows how many attempts have been done and what was the progress so far therefore it is more appropriate to implement this logic. The new heuristic is implemented in should_reclaim_retry helper called from __alloc_pages_slowpath. It tries to be more deterministic and easier to follow. It builds on an assumption that retrying makes sense only if the currently reclaimable memory + free pages would allow the current allocation request to succeed (as per __zone_watermark_ok) at least for one zone in the usable zonelist. This alone wouldn't be sufficient, though, because the writeback might get stuck and reclaimable pages might be pinned for a really long time or even depend on the current allocation context. Therefore there is a backoff mechanism implemented which reduces the reclaim target after each reclaim round without any progress. This means that we should eventually converge to only NR_FREE_PAGES as the target and fail on the wmark check and proceed to OOM. The backoff is simple and linear with 1/16 of the reclaimable pages for each round without any progress. We are optimistic and reset counter for successful reclaim rounds. Costly high order pages mostly preserve their semantic and those without __GFP_REPEAT fail right away while those which have the flag set will back off after the amount of reclaimable pages reaches equivalent of the requested order. The only difference is that if there was no progress during the reclaim we rely on zone watermark check. This is more logical thing to do than previous 1<<order attempts which were a result of zone_reclaimable faking the progress. [vdavydov@virtuozzo.com: check classzone_idx for shrink_zone] [hannes@cmpxchg.org: separate the heuristic into should_reclaim_retry] [rientjes@google.com: use zone_page_state_snapshot for NR_FREE_PAGES] [rientjes@google.com: shrink_zones doesn't need to return anything] Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-21 06:57:00 +07:00
shrink_zones(zonelist, sc);
total_scanned += sc->nr_scanned;
vmscan: fix do_try_to_free_pages() return value when priority==0 reclaim failure Greg Thelen reported recent Johannes's stack diet patch makes kernel hang. His test is following. mount -t cgroup none /cgroups -o memory mkdir /cgroups/cg1 echo $$ > /cgroups/cg1/tasks dd bs=1024 count=1024 if=/dev/null of=/data/foo echo $$ > /cgroups/tasks echo 1 > /cgroups/cg1/memory.force_empty Actually, This OOM hard to try logic have been corrupted since following two years old patch. commit a41f24ea9fd6169b147c53c2392e2887cc1d9247 Author: Nishanth Aravamudan <nacc@us.ibm.com> Date: Tue Apr 29 00:58:25 2008 -0700 page allocator: smarter retry of costly-order allocations Original intention was "return success if the system have shrinkable zones though priority==0 reclaim was failure". But the above patch changed to "return nr_reclaimed if .....". Oh, That forgot nr_reclaimed may be 0 if priority==0 reclaim failure. And Johannes's patch 0aeb2339e54e ("vmscan: remove all_unreclaimable scan control") made it more corrupt. Originally, priority==0 reclaim failure on memcg return 0, but this patch changed to return 1. It totally confused memcg. This patch fixes it completely. Reported-by: Greg Thelen <gthelen@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: Greg Thelen <gthelen@google.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05 04:15:05 +07:00
if (sc->nr_reclaimed >= sc->nr_to_reclaim)
break;
if (sc->compaction_ready)
break;
mm: use up free swap space before reaching OOM kill Recently, Luigi reported there are lots of free swap space when OOM happens. It's easily reproduced on zram-over-swap, where many instance of memory hogs are running and laptop_mode is enabled. He said there was no problem when he disabled laptop_mode. The problem when I investigate problem is following as. Assumption for easy explanation: There are no page cache page in system because they all are already reclaimed. 1. try_to_free_pages disable may_writepage when laptop_mode is enabled. 2. shrink_inactive_list isolates victim pages from inactive anon lru list. 3. shrink_page_list adds them to swapcache via add_to_swap but it doesn't pageout because sc->may_writepage is 0 so the page is rotated back into inactive anon lru list. The add_to_swap made the page Dirty by SetPageDirty. 4. 3 couldn't reclaim any pages so do_try_to_free_pages increase priority and retry reclaim with higher priority. 5. shrink_inactlive_list try to isolate victim pages from inactive anon lru list but got failed because it try to isolate pages with ISOLATE_CLEAN mode but inactive anon lru list is full of dirty pages by 3 so it just returns without any reclaim progress. 6. do_try_to_free_pages doesn't set may_writepage due to zero total_scanned. Because sc->nr_scanned is increased by shrink_page_list but we don't call shrink_page_list in 5 due to short of isolated pages. Above loop is continued until OOM happens. The problem didn't happen before [1] was merged because old logic's isolatation in shrink_inactive_list was successful and tried to call shrink_page_list to pageout them but it still ends up failed to page out by may_writepage. But important point is that sc->nr_scanned was increased although we couldn't swap out them so do_try_to_free_pages could set may_writepages. Since commit f80c0673610e ("mm: zone_reclaim: make isolate_lru_page() filter-aware") was introduced, it's not a good idea any more to depends on only the number of scanned pages for setting may_writepage. So this patch adds new trigger point of setting may_writepage as below DEF_PRIOIRTY - 2 which is used to show the significant memory pressure in VM so it's good fit for our purpose which would be better to lose power saving or clickety rather than OOM killing. Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Luigi Semenzato <semenzato@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 07:35:37 +07:00
/*
* If we're getting trouble reclaiming, start doing
* writepage even in laptop mode.
*/
if (sc->priority < DEF_PRIORITY - 2)
sc->may_writepage = 1;
/*
* Try to write back as many pages as we just scanned. This
* tends to cause slow streaming writers to write data to the
* disk smoothly, at the dirtying rate, which is nice. But
* that's undesirable in laptop mode, where we *want* lumpy
* writeout. So in laptop mode, write out the whole world.
*/
writeback_threshold = sc->nr_to_reclaim + sc->nr_to_reclaim / 2;
if (total_scanned > writeback_threshold) {
wakeup_flusher_threads(laptop_mode ? 0 : total_scanned,
WB_REASON_TRY_TO_FREE_PAGES);
sc->may_writepage = 1;
}
} while (--sc->priority >= 0);
vmscan: fix do_try_to_free_pages() return value when priority==0 reclaim failure Greg Thelen reported recent Johannes's stack diet patch makes kernel hang. His test is following. mount -t cgroup none /cgroups -o memory mkdir /cgroups/cg1 echo $$ > /cgroups/cg1/tasks dd bs=1024 count=1024 if=/dev/null of=/data/foo echo $$ > /cgroups/tasks echo 1 > /cgroups/cg1/memory.force_empty Actually, This OOM hard to try logic have been corrupted since following two years old patch. commit a41f24ea9fd6169b147c53c2392e2887cc1d9247 Author: Nishanth Aravamudan <nacc@us.ibm.com> Date: Tue Apr 29 00:58:25 2008 -0700 page allocator: smarter retry of costly-order allocations Original intention was "return success if the system have shrinkable zones though priority==0 reclaim was failure". But the above patch changed to "return nr_reclaimed if .....". Oh, That forgot nr_reclaimed may be 0 if priority==0 reclaim failure. And Johannes's patch 0aeb2339e54e ("vmscan: remove all_unreclaimable scan control") made it more corrupt. Originally, priority==0 reclaim failure on memcg return 0, but this patch changed to return 1. It totally confused memcg. This patch fixes it completely. Reported-by: Greg Thelen <gthelen@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: Greg Thelen <gthelen@google.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05 04:15:05 +07:00
per-task-delay-accounting: add memory reclaim delay Sometimes, application responses become bad under heavy memory load. Applications take a bit time to reclaim memory. The statistics, how long memory reclaim takes, will be useful to measure memory usage. This patch adds accounting memory reclaim to per-task-delay-accounting for accounting the time of do_try_to_free_pages(). <i.e> - When System is under low memory load, memory reclaim may not occur. $ free total used free shared buffers cached Mem: 8197800 1577300 6620500 0 4808 1516724 -/+ buffers/cache: 55768 8142032 Swap: 16386292 0 16386292 $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 5069748 10612 3014060 0 0 0 0 3 26 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 4 22 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 3 18 0 0 100 0 Measure the time of tar command. $ ls -s test.dat 1501472 test.dat $ time tar cvf test.tar test.dat real 0m13.388s user 0m0.116s sys 0m5.304s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 428 5528345500 5477116080 62749891 IO count delay total 338 8078977189 SWAP count delay total 0 0 RECLAIM count delay total 0 0 - When system is under heavy memory load memory reclaim may occur. $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 7159032 49724 1812 3012 0 0 0 0 3 24 0 0 100 0 0 0 7159032 49724 1812 3012 0 0 0 0 4 24 0 0 100 0 0 0 7159032 49848 1812 3012 0 0 0 0 3 22 0 0 100 0 In this case, one process uses more 8G memory by execution of malloc() and memset(). $ time tar cvf test.tar test.dat real 1m38.563s <- increased by 85 sec user 0m0.140s sys 0m7.060s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 9021 7140446250 7315277975 923201824 IO count delay total 8965 90466349669 SWAP count delay total 3 21036367 RECLAIM count delay total 740 61011951153 In the later case, the value of RECLAIM is increasing. So, taskstats can show how much memory reclaim influences TAT. Signed-off-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujistu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 15:48:52 +07:00
delayacct_freepages_end();
vmscan: fix do_try_to_free_pages() return value when priority==0 reclaim failure Greg Thelen reported recent Johannes's stack diet patch makes kernel hang. His test is following. mount -t cgroup none /cgroups -o memory mkdir /cgroups/cg1 echo $$ > /cgroups/cg1/tasks dd bs=1024 count=1024 if=/dev/null of=/data/foo echo $$ > /cgroups/tasks echo 1 > /cgroups/cg1/memory.force_empty Actually, This OOM hard to try logic have been corrupted since following two years old patch. commit a41f24ea9fd6169b147c53c2392e2887cc1d9247 Author: Nishanth Aravamudan <nacc@us.ibm.com> Date: Tue Apr 29 00:58:25 2008 -0700 page allocator: smarter retry of costly-order allocations Original intention was "return success if the system have shrinkable zones though priority==0 reclaim was failure". But the above patch changed to "return nr_reclaimed if .....". Oh, That forgot nr_reclaimed may be 0 if priority==0 reclaim failure. And Johannes's patch 0aeb2339e54e ("vmscan: remove all_unreclaimable scan control") made it more corrupt. Originally, priority==0 reclaim failure on memcg return 0, but this patch changed to return 1. It totally confused memcg. This patch fixes it completely. Reported-by: Greg Thelen <gthelen@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: Greg Thelen <gthelen@google.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05 04:15:05 +07:00
if (sc->nr_reclaimed)
return sc->nr_reclaimed;
/* Aborted reclaim to try compaction? don't OOM, then */
if (sc->compaction_ready)
return 1;
mm: memcontrol: default hierarchy interface for memory Introduce the basic control files to account, partition, and limit memory using cgroups in default hierarchy mode. This interface versioning allows us to address fundamental design issues in the existing memory cgroup interface, further explained below. The old interface will be maintained indefinitely, but a clearer model and improved workload performance should encourage existing users to switch over to the new one eventually. The control files are thus: - memory.current shows the current consumption of the cgroup and its descendants, in bytes. - memory.low configures the lower end of the cgroup's expected memory consumption range. The kernel considers memory below that boundary to be a reserve - the minimum that the workload needs in order to make forward progress - and generally avoids reclaiming it, unless there is an imminent risk of entering an OOM situation. - memory.high configures the upper end of the cgroup's expected memory consumption range. A cgroup whose consumption grows beyond this threshold is forced into direct reclaim, to work off the excess and to throttle new allocations heavily, but is generally allowed to continue and the OOM killer is not invoked. - memory.max configures the hard maximum amount of memory that the cgroup is allowed to consume before the OOM killer is invoked. - memory.events shows event counters that indicate how often the cgroup was reclaimed while below memory.low, how often it was forced to reclaim excess beyond memory.high, how often it hit memory.max, and how often it entered OOM due to memory.max. This allows users to identify configuration problems when observing a degradation in workload performance. An overcommitted system will have an increased rate of low boundary breaches, whereas increased rates of high limit breaches, maximum hits, or even OOM situations will indicate internally overcommitted cgroups. For existing users of memory cgroups, the following deviations from the current interface are worth pointing out and explaining: - The original lower boundary, the soft limit, is defined as a limit that is per default unset. As a result, the set of cgroups that global reclaim prefers is opt-in, rather than opt-out. The costs for optimizing these mostly negative lookups are so high that the implementation, despite its enormous size, does not even provide the basic desirable behavior. First off, the soft limit has no hierarchical meaning. All configured groups are organized in a global rbtree and treated like equal peers, regardless where they are located in the hierarchy. This makes subtree delegation impossible. Second, the soft limit reclaim pass is so aggressive that it not just introduces high allocation latencies into the system, but also impacts system performance due to overreclaim, to the point where the feature becomes self-defeating. The memory.low boundary on the other hand is a top-down allocated reserve. A cgroup enjoys reclaim protection when it and all its ancestors are below their low boundaries, which makes delegation of subtrees possible. Secondly, new cgroups have no reserve per default and in the common case most cgroups are eligible for the preferred reclaim pass. This allows the new low boundary to be efficiently implemented with just a minor addition to the generic reclaim code, without the need for out-of-band data structures and reclaim passes. Because the generic reclaim code considers all cgroups except for the ones running low in the preferred first reclaim pass, overreclaim of individual groups is eliminated as well, resulting in much better overall workload performance. - The original high boundary, the hard limit, is defined as a strict limit that can not budge, even if the OOM killer has to be called. But this generally goes against the goal of making the most out of the available memory. The memory consumption of workloads varies during runtime, and that requires users to overcommit. But doing that with a strict upper limit requires either a fairly accurate prediction of the working set size or adding slack to the limit. Since working set size estimation is hard and error prone, and getting it wrong results in OOM kills, most users tend to err on the side of a looser limit and end up wasting precious resources. The memory.high boundary on the other hand can be set much more conservatively. When hit, it throttles allocations by forcing them into direct reclaim to work off the excess, but it never invokes the OOM killer. As a result, a high boundary that is chosen too aggressively will not terminate the processes, but instead it will lead to gradual performance degradation. The user can monitor this and make corrections until the minimal memory footprint that still gives acceptable performance is found. In extreme cases, with many concurrent allocations and a complete breakdown of reclaim progress within the group, the high boundary can be exceeded. But even then it's mostly better to satisfy the allocation from the slack available in other groups or the rest of the system than killing the group. Otherwise, memory.max is there to limit this type of spillover and ultimately contain buggy or even malicious applications. - The original control file names are unwieldy and inconsistent in many different ways. For example, the upper boundary hit count is exported in the memory.failcnt file, but an OOM event count has to be manually counted by listening to memory.oom_control events, and lower boundary / soft limit events have to be counted by first setting a threshold for that value and then counting those events. Also, usage and limit files encode their units in the filename. That makes the filenames very long, even though this is not information that a user needs to be reminded of every time they type out those names. To address these naming issues, as well as to signal clearly that the new interface carries a new configuration model, the naming conventions in it necessarily differ from the old interface. - The original limit files indicate the state of an unset limit with a very high number, and a configured limit can be unset by echoing -1 into those files. But that very high number is implementation and architecture dependent and not very descriptive. And while -1 can be understood as an underflow into the highest possible value, -2 or -10M etc. do not work, so it's not inconsistent. memory.low, memory.high, and memory.max will use the string "infinity" to indicate and set the highest possible value. [akpm@linux-foundation.org: use seq_puts() for basic strings] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:06 +07:00
/* Untapped cgroup reserves? Don't OOM, retry. */
if (!sc->may_thrash) {
sc->priority = initial_priority;
sc->may_thrash = 1;
goto retry;
}
vmscan: fix do_try_to_free_pages() return value when priority==0 reclaim failure Greg Thelen reported recent Johannes's stack diet patch makes kernel hang. His test is following. mount -t cgroup none /cgroups -o memory mkdir /cgroups/cg1 echo $$ > /cgroups/cg1/tasks dd bs=1024 count=1024 if=/dev/null of=/data/foo echo $$ > /cgroups/tasks echo 1 > /cgroups/cg1/memory.force_empty Actually, This OOM hard to try logic have been corrupted since following two years old patch. commit a41f24ea9fd6169b147c53c2392e2887cc1d9247 Author: Nishanth Aravamudan <nacc@us.ibm.com> Date: Tue Apr 29 00:58:25 2008 -0700 page allocator: smarter retry of costly-order allocations Original intention was "return success if the system have shrinkable zones though priority==0 reclaim was failure". But the above patch changed to "return nr_reclaimed if .....". Oh, That forgot nr_reclaimed may be 0 if priority==0 reclaim failure. And Johannes's patch 0aeb2339e54e ("vmscan: remove all_unreclaimable scan control") made it more corrupt. Originally, priority==0 reclaim failure on memcg return 0, but this patch changed to return 1. It totally confused memcg. This patch fixes it completely. Reported-by: Greg Thelen <gthelen@google.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: Greg Thelen <gthelen@google.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05 04:15:05 +07:00
return 0;
}
static bool pfmemalloc_watermark_ok(pg_data_t *pgdat)
{
struct zone *zone;
unsigned long pfmemalloc_reserve = 0;
unsigned long free_pages = 0;
int i;
bool wmark_ok;
for (i = 0; i <= ZONE_NORMAL; i++) {
zone = &pgdat->node_zones[i];
mm: vmscan: do not throttle based on pfmemalloc reserves if node has no reclaimable pages Based upon 675becce15 ("mm: vmscan: do not throttle based on pfmemalloc reserves if node has no ZONE_NORMAL") from Mel. We have a system with the following topology: # numactl -H available: 3 nodes (0,2-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 0 size: 28273 MB node 0 free: 27323 MB node 2 cpus: node 2 size: 16384 MB node 2 free: 0 MB node 3 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 node 3 size: 30533 MB node 3 free: 13273 MB node distances: node 0 2 3 0: 10 20 20 2: 20 10 20 3: 20 20 10 Node 2 has no free memory, because: # cat /sys/devices/system/node/node2/hugepages/hugepages-16777216kB/nr_hugepages 1 This leads to the following zoneinfo: Node 2, zone DMA pages free 0 min 1840 low 2300 high 2760 scanned 0 spanned 262144 present 262144 managed 262144 ... all_unreclaimable: 1 If one then attempts to allocate some normal 16M hugepages via echo 37 > /proc/sys/vm/nr_hugepages The echo never returns and kswapd2 consumes CPU cycles. This is because throttle_direct_reclaim ends up calling wait_event(pfmemalloc_wait, pfmemalloc_watermark_ok...). pfmemalloc_watermark_ok() in turn checks all zones on the node if there are any reserves, and if so, then indicates the watermarks are ok, by seeing if there are sufficient free pages. 675becce15 added a condition already for memoryless nodes. In this case, though, the node has memory, it is just all consumed (and not reclaimable). Effectively, though, the result is the same on this call to pfmemalloc_watermark_ok() and thus seems like a reasonable additional condition. With this change, the afore-mentioned 16M hugepage allocation attempt succeeds and correctly round-robins between Nodes 1 and 3. Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Anton Blanchard <anton@samba.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 06:56:39 +07:00
if (!populated_zone(zone) ||
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:45:31 +07:00
pgdat_reclaimable_pages(pgdat) == 0)
continue;
pfmemalloc_reserve += min_wmark_pages(zone);
free_pages += zone_page_state(zone, NR_FREE_PAGES);
}
/* If there are no reserves (unexpected config) then do not throttle */
if (!pfmemalloc_reserve)
return true;
wmark_ok = free_pages > pfmemalloc_reserve / 2;
/* kswapd must be awake if processes are being throttled */
if (!wmark_ok && waitqueue_active(&pgdat->kswapd_wait)) {
pgdat->kswapd_classzone_idx = min(pgdat->kswapd_classzone_idx,
(enum zone_type)ZONE_NORMAL);
wake_up_interruptible(&pgdat->kswapd_wait);
}
return wmark_ok;
}
/*
* Throttle direct reclaimers if backing storage is backed by the network
* and the PFMEMALLOC reserve for the preferred node is getting dangerously
* depleted. kswapd will continue to make progress and wake the processes
mm: vmscan: check for fatal signals iff the process was throttled Commit 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") introduced a check for fatal signals after a process gets throttled for network storage. The intention was that if a process was throttled and got killed that it should not trigger the OOM killer. As pointed out by Minchan Kim and David Rientjes, this check is in the wrong place and too broad. If a system is in am OOM situation and a process is exiting, it can loop in __alloc_pages_slowpath() and calling direct reclaim in a loop. As the fatal signal is pending it returns 1 as if it is making forward progress and can effectively deadlock. This patch moves the fatal_signal_pending() check after throttling to throttle_direct_reclaim() where it belongs. If the process is killed while throttled, it will return immediately without direct reclaim except now it will have TIF_MEMDIE set and will use the PFMEMALLOC reserves. Minchan pointed out that it may be better to direct reclaim before returning to avoid using the reserves because there may be pages that can easily reclaim that would avoid using the reserves. However, we do no such targetted reclaim and there is no guarantee that suitable pages are available. As it is expected that this throttling happens when swap-over-NFS is used there is a possibility that the process will instead swap which may allocate network buffers from the PFMEMALLOC reserves. Hence, in the swap-over-nfs case where a process can be throtted and be killed it can use the reserves to exit or it can potentially use reserves to swap a few pages and then exit. This patch takes the option of using the reserves if necessary to allow the process exit quickly. If this patch passes review it should be considered a -stable candidate for 3.6. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-27 07:29:48 +07:00
* when the low watermark is reached.
*
* Returns true if a fatal signal was delivered during throttling. If this
* happens, the page allocator should not consider triggering the OOM killer.
*/
mm: vmscan: check for fatal signals iff the process was throttled Commit 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") introduced a check for fatal signals after a process gets throttled for network storage. The intention was that if a process was throttled and got killed that it should not trigger the OOM killer. As pointed out by Minchan Kim and David Rientjes, this check is in the wrong place and too broad. If a system is in am OOM situation and a process is exiting, it can loop in __alloc_pages_slowpath() and calling direct reclaim in a loop. As the fatal signal is pending it returns 1 as if it is making forward progress and can effectively deadlock. This patch moves the fatal_signal_pending() check after throttling to throttle_direct_reclaim() where it belongs. If the process is killed while throttled, it will return immediately without direct reclaim except now it will have TIF_MEMDIE set and will use the PFMEMALLOC reserves. Minchan pointed out that it may be better to direct reclaim before returning to avoid using the reserves because there may be pages that can easily reclaim that would avoid using the reserves. However, we do no such targetted reclaim and there is no guarantee that suitable pages are available. As it is expected that this throttling happens when swap-over-NFS is used there is a possibility that the process will instead swap which may allocate network buffers from the PFMEMALLOC reserves. Hence, in the swap-over-nfs case where a process can be throtted and be killed it can use the reserves to exit or it can potentially use reserves to swap a few pages and then exit. This patch takes the option of using the reserves if necessary to allow the process exit quickly. If this patch passes review it should be considered a -stable candidate for 3.6. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-27 07:29:48 +07:00
static bool throttle_direct_reclaim(gfp_t gfp_mask, struct zonelist *zonelist,
nodemask_t *nodemask)
{
struct zoneref *z;
struct zone *zone;
pg_data_t *pgdat = NULL;
/*
* Kernel threads should not be throttled as they may be indirectly
* responsible for cleaning pages necessary for reclaim to make forward
* progress. kjournald for example may enter direct reclaim while
* committing a transaction where throttling it could forcing other
* processes to block on log_wait_commit().
*/
if (current->flags & PF_KTHREAD)
mm: vmscan: check for fatal signals iff the process was throttled Commit 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") introduced a check for fatal signals after a process gets throttled for network storage. The intention was that if a process was throttled and got killed that it should not trigger the OOM killer. As pointed out by Minchan Kim and David Rientjes, this check is in the wrong place and too broad. If a system is in am OOM situation and a process is exiting, it can loop in __alloc_pages_slowpath() and calling direct reclaim in a loop. As the fatal signal is pending it returns 1 as if it is making forward progress and can effectively deadlock. This patch moves the fatal_signal_pending() check after throttling to throttle_direct_reclaim() where it belongs. If the process is killed while throttled, it will return immediately without direct reclaim except now it will have TIF_MEMDIE set and will use the PFMEMALLOC reserves. Minchan pointed out that it may be better to direct reclaim before returning to avoid using the reserves because there may be pages that can easily reclaim that would avoid using the reserves. However, we do no such targetted reclaim and there is no guarantee that suitable pages are available. As it is expected that this throttling happens when swap-over-NFS is used there is a possibility that the process will instead swap which may allocate network buffers from the PFMEMALLOC reserves. Hence, in the swap-over-nfs case where a process can be throtted and be killed it can use the reserves to exit or it can potentially use reserves to swap a few pages and then exit. This patch takes the option of using the reserves if necessary to allow the process exit quickly. If this patch passes review it should be considered a -stable candidate for 3.6. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-27 07:29:48 +07:00
goto out;
/*
* If a fatal signal is pending, this process should not throttle.
* It should return quickly so it can exit and free its memory
*/
if (fatal_signal_pending(current))
goto out;
/*
* Check if the pfmemalloc reserves are ok by finding the first node
* with a usable ZONE_NORMAL or lower zone. The expectation is that
* GFP_KERNEL will be required for allocating network buffers when
* swapping over the network so ZONE_HIGHMEM is unusable.
*
* Throttling is based on the first usable node and throttled processes
* wait on a queue until kswapd makes progress and wakes them. There
* is an affinity then between processes waking up and where reclaim
* progress has been made assuming the process wakes on the same node.
* More importantly, processes running on remote nodes will not compete
* for remote pfmemalloc reserves and processes on different nodes
* should make reasonable progress.
*/
for_each_zone_zonelist_nodemask(zone, z, zonelist,
gfp_zone(gfp_mask), nodemask) {
if (zone_idx(zone) > ZONE_NORMAL)
continue;
/* Throttle based on the first usable node */
pgdat = zone->zone_pgdat;
if (pfmemalloc_watermark_ok(pgdat))
goto out;
break;
}
/* If no zone was usable by the allocation flags then do not throttle */
if (!pgdat)
mm: vmscan: check for fatal signals iff the process was throttled Commit 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") introduced a check for fatal signals after a process gets throttled for network storage. The intention was that if a process was throttled and got killed that it should not trigger the OOM killer. As pointed out by Minchan Kim and David Rientjes, this check is in the wrong place and too broad. If a system is in am OOM situation and a process is exiting, it can loop in __alloc_pages_slowpath() and calling direct reclaim in a loop. As the fatal signal is pending it returns 1 as if it is making forward progress and can effectively deadlock. This patch moves the fatal_signal_pending() check after throttling to throttle_direct_reclaim() where it belongs. If the process is killed while throttled, it will return immediately without direct reclaim except now it will have TIF_MEMDIE set and will use the PFMEMALLOC reserves. Minchan pointed out that it may be better to direct reclaim before returning to avoid using the reserves because there may be pages that can easily reclaim that would avoid using the reserves. However, we do no such targetted reclaim and there is no guarantee that suitable pages are available. As it is expected that this throttling happens when swap-over-NFS is used there is a possibility that the process will instead swap which may allocate network buffers from the PFMEMALLOC reserves. Hence, in the swap-over-nfs case where a process can be throtted and be killed it can use the reserves to exit or it can potentially use reserves to swap a few pages and then exit. This patch takes the option of using the reserves if necessary to allow the process exit quickly. If this patch passes review it should be considered a -stable candidate for 3.6. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-27 07:29:48 +07:00
goto out;
/* Account for the throttling */
count_vm_event(PGSCAN_DIRECT_THROTTLE);
/*
* If the caller cannot enter the filesystem, it's possible that it
* is due to the caller holding an FS lock or performing a journal
* transaction in the case of a filesystem like ext[3|4]. In this case,
* it is not safe to block on pfmemalloc_wait as kswapd could be
* blocked waiting on the same lock. Instead, throttle for up to a
* second before continuing.
