linux_dsm_epyc7002/net/bridge/br_private.h

970 lines
27 KiB
C
Raw Normal View History

/*
* Linux ethernet bridge
*
* Authors:
* Lennert Buytenhek <buytenh@gnu.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _BR_PRIVATE_H
#define _BR_PRIVATE_H
#include <linux/netdevice.h>
#include <linux/if_bridge.h>
#include <linux/netpoll.h>
#include <linux/u64_stats_sync.h>
#include <net/route.h>
#include <net/ip6_fib.h>
#include <linux/if_vlan.h>
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
#include <linux/rhashtable.h>
#define BR_HASH_BITS 8
#define BR_HASH_SIZE (1 << BR_HASH_BITS)
#define BR_HOLD_TIME (1*HZ)
#define BR_PORT_BITS 10
#define BR_MAX_PORTS (1<<BR_PORT_BITS)
#define BR_VERSION "2.3"
/* Control of forwarding link local multicast */
#define BR_GROUPFWD_DEFAULT 0
/* Don't allow forwarding of control protocols like STP, MAC PAUSE and LACP */
#define BR_GROUPFWD_RESTRICTED 0x0007u
/* The Nearest Customer Bridge Group Address, 01-80-C2-00-00-[00,0B,0C,0D,0F] */
#define BR_GROUPFWD_8021AD 0xB801u
/* Path to usermode spanning tree program */
#define BR_STP_PROG "/sbin/bridge-stp"
typedef struct bridge_id bridge_id;
typedef struct mac_addr mac_addr;
typedef __u16 port_id;
struct bridge_id
{
unsigned char prio[2];
unsigned char addr[ETH_ALEN];
};
struct mac_addr
{
unsigned char addr[ETH_ALEN];
};
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
/* our own querier */
struct bridge_mcast_own_query {
struct timer_list timer;
u32 startup_sent;
};
/* other querier */
struct bridge_mcast_other_query {
struct timer_list timer;
unsigned long delay_time;
};
/* selected querier */
struct bridge_mcast_querier {
struct br_ip addr;
struct net_bridge_port __rcu *port;
};
#endif
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
/**
* struct net_bridge_vlan - per-vlan entry
*
* @vnode: rhashtable member
* @vid: VLAN id
* @flags: bridge vlan flags
* @br: if MASTER flag set, this points to a bridge struct
* @port: if MASTER flag unset, this points to a port struct
* @refcnt: if MASTER flag set, this is bumped for each port referencing it
* @brvlan: if MASTER flag unset, this points to the global per-VLAN context
* for this VLAN entry
* @vlist: sorted list of VLAN entries
* @rcu: used for entry destruction
*
* This structure is shared between the global per-VLAN entries contained in
* the bridge rhashtable and the local per-port per-VLAN entries contained in
* the port's rhashtable. The union entries should be interpreted depending on
* the entry flags that are set.
*/
struct net_bridge_vlan {
struct rhash_head vnode;
u16 vid;
u16 flags;
union {
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
struct net_bridge *br;
struct net_bridge_port *port;
};
union {
atomic_t refcnt;
struct net_bridge_vlan *brvlan;
};
struct list_head vlist;
struct rcu_head rcu;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
};
/**
* struct net_bridge_vlan_group
*
* @vlan_hash: VLAN entry rhashtable
* @vlan_list: sorted VLAN entry list
* @num_vlans: number of total VLAN entries
* @pvid: PVID VLAN id
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
*
* IMPORTANT: Be careful when checking if there're VLAN entries using list
* primitives because the bridge can have entries in its list which
* are just for global context but not for filtering, i.e. they have
* the master flag set but not the brentry flag. If you have to check
* if there're "real" entries in the bridge please test @num_vlans
*/
struct net_bridge_vlan_group {
struct rhashtable vlan_hash;
struct list_head vlan_list;
u16 num_vlans;
u16 pvid;
};
struct net_bridge_fdb_entry
{
struct hlist_node hlist;
struct net_bridge_port *dst;
unsigned long updated;
unsigned long used;
mac_addr addr;
