linux_dsm_epyc7002/drivers/usb/phy/phy-generic.c

385 lines
8.6 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* NOP USB transceiver for all USB transceiver which are either built-in
* into USB IP or which are mostly autonomous.
*
* Copyright (C) 2009 Texas Instruments Inc
* Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
*
* Current status:
* This provides a "nop" transceiver for PHYs which are
* autonomous such as isp1504, isp1707, etc.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/usb/usb_phy_generic.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include "phy-generic.h"
#define VBUS_IRQ_FLAGS \
(IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \
IRQF_ONESHOT)
struct platform_device *usb_phy_generic_register(void)
{
return platform_device_register_simple("usb_phy_generic",
PLATFORM_DEVID_AUTO, NULL, 0);
}
EXPORT_SYMBOL_GPL(usb_phy_generic_register);
void usb_phy_generic_unregister(struct platform_device *pdev)
{
platform_device_unregister(pdev);
}
EXPORT_SYMBOL_GPL(usb_phy_generic_unregister);
static int nop_set_suspend(struct usb_phy *x, int suspend)
{
struct usb_phy_generic *nop = dev_get_drvdata(x->dev);
if (!IS_ERR(nop->clk)) {
if (suspend)
clk_disable_unprepare(nop->clk);
else
clk_prepare_enable(nop->clk);
}
return 0;
}
static void nop_reset(struct usb_phy_generic *nop)
{
usb: phy: phy-generic: Fix USB PHY gpio reset Since commit e9f2cefb0cdc2ae ("usb: phy: generic: migrate to gpio_desc") a kernel hang is observed on imx51-babbage board: [ 1.392824] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.397975] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.403205] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.422335] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.432962] hub 1-0:1.0: USB hub found [ 1.437119] hub 1-0:1.0: 1 port detected This hang happens because the reset GPIO stays at logic level 0. The USB PHY reset gpio is defined in the dts file as: reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; , which means it is active low, so what the gpio reset pin needs to do in this case is the following: - Go to logic level 0 to reset the USB PHY - Stay at 0 for a bit - Go back to logic level 1 When switching to gpiod API we need to following according to Documentation/gpio/consumer.txt: "The first thing a driver must do with a GPIO is setting its direction. If no direction-setting flags have been given to gpiod_get*(), this is done by invoking one of the gpiod_direction_*() functions: int gpiod_direction_input(struct gpio_desc *desc) int gpiod_direction_output(struct gpio_desc *desc, int value)" Since no direction-setting flags have been given to devm_gpiod_get_optional() in our case, we need to use gpiod_direction_output to comply with the gpiod API. With this change the USB PHY reset performs a proper reset, the kernel boots fine and USB host is functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-28 22:19:17 +07:00
if (!nop->gpiod_reset)
return;
gpiod_set_value_cansleep(nop->gpiod_reset, 1);
usb: phy: phy-generic: Fix USB PHY gpio reset Since commit e9f2cefb0cdc2ae ("usb: phy: generic: migrate to gpio_desc") a kernel hang is observed on imx51-babbage board: [ 1.392824] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.397975] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.403205] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.422335] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.432962] hub 1-0:1.0: USB hub found [ 1.437119] hub 1-0:1.0: 1 port detected This hang happens because the reset GPIO stays at logic level 0. The USB PHY reset gpio is defined in the dts file as: reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; , which means it is active low, so what the gpio reset pin needs to do in this case is