*/
if (!(gfp_mask & __GFP_FS)) {
wait_event_interruptible_timeout(pgdat->pfmemalloc_wait,
pfmemalloc_watermark_ok(pgdat), HZ);
mm: vmscan: check for fatal signals iff the process was throttled Commit 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") introduced a check for fatal signals after a process gets throttled for network storage. The intention was that if a process was throttled and got killed that it should not trigger the OOM killer. As pointed out by Minchan Kim and David Rientjes, this check is in the wrong place and too broad. If a system is in am OOM situation and a process is exiting, it can loop in __alloc_pages_slowpath() and calling direct reclaim in a loop. As the fatal signal is pending it returns 1 as if it is making forward progress and can effectively deadlock. This patch moves the fatal_signal_pending() check after throttling to throttle_direct_reclaim() where it belongs. If the process is killed while throttled, it will return immediately without direct reclaim except now it will have TIF_MEMDIE set and will use the PFMEMALLOC reserves. Minchan pointed out that it may be better to direct reclaim before returning to avoid using the reserves because there may be pages that can easily reclaim that would avoid using the reserves. However, we do no such targetted reclaim and there is no guarantee that suitable pages are available. As it is expected that this throttling happens when swap-over-NFS is used there is a possibility that the process will instead swap which may allocate network buffers from the PFMEMALLOC reserves. Hence, in the swap-over-nfs case where a process can be throtted and be killed it can use the reserves to exit or it can potentially use reserves to swap a few pages and then exit. This patch takes the option of using the reserves if necessary to allow the process exit quickly. If this patch passes review it should be considered a -stable candidate for 3.6. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-27 07:29:48 +07:00
goto check_pending;
}
/* Throttle until kswapd wakes the process */
wait_event_killable(zone->zone_pgdat->pfmemalloc_wait,
pfmemalloc_watermark_ok(pgdat));
mm: vmscan: check for fatal signals iff the process was throttled Commit 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") introduced a check for fatal signals after a process gets throttled for network storage. The intention was that if a process was throttled and got killed that it should not trigger the OOM killer. As pointed out by Minchan Kim and David Rientjes, this check is in the wrong place and too broad. If a system is in am OOM situation and a process is exiting, it can loop in __alloc_pages_slowpath() and calling direct reclaim in a loop. As the fatal signal is pending it returns 1 as if it is making forward progress and can effectively deadlock. This patch moves the fatal_signal_pending() check after throttling to throttle_direct_reclaim() where it belongs. If the process is killed while throttled, it will return immediately without direct reclaim except now it will have TIF_MEMDIE set and will use the PFMEMALLOC reserves. Minchan pointed out that it may be better to direct reclaim before returning to avoid using the reserves because there may be pages that can easily reclaim that would avoid using the reserves. However, we do no such targetted reclaim and there is no guarantee that suitable pages are available. As it is expected that this throttling happens when swap-over-NFS is used there is a possibility that the process will instead swap which may allocate network buffers from the PFMEMALLOC reserves. Hence, in the swap-over-nfs case where a process can be throtted and be killed it can use the reserves to exit or it can potentially use reserves to swap a few pages and then exit. This patch takes the option of using the reserves if necessary to allow the process exit quickly. If this patch passes review it should be considered a -stable candidate for 3.6. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-27 07:29:48 +07:00
check_pending:
if (fatal_signal_pending(current))
return true;
out:
return false;
}
mm: use zonelists instead of zones when direct reclaiming pages The following patches replace multiple zonelists per node with two zonelists that are filtered based on the GFP flags. The patches as a set fix a bug with regard to the use of MPOL_BIND and ZONE_MOVABLE. With this patchset, the MPOL_BIND will apply to the two highest zones when the highest zone is ZONE_MOVABLE. This should be considered as an alternative fix for the MPOL_BIND+ZONE_MOVABLE in 2.6.23 to the previously discussed hack that filters only custom zonelists. The first patch cleans up an inconsistency where direct reclaim uses zonelist->zones where other places use zonelist. The second patch introduces a helper function node_zonelist() for looking up the appropriate zonelist for a GFP mask which simplifies patches later in the set. The third patch defines/remembers the "preferred zone" for numa statistics, as it is no longer always the first zone in a zonelist. The forth patch replaces multiple zonelists with two zonelists that are filtered. The two zonelists are due to the fact that the memoryless patchset introduces a second set of zonelists for __GFP_THISNODE. The fifth patch introduces helper macros for retrieving the zone and node indices of entries in a zonelist. The final patch introduces filtering of the zonelists based on a nodemask. Two zonelists exist per node, one for normal allocations and one for __GFP_THISNODE. Performance results varied depending on the machine configuration. In real workloads the gain/loss will depend on how much the userspace portion of the benchmark benefits from having more cache available due to reduced referencing of zonelists. These are the range of performance losses/gains when running against 2.6.24-rc4-mm1. The set and these machines are a mix of i386, x86_64 and ppc64 both NUMA and non-NUMA. loss to gain Total CPU time on Kernbench: -0.86% to 1.13% Elapsed time on Kernbench: -0.79% to 0.76% page_test from aim9: -4.37% to 0.79% brk_test from aim9: -0.71% to 4.07% fork_test from aim9: -1.84% to 4.60% exec_test from aim9: -0.71% to 1.08% This patch: The allocator deals with zonelists which indicate the order in which zones should be targeted for an allocation. Similarly, direct reclaim of pages iterates over an array of zones. For consistency, this patch converts direct reclaim to use a zonelist. No functionality is changed by this patch. This simplifies zonelist iterators in the next patch. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:12:12 +07:00
unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
gfp_t gfp_mask, nodemask_t *nodemask)
{
unsigned long nr_reclaimed;
struct scan_control sc = {
.nr_to_reclaim = SWAP_CLUSTER_MAX,
mm: teach mm by current context info to not do I/O during memory allocation This patch introduces PF_MEMALLOC_NOIO on process flag('flags' field of 'struct task_struct'), so that the flag can be set by one task to avoid doing I/O inside memory allocation in the task's context. The patch trys to solve one deadlock problem caused by block device, and the problem may happen at least in the below situations: - during block device runtime resume, if memory allocation with GFP_KERNEL is called inside runtime resume callback of any one of its ancestors(or the block device itself), the deadlock may be triggered inside the memory allocation since it might not complete until the block device becomes active and the involed page I/O finishes. The situation is pointed out first by Alan Stern. It is not a good approach to convert all GFP_KERNEL[1] in the path into GFP_NOIO because several subsystems may be involved(for example, PCI, USB and SCSI may be involved for usb mass stoarage device, network devices involved too in the iSCSI case) - during block device runtime suspend, because runtime resume need to wait for completion of concurrent runtime suspend. - during error handling of usb mass storage deivce, USB bus reset will be put on the device, so there shouldn't have any memory allocation with GFP_KERNEL during USB bus reset, otherwise the deadlock similar with above may be triggered. Unfortunately, any usb device may include one mass storage interface in theory, so it requires all usb interface drivers to handle the situation. In fact, most usb drivers don't know how to handle bus reset on the device and don't provide .pre_set() and .post_reset() callback at all, so USB core has to unbind and bind driver for these devices. So it is still not practical to resort to GFP_NOIO for solving the problem. Also the introduced solution can be used by block subsystem or block drivers too, for example, set the PF_MEMALLOC_NOIO flag before doing actual I/O transfer. It is not a good idea to convert all these GFP_KERNEL in the affected path into GFP_NOIO because these functions doing that may be implemented as library and will be called in many other contexts. In fact, memalloc_noio_flags() can convert some of current static GFP_NOIO allocation into GFP_KERNEL back in other non-affected contexts, at least almost all GFP_NOIO in USB subsystem can be converted into GFP_KERNEL after applying the approach and make allocation with GFP_NOIO only happen in runtime resume/bus reset/block I/O transfer contexts generally. [1], several GFP_KERNEL allocation examples in runtime resume path - pci subsystem acpi_os_allocate <-acpi_ut_allocate <-ACPI_ALLOCATE_ZEROED <-acpi_evaluate_object <-__acpi_bus_set_power <-acpi_bus_set_power <-acpi_pci_set_power_state <-platform_pci_set_power_state <-pci_platform_power_transition <-__pci_complete_power_transition <-pci_set_power_state <-pci_restore_standard_config <-pci_pm_runtime_resume - usb subsystem usb_get_status <-finish_port_resume <-usb_port_resume <-generic_resume <-usb_resume_device <-usb_resume_both <-usb_runtime_resume - some individual usb drivers usblp, uvc, gspca, most of dvb-usb-v2 media drivers, cpia2, az6007, .... That is just what I have found. Unfortunately, this allocation can only be found by human being now, and there should be many not found since any function in the resume path(call tree) may allocate memory with GFP_KERNEL. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.de> Cc: Jiri Kosina <jiri.kosina@suse.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Decotigny <david.decotigny@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 07:34:08 +07:00
.gfp_mask = (gfp_mask = memalloc_noio_flags(gfp_mask)),
.reclaim_idx = gfp_zone(gfp_mask),
.order = order,
.nodemask = nodemask,
.priority = DEF_PRIORITY,
.may_writepage = !laptop_mode,
.may_unmap = 1,
.may_swap = 1,
};
/*
mm: vmscan: check for fatal signals iff the process was throttled Commit 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") introduced a check for fatal signals after a process gets throttled for network storage. The intention was that if a process was throttled and got killed that it should not trigger the OOM killer. As pointed out by Minchan Kim and David Rientjes, this check is in the wrong place and too broad. If a system is in am OOM situation and a process is exiting, it can loop in __alloc_pages_slowpath() and calling direct reclaim in a loop. As the fatal signal is pending it returns 1 as if it is making forward progress and can effectively deadlock. This patch moves the fatal_signal_pending() check after throttling to throttle_direct_reclaim() where it belongs. If the process is killed while throttled, it will return immediately without direct reclaim except now it will have TIF_MEMDIE set and will use the PFMEMALLOC reserves. Minchan pointed out that it may be better to direct reclaim before returning to avoid using the reserves because there may be pages that can easily reclaim that would avoid using the reserves. However, we do no such targetted reclaim and there is no guarantee that suitable pages are available. As it is expected that this throttling happens when swap-over-NFS is used there is a possibility that the process will instead swap which may allocate network buffers from the PFMEMALLOC reserves. Hence, in the swap-over-nfs case where a process can be throtted and be killed it can use the reserves to exit or it can potentially use reserves to swap a few pages and then exit. This patch takes the option of using the reserves if necessary to allow the process exit quickly. If this patch passes review it should be considered a -stable candidate for 3.6. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-27 07:29:48 +07:00
* Do not enter reclaim if fatal signal was delivered while throttled.
* 1 is returned so that the page allocator does not OOM kill at this
* point.
*/
mm: vmscan: check for fatal signals iff the process was throttled Commit 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") introduced a check for fatal signals after a process gets throttled for network storage. The intention was that if a process was throttled and got killed that it should not trigger the OOM killer. As pointed out by Minchan Kim and David Rientjes, this check is in the wrong place and too broad. If a system is in am OOM situation and a process is exiting, it can loop in __alloc_pages_slowpath() and calling direct reclaim in a loop. As the fatal signal is pending it returns 1 as if it is making forward progress and can effectively deadlock. This patch moves the fatal_signal_pending() check after throttling to throttle_direct_reclaim() where it belongs. If the process is killed while throttled, it will return immediately without direct reclaim except now it will have TIF_MEMDIE set and will use the PFMEMALLOC reserves. Minchan pointed out that it may be better to direct reclaim before returning to avoid using the reserves because there may be pages that can easily reclaim that would avoid using the reserves. However, we do no such targetted reclaim and there is no guarantee that suitable pages are available. As it is expected that this throttling happens when swap-over-NFS is used there is a possibility that the process will instead swap which may allocate network buffers from the PFMEMALLOC reserves. Hence, in the swap-over-nfs case where a process can be throtted and be killed it can use the reserves to exit or it can potentially use reserves to swap a few pages and then exit. This patch takes the option of using the reserves if necessary to allow the process exit quickly. If this patch passes review it should be considered a -stable candidate for 3.6. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-27 07:29:48 +07:00
if (throttle_direct_reclaim(gfp_mask, zonelist, nodemask))
return 1;
trace_mm_vmscan_direct_reclaim_begin(order,
sc.may_writepage,
gfp_mask,
sc.reclaim_idx);
nr_reclaimed = do_try_to_free_pages(zonelist, &sc);
trace_mm_vmscan_direct_reclaim_end(nr_reclaimed);
return nr_reclaimed;
}
#ifdef CONFIG_MEMCG
unsigned long mem_cgroup_shrink_node(struct mem_cgroup *memcg,
2009-09-24 05:56:39 +07:00
gfp_t gfp_mask, bool noswap,
pg_data_t *pgdat,
memcg: count the soft_limit reclaim in global background reclaim The global kswapd scans per-zone LRU and reclaims pages regardless of the cgroup. It breaks memory isolation since one cgroup can end up reclaiming pages from another cgroup. Instead we should rely on memcg-aware target reclaim including per-memcg kswapd and soft_limit hierarchical reclaim under memory pressure. In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. This patch is the first step to skip shrink_zone() if soft_limit reclaim does enough work. This is part of the effort which tries to reduce reclaiming pages in global LRU in memcg. The per-memcg background reclaim patchset further enhances the per-cgroup targetting reclaim, which I should have V4 posted shortly. Try running multiple memory intensive workloads within seperate memcgs. Watch the counters of soft_steal in memory.stat. $ cat /dev/cgroup/A/memory.stat | grep 'soft' soft_steal 240000 soft_scan 240000 total_soft_steal 240000 total_soft_scan 240000 This patch: In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. We would like to skip shrink_zone() if soft_limit reclaim does enough work. Also, we need to make the memory pressure balanced across per-memcg zones, like the logic vm-core. This patch is the first step where we start with counting the nr_scanned and nr_reclaimed from soft_limit reclaim into the global scan_control. Signed-off-by: Ying Han <yinghan@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 06:25:25 +07:00
unsigned long *nr_scanned)
2009-09-24 05:56:39 +07:00
{
struct scan_control sc = {
.nr_to_reclaim = SWAP_CLUSTER_MAX,
.target_mem_cgroup = memcg,
2009-09-24 05:56:39 +07:00
.may_writepage = !laptop_mode,
.may_unmap = 1,
.reclaim_idx = MAX_NR_ZONES - 1,
2009-09-24 05:56:39 +07:00
.may_swap = !noswap,
};
mm: vmscan: invoke slab shrinkers from shrink_zone() The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 07:56:13 +07:00
unsigned long lru_pages;
memcg: count the soft_limit reclaim in global background reclaim The global kswapd scans per-zone LRU and reclaims pages regardless of the cgroup. It breaks memory isolation since one cgroup can end up reclaiming pages from another cgroup. Instead we should rely on memcg-aware target reclaim including per-memcg kswapd and soft_limit hierarchical reclaim under memory pressure. In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. This patch is the first step to skip shrink_zone() if soft_limit reclaim does enough work. This is part of the effort which tries to reduce reclaiming pages in global LRU in memcg. The per-memcg background reclaim patchset further enhances the per-cgroup targetting reclaim, which I should have V4 posted shortly. Try running multiple memory intensive workloads within seperate memcgs. Watch the counters of soft_steal in memory.stat. $ cat /dev/cgroup/A/memory.stat | grep 'soft' soft_steal 240000 soft_scan 240000 total_soft_steal 240000 total_soft_scan 240000 This patch: In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. We would like to skip shrink_zone() if soft_limit reclaim does enough work. Also, we need to make the memory pressure balanced across per-memcg zones, like the logic vm-core. This patch is the first step where we start with counting the nr_scanned and nr_reclaimed from soft_limit reclaim into the global scan_control. Signed-off-by: Ying Han <yinghan@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 06:25:25 +07:00
2009-09-24 05:56:39 +07:00
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
trace_mm_vmscan_memcg_softlimit_reclaim_begin(sc.order,
sc.may_writepage,
sc.gfp_mask,
sc.reclaim_idx);
2009-09-24 05:56:39 +07:00
/*
* NOTE: Although we can get the priority field, using it
* here is not a good idea, since it limits the pages we can scan.
* if we don't reclaim here, the shrink_node from balance_pgdat
2009-09-24 05:56:39 +07:00
* will pick up pages from other mem cgroup's as well. We hack
* the priority and make it zero.
*/
shrink_node_memcg(pgdat, memcg, &sc, &lru_pages);
trace_mm_vmscan_memcg_softlimit_reclaim_end(sc.nr_reclaimed);
memcg: count the soft_limit reclaim in global background reclaim The global kswapd scans per-zone LRU and reclaims pages regardless of the cgroup. It breaks memory isolation since one cgroup can end up reclaiming pages from another cgroup. Instead we should rely on memcg-aware target reclaim including per-memcg kswapd and soft_limit hierarchical reclaim under memory pressure. In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. This patch is the first step to skip shrink_zone() if soft_limit reclaim does enough work. This is part of the effort which tries to reduce reclaiming pages in global LRU in memcg. The per-memcg background reclaim patchset further enhances the per-cgroup targetting reclaim, which I should have V4 posted shortly. Try running multiple memory intensive workloads within seperate memcgs. Watch the counters of soft_steal in memory.stat. $ cat /dev/cgroup/A/memory.stat | grep 'soft' soft_steal 240000 soft_scan 240000 total_soft_steal 240000 total_soft_scan 240000 This patch: In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. We would like to skip shrink_zone() if soft_limit reclaim does enough work. Also, we need to make the memory pressure balanced across per-memcg zones, like the logic vm-core. This patch is the first step where we start with counting the nr_scanned and nr_reclaimed from soft_limit reclaim into the global scan_control. Signed-off-by: Ying Han <yinghan@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27 06:25:25 +07:00
*nr_scanned = sc.nr_scanned;
2009-09-24 05:56:39 +07:00
return sc.nr_reclaimed;
}
unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *memcg,
mm: memcontrol: fix transparent huge page allocations under pressure In a memcg with even just moderate cache pressure, success rates for transparent huge page allocations drop to zero, wasting a lot of effort that the allocator puts into assembling these pages. The reason for this is that the memcg reclaim code was never designed for higher-order charges. It reclaims in small batches until there is room for at least one page. Huge page charges only succeed when these batches add up over a series of huge faults, which is unlikely under any significant load involving order-0 allocations in the group. Remove that loop on the memcg side in favor of passing the actual reclaim goal to direct reclaim, which is already set up and optimized to meet higher-order goals efficiently. This brings memcg's THP policy in line with the system policy: if the allocator painstakingly assembles a hugepage, memcg will at least make an honest effort to charge it. As a result, transparent hugepage allocation rates amid cache activity are drastically improved: vanilla patched pgalloc 4717530.80 ( +0.00%) 4451376.40 ( -5.64%) pgfault 491370.60 ( +0.00%) 225477.40 ( -54.11%) pgmajfault 2.00 ( +0.00%) 1.80 ( -6.67%) thp_fault_alloc 0.00 ( +0.00%) 531.60 (+100.00%) thp_fault_fallback 749.00 ( +0.00%) 217.40 ( -70.88%) [ Note: this may in turn increase memory consumption from internal fragmentation, which is an inherent risk of transparent hugepages. Some setups may have to adjust the memcg limits accordingly to accomodate this - or, if the machine is already packed to capacity, disable the transparent huge page feature. ] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave@sr71.net> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 05:28:56 +07:00
unsigned long nr_pages,
gfp_t gfp_mask,
mm: memcontrol: fix transparent huge page allocations under pressure In a memcg with even just moderate cache pressure, success rates for transparent huge page allocations drop to zero, wasting a lot of effort that the allocator puts into assembling these pages. The reason for this is that the memcg reclaim code was never designed for higher-order charges. It reclaims in small batches until there is room for at least one page. Huge page charges only succeed when these batches add up over a series of huge faults, which is unlikely under any significant load involving order-0 allocations in the group. Remove that loop on the memcg side in favor of passing the actual reclaim goal to direct reclaim, which is already set up and optimized to meet higher-order goals efficiently. This brings memcg's THP policy in line with the system policy: if the allocator painstakingly assembles a hugepage, memcg will at least make an honest effort to charge it. As a result, transparent hugepage allocation rates amid cache activity are drastically improved: vanilla patched pgalloc 4717530.80 ( +0.00%) 4451376.40 ( -5.64%) pgfault 491370.60 ( +0.00%) 225477.40 ( -54.11%) pgmajfault 2.00 ( +0.00%) 1.80 ( -6.67%) thp_fault_alloc 0.00 ( +0.00%) 531.60 (+100.00%) thp_fault_fallback 749.00 ( +0.00%) 217.40 ( -70.88%) [ Note: this may in turn increase memory consumption from internal fragmentation, which is an inherent risk of transparent hugepages. Some setups may have to adjust the memcg limits accordingly to accomodate this - or, if the machine is already packed to capacity, disable the transparent huge page feature. ] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave@sr71.net> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 05:28:56 +07:00
bool may_swap)
{
2009-09-24 05:56:39 +07:00
struct zonelist *zonelist;
unsigned long nr_reclaimed;
int nid;
struct scan_control sc = {
mm: memcontrol: fix transparent huge page allocations under pressure In a memcg with even just moderate cache pressure, success rates for transparent huge page allocations drop to zero, wasting a lot of effort that the allocator puts into assembling these pages. The reason for this is that the memcg reclaim code was never designed for higher-order charges. It reclaims in small batches until there is room for at least one page. Huge page charges only succeed when these batches add up over a series of huge faults, which is unlikely under any significant load involving order-0 allocations in the group. Remove that loop on the memcg side in favor of passing the actual reclaim goal to direct reclaim, which is already set up and optimized to meet higher-order goals efficiently. This brings memcg's THP policy in line with the system policy: if the allocator painstakingly assembles a hugepage, memcg will at least make an honest effort to charge it. As a result, transparent hugepage allocation rates amid cache activity are drastically improved: vanilla patched pgalloc 4717530.80 ( +0.00%) 4451376.40 ( -5.64%) pgfault 491370.60 ( +0.00%) 225477.40 ( -54.11%) pgmajfault 2.00 ( +0.00%) 1.80 ( -6.67%) thp_fault_alloc 0.00 ( +0.00%) 531.60 (+100.00%) thp_fault_fallback 749.00 ( +0.00%) 217.40 ( -70.88%) [ Note: this may in turn increase memory consumption from internal fragmentation, which is an inherent risk of transparent hugepages. Some setups may have to adjust the memcg limits accordingly to accomodate this - or, if the machine is already packed to capacity, disable the transparent huge page feature. ] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave@sr71.net> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 05:28:56 +07:00
.nr_to_reclaim = max(nr_pages, SWAP_CLUSTER_MAX),
.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK),
.reclaim_idx = MAX_NR_ZONES - 1,
.target_mem_cgroup = memcg,
.priority = DEF_PRIORITY,
.may_writepage = !laptop_mode,
.may_unmap = 1,
mm: memcontrol: fix transparent huge page allocations under pressure In a memcg with even just moderate cache pressure, success rates for transparent huge page allocations drop to zero, wasting a lot of effort that the allocator puts into assembling these pages. The reason for this is that the memcg reclaim code was never designed for higher-order charges. It reclaims in small batches until there is room for at least one page. Huge page charges only succeed when these batches add up over a series of huge faults, which is unlikely under any significant load involving order-0 allocations in the group. Remove that loop on the memcg side in favor of passing the actual reclaim goal to direct reclaim, which is already set up and optimized to meet higher-order goals efficiently. This brings memcg's THP policy in line with the system policy: if the allocator painstakingly assembles a hugepage, memcg will at least make an honest effort to charge it. As a result, transparent hugepage allocation rates amid cache activity are drastically improved: vanilla patched pgalloc 4717530.80 ( +0.00%) 4451376.40 ( -5.64%) pgfault 491370.60 ( +0.00%) 225477.40 ( -54.11%) pgmajfault 2.00 ( +0.00%) 1.80 ( -6.67%) thp_fault_alloc 0.00 ( +0.00%) 531.60 (+100.00%) thp_fault_fallback 749.00 ( +0.00%) 217.40 ( -70.88%) [ Note: this may in turn increase memory consumption from internal fragmentation, which is an inherent risk of transparent hugepages. Some setups may have to adjust the memcg limits accordingly to accomodate this - or, if the machine is already packed to capacity, disable the transparent huge page feature. ] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave@sr71.net> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 05:28:56 +07:00
.may_swap = may_swap,
};
/*
* Unlike direct reclaim via alloc_pages(), memcg's reclaim doesn't
* take care of from where we get pages. So the node where we start the
* scan does not need to be the current node.