bridge: fdb: rearrange net_bridge_fdb_entry While looking into fixing the local entries scalability issue I noticed that the structure is badly arranged because vlan_id would fall in a second cache line while keeping rcu which is used only when deleting in the first, so re-arrange the structure and push rcu to the end so we can get 16 bytes which can be used for other fields (by pushing rcu fully in the second 64 byte chunk). With this change all the core necessary information when doing fdb lookups will be available in a single cache line. pahole before (note vlan_id): struct net_bridge_fdb_entry { struct hlist_node hlist; /* 0 16 */ struct net_bridge_port * dst; /* 16 8 */ struct callback_head rcu; /* 24 16 */ long unsigned int updated; /* 40 8 */ long unsigned int used; /* 48 8 */ mac_addr addr; /* 56 6 */ unsigned char is_local:1; /* 62: 7 1 */ unsigned char is_static:1; /* 62: 6 1 */ unsigned char added_by_user:1; /* 62: 5 1 */ unsigned char added_by_external_learn:1; /* 62: 4 1 */ /* XXX 4 bits hole, try to pack */ /* XXX 1 byte hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ __u16 vlan_id; /* 64 2 */ /* size: 72, cachelines: 2, members: 11 */ /* sum members: 65, holes: 1, sum holes: 1 */ /* bit holes: 1, sum bit holes: 4 bits */ /* padding: 6 */ /* last cacheline: 8 bytes */ } pahole after (note vlan_id): struct net_bridge_fdb_entry { struct hlist_node hlist; /* 0 16 */ struct net_bridge_port * dst; /* 16 8 */ long unsigned int updated; /* 24 8 */ long unsigned int used; /* 32 8 */ mac_addr addr; /* 40 6 */ __u16 vlan_id; /* 46 2 */ unsigned char is_local:1; /* 48: 7 1 */ unsigned char is_static:1; /* 48: 6 1 */ unsigned char added_by_user:1; /* 48: 5 1 */ unsigned char added_by_external_learn:1; /* 48: 4 1 */ /* XXX 4 bits hole, try to pack */ /* XXX 7 bytes hole, try to pack */ struct callback_head rcu; /* 56 16 */ /* --- cacheline 1 boundary (64 bytes) was 8 bytes ago --- */ /* size: 72, cachelines: 2, members: 11 */ /* sum members: 65, holes: 1, sum holes: 7 */ /* bit holes: 1, sum bit holes: 4 bits */ /* last cacheline: 8 bytes */ } Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 04:19:20 +07:00
__u16 vlan_id;
unsigned char is_local:1,
is_static:1,
added_by_user:1,
added_by_external_learn:1;
bridge: fdb: rearrange net_bridge_fdb_entry While looking into fixing the local entries scalability issue I noticed that the structure is badly arranged because vlan_id would fall in a second cache line while keeping rcu which is used only when deleting in the first, so re-arrange the structure and push rcu to the end so we can get 16 bytes which can be used for other fields (by pushing rcu fully in the second 64 byte chunk). With this change all the core necessary information when doing fdb lookups will be available in a single cache line. pahole before (note vlan_id): struct net_bridge_fdb_entry { struct hlist_node hlist; /* 0 16 */ struct net_bridge_port * dst; /* 16 8 */ struct callback_head rcu; /* 24 16 */ long unsigned int updated; /* 40 8 */ long unsigned int used; /* 48 8 */ mac_addr addr; /* 56 6 */ unsigned char is_local:1; /* 62: 7 1 */ unsigned char is_static:1; /* 62: 6 1 */ unsigned char added_by_user:1; /* 62: 5 1 */ unsigned char added_by_external_learn:1; /* 62: 4 1 */ /* XXX 4 bits hole, try to pack */ /* XXX 1 byte hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ __u16 vlan_id; /* 64 2 */ /* size: 72, cachelines: 2, members: 11 */ /* sum members: 65, holes: 1, sum holes: 1 */ /* bit holes: 1, sum bit holes: 4 bits */ /* padding: 6 */ /* last cacheline: 8 bytes */ } pahole after (note vlan_id): struct net_bridge_fdb_entry { struct hlist_node hlist; /* 0 16 */ struct net_bridge_port * dst; /* 16 8 */ long unsigned int updated; /* 24 8 */ long unsigned int used; /* 32 8 */ mac_addr addr; /* 40 6 */ __u16 vlan_id; /* 46 2 */ unsigned char is_local:1; /* 48: 7 1 */ unsigned char is_static:1; /* 48: 6 1 */ unsigned char added_by_user:1; /* 48: 5 1 */ unsigned char added_by_external_learn:1; /* 48: 4 1 */ /* XXX 4 bits hole, try to pack */ /* XXX 7 bytes hole, try to pack */ struct callback_head rcu; /* 56 16 */ /* --- cacheline 1 boundary (64 bytes) was 8 bytes ago --- */ /* size: 72, cachelines: 2, members: 11 */ /* sum members: 65, holes: 1, sum holes: 7 */ /* bit holes: 1, sum bit holes: 4 bits */ /* last cacheline: 8 bytes */ } Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 04:19:20 +07:00
struct rcu_head rcu;
};
struct net_bridge_port_group {
struct net_bridge_port *port;
struct net_bridge_port_group __rcu *next;
struct hlist_node mglist;
struct rcu_head rcu;
struct timer_list timer;
struct br_ip addr;
unsigned char state;
};
struct net_bridge_mdb_entry
{
struct hlist_node hlist[2];