the following: - Go to logic level 0 to reset the USB PHY - Stay at 0 for a bit - Go back to logic level 1 When switching to gpiod API we need to following according to Documentation/gpio/consumer.txt: "The first thing a driver must do with a GPIO is setting its direction. If no direction-setting flags have been given to gpiod_get*(), this is done by invoking one of the gpiod_direction_*() functions: int gpiod_direction_input(struct gpio_desc *desc) int gpiod_direction_output(struct gpio_desc *desc, int value)" Since no direction-setting flags have been given to devm_gpiod_get_optional() in our case, we need to use gpiod_direction_output to comply with the gpiod API. With this change the USB PHY reset performs a proper reset, the kernel boots fine and USB host is functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-28 22:19:17 +07:00
usleep_range(10000, 20000);
gpiod_set_value_cansleep(nop->gpiod_reset, 0);
}
/* interface to regulator framework */
static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA)
{
struct regulator *vbus_draw = nop->vbus_draw;
int enabled;
int ret;
if (!vbus_draw)
return;
enabled = nop->vbus_draw_enabled;
if (mA) {
regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
if (!enabled) {
ret = regulator_enable(vbus_draw);
if (ret < 0)
return;
nop->vbus_draw_enabled = 1;
}
} else {
if (enabled) {
ret = regulator_disable(vbus_draw);
if (ret < 0)
return;
nop->vbus_draw_enabled = 0;
}
}
nop->mA = mA;
}
static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
{
struct usb_phy_generic *nop = data;
struct usb_otg *otg = nop->phy.otg;
int vbus, status;
vbus = gpiod_get_value(nop->gpiod_vbus);
if ((vbus ^ nop->vbus) == 0)
return IRQ_HANDLED;
nop->vbus = vbus;
if (vbus) {
status = USB_EVENT_VBUS;
otg->state = OTG_STATE_B_PERIPHERAL;
nop->phy.last_event = status;
/* drawing a "unit load" is *always* OK, except for OTG */
nop_set_vbus_draw(nop, 100);
atomic_notifier_call_chain(&nop->phy.notifier, status,
otg->gadget);
} else {
nop_set_vbus_draw(nop, 0);
status = USB_EVENT_NONE;
otg->state = OTG_STATE_B_IDLE;
nop->phy.last_event = status;
atomic_notifier_call_chain(&nop->phy.notifier, status,
otg->gadget);
}
return IRQ_HANDLED;
}
int usb_gen_phy_init(struct usb_phy *phy)
{
struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
int ret;
if (!IS_ERR(nop->vcc)) {
if (regulator_enable(nop->vcc))
dev_err(phy->dev, "Failed to enable power\n");
}
if (!IS_ERR(nop->clk)) {
ret = clk_prepare_enable(nop->clk);
if (ret)
return ret;
}
nop_reset(nop);
return 0;
}
EXPORT_SYMBOL_GPL(usb_gen_phy_init);
void usb_gen_phy_shutdown(struct usb_phy *phy)
{
struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
gpiod_set_value_cansleep(nop->gpiod_reset, 1);
if (!IS_ERR(nop->clk))
clk_disable_unprepare(nop->clk);
if (!IS_ERR(nop->vcc)) {
if (regulator_disable(nop->vcc))
dev_err(phy->dev, "Failed to disable power\n");
}
}
EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown);
static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
{
if (!otg)
return -ENODEV;
if (!gadget) {
otg->gadget = NULL;
return -ENODEV;
}
otg->gadget = gadget;
if (otg->state == OTG_STATE_B_PERIPHERAL)
atomic_notifier_call_chain(&otg->usb_phy->notifier,
USB_EVENT_VBUS, otg->gadget);
else
otg->state = OTG_STATE_B_IDLE;
return 0;
}
static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
{
if (!otg)
return -ENODEV;
if (!host) {
otg->host = NULL;
return -ENODEV;
}
otg->host = host;
return 0;
}
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
struct usb_phy_generic_platform_data *pdata)
{
enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err = 0;
u32 clk_rate = 0;
bool needs_vcc = false, needs_clk = false;
if (dev->of_node) {
struct device_node *node = dev->of_node;
if (of_property_read_u32(node, "clock-frequency", &clk_rate))