*/
nid = mem_cgroup_select_victim_node(memcg);
zonelist = NODE_DATA(nid)->node_zonelists;
trace_mm_vmscan_memcg_reclaim_begin(0,
sc.may_writepage,
sc.gfp_mask,
sc.reclaim_idx);
nr_reclaimed = do_try_to_free_pages(zonelist, &sc);
trace_mm_vmscan_memcg_reclaim_end(nr_reclaimed);
return nr_reclaimed;
}
#endif
static void age_active_anon(struct pglist_data *pgdat,
struct scan_control *sc)
{
struct mem_cgroup *memcg;
if (!total_swap_pages)
return;
memcg = mem_cgroup_iter(NULL, NULL, NULL);
do {
struct lruvec *lruvec = mem_cgroup_lruvec(pgdat, memcg);
mm: consider whether to decivate based on eligible zones inactive ratio Minchan Kim reported that with per-zone lru state it was possible to identify that a normal zone with 8^M anonymous pages could trigger OOM with non-atomic order-0 allocations as all pages in the zone were in the active list. gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0 Call Trace: __alloc_pages_nodemask+0xe52/0xe60 ? new_slab+0x39c/0x3b0 new_slab+0x39c/0x3b0 ___slab_alloc.constprop.87+0x6da/0x840 ? __alloc_skb+0x3c/0x260 ? enqueue_task_fair+0x73/0xbf0 ? poll_select_copy_remaining+0x140/0x140 __slab_alloc.isra.81.constprop.86+0x40/0x6d ? __alloc_skb+0x3c/0x260 kmem_cache_alloc+0x22c/0x260 ? __alloc_skb+0x3c/0x260 __alloc_skb+0x3c/0x260 alloc_skb_with_frags+0x4e/0x1a0 sock_alloc_send_pskb+0x16a/0x1b0 ? wait_for_unix_gc+0x31/0x90 unix_stream_sendmsg+0x28d/0x340 sock_sendmsg+0x2d/0x40 sock_write_iter+0x6c/0xc0 __vfs_write+0xc0/0x120 vfs_write+0x9b/0x1a0 ? __might_fault+0x49/0xa0 SyS_write+0x44/0x90 do_fast_syscall_32+0xa6/0x1e0 Mem-Info: active_anon:101103 inactive_anon:102219 isolated_anon:0 active_file:503 inactive_file:544 isolated_file:0 unevictable:0 dirty:0 writeback:34 unstable:0 slab_reclaimable:6298 slab_unreclaimable:74669 mapped:863 shmem:0 pagetables:100998 bounce:0 free:23573 free_pcp:1861 free_cma:0 Node 0 active_anon:404412kB inactive_anon:409040kB active_file:2012kB inactive_file:2176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:3452kB dirty:0kB writeback:136kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1320845 all_unreclaimable? yes DMA free:3296kB min:68kB low:84kB high:100kB active_anon:5540kB inactive_anon:0kB active_file:0kB inactive_file:0kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:248kB slab_unreclaimable:2628kB kernel_stack:792kB pagetables:2316kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 809 1965 1965 Normal free:3600kB min:3604kB low:4504kB high:5404kB active_anon:86304kB inactive_anon:0kB active_file:160kB inactive_file:376kB present:897016kB managed:858524kB mlocked:0kB slab_reclaimable:24944kB slab_unreclaimable:296048kB kernel_stack:163832kB pagetables:35892kB bounce:0kB free_pcp:3076kB local_pcp:656kB free_cma:0kB lowmem_reserve[]: 0 0 9247 9247 HighMem free:86156kB min:512kB low:1796kB high:3080kB active_anon:312852kB inactive_anon:410024kB active_file:1924kB inactive_file:2012kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:365784kB bounce:0kB free_pcp:3868kB local_pcp:720kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 8*4kB (UM) 8*8kB (UM) 4*16kB (M) 2*32kB (UM) 2*64kB (UM) 1*128kB (M) 3*256kB (UME) 2*512kB (UE) 1*1024kB (E) 0*2048kB 0*4096kB = 3296kB Normal: 240*4kB (UME) 160*8kB (UME) 23*16kB (ME) 3*32kB (UE) 3*64kB (UME) 2*128kB (ME) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3408kB HighMem: 10942*4kB (UM) 3102*8kB (UM) 866*16kB (UM) 76*32kB (UM) 11*64kB (UM) 4*128kB (UM) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 86344kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB 54409 total pagecache pages 53215 pages in swap cache Swap cache stats: add 300982, delete 247765, find 157978/226539 Free swap = 3803244kB Total swap = 4192252kB 524186 pages RAM 295934 pages HighMem/MovableOnly 9642 pages reserved 0 pages cma reserved The problem is due to the active deactivation logic in inactive_list_is_low: Node 0 active_anon:404412kB inactive_anon:409040kB IOW, (inactive_anon of node * inactive_ratio > active_anon of node) due to highmem anonymous stat so VM never deactivates normal zone's anonymous pages. This patch is a modified version of Minchan's original solution but based upon it. The problem with Minchan's patch is that any low zone with an imbalanced list could force a rotation. In this patch, a zone-constrained global reclaim will rotate the list if the inactive/active ratio of all eligible zones needs to be corrected. It is possible that higher zone pages will be initially rotated prematurely but this is the safer choice to maintain overall LRU age. Link: http://lkml.kernel.org/r/20160722090929.GJ10438@techsingularity.net Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 05:47:34 +07:00
if (inactive_list_is_low(lruvec, false, sc))
shrink_active_list(SWAP_CLUSTER_MAX, lruvec,
sc, LRU_ACTIVE_ANON);
memcg = mem_cgroup_iter(NULL, memcg, NULL);
} while (memcg);
}
static bool zone_balanced(struct zone *zone, int order, int classzone_idx)
{
unsigned long mark = high_wmark_pages(zone);
if (!zone_watermark_ok_safe(zone, order, mark, classzone_idx))
return false;
/*
* If any eligible zone is balanced then the node is not considered
* to be congested or dirty
*/
clear_bit(PGDAT_CONGESTED, &zone->zone_pgdat->flags);
clear_bit(PGDAT_DIRTY, &zone->zone_pgdat->flags);
return true;
}
/*
* Prepare kswapd for sleeping. This verifies that there are no processes
* waiting in throttle_direct_reclaim() and that watermarks have been met.
*
* Returns true if kswapd is ready to sleep
*/
static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, int classzone_idx)
{
int i;
/*
mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed Charles Shirron and Paul Cassella from Cray Inc have reported kswapd stuck in a busy loop with nothing left to balance, but kswapd_try_to_sleep() failing to sleep. Their analysis found the cause to be a combination of several factors: 1. A process is waiting in throttle_direct_reclaim() on pgdat->pfmemalloc_wait 2. The process has been killed (by OOM in this case), but has not yet been scheduled to remove itself from the waitqueue and die. 3. kswapd checks for throttled processes in prepare_kswapd_sleep(): if (waitqueue_active(&pgdat->pfmemalloc_wait)) { wake_up(&pgdat->pfmemalloc_wait); return false; // kswapd will not go to sleep } However, for a process that was already killed, wake_up() does not remove the process from the waitqueue, since try_to_wake_up() checks its state first and returns false when the process is no longer waiting. 4. kswapd is running on the same CPU as the only CPU that the process is allowed to run on (through cpus_allowed, or possibly single-cpu system). 5. CONFIG_PREEMPT_NONE=y kernel is used. If there's nothing to balance, kswapd encounters no voluntary preemption points and repeatedly fails prepare_kswapd_sleep(), blocking the process from running and removing itself from the waitqueue, which would let kswapd sleep. So, the source of the problem is that we prevent kswapd from going to sleep until there are processes waiting on the pfmemalloc_wait queue, and a process waiting on a queue is guaranteed to be removed from the queue only when it gets scheduled. This was done to make sure that no process is left sleeping on pfmemalloc_wait when kswapd itself goes to sleep. However, it isn't necessary to postpone kswapd sleep until the pfmemalloc_wait queue actually empties. To prevent processes from being left sleeping, it's actually enough to guarantee that all processes waiting on pfmemalloc_wait queue have been woken up by the time we put kswapd to sleep. This patch therefore fixes this issue by substituting 'wake_up' with 'wake_up_all' and removing 'return false' in the code snippet from prepare_kswapd_sleep() above. Note that if any process puts itself in the queue after this waitqueue_active() check, or after the wake up itself, it means that the process will also wake up kswapd - and since we are under prepare_to_wait(), the wake up won't be missed. Also we update the comment prepare_kswapd_sleep() to hopefully more clearly describe the races it is preventing. Fixes: 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [3.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-09 05:32:40 +07:00
* The throttled processes are normally woken up in balance_pgdat() as
* soon as pfmemalloc_watermark_ok() is true. But there is a potential
* race between when kswapd checks the watermarks and a process gets
* throttled. There is also a potential race if processes get
* throttled, kswapd wakes, a large process exits thereby balancing the
* zones, which causes kswapd to exit balance_pgdat() before reaching
* the wake up checks. If kswapd is going to sleep, no process should
* be sleeping on pfmemalloc_wait, so wake them now if necessary. If
* the wake up is premature, processes will wake kswapd and get
* throttled again. The difference from wake ups in balance_pgdat() is
* that here we are under prepare_to_wait().
*/
mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed Charles Shirron and Paul Cassella from Cray Inc have reported kswapd stuck in a busy loop with nothing left to balance, but kswapd_try_to_sleep() failing to sleep. Their analysis found the cause to be a combination of several factors: 1. A process is waiting in throttle_direct_reclaim() on pgdat->pfmemalloc_wait 2. The process has been killed (by OOM in this case), but has not yet been scheduled to remove itself from the waitqueue and die. 3. kswapd checks for throttled processes in prepare_kswapd_sleep(): if (waitqueue_active(&pgdat->pfmemalloc_wait)) { wake_up(&pgdat->pfmemalloc_wait); return false; // kswapd will not go to sleep } However, for a process that was already killed, wake_up() does not remove the process from the waitqueue, since try_to_wake_up() checks its state first and returns false when the process is no longer waiting. 4. kswapd is running on the same CPU as the only CPU that the process is allowed to run on (through cpus_allowed, or possibly single-cpu system). 5. CONFIG_PREEMPT_NONE=y kernel is used. If there's nothing to balance, kswapd encounters no voluntary preemption points and repeatedly fails prepare_kswapd_sleep(), blocking the process from running and removing itself from the waitqueue, which would let kswapd sleep. So, the source of the problem is that we prevent kswapd from going to sleep until there are processes waiting on the pfmemalloc_wait queue, and a process waiting on a queue is guaranteed to be removed from the queue only when it gets scheduled. This was done to make sure that no process is left sleeping on pfmemalloc_wait when kswapd itself goes to sleep. However, it isn't necessary to postpone kswapd sleep until the pfmemalloc_wait queue actually empties. To prevent processes from being left sleeping, it's actually enough to guarantee that all processes waiting on pfmemalloc_wait queue have been woken up by the time we put kswapd to sleep. This patch therefore fixes this issue by substituting 'wake_up' with 'wake_up_all' and removing 'return false' in the code snippet from prepare_kswapd_sleep() above. Note that if any process puts itself in the queue after this waitqueue_active() check, or after the wake up itself, it means that the process will also wake up kswapd - and since we are under prepare_to_wait(), the wake up won't be missed. Also we update the comment prepare_kswapd_sleep() to hopefully more clearly describe the races it is preventing. Fixes: 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [3.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-09 05:32:40 +07:00
if (waitqueue_active(&pgdat->pfmemalloc_wait))
wake_up_all(&pgdat->pfmemalloc_wait);
for (i = 0; i <= classzone_idx; i++) {
struct zone *zone = pgdat->node_zones + i;
if (!populated_zone(zone))
continue;
if (!zone_balanced(zone, order, classzone_idx))
return false;
}
return true;
}
mm: vmscan: limit the number of pages kswapd reclaims at each priority This series does not fix all the current known problems with reclaim but it addresses one important swapping bug when there is background IO. Changelog since V3 - Drop the slab shrink changes in light of Glaubers series and discussions highlighted that there were a number of potential problems with the patch. (mel) - Rebased to 3.10-rc1 Changelog since V2 - Preserve ratio properly for proportional scanning (kamezawa) Changelog since V1 - Rename ZONE_DIRTY to ZONE_TAIL_LRU_DIRTY (andi) - Reformat comment in shrink_page_list (andi) - Clarify some comments (dhillf) - Rework how the proportional scanning is preserved - Add PageReclaim check before kswapd starts writeback - Reset sc.nr_reclaimed on every full zone scan Kswapd and page reclaim behaviour has been screwy in one way or the other for a long time. Very broadly speaking it worked in the far past because machines were limited in memory so it did not have that many pages to scan and it stalled congestion_wait() frequently to prevent it going completely nuts. In recent times it has behaved very unsatisfactorily with some of the problems compounded by the removal of stall logic and the introduction of transparent hugepage support with high-order reclaims. There are many variations of bugs that are rooted in this area. One example is reports of a large copy operations or backup causing the machine to grind to a halt or applications pushed to swap. Sometimes in low memory situations a large percentage of memory suddenly gets reclaimed. In other cases an application starts and kswapd hits 100% CPU usage for prolonged periods of time and so on. There is now talk of introducing features like an extra free kbytes tunable to work around aspects of the problem instead of trying to deal with it. It's compounded by the problem that it can be very workload and machine specific. This series aims at addressing some of the worst of these problems without attempting to fundmentally alter how page reclaim works. Patches 1-2 limits the number of pages kswapd reclaims while still obeying the anon/file proportion of the LRUs it should be scanning. Patches 3-4 control how and when kswapd raises its scanning priority and deletes the scanning restart logic which is tricky to follow. Patch 5 notes that it is too easy for kswapd to reach priority 0 when scanning and then reclaim the world. Down with that sort of thing. Patch 6 notes that kswapd starts writeback based on scanning priority which is not necessarily related to dirty pages. It will have kswapd writeback pages if a number of unqueued dirty pages have been recently encountered at the tail of the LRU. Patch 7 notes that sometimes kswapd should stall waiting on IO to complete to reduce LRU churn and the likelihood that it'll reclaim young clean pages or push applications to swap. It will cause kswapd to block on IO if it detects that pages being reclaimed under writeback are recycling through the LRU before the IO completes. Patchies 8-9 are cosmetic but balance_pgdat() is easier to follow after they are applied. This was tested using memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service and it is run multiple times. It starts with no background IO and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. 3.10.0-rc1 3.10.0-rc1 vanilla lessdisrupt-v4 Ops memcachetest-0M 22155.00 ( 0.00%) 22180.00 ( 0.11%) Ops memcachetest-715M 22720.00 ( 0.00%) 22355.00 ( -1.61%) Ops memcachetest-2385M 3939.00 ( 0.00%) 23450.00 (495.33%) Ops memcachetest-4055M 3628.00 ( 0.00%) 24341.00 (570.92%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) Ops io-duration-2385M 118.00 ( 0.00%) 21.00 ( 82.20%) Ops io-duration-4055M 162.00 ( 0.00%) 36.00 ( 77.78%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140134.00 ( 0.00%) 18.00 ( 99.99%) Ops swaptotal-2385M 392438.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 449037.00 ( 0.00%) 27864.00 ( 93.79%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 148031.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 135109.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1529984.00 ( 0.00%) 1530235.00 ( -0.02%) Ops minorfaults-715M 1794168.00 ( 0.00%) 1613750.00 ( 10.06%) Ops minorfaults-2385M 1739813.00 ( 0.00%) 1609396.00 ( 7.50%) Ops minorfaults-4055M 1754460.00 ( 0.00%) 1614810.00 ( 7.96%) Ops majorfaults-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 185.00 ( 0.00%) 180.00 ( 2.70%) Ops majorfaults-2385M 24472.00 ( 0.00%) 101.00 ( 99.59%) Ops majorfaults-4055M 22302.00 ( 0.00%) 229.00 ( 98.97%) Note how the vanilla kernels performance collapses when there is enough IO taking place in the background. This drop in performance is part of what users complain of when they start backups. Note how the swapin and major fault figures indicate that processes were being pushed to swap prematurely. With the series applied, there is no noticable performance drop and while there is still some swap activity, it's tiny. 20 iterations of this test were run in total and averaged. Every 5 iterations, additional IO was generated in the background using dd to measure how the workload was impacted. The 0M, 715M, 2385M and 4055M subblock refer to the amount of IO going on in the background at each iteration. So memcachetest-2385M is reporting how many transactions/second memcachetest recorded on average over 5 iterations while there was 2385M of IO going on in the ground. There are six blocks of information reported here memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 22K/sec to just under 4K/second when there is 2385M of IO going on in the background. This is one type of performance collapse users complain about if a large cp or backup starts in the background io-duration refers to how long it takes for the background IO to complete. It's showing that with the patched kernel that the IO completes faster while not interfering with the memcache workload swaptotal is the total amount of swap traffic. With the patched kernel, the total amount of swapping is much reduced although it is still not zero. swapin in this case is an indication as to whether we are swap trashing. The closer the swapin/swapout ratio is to 1, the worse the trashing is. Note with the patched kernel that there is no swapin activity indicating that all the pages swapped were really inactive unused pages. minorfaults are just minor faults. An increased number of minor faults can indicate that page reclaim is unmapping the pages but not swapping them out before they are faulted back in. With the patched kernel, there is only a small change in minor faults majorfaults are just major faults in the target workload and a high number can indicate that a workload is being prematurely swapped. With the patched kernel, major faults are much reduced. As there are no swapin's recorded so it's not being swapped. The likely explanation is that that libraries or configuration files used by the workload during startup get paged out by the background IO. Overall with the series applied, there is no noticable performance drop due to background IO and while there is still some swap activity, it's tiny and the lack of swapins imply that the swapped pages were inactive and unused. 3.10.0-rc1 3.10.0-rc1 vanilla lessdisrupt-v4 Page Ins 1234608 101892 Page Outs 12446272 11810468 Swap Ins 283406 0 Swap Outs 698469 27882 Direct pages scanned 0 136480 Kswapd pages scanned 6266537 5369364 Kswapd pages reclaimed 1088989 930832 Direct pages reclaimed 0 120901 Kswapd efficiency 17% 17% Kswapd velocity 5398.371 4635.115 Direct efficiency 100% 88% Direct velocity 0.000 117.817 Percentage direct scans 0% 2% Page writes by reclaim 1655843 4009929 Page writes file 957374 3982047 Page writes anon 698469 27882 Page reclaim immediate 5245 1745 Page rescued immediate 0 0 Slabs scanned 33664 25216 Direct inode steals 0 0 Kswapd inode steals 19409 778 Kswapd skipped wait 0 0 THP fault alloc 35 30 THP collapse alloc 472 401 THP splits 27 22 THP fault fallback 0 0 THP collapse fail 0 1 Compaction stalls 0 4 Compaction success 0 0 Compaction failures 0 4 Page migrate success 0 0 Page migrate failure 0 0 Compaction pages isolated 0 0 Compaction migrate scanned 0 0 Compaction free scanned 0 0 Compaction cost 0 0 NUMA PTE updates 0 0 NUMA hint faults 0 0 NUMA hint local faults 0 0 NUMA pages migrated 0 0 AutoNUMA cost 0 0 Unfortunately, note that there is a small amount of direct reclaim due to kswapd no longer reclaiming the world. ftrace indicates that the direct reclaim stalls are mostly harmless with the vast bulk of the stalls incurred by dd 23 tclsh-3367 38 memcachetest-13733 49 memcachetest-12443 57 tee-3368 1541 dd-13826 1981 dd-12539 A consequence of the direct reclaim for dd is that the processes for the IO workload may show a higher system CPU usage. There is also a risk that kswapd not reclaiming the world may mean that it stays awake balancing zones, does not stall on the appropriate events and continually scans pages it cannot reclaim consuming CPU. This will be visible as continued high CPU usage but in my own tests I only saw a single spike lasting less than a second and I did not observe any problems related to reclaim while running the series on my desktop. This patch: The number of pages kswapd can reclaim is bound by the number of pages it scans which is related to the size of the zone and the scanning priority. In many cases the priority remains low because it's reset every SWAP_CLUSTER_MAX reclaimed pages but in the event kswapd scans a large number of pages it cannot reclaim, it will raise the priority and potentially discard a large percentage of the zone as sc->nr_to_reclaim is ULONG_MAX. The user-visible effect is a reclaim "spike" where a large percentage of memory is suddenly freed. It would be bad enough if this was just unused memory but because of how anon/file pages are balanced it is possible that applications get pushed to swap unnecessarily. This patch limits the number of pages kswapd will reclaim to the high watermark. Reclaim will still overshoot due to it not being a hard limit as shrink_lruvec() will ignore the sc.nr_to_reclaim at DEF_PRIORITY but it prevents kswapd reclaiming the world at higher priorities. The number of pages it reclaims is not adjusted for high-order allocations as kswapd will reclaim excessively if it is to balance zones for high-order allocations. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:42 +07:00
/*
* kswapd shrinks a node of pages that are at or below the highest usable
* zone that is currently unbalanced.
mm: vmscan: flatten kswapd priority loop kswapd stops raising the scanning priority when at least SWAP_CLUSTER_MAX pages have been reclaimed or the pgdat is considered balanced. It then rechecks if it needs to restart at DEF_PRIORITY and whether high-order reclaim needs to be reset. This is not wrong per-se but it is confusing to follow and forcing kswapd to stay at DEF_PRIORITY may require several restarts before it has scanned enough pages to meet the high watermark even at 100% efficiency. This patch irons out the logic a bit by controlling when priority is raised and removing the "goto loop_again". This patch has kswapd raise the scanning priority until it is scanning enough pages that it could meet the high watermark in one shrink of the LRU lists if it is able to reclaim at 100% efficiency. It will not raise the scanning prioirty higher unless it is failing to reclaim any pages. To avoid infinite looping for high-order allocation requests kswapd will not reclaim for high-order allocations when it has reclaimed at least twice the number of pages as the allocation request. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:45 +07:00
*
* Returns true if kswapd scanned at least the requested number of pages to
mm: vmscan: block kswapd if it is encountering pages under writeback Historically, kswapd used to congestion_wait() at higher priorities if it was not making forward progress. This made no sense as the failure to make progress could be completely independent of IO. It was later replaced by wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't wait on congested zones in balance_pgdat()) as it was duplicating logic in shrink_inactive_list(). This is problematic. If kswapd encounters many pages under writeback and it continues to scan until it reaches the high watermark then it will quickly skip over the pages under writeback and reclaim clean young pages or push applications out to swap. The use of wait_iff_congested() is not suited to kswapd as it will only stall if the underlying BDI is really congested or a direct reclaimer was unable to write to the underlying BDI. kswapd bypasses the BDI congestion as it sets PF_SWAPWRITE but even if this was taken into account then it would cause direct reclaimers to stall on writeback which is not desirable. This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is encountering too many pages under writeback. If this flag is set and kswapd encounters a PageReclaim page under writeback then it'll assume that the LRU lists are being recycled too quickly before IO can complete and block waiting for some IO to complete. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:51 +07:00
* reclaim or if the lack of progress was due to pages under writeback.
* This is used to determine if the scanning priority needs to be raised.