struct net_bridge *br;
struct net_bridge_port_group __rcu *ports;
struct rcu_head rcu;
struct timer_list timer;
struct br_ip addr;
bool mglist;
};
struct net_bridge_mdb_htable
{
struct hlist_head *mhash;
struct rcu_head rcu;
struct net_bridge_mdb_htable *old;
u32 size;
u32 max;
u32 secret;
u32 ver;
};
struct net_bridge_port
{
struct net_bridge *br;
struct net_device *dev;
struct list_head list;
/* STP */
u8 priority;
u8 state;
u16 port_no;
unsigned char topology_change_ack;
unsigned char config_pending;
port_id port_id;
port_id designated_port;
bridge_id designated_root;
bridge_id designated_bridge;
u32 path_cost;
u32 designated_cost;
unsigned long designated_age;
struct timer_list forward_delay_timer;
struct timer_list hold_timer;
struct timer_list message_age_timer;
struct kobject kobj;
struct rcu_head rcu;
unsigned long flags;
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
struct bridge_mcast_own_query ip4_own_query;
#if IS_ENABLED(CONFIG_IPV6)
struct bridge_mcast_own_query ip6_own_query;
#endif /* IS_ENABLED(CONFIG_IPV6) */
unsigned char multicast_router;
struct timer_list multicast_router_timer;
struct hlist_head mglist;
struct hlist_node rlist;
#endif
#ifdef CONFIG_SYSFS
char sysfs_name[IFNAMSIZ];
#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
struct netpoll *np;
#endif
#ifdef CONFIG_BRIDGE_VLAN_FILTERING
struct net_bridge_vlan_group __rcu *vlgrp;
#endif
};
#define br_auto_port(p) ((p)->flags & BR_AUTO_MASK)
#define br_promisc_port(p) ((p)->flags & BR_PROMISC)
#define br_port_exists(dev) (dev->priv_flags & IFF_BRIDGE_PORT)
static inline struct net_bridge_port *br_port_get_rcu(const struct net_device *dev)
{
return rcu_dereference(dev->rx_handler_data);
}
static inline struct net_bridge_port *br_port_get_rtnl(const struct net_device *dev)
{
return br_port_exists(dev) ?
rtnl_dereference(dev->rx_handler_data) : NULL;
}
struct net_bridge
{
spinlock_t lock;
struct list_head port_list;
struct net_device *dev;
struct pcpu_sw_netstats __percpu *stats;
spinlock_t hash_lock;
struct hlist_head hash[BR_HASH_SIZE];
#if IS_ENABLED(CONFIG_BRIDGE_NETFILTER)
union {
struct rtable fake_rtable;
struct rt6_info fake_rt6_info;
};
bool nf_call_iptables;
bool nf_call_ip6tables;
bool nf_call_arptables;
#endif
u16 group_fwd_mask;
u16 group_fwd_mask_required;
/* STP */
bridge_id designated_root;
bridge_id bridge_id;
u32 root_path_cost;
unsigned long max_age;
unsigned long hello_time;
unsigned long forward_delay;
unsigned long bridge_max_age;
unsigned long ageing_time;
unsigned long bridge_hello_time;
unsigned long bridge_forward_delay;
u8 group_addr[ETH_ALEN];
bool group_addr_set;
u16 root_port;
enum {
BR_NO_STP, /* no spanning tree */
BR_KERNEL_STP, /* old STP in kernel */
BR_USER_STP, /* new RSTP in userspace */
} stp_enabled;
unsigned char topology_change;
unsigned char topology_change_detected;
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
unsigned char multicast_router;
u8 multicast_disabled:1;
u8 multicast_querier:1;
u8 multicast_query_use_ifaddr:1;
u32 hash_elasticity;
u32 hash_max;
u32 multicast_last_member_count;
u32 multicast_startup_query_count;
unsigned long multicast_last_member_interval;
unsigned long multicast_membership_interval;
unsigned long multicast_querier_interval;
unsigned long multicast_query_interval;
unsigned long multicast_query_response_interval;
unsigned long multicast_startup_query_interval;
spinlock_t multicast_lock;
struct net_bridge_mdb_htable __rcu *mdb;
struct hlist_head router_list;
struct timer_list multicast_router_timer;
struct bridge_mcast_other_query ip4_other_query;
struct bridge_mcast_own_query ip4_own_query;
struct bridge_mcast_querier ip4_querier;
#if IS_ENABLED(CONFIG_IPV6)
struct bridge_mcast_other_query ip6_other_query;
struct bridge_mcast_own_query ip6_own_query;
struct bridge_mcast_querier ip6_querier;
#endif /* IS_ENABLED(CONFIG_IPV6) */
#endif
struct timer_list hello_timer;
struct timer_list tcn_timer;
struct timer_list topology_change_timer;
struct timer_list gc_timer;
struct kobject *ifobj;
u32 auto_cnt;
#ifdef CONFIG_BRIDGE_VLAN_FILTERING
struct net_bridge_vlan_group __rcu *vlgrp;
u8 vlan_enabled;
__be16 vlan_proto;
u16 default_pvid;
#endif
};
struct br_input_skb_cb {