clk_rate = 0;
needs_vcc = of_property_read_bool(node, "vcc-supply");
needs_clk = of_property_read_bool(node, "clocks");
nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
GPIOD_ASIS);
err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
if (!err) {
nop->gpiod_vbus = devm_gpiod_get_optional(dev,
"vbus-detect",
GPIOD_ASIS);
err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
}
} else if (pdata) {
type = pdata->type;
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
if (gpio_is_valid(pdata->gpio_reset)) {
err = devm_gpio_request_one(dev, pdata->gpio_reset,
GPIOF_ACTIVE_LOW,
dev_name(dev));
if (!err)
nop->gpiod_reset =
gpio_to_desc(pdata->gpio_reset);
}
nop->gpiod_vbus = pdata->gpiod_vbus;
}
if (err == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (err) {
dev_err(dev, "Error requesting RESET or VBUS GPIO\n");
return err;
}
if (nop->gpiod_reset)
gpiod_direction_output(nop->gpiod_reset, 1);
nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
GFP_KERNEL);
if (!nop->phy.otg)
return -ENOMEM;
nop->clk = devm_clk_get(dev, "main_clk");
if (IS_ERR(nop->clk)) {
dev_dbg(dev, "Can't get phy clock: %ld\n",
PTR_ERR(nop->clk));
if (needs_clk)
return PTR_ERR(nop->clk);
}
if (!IS_ERR(nop->clk) && clk_rate) {
err = clk_set_rate(nop->clk, clk_rate);
if (err) {
dev_err(dev, "Error setting clock rate\n");
return err;
}
}
nop->vcc = devm_regulator_get(dev, "vcc");
if (IS_ERR(nop->vcc)) {
dev_dbg(dev, "Error getting vcc regulator: %ld\n",
PTR_ERR(nop->vcc));
if (needs_vcc)
return -EPROBE_DEFER;
}
nop->dev = dev;
nop->phy.dev = nop->dev;
nop->phy.label = "nop-xceiv";
nop->phy.set_suspend = nop_set_suspend;
nop->phy.type = type;
nop->phy.otg->state = OTG_STATE_UNDEFINED;
nop->phy.otg->usb_phy = &nop->phy;
nop->phy.otg->set_host = nop_set_host;
nop->phy.otg->set_peripheral = nop_set_peripheral;
return 0;
}
EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
static int usb_phy_generic_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usb_phy_generic *nop;
int err;
nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
if (!nop)
return -ENOMEM;
err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
if (err)
return err;
if (nop->gpiod_vbus) {
err = devm_request_threaded_irq(&pdev->dev,
gpiod_to_irq(nop->gpiod_vbus),
NULL, nop_gpio_vbus_thread,
VBUS_IRQ_FLAGS, "vbus_detect",
nop);
if (err) {
dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
gpiod_to_irq(nop->gpiod_vbus), err);
return err;
}
nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ?
OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE;
}
nop->phy.init = usb_gen_phy_init;
nop->phy.shutdown = usb_gen_phy_shutdown;
err = usb_add_phy_dev(&nop->phy);
if (err) {
dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
err);
return err;
}
platform_set_drvdata(pdev, nop);
return 0;
}
static int usb_phy_generic_remove(struct platform_device *pdev)
{
struct usb_phy_generic *nop = platform_get_drvdata(pdev);
usb_remove_phy(&nop->phy);
return 0;
}
static const struct of_device_id nop_xceiv_dt_ids[] = {
{ .compatible = "usb-nop-xceiv" },
{ }
};
MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
static struct platform_driver usb_phy_generic_driver = {
.probe = usb_phy_generic_probe,
.remove = usb_phy_generic_remove,
.driver = {
.name = "usb_phy_generic",
.of_match_table = nop_xceiv_dt_ids,
},
};
static int __init usb_phy_generic_init(void)
{
return platform_driver_register(&usb_phy_generic_driver);
}
subsys_initcall(usb_phy_generic_init);
static void __exit usb_phy_generic_exit(void)
{
platform_driver_unregister(&usb_phy_generic_driver);
}
module_exit(usb_phy_generic_exit);
MODULE_ALIAS("platform:usb_phy_generic");
MODULE_AUTHOR("Texas Instruments Inc");
MODULE_DESCRIPTION("NOP USB Transceiver driver");
MODULE_LICENSE("GPL");