mm: vmscan: limit the number of pages kswapd reclaims at each priority This series does not fix all the current known problems with reclaim but it addresses one important swapping bug when there is background IO. Changelog since V3 - Drop the slab shrink changes in light of Glaubers series and discussions highlighted that there were a number of potential problems with the patch. (mel) - Rebased to 3.10-rc1 Changelog since V2 - Preserve ratio properly for proportional scanning (kamezawa) Changelog since V1 - Rename ZONE_DIRTY to ZONE_TAIL_LRU_DIRTY (andi) - Reformat comment in shrink_page_list (andi) - Clarify some comments (dhillf) - Rework how the proportional scanning is preserved - Add PageReclaim check before kswapd starts writeback - Reset sc.nr_reclaimed on every full zone scan Kswapd and page reclaim behaviour has been screwy in one way or the other for a long time. Very broadly speaking it worked in the far past because machines were limited in memory so it did not have that many pages to scan and it stalled congestion_wait() frequently to prevent it going completely nuts. In recent times it has behaved very unsatisfactorily with some of the problems compounded by the removal of stall logic and the introduction of transparent hugepage support with high-order reclaims. There are many variations of bugs that are rooted in this area. One example is reports of a large copy operations or backup causing the machine to grind to a halt or applications pushed to swap. Sometimes in low memory situations a large percentage of memory suddenly gets reclaimed. In other cases an application starts and kswapd hits 100% CPU usage for prolonged periods of time and so on. There is now talk of introducing features like an extra free kbytes tunable to work around aspects of the problem instead of trying to deal with it. It's compounded by the problem that it can be very workload and machine specific. This series aims at addressing some of the worst of these problems without attempting to fundmentally alter how page reclaim works. Patches 1-2 limits the number of pages kswapd reclaims while still obeying the anon/file proportion of the LRUs it should be scanning. Patches 3-4 control how and when kswapd raises its scanning priority and deletes the scanning restart logic which is tricky to follow. Patch 5 notes that it is too easy for kswapd to reach priority 0 when scanning and then reclaim the world. Down with that sort of thing. Patch 6 notes that kswapd starts writeback based on scanning priority which is not necessarily related to dirty pages. It will have kswapd writeback pages if a number of unqueued dirty pages have been recently encountered at the tail of the LRU. Patch 7 notes that sometimes kswapd should stall waiting on IO to complete to reduce LRU churn and the likelihood that it'll reclaim young clean pages or push applications to swap. It will cause kswapd to block on IO if it detects that pages being reclaimed under writeback are recycling through the LRU before the IO completes. Patchies 8-9 are cosmetic but balance_pgdat() is easier to follow after they are applied. This was tested using memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service and it is run multiple times. It starts with no background IO and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. 3.10.0-rc1 3.10.0-rc1 vanilla lessdisrupt-v4 Ops memcachetest-0M 22155.00 ( 0.00%) 22180.00 ( 0.11%) Ops memcachetest-715M 22720.00 ( 0.00%) 22355.00 ( -1.61%) Ops memcachetest-2385M 3939.00 ( 0.00%) 23450.00 (495.33%) Ops memcachetest-4055M 3628.00 ( 0.00%) 24341.00 (570.92%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) Ops io-duration-2385M 118.00 ( 0.00%) 21.00 ( 82.20%) Ops io-duration-4055M 162.00 ( 0.00%) 36.00 ( 77.78%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140134.00 ( 0.00%) 18.00 ( 99.99%) Ops swaptotal-2385M 392438.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 449037.00 ( 0.00%) 27864.00 ( 93.79%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 148031.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 135109.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1529984.00 ( 0.00%) 1530235.00 ( -0.02%) Ops minorfaults-715M 1794168.00 ( 0.00%) 1613750.00 ( 10.06%) Ops minorfaults-2385M 1739813.00 ( 0.00%) 1609396.00 ( 7.50%) Ops minorfaults-4055M 1754460.00 ( 0.00%) 1614810.00 ( 7.96%) Ops majorfaults-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 185.00 ( 0.00%) 180.00 ( 2.70%) Ops majorfaults-2385M 24472.00 ( 0.00%) 101.00 ( 99.59%) Ops majorfaults-4055M 22302.00 ( 0.00%) 229.00 ( 98.97%) Note how the vanilla kernels performance collapses when there is enough IO taking place in the background. This drop in performance is part of what users complain of when they start backups. Note how the swapin and major fault figures indicate that processes were being pushed to swap prematurely. With the series applied, there is no noticable performance drop and while there is still some swap activity, it's tiny. 20 iterations of this test were run in total and averaged. Every 5 iterations, additional IO was generated in the background using dd to measure how the workload was impacted. The 0M, 715M, 2385M and 4055M subblock refer to the amount of IO going on in the background at each iteration. So memcachetest-2385M is reporting how many transactions/second memcachetest recorded on average over 5 iterations while there was 2385M of IO going on in the ground. There are six blocks of information reported here memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 22K/sec to just under 4K/second when there is 2385M of IO going on in the background. This is one type of performance collapse users complain about if a large cp or backup starts in the background io-duration refers to how long it takes for the background IO to complete. It's showing that with the patched kernel that the IO completes faster while not interfering with the memcache workload swaptotal is the total amount of swap traffic. With the patched kernel, the total amount of swapping is much reduced although it is still not zero. swapin in this case is an indication as to whether we are swap trashing. The closer the swapin/swapout ratio is to 1, the worse the trashing is. Note with the patched kernel that there is no swapin activity indicating that all the pages swapped were really inactive unused pages. minorfaults are just minor faults. An increased number of minor faults can indicate that page reclaim is unmapping the pages but not swapping them out before they are faulted back in. With the patched kernel, there is only a small change in minor faults majorfaults are just major faults in the target workload and a high number can indicate that a workload is being prematurely swapped. With the patched kernel, major faults are much reduced. As there are no swapin's recorded so it's not being swapped. The likely explanation is that that libraries or configuration files used by the workload during startup get paged out by the background IO. Overall with the series applied, there is no noticable performance drop due to background IO and while there is still some swap activity, it's tiny and the lack of swapins imply that the swapped pages were inactive and unused. 3.10.0-rc1 3.10.0-rc1 vanilla lessdisrupt-v4 Page Ins 1234608 101892 Page Outs 12446272 11810468 Swap Ins 283406 0 Swap Outs 698469 27882 Direct pages scanned 0 136480 Kswapd pages scanned 6266537 5369364 Kswapd pages reclaimed 1088989 930832 Direct pages reclaimed 0 120901 Kswapd efficiency 17% 17% Kswapd velocity 5398.371 4635.115 Direct efficiency 100% 88% Direct velocity 0.000 117.817 Percentage direct scans 0% 2% Page writes by reclaim 1655843 4009929 Page writes file 957374 3982047 Page writes anon 698469 27882 Page reclaim immediate 5245 1745 Page rescued immediate 0 0 Slabs scanned 33664 25216 Direct inode steals 0 0 Kswapd inode steals 19409 778 Kswapd skipped wait 0 0 THP fault alloc 35 30 THP collapse alloc 472 401 THP splits 27 22 THP fault fallback 0 0 THP collapse fail 0 1 Compaction stalls 0 4 Compaction success 0 0 Compaction failures 0 4 Page migrate success 0 0 Page migrate failure 0 0 Compaction pages isolated 0 0 Compaction migrate scanned 0 0 Compaction free scanned 0 0 Compaction cost 0 0 NUMA PTE updates 0 0 NUMA hint faults 0 0 NUMA hint local faults 0 0 NUMA pages migrated 0 0 AutoNUMA cost 0 0 Unfortunately, note that there is a small amount of direct reclaim due to kswapd no longer reclaiming the world. ftrace indicates that the direct reclaim stalls are mostly harmless with the vast bulk of the stalls incurred by dd 23 tclsh-3367 38 memcachetest-13733 49 memcachetest-12443 57 tee-3368 1541 dd-13826 1981 dd-12539 A consequence of the direct reclaim for dd is that the processes for the IO workload may show a higher system CPU usage. There is also a risk that kswapd not reclaiming the world may mean that it stays awake balancing zones, does not stall on the appropriate events and continually scans pages it cannot reclaim consuming CPU. This will be visible as continued high CPU usage but in my own tests I only saw a single spike lasting less than a second and I did not observe any problems related to reclaim while running the series on my desktop. This patch: The number of pages kswapd can reclaim is bound by the number of pages it scans which is related to the size of the zone and the scanning priority. In many cases the priority remains low because it's reset every SWAP_CLUSTER_MAX reclaimed pages but in the event kswapd scans a large number of pages it cannot reclaim, it will raise the priority and potentially discard a large percentage of the zone as sc->nr_to_reclaim is ULONG_MAX. The user-visible effect is a reclaim "spike" where a large percentage of memory is suddenly freed. It would be bad enough if this was just unused memory but because of how anon/file pages are balanced it is possible that applications get pushed to swap unnecessarily. This patch limits the number of pages kswapd will reclaim to the high watermark. Reclaim will still overshoot due to it not being a hard limit as shrink_lruvec() will ignore the sc.nr_to_reclaim at DEF_PRIORITY but it prevents kswapd reclaiming the world at higher priorities. The number of pages it reclaims is not adjusted for high-order allocations as kswapd will reclaim excessively if it is to balance zones for high-order allocations. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:42 +07:00
*/
static bool kswapd_shrink_node(pg_data_t *pgdat,
mm, kswapd: replace kswapd compaction with waking up kcompactd Similarly to direct reclaim/compaction, kswapd attempts to combine reclaim and compaction to attempt making memory allocation of given order available. The details differ from direct reclaim e.g. in having high watermark as a goal. The code involved in kswapd's reclaim/compaction decisions has evolved to be quite complex. Testing reveals that it doesn't actually work in at least one scenario, and closer inspection suggests that it could be greatly simplified without compromising on the goal (make high-order page available) or efficiency (don't reclaim too much). The simplification relieas of doing all compaction in kcompactd, which is simply woken up when high watermarks are reached by kswapd's reclaim. The scenario where kswapd compaction doesn't work was found with mmtests test stress-highalloc configured to attempt order-9 allocations without direct reclaim, just waking up kswapd. There was no compaction attempt from kswapd during the whole test. Some added instrumentation shows what happens: - balance_pgdat() sets end_zone to Normal, as it's not balanced - reclaim is attempted on DMA zone, which sets nr_attempted to 99, but it cannot reclaim anything, so sc.nr_reclaimed is 0 - for zones DMA32 and Normal, kswapd_shrink_zone uses testorder=0, so it merely checks if high watermarks were reached for base pages. This is true, so no reclaim is attempted. For DMA, testorder=0 wasn't used, as compaction_suitable() returned COMPACT_SKIPPED - even though the pgdat_needs_compaction flag wasn't set to false, no compaction happens due to the condition sc.nr_reclaimed > nr_attempted being false (as 0 < 99) - priority-- due to nr_reclaimed being 0, repeat until priority reaches 0 pgdat_balanced() is false as only the small zone DMA appears balanced (curiously in that check, watermark appears OK and compaction_suitable() returns COMPACT_PARTIAL, because a lower classzone_idx is used there) Now, even if it was decided that reclaim shouldn't be attempted on the DMA zone, the scenario would be the same, as (sc.nr_reclaimed=0 > nr_attempted=0) is also false. The condition really should use >= as the comment suggests. Then there is a mismatch in the check for setting pgdat_needs_compaction to false using low watermark, while the rest uses high watermark, and who knows what other subtlety. Hopefully this demonstrates that this is unsustainable. Luckily we can simplify this a lot. The reclaim/compaction decisions make sense for direct reclaim scenario, but in kswapd, our primary goal is to reach high watermark in order-0 pages. Afterwards we can attempt compaction just once. Unlike direct reclaim, we don't reclaim extra pages (over the high watermark), the current code already disallows it for good reasons. After this patch, we simply wake up kcompactd to process the pgdat, after we have either succeeded or failed to reach the high watermarks in kswapd, which goes to sleep. We pass kswapd's order and classzone_idx, so kcompactd can apply the same criteria to determine which zones are worth compacting. Note that we use the classzone_idx from wakeup_kswapd(), not balanced_classzone_idx which can include higher zones that kswapd tried to balance too, but didn't consider them in pgdat_balanced(). Since kswapd now cannot create high-order pages itself, we need to adjust how it determines the zones to be balanced. The key element here is adding a "highorder" parameter to zone_balanced, which, when set to false, makes it consider only order-0 watermark instead of the desired higher order (this was done previously by kswapd_shrink_zone(), but not elsewhere). This false is passed for example in pgdat_balanced(). Importantly, wakeup_kswapd() uses true to make sure kswapd and thus kcompactd are woken up for a high-order allocation failure. The last thing is to decide what to do with pageblock_skip bitmap handling. Compaction maintains a pageblock_skip bitmap to record pageblocks where isolation recently failed. This bitmap can be reset by three ways: 1) direct compaction is restarting after going through the full deferred cycle 2) kswapd goes to sleep, and some other direct compaction has previously finished scanning the whole zone and set zone->compact_blockskip_flush. Note that a successful direct compaction clears this flag. 3) compaction was invoked manually via trigger in /proc The case 2) is somewhat fuzzy to begin with, but after introducing kcompactd we should update it. The check for direct compaction in 1), and to set the flush flag in 2) use current_is_kswapd(), which doesn't work for kcompactd. Thus, this patch adds bool direct_compaction to compact_control to use in 2). For the case 1) we remove the check completely - unlike the former kswapd compaction, kcompactd does use the deferred compaction functionality, so flushing tied to restarting from deferred compaction makes sense here. Note that when kswapd goes to sleep, kcompactd is woken up, so it will see the flushed pageblock_skip bits. This is different from when the former kswapd compaction observed the bits and I believe it makes more sense. Kcompactd can afford to be more thorough than a direct compaction trying to limit allocation latency, or kswapd whose primary goal is to reclaim. For testing, I used stress-highalloc configured to do order-9 allocations with GFP_NOWAIT|__GFP_HIGH|__GFP_COMP, so they relied just on kswapd/kcompactd reclaim/compaction (the interfering kernel builds in phases 1 and 2 work as usual): stress-highalloc 4.5-rc1+before 4.5-rc1+after -nodirect -nodirect Success 1 Min 1.00 ( 0.00%) 5.00 (-66.67%) Success 1 Mean 1.40 ( 0.00%) 6.20 (-55.00%) Success 1 Max 2.00 ( 0.00%) 7.00 (-16.67%) Success 2 Min 1.00 ( 0.00%) 5.00 (-66.67%) Success 2 Mean 1.80 ( 0.00%) 6.40 (-52.38%) Success 2 Max 3.00 ( 0.00%) 7.00 (-16.67%) Success 3 Min 34.00 ( 0.00%) 62.00 ( 1.59%) Success 3 Mean 41.80 ( 0.00%) 63.80 ( 1.24%) Success 3 Max 53.00 ( 0.00%) 65.00 ( 2.99%) User 3166.67 3181.09 System 1153.37 1158.25 Elapsed 1768.53 1799.37 4.5-rc1+before 4.5-rc1+after -nodirect -nodirect Direct pages scanned 32938 32797 Kswapd pages scanned 2183166 2202613 Kswapd pages reclaimed 2152359 2143524 Direct pages reclaimed 32735 32545 Percentage direct scans 1% 1% THP fault alloc 579 612 THP collapse alloc 304 316 THP splits 0 0 THP fault fallback 793 778 THP collapse fail 11 16 Compaction stalls 1013 1007 Compaction success 92 67 Compaction failures 920 939 Page migrate success 238457 721374 Page migrate failure 23021 23469 Compaction pages isolated 504695 1479924 Compaction migrate scanned 661390 8812554 Compaction free scanned 13476658 84327916 Compaction cost 262 838 After this patch we see improvements in allocation success rate (especially for phase 3) along with increased compaction activity. The compaction stalls (direct compaction) in the interfering kernel builds (probably THP's) also decreased somewhat thanks to kcompactd activity, yet THP alloc successes improved a bit. Note that elapsed and user time isn't so useful for this benchmark, because of the background interference being unpredictable. It's just to quickly spot some major unexpected differences. System time is somewhat more useful and that didn't increase. Also (after adjusting mmtests' ftrace monitor): Time kswapd awake 2547781 2269241 Time kcompactd awake 0 119253 Time direct compacting 939937 557649 Time kswapd compacting 0 0 Time kcompactd compacting 0 119099 The decrease of overal time spent compacting appears to not match the increased compaction stats. I suspect the tasks get rescheduled and since the ftrace monitor doesn't see that, the reported time is wall time, not CPU time. But arguably direct compactors care about overall latency anyway, whether busy compacting or waiting for CPU doesn't matter. And that latency seems to almost halved. It's also interesting how much time kswapd spent awake just going through all the priorities and failing to even try compacting, over and over. We can also configure stress-highalloc to perform both direct reclaim/compaction and wakeup kswapd/kcompactd, by using GFP_KERNEL|__GFP_HIGH|__GFP_COMP: stress-highalloc 4.5-rc1+before 4.5-rc1+after -direct -direct Success 1 Min 4.00 ( 0.00%) 9.00 (-50.00%) Success 1 Mean 8.00 ( 0.00%) 10.00 (-19.05%) Success 1 Max 12.00 ( 0.00%) 11.00 ( 15.38%) Success 2 Min 4.00 ( 0.00%) 9.00 (-50.00%) Success 2 Mean 8.20 ( 0.00%) 10.00 (-16.28%) Success 2 Max 13.00 ( 0.00%) 11.00 ( 8.33%) Success 3 Min 75.00 ( 0.00%) 74.00 ( 1.33%) Success 3 Mean 75.60 ( 0.00%) 75.20 ( 0.53%) Success 3 Max 77.00 ( 0.00%) 76.00 ( 0.00%) User 3344.73 3246.04 System 1194.24 1172.29 Elapsed 1838.04 1836.76 4.5-rc1+before 4.5-rc1+after -direct -direct Direct pages scanned 125146 120966 Kswapd pages scanned 2119757 2135012 Kswapd pages reclaimed 2073183 2108388 Direct pages reclaimed 124909 120577 Percentage direct scans 5% 5% THP fault alloc 599 652 THP collapse alloc 323 354 THP splits 0 0 THP fault fallback 806 793 THP collapse fail 17 16 Compaction stalls 2457 2025 Compaction success 906 518 Compaction failures 1551 1507 Page migrate success 2031423 2360608 Page migrate failure 32845 40852 Compaction pages isolated 4129761 4802025 Compaction migrate scanned 11996712 21750613 Compaction free scanned 214970969 344372001 Compaction cost 2271 2694 In this scenario, this patch doesn't change the overall success rate as direct compaction already tries all it can. There's however significant reduction in direct compaction stalls (that is, the number of allocations that went into direct compaction). The number of successes (i.e. direct compaction stalls that ended up with successful allocation) is reduced by the same number. This means the offload to kcompactd is working as expected, and direct compaction is reduced either due to detecting contention, or compaction deferred by kcompactd. In the previous version of this patchset there was some apparent reduction of success rate, but the changes in this version (such as using sync compaction only), new baseline kernel, and/or averaging results from 5 executions (my bet), made this go away. Ftrace-based stats seem to roughly agree: Time kswapd awake 2532984 2326824 Time kcompactd awake 0 257916 Time direct compacting 864839 735130 Time kswapd compacting 0 0 Time kcompactd compacting 0 257585 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-18 04:18:15 +07:00
struct scan_control *sc)
mm: vmscan: limit the number of pages kswapd reclaims at each priority This series does not fix all the current known problems with reclaim but it addresses one important swapping bug when there is background IO. Changelog since V3 - Drop the slab shrink changes in light of Glaubers series and discussions highlighted that there were a number of potential problems with the patch. (mel) - Rebased to 3.10-rc1 Changelog since V2 - Preserve ratio properly for proportional scanning (kamezawa) Changelog since V1 - Rename ZONE_DIRTY to ZONE_TAIL_LRU_DIRTY (andi) - Reformat comment in shrink_page_list (andi) - Clarify some comments (dhillf) - Rework how the proportional scanning is preserved - Add PageReclaim check before kswapd starts writeback - Reset sc.nr_reclaimed on every full zone scan Kswapd and page reclaim behaviour has been screwy in one way or the other for a long time. Very broadly speaking it worked in the far past because machines were limited in memory so it did not have that many pages to scan and it stalled congestion_wait() frequently to prevent it going completely nuts. In recent times it has behaved very unsatisfactorily with some of the problems compounded by the removal of stall logic and the introduction of transparent hugepage support with high-order reclaims. There are many variations of bugs that are rooted in this area. One example is reports of a large copy operations or backup causing the machine to grind to a halt or applications pushed to swap. Sometimes in low memory situations a large percentage of memory suddenly gets reclaimed. In other cases an application starts and kswapd hits 100% CPU usage for prolonged periods of time and so on. There is now talk of introducing features like an extra free kbytes tunable to work around aspects of the problem instead of trying to deal with it. It's compounded by the problem that it can be very workload and machine specific. This series aims at addressing some of the worst of these problems without attempting to fundmentally alter how page reclaim works. Patches 1-2 limits the number of pages kswapd reclaims while still obeying the anon/file proportion of the LRUs it should be scanning. Patches 3-4 control how and when kswapd raises its scanning priority and deletes the scanning restart logic which is tricky to follow. Patch 5 notes that it is too easy for kswapd to reach priority 0 when scanning and then reclaim the world. Down with that sort of thing. Patch 6 notes that kswapd starts writeback based on scanning priority which is not necessarily related to dirty pages. It will have kswapd writeback pages if a number of unqueued dirty pages have been recently encountered at the tail of the LRU. Patch 7 notes that sometimes kswapd should stall waiting on IO to complete to reduce LRU churn and the likelihood that it'll reclaim young clean pages or push applications to swap. It will cause kswapd to block on IO if it detects that pages being reclaimed under writeback are recycling through the LRU before the IO completes. Patchies 8-9 are cosmetic but balance_pgdat() is easier to follow after they are applied. This was tested using memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service and it is run multiple times. It starts with no background IO and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. 3.10.0-rc1 3.10.0-rc1 vanilla lessdisrupt-v4 Ops memcachetest-0M 22155.00 ( 0.00%) 22180.00 ( 0.11%) Ops memcachetest-715M 22720.00 ( 0.00%) 22355.00 ( -1.61%) Ops memcachetest-2385M 3939.00 ( 0.00%) 23450.00 (495.33%) Ops memcachetest-4055M 3628.00 ( 0.00%) 24341.00 (570.92%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) Ops io-duration-2385M 118.00 ( 0.00%) 21.00 ( 82.20%) Ops io-duration-4055M 162.00 ( 0.00%) 36.00 ( 77.78%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140134.00 ( 0.00%) 18.00 ( 99.99%) Ops swaptotal-2385M 392438.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 449037.00 ( 0.00%) 27864.00 ( 93.79%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 148031.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 135109.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1529984.00 ( 0.00%) 1530235.00 ( -0.02%) Ops minorfaults-715M 1794168.00 ( 0.00%) 1613750.00 ( 10.06%) Ops minorfaults-2385M 1739813.00 ( 0.00%) 1609396.00 ( 7.50%) Ops minorfaults-4055M 1754460.00 ( 0.00%) 1614810.00 ( 7.96%) Ops majorfaults-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 185.00 ( 0.00%) 180.00 ( 2.70%) Ops majorfaults-2385M 24472.00 ( 0.00%) 101.00 ( 99.59%) Ops majorfaults-4055M 22302.00 ( 0.00%) 229.00 ( 98.97%) Note how the vanilla kernels performance collapses when there is enough IO taking place in the background. This drop in performance is part of what users complain of when they start backups. Note how the swapin and major fault figures indicate that processes were being pushed to swap prematurely. With the series applied, there is no noticable performance drop and while there is still some swap activity, it's tiny. 20 iterations of this test were run in total and averaged. Every 5 iterations, additional IO was generated in the background using dd to measure how the workload was impacted. The 0M, 715M, 2385M and 4055M subblock refer to the amount of IO going on in the background at each iteration. So memcachetest-2385M is reporting how many transactions/second memcachetest recorded on average over 5 iterations while there was 2385M of IO going on in the ground. There are six blocks of information reported here memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 22K/sec to just under 4K/second when there is 2385M of IO going on in the background. This is one type of performance collapse users complain about if a large cp or backup starts in the background io-duration refers to how long it takes for the background IO to complete. It's showing that with the patched kernel that the IO completes faster while not interfering with the memcache workload swaptotal is the total amount of swap traffic. With the patched kernel, the total amount of swapping is much reduced although it is still not zero. swapin in this case is an indication as to whether we are swap trashing. The closer the swapin/swapout ratio is to 1, the worse the trashing is. Note with the patched kernel that there is no swapin activity indicating that all the pages swapped were really inactive unused pages. minorfaults are just minor faults. An increased number of minor faults can indicate that page reclaim is unmapping the pages but not swapping them out before they are faulted back in. With the patched kernel, there is only a small change in minor faults majorfaults are just major faults in the target workload and a high number can indicate that a workload is being prematurely swapped. With the patched kernel, major faults are much reduced. As there are no swapin's recorded so it's not being swapped. The likely explanation is that that libraries or configuration files used by the workload during startup get paged out by the background IO. Overall with the series applied, there is no noticable performance drop due to background IO and while there is still some swap activity, it's tiny and the lack of swapins imply that the swapped pages were inactive and unused. 3.10.0-rc1 3.10.0-rc1 vanilla lessdisrupt-v4 Page Ins 1234608 101892 Page Outs 12446272 11810468 Swap Ins 283406 0 Swap Outs 698469 27882 Direct pages scanned 0 136480 Kswapd pages scanned 6266537 5369364 Kswapd pages reclaimed 1088989 930832 Direct pages reclaimed 0 120901 Kswapd efficiency 17% 17% Kswapd velocity 5398.371 4635.115 Direct efficiency 100% 88% Direct velocity 0.000 117.817 Percentage direct scans 0% 2% Page writes by reclaim 1655843 4009929 Page writes file 957374 3982047 Page writes anon 698469 27882 Page reclaim immediate 5245 1745 Page rescued immediate 0 0 Slabs scanned 33664 25216 Direct inode steals 0 0 Kswapd inode steals 19409 778 Kswapd skipped wait 0 0 THP fault alloc 35 30 THP collapse alloc 472 401 THP splits 27 22 THP fault fallback 0 0 THP collapse fail 0 1 Compaction stalls 0 4 Compaction success 0 0 Compaction failures 0 4 Page migrate success 0 0 Page migrate failure 0 0 Compaction pages isolated 0 0 Compaction migrate scanned 0 0 Compaction free scanned 0 0 Compaction cost 0 0 NUMA PTE updates 0 0 NUMA hint faults 0 0 NUMA hint local faults 0 0 NUMA pages migrated 0 0 AutoNUMA cost 0 0 Unfortunately, note that there is a small amount of direct reclaim due to kswapd no longer reclaiming the world. ftrace indicates that the direct reclaim stalls are mostly harmless with the vast bulk of the stalls incurred by dd 23 tclsh-3367 38 memcachetest-13733 49 memcachetest-12443 57 tee-3368 1541 dd-13826 1981 dd-12539 A consequence of the direct reclaim for dd is that the processes for the IO workload may show a higher system CPU usage. There is also a risk that kswapd not reclaiming the world may mean that it stays awake balancing zones, does not stall on the appropriate events and continually scans pages it cannot reclaim consuming CPU. This will be visible as continued high CPU usage but in my own tests I only saw a single spike lasting less than a second and I did not observe any problems related to reclaim while running the series on my desktop. This patch: The number of pages kswapd can reclaim is bound by the number of pages it scans which is related to the size of the zone and the scanning priority. In many cases the priority remains low because it's reset every SWAP_CLUSTER_MAX reclaimed pages but in the event kswapd scans a large number of pages it cannot reclaim, it will raise the priority and potentially discard a large percentage of the zone as sc->nr_to_reclaim is ULONG_MAX. The user-visible effect is a reclaim "spike" where a large percentage of memory is suddenly freed. It would be bad enough if this was just unused memory but because of how anon/file pages are balanced it is possible that applications get pushed to swap unnecessarily. This patch limits the number of pages kswapd will reclaim to the high watermark. Reclaim will still overshoot due to it not being a hard limit as shrink_lruvec() will ignore the sc.nr_to_reclaim at DEF_PRIORITY but it prevents kswapd reclaiming the world at higher priorities. The number of pages it reclaims is not adjusted for high-order allocations as kswapd will reclaim excessively if it is to balance zones for high-order allocations. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:42 +07:00
{
struct zone *zone;
int z;
mm: vmscan: limit the number of pages kswapd reclaims at each priority This series does not fix all the current known problems with reclaim but it addresses one important swapping bug when there is background IO. Changelog since V3 - Drop the slab shrink changes in light of Glaubers series and discussions highlighted that there were a number of potential problems with the patch. (mel) - Rebased to 3.10-rc1 Changelog since V2 - Preserve ratio properly for proportional scanning (kamezawa) Changelog since V1 - Rename ZONE_DIRTY to ZONE_TAIL_LRU_DIRTY (andi) - Reformat comment in shrink_page_list (andi) - Clarify some comments (dhillf) - Rework how the proportional scanning is preserved - Add PageReclaim check before kswapd starts writeback - Reset sc.nr_reclaimed on every full zone scan Kswapd and page reclaim behaviour has been screwy in one way or the other for a long time. Very broadly speaking it worked in the far past because machines were limited in memory so it did not have that many pages to scan and it stalled congestion_wait() frequently to prevent it going completely nuts. In recent times it has behaved very unsatisfactorily with some of the problems compounded by the removal of stall logic and the introduction of transparent hugepage support with high-order reclaims. There are many variations of bugs that are rooted in this area. One example is reports of a large copy operations or backup causing the machine to grind to a halt or applications pushed to swap. Sometimes in low memory situations a large percentage of memory suddenly gets reclaimed. In other cases an application starts and kswapd hits 100% CPU usage for prolonged periods of time and so on. There is now talk of introducing features like an extra free kbytes tunable to work around aspects of the problem instead of trying to deal with it. It's compounded by the problem that it can be very workload and machine specific. This series aims at addressing some of the worst of these problems without attempting to fundmentally alter how page reclaim works. Patches 1-2 limits the number of pages kswapd reclaims while still obeying the anon/file proportion of the LRUs it should be scanning. Patches 3-4 control how and when kswapd raises its scanning priority and deletes the scanning restart logic which is tricky to follow. Patch 5 notes that it is too easy for kswapd to reach priority 0 when scanning and then reclaim the world. Down with that sort of thing. Patch 6 notes that kswapd starts writeback based on scanning priority which is not necessarily related to dirty pages. It will have kswapd writeback pages if a number of unqueued dirty pages have been recently encountered at the tail of the LRU. Patch 7 notes that sometimes kswapd should stall waiting on IO to complete to reduce LRU churn and the likelihood that it'll reclaim young clean pages or push applications to swap. It will cause kswapd to block on IO if it detects that pages being reclaimed under writeback are recycling through the LRU before the IO completes. Patchies 8-9 are cosmetic but balance_pgdat() is easier to follow after they are applied. This was tested using memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service and it is run multiple times. It starts with no background IO and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. 3.10.0-rc1 3.10.0-rc1 vanilla lessdisrupt-v4 Ops memcachetest-0M 22155.00 ( 0.00%) 22180.00 ( 0.11%) Ops memcachetest-715M 22720.00 ( 0.00%) 22355.00 ( -1.61%) Ops memcachetest-2385M 3939.00 ( 0.00%) 23450.00 (495.33%) Ops memcachetest-4055M 3628.00 ( 0.00%) 24341.00 (570.92%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) Ops io-duration-2385M 118.00 ( 0.00%) 21.00 ( 82.20%) Ops io-duration-4055M 162.00 ( 0.00%) 36.00 ( 77.78%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140134.00 ( 0.00%) 18.00 ( 99.99%) Ops swaptotal-2385M 392438.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 449037.00 ( 0.00%) 27864.00 ( 93.79%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 148031.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 135109.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1529984.00 ( 0.00%) 1530235.00 ( -0.02%) Ops minorfaults-715M 1794168.00 ( 0.00%) 1613750.00 ( 10.06%) Ops minorfaults-2385M 1739813.00 ( 0.00%) 1609396.00 ( 7.50%) Ops minorfaults-4055M 1754460.00 ( 0.00%) 1614810.00 ( 7.96%) Ops majorfaults-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 185.00 ( 0.00%) 180.00 ( 2.70%) Ops majorfaults-2385M 24472.00 ( 0.00%) 101.00 ( 99.59%) Ops majorfaults-4055M 22302.00 ( 0.00%) 229.00 ( 98.97%) Note how the vanilla kernels performance collapses when there is enough IO taking place in the background. This drop in performance is part of what users complain of when they start backups. Note how the swapin and major fault figures indicate that processes were being pushed to swap prematurely. With the series applied, there is no noticable performance drop and while there is still some swap activity, it's tiny. 20 iterations of this test were run in total and averaged. Every 5 iterations, additional IO was generated in the background using dd to measure how the workload was impacted. The 0M, 715M, 2385M and 4055M subblock refer to the amount of IO going on in the background at each iteration. So memcachetest-2385M is reporting how many transactions/second memcachetest recorded on average over 5 iterations while there was 2385M of IO going on in the ground. There are six blocks of information reported here memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 22K/sec to just under 4K/second when there is 2385M of IO going on in the background. This is one type of performance collapse users complain about if a large cp or backup starts in the background io-duration refers to how long it takes for the background IO to complete. It's showing that with the patched kernel that the IO completes faster while not interfering with the memcache workload swaptotal is the total amount of swap traffic. With the patched kernel, the total amount of swapping is much reduced although it is still not zero. swapin in this case is an indication as to whether we are swap trashing. The closer the swapin/swapout ratio is to 1, the worse the trashing is. Note with the patched kernel that there is no swapin activity indicating that all the pages swapped were really inactive unused pages. minorfaults are just minor faults. An increased number of minor faults can indicate that page reclaim is unmapping the pages but not swapping them out before they are faulted back in. With the patched kernel, there is only a small change in minor faults majorfaults are just major faults in the target workload and a high number can indicate that a workload is being prematurely swapped. With the patched kernel, major faults are much reduced. As there are no swapin's recorded so it's not being swapped. The likely explanation is that that libraries or configuration files used by the workload during startup get paged out by the background IO. Overall with the series applied, there is no noticable performance drop due to background IO and while there is still some swap activity, it's tiny and the lack of swapins imply that the swapped pages were inactive and unused. 3.10.0-rc1 3.10.0-rc1 vanilla lessdisrupt-v4 Page Ins 1234608 101892 Page Outs 12446272 11810468 Swap Ins 283406 0 Swap Outs 698469 27882 Direct pages scanned 0 136480 Kswapd pages scanned 6266537 5369364 Kswapd pages reclaimed 1088989 930832 Direct pages reclaimed 0 120901 Kswapd efficiency 17% 17% Kswapd velocity 5398.371 4635.115 Direct efficiency 100% 88% Direct velocity 0.000 117.817 Percentage direct scans 0% 2% Page writes by reclaim 1655843 4009929 Page writes file 957374 3982047 Page writes anon 698469 27882 Page reclaim immediate 5245 1745 Page rescued immediate 0 0 Slabs scanned 33664 25216 Direct inode steals 0 0 Kswapd inode steals 19409 778 Kswapd skipped wait 0 0 THP fault alloc 35 30 THP collapse alloc 472 401 THP splits 27 22 THP fault fallback 0 0 THP collapse fail 0 1 Compaction stalls 0 4 Compaction success 0 0 Compaction failures 0 4 Page migrate success 0 0 Page migrate failure 0 0 Compaction pages isolated 0 0 Compaction migrate scanned 0 0 Compaction free scanned 0 0 Compaction cost 0 0 NUMA PTE updates 0 0 NUMA hint faults 0 0 NUMA hint local faults 0 0 NUMA pages migrated 0 0 AutoNUMA cost 0 0 Unfortunately, note that there is a small amount of direct reclaim due to kswapd no longer reclaiming the world. ftrace indicates that the direct reclaim stalls are mostly harmless with the vast bulk of the stalls incurred by dd 23 tclsh-3367 38 memcachetest-13733 49 memcachetest-12443 57 tee-3368 1541 dd-13826 1981 dd-12539 A consequence of the direct reclaim for dd is that the processes for the IO workload may show a higher system CPU usage. There is also a risk that kswapd not reclaiming the world may mean that it stays awake balancing zones, does not stall on the appropriate events and continually scans pages it cannot reclaim consuming CPU. This will be visible as continued high CPU usage but in my own tests I only saw a single spike lasting less than a second and I did not observe any problems related to reclaim while running the series on my desktop. This patch: The number of pages kswapd can reclaim is bound by the number of pages it scans which is related to the size of the zone and the scanning priority. In many cases the priority remains low because it's reset every SWAP_CLUSTER_MAX reclaimed pages but in the event kswapd scans a large number of pages it cannot reclaim, it will raise the priority and potentially discard a large percentage of the zone as sc->nr_to_reclaim is ULONG_MAX. The user-visible effect is a reclaim "spike" where a large percentage of memory is suddenly freed. It would be bad enough if this was just unused memory but because of how anon/file pages are balanced it is possible that applications get pushed to swap unnecessarily. This patch limits the number of pages kswapd will reclaim to the high watermark. Reclaim will still overshoot due to it not being a hard limit as shrink_lruvec() will ignore the sc.nr_to_reclaim at DEF_PRIORITY but it prevents kswapd reclaiming the world at higher priorities. The number of pages it reclaims is not adjusted for high-order allocations as kswapd will reclaim excessively if it is to balance zones for high-order allocations. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:42 +07:00
/* Reclaim a number of pages proportional to the number of zones */
sc->nr_to_reclaim = 0;
for (z = 0; z <= sc->reclaim_idx; z++) {
zone = pgdat->node_zones + z;
if (!populated_zone(zone))
continue;
sc->nr_to_reclaim += max(high_wmark_pages(zone), SWAP_CLUSTER_MAX);
}
/*
* Historically care was taken to put equal pressure on all zones but
* now pressure is applied based on node LRU order.