struct net_device *brdev;
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
int igmp;
int mrouters_only;
#endif
bool proxyarp_replied;
#ifdef CONFIG_BRIDGE_VLAN_FILTERING
bool vlan_filtered;
#endif
};
#define BR_INPUT_SKB_CB(__skb) ((struct br_input_skb_cb *)(__skb)->cb)
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
# define BR_INPUT_SKB_CB_MROUTERS_ONLY(__skb) (BR_INPUT_SKB_CB(__skb)->mrouters_only)
#else
# define BR_INPUT_SKB_CB_MROUTERS_ONLY(__skb) (0)
#endif
#define br_printk(level, br, format, args...) \
printk(level "%s: " format, (br)->dev->name, ##args)
#define br_err(__br, format, args...) \
br_printk(KERN_ERR, __br, format, ##args)
#define br_warn(__br, format, args...) \
br_printk(KERN_WARNING, __br, format, ##args)
#define br_notice(__br, format, args...) \
br_printk(KERN_NOTICE, __br, format, ##args)
#define br_info(__br, format, args...) \
br_printk(KERN_INFO, __br, format, ##args)
#define br_debug(br, format, args...) \
pr_debug("%s: " format, (br)->dev->name, ##args)
/* called under bridge lock */
static inline int br_is_root_bridge(const struct net_bridge *br)
{
return !memcmp(&br->bridge_id, &br->designated_root, 8);
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
/* check if a VLAN entry is global */
static inline bool br_vlan_is_master(const struct net_bridge_vlan *v)
{
return v->flags & BRIDGE_VLAN_INFO_MASTER;
}
/* check if a VLAN entry is used by the bridge */
static inline bool br_vlan_is_brentry(const struct net_bridge_vlan *v)
{
return v->flags & BRIDGE_VLAN_INFO_BRENTRY;
}
/* check if we should use the vlan entry, returns false if it's only context */
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
static inline bool br_vlan_should_use(const struct net_bridge_vlan *v)
{
if (br_vlan_is_master(v)) {
if (br_vlan_is_brentry(v))
return true;
else
return false;
}
return true;
}
/* br_device.c */
void br_dev_setup(struct net_device *dev);
void br_dev_delete(struct net_device *dev, struct list_head *list);
netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev);
#ifdef CONFIG_NET_POLL_CONTROLLER
static inline void br_netpoll_send_skb(const struct net_bridge_port *p,
struct sk_buff *skb)
{
struct netpoll *np = p->np;
if (np)
netpoll_send_skb(np, skb);
}
netpoll: Remove gfp parameter from __netpoll_setup The gfp parameter was added in: commit 47be03a28cc6c80e3aa2b3e8ed6d960ff0c5c0af Author: Amerigo Wang <amwang@redhat.com> Date: Fri Aug 10 01:24:37 2012 +0000 netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> The reason for the gfp parameter was removed in: commit c4cdef9b7183159c23c7302aaf270d64c549f557 Author: dingtianhong <dingtianhong@huawei.com> Date: Tue Jul 23 15:25:27 2013 +0800 bonding: don't call slave_xxx_netpoll under spinlocks The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Nothing else that calls __netpoll_setup or ndo_netpoll_setup requires a gfp paramter, so remove the gfp parameter from both of these functions making the code clearer. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 05:36:38 +07:00
int br_netpoll_enable(struct net_bridge_port *p);
void br_netpoll_disable(struct net_bridge_port *p);
#else
static inline void br_netpoll_send_skb(const struct net_bridge_port *p,
struct sk_buff *skb)
{
}
netpoll: Remove gfp parameter from __netpoll_setup The gfp parameter was added in: commit 47be03a28cc6c80e3aa2b3e8ed6d960ff0c5c0af Author: Amerigo Wang <amwang@redhat.com> Date: Fri Aug 10 01:24:37 2012 +0000 netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> The reason for the gfp parameter was removed in: commit c4cdef9b7183159c23c7302aaf270d64c549f557 Author: dingtianhong <dingtianhong@huawei.com> Date: Tue Jul 23 15:25:27 2013 +0800 bonding: don't call slave_xxx_netpoll under spinlocks The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Nothing else that calls __netpoll_setup or ndo_netpoll_setup requires a gfp paramter, so remove the gfp parameter from both of these functions making the code clearer. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 05:36:38 +07:00
static inline int br_netpoll_enable(struct net_bridge_port *p)
{
return 0;
}
static inline void br_netpoll_disable(struct net_bridge_port *p)
{
}
#endif
/* br_fdb.c */