*/
shrink_node(pgdat, sc);
mm: vmscan: block kswapd if it is encountering pages under writeback Historically, kswapd used to congestion_wait() at higher priorities if it was not making forward progress. This made no sense as the failure to make progress could be completely independent of IO. It was later replaced by wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't wait on congested zones in balance_pgdat()) as it was duplicating logic in shrink_inactive_list(). This is problematic. If kswapd encounters many pages under writeback and it continues to scan until it reaches the high watermark then it will quickly skip over the pages under writeback and reclaim clean young pages or push applications out to swap. The use of wait_iff_congested() is not suited to kswapd as it will only stall if the underlying BDI is really congested or a direct reclaimer was unable to write to the underlying BDI. kswapd bypasses the BDI congestion as it sets PF_SWAPWRITE but even if this was taken into account then it would cause direct reclaimers to stall on writeback which is not desirable. This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is encountering too many pages under writeback. If this flag is set and kswapd encounters a PageReclaim page under writeback then it'll assume that the LRU lists are being recycled too quickly before IO can complete and block waiting for some IO to complete. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:51 +07:00
/*
* Fragmentation may mean that the system cannot be rebalanced for
* high-order allocations. If twice the allocation size has been
* reclaimed then recheck watermarks only at order-0 to prevent
* excessive reclaim. Assume that a process requested a high-order
* can direct reclaim/compact.
*/
if (sc->order && sc->nr_reclaimed >= 2UL << sc->order)
sc->order = 0;
mm: vmscan: flatten kswapd priority loop kswapd stops raising the scanning priority when at least SWAP_CLUSTER_MAX pages have been reclaimed or the pgdat is considered balanced. It then rechecks if it needs to restart at DEF_PRIORITY and whether high-order reclaim needs to be reset. This is not wrong per-se but it is confusing to follow and forcing kswapd to stay at DEF_PRIORITY may require several restarts before it has scanned enough pages to meet the high watermark even at 100% efficiency. This patch irons out the logic a bit by controlling when priority is raised and removing the "goto loop_again". This patch has kswapd raise the scanning priority until it is scanning enough pages that it could meet the high watermark in one shrink of the LRU lists if it is able to reclaim at 100% efficiency. It will not raise the scanning prioirty higher unless it is failing to reclaim any pages. To avoid infinite looping for high-order allocation requests kswapd will not reclaim for high-order allocations when it has reclaimed at least twice the number of pages as the allocation request. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:45 +07:00
return sc->nr_scanned >= sc->nr_to_reclaim;
mm: vmscan: limit the number of pages kswapd reclaims at each priority This series does not fix all the current known problems with reclaim but it addresses one important swapping bug when there is background IO. Changelog since V3 - Drop the slab shrink changes in light of Glaubers series and discussions highlighted that there were a number of potential problems with the patch. (mel) - Rebased to 3.10-rc1 Changelog since V2 - Preserve ratio properly for proportional scanning (kamezawa) Changelog since V1 - Rename ZONE_DIRTY to ZONE_TAIL_LRU_DIRTY (andi) - Reformat comment in shrink_page_list (andi) - Clarify some comments (dhillf) - Rework how the proportional scanning is preserved - Add PageReclaim check before kswapd starts writeback - Reset sc.nr_reclaimed on every full zone scan Kswapd and page reclaim behaviour has been screwy in one way or the other for a long time. Very broadly speaking it worked in the far past because machines were limited in memory so it did not have that many pages to scan and it stalled congestion_wait() frequently to prevent it going completely nuts. In recent times it has behaved very unsatisfactorily with some of the problems compounded by the removal of stall logic and the introduction of transparent hugepage support with high-order reclaims. There are many variations of bugs that are rooted in this area. One example is reports of a large copy operations or backup causing the machine to grind to a halt or applications pushed to swap. Sometimes in low memory situations a large percentage of memory suddenly gets reclaimed. In other cases an application starts and kswapd hits 100% CPU usage for prolonged periods of time and so on. There is now talk of introducing features like an extra free kbytes tunable to work around aspects of the problem instead of trying to deal with it. It's compounded by the problem that it can be very workload and machine specific. This series aims at addressing some of the worst of these problems without attempting to fundmentally alter how page reclaim works. Patches 1-2 limits the number of pages kswapd reclaims while still obeying the anon/file proportion of the LRUs it should be scanning. Patches 3-4 control how and when kswapd raises its scanning priority and deletes the scanning restart logic which is tricky to follow. Patch 5 notes that it is too easy for kswapd to reach priority 0 when scanning and then reclaim the world. Down with that sort of thing. Patch 6 notes that kswapd starts writeback based on scanning priority which is not necessarily related to dirty pages. It will have kswapd writeback pages if a number of unqueued dirty pages have been recently encountered at the tail of the LRU. Patch 7 notes that sometimes kswapd should stall waiting on IO to complete to reduce LRU churn and the likelihood that it'll reclaim young clean pages or push applications to swap. It will cause kswapd to block on IO if it detects that pages being reclaimed under writeback are recycling through the LRU before the IO completes. Patchies 8-9 are cosmetic but balance_pgdat() is easier to follow after they are applied. This was tested using memcached+memcachetest while some background IO was in progress as implemented by the parallel IO tests implement in MM Tests. memcachetest benchmarks how many operations/second memcached can service and it is run multiple times. It starts with no background IO and then re-runs the test with larger amounts of IO in the background to roughly simulate a large copy in progress. The expectation is that the IO should have little or no impact on memcachetest which is running entirely in memory. 3.10.0-rc1 3.10.0-rc1 vanilla lessdisrupt-v4 Ops memcachetest-0M 22155.00 ( 0.00%) 22180.00 ( 0.11%) Ops memcachetest-715M 22720.00 ( 0.00%) 22355.00 ( -1.61%) Ops memcachetest-2385M 3939.00 ( 0.00%) 23450.00 (495.33%) Ops memcachetest-4055M 3628.00 ( 0.00%) 24341.00 (570.92%) Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) Ops io-duration-2385M 118.00 ( 0.00%) 21.00 ( 82.20%) Ops io-duration-4055M 162.00 ( 0.00%) 36.00 ( 77.78%) Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-715M 140134.00 ( 0.00%) 18.00 ( 99.99%) Ops swaptotal-2385M 392438.00 ( 0.00%) 0.00 ( 0.00%) Ops swaptotal-4055M 449037.00 ( 0.00%) 27864.00 ( 93.79%) Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-715M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-2385M 148031.00 ( 0.00%) 0.00 ( 0.00%) Ops swapin-4055M 135109.00 ( 0.00%) 0.00 ( 0.00%) Ops minorfaults-0M 1529984.00 ( 0.00%) 1530235.00 ( -0.02%) Ops minorfaults-715M 1794168.00 ( 0.00%) 1613750.00 ( 10.06%) Ops minorfaults-2385M 1739813.00 ( 0.00%) 1609396.00 ( 7.50%) Ops minorfaults-4055M 1754460.00 ( 0.00%) 1614810.00 ( 7.96%) Ops majorfaults-0M 0.00 ( 0.00%) 0.00 ( 0.00%) Ops majorfaults-715M 185.00 ( 0.00%) 180.00 ( 2.70%) Ops majorfaults-2385M 24472.00 ( 0.00%) 101.00 ( 99.59%) Ops majorfaults-4055M 22302.00 ( 0.00%) 229.00 ( 98.97%) Note how the vanilla kernels performance collapses when there is enough IO taking place in the background. This drop in performance is part of what users complain of when they start backups. Note how the swapin and major fault figures indicate that processes were being pushed to swap prematurely. With the series applied, there is no noticable performance drop and while there is still some swap activity, it's tiny. 20 iterations of this test were run in total and averaged. Every 5 iterations, additional IO was generated in the background using dd to measure how the workload was impacted. The 0M, 715M, 2385M and 4055M subblock refer to the amount of IO going on in the background at each iteration. So memcachetest-2385M is reporting how many transactions/second memcachetest recorded on average over 5 iterations while there was 2385M of IO going on in the ground. There are six blocks of information reported here memcachetest is the transactions/second reported by memcachetest. In the vanilla kernel note that performance drops from around 22K/sec to just under 4K/second when there is 2385M of IO going on in the background. This is one type of performance collapse users complain about if a large cp or backup starts in the background io-duration refers to how long it takes for the background IO to complete. It's showing that with the patched kernel that the IO completes faster while not interfering with the memcache workload swaptotal is the total amount of swap traffic. With the patched kernel, the total amount of swapping is much reduced although it is still not zero. swapin in this case is an indication as to whether we are swap trashing. The closer the swapin/swapout ratio is to 1, the worse the trashing is. Note with the patched kernel that there is no swapin activity indicating that all the pages swapped were really inactive unused pages. minorfaults are just minor faults. An increased number of minor faults can indicate that page reclaim is unmapping the pages but not swapping them out before they are faulted back in. With the patched kernel, there is only a small change in minor faults majorfaults are just major faults in the target workload and a high number can indicate that a workload is being prematurely swapped. With the patched kernel, major faults are much reduced. As there are no swapin's recorded so it's not being swapped. The likely explanation is that that libraries or configuration files used by the workload during startup get paged out by the background IO. Overall with the series applied, there is no noticable performance drop due to background IO and while there is still some swap activity, it's tiny and the lack of swapins imply that the swapped pages were inactive and unused. 3.10.0-rc1 3.10.0-rc1 vanilla lessdisrupt-v4 Page Ins 1234608 101892 Page Outs 12446272 11810468 Swap Ins 283406 0 Swap Outs 698469 27882 Direct pages scanned 0 136480 Kswapd pages scanned 6266537 5369364 Kswapd pages reclaimed 1088989 930832 Direct pages reclaimed 0 120901 Kswapd efficiency 17% 17% Kswapd velocity 5398.371 4635.115 Direct efficiency 100% 88% Direct velocity 0.000 117.817 Percentage direct scans 0% 2% Page writes by reclaim 1655843 4009929 Page writes file 957374 3982047 Page writes anon 698469 27882 Page reclaim immediate 5245 1745 Page rescued immediate 0 0 Slabs scanned 33664 25216 Direct inode steals 0 0 Kswapd inode steals 19409 778 Kswapd skipped wait 0 0 THP fault alloc 35 30 THP collapse alloc 472 401 THP splits 27 22 THP fault fallback 0 0 THP collapse fail 0 1 Compaction stalls 0 4 Compaction success 0 0 Compaction failures 0 4 Page migrate success 0 0 Page migrate failure 0 0 Compaction pages isolated 0 0 Compaction migrate scanned 0 0 Compaction free scanned 0 0 Compaction cost 0 0 NUMA PTE updates 0 0 NUMA hint faults 0 0 NUMA hint local faults 0 0 NUMA pages migrated 0 0 AutoNUMA cost 0 0 Unfortunately, note that there is a small amount of direct reclaim due to kswapd no longer reclaiming the world. ftrace indicates that the direct reclaim stalls are mostly harmless with the vast bulk of the stalls incurred by dd 23 tclsh-3367 38 memcachetest-13733 49 memcachetest-12443 57 tee-3368 1541 dd-13826 1981 dd-12539 A consequence of the direct reclaim for dd is that the processes for the IO workload may show a higher system CPU usage. There is also a risk that kswapd not reclaiming the world may mean that it stays awake balancing zones, does not stall on the appropriate events and continually scans pages it cannot reclaim consuming CPU. This will be visible as continued high CPU usage but in my own tests I only saw a single spike lasting less than a second and I did not observe any problems related to reclaim while running the series on my desktop. This patch: The number of pages kswapd can reclaim is bound by the number of pages it scans which is related to the size of the zone and the scanning priority. In many cases the priority remains low because it's reset every SWAP_CLUSTER_MAX reclaimed pages but in the event kswapd scans a large number of pages it cannot reclaim, it will raise the priority and potentially discard a large percentage of the zone as sc->nr_to_reclaim is ULONG_MAX. The user-visible effect is a reclaim "spike" where a large percentage of memory is suddenly freed. It would be bad enough if this was just unused memory but because of how anon/file pages are balanced it is possible that applications get pushed to swap unnecessarily. This patch limits the number of pages kswapd will reclaim to the high watermark. Reclaim will still overshoot due to it not being a hard limit as shrink_lruvec() will ignore the sc.nr_to_reclaim at DEF_PRIORITY but it prevents kswapd reclaiming the world at higher priorities. The number of pages it reclaims is not adjusted for high-order allocations as kswapd will reclaim excessively if it is to balance zones for high-order allocations. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:42 +07:00
}
/*
* For kswapd, balance_pgdat() will reclaim pages across a node from zones
* that are eligible for use by the caller until at least one zone is
* balanced.
*
* Returns the order kswapd finished reclaiming at.
*
* kswapd scans the zones in the highmem->normal->dma direction. It skips
* zones which have free_pages > high_wmark_pages(zone), but once a zone is
* found to have free_pages <= high_wmark_pages(zone), any page is that zone
* or lower is eligible for reclaim until at least one usable zone is
* balanced.
*/
mm, kswapd: replace kswapd compaction with waking up kcompactd Similarly to direct reclaim/compaction, kswapd attempts to combine reclaim and compaction to attempt making memory allocation of given order available. The details differ from direct reclaim e.g. in having high watermark as a goal. The code involved in kswapd's reclaim/compaction decisions has evolved to be quite complex. Testing reveals that it doesn't actually work in at least one scenario, and closer inspection suggests that it could be greatly simplified without compromising on the goal (make high-order page available) or efficiency (don't reclaim too much). The simplification relieas of doing all compaction in kcompactd, which is simply woken up when high watermarks are reached by kswapd's reclaim. The scenario where kswapd compaction doesn't work was found with mmtests test stress-highalloc configured to attempt order-9 allocations without direct reclaim, just waking up kswapd. There was no compaction attempt from kswapd during the whole test. Some added instrumentation shows what happens: - balance_pgdat() sets end_zone to Normal, as it's not balanced - reclaim is attempted on DMA zone, which sets nr_attempted to 99, but it cannot reclaim anything, so sc.nr_reclaimed is 0 - for zones DMA32 and Normal, kswapd_shrink_zone uses testorder=0, so it merely checks if high watermarks were reached for base pages. This is true, so no reclaim is attempted. For DMA, testorder=0 wasn't used, as compaction_suitable() returned COMPACT_SKIPPED - even though the pgdat_needs_compaction flag wasn't set to false, no compaction happens due to the condition sc.nr_reclaimed > nr_attempted being false (as 0 < 99) - priority-- due to nr_reclaimed being 0, repeat until priority reaches 0 pgdat_balanced() is false as only the small zone DMA appears balanced (curiously in that check, watermark appears OK and compaction_suitable() returns COMPACT_PARTIAL, because a lower classzone_idx is used there) Now, even if it was decided that reclaim shouldn't be attempted on the DMA zone, the scenario would be the same, as (sc.nr_reclaimed=0 > nr_attempted=0) is also false. The condition really should use >= as the comment suggests. Then there is a mismatch in the check for setting pgdat_needs_compaction to false using low watermark, while the rest uses high watermark, and who knows what other subtlety. Hopefully this demonstrates that this is unsustainable. Luckily we can simplify this a lot. The reclaim/compaction decisions make sense for direct reclaim scenario, but in kswapd, our primary goal is to reach high watermark in order-0 pages. Afterwards we can attempt compaction just once. Unlike direct reclaim, we don't reclaim extra pages (over the high watermark), the current code already disallows it for good reasons. After this patch, we simply wake up kcompactd to process the pgdat, after we have either succeeded or failed to reach the high watermarks in kswapd, which goes to sleep. We pass kswapd's order and classzone_idx, so kcompactd can apply the same criteria to determine which zones are worth compacting. Note that we use the classzone_idx from wakeup_kswapd(), not balanced_classzone_idx which can include higher zones that kswapd tried to balance too, but didn't consider them in pgdat_balanced(). Since kswapd now cannot create high-order pages itself, we need to adjust how it determines the zones to be balanced. The key element here is adding a "highorder" parameter to zone_balanced, which, when set to false, makes it consider only order-0 watermark instead of the desired higher order (this was done previously by kswapd_shrink_zone(), but not elsewhere). This false is passed for example in pgdat_balanced(). Importantly, wakeup_kswapd() uses true to make sure kswapd and thus kcompactd are woken up for a high-order allocation failure. The last thing is to decide what to do with pageblock_skip bitmap handling. Compaction maintains a pageblock_skip bitmap to record pageblocks where isolation recently failed. This bitmap can be reset by three ways: 1) direct compaction is restarting after going through the full deferred cycle 2) kswapd goes to sleep, and some other direct compaction has previously finished scanning the whole zone and set zone->compact_blockskip_flush. Note that a successful direct compaction clears this flag. 3) compaction was invoked manually via trigger in /proc The case 2) is somewhat fuzzy to begin with, but after introducing kcompactd we should update it. The check for direct compaction in 1), and to set the flush flag in 2) use current_is_kswapd(), which doesn't work for kcompactd. Thus, this patch adds bool direct_compaction to compact_control to use in 2). For the case 1) we remove the check completely - unlike the former kswapd compaction, kcompactd does use the deferred compaction functionality, so flushing tied to restarting from deferred compaction makes sense here. Note that when kswapd goes to sleep, kcompactd is woken up, so it will see the flushed pageblock_skip bits. This is different from when the former kswapd compaction observed the bits and I believe it makes more sense. Kcompactd can afford to be more thorough than a direct compaction trying to limit allocation latency, or kswapd whose primary goal is to reclaim. For testing, I used stress-highalloc configured to do order-9 allocations with GFP_NOWAIT|__GFP_HIGH|__GFP_COMP, so they relied just on kswapd/kcompactd reclaim/compaction (the interfering kernel builds in phases 1 and 2 work as usual): stress-highalloc 4.5-rc1+before 4.5-rc1+after -nodirect -nodirect Success 1 Min 1.00 ( 0.00%) 5.00 (-66.67%) Success 1 Mean 1.40 ( 0.00%) 6.20 (-55.00%) Success 1 Max 2.00 ( 0.00%) 7.00 (-16.67%) Success 2 Min 1.00 ( 0.00%) 5.00 (-66.67%) Success 2 Mean 1.80 ( 0.00%) 6.40 (-52.38%) Success 2 Max 3.00 ( 0.00%) 7.00 (-16.67%) Success 3 Min 34.00 ( 0.00%) 62.00 ( 1.59%) Success 3 Mean 41.80 ( 0.00%) 63.80 ( 1.24%) Success 3 Max 53.00 ( 0.00%) 65.00 ( 2.99%) User 3166.67 3181.09 System 1153.37 1158.25 Elapsed 1768.53 1799.37 4.5-rc1+before 4.5-rc1+after -nodirect -nodirect Direct pages scanned 32938 32797 Kswapd pages scanned 2183166 2202613 Kswapd pages reclaimed 2152359 2143524 Direct pages reclaimed 32735 32545 Percentage direct scans 1% 1% THP fault alloc 579 612 THP collapse alloc 304 316 THP splits 0 0 THP fault fallback 793 778 THP collapse fail 11 16 Compaction stalls 1013 1007 Compaction success 92 67 Compaction failures 920 939 Page migrate success 238457 721374 Page migrate failure 23021 23469 Compaction pages isolated 504695 1479924 Compaction migrate scanned 661390 8812554 Compaction free scanned 13476658 84327916 Compaction cost 262 838 After this patch we see improvements in allocation success rate (especially for phase 3) along with increased compaction activity. The compaction stalls (direct compaction) in the interfering kernel builds (probably THP's) also decreased somewhat thanks to kcompactd activity, yet THP alloc successes improved a bit. Note that elapsed and user time isn't so useful for this benchmark, because of the background interference being unpredictable. It's just to quickly spot some major unexpected differences. System time is somewhat more useful and that didn't increase. Also (after adjusting mmtests' ftrace monitor): Time kswapd awake 2547781 2269241 Time kcompactd awake 0 119253 Time direct compacting 939937 557649 Time kswapd compacting 0 0 Time kcompactd compacting 0 119099 The decrease of overal time spent compacting appears to not match the increased compaction stats. I suspect the tasks get rescheduled and since the ftrace monitor doesn't see that, the reported time is wall time, not CPU time. But arguably direct compactors care about overall latency anyway, whether busy compacting or waiting for CPU doesn't matter. And that latency seems to almost halved. It's also interesting how much time kswapd spent awake just going through all the priorities and failing to even try compacting, over and over. We can also configure stress-highalloc to perform both direct reclaim/compaction and wakeup kswapd/kcompactd, by using GFP_KERNEL|__GFP_HIGH|__GFP_COMP: stress-highalloc 4.5-rc1+before 4.5-rc1+after -direct -direct Success 1 Min 4.00 ( 0.00%) 9.00 (-50.00%) Success 1 Mean 8.00 ( 0.00%) 10.00 (-19.05%) Success 1 Max 12.00 ( 0.00%) 11.00 ( 15.38%) Success 2 Min 4.00 ( 0.00%) 9.00 (-50.00%) Success 2 Mean 8.20 ( 0.00%) 10.00 (-16.28%) Success 2 Max 13.00 ( 0.00%) 11.00 ( 8.33%) Success 3 Min 75.00 ( 0.00%) 74.00 ( 1.33%) Success 3 Mean 75.60 ( 0.00%) 75.20 ( 0.53%) Success 3 Max 77.00 ( 0.00%) 76.00 ( 0.00%) User 3344.73 3246.04 System 1194.24 1172.29 Elapsed 1838.04 1836.76 4.5-rc1+before 4.5-rc1+after -direct -direct Direct pages scanned 125146 120966 Kswapd pages scanned 2119757 2135012 Kswapd pages reclaimed 2073183 2108388 Direct pages reclaimed 124909 120577 Percentage direct scans 5% 5% THP fault alloc 599 652 THP collapse alloc 323 354 THP splits 0 0 THP fault fallback 806 793 THP collapse fail 17 16 Compaction stalls 2457 2025 Compaction success 906 518 Compaction failures 1551 1507 Page migrate success 2031423 2360608 Page migrate failure 32845 40852 Compaction pages isolated 4129761 4802025 Compaction migrate scanned 11996712 21750613 Compaction free scanned 214970969 344372001 Compaction cost 2271 2694 In this scenario, this patch doesn't change the overall success rate as direct compaction already tries all it can. There's however significant reduction in direct compaction stalls (that is, the number of allocations that went into direct compaction). The number of successes (i.e. direct compaction stalls that ended up with successful allocation) is reduced by the same number. This means the offload to kcompactd is working as expected, and direct compaction is reduced either due to detecting contention, or compaction deferred by kcompactd. In the previous version of this patchset there was some apparent reduction of success rate, but the changes in this version (such as using sync compaction only), new baseline kernel, and/or averaging results from 5 executions (my bet), made this go away. Ftrace-based stats seem to roughly agree: Time kswapd awake 2532984 2326824 Time kcompactd awake 0 257916 Time direct compacting 864839 735130 Time kswapd compacting 0 0 Time kcompactd compacting 0 257585 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-18 04:18:15 +07:00
static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
{
int i;
unsigned long nr_soft_reclaimed;
unsigned long nr_soft_scanned;
struct zone *zone;
struct scan_control sc = {
.gfp_mask = GFP_KERNEL,
.order = order,
mm: vmscan: flatten kswapd priority loop kswapd stops raising the scanning priority when at least SWAP_CLUSTER_MAX pages have been reclaimed or the pgdat is considered balanced. It then rechecks if it needs to restart at DEF_PRIORITY and whether high-order reclaim needs to be reset. This is not wrong per-se but it is confusing to follow and forcing kswapd to stay at DEF_PRIORITY may require several restarts before it has scanned enough pages to meet the high watermark even at 100% efficiency. This patch irons out the logic a bit by controlling when priority is raised and removing the "goto loop_again". This patch has kswapd raise the scanning priority until it is scanning enough pages that it could meet the high watermark in one shrink of the LRU lists if it is able to reclaim at 100% efficiency. It will not raise the scanning prioirty higher unless it is failing to reclaim any pages. To avoid infinite looping for high-order allocation requests kswapd will not reclaim for high-order allocations when it has reclaimed at least twice the number of pages as the allocation request. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:45 +07:00
.priority = DEF_PRIORITY,
.may_writepage = !laptop_mode,
.may_unmap = 1,
.may_swap = 1,
};
[PATCH] Light weight event counters The remaining counters in page_state after the zoned VM counter patches have been applied are all just for show in /proc/vmstat. They have no essential function for the VM. We use a simple increment of per cpu variables. In order to avoid the most severe races we disable preempt. Preempt does not prevent the race between an increment and an interrupt handler incrementing the same statistics counter. However, that race is exceedingly rare, we may only loose one increment or so and there is no requirement (at least not in kernel) that the vm event counters have to be accurate. In the non preempt case this results in a simple increment for each counter. For many architectures this will be reduced by the compiler to a single instruction. This single instruction is atomic for i386 and x86_64. And therefore even the rare race condition in an interrupt is avoided for both architectures in most cases. The patchset also adds an off switch for embedded systems that allows a building of linux kernels without these counters. The implementation of these counters is through inline code that hopefully results in only a single instruction increment instruction being emitted (i386, x86_64) or in the increment being hidden though instruction concurrency (EPIC architectures such as ia64 can get that done). Benefits: - VM event counter operations usually reduce to a single inline instruction on i386 and x86_64. - No interrupt disable, only preempt disable for the preempt case. Preempt disable can also be avoided by moving the counter into a spinlock. - Handling is similar to zoned VM counters. - Simple and easily extendable. - Can be omitted to reduce memory use for embedded use. References: RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=113512330605497&w=2 RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=114988082814934&w=2 local_t http://marc.theaimsgroup.com/?l=linux-kernel&m=114991748606690&w=2 V2 http://marc.theaimsgroup.com/?t=115014808400007&r=1&w=2 V3 http://marc.theaimsgroup.com/?l=linux-kernel&m=115024767022346&w=2 V4 http://marc.theaimsgroup.com/?l=linux-kernel&m=115047968808926&w=2 Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 15:55:45 +07:00
count_vm_event(PAGEOUTRUN);
do {
mm: vmscan: flatten kswapd priority loop kswapd stops raising the scanning priority when at least SWAP_CLUSTER_MAX pages have been reclaimed or the pgdat is considered balanced. It then rechecks if it needs to restart at DEF_PRIORITY and whether high-order reclaim needs to be reset. This is not wrong per-se but it is confusing to follow and forcing kswapd to stay at DEF_PRIORITY may require several restarts before it has scanned enough pages to meet the high watermark even at 100% efficiency. This patch irons out the logic a bit by controlling when priority is raised and removing the "goto loop_again". This patch has kswapd raise the scanning priority until it is scanning enough pages that it could meet the high watermark in one shrink of the LRU lists if it is able to reclaim at 100% efficiency. It will not raise the scanning prioirty higher unless it is failing to reclaim any pages. To avoid infinite looping for high-order allocation requests kswapd will not reclaim for high-order allocations when it has reclaimed at least twice the number of pages as the allocation request. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:45 +07:00
bool raise_priority = true;
sc.nr_reclaimed = 0;
sc.reclaim_idx = classzone_idx;
/*
* If the number of buffer_heads exceeds the maximum allowed
* then consider reclaiming from all zones. This has a dual
* purpose -- on 64-bit systems it is expected that
* buffer_heads are stripped during active rotation. On 32-bit
* systems, highmem pages can pin lowmem memory and shrinking
* buffers can relieve lowmem pressure. Reclaim may still not
* go ahead if all eligible zones for the original allocation
* request are balanced to avoid excessive reclaim from kswapd.