int br_fdb_init(void);
void br_fdb_fini(void);
void br_fdb_flush(struct net_bridge *br);
void br_fdb_find_delete_local(struct net_bridge *br,
const struct net_bridge_port *p,
const unsigned char *addr, u16 vid);
void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr);
void br_fdb_change_mac_address(struct net_bridge *br, const u8 *newaddr);
void br_fdb_cleanup(unsigned long arg);
void br_fdb_delete_by_port(struct net_bridge *br,
const struct net_bridge_port *p, u16 vid, int do_all);
struct net_bridge_fdb_entry *__br_fdb_get(struct net_bridge *br,
const unsigned char *addr, __u16 vid);
int br_fdb_test_addr(struct net_device *dev, unsigned char *addr);
int br_fdb_fillbuf(struct net_bridge *br, void *buf, unsigned long count,
unsigned long off);
int br_fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
const unsigned char *addr, u16 vid);
void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source,
const unsigned char *addr, u16 vid, bool added_by_user);
int br_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[],
struct net_device *dev, const unsigned char *addr, u16 vid);
int br_fdb_add(struct ndmsg *nlh, struct nlattr *tb[], struct net_device *dev,
const unsigned char *addr, u16 vid, u16 nlh_flags);
int br_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb,
struct net_device *dev, struct net_device *fdev, int idx);
int br_fdb_sync_static(struct net_bridge *br, struct net_bridge_port *p);
void br_fdb_unsync_static(struct net_bridge *br, struct net_bridge_port *p);
int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p,
const unsigned char *addr, u16 vid);
int br_fdb_external_learn_del(struct net_bridge *br, struct net_bridge_port *p,
const unsigned char *addr, u16 vid);
/* br_forward.c */
void br_deliver(const struct net_bridge_port *to, struct sk_buff *skb);
int br_dev_queue_push_xmit(struct net *net, struct sock *sk, struct sk_buff *skb);
void br_forward(const struct net_bridge_port *to,
struct sk_buff *skb, struct sk_buff *skb0);
int br_forward_finish(struct net *net, struct sock *sk, struct sk_buff *skb);
void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb, bool unicast);
void br_flood_forward(struct net_bridge *br, struct sk_buff *skb,
struct sk_buff *skb2, bool unicast);
/* br_if.c */
void br_port_carrier_check(struct net_bridge_port *p);
int br_add_bridge(struct net *net, const char *name);
int br_del_bridge(struct net *net, const char *name);
int br_add_if(struct net_bridge *br, struct net_device *dev);
int br_del_if(struct net_bridge *br, struct net_device *dev);
int br_min_mtu(const struct net_bridge *br);
netdev_features_t br_features_recompute(struct net_bridge *br,
netdev_features_t features);
void br_port_flags_change(struct net_bridge_port *port, unsigned long mask);
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 20:59:20 +07:00
void br_manage_promisc(struct net_bridge *br);
/* br_input.c */
int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb);
rx_handler_result_t br_handle_frame(struct sk_buff **pskb);
static inline bool br_rx_handler_check_rcu(const struct net_device *dev)
{
return rcu_dereference(dev->rx_handler) == br_handle_frame;
}
static inline struct net_bridge_port *br_port_get_check_rcu(const struct net_device *dev)
{
return br_rx_handler_check_rcu(dev) ? br_port_get_rcu(dev) : NULL;
}
/* br_ioctl.c */
int br_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
int br_ioctl_deviceless_stub(struct net *net, unsigned int cmd,
void __user *arg);
/* br_multicast.c */
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
extern unsigned int br_mdb_rehash_seq;
int br_multicast_rcv(struct net_bridge *br, struct net_bridge_port *port,
struct sk_buff *skb, u16 vid);
struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
struct sk_buff *skb, u16 vid);
void br_multicast_add_port(struct net_bridge_port *port);
void br_multicast_del_port(struct net_bridge_port *port);
void br_multicast_enable_port(struct net_bridge_port *port);
void br_multicast_disable_port(struct net_bridge_port *port);
void br_multicast_init(struct net_bridge *br);
void br_multicast_open(struct net_bridge *br);
void br_multicast_stop(struct net_bridge *br);
void br_multicast_dev_del(struct net_bridge *br);
void br_multicast_deliver(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb);
void br_multicast_forward(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb, struct sk_buff *skb2);
int br_multicast_set_router(struct net_bridge *br, unsigned long val);
int br_multicast_set_port_router(struct net_bridge_port *p, unsigned long val);
int br_multicast_toggle(struct net_bridge *br, unsigned long val);
int br_multicast_set_querier(struct net_bridge *br, unsigned long val);
int br_multicast_set_hash_max(struct net_bridge *br, unsigned long val);
struct net_bridge_mdb_entry *
br_mdb_ip_get(struct net_bridge_mdb_htable *mdb, struct br_ip *dst);
struct net_bridge_mdb_entry *
br_multicast_new_group(struct net_bridge *br, struct net_bridge_port *port,
struct br_ip *group);
void br_multicast_free_pg(struct rcu_head *head);
struct net_bridge_port_group *
br_multicast_new_port_group(struct net_bridge_port *port, struct br_ip *group,
struct net_bridge_port_group __rcu *next,
unsigned char state);
void br_mdb_init(void);
void br_mdb_uninit(void);
void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port,
struct br_ip *group, int type, u8 state);
void br_rtr_notify(struct net_device *dev, struct net_bridge_port *port,
int type);
#define mlock_dereference(X, br) \
rcu_dereference_protected(X, lockdep_is_held(&br->multicast_lock))
static inline bool br_multicast_is_router(struct net_bridge *br)
{
return br->multicast_router == 2 ||
(br->multicast_router == 1 &&
timer_pending(&br->multicast_router_timer));
}
static inline bool
__br_multicast_querier_exists(struct net_bridge *br,
struct bridge_mcast_other_query *querier)
{
return time_is_before_jiffies(querier->delay_time) &&
(br->multicast_querier || timer_pending(&querier->timer));
}
static inline bool br_multicast_querier_exists(struct net_bridge *br,
struct ethhdr *eth)
{
switch (eth->h_proto) {
case (htons(ETH_P_IP)):
return __br_multicast_querier_exists(br, &br->ip4_other_query);
#if IS_ENABLED(CONFIG_IPV6)
case (htons(ETH_P_IPV6)):
return __br_multicast_querier_exists(br, &br->ip6_other_query);
#endif
default:
return false;
}
}
#else
static inline int br_multicast_rcv(struct net_bridge *br,
struct net_bridge_port *port,
struct sk_buff *skb,
u16 vid)
{
return 0;
}
static inline struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
struct sk_buff *skb, u16 vid)
{
return NULL;
}
static inline void br_multicast_add_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_del_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_enable_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_disable_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_init(struct net_bridge *br)
{
}
static inline void br_multicast_open(struct net_bridge *br)
{
}
static inline void br_multicast_stop(struct net_bridge *br)
{
}
static inline void br_multicast_dev_del(struct net_bridge *br)
{
}
static inline void br_multicast_deliver(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb)
{
}
static inline void br_multicast_forward(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb,
struct sk_buff *skb2)
{
}
static inline bool br_multicast_is_router(struct net_bridge *br)
{
return 0;
}
static inline bool br_multicast_querier_exists(struct net_bridge *br,
struct ethhdr *eth)
{
return false;
}
static inline void br_mdb_init(void)
{
}
static inline void br_mdb_uninit(void)
{
}
#endif
/* br_vlan.c */
#ifdef CONFIG_BRIDGE_VLAN_FILTERING
bool br_allowed_ingress(const struct net_bridge *br,
struct net_bridge_vlan_group *vg, struct sk_buff *skb,
u16 *vid);
bool br_allowed_egress(struct net_bridge_vlan_group *vg,
const struct sk_buff *skb);
bool br_should_learn(struct net_bridge_port *p, struct sk_buff *skb, u16 *vid);
struct sk_buff *br_handle_vlan(struct net_bridge *br,
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
struct net_bridge_vlan_group *vg,
struct sk_buff *skb);
int br_vlan_add(struct net_bridge *br, u16 vid, u16 flags);
int br_vlan_delete(struct net_bridge *br, u16 vid);
void br_vlan_flush(struct net_bridge *br);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
struct net_bridge_vlan *br_vlan_find(struct net_bridge_vlan_group *vg, u16 vid);
void br_recalculate_fwd_mask(struct net_bridge *br);