*/
if (buffer_heads_over_limit) {
for (i = MAX_NR_ZONES - 1; i >= 0; i--) {
zone = pgdat->node_zones + i;
if (!populated_zone(zone))
continue;
mm: vmscan: forcibly scan highmem if there are too many buffer_heads pinning highmem Stuart Foster reported on bugzilla that copying large amounts of data from NTFS caused an OOM kill on 32-bit X86 with 16G of memory. Andrew Morton correctly identified that the problem was NTFS was using 512 blocks meaning each page had 8 buffer_heads in low memory pinning it. In the past, direct reclaim used to scan highmem even if the allocating process did not specify __GFP_HIGHMEM but not any more. kswapd no longer will reclaim from zones that are above the high watermark. The intention in both cases was to minimise unnecessary reclaim. The downside is on machines with large amounts of highmem that lowmem can be fully consumed by buffer_heads with nothing trying to free them. The following patch is based on a suggestion by Andrew Morton to extend the buffer_heads_over_limit case to force kswapd and direct reclaim to scan the highmem zone regardless of the allocation request or watermarks. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42578 [hughd@google.com: move buffer_heads_over_limit check up] [akpm@linux-foundation.org: buffer_heads_over_limit is unlikely] Reported-by: Stuart Foster <smf.linux@ntlworld.com> Tested-by: Stuart Foster <smf.linux@ntlworld.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 06:34:00 +07:00
sc.reclaim_idx = i;
break;
}
}
/*
* Only reclaim if there are no eligible zones. Check from
* high to low zone as allocations prefer higher zones.
* Scanning from low to high zone would allow congestion to be
* cleared during a very small window when a small low
* zone was balanced even under extreme pressure when the
* overall node may be congested. Note that sc.reclaim_idx
* is not used as buffer_heads_over_limit may have adjusted
* it.
*/
for (i = classzone_idx; i >= 0; i--) {
zone = pgdat->node_zones + i;
if (!populated_zone(zone))
continue;
if (zone_balanced(zone, sc.order, classzone_idx))
goto out;
}
/*
* Do some background aging of the anon list, to give
* pages a chance to be referenced before reclaiming. All
* pages are rotated regardless of classzone as this is
* about consistent aging.
*/
age_active_anon(pgdat, &sc);
/*
* If we're getting trouble reclaiming, start doing writepage
* even in laptop mode.
*/
if (sc.priority < DEF_PRIORITY - 2 || !pgdat_reclaimable(pgdat))
sc.may_writepage = 1;
/* Call soft limit reclaim before calling shrink_node. */
sc.nr_scanned = 0;
nr_soft_scanned = 0;
nr_soft_reclaimed = mem_cgroup_soft_limit_reclaim(pgdat, sc.order,
sc.gfp_mask, &nr_soft_scanned);
sc.nr_reclaimed += nr_soft_reclaimed;
/*
* There should be no need to raise the scanning priority if
* enough pages are already being scanned that that high
* watermark would be met at 100% efficiency.
*/
if (kswapd_shrink_node(pgdat, &sc))
raise_priority = false;
/*
* If the low watermark is met there is no need for processes
* to be throttled on pfmemalloc_wait as they should not be
* able to safely make forward progress. Wake them
*/
if (waitqueue_active(&pgdat->pfmemalloc_wait) &&
pfmemalloc_watermark_ok(pgdat))
wake_up_all(&pgdat->pfmemalloc_wait);
mm: vmscan: flatten kswapd priority loop kswapd stops raising the scanning priority when at least SWAP_CLUSTER_MAX pages have been reclaimed or the pgdat is considered balanced. It then rechecks if it needs to restart at DEF_PRIORITY and whether high-order reclaim needs to be reset. This is not wrong per-se but it is confusing to follow and forcing kswapd to stay at DEF_PRIORITY may require several restarts before it has scanned enough pages to meet the high watermark even at 100% efficiency. This patch irons out the logic a bit by controlling when priority is raised and removing the "goto loop_again". This patch has kswapd raise the scanning priority until it is scanning enough pages that it could meet the high watermark in one shrink of the LRU lists if it is able to reclaim at 100% efficiency. It will not raise the scanning prioirty higher unless it is failing to reclaim any pages. To avoid infinite looping for high-order allocation requests kswapd will not reclaim for high-order allocations when it has reclaimed at least twice the number of pages as the allocation request. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:45 +07:00
/* Check if kswapd should be suspending */
if (try_to_freeze() || kthread_should_stop())
break;
[PATCH] swsusp: Improve handling of highmem Currently swsusp saves the contents of highmem pages by copying them to the normal zone which is quite inefficient (eg. it requires two normal pages to be used for saving one highmem page). This may be improved by using highmem for saving the contents of saveable highmem pages. Namely, during the suspend phase of the suspend-resume cycle we try to allocate as many free highmem pages as there are saveable highmem pages. If there are not enough highmem image pages to store the contents of all of the saveable highmem pages, some of them will be stored in the "normal" memory. Next, we allocate as many free "normal" pages as needed to store the (remaining) image data. We use a memory bitmap to mark the allocated free pages (ie. highmem as well as "normal" image pages). Now, we use another memory bitmap to mark all of the saveable pages (highmem as well as "normal") and the contents of the saveable pages are copied into the image pages. Then, the second bitmap is used to save the pfns corresponding to the saveable pages and the first one is used to save their data. During the resume phase the pfns of the pages that were saveable during the suspend are loaded from the image and used to mark the "unsafe" page frames. Next, we try to allocate as many free highmem page frames as to load all of the image data that had been in the highmem before the suspend and we allocate so many free "normal" page frames that the total number of allocated free pages (highmem and "normal") is equal to the size of the image. While doing this we have to make sure that there will be some extra free "normal" and "safe" page frames for two lists of PBEs constructed later. Now, the image data are loaded, if possible, into their "original" page frames. The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in one of two lists of PBEs. One list of PBEs is for the copies of "normal" suspend pages (ie. "normal" pages that were saveable during the suspend) and it is used in the same way as previously (ie. by the architecture-dependent parts of swsusp). The other list of PBEs is for the copies of highmem suspend pages. The pages in this list are restored (in a reversible way) right before the arch-dependent code is called. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 11:34:18 +07:00
/*
mm: vmscan: flatten kswapd priority loop kswapd stops raising the scanning priority when at least SWAP_CLUSTER_MAX pages have been reclaimed or the pgdat is considered balanced. It then rechecks if it needs to restart at DEF_PRIORITY and whether high-order reclaim needs to be reset. This is not wrong per-se but it is confusing to follow and forcing kswapd to stay at DEF_PRIORITY may require several restarts before it has scanned enough pages to meet the high watermark even at 100% efficiency. This patch irons out the logic a bit by controlling when priority is raised and removing the "goto loop_again". This patch has kswapd raise the scanning priority until it is scanning enough pages that it could meet the high watermark in one shrink of the LRU lists if it is able to reclaim at 100% efficiency. It will not raise the scanning prioirty higher unless it is failing to reclaim any pages. To avoid infinite looping for high-order allocation requests kswapd will not reclaim for high-order allocations when it has reclaimed at least twice the number of pages as the allocation request. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:45 +07:00
* Raise priority if scanning rate is too low or there was no
* progress in reclaiming pages
*/
mm: vmscan: flatten kswapd priority loop kswapd stops raising the scanning priority when at least SWAP_CLUSTER_MAX pages have been reclaimed or the pgdat is considered balanced. It then rechecks if it needs to restart at DEF_PRIORITY and whether high-order reclaim needs to be reset. This is not wrong per-se but it is confusing to follow and forcing kswapd to stay at DEF_PRIORITY may require several restarts before it has scanned enough pages to meet the high watermark even at 100% efficiency. This patch irons out the logic a bit by controlling when priority is raised and removing the "goto loop_again". This patch has kswapd raise the scanning priority until it is scanning enough pages that it could meet the high watermark in one shrink of the LRU lists if it is able to reclaim at 100% efficiency. It will not raise the scanning prioirty higher unless it is failing to reclaim any pages. To avoid infinite looping for high-order allocation requests kswapd will not reclaim for high-order allocations when it has reclaimed at least twice the number of pages as the allocation request. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:45 +07:00
if (raise_priority || !sc.nr_reclaimed)
sc.priority--;
} while (sc.priority >= 1);
mm: vmscan: flatten kswapd priority loop kswapd stops raising the scanning priority when at least SWAP_CLUSTER_MAX pages have been reclaimed or the pgdat is considered balanced. It then rechecks if it needs to restart at DEF_PRIORITY and whether high-order reclaim needs to be reset. This is not wrong per-se but it is confusing to follow and forcing kswapd to stay at DEF_PRIORITY may require several restarts before it has scanned enough pages to meet the high watermark even at 100% efficiency. This patch irons out the logic a bit by controlling when priority is raised and removing the "goto loop_again". This patch has kswapd raise the scanning priority until it is scanning enough pages that it could meet the high watermark in one shrink of the LRU lists if it is able to reclaim at 100% efficiency. It will not raise the scanning prioirty higher unless it is failing to reclaim any pages. To avoid infinite looping for high-order allocation requests kswapd will not reclaim for high-order allocations when it has reclaimed at least twice the number of pages as the allocation request. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 05:01:45 +07:00
out:
/*
* Return the order kswapd stopped reclaiming at as
* prepare_kswapd_sleep() takes it into account. If another caller
* entered the allocator slow path while kswapd was awake, order will
* remain at the higher level.
*/
return sc.order;
}
static void kswapd_try_to_sleep(pg_data_t *pgdat, int alloc_order, int reclaim_order,
unsigned int classzone_idx)
{
long remaining = 0;
DEFINE_WAIT(wait);
if (freezing(current) || kthread_should_stop())
return;
prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
/* Try to sleep for a short interval */
if (prepare_kswapd_sleep(pgdat, reclaim_order, classzone_idx)) {
mm: wake kcompactd before kswapd's short sleep When kswapd goes to sleep it checks if the node is balanced and at first it sleeps only for HZ/10 time, then rechecks if the node is still balanced and nobody has woken it during the initial sleep. Only then it goes fully sleep until an allocation slowpath wakes it up again. For higher-order allocations, waking up kcompactd is done only before the full sleep. This turns out to be an issue in case another high-order allocation fails during the initial sleep. It will wake kswapd up, however kswapd considers the zone balanced from the order-0 perspective, and will just quickly try to sleep again. So if there's a longer stream of high-order allocations hitting the slowpath and waking up kswapd, it might never actually wake up kcompactd, which may be considered a regression from kswapd-based compaction. In the worst case, it might be that a single allocation that cannot direct reclaim/compact itself is waking kswapd in the retry loop and preventing kcompactd from being woken up and unblocking it. This patch makes sure kcompactd is woken up in such situations by simply moving the wakeup before the short initial sleep. More efficient solution would be to wake kcompactd immediately instead of kswapd if the node is already order-0 balanced, but in that case we should also move reset_isolation_suitable() call to kcompactd so it's not adding to the allocator's latency. Since it's late in the 4.6 cycle, let's go with the simpler change for now. Fixes: accf62422b3a ("mm, kswapd: replace kswapd compaction with waking up kcompactd") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-29 06:18:49 +07:00
/*
* Compaction records what page blocks it recently failed to
* isolate pages from and skips them in the future scanning.
* When kswapd is going to sleep, it is reasonable to assume
* that pages and compaction may succeed so reset the cache.
*/
reset_isolation_suitable(pgdat);
/*
* We have freed the memory, now we should compact it to make
* allocation of the requested order possible.
*/
wakeup_kcompactd(pgdat, alloc_order, classzone_idx);
mm: wake kcompactd before kswapd's short sleep When kswapd goes to sleep it checks if the node is balanced and at first it sleeps only for HZ/10 time, then rechecks if the node is still balanced and nobody has woken it during the initial sleep. Only then it goes fully sleep until an allocation slowpath wakes it up again. For higher-order allocations, waking up kcompactd is done only before the full sleep. This turns out to be an issue in case another high-order allocation fails during the initial sleep. It will wake kswapd up, however kswapd considers the zone balanced from the order-0 perspective, and will just quickly try to sleep again. So if there's a longer stream of high-order allocations hitting the slowpath and waking up kswapd, it might never actually wake up kcompactd, which may be considered a regression from kswapd-based compaction. In the worst case, it might be that a single allocation that cannot direct reclaim/compact itself is waking kswapd in the retry loop and preventing kcompactd from being woken up and unblocking it. This patch makes sure kcompactd is woken up in such situations by simply moving the wakeup before the short initial sleep. More efficient solution would be to wake kcompactd immediately instead of kswapd if the node is already order-0 balanced, but in that case we should also move reset_isolation_suitable() call to kcompactd so it's not adding to the allocator's latency. Since it's late in the 4.6 cycle, let's go with the simpler change for now. Fixes: accf62422b3a ("mm, kswapd: replace kswapd compaction with waking up kcompactd") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-29 06:18:49 +07:00
remaining = schedule_timeout(HZ/10);
/*
* If woken prematurely then reset kswapd_classzone_idx and
* order. The values will either be from a wakeup request or
* the previous request that slept prematurely.
*/
if (remaining) {
pgdat->kswapd_classzone_idx = max(pgdat->kswapd_classzone_idx, classzone_idx);
pgdat->kswapd_order = max(pgdat->kswapd_order, reclaim_order);
}
finish_wait(&pgdat->kswapd_wait, &wait);
prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
}
/*
* After a short sleep, check if it was a premature sleep. If not, then
* go fully to sleep until explicitly woken up.
*/
if (!remaining &&
prepare_kswapd_sleep(pgdat, reclaim_order, classzone_idx)) {
trace_mm_vmscan_kswapd_sleep(pgdat->node_id);
/*
* vmstat counters are not perfectly accurate and the estimated
* value for counters such as NR_FREE_PAGES can deviate from the
* true value by nr_online_cpus * threshold. To avoid the zone
* watermarks being breached while under pressure, we reduce the
* per-cpu vmstat threshold while kswapd is awake and restore
* them before going back to sleep.
*/
set_pgdat_percpu_threshold(pgdat, calculate_normal_threshold);
if (!kthread_should_stop())
schedule();
set_pgdat_percpu_threshold(pgdat, calculate_pressure_threshold);
} else {
if (remaining)
count_vm_event(KSWAPD_LOW_WMARK_HIT_QUICKLY);
else
count_vm_event(KSWAPD_HIGH_WMARK_HIT_QUICKLY);
}
finish_wait(&pgdat->kswapd_wait, &wait);
}
/*
* The background pageout daemon, started as a kernel thread
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:32 +07:00
* from the init process.
*
* This basically trickles out pages so that we have _some_
* free memory available even if there is no other activity
* that frees anything up. This is needed for things like routing
* etc, where we otherwise might have all activity going on in
* asynchronous contexts that cannot page things out.
*
* If there are applications that are active memory-allocators
* (most normal use), this basically shouldn't matter.
*/
static int kswapd(void *p)
{
unsigned int alloc_order, reclaim_order, classzone_idx;
pg_data_t *pgdat = (pg_data_t*)p;
struct task_struct *tsk = current;
struct reclaim_state reclaim_state = {
.reclaimed_slab = 0,
};
const struct cpumask *cpumask = cpumask_of_node(pgdat->node_id);
lockdep: annotate reclaim context (__GFP_NOFS) Here is another version, with the incremental patch rolled up, and added reclaim context annotation to kswapd, and allocation tracing to slab allocators (which may only ever reach the page allocator in rare cases, so it is good to put annotations here too). Haven't tested this version as such, but it should be getting closer to merge worthy ;) -- After noticing some code in mm/filemap.c accidentally perform a __GFP_FS allocation when it should not have been, I thought it might be a good idea to try to catch this kind of thing with lockdep. I coded up a little idea that seems to work. Unfortunately the system has to actually be in __GFP_FS page reclaim, then take the lock, before it will mark it. But at least that might still be some orders of magnitude more common (and more debuggable) than an actual deadlock condition, so we have some improvement I hope (the concept is no less complete than discovery of a lock's interrupt contexts). I guess we could even do the same thing with __GFP_IO (normal reclaim), and even GFP_NOIO locks too... but filesystems will have the most locks and fiddly code paths, so let's start there and see how it goes. It *seems* to work. I did a quick test. ================================= [ INFO: inconsistent lock state ] 2.6.28-rc6-00007-ged31348-dirty #26 --------------------------------- inconsistent {in-reclaim-W} -> {ov-reclaim-W} usage. modprobe/8526 [HC0[0]:SC0[0]:HE1:SE1] takes: (testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd] {in-reclaim-W} state was registered at: [<ffffffff80267bdb>] __lock_acquire+0x75b/0x1a60 [<ffffffff80268f71>] lock_acquire+0x91/0xc0 [<ffffffff8070f0e1>] mutex_lock_nested+0xb1/0x310 [<ffffffffa002002b>] brd_init+0x2b/0x216 [brd] [<ffffffff8020903b>] _stext+0x3b/0x170 [<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0 [<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff irq event stamp: 3929 hardirqs last enabled at (3929): [<ffffffff8070f2b5>] mutex_lock_nested+0x285/0x310 hardirqs last disabled at (3928): [<ffffffff8070f089>] mutex_lock_nested+0x59/0x310 softirqs last enabled at (3732): [<ffffffff8061f623>] sk_filter+0x83/0xe0 softirqs last disabled at (3730): [<ffffffff8061f5b6>] sk_filter+0x16/0xe0 other info that might help us debug this: 1 lock held by modprobe/8526: #0: (testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd] stack backtrace: Pid: 8526, comm: modprobe Not tainted 2.6.28-rc6-00007-ged31348-dirty #26 Call Trace: [<ffffffff80265483>] print_usage_bug+0x193/0x1d0 [<ffffffff80266530>] mark_lock+0xaf0/0xca0 [<ffffffff80266735>] mark_held_locks+0x55/0xc0 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd] [<ffffffff802667ca>] trace_reclaim_fs+0x2a/0x60 [<ffffffff80285005>] __alloc_pages_internal+0x475/0x580 [<ffffffff8070f29e>] ? mutex_lock_nested+0x26e/0x310 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd] [<ffffffffa002006a>] brd_init+0x6a/0x216 [brd] [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd] [<ffffffff8020903b>] _stext+0x3b/0x170 [<ffffffff8070f8b9>] ? mutex_unlock+0x9/0x10 [<ffffffff8070f83d>] ? __mutex_unlock_slowpath+0x10d/0x180 [<ffffffff802669ec>] ? trace_hardirqs_on_caller+0x12c/0x190 [<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0 [<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 14:12:39 +07:00
lockdep_set_current_reclaim_state(GFP_KERNEL);
if (!cpumask_empty(cpumask))
set_cpus_allowed_ptr(tsk, cpumask);
current->reclaim_state = &reclaim_state;
/*
* Tell the memory management that we're a "memory allocator",
* and that if we need more memory we should get access to it
* regardless (see "__alloc_pages()"). "kswapd" should
* never get caught in the normal page freeing logic.
*
* (Kswapd normally doesn't need memory anyway, but sometimes
* you need a small amount of memory in order to be able to
* page out something else, and this flag essentially protects
* us from recursively trying to free more memory as we're
* trying to free the first piece of memory in the first place).