int __br_vlan_filter_toggle(struct net_bridge *br, unsigned long val);
int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val);
int __br_vlan_set_proto(struct net_bridge *br, __be16 proto);
int br_vlan_set_proto(struct net_bridge *br, unsigned long val);
int br_vlan_init(struct net_bridge *br);
int br_vlan_set_default_pvid(struct net_bridge *br, unsigned long val);
int __br_vlan_set_default_pvid(struct net_bridge *br, u16 pvid);
int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags);
int nbp_vlan_delete(struct net_bridge_port *port, u16 vid);
void nbp_vlan_flush(struct net_bridge_port *port);
int nbp_vlan_init(struct net_bridge_port *port);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
int nbp_get_num_vlan_infos(struct net_bridge_port *p, u32 filter_mask);
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
static inline struct net_bridge_vlan_group *br_vlan_group(
const struct net_bridge *br)
{
return rtnl_dereference(br->vlgrp);
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
static inline struct net_bridge_vlan_group *nbp_vlan_group(
const struct net_bridge_port *p)
{
return rtnl_dereference(p->vlgrp);
}
static inline struct net_bridge_vlan_group *br_vlan_group_rcu(
const struct net_bridge *br)
{
return rcu_dereference(br->vlgrp);
}
static inline struct net_bridge_vlan_group *nbp_vlan_group_rcu(
const struct net_bridge_port *p)
{
return rcu_dereference(p->vlgrp);
}
/* Since bridge now depends on 8021Q module, but the time bridge sees the
* skb, the vlan tag will always be present if the frame was tagged.
*/
static inline int br_vlan_get_tag(const struct sk_buff *skb, u16 *vid)
{
int err = 0;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
if (skb_vlan_tag_present(skb)) {
*vid = skb_vlan_tag_get(skb) & VLAN_VID_MASK;
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
} else {
*vid = 0;
err = -EINVAL;
}
return err;
}
static inline u16 br_get_pvid(const struct net_bridge_vlan_group *vg)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
{
if (!vg)
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
return 0;
smp_rmb();
return vg->pvid;
}
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 20:59:20 +07:00
static inline int br_vlan_enabled(struct net_bridge *br)
{
return br->vlan_enabled;
}
#else
static inline bool br_allowed_ingress(const struct net_bridge *br,
struct net_bridge_vlan_group *vg,
struct sk_buff *skb,
u16 *vid)
{
return true;
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
static inline bool br_allowed_egress(struct net_bridge_vlan_group *vg,
const struct sk_buff *skb)
{
return true;
}
static inline bool br_should_learn(struct net_bridge_port *p,
struct sk_buff *skb, u16 *vid)
{
return true;
}
static inline struct sk_buff *br_handle_vlan(struct net_bridge *br,
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
struct net_bridge_vlan_group *vg,
struct sk_buff *skb)
{
return skb;
}
static inline int br_vlan_add(struct net_bridge *br, u16 vid, u16 flags)
{
return -EOPNOTSUPP;
}
static inline int br_vlan_delete(struct net_bridge *br, u16 vid)
{
return -EOPNOTSUPP;
}
static inline void br_vlan_flush(struct net_bridge *br)
{
}
static inline void br_recalculate_fwd_mask(struct net_bridge *br)
{
}
static inline int br_vlan_init(struct net_bridge *br)
{
return 0;
}
static inline int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags)
{
return -EOPNOTSUPP;
}
static inline int nbp_vlan_delete(struct net_bridge_port *port, u16 vid)
{
return -EOPNOTSUPP;
}
static inline void nbp_vlan_flush(struct net_bridge_port *port)
{
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
static inline struct net_bridge_vlan *br_vlan_find(struct net_bridge_vlan_group *vg,
u16 vid)
{
return NULL;
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
static inline int nbp_vlan_init(struct net_bridge_port *port)
{
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
return 0;
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
static inline u16 br_vlan_get_tag(const struct sk_buff *skb, u16 *tag)
{
return 0;
}
static inline u16 br_get_pvid(const struct net_bridge_vlan_group *vg)
{
return 0;
}
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 20:59:20 +07:00