*/
tsk->flags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD;
set_freezable();
pgdat->kswapd_order = alloc_order = reclaim_order = 0;
pgdat->kswapd_classzone_idx = classzone_idx = 0;
for ( ; ; ) {
bool ret;
kswapd_try_sleep:
kswapd_try_to_sleep(pgdat, alloc_order, reclaim_order,
classzone_idx);
mm: vmscan: only read new_classzone_idx from pgdat when reclaiming successfully During allocator-intensive workloads, kswapd will be woken frequently causing free memory to oscillate between the high and min watermark. This is expected behaviour. Unfortunately, if the highest zone is small, a problem occurs. When balance_pgdat() returns, it may be at a lower classzone_idx than it started because the highest zone was unreclaimable. Before checking if it should go to sleep though, it checks pgdat->classzone_idx which when there is no other activity will be MAX_NR_ZONES-1. It interprets this as it has been woken up while reclaiming, skips scheduling and reclaims again. As there is no useful reclaim work to do, it enters into a loop of shrinking slab consuming loads of CPU until the highest zone becomes reclaimable for a long period of time. There are two problems here. 1) If the returned classzone or order is lower, it'll continue reclaiming without scheduling. 2) if the highest zone was marked unreclaimable but balance_pgdat() returns immediately at DEF_PRIORITY, the new lower classzone is not communicated back to kswapd() for sleeping. This patch does two things that are related. If the end_zone is unreclaimable, this information is communicated back. Second, if the classzone or order was reduced due to failing to reclaim, new information is not read from pgdat and instead an attempt is made to go to sleep. Due to this, it is also necessary that pgdat->classzone_idx be initialised each time to pgdat->nr_zones - 1 to avoid re-reads being interpreted as wakeups. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Pádraig Brady <P@draigBrady.com> Tested-by: Pádraig Brady <P@draigBrady.com> Tested-by: Andrew Lutomirski <luto@mit.edu> Acked-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-09 05:39:40 +07:00
/* Read the new order and classzone_idx */
alloc_order = reclaim_order = pgdat->kswapd_order;
classzone_idx = pgdat->kswapd_classzone_idx;
pgdat->kswapd_order = 0;
pgdat->kswapd_classzone_idx = 0;
ret = try_to_freeze();
if (kthread_should_stop())
break;
/*
* We can speed up thawing tasks if we don't call balance_pgdat
* after returning from the refrigerator
*/
if (ret)
continue;
/*
* Reclaim begins at the requested order but if a high-order
* reclaim fails then kswapd falls back to reclaiming for
* order-0. If that happens, kswapd will consider sleeping
* for the order it finished reclaiming at (reclaim_order)
* but kcompactd is woken to compact for the original
* request (alloc_order).
*/
trace_mm_vmscan_kswapd_wake(pgdat->node_id, classzone_idx,
alloc_order);
reclaim_order = balance_pgdat(pgdat, alloc_order, classzone_idx);
if (reclaim_order < alloc_order)
goto kswapd_try_sleep;
alloc_order = reclaim_order = pgdat->kswapd_order;
classzone_idx = pgdat->kswapd_classzone_idx;
}
mm: vmscan: clear kswapd's special reclaim powers before exiting When kswapd exits, it can end up taking locks that were previously held by allocating tasks while they waited for reclaim. Lockdep currently warns about this: On Wed, May 28, 2014 at 06:06:34PM +0800, Gu Zheng wrote: > inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-R} usage. > kswapd2/1151 [HC0[0]:SC0[0]:HE1:SE1] takes: > (&sig->group_rwsem){+++++?}, at: exit_signals+0x24/0x130 > {RECLAIM_FS-ON-W} state was registered at: > mark_held_locks+0xb9/0x140 > lockdep_trace_alloc+0x7a/0xe0 > kmem_cache_alloc_trace+0x37/0x240 > flex_array_alloc+0x99/0x1a0 > cgroup_attach_task+0x63/0x430 > attach_task_by_pid+0x210/0x280 > cgroup_procs_write+0x16/0x20 > cgroup_file_write+0x120/0x2c0 > vfs_write+0xc0/0x1f0 > SyS_write+0x4c/0xa0 > tracesys+0xdd/0xe2 > irq event stamp: 49 > hardirqs last enabled at (49): _raw_spin_unlock_irqrestore+0x36/0x70 > hardirqs last disabled at (48): _raw_spin_lock_irqsave+0x2b/0xa0 > softirqs last enabled at (0): copy_process.part.24+0x627/0x15f0 > softirqs last disabled at (0): (null) > > other info that might help us debug this: > Possible unsafe locking scenario: > > CPU0 > ---- > lock(&sig->group_rwsem); > <Interrupt> > lock(&sig->group_rwsem); > > *** DEADLOCK *** > > no locks held by kswapd2/1151. > > stack backtrace: > CPU: 30 PID: 1151 Comm: kswapd2 Not tainted 3.10.39+ #4 > Call Trace: > dump_stack+0x19/0x1b > print_usage_bug+0x1f7/0x208 > mark_lock+0x21d/0x2a0 > __lock_acquire+0x52a/0xb60 > lock_acquire+0xa2/0x140 > down_read+0x51/0xa0 > exit_signals+0x24/0x130 > do_exit+0xb5/0xa50 > kthread+0xdb/0x100 > ret_from_fork+0x7c/0xb0 This is because the kswapd thread is still marked as a reclaimer at the time of exit. But because it is exiting, nobody is actually waiting on it to make reclaim progress anymore, and it's nothing but a regular thread at this point. Be tidy and strip it of all its powers (PF_MEMALLOC, PF_SWAPWRITE, PF_KSWAPD, and the lockdep reclaim state) before returning from the thread function. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 04:35:35 +07:00
tsk->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD);
current->reclaim_state = NULL;
mm: vmscan: clear kswapd's special reclaim powers before exiting When kswapd exits, it can end up taking locks that were previously held by allocating tasks while they waited for reclaim. Lockdep currently warns about this: On Wed, May 28, 2014 at 06:06:34PM +0800, Gu Zheng wrote: > inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-R} usage. > kswapd2/1151 [HC0[0]:SC0[0]:HE1:SE1] takes: > (&sig->group_rwsem){+++++?}, at: exit_signals+0x24/0x130 > {RECLAIM_FS-ON-W} state was registered at: > mark_held_locks+0xb9/0x140 > lockdep_trace_alloc+0x7a/0xe0 > kmem_cache_alloc_trace+0x37/0x240 > flex_array_alloc+0x99/0x1a0 > cgroup_attach_task+0x63/0x430 > attach_task_by_pid+0x210/0x280 > cgroup_procs_write+0x16/0x20 > cgroup_file_write+0x120/0x2c0 > vfs_write+0xc0/0x1f0 > SyS_write+0x4c/0xa0 > tracesys+0xdd/0xe2 > irq event stamp: 49 > hardirqs last enabled at (49): _raw_spin_unlock_irqrestore+0x36/0x70 > hardirqs last disabled at (48): _raw_spin_lock_irqsave+0x2b/0xa0 > softirqs last enabled at (0): copy_process.part.24+0x627/0x15f0 > softirqs last disabled at (0): (null) > > other info that might help us debug this: > Possible unsafe locking scenario: > > CPU0 > ---- > lock(&sig->group_rwsem); > <Interrupt> > lock(&sig->group_rwsem); > > *** DEADLOCK *** > > no locks held by kswapd2/1151. > > stack backtrace: > CPU: 30 PID: 1151 Comm: kswapd2 Not tainted 3.10.39+ #4 > Call Trace: > dump_stack+0x19/0x1b > print_usage_bug+0x1f7/0x208 > mark_lock+0x21d/0x2a0 > __lock_acquire+0x52a/0xb60 > lock_acquire+0xa2/0x140 > down_read+0x51/0xa0 > exit_signals+0x24/0x130 > do_exit+0xb5/0xa50 > kthread+0xdb/0x100 > ret_from_fork+0x7c/0xb0 This is because the kswapd thread is still marked as a reclaimer at the time of exit. But because it is exiting, nobody is actually waiting on it to make reclaim progress anymore, and it's nothing but a regular thread at this point. Be tidy and strip it of all its powers (PF_MEMALLOC, PF_SWAPWRITE, PF_KSWAPD, and the lockdep reclaim state) before returning from the thread function. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 04:35:35 +07:00
lockdep_clear_current_reclaim_state();
return 0;
}
/*
* A zone is low on free memory, so wake its kswapd task to service it.
*/
mm: kswapd: stop high-order balancing when any suitable zone is balanced Simon Kirby reported the following problem We're seeing cases on a number of servers where cache never fully grows to use all available memory. Sometimes we see servers with 4 GB of memory that never seem to have less than 1.5 GB free, even with a constantly-active VM. In some cases, these servers also swap out while this happens, even though they are constantly reading the working set into memory. We have been seeing this happening for a long time; I don't think it's anything recent, and it still happens on 2.6.36. After some debugging work by Simon, Dave Hansen and others, the prevaling theory became that kswapd is reclaiming order-3 pages requested by SLUB too aggressive about it. There are two apparent problems here. On the target machine, there is a small Normal zone in comparison to DMA32. As kswapd tries to balance all zones, it would continually try reclaiming for Normal even though DMA32 was balanced enough for callers. The second problem is that sleeping_prematurely() does not use the same logic as balance_pgdat() when deciding whether to sleep or not. This keeps kswapd artifically awake. A number of tests were run and the figures from previous postings will look very different for a few reasons. One, the old figures were forcing my network card to use GFP_ATOMIC in attempt to replicate Simon's problem. Second, I previous specified slub_min_order=3 again in an attempt to reproduce Simon's problem. In this posting, I'm depending on Simon to say whether his problem is fixed or not and these figures are to show the impact to the ordinary cases. Finally, the "vmscan" figures are taken from /proc/vmstat instead of the tracepoints. There is less information but recording is less disruptive. The first test of relevance was postmark with a process running in the background reading a large amount of anonymous memory in blocks. The objective was to vaguely simulate what was happening on Simon's machine and it's memory intensive enough to have kswapd awake. POSTMARK traceonly kanyzone Transactions per second: 156.00 ( 0.00%) 153.00 (-1.96%) Data megabytes read per second: 21.51 ( 0.00%) 21.52 ( 0.05%) Data megabytes written per second: 29.28 ( 0.00%) 29.11 (-0.58%) Files created alone per second: 250.00 ( 0.00%) 416.00 (39.90%) Files create/transact per second: 79.00 ( 0.00%) 76.00 (-3.95%) Files deleted alone per second: 520.00 ( 0.00%) 420.00 (-23.81%) Files delete/transact per second: 79.00 ( 0.00%) 76.00 (-3.95%) MMTests Statistics: duration User/Sys Time Running Test (seconds) 16.58 17.4 Total Elapsed Time (seconds) 218.48 222.47 VMstat Reclaim Statistics: vmscan Direct reclaims 0 4 Direct reclaim pages scanned 0 203 Direct reclaim pages reclaimed 0 184 Kswapd pages scanned 326631 322018 Kswapd pages reclaimed 312632 309784 Kswapd low wmark quickly 1 4 Kswapd high wmark quickly 122 475 Kswapd skip congestion_wait 1 0 Pages activated 700040 705317 Pages deactivated 212113 203922 Pages written 9875 6363 Total pages scanned 326631 322221 Total pages reclaimed 312632 309968 %age total pages scanned/reclaimed 95.71% 96.20% %age total pages scanned/written 3.02% 1.97% proc vmstat: Faults Major Faults 300 254 Minor Faults 645183 660284 Page ins 493588 486704 Page outs 4960088 4986704 Swap ins 1230 661 Swap outs 9869 6355 Performance is mildly affected because kswapd is no longer doing as much work and the background memory consumer process is getting in the way. Note that kswapd scanned and reclaimed fewer pages as it's less aggressive and overall fewer pages were scanned and reclaimed. Swap in/out is particularly reduced again reflecting kswapd throwing out fewer pages. The slight performance impact is unfortunate here but it looks like a direct result of kswapd being less aggressive. As the bug report is about too many pages being freed by kswapd, it may have to be accepted for now. The second test is a streaming IO benchmark that was previously used by Johannes to show regressions in page reclaim. MICRO traceonly kanyzone User/Sys Time Running Test (seconds) 29.29 28.87 Total Elapsed Time (seconds) 492.18 488.79 VMstat Reclaim Statistics: vmscan Direct reclaims 2128 1460 Direct reclaim pages scanned 2284822 1496067 Direct reclaim pages reclaimed 148919 110937 Kswapd pages scanned 15450014 16202876 Kswapd pages reclaimed 8503697 8537897 Kswapd low wmark quickly 3100 3397 Kswapd high wmark quickly 1860 7243 Kswapd skip congestion_wait 708 801 Pages activated 9635 9573 Pages deactivated 1432 1271 Pages written 223 1130 Total pages scanned 17734836 17698943 Total pages reclaimed 8652616 8648834 %age total pages scanned/reclaimed 48.79% 48.87% %age total pages scanned/written 0.00% 0.01% proc vmstat: Faults Major Faults 165 221 Minor Faults 9655785 9656506 Page ins 3880 7228 Page outs 37692940 37480076 Swap ins 0 69 Swap outs 19 15 Again fewer pages are scanned and reclaimed as expected and this time the test completed faster. Note that kswapd is hitting its watermarks faster (low and high wmark quickly) which I expect is due to kswapd reclaiming fewer pages. I also ran fs-mark, iozone and sysbench but there is nothing interesting to report in the figures. Performance is not significantly changed and the reclaim statistics look reasonable. Tgis patch: When the allocator enters its slow path, kswapd is woken up to balance the node. It continues working until all zones within the node are balanced. For order-0 allocations, this makes perfect sense but for higher orders it can have unintended side-effects. If the zone sizes are imbalanced, kswapd may reclaim heavily within a smaller zone discarding an excessive number of pages. The user-visible behaviour is that kswapd is awake and reclaiming even though plenty of pages are free from a suitable zone. This patch alters the "balance" logic for high-order reclaim allowing kswapd to stop if any suitable zone becomes balanced to reduce the number of pages it reclaims from other zones. kswapd still tries to ensure that order-0 watermarks for all zones are met before sleeping. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Eric B Munson <emunson@mgebm.net> Cc: Simon Kirby <sim@hostway.ca> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 06:46:20 +07:00
void wakeup_kswapd(struct zone *zone, int order, enum zone_type classzone_idx)
{
pg_data_t *pgdat;
int z;
if (!populated_zone(zone))
return;
if (!cpuset_zone_allowed(zone, GFP_KERNEL | __GFP_HARDWALL))
return;
mm: page allocator: adjust the per-cpu counter threshold when memory is low Commit aa45484 ("calculate a better estimate of NR_FREE_PAGES when memory is low") noted that watermarks were based on the vmstat NR_FREE_PAGES. To avoid synchronization overhead, these counters are maintained on a per-cpu basis and drained both periodically and when a threshold is above a threshold. On large CPU systems, the difference between the estimate and real value of NR_FREE_PAGES can be very high. The system can get into a case where pages are allocated far below the min watermark potentially causing livelock issues. The commit solved the problem by taking a better reading of NR_FREE_PAGES when memory was low. Unfortately, as reported by Shaohua Li this accurate reading can consume a large amount of CPU time on systems with many sockets due to cache line bouncing. This patch takes a different approach. For large machines where counter drift might be unsafe and while kswapd is awake, the per-cpu thresholds for the target pgdat are reduced to limit the level of drift to what should be a safe level. This incurs a performance penalty in heavy memory pressure by a factor that depends on the workload and the machine but the machine should function correctly without accidentally exhausting all memory on a node. There is an additional cost when kswapd wakes and sleeps but the event is not expected to be frequent - in Shaohua's test case, there was one recorded sleep and wake event at least. To ensure that kswapd wakes up, a safe version of zone_watermark_ok() is introduced that takes a more accurate reading of NR_FREE_PAGES when called from wakeup_kswapd, when deciding whether it is really safe to go back to sleep in sleeping_prematurely() and when deciding if a zone is really balanced or not in balance_pgdat(). We are still using an expensive function but limiting how often it is called. When the test case is reproduced, the time spent in the watermark functions is reduced. The following report is on the percentage of time spent cumulatively spent in the functions zone_nr_free_pages(), zone_watermark_ok(), __zone_watermark_ok(), zone_watermark_ok_safe(), zone_page_state_snapshot(), zone_page_state(). vanilla 11.6615% disable-threshold 0.2584% David said: : We had to pull aa454840 "mm: page allocator: calculate a better estimate : of NR_FREE_PAGES when memory is low and kswapd is awake" from 2.6.36 : internally because tests showed that it would cause the machine to stall : as the result of heavy kswapd activity. I merged it back with this fix as : it is pending in the -mm tree and it solves the issue we were seeing, so I : definitely think this should be pushed to -stable (and I would seriously : consider it for 2.6.37 inclusion even at this late date). Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reported-by: Shaohua Li <shaohua.li@intel.com> Reviewed-by: Christoph Lameter <cl@linux.com> Tested-by: Nicolas Bareil <nico@chdir.org> Cc: David Rientjes <rientjes@google.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: <stable@kernel.org> [2.6.37.1, 2.6.36.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 06:45:41 +07:00
pgdat = zone->zone_pgdat;
pgdat->kswapd_classzone_idx = max(pgdat->kswapd_classzone_idx, classzone_idx);
pgdat->kswapd_order = max(pgdat->kswapd_order, order);
if (!waitqueue_active(&pgdat->kswapd_wait))
return;
/* Only wake kswapd if all zones are unbalanced */
for (z = 0; z <= classzone_idx; z++) {
zone = pgdat->node_zones + z;
if (!populated_zone(zone))
continue;
if (zone_balanced(zone, order, classzone_idx))
return;
}
mm: page allocator: adjust the per-cpu counter threshold when memory is low Commit aa45484 ("calculate a better estimate of NR_FREE_PAGES when memory is low") noted that watermarks were based on the vmstat NR_FREE_PAGES. To avoid synchronization overhead, these counters are maintained on a per-cpu basis and drained both periodically and when a threshold is above a threshold. On large CPU systems, the difference between the estimate and real value of NR_FREE_PAGES can be very high. The system can get into a case where pages are allocated far below the min watermark potentially causing livelock issues. The commit solved the problem by taking a better reading of NR_FREE_PAGES when memory was low. Unfortately, as reported by Shaohua Li this accurate reading can consume a large amount of CPU time on systems with many sockets due to cache line bouncing. This patch takes a different approach. For large machines where counter drift might be unsafe and while kswapd is awake, the per-cpu thresholds for the target pgdat are reduced to limit the level of drift to what should be a safe level. This incurs a performance penalty in heavy memory pressure by a factor that depends on the workload and the machine but the machine should function correctly without accidentally exhausting all memory on a node. There is an additional cost when kswapd wakes and sleeps but the event is not expected to be frequent - in Shaohua's test case, there was one recorded sleep and wake event at least. To ensure that kswapd wakes up, a safe version of zone_watermark_ok() is introduced that takes a more accurate reading of NR_FREE_PAGES when called from wakeup_kswapd, when deciding whether it is really safe to go back to sleep in sleeping_prematurely() and when deciding if a zone is really balanced or not in balance_pgdat(). We are still using an expensive function but limiting how often it is called. When the test case is reproduced, the time spent in the watermark functions is reduced. The following report is on the percentage of time spent cumulatively spent in the functions zone_nr_free_pages(), zone_watermark_ok(), __zone_watermark_ok(), zone_watermark_ok_safe(), zone_page_state_snapshot(), zone_page_state(). vanilla 11.6615% disable-threshold 0.2584% David said: : We had to pull aa454840 "mm: page allocator: calculate a better estimate : of NR_FREE_PAGES when memory is low and kswapd is awake" from 2.6.36 : internally because tests showed that it would cause the machine to stall : as the result of heavy kswapd activity. I merged it back with this fix as : it is pending in the -mm tree and it solves the issue we were seeing, so I : definitely think this should be pushed to -stable (and I would seriously : consider it for 2.6.37 inclusion even at this late date). Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reported-by: Shaohua Li <shaohua.li@intel.com> Reviewed-by: Christoph Lameter <cl@linux.com> Tested-by: Nicolas Bareil <nico@chdir.org> Cc: David Rientjes <rientjes@google.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: <stable@kernel.org> [2.6.37.1, 2.6.36.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 06:45:41 +07:00
trace_mm_vmscan_wakeup_kswapd(pgdat->node_id, zone_idx(zone), order);
wake_up_interruptible(&pgdat->kswapd_wait);
}
#ifdef CONFIG_HIBERNATION
/*
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:59:12 +07:00
* Try to free `nr_to_reclaim' of memory, system-wide, and return the number of
* freed pages.
*
* Rather than trying to age LRUs the aim is to preserve the overall
* LRU order by reclaiming preferentially
* inactive > active > active referenced > active mapped
*/
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:59:12 +07:00
unsigned long shrink_all_memory(unsigned long nr_to_reclaim)
{
struct reclaim_state reclaim_state;
struct scan_control sc = {
.nr_to_reclaim = nr_to_reclaim,
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:59:12 +07:00
.gfp_mask = GFP_HIGHUSER_MOVABLE,
.reclaim_idx = MAX_NR_ZONES - 1,
.priority = DEF_PRIORITY,
.may_writepage = 1,
.may_unmap = 1,
.may_swap = 1,
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:59:12 +07:00
.hibernation_mode = 1,
};
struct zonelist *zonelist = node_zonelist(numa_node_id(), sc.gfp_mask);
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:59:12 +07:00
struct task_struct *p = current;
unsigned long nr_reclaimed;
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:59:12 +07:00
p->flags |= PF_MEMALLOC;
lockdep_set_current_reclaim_state(sc.gfp_mask);
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
nr_reclaimed = do_try_to_free_pages(zonelist, &sc);
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:59:12 +07:00
p->reclaim_state = NULL;
lockdep_clear_current_reclaim_state();
p->flags &= ~PF_MEMALLOC;
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:59:12 +07:00
return nr_reclaimed;
}
#endif /* CONFIG_HIBERNATION */
/* It's optimal to keep kswapds on the same CPUs as their memory, but
not required for correctness. So if the last cpu in a node goes
away, we get changed to run anywhere: as the first one comes back,
restore their cpu bindings. */
static int cpu_callback(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
int nid;
if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN) {
for_each_node_state(nid, N_MEMORY) {
pg_data_t *pgdat = NODE_DATA(nid);
const struct cpumask *mask;
mask = cpumask_of_node(pgdat->node_id);
if (cpumask_any_and(cpu_online_mask, mask) < nr_cpu_ids)
/* One of our CPUs online: restore mask */
set_cpus_allowed_ptr(pgdat->kswapd, mask);
}
}
return NOTIFY_OK;
}
/*
* This kswapd start function will be called by init and node-hot-add.
* On node-hot-add, kswapd will moved to proper cpus if cpus are hot-added.
*/
int kswapd_run(int nid)
{
pg_data_t *pgdat = NODE_DATA(nid);
int ret = 0;
if (pgdat->kswapd)
return 0;
pgdat->kswapd = kthread_run(kswapd, pgdat, "kswapd%d", nid);
if (IS_ERR(pgdat->kswapd)) {
/* failure at boot is fatal */
BUG_ON(system_state == SYSTEM_BOOTING);
pr_err("Failed to start kswapd on node %d\n", nid);
ret = PTR_ERR(pgdat->kswapd);
pgdat->kswapd = NULL;
}
return ret;
}
/*
memory hotplug: fix invalid memory access caused by stale kswapd pointer kswapd_stop() is called to destroy the kswapd work thread when all memory of a NUMA node has been offlined. But kswapd_stop() only terminates the work thread without resetting NODE_DATA(nid)->kswapd to NULL. The stale pointer will prevent kswapd_run() from creating a new work thread when adding memory to the memory-less NUMA node again. Eventually the stale pointer may cause invalid memory access. An example stack dump as below. It's reproduced with 2.6.32, but latest kernel has the same issue. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81051a94>] exit_creds+0x12/0x78 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/memory/memory391/state CPU 11 Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq microcode fuse loop dm_mod tpm_tis rtc_cmos i2c_i801 rtc_core tpm serio_raw pcspkr sg tpm_bios igb i2c_core iTCO_wdt rtc_lib mptctl iTCO_vendor_support button dca bnx2 usbhid hid uhci_hcd ehci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic ide_core ata_generic ata_piix libata thermal processor thermal_sys hwmon mptsas mptscsih mptbase scsi_transport_sas scsi_mod Pid: 7949, comm: sh Not tainted 2.6.32.12-qiuxishi-5-default #92 Tecal RH2285 RIP: 0010:exit_creds+0x12/0x78 RSP: 0018:ffff8806044f1d78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff880604f22140 RCX: 0000000000019502 RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000 RBP: ffff880604f22150 R08: 0000000000000000 R09: ffffffff81a4dc10 R10: 00000000000032a0 R11: ffff880006202500 R12: 0000000000000000 R13: 0000000000c40000 R14: 0000000000008000 R15: 0000000000000001 FS: 00007fbc03d066f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000060f029000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sh (pid: 7949, threadinfo ffff8806044f0000, task ffff880603d7c600) Stack: ffff880604f22140 ffffffff8103aac5 ffff880604f22140 ffffffff8104d21e ffff880006202500 0000000000008000 0000000000c38000 ffffffff810bd5b1 0000000000000000 ffff880603d7c600 00000000ffffdd29 0000000000000003 Call Trace: __put_task_struct+0x5d/0x97 kthread_stop+0x50/0x58 offline_pages+0x324/0x3da memory_block_change_state+0x179/0x1db store_mem_state+0x9e/0xbb sysfs_write_file+0xd0/0x107 vfs_write+0xad/0x169 sys_write+0x45/0x6e system_call_fastpath+0x16/0x1b Code: ff 4d 00 0f 94 c0 84 c0 74 08 48 89 ef e8 1f fd ff ff 5b 5d 31 c0 41 5c c3 53 48 8b 87 20 06 00 00 48 89 fb 48 8b bf 18 06 00 00 <8b> 00 48 c7 83 18 06 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0 RIP exit_creds+0x12/0x78 RSP <ffff8806044f1d78> CR2: 0000000000000000 [akpm@linux-foundation.org: add pglist_data.kswapd locking comments] Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-12 04:01:52 +07:00
* Called by memory hotplug when all memory in a node is offlined. Caller must
mem-hotplug: implement get/put_online_mems kmem_cache_{create,destroy,shrink} need to get a stable value of cpu/node online mask, because they init/destroy/access per-cpu/node kmem_cache parts, which can be allocated or destroyed on cpu/mem hotplug. To protect against cpu hotplug, these functions use {get,put}_online_cpus. However, they do nothing to synchronize with memory hotplug - taking the slab_mutex does not eliminate the possibility of race as described in patch 2. What we need there is something like get_online_cpus, but for memory. We already have lock_memory_hotplug, which serves for the purpose, but it's a bit of a hammer right now, because it's backed by a mutex. As a result, it imposes some limitations to locking order, which are not desirable, and can't be used just like get_online_cpus. That's why in patch 1 I substitute it with get/put_online_mems, which work exactly like get/put_online_cpus except they block not cpu, but memory hotplug. [ v1 can be found at https://lkml.org/lkml/2014/4/6/68. I NAK'ed it by myself, because it used an rw semaphore for get/put_online_mems, making them dead lock prune. ] This patch (of 2): {un}lock_memory_hotplug, which is used to synchronize against memory hotplug, is currently backed by a mutex, which makes it a bit of a hammer - threads that only want to get a stable value of online nodes mask won't be able to proceed concurrently. Also, it imposes some strong locking ordering rules on it, which narrows down the set of its usage scenarios. This patch introduces get/put_online_mems, which are the same as get/put_online_cpus, but for memory hotplug, i.e. executing a code inside a get/put_online_mems section will guarantee a stable value of online nodes, present pages, etc. lock_memory_hotplug()/unlock_memory_hotplug() are removed altogether. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 06:07:18 +07:00
* hold mem_hotplug_begin/end().