static inline int br_vlan_enabled(struct net_bridge *br)
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 20:59:20 +07:00
{
return 0;
}
static inline int __br_vlan_filter_toggle(struct net_bridge *br,
unsigned long val)
{
return -EOPNOTSUPP;
}
bridge: vlan: add per-vlan struct and move to rhashtables This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26 00:00:11 +07:00
static inline int nbp_get_num_vlan_infos(struct net_bridge_port *p,
u32 filter_mask)
{
return 0;
}
static inline struct net_bridge_vlan_group *br_vlan_group(
const struct net_bridge *br)
{
return NULL;
}
static inline struct net_bridge_vlan_group *nbp_vlan_group(
const struct net_bridge_port *p)
{
return NULL;
}
static inline struct net_bridge_vlan_group *br_vlan_group_rcu(
const struct net_bridge *br)
{
return NULL;
}
static inline struct net_bridge_vlan_group *nbp_vlan_group_rcu(
const struct net_bridge_port *p)
{
return NULL;
}
#endif
struct nf_br_ops {
int (*br_dev_xmit_hook)(struct sk_buff *skb);
};
extern const struct nf_br_ops __rcu *nf_br_ops;
/* br_netfilter.c */
#if IS_ENABLED(CONFIG_BRIDGE_NETFILTER)
int br_nf_core_init(void);
void br_nf_core_fini(void);
void br_netfilter_rtable_init(struct net_bridge *);
#else
static inline int br_nf_core_init(void) { return 0; }
static inline void br_nf_core_fini(void) {}
#define br_netfilter_rtable_init(x)
#endif
/* br_stp.c */
void br_log_state(const struct net_bridge_port *p);
void br_set_state(struct net_bridge_port *p, unsigned int state);
struct net_bridge_port *br_get_port(struct net_bridge *br, u16 port_no);
void br_init_port(struct net_bridge_port *p);
void br_become_designated_port(struct net_bridge_port *p);
void __br_set_forward_delay(struct net_bridge *br, unsigned long t);
int br_set_forward_delay(struct net_bridge *br, unsigned long x);
int br_set_hello_time(struct net_bridge *br, unsigned long x);
int br_set_max_age(struct net_bridge *br, unsigned long x);
int br_set_ageing_time(struct net_bridge *br, u32 ageing_time);
/* br_stp_if.c */
void br_stp_enable_bridge(struct net_bridge *br);
void br_stp_disable_bridge(struct net_bridge *br);
void br_stp_set_enabled(struct net_bridge *br, unsigned long val);
void br_stp_enable_port(struct net_bridge_port *p);
void br_stp_disable_port(struct net_bridge_port *p);
bool br_stp_recalculate_bridge_id(struct net_bridge *br);
void br_stp_change_bridge_id(struct net_bridge *br, const unsigned char *a);
void br_stp_set_bridge_priority(struct net_bridge *br, u16 newprio);
int br_stp_set_port_priority(struct net_bridge_port *p, unsigned long newprio);
int br_stp_set_path_cost(struct net_bridge_port *p, unsigned long path_cost);
ssize_t br_show_bridge_id(char *buf, const struct bridge_id *id);
/* br_stp_bpdu.c */
struct stp_proto;
void br_stp_rcv(const struct stp_proto *proto, struct sk_buff *skb,
struct net_device *dev);
/* br_stp_timer.c */
void br_stp_timer_init(struct net_bridge *br);
void br_stp_port_timer_init(struct net_bridge_port *p);
unsigned long br_timer_value(const struct timer_list *timer);
/* br.c */
#if IS_ENABLED(CONFIG_ATM_LANE)
extern int (*br_fdb_test_addr_hook)(struct net_device *dev, unsigned char *addr);
#endif
/* br_netlink.c */
extern struct rtnl_link_ops br_link_ops;
int br_netlink_init(void);
void br_netlink_fini(void);
void br_ifinfo_notify(int event, struct net_bridge_port *port);
int br_setlink(struct net_device *dev, struct nlmsghdr *nlmsg, u16 flags);
int br_dellink(struct net_device *dev, struct nlmsghdr *nlmsg, u16 flags);
int br_getlink(struct sk_buff *skb, u32 pid, u32 seq, struct net_device *dev,
u32 filter_mask, int nlflags);
#ifdef CONFIG_SYSFS
/* br_sysfs_if.c */
extern const struct sysfs_ops brport_sysfs_ops;
int br_sysfs_addif(struct net_bridge_port *p);
int br_sysfs_renameif(struct net_bridge_port *p);
/* br_sysfs_br.c */
int br_sysfs_addbr(struct net_device *dev);
void br_sysfs_delbr(struct net_device *dev);
#else
static inline int br_sysfs_addif(struct net_bridge_port *p) { return 0; }
static inline int br_sysfs_renameif(struct net_bridge_port *p) { return 0; }
static inline int br_sysfs_addbr(struct net_device *dev) { return 0; }
static inline void br_sysfs_delbr(struct net_device *dev) { return; }
#endif /* CONFIG_SYSFS */
#endif