*/
void kswapd_stop(int nid)
{
struct task_struct *kswapd = NODE_DATA(nid)->kswapd;
memory hotplug: fix invalid memory access caused by stale kswapd pointer kswapd_stop() is called to destroy the kswapd work thread when all memory of a NUMA node has been offlined. But kswapd_stop() only terminates the work thread without resetting NODE_DATA(nid)->kswapd to NULL. The stale pointer will prevent kswapd_run() from creating a new work thread when adding memory to the memory-less NUMA node again. Eventually the stale pointer may cause invalid memory access. An example stack dump as below. It's reproduced with 2.6.32, but latest kernel has the same issue. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81051a94>] exit_creds+0x12/0x78 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/memory/memory391/state CPU 11 Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq microcode fuse loop dm_mod tpm_tis rtc_cmos i2c_i801 rtc_core tpm serio_raw pcspkr sg tpm_bios igb i2c_core iTCO_wdt rtc_lib mptctl iTCO_vendor_support button dca bnx2 usbhid hid uhci_hcd ehci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic ide_core ata_generic ata_piix libata thermal processor thermal_sys hwmon mptsas mptscsih mptbase scsi_transport_sas scsi_mod Pid: 7949, comm: sh Not tainted 2.6.32.12-qiuxishi-5-default #92 Tecal RH2285 RIP: 0010:exit_creds+0x12/0x78 RSP: 0018:ffff8806044f1d78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff880604f22140 RCX: 0000000000019502 RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000 RBP: ffff880604f22150 R08: 0000000000000000 R09: ffffffff81a4dc10 R10: 00000000000032a0 R11: ffff880006202500 R12: 0000000000000000 R13: 0000000000c40000 R14: 0000000000008000 R15: 0000000000000001 FS: 00007fbc03d066f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000060f029000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sh (pid: 7949, threadinfo ffff8806044f0000, task ffff880603d7c600) Stack: ffff880604f22140 ffffffff8103aac5 ffff880604f22140 ffffffff8104d21e ffff880006202500 0000000000008000 0000000000c38000 ffffffff810bd5b1 0000000000000000 ffff880603d7c600 00000000ffffdd29 0000000000000003 Call Trace: __put_task_struct+0x5d/0x97 kthread_stop+0x50/0x58 offline_pages+0x324/0x3da memory_block_change_state+0x179/0x1db store_mem_state+0x9e/0xbb sysfs_write_file+0xd0/0x107 vfs_write+0xad/0x169 sys_write+0x45/0x6e system_call_fastpath+0x16/0x1b Code: ff 4d 00 0f 94 c0 84 c0 74 08 48 89 ef e8 1f fd ff ff 5b 5d 31 c0 41 5c c3 53 48 8b 87 20 06 00 00 48 89 fb 48 8b bf 18 06 00 00 <8b> 00 48 c7 83 18 06 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0 RIP exit_creds+0x12/0x78 RSP <ffff8806044f1d78> CR2: 0000000000000000 [akpm@linux-foundation.org: add pglist_data.kswapd locking comments] Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-12 04:01:52 +07:00
if (kswapd) {
kthread_stop(kswapd);
memory hotplug: fix invalid memory access caused by stale kswapd pointer kswapd_stop() is called to destroy the kswapd work thread when all memory of a NUMA node has been offlined. But kswapd_stop() only terminates the work thread without resetting NODE_DATA(nid)->kswapd to NULL. The stale pointer will prevent kswapd_run() from creating a new work thread when adding memory to the memory-less NUMA node again. Eventually the stale pointer may cause invalid memory access. An example stack dump as below. It's reproduced with 2.6.32, but latest kernel has the same issue. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81051a94>] exit_creds+0x12/0x78 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/memory/memory391/state CPU 11 Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq microcode fuse loop dm_mod tpm_tis rtc_cmos i2c_i801 rtc_core tpm serio_raw pcspkr sg tpm_bios igb i2c_core iTCO_wdt rtc_lib mptctl iTCO_vendor_support button dca bnx2 usbhid hid uhci_hcd ehci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic ide_core ata_generic ata_piix libata thermal processor thermal_sys hwmon mptsas mptscsih mptbase scsi_transport_sas scsi_mod Pid: 7949, comm: sh Not tainted 2.6.32.12-qiuxishi-5-default #92 Tecal RH2285 RIP: 0010:exit_creds+0x12/0x78 RSP: 0018:ffff8806044f1d78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff880604f22140 RCX: 0000000000019502 RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000 RBP: ffff880604f22150 R08: 0000000000000000 R09: ffffffff81a4dc10 R10: 00000000000032a0 R11: ffff880006202500 R12: 0000000000000000 R13: 0000000000c40000 R14: 0000000000008000 R15: 0000000000000001 FS: 00007fbc03d066f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000060f029000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sh (pid: 7949, threadinfo ffff8806044f0000, task ffff880603d7c600) Stack: ffff880604f22140 ffffffff8103aac5 ffff880604f22140 ffffffff8104d21e ffff880006202500 0000000000008000 0000000000c38000 ffffffff810bd5b1 0000000000000000 ffff880603d7c600 00000000ffffdd29 0000000000000003 Call Trace: __put_task_struct+0x5d/0x97 kthread_stop+0x50/0x58 offline_pages+0x324/0x3da memory_block_change_state+0x179/0x1db store_mem_state+0x9e/0xbb sysfs_write_file+0xd0/0x107 vfs_write+0xad/0x169 sys_write+0x45/0x6e system_call_fastpath+0x16/0x1b Code: ff 4d 00 0f 94 c0 84 c0 74 08 48 89 ef e8 1f fd ff ff 5b 5d 31 c0 41 5c c3 53 48 8b 87 20 06 00 00 48 89 fb 48 8b bf 18 06 00 00 <8b> 00 48 c7 83 18 06 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0 RIP exit_creds+0x12/0x78 RSP <ffff8806044f1d78> CR2: 0000000000000000 [akpm@linux-foundation.org: add pglist_data.kswapd locking comments] Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-12 04:01:52 +07:00
NODE_DATA(nid)->kswapd = NULL;
}
}
static int __init kswapd_init(void)
{
int nid;
swap_setup();
for_each_node_state(nid, N_MEMORY)
kswapd_run(nid);
hotcpu_notifier(cpu_callback, 0);
return 0;
}
module_init(kswapd_init)
#ifdef CONFIG_NUMA
/*
* Node reclaim mode
*
* If non-zero call node_reclaim when the number of free pages falls below
* the watermarks.
*/
int node_reclaim_mode __read_mostly;
#define RECLAIM_OFF 0
#define RECLAIM_ZONE (1<<0) /* Run shrink_inactive_list on the zone */
#define RECLAIM_WRITE (1<<1) /* Writeout pages during reclaim */
#define RECLAIM_UNMAP (1<<2) /* Unmap pages during reclaim */
/*
* Priority for NODE_RECLAIM. This determines the fraction of pages
* of a node considered for each zone_reclaim. 4 scans 1/16th of
* a zone.
*/
#define NODE_RECLAIM_PRIORITY 4
/*
* Percentage of pages in a zone that must be unmapped for node_reclaim to
* occur.
*/
int sysctl_min_unmapped_ratio = 1;
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 13:31:52 +07:00
/*
* If the number of slab pages in a zone grows beyond this percentage then
* slab reclaim needs to occur.
*/
int sysctl_min_slab_ratio = 5;
static inline unsigned long node_unmapped_file_pages(struct pglist_data *pgdat)
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:20 +07:00
{
unsigned long file_mapped = node_page_state(pgdat, NR_FILE_MAPPED);
unsigned long file_lru = node_page_state(pgdat, NR_INACTIVE_FILE) +
node_page_state(pgdat, NR_ACTIVE_FILE);
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:20 +07:00
/*
* It's possible for there to be more file mapped pages than
* accounted for by the pages on the file LRU lists because
* tmpfs pages accounted for as ANON can also be FILE_MAPPED
*/
return (file_lru > file_mapped) ? (file_lru - file_mapped) : 0;
}
/* Work out how many page cache pages we can reclaim in this reclaim_mode */
static unsigned long node_pagecache_reclaimable(struct pglist_data *pgdat)
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:20 +07:00
{
unsigned long nr_pagecache_reclaimable;
unsigned long delta = 0;
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:20 +07:00
/*
* If RECLAIM_UNMAP is set, then all file pages are considered
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:20 +07:00
* potentially reclaimable. Otherwise, we have to worry about
* pages like swapcache and node_unmapped_file_pages() provides
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:20 +07:00
* a better estimate
*/
if (node_reclaim_mode & RECLAIM_UNMAP)
nr_pagecache_reclaimable = node_page_state(pgdat, NR_FILE_PAGES);
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:20 +07:00
else
nr_pagecache_reclaimable = node_unmapped_file_pages(pgdat);
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:20 +07:00
/* If we can't clean pages, remove dirty pages from consideration */
if (!(node_reclaim_mode & RECLAIM_WRITE))
delta += node_page_state(pgdat, NR_FILE_DIRTY);
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:20 +07:00
/* Watch for any possible underflows due to delta */
if (unlikely(delta > nr_pagecache_reclaimable))
delta = nr_pagecache_reclaimable;
return nr_pagecache_reclaimable - delta;
}
/*
* Try to free up some pages from this node through reclaim.
*/
static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned int order)
{
/* Minimum pages needed in order to stay on node */
const unsigned long nr_pages = 1 << order;
struct task_struct *p = current;
struct reclaim_state reclaim_state;
int classzone_idx = gfp_zone(gfp_mask);
struct scan_control sc = {
.nr_to_reclaim = max(nr_pages, SWAP_CLUSTER_MAX),
mm: teach mm by current context info to not do I/O during memory allocation This patch introduces PF_MEMALLOC_NOIO on process flag('flags' field of 'struct task_struct'), so that the flag can be set by one task to avoid doing I/O inside memory allocation in the task's context. The patch trys to solve one deadlock problem caused by block device, and the problem may happen at least in the below situations: - during block device runtime resume, if memory allocation with GFP_KERNEL is called inside runtime resume callback of any one of its ancestors(or the block device itself), the deadlock may be triggered inside the memory allocation since it might not complete until the block device becomes active and the involed page I/O finishes. The situation is pointed out first by Alan Stern. It is not a good approach to convert all GFP_KERNEL[1] in the path into GFP_NOIO because several subsystems may be involved(for example, PCI, USB and SCSI may be involved for usb mass stoarage device, network devices involved too in the iSCSI case) - during block device runtime suspend, because runtime resume need to wait for completion of concurrent runtime suspend. - during error handling of usb mass storage deivce, USB bus reset will be put on the device, so there shouldn't have any memory allocation with GFP_KERNEL during USB bus reset, otherwise the deadlock similar with above may be triggered. Unfortunately, any usb device may include one mass storage interface in theory, so it requires all usb interface drivers to handle the situation. In fact, most usb drivers don't know how to handle bus reset on the device and don't provide .pre_set() and .post_reset() callback at all, so USB core has to unbind and bind driver for these devices. So it is still not practical to resort to GFP_NOIO for solving the problem. Also the introduced solution can be used by block subsystem or block drivers too, for example, set the PF_MEMALLOC_NOIO flag before doing actual I/O transfer. It is not a good idea to convert all these GFP_KERNEL in the affected path into GFP_NOIO because these functions doing that may be implemented as library and will be called in many other contexts. In fact, memalloc_noio_flags() can convert some of current static GFP_NOIO allocation into GFP_KERNEL back in other non-affected contexts, at least almost all GFP_NOIO in USB subsystem can be converted into GFP_KERNEL after applying the approach and make allocation with GFP_NOIO only happen in runtime resume/bus reset/block I/O transfer contexts generally. [1], several GFP_KERNEL allocation examples in runtime resume path - pci subsystem acpi_os_allocate <-acpi_ut_allocate <-ACPI_ALLOCATE_ZEROED <-acpi_evaluate_object <-__acpi_bus_set_power <-acpi_bus_set_power <-acpi_pci_set_power_state <-platform_pci_set_power_state <-pci_platform_power_transition <-__pci_complete_power_transition <-pci_set_power_state <-pci_restore_standard_config <-pci_pm_runtime_resume - usb subsystem usb_get_status <-finish_port_resume <-usb_port_resume <-generic_resume <-usb_resume_device <-usb_resume_both <-usb_runtime_resume - some individual usb drivers usblp, uvc, gspca, most of dvb-usb-v2 media drivers, cpia2, az6007, .... That is just what I have found. Unfortunately, this allocation can only be found by human being now, and there should be many not found since any function in the resume path(call tree) may allocate memory with GFP_KERNEL. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.de> Cc: Jiri Kosina <jiri.kosina@suse.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Decotigny <david.decotigny@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 07:34:08 +07:00
.gfp_mask = (gfp_mask = memalloc_noio_flags(gfp_mask)),
.order = order,
.priority = NODE_RECLAIM_PRIORITY,
.may_writepage = !!(node_reclaim_mode & RECLAIM_WRITE),
.may_unmap = !!(node_reclaim_mode & RECLAIM_UNMAP),
.may_swap = 1,
.reclaim_idx = classzone_idx,
};
cond_resched();
/*
* We need to be able to allocate from the reserves for RECLAIM_UNMAP
* and we also need to be able to write out pages for RECLAIM_WRITE
* and RECLAIM_UNMAP.
*/
p->flags |= PF_MEMALLOC | PF_SWAPWRITE;
lockdep_set_current_reclaim_state(gfp_mask);
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
if (node_pagecache_reclaimable(pgdat) > pgdat->min_unmapped_pages) {
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 13:31:52 +07:00
/*
* Free memory by calling shrink zone with increasing
* priorities until we have enough memory freed.
*/
do {
shrink_node(pgdat, &sc);
} while (sc.nr_reclaimed < nr_pages && --sc.priority >= 0);
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 13:31:52 +07:00
}
p->reclaim_state = NULL;
current->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE);
lockdep_clear_current_reclaim_state();
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 05:40:01 +07:00
return sc.nr_reclaimed >= nr_pages;
}
int node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned int order)
{
int ret;
/*
* Node reclaim reclaims unmapped file backed pages and
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 13:31:52 +07:00
* slab pages if we are over the defined limits.
*
* A small portion of unmapped file backed pages is needed for
* file I/O otherwise pages read by file I/O will be immediately
* thrown out if the node is overallocated. So we do not reclaim
* if less than a specified percentage of the node is used by
* unmapped file backed pages.
*/
if (node_pagecache_reclaimable(pgdat) <= pgdat->min_unmapped_pages &&
sum_zone_node_page_state(pgdat->node_id, NR_SLAB_RECLAIMABLE) <= pgdat->min_slab_pages)
return NODE_RECLAIM_FULL;
if (!pgdat_reclaimable(pgdat))
return NODE_RECLAIM_FULL;
/*
* Do not scan if the allocation should not be delayed.
*/
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 07:28:21 +07:00
if (!gfpflags_allow_blocking(gfp_mask) || (current->flags & PF_MEMALLOC))
return NODE_RECLAIM_NOSCAN;
/*
* Only run node reclaim on the local node or on nodes that do not
* have associated processors. This will favor the local processor
* over remote processors and spread off node memory allocations
* as wide as possible.
*/
if (node_state(pgdat->node_id, N_CPU) && pgdat->node_id != numa_node_id())
return NODE_RECLAIM_NOSCAN;
if (test_and_set_bit(PGDAT_RECLAIM_LOCKED, &pgdat->flags))
return NODE_RECLAIM_NOSCAN;
vmscan: do not unconditionally treat zones that fail zone_reclaim() as full On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. The problem is that zone_reclaim() failing at all means the zone gets marked full. This can cause situations where a zone is usable, but is being skipped because it has been considered full. Take a situation where a large tmpfs mount is occuping a large percentage of memory overall. The pages do not get cleaned or reclaimed by zone_reclaim(), but the zone gets marked full and the zonelist cache considers them not worth trying in the future. This patch makes zone_reclaim() return more fine-grained information about what occured when zone_reclaim() failued. The zone only gets marked full if it really is unreclaimable. If it's a case that the scan did not occur or if enough pages were not reclaimed with the limited reclaim_mode, then the zone is simply skipped. There is a side-effect to this patch. Currently, if zone_reclaim() successfully reclaimed SWAP_CLUSTER_MAX, an allocation attempt would go ahead. With this patch applied, zone watermarks are rechecked after zone_reclaim() does some work. This bug was introduced by commit 9276b1bc96a132f4068fdee00983c532f43d3a26 ("memory page_alloc zonelist caching speedup") way back in 2.6.19 when the zonelist_cache was introduced. It was not intended that zone_reclaim() aggressively consider the zone to be full when it failed as full direct reclaim can still be an option. Due to the age of the bug, it should be considered a -stable candidate. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:33:22 +07:00
ret = __node_reclaim(pgdat, gfp_mask, order);
clear_bit(PGDAT_RECLAIM_LOCKED, &pgdat->flags);
if (!ret)
count_vm_event(PGSCAN_ZONE_RECLAIM_FAILED);
return ret;
}
#endif
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
/*
* page_evictable - test whether a page is evictable
* @page: the page to test
*
* Test whether page is evictable--i.e., should be placed on active/inactive
* lists vs unevictable list.
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
*
* Reasons page might not be evictable:
Ramfs and Ram Disk pages are unevictable Christoph Lameter pointed out that ram disk pages also clutter the LRU lists. When vmscan finds them dirty and tries to clean them, the ram disk writeback function just redirties the page so that it goes back onto the active list. Round and round she goes... With the ram disk driver [rd.c] replaced by the newer 'brd.c', this is no longer the case, as ram disk pages are no longer maintained on the lru. [This makes them unmigratable for defrag or memory hot remove, but that can be addressed by a separate patch series.] However, the ramfs pages behave like ram disk pages used to, so: Define new address_space flag [shares address_space flags member with mapping's gfp mask] to indicate that the address space contains all unevictable pages. This will provide for efficient testing of ramfs pages in page_evictable(). Also provide wrapper functions to set/test the unevictable state to minimize #ifdefs in ramfs driver and any other users of this facility. Set the unevictable state on address_space structures for new ramfs inodes. Test the unevictable state in page_evictable() to cull unevictable pages. These changes depend on [CONFIG_]UNEVICTABLE_LRU. [riel@redhat.com: undo the brd.c part] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Debugged-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:42 +07:00
* (1) page's mapping marked unevictable
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:44 +07:00
* (2) page is part of an mlocked VMA
Ramfs and Ram Disk pages are unevictable Christoph Lameter pointed out that ram disk pages also clutter the LRU lists. When vmscan finds them dirty and tries to clean them, the ram disk writeback function just redirties the page so that it goes back onto the active list. Round and round she goes... With the ram disk driver [rd.c] replaced by the newer 'brd.c', this is no longer the case, as ram disk pages are no longer maintained on the lru. [This makes them unmigratable for defrag or memory hot remove, but that can be addressed by a separate patch series.] However, the ramfs pages behave like ram disk pages used to, so: Define new address_space flag [shares address_space flags member with mapping's gfp mask] to indicate that the address space contains all unevictable pages. This will provide for efficient testing of ramfs pages in page_evictable(). Also provide wrapper functions to set/test the unevictable state to minimize #ifdefs in ramfs driver and any other users of this facility. Set the unevictable state on address_space structures for new ramfs inodes. Test the unevictable state in page_evictable() to cull unevictable pages. These changes depend on [CONFIG_]UNEVICTABLE_LRU. [riel@redhat.com: undo the brd.c part] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Debugged-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:42 +07:00
*
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
*/
int page_evictable(struct page *page)
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
{
return !mapping_unevictable(page_mapping(page)) && !PageMlocked(page);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 10:26:39 +07:00
}
SHM_UNLOCK: fix long unpreemptible section scan_mapping_unevictable_pages() is used to make SysV SHM_LOCKed pages evictable again once the shared memory is unlocked. It does this with pagevec_lookup()s across the whole object (which might occupy most of memory), and takes 300ms to unlock 7GB here. A cond_resched() every PAGEVEC_SIZE pages would be good. However, KOSAKI-san points out that this is called under shmem.c's info->lock, and it's also under shm.c's shm_lock(), both spinlocks. There is no strong reason for that: we need to take these pages off the unevictable list soonish, but those locks are not required for it. So move the call to scan_mapping_unevictable_pages() from shmem.c's unlock handling up to shm.c's unlock handling. Remove the recently added barrier, not needed now we have spin_unlock() before the scan. Use get_file(), with subsequent fput(), to make sure we have a reference to mapping throughout scan_mapping_unevictable_pages(): that's something that was previously guaranteed by the shm_lock(). Remove shmctl's lru_add_drain_all(): we don't fault in pages at SHM_LOCK time, and we lazily discover them to be Unevictable later, so it serves no purpose for SHM_LOCK; and serves no purpose for SHM_UNLOCK, since pages still on pagevec are not marked Unevictable. The original code avoided redundant rescans by checking VM_LOCKED flag at its level: now avoid them by checking shp's SHM_LOCKED. The original code called scan_mapping_unevictable_pages() on a locked area at shm_destroy() time: perhaps we once had accounting cross-checks which required that, but not now, so skip the overhead and just let inode eviction deal with them. Put check_move_unevictable_page() and scan_mapping_unevictable_pages() under CONFIG_SHMEM (with stub for the TINY case when ramfs is used), more as comment than to save space; comment them used for SHM_UNLOCK. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:19 +07:00
#ifdef CONFIG_SHMEM
/**
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
* check_move_unevictable_pages - check pages for evictability and move to appropriate zone lru list
* @pages: array of pages to check
* @nr_pages: number of pages to check
*
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
* Checks pages for evictability and moves them to the appropriate lru list.
SHM_UNLOCK: fix long unpreemptible section scan_mapping_unevictable_pages() is used to make SysV SHM_LOCKed pages evictable again once the shared memory is unlocked. It does this with pagevec_lookup()s across the whole object (which might occupy most of memory), and takes 300ms to unlock 7GB here. A cond_resched() every PAGEVEC_SIZE pages would be good. However, KOSAKI-san points out that this is called under shmem.c's info->lock, and it's also under shm.c's shm_lock(), both spinlocks. There is no strong reason for that: we need to take these pages off the unevictable list soonish, but those locks are not required for it. So move the call to scan_mapping_unevictable_pages() from shmem.c's unlock handling up to shm.c's unlock handling. Remove the recently added barrier, not needed now we have spin_unlock() before the scan. Use get_file(), with subsequent fput(), to make sure we have a reference to mapping throughout scan_mapping_unevictable_pages(): that's something that was previously guaranteed by the shm_lock(). Remove shmctl's lru_add_drain_all(): we don't fault in pages at SHM_LOCK time, and we lazily discover them to be Unevictable later, so it serves no purpose for SHM_LOCK; and serves no purpose for SHM_UNLOCK, since pages still on pagevec are not marked Unevictable. The original code avoided redundant rescans by checking VM_LOCKED flag at its level: now avoid them by checking shp's SHM_LOCKED. The original code called scan_mapping_unevictable_pages() on a locked area at shm_destroy() time: perhaps we once had accounting cross-checks which required that, but not now, so skip the overhead and just let inode eviction deal with them. Put check_move_unevictable_page() and scan_mapping_unevictable_pages() under CONFIG_SHMEM (with stub for the TINY case when ramfs is used), more as comment than to save space; comment them used for SHM_UNLOCK. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:19 +07:00
*
* This function is only used for SysV IPC SHM_UNLOCK.
*/
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
void check_move_unevictable_pages(struct page **pages, int nr_pages)
{
struct lruvec *lruvec;
struct pglist_data *pgdat = NULL;
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
int pgscanned = 0;
int pgrescued = 0;
int i;
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
for (i = 0; i < nr_pages; i++) {
struct page *page = pages[i];
struct pglist_data *pagepgdat = page_pgdat(page);
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
pgscanned++;
if (pagepgdat != pgdat) {
if (pgdat)
spin_unlock_irq(&pgdat->lru_lock);
pgdat = pagepgdat;
spin_lock_irq(&pgdat->lru_lock);
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
}
lruvec = mem_cgroup_page_lruvec(page, pgdat);
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
if (!PageLRU(page) || !PageUnevictable(page))
continue;
if (page_evictable(page)) {
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
enum lru_list lru = page_lru_base_type(page);
VM_BUG_ON_PAGE(PageActive(page), page);
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
ClearPageUnevictable(page);
del_page_from_lru_list(page, lruvec, LRU_UNEVICTABLE);
add_page_to_lru_list(page, lruvec, lru);
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
pgrescued++;
}
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
}
if (pgdat) {
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
__count_vm_events(UNEVICTABLE_PGRESCUED, pgrescued);
__count_vm_events(UNEVICTABLE_PGSCANNED, pgscanned);
spin_unlock_irq(&pgdat->lru_lock);
}
}
SHM_UNLOCK: fix long unpreemptible section scan_mapping_unevictable_pages() is used to make SysV SHM_LOCKed pages evictable again once the shared memory is unlocked. It does this with pagevec_lookup()s across the whole object (which might occupy most of memory), and takes 300ms to unlock 7GB here. A cond_resched() every PAGEVEC_SIZE pages would be good. However, KOSAKI-san points out that this is called under shmem.c's info->lock, and it's also under shm.c's shm_lock(), both spinlocks. There is no strong reason for that: we need to take these pages off the unevictable list soonish, but those locks are not required for it. So move the call to scan_mapping_unevictable_pages() from shmem.c's unlock handling up to shm.c's unlock handling. Remove the recently added barrier, not needed now we have spin_unlock() before the scan. Use get_file(), with subsequent fput(), to make sure we have a reference to mapping throughout scan_mapping_unevictable_pages(): that's something that was previously guaranteed by the shm_lock(). Remove shmctl's lru_add_drain_all(): we don't fault in pages at SHM_LOCK time, and we lazily discover them to be Unevictable later, so it serves no purpose for SHM_LOCK; and serves no purpose for SHM_UNLOCK, since pages still on pagevec are not marked Unevictable. The original code avoided redundant rescans by checking VM_LOCKED flag at its level: now avoid them by checking shp's SHM_LOCKED. The original code called scan_mapping_unevictable_pages() on a locked area at shm_destroy() time: perhaps we once had accounting cross-checks which required that, but not now, so skip the overhead and just let inode eviction deal with them. Put check_move_unevictable_page() and scan_mapping_unevictable_pages() under CONFIG_SHMEM (with stub for the TINY case when ramfs is used), more as comment than to save space; comment them used for SHM_UNLOCK. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:19 +07:00
#endif /* CONFIG_SHMEM */